PT1500MX / PT1550MX /
PT1501MX / PT1575S / PT1585P
Touch Screen LCD Monitors
USER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Table of Contents
Usage Notice ...........................................................................3
Precautions .........................................................................................3
Introduction .............................................................................4
About PT1500MX / PT1550MX / PT1501MX / PT1575S / PT1585P..4
Touch Screen for PT1500MX / PT1550MX..................................4
Touch Screen for PT1501MX.......................................................4
Touch Screen for PT1575S..........................................................4
Touch Screen for PT1585P..........................................................6
Package Overview ..............................................................................7
Installation ...............................................................................8
Product Overview................................................................................8
Front View......................................................................................8
PT1500MX / PT1550MX / PT1501MX / PT1575S Bottom View....8
PT1585P Bottom View...................................................................8
Start Your Installation ..........................................................................9
Connecting the Display (Figure 12.1)................................................11
Kensington Security Slot...................................................................13
VESA Mount your monitor.................................................................14
Remove the Deskstand..............................................................15
User Controls ........................................................................ 16
Side Panel Controls ..........................................................................16
How to Use the OSD Menus.............................................................17
On-Screen Display Menus .............................................................19
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Appendix................................................................................ 20
Troubleshooting.................................................................................20
Warning Signal..................................................................................21
No Signal ....................................................................................21
Going to Sleep.............................................................................21
Out of Range ...............................................................................21
Product Dimensions..........................................................................22
Compatibility Modes..........................................................................24
Touch Screen Driver Installation .......................................................25
Product Registration and Technical Support.....................................31
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as
this may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended
in this user’s manual to maximize the life of your unit.
Do:
‰ Turn off the product before cleaning.
‰ Touch screen surface may be cleaned using a soft clean cloth
moistened with mild window glass commercial cleaners or 50/50
mixture of water and isopropyl alcohol.
‰ Use a soft cloth moistened with mild detergent to clean the display
housing.
‰ Use only high quality and safety approved AC/DC adapter.
‰ Disconnect the power plug from AC outlet if the product is not going
to be used for an extended period of time.
Don’t:
‰ Do not touch the LCD Display screen surface with sharp or hard
objects.
‰ Do not use abrasive cleaners, waxes or solvents for your cleaning.
‰ Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Introduction
About PT1500MX / PT1550MX / PT1501MX /
PT1575S / PT1585P
The PT1500MX / PT1550MX / PT1501MX / PT1575S / PT1585P is a
15” flat panel screen with an active matrix, thin-film transistor (TFT)
liquid crystal display (LCD).
Features include:
‰ Direct Analog signal input
‰ Active matrix TFT LCD technology
‰ 1024x768 XGA resolution
‰ 15” viewable display area
‰ 31.47 ~ 60.02 kHz horizontal scan
‰ 56 ~ 75 Hz high refresh rate
‰ 0.297mm x 0.297mm pixel pitch
‰ Auto adjustment function
‰ Multilingual OSD user controls
‰ VESA DPMS power saving
‰ Kensington security slot
‰ 75 mm VESA mount
‰ Removable base for flexible mounting solutions.
‰ PT1500MX / PT1550MX – 5-wire resistive touch screen with dual RS-232
Serial/USB controller
‰ PT1501MX – Capacitive touch screen with dual RS-232 Serial/USB
controller
‰ PT1575S – SAW touch screen with dual RS-232 Serial/USB controller
‰ PT1585P – Projected capacitive touch screen with USB controller
‰ Built-in speakers-1W X 2
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Touch Screen for PT1500MX / PT1550MX
‰ 5-wire resistive touch screen for finger and stylus input
‰ Surface: Anti-glare treatment
‰ Interface: Dual RS-232 Serial/USB controller
‰ Durability: 35 million touches at a single point
‰ Hardness of surface: 3H Typical
‰ Operating force: 40g~200g when using a silicon rubber tipped pen with a
1 mm diameter minimum and a hardness of 60 degree.
‰ Transmittance: 82%±5%
‰ Driver: Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded,
Linux, Apple® Mac OS
Touch Screen for PT1501MX
‰ Capacitive touch screen for finger input
‰ Surface: Anti-glare treatment
‰ Interface: Dual RS-232 Serial/USB controller
‰ Durability: 225 million touches at a single point
‰ Hardness of surface: Mohs’ Hardness rating of 7
‰ Transmittance: 85%±5%
‰ Driver: Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded,
Linux, Apple® Mac OS
Touch Screen for PT1575S
‰ Surface Acoustic Wave (SAW) touch screen for finger and stylus input
‰ Surface: Anti-glare treatment
‰ Interface: Dual RS-232 Serial/USB controller
‰ Durability: 50 million touches at a single point
‰ Hardness of surface: Mohs’ Hardness rating of 7
‰ Operating force: Typically less than 85 g
‰ Transmittance: 92%±5%
‰ Driver: Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded,
Linux, Apple® Mac OS
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Touch Screen for PT1585P
‰ Project capacitive touch screen for finger input only
‰ Surface: Glare treatment
‰ Interface: USB controller
‰ Transmittance: 90%±5%
‰ Driver: Windows® 7, VISTA 64/32 bits, XP, 2000, CE, XP Embedded
Express, Linux, Apple® Mac OS
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Package Overview
LCD Display
Power Cord
VGA Signal Cable
RS-232 Cable
(PT1500MX / PT1550MX
PT1501MX / PT1575S only)
USB Cable (A to A)
(PT1550MX)
Audio-in Cable
User’s Manual
USB Cable (A to B)
Touch Screen Driver
Installation CD-ROM
User’s Guide
Landing Strip
Screw
DC Power Supply
(sold separately)
Cable Cover
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Installation
Product Overview
►
Front View
PT1500MX/PT1550MX
PT1501MX/PT1575S
PT1585P
►
PT1500MX/PT1550MX/PT1501MX/PT1575S
Bottom View (Without Stand)
►
PT1585P Bottom View (Without Stand)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Start Your Installation
1. Lay the LCD flat on an even surface.
2. Remove the stand back cover by pulling in the direction of the arrow as seen
in step 2 diagram.
3. Move the stand into position as seen in step 3 diagram.
4. Connect the cables to the appropriate connectors as seen in Step 4 diagram.
Use step 4-1 diagram if using the RS-232 serial connector. Use step 4-2
diagram if using the USB connector.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
5. Take the optional cable cover and screw from the accessory box. Position all
cables under the cover lip as seen in the step 5 diagram.
6. Using a Philips Head screwdriver, insert the screw (CBM M3x6) into the cable
cover and monitor as seen in the step 6 diagram.
7. Re-attach the stand back cover to the LCD stand by pressing firmly until the
tabs snap into place as seen in the step 7 diagram. You may also keep the
cables in order by using the cable organizer.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Connecting the Display (Figure 12.1)
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is turned off.
2. Connect the AC power cord to the power connector on the monitor and
the other end into an electrical outlet (12.1).
3. Connect the D-SUB cable from the display’s VGA input connector to the
D-SUB connector of your host computer and tighten the screws (12.1).
4. Connect the Audio-In cable from the audio input port of your display to
the Audio-out port of your computer (12.1).
5. Connect the RS-232 or USB cable from the RS-232 or USB port of your
display to the RS-232 port or USB port (12.1) of your computer.
6. Configure the touch screen. Refer to the “Touch Screen Driver
Installation” section on page 25.
7. Once the touch screen is configured, the monitor is ready for use.
Instructions to attach the magnetic stripe reader to the computer
(PT1550MX model)
1. Attach the USB Type A to A cable to the magnetic stripe reader.
2. Route the cable through the cable management opening in the desk
stand with the other monitor cables.
3. Plug the cable into the computer.
4. No driver is necessary.
To ensure the LCD display works well with your computer, please
configure the display mode of your graphics card to make it less than or
equal to 1024 x768 resolution and make sure the timing of the display
mode is compatible with the LCD display.
We have listed the compatible “Video Modes” of your LCD display in the
appendix for your reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
(Figure 12.1)
►
PT1500MX/PT1550MX/PT1501MX/PT1575S
►
PT1585P
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Kensington Security Slot
The monitor can be secured to your desk or any other fixed object with
Kensington lock security products. The Kensington lock is not included.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
VESA Mount your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting
Interface standard which defines a physical mounting interface for flat panel
monitors, and corresponding with the standards of flat panel monitor mounting
devices, such as wall and table arms. The VESA mounting interface is located
on the back of your monitor.
To mount the monitor on a UL certified swing arm or other mounting fixture,
follow the instructions included with the mounting fixture to be used.
Warning!
Please select the proper screws!
The distance between the back cover surface and the bottom of the screw
hole is 8mm. Please use four M4 screws diameter with proper length to
mount your monitor.
Please note: the mounting stand must be able to support at least 11 lbs
( 5Kg).
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Remove the Deskstand
1.
Remove stand
back cover.
2.
Remove hinge
cover
3.
Remove 4 screws
and then remove
hinge.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
User Controls
Side Panel Controls
OSD
Menu off status
Key
Menu on status
Menu disappear / return to main item
Main item select up / Adjust up
Menu appear
Brightness
Mute
S
T
Main item select down / Adjust down
Enter / Select sub-item function
Power On / Off
Download from Www.Somanuals.com. All Manuals Search And Download.
17
How to Use the OSD Menus
1. Press the “MENU” button to pop up the “on-screen menu” and press “Up”
or “Down” button to select among the six functions in the main menu.
2. Choose the adjustment items by pressing the “Enter ” button.
3. Adjust the value of the adjustment items by pressing the “Up” or “Down”
button.
4. With the OSD menu on screen, press “ Menu” button to return main menu
or exit OSD.
5. The OSD menu will automatically close, if you have left it idle for a
pre-set time.
6. To Lock the OSD / Power menu buttons, please follow the instructions
below.
(Please note: the monitor has to be turned ON with a valid signal pre-set)
(a.) Press “Menu” key , the OSD menu will pops upon display.
(b.) Press and hold the “Menu” key again with the OSD menu on the
screen, the OSD menu will disappear. Then press the “Power” key 1
time while the menu key is still being pressed. The “Lock/Unlock”
menu will appear for 3 seconds.
(c.) Use the “Enter” key to select OSD or Power setting then set at
“Lock” by pushing the “UP” or “Down” button.
(d.) When the “UP” or “Down” button is released, the previous setting
will be saved and exit the “Lock/Unlock” menu automatically.
7. To Unlock the OSD / Power menu buttons, please follow the instructions
below.
(Please note: the monitor has to be turned ON with a valid signal pre-set)
(a.) Press and hold the “Menu” key then press the “Power” key
simultaneously, the “Lock/Unlock” menu will appear for 3 seconds.
(b.) Use the “Enter” key to select OSD or Power setting then set at
“Unlock” by pushing the “UP” or “Down” button.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
(c.) When the “UP” or “Down” button is released, the previous setting
will be saved and exit the “Lock/Unlock” menu automatically.
Please note:
a. When the OSD Lock function is selected, this indicates that all the
buttons except “power” button are now disabled.
b. When the Power Lock function is selected, this indicates that the
power key is disabled; user can not to turn off the monitor by
“Power” key.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
On-Screen Display Menus
Main OSD Menu:
ITEM
CONTENT
Contrast
The monitor luminance level control.
The monitor backlight level control.
Brightness
Auto Adjust
Fine-tune the image to full screen automatically.
Left/Right
Moving screen image horizontal position to left or right.
Moving screen image vertical position to up or down.
The screen image horizontal dot clock adjustment.
Up/Down
Horizontal size
Fine
The screen image pixel phase adjustment.
Moving OSD menu horizontal position to left or right.
Moving OSD menu vertical position to up or down.
OSD auto-disappear time selection.
OSD Left/Right
OSD Up/Down
OSD Time out
OSD menu language selection. ( English, French,
Japanese, Deutsch, Spanish, Italian, Traditional Chinese
and Simplified Chinese)
OSD Language
Factory Reset
RGB
Factory default value restored.
Color temperature selection. (9300K, 6500K, 5500K,
7500K, User)
Volume
Mute
Audio volume adjustment.
Audio On/Off control.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the following. If
the problem persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
ꢀCheck that all the I/O and power connectors are correctly and well
connected as described in the “Installation” section.
ꢀMake sure the pins of the connectors are not crooked or broken.
Problem: Partial Image or incorrectly displayed image.
ꢀCheck to see if the resolution of your computer is higher than that of the
LCD display.
ꢀReconfigure the resolution of your computer to make it less than or equal
to 1024 x 768.
Problem: Image has vertical flickering line bars.
ꢀUse "Fine" to make an adjustment.
ꢀCheck and reconfigure the display mode of the vertical refresh rate of your
graphic card to make it compatible with the LCD display.
Problem: Image is unstable and flickering
ꢀUse "Horizontal size" to make an adjustment.
Problem: Image is scrolling
ꢀCheck and make sure the VGA signal cable (or adapter) is securely
connected.
ꢀCheck and reconfigure the display mode of the vertical refresh rate of your
graphics card to make it compatible with the LCD display.
Problem: Vague image (characters and graphics)
ꢀUse "Fine" to make an adjustment. If this problem still exists, use
"Horizontal size" to make an adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Warning Signal
If you see warning messages on your LCD screen, this means that the
LCD display cannot receive a clean signal from the computer graphics
card.
Below are the three kinds of Warning Signal. Please check the cable
connections or contact your local dealer or our service center for more
information.
No Signal
This message means that the LCD display has been powered on but it
cannot receive any signal from the computer graphics card. Check all the
power switches, power cables, and VGA signal cable.
Going to Sleep
The LCD display is under the power saving mode. In addition, the LCD
display will enter power saving mode when experiencing a sudden signal
disconnecting problem.
The monitor can be activated by pressing any keyboard, triggering the
mouse or touching the screen.
Out of Range
This message means that the signal of the computer graphic card is not
compatible with the LCD display. When the signal is not included in the
"Video Modes" list we have listed in the Appendices of this manual, the
LCD monitor will display this message.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Product Dimensions
PT1500MX/PT1550MX/PT1501MX/PT1575S
Download from Www.Somanuals.com. All Manuals Search And Download.
23
PT1585P
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Compatibility Modes
H-Frequency
(KHz)
V-Frequency
(Hz)
Mode
Resolution
VGA
VGA
720x400
640x480
640x480
640X480
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
640x480
832x624
31.47
31.47
37.86
37.50
35.16
37.88
46.88
48.08
48.36
56.48
60.02
35.00
49.72
70
60
72
75
56
60
75
72
60
70
75
66
75
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
Apple Mac II
Apple Mac
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Touch Screen Driver Installation
The PT1500MX/PT1550MX/PT1501MX/PT1575S is available with both RS232
and USB connections. The touch driver is located on the enclosed CD-ROM for
these operating systems: Windows® 7, VISTA 64/32 bits, XP, 2000, ME, 98,
NT4.0, CE, XP Embedded, Linux, Apple® Mac OS.
The PT1585P is available with USB connection. The touch driver is located on
the enclosed. CD-ROM for these operating systems: Windows® 7, VISTA
64/32 bits, XP, 2000, CE, XP Embedded, Linux, Apple® Mac OS.
Please Note:
®
PT1500MX/PT1550MX/PT1501MX/PT1575S
1. The
is Microsoft
Windows® HID (Human Interface Device) compatible if you use
the USB touch screen interface. No additional software driver is
required for general operation of the touch screen.
PT1585P, the systems
Windows 7 to
requires 15 seconds for
2. For
Install/uninstall the touch drivers while turning power on/off or
plugging/unplugging USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
PT1500MX/PT1550MX/PT1501MX/PT1575S Optional Calibration
Tool Install:
If you would like to use the Optional Calibration Tool, follow the instructions
below. Please note: the calibration tool supports Windows® 7, VISTA, XP, XP
Embedded, 2000, 98 and ME operating systems via USB only.
1. Open the CD-ROM.
2. Select the monitor size and then model name.
3. Click on the “Load Utility” button that appears to the right of the model name.
4. The HID calibration tool will automatically open. From here the user can
choose to do the following:
a. 4 Points Calibration
b. 9 Points Linearization
c. 25 Points Linearization
d. Clear
e. Draw Test
f. Advanced. In the Advanced settings area the user may do the following:
i.
Adjust the Double Click Area.
ii. Enable auto right click and adjust the auto right click time.
iii. Choose to be either in the HID Mouse Mode or HID Digitizer Mode
(Windows® Vista and Windows 7).
iv. Simply click the “Apply” button once the settings are finalized.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
PT1585P Calibration Instructions:
Calibrating the touch screen in Windows 7:
1. Tap the Start button, Control Panel and then Hardware and Sound.
2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch
input.
3. On the Display tab, under Display options, tap Calibrate and then Yes to
allow the program to make changes.
4. Follow the on-screen instructions to calibrate the touch screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
29
PT1500MX/PT1550MX/PT1501MX/PT1575S/ PT1585P
Install Instructions:
If you are using a PC running Windows® 7, VISTA, XP, 2000, ME, 98,
NT4.0, follow the instructions below:
1. Power on the PC.
2. Be sure the USB or the RS-232 Serial cable is connected from the PC to the
LCD display.
3. Open the CD-ROM.
4. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows® XP Embedded, follow the
instructions below:
Express:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable
the EWF by using the EWF Manager command.
4. Once the EWF is disabled click on the XP driver on the CD-ROM and follow
the step-by-step instructions as shown on the pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped file on the CD-ROM.
If you are using a PC running Windows® CE, follow the instructions
below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Using Platform Builder, build an image file by following the step-by-step
instructions found in the zipped file on the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
If you are using a PC running Linux or Apple® Mac OS, follow the
instructions below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped file on the CD-ROM.
When changing the Touch Interface (RS-232 or USB), please follow
instructions below.
1. Uninstall the touch driver.
2. Re-start the computer.
3. Remove the original Touch Interface (RS-232 or USB).
4. Connect the computer to the Touch Interface (RS-232 or USB) that you
would like to use.
5. Load the Touch Driver CD, then follow the step-by-step instructions as show
on monitor.
PLEASE NOTE!
Don’t plug in both the RS-232 and USB cables!
Doing so may cause a driver conflict, making your touch screen inoperable.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Product Registration and Technical Support
Register Your Planar Products Today
Thank you for choosing Planar. To assure you receive all the benefits of your
Planar product and services, register your Planar product today. Visit our
website to register your product at
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector,
LCD monitor, touch screen or other Planar products visit our online store at
Technical Support
operations manuals, touch screen drivers, warranty information and access
to Planar’s Technical Library for online troubleshooting.
To speak with Planar Customer Support please have you model and serial
number available and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
Planar Systems, Inc.
Customer Service
24x7 Online Technical Support: http://www.planar.com/support
1195 NW Compton Drive
Beaverton, OR 97006-1992
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the United States.
Hours: 24 hours a day, 7 days a week
© 2011 Planar Systems, Inc. 03/11 Planar is a registered trademark of Planar Systems, Inc.
Other brands and names are the property of their respective owners.
Technical information in this document is subject to change without notice.
020-0697-00 Rev G
820450025104
Download from Www.Somanuals.com. All Manuals Search And Download.
|