|
1-Bay SATA NAS Server
NAS-7100
Quick Installation Guide
Version:1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank. you. for. purchasing. PLANET. 1-Bay. SATA. NAS. Server,. NAS-7100.. In. this.
installation.guide,.it.illustrates.the.simply.installation.for.user.to.install.a.HDD.and.
install. NAS-7100. to. Windows. system.. For. more. information,. please. also. refer. to.
the.User’s.manual.in.our.CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
System
Package Contents
The.following.items.should.be.included.in.the.NAS65.packaging.
If. any. of. these. items. are. damaged. or. missing,. please. contact. your. dealer. for.
replacements.
•. NAS-7100
•. Quick.Installation.Guide
•. Setup.CD
•. Ethernet.Cable.
•. Power.Adapter.with.Power.Core
System Requirements
•. Windows.95,.98,.ME,.NT.4.0,.2000/2003,.XP.or.Vista.
•. Ethernet.Network.employing.10BaseT,.100BaseTX.or.1000BaseT.
•. TCP/IP.protocol.
Front Panel
Rear Panel
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
HDD Install/Remove
The.NAS-7100.supports.one.3.5-inch.Serial-ATA.(SATA).hard.drive..NAS-7100.does.
not support low profile or half high hard drive.
HDD Install
1..Make.sure.the.NAS-7100.is.powered.off
2..Open.top.cover.of.NAS-7100
3..Make.sure.your.hard.drive.is.SATA.interface.and.make.sure.you.back.up.all.pre-
existing.data.before.use.it.on.NAS-7100
4..Pull.up.the.HDD.tray.then.slide.and.push.the.HDD.into.the.tray,.make.sure.con-
nector.well.connecting
5..Push.down.the.HDD.tray
6. Put the top cover of NAS-7100 back to finish HDD install
HDD Remove
1..Make.sure.the.NAS-7100.is.power.off.
2..Open.top.cover.of.NAS-7100
3..Pull.up.the.HDD.tray,
4..Pull.out.the.HDD.till.SATA.connector.release.then.the.HDD.can.slide.out.of.HDD.
tray
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation
Boot up
1..Connect. the. network. cable. to. LAN. port. on. the. rear. of. NAS-7100.. Connect. the.
others.end.to.your.hub.or.switch.
2..Connect. the. supplied. power. adapter. to. a. power. outlet. and. plug. the. power. cord.
into.NAS-7100’s.power.input.on.the.rear.panel.
3..Power.on.
.
Locate. the. NAS-7100’s. power. switch. on. the. NAS-7100. real. panel.. Press. it. once.
to.power.on.the.NAS
4..The.NAS-7100.self-test.
.
The. NAS-7100. will. run. a. brief. self-test.. During. the. self-test,. all. of. NAS-7100’s.
LED will be illuminated or flashing.
5..Booting.up.
.
When.the.self-test.is.complete,.boot.up.will.start..The.Ready.LED.will.blink.con-
tinuously,. and. the. LAN. LED. will. blink. occasionally.. Boot. up. should. take. approxi-
mately.1-3.minutes.
6..Boot.up.completed.
.
When.the.Ready.LED.stops.blinking,.and.remains.on,.boot.up.is.complete..If.the.
Status. (Orange). LED. stays. on,. or. if. the. NAS-7100. repeatedly. beeps,. there. is.
a. hardware. problem.. Consult. the. Troubleshooting. section. of. the. User. Guide. for.
possible.solutions.
Shutdown
To. shutdown. the. NAS-7100,. press. the. power. switch. to. start. the. shutdown.
sequence..Wait.for.all.LEDs.to.turn.off.
Removing a USB device
1..Press.the.USB.eject.button.(for.USB.1.or.2).on.the.rear.panel.
2..Wait.for.the."USB".LED.turn.off.
3..Remove.the.USB.device.
You.can.also.use.the.Windows.utility.installed.from.the.CD-ROM:
1..Select.“Safely.Remove.USB.Device".
2..Select.the.desired.NAS.and.USB.device,.and.click.the."Eject".button.
3..Wait.for.the.message.telling.you.it.is.safe.to.remove.the.USB.device.
If. the. USB. device. is. not. removed,. it. will. not. be. re-connected.. You.
must.remove.and.re-insert.the.USB.device.to.have.it.re-connected.
Note
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
•. This.procedure.only.needs.to.be.done.ONCE,.by.the.NAS-7100’s.Administrator.
•. Other. LAN. users. should. follow. the. advice. given. in. using. your. NAS. described. in.
the.following.section.
Quick Setup with the NAS Wizard
1..Please. insert. User’s. Manual. and. Utility. CD. into. the. CD-ROM. drive. to. initiate. the.
autorun.program..Once.completed.a.menu.screen.will.appear.
2..Click. on. “Initial. Utility”. hyper. link. to. initiate. the. installation.. If. the. autorun. pro-
gram. is. not. process. in. your. PC,. you. can. click. the. “Start”. button. and. choose.
“Run”..(Suppose.“E”.is.your.CD-ROM.drive)..When.the.dialog.box.appears,.enter.
“E:\Utility\Setup.exe”.and.press.enter.key..You.will.see.the.dialog.box.as.below..
Please.click.the.“Setup”.button..
3..After. click,. you. will. see. the. screen. as. below.. The. utility. will. auto. search. your.
network and find out your NAS-7100.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
A. list. of. all. the. NAS-7100s. on. your. network. will. show. on. the. left. side.. The. right.
side.displays.details.of.the.currently.selected.NAS-7100..
If.the.desired.NAS-7100.is.not.listed,.check.the.following:
• The NAS-7100 has finished the start up and boot process.
•. Your.PC.and.the.NAS-7100.are.on.the.same.IP.segment.
•. Click.“Refresh”.button.to.search.again.
Otherwise,.select.the.desired.NAS-7100,.and.click.the."Next".button.
4..The. following. screen. will. then. be. displayed.. You. can. set. the. IP. settings. in. this.
screen. Please click “Next” after the configured.
Obtain an IP address
Select.this.only.if.your.LAN.has.a.DHCP.Server..
automatically (DHCP
Client)
This.option.is.recommended..You.need.to.enter.the.
following.data.
•. IP.address.-.The.utility.will.suggest.a.unused.IP.
address.within.the.address.range.used.on.your.
LAN..If.you.wish,.you.can.change.this,.but.you.
must.ensure.the.address.is.unused.
•. Network.Mask.-.This.must.match.the.value.used.
by.PCs.on.your.LAN.
Fixed IP Address
•. Gateway.-.This.must.match.the.value.used.by.PCs.
on.your.LAN.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
5. You can configure the time settings in this screen. Please click “Next” after the
configured.
The.Default.Name.is.shown..You.may.change.this.if.
you.wish.
Server Name
Normally,.this.name.should.match.the.Workgroup.
Workgroup Name
name.used.by.PCs.on.your.LAN.
Select.your.time.zone.from.the.list.
Time Zone
Enter.the.local.date.(mm/dd/yyyy.format).and.time.
Local Date/Time
6. Please check the configured settings of this screen, if all the configure are cor-
rect..Please.click.“Save”.button..
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
7..After.click."Save",.you.will.see.the.dialog.box.to.prompt.you.again..Please.click.
“OK”.to.save.or.click.“Cancel.to.check.the.settings..
8..If.you.would.like.to.install.“Flash-Map”.to.helps.you.to.mapping.NAS-7100.now,.
please. click. “Yes”. and. refer. to. the. manual. in. our. bundled. CD. disk,. otherwise,.
please click “No” to finish the configuration, then close the initial utility.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your NAS-7100
To Use the NAS storage
1..Open.Network.Neighborhood.(or.My.Network.Places).
2..Locate. the. NAS-7100.. If. it. is. not. listed,. double-click. Entire. Network.. Then. dou-
ble-click.the.Workgroup.that.the.NAS-7100.is.in..(By.default,.the.NAS-7100.is.in.
Workgroup.)
3..Double. click. on. the. NAS-7100. icon.. You. will. then. see. a. list. of. shares. (shared.
folders). You can read and write files to these shares, unless the NAS-7100 ad-
ministrator.has.blocked.access.
4..To.create.a.shortcut.to.an.NAS-7100.folder,.drag.its.icon.to.the.desktop,.and.ac-
cept.Windows.offer.to.create.a.shortcut.
Mapping a Network Drive
1..Right-click.on.the.desired.share.
2..On.the.pop-up.menu,.select."Map.Network.Drive...".
3..Select.a.drive.letter.for.this.folder,.check.the.Reconnect.at.Logon.checkbox,.then.
click.“OK”.
4..This.drive.will.now.be.available.in.Windows.Explorer,.and.from.the.File-.Open.or.
File-Save.As.dialog.in.all.Windows.applications.
Using the Web Interface
The.Web.interface.of.the.NAS-7100.has.three.major.functions:
•. Users.may.change.their.password.to.match.their.Windows.Logon.
•. Server. management. can. be. performed.. Default. ID. is. “admin”. and. default. pass-
word.is.empty
•. Download.manager.
To connect to the NAS with your Web Browser
1..In. your. Browser's. Address. or. Location. bar,. enter. "HTTP://". and. the. NAS-7100.
Server’s. IP. Address.. (To. connect. via. the. Internet,. additional. setup. is. required..
See.the.User.Manual.for.details.)
2. To browse the files and folders on the NAS-7100, click Disk (Public data) or Flash
(Public.Data).on.the.main.screen.
3. To view or download a file, click on its name. To download any file, right-click its
name.and.choose.“Save.target.as...”
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Configuration
If. you. want. to. set. more. detail. settings. of. NAS-7100,. please. refer. to. our. manual.
and configure with your Web Browser. If you have any difficulty on resolving the
problem.while.installing.or.using.NAS-7100,.please.feel.free.to.contact.PLANET.for.
support.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|