Philips Stereo System FW D1 User Manual

D5  
FW- D1  
+
Mini Hi-Fi System  
with DVD and 3 CD changer  
3139 115 20051  
pg 001-41/D5-D1/21-Eng new  
1
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NEVER MAKE OR CHANGE CONNECTIONS WITH THE  
POWER SWITCHED ON.  
LASER SAFETY  
This unit employs a laser. Only a qualified service person  
should remove the cover or attempt to service this device,  
due to possible eye injury.  
Manufactured under license from Dolby Laboratories.  
Dolby, AC-3and the double-D symbol are  
trademarks of Dolby Laboratories. Confidential  
Unpublished Works. ©1992-1997 Dolby Laboratories,  
Inc. All rights reserved.  
CAUTION  
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN  
AVOID EXPOSURE TO BEAM (WARNING LOCATION:  
INSIDE ON LASER COVERSHIELD)  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
TruSurround and the SRS symbol are trademarks of SRS  
Labs., Inc. TruSurround technology is manufactured  
under license from SRS Labs., Inc.  
The region code for FW-D5/21M and  
FW-D1/21M is 3.  
3
LASER  
Type  
Wave length  
Semiconductor laser GaAlAs  
650 nm (DVD)  
The region code for FW-D5/21, /30  
4
785 nm (VCD/CD)  
7 mW (DVD)  
and FW-D1/21, /30 is 4.  
Output Power  
10 mW (VCD/CD)  
60 degree.  
Since it is usual for DVD movies to be released at  
different times in different regions of the world, all  
players have region codes and discs can have an  
optional region code. If you load a disc of a different  
region code to your player, you will see the region code  
notice on the screen. The disc will not play, and should  
be unloaded.  
Beam divergence  
Dolby Surround and the double-D symbol d are  
trademarks of Dolby Laboratories Licensing Corporation.  
Manufactured under license from Dolby Laboratories  
Licensing Corporation.  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorised by Macrovision  
Corporation, and is intented for home and other limited  
viewing uses only unless otherwise authorised by  
Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
For Customer Use:  
Read carefully the information located at the bottom of  
your DVD-VIDEO player and enter below the Serial No.  
Retain this information for future reference.  
Model No. __________________________  
Serial No. __________________________  
3
3139 115 20053  
pg 001-41/D5-D1/21-Eng new  
3
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FW-D5  
FW-D1  
4
3139 115 20053  
pg 001-41/D5-D1/21-Eng new  
4
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
English .....................................6  
Français .................................42  
Español ..................................80  
......................................118  
Português ............................154  
Warranty ..............................192  
Australia/New Zealand/Brasil/Mexico  
CLASS 1  
LASER PRODUCT  
5
3139 115 20053  
pg 001-41/D5-D1/21-Eng new  
5
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
General Information......................................................................... 7  
Safety Information............................................................................ 7  
Preparation................................................................................ 8 - 10  
Controls .....................................................................................11 - 13  
Operating The System ........................................................... 14 - 16  
DVD-VIDEO ...............................................................................17 - 31  
CD ...............................................................................................32 - 34  
Tuner ..........................................................................................35 - 36  
AUX/CDR .......................................................................................... 37  
Clock................................................................................................. 37  
Timer ................................................................................................. 38  
Specifications................................................................................. 39  
Maintenance ................................................................................... 40  
Troubleshooting .......................................................................40 - 41  
6
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
6
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL INFORMATION  
SAFETY INFORMATION  
If the system is brought directly from a  
cold to a warm location, or is placed in a  
very damp room, moisture may  
condense on the lens of the CD/DVD  
unit inside the system. Should this  
occur, the player will not operate  
normally. Leave the power on for about  
one hour with no disc in the system until  
normal playback is possible.  
Electrostatic discharge may cause  
unexpected problems. See whether  
these problems disappear if you unplug  
the AC power cord and plug it in again  
after a few seconds.  
IMPORTANT:  
PLEASE NOTE THAT THE  
VOLTAGE SELECTOR  
Accessories (Supplied)  
Safety Information  
Remote control  
Before operating the system, check that  
the operating voltage indicated on the  
typeplate (or the voltage indication  
beside the voltage selector) of your  
system is identical with the voltage of  
your local power supply. If not, please  
consult your dealer. The typeplate is  
located at the rear of your system.  
When the system is switched on, do not  
move it around.  
Batteries (two AA size) for remote  
control  
AM loop antenna  
FM wire antenna  
AC power cord  
For model FW-D5 only  
CS-05 speaker package (includes one  
pair of surround speakers and one  
centre speaker)  
LOCATED AT THE REAR OF  
THIS SYSTEM IS PRESET AT  
220V FROM THE FACTORY.  
FOR COUNTRIES THAT  
OPERATE AT 110V, PLEASE  
ADJUST TO 110V BEFORE YOU  
SWITCH ON THE SYSTEM.  
CVBS cable cinch  
Place the system on a solid base (e.g. a  
cabinet).  
General Information  
The typeplate (which contains the  
serial number) is located at the rear  
of the system.  
Recording is permissible if  
copyright or other rights of third  
parties are not infringed.  
Place the system in a location with  
adequate ventilation to prevent internal  
heat build-up in your system. Allow at  
least 10 cm (4 inches) clearance from  
the rear and the top of the unit and 5 cm  
(2 inches) from each side.  
To disconnect the system from the  
power supply completely, remove  
the AC power plug from the wall  
socket.  
Do not place the system on soft carpet  
that will cover the ventilation hole at  
the bottom.  
Do not expose the system to excessive  
moisture, rain, sand or heat sources.  
Under no circumstances should you  
repair the system yourself, as this will  
invalidate the warranty!  
Environmental Information  
All unnecessary packaging has been  
omitted. We have tried to make the  
packaging easy to separate into three  
materials: cardboard (box), polystyrene  
foam (buffer) and polyethylene (bags,  
protective foam sheet).  
Your system consists of materials which  
can be recycled and reused if disassembled  
by a specialized company. Please observe  
the local regulations regarding the disposal  
of packaging materials, exhausted  
batteries and old equipment.  
7
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
7
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
Rear Connections  
AUDIO IN  
I
H
surr. surr.  
L
R
AUDIO OUT  
W
G
J
STANDBY  
ON  
E
MIN  
MAX  
C
U
T
O
F
F
F
R
E
Q
U
E
N
C
Y
H
I
G
H
P
O
W
E
R
S
U
B
W
O
O
F
E
R
60Hz  
150Hz  
LINE-OUT  
AUX/CDR-IN  
L
SURROUND OUT  
SUB-  
WOOFER  
OUT  
K
AUDIO  
DIGITAL  
OUT  
S-VIDEO  
OUT  
(Y/C)  
VIDEO OUT  
(CVBS)  
F
R
FM ANTENNA 75  
AM ANTENNA  
B
A
L
CENTER  
+
VOLTAGE  
SELECTOR  
110V-  
REAR  
L
R
FRONT  
+
SURROUND  
127V  
+
220V-  
240V  
L
L
AC  
R
+
R
+
MAINS  
~
M
L
R
surr.  
surr.  
CENTER  
C
E
D
8
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
8
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
CAUTION:  
A AM Loop Antenna  
F Subwoofer Out Connection H Line Out Connection (wireless  
For optimal sound performance, it is  
recommended to use the supplied  
speakers.  
Do not connect more than one speaker  
to any one pair of +/- speaker  
terminals.  
Do not connect speakers with  
impedance lower than the speakers  
supplied. Please refer to the  
SPECIFICATIONS section of this manual.  
Connect the optional active subwoofer to  
ready)  
Connection  
the SUBWOOFER OUT terminal. The  
Connect the supplied loop antenna to the  
AM ANTENNA terminal. Place the AM loop  
antenna far away from the system and  
adjust its position for the best reception.  
You can connect the audio left and right  
LINE OUT terminals to a optional CD  
Recorder's ANALOGUE IN terminals. This  
allows you to record in an analogue format.  
subwoofer reproduces just the low bass  
sound effect (e.g. explosions, the rumble of  
spaceships, etc.). Be sure to follow the  
instructions supplied with the subwoofer.  
You can also install additional optional  
front active speakers away from the system  
(e.g. in another room) to reduce the  
B FM Wire Antenna  
G Wireless Surround Out  
Connection (for model FW-D5  
only)  
You may connect the transmitter of the  
wireless rear speakers (not supplied) to the  
SURROUND OUT terminal.  
Connection  
inconvenience of running long speaker  
wires across rooms. You can place as many  
remote speakers as you like provided they  
operate at the same radio frequency.  
Connect the wireless radio frequency  
transmitter to the LINE OUT terminals.  
Place the active speakers at your preferred  
location. Be sure to follow the instructions  
supplied with the active speakers.  
Connect the supplied FM wire antenna to  
the FM ANTENNA 75 terminal. Adjust  
the position of the FM antenna for the best  
reception.  
D Centre Speaker Connection  
(for model FW-D5 only)  
Connect the black (non-marked) wires to  
the black CENTER terminal and the blue  
(marked wires) to the blue CENTER  
terminal.  
Outdoor Antenna  
Note:  
For better FM stereo reception connect an  
outdoor FM antenna to the FM ANTENNA  
75 terminal using a 75 coaxial wire.  
Availability of a wireless transmitter and  
its peripherals are subjected to the  
approval of local authorities. Please  
check with the respective local safety or  
approving authority.  
E Rear Surround Speakers’  
Connection (for model FW-D5  
only)  
Connect the black (non-marked) wires to  
the black REAR SURROUND terminals and  
the coloured (marked) wires to the grey  
REAR SURROUND terminals.  
C Speakers Connection  
Connect the right speaker to Front  
terminal R, with the coloured wire to +  
and the black wire to -.  
Connect the left speaker to Front  
terminal L, with the coloured wire to +  
and the black wire to -.  
Clip the stripped portion of the speaker  
wire as shown.  
I Connecting other  
equipment to your system  
You can connect the audio left and right  
OUT terminals of a TV, VCR, Laser Disc  
player, DVD player or CD Recorder to the  
AUX/CDR IN terminals at the rear of the  
system.  
12 mm  
unlock  
lock  
9
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
9
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
J Video Out Connection  
Connect the VIDEO OUT (CVBS) terminal at  
the rear of the system to the TV or VCR  
VIDEO IN terminal for viewing or recording.  
L Adjusting the Operating  
Voltage (not available for all  
versions)  
Before connecting the AC power cord to a  
wall outlet, make sure that the voltage  
selector at the rear of the system is set to  
the local power line voltage. If not, reset  
the selector before connecting to the wall  
outlet.  
Inserting batteries into the  
Remote Control  
Insert the batteries (Type R06 or AA)  
into the remote control as shown in the  
battery compartment.  
Note:  
You can also choose to connect the  
S-VIDEO OUT (Y/C) terminal at the rear  
of the system to the S-VIDEO IN of the  
TV using an optional S-VIDEO cable.  
M AC Power Supply  
After all other connections have been  
made, connect the AC power cord to the  
system and to the wall outlet.  
K Audio Digital Out  
Connection  
You can record the digital sound from the  
CD/DVD, through this output, on any audio  
equipment with digital input (e.g. CD  
Recorder, Digital Audio Tape (DAT) deck,  
Digital to Analogue Converter and Digital  
Signal Processor).  
To avoid damage from possible battery  
leakage, remove dead batteries or  
batteries that will not be used for a long  
time. For replacement, use type R06 or  
AA batteries.  
Connect one end of the cinch cable (not  
supplied) to the DIGITAL OUT socket and  
the other end to the audio equipment's  
digital input. When connecting the cinch  
cable, make sure it is fully inserted.  
10  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
10  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
DISC CHANGE  
OPEN•CLOSE  
CD 1  
CD 2  
CD 3  
7
8
6
5
TV/AV  
DVD  
2
TUNER AUX/CDR  
CD  
3
C H A N G E R  
3
CD  
4
3
DVD MINI HIFI SYSTEM  
1
4
7
2
3
6
STANDBY  
ON  
N
LEFT  
CENTER RIGHT  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
5
8
0
1
P2  
P3  
P4  
9
SURR CHANNEL SURR  
9
IR SENSOR  
R
REPEAT  
SHUFFLE  
SURROUND CONTROL  
0
!
·
^
¤
^
!
5.1CH  
/
STEREO  
/
SURR  
/
3D  
VOLUME  
VCD • CD  
DVD  
CD 1 • 2 • 3  
BAND  
TUNER  
CDR  
AUX  
2
º
ª
CD  
@
#
O
PRESET  
à
á
SEARCH•TUNING  
STOP•CLEAR PLAY PAUSE  
PREV SIDE NEXT  
!
§
!
VOLUME  
CLOCK/  
TIMER  
PROG  
DIM  
DVD  
MENU  
OK  
Å
$
%
^
§
DVD  
OSD  
SURR.  
0
!
°
DVD  
MENU  
AXIS  
OK  
STOP  
PLAY  
í
É
ë
Ç
DVD JOG  
SOUND JOG  
ECHO  
KEY CONTROL  
&
*
(
*
PROG. AUDIO  
FTS  
A-B KARAOKE  
ª
DSC  
VEC  
DBB  
TIMER  
PLAYBACK  
MODE  
DVD / VCD / CD PLAYBACK  
DVD  
VCD  
CD  
OPEN/CLOSE  
)
¡
#
MIC LEVEL  
£
MIC  
11  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
11  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
7
OPENCLOSE  
for TUNER  
$
SOUND JOG  
Controls on the system and  
remote control  
to open or close the CD carousel tray.  
CD 1 / CD 2 / CD 3 (CD DIRECT  
PLAY)  
to select a CD tray for playback.  
SURROUND SOUND DISPLAY  
PANEL (for model FW-D5 only)  
to view the selected Surround setting.  
SURROUND CONTROL (SURR) (for  
model FW-D5 only)  
to select Multichannel Sound, Stereo,  
Surround or 3D Sound mode for DVD  
operation only.  
MODE SELECTION  
SEARCHTUNING à á  
( 1 2 )  
to stop programming.  
for DEMO (on the system only)  
to start or stop demonstration  
mode.  
PLAY PAUSE ÉÅ  
for DVD/VCD/CD  
to start or interrupt playback.  
for DVD/VCD  
to watch a still picture.  
í PREV / NEXT ë  
(PRESET)  
to select the desired sound effect of  
VEC/PERSONAL/DSC/DBB setting.  
You must select the respective sound  
feature first.  
8
1
STANDBY ON  
to switch the system on or to standby  
mode.  
9
VEC  
to select the desired Virtual  
Environment Control effect : HALL,  
CLUB, DISCO, CINEMA, CONCERT or  
ARCADE.  
2
to use for EASY SET.  
IR SENSOR  
0
3
sensor for the infrared remote control.  
SOURCE to select the following:  
DVD / (VCDCD)  
PERSONAL  
to select up to 6 personal preferred  
Spectrum Analyser settings :  
PERSONAL 1-6.  
to select DVD mode. When in DVD  
mode, you can play DVD, VCD or CD.  
CD / (CD 123)  
to select CD mode. When CD playback  
is stopped, press to select disc tray 1,  
2 or 3.  
for DVD/VCD/CD  
!
to skip to the beginning of the  
current, previous, or next title or  
track.  
DSC  
to select the desired Digital Sound  
Control effect : OPTIMAL, CLASSIC,  
TECHNO, VOCAL, ROCK or JAZZ.  
DBB  
to select a Dynamic Bass Boost level :  
BEAT, PUNCH or BLAST.  
n
to connect headphones.  
VOLUME  
to increase or decrease the volume.  
DIM  
for DVD/VCD/CD  
for VCD only  
to search backward/forward  
(except for CD playback in DVD-  
VIDEO tray).  
for TUNER  
to tune to a lower or higher radio  
frequency.  
for CLOCK (on the system only)  
to set the hour.  
for TV VOL.  
to adjust the TV volume if the  
remote operates your TV.  
STOPCLEAR Ç  
to select next or previous MENU  
(for VCD with PBC on).  
to select next or previous VCD track  
during playback (for VCD with PBC  
off).  
for TUNER  
to select a preset radio station in  
memory.  
for CLOCK (on the system only)  
to set the minute .  
CLOCK/TIMER  
to view the clock, set the clock or set  
the timer.  
SOUND CONTROL  
to select the desired sound feature :  
VEC, PERSONAL, DSC or DBB.  
TUNER / (BAND)  
to select Tuner mode. When in tuner  
mode, press to select the waveband:  
FM or MW.  
%
AUX / (CDR)  
to select sound from an external  
source (e.g. TV, VCR, Laser Disc player,  
DVD player or CD Recorder). When in  
AUX mode, press to select either AUX  
or CDR.  
^
&
to select brightness for the display  
screen : DIM 1, DIM 2, DIM 3 or DIM  
OFF.  
@
TV/AV (only on the remote control)  
to select TV or Video mode.  
DISPLAY SCREEN  
to view the current setting of the  
system.  
4
for DVD/VCD/CD  
to stop playback (in DVD mode  
only).  
#
for CD  
5
6
CD CAROUSEL TRAY  
DISC CHANGE  
to change CD(s).  
to stop playback or to clear a  
programme (in CD mode only).  
12  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
12  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
*
PROGram (FTS- Favourite track  
selection)  
for DVD/VCD/CD  
to programme disc tracks.  
for TUNER  
to programme preset radio  
stations.  
for CLOCK (on the system only)  
to select 12 or 24 hour in clock  
setting mode.  
DVD-VIDEO DISC TRAY  
OPEN/CLOSE 0  
to open or close the DVD-VIDEO tray.  
MIC LEVEL (not available for all  
versions)  
to adjust the mixing level for karaoke  
in DVD mode only.  
MIC (not available for all versions)  
to connect microphone jack.  
PLAYBACK MODE  
to view the selected playback mode :  
DVD, VCD or CD.  
DVD MENU  
to access the DVD disc menu.  
OK  
to confirm the selection.  
AXIS ( 1 2 3 4 )  
DVD JOG  
TIMER  
to switch on or off the timer.  
KARAOKE  
versions)  
to switch the Karaoke features ON/  
OFF mode.  
KEY CONTROL -/+ (not  
available for all versions)  
to adjust the key to suit your vocal  
range.  
Notes for remote control:  
to move the cursor up/down or left/  
right. You must select the AXIS  
movement direction first.  
SCAN  
First select the source you wish to  
control by pressing one of the  
source select keys on the remote  
control (e.g. DVD, TUNER, etc.).  
Then select the desired function  
(É, í, ë, etc.).  
(not available for all  
for DVD  
to playback the first 10 seconds of  
each chapter within a title.  
for VCD/CD  
to playback the first 10 seconds of  
each track.  
A - B (in DVD mode only)  
to playback a certain scene or passage  
of a disc repeatedly.  
PBC (PLAYBACK CONTROL)  
to switch on or off PBC mode (for VCD  
version 2.0 only).  
°
(
)
·
SHUFFLE  
ª
to play all the available discs and their  
tracks in random order.  
DIGIT 0 9  
(numbers consisting more than two  
figures must be keyed in within 2  
seconds.)  
¡
º
RETURN  
to return to the previous MENU level  
during playback.  
for DVD/VCD/CD  
to key in a disc title or track for  
playback or programming.  
for VCD with PBC on only  
to select a track.  
for TUNER  
to key in a preset radio station.  
£
¤
REPEAT  
to repeat a disc track, a disc, or all  
available discs (in CD mode only).  
to repeat playback a Chapter/Index,  
Title/Track or Disc (in DVD mode only).  
OSD MENU (ON SCREEN  
DISPLAY)  
to switch on or off the on screen  
display on the TV screen.  
ECHO -/+ (not available for all  
B
§
to switch the system to standby mode.  
to select the direction of cursor  
movement : up/down or left/right.  
(on the remote control only)  
to select movement of cursor: left,  
right, up or down.  
versions)  
to adjust the echo level for karaoke.  
AUDIO  
to select different audio languages  
available in the DVD disc.  
13  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
13  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE SYSTEM  
To start the demonstration mode  
Press and hold Ç(on the system only)  
for 5 seconds when the system is in  
standby mode.  
Switching the system ON  
DVD MINI HIFI SYSTEM  
STANDBY  
ON  
N
Press DVD, CD, TUNER or AUX.  
LEFT  
CENTER RIGHT  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
You can also switch on the system by  
pressing any one of the CD DIRECT PLAY  
buttons.  
SURR CHANNEL SURR  
IR SENSOR  
R
The demonstration will begin.  
SURROUND CONTROL  
5.1CH  
/
STEREO  
/
SURR  
/
3D  
VCD CD  
CD 1 2 3  
BAND  
TUNER  
CDR  
DVD  
CD  
AUX  
Easy Set  
EASY SET allows you to store all available  
radio stations automatically.  
O
PRESET  
SEARCHTUNING  
STOPCLEAR PLAY PAUSE  
PREV SIDE NEXT  
Switching the system to  
standby mode  
VOLUME  
CLOCK/  
TIMER  
PROG  
DIM  
Press STANDBY ON or B on the  
remote control.  
The system will switch to standby  
mode.  
Press and hold STANDBY ON (on the  
system only) for 5 seconds; when the  
system is in standby or demonstration  
mode.  
DVD  
DVD  
MENU  
AXIS  
OK  
DVD JOG  
SOUND JOG  
"EASY SET" will be displayed, and  
followed by "TUNER" and then  
"AUTO".  
EASY SET will start searching for all  
radio on FM band and then followed  
by radio stations on MW band.  
All available radio stations with  
sufficient signal strength will be  
stored. Up to 40 presets may be  
stored.  
Selecting the Source  
Important:  
Before you operate the system,  
complete the preparation procedures.  
To stop the demonstration mode  
Press and hold Ç(on the system only)  
for 5 seconds when the system is in  
demonstration mode.  
The demonstration will stop.  
"DEMO OFF" will be displayed.  
The system will switch to standby  
mode.  
Press the desired source selection  
button: DVD, CD, TUNER or AUX.  
The display indicates the selected  
source.  
Demonstration mode  
Note:  
The system has a demonstration mode that  
shows the various features offered by the  
system. When the system is switched  
on for the first time, the demonstration  
mode will start automatically.  
For an external source, make sure you  
have connected the audio left and right  
OUT terminals of the external  
equipment (TV, VCR, Laser Disc player,  
DVD player or CD Recorder) to the AUX/  
CDR IN terminals.  
Notes:  
Notes:  
When the system is switched on from  
the main power outlet, the CD carousel  
tray may open and close again to  
initialize the set.  
Even though the AC power cord is  
removed from and reconnected to the  
wall socket, the demonstration will  
remain off until it is switched on again.  
EASY SET will start with the FM band, if  
there are still presets available, the  
system will continue to store the MW  
band.  
When EASY SET is used, all previously  
stored radio stations will be replaced.  
The last preset radio station will appear  
on the display when EASY SET is  
completed.  
Notes:  
During the demonstration, if you press  
any source (or standby-on) button, the  
system will switch to the respective  
mode (or standby).  
When the system is switched to standby  
mode, the demonstration will resume 5  
seconds later.  
14  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
14  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE SYSTEM  
DIM 3 - half brightness with Spectrum  
Analyser Off and all LEDs on the  
system will be switched off.  
PERSONAL SOUND  
You can store up to 6 personal settings.  
Dim mode  
Volume Control  
You can select the desired brightness for  
the display.  
Adjust VOLUME to increase or decrease  
1 Press to select the PERSONAL feature.  
2 Adjust the JOG to select the desired  
Personal setting.  
The selected personal setting number  
will appear on the display.  
If no name has been stored  
previously, "PERSONAL X" will be  
displayed. "X" is the setting number.  
the sound level.  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
Press DIM to select DIM 1, DIM 2,  
DIM 3 or DIM OFF display mode.  
The DIM appears on the display.  
"DIM 1", "DIM 2", "DIM 3" or  
"DIM OFF" will be displayed  
For Personal Listening  
P2  
P3  
P4  
Connect the headphones plug to the n  
socket at the front of the system. The  
speakers will be muted.  
depending on the mode selected.  
Sound Control  
For Optimal sound listening, you can  
only select one of the following sound  
controls at a time : VEC, PERSONAL or  
DSC .  
DIM OFF - normal brightness with  
Spectrum Analyser On  
Personal Setting  
You can adjust the personal setting to your  
desired level with the JOG control.  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
1 Press and hold PERSONAL for about 5  
seconds to switch on the personal  
setting mode.  
"SELECT PRESET NUMBER" will  
be displayed.  
VIRTUAL ENVIRONMENT CONTROL  
(VEC)  
The VEC feature enables you to adjust the  
system to select a type of environment.  
DIM 1 - normal brightness with  
Spectrum Analyser Off  
2 Adjust the JOG to select the desired  
preset number for personal setting and  
press á to confirm the selection.  
"ADAPT LOW FREQ LEVEL" will  
be displayed.  
3 Adjust the JOG to select the desired  
Spectrum Analyser band level for low  
frequency.  
1 Press to select the VEC feature.  
2 Adjust the JOG to select the desired  
VEC setting : HALL, CLUB, DISCO,  
CINEMA, CONCERT or ARCADE.  
The selected environment is  
encircled.  
"HALL, CLUB, DISCO,  
CINEMA, CONCERT or  
ARCADE" will be displayed.  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
DIM 2 - half brightness with Spectrum  
Analyser On  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
The level will increase or decrease  
between+3 and -3.  
4 Press á to confirm the selection.  
"ADAPT MID FREQ LEVEL" will  
be displayed, followed by "ADAPT  
HIGH FREQ LEVEL".  
15  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
15  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE SYSTEM  
Repeat step 3 - 4 to select the desired  
middle and high frequencies of the  
Spectrum Analyser band levels.  
5 You can edit the name for the personal  
setting.  
The first character of the setting  
name will be flashing.  
DIGITAL SOUND CONTROL (DSC)  
The DSC feature enables you to adjust the  
system to suit your type of music.  
Note:  
Some CDs might be recorded in high  
modulation, which causes a distortion  
at high volume. If this occurs, switch off  
DBB or reduce the volume.  
1 Press to select the DSC feature.  
2 Adjust the JOG to select the desired  
DSC setting : OPTIMAL, CLASSIC,  
TECHNO, VOCAL, ROCK or JAZZ.  
The selected digital sound is  
encircled.  
"OPTIMAL, CLASSIC, TECHNO,  
VOCAL, ROCK or JAZZ" will be  
displayed.  
Automatic DSC-DBB / VEC-DBB  
selection  
The best DBB setting is generated  
automatically for each DSC or VEC  
selection. You can manually select the DBB  
setting that best suits your listening  
environment.  
6 Adjust the JOG to select the desired  
letter, number or symbol.  
"Ato Z", "0to 9" or "*, -, +, \, /, _".  
7 Press á to confirm the selection.  
The next character for editing will be  
flashing.  
Note:  
Repeat steps 6 - 7 to store up to 10  
For a neutral setting, select CLASSIC.  
characters.  
8 To store the setting, press PERSONAL  
again.  
DYNAMIC BASS BOOST (DBB)  
There are three DBB settings to enhance  
the bass response.  
Before storing the setting, you can  
press à to retrace the steps.  
To exit without storing the setting,  
press Ç.  
1 Press to select the DBB feature.  
2 Adjust the JOG to select the desired  
DBB level : BEAT, PUNCH or BLAST.  
The DBB LED will be lit.  
"BEAT", "PUNCH" or "BLAST" will  
be displayed.  
Notes:  
During personal setting, if no button is  
pressed within 90 seconds, the system  
will exit personal setting mode  
automatically.  
It is not possible to adjust the DBB level  
during personal setting, "USE JOG"  
will be displayed.  
To switch off DBB  
1 Press DBB briefly.  
2 Adjust the JOG until "DBB OFF" is  
displayed.  
16  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
16  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
General Information  
DVD-Video  
Video CD  
Audio CD  
Digital video discs provide perfect  
digital, studio-quality pictures; three  
dimensional digital; multi-channel  
audio; story sequences screened from  
your choice of camera angle; sound  
tracks in as many as eight languages;  
and up to 32 subtitles if available on  
disc.  
You will recognise  
You will recognise Video  
Audio CDs contain music  
DVD-Video discs by  
the logo shown at  
right. Depending on  
the material on the disc (a movie, video  
clips, a drama series, etc.) the disc may  
have one or more Titles. Each Title may  
have one or more Chapters. To make  
playback easy and convenient, your player  
lets you select Titles and Chapters.  
CDs by the logo shown at  
right. Depending on the  
material on the disc (a  
movie, video clips, a  
drama series, etc.) the disc may have one  
or more tracks. Tracks may have one or  
more indexes, as indicated on the disc  
case. To make playback easy and  
convenient, your player lets you select  
tracks and indexes.  
tracks only.  
You will recognise CDs by  
their logo which is shown  
at right. You can play them in conventional  
style through a stereo system, using the  
keys on the remote control and/or front  
panel, or via the TV using the On-Screen  
Display (OSD).  
DVD-Video uses state-of-the-art MPEG2  
data compression technology to register  
an entire movie on the single 5-inch  
disc. DVD's variable bitrate  
AUDIO CD  
DVD-VIDEO DISC  
TRACKS  
TITLE 1  
TITLE 2  
VIDEO CD  
TRACK 1  
INDEX 1 INDEX 2  
TRACK 2  
INDEX 2  
compression, running up to 9.8 Mbits/  
second, captures even the most complex  
pictures in their original quality.  
The crystal-clear digital pictures have a  
horizontal resolution of over 500 lines,  
with 720 pixels (picture elements) to  
each line. This resolution is more than  
double that of VHS, superior to Laser  
Disc, and entirely comparable with  
digital masters made in recording  
studios.  
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2  
CHAPTER 3  
1
2
3
4
5
6
7
8
9
10 11 12 ...  
INDEX 1  
INDEX 3  
In addition to the DVD-Video discs, you  
will be able to play all Video CDs and  
Audio CDs (including finalised CD  
Recordable and CD Rewritable).  
17  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
17  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Setting up the Multichannel  
system  
You must set up the system properly in  
order to enjoy the MULTICHANNEL to the  
fullest. First, connect the speakers.  
DVD MINI HIFI SYSTEM  
Surround Setup (for FW-D5  
DVD operation only)  
STANDBY  
ON  
N
LEFT  
CENTER RIGHT  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
SURR CHANNEL SURR  
IR SENSOR  
R
SURROUND CONTROL  
Multichannel sound  
5.1CH  
/
STEREO  
/
SURR  
/
3D  
VCD CD  
CD 1 2 3  
BAND  
TUNER  
CDR  
MULTICHANNEL SOUND gives you a  
completely new listening sensation. You  
will have the feeling of being in the middle  
of the action, because sound is coming  
from everywhere around you. Look for  
DVD  
CD  
AUX  
5-Speaker Connection  
Front speakers: Connect the front  
O
PRESET  
SEARCHTUNING  
STOPCLEAR PLAY PAUSE  
PREV SIDE NEXT  
speakers to the FRONT terminals.  
VOLUME  
CLOCK/  
TIMER  
PROG  
DIM  
Centre speaker: Connect the centre  
speaker to the CENTER terminals.  
Rear (surround) speakers: Connect  
either the wired rear surround speakers  
or a pair of wireless rear speakers (not  
supplied) to the SURROUND OUT  
terminals.  
DVD  
discs with the  
mark  
DVD  
MENU  
AXIS  
OK  
which indicates the material is encoded for  
multichannel surround sound.  
DVD JOG  
SOUND JOG  
Notice that DVDs do not always carry full  
multichannel surround. To be sure that a  
disc is multichannel encoded, consult your  
dealer.  
PLAYBACK  
MODE  
DVD / VCD / CD PLAYBACK  
DVD  
VCD  
CD  
OPEN/CLOSE  
MIC LEVEL  
CENTER  
Most ordinary stereo tapes and discs can  
be replayed using surround sound settings  
with good results. If the reproduction is  
distorted in surround mode, switch to  
normal stereo mode.  
MIC  
REAR  
SURROUND  
FRONT  
REAR  
LEFT  
FRONT  
LEFT  
REAR  
RIGHT  
FRONT  
RIGHT  
The availability of the various surround  
sound modes described depends on the  
number of speakers used and the incoming  
sound information.  
18  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
18  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Surround  
Positioning the Speakers  
To get the best surround sound effect,  
place the speakers as follows.  
Switching Surround Control  
Sound  
You can switch through the different  
surround modes. Note that the  
possibilities are related to speaker setup as  
defined.  
LEFT  
CENTER  
RIGHT  
SURR  
This surround mode enables  
normal surround sound  
reproduction with two  
speakers. Depending on the source  
material, Dolby Pro Logic or MPEG is  
reproduced (for connection to another  
Dolby Pro Logic decoder).  
CHANNEL  
SURR  
CENTER  
SPEAKER  
SUB-  
WOOFER  
MINI HIFI  
SYSTEM  
FRONT  
LEFT  
FRONT  
RIGHT  
TV  
Press SURROUND CONTROL (or  
SURR on the remote control) to select :  
MULTICHANNEL, STEREO, SURROUND  
or 3D SURROUND mode.  
The message "DOLBY DIGITAL  
AC3 5.1 CHANNEL, STEREO,  
SURROUNDor 3D SURROUND"  
will be displayed.  
SURROUND  
LEFT  
SURROUND  
RIGHT  
3D Surround  
The sound of the rear  
channel is simulated by the  
front left and right  
speakers.  
LEFT  
CENTER  
RIGHT  
SURR  
CHANNEL  
SURR  
Front Left and Right Speakers  
For the best sound, place the Left and Right  
speakers at an angle of approximately 45  
degrees to the listener. If the speakers'  
magnetic field affects the television  
picture, increase the distance between the  
TV and the speakers.  
Note:  
Always refer to OSD when selecting  
Multichannel (5.1)  
surround control sound. When in stop  
mode, the player will not display the  
correct surround selection.  
In addition to SURROUND,  
LEFT  
CENTER  
RIGHT  
the surround mode used  
will be displayed. AC3  
must be available on the  
source material.  
SURR CHANNEL SURR  
Centre Speaker  
For the best sound, place the centre  
speaker at the same height as the left and  
right speakers. Place the centre speaker  
directly above or beneath the television.  
Stereo  
All sound is reproduced and  
played through the front left  
and right speakers. This  
enables standard stereo  
reproduction.  
LEFT  
CENTER  
RIGHT  
SURR  
Rear (surround) Speakers  
CHANNEL  
SURR  
The surround speakers should be placed at  
normal listening ear level or mounted on  
the wall at the back of the room. Most  
important, experiment when placing the  
surround speakers in order to obtain the  
best sound.  
19  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
19  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Menu bar/Status window  
The status window displays the current  
status of the player and appears with the  
first part of the menu bar. (You must  
activate this in the Features Menu, see  
Personal Preferences for details).  
Angle  
9
1
2
3
4
5
6
7
8
10  
Child Lock On  
Child Safe  
Resume  
FTS TITLE  
P1  
CHAP.  
FM LW A M W SLEEP DIM TIMER  
P2  
P3  
P4  
P5  
P6  
General  
Action prohibited  
Disc type  
14  
13  
12  
11  
Default screen  
The default screen is displayed when the  
player is in STOP mode. It may contain a  
'Status Window' and a 'Temporary  
Feedback Field'. This screen gives  
information concerning prohibited actions,  
playback modes, available angles, etc.  
Tray status  
6
7
TITLE  
On Screen Display  
information  
DVD TITLE number  
CHAP.  
Temporary feedback field icons  
DVD CHAPTER number  
DISPLAY indications  
Scan  
8
TRACK/TOTAL TIME in hours, minutes  
and seconds  
REPEAT  
REPEAT active  
SHUFFLE  
SHUFFLE active  
DVD  
DVD disc inserted  
VCD  
(Video)CD disc inserted  
DVD MENU  
DVD MENU active  
3D SURROUND (for model FW-D5  
only)  
1
(for model FW-D5 only)  
AC-3 active  
SCAN  
Repeat All  
9
Repeat Title  
Repeat Track  
Repeat Chapter  
Shuffle  
2
SCAN active  
0
3
!
Repeat A-B active  
4
5
Remote control active (flashing)  
FTS  
Favourite Track Selection active  
@
#
Shuffle Repeat  
Repeat A to end  
Repeat A-B  
$
3D SURROUND active  
20  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
20  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Automatic setting  
The following items may have to be set in  
INITIAL SETUP:  
Turning On the power  
1 Switch on the TV and select the video in  
channel to which you connected your  
DVD-Video player.  
2 Press DVD.  
The player display lights and the  
"Initial Setup" screen appears.  
Preparation  
When settings will be taken from your TV  
or Home Cinema system, the message  
Auto configuring in processwill appear.  
Menus for which no settings are available  
will be displayed. They have to be set  
manually.  
Menu language  
NTSC/PAL Setting  
Before viewing the DVD or VCD, ensure  
that the PAL or NTSC setting of the system  
matches your TV set.  
The On Screen Menus will be displayed in  
the language you choose. You can choose  
from different languages.  
Notes:  
Audio language  
1 Before connecting the system to the  
power source, press and hold DVD and  
à (on the system only). While holding  
DVD and à, plug in the power cord.  
2 After PAL or NTSC appears on the  
display, release DVD and à at the  
same time.  
The Initial Setupwill only appear the very  
first time you turn on the player. In Initial  
Setup, you may have to set your personal  
preferences for some of the players most  
relevant items. See Initial Setup.  
Preferences have to be set in the order  
in which the item menus will appear on  
the screen.  
The Initial Setupscreen will only  
disappear after the settings for the last  
item have been confirmed.  
If any keys other than 3 or 4 or OK are  
pressed, Ä will appear on the screen.  
If the player is switched off while  
setting personal preferences, all  
preferences have to be set again after  
switching the player on again.  
The sound will be in the  
Initial Setup  
language you choose if it  
is available on the disc in  
play. If the language you  
select is not available,  
speech will revert to the  
first spoken language on  
the disc. You can choose  
from different languages.  
Audio language  
English  
Español  
Français  
Português  
Russian  
Polish  
Initial Setup  
Manual Operation  
After switching on the player for the very  
first time, the Initial Setup Screenwill  
appear.  
The PAL or NTSC that appears on the  
display indicates the current setting.  
To change the setting, press ë within  
3 seconds.  
Subtitle language  
After selected, the set will  
automatically switch to the last  
NTSC or PAL setting everytime the  
DVD or VCD source is selected.  
3 Remove the AC power plug from the  
wall outlet, then reconnect the power  
plug and switch on the system again.  
The subtitles will be in the  
language you choose if it  
is available on the disc in  
play. If the language you  
select is not available,  
subtitles will revert to the  
first subtitle language on  
the disc. You can choose  
from different languages.  
Initial Setup  
The menu for the first item to be set is  
displayed and the first option is  
highlighted.  
Subtitle language  
English  
Español  
Français  
Português  
Russian  
Polish  
1 Use the 3 or 4 keys to go through the  
options in the menu.  
The icon of the selected option will  
be highlighted.  
2 Press OK to confirm your selection and  
to go to the next menu.  
21  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
21  
6/8/01, 11:32 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
TV Shape  
If you have a wide screen (16:9) TV, select  
16:9.  
The menu bar can be accessed by  
pressing any of the following keys on  
the remote control: OSD MENU and  
AUDIO.  
The various items can be selected by  
pressing the OSD MENU button, then  
the 4 or 3 keys or by pressing the  
relevant keys on the remote control.  
Pressing OSD MENU while the menu  
bar is displayed will clear the menu bar  
from the screen.  
When selecting an item in the menu bar,  
the selected item will be highlighted  
and the appropriate cursor keys to  
operate this item will be displayed  
below the icon.  
< or > indicates that more items are  
available at the left/right of the menu  
bar. Press 1 or 2 to select these items.  
OSD Menu  
Personal preferences  
You can set your personal preferences for  
some of the player features : PICTURE,  
SOUND, LANGUAGE and FEATURE.  
If you have a regular (4:3) TV, select 4:3.  
If you have a 4:3 TV, you can also select  
between:  
Letterbox for a wide-screenpicture with  
black bars top and bottom, or Pan Scan, for  
a full-height picture with the sides  
trimmed. If a disc has Pan Scan, the picture  
then moves (scans) horizontally to keep the  
main action on the screen.  
General operation:  
1 Press OSD MENU on the remote  
control.  
2 Select V in the menu bar.  
The Personal Preferences menu  
appears.  
Use the 1 or 2 / 3 or 4 keys (or DVD  
JOG) to toggle through the menus, sub  
menus and submenu options.  
When a menu item is selected, the  
cursor keys (on the remote control) to  
operate the item are displayed next  
to the item.  
A number of operations can be carried out  
via the menu bar on the screen. The  
following functions are available via the  
menu bar:  
V
Personal preference  
Title/Track  
PAN SCAN  
LETTERBOX  
W
X
Chapter/Index  
Audio language  
Subtitle language  
Angle  
3 Press OK to confirm and return to the  
main menu.  
Y
Z
}
Country  
Select your country. This also is used as  
input for the Parental Controlfeature. (see  
Access Control)  
Note:  
The DVD JOG can only move within one  
direction at a time, either up/down or  
left/right. Press AXIS on the system to  
select the movement direction before  
using DVD JOG.  
a
c
d
Zoom  
Note:  
FTS-Video  
All these items may have to be set  
during Initial Setup. After that, they  
can always be changed in the Personal  
Preferences Menu.  
Sound  
e
f
g
h
Picture by Picture  
Slow motion  
Fast motion  
Time search  
22  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
22  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
The following items can be adapted:  
Karaoke vocal (not available for all  
versions)  
Put this setting to ON only when a  
multi-channel karaoke DVD is being  
played. The karaoke channels on the  
disc will then be mixed into a normal  
stereo sound.  
Sound  
Features  
Picture  
Access Control  
Access Control contains the following  
features:  
Digital output  
TV Shape  
See Initial Setup’  
Factory setting: ALL. This means that  
digital output is switched on. If you are  
not connecting equipment with a digital  
input, change the setting to OFF.  
If your equipment doesnt include a  
digital multi-channel decoder, set the  
digital output to PCM (Pulse Code  
Modulation).  
Child LockWhen Child Lock is set to  
ON, a 4-digit code needs to  
be entered in order to play  
discs.  
Parental controlAllows the  
conditional presentation of  
DVDs containing Parental  
Control information. (see  
Access Control)  
Black level shift (NTSC only)  
Adapts the colour dynamics to obtain  
richer contrasts. Select ON or OFF.  
Speaker  
Allows you to select speaker settings,  
volume balance and delay time and to  
test the speaker settings.  
Speaker settings are only active on the  
Analogue Multi-Channel Output (see  
Appendix - page 30).  
Analogue output  
Select Stereo, Surround, 3D Sound or  
Multichannel.  
Status Window  
Note:  
Displays the current status of the player  
and is displayed with the menu bar.  
When disc playback is stopped, it is  
displayed with the Temporary Feedback  
Fieldin the default screen.  
Video shift  
After selecting the desired Analogue  
Output , if the message appeared on the  
TV OSD and the system display screen  
do not match with the setting, press  
SURROUND CONTROL (or SURR on the  
remote control) until the selected  
setting reached.  
The factory centres the video on your  
screen. Use this setting to personalize  
the position of the picture on your TV by  
scrolling it to the left or right.  
Factory setting is ON. Select OFF to  
suppress display of the Status  
Window.  
Night Mode  
Low power Standby (not applicable  
Optimises the dynamics of the sound  
with low volume playback.  
for this model)  
Language  
PBC (Playback Control)  
The PBC can be set to ON or OFF (only  
applicable for Video CD playback).  
Select the required Menu, Audio and  
Subtitle language. See Initial Setup.  
Audio language and Subtitle language can  
also be adapted via the Menu bar on the  
screen.  
Beeper (not applicable for this model)  
The beeper can be set to ON or OFF.  
23  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
23  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Authorising discs  
Insert the disc. See Loading disc.  
The 'child protect' screen will appear.  
Multi-volume VCDs may have a different Activating/Deactivating Parental  
Access control; child lock  
(DVD and VCD)  
ID for each volume. In order to make the  
complete set child safe, each volume  
has to be authorised.  
Control  
1 When disc playback is stopped, select  
ACCESS CONTROL in the Features  
menu using the 3 or 4 keys.  
2 Enter your 4-digit code. If necessary,  
enter the code a second time.  
Deauthorising discs  
Insert the disc. See Loading disc.  
Playback starts automatically.  
Press Ç while { is visible.  
The | will appear and the disc is  
now deauthorised.  
Activating/deactivating the child lock  
1 When disc playback is stopped, select  
ACCESS CONTROL in the  
features menu using the 3 or 4 keys.  
2 Enter a 4-digit code of your own choice.  
3 Enter the code a second time.  
4 Move to Child lock using the 3 or 4  
keys.  
5 Move to LOCK/UNLOCK icons using  
the 2 key.  
6 Select LOCK icon using the 3 or 4  
keys.  
7 Press OK or 1 to confirm, then press 1  
Access control; Parental  
control (DVD-Video only)  
You will be asked to enter your secret code  
for Play Once or Play Always.If you  
select Play Once, the disc can be played  
as long as it is in the player and the player  
is ON. If you select Play Always, the disc  
will become child safe (authorised) and can  
always be played, even if the Child Lock is  
set to ON.  
3 Move to Parental Control using the 3 or  
Movies on DVDs may contain scenes not  
suitable for children. Therefore, disc may  
contain Parental Controlinformation  
which applies to the complete disc or to  
certain scenes on the disc. These scenes  
are rated from 1 to 8, and alternative, more  
suitable scenes are available on the disc.  
Ratings are country dependent. The  
Parental Controlfeature allows you to  
prevent discs from being played by your  
children or to have certain discs played  
with alternative scenes.  
4 keys.  
Notes:  
The player memory maintains a list of  
50 authorised (Child safe) disc titles. A  
disc will be placed in the list when Play  
Alwaysis selected in the child protect’  
screen. Each time a child safedisc is  
played, it will be placed on top of the  
list. When the list is full and a new disc  
is added, the last disc in the list will be  
removed from the list.  
Double sided DVDs may have a different  
ID for each side. In order to make the  
disc child safe, each side has to be  
authorised.  
again to exit the menu.  
4 Move to VALUE ADJUSTMENT (1-8)  
using the 2 key.  
5 Then use the 3 or 4 keys or the digit  
keys ( 0-9) on the remote control to  
select a rating from 1 to 8 for the disc  
inserted.  
Now unauthorised discs will not be  
played unless the 4-digit code is  
entered.  
8 Select UNLOCK icon to deactivate the  
Child Lock.  
Note:  
Rating 0 (displayed as ‘– –’):  
Parental Control is not activated. The  
Disc will be played in full.  
Confirmation of the 4-digit code is  
necessary when the code is entered for  
the very first time, changed or  
cancelled.  
24  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
24  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Ratings 1 to 8:  
5 Enter the new 4-digit code.  
On this basis, Philips cannot warrant  
functioning of the PARENTAL CONTROL  
system and disclaims any liability of  
unintended watching of disc content.  
Playing a DVD  
The disc contains scenes not suitable for 6 Enter the code a second time and  
Playing a title  
children. If you set a rating for the  
player, all scenes with the same rating  
or lower will be played. Higher rated  
scenes will not be played unless an  
alternative is available on the disc. The  
reconfirm by pressing OK.  
7 Press 1 to exit the menu.  
1 After inserting the disc and closing the  
tray, playback starts automatically.  
The status window and the display  
show the type of disc loaded, as well  
as information about the discs  
contents and playing time.  
The disc may invite you to select an  
item from a menu. If the selections are  
numbered, press the appropriate  
numerical key; if not, use the 1 or 2 /  
3 or 4 keys to highlight your selection,  
then press OK.  
If in doubt, please check the system with  
the disc before you allow children access  
or apply to the relevant disc publisher for  
more information.  
If you forget your 4 digit code  
1 Press 9 to exit Child Protectscreen.  
alternative must have the same rating or 2 Select ACCESS CONTROL in the  
a lower one. If no suitable alternative is  
found, play will stop and the 4-digit  
code has to be entered.  
Features menu using the 3 and 4 keys.  
3 The 4-digit code can be cancelled by  
pressing 9 four times in the Access  
Controldialog.  
4 You can then enter a new code (twice!)  
as described above (Changing the 4 digit  
code).  
Operation  
6 Press OK or 1 to confirm, then press 1  
again to exit the menu.  
Loading discs  
1 Press OPEN/CLOSE 0 on the front of  
the player. The disc tray opens.  
2 Load your chosen disc in the tray, label  
side up (also when a double sided DVD  
is inserted). Make sure it is sitting  
properly in the correct recess.  
3 Gently push the tray, or press OPEN/  
CLOSE 0 to close the tray.  
"READ" appears in the status  
window and on the player display,  
and playback starts automatically.  
Country  
The currently playing title and  
chapter number are shown in the  
menu bar and display.  
1 When disc playback is stopped, select  
ACCESS CONTROL in the Features  
menu using the 3 or 4 keys.  
2 Enter the 4-digit code.  
3 Move to CHANGE COUNTRY using the  
4 key.  
Parental Control Disclaimer  
This DVD player features the PARENTAL  
CONTROL system which is intended to  
activate when playing DVD discs made  
with certain software coding. This is  
according to technical standards adopted  
by the set maker and disc content  
industries.  
The elapsed playing time is shown in  
the status window and the display.  
For model FW-D5 only - If required, you  
can use the SURROUND CONTROL (or  
SURR on the remote control) key to  
select Multichannel, Stereo, Surround or  
3D-Surround. Play may stop at the end  
of the Title, and the player may return to  
the DVD menu. To go on to the next title,  
press 2.  
2 To stop play at any other time, press  
Ç.  
The default screen will appear, giving  
information about the current status  
of the player.  
4 Press the 2 key.  
5 Select a country using 3 or 4.  
6 Press OK or 1 to confirm, then press 1  
again to exit the menu.  
Please note that the PARENTAL CONTROL  
system will not operate if the DVD disc  
does not have the appropriate software  
coding. Also note that at the time of  
release of this DVD player, certain aspects  
of the said technical standards had not  
been fully settled among the set maker and  
the disc content industries.  
Notes:  
If Child Lockis set to ON and the disc  
inserted is not in the child safelist (not  
authorised), the 4-digit code must be  
entered and/or the disc must be  
authorised. (see Access Control)  
The DVD tray will open or close only  
when the system is in DVD mode.  
Changing the 4-digit code  
1 When disc playback is stopped, select  
ACCESS CONTROL in the Features  
menu using the 3 or 4 keys.  
2 Enter the old code.  
3 Move to CHANGE CODE using the 4  
key.  
4 Press the 2 key.  
25  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
25  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
You can RESUME play from the point at  
which you stopped play. Press 2 (PLAY);  
when you see the RESUME icon . on  
the screen, press 2 (PLAY) again.  
The RESUME feature applies not only  
to the disc in the player, but also to  
the last four discs you have played.  
Simply reload the disc, press  
Note:  
Moving to another chapter/index  
When a title has more than one chapter or  
a track has more than one index (which you  
can see from the display and on the menu  
bar), move to another chapter/index as  
follows:  
Playing a VCD  
When PBC mode is switched on,  
RESUME play is not available.  
Playing a disc  
1 After inserting the disc and closing the  
tray, playback starts automatically.  
The status window and the display  
show the type of disc loaded, as well  
as information about the discs  
contents and playing time.  
The disc may invite you to select an  
item from a menu. If the selections are  
numbered.  
The currently playing track number is  
shown in the menu bar and the  
display. The elapsed playing time is  
shown in the status window and the  
display.  
For model FW-D5 only - If required, you  
can use the SURROUND CONTROL (or  
SURR on the remote control) key to  
select Multichannel, Stereo, Surround or  
3D-Surround.  
2 To stop play at any time, press Ç.  
The default screen will then appear.  
You can RESUME play from the point at  
which you stopped play. Press 2 (PLAY);  
when you see the RESUME icon . on  
the screen, press 2 (PLAY) again.  
The RESUME feature applies not only  
to the disc in the player, but also to  
the last four discs you have played.  
Simply reload the disc, press  
General features  
Note:  
1 Select X (CHAPTER/INDEX) in the menu  
bar.  
2 Press ë briefly during play to select  
Unless stated otherwise, all operations  
described are based on remote control  
operation. A number of operations can  
also be carried out via the menu bar on  
the screen.  
2 (PLAY); when you see the RESUME  
icon . on the screen , press  
2 (PLAY) again.  
the next chapter/index.  
Press í briefly during play to return to  
the beginning of the current chapter/  
index. Press í twice briefly to step  
back to the previous chapter/index.  
To go directly to any chapter or index,  
enter the number using the digit keys  
(0-9).  
Note:  
Since it is usual for DVD movies to be  
released at different times in  
different regions of the world, all  
players have region codes. Discs can  
have an optional region code. If you load  
a disc of a different region code into  
your player, you will see the region code  
notice on the screen. The disc will not  
play and should be removed from the  
player.  
Moving to another title/TRACK  
When a disc has more than one title or  
track (which you can see from both the  
menu bar and the display), you can move to  
another title/track as follows:  
3 To exit, press 1 or 2.  
1 Select W (TITLE/TRACK) in the menu  
bar.  
2 Press ë briefly during play to select  
Note:  
If the number has more than one digit,  
press the keys in rapid succession.  
the next title/track.  
Press í briefly during play to return to  
the beginning of the current title/track.  
Press í briefly again to step back to  
the previous title/track.  
3 To exit, press 1 or 2.  
2 (PLAY); when you see the RESUME  
icon . on the screen , press  
2 (PLAY) again.  
26  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
26  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Still Picture and Frame-by-frame  
playback  
1 Select e (PICTURE BY PICTURE) in  
the menu bar.  
2 Use the 4 key to enter the picture by  
picture menu.  
The player will go into PAUSE mode.  
3 Use the cursor keys 1 or 2 to select the  
previous or next picture frame.  
4 To exit Picture by picture mode, press  
2 (PLAY) or 3 on the remote control.  
REPEAT TITLE appears on the display.  
To repeat the entire disc, press REPEAT  
a third time.  
REPEAT appears on the display.  
To exit Repeat mode, press REPEAT a  
fourth time.  
Shuffle  
4 Press OK to confirm the start time.  
The time edit box will disappear and  
play starts from the selected  
time position on the disc.  
DVDs  
This shuffles the playing order of chapters  
within a title, if the title has more than one  
chapter.  
Press SHUFFLE during play.  
SHUFFLE appears on the screen for  
about two seconds.  
Zoom  
The Zoom function allows you to enlarge  
the video image and to pan through the  
enlarged image.  
Video-CDs - Repeat track/disc  
To repeat the track currently playing,  
press REPEAT.  
REPEAT TRACK appears on the display.  
To repeat the entire disc, press REPEAT  
a second time.  
REPEAT appears on the display.  
To exit Repeat mode, press REPEAT a  
third time.  
To return to normal play, press  
SHUFFLE again.  
1 Select a (ZOOM) in the menu bar.  
2 Press 3 or 4 to activate the ZOOM  
function and select the required zoom  
factor: 1.33 or 2 or 4.  
The player will go into PAUSE mode.  
The selected zoom factor appears  
below the Zoom icon in the  
menu bar and Press OK to pan’  
appears below the menu bar.  
The picture will change accordingly.  
3 Press OK to confirm the selection.  
The panning icons appear on the  
screen: 1 or 2 / 3 or 4 and OK.  
4 Use the 1 or 2 / 3 or 4 keys to pan  
across the screen.  
5 When OK is pressed only the zoomed  
picture will be shown on the screen.  
6 If you wish to zoom at any moment,  
press a (ZOOM) and select the  
required zoom factor as described  
above.  
VCDs  
Search  
This shuffles the playing order of the  
tracks, if the disc has more than one track.  
Press SHUFFLE during play.  
SHUFFLE appears on the screen for  
about two seconds.  
To return to normal play, press  
SHUFFLE again.  
1 Select g (FAST MOTION) in the menu  
bar.  
2 Use the 4 keys to enter the Fast Motion  
menu.  
3 Use the 1 or 2 keys to select the  
required speed: -32, -8 or -4  
(backward), or +4, +8, +32 (forward).  
4 Select 1 to play at normal speed again.  
5 To exit Fast Motion mode, press  
2 (PLAY) or 3 on the remote control.  
Repeat A-B  
To repeat a sequence in a title:  
Press Repeat A-B at your chosen  
starting point;  
A- appears briefly on the screen.  
Press Repeat A-B again at your chosen  
end point;  
A-B repeat appears briefly on the display,  
and the repeat sequence begins.  
To exit the sequence, press Repeat A-B.  
Time search  
The Time Search function allows you to start  
playing at any chosen time on the disc.  
To search forward or backward through  
different speeds, you can also hold down  
à or á.  
1 Select h (TIME SEARCH) in the menu  
bar.  
2 Press 4.  
The player will go into PAUSE mode.  
A time edit box appears on the  
screen, showing the elapsed playing  
time of the current disc.  
3 Use the digit keys ( 0-9) to enter the  
required start time. Enter hours, minutes  
and seconds from right to left in the box.  
Each time an item has been entered,  
the next item will be highlighted.  
Repeat  
Scan  
DVD-Video Discs - Repeat chapter/  
title/disc  
Plays the first 10 seconds of each chapter/  
index on the disc.  
Press SCAN.  
To continue play at your chosen chapter/  
index, press SCAN again or press  
2 (PLAY) on the remote control.  
7 To exit Zoom mode, press 2 (PLAY),Ç  
or OSD MENU.  
If you press 2 (PLAY), playback will  
resume.  
To repeat the chapter currently playing,  
press REPEAT.  
REPEAT CHAPTER appears on the display.  
To repeat the title currently playing,  
press REPEAT a second time.  
27  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
27  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
FTS-Video  
3 Press OK if you wish to store the entire  
title/track.  
The title/track number will be added  
to the list of selections.  
When your FTS Program is complete, press  
É(PLAY) to start play, or Ç to go back to  
Stop mode. In either case, the FTS Program  
will be automatically memorised.  
Disc menu  
1 Select W (TITLE/TRACK) in the menu  
bar, then press DVD MENU.  
The disc menu is displayed.  
To remove the disc menu, select W  
(TITLE/TRACK) in the menu bar, then  
press DVD MENU again.  
The FTS-Video function allows you to  
store your favourite titles and chapters  
(DVD) and favourite tracks and indexes  
(VCD) for a particular disc in the player  
memory.  
Each FTS programme can contain 20  
items (titles, chapters).  
Each time an FTS programme is played  
it will be placed on top of the list. When  
the list is full and a new programme is  
added, the last programme in the list  
will be removed from the list.  
The selections can be played at any time.  
For VCD, FTS programme is not available  
whenever PBC mode is switched on.  
Storing chapters/indexes  
1 Press 4 on the selected title/track  
number.  
The title/track number will be marked  
and the highlight moves to the first  
available chapter/index number for  
this title/track.  
Special DVD-features  
Checking the contents of DVD : Menus  
For titles and chapters, selection menus  
may be included on the disc. The DVDs  
menu feature allows you to make  
Camera Angle  
If the disc contains sequences recorded  
from different camera angles, the angle  
icon appears, showing the number of  
available angles and the angle being  
shown currently. You can then change the  
camera angle if you wish.  
selections from these menus.  
2 Use 1 or 2 to select the required  
chapter/index number.  
Press the appropriate digit keys (0-9);  
or use the 1 or 2 / 3 or 4 keys to  
highlight your selection, then press OK.  
3 Press OK to confirm the selection.  
The title-chapter/track-index selection  
will be added to the list of selections.  
4 Press OSD MENU to exit the FTS-  
Video c menu.  
1 Select } (ANGLE) in the menu bar.  
2 Use the 3 or 4 keys to select the  
required angle in the angle icon.  
After a small delay, play changes to  
the selected angle. The angle icon  
remains displayed until multiple  
angles are no longer available.  
Title menus  
1 Press DVD MENU.  
If the current title has a menu, the  
menu will appear on the  
screen. If no menu is present in the  
title, the disc menu will be  
displayed.  
2 The menu can list camera angles,  
spoken language and subtitle options,  
and chapters for the title.  
3 To remove the title menu, press DVD  
MENU again.  
Erasing a FTS-Video Program  
1 In STOP mode, select FTS-Video c in  
the menu bar.  
2 Use 4 to select PROGRAM.  
3 Use 1 or 2 to select the required  
selection number.  
Storing a FTS-Video Program  
1 In STOP mode, select FTS-Video c in  
the menu bar.  
2 Press 4 to open the menu.  
The FTS-Video menu appears.  
4 Press OK to erase the selection.  
5 Press OSD MENU to exit.  
Changing the audio language  
1 Select Y (AUDIO) in the menu bar or  
press AUDIO on the remote control.  
2 Press 3 or 4 repeatedly to see the  
different languages.  
If you wish to erase all selections:  
1 In STOP mode, select FTS-Video c in  
the menu bar.  
Storing titles/tracks  
2 Use 4 to select CLEAR ALL.  
3 Press OK.  
All selections will now be erased.  
4 Press OSD MENU to exit.  
1 Press 4 to select TITLES/TRACK.  
2 Use 1 or 2 to select the required title/  
track.  
28  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
28  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Subtitles  
Notes:  
Pause  
Repeat A-B  
To repeat a sequence:  
1 Select Z (SUBTITLE) in the menu bar.  
2 Press 3 or 4 repeatedly to see the  
different subtitles.  
When PBC menu consists of more than  
one page, use í or ë keys to go  
through the pages.  
Press ; during play.  
To return to play, press 2 (PLAY).  
Press Repeat A-B at your chosen  
starting point;  
When PBC mode is switched on,  
RESUME play, Repeat A-B, SCAN and  
SHUFFLE are not functional.  
Moving to another track  
Press ë briefly during play to go to the  
next track.  
Press í briefly during play to return to  
the beginning of the current track. Press  
í briefly again to step back to the  
previous track.  
A- appears briefly on the player  
display.  
Press Repeat A-B again at your chosen  
end point;  
A-B appears briefly on the display,  
and the sequence begins to play  
repeatedly.  
Playing an audio CD  
Special VCD-Features  
Playback Control (PBC)  
To go directly to any track, enter the  
track number using the digit keys (0-9).  
To exit the sequence, press Repeat A-B  
again.  
PBC ON  
1 Load a Video CD with PBC and press  
PBC to switch on PBC mode.  
2 Press 2(PLAY).  
Shuffle  
Scan  
Press SHUFFLE during play.  
The order of the tracks is changed.  
To return to normal play, press  
SHUFFLE again.  
Plays the first 10 seconds of each track on  
the disc.  
Press SCAN.  
To continue play at your chosen track,  
press SCAN again or press 2 (PLAY).  
The PBC menu appears on the TV  
screen.  
Go through the menu with the keys  
indicated on the TV screen until your  
chosen passage starts to play. If a PBC  
menu consists of a list of titles, you can  
select a title directly.  
Repeat track/disc  
To repeat the track currently playing,  
press REPEAT.  
REPEAT TRACK appears on the display.  
To repeat the entire disc, press REPEAT  
a second time.  
REPEAT appears on the display.  
To exit Repeat mode, press REPEAT a  
third time.  
FTS (Favourite Track Selection)  
The FTS feature allows you to store your  
favourite tracks for a particular disc in  
the player memory.  
Each FTS programme can contain 20  
tracks.  
Each time an FTS programme is played it  
will be placed on top of the list. When  
the list is full and a new programme is  
added, the last programme in the list  
will be removed from the list.  
The selections can be played at any  
time.  
1 After loading the disc, playback starts  
automatically.  
If the TV is on, the Audio CD screen  
appears.  
The number of tracks and the total  
playing time will be shown on the  
screen and on the player display.  
During play, the current track number  
and its elapsed playing time will be  
shown on the screen and on the  
player display.  
2 Playback will stop at the end of the disc.  
To stop play at any other time, press  
Ç.  
3 Enter your choice with the digit keys  
(0-9).  
4 Press RETURN to go back to the  
previous menu.  
When PBC OFF  
1 Press PBC to switch off PBC mode.  
2 Playback will resume when press  
2 (PLAY).  
The PBC menu does not appear on  
the TV screen.  
29  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
29  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
Switching FTS ON/OFF  
1 Use 3 or 4 to move to the top.  
2 Use 1 or 2 to select either ON or OFF.  
Subwoofer  
On:  
Off:  
Appendix  
When you connect a subwoofer  
When the subwoofer is not  
connected.  
6 Channel settings  
Front speakers  
L (Large): When the front speakers can  
reproduce low frequency  
signals below 120Hz  
S (Small): When the front speakers  
cannot produce low frequency  
signals below 120Hz  
Erasing a track from an FTS-  
programme  
1 Use 4 to go to the list of selected  
tracks in programme.  
2 Use 1 or 2 to select the track number  
you wish to erase.  
3 Press OK.  
The track number will be erased from  
the list of selected tracks.  
* You can use your TV as centre speaker.  
When centre speaker is turned on, the  
audio L/R as well as the audio from the  
scart will contain the centre speaker  
audio.  
Center  
speaker  
Centre speaker*  
Storing an FTS Program  
L (Large): When the centre speaker can  
reproduce low frequency  
1 Load a disc and stop playback.  
2 Use 4 to go to the list of available  
tracks.  
3 Use 1 or 2 to select tracks from the list.  
To go directly to any track, enter the  
track number using the digit keys (0-9).  
4 Store each track by pressing OK.  
The track numbers will be added to  
the list of selected tracks.  
The number of tracks and the playing  
time of the programme will be  
shown on the screen and the player  
display.  
Erasing the complete programme  
Use 4 to select CLEAR ALL and press  
OK.  
The complete FTS programme for the  
disc will be erased.  
Front speaker  
left  
Front speaker  
right  
TV  
signals below 120Hz  
S (Small): When the centre speaker  
cannot produce low frequency  
signals below 120Hz  
Off:  
When the centre speaker is not  
connected.  
Rear speaker  
(left surround)  
Rear speaker  
(right surround)  
Surround speakers  
Delay times  
L (Large): When the surround speakers  
can reproduce low frequency  
signals below 120Hz  
S (Small): When the surround speakers  
cannot produce low frequency  
signals below 120Hz  
The DVD player is set to reproduce  
correctly synchronised Digital Surround  
Sound in a listening area where the  
surround speakers are about 150cm nearer  
to the listening position than the front  
speakers, and the centre speaker is in line  
with the front speakers. To adjust for other  
listening area arrangements, certain delay  
times required.  
When your FTS Program is complete, press  
É(PLAY) to start play, or Ç to go back to  
Stop mode. In either case, the FTS Program  
will be automatically memorised.  
Off:  
When the surround speakers  
are not connected.  
30  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
30  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD-VIDEO  
7 Adjust the MIC LEVEL control.  
8 Adjust ECHO -/+ ( j ) to the level  
you desire.  
9 Adjust KEY CONTROL -/+ ( k ) to  
change the key of your vocal range.  
10 Select the different MODE SELECTION  
l you desire. (see Karaoke General  
Features).  
11 Shift to VOCAL m to fade out the  
original vocal from a karaoke disc.  
When you start singing or talking  
through the microphone, the original  
vocal will fade out automatically.  
12 Shift to VOCAL CANCEL to cancel out  
the original vocal from the sound.  
13 Press KARAOKE button to exit the  
menu screen.  
Vocal ( m )  
Available options for vocal are:.  
General features  
Setting up Karaoke (in DVD  
mode only)  
Karaoke ON/OFF ( i )  
ON  
normal mode, all music  
and vocals are played.  
To switch karaoke features ON/OFF  
mode.  
CANCEL cancel original vocals.  
FADE  
removes original vocals  
when you start singing  
through the microphone.  
Echo -/+ ( j )  
MIC LEVEL  
Can be adjusted in the range of  
{0.....+7).  
MIC  
Key Control -/+ ( k )  
Can be adjusted in the range of  
{-7 ......0.....+7).  
(not available for all versions)  
1 Load a karaoke disc into the player.  
2 Set the MIC LEVEL control to the  
minimum level to prevent acoustic  
feedback (e.g. loud howling sound)  
before connecting the microphone.  
3 Connect a microphone to MIC socket.  
4 Press 2 (PLAY) to start playback.  
5 Press KARAOKE on the remote  
control to switch on the Karaoke mode.  
6 Karaoke menu bar appears.  
Mode Selection ( l )  
Works correctly only on karaoke disc.  
Only two channels are available.  
For VCD Karaoke disc,  
Selection between L+R / L / R  
L+R -  
L -  
R -  
Left + Right  
Left  
Right  
For DVD Karaoke disc,  
Selection between M1 / M2 / V1 / V2  
M1 -  
M2 -  
V1 -  
V2 -  
All channels  
Move to the function you want to  
change using 3 or 4 keys then use  
1 or 2 keys to scroll to your  
Music channels only  
Vocal 1 output  
Vocal 2 output  
preferred option.  
Note:  
In the karaoke disc, karaoke L, R, M1,  
M2, V1, V2 are recorded. In some  
discs, the M1, M2, V1, V2 may not be  
recorded in the disc.  
31  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
31  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
Discs for playback  
CD Direct Play  
DISC CHANGE  
OPENCLOSE  
This system can play all digital audio CD,  
finalised digital audio CD-Recordable and  
finalised digital audio CD-Rewritable  
format discs.  
You can play a CD directly by pressing  
the CD 1, CD 2 or CD 3 button. The CD  
player will stop at the end of playback of  
the selected disc.  
CD 1  
CD 2  
CD 3  
CD  
3
C H A N G E R  
A lit button indicates that a disc is  
loaded in the disc tray.  
The selected disc is encircled.  
DVD MINI HIFI SYSTEM  
STANDBY  
ON  
N
LEFT  
CENTER RIGHT  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
SURR CHANNEL SURR  
IR SENSOR  
Playing a CD  
R
Loading the CD Changer  
1 Press CD to select CD mode.  
2 Press OPENCLOSE.  
The CD carousel tray slides out.  
3 Load a CD with the printed side up in  
the right tray.  
You can load another disc in the left  
tray.  
SURROUND CONTROL  
5.1CH  
/
STEREO  
/
SURR  
/
3D  
1 Press 2 (PLAY) to start playback.  
The disc tray, track number and  
elapsed playing time of the current  
track appear on the display.  
To interrupt playback, pressÅ.  
The playing time flashes.  
To resume playback, press 2 (PLAY)  
again.  
VCD CD  
DVD  
CD 1 2 3  
BAND  
TUNER  
CDR  
AUX  
CD  
O
R
E
PRESET  
SEARCHTUNING  
STOPCLEAR PLAY PAUSE  
PREV SIDE NEXT  
V
VOLUME  
CLOCK/  
TIMER  
PROG  
DIM  
DVD  
DVD  
MENU  
AXIS  
OK  
DVD JOG  
SOUND JOG  
To load the third disc, press the DISC  
CHANGE button.  
2 To stop playback, press Ç.  
The CD carousel will rotate until the  
empty tray is ready for loading.  
4 Press OPENCLOSE to close the CD  
carousel tray.  
The total number of tracks and the  
playing time of the selected disc  
appear on the display.  
Notes:  
Warning!  
All the available discs will play once,  
then stop.  
When the CD has stopped playing, the  
system will switch to standby mode  
after 30 minutes if no button is pressed.  
1) This system is designed for conventional CDs. Do not use any accessories  
such as disc stabilizer rings or CD treatment sheets, etc., which may damage  
the CD mechanism.  
2) Do not load more than one disc into each tray.  
3) When the CD carousel tray is loaded with CDs, do not turn over or shake the  
system. This may jam the changer.  
Note:  
You may load three discs in the CD carousel tray for continuous playback without  
interruption.  
To ensure good system performance,  
wait until the CD changer completely  
reads the disc(s) before proceeding.  
32  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
32  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
Selecting a desired track during  
playback  
Press í or ë (or Digit 0-9 on the  
remote control) until the desired track  
appears on the display.  
The selected track number and  
elapsed playing time appear on the  
display.  
If you press í once it will skip to the  
beginning of the current track and play  
the track again.  
If the system is reading the disc,  
programming is not possible,  
"READING" will be displayed and  
followed by "DISC X" "X" is the  
current read disc number.  
During programming, if no button is  
pressed within 20 seconds, the system  
will exit programme mode  
Disc Change  
You can change the outer two discs while  
the third inner disc is stopped or is playing.  
Programming Tracks  
Programming tracks of a loaded CD is  
possible when playback is stopped. The  
display will indicate the total tracks stored  
in the programme. Up to 40 tracks can be  
stored in the memory in any order. When  
40 tracks are stored and you attempt to  
store another track, the display will show  
"PROGRAM FULL".  
1 Press DISC CHANGE.  
The CD carousel tray slides out.  
2 Replace the discs in the left and right  
disc trays.  
If you wish to change the inner disc  
during playback, press DISC CHANGE  
again.  
"DISC CHANGE" will be displayed.  
The CD will stop playing.  
The CD carousel tray will close to  
retrieve the inner CD then open again  
with the inner CD accessible.  
3 Press OPENCLOSE to close the CD  
carousel tray.  
automatically.  
1 Load the desired discs in the disc trays.  
2 Press PROG to start programming.  
The PROG starts flashing.  
3 Press the CD (CD 123) or CD 1/2/3  
button to select the disc.  
4 Press í or ë (or Digit 0-9 on the  
remote control) to select the desired  
track.  
5 Press PROG to store the track.  
Repeat steps 3 to 5 to store other discs  
and tracks.  
6 Press Ç once to end programming.  
The total number of tracks  
programmed and total playing time  
appear on the display.  
Reviewing the programme  
Reviewing of the programme is possible  
only when playback is stopped.  
1 Press í or ë repeatedly to review  
the programmed tracks.  
Note:  
Pressingí during shuffling can only  
skip to the beginning of the current  
track.  
2 Press Ç once to exit review mode.  
Searching for a particular  
passage during playback  
Press and hold à or á until the  
desired passage is located.  
The volume will be reduced.  
Play returns to normal when à or á  
is released.  
Playing the programme  
1 Press 2 (PLAY) to start programme  
playback.  
"PLAY PROGRAM" will be  
displayed.  
The track number and elapsed  
playing time of the current track will  
appear on the display.  
If you press REPEAT during programme  
playback, the current track or all  
programmed tracks will be played  
repeatedly.  
"TRACK" or "PROGRAM" will be  
displayed.  
Selecting a desired track  
Selecting a desired track when  
playback is stopped  
1 Press í or ë (or Digit 0-9 on the  
remote control) until the desired track  
appears on the display.  
2 Press 2 (PLAY) to start playback.  
The selected track number and  
elapsed playing time appear on the  
display.  
Notes:  
If the total playing time is more than  
"99:59" or if one of the programmed  
tracks has a number greater than 30,  
then "--:--" appears on the display  
instead of the total playing time.  
The REPEAT and PROG appear on the  
display.  
33  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
33  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
2 Press Ç to stop programme playback.  
Shuffle (only on remote control)  
Repeat (only on remote control)  
You can play the current track, a disc or all  
available discs repeatedly.  
Notes:  
In shuffle mode, the system plays all the  
available discs and their tracks in random  
order. Shuffle may be used also when  
tracks are programmed.  
If you press any of the CD DIRECT PLAY  
buttons, the system will play the  
selected disc or track and the stored  
programme will be ignored temporarily.  
The PROG display also will disappear  
temporarily from the display. It will  
reappear when playback of the selected  
disc ends.  
1 Press REPEAT on the remote control to  
select the various repeat modes.  
"TRACK", "DISC", "ALL DISC" or  
"OFF" will be displayed.  
The REPEAT appears on the display.  
The selected track, selected disc or all  
available discs will now be played  
repeatedly until you press Ç.  
2 Press REPEAT until the "OFF" mode is  
displayed to resume normal playback.  
The REPEAT disappears from the  
display.  
To shuffle all the discs and tracks  
1 Press SHUFFLE.  
"SHUFFLE" will be displayed.  
The SHUFFLE, the disc and the track  
selected at random appear on the  
display.  
The discs and the tracks will be played  
in random order until you press Ç.  
If you press REPEAT during shuffling,  
the current track or all available discs  
will be played repeatedly.  
"TRACK" or "ALL DISC" will be  
displayed.  
The REPEAT and SHUFFLE appear on the  
display.  
2 Press SHUFFLE again to resume normal  
playback.  
The SHUFFLE disappears from the  
display.  
REPEAT DISC mode is not available  
when programme playback begins.  
Erasing the programme (when  
playback is stopped)  
Press Ç.  
"PROGRAM CLEARED" will be  
displayed.  
Notes:  
REPEAT DISC mode is not available  
during programme play or shuffle mode.  
You can also repeat shuffling a  
programme.  
"TRACK" or "PROGRAM" will be  
displayed.  
Note:  
The programme will be erased when the  
system is disconnected from the power  
supply or when the CD carousel tray is  
opened.  
The REPEAT, PROG and SHUFFLE appear  
on the display.  
Note:  
REPEAT DISC mode is not available  
when shuffle is selected.  
34  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
34  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER  
If you want to reserve a section of  
Storing Preset Stations  
DVD MINI HIFI SYSTEM  
preset numbers, for example preset  
numbers 1 to 9, select preset 10 before  
starting automatic programming, only  
the preset numbers 10 to 40 will be  
programmed.  
STANDBY  
ON  
N
You can store up to 40 radio stations in the  
memory. When a preset radio station is  
selected, the preset number appears next  
to the frequency on the display.  
LEFT  
CENTER RIGHT  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
SURR CHANNEL SURR  
IR SENSOR  
R
SURROUND CONTROL  
5.1CH  
/
STEREO  
/
SURR  
/
3D  
VCD CD  
CD 1 2 3  
BAND  
TUNER  
CDR  
DVD  
CD  
AUX  
Automatic programming  
1 Press TUNER (BAND).  
O
PRESET  
SEARCHTUNING  
STOPCLEAR PLAY PAUSE  
PREV SIDE NEXT  
Manual programming  
1 Press TUNER (BAND).  
VOLUME  
2 Press PROG for more than one second.  
The PROG starts flashing and "AUTO"  
will be displayed.  
The system will search for every  
available radio station in the FM  
waveband first, then search the MW  
waveband.  
All available radio stations will be  
stored automatically. The frequency  
and preset number will be displayed  
briefly.  
The system will stop searching when  
all the available radio stations are  
stored or when the memory for 40  
preset radio stations is used.  
The system will remain tuned to the  
last stored preset radio station.  
CLOCK/  
TIMER  
PROG  
DIM  
2 Press TUNER (BAND) again to select  
the desired waveband : FM or MW.  
3 Press PROG for less than one second.  
The PROG starts flashing.  
The next available preset number will  
be displayed for selection.  
DVD  
DVD  
MENU  
AXIS  
OK  
DVD JOG  
SOUND JOG  
4 Press à or á to tune to the desired  
frequency.  
Note:  
Repeat this procedure until the desired  
radio station is reached.  
To tune to a weak radio station, briefly  
press à or á repeatedly until the  
display shows the desired frequency  
and/or when the best reception has  
been obtained.  
For 'EASY SET' feature, please refer to  
If you wish to store the radio station to  
another preset number, press í or ë  
(or Digit 0-9 on the remote control) to  
select the desired preset number.  
5 Press PROG again.  
The PROG disappears and the radio  
station will be stored.  
Repeat steps 3 5 to store other preset  
page 14.  
Tuning to radio stations  
1 Press TUNER (BAND) to select TUNER  
mode.  
"TUNER" will be displayed.  
A few seconds later, the current radio  
frequency will be displayed.  
radio stations.  
2 Press TUNER (BAND) again to select  
the desired waveband : FM or MW.  
3 Press à or á for more than one  
second, then release.  
The display will show "SEARCH"  
until a radio station with sufficient  
signal strength is found.  
Notes:  
Notes:  
You can cancel the automatic  
programming by pressing PROG orÇ  
(on the system only).  
When 40 radio stations are stored and  
you attempt to store another radio  
station, the display will show  
"PROGRAM FULL". If you want to  
change an existing preset number,  
repeat steps 3 5.  
35  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
35  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER  
You can cancel manual programming by  
pressing Ç (on the system only).  
During programming, if no button is  
pressed within 20 seconds, the system  
will exit programme mode  
Changing the MW tuning grid  
.
(not available for version /30)  
The frequency step can be changed if  
necessary. In North and South America, the  
frequency step between adjacent channels  
in the MW band is 10 kHz. In other parts of  
the world, it is 9 kHz. The frequency step  
presetted in the factory is 9 kHz.  
automatically.  
Tuning to Preset Radio  
Stations  
Press í or ë (or Digit 0-9 on the  
remote control) to select the desired  
preset number.  
For MW band  
To change from 9 kHz to 10 kHz or vice  
versa  
Changing of tuning grid will erase all  
previously stored preset stations.  
The preset number, radio frequency,  
and waveband appear on the display.  
1 Disconnect the system from the AC  
power supply (pull out the AC power  
cord).  
2 Press TUNER and TUNING á  
depressed while reconnecting the  
system to the AC power supply.  
Display will show "GRID 9" or  
"GRID 10".  
Notes:  
GRID 9 indicates that the tuning grid is  
in step of 9 kHz in MW band. GRID 10  
indicates that the tuning grid is in step  
of 10 kHz in MW band.  
FM tuning grid will also be changed  
from 50 kHz to 100 kHz or vice versa.  
All preset radio stations will also be  
erased.  
36  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
36  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUX/CDR  
CLOCK  
DVD MINI HIFI SYSTEM  
DVD MINI HIFI SYSTEM  
STANDBY  
ON  
STANDBY  
ON  
N
N
LEFT  
CENTER RIGHT  
LEFT  
CENTER RIGHT  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
FTS TITLE  
P1  
CHAP.  
FM LW  
A
M
W
SLEEP DIM TIMER  
P5 P6  
P2  
P3  
P4  
P2  
P3  
P4  
SURR CHANNEL SURR  
SURR CHANNEL SURR  
IR SENSOR  
IR SENSOR  
R
R
SURROUND CONTROL  
SURROUND CONTROL  
5.1CH  
/
STEREO  
/
SURR  
/
3D  
5.1CH  
/
STEREO  
/
SURR  
/
3D  
VCD CD  
CD 1 2 3  
BAND  
TUNER  
CDR  
VCD CD  
CD 1 2 3  
BAND  
TUNER  
CDR  
DVD  
CD  
AUX  
DVD  
CD  
AUX  
O
O
PRESET  
PRESET  
SEARCHTUNING  
STOPCLEAR PLAY PAUSE  
PREV SIDE NEXT  
SEARCHTUNING  
STOPCLEAR PLAY PAUSE  
PREV SIDE NEXT  
VOLUME  
VOLUME  
CLOCK/  
TIMER  
CLOCK/  
TIMER  
PROG  
DIM  
PROG  
DIM  
DVD  
DVD  
DVD  
MENU  
DVD  
MENU  
AXIS  
OK  
AXIS  
OK  
DVD JOG  
SOUND JOG  
DVD JOG  
SOUND JOG  
Notes:  
Selecting External Equipment  
View Clock  
Clock Setting  
There are two Auxiliary modes:  
i. the normal AUX mode.  
ii. the CDR mode, where the LINE OUT  
of this mini system is muted. You will  
not be able to record or listen to the  
sound from the LINE OUT.  
You are advised not to listen to and  
record from the same source  
simultaneously.  
If you have connected the audio out  
terminals of the external equipment (TV,  
VCR, Laser Disc player, DVD player, or CD  
Recorder) to the AUX/CDR IN terminals,  
you can hear the enhanced sound from the  
system.  
You can view the clock (if it is set) if the  
system is in Standby mode or when any  
sound source is selected (CD, TUNER, etc.).  
The clock will be displayed for about seven  
seconds.  
The clock can be set in either 12- or 24-  
hour mode, e.g. "AM 12:00" or  
"00:00". Before setting the clock, you  
must be in the View Clock mode.  
1 Press CLOCK/TIMER to select clock  
mode.  
Press CLOCK/TIMER briefly.  
"PM 10:38 or 22:38" (the  
current time) will be displayed  
depending on whether you have  
selected 12- or 24-hour mode.  
"--:--" will be displayed if the  
clock is not set.  
1 Press AUX (CDR) to select the CDR  
mode.  
"CDR" will be displayed.  
2 Press AUX (CDR) again to select  
external (normal AUX) mode.  
"AUX" will be displayed.  
2 Press PROG (on the system only) to  
select 12- and 24- hour mode.  
If 12-hour mode is selected,  
"AM 12:00" starts flashing.  
If 24-hour mode is selected, "00:00"  
starts flashing.  
All the sound control features (e.g. DSC,  
DBB, etc.) are available for selection.  
3 Set the hour with à or á on the  
system.  
4 Set the minute with í or ë on the  
system.  
37  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
37  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER  
5 Press CLOCK/TIMER again to store the  
setting.  
The clock starts.  
To exit without storing the setting, press  
Ç on the system.  
5 Press CLOCK/TIMER to store the start  
time.  
The timer is now set.  
The TIMER remains on the display.  
At the preset time, the timer will be  
activated.  
Timer Setting  
The system can switch on to CD or  
TUNER mode automatically at a preset  
time. It can serve as an alarm to wake  
you up.  
Notes:  
Before setting the timer, make sure the  
clock is set correctly.  
The timer will always be switched on  
once it is set.  
The selected source will be played.  
During clock setting, if no button is  
pressed within 90 seconds, the system  
will exit clock setting mode  
automatically.  
When a power interruption occurs, the  
clock setting is erased.  
Notes:  
During timer setting, if no button is  
pressed within 90 seconds, the system  
will exit timer setting mode  
The volume of the timer will  
increase from the minimum level  
until the volume level before the set  
is switched to standby mode.  
automatically.  
If the source selected is TUNER, the last  
tuned frequency will be switched on.  
If the source selected is CD, playback  
will begin with the first track of the  
selected disc or programme. If the CD  
trays are empty, TUNER will be selected  
instead.  
1 Press and hold CLOCK/TIMER for more  
than 2 seconds to select timer mode.  
"AM 12:00" or "00:00" or the last  
timer setting starts flashing  
depending on whether you have  
selected 12- or 24-hour mode.  
The TIMER starts flashing.  
The selected source is lit while other  
available sources are flashing.  
2 Press CD or TUNER to select the  
desired source.  
To switch off the TIMER  
Press TIMER on the remote control.  
The timer is now switched off.  
The display will show "CANCEL"  
and the TIMER disappears.  
Before selecting CD, make sure a CD is  
loaded in the CD tray.  
3 Press à or á on the system to set  
the hour for the timer to start.  
4 Press í or ë on the system to set  
the minute for the timer to start.  
To start the TIMER again (for the same  
preset time and source)  
Press TIMER on the remote control.  
The timer is now on.  
The TIMER appears on the display.  
38  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
38  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
S-Video output ......................................... Y: 1 Vpp (75 Ω)  
SURROUND SPEAKERS (FW-D5)  
Specifications  
System ........................................................ closed satellite  
Impedance .................................................................... 6 Ω  
Speaker Driver ........................................... 1 x 3full range  
Dimensions (w x h x d) ..................... 230 x 130 x 155 (mm)  
Weight .............................................................. 1.2 kg each  
............................................................. C: 0.3 Vpp (75 Ω)  
AMPLIFIER  
Output power  
CD PLAYER  
FW-D5 ......................... 3000 W PMPO / 2 x 50 W RMS(1)  
Left/Right Channel ........................... 2 x 50 W RMS(1)  
Centre Channel ........................................... 50 W, 6 Ω  
Surround Channel ................................. 2 x 50 W, 6 Ω  
FW-D1 ......................... 1200 W PMPO / 2 x 50 W RMS(1)  
Signal-to-noise ratio .................................... 75 dBA (IEC)  
Frequency response ......................... 20 20000 Hz, 3 dB  
Input sensitivity  
Number of programmable tracks .................................... 40  
Frequency response ...................................... 20 20000 Hz  
Signal-to-noise ratio ............................................. 76 dBA  
Channel separation .................................... 79 dB (1 kHz)  
Total harmonic distortion ........................... < 0.02% (1 kHz)  
GENERAL INFORMATION  
Material/finish ...................................... Polystyrene/Metal  
AC Power  
For Version /21-21M ................ 110 127 / 220 240 V;  
.................................................... 50/60 Hz Switchable  
For Version /30................................. 230 240 V; 50 Hz  
Power Consumption  
TUNER  
FM wave range ........................................... 87.5 108 MHz  
MW wave range (9 kHz) .............................. 531 1602 kHz  
MW wave range (10 kHz) ............................ 530 1700 kHz  
Tuning grid ............................................................. 9/10 kHz  
Number of presets ............................................................ 40  
Antenna  
AUX In / CDR In ............................................ 500 mV / 1V  
Output  
Speakers ................................................................. 6 Ω  
Centre Speaker (for FW-D5 only) ........................... 6 Ω  
Surround Speakers (for FW-D5 only) ...................... 6 Ω  
Headphones............................................. 32 1000 Ω  
Subwoofer Out ............................ 1.5 V 2dB, > 22000 Ω  
Line Out .......................................... 1 V 2dB, > 22000 Ω  
Digital Out ......................................................... 1 coaxial  
................................................ IEC 958 for CDDA / LPCM  
............................ IEC1937 for MPEG1, MPEG2 and AC-3  
Surround Out wireless (for FW-D5 only) ............. 750 mV,  
2dB, > 22000 Ω  
Active  
FW-D5 .............................................................. 230 W  
FW-D1 .............................................................. 130 W  
Standby  
FW-D5 ............................................................. < 24 W  
FW-D1 .............................................................. < 24 W  
Dimensions (w x h x d) ...................... 265 x 310 x 390 (mm)  
Weight (without speakers) ...................................... 10.8 kg  
FM................................................................. 75 wire  
AM ........................................................... Loop antenna  
SPEAKERS  
System ............... Shielded 2-way; double port bass reflex  
Impedance .................................................................... 6 Ω  
Woofer ..................................................................... 1 x 6.5"  
Tweeter .................................................................... 1 x 2.5"  
Dimensions (w x h x d) ..................... 240 x 310 x 315 (mm)  
Weight ............................................................ 3.85 kg each  
Subject to modification  
(1) (6 , 1 kHz, 10% THD)  
DVD-VIDEO PLAYER  
Playback System ............................... DVD-Video/ Video CD  
CD (CD-R & CD-RW)  
Video  
DA converter ......................................................... 10 bits  
Digital compression ............................. MPEG 2 for DVD,  
............................................................... MPEG 1 for VCD  
Video output ................................................ 1 Vpp (75 Ω)  
CENTRE SPEAKER (FW-D5)  
System ................................................ shielded bass reflex  
Impedance .................................................................... 6 Ω  
Speaker Driver ........................................... 1 x 3full range  
Dimensions (w x h x d) ..................... 230 x 130 x 155 (mm)  
Weight ....................................................................... 1.3 kg  
39  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
39  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
TROUBLESHOOTING  
Warning! Under no circumstances  
should you try to repair the set  
yourself as this will invalidate the  
guarantee. Do not open the set as  
there is a risk of electric shock.  
No return to start-up screen when disc  
is removed.  
Maintenance  
Cleaning the Cabinet  
Check to see if the programme requires  
another disc to be loaded.  
Use a soft cloth slightly moistened with  
a mild detergent solution. Do not use a  
solution containing alcohol, spirits,  
ammonia or abrasives.  
Reload a disc.  
Reset by switching the player off, then  
on again.  
If a fault occurs, check the points listed  
below before taking the system for  
repair.  
Should any problems persist after you  
have made these checks, consult your  
nearest dealer or service centre.  
Player does not respond to all  
operating commands during playback.  
Cleaning Discs  
When a disc becomes  
dirty, clean it with a  
cleaning cloth. Wipe  
the disc from the  
Operations are not permitted by the  
disc.  
Refer to the instruction of the disc.  
centre out.  
Do not use solvents  
such as benzine,  
thinner, commercially available cleaners,  
or antistatic spray intended for analogue  
records.  
DVD-Video Player Operation  
Distorted picture or no colour with  
player menu.  
The disc format does not match your  
TV's video signal (PAL/NTSC).  
Replace a recommended disc (refer to  
the instruction of this manual).  
The system setting is not correct.  
Cleaning the disc lens  
After prolonged use, dirt or dust may  
accumulate at the disc lens. To ensure  
good playback quality, clean the disc  
lens with Philips CD Lens Cleaner or any  
commercially available cleaner. Follow  
the instructions supplied with cleaner.  
Make sure the NTSC/PAL setting at the  
player matches the video signal of your  
television (see NTSC/PAL setting).  
Check the disc for fingerprints.  
Clean with a soft cloth, wiping from  
centre to edge.  
Sometimes a small amount of picture  
distortion may appear, this is not  
malfunction.  
40  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
40  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Speakers are not connected or are  
connected wrongly.  
Timer is not working.  
Clock is not set.  
Set the clock.  
Timer is not switched on.  
CD Player Operation  
"NO DISC" is displayed.  
Radio Reception  
Poor radio reception.  
Check that the speakers are connected  
correctly.  
Make sure the stripped speaker wire is  
clamped.  
The disc is inserted upside down.  
Place disc with printed side up.  
Moisture condensation at the lens.  
The signal is too weak.  
Adjust the antenna.  
Connect an external antenna for better  
reception.  
Press TIMER to switch on the timer.  
Clock setting is erased.  
Wait until lens has adjusted to normal  
Reversed left and right sound.  
There was a power failure.  
room temperature.  
There is no disc in the CD tray.  
The TV or VCR is too closed to the  
stereo system.  
Speakers are connected wrongly.  
Reset the clock.  
Check the speaker connections and  
Insert a disc.  
Separate the stereo system from the TV  
or VCR.  
System displays features  
automatically; buttons flash  
continuously.  
location.  
The disc is dirty, badly scratched or  
warped.  
Lack of bass sound or apparently  
imprecise physical location of musical  
instruments.  
Cannot tune to radio station.  
Clean or replace the disc.  
The disc lens is dirty or dusty.  
Demonstration mode is switched on.  
Wrong tuning grid.  
Press and hold Ç (on the system) for  
five seconds to switch off the  
demonstration.  
Switch to the correct tuning grid.  
See section under Maintenance (page  
Speakers are connected wrongly.  
40).  
Check the speaker connection for  
proper phasing, coloured/black wires to  
coloured/black terminals.  
General  
System does not react when any  
button is pressed.  
"DISC NOT FINALIZED" is  
displayed.  
There is a howling sound at the  
external source.  
The CD-RW or CD-R disc is not properly  
recorded for use with a standard CD  
player.  
Remote control has no effect on the  
system.  
You hear feedback when you are  
listening in AUX mode  
Electrostatic discharge.  
Press STANDBY ON to switch the  
system off. Remove the AC power plug  
from the wall outlet, then reconnect the  
power plug and switch on the system  
again.  
Wrong source is selected.  
Press AUX to select CDR mode.  
Read the instruction booklet of your CD-  
Rewritable or CD-Recorder on how to  
finalise a recording.  
Select the source (CD, TUNER, etc.)  
before pressing the function button  
(É, í, ë, etc.).  
All lighted buttons are not lit.  
Display is switched on in DIM 3 mode.  
Press DIM until DIM OFF display mode  
The CD is badly scratched or dirty.  
The distance to the system is too large.  
Reduce the distance.  
Batteries are inserted incorrectly.  
is shown.  
Replace or clean CD.  
No or poor sound.  
Volume is not turned up.  
Adjust VOLUME.  
The headphones are connected.  
Disconnect the headphones.  
Insert the batteries with their polarities  
(+/signs) as indicated.  
Batteries are exhausted.  
Replace the batteries.  
41  
3139 115 20054  
pg 001-41/D5-D1/21-Eng new  
41  
6/8/01, 11:33 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PC Concepts Printer 500PS User Manual
Pentax Digital Camera ZF ZK ZS User Manual
Philips TV VCR Combo 21PV 288 User Manual
Philips Work Light 278168 User Manual
Philips Work Light T17 E14 User Manual
Planet Technology Network Card WNL U550 User Manual
Polk Audio Speaker MM840DVC User Manual
Promise Technology Network Card C6101SSWP000000 2 User Manual
PVI Industries Water Heater PV 500 6 User Manual
PYLE Audio Flat Panel Television PLVSMN5 User Manual