Planar PT150MandPT150MUUser's Manual www.planar.com
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Table of Contents
Usage Notice
Safety and Use............................................................................ 2
Introduction
About the Product ....................................................................... 3
Package Overview ...................................................................... 4
Installation
Product Overview........................................................................ 5
VESA Mount your monitor .......................................................... 7
Start Your Installation .................................................................. 8
User Controls
Front Panel Controls ................................................................... 11
How to Use the OSD Menus ....................................................... 12
On-Screen Display Menus.......................................................... 13
Appendix
Troubleshooting ........................................................................... 17
Warning Signal ............................................................................ 18
Product Dimensions.................................................................... 19
Compatibility Modes ................................................................... 20
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Safety and Use
Follow all warnings, precautions and maintenance as recom-
mended in this User’s Manual to maximize the life of your monitor.
Do:
ꢀ Turn off the product before cleaning.
ꢀ Use only a dry soft cloth or clean room wiper when cleaning the
LCDpanel surface.
ꢀ Use a soft cloth moistened with mild detergent to clean the
display housing.
ꢀ Use only high-quality and safety-approved AC/DC power adapter.
ꢀ Disconnect the power plug from AC outlet if the product is not
used for a long period of time.
Don’t:
ꢀ Do not touch the LCD panel surface with sharp or hard objects.
ꢀ Do not use abrasive cleaners, waxes or solvents for cleaning.
ꢀ Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Introduction
About the Planar’s PT150M/PT150MU
This is a 15” flat panel screen with an active matrix, thin-film transistor
(TFT), liquid crystal display (LCD).
The monitor features include:
ꢀ Direct analog signal input
ꢀ Active matrix TFT LCD technology
ꢀ 1024 x 768 XGA resolution
ꢀ 15” viewable display area
ꢀ 31.5 ~ 60 kHz horizontal scan
ꢀ 56 ~ 75 Hz refresh rate
ꢀ VESA mount holes (the stand is removable for flexible mounting)
ꢀ Auto-adjustment function
ꢀ Multilingual OSD user controls
ꢀ VESADPMS power saving
ꢀ Built-in speakers for multimedia applications
ꢀ Kensingston security lock slot
ꢀ Durable, resistive touchscreen
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Package Overview
LCD Display
Power Cord
Power Adapter
RS-232 Series Cable
(for PT150M )
Audio-In Cable
VGA Signal Cable
USB Cable
User’s Manual
Quick Start Guide
(forPT150MU)
TouchscreenDriver
Planar CD
Installation CD-ROM
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Installation
Product Overview
ꢀ
Front View
LCD Display
Panel
Controls
Speakers
Stand
ꢀ
Rear View
Connector Ports “A”
(Inside the back cover)
Connector
Ports “B”
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ꢀ
Connector Ports “A”
DC
Power-In
Audio
input
VGA input
ꢀ
Connector Ports “B”
RS-232
(For PT150M)
USB
(For PT150MU Touchscreen)
Touch Function
Download from Www.Somanuals.com. All Manuals Search And Download.
7
ꢀ
Kensington Security Slot
The monitor can be secured to your desk or any other fixed object with
Kensington lock security products. Kensington lock is not included.
Kensington Security Slot
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ꢀ
VESA Mount your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical Mount
ing Interface Standard which defines a physical mounting interface for flat
panel monitors, and corresponding standards for flat panel monitor mount
ing devices, such as wall and table arms.The VESA mounting interface is
located on the back of your monitor.
To mount the monitor on a swing arm or other mounting fixture, follow
the instruction included with the mounting fixture to be used.
Slots
75mm
VESA
Mounting
75mm
Interface
Note!
Please select the proper screws!
The depth from plastic back cover to the bottom of the screw hole is
8mm. The spec is M4 screw.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Start Your Installation
ꢀ
Remove the Back Cover
Please follow these instructions to remove the cover on the back panel of the
LCD so that you can connect the cables in ”Connector Ports B.”
A
Back Cover
1. To remove the back cover, follow the arrows in Figure A and press with
both your thumbs. The cover should be removed by pressing firmly.
2. Follow the instruction on P.11 (Figure 11.1) to connect the cables in
”Connector Ports B.”
3. Fix the cover back to the LCD. You may also keep the cables in order
with the included cable organizer.
Included Cable
Organizer
Note: You can place the LCD flat horizontally to make it easier to
connect the cables. Please make sure that you place it on an even
surface lest the LCD should be damaged by scratches or collision.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
ꢀ
Connecting the Display (Figure 11.1)
To setup this display, please refer to the following figure and procedures.
1. Be sure the computer and monitor are turned off.
2. Connect the DC power cord to the power connector; plug one end of
the AC power cord into the poweradapter, and then the other end into an
electrical outlet(ꢁ).
3. Connect the VGA signal cable from display VGA input connector to the
15-pin connector of your host computer and tighten the screws(ꢂ).
4. Connect the Audio-In cable from audio input port of your display to the
Audio-out port of your computer(ꢃ).
5. Connect the RS-232 cable from RS-232 port of your display to the
RS-232 port of your computer(ꢄ).
6. Turn on your computer, display and video source.
Notice: To ensure the LCD display can work well with your computer,
please configure the display mode of your graphic card to make it
less than or equal to 1024 x 768 resolution and make sure timing
of the display mode is compatible with the LCD display.
We have listed the “Compatibility Modes” of this LCD display in
appendices for your reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Figure 11.1
ꢃ
Audio-In
Cable
ꢀ
VGA
Cable
ꢂ
RS232
Cable
ꢁ
Power
Adapter
& Power
Cord
Download from Www.Somanuals.com. All Manuals Search And Download.
12
User Controls
Front Panel Controls
AUTO
SELECT
MENU
ꢀ
ꢅ
ꢁ
ꢂ
ꢃ
ꢄ
No./ Icon
Control
Function
ꢀ MENU
Menu button
Display the OSD menus
ꢁ SELECT/AUTO Select/Auto
Select- To select the adjustment items
from OSD menus.
Auto- To activate the “Auto Adjustment”
function to obtain an optimum image.
ꢂ
ꢃ
Brightness Minus/
Minus
1.Decreases the brightness of
the display image.
2.Decreases value of the
adjustment items.
3
4
Brightness Plus/
Plus
1.Increases the brightness of the
display image.
2.Increases value of the
adjustment items.
ꢄ
ꢅ
Power Switch
Power LED
Switches on/off the power of the LCD
display.
1.Green indicates the display is turned on.
2. Amber indicates the display is in
power-saving mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
How to Use the OSD Menus
1. Press the “Menu” button to pop up the on-screen menu and to select
between the four Main Menus.
2. Choose the adjustment items by pressing the “Select/Auto” button.
3. Adjust the value of the adjustment items by pressing the “ ” or “
”
4
3
button.
4. The OSD menu will automatically close, if you have left it idle for a
pre-set time.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
On-Screen Display Menus
First OSD Menu:
Main Menu
Page 1
Auto-Adjustment
Contrast
Horizontal Position
Vertical Position
Frequency
Tracking
Yes
No
4 Auto-Adjustment
Choose this function to obtain an optimum image.
4 Contrast
This function allows you to adjust the image crispness. Contrast adjusts
the difference between white and black shades.
4 Horizontal Position
Changes the horizontal position of the image.
4 Vertical Position
Changes the vertical position of the image.
4 Frequency
Changes the display data frequency to match the frequency of your graphic
card. When you are experiencing vertical flickering bar, use this function to make
an adjustment.
4 Tracking
Synchronizes the signal timing of the display to that of the graphic card.
When you are experiencing unstable to flickering image, use this function
to make an adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Second OSD Menu:
Main Menu
Page 2
Display Mode
OSD Off-Time
Language
Text-Graphic
Reset
1024* 768
FH: 60
FV: 75
kHz (+)
Hz (+)
4 Display Mode
The display mode shows the display resolution, horizontal scan frequency,
and vertical refresh of the current mode.
4 OSD Off-Time
Adjusts the time period for OSD menu to disappear.
4 Language
You are able to select the language of all menu items.
4 Text-Graphic
Toggles between VGAtext mode (mode M03H) and graphic mode (mode M13H).
4 Reset
Returns the display parameters of the current mode to its factory default
settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Third OSD Menu:
Main Menu
Page 3
Volume
Mute
-
+
0
20
40
4 Volume
It allows you to control the volume sound.
4 Mute
It allows you to disable the sound immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Fourth OSD Menu:
Main Menu
Page 4
Color Setting
Color Adjustment-Red
Color Adjustment-Green
Color Adjustment-Blue
9300K
6500K
Preset
Custom
4 Color Setting
Adjusts the color temperature.
4 Color Adjustment-Red
It allows you to adjust the red color of the display.
4 Color Adjustment-Green
It allows you to adjust the green color of the display.
4 Color Adjustment-Blue
It allows you to adjust the blue color of the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the
following. If the problem persists, please contact your local dealer or
our service center.
Problem: No image appears on screen.
Check that all the I/O and power connectors are correctly and
4
well connected as described in the “ Installation ” section.
4 Make sure the pins of the connectors are not crooked or broken.
Problem: Partial image or incorrectly displayed the image.
Check to see if the resolution of your computer is higher than that
4
of the LCD display.
4 Reconfigure the resolution of your computer to make it less than
or equal to 1024 x 768
Problem: Image has flickering vertical line bars.
Use “ Frequency ” to make an adjustment.
4
4
Check and reconfigure the display mode of the vertical refresh rate of your
graphic card to make it compatible with the LCD display.
Problem: Image is unstable and flickering
Use “ Tracking ” to make an adjustment.
4
Problem: Image is scrolling
Check and make sure the VGA signal cable (or adapter) is well connected.
4
Check and reconfigure the display mode of the vertical refresh rate of your
4
graphic card to make it compatible with the LCD display.
Problem: Vague image (characters and graphics)
Use “ Frequency ” to make an adjustment. If this problem still exists, use
4
“Tracking” to make an adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Warning Signal
If you see warning messages on your LCD screen, this means that the
LCD display cannot receive a clean signal from the computer graphics
card.
There may be three sources for this problem. Please check
the cable connections or contact Planar for more information.
4 No Signal
This message means that the LCD display has been powered on but it cannot
receive any signal from the computer graphic card. Check all the power switches,
power cables, and VGA signal cable.
4 Going to Sleep
This message means that the LCD display is under the power saving mode. In
addition, the LCD display will go to this sleeping mode when experiencing a
sudden signal disconnecting problem.
4 Unsupport Mode
This message means that the signal of the computer graphic card is not compat
ible with the LCD display. When the signal is not included in the compatibility
mode we have listed in the Appendices of this manual, the LCD display will
appear this message.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Product Dimensions
382.5mm/15.06”
384.3mm/15.1”
Front View
56.8mm/2.23”
Side View
180.1mm/7.1”
Top View
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Compatibility Modes
H.Frequency
(kHz)
V.Frequency
(Hz)
Resolution
Mode
IBM VGA
IBM VGA
IBM VGA
IBM VGA
VESA VGA
VESA VGA
640 x 350
640 x 400
640 x 480
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
70
70
60
70
72
75
56
60
72
31.5
31.5
31.5
31.5
37.9
37.5
35.2
37.9
48.1
VESA SVGA
VESA SVGA
VESA SVGA
VESA SVGA
800 x 600
75
46.9
VESA XGA
VESA XGA
VESA XGA
Apple Mac
Apple Mac
Apple Mac
Apple Mac
1024 x 768
1024 x 768
1024 x 768
640 x 480
640 x 480
832 x 624
1024 x 768
60
70
75
67
67
75
75
48.4
56.5
60.0
34.9
35.0
49.7
60.2
Download from Www.Somanuals.com. All Manuals Search And Download.
|