Always there to help you
Register your product and get support at
HTL2160
Question?
Contact
Philips
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
1 Important
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
•
•
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
Help and support
Philips provides extensive online support.Visit
Risk of short circuit or fire!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
•
•
•
download the user manual and the quick
start guide
watch video tutorials (available only for
selected models)
find answers to frequently answered
questions (FAQs)
Risk of injury or damage to the SoundBar!
•
•
•
email us a question
chat with our support representative.
Never place the product or any objects
on power cords or on other electrical
equipment.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact
Philips, note down the model number and
serial number of your product.You can find this
information on the back or bottom of your
product.
•
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
•
Risk of overheating!
•
Never install this product in a confined
space.Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Safety
Risk of electric shock or fire!
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaine, etc.).
Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
•
•
3
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Batteries contain chemical substances, they
should be disposed of properly.
serial number of your product.You can find this
information on the back or bottom of your
product.
Risk of swallowing batteries!
•
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
Care for your product
Use only microfiber cloth to clean the product.
•
•
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
•
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Help and support
Philips provides extensive online support.Visit
•
•
•
download the user manual and the quick
start guide
watch video tutorials (available only for
selected models)
find answers to frequently answered
questions (FAQs)
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
•
•
email us a question
chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact
Philips, note down the model number and
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
AUDIO-IN: Lights up when you switch
to the audio input source.
2 Your SoundBar
f SURR
Lights up when you selectVirtual Surround
Congratulations on your purchase, and
welcome to Philips!To fully benefit from
the support that Philips offers, register your
sound.
g Bluetooth
Lights up when you switch to the
Bluetooth mode.
Assemble your Soundbar
Remote control
Assemble your SoundBar as described in the
quick start guide (Step 1).
This section includes an overview of the
remote control.
Main unit
This section includes an overview of the main
unit.
a
a
b
c
b
c
l
k
j
d
e
d
e
f
g
i
h
f
g
a
Switch the SoundBar on or to standby.
b VOLUME +-
Increase or decrease volume.
c SOURCE
Select an audio source for the SoundBar.
d Power
Lights up when you switch on the
SoundBar.
e Source indicators
•
COAX/OPT/AUX: Lights up when
you switch to coaxial, optical or analog
audio input source.
•
USB: Lights up when you switch to the
USB source.
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
a
(Standby-On)
Switch the SoundBar on or to standby.
Top connectors
b COAX
Switch your audio source to the coaxial
connection.
c USB
a
b
Switch your audio source to the USB
connection.
a
(USB)
Audio input from a USB storage device.
d OPTICAL
Switch your audio source to the optical
connection.
b AUDIO-IN
Audio input from an MP3 player (3.5mm
e Bluetooth
Switch to Bluetooth mode.
jack).
f TREBLE +/-
Increase or decrease treble.
Rear connectors
g SURR
Toggle between stereo and virtual
surround sound.
h
Mute or restore volume.
i BASS +/-
Increase or decrease bass.
j VOLUME +/-
Increase or decrease volume.
d
e
a b
c
k AUDIO-IN
Switch your audio source to audio in
connection.
a AUDIO IN
Connect to an analog audio output on the
TV or an analog device.
l AUX
Switch your audio source to the AUX
connection.
b DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
c DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
Connectors
This section includes an overview of the
connectors available on your SoundBar.
d SUBWOOFER
Connect to the supplied subwoofer.
e AC MAINS~
Connect to the power supply.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect
Connect audio fromTV and
other devices
This section helps you connect your SoundBar
to aTV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Play audio fromTV or other devices through
your Soundbar speakers.
Use the best quality connection available on
yourTV, Soundbar, and other devices.
Option 1: Connect audio through a
digital optical cable
Note
• For identification and supply ratings, refer to the type
plate at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Best quality audio
TV
Placement
Place the subwoofer at least 1 meter (3 feet)
away from your SoundBar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
1 Using an optical cable, connect the
OPTICAL connector on your SoundBar to
the OPTICAL OUT connector on theTV
or other device.
•
The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1 Using a coaxial cable, connect the
COAXIAL connector on your SoundBar
to the COAXIAL/DIGITAL OUT
connector on theTV or other device.
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1 Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on theTV or
other device.
DVD
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer
4 Use your
SoundBar
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1 Press TREBLE +/- or BASS +/- to change
the frequency.
This section helps you use the SoundBar to play
audio from connected devices.
» All Source indicators on the main unit
blink twice when treble or bass is set
to the maximum or minimum value.
Before you start
•
Make the necessary connections described
in the quick start guide or download
support.
MP3 player
•
Switch the SoundBar to the correct source
for other devices.
Connect your MP3 player to play your audio
files or music.
What you need
•
•
An MP3 player.
A 3.5mm stereo audio cable.
Adjust the volume
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
1 Press VOLUME +/- to increase or
decrease a volume level.
•
•
To mute sound, press (MUTE).
To restore the sound, press (MUTE)
again or press VOLUME +/-.
2 Press AUDIO-IN.
3 Press the buttons on the MP3 player to
» All Source indicators on the main unit
blink twice when a volume is set to the
maximum or minimum value.
select and play audio files or music.
USB storage devices
Choose your sound
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
This section helps you choose the ideal sound
for your video or music.
What you need
•
A USB storage device that is formatted
for FAT file systems, and complies with the
Mass Storage Class.
Surround sound mode
•
An MP3 or WMA file on a USB storage
device
Experience an immersive audio experience with
surround sound modes.
1 Connect a USB storage device to the
1 Press SURR to select a surround mode.
SoundBar.
•
[Virtual Surround]: Creates a highly
surround listening experience.The
SURR indicator on the main unit lights
up.
2 Press USB on the remote control.
» The play starts after a few seconds.
•
[Stereo]:Two-channel stereo sound.
Ideal for listening to music.
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
user manual of the Bluetooth device on
how to enable Bluetooth).
Note
•
When prompted for a password, enter
"0000".
• This product may not be compatible with certain types
of USB storage device.
• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
» During connection, the indicator blinks
at a lower rate.
• Digital camera PTP protocols are not supported.
• Do not remove the USB storage device while it is
being read.
• DRM-protected music files (MP3,WMA) are not
supported.
3 Wait unitl the Bluetooth connection is
completed.
» When the Bluetooth connection
succeeds, and the Bluetooth indicator
lights up.
• Support a USB port: 5V , 500mA.
» If the connection fails, the Bluetooth
indicator blinks continually at a lower
rate.
Auto standby
4
Select and play audio files or music on
your Bluetooth device.
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
•
During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
•
•
no button is pressed for 30 minutes, and
no audio play from a connected device.
5 To exit Bluetooth, select other source.
•
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch,Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your SoundBar speakers.
What you need
Note
• The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
• If you want to connect your SoundBar with another
Bluetooth device, disable the currently connected
Bluetooth device.
•
A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 2.1 + EDR.
• Philips does not guarantee 100% compatibility with all
Bluetooth devices.
•
The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1 Press Bluetooth on the remote control to
switch the SoundBar to Bluetooth mode.
» The Bluetooth indicator blinks at a fast
rate.
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
2 On the Bluetooth device, switch on
Bluetooth, search for and select Philips
HTL2160 to start connection (see the
1 In mute mode, quickly press AUX twice.
» The factory settings is restored.
EN 10
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wall mount
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
• Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
3 - 3.5mm
> 25mm
For information about how to wall mount your
SoundBar, see the quick start guide.
11 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth
6 Product
specifications
•
•
Bluetooth profiles:A2DP
Bluetooth version: 2.1 + EDR
Main unit
•
•
•
•
Power supply: 220-240V~, 50 Hz - 60 Hz
Note
Power consumption: 30 W
Standby power consumption: ≤ 0.5 W
Speaker impedance: 8 ohm (Tweeter),
4 ohm (Woofer)
• Specifications and design are subject to change without
notice.
•
•
•
•
•
Frequency response: 160 Hz-20 kHz
Dimensions (WxHxD):
800 x 75.6 x 52.4 mm
Amplifier
•
•
•
•
Total output power: 60W RMS (+/- 0.5 dB,
10%THD)
Frequency response: 20 Hz-20 kHz /
±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
Weight: 1.2 kg
Operating temperature and humidity:
0°C to 40°C, 5% to 90% Humidity for all
climates
Storage temperature and humidity: -40 °C
to 70 °C, 5% to 95%
•
•
•
AUX: 2V
AUDIO-IN: 1V
Subwoofer
•
•
•
•
Impedance: 8 ohm
Speaker drivers: 130 mm (5.25") woofer
Frequency response: 45 Hz-200 Hz
Dimensions (WxHxD):
165 x 240 x 295 mm
Weight: 2.6 kg
Cable length: 3 m
Audio
•
S/PDIF Digital audio input:
•
•
Coaxial: IEC 60958-3
Optical:TOSLINK
•
•
USB
Remote control batteries
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
•
1 x CR2025
•
•
•
File system: FAT16 and FAT32
Supports MP3 and WMA file formats
Sampling frequency:
•
MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
•
•
•
Constant bit rate:
•
•
MP3: 8 kbps-320 kbps
WMA: 32 kbps-192 kbps
Version:
WMA:V7,V8,V9
•
EN 12
Download from Www.Somanuals.com. All Manuals Search And Download.
of the device on how to enable the
function.
7 Troubleshooting
•
•
The device is not correctly connected.
Connect the device correctly. (see 'Play
The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Warning
• Risk of electric shock. Never remove the casing of the
product.
Quality of audio play from a connected
Bluetooth device is poor.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
•
The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Bluetooth device connects and
disconnects constantly.
•
The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
Main unit
The buttons on the SoundBar do not work.
•
Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
•
•
For some Bluetooth, the Bluetooth
connection can be deactivated
Sound
automatically to save power.This does not
indicate any malfunction of the SoundBar.
No sound from SoundBar speakers.
•
Connect the audio cable from your
SoundBar to yourTV or other devices.
Reset your SoundBar to its factory settings.
On the remote control, select the correct
audio input.
•
•
•
Make sure that the SoundBar is not muted.
Distorted sound or echo.
•
If you play audio from theTV through the
SoundBar, make sure that theTV is muted.
Bluetooth
A device cannot connect with the SoundBar.
•
The device does not support the
compatible profiles required for the
SoundBar.
•
You have not enabled the Bluetooth
function of the device. See the user manual
13 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Notice
This section contains the legal and trademark
notices.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, Philips Consumer Lifestyle, declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity
is available in the Portable Document Format
(PDF) version of the user manual at www.
philips.com/support.
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
EN 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Consumer Lifestyle B.V.
2012/10
15
(Document No.)
(Year, Month (yyyy/mm) in which the CE mark is affixed )
EUROPEAN DECLARATION OF CONFORMITY
We, PHILIPS CONSUMER LIFESTYLE B.V.
(Company name)
TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS
(address)
HTL2160/12, HTL2160C/12
HTL2160W/12, HTL2160T/12
HTL2160G/12,HTL2160M/12
declare under our responsibility that the product(s):
Philips
HTL2160S/12
(Type version or model)
(brand name)
SOUNDBAR SPEAKER
(product description)
to which this declaration relates is in conformity with the following harmonized standards:
EN60065:2002+A1:2006+A11:2008+A2:2010+A12:2011
EN 55013:2001+A1: 2003+A2:2006, EN 55020:2007+A11:2011
EN61000-3-2:2006+A1:2009+A2:2009,EN61000-3-3:2008
EN62301:2005, EN62311:2008
EN 300328 V1.7.1:2006
EN 301489-1 V1.9.2: 2011, EN 301489-17 V2.1.1: 2009
EN50581:2012
following the provisions of :
1999/5/EC
2006/95/EC
2004/108/EC
2011/65/EU
2009/125/EC - EC/1275/2008
And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents
Only for Medical Devices and R&TTE products:
The Notified Body:
Telefication/CE0560
(Name and number)
performed:
and issued the certificate:
Remarks:
12214160/AA/00
(certificate number)
Drachten, 20-jun-13
(place,date)
A.Speelman, CL Compliance Manager
(signature, name and function)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
HTL2160_12_UM_V3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|