Planar Car Video System PT2245PW User Manual

PT2245PW  
Touch Screen Monitor  
USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Usage Notice  
Precautions ................................................................................................................. 1  
Introduction  
About PT2245PW Series ............................................................................................. 2  
Touch Screen for PT2245PW ...................................................................................... 2  
Package Overview ...................................................................................................... 3  
Installation  
Product Overview ........................................................................................................ 4  
Front View............................................................................................................... 4  
Bottom View (Without Stand) .................................................................................. 4  
VESA Mount for Your Monitor ...................................................................................... 5  
Start Your Installation .................................................................................................. 6  
Connecting the Display (Figure 8.1)............................................................................. 7  
(Figure 8.1) ............................................................................................................. 8  
User Controls  
Side Panel Controls..................................................................................................... 9  
How to Use the OSD Menus .......................................................................................10  
On-Screen Display Menus ..........................................................................................11  
Appendix  
Troubleshooting..........................................................................................................12  
Warning Signal ...........................................................................................................13  
No Signal................................................................................................................13  
Going to Sleep........................................................................................................13  
Out of Range..........................................................................................................13  
Product Dimensions ...................................................................................................14  
Compatibility Modes ...................................................................................................16  
Touch Screen Driver Installation .................................................................................17  
PT2245PW Calibration Instruction ..........................................................................18  
PT2245PW Install Instruction..................................................................................20  
Technical Support.......................................................................................................21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usage Notice  
!
!
Warning - To prevent the risk of fire or shock hazards, do not expose  
this product to rain or moisture.  
Warning - Please do not open or disassemble the product as this may  
cause electric shock.  
Precautions  
Follow all warnings, precautions and maintenance as recommended in this user’s manual to  
maximize the life of your unit.  
Do:  
• Turn off the product before cleaning.  
Touch screen surface may be cleaned using a soft clean cloth moistened with mild window  
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.  
• Use a soft cloth moistened with mild detergent to clean the display housing.  
• Use only high quality and safety approved DC adapter.  
• Disconnect the power plug from outlet if the product is not going to be used for an  
extended period of time.  
Don’t:  
• Do not touch the Display screen surface with sharp or hard objects.  
• Do not use abrasive cleaners, waxes or solvents for your cleaning.  
• Do not operate the product under the following conditions:  
- Extremely hot, cold or humid environment.  
- Areas susceptible to excessive dust and dirt.  
- Near any appliance generating a strong magnetic field.  
- In direct sunlight.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
About PT2245PW Series  
The PT2245PW Series is a 21.5" flat panel screen with an active matrix, thin-film  
transistor (TFT) edge-lit LED LCD.  
This unit is to be used as commercial and light industrial equipment only.  
Features include:  
• Direct Analog signal input  
• Direct Digital signal input  
• Active matrix TFT LCD technology  
• 1920 x 1080 resolution  
• 21.5" viewable display area - 16:9 aspect ratio  
• 31.47 ~ 82.3 KHz horizontal scan  
• 56 ~ 75 Hz high refresh rate  
• 0.24795mm x 0.24795mm pixel pitch  
• Auto adjustment function  
• Multilingual OSD user control  
• 100 mm VESA mount  
• Removable base for flexible mounting solutions.  
Touch screen with USB controller  
Touch Screen for PT2245PW  
• Number of Touch Points: 10  
• Projected Capacitive touch screen for finger input only  
• Surface: Glare treatment  
• Interface: USB controller  
• Transmittance: 90%±5%  
• HID: Windows® 7/8  
• Driver: VISTA, XP, 2000, CE, XP Embedded,  
®
Linux kernel 2.6.x (32 bit & 64 bit), Apple Mac OS  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Overview  
LCD Display  
Power Cord  
DVI-D Cable  
Landing Strip  
VGA Signal Cable  
DC Power Supply  
Cable Cover Screw  
USB Cable ( A to B)  
xxxxxxxxx /  
xxxxxxxxx  
xxxxxxxxx  
USER’S GUIDE  
www  
.planartouch.com  
User’s Guide  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Product Overview  
• Front View  
• Bottom View (Without Stand)  
DC IN  
USB  
DVI  
VGA  
RJ-Type  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
VESA Mount for Your Monitor  
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface  
standard which defines a physical mounting interface for flat panel monitors, and  
corresponding with the standards of flat panel monitor mounting devices, such as wall and  
table arms. The VESA mounting interface is located on the back of your monitor.  
To mount the monitor on a UL certified swing arm or other mounting fixture, follow the  
instructions included with the mounting fixture to be used.  
100.0 mm  
Slots(X6)  
VESA  
Mounting  
Interface  
!
Warning!  
Please select the proper screws!  
The distance between the back cover surface and the bottom of the screw hole  
is 8 mm. Please use four M4 screws diameter with proper length to mount your  
monitor.  
Please note: the mounting stand must be able to support at least 17.6 lbs (8Kg).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start Your Installation  
Please follow these instructions so that you can hook up the cables to associated connectors.  
1. Lay the display flat on an even surface.  
2. Move the stand into position as seen in the step 1 diagram.  
3. Remove the cable cover as seen in the step 2 diagram.  
4. Connect the cables to the appropriate connectors as seen in the step 3 diagram.  
5. Re-attach the cable cover. Take the screw (CBM M3x6) out of the accessory box, and  
insert the screw into the cable cover and monitor as seen in the step 4 diagram.  
Stt  
e
e
p
p
21  
Step 2  
Step 3  
DC IN  
USB  
VGA  
DVI  
Stt  
e
e
p
p
24  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Display (Figure 8.1)  
To setup this display, please refer to the following figure and procedures.  
1. Be sure all equipment is turned off.  
2. Connect the DC plug to the power connector on the monitor and the other end into an  
electrical outlet (8.1).  
3. Connect the D-SUB or DVI cable from the display’s D-SUB or DVI input connector to the  
D-SUB or DVI connector of your host computer and tighten the screws (8.1).  
4. Connect the USB cable from the USB port of your display to the USB port (8.1) of your  
computer.  
5. Configure the touch screen. Refer to the “Touch Screen Driver Installation” section on  
page 17.  
6. Once the touch screen is configured, the monitor is ready for use.  
! Notice!  
To ensure the display works well with your computer, please configure the display  
mode of your graphics card to make it less than or equal to 1920 x 1080 resolution  
and make sure the timing of the display mode is compatible with the LCD display.  
We have listed the compatible “Video Modes” of your LCD display in the appendix  
(on page 16) for your reference.  
Applicable external power supply: Lite-On/PA-1051-0  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
(Figure 8.1)  
(Optional)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Controls  
Side Panel Controls  
Icon  
Key Name  
Menu  
Up  
Down  
Select  
Power  
OSD  
Key  
Menu off status  
Menu on status  
Menu appear  
Brightness  
Menu disappear / return to main item  
Main item select up / Adjust up  
Contrast  
Main item select down / Adjust down  
Select sub-item function  
Power On / Off  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Use the OSD Menus  
Icon  
Key Name  
Menu  
Up  
Down  
Select  
Power  
1. Press the “Menu” button to pop up the “on-screen menu” and press “Up” or “Down”  
button to select among the five functions in the main menu.  
2. Choose the adjustment items by pressing the “Select” button.  
3. Adjust the value of the adjustment items by pressing the “Up” or “Down” button.  
4. With the OSD menu on the screen, press the “Menu” button to return to the main menu  
or to exit OSD.  
5. The OSD menu will automatically close, if you have left it idle for a pre-set time.  
6. To Lock the OSD / Power menu buttons, please follow the instructions below.  
(Please note: the monitor has to be turned ON with a valid signal pre-set)  
(a.) Press the “Menu” key; the OSD menu will open.  
(b.) Press and hold the “Menu” key again with the OSD menu on the screen; the OSD  
menu will disappear. Then press the “Power” key 1 time while the menu key is still  
being pressed. The “Lock/Unlock” menu will appear for 3 seconds.  
(c.) Use the “Select” key to select OSD or Power setting then set at “Lock” by pushing the  
“UP” or “Down” button.  
(d.) When the “UP” or “Down” button is released, the previous setting will be saved and  
exit the “Lock/Unlock” menu automatically.  
7. To Unlock the OSD / Power menu buttons, please follow the instructions below.  
(Please note: the monitor has to be turned ON with a valid signal pre-set)  
(a.) Press and hold the “Menu” key then press the “Power” key simultaneously; the  
“Lock/Unlock” menu will appear for 3 seconds.  
(b.) Use the “Select” key to select OSD or Power setting then set at “Unlock” by pushing  
the “UP” or “Down” button.  
(c.) When the “Up” or “Down” button is released, the previous setting will be saved, and  
the “Lock/Unlock” menu will close automatically.  
Please note:  
a. When the OSD Lock function is selected, this indicates that all the buttons except  
the “power” button are now disabled.  
b. When the Power Lock function is selected, the “Power” key is disabled. The user  
cannot turn off the monitor with the “Power” key.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menus  
Main OSD Menu:  
ITEM  
CONTENT  
Contrast  
The monitor luminance level control.  
The monitor backlight level control.  
Brightness  
Auto Adjust  
Left/Right  
Fine-tune the image to full screen automatically.  
Moving screen image horizontal position to left or right.  
Moving screen image vertical position to up or down.  
The screen image horizontal dot clock adjustment.  
The screen image pixel phase adjustment.  
Up/Down  
Horizontal size  
Fine  
OSD Left/Right  
OSD Up/Down  
OSD Time out  
Moving OSD menu horizontal position to left or right.  
Moving OSD menu vertical position to up or down.  
OSD auto-disappear time selection.  
OSD menu language selection. ( English, French, Japanese, Deutsch,  
OSD Language  
Spanish, Italian, Traditional Chinese and Simplified Chinese)  
Factory Reset  
RGB  
Factory default value restored.  
Color temperature selection. (9300K, 6500K, 5500K, 7500K, User)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
If you are experiencing trouble with the display, refer to the following. If the problem persists,  
please contact your local dealer or our service center.  
Problem: No image appears on screen.  
► Check that all the I/O and power connectors are correctly and well connected  
as described in the “Installation” section.  
► Make sure the pins of the connectors are not crooked or broken.  
Problem: Partial Image or incorrectly displayed image.  
► Check to see if the resolution of your computer is higher than that of the display.  
► Reconfigure the resolution of your computer to make it less than or equal to  
1920 x 1080.  
Problem: Image has vertical flickering line bars.  
► Use “Horizontal size” to make an adjustment.  
► Check and reconfigure the display mode of the vertical refresh rate of your  
graphic card to make it compatible with the display.  
Problem: Image is unstable and flickering  
► Use “Fine” to make an adjustment.  
Problem: Image is scrolling  
► Check and make sure the VGA signal cable (or adapter) is securely connected.  
► Check and reconfigure the display mode of the vertical refresh rate of your  
graphics card to make it compatible with the display.  
Problem: Vague image (characters and graphics)  
► Use “Horizontal size” to make an adjustment. If this problem still exists, use “Fine”  
to make an adjustment.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning Signal  
If you see warning messages on your screen, this means that the display cannot receive a  
clean signal from the computer graphics card.  
Below are the three kinds of Warning Signal. Please check the cable connections or contact  
your local dealer or our service center for more information.  
No Signal  
This message means that the display has been powered on but it cannot receive any signal  
from the computer graphics card. Check all the power switches, power cables, and VGA/DVI  
signal cable.  
Going to Sleep  
The display is under the power saving mode. In addition, the display will enter power saving  
mode when experiencing a sudden signal disconnecting problem.  
The monitor can be activated by pressing any keyboard, triggering the mouse or touching  
the screen.  
Out of Range  
This message means that the signal of the computer graphic card is not compatible with  
the display. When the signal is not included in the “Video Modes” list we have listed in the  
Appendices of this manual, the monitor will display this message.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Dimensions  
517.4 mm  
► Front View  
46.0 mm  
► Side View  
249.6 mm  
► Top View  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rotate  
313.3 mm  
► Front View  
46.0 mm  
► Side View  
249.6 mm  
► Top View  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatibility Modes  
Mode  
Resolution  
720X400  
H-Frequency(khz)  
V-Frequency(hz)  
IBM VGA  
31.47  
31.47  
35.00  
37.86  
37.50  
35.16  
37.88  
48.08  
46.88  
49.72  
48.36  
56.48  
60.02  
64.00  
80.00  
67.50  
60.00  
56.00  
70.60  
65.20  
82.30  
47.776  
70  
60  
66  
72  
75  
56  
60  
72  
75  
75  
60  
70  
75  
60  
75  
75  
60  
60  
75  
60  
75  
60  
IBM VGA  
640X480  
Apple MacII  
VESA VGA  
VESA VGA  
VESA SVGA  
VESA SVGA  
VESA SVGA  
VESA SVGA  
Apple Mac  
VESA XGA  
VESA XGA  
VESA XGA  
VESA SXGA  
VESA SXGA  
VESA SXGA  
VESA SXGA  
WXGA+  
640X480  
640X480  
640X480  
800X600  
800X600  
800X600  
800X600  
832X624  
1024X768  
1024X768  
1024X768  
1280X1024  
1280X1024  
1152X864  
1280X960  
1440X900  
1440X900  
1680X1050  
1680X1050 (VGA only)  
1280X768  
WXGA+  
WSXGA+  
WSXGA+  
VESA WXGA  
WSXGA+  
1920X1080  
67.50  
60  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Touch Screen Driver Installation  
port for these operating systems: Windows® 7/8, VISTA, XP, 2000, CE,  
XP Embedded, Linux kernel 2.6.x (32 bit & 64 bit), Apple® Mac OS. (Windows 7/8 Multi  
touch without driver)  
Please Note:  
1. The PT2245PW is Microsoft® Windows® HID (Human Interface Device)  
compatible if you use the USB touch screen interface. No additional software driver is  
required for general operation of the touch screen. A calibration tool can be installed for  
improved touch position accuracy. See “Optional Calibration Tool Install” section for more  
information.  
2. For PT2245PW, the system requires 15 seconds for Windows 7/8 to process the touch  
program while turning power on/off or plugging/unplugging USB cable.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PT2245PW Calibration Instruction:  
Calibrating the touch screen in Windows 7/8:  
1. Tap the Start button, Control Panel and then Hardware and Sound.  
2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.  
3. On the Display tab, under Display options, tap Calibrate and then Yes to allow the  
program to make changes.  
4. Follow the on-screen instructions to calibrate the touch screen.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PT2245PW Install Instruction:  
If you are using a PC running, Windows® 7/8, VISTA, XP, 2000, follow the  
instructions below:  
1. Power on the PC.  
2. Make sure that the USB cable is connected to the computer.  
4. Follow the step-by-step instructions as shown on the pop-up windows.  
If you are using a PC running driver Linux kernel 2.6.x (32 bit & 64 bit),  
follow the instructions below:  
1. Power on the PC.  
2. Make sure that the USB cable is connected to the computer.  
4. Follow the step-by-step instructions as shown on the pop-up windows.  
If you are using a PC running Windows® XP Embedded, follow the  
instructions below:  
Express:  
1. Power on the computer.  
2. Make sure that the USB cable is connected to the computer.  
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by  
using the EWF Manager command.  
the step-by-step instructions as shown on the pop-up windows.  
Custom:  
1. Power on the computer.  
2. Make sure that the USB cable is connected to the computer.  
If you are using a PC running Windows® CE, follow the instructions  
below:  
1. Power on the computer.  
2. Make sure that the USB cable is connected to the computer.  
3. Using Platform Builder, build an image file by following the step-by-step instructions  
If you are using a PC running Linux or Apple® Mac OS, follow the  
instructions below:  
1. Power on the computer.  
2. Make sure that the USB cable is connected to the computer.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support  
Cables and Accessories  
To nd cables and accessories for your Planar monitor, touch screen or other Planar products  
visit our online store at www.PlanarOnline.com.  
Technical Support  
Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers,  
warranty information and access to Planar’s Technical Library for online trouble shooting.  
To speak with Planar Customer Support please have you model and serial number available  
and dial:  
Planar Support  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.  
Hours: 24 hours a day, 7 days a week.  
Toll or long distance charges may apply.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planar Systems, Inc.  
Customer Service  
1195 NW Compton Drive  
Beaverton, OR 97006-1992  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the United States.  
Hours: 24 hours a day, 7 days a week  
© 2013 Planar Systems, Inc. 10/13 Planar is a registered trademark of Planar Systems, Inc.  
Other brands and names are the property of their respective owners.  
Technical information in this document is subject to change without notice.  
020-1224-00B  
820400300102  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelonis Fan FS40 G5 User Manual
Philips Baby Accessories SCF633 42 User Manual
Philips Battery Charger LR20PS12C 10 User Manual
Philips Computer Monitor 105S11 User Manual
Philips CRT Television TR2517C User Manual
Philips Portable Speaker 50PF9966 37 User Manual
Philips TV Cables SWA2500 User Manual
Philips TV VCR Combo 14PV125 39 User Manual
Polaroid Digital Photo Frame Digital Picture Frame User Manual
Presonus Audio electronic Stereo Equalizer Smart Compressor User Manual