Digital Video Disc Player &
Video Cassette Recorder
O wner’s Manual
DV900VHS
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety and General Information 3
Safety Precautions
W arning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Federal Com m unications Com m ission (FCC) W arning: Any unauthorized changes or modifications to
this equipment void the user’s authority to operate it.
Departm ent of Health and Hum an Services (DHHS) Certification: Complies with 21 Center for
Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this
device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.
Special Inform ation for Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio/TV Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow-
ing measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection
Unauthorized copying, broadcasting, public performance and lending of Discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Note to the Cable TV System Installer: This reminder is provided to call the Cable TV system installer’s
attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in
particular, specifying that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as possible.
High Quality
This DVD/VCR is equipped with a High Quality (HQ) system and is compatible with existing Video Home
System (VHS) equipment.
Declaration of Conform ity
Model Number:
Trade Name:
DV900VHS
Philips
Responsible Party: Philips Consumer Electronics
P.O. Box 14810
Knoxville, TN 37914
(865) 521-4316
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. (© 1992-1997 Dolby Laboratories, Inc. All rights reserved.)
DTS is a trademark of Digital Theater Systems Inc. in the United States of America.
Copyright 2001 Philips Consumer Electronics. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Table of Contents
General Inform ation
Additional VCR Features
Safety and General Information . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . .4
Introduction . . . . . . . . . . . . . . . . . . . . .5
Playable Discs . . . . . . . . . . . . . . . . . . . .6
Playable Video Cassette Tapes . . . . . . .7
MTS System . . . . . . . . . . . . . . . . . .46-47
Hi-Fi Stereo Sound System . . . . . . . . .48
Blue Background . . . . . . . . . . . . . . . . .49
Disc Playback and Features
Playing a Disc . . . . . . . . . . . . . . . . . . .50
Disc Menus . . . . . . . . . . . . . . . . . . . . .51
Pausing Playback . . . . . . . . . . . . . . . . .52
Step by Step Playback/Slow Motion . . .53
Fast Forward/Reverse Search . . . . . . .54
Track Playback . . . . . . . . . . . . . . . . . .55
Title/Chapter Playback . . . . . . . . . . . .56
Specific Time Playback . . . . . . . . . . . . .57
Repeat Playback (Discs) . . . . . . . . . . . .58
A-B Repeat Playback . . . . . . . . . . . . . .59
Programmed Playback . . . . . . . . . . . . .60
Random Playback . . . . . . . . . . . . . . . .61
Audio Language/Sound Mode . . . . . . .62
Subtitle Language . . . . . . . . . . . . . . . . .63
Camera Angles . . . . . . . . . . . . . . . . . .64
Status Display (Discs) . . . . . . . . . . . . .65
Parental Lock Levels . . . . . . . . . . . . . .66
Parental Lock Password . . . . . . . . . . .67
Setting Up Your DVD/VCR
Hookups Without a Cable Box/Direct
Broadcast System . . . . . . . . . . . . . . .8-9
Hookups With a Cable Box/Direct
Broadcast System . . . . . . . . . . . . .10-11
Optional Hookups . . . . . . . . . . . . .12-14
Remote Control Setup . . . . . . . . . . . .15
Turning on Your DVD/VCR . . . . . . . .16
Automatic Channel Setup . . . . . . . .17-19
Setting the Clock . . . . . . . . . . . . . . . . .20
Daylight-Savings Time . . . . . . . . . . . . .21
Language Selection (VCR) . . . . . . . . . .22
On-Screen Status Displays (VCR) . . . .23
Description of Controls
DVD/VCR Display - DVD Features . . .24
DVD/VCR Display - VCR Features . . .25
Front Panel . . . . . . . . . . . . . . . . . . . . .26
Rear Panel . . . . . . . . . . . . . . . . . . . . . .27
Remote Control Buttons . . . . . . . .28-31
DVD Player Setup and Features
Audio Settings . . . . . . . . . . . . . . . .68-69
Language Settings . . . . . . . . . . . . . .70-72
Video Settings . . . . . . . . . . . . . . . . . . .73
Other Menu Settings . . . . . . . . . . . . . .74
Basic VCR O perations
Playing a Video Cassette Tape . . . . . . .32
Recording on a Video Cassette Tape . .33
Inform ation You May Need
VCR Recording
Care and Maintenance / Specifications .75
Helpful Hints . . . . . . . . . . . . . . . . .76-79
Limited Warranty . . . . . . . . . . . . . .80-81
Glossary . . . . . . . . . . . . . . . . . . . . . . .82
Index . . . . . . . . . . . . . . . . . . . . . . . . . .83
Accessories . . . . . . . . . . . . . . . . . . . . .84
Recording One Channel/Watching
Another . . . . . . . . . . . . . . . . . . . . . .34
One-Touch Recording . . . . . . . . . . . . .35
Timer Recording . . . . . . . . . . . . . .36-39
Rerecording (Tape Duplication) . . . . .40
Video Cassette Tape Playback
Repeat Play (Video Cassette Tapes) . .41
Real-Time Counter Memory . . . . . . . .42
Time Search . . . . . . . . . . . . . . . . . . . .43
Special Effects Playback . . . . . . . . . . . .44
Automatic Operation Features . . . . . .45
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction 5
W elcom e!
This DVD/VCR combines a Digital Video Disc (DVD) Player and a Hi-Fi Video Cassette Recorder (VCR) into
one unit, allowing you to play DVDs, Audio Compact Discs (Audio CDs), and video cassette tapes from one
piece of equipment. The DVD Player of this DVD/VCR will allow you to enjoy better picture quality, clearer
sound, and endless playback features available on DVDs. Expanding technology allows you to add options to
your viewing - watch a director’s cut of a movie, listen to the producer’s comments, or play your favorite
scene over and over again. Hear a movie in different languages, or listen only to the soundtrack. The possibili-
ties are limited only by your choices and the materials available on the DVD.
When playing Audio CDs, determine the order in which you want to hear the songs, or play the Disc repeat-
edly - all while seeing the status of the CD on your television.
We hope you enjoy this DVD/VCR and learn to use all of its features. To get the most out of the DVD/VCR,
read this owner’s manual carefully. It will describe how you can access all the features listed below.
Features
VCR
• Automatic Channel Setup
• Automatic Head Cleaner
• 19 micron head
• On-Screen Displays in English or Spanish
• One-Touch Recording
• Real-Time Counter
• Automatic Operation Features
• Automatic Tracking Adjustment
• Blue Background
• Repeat Play
• Daylight-Savings Time
• S-VHS Quasi Play Back (SQPB)
• Special Effects Playback: Forward and Reverse
Searching; Still; Slow Motion
• Time Search
• Hi-Fi Stereo Sound System
• High Quality (HQ) System
• MTS (Multi-Channel Television Sound) System
• Timer Recording
DVD
• Audio Language/Sound Mode Choices*
• Automatic Detection of Disc Type
(Audio CD or DVD)
• Program Playback (Audio CD only)
• Random Playback (Audio CD only)
• Screen Saver
• DVD Menus in a Desired Language *
• On-Screen Display
• Multiple Camera Angles*
• Subtitles in a Desired Language *
• Parental Lock*
• Paused/Fast/Slow/Step-by-Step Playback
* If available on the Disc
W hen referring to this m anual, rem em ber...
Indicates that the feature described is available on video cassette tapes when the DVD/VCR is in VCR mode.
VCR
Indicates that the feature described is available on some Digital Video Discs when the DVD/VCR is in
DVD mode.
DVD
Indicates that the feature described is available on some Audio Compact Discs when the
DVD/VCR is in DVD mode.
AUDIO CD
Disc Menus...
Some explanations in this manual are intended to describe the Disc menus. These menus are set by the movie
producers or by the music industry, and the menus will vary among Discs. Furthermore, not all Discs are guar-
anteed to have menus. However, if the Disc has a menu, you can access the Disc menu by pressing the DVD
button, then pressing the MENU button on the remote control. (Make sure the DVD/VCR is in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.)
DVD Menus...
Some instructions explain how to use the DVD player’s menu to set up features of the DVD player or the Disc.
You get to the DVD player menu by pressing the SETUP button on the remote control when playback is
stopped. Even if a feature is set up in the DVD player’s menu, it may not be available if the current Disc does
not include that feature.
Available Disc Features...
Not all of the features described in this manual may be available on every DVD or Audio CD. If
the feature is not available on the Disc, you cannot use the DVD/VCR to make these features
available. The “No feature” symbol will appear on the TV screen if you try to set up a feature that
is not available on the current Disc or is not available at the current time.
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Playable Discs
This DVD/VCR will play Digital Video Discs (DVDs) and Audio CDs. In order to play
a DVD or Audio CD on this DVD/VCR, make sure the Disc meets the requirements
for Region Codes and Color Systems as described on this page. Also, the Discs should
be labelled with the following logos and should meet these standards.
Maxim um
Playback Tim e
Disc
Segm ents
Disc Type
Logo
Contents Disc Size
Approx. 4 hours
(single-sided)
Approx. 8 hours
(double-sided)
DVDs are
12 cm
divided into Titles,
which are divided
into Chapters.
Digital
Video
Disc
Sound
and
Pictures
Approx. 80 minutes
(single-sided)
Approx. 160 minutes
(double-sided)
Titles and Chapters
are numbered.
8 cm
12 cm
74 minutes
20 minutes
Audio CDs are divided
into numbered Tracks, i.e.,
a track may be one song.
Audio
CD
Sound
8 cm
(singles)
Region Codes
DVDs also must be labelled for ALL regions or for Region 1 in order to be played on
this DVD/VCR. You can not play Discs that are labelled for other regions.
Look for the symbols below on your DVDs. If these region symbols do not appear on
your DVD, you cannot play the DVD in this DVD/VCR.
The number inside the globe refers to a region of the world. Region 1 represents the
United States, Canada, upper regions of North America, Bermuda, the U.S. Virgin
Islands, and small regions near Australia.
A Disc encoded in a specific region format can only be played on DVD players with
the same region code. For example, if a Disc is labelled for Region 2, you can not play
the DVD on this DVD/VCR.
Color System s
Different color systems are available throughout the world. The most common color
systems are NTSC, which is used primarily in the United States and North America,
PAL, and SECAM.
This DVD/VCR uses the NTSC color system. Therefore, the Discs that you play must
be recorded in the NTSC system. You cannot play Discs recorded in other formats.
The color system of the DVD may be listed on the DVD or on the Disc jacket.
Unacceptable Discs
The following Discs cannot be played on this DVD/VCR.
• CD-ROM
• DVD-RAM
• Compact Disc-Interactive (CD-I)
• Compact Disc-Recordable (CD-R)
• Digital Video Disc-Video Recordable
(DVD-VR)
• DVD-ROM
• Photo CD
• Video CD
• Video Single Disc (VSD)
The following discs may be played, but only the audio will be available. There will be
no picture.
• Compact Disc-Graphic (CD-G)
• Compact Disc-Video (CD-V)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Video Cassette Tapes 7
Playable Video Cassette Tapes
This DVD/VCR is equipped with a High Quality (HQ) system and is
compatible with existing Video Home System (VHS) equipment.
Philips Consumer Electronics recommends that you use only video
cassette tapes which are labeled with the
mark. The use of
other tapes may result in poor picture quality and excessive deposits
on the video heads, which may not be covered by the warranty if
damage occurs.The 19 micron head provides a better picture when
you view tapes recorded in slow speed (SLP).
Recording Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
1
2
1
To prevent recording, break off the tab with a screwdriver.
2
To allow recording, cover the hole with cellophane tape.
DVD/VCR m aintenance
● Use only tapes with the
mark.
● Remove any light adhesive stick-on notes from the video cas-
sette tape before putting the tape in the DVD/VCR. Removable
labels can jam the DVD/VCR.
● Periodic maintenance is required to maintain your DVD/VCR’s
excellent performance. This DVD/VCR has an Automatic Head
Cleaner. However, the video heads will require replacement
eventually. Only an authorized service center should perform
this service.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Hookups Without a Cable Box/Direct Broadcast System
The basic antenna/cable to DVD/VCR to TV is shown below.
If you have a Cable Box or a Direct Broadcast System , please see pages 10-11. For better
sound and picture quality when using the DVD player, refer to the O ptional Hookups on pages
12-14. After you hook up the DVD/VCR, go to page 16 to turn on the DVD/VCR.
1
Disconnect the antenna or cable from your TV.
Antenna
Indoor/O utdoor
(300 ohm)
75
ANT /
CABLE
75Ω
ANT
/
CABLE
OR
ANTENNA IN
Jack
(on back of TV)
Cable
(75 ohm)
2
Connect the antenna or cable to the ANT-IN (Antenna In) Jack of your
DVD/VCR.
Back of DVD/VCR
Antenna
Indoor/O utdoor
(300 ohm)
-IN
OR
ANT-OUT
CH3 CH4
Cable
(75 ohm)
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookups Without a Cable Box/Direct Broadcast System (cont’d) 9
3
Connect the RF coaxial cable (supplied) to the ANT-IN (Antenna In) Jack on the
back of the DVD/VCR and to the ANTENNA IN Jack on the TV. (You may use
either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)
ANT-IN
Antenna
or Cable
75
ANT /
CABLE
75‰
ANT
CABLE
/
ANT-OUT
ANTENNA IN Jack
(on back of TV)
exam ple only
CH3 CH4
RF coaxial cable
4
Plug in the TV and the DVD/VCR.
5
Set the CH3/CH4 switch on the back of the DVD/VCR to CH3 or CH4,
whichever channel is not used or least used in your area. Set the TV to the sam e
channel. For example, when playing a tape, if the CH3/CH4 switch is set to CH3, the
TV should be on channel 03.
CH 4
or
CH 3
ANT-IN
CH3 / CH4
Switch
ANT-OUT
CH3 CH4
CH3 CH4
6
You are ready to turn on the DVD/VCR. Please go to page 16 before turning
on the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Hookups With a Cable Box/Direct Broadcast System
There are two ways to connect your Cable Box/DBS to the DVD/VCR. With this connection:
● You may view any channel.
● You must select channels at the Cable Box/DBS. Channels cannot be changed at the DVD/VCR.
● You may not view a channel other than the one you are recording.
● You may not program channels at the DVD/VCR.
● You can only program a timer recording for one channel at a time. Set the TV and the DVD/VCR to the
Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch to the same channel. Set your
Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a
timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 37.)
Leave the Cable Box/DBS on for a timer recording.
Cable Box/DBS
DVD/VCR
1
75
ANT /
CABLE
IN
OUT
DVD/VCR
OUT
IN
ANT-IN
2
L
DVD/VCR
AUDIO OUT
AUDIO
R
L
RF coaxial
cable
ANT-OUT
R
VIDEO
Cable
Signal
CH3 CH4
TV’s
ANTENNA IN
Jack
RF coaxial
cable
3
Connections
1
Connect a Cable signal to the IN Jack on the Cable Box/DBS.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack on the Cable
Box/DBS to the ANT-IN (Antenna In) Jack on the DVD/VCR.
3
Use a second RF coaxial cable to connect the ANT-OUT (Antenna Out) Jack on
the DVD/VCR to the TV’s ANTENNA IN Jack.
Recording/Viewing Any Channel
1
With the DVD/VCR on and in VCR position (the VCR light and the VCR/TV
light will appear on the display panel), use the CHANNEL o/p buttons to
set the DVD/VCR to the Cable Box/DBS output channel (channel 03
or 04). Set the CH3/CH4 switch to the sam e channel.
2
Set the TV to the sam e channel to which you set the DVD/VCR.
3
Select the channel you want to view/record at the Cable Box/DBS.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookups With a Cable Box/Direct Broadcast System (cont’d) 11
With this connection:
● You may watch one channel while recording another.
● You may not record scrambled channels.
DVD/VCR
1
Cable Box/DBS
DVD/VCR
OUT
IN
75
AN
2
ANT-IN
L
T /
DVD/VCR
C
A
BLE
AUDIO OUT
AUDIO
R
L
ANT-OUT
IN
R
VIDEO
OUT
CH3 CH4
Cable
Signal
RF coaxial
cable
TV’s ANTENNA
RF coaxial
cable
IN Jack
3
Connections
1
Connect a Cable signal to the DVD/VCR’s ANT-IN (Antenna In)
Jack.
2
Use an RF coaxial cable (supplied) to connect the ANT-OUT
(Antenna Out) Jack on the DVD/VCR to the IN Jack on the Cable
Box/DBS.
3
Use a second RF coaxial cable to connect the OUT Jack on the
Cable Box/DBS to the ANTENNA IN Jack on the TV.
Recording O ne Channel/W atching Another
1
Put the Cable Box/DBS on the sam e channel as the
DVD/VCR’s CH3/CH4 switch. Set the TV to the Cable
Box/DBS output channel (03 or 04).
Then, with the DVD/VCR in VCR position (the VCR light and the
VCR/TV light will appear on the display panel), use the CHAN-
NEL o/p buttons to select the channel you want to
record at the DVD/VCR. Start the recording.
Helpful Hint
2
Press the VCR/TV button once to put the DVD/VCR in
TV position. (The VCR/TV light will disappear.)
• When you play a tape, make sure
the Cable Box/DBS is set to the
same channel as the CH3/CH4
switch on the DVD/VCR. Set the
TV to the Cable Box/DBS output
channel (03 or 04).
3
Select the channel you want to watch at the Cable
Box/DBS.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Optional Hookups
You may connect the DVD/VCR several different ways, depending on your existing equipment and your prefer-
ences for sound and picture quality. To determine which hookup is best for you, examine the options on the
following pages, then see which best matches your situation. Before you hook up the DVD/VCR, remember:
● Connect the DVD/VCR directly to a TV. If you connect the DVD/VCR to a VCR, then connect the VCR to
the TV, the picture may be distorted by the copyright protection system.
● Turn off the power of all equipment before making any connections.
● Refer to the owner’s manuals of your other equipment for additional information.
● Depending on your connection, you may need to purchase additional cables.
● When you use the DVD/VCR AUDIO and VIDEO OUT jacks on the DVD/VCR, press the DVD/VCR
OUTPUT button to select VCR mode (or DVD mode).
● The S-VIDEO OUT, COAXIAL, OPTICAL, and COMPONENT VIDEO OUT jacks are useful only in DVD
mode.
Connecting the DVD/VCR to a Stereo TV
Audio and Video
IN Jacks on TV
antenna or
cable to
ANT-IN
Jack
Video Cable
3
2
1
Audio Cables
1
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO OUT
jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV, m atching the cable col-
ors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the
DVD/VCR’s white DVD/VCR AUDIO OUT jack to the TV’s AUDIO IN jack. You will not use the red audio cable.
3
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and
to the VIDEO IN jack on the TV. Or, for better picture quality, connect an S-Video cable (not supplied) to the
S-VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV. You will not use the supplied yellow
video cable.
4
Connect the TV’s power cord to a power outlet. Turn on the TV and set it to the Audio/Video In
channel, which also may be referred to as A/V In or Auxiliary In. This channel usually is located near channel 00.
See your TV owner’s manual for details. Or, if you used the S-Video cable at step 3, select the S-Video In channel
at your TV. See your TV owner’s manual for details.
5
Connect the DVD/VCR’s power cord to a power outlet. Press the POW ER button, then press the
DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. “HELLO” will appear
briefly on the DVD/VCR’s display panel. You should see the DVD logo on the TV screen briefly. If you do not,
check your connections and make sure the TV is set to the correct Audio/Video In channel. If there is no disc in
the DVD/VCR, “no DISC” will appear on the display panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Hookups (cont’d) 13
Connecting to a TV and a Stereo
TV has Component Video In Jacks
● Set DOLBY DIGITAL and DTS to OFF on the DVD/VCR. Details are on pages 68-69. If you play a DVD
when the settings are wrong, the sound will be distorted or you may damage the speakers.
1
DVD/VCR
OUT
COMPONENT
VIDEO OUT
IN
ANT-IN
Y
DIGITA
L
DVD/VCR
S-VIDEO
OUT
PCM
/
BITSTREAM
AUDIO OUT
AUDIO
R
COAXIAL
Cb
Cr
L
ANT-OUT
R
VIDEO
1
CH3 CH4
DVD/VCR
COMPONENT
VIDEO IN
Y
2
AUDIO (RIGHT) IN
Cb/B-Y
Cr/R-Y
3
AUDIO (LEFT) IN
Back of TV
(exam ple only)
Back of Stereo
(exam ple only)
1
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect the red and white audio cables to the red and white DVD/VCR AUDIO OUT Jacks on
the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo, m atching the cable col-
ors to the jack colors.
3
Connect an optional com ponent video cable to the COMPONENT VIDEO OUT jacks on the
DVD/VCR and to the COMPONENT VIDEO IN jacks on the TV.
4
Plug in the Stereo’s power cord. Turn on the Stereo and select the Stereo’s Auxiliary IN station.
During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner’s manual for details.
5
Plug in the TV’s power cord. Turn on the TV and set it to the Com ponent Video In channel,
which usually is located near channel 00. During Audio CD playback, you may check the status of Audio
CDs on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s
manual for details.
6
Connect the DVD/VCR’s power cord to a power outlet. Press the POW ER button, then press
the DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. “HELLO” will
appear briefly on the DVD/VCR’s display panel. You should see the DVD logo on the TV screen briefly. If you
do not, check your connections and make sure the TV is set to the correct Component Video In channel. If
there is no disc in the DVD/VCR, “no DISC” will appear on the display panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Optional Hookups (cont’d)
Connecting to a Dolby Digital Decoder, DTS Decoder, or Amplifier
Some Discs are recorded in a 5.1 channel Dolby Digital Surround or Digital Theater System (DTS) Surround format.
These Discs will sound best if you connect the DVD/VCR to a Dolby Digital or DTS Decoder.
● You will need a coaxial digital audio cable or an audio optical cable (not supplied). See Helpful Hints below.
● If you use the OPTICAL jack, remove the protective cap.
● If you connect the DVD/VCR to a Dolby Digital Decoder, set DOLBY DIGITAL to ON. Details are on pages 68-69.
● If you connect the DVD/VCR to a DTS Decoder, set DTS to ON. Details are on pages 68-69.
● If the DVD/VCR is not connected to a Dolby Digital or DTS decoder, set DOLBY DIGITAL and DTS to OFF.
Incorrect settings may cause noise distortion and damage the speakers.
● Select the 5.1 channel Dolby Digital Surround sound in the Disc menu.
● Connect a subwoofer and the center, front, and surround speakers to the Decoder as described in the Decoder
owner’s manual.
● If the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound using a
Mini-Disc or Digital Audio Tape1Deck.
VIDEO
V
ID
E
O
1
L
/M
O
N
O
A
U
D
IO
R
i
n
DVD/VCR
VIDEO IN
Back of Decoder
(exam ple only)
Back of TV
3
2
(exam ple only)
COAXIAL DIGITAL
AUDIO IN
1
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect a coaxial digital audio cable (not supplied) to the COAXIAL jack on the DVD/VCR and to
the COAXIAL DIGITAL AUDIO IN jack on the Decoder or Am plifier. (Or, you may connect an audio
optical cable (not supplied) to the OPTICAL jack on the DVD/VCR and to the OPTICAL DIGITAL AUDIO IN jack
on the Decoder or Amplifier.)
3
Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO OUT jack on the DVD/VCR
and to the VIDEO IN jack on the TV. (Or, you may connect a component video cable or a S-Video cable. Details
are on pages 12-13.)
Helpful Hints
4
Plug in the power cord of the Decoder or Am plifier. Turn on the
• Optical cable may be
Decoder or Am plifier and select its Auxiliary IN station. During
Minimum 6 in.
damaged when bent
in diameter
Disc playback, you will adjust the volume at the Decoder or Amplifier. See
at acute angles.
Ensure cables are
its owner’s manual for details.
coiled in loops with a
diameter of 6 inches or more
when storing them.
• Use a cable which is 9.8 feet or
shorter.
5
Plug in the TV’s power cord. Turn on the TV and set it to the
correct Video In channel. During Audio CD playback, you may check
the Disc status on your TV screen. During DVD playback, you will watch
the program on the TV. See your TV owner’s manual for details.
• Insert cable plugs firmly into the
jacks when making connections.
• If a plug has minor scratches or is
dirty, clean it with a soft cloth
before inserting it into a jack.
• Replace the protective cap on the
OPTICAL jack when it is not in use.
6
Connect the DVD/VCR’s power cord to a power outlet. Press the
POW ER button, then press the DVD/VCR OUTPUT button so
that the DVD light appears on the DVD/VCR. “HELLO” will appear
briefly on the DVD/VCR’s display panel. You should see the DVD logo on
the TV screen briefly. If you do not, check your connections and make sure
the TV is set to the correct Video In channel. If there is no disc in the
DVD/VCR, “no DISC” will appear on the display panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Setup 15
Putting Batteries in the Rem ote Control
1
1
Rem ove the battery com partm ent lid on the bottom of the
remote control by pressing the tab, then lifting the lid.
2
Place two AA batteries inside the battery com partm ent
with their and ends aligned as indicated.
+
–
2
3
3
Replace the battery com partm ent lid.
Using the Rem ote Control
● Point the remote control at the DVD/VCR’s remote sensor
(see page 26) when using the remote control to operate the
DVD/VCR.
● Do not put objects between the remote control and the
DVD/VCR.
Recycling Guidelines/Battery Safety
● Your new product and its packaging contain materials that can be
recycled and reused. Specialized companies can recycle your
product to increase the amount that needs to be properly dis-
posed. Your product uses batteries that should not be thrown
away when depleted but should be disposed of as small chemical
waste. Please find out about the local regulations on disposal of
your old product, batteries, and packaging whenever you replace
existing equipment.
● Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on
the battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon
with alkaline; and
Remove batteries when the unit will not be used for a long
time.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Turning on Your DVD/VCR
Before turning on your DVD/VCR, make sure batteries are in the
remote control and the DVD/VCR and TV are connected correctly.
● You can not program channels if you are using a Cable Box or a
Direct Broadcast System.
Turn on the TV.
2
1
1
POWER
TIMER SET
Press the VCR button, then press the PO W ER button.
“HELLO” will appear briefly on the front of the DVD/VCR. The VCR
light, the VCR/TV light, and the POWER light will appear on the front
of the DVD/VCR.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
PLAY
STOP
3
4
2
REW
F.FWD
Turn on the TV. Set it to the sam e channel as the CH3/CH4
switch on the back of the DVD/VCR. The display shown below
will appear. (If the display does not appear, check your hookups, then
follow the steps on page 17 to set up channels and page 22 to select a
language.)
5
PAUSE
1
4
2
5
8
3
6
9
SELECT op
→ ENGLISH
ON
ESPAÑOL
SLOW
7
A
B
SPEED
+10
MAKE SELECTION OR
PUSH MENU TO CONTINUE
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
3
RETURN
W ithin 60 seconds, press the PLAY button or the STO P but-
ton to select English or Spanish on-screen displays and
m enus.
Helpful Hints
4
Press the MENU button.
• To skip this feature and play a tape
immediately, insert a tape with its
record tab removed. Or, to skip step
3, press the MENU button. All on-
screen displays will be in English. To
skip step 5, press the STOP button.
Channels will not be programmed,
and CHANNELS NOT SET will
appear on the screen.
• If you try to program channels when
there is no antenna or cable con-
nected to the DVD/VCR, program-
ming will appear to take place, but
eventually a NO TV SIGNALS mes-
sage will appear. Connect an anten-
na or cable to the DVD/VCR’s ANT-
IN (Antenna In) jack and press the
CHANNEL o button again. If chan-
nel programming does not resume,
you may need to follow the steps on
page 17.
CONNECT ANTENNA OR CABLE
TO VCR
THEN...
PUSH CH UP KEY
OR...
FOR PLAY ONLY - PUSH STOP
5
W ithin 60 seconds, press the CHANNEL o button to begin
autom atic channel program m ing. AUTO CH PROGRAMMING
IN PROCESS PLEASE WAIT will appear on the TV screen. The
DVD/VCR will memorize all available channels. When all channels are
memorized, CHANNELS ARE SET will appear on the screen briefly,
then TV programming will appear.
These channels will be available when you want to watch TV while in
VCR mode. To put the DVD/VCR in VCR mode, press the
DVD/VCR OUTPUT button so that the VCR light appears. Then
press the VCR/TV button so that the VCR/TV light appears. Press the
VCR button, then use the CHANNEL and Number buttons to select
a TV channel for viewing.
• You may need to repeat the steps
on this page if a power failure
occurs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Channel Setup 17
Although your DVD/VCR may automatically memorize the chan-
nels you receive when you turn it on for the first time, this func-
tion lets you set up the channels again.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
1
VCR/TV
MEMORY
VCR
Press the VCR button, then press the MENU button.
DVD
SELECT op CHOOSE
B
1
1
PLAY
STOP
2-3
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
REW
F.FWD
TO END PUSH EXIT
PAUSE
1
4
2
5
8
3
6
9
2
SLOW
Press the PLAY button or the STO P button to select
TUNER SET UP, then press the F.FW D button.
7
A
B
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
SELECT op CHOOSE
B
→ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
ON
2ND AUDIO
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select
AUTO PROGRAMMING, then press the F.FW D button.
The DVD/VCR will memorize all the channels you receive.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START
FINISH
Helpful Hints
• You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR or AV FRONT will
appear on the screen briefly.
• You can not program channels if
you are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have a
cable connection, channels 1-125
will be available.
4
W ait for a few m inutes while the DVD/VCR sets up the
channels. When this is complete, CHANNELS ARE SET will
appear on the screen. Then the programming of the lowest chan-
nel number placed in the DVD/VCR’s memory will appear on the
screen. Now when you press the CHANNEL o/p buttons, you
will scan only through channels you receive.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Automatic Channel Setup (cont’d)
Adding/Deleting Channels
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
1
DVD
Press the VCR button, then press the MENU button.
1
1
SELECT op CHOOSE
B
PLAY
STOP
2-5
6
REW
F.FWD
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
PAUSE
1
4
2
5
8
3
6
9
2
SLOW
7
Press the PLAY button or the STO P button to select
TUNER SET UP, then press the F.FW D button.
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
3
Press the PLAY button or the STO P button to select
ADD/DELETE CH, then press the F.FW D button.
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
SELECT op ADD/DELETE
B
124
125
1
DELETED
DELETED
DELETED
ADDED
→
2
3
ADDED
TO END PUSH EXIT
NOTE: If you have an antenna, channel numbers 2-69 will appear on
the ADD/DELETE CH menu. If you have a cable connection, channels
1-125 will be available.
4
Press the PLAY button or the STO P button until the
channel num ber you want to add or delete appears beside
the arrow.
SELECT op ADD/DELETE
B
16
17
18
19
20
DELETED
ADDED
ADDED
ADDED
ADDED
→
TO END PUSH EXIT
5
Press the F.FW D button to select ADDED or DELETED.
Repeat steps 4 and 5 until you have added or deleted all the chan-
nels you wanted to add or delete.
6
Press the DISPLAY/STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Channel Setup (cont’d) 19
Reviewing Mem orized Channels
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
POWER
TIMER SET
1
DVD/VCR
OUTPUT
Press the VCR button, then press the MENU button.
VCR/TV
MEMORY
VCR
DVD
SELECT op CHOOSE
B
1
1
PLAY
STOP
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
2-3
4
REW
F.FWD
TO END PUSH EXIT
PAUSE
1
4
2
5
8
3
6
9
2
Press the PLAY button or the STO P button to select
TUNER SET UP, then press the F.FW D button.
SLOW
7
A
B
SPEED
+10
SELECT op CHOOSE
B
0
→ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
ON
REPEAT
TITLE
STATUS/EXIT
2ND AUDIO
MENU
ENTER
RETURN
ANGLE
TO END PUSH EXIT
SETUP
MODE AUDIO
SUB TITLE
3
Press the PLAY button or the STOP button to select CH
MEMORY REVIEW , then press the F.FW D button. A list of
memorized channels will appear on the screen.
● If all the memorized channels don’t fit on the screen, press the
F.FWD button to see the remaining channels. Then press the
REW(ind) button to return to the first screen of channels.
● If you do not press any buttons within 10 seconds, you will either
go to the next screen of channels or you will return to the previ-
ous menu.
4
Press the DISPLAY/STATUS/EXIT button once or twice
to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Setting the Clock
Follow the steps below to set the clock for the VCR. Make sure:
● The DVD/VCR is on and the VCR/TV light appears on the dis-
play panel. (If it does not, press the VCR/TV button once.)
● You make each entry within 60 seconds of the previous entry.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
4-5
2-3
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
DVD
VCR
1
1
PLAY
STOP
Press the VCR button, then press the MENU button.
REW
F.FWD
2
Press the PLAY button or the STO P button to select SET
CLO CK, then press the F.FW D button.
PAUSE
1
4
2
5
8
3
6
9
SLOW
3
7
A
B
SPEED
+10
Press the PLAY button or the STO P button to select SET
CLO CK, then press the F.FW D button.
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
TIME – – :– –
MENU
ENTER
6
DATE – – / – – / – –
RETURN
ANGLE
1
SETUP
MODE AUDIO
SUB TITLE
TO END PUSH EXIT
4
Press two Num ber buttons for the hour(s) and two
Num ber buttons for the m inute(s). Then press 1 for AM
or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.
TIME 02 :15 PM
MONTH – – / – – / – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Helpful Hints
• Enter a 0 before a single-digit num-
ber.
• Entries that do not match the
DVD/VCR’s clock or calendar will
cause a question mark to appear on
the screen.
• To make corrections, press the CLEAR
button until the space for the number
you want to correct is flashing. Then
enter the correct number.
5
Press two Num ber buttons for the m onth, two Num ber
buttons for the day, and two Num ber buttons for the
year. For example, for July 1, 2000, press 07, 01, 00. The day of
the week will appear automatically.
TIME 02 :15 PM
DATE 07 / 01 / 00
SAT.
• To see the current time on the TV
screen, press the DISPLAY/STATUS/
EXIT button. Details are on page 23.
• Power failures that last for more than
one minute can cause you to lose
your clock setting.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
6
Press the DISPLAY/STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Daylight-Savings Time 21
You may program the DVD/VCR so the VCR clock will automati-
cally move forward one hour in April and turn back one hour in
October. Daylight-Savings Time is set to ON when you receive
your DVD/VCR. Turn Daylight-Savings Time ON or OFF by fol-
lowing the steps below. Before you begin:
● Make sure the clock is set.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
DVD
MEMORY
VCR
1
1
PLAY
STOP
1
REW
F.FWD
Press the VCR button, then press the MENU button.
2-3
4
SELECT op CHOOSE
B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
PAUSE
1
4
7
2
5
8
3
6
9
TO END PUSH EXIT
SLOW
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
2
Press the PLAY button or the STO P button to select SET
CLO CK, then press the F.FW D button.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SET CLOCK
SETUP
MODE AUDIO
SUB TITLE
→ SET CLOCK
DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE
B
TO END PUSH EXIT
3
Press the PLAY button or the STO P button to select
DAYLIGHT SVG TIME. Then, press the F.FW D button so
that O FF (or O N) appears beside DAYLIGHT SVG TIME.
SET CLOCK
SET CLOCK
→ DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE
B
TO END PUSH EXIT
4
Press the DISPLAY/STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Language Selection (VCR)
Follow the steps below to change the language of the VCR on-
screen displays and menus.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
1
DVD
Press the VCR button, then press the MENU button.
SELECT op CHOOSE
B
1
1
PLAY
STOP
REW
F.FWD
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
2-4
5
TO END PUSH EXIT
PAUSE
1
4
2
5
8
3
6
9
2
SLOW
Press the PLAY button or the STO P button to select
VCR SET UP, then press the F.FW D button.
7
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
SELECT op CHOOSE
B
REPEAT
TITLE
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
OFF
STATUS/EXIT
MENU
ENTER
LANGUAGE
BLUE BACKGROUND ON
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
TO END PUSH EXIT
3
Press the PLAY button or the STO P button to select
LANGUAGE, then press the F.FW D button.
SELECT op
→ ENGLISH
ON
ESPAÑOL
MAKE SELECTION OR
TO END PUSH EXIT
4
Helpful Hint
Press the PLAY button or the STO P button to select
English or Spanish (ESPAÑO L)on-screen displays and
m enus.
• If you accidentally select Spanish
and need English:
1. Press the VCR button, then press
the MENU button.
5
2. Press the PLAY button or the STOP
button to select PREPARE EL VCR,
then press the F.FWD button.
3. Press the PLAY button or the STOP
button to select LENGUAJE, then
press the F.FWD button.
Press the DISPLAY/STATUS/EXIT button.
4. Press the PLAY button or the STOP
button to select ENGLISH.
5. Press the DISPLAY/STATUS/EXIT
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Status Displays (VCR) 23
A status display will appear when you press the
DISPLAY/STATUS/EXIT button or certain function buttons. The
contents of the status display will vary. To choose the status display
mode, follow the steps below.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
If you select STATUS ON, then select COUNTER ONLY
ON:
● Whenever you press the STOP button or the PLAY button, the
status display will appear for five seconds. After five seconds, only
the counter will remain on the screen. You must press the DIS-
PLAY/STATUS/EXIT button to remove it. Portions of the status
display also may appear when you press other function buttons.
If you select STATUS ON, then select COUNTER ONLY
OFF:
Receiving and Recording Mode
Channel
Current status
of tape
Time
STOP
TV STEREO
12:00 AM
CH10
STEREO
2ND AUD
M 1:23:45 HIFI
● Whenever you press the STOP button or the PLAY button, the
status display will appear for five seconds. Portions of the status
display also may appear when you press other function buttons.
If you select STATUS OFF:
SLP
● The status display will not appear when you press function but-
tons. You must press the DISPLAY/STATUS/EXIT button to see Tape
Counter
and
Counter
Memory
Audio Out Mode
Speed
the status display.
MTS
Broadcast
Available
1
Press the MENU button.
2
Press the PLAY button or the STOP button to select VCR
SET UP, then press the F.FW D button.
3
Press the PLAY button or the STOP button to select ON
SCREEN MODE, then press the F.FW D button.
4
Press the PLAY button or the STOP button to select STA-
TUS, then press the F.FW D button so that OFF (or ON)
appears beside STATUS.
SELECT op CHOOSE
B
→ STATUS
COUNTER ONLY
[ON]
[OFF]
TO END PUSH EXIT
Helpful Hints
5
• You may not access a status display
when viewing a still picture, during
slow motion playback, or during for-
ward or reverse searching.
• The status display may not appear
if a weak channel is selected and
BLUE BACKGROUND is set to OFF.
Details are on page 49.
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY button or the STOP button to
select COUNTER ONLY, then press the F.FW D button so
that OFF (or ON) appears beside it.
6
Press the DISPLAY/STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 DVD/VCR Display - DVD Features
Display
DVD Light (red)
Messages about current DVD
operations appear here. See
Display Messages below.
This light appears when the DVD/VCR is in DVD mode. You can only
watch DVDs when the DVD light is on. To make the DVD light come
on, press the OUTPUT button on the front of the DVD/VCR.
POWER
OPEN/CLOSE
VIDEO
OUTPUT
TIMER SET
L
DVD
VCR
VCR/TV
CST.IN
CHANNEL
AUDIO
R
STOP
PLAY
STOP/EJECT
REW
PLAY
F.FWD
RECORD
Disc loading tray
PO W ER Light
Insert a Disc here.
This Light appears when the
power is on.
Lit when a DVD is
inserted.When the
DVD light is on, the
disc is loaded completely
and is ready for playback.
Displays a title
number (DVD)
Lit when an Audio CD
is inserted.When the
CD light is on, the disc is
loaded completely and is
ready for playback.
Displays a chapter (DVD)
or track (Audio CD) number
Displays the elapsed time
of the current title (DVD)
or track (Audio CD)
Display Messages
Power is turning on.
Appears after the disc tray closes if the tray
is empty.
Tray is opening or is open.
Tray is closing.
Appears briefly when you press the SKIP buttons
to search for the next or previous chapter/track.
Power is turning off.
Disc is loading.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/VCR Display - VCR Features 25
Cassette Com partm ent
Insert a tape here.
POWER
OPEN/CLOSE
VIDEO
L
OUTPUT
TIMER SET
DVD
VCR
VCR/TV
CST.IN
CHANNEL
AUDIO
R
STOP
PLAY
STOP/EJECT
REW
PLAY
F.FWD
RECORD
POWER
VIDEO
L
TIMER SET
VCR
VCR/TV
CST.IN
CHANNEL
AUDIO
R
STOP/EJECT
REW
PLAY
F.FWD
RECORD
VCR Light (Green)
RECO RD Light
PO W ER Light
This light appears
when the power
is on.
This light appears when the DVD/VCR
is in VCR mode.You can only watch
tapes when the VCR light is on. To
make the VCR light come on, press
the OUTPUT button on the front of
the DVD/VCR.
This light appears during
a recording. It flashes
when a recording is
paused.
CST. IN (Cassette-
Inside) Light
This light appears when a
tape is in the DVD/VCR.
TIMER SET Light
This light glows when the DVD/VCR is in
VCR/TV Light
standby mode or off for a timer recording or
during a One-Touch Recording. It flashes if the
TIMER SET button is pressed for a timer
recording, but there is no tape in the
DVD/VCR. It flashes when all timer recordings
or One-Touch Recordings are finished.
This light appears when the
DVD/VCR is in VCR posi-
tion. This light does not
appear when the DVD/VCR
is in TV position.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 Front Panel
PO W ER Button
Press to turn the power on and off.
TIMER SET Button
Press to put the DVD/VCR into standby mode for a timer recording. Details are on page 38.
CHANNEL Buttons
In VCR mode, press to change channels at the DVD/VCR. Or, press to adjust the tracking of a
tape during normal playback or slow motion playback. Also, press to remove vertical jitter in a
Still picture. Details are on page 45.
RECO RD Button
Press once to start a recording. Press repeatedly to start a One-Touch Recording.
Details are on page 35.
PLAY Button
Press to play a tape. Press to release Slow, Search, or Still mode and return to
tape playback. Details are on page 44. Press to select an item in the VCR menu.
Rem ote Sensor
SEARCH Buttons
Receives a signal from your
remote control so you can
operate your DVD/VCR
from a distance.
Press for a fast forward or
reverse search during Disc play-
back. Details are on page 54.
POWER
OPEN/CLOSE
VIDEO
L
TIMER SET
OUTPUT
DVD
VCR
VCR/TV
CST.IN
CHANNEL
AUDIO
R
STOP
PLAY
STOP/EJECT
REW
PLAY
F.FWD
RECORD
PLAY Button
Press to start or
resume Disc playback.
Details are on page 50.
F.FW D (Fast
Forward) Button
O UTPUT Button
Press to select DVD mode
or VCR mode.
When tape playback is
stopped, press to fast
O PEN/CLO SE Button
Press to open or close the Disc tray.
Details are on page 50.
forward the tape at high
speed. During tape play-
back, press to fast for-
ward the tape while the
picture stays on the
screen. Details are on
page 44. Press to
STOP/EJECT Button
Press once to stop the tape.
When playback is stopped,
press to eject the tape. Press to
select an item in the VCR menu.
STO P Button
Press to stop Disc playback.
Details are on page 50.
advance to the next
VCR menu or to
change the setting of an
item in the VCR menu.
REW (ind) Button
When tape playback is stopped, press to rewind the tape at high speed. During
playback, press to rewind the tape while the picture stays on the screen. Details
are on page 44. Press to return to a previous VCR menu.
AUDIO In Jacks
Connect audio cables coming from the audio out jacks of a cam-
corder, another VCR, or an audio source here. Details are on page 40.
VIDEO In Jack
Connect a video cable coming from the video out jack of a camcorder, another VCR, or
a video source (laser disc player, video disc player, etc.) here. Details are on page 40.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel 27
ANT-IN (Antenna In) Jack
Connect your antenna or cable here.
Details are on pages 8-14.
CO MPO NENT VIDEO O UT Jacks
Connect optional component video
cables here and to the component
Video In jacks of a television. Details
are on page 13.
AUDIO IN Jacks
Connect audio cables coming from the audio
out jacks of a camcorder, another VCR, or an
audio source here. Details are on page 40.
CO AXIAL Jack
Connect an optional coaxial
digital audio cable here and to
the Coaxial Digital Audio In
jack of a decoder or amplifier.
Details are on page 14.
DVD/VCR AUDIO O UT Jacks
Connect the supplied audio cables
here and to the Audio In jacks of a
television or other audio equipment.
Details are on pages 12-14.
DVD/VCR
OUT
COMPONENT
VIDEO OUT
IN
ANT-IN
Y
DIGITAL AUDIO OUT
DVD/VCR
L
S-VIDEO
OUT
PCM
/
BITSTREAM
AUDIO OUT
AUDIO
R
COAXIAL OPTICAL
Cb
Cr
L
ANT-OUT
R
VIDEO
CH3 CH4
O PTICAL Jack
AC Power
Cord
Connect to a
standard AC out-
let to supply
power to the
DVD/VCR.
Connect an optional
audio optical cable here
and to the Optical
Digital Audio In jack of a
decoder or amplifier.
Details are on page 14.
When the OPTICAL jack
is not in use, make sure
its protective cap is in
place.
DVD/VCR
VIDEO O UT Jack
Connect the yellow video cable
(supplied) here and to the TV’s
Video In jack. Details are on
pages 12 and 14.
VIDEO IN Jack
Connect a cable coming from the video out jack
of a camcorder, another VCR, or an audio-visual
source (laser disc player, video disc player, etc.)
here. Details are on page 40.
S-VIDEO O UT Jack
CH3/CH4 Switch
Set to channel 3 or 4 to use your TV with your
DVD/VCR. Details are on pages 8-11.
Connect an optional S-Video cable here
and to the S-Video In jack of a televi-
sion. Details are on pages 12 and 14.
ANT-O UT (Antenna O ut) Jack
Use the supplied RF coaxial cable to connect this jack to
the ANTENNA IN Jack on your TV, Cable Box, or
Direct Broadcast System. Details are on pages 8-11.
Helpful Hints
• You only need one audio connection and one video connection, so you will not have a cable connected to every
jack. For example, if you are using the S-VIDEO OUT jack, you will not use the yellow VIDEO OUT jack or the
COMPONENT VIDEO OUT jacks.
• The S-VIDEO OUT jack, COAXIAL jack, OPTICAL jack,and COMPONENT VIDEO OUT jacks are only useful in
DVD mode.
• When you use the DVD/VCR AUDIO and VIDEO OUT jacks, press the DVD/VCR OUTPUT button on the
remote control to select VCR mode or DVD mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Remote Control Buttons
DVD/VCR O UTPUT Button
Press to select DVD mode or VCR mode. The DVD light will appear
on the front of the DVD/VCR when it is in DVD mode. The VCR
light will appear on the front of the DVD/VCR when it is in VCR
mode. For video tape playback, also make sure the VCR/TV light is on.
Details are on page 32.
PO W ER Button
Press to turn the power on and off. “HELLO” appears briefly on the
display panel as the DVD/VCR turns on. “BYE” appears briefly as the
DVD/VCR turns off. Details are on page24.
POWER
TIMER SET
DVD/VCR
OUTPUT
DVD Button
Press before using the remote control for DVD features.
VCR/TV
MEMORY
VCR
DVD
REW (ind) Button
DVD m ode ●
Press to view the picture in fast reverse motion (DVD) or to reverse
playback of an Audio CD. Details are on page 54.
VCR m ode ●
PLAY
STOP
REW
F.FWD
When tape playback is stopped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stays on
the screen. Details are on page 44. Press to return to a previous menu.
PAUSE
STO P Button
In DVD mode, press to stop Disc playback. In VCR mode, press to stop
tape playback or recording, or press to select an item in the VCR menu.
1
4
2
5
8
3
6
9
SLOW
7
A
B
SPEED
+10
SEARCH MODE/TIME SEARCH Button
DVD m ode ●
Press to access or remove the SEARCH menu, which allows you to go
directly to a specific Title/Chapter/Track/Time. Details are on pages 55-57.
VCR m ode ●
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
Press to fast forward or rewind the tape a specific length of time.
Details are on page 43.
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
SETUP Button
When Disc playback is stopped, press to access or remove the DVD
player’s SETUP menu. Details are on pages 66-74.
RETURN Button
Press to return to the previous DVD SETUP menu or to remove the
SETUP menu from the TV screen.
TITLE Button
Press to display the Title menu of the Disc, if available. Details are on
page 51.
Helpful Hints
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control
before pressing other DVD buttons. DVD operation buttons are labelled in blue or white. Make sure the DVD/VCR is
in DVD mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the
DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before
pressing other VCR buttons. VCR operation buttons are labelled in orange or white. Make sure the DVD/VCR is in
VCR mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Buttons (cont’d) 29
MEMO RY Button
Press to memorize a tape position at which the real-time counter was
set to 0:00:00. Details are on page 42.
TIMER SET Button
Press to put the DVD/VCR in standby mode so a timer recording can
occur. Details are on pages 36-38.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
VCR/TV Button
Use to select the signal that your TV receives.
DVD
VCR Position (VCR or DVD m ode) ●
When the green VCR light appears on the front of the DVD/VCR, use
the VCR to watch a tape, to watch a TV program while recording it, or
to watch a TV broadcast using the CHANNEL o/p or Number but-
tons to change channels at the DVD/VCR.
PLAY
STOP
REW
F.FWD
When the red DVD light appears on the front of the DVD/VCR, use the
DVD Player to view Disc playback or menus.
If the VCR/TV light appears on the front of the DVD/VCR, it is in VCR
position (in either VCR or DVD mode).
PAUSE
1
4
2
5
8
3
6
9
TV Position ●
Use to watch TV (changing channels at the TV) or to watch one program
while recording another. Details are on page 34. If the VCR/TV light does-
n’t appear on the front of the DVD/VCR, it is in TV position.
SLOW
7
A
B
SPEED
+10
A-B REPEAT Button
Press to set up A-B Repeat Play, which repeatedly plays a specific seg-
ment of a Disc. Details are on page 59.
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
MENU Button
DVD m ode ●
SETUP
MODE AUDIO
SUB TITLE
Press to display the menu of the Disc. Details are on pages five and 51.
VCR m ode ●
Press to access the VCR menu.
ENTER Button
Press to select a setting in the DVD Player menu or to select a
feature in the Disc menu.
SUBTITLE Button
During disc playback, press to access the subtitle menu of the
Disc, then press the o/p buttons to select a language for the
subtitles (among those available) or to turn off the subtitles. Details
are on page 63.
REPEAT Button
Press to repeat playback of the current Disc or Track (Audio CD) or
a Title or Chapter (DVD). Details are on page 58.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 Remote Control Buttons (cont’d)
SLO W Button
During tape playback, press to view the picture in slow motion.
Press again to resume normal playback. Details are on page 44.
PAUSE Button
DVD m ode ●
Press to pause Disc playback. Details are on page 52. Press repeatedly
to advance the DVD picture step by step (or one frame at a time).
Details are on page 53.
POWER
TIMER SET
VCR m ode ●
While recording, press to temporarily stop the recording (pause).
Press a second time to resume normal recording. Details are on page
33. You can not pause a One-Touch Recording. Or, press during tape
playback to freeze the picture. Press again to resume playback.
Details are on page 44.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
PLAY
STOP
SKIP/CHANNEL Buttons
DVD m ode ●
Press to skip Chapters or Tracks. Details are on page 55.
VCR m ode ●
REW
F.FWD
Press to change channels at the DVD/VCR.
Num ber Buttons
DVD m ode ●
Press to directly select a Track (Audio CD) or a Chapter or Title
(DVD) for playback. Details are on pages 55-56.
PAUSE
1
4
2
5
8
3
6
9
Press to program Tracks (Audio CD) for playback. Details are on page 60.
VCR m ode ●
SLOW
Use to set up VCR features (such as the clock). Press to select TV channels
at the DVD/VCR. Cable Users: Enter channel numbers as a two-digit
number for the quickest results. For example, to select channel 6, press 0,6.
If you only press the Number 6 button, channel 6 will be selected after a
brief delay. (There also may be a brief delay when you select channels 10,
11, and 12.) If you want to select channels 100 and above, enter channel
numbers as a three-digit number. For example, to select channel 117, press
number buttons 1, 1, 7. Antenna Users: Enter channel numbers as a two-
digit number for the quickest results. For example, to select channel 5, press
0,5. If you only press the Number 5 button, channel 5 will be selected after
a brief delay. You may only select channels 2-69.
7
A
B
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
DISPLAY/STATUS/EXIT Button
DVD m ode ●
Press to display information about the disc. Details are on page 65.
VCR m ode ●
Press to access or remove the VCR’s on-screen status display. Details
are on page 23. Press to exit on-screen VCR menus.
MO DE Button
Press to set up programmed or random playback for an Audio CD.
Details are on pages 60-61.
CLEAR Button
DVD m ode ●
Press to remove Track numbers from a Program. Details are on page 60.
VCR m ode ●
Press to erase incorrect data when programming VCR functions.
Also, press to reset the real-time counter. Details are on page 42.
Helpful Hints
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control
before pressing other DVD buttons. DVD operation buttons are labelled in blue or white. Make sure the DVD/VCR is in
DVD mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before
pressing other VCR buttons. VCR operation buttons are labelled in orange or white. Make sure the DVD/VCR is in VCR
mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Buttons (cont’d) 31
VCR Button
Press before using the remote control for VCR features.
PLAY Button
Press to begin Disc or tape playback. Press to select an item in the VCR
menu.
POWER
TIMER SET
F.FW D (Fast Forward) Button
DVD m ode ●
Press to fast forward the Disc. Details are on page 54.
Press the PAUSE button, then press the F.FWD button to begin slow
motion playback. Press the F.FWD button repeatedly to change the
forward speed of slow motion. Details are on page 53.
VCR m ode ●
When playback is stopped, press to fast forward the tape at high
speed. During playback, press to fast forward the tape while the
picture stays on the screen. Details are on page 44. Press to advance
to the next VCR menu or to change the setting of an item in the VCR
menu.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
PLAY
STOP
REW
F.FWD
PAUSE
1
4
2
5
8
3
6
9
RECO RD Button
Press once to start a recording. Details are on page 33. Or, press
repeatedly to start a One-Touch Recording. Details are on page 35.
SLOW
7
A
B
SPEED
+10
0
DISPLAY
SPEED Button
Press to select the recording speed (SP or SLP). Details are on
pages 38 and 82.
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
ARROW Buttons
RETURN
ANGLE
Press to select an item in the DVD player menu or in the Disc menu.
SETUP
MODE AUDIO
SUB TITLE
AUDIO Button
Press the AUDIO button, then press the o /p buttons to choose
one of the audio languages or sound modes available on the Disc.
Details are on page 62.
ANGLE Button
Press to view the picture from a different angle (if available). Press the
ANGLE button, then press the o /p buttons to choose one of the
available angles. Details are on page 64.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Playing a Video Cassette Tape
Turn on the TV.
VCR
1
2
Read and follow the steps below to play a tape.
Insert a tape in the
DVD/VCR.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the DVD/VCR is set
to. Or, if you connected the DVD/VCR to the TV using audio and
video cables, select the correct audio and video in channel at the
TV. Details are on page 12.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
3
4
PLAY
STOP
REW
F.FWD
2
Insert a tape in the cassette com partm ent of the
DVD/VCR. The POWER,VCR, VCR/TV and CST. IN lights will
appear on the front of the DVD/VCR. If the tape’s record tab has
been removed, playback will start automatically.
5
PAUSE
1
4
2
5
8
3
6
9
SLOW
3
7
A
B
SPEED
+10
If playback does not start autom atically, press the VCR
button, then press the PLAY button.
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
4
RETURN
ANGLE
Press the STO P button to stop playback.
SETUP
MODE AUDIO
SUB TITLE
5
Press the REW (ind) button to rewind the tape.
6
Helpful Hints
After the tape stops, press the STO P/EJECT button on
the DVD/VCR to rem ove the tape.
•
If the tape you want to play is
already in the DVD/VCR, make sure
the DVD/VCR power is on and the
DVD/VCR is in VCR mode and VCR
position. (The VCR light and the
VCR/TV light will appear on the front
of the DVD/VCR.) Then press the
PLAY button.
S-VHS Q uasi Play Back (SQ PB)
This unit allows you to view a tape recorded in S-VHS format. A
tape recorded in S-VHS format will play the same as a tape record-
ed in normal format. This unit detects whether the tape is record-
ed in S-VHS format or in normal format.
• Other tape playback options and
features are on pages 41-48.
• When you play a tape recorded in
S-VHS format on this unit, you can
not get the high resolution that
would be available on an S-VHS
VCR. Noise lines (black and white
streaks) may appear on the picture.
• If REPEAT PLAY is set to ON, play-
back will begin automatically, even
when the record tab is intact.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a Video Cassette Tape 33
VCR
Turn on the TV.
1
2
Read and follow the steps below to record a television program
onto a video cassette tape. Before you begin, make sure the
DVD/VCR is in VCR mode. Press the DVD/VCR OUTPUT button
so that the green VCR light appears on the front of the
DVD/VCR.
Insert a tape in the
DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
1
VCR/TV
MEMORY
VCR
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the DVD/VCR is set
to. Or, if you connected the DVD/VCR to the TV using audio and
video cables, select the correct audio and video in channel at the
TV. Details are on page 12.
DVD
3
5
4
PLAY
STOP
8
REW
F.FWD
6
2
PAUSE
1
4
2
5
8
3
6
9
Insert a tape with its record tab intact into the cassette
com partm ent of the DVD/VCR. If tape playback begins, press
the STOP button.
7
SLOW
7
A
B
SPEED
+10
0
3
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
If the VCR/TV light appears on the front of the DVD/VCR, go to
step 4. If the VCR/TV light does not appear, press the VCR
button, then press the VCR/TV button once.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
4
Press the SPEED button until the desired tape speed
appears briefly on the screen. (Details about tape speed are on
page 38.)
5
Use the CHANNEL o/p buttons or the Num ber buttons
to select the TV channel to be recorded.
Helpful Hints
• If you press the RECORD button
when there is not a tape in the
DVD/VCR, NO CASSETTE will flash
on the screen.
• If you press the RECORD button
while a tape without a record tab is
in the DVD/VCR, the DVD/VCR will
eject the tape and PROTECTED
CASSETTE CANNOT RECORD will
flash on the screen.
6
Press the RECO RD button once to start recording. The
RECORD light will appear.
7
To pause the recording, press the PAUSE button once.
The RECORD light will flash. To resum e recording, press the
RECO RD button or press the PAUSE button again. The
RECORD light will come on again.
• Other recording options are on
pages 34-40.
• You can change the tape speed dur-
ing a recording, but some distortion
will appear on the tape.
• The DVD/VCR will record in a pre-
set volume.
8
To stop recording, press the STO P button.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Recording One Channel/Watching Another
VCR
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
2&5
POWER
TIMER SET
1
Press the VCR button, then press the RECO RD button to
start a recording of the current TV channel. Details are on
page 33.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
PLAY
STOP
REW
F.FWD
2
Press the VCR/TV button to put the DVD/VCR in TV
position. The VCR/TV light will disappear from the front of the
DVD/VCR.
6
1
PAUSE
1
4
7
2
5
8
3
6
9
3
SLOW
A
B
Use the TV rem ote control to select the channel you
want to watch at the TV.
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
4
RETURN
ANGLE
To return to the channel being recorded, use the TV
rem ote control to select channel 03 or 04 at the TV (the
channel to which the CH3/CH4 switch on the back of the
DVD/VCR is set). Or, if you connected the DVD/VCR to the TV
using audio and video cables, select the correct audio and video in
channel at the TV. Details are on page 12.
SETUP
MODE AUDIO
SUB TITLE
5
Select the channel you want to
watch at the TV.
Press the VCR/TV button on the DVD/VCR rem ote con-
trol to put the DVD/VCR in VCR position. The VCR/TV light
will appear on the front of the DVD/VCR. The channel being
recorded will appear on the TV screen.
3
4
Select channel 03 or 04 at the
TV.
6
Press the STO P button to stop the recording.
Helpful Hint
• If you use a Cable Box or Direct
Broadcast System hookup, you
may not be able to watch one
channel while recording another.
See pages 10-11 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Recording 35
VCR
The One-Touch Recording (OTR) feature allows you to set an
immediate timed recording 30 minutes to eight hours long. Before
you begin:
POWER
TIMER SET
● Set up the TV channels at the DVD/VCR. Details are on page 17.
● Select a recording speed (SP, SLP) with the SPEED button.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough to
record the program(s).
● If the end of a tape is reached during an OTR, the DVD/VCR will
eject the tape. The DVD/VCR will switch to DVD mode immedi-
ately, and the TIMER SET light will blink. To let the OTR continue,
insert another tape in the DVD/VCR.
To return to VCR mode, press the TIMER SET button on the
front of the DVD/VCR, then press the DVD/VCR OUTPUT but-
ton so that the green VCR light appears on the front of the
DVD/VCR.
● Place the DVD/VCR in VCR mode. Press the DVD/VCR OUT-
PUT button so that the green VCR light appears on the front of
the DVD/VCR.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
3
1
1
2
PLAY
STOP
REW
F.FWD
PAUSE
1
4
2
5
8
3
6
9
SLOW
7
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
● Place the DVD/VCR in VCR position. Press the VCR/TV button so
that the VCR/TV light appears on the front of the DVD/VCR.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
1
SETUP
MODE AUDIO
SUB TITLE
Press the VCR button, then press the CHANNEL o/p but-
tons or the Num ber buttons to select the channel you want
to record.
2
Press the RECORD button repeatedly until the desired
recording length (30 m inutes to eight hours) appears on the
screen. Recording will begin immediately. The RECORD light and
the TIMER SET light will appear on the front of the DVD/VCR.
Helpful Hints
• To check the time remaining for an
OTR after the OTR has been set,
press the DISPLAY/STATUS/EXIT but-
ton.
OTR (0:30)
CH12
• To change the recording length while
an OTR is in progress, press the
RECORD button until the desired
length appears on the screen.
• If you begin an OTR when another
recording is paused, the OTR will
begin.
• You can not pause an OTR.
• If the preset time for a timer record-
ing comes up during an OTR, the
OTR has priority. A message will
remind you when the timer recording
was scheduled to begin. You may let
the OTR continue; the timer recording
will not take place. Or, stop the OTR
and press the TIMER SET button
immediately. The timer recording will
take place if you press the TIMER
SET button before the timer record-
ing’s scheduled start time.
3
To stop an OTR before recording is finished, press the
STOP button.
To cancel the OTR but continue recording, press the RECORD but-
ton repeatedly until REC appears in the upper left corner of the TV
screen. (STATUS must be set to ON. See page 23 for details.) The
RECORD light will remain on the front of the DVD/VCR, but the
TIMER SET light will disappear.
W hen the OTR finishes, if no timer recordings are set, the
TIMER SET light will blink. The DVD/VCR power will turn off auto-
matically. When the power is turned on again, the DVD/VCR will be
in DVD mode. To return to VCR mode, press the TIMER SET but-
ton, then press the DVD/VCR OUTPUT button so that the VCR
light appears on the front of the DVD/VCR. (The TIMER SET light
will disappear.)
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Timer Recording
VCR
Follow the steps below to program your DVD/VCR to record TV
programs while you’re away from home. The DVD/VCR will turn
itself on, record, and turn itself off automatically. Before you begin:
● Set up the TV channels at the DVD/VCR.Details are on page 17.
● Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the TV screen briefly, followed by the VCR menu.
Follow the directions on page 20 to set the VCR’s clock.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
● Press the DVD/VCR OUTPUT button so that the VCR light
appears on the front of the DVD/VCR.
● Press the VCR/TV button so that the VCR/TV light appears on
the front of the DVD/VCR.
2-3
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
1
1
PLAY
STOP
REW
F.FWD
PAUSE
Do each step within 60 seconds of the previous step.
1
4
7
2
5
8
3
6
9
SLOW
1
A
B
Press the VCR button, then press the MENU button.
SPEED
+10
0
SELECT op CHOOSE
B
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
TO END PUSH EXIT
SETUP
MODE AUDIO
SUB TITLE
2
Press the PLAY button or the STO P button to select
PRO GRAM, then press the F.FW D button.
SELECT op CHOOSE
B
→ ONCE
DAILY
WEEKLY
PROGRAM REVIEW
TO END PUSH EXIT
3
Press the PLAY button or the STO P button to select a
O NCE, DAILY, or W EEKLY recording. Then, press the
F.FW D button.
● O NCE: The DVD/VCR will record a TV program on any day
you choose, up to 12 months away.
● DAILY: The DVD/VCR will record the same channel every day
from Monday to Friday – starting at the same time and recording
for the same length of time.
Helpful Hint
● W EEKLY: The DVD/VCR will record the same channel on the
same day, at the same time, and for the same length of time
• If you need to make a correction
while programming a timer record-
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter
the correct information.
every week.
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
Daily
Recording
(exam ple)
SELECT PROGRAM NUMBER
TO END PUSH EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording (cont’d) 37
4
Use the Num ber buttons (1-8) to select a slot in which to
store the tim er recording. There are eight slots. Numbers for
open slots will flash on the screen.
4-7
NOTE: If you enter a number for a slot that has already been used to store
a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen
briefly. Information about the program in that slot will appear on the screen.
If this happens, press the DISPLAY/STATUS/EXIT button, then select another
number.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
PLAY
STOP
REW
F.FWD
5
Use the Num ber buttons to enter the TV channel you want
to record.
● Cable Users, enter channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press 0,6. If you
only press the Number 6 button, channel 6 will be selected after a
brief delay. There also may be a brief delay when you select channels
10, 11, and 12. If you want to select channels 100 and above, enter
channel numbers as a three-digit number. For example, to select
channel 117, press 1, 1, 7.
PAUSE
1
4
2
5
8
3
6
9
SLOW
7
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
● Antenna Users, enter channel numbers as a two-digit number for
the quickest results. For example, to select channel 5, press 0,5. If
you only press the Number 5 button, channel 5 will be selected
after a brief delay. You may only select channels 2-69.
● If you are recording from line input, press 0,0 to select AV REAR.
● If you are using a Cable Box/DBS, select the Cable Box/DBS out-
put channel (03 or 04). Set the Cable Box/DBS to the channel you
want to record. Leave the Cable Box/DBS on for the timer
recording. Details are on page 10.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
6
Press two Num ber buttons for the hour you want the
recording to begin. Press two Num ber buttons for the
m inute you want the recording to begin. Press 1 for AM or
2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
1
10
– – : – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
7
Helpful Hints
Follow the instructions in step 6 to enter the recording’s
stop tim e. (AM or PM will be set automatically.)
• Entries that do not match the
DVD/VCR’s clock or calendar will
cause a question mark to appear
on the screen.
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
1
10
09:30 PM
– – : – –
TIME OFF
• If you are recording from line input,
connect the audio and video cables
to the AUDIO IN and VIDEO IN
jacks on the back of the DVD/VCR.
(Please see illustration on page 40.)
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Instructions continue on page 38.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Timer Recording (cont’d)
8
Press the Num ber 1 button to record in SP speed or the
Num ber 2 button to record in SLP speed. (See the chart
below.) You cannot use the SPEED button at this time.
11
POWER
TIMER SET
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
TIME OFF
REC SPEED
SP=1 SLP=2
1
10
09:30 PM
11:00 PM
SLP
DVD/VCR
OUTPUT
VCR/TV
MEMORY
DVD
VCR
PLAY
STOP
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
REW
F.FWD
9
PAUSE
Press two Num ber buttons for the m onth and two
Num ber buttons for the day you want to record the pro-
gram . For example, for July 10, 2000, press 07, 10. The day of
the week and the year will appear automatically (you cannot pro-
gram the DVD/VCR to record more than one year in advance).
1
4
2
5
8
3
6
9
8
9
10
SLOW
7
A
B
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
TIME OFF
REC SPEED
START DATE
1
10
REPEAT
TITLE
STATUS/EXIT
09:30 PM
11:00 PM
SLP
07/10/00
MON.
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
10
Press the DISPLAY/STATUS/EXIT button. PROGRAM
WAS COMPLETED/PLEASE PUSH TIMER-SET FOR TIMER
RECORDING will appear on the screen briefly. (If PROGRAM
NOT COMPLETED appears, try again from step 1.)
Press the TIMER
SET button to
place the
11
Press the TIMER SET button. The TIMER SET light will appear
on the front of the DVD/VCR. The DVD/VCR will be in standby
mode. If you turn on the DVD/VCR power, the DVD/VCR is in
DVD mode. You can use the DVD features.
DVD/VCR in
standby m ode.
Insert a tape in
the DVD/VCR.
Leave the Cable
Box/DBS on
If the timer recording will take place several hours or days from
now, you may use the DVD/VCR until time for the recording. Press
the TIMER SET button to place the DVD/VCR in standby mode a
few minutes before the recording starts.
If you forget to place the DVD/VCR in standby mode, PLEASE PUSH
TIMER-SET FOR TIMER RECORDING flashes on your TV screen
two minutes before a timer recording starts. Press the CLEAR but-
ton to remove the message. Then press the TIMER SET button.
(if applicable).
Cassette type/Playback Time
Tape Speeds
Tape Speed
SP (standard play)
T160
2 hrs.
40 mins.
5 hrs.
20 mins.
T120
T60
This chart shows the recording/playback time
for three types of video cassettes (T160, T120,
and T60). There are three playback speeds: SP,
LP, and SLP. When recording, you can change
the tape speed (SP or SLP) using the SPEED
button. You cannot record in LP speed.
2 hrs.
1 hr.
LP (long play)
(playback only)
4 hrs.
6 hrs.
2 hrs.
3 hrs.
SLP (super long play) 8 hrs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording (cont’d) 39
Checking or Cancelling Tim er Recordings
● Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the VCR light
appears on the front of the DVD/VCR.
2-4
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
1
With the DVD/VCR on and in VCR mode and in VCR position
(press the VCR/TV button so that the VCR/TV light appears on
the front of the DVD/VCR), press the VCR button, then
press the MENU button.
1
1
PLAY
STOP
REW
F.FWD
PAUSE
1
4
2
5
8
3
6
9
2
Press the PLAY button or the STO P button to select
PRO GRAM, then press the F.FW D button.
SLOW
7
A
B
SPEED
+10
5
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
3
Press the PLAY button or the STO P button to select
PRO GRAM REVIEW , then press the F.FW D button. The
timer recording information for the program in the lowest num-
bered slot will appear on the screen. If no timer recordings are
set, nothing will happen when you press the F.FWD button.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
Helpful Hints
4
• CLASH may flash on the screen when
you finish setting a timer recording.
This means that the timer recording
you just programmed and another
timer recording overlap. The current
timer recording will not take place.
You may choose to cancel the over-
lapping timer recording.
Press the F.FW D button repeatedly to review all pro-
gram m ed tim er recordings. If you don’t press the F.FWD but-
ton within 10 seconds, the DVD/VCR will automatically display
information about the next programmed timer recording. This will
continue until all timer recordings have been displayed. Then the
menu will disappear.
• To stop a started timer recording,
press the STOP/EJECT button or the
TIMER SET button on the front of the
DVD/VCR.
• If the power fails for more than one
minute, programmed timer recordings
will be lost. If this occurs, repeat the
steps on pages 16 and 20 before
resetting the timer recordings.
5
To cancel the tim er recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
• If the preset time for a timer record-
ing comes up during an OTR, the
OTR has priority. A message will
remind you when the timer recording
was scheduled to begin. You may let
the OTR continue; the timer recording
will not take place. Or, stop the OTR
and press the TIMER SET button
immediately. The timer recording will
take place if you press the TIMER
SET button before the timer record-
ing’s scheduled start time.
6
Repeat steps 1-4 to m ake sure you have cleared the cor-
rect tim er recording.
See page 78 for m ore hints.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Rerecording (Tape Duplication)
VCR
The instructions on this page show you how to copy tapes. The illustration uses two DVD/VCRs. Different
VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7.
1. Audio cables from DVD/VCR AUDIO OUT Jacks of
DVD/VCR 1 to AUDIO IN Jacks of DVD/ VCR 2
DVD/VCR 1
Playing unit
DVD/VCR 2
Recording unit
2. Video cable from DVD/VCR VIDEO
OUT Jack of DVD/VCR 1 to VIDEO
IN Jack of DVD/VCR 2
3. RF coaxial cable from the ANT-OUT
(Antenna Out) jack of DVD/VCR 2 to
the TV’s ANTENNA IN Jack
1
Make the connections shown above.
2
DVD/VCR 1 will play your tape. Put a prerecorded tape into
the cassette com partm ent of DVD/VCR 1.
3
Helpful Hints
DVD/VCR 2 will record your tape. Insert a blank tape in the
cassette com partm ent of DVD/VCR 2. The DVD/VCR must be
in VCR mode and VCR position. (The VCR light and the VCR mode
and VCR/TV light will appear on the front of the DVD/VCR.)
• If you use the AUDIO and VIDEO
IN Jacks on the back of DVD/VCR
2, press Number buttons 0, 0, 1 at
step 5. AV REAR will appear on the
TV screen.
• If you use the AUDIO and VIDEO In
Jacks on the front of DVD/VCR 2,
press Number buttons 0, 0, 2 at
step 5. AV FRONT will appear on
the TV screen.
4
Turn on the TV and set it to channel 03 or 04, whichever
channel the CH3/CH4 switch on DVD/VCR 2 is set to.
• Unauthorized recording of copyright-
ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
5
Point the rem ote control at DVD/VCR 2. Press the VCR
button, then press the Num ber buttons 0, 0, 1 or 0, 0, 2.
(See Helpful Hints at right.)
• If a program has copyright protec-
tion, it may not record clearly.
• These instructions show you how to
copy tapes using two DVD/VCRs
like yours. Different VCRs may oper-
ate differently.
• You cannot record DVD material
onto a video cassette tape using a
single unit.
6
7
Press the SPEED button to select SP or SLP at DVD/VCR 2.
Press the VCR PLAY button on DVD/VCR 1 and the
RECO RD button on DVD/VCR 2 at the sam e tim e.
To stop recording, press the STOP/EJECT button on DVD/VCR 1,
then press the STOP/EJECT button on DVD/VCR 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play (Video Cassette Tapes) 41
VCR
● Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the green VCR
light appears on the front of the DVD/VCR.
1
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
1
DVD
Press the VCR button, then press the MENU button.
PLAY
STOP
SELECT op CHOOSE
B
REW
F.FWD
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
2-4
PAUSE
TO END PUSH EXIT
1
4
2
5
8
3
6
9
SLOW
2
7
A
B
SPEED
+10
Press the PLAY button or the STO P button to select
VCR SET UP, then press the F.FW D button.
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
SELECT op CHOOSE
B
5
1
MENU
ENTER
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
OFF
RETURN
ANGLE
LANGUAGE
BLUE BACKGROUND ON
SETUP
MODE AUDIO
SUB TITLE
TO END PUSH EXIT
3
Press the PLAY button or the STO P button to select
REPEAT PLAY.
4
Press the F.FW D button so that O N appears beside
REPEAT PLAY.
SELECT op CHOOSE
B
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
ON
LANGUAGE
BLUE BACKGROUND ON
TO END PUSH EXIT
Helpful Hints
5
• To cancel Repeat Play, follow steps
1-3 above. At step 4, press the
F.FWD button so that OFF appears
beside REPEAT PLAY. Press the DIS-
PLAY/STATUS/EXIT button.
Press the DISPLAY/STATUS/EXIT button. Now, when a
tape has finished playing, the DVD/VCR will rewind it and start
playback again.
• The real-time counter memory does
not function during Repeat Play.
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Real-Time Counter Memory
VCR
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
● Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the green VCR
light appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
4
5
DVD
1
PLAY
STOP
Press the VCR button, then play, fast forward, or rewind
a tape to the location that you would like to refer to
later. Press the STO P button to stop the tape.
REW
F.FWD
1
2
2
PAUSE
1
4
2
5
8
3
6
9
Press the DISPLAY/STATUS/EXIT button to see the sta-
tus display.
SLOW
STOP
TV STEREO
1:08PM
CH10
7
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
SLP
1 : 23 : 45
HIFI
MENU
ENTER
3
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
3
W hile the status display is on the screen, press the
CLEAR button to reset the real-tim e counter to zero.
STOP
TV STEREO
1:08 PM
CH10
SLP
0 : 00 : 00
HIFI
4
W hile the real-tim e counter is on the screen, press the
MEMO RY button so that M appears beside the counter.
STOP
1:08 PM
CH10
TV STEREO
Helpful Hints
• The MEMORY button does not
function if REPEAT PLAY is set to
ON. Details are on page 41.
SLP
M
0 : 00 : 00
HIFI
• To erase a real-time counter memo-
ry, press the MEMORY button until
the M disappears from the screen.
• You may only set the real-time
counter to zero at one location at a
time. If you set the real-time counter
to zero at a second location, the
previous real-time counter to zero
setting will be erased.
5
To go to a tape location where the real-tim e counter was
reset to zero, press the REW (ind) button or the F.FW D
button when playback is stopped.
When the tape reaches the point at which the counter was set to
zero, the tape will stop.
Press the PLAY button to watch the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Search 43
VCR
Follow the steps below to program the DVD/VCR to search for-
ward or backward on a tape a specific length of time. There must
be a tape in the DVD/VCR.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
DVD
MEMORY
VCR
1
PLAY
STOP
1
REW
F.FWD
3
2
1
Press the VCR button, then press the SEARCH
MO DE/TIME SEARCH button.
TIME SEARCH
PAUSE
0:00
1
4
7
2
5
8
3
6
9
SLOW
A
B
ENTER SEARCH TIME
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
2
MENU
ENTER
W ithin 10 seconds, use the Num ber buttons to enter the
desired length of tim e you want to skip forward or back-
ward. For example, for 1 hour, 25 minutes, press Number but-
tons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
3
W ithin 10 seconds, press the F.FW D button or the
REW (ind) button. The DVD/VCR will skip over the specified
length of time, then begin playback.
Helpful Hints
• If you want to search for more than
59 minutes, you must enter the
length of time in hours and minutes.
For example, to search forward 70
minutes, press 1,1,0 at step 2.
• You can not do a Time Search while
recording.
• To remove the Time Search display,
press the SEARCH MODE/TIME
SEARCH button again.
• To cancel a Time Search that is in
progress, press the STOP button.
• If the end of the tape is reached
during a Time Search, the Time
Search will be cancelled. The
DVD/VCR may rewind the tape.
Details are on page 45.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Special Effects Playback
VCR
Before trying the features on this page, make sure the DVD/VCR
is in VCR mode.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
Forward and Reverse Searching (SP/LP/SLP)
PLAY
STOP
REW
F.FWD
1
During tape playback, press and release the F.FW D but-
ton or the REW (ind) button. A fast forward or reverse pic-
ture search will begin.
PAUSE
1
4
2
5
8
3
6
9
2
SLOW
To return to playback, press the PLAY button.
7
A
B
SPEED
+10
Super High Speed Searching (LP/SLP)
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
1
RETURN
ANGLE
During tape playback, press the F.FW D button or the
REW (ind) button, then press again. The DVD/VCR will now
search in super high speed.
SETUP
MODE AUDIO
SUB TITLE
2
To return to norm al playback, press the PLAY button.
Viewing a Still Picture
1
During tape playback, press the PAUSE button. A still pic-
ture will appear on the screen.
2
To release the still picture and return to playback, press
the PLAY button or press the PAUSE button again.
Helpful Hints
• Slow and Still modes will automati-
cally switch to Stop mode after five
minutes to protect the DVD/VCR
and the tape from damage.
• SP/LP/SLP means this feature will
work with tapes recorded in
Standard Play, Long Play, or Super
Long Play.
Viewing a Slow Motion Picture
1
During tape playback, press the SLO W button. The tape
will play in slow motion.
• LP/SLP means this feature will
work with tapes recorded in Long
Play or Super Long Play. For details
about tape speed, see pages 38
and 82.
2
To release Slow m ode and return to norm al playback,
press the PLAY button or press the SLO W button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Operation Features 45
VCR
The following tape playback features are available in VCR mode.
Autom atic Playback
When you put a tape in the DVD/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will begin.
If a timer recording is set, and the TIMER SET light is flashing, the
power will not come on automatically when you insert a tape with
the record tab intact.
If a timer recording is set and the TIMER SET light is flashing, the
DVD/VCR will eject the tape if the record tab is missing.
Autom atic Rewind, Eject
When a tape is played, fast forwarded, or recorded to its end, the
DVD/VCR will rewind the tape, stop, then eject the tape.
If the real-time counter memory is set, the DVD/VCR will only
rewind the tape to the point at which the counter is set to zero,
then stop. The DVD/VCR will not eject the tape automatically. If
REPEAT PLAY is set to ON, the DVD/VCR will not eject the tape
automatically.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but the
DVD/VCR must be plugged in).
If a timer recording is set, and the TIMER SET light is on or flashing,
the tape cannot be ejected. To eject the tape, you must first press
the TIMER SET button to cancel the timer recording, then press the
STOP/EJECT button to remove the tape.To reset the timer record-
ing, insert a tape, then press the TIMER SET button to put the
DVD/VCR in standby mode for the timer recording.
Autom atic Tracking Adjustm ent
The DVD/VCR adjusts tracking automatically to give you the best
possible picture quality. With some recordings, however, you may
get a better picture using the manual tracking controls (see below).
Manual Tracking
To manually adjust the tracking during normal playback and slow
motion playback, press the CHANNEL o/p buttons on the
DVD/VCR. (The CHANNEL o/p buttons on the remote control
will not adjust tracking.)
Tracking will return to Automatic Tracking Adjustment when you
press the STOP button or insert a tape.
You cannot manually adjust the tracking of a Still picture. However,
you may press the CHANNEL o/p buttons on the front of the
DVD/VCR to remove vertical jitter in a Still picture.
Before
After
Tracking
Adjustm ent
Tracking
Adjustm ent
Download from Www.Somanuals.com. All Manuals Search And Download.
46 MTS (Multi-Channel Television Sound) System
VCR
Your DVD/VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear
sound from two sources. Your DVD/VCR also can play tapes recorded in a second audio (usually, that
means your program is recorded in a second language). Of course, your DVD/VCR will play tapes record-
ed in monaural (single-source) sound as well.
Your DVD/VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on
the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with your DVD/VCR’s stereo and second audio
setups. Then follow the directions on page 47 to record in stereo or second audio and the directions on
page 48 to play back tapes recorded in Hi-Fi stereo.
Understanding O n-Screen Displays
When you receive a signal from a channel you’re watching, portions of the on-screen display shown below
will appear when you press the DISPLAY/STATUS/EXIT button on the remote control.
The indication 2ND AUD or TV
STEREO that appears on this side of
the status display tells you if your
DVD/VCR is programmed to receive a
second audio or stereo broadcast (it
cannot be programmed to receive
both at the same time).
The indication 2ND AUD or STEREO
that appears on this side of the status
display tells you if the program you’re
watching is available in second audio
or stereo.
STOP
TV STEREO
12:00 AM
CH 02
STEREO
2ND AUD
This indication is not available during
tape playback.
SLP
1:23:45
HIFI
Specifically…
When a program broadcast in stereo is available, STEREO appears here.
STOP
TV STEREO
12:00 AM
CH 02
STEREO
2ND AUD
When a program broadcast in second audio is available, 2ND AUD
appears here.
When a program is available both in stereo and second audio, both
STEREO and 2ND AUD appear here. Even though a program is avail-
able in stereo or second audio, you still must program the DVD/VCR to
receive or record the program. Follow the directions on page 47.
NOTE: Although a program may be broadcast in both stereo and second
audio, you cannot record in both stereo and second audio at the same time.
SLP
1:23:45
HIFI
To record and play back programs broadcast in stereo, even if you have a single-speaker TV, just use one
of the connections shown, then follow the steps on pages 47-48.
Monitor
TV
Stereo
Speaker TV
Single
Speaker TV
Stereo Amplifier
or Receiver
OR
OR
Monaural Sound
R
L
RF coaxial cable (supplied) from DVD/VCR’s
ANT-O UT (Antenna O ut) jack to TV’s
ANTENNA IN Jack
Audio cables from
DVD/VCR AUDIO O UT
Jacks of DVD/VCR to
AUDIO IN Jacks of Stereo
Am plifier or Receiver
Video cable from DVD/VCR VIDEO O UT Jack of
DVD/VCR to VIDEO IN Jack of m onitor TV
Download from Www.Somanuals.com. All Manuals Search And Download.
MTS (Multi-Channel Television Sound) System (cont’d) 47
VCR
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
2-3
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
1
DVD
VCR
1
5
Press the VCR button, then press the MENU button.
PLAY
STOP
SELECT op CHOOSE
B
REW
F.FWD
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
6
1
PAUSE
TO END PUSH EXIT
1
4
2
5
8
3
6
9
2
SLOW
7
A
B
Press the PLAY button or the STO P button to select
SPEED
+10
TUNER SET UP, then press the F.FW D button.
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
SELECT op CHOOSE
B
REPEAT
TITLE
STATUS/EXIT
→ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
MENU
ENTER
4
ON
RETURN
ANGLE
2ND AUDIO
SETUP
MODE AUDIO
SUB TITLE
TO END PUSH EXIT
3
Press the PLAY button or the STO P button to select TV
STEREO or 2ND AUDIO . Then, press the F.FW D
button. O N will appear to the right of your selection.
SELECT op CHOOSE
B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
→ 2ND AUDIO
ON
TO END PUSH EXIT
Helpful Hints
4
Press the DISPLAY/STATUS/EXIT button.
• You can only receive and record in
stereo or second audio programs
that are broadcast in stereo or sec-
ond audio. You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. Please see page 46 to deter-
mine if the program you want to
watch/record is being broadcast in
stereo or second audio.
5
To record, select the channel to be recorded using the
CHANNEL o/p buttons, then go to step 6.
6
Press the RECO RD button to start recording.
• If you select second audio when sec-
ond audio is not available, the
DVD/VCR will record normal audio.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Hi-Fi Stereo Sound System
VCR
Multi-Channel Television Sound system broadcasts are automatically
recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the tapes
recorded in Hi-Fi stereo, however, you’ll need to follow steps 1-5.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
2-4
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
DVD
VCR
1
5
PLAY
STOP
REW
F.FWD
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE
B
PAUSE
1
4
2
5
8
3
6
9
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
SLOW
7
A
B
TO END PUSH EXIT
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
2
MENU
ENTER
Press the PLAY button or the STO P button to select VCR
RETURN
ANGLE
1
SET UP, then press the F.FW D button.
SETUP
MODE AUDIO
SUB TITLE
SELECT op CHOOSE
B
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
OFF
LANGUAGE
BLUE BACKGROUND ON
TO END PUSH EXIT
Helpful Hints
3
Press the PLAY button or the STO P button to select
AUDIO O UT, then press the F.FW D button.
• Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to MONO
if you want monaural audio play-
back. To do this, follow steps 1-3. At
step 4, press the PLAY button or the
STOP button to select MONO. Press
the DISPLAY/STATUS/EXIT button.
HIFI will disappear from the status
display.
• All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded in
Hi-Fi stereo.
SELECT op
→ HIFI
MONO
ON
TO END PUSH EXIT
4
Press the PLAY button or the STO P button to select
HIFI. ON will appear to the right of HIFI on the screen.
SELECT op
→ HIFI
MONO
ON
• If you play non-Hi-Fi tapes while the
DVD/VCR is set to HIFI, HIFI will
disappear from the status display
and the tape will play in monaural
sound.
Please see additional notes
on page 79.
TO END PUSH EXIT
5
Press the DISPLAY/STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Blue Background 49
VCR
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON. The screen will be
blue and the sound will be muted.
Or, if you want to receive the weak signal, set BLUE BACK-
GROUND to OFF. When you select a channel that is receiving a
weak signal, you will see and hear the static in the TV program-
ming. The channel number will not appear on the screen when
you select a weak channel.
2-3
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
1
1
To set BLUE BACKGROUND to ON or OFF, follow these steps.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
PLAY
STOP
REW
F.FWD
PAUSE
1
4
2
5
8
3
6
9
1
Press the VCR button, then press the MENU button.
SLOW
7
A
B
SELECT op CHOOSE
B
SPEED
+10
0
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
4
TO END PUSH EXIT
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
2
Press the PLAY button or the STO P button to select
VCR SET UP, then press the F.FW D button.
SELECT op CHOOSE
B
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
OFF
LANGUAGE
BLUE BACKGROUND ON
TO END PUSH EXIT
3
Press the PLAY button or the STO P button to select
BLUE BACKGRO UND. Then, press the F.FW D button
repeatedly so that O FF (or O N) appears beside BLUE
BACKGRO UND.
SELECT op CHOOSE
B
REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
OFF
LANGUAGE
→ BLUE BACKGROUND ON
TO END PUSH EXIT
4
Press the DISPLAY/STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Playing a Disc
DVD
AUDIO CD
Press the OPEN/CLOSE
button on the DVD/VCR.
Playing a DVD or an Audio CD
3
4
Before you begin...
Turn on the power of the TV, amplifier and any other equipment
connected to the DVD/VCR. Make sure the TV and the stereo or
amplifier (if applicable) are set to the correct channel. Details are
on pages 8-14.
Insert a Disc.
POWER
TIMER SET
DVD/VCR
OUTPUT
1
5
VCR/TV
MEMORY
VCR
1
2
6
Press the POW ER button to turn on the DVD/VCR. “HELLO”
will appear briefly on the display panel.
DVD
PLAY
STOP
REW
F.FWD
2
Press the DVD/VCR O UTPUT button so that the red
DVD light appears on the front of the DVD/VCR. Then,
press the DVD button.
PAUSE
1
4
2
5
8
3
6
9
SLOW
3
7
A
B
SPEED
+10
Press the O PEN/CLO SE button on the front of the
DVD/VCR to open the Disc tray.
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
STATUS/EXIT
4
Helpful Hints
Place a Disc into the tray. Make sure the Disc is sitting prop-
erly in the correct recess.
Some DVDs are recorded on both sides. Make sure the side you
want to play is facing up. Or, if the DVD is recorded on only one
side, place the Disc in the tray with the label facing up.
• A “No Feature” symbol
may
appear at the bottom right of the
TV screen. This symbol means either
the feature you tried is not available
on the Disc, or the DVD/VCR can
not access the feature at this time.
This does not indicate a problem
with the DVD/VCR.
• If a Disc is dirty or has scratches,
the pictures may appear distorted
and playback may stop. In such
cases, remove the Disc and turn off
the DVD/VCR. Disconnect the
power cord, then reconnect it. Clean
the Disc, then turn on the DVD/VCR
again and reinsert the Disc for play-
back.
5
Press the PLAY button. The tray will close automatically, and
playback will begin at the first Chapter or Track of the Disc.
Or, you may press the OPEN/CLOSE button to close the tray,
and DVD playback will start automatically. (You also may close the
tray by gently pressing the Disc tray toward the DVD/VCR.)
If the DVD in the tray has a menu, the menu may appear on the
screen instead. Details are on page 51.
With some Audio CDs, playback will not begin unless you press
the PLAY button.
• When the DVD or CD light appears
on the display panel, the Disc is
loaded completely and is ready for
playback.
• When you press the OPEN/CLOSE
button or the DVD PLAY button on
the front of the DVD/VCR when the
power is off, the DVD/VCR will turn
on automatically and will be in DVD
mode.
6
Press the STO P button to stop playback. If disc playback is
stopped for more than one minute, a screen saver will appear.
Details are on page 77.
Remember, this DVD/VCR
will play only certain Discs.
See page six for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Menus 51
DVD
To access the DVD’s Main Menu...
Using the DVD Menus
DVD
VCR
Some DVDs contain menus that describe the contents of the Disc
or allow you to customize Disc playback. For example, the menu
may offer choices for subtitle languages, director’s commentary,
or soundtrack playback.
To use the DVD menu and select playback features, follow these
steps.
1
PLAY
STOP
REW
F.FWD
PAUSE
1
4
2
5
8
0
3
6
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
SLOW
7
9
A
B
SPEED
+10
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
1
MENU
ENTER
1
Press the DVD button, then press the MENU button. The
DVD’s main menu will appear.
RETURN
ANGLE
2
1
SETUP
MODE AUDIO
SUB TITLE
2
Press the arrow buttons ( o /p /s /B ) to select an item ,
then press the ENTER button. Continue this process to set
up all the features you wish to see on the Disc.
To access the DVD’s Title Menu...
DVD
VCR
PLAY
STOP
Using the Title Menu
REW
F.FWD
Some DVDs have a Title Menu, which lists the Titles available on
the Disc. Use the Title Menu to start playback at a specific Title.
Some DVDs may allow you to choose Chapters from the Title
menu.
For example, if a DVD has 10 Titles and you want to go directly
to Title 5, follow these steps.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
PAUSE
1
4
2
5
8
0
3
6
SLOW
7
9
A
B
SPEED
+10
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
1
RETURN
ANGLE
1
2
Press the DVD button, then press the TITLE button. The
SETUP
MODE AUDIO
SUB TITLE
Title Menu will appear.
If a Title menu is not available, the
TV screen.
symbol may appear on the
Helpful Hints
NOTE: If the DVD only has a main menu, the main menu may
appear when you press the TITLE button.
• Menus may vary among Discs.
Refer to the information accompa-
nying the Disc for details.
• Not all DVDs have Title menus.
• Some DVDs may refer to Chapters
as “scenes.” Some DVDs may refer
to the Title Menu as the “scene
index.”
2
Press the arrow buttons ( o /p /s /B ) to select the
desired Title, then press the ENTER button.
Playback will begin at the Title you selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Pausing Playback
DVD
AUDIO CD
Pausing Playback...
Pausing Playback
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
DVD
MEMORY
VCR
1
PLAY
STOP
1
2
During disc playback, press the DVD button, then press the
PAUSE button on the rem ote control. Playback will pause and
the sound will be muted.
2
1
REW
F.FWD
PAUSE
PAUSE
1
4
7
2
5
8
3
6
9
SLOW
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
2
REPEAT
STATUS/EXIT
Press the PLAY button to resum e playback.
PLAY
Memory On...
DVD
Mem ory O n:
Resum ing playback from the point
where playback stopped
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
DVD
MEMORY
VCR
PLAY
STOP
REW
F.FWD
1
1
Helpful Hints
Press the DVD button, then press the STOP button during
disc playback. Playback will stop, and STOP will appear at the top
right corner of the TV screen. In a few seconds, MEMO ON
(Memory On) will appear in the top left corner of the TV screen.
• Memory On can be erased by
pressing the STOP button a second
time while playback is stopped.
MEMO OFF will appear briefly at
the top left corner of the TV screen.
• Memory On is not available with
Audio CDs.
STOP
MEMO ON
• The DVD/VCR will switch to VCR
mode automatically if disc playback
is paused or stopped for 30 min-
utes. This helps avoid the possible
burning of a still image into the TV
picture tube. Details are on page
77.
2
Press the PLAY button. Playback will resum e from the
point where playback stopped last.
PLAY
•
To see the on-screen display mes-
sages, such as PLAY, STOP, or
PAUSE, set OSD MESSAGE to ON.
Details are on page 74.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step by Step Playback 53
DVD
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
1
PLAY
STOP
Press the DVD button, then press the PAUSE button to
1
3
pause playback. The sound will be muted.
REW
F.FWD
PAUSE
PAUSE
1
4
2
5
8
3
6
9
1,2
SLOW
7
A
B
SPEED
+10
0
DISPLAY
2
SEARCH MODE
TIME SEARCH
CLEAR
Press the PAUSE button repeatedly to see the picture
advance one fram e (or step) at a tim e.
The sound will remain muted. PAUSE will appear briefly on the
screen each time you press the PAUSE button. (OSD MESSAGE
must be set to ON. Details are on page 74.)
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
3
Press the PLAY button to resum e playback.
PLAY will appear briefly on the screen. (OSD MESSAGE must be
set to ON. Details are on page 74.)
PLAY
Slow Motion
DVD/VCR
OUTPUT
VCR/TV
DVD
MEMORY
DVD
VCR
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
3
2
1
PLAY
STOP
1
REW
F.FWD
1
Press the DVD button, then press the PAUSE button dur-
ing playback.
PAUSE
1
4
2
5
3
6
2
Press the F.FW D button. Slow motion playback will begin.
Press the F.FWD button repeatedly during slow motion playback
to vary the speed of slow motion playback. You may play the DVD
at 1/16, 1/8, or 1/2 the normal playback speed.
Helpful Hints
• The sound will be muted when
playback is paused and during
slow motion playback.
• You can not play the DVD in
reverse slow motion.
3
Press the PLAY button to return to norm al playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Fast Forward/Reverse Search
DVD
AUDIO CD
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
1
During playback, press the DVD button, then press the
F.FW D button or the REW button on the rem ote control.
● On a DVD, pressing the F.FWD or REW button repeatedly will
forward or reverse the picture at twice, eight times, or 32 times
the normal playback speed. Sound will be muted during searching.
● Use the F.FWD button for a forward search. Press the REW
button for a reverse search.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
2
1
PLAY
STOP
REW
F.FWD
PAUSE
Press the REW button.
Press the F.FWD button.
1
4
2
5
8
3
6
9
EX2
DX2
SLOW
Press the REW button
again.
Press theF.FWD button
again.
7
A
B
SPEED
+10
EX8
DX8
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
Press the REW button
again.
Press the F.FWD button
again.
DX32
STATUS/EXIT
MENU
ENTER
EX32
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
Press the REW button
again.
Press the F.FWD button
again.
● On an Audio CD, you may search forward or backward at 16
times the normal playback speed (hX16 or gX16). Pressing
the F.FWD or REW button repeatedly will not affect the speed of
the search. Sound will be intermittent during searching on an
Audio CD.
● Use the F.FWD button for a forward search. Press the REW but-
ton for a reverse search.
Press the REW button during Audio CD playback.
EX16
Press the F.FWD button during Audio CD playback.
DX16
Helpful Hint
2
• To see the search speed on the
screen, OSD MESSAGE must be set
to ON. Details are on page 74.
Press the PLAY button to return to norm al playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Track Playback 55
AUDIO CD
Starting Playback at a Specific Track
There are three ways to begin playback on an Audio CD at a specific
Track. You may use the Number buttons, the SEARCH MODE button,
or the SKIP
H
G buttons. For details, read the information below.
A-C
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
A
Using the Num ber Buttons to Select a Track
PLAY
STOP
Press the DVD button, then press the Num ber buttons to
enter the desired Track num ber. The selected Track will be
located, and playback will start. You may select a Track with the
Number buttons during playback or when playback is stopped.
For single-digit Tracks, press a single Number button. For example,
to play Track three, press the Number 3 button.
B
REW
F.FWD
C
A
PAUSE
1
4
2
5
8
3
6
9
For Tracks numbered 10 and above, press the +10 button (repeat-
edly, if necessary), then press the Number button of the second
digit. For example, to play Track 12, press the +10 button, then
press the Number 2 button. For Track 22, press the +10 button
twice, then press the Number 2 button.
If you enter a Track number that is not available on the Disc, play-
back will not begin (or the current Track will continue to play).
SLOW
7
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
B
Using the SEARCH MODE Button to Select a Track
Press the DVD button, then press the SEARCH MODE but-
ton once, then press the o/p buttons to select the Track
num ber you desire. Finally, press the PLAY button to begin
playback at the selected Track.
If you press the SEARCH MODE button once during playback, the
current Track number will be displayed inside the brackets.
SEARCH/TRACK
TOTAL TRACKS: 07
TRACK:
Start
[
6_ ]
Exit
C
Using the SKIP H G Buttons to Select a Track
Press the DVD button, then press the SKIP G button during
playback to skip the current Track and m ove to the next
Track. Press the SKIP G button repeatedly to skip subse-
quent Tracks. The Track number will appear briefly on the TV screen.
Press the SKIP H button during playback to return to the
beginning of the current Track. Press the SKIP H button
repeatedly to go to previous Tracks. The Track number will
appear briefly on the TV screen.
If you press a SKIP button when playback is paused, you must press
the PLAY button to resume playback.
If you press a SKIP button when playback is stopped, the selected
Track will begin playing automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Title/Chapter Playback
DVD
Starting Playback at a Specific Title/Chapter
There are two ways to begin DVD playback at a specific Title or
Chapter. You may use the Number buttons or the SEARCH
MODE button.
A-B
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
VCR/TV
MEMORY
VCR
OUTPUT
DVD
A
PLAY
STOP
Using the Num ber Buttons to Select a Title/Chapter
During playback, press the DVD button, then press the
Num ber buttons to select a Chapter. The Chapter will be
located and playback will start.
REW
F.FWD
W hen playback is stopped, press the Num ber buttons to
select a Title. The Title will be located and playback will begin.
For single-digit Chapters or Titles, press a single Number button.
For example, to play Chapter three, press the Number 3 button
during playback. To play Title two, press the Number 2 button
while playback is stopped.
For Chapters/Titles numbered 10 and above, press the +10 button
(repeatedly, if necessary), then press the Number button of the sec-
ond digit. For example, to play Chapter 12, press the +10 button,
then press the Number 2 button during playback. For Title 22,
press the +10 button twice, then press the Number 2 button when
playback is stopped.
PAUSE
1
4
7
2
5
8
3
6
9
SLOW
A
A
B
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
B
SETUP
MODE AUDIO
SUB TITLE
B
Using the SEARCH MODE Button to Select a Title/Chapter
To start playback at a specific Chapter, press the DVD but-
ton, then press the SEARCH MODE button once, then
press the Num ber buttons or the o/p buttons to enter the
Chapter num ber. Press the PLAY button to begin playback
at the selected Chapter.
SEARCH/CHAPTER
TOTAL CHAPTERS: 027
CHAPTER: [ 15]
Start
Exit
To start playback at a specific Title, press the SEARCH MODE
button twice, then press the Num ber buttons or the o/p but-
tons to enter the Title num ber. Press the PLAY button to
begin playback at the selected Title.
Helpful Hints
• Some discs may not allow you to
change Titles in the Search Mode
screen.
• During DVD playback, press the
SKIP buttons to go to the next chap-
ter, return to the beginning of the
current chapter, or go to a previous
chapter.
SEARCH/TITLE
TOTAL TITLES: 07
TITLE: [ 5_ ]
Start
Exit
Download from Www.Somanuals.com. All Manuals Search And Download.
Specific Time Playback 57
DVD
AUDIO CD
Starting Playback at a Specific Disc Tim e
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
1
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
Press the DVD button, then press the SEARCH MO DE
button repeatedly (three times for DVDs or two times for
Audio CDs).
DVD
1
PLAY
STOP
3
REW
F.FWD
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [ _h_ _m_ _s ]
PAUSE
1
4
2
5
8
3
6
9
Start
Exit
SLOW
7
A
B
2
SPEED
+10
0
DISPLAY
2
SEARCH MODE
TIME SEARCH
CLEAR
Use the Num ber buttons to enter the Disc tim e at which
you want playback to begin.
● Example: 1 hour, 23 minutes and 30 seconds
1 ● +10 ● +10 ● 3 ● +10 ● +10 ● +10 ● 0
● To enter zero, press the Number 0 (zero) button or press the
B button.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
● Make sure the time you enter is within the total time of the
Disc. If it is not, you will have to enter a different time.
● If you make a mistake, press the B button repeatedly until you
reach the item you need to correct (hour, minute, or second),
then enter the correct information.
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h05m30s]
Start
Exit
3
W ithin 30 seconds, press the PLAY button. Playback will
start at the tim e that you specified.
Helpful Hint
• Specific time playback is not avail-
able with some discs or if MEMO-
RY OFF is activated for a DVD.
Details are on page 52.
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Repeat Playback (Discs)
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
1
Press the DVD button, then press the REPEAT button
repeatedly until the repeat m ode you want appears in the
top left corner of the TV screen.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
DVD
● Repeatedly pressing the REPEAT button during playback lets
you choose REPEAT CHAPTER, REPEAT TITLE, or REPEAT
OFF.
● If a Chapter is playing repeatedly, then you press the Number
buttons to select a new Chapter, the new Chapter will play
repeatedly.
1
PLAY
STOP
REW
F.FWD
PAUSE
1
4
2
5
8
3
6
9
Press the REPEAT button to select
REPEAT CHAPTER. The current
REPEAT
[CHAPTER]
SLOW
Chapter plays over and over.
7
A
B
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
Press the REPEAT button again to
select REPEAT TITLE. The entire
Title plays over and over.
REPEAT
[TITLE]
REPEAT
TITLE
STATUS/EXIT
1
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
Press the REPEAT button again to
select REPEAT OFF. Regular play-
REPEAT
[OFF]
back will resume.
AUDIO CD
● Repeatedly pressing the REPEAT button during playback lets
you choose REPEAT TRACK, REPEAT ALL and REPEAT OFF.
● If a Track is playing repeatedly, then you press the Number but-
tons to select a new Track, the new Track will play repeatedly.
REPEAT
[TRACK]
Press the REPEAT button to select
REPEAT TRACK. The current
Track plays over and over.
Press the REPEAT button again to
select REPEAT ALL. The entire
REPEAT
[ALL]
Audio CD plays over and over.
Press the REPEAT button again to
select REPEAT OFF. Regular play-
REPEAT
[OFF]
Helpful Hint
back will resume.
• Repeat playback is not available
with some discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
A-B Repeat Playback 59
DVD
AUDIO CD
You can play a section of an Audio CD or DVD repeatedly.
Follow these steps to set up the section that you want to play
over and over.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
1
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
1
Press the DVD button.
PLAY
STOP
2
REW
F.FWD
4
2
Play the Disc to the point at which you want repeated
playback to begin.
PAUSE
1
4
2
5
8
3
6
9
SLOW
3
7
A
B
Press the A-B REPEAT button to set the starting point (A).
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
[ A -
]
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
4
Play or fast forward the Disc to the point at which you
want repeated playback to end, then press the A-B
REPEAT button again.
The section will begin to play immediately, playing over and over
until you cancel the A-B Repeat feature.
3-5
REPEAT
[ A - B ]
Helpful Hints
• A-B Repeat playback is not avail-
able with some DVDs.
• With DVDs, the entire A-B repeat
section must be within a single
Title.
• With Audio CDs, the A-B repeat
section can contain multiple
Tracks.
5
To cancel the A-B Repeat feature, press the A-B REPEAT
button so that REPEAT [O FF] appears on the TV screen.
Regular Disc playback will resume.
REPEAT
[ OFF ]
• Point B must be later on the Disc
than Point A.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 Programmed Playback
AUDIO CD
You may determine the order in which Tracks will play. The order
that you set is called the Program. To set up programmed play-
back, follow these steps.
POWER
TIMER SET
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
PLAY
STOP
1
4
1
REW
F.FWD
W hile playback is stopped, press the DVD button, then
press the MO DE button. The program screen will appear.
PROGRAM
T
[_ _] / 14 TOTAL
0h00m00s
PAUSE
1
4
2
5
8
3
6
9
2-3
SLOW
7
A
B
SPEED
+10
Start,
Delete
Exit
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
2
RETURN
ANGLE
Press the Num ber buttons or the o/p buttons to enter
the num ber of the first Track that you want to play.
Then, press the ENTER button to store the selected
Track in the Program .
● If you enter a wrong Track number, press the CLEAR button.
The last Track in the Program will be removed.
PROGRAM
SETUP
MODE AUDIO
SUB TITLE
1
T
[_ _] / 14 TOTAL
0h07m46s
position in program
01: 12
track number
Helpful Hints
Start,
Delete
Exit
• Specific Track and random play-
back cannot be combined with
programmed playback. During pro-
grammed playback, the MODE
and SEARCH MODE buttons will
not operate.
• You may play a Program repeat-
edly. During programmed play-
back, press the REPEAT button so
that REPEAT [ON] appears. The
program will play over and over.
• To see which Tracks you stored in
the Program, press the STOP but-
ton to stop playback, then press
the MODE button so that the
PROGRAM screen appears.
3
Repeat step 2 until you have selected all the Tracks you
wish to play in the Program .
● Up to 20 Tracks may be stored in the Program.
● Make sure the Track numbers you enter are available on the
Audio CD. If it is not, you will have to enter a different track.
4
Press the PLAY button. The Tracks will play in the order in
which you programmed them. The Program will play once.
● The contents of the program will be stored until you turn off
the DVD/VCR or open the Disc tray.
• Programmed playback can only be
started from the program screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Random Playback 61
AUDIO CD
You may play the Tracks of an Audio CD in Random order
instead of the order in which they are recorded (1,2,3...). To set
up Random Playback, follow these steps.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
1
PLAY
STOP
2
REW
F.FWD
1
PAUSE
W hile playback is stopped, press the DVD button, then
press the MO DE button repeatedly so that the RANDO M
screen appears.
1
4
2
5
8
3
6
9
SLOW
7
A
B
RANDOM
SPEED
+10
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
Start
Exit
SETUP
MODE AUDIO
SUB TITLE
2
W hile the RANDO M screen appears, press the PLAY but-
ton. The Tracks will play in random order. After all the Tracks on
the disc have played once, playback will stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 Audio Language/Sound Mode
The DVD/VCR allows you to select a Language for DVDs or a
Sound Mode for Audio CDs. Before you begin, put the DVD/VCR
in DVD mode.
POWER
TIMER SET
● Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
Language
DVD
1
PLAY
STOP
REW
F.FWD
1
Press the DVD button, then press the AUDIO button dur-
ing playback, then press the o/p buttons to select the
desired language.
● The language can be changed only if multiple languages are avail-
able on the DVD.
PAUSE
1
4
2
5
8
3
6
9
SLOW
7
A
B
SPEED
+10
AUDIO
AUDIO
1
:E N G /8
0
DISPLAY
Press the o/p buttons.
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
2
: F R E /8
Press the o/p buttons again.
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
AUDIO
8
:
J P N /8
Press the o/p buttons again.
HELLO
BONJOUR
●
•••
AUDIO 1
AUDIO 2
Sound Mode
AUDIO CD
1
Press the DVD button, then press the AUDIO button dur-
ing playback, then press the o/p buttons until the sound
m ode you want appears.
Helpful Hints
● When producers record an Audio CD, they record the sound
on two channels - the left and the right. You can choose to hear
the sound on the left channel, the sound on the right channel,
or the sound on both channels (Stereo). You will select L-CH,
R-CH, or STEREO.
• If a desired language is not shown
after pressing the o/p buttons sev-
eral times, the DVD does not have
that language.
• The display will disappear after
about 15 seconds.
• Some DVDs only allow you to
change the language in the Disc
menu.
• When you use the DIGITAL AUDIO
OUT COAXIAL jack, the sound
mode of audio CDs cannot be
changed.
Both right and left channels
are active (stereo).
AUDIO S T E R E O
Only the right channel is active.
AUDIO
AUDIO
R
L
-
-
C H
Only the left channel is active.
C H
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitle Language 63
DVD
The DVD/VCR allows you to select a language for subtitles from
those available on the disc.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
DVD
1
PLAY
STOP
REW
F.FWD
1
Press the DVD button, then press the SUBTITLE button
during playback. The subtitle menu will appear on the TV
screen.
PAUSE
1
4
2
5
8
3
6
9
SLOW
7
A
B
SPEED
+10
2
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
W ithin 15 seconds, press the o/p buttons to select a sub-
title language. Select a language from those available on the
DVD.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
2
1
SETUP
MODE AUDIO
SUB TITLE
SUBTITLE
SUBTITLE
1
: E N G /8
Press the o /p buttons.
Press the o /p buttons to
select another language.
Subtitle 2
2
: F R E /8
To turn off subtitles, press
the o /p buttons repeatedly
until O FF appears in the
subtitle menu.
SUBTITLE
0
: O F F /8
No subtitles
●
Helpful Hints
•••
HELLO
BONJOUR
• With some DVDs, you may select a
subtitle language in the Disc menu.
• If the desired language is not shown
after pressing the o/p buttons sev-
eral times, the Disc does not have
subtitles in that language.
SUBTITLE 1
SUBTITLE 2
3
The subtitle m enu will disappear after about 15 seconds.
• The subtitles may be delayed for a
few seconds.
• Your subtitle selection will be can-
celled if you open the Disc tray or
turn off the power. The default set-
ting of the DVD will be selected
again.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 Camera Angles
DVD
Some DVDs contain scenes that were recorded from different
angles. You may select a camera angle with the DVD/VCR.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
1
DVD
Press the DVD button, then press the ANGLE button
during playback.
1
PLAY
STOP
REW
F.FWD
2
W ithin 15 seconds, press the o/p buttons to select a dif-
PAUSE
ferent angle.
1
4
2
5
8
3
6
9
2
SLOW
7
A
B
SPEED
+10
ANGLE [ 1 ]/8
Angle 1 (default) of eight
0
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
possible angles
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
Press the o /p buttons to
select another angle.
RETURN
ANGLE
ANGLE [ 2 ]/8
SETUP
MODE AUDIO
SUB TITLE
Angle 2
1
Press the o /p buttons again.
Angle 8
ANGLE [ 8 ]/8
● If the Disc contains sequences recorded from different camera
angles, the angle symbol will appear at the bottom-right of
the screen. You can change the camera angle when the symbol
appears on the screen.
● The camera angle cannot be changed if the Disc does not con-
tain sequences recorded from different camera angles.
Helpful Hints
• The ANGLE ICON must be set to
ON in order for the angle symbol to
appear as described in step 2. To
set ANGLE ICON to ON, see page
74.
• If the angle status appears on the
screen (for example, ANGLE [1]/8),
the angle symbol will not appear on
the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Display (Discs) 65
DVD
AUDIO CD
Accessing the Status Display
You can check the information about the current Disc by pressing
the DISPLAY button on the remote control.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
1
DVD
Press the DVD button, then press the DISPLAY/STATUS/
EXIT button repeatedly to access or rem ove the status
displays.
PLAY
STOP
1
REW
F.FWD
DVD
PAUSE
• Current Title number / total number of Titles
TITLE
TIME
REMAIN
:
:
01/04
0h24m14s
0h05m25s
1
4
2
5
8
3
6
9
• Elapsed time of the current Title
• Remaining time of the current Title
• Current Chapter number / total number of
Chapters in the current Title
CHAPTER
TIME
REMAIN
001/010
0h02m25s
0h01m31s
SLOW
7
A
B
SPEED
+10
• Elapsed time of the current Chapter
• Remaining time of the current Chapter
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
• Current language for the sound
RETURN
ANGLE
AUDIO
:
1.ENGLISH
DOLBY DIGITAL
6CH
• Current audio format (DOLBY DIGITAL 5.1
Channel is displayed as DOLBY DIGITAL 6 CH.)
• Current language for the subtitles
• Selected angle / total number of angles
• VIRTUAL 3D setting (appears only if
VIRTUAL 3D is ON)
SETUP
MODE AUDIO
SUB TITLE
SUBTITLE
ANGLE
:
:
2.FRENCH
8/8
VIRTUAL 3D
No display
AUDIO CD
• Current Track number / total Track number
• Elapsed time of the current Track
• Remaining time of the current Track
• Current play mode
TRACK
TIME
REMAIN
:
01/04
0h05m25s
0h01m31s
PROGRAM
No display
Download from Www.Somanuals.com. All Manuals Search And Download.
66 Parental Lock Levels
Parental Lock allows you to block viewing of DVDs that have ratings
that exceed your selections. To set the levels, follow the steps below.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
TIMER SET
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
1
PLAY
STOP
1
W hile playback is stopped, press the DVD button, then press
the SETUP button. The setup screen will appear.
REW
F.FWD
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
PAUSE
4. LOCK
5. OTHERS
1
4
2
5
8
3
6
9
4
2
5
1
Enter
/
Exit
SLOW
7
A
B
3
6
SPEED
+10
0
DISPLAY
2
SEARCH MODE
TIME SEARCH
CLEAR
Press the Num ber 4 button to select LOCK.
The SETUP/LOCK menu will appear.
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
SETUP/LOCK
RETURN
ANGLE
PASSWORD
[ _ _ _ _ ]
SETUP
MODE AUDIO
SUB TITLE
1. LEVEL
2. CHANGE PASSWORD
[NONE]
Enter,
Back
RATING EXPLANATIONS
3
• NC-17 - Under 17 not admitted
• R - Restricted; under 17 requires
accompanying parent or adult
guardian
Press the Num ber buttons to enter your 4-digit password.
● When doing this for the first time, enter any 4 digits. That number
will be the password until you change it.
• PG13 - Unsuitable for children
under 13
• PG - Parental Guidance suggested
• G - General Audience
SETUP/LOCK
PASSWORD
[
]
1. LEVEL
[NONE]
2. CHANGE PASSWORD
Enter,
Back
Helpful Hints
4
• Some DVDs are not compatible with
Parental Lock. Make sure the DVD
plays according to the Parental Lock
settings you have made.
• The DVD/VCR will not allow you to
change LEVEL settings until you enter
the correct password.
• When you try to play a Disc that has
a rating that exceeds the level you set,
a message will appear on the screen,
indicating the Disc cannot be played.
If this happens, press the
OPEN/CLOSE button to remove the
Disc, then select a level that allows
playback. Or select NONE to turn off
Parental Lock. Load the Disc again
and begin playback as usual. Some
Discs may allow you to simply enter
your 4-digit password, then begin play-
back automatically. Follow the instruc-
tions provided by the Disc message.
Press the Num ber 1 button to select LEVEL.
SETUP/LOCK
PARENTAL LOCK
Parental Lock is off.
NONE
All DVDs will play, regardless of rating.
DVDs rated NC-17 or higher will not play.
DVDs rated R or higher will not play.
LEVEL 8 [PLAY ALL]
LEVEL 7 [NC-17]
LEVEL 6 [R]
LEVEL 5
LEVEL 4 [PG13]
LEVEL 3 [PG]
LEVEL 2
DVDs rated PG13 or higher will not play.
DVDs rated PG or higher will not play.
DVDs rated G or higher will not play. Only
DVDs that are not rated will play.
LEVEL 1 [G]
Enter
5
Press the o/p buttons to select the level you desire, then press
the ENTER button. For example, if you want to play Discs rated
PG13, you must select LEVEL 5 or higher.
The SETUP/LOCK menu will reappear. The level you selected will
appear on the screen beside LEVEL.
6
Press the RETURN button twice to rem ove the m enu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Lock Password 67
You can change the password as often as you like. To do so, follow
these steps.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
3,5
1
POWER
TIMER SET
W hile playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
DVD
VCR
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
1
PLAY
STOP
REW
F.FWD
Enter
/
Exit
4
2
PAUSE
1
4
2
5
8
3
6
9
2
Press the Num ber 4 button to select LO CK.
The SETUP/LOCK menu will appear.
SLOW
7
A
B
SPEED
+10
0
DISPLAY
SETUP/LOCK
SEARCH MODE
TIME SEARCH
CLEAR
PASSWORD
[ _ _ _ _ ]
REPEAT
TITLE
STATUS/EXIT
1. LEVEL
2. CHANGE PASSWORD
[NONE]
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
Enter,
Back
6
1
3
Press the Num ber buttons to enter the 4-digit password.
● When doing this for the first time, enter any 4 digits. That num-
ber will be the password until you change it.
SETUP/LOCK
PASSWORD
[
]
1. LEVEL
[NONE]
2. CHANGE PASSWORD
Enter,
Back
Helpful Hints
• Write down the password in case
you forget it.
4
Press the Num ber 2 button to select CHANGE PASS-
W O RD. The first space in the PASSWORD will start flashing.
• To erase the old password, press
the POWER button to turn off the
DVD/VCR. Then, press and hold the
DVD STOP button on the DVD/VCR
while pressing the POWER button
on the DVD/VCR to turn on the
power again. When “HELLO”
appears on the display panel, you
may release the DVD STOP button.
Follow the steps on this page to set
the password that you desire.
5
Press the Num ber buttons to enter your new password.
6
Press the RETURN button twice to rem ove the m enu.
Download from Www.Somanuals.com. All Manuals Search And Download.
68 Audio Settings
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
1
2-3
W hile playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
POWER
TIMER SET
SETUP
1. LANGUAGE
2. VIDEO
DVD/VCR
OUTPUT
VCR/TV
MEMORY
3. AUDIO
DVD
VCR
4. LOCK
5. OTHERS
1
1
PLAY
STOP
Enter
/
Exit
REW
F.FWD
2
Press the Num ber 3 button to select AUDIO .
PAUSE
1
4
2
5
8
3
6
9
SETUP/AUDIO
1. DIGITAL OUT
2. VIRTUAL 3D
[OFF]
SLOW
7
A
B
SPEED
+10
0
Enter,
Back
Exit
SEARCH MODE
TIME SEARCH
DISPLAY
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
3
RETURN
ANGLE
Press the corresponding Num ber button to select an
item : DIGITAL O UT or VIRTUAL 3D.
SETUP
MODE AUDIO
SUB TITLE
SETUP/AUDIO
DIGITAL OUT
• Sets the sample rate for playing a disc
recorded with high sound quality
• Select when a Dolby Digital decoder
is connected.
1. PCM
2. DOLBY DIGITAL [ON]
3. DTS [ON]
[48kHz]
• Select when a DTS decoder is connected.
Enter,
Back
Exit
To change the DIGITAL O UT settings, go to step 4.
SETUP/AUDIO
VIRTUAL 3D
1. OFF
2. ON
• Select ON to activate the 3D effect.
Enter,
Back
Exit
To change the VIRTUAL 3D setting, press the corresponding
Num ber button, then go to step 5.
This unit employs TruSurround system
of SRS Labs, Inc. as the
VIRTUAL 3D technology.
Helpful Hint
TruSurround and the
SRS Labs, Inc. in the United States and selected
foreign countries.
TruSurround technology is incorporated under
license from SRS Labs, Inc.
symbol are trademarks of
• To enjoy Dolby Digital Surround or
DTS Surround sound, you must
have the DVD/VCR connected to a
Dolby Digital or DTS decoder.
Details are on page 14.
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Settings (cont’d) 69
4
To change the PCM, DO LBY DIGITAL, or DTS settings,
press the corresponding Num ber button to select the
desired item , then press the Num ber button to choose
the setting (i.e. O N or O FF).
SETUP/AUDIO
POWER
TIMER SET
• Audio signals are converted to
PCM
48 kHz/16 bit signals when playing
a DVD recorded with high sound quality
(48 kHz/20 bit/24 bit, 96 kHz).
• Sound is reproduced at 96 kHz if a DVD
is recorded with high sound quality. If you
are playing 48 kHz discs or if 4:3 LETTER
BOX is selected, sound is reproduced
at 48 kHz.
1. 48kHz
2. 96kHz
DVD/VCR
OUTPUT
VCR/TV
DVD
MEMORY
VCR
Enter,
Back
Exit
PLAY
STOP
REW
F.FWD
SETUP/AUDIO
DOLBY DIGITAL
PAUSE
1. OFF
2. ON
1
4
7
2
5
8
3
6
9
•
Select ON when a Dolby Digital decoder is used.
4
5
SLOW
A
B
Enter,
Back
Exit
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
SETUP/AUDIO
DTS
REPEAT
TITLE
STATUS/EXIT
1. OFF
2. ON
MENU
ENTER
• Select ON when a DTS decoder is used.
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
Enter,
Back
Exit
5
Press the SETUP button to rem ove the m enu.
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Language Settings
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
DVD
1
POWER
TIMER SET
W hile playback is stopped, press the DVD button, then
press the SETUP button. The setup screen appears.
SETUP
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
1. LANGUAGE
2. VIDEO
DVD
3. AUDIO
4. LOCK
5. OTHERS
PLAY
STOP
1
REW
F.FWD
Enter
/
Exit
2
2. SUBTITLE
3. DISC MENU
4. PLAYER MENU [ENG]
PAUSE
Press the Num ber 1 button to select LANGUAGE.
1
4
2
5
8
3
6
9
SETUP/LANGUAGE
2-3
SLOW
1. AUDIO
[ORIG]
[AUTO]
[AUTO]
7
A
B
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
Enter,
Back
Exit
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
3
SETUP
MODE AUDIO
SUB TITLE
Press a Num ber button to select an item : AUDIO , SUB-
TITLE, DISC MENU, or PLAYER MENU.
1
SETUP/LANGUAGE
AUDIO
• The original language of each disc will be selected.
1. ORIGINAL
2. ENGLISH
3. SPANISH
4. FRENCH
• Voice is played back in English.
• Voice is played back in Spanish.
• Voice is played back in French.
5. OTHER
• You can select other languages for audio playback.
Enter,
Back
Exit
Exit
Exit
SETUP/LANGUAGE
SUBTITLE
• Subtitles are shown in the automatically selected language.
• Subtitles are shown in English.
• Subtitles are shown in Spanish.
• Subtitles are shown in French.
• You can select other languages for subtitles.
1. AUTO
2. ENGLISH
3. SPANISH
4. FRENCH
5. OTHER
Helpful Hints
Enter,
Back
• If the original or automatic settings
for AUDIO and SUBTITLE are the
same language, the subtitles will
not be shown.
SETUP/LANGUAGE
DISC MENU
• The disc menu is shown in the automatically selected language.
• The disc menu appears in English.
• The disc menu appears in Spanish.
• The disc menu appears in French.
• You can select other languages for the disc menu.
1. AUTO
2. ENGLISH
3. SPANISH
4. FRENCH
5. OTHER
• Language settings for AUDIO, SUB-
TITLE, and DISC MENU are not
available with some discs. Use the
AUDIO and SUBTITLE buttons
instead to select different lan-
guages for the audio and subtitles.
Details are on pages 62 and 63.
• Not all discs provide different lan-
guages for audio, subtitles, or disc
menus.
Enter,
Back
SETUP/LANGUAGE
PLAYER MENU
1. ENGLISH
2. SPANISH
3. FRENCH
• The on-screen display and DVD Player menus appear in English.
• The on-screen display and DVD Player menus appear in Spanish.
• The on-screen display and DVD Player menus appear in French.
Enter,
Back
Exit
Go to step 4 to change the settings within AUDIO , SUB-
TITLE, DISC MENU or PLAYER MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Settings (cont’d) 71
4
Press a Num ber button to select a setting.
● If OTHER is selected on the AUDIO, SUBTITLE or DISC
MENU screen, the COUNTRY CODE screen will appear. Press
four Number buttons to enter the country code you desire,
then press the ENTER button. Refer to the list on page 72. The
codes are listed alphabetically, according to language.
POWER
TIMER SET
● You can only select other languages for AUDIO, SUBTITLE, and
DISC MENU if the language is available on the Disc.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
DVD
SETUP/LANGUAGE
COUNTRY CODE
PLAY
STOP
[ _ _ _ _ ]
REW
F.FWD
Enter,
Back
Exit
PAUSE
1
4
2
5
8
3
6
9
4
5
5
SLOW
Press the SETUP button to rem ove the m enu.
7
A
B
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
Helpful Hint
• If you accidentally set the PLAYER
MENU LANGUAGE to French or
Spanish and need English:
1) Press the DVD button, then press
the SETUP button.
2) Press the Number 1 button
(IDIOMA or LANGUE).
3) Press the Number 4 button
(MENÚ EN PANTALLA or MENU
SUR ÈCRAN).
4) Press the Number 1 button
(INGLÉS or ANGLAIS).
5) Press the SETUP button to
remove the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
72 Language Settings (cont’d)
Language Country Code Language Country Code Language Country Code
A-B
I-K
S
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bangla
Bashkir
Basque
Bengali
Bhutani
Bihari
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4860
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Icelandic
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Samoan
Sangho
Sanskrit
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
6559
6553
6457
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian (ITA)
Japanese (JPN)
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean (KOR)
Kurdish
Spanish (SPA)
Sundanese
Swahili
Bislama
Breton
Bulgarian
Burmese
Byelorussian
L-N
Swedish
Laothian
Latin
Latvian
Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
5861
5847
5868
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
6658
6653
6647
6666
6652
6654
4861
6655
6661
6665
6664
6657
6669
C-E
Cambodian
Catalan
Chinese (CHI)
Corsican
Croatian
Czech
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
Danish
Dutch (DUT)
English (ENG)
Esperanto
Estonian
U-Z
F-H
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
6757
6764
6772
6855
6961
4971
6961
7054
5655
7161
7267
Faroese
Fiji
Finnish
French (FRE)
Frisian
Gaelic (Scots)
Galician
Georgian
German (GER)
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
5261
5256
5255
5264
5271
5350
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Nepali
Norwegian
O -R
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto
Persian
Polish
Portugese
Pushto
Quechua
Rhaeto-Romance
Romanian
6149
6164
6159
6247
6265
5247
6258
6266
6265
6367
6459
6461
6467
Yiddish
Yoruba
Zulu
Russian
Hungarian
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Settings 73
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
POWER
1
TIMER SET
W hen playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
DVD/VCR
OUTPUT
VCR/TV
DVD
MEMORY
VCR
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
1
PLAY
STOP
REW
F.FWD
Enter
/
Exit
PAUSE
1
4
7
2
5
8
3
6
9
2
Press the Num ber 2 button to select VIDEO .
2-4
SLOW
A
B
SPEED
+10
SETUP/VIDEO
0
DISPLAY
1. TV MODE
2. STILL MODE
[4:3LB]
[AUTO]
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
MENU
ENTER
RETURN
ANGLE
Enter,
Back
Exit
SETUP
MODE AUDIO
SUB TITLE
3
Press the corresponding Num ber button to select an
item : TV MO DE or STILL MO DE.
SETUP/VIDEO
TV MODE
•
Full-height pictures are shown, with one
or both sides trimmed
1. 4:3 PAN&SCAN
2. 4:3 LETTER BOX
3. 16:9 WIDE
.
1,5
• Wide screen (full-width) pictures are
shown, with black bars at top and bottom.
• Select if a wide screen TV
Enter,
Back
Exit
is connected to the DVD Player.
SETUP/VIDEO
STILL MODE
1. AUTO
2. FIELD
• AUTO is normally selected.
• Select if pictures are blurred in auto mode.
• Select to show Still pictures in high resolution.
3. FRAME
Enter,
Back
Exit
4
Press the corresponding Num ber button to select a set-
ting.
Helpful Hint
5
Press the SETUP button to rem ove the m enu.
• You may select a different TV
MODE setting only if it is available
on the Disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
74 Other Menu Settings
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
1
POWER
TIMER SET
W hen disc playback is stopped, press the DVD button,
then press the SETUP button. The setup screen will appear.
DVD/VCR
OUTPUT
VCR/TV
MEMORY
VCR
SETUP
DVD
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
1
PLAY
STOP
REW
F.FWD
Enter
/
Exit
PAUSE
2
1
4
2
5
8
3
6
9
Press the Num ber 5 button to select O THERS.
SETUP/OTHERS
SLOW
2-4
7
A
B
1. OSD MESSAGE [ON]
2. ANGLE ICON
3. BACKGROUND [BLUE]
[ON]
SPEED
+10
0
DISPLAY
SEARCH MODE
TIME SEARCH
CLEAR
REPEAT
TITLE
STATUS/EXIT
Enter,
Back
Exit
MENU
ENTER
RETURN
ANGLE
SETUP
MODE AUDIO
SUB TITLE
3
Press the corresponding Num ber button to select an item :
OSD MESSAGE, ANGLE ICON, or BACKGROUND.
SETUP/OTHERS
OSD MESSAGE
1. ON
2. OFF
• Select ON to display messages on the screen,
such as PLAY, STOP, etc.
1,5
Enter,
Back
Exit
SETUP/OTHERS
ANGLE ICON
1. ON
2. OFF
• Select ON to display the angle icon.
Enter,
Back
Exit
SETUP/OTHERS
BACKGROUND
1. BLUE
2. GRAY
• Turns the Player menu background to blue
• Turns the Player menu background to gray
Enter,
Back
Exit
4
Press a Num ber button to select a setting.
5
Press the SETUP button to rem ove the m enu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance / Specifications 75
Care and Maintenance
Cleaning the DVD/VCR
Specifications
Video Heads
• Wipe the front panel and other exterior surfaces
of the DVD/VCR with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol
to clean the DVD/VCR. Do not spray insecticide
liquid near the DVD/VCR. Such chemicals may
discolor the surface or damage the DVD/VCR.
Four heads - Hi-Fi
Antenna
VHF/UHF – 75 ohm external antenna terminal
VHF O utput Signal
Channel 03 or 04 (switchable)
75 ohms unbalanced
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
Cable TV Channels
1-125
Product Type
Digital Video Disc Player & Video Cassette
Recorder
Don’t use cleaners.
Playable Discs
DVD-Video
Audio CD
Cleaning a Disc
• Use a soft, dry cloth to wipe the Disc.
• Wipe the Disc in a straight line from the center
to the edge. Never wipe the Disc in a circular
motion.
Color System
NTSC
Frequency Response
DVD (linear sound):
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
Audio CD: 20 Hz to 20 kHz
Signal-to-Noise Ratio (S/N Ratio)
Audio CD:
Wipe Discs from the center to the edge.
110 dB EIAJ (Electronic Industries Association of
Japan)
• Do not use detergent or abrasive cleaning agents.
• Handle the Discs so that fingerprints and dust do
not adhere to the surfaces of the Discs.
Dynam ic Range
DVD (linear sound): 95 dB
Audio CD: 94 dB (EIAJ)
Total Distortion Factor
Audio CD: 0.007% (EIAJ)
W ow and Flutter
Below the measurement limitation
(±0.001% W PEAK) (EIAJ)
Handle Discs
by the edges.
Power Requirem ent
• Always store the Disc in its protective case when
it is not in use.
120V AC +/- 10%, 60 Hz +/- 0.5%
Power Consum ption
Power on: 37 W
Standby (power off): 4 W
O perating Tem perature
41°F (5°C) to 104°F (40°C)
Relative Hum idity
30% to 80%
Keep the Disc in its case.
Dim ensions
Checking the Laser
17-1/8” (W) x 4-1/16” (H) x 12-11/16” (D)
(435mm x 103mm x 323mm)
• If the DVD/VCR does not operate as described in
this owner’s manual, the laser may be dirty.
Consult an Authorized Service Center for inspec-
tion and cleaning of the laser.
W eight
11.0 lbs. (5.0 kg.)
NOTE: Designs and specifications are subject to
Download from Www.Somanuals.com. All Manuals Search And Download.
76 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service. You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number of
your product before you call. This information is displayed on the back of the product. Also, please take a
moment to identify the problem you are having, and be prepared to explain this to the representative. If
you believe the representative will need to help you with operations, please stay near the product. Our
representatives will be happy to assist you.
The DVD/VCR has no power.
• Make sure the power cord is connected completely to an AC (alternating current) outlet.
• Press the POWER button to turn on the DVD/VCR. “HELLO” will appear briefly on the display panel as
the power is turning on.
The rem ote control will not operate the DVD/VCR.
• Aim the remote control directly at the DVD/VCR’s remote sensor. Details are on page 26.
• Remove all obstacles between the remote control and the DVD/VCR.
• Inspect and/or replace the batteries in the remote control. Details are on page 15.
• Use the remote control within 23 feet of the DVD/VCR.
• Press the DVD button, then try the other DVD feature buttons. (Press the DVD/VCR OUTPUT button
so that the red DVD light appears on the front of the DVD/VCR. This means the DVD/VCR is in DVD
mode.)
• Press the VCR button, then try the other VCR feature buttons. (Press the DVD/VCR OUTPUT button
so that the green VCR light appears on the front of the DVD/VCR. This means the DVD/VCR is in VCR
mode.)
• In VCR mode, make sure the VCR/TV light appears on the front of the DVD/VCR. If it does not, press
the VCR/TV button once.
No picture in DVD m ode.
• Make sure the video cable is connected correctly. You may connect either the yellow video cable (sup-
plied), an optional S-Video cable, or optional component video cables. Details are on pages 12-14.
• Make sure the TV is set to the correct Video In channel (usually the AUX IN, A/V IN, Auxiliary In,
Component Video In or S-Video In channel). Check your TV owner’s manual for details.
• Insert a Disc that is playable on this DVD/VCR. Details are on page six.
Disc cannot be played.
• Insert a playable Disc. Details are on page six.
• Place the Disc correctly in the recesses in the Disc tray. If the Disc is one-sided, place the Disc in the
tray with the label facing up. If the Disc is two-sided, make sure the side you want to play is facing up.
• Clean the Disc.
• Cancel the parental lock, enter the password, or change the control level. Details are on pages 66-67.
• Make sure the Disc is labelled for use in Region 1 or ALL regions. Details are on page six.
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints (cont’d) 77
No sound
• Connect the audio cables firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV
or audio equipment. Details are on pages 12-14.
• Check the audio settings of the DVD/VCR. Details are on pages 62 and 68-69.
• Turn on the power of the audio equipment and make sure it is set to the correct channel, usually
Auxiliary IN. Refer to the owner’s manual of the audio equipment for details.
• Check the audio settings of the Disc. For example, you may have selected “soundtrack” playback on a
DVD. Only the music of the movie will play, not the characters’ dialog; music might not be recorded
throughout the entire DVD.
Distorted picture
• Connect the DVD/VCR directly to the TV. Details are on pages 8-14.
• There are some cases where the picture may be distorted slightly; this is not a malfunction of the
DVD/VCR.
The cam era angle cannot be changed.
• The DVD might not contain segments recorded from different camera angles. See if multiple angles are
available. Details are on page 64.
The audio or subtitle language cannot be changed.
• The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or
subtitles in multiple languages. See if other languages are available. Details are on pages 62-63.
"No feature" sym bol appears on the screen, prohibiting an operation.
• That operation is currently prohibited by the DVD/VCR or is not available on the Disc. Details are on
page five.
The DVD/VCR switches to VCR m ode autom atically.
• The DVD/VCR will switch to VCR mode automatically if disc playback is paused or stopped for more
than 30 minutes (and no buttons are pressed on the remote control or the DVD/VCR).
A screen saver appears on the TV screen.
• The DVD whale will appear on the TV screen if Disc playback is stopped for more than one minute (and
no buttons are pressed on the remote control or the DVD/VCR). The DVD whale moves around on the
screen to prevent damage to your TV’s picture tube. A prolonged still image, including TV station identi-
fication logos or video games, may damage the picture tube.
Download from Www.Somanuals.com. All Manuals Search And Download.
78 Helpful Hints (cont’d)
Power Failure
• Timer recordings, the clock setting, the language selection, and channel setup may be lost if the power
fails for more than one minute. Follow the steps on pages 16 and 20. Then, see pages 36-38 to repro-
gram your timer recordings.
A TV program cannot be recorded.
• Put the DVD/VCR in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light
appears on the front of the DVD/VCR.
• Check the connections between the DVD/VCR, TV, antenna/cable, and Cable Box/Direct Broadcast
System (if applicable). Details are on pages 8-11.
• Make sure the tape has a record tab. Details are on page seven.
• Check the TV/VCR position. Details are on page 25.
• Check the CH3/CH4 switch. Details are on pages 8-11. Or, if you connected the DVD/VCR to the TV
using audio and video cables, select the correct audio and video in channel at the TV. Details are on page
12.
The DVD/VCR will not perform a tim er recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 36-39.
• Make sure a tape is in the DVD/VCR and the tape has a record tab. Details are on page seven. If, after
programming a timer recording, you press the TIMER SET button without putting a tape in the
DVD/VCR, the TIMER SET light will blink.
• If the record tab on a tape is missing, the DVD/VCR will eject the tape. The TIMER SET light will blink.
• Press the TIMER SET button to put the DVD/VCR in standby mode for the timer recording. The TIMER
SET light should appear on the front of the DVD/VCR.
• Make sure the clock is set. Details are on page 20.
• The DVD/VCR may not perform or continue a timer recording if a power failure of more than one
minute occurs.
• If you have a Cable Box/Direct Broadcast System, timer recordings are programmed differently. Details
are on page 10.
• Finish programming a timer recording at least five minutes before the recording is set to begin.
• 12 p.m. is noon; 12 a.m. is midnight.
There is no picture or the picture is noisy or contains streaks during video cassette tape play-
back.
• Put the DVD/VCR in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light
appears on the front of the DVD/VCR.
• Make sure the TV is on the same channel as the DVD/VCR’s CH3/CH4 switch. Or, if you connected the
DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the
TV. Details are on page 12.
• Make sure the DVD/VCR is in VCR position. Press the VCR/TV button so that the VCR/TV light appears
on the front of the DVD/VCR.
• Make sure channel 03 or 04 is properly adjusted at the TV.
• Adjust the tracking. Details are on page 45.
• TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR
away from the TV.
The Num ber buttons won’t work for channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan-
nel numbers as a three-digit number. Details are on page 30.
TV program s cannot be watched norm ally.
• Put the DVD/VCR in VCR mode, then put it in TV position. Press the DVD/VCR OUTPUT button so
that the green VCR light appears. Then, press the VCR/TV button so that the VCR/TV light disappears
from the front of the DVD/VCR. Details are on page 29.)
• Check the connections between the DVD/VCR, TV, antenna/cable, and Cable Box/Direct Broadcast
System (if applicable). Details are on pages 8-11.
Tape cannot be inserted.
• Insert the tape, window side up, with the record tab facing you.
• Make sure a tape isn’t already in the DVD/VCR by pressing the STOP/EJECT button on the DVD/VCR.
• Gently push on the center of the tape when putting it in the DVD/VCR. Never force the tape into the
DVD/VCR.
• If a timer recording is programmed and the DVD/VCR is in standby mode for the timer recording, you
can not insert a tape without a record tab.
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints (cont’d) 79
Tape cannot be rem oved.
• Make sure the power plug is completely connected to a power outlet.
• You have set a timer recording. Press the TIMER SET button to temporarily cancel standby mode. Then,
press the STOP/EJECT button on the DVD/VCR to eject the tape. Be sure to insert a tape and press the
TIMER SET button to put the DVD/VCR in standby mode for the timer recording.
•
Unplug the DVD/VCR power cord for five minutes. Then, plug in the power cord again, then press the
POWER button on the DVD/VCR. If the tape does not eject, press the STOP/EJECT button on the DVD/VCR
three to five times. If the tape still does not eject, you may need to have an authorized servicer remove the
tape.
DVD/VCR ejects the tape when the RECO RD button is pressed or when the TIMER SET but-
ton is pressed to set a tim er recording.
• Make sure the tape has a record tab. Details are on page seven.
Poor reception
• You may need to tune your TV again.
The m otor (cylinder) rotates even when the tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The
quick play mechanism allows the tape mechanism to switch from Stop mode to Play mode in one second.
Direct Broadcast System Hookups
• Watching one TV channel while recording another may not be possible if you have a DBS hookup. You
may have to set your TV to channel 03 or 04, then make your channel selections at the DBS.
• With many DBS hookups, if you use accessory audio and video cables to connect your DVD/VCR to
your TV, you will have to put your DVD/VCR in Line Input mode (channel 001 or 002).
Line Input m ode
• If you accidentally enter Line Input mode (AV FRONT or AV REAR will appear on your TV screen
briefly), press the CHANNEL o/p buttons or use the Number buttons to select another channel.
Hi-Fi Stereo Sound
•
During playback, Hi-Fi audio may temporarily revert to normal audio when you adjust tracking. This is nor-
mal.
• When connecting the DVD/VCR to a stereo TV, you will only get stereo sound if you use audio cables
to connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV,
and if the TV is in Line (Auxiliary) Input mode.
• When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on
your TV, the stereo light on the TV might not glow. But, as long as the status display indicates you are
receiving a stereo signal, you are receiving a stereo signal. This is normal. Details are on page 46.
• Only tapes recorded in Hi-Fi audio will play back in Hi-Fi audio. Tapes recorded in normal audio will
play back in monaural audio.
Cleaning the Video Heads
• Your DVD/VCR automatically cleans the video heads of the VCR each time you insert a tape. However,
the heads may become dirty. If so, use a commercially-available head cleaner or have an authorized ser-
vicer clean the video heads. Eventually, the heads may need to be replaced.
The playback picture is too dim , too bright, or fluctuates in brightness.
• Some programs may be broadcast with copyright protection technology in order to protect the rights of
copyright owners. This technology is used on programs that are recorded on video tapes or Digital
Video Discs (DVDs), as well as some programs broadcast by antenna/cable/satellite television channels.
Programs broadcast with copyright protection technology may not record clearly. Likewise, if you play a
tape that is a recording of a copyright protected program, the picture may not be clear. Tapes of copy-
right protected programs may have a picture that is dark or dim, or the brightness of the picture may
fluctuate. Therefore, you should avoid recording or playing copies of copyright protected programs.
This DVD/VCR incorporates copyright protection technology that is protected by method claims of cer-
tain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
80 Limited Warranty
Digital Video Disc Player / Video Cassette Recorder Combination
90 days Free Exchange / 91 days–One Year Reduced-Cost Exchange
WHO IS COVERED?
MAKE SURE YOU KEEP...
You must have proof of the date of purchase to exchange
your product. A sales receipt or other document showing
Please keep your sales receipt or other document showing
proof of date of purchase. Attach it to the owner’s manual
the date that you purchased the product is considered such and keep both nearby. Also keep the original box and pack-
proof.
ing material in case you need to return your product.
WHAT IS COVERED?
BEFORE EXCHANGING THE PRODUCT...
Please check your owner’s manual before exchanging the
product. Adjustments of the controls discussed there may
save you time and money.
Warranty coverage begins the day you buy your product.
For 90 days thereafter, you may exchange the defective
product for a new or renewed product at the store from
which it was purchased or through Philips. Either exchange
is made at no cost to you.
From 91 days to one year from the date of purchase, you will
pay a preset exchange fee to obtain a new or renewed
product. Follow the exchange procedures on the next
page. This exchange opportunity ends one year after the
LIMITATION OF LIABILITY AND REMEDY...
Philips is not liable under any circumstances for any direct,
indirect, special, incidental, or consequential damages, how-
soever incurred, even if notified of the possibility of such
damages.
date of purchase. The replacement product is covered only To the extent permitted by local law, the remedies provid-
for the warranty period of the original product. When the
warranty on the original product expires, the warranty on
all replaced products also expires.
ed in this warranty statement are your sole and exclusive
remedy.
This limited warranty gives you specific legal rights, and you
may also have other rights which vary from state/province
to state/province.
WHAT IS EXCLUDED?
Your warranty does not cover:
•
•
shipping charges to return defective product.
labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
TO EXCHANGE YOUR PRODUCT IN THE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Follow the instructions stated previously in the “What is
Covered” section, or refer to the exchange instructions on
the next page.
•
product repair and/or part replacement because of
improper installation, abuse, neglect, misuse, accident,
In the U.S.A., Puerto Rico, and U.S. Virgin Islands, all
implied warranties, including the implied warranties of non-
unauthorized repair or other cause not within the con- infringement, merchantability and fitness for a particular
trol of Philips Consumer Electronics.
purpose, are specifically disclaimed, and to the extent
inconsistent with law of the locality of the user, limited in
duration to the duration of this express warranty. Because
some states do not allow limitations on how long an
implied warranty may last, this limitation may not apply to
you.
•
•
reception problems caused by signal conditions or
cable or antenna systems outside the product.
a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of
incidental or consequential damages, so the above
exclusion may not apply to you. This includes, but is
not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
TO EXCHANGE A PRODUCT IN CANADA...
Please contact Philips at:
•
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
In Canada, this warranty is given in lieu of all other war-
ranties. There are no other warranties, express or implied,
including any implied warranties of merchantability or fit-
ness for a particular purpose.
•
•
damage caused by the use of non-VHS tapes or tapes
that have not been tested and labeled for use in two,
four, six, and eight hour VHS recorders.
TO GET OUT-OF-WARRANTY EXCHANGE...
a product that is used for commercial or institutional
In the U.S.A., Puerto Rico, or U.S. Virgin Islands, contact
purposes (including but not limited to rental purposes). Philips Service Solutions Group at 1-800-531-0039 to
obtain the cost of out-of-warranty exchange.
WHERE IS EXCHANGE AVAILABLE?
Warranty exchange is available in all countries where the
product is officially distributed by Philips Consumer
Electronics. In countries where Philips Consumer
Electronics does not distribute the product, the local
Philips service organization will attempt to exchange the
product, although there may be a delay if the appropriate
product is not readily available.
REMEMBER...
Please record below the model and serial numbers found
on the product. Also, please fill out and mail your warranty
registration card promptly. It will be easier for us to notify
you if necessary.
MODEL #__________________________________
SERIAL #__________________________________
Philips Service Solutions Group, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800
EL6473E002 /3-01
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (cont’d) 81
EXCHANGE INSTRUCTIONS
If your product is defective, you m ay be able to exchange it at the store from which it was purchased.
Most stores display a Return Policy. If not, ask the manager or sales associate how many days you have to
exchange a product with them. After the store’s return period has expired, or if the store does not have an
exchange program, you may exchange the product with Philips if you have your original sales receipt.
To exchange your product with Philips (per the warranty conditions stated previously), rem em ber:
•
•
If you exchange the product within 90 days of the original purchase, there is no cost to you.
If you exchange the product more than 90 days after but less than one year after the day of original purchase,
contact Philips Service Solutions Group (PSSG) at 1-800-531-0039 to determine the preset cost for exchange.
After 12 months from the day of original purchase, contact PSSG at 1-800-531-0039 for information regard-
ing out-of-warranty exchange.
•
•
If you do not have your original sales receipt, or if you have any questions, call PSSG at 1-800-531-0039.
To obtain a replacem ent product from Philips:
1. Contact PSSG at 1-800-531-0039 to determine the cost for exchange.
2. Complete the Exchange Form below.
3. Pack the product and its accessories in the original box or a suitable alternative. You will receive replacement
accessories with your replacement product. For packing details, call 1-800-531-0039.
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into
an envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope “Return
Documents Enclosed.” Place this envelope in the box with the product.
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight
prepaid, to:
Philips Recovery Center
Rojas 6
12420 Mercantile Avenue
El Paso, TX 79928
ATTENTION: DVD/VCR COMBINATION EXCHANGE
A replacement will be sent to you via UPS within 48 business hours of Philips’ receipt of the product.
EXCHANGE FORM
Your Address (street address to which replacem ent should be delivered, no P.O. boxes allowed):
Name:
Street Address:
City:
Phone (day):
Apt. #:
State/Province:
Phone (night):
Zip Code/Postal Code:
Exchange Fee:
+ Sales Tax:
= Total:
Method of Paym ent: (Check one. Please, no cash or CODs.)
_____ Check/Money order
Check/Money order No.
Account number
Expiration date
__________
__________
__________
__________
_____ American Express
_____ Visa
_____ Novus/Discover
_____ Mastercard
___________________________
___________________________
___________________________
___________________________
Signature: _____________________________________________________________
Detailed reason for return, use additional paper if necessary: _____________________________________________
_______________________________________________________________________________________________
Model Number
Serial Number
Rem em ber, the return box should include the following:
•
•
The product,
•
Accessories supplied with the product, and
Com pleted Exchange Form and sales receipt, • Paym ent, if applicable.
Download from Www.Somanuals.com. All Manuals Search And Download.
82 Glossary
AUDIO IN/O UT Jacks: jacks located on the front and back of the DVD/VCR which are used to receive
audio from another source (IN) or to send audio to another system (OUT).
Autom atic Channel Setup: process in which the DVD/VCR memorizes all available TV channels. Then,
when you press the CHANNEL o/p buttons, you only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69).
• Cable – all standard channels can be received without a Cable Box.
Cable Box/DBS O utput Channel: 03 or 04.
CD: Compact Disc (audio)
Coaxial jack: Used to send digital audio to a decoder or amplifier, allowing you to adjust the volume at
the decoder or amplifier. This connection provides the 5.1 channel surround sound as heard in movie the-
aters.
CO MPO NENT VIDEO O UT Jacks: jacks located on the back of the DVD/VCR which are used to
send high-quality video to a TV with Component Video In jacks.
Dolby Digital: A surround sound system that provides 5.1 channel sound as used in movie theaters.
DTS: Digital Theater Systems. This is a surround sound system, but it is different from Dolby Digital. The
formats were developed by different companies.
Dubbing: copying a video cassette tape using another VCR.
DVD: Digital Video Disc.
Fram e: a still picture.
HQ : high quality; a feature in the VCR circuitry which provides enhanced picture detail.
Line Input: The channel to which you set your DVD/VCR during video cassette tape dubbing. If you use the
AUDIO and VIDEO In jacks on the front of the DVD/VCR, select channel 002 (AV FRONT). If you use the
AUDIO and VIDEO IN jacks on the back of the DVD/VCR, select 001 (AV REAR). If you accidentally enter
Line Input mode, press the CHANNEL o/p buttons or use the Number buttons to select another chan-
nel.
O PTICAL DIGITAL AUDIO O UT Jack: Converts electrical signals into optical signals before sending
the audio to the amplifier. Optical audio is not prone to external electrical influences and has less noise,
which reduces adverse effects on external equipment. Be sure to keep the protective cap on the jack when
the jack is not being used. This keeps dust out of the jack.
O TR: One-Touch Recording; a timed recording on the VCR that starts immediately and records for 30
minutes to eight hours.
Rem ote Control: the small unit that came with your DVD/VCR; allows you to operate your DVD/VCR
from a distance.
RF coaxial cable: A cable supplied with your DVD/VCR. Use it to connect your DVD/VCR to your TV
(or Cable Box or DBS). The supplied cable is a snap-on type. However, you may use a screw-on type if you
prefer.
Special Effects: forward and reverse searching; a still picture; slow motion playback.
S-Video: Produces a clearer picture by sending separate signals for the luminance and the color. If you
connect an optional S-Video cable, you will not need to use the supplied yellow video cable.
Tape Speeds: how fast the video cassette tape travels during a recording or playback.
• SP (standard play) – fastest tape speed (recording time for a T120 tape is approximately two hours);
best picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).
VCR: video cassette recorder.
VIDEO IN/O UT Jacks: jacks located on the front and back of the DVD/VCR which are used to receive
video from another source (IN) or to send video to another system (OUT).
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 83
ac power cord . . . . . . . . . . . . . . . . .27
accessories . . . . . . . . . . . . . . . . . . . .84
angle button . . . . . . . . . . . . . . . .31, 64
ant-in (antenna in) jack . . . . . .8-14, 27
ant-out (antenna out) jack . . .9-11, 27
arrow buttons . . . . . . . . . . . . . . . . .31
audio button . . . . . . . . . . . . . . .31, 62
audio cd . . . . . . . . . . . . . . . . . . . . . . .6
audio in/out jacks . . .12-13, 27, 40, 46
automatic
dolby digital decoder/
dts decoder . . . . . . . . . . . . . . . .14
dolby surround
compatible amplifier . . . . . . . . . .14 screen saver . . . . . . . . . . . . . . . .50, 77
s-video . . . . . . . . . . . . . . . . . . . . .12 search buttons . . . . . . . . . . . . . . . . .26
stereo . . . . . . . . . . . . . . . . . . . . .13 search mode/time search button
tv . . . . . . . . . . . . . . . . . . . . . . .8-14
with cable box/dbs . . . . . . . . .10-11 searching . . . . . . . . . . . . . . . . . .44, 54
with stereo tv . . . . . . . . . . . . . . .12 second audio broadcast
rf coaxial cable . . . . . .9-11, 40, 46, 82
safety precautions . . . . . . . . . . . . . . .3
. . . . . . . . . . . . . . . . . .28, 43, 55-57
without cable box/dbs . . . . . . . .8-9
receiving . . . . . . . . . . . . . . . . .46-47
recording . . . . . . . . . . . . . . . .46-47
playback . . . . . . . . . . . . . . . . . . . .45
rewind, eject . . . . . . . . . . . . . . . .45 language (dvd) . . . . . . . . . . . . . . .70-72 sensor (remote) . . . . . . . . . . . . . . . .26
a-b repeat . . . . . . . . . . . . . . . . . . . .59 language selection (vcr) . . . . . . . . . .22 settings (dvd)
a-b repeat button . . . . . . . . . . . .29, 59 line input mode . . . . . . . . . .17, 40, 82
long play . . . . . . . . . . . . . . . . . . .38, 82
batteries . . . . . . . . . . . . . . . . . . . . . .15 lp . . . . . . . . . . . . . . . . . . . . . . . .38, 82
bit rate . . . . . . . . . . . . . . . . . . . .68-69
audio . . . . . . . . . . . . . . . . . . . .68-69
language . . . . . . . . . . . . . . . . .70-72
other . . . . . . . . . . . . . . . . . . . . . .74
video . . . . . . . . . . . . . . . . . . . . . .73
blue background . . . . . . . . . . . . . . .49 memory button . . . . . . . . . . . . .29, 42 setup button . . . . . . . . . . . . .28, 66-74
menu button . . . . . . . . . . . . . . . . . .29 skip/channel buttons . . . . . . . . .30, 55
camera angle . . . . . . . . . . . . . . . . . .64 menus . . . . . . . . . . . . . . . . . . . . .5, 51 slow
cassette compartment . . . . . . . . . . .25 mode button . . . . . . . . . . . . .30, 60-61
ch3/ch4 switch . . . . . . . . . . . .8-11, 27
button . . . . . . . . . . . . . . . . . .30, 44
motion . . . . . . . . . . . . . . . . . .44, 53
channel
adding . . . . . . . . . . . . . . . . . . . . . .18
number buttons . . . . . . . . . . . . . . . .30 slp . . . . . . . . . . . . . . . . . . . . . . .38, 82
sound mode . . . . . . . . . . . . . . . . . . .62
deleting . . . . . . . . . . . . . . . . . . . .18 on-screen status displays (vcr) . . . . .23 sp . . . . . . . . . . . . . . . . . . . . . . . .38, 82
reviewing . . . . . . . . . . . . . . . . . . .19 on-screen display (discs) . . . . . . . . .65 speed button . . . . . . . . . . . . . . . . . .31
selection . . . . . . . . . . . . . . . . . . . .30 one-touch recording . . . . . . . . . . . .35 sqpb . . . . . . . . . . . . . . . . . . . . . . . . .32
setup . . . . . . . . . . . . . . . . . . . .16-17 open/close button . . . . . . . . . . .26, 50 standard play . . . . . . . . . . . . . . .38, 82
o/p buttons . . . . . . . . . .26, 30, 45 optical jack . . . . . . . . . . . . . .14, 27, 82 status display (vcr) . . . . . . . . . . . . . .23
chapters . . . . . . . . . . . . . . . . . . . .6, 56 output button . . . . . . . . . . . . . . . . .26 stereo broadcast
clear button . . . . . . . . . . . . .30, 42, 60
clock setting . . . . . . . . . . . . . . . . . . .20 parental lock . . . . . . . . . . . . . . . .66-67
coaxial jack . . . . . . . . . . . . . .14, 27, 82 password . . . . . . . . . . . . . . . . . . . . .67
receiving . . . . . . . . . . . . . . . .46-47
recording . . . . . . . . . . . . . . .46-47
hookups . . . . . . . . . . . . . . . . . . .46
component video out jacks .13, 27, 82 pause button . . . . . . . . . .30, 44, 52-53 stereo TV hookups . . . . . . . . . . . . .12
connections . . . . . . . . . . . . . . . . .8-14 play button . . . . . . . . . . .26, 31, 32, 50 still picture . . . . . . . . . . . . . . . . .44, 52
contents, table of . . . . . . . . . . . . . . . .4 playing discs . . . . . . . . . . . . . . . . . . .50 stop button . . . . . . . . . . . . . . . . . . .28
controls
dvd/vcr . . . . . . . . . . . . . . . . . . . . .26 power
remote . . . . . . . . . . . . . . . . . .28-31
copyright protection . . . . . . . . .40, 79
counter only mode . . . . . . . . . . . . .23
playing tapes . . . . . . . . . . . . . . . . . . .32 stop/eject button . . . . . . . . . . . . . . .26
subtitle button . . . . . . . . . . . . . .29, 63
button . . . . . . . . . . . . . . . . . .26, 28 super high speed searching . . . . . . .44
cord . . . . . . . . . . . . . . . . . . . . . . .27 super long play . . . . . . . . . . . . . .38, 82
light . . . . . . . . . . . . . . . . . . . . . . .25 s-video out jack . . . . . . . . . . . . .12, 27
cst. in light . . . . . . . . . . . . . . . . . . . .25 program (audio cd) . . . . . . . . . . . . .60
table of contents . . . . . . . . . . . . . . . .4
daylight-savings time . . . . . . . . . . . .21 random playback . . . . . . . . . . . . . . .61 tape
display/status/exit button . . .23, 30, 65 real-time counter . . . . . . . . . . . . . . .42
display panel . . . . . . . . . . . . . . . .24-25 rear panel . . . . . . . . . . . . . . . . . . . . .27
duplication . . . . . . . . . . . . . . . . . . . .40 record button . . . . . . . .26, 31, 33, 35
duplication . . . . . . . . . . . . . . . . . .40
eject . . . . . . . . . . . . . . . . . . . .26, 45
speed . . . . . . . . . . . . . . . . . . .38, 82
dvd button . . . . . . . . . . . . . . . . . . . .28 record light . . . . . . . . . . . . . . . . . . .25 timer recording
dvd video . . . . . . . . . . . . . . . . . . . . . .6 recording cancelling . . . . . . . . . . . . . . . . . .39
dvd/vcr output button . . . . . . . . . . .28
basic . . . . . . . . . . . . . . . . . . . . . . .33
one channel/
checking . . . . . . . . . . . . . . . . . . .39
setting . . . . . . . . . . . . . . . . . .36-38
enter button . . . . . . . . . . . . . . . . . .29
ejecting a tape . . . . . . . . . . . . . . . . .79
watching another . . . . . . . . . . . . .34 timer set button . . . . . . . . . .26, 29, 38
prevention . . . . . . . . . . . . . . . . . . .7 timer set light . . . . . . . . . . . . . . . . . .25
timer . . . . . . . . . . . . . . . . . . . .36-39 title button . . . . . . . . . . . . . . . . .28, 51
fast forward . . . . . . . . . . . . . . . .44, 54 remote control
titles . . . . . . . . . . . . . . . . . . . .6, 51, 56
front panel . . . . . . . . . . . . . . . . . . . .26
f.fwd button . . . . . . .26, 31, 44, 53, 54
buttons . . . . . . . . . . . . . . . . . .28-31 tracking . . . . . . . . . . . . . . . . . . . . . .45
sensor . . . . . . . . . . . . . . . . . . . . .26 tracks . . . . . . . . . . . . . . . . . . . . . .6, 55
using . . . . . . . . . . . . . . . . .15, 28, 30 tv hookups . . . . . . . . . . . . . . . . . .8-14
glossary . . . . . . . . . . . . . . . . . . . . . .82 repeat button . . . . . . . . . . . . . . .29, 58 tv position . . . . . . . . . . . . . .25, 29, 34
repeat play (tape) . . . . . . . . . . . . . . .41
head cleaner . . . . . . . . . . . . . .7, 79-81 repeat playback (discs) . . . . . . . . . . .58 vcr position . . . . . . . . . . . . . . . .25, 29
helpful hints . . . . . . . . . . . . . . . .76-79 rerecording . . . . . . . . . . . . . . . . . . .40 vcr/tv button . . . . . . . . . . . . . . . . . .29
hi-fi stereo sound system . . . . . . . . .48 resuming play . . . . . . . . . . . . . . . . . .52 vcr/tv light . . . . . . . . . . . . . . . . . . . .25
hookups
amplifier with digital in jacks/
return button . . . . . . . . . . . . . . . . . .28 video in/out jacks .12, 14, 26-27, 40, 46
reverse searching . . . . . . . . . . . .44, 54
md deck/dat deck . . . . . . . . . . . .14 rew(ind) button . . . . . . .26, 28, 44, 54 warranty . . . . . . . . . . . . . . . . . . .80-81
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSO RIES
The following items are supplied with your DVD/VCR; they
are provided to help you use or set up your DVD/VCR.
RF Coaxial Cable, 75 ohm
4835 323 27011
Remote Control 4835 218 37301
Two AA Batteries 4835 138 17012
Audio and Video Cables
4835 321 17148
O PTIO NAL ACCESSO RIES
The following additional items are not provided with your
DVD/VCR, but they are designed for use with your new DVD/VCR.
To order these optional accessories, contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
1-800-851-8885.
Three Cassette Storage Cases (plastic)
VHS Cassette Rewinder
#M61117
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
IB8251E004
Printed In China
0VMN02575 / H9000UD * *
This owner’s manual is made of recyclable materials.
Remember to recycle!
Download from Www.Somanuals.com. All Manuals Search And Download.
|