Planar Computer Monitor ND1750 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Contents ..............................................................................................................1  
Preface ................................................................................................................2  
Installation ...........................................................................................................4  
Unpacking ...............................................................................................................................................................................4  
Desktop Installation.............................................................................................................................................................4  
Connecting the Network Display and Base................................................................................................................4  
Viewing Angle Adjustment...............................................................................................................................................4  
Alternate Mounting Solutions.........................................................................................................................................5  
Detaching Network Display from Its Stand ................................................................................................................5  
Interface for Arm/ Wall Mount Applications..............................................................................................................5  
Connecting the Display to Your Network ...................................................................................................................5  
Connecting User Devices...................................................................................................................................................6  
Connecting the AC Power.................................................................................................................................................6  
Setting Up the Network Display .....................................................................................................................................6  
Display Controls ..................................................................................................7  
User Controls..........................................................................................................................................................................7  
Power Modes..........................................................................................................................................................................8  
Adjusting the Display..........................................................................................................................................................8  
Function Description...........................................................................................................................................................8  
Technical Information..........................................................................................9  
Specifications.........................................................................................................................................................................9  
Supported Display Resolutions.................................................................................................................................... 10  
Troubleshooting.................................................................................................11  
End User License Agreement (“License”).........................................................12  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
This manual is designed to assist users in setting up and using the Integrated Thin Client Network Display (Network Display).  
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the  
contents. The information in this document is subject to change without notice. This document contains proprietary  
information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,  
electronic or other means, in any form, without prior permission of the manufacturer.  
FCC Statement Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the  
instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reposition or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced monitor technician for help.  
Warning  
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or  
modifications not expressly approved by the party responsible for compliance could void your authority to  
operate the equipment.  
This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This device  
may not cause harmful interference. (2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Canadian DOC Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
Please read the following instructions carefully. This manual should be retained for future use.  
1. To clean the Network Display screen;  
-- Power off the Network Display and unplug the AC Cord.  
-- Spray a non-solvent cleaning solution onto a soft cloth.  
-- Gently clean the screen with dampened cloth.  
2. Do not place the Network Display near a window. Exposing the display to rain water, moisture or sunlight  
can severely damage it.  
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.  
4. Do not remove the cover or attempt to service this unit yourself. Servicing of any nature should be  
performed by an authorized technician.  
5. Store (not connected to the AC power source) the Network Display in a room with a room temperature of  
-20° ~ 60°C (or -4° ~ 140°F). Storing the Network Display outside this range could result in permanent  
damage.  
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.  
AC Power cable is frayed or damaged.  
Liquid is spilled into the Network Display or it has been exposed to rain.  
LCD display or the Network Display case is damaged.  
7. Only use the supplied main lead (AC Power Cord) to connect the monitor. For a nominal current up to 6A  
and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.  
Important Recycle Instruction:  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED  
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE  
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT  
WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK  
WWW.LAMPRECYCLE.ORG.  
Contains Mercury, Dispose of Properly  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Unpacking  
Before unpacking the Network Display, prepare a suitable workspace for your Monitor and computer. You need  
a stable and clean surface near a wall power outlet. Make sure that Network Display has enough space around it  
for sufficient airflow. Though the Network Display uses very little power, some ventilation is needed to ensure  
that the Monitor does not become too hot.  
After you unpack the Network Display, make sure that the following items were included in the box:  
Network Display  
Power Cord  
User's Guide  
Desk Stand Base  
PS2 Mouse  
USB Keyboard  
If you find that any of these items are missing or appear damaged, contact Planar immediately.  
Register Your Planar Products Today  
Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services,  
register your Planar product today. Visit our website to register your product at  
Cables, Replacement Lamps and Accessories  
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touchscreen or other  
Desktop Installation  
Connecting the Network Display and Base  
When you open the box to take the base and put on the  
desk first. Then connect the Network Display and base  
please.(See fig.1-1 )  
Figure 1-1  
Viewing Angle Adjustment  
The Network Display is designed to allow users to have a  
comfortable viewing angle. The viewing angle can be  
adjusted from -5°to +20°.(See fig. 1-2)  
Figure 1-2  
Warning  
Do not force the Network Display over its maximum viewing angle settings as stated above. Attempting to do so will result  
in damaging the Network Display and Display Stand.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alternate Mounting Solutions  
Detaching Network Display from Its Stand  
Unscrew screws n the swivel base support column and  
pull downo the hinge to release.  
Figure 1-3  
Interface for Arm/ Wall Mount Applications  
Before installing to mounting device, please refer to Fig.1-3.  
The rear of this LCD display has four integrated 4 mm, 0.7 pitch  
threaded nuts, as well as four 5 mm access holes in the plastic covering  
as illustrated in Figure 1-4. These specifications meet the VESA Flat  
Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1  
and 2.1.3, version 1, dated 13 November 1997).  
Note: M4mm x 11mm (L) screws should be used for a 3mm thick  
mounting plate application. Thicker plates should use  
appropriately longer screws. The screw threads should extend  
between 8 and 10 mm beyond the display surface of the mounting  
plate. Follow the mounting device manufacturer’s  
reccomendations.  
Figure 1-4  
Connecting the Display to Your Network  
1. Make sure the AC Power Cord is disconnected  
2. Connect one end of the Ethernet cable to the Network Display’s  
Ethernet (ENET) port. (See Fig 1-5)  
3. Verify that the other end of the Ethernet cable is connected to  
your LAN/WAN network.  
4. Make sure connections are secure and that the Ethernet  
connectors have clickedinto place.  
Figure1-5  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting User Devices  
1. USB devices such as the Keyboard can be connected to ports on  
the side or bottom (See Fig. 1-6 and Figure 1-7)  
2. The unit may be secured through the use of Kensington locking  
devices. (See Figure 1-6)  
3. The Headset/Handset port (RJ22)  
is reserved for future  
use with VOIP software support tools. It is designed for  
connection to analog telephone headsets or handsets. We  
recommend only the use of a UL or other safety agency  
approved device.  
Caution: This is not a telephone modem connection and should  
not be connected to a telephone line. Damage to the unit might  
occur.  
Figure 1-6  
4. The PS2 Mouse connects to the PS2 connector on the right end  
of the keyboard.  
5. A stereo headphone may be connected to the front of the  
Figure 1-7  
Network Display  
Connecting the AC Power  
1. Connect the power cord to the AC adapter (See Fig. 1-8)  
2. Connect the AC adapter’s DC output connector to the DC  
Power Jack of the display.  
3. Connect the power cord to a 100-240 VAC, 50/60Hz power  
source.  
Figure 1-8  
Setting Up the Network Display  
1. Make sure the AC power cord is connected to the Power Adapter.  
2. Press the Network Display's power switch, located on the bezel of the monitor. (See Figure 2-1)  
3. After power-on, the thin client will boot and commence a series of tests and communication checks which  
will be shown in the System Information Event Log.  
4. For the Network Display to properly connect to your network and applications servers, the Network Display  
and your network environment must be appropriately configured. Please contact your Information  
Technology specialist for further details.  
5. A detailed User Guide and Administrators Guide for the Wyse Thin Client Operating System (WTOS) may be  
obtained at http://www.planar.com/support/ for this product model number.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display Controls  
User Controls  
A brief description and the location of all Network Display functions controls and indicators:  
5 4  
3 2  
1
Figure 2-1  
Power Control - LED  
Modes are changed by pressing the Power Control Button (Please refer to  
Figure 2-2)  
1
Brightness Function / Adjust increase  
Brightness Function / Adjust decrease  
Audio Volume Function / Adjust increase  
Audio Volume Function / Adjust decrease  
2
3
4
5
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Modes  
The Network Display has three modes of operation.  
Figure 2-2  
The following assumes the AC Power Adapter is connected to the display and an AC power source.  
Power Mode  
LED  
Operation Description  
Power button is pressed for 3 Sec while in Standby mode (Thin  
client is switched off)  
Power button is pressed for 3 Sec while in Run mode (Thin client  
and display are switched off)  
Off  
Dark  
1
Caution: Be very careful to not turn off the Display while the operating  
system is downloading a software update!  
If the Power button is momentarily pressed when in the Off mode  
the display is powered and the thin client will boot.  
If the Power button is momentarily pressed while in Standby  
mode, the display returns to Run mode.  
Run  
Green  
2
3
If the Power button is momentarily pressed while in Run mode the  
display is turned off while the Thin Client continues to operate.  
This mode can be used for privacy or to conserve power.  
Standby  
Yellow  
Adjusting the Display  
The monitor has four function control buttons designed for comfortable viewing and listening.  
Function Description  
Icon  
Function  
Function Description  
Brightness  
The brightness of the display may be varied.  
The volume of the speakers and headphone may be varied.  
Audio Volume  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Information  
Specifications  
LCD Panel  
ND1750  
ND1950  
Size  
17" SXGA  
19” SXGA  
Display Type  
Resolution  
Active matrix color TFT LCD  
1280 x 1024  
Active matrix color TFT LCD  
1280 x 1024  
Display Dot  
Aspect Ratio  
1280 x (RGB) x 1024  
5:4  
1280 x (RGB) x 1024  
5:4  
Display Area , mm (H x V)  
Displayed Colors  
Brightness  
Contrast Ratio  
Response Time  
Color Temperature  
337.92 mm (H) x 270.34 mm (V)  
Up to16.2M with FRC or Dithering  
300 cd/m2 (typical)  
800:1 (typical)  
5ms (typical)  
6500°K, Factory Calibrated  
376.32 mm (H) x 301.6 mm (V)  
Up to 16.2M with FRC or Dithering  
300 cd/m2 (typical  
800:1 (typical)  
5ms (typical)  
6500°K, Factory Calibrated  
Controls  
Power Switch (Momentary)  
Brightness  
Audio  
Power Mode control with LED indicator  
2 buttons  
2 buttons  
Audio  
Input  
Speaker Output  
Microphone Level, Monophonic  
0.5W + 0.5W  
OSD  
Brightness  
Volume  
Digital  
Digital  
Power Management  
Power Mode  
Power Consumption*  
Power LED Color  
Green  
Run  
60 W maximum  
(DC output, 12V/5A)  
ND1750: 36 W, typical  
ND1950: 40 W, typical  
12 W maximum  
Standby  
Off  
Yellow  
Dark  
10 W typical  
1 W maximum  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Connections  
Power Input (DC input)  
GigaBit Ethernet port  
USB ports  
DC Socket, 12V, 5A (Center Positive)  
RJ45  
4 x USB connectors, Type A Receptacles  
3.5mm Stereo Jack  
Headphone  
Microphone  
3.5mm Mono Jack, Pink  
Headset  
RJ22 (4P4C, Reserved for Future VOIP Software Support)  
Environment  
5°C to 40°C/41°F to 104°F  
20% to 80%  
-20°C to 60° C/-4°F to140° F  
Operating Condition:  
Temperature  
Relative Humidity  
Temperature  
Storage Condition:  
5% to 85%  
Relative Humidity  
Power Supply (AC Input)  
Input Voltage  
Input Current  
Single phase, 100 ~ 240VAC, 50 / 60 Hz  
1.5 A maximum  
Size and Weight  
Dimensions  
ND1750  
367 (W) x 384 (H) x 199 (D) mm  
ND1950  
413 (W) x 418 (H) x 222 (D) mm  
Net Weight  
Gross Weight  
4.5 kg  
7.7 kg  
4.6 kg  
8.0 kg  
Supported Display Resolutions  
If the selected timing is NOT included in table below, the Network Display will use the most suitable available timing.  
Mode  
Resolution  
(Horizontal X Vertical)  
SXGA  
XGA  
1280 X 1024  
1024 X 768  
800 X 600  
640 X 480  
SVGA  
VGA  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
This Network Display has been pre-adjusted using factory standards.  
PROBLEM There is no image on Network Display  
If there’s no image on the Network Display, please perform the following steps:  
1. Verify that the power cord is connected to a proper source of power.  
2. Verify that the power cord is fully connected to the Power Adapter and that the Power Adapter cord is fully  
connected to the DC connector on the rear of the Display. The LED on the Power Adapter should be green.  
3. Verify that the Power Indicator on the Network Display is green.  
4. Turn off the Network Display and then turn it back on again.  
PROBLEM The displayed image is dim.  
If the displayed image on the Display appears too dim:  
1. Press the Brightness Control  
to increase the brightness.  
PROBLEM The Network Display will not connect to your network.  
If the Network Display will not connect to your network, please perform the following steps:  
1. Verify that the Ethernet connector is properly connected to your network and to the Display.  
2. Verify that your network is live and properly configured for use with the network display.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
End User License Agreement (“License”)  
IMPORTANT – READ CAREFULLY.  
THIS LICENSE IS A LEGAL DOCUMENT setting forth the terms under which Planar Systems, Inc. (“Licensor”) and  
its licensors and suppliers (collectively referred to as “Third Party Suppliers”) are willing to license to you  
software which is owned by Licensor and/or its Third Party Suppliers, who are intended third party beneficiaries  
under this License.  
Acceptance. Licensor is willing to license to you the enclosed software, downloaded software, or software  
described in the manual or other document containing this License, whichever is applicable, (“Software”),  
together with any supplied documentation, only if you accept all of the terms contained in this License. Please  
read this Agreement carefully before unpacking, downloading, installing or using the Software or the Device  
(defined below). By downloading or installing the Software, or unpacking or using the Software or Device, you  
agree to be bound by the terms of this License. If you do not agree to these terms, Licensor and its Third Party  
Suppliers are unwilling to license the Software to you, and you should not and may not download or install the  
Software or unpack or use the Software or the Device. In such case, you should promptly contact Licensor for  
information on return of the unused product and all accompanying materials for a refund of your money. ANY  
USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSISTUTE YOUR  
ACCEPTANCE OF THIS LICENSE (OR RATIFICATION OF ANY PREVIOUS CONSENT).  
Grant. Licensor grants to you a non-exclusive right, during the term of this License, to install and/or use the  
Software, in object code only, solely in conjunction with your Planar-manufactured hardware (“Device”). You  
have the right to use this Software by loading it onto a computer containing the capability of transferring the  
Software (in whole or in part) to the Device. You may use the Software in this fashion as many times as  
necessary, so long as such use is always in conjunction with the Device.  
Copyright. The Software and all related documentation are protected under the laws and treaties of copyright  
and intellectual property. All title and copyrights in and to the Software (including but not limited to any  
images, photographs, animations, video, audio, music, text and “applets” incorporated into the Software) and  
any copies of the Software are owned and retained by Licensor and/or its Third Party Suppliers. You may copy  
and use the Software and related documentation only as expressly permitted in this License. You must  
reproduce and maintain all proprietary marks, legends, and copyright notices that appear in or on the Software  
and related materials, or any portion thereof, on any copies of the Software or related materials that you make  
or use. Third Party Suppliers named in such copyright notices shall each have the right to enforce provisions of  
this License or use. Third Party Suppliers named in such copyright notices shall each have the right to enforce  
provisions of this License.  
Patents. The Software and/or Device are protected by international treaties and various patents, including the  
following U.S. patents: 6,836,885 and 5,918,039.  
Restrictions. You may not use, copy, modify, translate or transfer the Software, or any modification thereof, in  
whole or in part, except as expressly provided for in this License. You may not sell, rent, lend or lease the  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software. You may not decompile, reverse engineer or otherwise decode or alter the Software, or attempt to do  
any of the same, except and only to the extent that applicable law notwithstanding this limitation expressly  
permits such activity.  
Software Transfer. You may permanently transfer to another party ownership of the Device and equipment,  
including all of your rights under this License to use the Software, provided you retain no copies, you transfer  
the entire product (including the Device and Software, all component parts, the media and printed materials,  
any upgrades, these license terms, and, if applicable, the Certificate(s) of Authority), and the recipient accepts  
and agrees to the terms and conditions of this License. You may not otherwise sublicense, assign or transfer the  
Software or ownership of the Device and equipment. If the Software is an upgrade, any transfer must also  
include all previous versions of the Software.  
Termination. This License will terminate automatically if you fail to comply with any of its terms or conditions,  
including any attempt to modify the Software. Upon termination for any reason, you agree to promptly destroy  
all copies of the Software and related material or return all such copies to Licensor.  
Disclaimer of Warranty. The Software is provided “AS IS” with all faults and with no warranties of any kind,  
whether express, implied or statutory. LICENSOR SPECIFICALLY DISCLAIMS ALL WARRANTIES,  
REPRESENTATIONS, OR CONDITIONS, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR  
CONDITION OF MERCHANTABILITY, NONINFRINGEMENT, AND CORRESPONDENCE TO DESCRIPTION OR FITNESS  
FOR A PARTICULAR PURPOSE. LICENSOR DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE  
SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION WILL BE UNINTERRUPTED OR ERROR  
FREE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE  
EXCLUSION MAY NOT APPLY TO YOU.  
LIMITATION OF LIABILITY. IN NO EVENT SHALL LICENSOR OR ANY THIRD PARTY SUPPLIER BE LIABLE FOR ANY  
DIRECT, CONSEQUENTIAL, INCIDENTAL, INDIRECT, OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION  
COST OF COVER, LOST PROFITS, OR LOSSES RESULTING FROM BUSINESS INTERRUPTION OR LOSS OF DATA,  
REGARDLESS OF THE FORM OF ACTION OR LEGAL THEORY UNDER WHICH THE LIABILITY MAY BE ASSERTED,  
EVEN IF ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT  
ALLOW THE LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE  
LIMITATION MAY NOT APPLY TO YOU.  
REMEDIES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER  
(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL DIRECT OR GENERAL  
DAMAGES), THE ENTIRE LIABILITY OF LICENSOR AND ANY THIRD PARTY SUPPLIERS UNDER ANY PROVISION  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peerless Industries Projector Accessories PRG UNV User Manual
Pentax Camcorder ZX L User Manual
Philips Indoor Furnishings 3000K User Manual
Philips Stereo System SDV7700K User Manual
Pioneer DVR DVR LX70 User Manual
Polycom DVD Player DVD 729 User Manual
Poulan Lawn Mower PRGT2046A User Manual
ProForm Home Gym PFRX35390 User Manual
ProForm Treadmill 831291671 User Manual
PVI Industries Water Heater 1000N600A TPO User Manual