For product information and support, visit
SPEECHMIKE
LFH3200
without SpeechExec
dictation software
LFH3205
with SpeechExec
dictation software
LFH3300
with integrated
bar-code scanner
EN User manual
3
17
31
45
59
73
87
DE Benutzerhandbuch
FR Manuel de l‘utilisateur
ES Manual del usuario
IT Manuale di istruzioni
NL Gebruikershandleiding
SV Användarhandbok
Download from Www.Somanuals.com. All Manuals Search And Download.
User manual
1
Important
4
2
2.1
2.2
Your SpeechMike
What’s in the box
Overview
6
6
7
3
Get started
8
3.1
Installation
8
4
4.1
Use your SpeechMike
Create a recording
9
9
4.2
Use the bar-code scanner (LFH3300
only)
9
5
Use more of your SpeechMike 10
5.1
5.1.1
Customize the SpeechMike
Customize SpeechMike keys and
settings
Use application shortcuts
Update the firmware
Configure the bar-code scanner
(LFH3300 only)
10
10
11
12
5.1.2
5.2
5.3
13
14
15
6
7
Technical data
Frequently asked questions
User manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Important
Philips reserves the right to change products at
any time without being obliged to adjust earlier
supplies accordingly.
ACaution
Do not try to open the unit. Allow only
authorized service technicians to repair the unit.
Use of controls, adjustments or performance
of procedures other than those specified herein
may result in hazardous laser light exposure.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained.
Small children
Your device and its enhancements may contain
small parts. Keep them out of the reach of small
children.
Safety
• To avoid a short circuit, do not expose the
Compliance with EMF
product to rain or water.
Koninklijke Philips Electronics N.V. manufactures
• Do not expose the device to excessive heat
and sells many products targeted at consumers,
caused by heating equipment or direct sunlight. which, like any electronic apparatus, in
• Protect the cables from being pinched,
particularly at plugs and the point where they
exit from the unit.
• Back up your files. Philips is not responsible
for any loss of data.
general have the ability to emit and receive
electromagnetic signals. One of Philips’ leading
Business Principles is to take all necessary
health and safety measures for our products,
to comply with all applicable legal requirements
and to stay well within the EMF standards
applicable at the time of producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today. Philips plays an active role in the
development of international EMF and safety
standards, enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
SpeechMike Barcode
BClass 1 laser product
This product complies with:
• 21CFR1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50,
dated July 26, 2001.
• EN60825-1:1994 + A1:2002 + A2:2001
• IEC60825-1:1993 + A1:1997 + A2:2001
The laser classification is marked near the
scanner window on the product.
Cleaning and disinfection
Class 1 Laser devices are not considered to
be hazardous when used for their intended
purpose. The following statement is required to
comply with US and international regulations:
• Unplug the device before cleaning.
• Use a soft cloth, if necessary dampened with
a minimum amount of water or diluted mild
soap, to clean the product.
• Products for disinfection of surfaces in clinical
areas and patient care equipment, such as
4
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
surface disinfectant wipes, can be used to
clean the device.
• Do not use harsh chemicals or strong
detergents.
• Do not rub or strike the surface with
anything hard as this may scratch or damage
the surface permanently.
Disposal of your old product
• Your product is designed and manufactured
with high quality materials and components
that can be recycled and re-used.
• When this crossed-out wheeled bin
symbol is attached to a product, it
indicates that the product is covered
by the European Directive 2002/96/EC.
• Become informed about your local separate
collection system for electrical and electronic
products.
• Act according to your local rules and do
not dispose of old products with normal
household waste. The correct disposal of old
products will help prevent potential negative
consequences for the environment and human
health.
User manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Your SpeechMike
Congratulations on your purchase and welcome
to Philips!
To fully benefit from the service that Philips
offers, visit our Website for support information
such as user manuals, software downloads,
warranty information and more:
2.1 What’s in the box
Dictation microphone
CD-ROM containing software
and user manual
For product information and support, visit
SPEECHMIKE
LFH3200
without SpeechExec
dictation software
LFH3205
with SpeechExec
dictation software
EN Quick start guide
DE Kurzanleitung
FR Guide de démarrage rapide
ES Guía de inicio rápido
IT Guida rapida di introduzione
NL Snelle startgids
SV Snabbstartsguide
USB cable
Quick start guide
6
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Overview
1
2
3
Microphone
1
2
Record indicator light
• EOL end-of-letter key,
•• PRIO priority key
INS/OVR Insert/overwrite key
d Record key
3
4
4
5
6
7
8
9
5
c Rewind key
6
b Fast forward key
e Play/pause key
Left mouse button
7
8
9
10 Right mouse button
10
11
11 Trackball, left mouse button
12 F1, F2, F3 Programmable function keys
13 Speaker
12
13
14 USB cable
15 Bar-code scanner (LFH3300 only)
16 Left mouse button (LFH3200)
Scan button (LFH3300)
14
15
16
User manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Get started
3.1 Installation
Recording and playback of dictations with the
SpeechMike requires dictation software such
as Philips SpeechExec to be installed on the
computer. When third-party dictation software
other than Philips SpeechExec is used, driver
software must be installed before connecting
the SpeechMike.
CImportant
Administrator rights are required to install
the software. For more help, contact your
administrator.
1 Turn on the computer.
2 Connect the USB plug of the SpeechMike to
a free USB port.
3 The New Hardware Found message is
displayed and installation will proceed
automatically.
D Note
If the message does not appear, verify if
the USB port is enabled in the BIOS of the
system. See the hardware documentation
for details, or contact your hardware
vendor.
4 Restart the PC when prompted by Windows.
5 Insert the installation CD in the CD-ROM
drive. The set-up program should start
automatically. If it does not, open the CD
contents in Windows Explorer and double-
click the autorun.exe file.
6 Click the Install button.
7 Follow the on-screen instructions of the
set-up program.
8
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Use your SpeechMike
This chapter describes how to use the
4.2 Use the bar-code scanner (LFH3300
only)
SpeechMike with Philips SpeechExec dictation
software. If the SpeechMike is used with third-
party software other than Philips SpeechExec,
some features may not be present or function
differently. For detailed information, refer to the
documentation delivered with the software.
1 Press the scan button and scan the
barcode. When a barcode is recognized,
the SpeechMike will beep and the barcode
information is inserted into the currently
active application as if the barcode number
is typed in digit by digit.
4.1 Create a recording
DNote
1 The SpeechMike must be connected to the
computer with the USB cable.
The barcode scanner allows barcode scanning
from a distance of up to 30 cm / 12 inches.
2 Press the d RECORD key to create a new
recording and enter Record standby mode.
• The recorder window is displayed.
• The record indicator light flashes red (in
overwrite mode) or green (in insert mode).
3 Press the e key and start speaking.
The record indicator light glows in red (in
overwrite mode) or green (in insert mode) while
recording.
4 For short pauses, press the e key. To
continue recording, press the e key again.
5 To stop recording, press the d RECORD key.
6 Press the •EOL/••PRIO key to mark the
recording as finished.
• The dictation file is moved to the Finished
dictations folder.
• The recorder window closes and the work list
window is displayed.
7 To assign priority status to the recording,
press the •EOL/••PRIO key again within half
a second.
DNote
For best results, speak clearly and keep the
microphone about 10 to 15 centimeters (4 to 6
inches) away from your mouth.
User manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Use more of your
SpeechMike
5.1 Customize the SpeechMike
Use the Device Control Center software to
customize the SpeechMike to suit individual user
needs.
The software allows to assign different functions
to each key, enable or disable certain features
and also to start and control applications with
the SpeechMike.
5.1.1 Customize SpeechMike keys and
settings
4 Click the Upload button to save the new
1 Ensure that the docking station is connected
to the computer with the USB cable and
that the wireless connection to the dictation
microphone is established.
settings.
2 If the option to start the Device Control
Center automatically was selected during
installation, open the program by clicking
the
icon in the notification area of the
Windows task bar. To manually start the
program, open the Windows start menu in
Windows and select All Programs > Philips
Speech Control > Philips Device Control
Center.
DNote
• Settings cannot be changed when the battery
charge level of the SpeechMike is below 10
% (when the battery charge level indicator is
red). Charge the dictation microphone before
changing the settings.
The current settings are automatically
downloaded from the connected SpeechMike.
• The SpeechMike can be reset to its factory
default configuration by clicking the Defaults
button. Click the Upload button to save the
default settings.
3 On the Device tab, configure device settings
and select the function to be assigned to
each key.
ETip
To test settings and key functions, use the Device
test section on the Device tab.
10
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
SpeechMike key Assigned shortcut
5.1.2 Use application shortcuts
The Device Control Center software allows to
start and control other applications with the
keys on the SpeechMike.
Record (push to dictate)
Play from cursor position
Move cursor backwards
Move cursor forwards
Mark backwards
d Record
e Play/Stop
c Rewind
b Fast forward
•EOL/••PRIO
INS/OVR
The Device Control Center software includes
pre-installed profiles that make the SpeechMike
ready for immediate operation with Dragon
NaturallySpeaking speech recognition software
and Microsoft Powerpoint. Additional profiles
for other applications can be programmed.
Open correction window
Powerpoint profile
Use this profile to control Powerpoint
presentations with the SpeechMike. The
following settings are defined:
1 If the option to start the Device Control
Center automatically was selected during
SpeechMike key Assigned shortcut
installation, the application icon
appears
Black screen
White Screen
Go to previous slide
Go to next slide
End slide show
Show/hide cursor
in the notification area of the Windows task
bar. To manually start the program, open the
Windows start menu in Windows and select
All Programs > Philips Speech Control >
Philips Device Control Center.
d Record
e Play/Stop
c Rewind
b Fast forward
•EOL/••PRIO
INS/OVR
2 Right-click on the application icon
in
the notification area of the Windows task
bar and verify that ‘Acitvate application
control’ is enabled. If the option is disabled,
the configured settings and buttons will not
function for any of the target applications.
DNote
Philips cannot guarantee the proper function of
all assigned shortcuts, since shortcuts can differ
among versions and languages.
Program a custom profile
It is possible to program shortcuts for other
applications to control application functions
with the keys of the SpeechMike.
DNote
1 Ensure that the docking station is connected
to the computer with the USB cable and
that the wireless connection to the dictation
microphone is established.
Exit Philips SpeechExec software when using
application shortcuts to prevent unintentional
recording when controlling other applications.
2 If the option to start the Device Control
Center automatically was selected during
installation, open the program by clicking
Default profile
The default profile is applied automatically when
there is no profile assigned to an application in
focus. This profile is set up to control Dragon
NaturallySpeaking with your SpeechMike. The
following settings are defined:
the
icon in the notification area of the
Windows task bar. To manually start the
program, open the Windows start menu in
Windows and select All Programs > Philips
Speech Control > Philips Device Control
Center.
User manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Dragon NaturallySpeaking command
• Delay
7 You can add one operation or a sequence of
operations for every shortcut.
8 Click the Apply button to save the new
settings.
3 On the tab Application control, click the
button to create a new profile.
4 Browse and select the application
executable and click on OPEN.
A profile for the selected application will be
added to the list of profiles.
DNote
DNote
The Device Control Center cannot be used
to program application shortcuts for Philips
SpeechExec software. Shortcuts for Philips
SpeechExec can be configured in the General
settings menu of SpeechExec. See the SpeechExec
application help for more information.
Exit the target application during
configuration. Open the application when
the device configuration settings are saved.
5 Select a button from the button colum and
click the
icon to assign a shortcut. You
can assign different shortcuts for pressing
and releasing a key.
The shortcut editor window is displayed.
ETip
Application control configuration settings can be
saved into files and imported later to apply the
same configuration settings to several devices.
5.2 Update the firmware
Your SpeechMike is controlled by an internal
program called firmware. Newer versions of the
firmware may have been released after you have
purchased the SpeechMike.
1 Download the firmware update for your
dictation.
6 Enter name for the shortcut and click
the Add button add an opertion for the
shortcut. The following options are available: 2 Ensure that the docking station is connected
• Hotkey: Assign a keyboard shortcut
• Text: Enter the text to be inserted when
a key on the SpeechMike is pressed
• Start an application by pressing a key on
the SpeechMike
to a wall outlet with the AC charger and
to the computer with the USB cable.
The dictation microphone must be in the
docking slot of the docking station.
3 If the option to start the Device Control
Center automatically was selected during
• Mouse button
12
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
installation, open the program by clicking
the icon in the notification area of the
Windows task bar. To manually start the
program, open the Windows start menu in
Windows and select All Programs > Philips
Speech Control > Philips Device Control
Center.
4 On the Device tab, click on Firmware
update.
5 Click the Import button and select the
folder with the firmware files to be
imported.
6 Click the Upgrade button to install the new
firmware.
• The firmware upgrade takes about 30
seconds.
• During firmware upgrade the indicator lights
of the SpeechMike will be flashing.
BWarning
Do not disconnect the dictation microphone
from the computer during firmware upgrade.
This might damage your product.
5.3 Configure the bar-code scanner
(LFH3300 only)
The SpeechMike barcode scanner is pre-
configured with the keyboard language US
English and the suffix “carriage return” (CR).
Before using the barcode scanner for the first
time, it is necessary to adapt it to your local
keyboard language. To change the scanner
configuration, start the application Barcodeconfig.
exe on the installation CD.
For information about customizing the barcode
module, refer to the Advanced Barcode Scanner
Configuration manual on the installation CD
provided with your SpeechMike.
User manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Technical data
Connectivity
Green specifications
• USB: Mini-USB 2.0
• Compliant to 2002/95/EC (RoHS)
• Lead-free soldered product
Audio recording
• Microphone type: electret condenser
Operation conditions
microphone
• Temperature: 5°–45° C / 41°–113° F
• Microphone cartridge: 10 mm
• Characteristic: uni-directional
• Frequency response: 100–7500 Hz
• Impedance: xxx
• Sensitivity: -37 dBV
• Bit rate: xx kbps
• Humidity: 10 %–90 %
Specifications
• Product dimensions (W × D × H):
45 × 165 × 30 mm / 1.8 × 6.5 × 1.2 inch
• Weight: 0.112 kg / 0.247 lb
• Cable length: 3 m / 9.8 ft
• Sample rate: xx kHz
Sound
Design and finishing
• Speaker type: built-in round, dynamic speaker
• Color(s):
• Speaker diameter: 30 mm
• Acoustic frequency response: 300–7500 Hz
• Speaker output power: > 200 mW
• Signal-to-noise ratio: > 70 dBA
Accessories
• USB cable
• CD-ROM containing software and user
manual
System requirements
• Quick start guide
• Processor: Pentium III, 500 MHz (Pentium IV
or similar, 1 GHz recommended)
• RAM memory: 512 MB (1 GB recommended)
• Hard disk space: 10 MB for Speech Control,
100 MB for SpeechExec (optional), 250 MB
for Microsoft .NET Framework
• Operating system: Windows 7/Vista/XP
• Free USB port
• DVD-ROM drive
14
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Frequently asked questions
The operating system stops responding
after restart
• Set via Start > Control Panel > Sound >
Playback (tab)
Using the Philips SpeechMike together
with certain USB hubs may cause the
operating system to stop responding
when the computer is started.
Unplug the SpeechMike before starting the PC
and reconnect it afterwards. We recommend
replacing the USB hub or connecting your
SpeechMike directly to the USB port of the
computer.
• Or, right-click the speaker icon if it’s in your
toolbar and select playback devices
The SpeechMike is completely without
function
Some computer providers limit the
output power of USB ports to 100mA.
These ports may not provide enough
power for the SpeechMike to function
properly.
Use the AC charger.
Connect the SpeechMike via the self-powered
hub.
The SpeechMike is connected to the
computer but sound will play on the
computer’s speaker only
Windows XP can support only one
playback device at a time and may
require setting the playback device back
to “SpeechMike Air” if another playback
device was enabled after the SpeechMike
was installed.
• Set via Start > Control Panel > Sound and
Audio Devices > Audio (tab)
• Or, right-click the speaker icon if it’s in the
toolbar and select Adjust Audio Properties
Windows Vista can support more than
one playback device at a time, but if you
disable the device for playback it is also
disabled for recording. You may need
to right-click and select “Show disabled
devices” to change the setting.
User manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Federal Communications Commission
Notice
Declaration of Conformity
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
Model Number:
LFH3200, LFH3205,
LFH3210, LFH3215,
LFH3220, LFH3225,
LFH3300, LFH3310,
LFH3320
Trade Name:
Philips SpeechMike
Responsible Party: Philips Speech Processing
Modifications
The FCC requires the user to be notified that
Address:
64 Perimeter Center East,
Atlanta, GA 30346, USA
any changes or modifications made to this
Telephone number: 888-260-6261
device that are not expressly approved by Philips Website:
may void the user’s authority to operate the
equipment.
LFH3200, LFH3205, LFH3210, LFH3215,
LFH3220, LFH3225, LFH3300, LFH3310,
LFH3320
Cables
Connections to this device must be made with
shielded cables with metallic RFI/EMI connector
hoods to maintain compliance with FCC Rules
and Regulations.
Tested to comply with
FCC standards
f
FOR HOME OR OFFICE USE
Canadian notice
This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: 1) This device may not cause harmful
interference. 2)This device must accept any
interference received, including interference that
may cause undesired operation.
Avis Canadien
Cet appareil numérique de la classe B respecte
toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
CE Declaration of Conformity
Philips confirms that the product corresponds
to the relevant guidelines of the European
Union.
Download from Www.Somanuals.com. All Manuals Search And Download.
Discover the comprehensive range of professional dictation products from Philips
Specifications are subject to change without notice.
Trademarks are the property of Royal Philips Electronics or their respective owners.
© 2010 Royal Philips Electronics. All rights reserved.
Document Version 1.0, 06/05/2010.
Download from Www.Somanuals.com. All Manuals Search And Download.
|