Installation and Assembly -
Solid•Point™ Universal Adapter bracket for Large Flat Panel Screens
Model:
PLP UN-1
PARTSLIST
Parts List
BB
PART #
QTY.
DESCRIPTION
AA 200-0333
BB 200-1302
CC 520-1151
DD 540-9440
EE 520-1050
F F 520-1064
GG 520-1156
HH 520-1068
1
2
4
6
6
8
8
6
4
8
4
1
4
adapter bracket
CC
AA
vertical bracket
10-32 x 3/8" serrated head socket pin screw
1/4" washer
M6 x 1 x 12 mm socket pin screw
M5 x .8 x 12 mm socket pin screw
M4 x .7 x 10 mm serrated socket pin screw
M8 x 1.25 x 15mm socket pin screw
M8 x 25 mm socket pin screw
#10 washer
KK
DD
II
520-1101
JJ
JJ 540-9400
KK 540-1015
LL 560-9646
M M 520-1152
1/2" spacer
security allen wrench
M8 x 40 mm socket pin screw
II
Some parts may appear slightly different than illustrated.
HH
LL
MM
EE
FF
GG
For easier reference during assembly all fasteners on this page are scaled 1:1
To assemble the adapter bracket (AA) to your flat screen product, please refer to the compatibility chart and configurations
table on accompanying screen compatibility chart. First, locate your flat screen product in the compatibility chart using the
manufacturers name and model number. Next, note the configuration letter shown in the far right hand column. Finally, use
the configurations table, which appears after the compatibility chart, to determine the correct mounting hardware for your
flat screen product.
1 of 4
ISSUED: 09-09-02 SHEET #: 200-9432-12 07-14-05
For customer service call 1-800-729-0307 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set a cloth on the floor to prevent scratching the screen. Place the screen on the floor face down. If the screen has
knobs on the back, remove them. Place adapter bracket (AA) on the center of the screen. Slide the vertical
brackets (BB) along the c-channels of the adapter bracket (AA) until the slots on the back of the vertical brackets
(BB) are aligned to the holes on the back of the screen. Fasten vertical brackets (BB) to c-channels using four
10-32 x 3/8" serrated head socket pin screws (CC).
2
Note: Do not fully tighten the screws (CC) to allow the adapter bracket to slide along the vertical brackets (BB)
freely.
BB
c-channel
CC
BB
3 of 4
ISSUED: 09-09-02 SHEET #: 200-9432-12 07-14-05
For customer service call 1-800-729-0307 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide the vertical brackets (BB) along the c-channels of the adapter bracket (AA) until the slots on the back of the
vertical brackets (BB) are aligned to the holes on the back of screen. Fully tighten the four 10-32 x 3/8" serrated
head socket pin screws (CC) which hold the vertical brackets (BB) to the c-channels. Refer to the accompanying
screen compatibility chart to determine the proper fasteners to use. Attach the assembled adapter bracket to the
back of the screen using screws, upper and lower spacers as pictured. Verify that all holes are properly aligned,
then use the security allen wrench (LL) to tighten the screws.
3
Note: See figure 5 below for slot sizes.
Example: For a Toshiba model 50 HP82 50" screen, attach the vertical brackets (BB) to the screen using eight
M4 x 10 mm serrated socket pin screws (GG) or M5 x 12 mm socket pin screws (FF) through the small slots on the
vertical brackets (BB). Please refer to the corresponding configuration note for more details. Upper spacers (JJ) are
required for this configuration.
BB
SCREWS
AA
C-CHANNNEL
UPPERSPACERS
LOWERSPACERS
fig. 5
Mounting Slots
SMALLSLOTSAREUSED
FORM4ANDM5SCREWS.
LARGESLOTSAREUSED
FORM6ANDM8SCREWS.
MOUNTINGSLOTS:SMALL
MOUNTINGSLOTS:LARGE
4 of 4
ISSUED: 09-09-02 SHEET #: 200-9432-12 07-14-05
©2004PeerlessIndustries,Inc. Allrightsreserved.
For customer service call 1-800-729-0307 or 708-865-8870.
PeerlessisaregisteredtrademarkandSolid•Point isatrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|