Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
DVD Video Recorder________________________________________6
Box contents_______________________________________________7
Placement _________________________________________________7
Cleaning discs ______________________________________________7
Remote control ____________________________________________7
Loading the batteries_______________________________________7
Installation
Connections - back side of your DVD recorder __________________8
Connecting to the antenna____________________________________8
Connecting to a TV set ______________________________________8
S-video (Y/C) connection ___________________________________8
Video (CVBS) connection ___________________________________8
Connecting to audio equipment________________________________9
Connecting to A/V receiver or A/V amplifier with digital
Multi-channel decoder______________________________________9
Connecting to a receiver equipped with two channel digital
stereo (PCM)_____________________________________________9
Connecting to a receiver equipped with Dolby Pro Logic _________9
Connecting to a TV set equipped with a Dolby Pro Logic decoder__9
Connecting to a receiver with two channel analogue stereo _______9
Connecting to other equipment ______________________________10
Connections - frontside of your DVD recorder__________________10
Camcorder connection____________________________________10
Power supply _____________________________________________11
Switching on ______________________________________________11
First time set-up: virgin mode ________________________________11
Automatic setting ________________________________________11
Manual setting ___________________________________________12
Functional overview
Front of recorder __________________________________________14
Rear of recorder___________________________________________15
Display___________________________________________________16
Remote control ___________________________________________17
Operation
Important notes for operation________________________________18
Loading discs______________________________________________18
Disc types _______________________________________________18
The following disc types can be used for recording and playback __18
The following disc types can be used for playback only __________18
The following disc types cannot be used at all, neither for
recording nor for playback _________________________________19
On-screen display information________________________________19
System menu bar_________________________________________19
User preference menu operation____________________________20
Status box ______________________________________________20
Tuner info box __________________________________________21
Timer info box __________________________________________21
Warning box ____________________________________________21
Index Picture Screen________________________________________22
User preferences __________________________________________23
Setting user preferences __________________________________23
Picture settings __________________________________________23
Sound settings ___________________________________________23
CONTENTS 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Language settings_________________________________________24
Feature settings __________________________________________24
Remote control settings ___________________________________25
Record settings __________________________________________25
Installation ______________________________________________26
Recording
Before you start recording___________________________________28
Manual recording __________________________________________28
Checking input___________________________________________28
Recording_______________________________________________28
Manual audio control _____________________________________29
Recording with automatic switch-off (OTR One-Touch Recording)_30
Timer programming ________________________________________30
Timer programming with the VIDEO Plus+® system_____________30
Timer programming without the VIDEO Plus+ system __________31
Programming with ‘NEXTVIEW Link’ __________________________32
If a timer setting is incorrect _________________________________32
How to check or alter a timer block_________________________33
How to clear a timer block ________________________________33
Playback
Playing a DVD+RW or DVD+R disc___________________________34
Playing a pre-recorded DVD-Video disc ________________________34
Playing a (Super) Video CD disc ______________________________34
General features ___________________________________________35
Moving to another title/track _______________________________35
Moving to another chapter/index____________________________35
Slow Motion ____________________________________________35
Still Picture and Step Frame ________________________________36
Search _________________________________________________36
Repeat _________________________________________________36
Repeat A-B _____________________________________________36
Scan ___________________________________________________37
Time search_____________________________________________37
Zoom__________________________________________________37
Special DVD+R(W) features _________________________________38
Recording date and time___________________________________38
Special DVD-Video features__________________________________38
Menus on the disc________________________________________38
Camera Angle ___________________________________________38
Changing the audio language________________________________38
Subtitles ________________________________________________39
Special VCD-Features_______________________________________39
Playback Control (PBC) ___________________________________39
Playing an audio CD ________________________________________39
Pause __________________________________________________40
Search _________________________________________________40
Moving to another track___________________________________40
Repeat track/disc_________________________________________40
Repeat A-B _____________________________________________40
Scan ___________________________________________________40
4 CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Access control
Child Lock (DVD and VCD) _________________________________41
Activating/deactivating the child lock _________________________41
Authorizing discs when Child Lock is activated_________________41
Securing discs ___________________________________________41
Parental Level (DVD-Video only)______________________________42
Activating/Deactivating Parental Control ______________________42
Country__________________________________________________42
Changing the 4-digit code____________________________________43
Managing disc content
Title settings ______________________________________________44
Changing the title name ___________________________________44
Play full title_____________________________________________44
Erasing a title____________________________________________44
Disc Info Screen ___________________________________________44
Disc Settings ______________________________________________45
Changing the Disc Name __________________________________45
Protection of recordings___________________________________45
Erasing a disc ____________________________________________45
Finalising a DVD+R disc ___________________________________45
Making your edits DVD compatible __________________________46
Favourite Scene Selection____________________________________46
Calling up the FSS menu ___________________________________46
Inserting chapter markers__________________________________47
Hiding chapters __________________________________________47
Deleting chapter markers __________________________________47
Changing the index picture_________________________________47
Dividing a title ___________________________________________48
Append recording ________________________________________48
Troubleshooting
Troubleshooting checklist ___________________________________49
Diagnosis programme_______________________________________51
Instructions _____________________________________________51
System limitations__________________________________________51
Glossary
Appendix
Using your DVD recorder remote control with your TV set _______54
CONTENTS 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
With it, you will be able to record TV programmes or
to edit and archive your own camcorder recordings.
Superb digital picture and sound quality, quick access to
the tracks you have recorded and extensive playback
features contribute to a completely new video
experience.
DVD Video Recorder
DVD (Digital Versatile Disc) is the new storage medium
that combines the convenience of the Compact Disc
with the latest advanced digital video technology.
DVD-Video uses state-of-the-art MPEG2 data
compression technology to register an entire movie on a
single 5-inch disc. DVD’s variable bitrate compression,
running at up to 9.8 Mbits/second, captures even the
most complex pictures in their original quality.
The crystal-clear digital pictures have a horizontal
resolution of over 500 lines, with 720 pixels (picture
elements) to each line. This resolution is more than
double that of VHS, superior to Laser Disc, and entirely
comparable with digital masters made in recording
studios.
From now on you will enjoy full-length movies with true
cinema picture quality, and stereo or Multi-channel
sound (depending on the disc, and on your playback set-
up).You will find your recorder remarkably easy to use,
by way of the On-Screen Display on your TV and the
display on the DVD recorder, in combination with the
remote control.
DVD recording is the next step in video technology.
DVD+ReWritable (DVD+RW) uses phase-change media,
the same technology that formed the basis for CD-
ReWritable. A high-power laser is used to change the
reflectivity of the recording layer. This process can be
repeated more than a thousand times. DVD+Recordable
(DVD+R) uses discs based on an organic dye, a
technology pioneered with the successful CD-
Recordable format, to produce discs that keep your data
for a lifetime.
Your Philips DVD recorder is a recorder and player
for digital video discs, with a two-way compatibility
to the universal DVD-Video standard. This means that:
- existing pre-recorded DVD-Video discs can be
played on your Philips DVD recorder and
- recordings, made on your Philips DVD recorder, can
be played on most DVD-Video players and
DVD-ROM drives.
6 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Box contents
Cleaning discs
First check and identify the contents of your DVD
recorder package, as listed below:
- DVD recorder
Some problems may occur because the disc inside the
recorder is dirty. To avoid these problems clean your
discs regularly, in the following way:
- Remote Control Handset with separately-packed
batteries
l When a disc becomes dirty, clean it with a cleaning
- 2-core power cord
- SCART cable
cloth. Wipe the disc from the centre out.
- S-video cable
Caution:
- Antenna (aerial) cable
- Audio cable
- Video cable
- DVD+RW disc
- User Manual
Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for analogue discs.
Do not use commercially available cleaning discs
to clean the lens, as these discs may damage the
optical unit.
- Warranty card
If any item should be damaged or missing, please inform
your supplier without delay.
Remote control
Keep the packaging materials; you may need them to
transport your recorder in the future.
Loading the batteries
Placement
l Open the battery compartment cover.
l Insert two 'AA' (LR-6) batteries as indicated inside
the battery compartment.
l Close the cover.
l Place the recorder on a firm, flat surface.
l Keep away from domestic heating equipment and
direct sunlight.
Caution:
Do not mix old and new batteries. Never mix
different types of batteries (standard, alkaline,
etc.). This may reduce the lifetime of the
batteries.
l In a cabinet, allow about 2.5 cm (1 inch) of free
space all around the recorder for adequate
ventilation.
l The lense may cloud over when the DVD recorder
is suddenly moved from cold to warm surroundings.
Playing a CD/DVD is not possible then. Leave the
DVD recorder in a warm environment for two
hours before use, so the moisture can evaporate.
l The recorder should not be exposed to dripping or
splashing, no objects filled with liquids, such as vases,
should be placed on the recorder.
INTRODUCTION 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
S-video (Y/C) connection
Connections - back side of your
DVD recorder
l Connect the S-video output socket to the
corresponding input socket on the TV set, using the
supplied S-video cable (3).
l Connect the audio Left (white) and Right (red)
output sockets to the corresponding sockets on the
TV set using the audio cable supplied (5).
- Please refer to your TV set, VCR, Stereo System and
any other User Manual(s) as necessary to make the
optimal connections.
- Do not connect the power until all other connections
are made.
- Do not connect your DVD recorder to your TV set
via your VCR, because the video quality could be
distorted by the copy protection system.
- For better sound reproduction you can connect the
recorder audio outputs to your amplifier, receiver,
stereo system or A/V equipment. For this see
‘Connecting to A/V receiver or A/V amplifier’.
Caution:
Do not connect the recorder’s audio output to
the phono input of your audio system in order to
avoid damage to your equipment.
Connecting to the antenna
l Remove the antenna (aerial) cable plug from your
TV set and insert it into the antenna socket at the
back of the DVD recorder.
l Plug one end of the antenna (aerial) cable supplied (1)
into the TV socket on the DVD recorder and the other
end into the antenna input socket on your TV set.
If your TV set is not equipped with S-video sockets, then
connect the DVD recorder with the CVBS sockets to
your TV set.
Connecting to a TV set
To obtain the highest possible picture and sound quality
from your TV set it is recommended to use the SCART
connector on both DVD recorder and TV set.
Video (CVBS) connection
l Connect the Video (CVBS) output socket (yellow)
to the corresponding input socket on the TV set
using the video cable supplied (4).
l Connect the audio Left (white) and Right (red)
output sockets to the corresponding sockets on the
TV set using the audio cable supplied (5).
l Connect the bottom SCART connector (EXT 1) to
the TV set, using the SCART cable supplied (2) as
shown in the drawing. If your TV set is equipped
with EasyLink or Cinema Link, make sure you use
the correct scart connector. For this refer to the
user manual of your TV set.
If your TV set is not equipped with a SCART connector,
you can connect the DVD recorder with the S-video
(Y/C) sockets.
8 INSTALLATION
Download from Www.Somanuals.com. All Manuals Search And Download.
If you cannot connect your DVD recorder to an A/V
receiver with Multi-channel decoder, choose one of the
following alternatives.
Connecting to audio equipment
Connecting to A/V receiver or A/V
amplifier with digital Multi-channel
decoder
Connecting to a receiver equipped with
two channel digital stereo (PCM)
The best possible sound quality is obtained by
l Connect the recorder’s digital audio output to the
corresponding input on your receiver. Use the
supplied video (CVBS) cable (7) or an optional
digital optical audio cable (8).
connecting your DVD recorder to an A/V receiver with
Multi-channel decoder (Dolby Digital, MPEG 2 and DTS).
Digital Multi-channel sound
l After installation you will need to activate PCM on
the DVD recorder’s digital output (see ‘User
Preferences’).
Digital Multi-channel connection provides the optimum
sound quality. For this you need a Multi-channel A/V
receiver that supports one or more of the audio types
supported by your DVD recorder (MPEG 2, Dolby
Digital and DTS). For this you can check the receiver
manual and the logos on the front of the receiver.
Connecting to a receiver equipped with
Dolby Pro Logic
l Connect the recorder’s digital audio output to the
corresponding input on the receiver. Use a digital
coaxial cable (7) or a digital optical audio cable (8).
l Connect the recorder to the TV set and connect the
recorder’s audio Left and Right output sockets to the
corresponding inputs on the Dolby Pro Logic
Audio/Video receiver, using the audio cable supplied (6).
If you do not own a digital coaxial audio cable (not
supplied), you may use the supplied video cable (4).
Note:
If the audio type of the digital output does not match the
capabilities of your receiver, the receiver will produce a
strong, distorted sound. The audio type of the DVD disc in
play is displayed in the Status Window, when changing the
language. 6 Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is equipped
with a Digital Multi-channel decoder.
l Make the appropriate Sound settings for Analogue
Output in the user preferences menu.
Connecting to a TV set equipped with a
Dolby Pro Logic decoder
l Connect the recorder to the TV set as described in
chapter ‘Connecting to a TV set’.
Connecting to a receiver with two channel
analogue stereo
l If you have a receiver with two-channel analogue
stereo without any of the above mentioned sound
systems, connect the audio Left and Right output
sockets to the corresponding sockets on your
receiver, amplifier or stereo system. Use the audio
cable supplied (6).
INSTALLATION 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to other equipment
Connections - frontside of your
DVD recorder
Use the top SCART connector (EXT 2) on your DVD
recorder to make connections to a:
Camcorder connection
- Satellite receiver or Set top box,
- VCR,
l If you have a DV or Digital 8 camcorder, connect
the i-link DV input socket (1) to the corresponding
output socket on the camcorder using the i-link
cable of your camcorder.
l If you have a Hi-8 or S-VHS(C) camcorder, connect
the S-video input socket to the corresponding
output socket on the camcorder, using the S-video
cable supplied (2) and connect the audio cable (4)
supplied.
- DVD-Video player
Most pre-recorded video cassettes and DVD discs are
copy protected. If you try to copy them the display
shows ‘COPY PROTECT’.
For installation of a decoder, see ‘User Preferences’ -
‘Installation’.
l Otherwise connect the Video input socket (yellow)
to the corresponding output socket on the
camcorder using the video cable supplied (3) and
connect the audio Left (white) and Right (red) input
sockets to the corresponding sockets on the
camcorder using the audio cable supplied (4).
l If your camcorder has mono sound, use only the left
audio connector. In this case the sound will be
recorded on both audio channels.
Notes:
- If the power is off or Low Power Standby is selected (see
User Preferences - features), the signal from EXT 2 will not
be passed on to the TV set on EXT 1.
- EasyLink functionality will not be available to devices
connected via the DVD recorder’s EXT 2 SCART connector.
10 INSTALLATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
First time set-up: virgin mode
After switching on the DVD recorder for the very first
time the ‘virgin mode screen’ will appear.
In ‘virgin mode’ you may have to set your preferences
for some of the recorder features.
If the ‘virgin mode screen’ does not appear, your DVD
recorder has been installed already. You may still change
the settings via the ‘installation menu’.
Depending on the kind of TV set, preferences will have
to be set manually or they will be taken over
automatically from the TV set.
l Make sure that all necessary connections are made
before connecting the DVD recorder to the power
supply.
l Plug the power cable supplied into the Power
connector on the rear of the recorder.
l Plug the mains plug into an AC outlet.
Automatic setting
TM
When your TV set is equipped with EasyLink , Cinema
Note:
TM
TM
TM
TM
Link , NEXTVIEW Link , SmartLink , Q-Link or
Always check if the local mains voltage matches the required
220V - 240V.
When the recorder is in the Standby position, it is still
consuming some power.
If you wish to disconnect your DVD recorder completely from
the mains, withdraw the plug from the AC Outlet.
When the DVD recorder is disconnected from the mains, TV
channels and timer data will be stored typically 1 year.
TM
MegaLogic , the TV settings will be taken over from the
TV set but they cannot be changed manually afterwards.
When preferences are taken over from your TV set, the
message ‘Easy Link loading data from TV
-
please
wait’ will appear.
Menus for which no preferences are available will be
displayed. They have to be set manually.
Note:
Switching on
Preferences have to be set in the order in which the item
menus will appear on the screen.
If the recorder is switched off while setting user preferences,
all preferences have to be set again after switching the
recorder on again.
l Switch on the TV set and select the programme
number that you have chosen for video playback
(see operating manual for your TV set).
l Press B STANDBY/ON.
The ‘virgin mode’ will only be concluded after the
preferences for the last item have been confirmed.
‰ The recorder display lights up. If you have not yet
installed your DVD recorder, it will enter ‘virgin
mode’. In this mode you will have to set your
personal preferences.
Follow TV
Easy Link
loading data from TV
please wait
-
INSTALLATION 11
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Shape
Manual setting
Virgin mode
When a menu is displayed:
TV Shape
4:3 letterbox
4:3 panscan
16:9
l Use the wv (down up cursor) keys to go through
the options in the menu. The icon of the selected
option will be highlighted.
l Use OK to confirm your selection and to select the
next menu.
The following items may have to be set in virgin mode:
Menu language
The on-screen menus of DVD-Video discs will be
displayed in the language you choose.
Press OK to continue
You can choose:
Virgin mode
-
-
16:9 if you have a wide screen (16:9) TV set.
4:3 if you have a regular (4:3) TV set. In this case you
Menu language
English
can also choose between:
-
Letterbox for a ‘wide-screen’ picture with black
bars at the top and bottom,
-
trimmed. If a disc has Pan Scan, the picture then
moves (pans) horizontally to keep the main action
on the screen.
Español
Pan Scan, for a full-height picture with the sides
Français
Italiano
Deutsch
Press OK to continue
Audio language
The sound of DVD-Video discs will be in the language
you choose, provided this is available on the disc in play.
If not, speech will revert to the first spoken language on
the disc. Also the DVD-Video disc menu will be in the
language you choose, provided this is available on the disc.
Virgin mode
Audio language
English
Español
Français
Português
Italiano
Press OK to continue
Subtitle language
The subtitles of DVD-Video discs will be in the language
you choose provided this is available on the disc in play. If
not, subtitles will revert to the first subtitle language on
the disc.
Subtitle language
English
Español
Français
Português
Italiano
Press OK to continue
12 INSTALLATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Country
Time/Date
Select your country. This is used as input for the
‘Parental Control’ feature (see ‘Access Control’) as well
as the searching of TV channels.
When Channel auto search is completed the actual Time
and Date are also set automatically.
If the time in the DVD recorder display is not correct,
the clock must be set manually.
Virgin mode
Country
Austria
Belgium
Denmark
Finland
France
Press OK to continue
Auto TV Channel Search
Make sure the antenna is connected. See ‘Connecting to
the antenna’. Your DVD recorder will search for all TV
channels.
It stores channels in the sequence they are found.
l Confirm with OK.
‰ Auto search starts. This can take several minutes.
l Adjust ’Time’, ’Year’, ’Month’, ’Date’ if required,
with the w (down cursor) or v (up cursor) key.
l Change values with the the t (left cursor) or u
(right cursor) key or the digit keys 0-9.
l To end, press OK.
Autom.search
Note:
Searching for TV channels
XX channels found
All these items may have to be set after first start up (‘virgin
mode’). After that they can always be adapted in the user
preferences menu. When your TV set is equipped with
EasyLink the TV set presets will be taken over from the TV
set but they cannot be changed manually afterwards.
Virgin mode settings are now completed.
All settings can still be changed. See ‘User preferences’.
Please wait
‰ When Auto search is completed ‘Autom.
search complete
-
XX channels found’ appears
on the TV screen.
After Auto channel search you can have TV channels
stored automatically in the same order as your TV set.
See ‘User preferences installation’ - ‘Follow TV’.
INSTALLATION 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional overview
Front of recorder
14 FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear of recorder
MAINS
- connection to the mains
TV
- RF connection to TV set
ANTENNA
- RF connection to antenna/cable TV signal
Video (CVBS)
- OUT: for connection to a TV, receiver or amplifier with CVBS video inputs
- IN: for connecting a video source with CVBS outputs
S-video (Y/C)
- OUT: for connection to a TV, receiver or amplifier with S-video (Y/C) inputs
- IN: for connecting a video source with S-video (Y/C) outputs
AUX I/O (EXT II)
- for connection to a satellite receiver, decoder, video recorder, set top box
etc. via SCART
TO TV I/O (EXT I)
- for connection to a TV with SCART
AUDIO OUT L/R
- connection to an amplifier, receiver, stereo system or
to a TV that is not equipped with a SCART connector
AUDIO IN L/R
- connection to the audio output of a video source that
is not equipped with a SCART connector
OUT OPTICAL
- connection to an amplifier, receiver or stereo system
with a digital (optical) audio input
OUT COAX
- connection to an amplifier, receiver or stereo system
with a digital (coaxial) audio input
FUNCTIONAL OVERVIEW 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
+
16 FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
FUNCTIONAL OVERVIEW 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Important notes for operation
Disc types
You can switch on the DVD recorder with the
B STANDBY/ON key. Keep your DVD recorder
connected to the mains at all times to ensure that
programmed recordings can be made and that the
television functions normally.
You will recognize the different types of discs, that can
be used in your DVD recorder by the logo. Depending
on the disc type you can either use it for recording and
playback or playback only. Some discs are not suitable at
all to be used in the DVD recorder.
In the next table a summary is given of all excisting disc
types and their DVD recorder compatibility.
The following disc types can be used for
recording and playback:
DVD+RW
Records and plays; In case of a new blank disc, after the
first recording, some more time (up to two minutes) is
needed to make the disc compatible with DVD-Video
players.
Both the DVD recorder and the remote control have an
’Emergency interrupt’ button. You can use the
B STANDBY/ON button to interrupt a function.
When you have an operating problem, you can interrupt
the function and start again.
DVD+R
Records and plays.
When you switch off the DVD recorder, the display will
briefly show ‘WAIT’.
The following disc type can be used for
playback only:
Loading discs
DVD-Video
1
2
3
Press / OPEN/CLOSE on the front of the
recorder. The disc loading tray opens.
Lay your chosen disc in the tray, label side up.
Make sure it is sitting properly in the correct recess.
Press / OPEN/CLOSE, to close the tray.
‰ ‘READING’appears in the status box and on the
recorder display. If the inserted disc is pre-recorded
or write-protected, playback always starts
automatically.
DVD-R
Only plays if it contains DVD-Video.
You can always unload a disc by pressing
/ OPEN/CLOSE again or pressing 9 STOP on the
remote control for two seconds.
Note:
If ‘Child Lock’ is set to ON and the disc inserted is not in the
‘child safe’ list (not authorized), the PIN code must be entered
and/or the disc has to be authorized. (see ‘Access Control’)
18 OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-RW
On-screen display information
Only plays if it is recorded in Video mode and has been
finalized.
System menu bar
CD Digital Audio
You can play digital audio CDs in conventional style
through a stereo system, using the keys on the remote
control and/or front panel, or via the TV set using the
on-screen display (OSD).
The system menu bar can be called up by pressing any of
the following keys on the remote control: SYSTEM
MENU, T/C,
ANGLE, Z SUBTITLE, Y
AUDIO and a ZOOM.
Super Audio CD
Of hybrid SACD discs, the CD layer can be played.
(Super) Video CD
Depending on the material on the disc (a movie, video
clips, a drama series, etc.) these discs may have one or
more tracks, and tracks may have one or more indexes,
as indicated on the disc case. To make access easy and
convenient, your recorder lets you move between
tracks, and between indexes.
Widescreen (16:9) TV sets may show only part of the
system menu bar in certain screen modes. Select a
different screen mode on the TV to see the full menu.
A number of recorder functions can be controlled via
the system menu bar. You can navigate between the two
parts of the system menu bar with the t (left cursor)
and the u (right cursor) key.
System menu bar icons
PART 1
PART 2
CD-R/CD-RW
User preference
Title/Track
Chapter/Index
Audio language
Subtitle language
Angle
Sound
Plays if it contains Audio CD or MP3 material.
Step motion
Slow motion
Fast motion
Time search
The following disc types cannot be used at
all, neither for recording nor for playback:
Zoom
Temporary Feedback Field
DVD-RAM
The system menu bar contains a ‘Temporary Feedback
Field’ with information concerning prohibited actions,
playback modes, available angles, etc.
DVD-Audio
OPERATION 19
Download from Www.Somanuals.com. All Manuals Search And Download.
l You can navigate between the various items of the
user preferences menu with the v (up cursor) and
the w (down cursor) key. To select an item press u
(right cursor) key.
Scan
Repeat All
Repeat Title
Repeat Track
Repeat Chapter
Repeat A to end
Repeat A-B
Angle
off
on
off
Child Lock On
Child Safe
Resume
off
on
off
Action prohibited
User preference menu operation
l Press SYSTEM MENU on the remote control.
l Select
in the system menu bar and press w
(down cursor).
‰ The user preferences menu appears.
l Use the t u v w (left right up down cursor) keys
to toggle through the menus, sub menus and
submenu options.
‰ When a menu item is selected, the cursor keys
(on the remote control) to operate the item are
displayed next to the item.
l By pressing SYSTEM MENU the system menu bar
l Press OK to confirm and return to the main menu.
will disappear from the screen.
Status box
The status box on the left hand side of the screen
displays the current status of the recorder and the disc
type loaded for several seconds.
The following functions can be operated via the user
preference menu.
User preference menu icons
Picture settings
Sound settings
Language settings
Feature settings
Remote control settings
Record settings
Installation
20 OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc type icons
DVD+RW
Timer info box
The timer info box is located above the tuner info box
and is displayed in monitor mode. It displays the current
status of the timer.
DVD+R
DVD-Video
Super Video-CD
Video-CD
no disc
When a timer is programmed it shows a timer indication
and the start time or date of the first programmed
recording.
Timer event due today
disc error
Disc status icons
recording
stop
Timer event due on another day
playing
pause play
record pause
erasing
When an OTR recording is in progress it shows the end
time.
fast forward
fast reverse
slow motion
OTR recording in progress
/
When no timer is programmed it displays the current
time.
Tuner info box
The tuner info box is located at the bottom left of the
screen and is displayed in monitor mode (See: Recording
Checking input). It displays the currently selected input.
When the tuner is selected it shows programme number
and/or channel name.
Current time
Note:
Tuner info box and timer info box automatically disappear
after a few seconds.
Current channel
No signal
Warning box
The warning box will be displayed near the bottom of
the screen when appropriate. For instance: ‘Disc locked’.
’
Copy-protected signal
OPERATION 21
Download from Www.Somanuals.com. All Manuals Search And Download.
l On the right hand side of the Index Picture Screen,
you can see the disc bar. This gives an overview of
all titles on the disc, as well as any empty spaces.
On the disc bar, an arrow – the disc pointer –
indicates your current position on the disc. From
this point you may resume playback or recording.
l If you navigate trough the list of titles with w v
(down up cursor) or J PREVIOUS/ K NEXT, the
disc pointer will move along.
l Press 9 STOP to reset the disc pointer to the
beginning of the disc.
l To move the disc pointer to the end of the last title,
keep K NEXT pressed.
Index Picture Screen
The Index Picture Screen displays an overview of the
titles recorded on the disc. Each title is represented by
an index picture. Next to the index picture the
programme name, duration, recording mode and
recording date of the title are shown. If no name is
known, the DVD recorder will fill in the source and the
time of the recording instead.
Empty spaces (erased titles, or blank space at the end of
the disc) are also shown as such.
l At maximum three titles will be shown on the
screen at once. If more titles are present, you can
navigate to those with the w v (down up cursor)
keys.
l If you navigate from an Index Picture to the box
right next to it (containing name, rec mode, etc.),
you enter the title settings menu (see under
‘Managing disc content - Title settings’).
Empty title
Index Picture
- image that represents a recorded title
Current title
Title description
Indication what disc area
will be overwritten by
upcoming timer event
- programme name
- duration + recording mode
- recording date
Disc Pointer
- shows number and place
of current title on disc
Cue to go to Disc Info Screen
or to title on previous screen
Other title
ZDF 11:11
00:00: 55 -SP
Thu 08 02 2001
2
VRT 11: 13
00:00: 57 -SP
Thu 08 02 2001
1: 15 hr
01 Z D F
Empty title
00:00: 59-SP
4
Cue to go to title on next screen
Disc Bar
- shows an overview of
all titles on disc
Tuner Info Box
- displays the selected channel
Timer Info Box
- displays the current time or time/date
of the next timer programme
22 OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Video shift
User preferences
Factory setting is such that the video will be centered on
your screen. Use this setting to adjust the position of
the picture on your TV set by scrolling it to the left or
right.
Setting user preferences
You can set your user preferences for some of the
recorder features. (See ‘Operation’ - ‘User preferences
menu operation’)
off
on
off
The following items can be adapted:
Picture
TV shape
Picture settings
Black Level shift
Video shift
TV Shape
SCART video
With TV Shape you can adjust the output of your DVD
Recorder to optimally fit your TV screen. You can
choose:
OK to exit
-
-
16:9 if you have a wide screen (16:9) TV set.
4:3 if you have a regular (4:3) TV set. In this case you
can also choose between:
-
Letterbox: for a ‘wide-screen’ picture with black
bars at the top and bottom,
SCART Video
Factory setting is RGB. Select ‘S-video’(Y/C) via SCART
when connecting to an S-VHS recorder.
-
Pan Scan: for a full-height picture with the sides
trimmed. If a disc has Pan Scan, the picture then
moves (pans) horizontally to keep the main action
on the screen.
Sound settings
Digital output
Factory setting ‘All’ means that both coaxial and optical
outputs are switched on, and that Dolby Digital Multi-
channel is fed to the outputs as such MPEG audio is
converted to PCM. If your equipment doesn’t include a
digital Multi-channel decoder, set the digital output to
‘
PCM only’ (Pulse Code Modulation). Both coaxial and
optical outputs are then switched on, and Dolby Digital
and MPEG audio are converted to PCM. If you are not
connecting equipment with a digital input, change the
setting to ‘Off’.
Analogue output
off
on
off
Sound
Digital output
Analogue output
Night mode
Stereo
Surround
3D sound
Black level shift (NTSC only)
Adapts the colour dynamics to obtain richer contrasts.
Select ‘On’or ‘Off’.
Select ‘Stereo’, ‘Surround’ or ‘3D Sound’. Factory
setting is Stereo.
OPERATION 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround: Select this setting when using equipment
with a Dolby Surround Pro Logic decoder.
In this setting the 5.1 audio channels (Dolby
Digital, MPEG-2) are downmixed to a
Adapt disc format
This option is only available when a DVD+RW or
DVD+R disc recorded on a different brand of recorder
is loaded. You can adapt the menu to your own
recorder.
Surround-compatible 2-channel output.
3D Sound: In a set-up without rear speakers (analogue
stereo output), this option remixes the six
channels of digital surround (Dolby Digital,
MPEG-2) into a two speaker output, while
retaining all of the original audio information.
The result is the listening sensation of being
surrounded by multiple speakers.
A DVD+RW/+R video disc that has been recorded on a
different type or brand of recorder can be played, but
may not provide all features commonly available to
DVD+RW/+R discs, such as the on-screen disc bar, the
disc settings menu, the title settings menu, and editing. If
the disc is not write-protected, the disc format can be
adapted to the own recorder, after which these
functions are available.
Connected audio system
Digital out Analogue out
Status box
The status box displays the current status of the recorder
and the disc type loaded (See ‘Operation’ - ‘On-screen
display information’). You can switch it On or Off.
Off = always Off.
On = displayed together with the system menu bar or
displayed temporarily (disappears after time-out)
when changing the playback or record status.
Factory setting is ‘On’.
Amplifier or TV with two channel
analogue stereo
Off
Stereo
Amplifier or TV with Dolby Surround Off
or Dolby Pro Logic
Surround
Stereo
Amplifier with two channel digital
stereo
PCM only
Auto resume
A/V receiver with Multi-channel
decoder (Dolby Digital, MPEG, DTS)
All
Stereo or
Surround
The Auto resume setting only applies to pre-recorded
DVD-video and Video CD discs only - not only to the
disc in the recorder but also to the last twenty discs you
have played.
If ‘Auto resume’ is set to ‘On’, playback will start from
the point where it was stopped the last time the disc
was played.
When ‘Auto resume’ is set to ‘Off’, the recorder will
start playing from the beginning of a disc. In this case you
can still resume when
Multi-channel A/V receiver with
6-ch connectors
Off
Surround
Night Mode
Night mode optimizes the dynamics of the sound with
low volume playback for less disturbance in quiet
environments. This only works for Dolby Digital audio
on DVD-Video discs.
appears on screen by
pressing 2 PLAY. Factory setting is ‘On’.
Low power standby
r Language settings
If low power standby is ‘On’, the recorder will consume
minimum power in standby mode.
Factory setting is ‘Off’.
The preferred language can be adapted via the system
menu bar. Also see ‘virgin mode’. Settings can be
changed for:
- Playback audio language
- Subtitle language
Notes:
When the recorder is in low power standby mode:
- the output of the equipment connected to EXT 2 will not
be passed through to the TV set on EXT 1,
- the Display will be Off,
- Menu language
- Country setting.
- the Standby indicator on the recorder will still light up in
standby mode.
Feature settings
Access Control
Access Control contains the following features:
Child Lock - When Child Lock is set on, a 4-digit code
needs to be entered in order to play discs.
Parental Level - Allows the conditional presentation of
DVD discs containing Parental Level information.
Change country - Allows conditional presentation of
DVD-Video discs containing country information.
Change code - To change the pin code.
off
on
off
Features
Access control
Status box
Autoresume
Low power standby
PBC
See ‘Acces Control’.
24 OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
PBC
In practice, the DVD recorder may record a few
minutes more than indicated. For playback, the correct
recording mode will automatically be selected. The HQ
mode is optimised for recording via the i-link DV input.
This feature is only available when a (Super) Video CD is
loaded. It allows you to disable or enable the PBC
(Playback Control) menu of VCD discs. See under
‘Special VCD features’: Factory settings is ‘On’.
For all other sources use SP
,
SP+, LP EP or EP+.
,
l In the record settings menu, select ‘Record mode’.
Finalise disc
This option is only available on unfinalised DVD+R discs.
See ‘Managing disc content - Finalising a DVD+R disc’.
Record settings
Remote Control settings
Record mode
Direct record
Sat record
Auto chapters
LP/EP rec mode
EP+
Off
Off
On
Key sound
The recorder makes a ‘beep’ sound upon every key
command given via recorder or remote control keys.
Select ‘Off’ to disable this sound. Factory setting is ‘On’.
Stndrd
Remote control used
To exit press
SYSTEM MENU
If you want to use the remote control of a Philips DVD
player instead of the standard DVD recorder remote
control, select ‘DVD player’. Factory setting is ‘DVD
recorder’.
l Alter the recording mode with t or u (left right
cursor).
l Confirm with the OK key.
l To end, press SYSTEM MENU.
System information
When you move further down in the Remote Control
settings menu, the system status screen will appear.
Press v (cursor up) to go back.
An alternative way to select the record mode is available
in the Index Picture Screen and in monitor mode:
l Press SELECT.
Record Settings
‰ The new record mode appears on the screen and
the display.
Record mode
By selecting a recording mode you define picture quality
of recordings and maximum recording time for a disc.
EP
+
Mode
Picture quality
Total recording
time
It is not possible to switch record modes during
recording.
HQ
(High Quality)
best possible
picture quality
60 minutes
120 minutes
150 minutes
180 minutes
SP
pre-recorded
DVD quality
(Standard Play)
SP+
(Standard Play)
pre-recorded
DVD quality
LP
better than
(Long Play)
S-VHS picture quality
EP
better than
VHS picture quality
240 minutes
360 minutes
(Extended Play)
EP+
(Extended Play+) VHS picture quality
OPERATION 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct record
Installation
With the Direct Record function switched ‘On’ and the
DVD recorder switched to standby, the channel number
selected on your television will be automatically taken
over by the DVD recorder, at the moment it starts
recording. This only applies for televisions connected via
SCART, which have video output via SCART or which have
Auto TV Channel Search
Your DVD recorder will search for all TV channels.
It stores channels in the sequence they are found. (See
‘Installation - First time Set-up’)
EasyLink. Factory setting is ‘Off’
.
Note:
l In the record settings menu, select ‘Direct record’.
l Select ‘On’. If you select ‘Off’, the function will be
switched off.
All channels stored so far will be erased.
Follow TV
l Confirm with OK.
l To end, press SYSTEM MENU.
With Follow TV you can programme the same channel
sequence on the DVD recorder as on the TV set.
This only functions if the recorder socket (EXT1) and
the TV set are connected with a SCART cable. Additional
equipment connected to socket EXT2 must be switched
off.
Sat record
You can only use this function, when you have a satellite
receiver, which can control other equipment by a
’programming’ function. In this mode your DVD
recorder starts recording when the satellite receiver
releases a signal. The start and end of the recording is
controlled via one of the SCART sockets.
Installation
Autom.search
Follow TV
Manual search
Sort TV channels
Time Date
l In the record settings menu, select ‘Sat record’.
l Select the SCART socket (EXT1 EXT2) to which the
,
satellite receiver is connected with t or u (left right
cursor).
l Confirm with OK.
l Insert a recordable DVD+RW disc.
l Press B STANDBY/ON.
‰ When this function is switched on, SAT appears
on the display.
To exit press
SYSTEM MENU
‰ The DVD recorder is now prepared for
recording.
Factory setting is ‘Off’.
l Press OK.
Auto chapters
‰ If the DVD recorder recognizes that the TV set
has been connected with a SCART cable, ‘TV01’
appears on the display.
If autochapters is ‘On’every five to six minutes a
chapter marker (beginning of a new chapter) is inserted
during recording. This enables easy navigation through a
title during playback. In either case you can manually
insert chapter markers afterwards. (See ‘Managing disc
content’ - ‘Edit in playback mode’.)
Filter Mode
In long play or extended play recording mode you can
select the ‘Sport’setting to optimize the video
recording for images that contain fast movements, like
sports programmes. The setting does not influence high
quality or standard play recording mode.
Factory setting is ‘Stndrd’.
‰ When ‘NOTV’ (no signal from TV set) appears on
the display, the TV channels can not be allocated
automatically. In this case read ‘Manual TV channel
search’.
l Select programme number ‘1’ on the TV set.
l Confirm with OK on the remote control of the
DVD recorder.
‰ The DVD recorder compares the TV channels on
the TV set and the DVD recorder. If the channels
match, this channel is stored at ‘P01’.
l Wait until 'TV02’ appears and repeat the previous
two steps for programme number 2 and the rest of
the channels you want to store.
l To end, press SYSTEM MENU.
26 OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual TV channel search
Sort/Clear TV channels manually
l If the DVD recorder is connected to the TV set
with EasyLink or a similar system, manual sort
cannot be executed. In all other cases, you can
select.
You can perform a search to select and store TV
channels manually. If the DVD recorder is connected via
EasyLink, this function is not available.
l Press SYSTEM MENU.
l Select ‘Installation’.
l Press SYSTEM MENU.
l Select ‘Manual search’.
l Select the line ’Installation’.
l In the line ‘Channel
Freq. : frequency
CH : channel
/
freq.’select the display for:
l Select the line ’Sort TV channels’.
Installation
S-CH : special channel
Sort TV channels
l If you know the frequency or channel of the desired
TV channel, you can enter the data in line
...
‘Entry/search’with the digit keys0-9. If you don’t
PO1 NED
PO2 NED
PO3 NED
PO4 RTL
PO5 RTL
1
2
3
4
5
know the frequency or channel of the TV channel of
your choice, press u (right cursor) to start channel
search.
l In the line ‘Programme number’select the
programme number you want, using t or u (left
right cursor) or digit keys 0-9.
l If you want to change the TV channel name, press
the u(right cursor) key in line ‘TV channel name’.
l Select the character you want to change with the t
(left cursor) or u (right cursor) key.
VERON
PO6...
To sort
To exit press
SYSTEM MENU
Press
l Change the character with the w (down cursor) or
v (up cursor) key.
l Press OK to confirm.
l Select the TV channel to which you want to allocate
a programme number (starting with ‘P01’) with the
v (up cursor) or w (down cursor) key and press the
u (right cursor) key.
l Select the desired position with v or w (up down
cursor) key.
This DVD recorder can receive HiFi sound transmissions
in NICAM Stereo. However, if sound distorsion occurs,
due to poor reception, you can switch off NICAM:
l To store, press OK.
l In the line ‘NICAM’select ‘On’or ‘Off’with the t
(left cursor) or u (right cursor) key.
If you want to change the automatic TV channel setting,
select the line ‘Fine tuning’. With the t (left cursor) or
u (right cursor) key you can vary the automatic TV
channel setting.
l If you want to delete a channel from the programme
list, press CLEAR when you have selected the
channel.
l To end, press SYSTEM MENU.
Time/Date
To adjust ‘Time’, ‘Year’, ‘Month’ and ‘Date’ with the
digit keys 0-9. Switch between fields with the w v
(down up cursor) keys.
Important: This re-tuning is only necessary and useful
in special cases, e.g. when stripes appear on your TV
screen when using a cable-TV system.
l Press OK to store the TV channel.
l To end, press SYSTEM MENU.
Connecting a decoder:
l Switch on the TV set and select the programme
number for the DVD recorder.
l Select the TV programme you wish to link with the
decoder function with CH+ or CH-.
l Press SYSTEM MENU
Time
Year
Month
Date
09: 38
2001
02
09
l Select ‘Installation’.
l Select ‘Manual search’.
l Select ‘Decoder’.
l Select ‘On’with t (left cursor) or u (right cursor).
l Confirm with OK.
To exit press
SYSTEM MENU
‰ ‘DECODER’ apperars on the display.
l To end, press SYSTEM MENU.
OPERATION 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Before you start recording
Recordings on a DVD disc are called ‘titles’. Every title
consists of one or more chapters.
stop
Disc is not
a
DVD video disc
Press OK to open tray or
press REC to erase disc
11:15
For more information about how to go to other titles or
chapters see ‘Playback - general features’.
01 B B C 1
Important:
Recordings on a DVD+RW disc are normally
started from the position of the so-called disc
pointer, i.e. the point where the last recording
was stopped. From there on earlier recordings
may be overwritten without notice, unless the
disc is write protected. In this respect your DVD
recorder behaves just like a Video Cassette
Recorder.
‰ A disc can hold up to 48 titles (including empty
titles). When this maximum is reached the on-
screen message ‘Too many titles’ appears, if you
want to make a new recording. You have to erase a
title first next to an empty title. (See ‘Managing Disc
Content’.)
Manual recording
If you want to make a recording without the risk
of overwriting earlier recordings use the safe
Record Function (see Manual Recording - Safe
Record)
Checking input
Normally, the DVD recorder displays the contents of
the disc on screen.
In the Index Picture Screen you can select the point
where you want to start your recording. Use the w v
(down up cursor) and 5 REVERSE/ 6 FORWARD
keys. You can see the the current location on the disc
bar, indicated by the arrow.
l Press MONITOR in order to switch to the internal
tuner, or whichever other source is selected, if you
want to check the input before starting a recording.
‰ On the TV screen, you will see the actual picture
quality that you will get if you record: the video has
been encoded and decoded again. This is why you
will see a delay of about 1.5 seconds when using a
‘live’ source such as a camera.
l In monitor mode you can choose programme
numbers directly with the digit keys 0-9 on the
remote control.
l Press SELECT repeatedly to select the desired
record mode.
Your DVD recorder always checks the disc that you
have inserted:
‰ When a DVD+RW/+R disc is inserted on which
recordings have been made, the Index Picture
Screen is shown on your TV screen.
‰ If the inserted disc is a completely empty
recordable disc, the message ‘EMPTY DISC’ appears
on the display.
‰ If the inserted disc is a DVD+RW disc with a
content that is not DVD-Video compatible (e.g. a
data disc), a dialog box is shown with the option to
erase or eject the disc. You can only record on this
disc after erasing it with the RECORD key.
l Press MONITOR again to go back to disc mode.
Recording
l Insert a recordable DVD+RW or DVD+R disc.
l Normally, the DVD recorder displays the contents
of the disc on the screen.
l Use the MONITOR button to see the currently
selected TV channel.
l Use CHANNEL 3 or CHANNEL 4 (on the
recorder) or CH+, CH- (on the remote control) to
select the programme number (programme name)
from which you wish to record.
Note:
- On a disc containing PAL recordings, no NTSC recordings
can be made and vice versa. On an empty disc, either type of
recordings can be made.
- No recordings can be made from so-called ‘Pseudo-PAL’ or
PAL-60 sources.
‰ When a TV channel transmits a channel name,
it will be shown on the display.
28 RECORDING
Download from Www.Somanuals.com. All Manuals Search And Download.
l The Index Picture Screen is updated.
‰ ‘MENU UPDATE’ is shown on the display.
l After a short recording on a new DVD+RW disc, a
few minutes will be needed to complete the
formatting of the disc.
Safe Recording
When you start recording on a DVD+RW disc by briefly
pressing the RECORD or REC/OTR key, a recording
on DVD+RW will be made from the current position of
the disc pointer. To prevent this do the following:
l Hold the RECORD key (on the recorder) or
REC/OTR key (on the remote control) press for
about two seconds until ‘SAFE RECORD’ appears
on the display.
l The recorder automatically jumps to the end of the
last title on the disc and starts recording.
‰ If no free space is left. The display will show
‘DISC FULL’. Safe record is not possible then.
Recordings on DVD+R are always automatically made
after the last title on the disc.
The following programme numbers are provided for
recording from external sources:
Direct Record
‘EXT1’ : TV set via SCART 1 socket
‘EXT2’ : for recording from external sources via
SCART 2 socket
’EXT3’ : rear S-video
‘EXT4’ : rear CVBS
With Direct Record you can start recording immediately
from the programme selected on the TV set.
l Make sure ‘Direct record’ is switched ‘On’.
(See record settings).
l On the TV set, select the programme number you
want make the recording from.
l Make sure the DVD recorder is switched to
standby.
l Press RECORD (on the recorder) or REC/OTR
(on the remote control).
‘CAM1’ : front S-video (Y/C)
‘CAM2’ : front Video (CVBS)
‘CAM3’ : front DV.
l Press RECORD (on the recorder) or REC/OTR
(on the remote control).
‰ RECORD is shown on the display.
‰ The status box is shown on the screen for a few
seconds.
Notes :
- Don’t select another programme number on your TV set,
until the ‘WAIT’ on the display of your DVD recorder
disappears. This can take up to one minute.
- When ‘NOTV’ appears on the display, the programme
number could not be found. The DVD recorder switches off
automatically.
- If your loudspeakers are connected (via an amplifier /
receiver) to your DVD recorder, the sound will be delayed
relative to the TV picture when recording directly from the TV
set.
- You can use Direct Record in combination with Safe Record.
Manual audio control
You can control the audio recording level of your DVD
recorder manually.
l In monitor mode, press AUTO/MAN REC
VOLUME on the DVD recorder.
l To bring back the status box during recording press
SYSTEM MENU. Pressing SYSTEM MENU once
more will remove the status box again.
l Press
;
PAUSE to pause recording. You can
PAUSE once more.
‰ The display will show the current audio level and
MANUAL appears.
resume recording by pressing
;
The DVD recorder will make a seamless connection.
l Press 9STOP to stop recording. If you are recording
from a camcorder watch the video output of the
DVD recorder on the TV - instead of the camcorder
viewer - to determine the right moment to stop.
RECORDING 29
Download from Www.Somanuals.com. All Manuals Search And Download.
When you have programmed the timer, a red line on
the disc bar (both on the display and on the Index
Picture Screen) indicates what part of the disc will be
overwritten by the programmed recording from the
current disc position (on DVD+RW) or after the last
title (on DVD+R).
l Adjust the recording level with MANUAL 3 or 4
on the DVD recorder, so that the ‘0 dB’ mark lights
up during the loudest parts of the recording.
l You can switch back to automatic audio level control
by pressing AUTO/MAN REC VOLUME again.
‰ The display will show the current disc position
and MANUAL disappears.
When all timer blocks are full, the options timer
programming and VIDEO Plus+ system cannot be
accessed. For clearing a timer block, see ‘How to clear
a timer block’.
Note :
When DV input is selected, manual volume control is
disabled.
What is ’VPS’/‘PDC’?
Recording with automatic switch-off (OTR
One-Touch Recording)
With ’VPS/PDC’, the TV station controls the
beginning and the length of the programmed
recording. This means that the video recorder
switches itself on and off at the right time even if a
TV programme you have programmed begins earlier
or finishes later than expected.
Usually the start time is the same as the VPS/PDC
time. If, however, in the TV guide, in addition to a TV
programmes start time, a different VPS/PDC time is
given, e.g.: ’20.15 (VPS 20.14)’, you must enter ’20.14’
as the start time exactly to the minute. If you want
to enter a time that differs from the VPS/PDC time,
you must switch off ’VPS/PDC’.
Timer programming with the VIDEO
l Insert a recordable DVD+RW or DVD+R disc.
l Use CHANNEL 3 or CHANNEL 4 (on the
recorder) or CH+, CH- (on the remote control) to
select the programme number (programme name)
from which you wish to record.
®
PLUS+ system
l Press RECORD (on the recorder) or REC/OTR
(on the remote control) twice.
‰ A recording will be made of 30 minutes.
‰ The required end time of the recording is shown
in the timer box on screen. The remaining recording
time is shown on the display.
A PlusCode number is a number of up to nine digits,
printed in most TV guides next to the start time of a TV
programme.
All the information required for programming is encoded
in the PlusCode number.
l Select ‘VIDEO Plus
+
system’ with v (up cursor) or
w (down cursor).
l Press RECORD or REC/OTR again to obtain a
30 minute increment.
l Shortly after pressing REC/OTR, OTR can be
cancelled by pressing CLEAR.
Timer programming
VIDEO Plus+ system
The DVD recorder needs the following information for
every programmed recording:
- the date on which the recording is to be made;
- the channel;
- the start and stop time of the recording;
- VPS/PDC on or off;
- the recording mode.
The DVD recorder stores all the information mentioned
above in a timer block. You can programme up to six
timer blocks, one month in advance.
l Press u (right cursor).
30 RECORDING
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO Plus+ system
VIDEO Plus+ system
VPS
PDC
Rec
Date
09
Prog.
Start
09: 35
End
Mode
N E D
1
11: 35
S P
l Confirm with OK.
‰ The data has been stored in a timer block.
l To end, press TIMER.
l Make sure that you inserted a recordable disc.
If you inserted a write-protected disc recording
will be refused.
l Enter the entire PlusCode number (up to nine digits)
printed in your TV guide next to the start time of a
TV programme. If you made a mistake, you can
correct it with CLEAR.
l Confirm with OK.
l If the VIDEO Plus+ system does not recognize the
TV channel, the message ‘Please enter
programme number’ will appear on screen. Select
the required programme number (programme name)
with t u (left right cursor) or the digit keys 0-9 and
confirm with OK.
l Switch off with B STANDBY/ON.
Timer programming without the VIDEO
PLUS+ system
VIDEO Plus+ system
l Press TIMER on the remote control.
l Select ‘Timer programming’ with v (up cursor) or
w (down cursor).
‰ The data will appear on the TV screen.
l Press u (right cursor).
l Use SELECT to select the programming key at
VIDEO Plus+ system
daily or weekly intervals. Select ‘Mo Fr’ for recording
-
at daily intervals from Mondays to Fridays inclusive.
Select an individual day of the week for recording at
weekly intervals on the same day of the week.
l Press u (right cursor).
l Use SELECT to switch VPS/PDC on or off.
‰ When VPS/PDC is switched on, the start time is
marked with an asterisk.
l Press u (right cursor).
l Use SELECT to select the recording mode.
l Press u (right cursor).
l Enter the date with v (up cursor) or w (down
cursor), or with the digit keys 0-9.
RECORDING 31
Download from Www.Somanuals.com. All Manuals Search And Download.
l If desired, select recording at daily or weekly
Programming with ’NEXTVIEW Link’
intervals in the field ‘Date’ with SELECT. Select
‘
Mo
-
Fr’ for recording to be made from Mondays to
This DVD recorder is equipped with the function
’NEXTVIEW Link’. If your television is also equipped with
this function, you can mark TV programmes on the
television for programming. These TV programmes will
automatically be transmitted to a timer block on the
DVD recorder. If you clear the marking of the TV
programme on the television, the corresponding timer
block on the DVD recorder will also be cleared.
For more information, read the instruction manual of
your TV set.
Fridays inclusive. Select an individual day of the week
for recording at weekly intervals on the same day of
the week.
l Press u (right cursor).
l Enter the programme number from which you want
to record. If you want to record from an external
source, select ‘EXT1’, ‘EXT2’, ‘EXT3’, ‘EXT4’, ‘CAM1’,
‘
CAM2’ or ‘CAM3’ with vw (up down cursor).
l Press u (right cursor).
l Enter the Start time with vw (up down cursor) or
the digit keys 0-9.
l After entering the Start time, use SELECT to
switch VPS/PDC on or off. With most TV stations
the VPS/PDC time is always the same as the start
time.
‰ When VPS/PDC is switched on, the start time is
marked with an asterisk.
l Press u (right cursor).
l Enter the End time with vw (up down cursor) or
the digit keys 0-9.
l Use SELECT to choose the recording mode.
l If you made a mistake, you can go back with t (left
cursor).
If a timer setting is incorrect
The following warnings can be displayed in the timer
menu:
Collision
recording programme overlaps with another recording
programme.
Solution:
l Ignore by pressing TIMER. The programme with
the earlier start time will be recorded completely
before the later programme starts.
l Edit one or both timers.
l Delete one of the recording programmes.
Timer
Timer programming
Please enter programme number
The VIDEO Plus+ system does not recognize the TV
channel.
VPS
PDC
Rec
Date
09
Prog.
Start
09: 35
End
Mode
Solution:
N E D
1
11: 35
S P
l Select the required programme number (programme
name) with t or u (left right cursor).
l Confirm with OK.
PlusCode number wrong
You entered an incorrect PlusCode number or the
incorrect date.
Solution:
Mo Fr Weekly
Press SELECT
To store
Press OK
l Repeat the entry or end by pressing TIMER.
Weekend programming
-
not possible
Date was incorrectly entered. Daily programming can
only be used for recordings to be made from Mondays
to Fridays inclusive.
l Confirm with OK .
‰ The data has been stored in a timer block.
l To end, press TIMER .
‰ Make sure that you inserted a disc without write
protection. If you inserted a write-protected
(locked) disc, recording will be refused.
l Switch off with B STANDBY/ON.
Memory full
The maximum number of recording programmes is used.
Solution:
l Delete one of the recording programmes.
32 RECORDING
Download from Www.Somanuals.com. All Manuals Search And Download.
How to check or alter a timer block
How to clear a timer block
l Press TIMER on the remote control.
l Select ‘Timer list’ with w or v (down up cursor).
VIDEO Plus+ system
l Press TIMER on the remote control.
l Select ‘Timer list’ with w or v (down up cursor).
l Press u (right cursor).
l Select the timer block you want to clear with w or
v (down up cursor).
l Press CLEAR.
l Confirm with OK.
l Switch off by pressing TIMER.
l Press u (right cursor).
l Select the timer block you want to check or alter
with w or v (down up cursor).
l Press u (right cursor).
l Select what you want to check or alter with t or u
(left right cursor).
l Alter data with w or v (down up cursor) or with
the digit keys 0-9.
l Confirm with OK.
l To end, press TIMER.
l Switch off by pressing B STANDBY/ON.
RECORDING 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Notes:
Playing a DVD+RW or DVD+R
disc
- DVD movies to be released at different times in different
regions of the world, all players have region codes and discs
can have an optional region code. If you load a disc of a
different region code to your recorder, you will see the region
code notice on the screen. The disc will not play, and should
be unloaded.
- The region code is stated on a label on the
back side of your recorder.
- Regional coding is not applicable for
recordable DVD discs.
l Insert a DVD+RW or DVD+R disc.
‰ If the inserted disc is write-protected, playback
starts automatically otherwise the Index Picture
Screen appears.
l The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical key; if not, use the w v u t
(down up right left cursor) keys to highlight your
selection, and press OK.
l To stop play at any time, press 9 STOP.
‰ The default screen will appear, giving information
about the current status of the recorder.
l Press 2 PLAY.
‰ Playback starts automatically from the point
where it was stopped the last time the disc was
played or recorded. If you want to start playback
from the beginning of the disc, you can do so via the
Index Picture Screen (see ‘Index Picture Screen’).
‰ If the disc is a new blank disc, the display will
show ‘EMPTY DISC’.
l To stop playback at any time, press 9 STOP.
‰ You return to the Index Picture Screen.
Playing a pre-recorded DVD-
Video disc
Note:
Some DVD discs are produced in a way that requires
specific operation or allows only limited operation
during playback. In these cases the recorder may not
respond to all operating commands. When this occurs,
please refer to the instructions in the disc inlay. When a
appears on the TV screen, the operation is not
permitted by the recorder or the disc.
During playback you can display and enter the menu by
pressing DISC MENU.
Playing a (Super) Video CD disc
l Insert a pre-recorded DVD-Video disc. Make sure
the label is facing up. If the disc is two-sided, make
sure the label of the side you want to play is facing
up.
‰ When ‘autoresume’ is set to ‘On’ (see ‘User
Preferences’) playback starts automatically from the
point where it was stopped, the last time the disc
was played.
‰ When ‘autoresume’ is set to ‘Off’, the disc will
play from the start of the disc. You can however
resume play from the point at which you stopped,
the last time the disc was played, by pressing
l Insert a (Super) Video CD.
‰ When ‘autoresume’ is set to ‘On’ (see ‘User
Preferences’) playback starts automatically from the
point where it was stopped, the last time the disc
was played.
‰ The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical key 0-9.
2 PLAY when
appears on screen.
l To stop play at any time, press 9 STOP.
‰ The default screen will appear.
‰ The currently playing title and chapter number
are displayed on the recorder display. The elapsed
time is shown also.
34 PLAYBACK
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving to another chapter/index
General features
When a title on a disc has more than one chapter or a
track has more than one index, you can move to
another chapter/index as follows:
l Press K NEXT during play to select the next
chapter/index.
l Press J PREVIOUS during play to return to the
beginning of the current chapter/index. Rapidly press
J PREVIOUS twice to step back to the previous
chapter/index.
l To go directly to any chapter or index, enter the
chapter or index number using the numerical keys
0-9.
Note:
Unless stated otherwise, all operations described are based
on remote control operation. A number of operations can also
be carried out via the system menu bar on the screen. (see
‘System menu bar operation’)
Moving to another title/track
Notes:
- If the number has more than one digit, press the keys in
rapid succession.
When a disc has more than one title or track, you can
move to another title as follows:
- If the system menu bar is on screen, make sure the
is selected.
icon
Slow Motion
l Select
(Slow motion) in the system menu bar.
l Press T/C.
l Use the w (down cursor) key to enter the slow
motion menu.
l Press K NEXT during play to step forward to the
next title.
l Press J PREVIOUS during play to return to the
beginning of the current title. Rapidly press
J PREVIOUS twice to step back to the previous
title.
‰ The recorder will now go into pause mode.
l To go directly to any title or track, enter the title
number using the numerical keys 0-9.
Notes:
- If the number has more than one digit, press the keys in
rapid succession.
l Use the t u (left right cursor) keys to select the
required speed: ‘- ’, ‘- ’, ‘- ’ or ‘-
(backward); ‘ ’, ‘ ’ or ‘ ’ (forward).
l Select ‘ ’ to play at normal speed again.
1
1
/
2
1
1
2
/4
1/8’
- If the system menu bar is on screen, make sure the
is selected.
icon
1/8
1/
4’, ‘
/
1
1
l If ; PAUSE is pressed, the speed will be set to ‘0’.
l Press 2 PLAY to exit slow motion mode.
l Press v(up cursor) to delete the slow motion menu.
You can also select Slow Motion speeds by using the
SLOW key on the remote control.
PLAYBACK 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Picture and Step Frame
Repeat
DVD Discs - Repeat chapter/title/disc
l To repeat the currently playing chapter, press
REPEAT.
l Select
(picture by picture) in the system menu
bar.
l Use the w (down cursor) key to enter the picture
by picture menu.
‰
appears on screen.
l To repeat the currently playing title, press REPEAT
a second time
‰ The recorder will now go into pause mode.
‰
appears on screen.
l To repeat the entire disc, press REPEAT a third
time
‰
appears on screen.
l To exit repeat mode, press REPEAT a fourth time.
l Use t u (left right cursor) keys to select previous
or next picture.
l Press 2 PLAY to exit picture by picture mode.
l Press v (up cursor) to exit the picture by picture
menu.
Video CDs - Repeat track/disc
l To repeat the currently playing track, press
REPEAT.
‰
appears on screen.
l To repeat the entire disc, press REPEAT a second
You can also step forward by using the ; PAUSE
repeatedly on the remote control.
time.
‰
appears on screen.
l To exit repeat mode, press REPEAT a third time.
Search
Repeat A-B
To repeat or loop a sequence in a title:
l Press REPEAT A-B at your chosen starting point;
l Select
(Fast motion) in the system menu bar.
l Use the w (down cursor) keys to enter the fast
motion menu.
‰
appears on screen.
l Press REPEAT A-B again at your chosen end
point;
‰
repeat appears on screen, and the repeat
sequence begins.
l To exit the sequence, press REPEAT A-B.
l Use the t u (left right cursor) keys to select the
required speed: ‘-32’, ‘-
’, ‘32’ (forward).
l Select ‘ ’ to play at normal speed again.
l Press 2 PLAY to exit fast motion mode.
8’ or ‘-4’ (backward); ‘4’,
‘8
1
l Press v (up cursor) to delete the fast motion menu.
To search forward or backward through different speeds,
you can also press 5REVERSE or 6 FORWARD
again.
36 PLAYBACK
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan
Zoom
Plays the first 10 seconds of each chapter/index on the
disc.
l Press SCAN.
l To continue play at your chosen chapter/index,
press SCAN again or press 2 PLAY.
Time search
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
l Select a ZOOM in the system menu bar.
l Press w v (down up cursor) to activate the Zoom
function and select the required zoom factor; 1.33
or 2 or 4.
The Time Search function allows you to start playing at
any chosen time stamp.
l Select
(Time Search) in the system menu bar.
l Press w (down cursor).
‰ The recorder will now go into pause mode.
‰ A time entry box appears on the screen showing
the elapsed playing time of the current disc.
‰ The recorder will go into pause mode.
‰ The selected zoom factor appears below the
Zoom icon in the system menu bar and ‘Press OK
to pan’ appears below the system menu bar.
press OK to pan
l Use the digit keys 0-9 to enter the required start
time. Enter hours, minutes and seconds in the box.
‰ Each time an item has been entered, the next
item will be highlighted.
l Press OK to confirm the start time.
‰ The time entry box will disappear and play starts
from the selected time position.
‰ The picture will change accordingly.
l Press OK to confirm the selection.
‰ The panning icons appear on the screen:
w v u t (down up right left cursor) and OK.
l Use the w v u t (down up right left cursor) keys
to pan all over the screen.
l When OK is pressed only the zoomed picture will
be shown on the screen.
l If you wish to zoom at any moment, press
a ZOOM and select the required zoom factor as
described above.
l Press 2 PLAY to exit zoom mode.
PLAYBACK 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Angle
Special DVD+RW/+R features
If the disc contains sequences recorded from different
camera angles, the angle box appears, showing the
number of available angles, and the angle being shown.
You can then change the camera angle if you wish.
Recording date and time
If a recording was made from a digital camcorder using
the i.LINK DV input, the original recording date and
time are automatically stored as DVD subtitles.
l Press Z SUBTITLE to display the recording date
and time.
‰ The recording date and time are displayed in the
right bottom corner of the screen.
Special DVD-Video features
l Use the w v keys to select the required angle in the
angle box.
l To go to any angle directly, enter the angle number
using the numerical keys 0-9.
Menus on the disc
For titles and chapters, selection menus may be included
on the disc.
The DVD’s menu feature allows you to make selections
from these menus. Press the appropriate numerical key;
or use the w v u t (down up right left cursor) keys to
highlight your selection, and press OK.
‰ After a small delay, play changes to the selected
angle. The angle box remains displayed until multiple
angles are no longer available.
Changing the audio language
Title menus
l Select Y (Audio) in the system menu bar.
l Press Y AUDIO or w v (down up cursor)
repeatedly to step through the different languages.
l You can enter the required language number directly
using the numerical keys 0-9.
l Press DISC MENU.
‰ If the current title has a menu, this appears on
the screen. If no menu is present in the title, the
disc menu will be displayed.
l The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
l To exit the title menu, press DISC MENU again.
Note:
Most DVD discs do not have separate disc and title menus.
Disc menu
If a DVD-Video disc has separate disc and title menus,
you can navigate to the disc menu as follows:
l Press T/C followed by DISC MENU.
‰ The disc menu is displayed.
l To remove the disc menu, press DISC MENU
again.
38 PLAYBACK
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitles
Special VCD features
Playback Control (PBC)
l Select Z (Subtitle) in the system menu bar.
l Press Z SUBTITLE or w v (down up cursor)
repeatedly to step through the different subtitles, or
to switch the subtitles off.
l You can enter the required subtitle number directly
using the numerical keys 0-9.
l Make sure PBC is switched ‘On’. See ‘User
Preferences-features settings’.
l Load a (Super) Video CD with PBC and press
2 PLAY.
‰ The PBC menu appears on screen.
l Go through the menu with the keys indicated on the
TV screen until your chosen passage starts to play.
If a PBC menu consists of a list of titles, you can
select a title directly.
l Enter your choice with the numerical keys 0-9.
l Press RETURN to go back to the previous menu.
Playing an audio CD
l Insert the disc.
‰ After loading the disc, playback starts
automatically.
‰ If the TV set is on, the Audio CD screen appears.
‰ During play, the current track number and its
elapsed playing time will be shown on the screen
and the recorder display.
Audio disc mode
repeat track
1
2 78
14
1 12 78
play
track
time
total tracks
total time
l To stop play at any time, press 9 STOP.
‰ The number of tracks and the total playing time
will be shown on the screen and the recorder
display.
PLAYBACK 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Pause
Repeat track/disc
l Press ; PAUSE during play.
l To return to play, press 2 PLAY.
l To repeat the currently playing track, press
REPEAT.
‰ ‘Repeat track’ appears on screen.
l To repeat the entire disc, press REPEAT a second
time.
Search
‰ ‘Repeat disc’ appears on screen.
l To exit repeat mode, press REPEAT a third time.
Repeat A-B
l To search forwards or backwards through the disc
at 4x normal speed, press 5 REVERSE or 6
FORWARD.
‰ Search begins.
l To step up to 8x normal speed, press 5 REVERSE
or 6 FORWARD again.
‰ Search goes to 8x speed, and the sound is muted.
l To return to 4x normal speed, press 5 REVERSE
or 6 FORWARD again.
l If the TV set is on, search speed and direction are
indicated on the screen each time 5 REVERSE or
6 FORWARD is pressed.
To repeat or loop a sequence:
l Press REPEAT A-B at your chosen starting point;
‰ ‘Repeat A’ appears on screen.
l Press REPEAT A-B again at your chosen end
point;
l To end the search, press 2 PLAYor 9 STOP as
desired.
‰ ‘Repeat A
-B’ appears on the display, and the
repeat sequence begins.
l To exit the sequence, press REPEAT A-B again.
Moving to another track
Scan
l Press K NEXT during play to step forward to the
next track.
l Press J PREVIOUS during play to return to the
beginning of the current track. Rapidly press
J PREVIOUS twice to step back to the previous
track.
Plays the first 10 seconds of each track on the disc.
l Press SCAN.
l To continue play at your chosen track, press SCAN
again or press 2 PLAY.
l To go directly to any track, enter the track number
using the numerical keys 0-9.
40 PLAYBACK
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an MP3 disc
The DVD Recorder can play MP3 CDs that comply with
the following constraints:
l File system: ISO9660
Audio disc mode
MP3
Play
Album
11
Track
2 12
Time
5. 29.78
l Maximum 30 characters
l Maximum 8 levels of nested directories
l Maximum 32 albums
It supports variable bit rates including 32, 64, 96, 128,
192 and 256 kbps, and sampling rates of 32 kHz, 44.1
kHz and 48 kHz. Of a multi-session disc, only the first
session will be played.
Album
Track
Artist
Qat collection
Higher Ground
Sasha
The following formats are not supported:
l files with extensions *.WMA, *.AAC, *.DLF, *.M3U,
*.PLS
l To stop play at any time, press 9 STOP.
‰ The number of albums will be shown on the
screen and the recorder display.
l Chinese filenames.
l Discs of which the session is not closed.
l Discs recorded with the UDF file system.
Pause
Downloading MP3 files from the Internet or copying
songs from your own discs is a delicate process.
Sound
Approximate Approximate total
Quality
Reduction Ratio
MP3-CD time
Comment
Bit Rate
l Press ; PAUSE during play.
32 kbps
64 kbps
96 kbps
128 kbps
256 kbps
320 kbps
40:1
20:1
15:1
10:1
5:1
40 hrs
20 hrs
15 hrs
10 hrs
5 hrs
Sound quality significantly affected
- not recommended.
Balanced sound quality
- compression rate
Compression rate low
- suggest to play CD's instead
AM radio
FM radio
Near-CD
CD-like
CD
l To return to play, press 2 PLAY.
Moving to another album/track
3:1
3 hrs
CD
Notes:
You may experience an occasional “skip” while listening to
your MP3 files.
The disc reading time may exceed 10 seconds due to the
large number of songs compiled onto one disc.
In compliance with the SDMI, the digital output is muted
while playing MP3 discs.
Due to the recording nature of Digital Audio MP3 (DAM),
only Digital Audio music will play.
l In play mode you can use the J PREVIOUS / K
NEXTkeys and the numerical keys 0-9 to select a
specific track.
l In stop mode you can use the numerical keys 0-9 to
select a specific album.
Play
l To select another album while in play mode press
T/C to select the
icon on the system menu bar.
You can then move to another album with the
l Insert the disc.
‰ After loading the disc, playback starts
automatically.
cursor w v keys or the numerical keys 0-9.
Repeat Album/Track/Disc
If the TV set is on, the MP3 screen appears.
During play, the current album and track number
and its elapsed playing time will be shown on the
screen and the recorder display. On screen, also the
names of the album, the track and the artist are
shown.
l To Rreeppeeaattattrraacckk, press REPEAT.
‰
appears on the screen.
l To Rreeppeeaattanalablubumm, press REPEAT a second time.
‰
appears on the screen.
l To repeat the entire disc, press REPEAT a third
time.
‰
Repeat disc appears on the screen.
l To exit REPEAT mode, press REPEAT a fourth
time.
‰
Repeat off appears on the screen.
PLAYBACK 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Access control
l Select Ç using wv (down up cursor).
l Press OK or t (left cursor) to confirm and press
SYSTEM MENU again to exit the menu.
‰ Now unauthorized discs will not be played unless
the 4-digit code is entered.
Child Lock (DVD and VCD)
When activating Child lock, only discs that are authorised
can be played without PIN code.
The recorder memory maintains a list of 50 authorized
(‘Child safe’) disc titles. A disc will be placed in the list
when ‘Play Always’ is selected in the ‘Child protect’ dialog.
Each time a ‘Child safe’ disc is played it will be placed on
top of the list. When the list is full and a new disc is added,
the least recently used will be removed from the list.
l Select É to deactivate the Child Lock.
Note:
Reconfirmation of the 4-digit PIN code is necessary when:
The code is entered for the very first time (see above);
The code is changed (see ‘Changing the 4-digit code’);
The code is cancelled (see ‘Changing the 4-digit code’);
Both Child Lock and Parental Control are switched Off and
the code is requested.
Activating/deactivating the child lock
Authorizing discs when Child Lock is
activated
l Insert the disc.
‰ The ‘Child protect’ dialog will appear. You will be
asked to enter your secret code for ‘Play once’ or
‘
Play always’. If you select ‘Play once’, the disc
l Select ‘Access control’ in the features menu using
can be played as long as it is in the recorder and the
recorder is in the On position. If you select ‘Play
always’, the disc will become Child safe
(authorized) and can always be played even if the
Child lock is set to ‘On’.
wv(down up cursor) and press u(right cursor).
off
on
off
Access control
Status box
Enter code
Access Control
locked
Autoresume
Low power standby
PBC
Play once
Play always
l Enter a 4-digit PIN code of your own choice using
the digit keys 0-9.
l Enter the code a second time.
l Move to ‘Child lock’ using wv (down up cursor).
l Move to Ç / É using the u (right cursor) key.
Note:
Double sided DVD discs may have a different ID for each
side. In order to make the disc ‘Child safe’, each side has to
be authorized.
Multi volume VCD disc may have a different ID for each
volume. In order to make the complete set ‘Child safe’, each
volume has to be authorized.
off
on
off
Child lock
u
Access control
Status box
Parental level
Securing discs
Change country
Change code
Autoresume
Low power standby
PBC
l Insert the disc.
‰ Playback starts automatically.
l Press 9 STOP while { is visible.
‰ | will appear and the disc is now banned i.e. it is
not Child safe any longer.
42 ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Level (DVD-Video only)
Country
Movies on pre-recorded DVD discs may contain scenes
not suitable for children. Therefore discs may contain
‘Parental Control’ information which applies to the
complete disc or to certain scenes on the disc.
These scenes are rated from 1 to 8 and alternative, more
suitable scenes are available on the disc. Ratings are
country dependent. The ‘Parental Control’ feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
l Select ‘Access control’ in the features menu using
wv(down up cursor) and press u(right cursor).
l Enter the four digit PIN code.
Activating/Deactivating Parental Control
l Move to ‘Change country’ using w (down cursor).
l Press u (right cursor).
off
on
off
Austria
Access control
Status box
Belgium
Denmark.
Finland
l Select ‘Access control’ in the features menu using
wv(down up cursor) and press u(right cursor).
l Enter your 4-digit PIN code using the digit keys 0-9.
If necessary enter the code a second time.
l Move to ‘Parental level’ using wv(down up cursor).
l Move to the Value Adjustment bar using u(right
cursor).
Auto resume
Low power standby
PBC
l Select a country using wv (down up cursor).
l Press OK or t (left cursor) to confirm and press
off
on
off
SYSTEM MENU again to exit the menu.
Child lock
u
Access control
Status box
Parental level
Change country
Change code
Autoresume
Low power standby
PBC
l Use the w v (down up cursor) keys or the
numerical keys 0-9 on the remote control to select
a rating from 1 to 8 for the disc inserted.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated. The disc will be played
in full.
Ratings 1 to 8 (1 = childsafe - 8 = adults only):
The disc contains scenes not suitable for children. If you
set a rating for the recorder, all scenes with the same
rating or lower will be played. Higher rated scenes will
not be played unless an alternative is available on the
disc. The alternative must have the same rating or a
lower one. If no suitable alternative is found, play will
stop and the 4-digit code has to be entered.
l Press OK or t (left cursor) to confirm and press
SYSTEM MENU again to exit the menu.
ACCESS CONTROL 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the 4-digit code
l Select ‘Access control’ in the features menu using
wv(down up cursor) and press u(right cursor).
l Enter the old code.
l Move to ‘Change code’ using w (down cursor).
off
on
off
Child lock
u
Access control
Status box
Parental level
Change country
Change code
Autoresume
Low power standby
PBC
l Press u (right cursor).
l Enter the new 4-digit PIN code.
l Enter the code a second time and reconfirm with OK.
l Press SYSTEM MENU to exit the menu.
Note:
If you forgot your code, press 9 STOP four times while in
the access control PIN code box and exit with OK. Access
control is now switched off. You can then enter a new code
as described above.
44 ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing disc content
Title settings
l Press OK to confirm.
‰ ‘Erasing title...’ is shown until the action is
completed.
For each title on a DVD+RW or DVD+R disc the
default settings can be changed to your personal
preference in the title settings menu.
‰ After the title has been erased, the Index Picture
Screen will show an empty space instead. If there
was an empty space in front of or behind this title,
then these are combined into one empty space.
Empty spaces of less then one minute will not be
shown.
Changing the title name
l In the Index Picture Screen, select the required title
with wv (down up cursor).
l Press u(right cursor) to enter the title settings menu.
On DVD+R titles can also be erased but the space
occupied cannot be used anymore. During
finalisation erased titles are removed from the Index
Picture Screen.
Settings for title BBC soccer
Name
Play full title
Erase this title
BBC soccer
Disc Info Screen
l When on the Index Picture Screen, press 9 STOP.
‰ You are now on Title 1.
l Press v (up cursor).
‰ You enter the Disc Info Screen.
l Press w (down cursor) to exit the Disc Info Screen.
The Disc Info Screen contains the following
information:
l Press u (right cursor).
l Enter the new name. A name may contain a
maximum of 64 characters.
l Use t u (left right cursor) for the position of the
characters. Use w v (down up cursor) to change
characters.
Compatibility status
- indicates compatibility of any edits
with DVD players
Video system
- PAL or SECAM
- NTSC
l Use SELECT to toggle between capitals and lower
case characters.
l Use CLEAR to erase a character.
l Confirm by pressing OK.
Disc status
- unlocked
- locked
Disc description
- disc name
- total recording duration
- date of last recording
Play full title
- finalised
l In the Index Picture Screen, select the required title
with wv (down up cursor).
l Press u(right cursor) to enter the title settings menu.
l Select ‘Play full title’.
Summer holiday
02:05: 10 used
S u n 13 12 99
When this item is selected the title will be played in full,
including hidden chapters. Follow the instructions on the
screen. (See ‘managing disc content - Favorite Scene
Selection’)
Unlocked
PAL
DVD playback
Edits
Erasing a title
23: 13 hr
12 B B C 1
You may simply erase a title on DVD+RW by recording
over it, but if you want to erase the whole title instantly,
do the following:
l In the Index Picture Screen, select the required title
with wv (down up cursor).
l Press u(right cursor) to enter the title settings menu.
Cue to go back to the Index Picture
Screen
l Select ‘Erase this title
’.
‰ The message 'This will completely erase this
title', 'Press OK to confirm' is shown.
MANAGING DISC CONTENT 45
Download from Www.Somanuals.com. All Manuals Search And Download.
l Press OK to confirm or t (left cursor) to cancel.
‰ ‘Erasing disc’ is shown until the action is
completed.
Disc Settings
For each DVD+RW or DVD+R disc the settings can be
changed to your personal preference in the disc settings
menu.
‰ After the disc has been erased, the Index Picture
Screen will show the free space on the disc.
l In the Disc Info Screen press u (right cursor).
‰ You will now enter the ‘disc settings’ menu.
Finalising a DVD+R disc
While a DVD+RW disc can be played instantly on most
DVD players, a DVD+R disc can be played only on the
DVD recorder until it is finalised. After finalisation no
changes can be made to the disc anymore.
Changing the Disc Name
l In the Disc Info Screen press u (right cursor).
l In the Disc Info Screen press u (right cursor).
‰ You will now enter the ‘disc settings’ menu.
‰ You will now enter the ‘disc settings’ menu.
Settings for Summer holiday
Disc name
Protection
Erase disc
Summer holiday
Unprotected
Settings for Summer holiday
Summer holiday
Unprotected
Disc name
Protection
Erase disc
Finalise disc
Press OK
l Press u (right cursor).
l Enter the new name. A name may contain a
maximum of 64 characters.
l Select ‘Finalise disc’ and press OK to confirm.
‰ ‘Finalising’ is shown until the action is
completed.
l Use t u (left right cursor) for the position of the
characters. Use wv (down up cursor) to change
characters.
l Use SELECT to toggle between capitals and lower
case characters.
l Use CLEAR to erase a character.
l Confirm by pressing OK.
‰ After finalisation the Index Picture Screen will
appear.
If the DVD+R disc was recorded on a different brand of
DVD recorder you may not be able to access the Disc
Settings screen. In this case you can use the ‘Finalise
disc’ option in the features menu of the user
preferences menu.
Protection of recordings
l In the Disc Info Screen press u (right cursor).
‰ You will now enter the ‘disc settings’ menu.
l Select ‘Protection’ and press u (right cursor).
l Select ‘Protected’ with w v (down up cursor).
l Press OK on the remote control to confirm.
‰ No further changes can be made to the disc.
It will also disable most title/disc settings options, as
well as the complete edit menu.
off
on
off
Features
Access control
Status box
Autoresume
Low power standby
Finalise disc
‰ Future editing is only possible after resetting the
Protection feature to ‘Unprotected’ again.
Erasing a disc
This option is only aivailable for DVD+RW discs that are
not erase-protected.
l In the Disc Info Screen press u (right cursor).
‰ You will now enter the ‘disc settings’ menu.
l Select ‘Erase disc’ and press OK.
‰ The message 'This will erase all titles’ is
displayed.
46 MANAGING DISC CONTENT
Download from Www.Somanuals.com. All Manuals Search And Download.
Making your edits DVD-compatible
Favourite Scene Selection
The basic function of any edit operations is to improve
accessibility and handling of your recordings. For instance:
scenes you do not want to see during playback (e.g.
commercials during a movie) can be marked as chapters
and made hidden. During playback you will see your
recording without the hidden chapters as one sequence.
If one or more titles have been edited (see ‘Favourite
Scene Selection’), then the edits will play on your DVD
recorder, but a DVD player may show the original
versions instead of the edits. You can prepare your
DVD+RW discs so that also a DVD player will show the
edited version. This is not possible with DVD+R discs.
Note:
l If the Disc Settings menu shows the option ‘Make
edits DVD compatible’, select this option. If the
menu does not show this option, then your
DVD+RW disc is already compatible, and no
conversion is needed.
In between the scenes the picture may freeze for a short moment.
Each title consists of chapters. With the FSS menu any
chapter can be made hidden or made visible again.
Normally, during recording, chapter markers are inserted
automatically every five to six minutes (this setting can be
changed in the record settings menu). After the recording
is finished, you can manually add and remove chapter
markers via the FSS menu. Both automatically generated
and manually inserted chapter markers can be removed.
Settings for Summer holiday
Summer holiday
Unprotected
Disc name
Protection
Erase disc
After editing, the modified version of a title is the default
playback version. The original can be accessed via the
Make edits DVD compatible
Press OK
‘
Play full title’ option in the title settings menu. Other
DVD players may still play the original. To guarantee
that the edited version will play on these DVD players,
choose ‘Make edits DVD-compatible’ in the disc
settings menu (only available on DVD+RW discs).
Calling up the FSS menu
l Press OK on the remote control to confirm.
‰ The messages ‘This will take ...’ and ‘Press OK
to confirm’ will appear to indicate how long the
action will take.
l Press OK on the remote control to confirm.
‰ ‘Processing...’ and a progress bar are shown
until the action is completed.
l Play the title you want to edit.
l Press the
FSS key on the remote control.
‰ The video image is overlayed with a transparant
edit menu. Title and chapter information appear in
an information box at the top of the screen.
Note:
The Favourite Scene Selection menu may disappear after
about five minutes if you do not edit any information.
1
1
Favourite scene selection
play
Insert chapter marker
Current chapter
Press OK
Hidden
Delete chapter marker
Delete all chapter markers
New index picture
Divide title
l Use w or v (down up cursor) to toggle through the
menu’s functions.
MANAGING DISC CONTENT 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting chapter markers
Deleting chapter markers
l In play mode press
FSS on the remote control,
You van combine a chapter with the previous chapter in
the current title by deleting the chapter at the beginning
of the current chapter.
to call up the FSS menu.
l Select ‘Insert chapter marker’.
l Press OK on the remote control to insert a marker.
l In play mode press
FSS on the remote control
to call up the FSS menu.
The maximum number of chapter markers is 99.
When this maximum is reached the on-screen message
l Select ‘Delete chapter marker‘.
l Press OK on the remote control to confirm
‰ ‘Deleting marker’ will appear.
‘
Too many chapters’ appears. You have to delete some,
before inserting new chapter markers.
You can delete all chapter markers (manually and
automatically generated) in the current title.
During recording you can add chapter markers by
pressing
FSS on the remote control. The message
l In play mode press
FSS on the remote control
‘Chapter marker inserted’ will appear on the screen.
to call up the FSS menu.
l Select ‘Delete chapter markers‘.
l Press OK on the remote control to confirm
‰ The message ‘This will delete all markers in
this title’ will appear.
l Press OK on the remote control to confirm.
‰ ‘Deleting markers’ will appear.
Changing the index picture
Hiding chapters
You can define the current video frame as a miniature
picture to be used for this title’s entry in the Index
Picture Screen.
Initially all chapters are visible. You can hide chapters or
make them visible again on playback. In FSS mode however
hidden chapters are displayed in a dimmed mode.
l In play mode press
FSS on the remote control
to call up the FSS menu.
l Select ‘New index picture‘.
l In play mode press
FSS on the remote control to
l You can use ; PAUSE and/or x SLOW to
accurately choose the desired picture.
l Press OK on the remote control to confirm.
‰ The message ‘This will update the index
picture’ will appear.
call up the FSS menu.
1
2
l Press OK on the remote control to confirm.
‰ ‘Updating menu’ will appear.
Favourite scene selection
play
Insert chapter marker
Current chapter
Hidden
Delete chapter marker
Delete all chapter markers
New index picture
Divide title
l Select
‘
‘Current chapter
‘’with w or v (down up
cursor).
l Select ‘Visible’ or ‘Hidden’ with the u (right cursor)
key.
l You can toggle between ‘Visible’ and ‘Hidden
’
directly from any line in the FSS menu with the
SELECT key on the remote control.
48 MANAGING DISC CONTENT
Download from Www.Somanuals.com. All Manuals Search And Download.
Dividing a title
Append recording
On a DVD+RW disc you split one title into two
separate titles. (On DVD+R this is not possible.)
This function is only available on DVD+RW discs.
If you want to append a video recording to an earlier
recorded title, do the following.
l On the Index Picture Screen, select the title to
which you want to add a video recording.
l Press 2 PLAY.
l On the Index Picture Screen, select the title you
want to divide.
l At the point where you want to append the title
press ; PAUSE.
l Press 2 PLAY.
l Go to the point where you want to divide the title
and press ; PAUSE.
l To monitor the video input you may press
MONITOR.
l Press RECORD (on the recorder) or REC/OTR
(on the remote control).
l Press
FSS.
‰ The Favourite Scene Selection menu is shown.
l Select ‘Divide title’.
The video recording will now be appended from this
point. Video material beyond this point is overwritten.
This may include titles following the current title.
1
2
Any remaining video material that is not overwritten,
which may include the last part of the original title, is
maintained. You can access these titles from the Index
Picture Screen.
Favourite scene selection
Hidden
play
Insert chapter marker
Current chapter
Delete chapter marker
Delete all chapter markers
New index picture
Divide title
Press OK
l Press OK on the remote control to confirm.
‰ ‘Dividing title...’ is shown until the action is
completed. This divide operation cannot be undone.
The Index Picture Screen will show two titles instead of
one. Both will have the same name. If you want to
change the name, you can do so in the title settings
menu. For one of the two resulting titles, a new index
picture is created.
If you want to divide one title into more than two titles,
use the above procedure several times.
MANAGING DISC CONTENT 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If it appears that the DVD recorder is faulty, first consult this checklist. It may be that something has been overlooked.
Under no circumstances attempt to repair the system yourself; this will invalidate the warranty. Look for the specific
symptom(s). Then perform only the actions listed to remedy the specific symptom(s).
Symptom
Remedy
The recorder does not respond to
the remote control
• The remote control may be configured for a second DVD recorder.
Hold SELECT+1 pressed simultaneously to revert to DVD recorder 1.
• Aim the remote control directly at the sensor on the front of the
recorder.
• Avoid all obstacles which may interfere with the signal path.
• Inspect or replace the batteries.
Keys on the DVD recorder do not work
• The DVD recorder may still be in Virgin mode. See ‘First time set-up:
virgin mode’.
• Otherwise disconnect and reconnect the DVD recorder from the
mains.
• If this does not solve the problem, check if the remote control still
works. If so, the recorder is probably in trade mode.
Disconnect the recorder from the mains and reconnect it while holding
/ OPEN/CLOSE and 9 STOP pressed.
No picture
• Check if the TV set is switched on.
• Check the video connection.
• When the DVD recorder is connected to the TV set via SCART, you
may not see the picture at the DVD recorder after selecting the correct
programme number on your TV set when a timer recording takes place.
This way, you can still view another device (e.g. a satellite receiver).
Distorted picture distorted sound
Recorder does not play disc
• Check the disc for fingerprints and clean with a soft cloth, wiping from
centre to edge.
• Sometimes a small amount of picture distortion may appear. This is
not a malfunction.
• Ensure the disc label is upwards and that the right disc type is inserted.
• Clean the disc.
• Check if the disc is defective by trying another disc.
• Check if the region code of the disc matches the region code of the
recorder. (pre-recorded DVD discs only). See ‘playing a pre-recorded
DVD-Video disc’.
• Check if Child Lock is activated.
Distorted sound from HiFi amplifier
• Check to make sure that no audio connections are made to amplifier
phono input.
• Check to make sure that analogue input of the amplifier is not
connected to the digital output of the DVD recorder.
Distorted or black and white picture with
DVD or Video CD disc
• The disc format is not according to the TV set used (PAL/NTSC).
No audio at digital output
• Check the digital connections.
• Check the settings menu to make sure that the digital output is set to
on.
• Check if the audio format of the selected audio language matches your
receiver capabilities.
Recorder does not respond to all
operating commands during playback
of a DVD-Video disc
• Some operations are not permitted by the disc. Refer to the
instructions in the disc inlay.
50 TROUBLESHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
The recorder does not record
timer programme
• Make sure that the recorder is switched to standby before the timer
starts.
No new title can be recorded
• Check if the maximum number of titles has been reached (message:
‘
too many titles’ on screen). If so, delete a title next to a free space.
• Check if the disc is write protected. If so, unlock the disc in the disc
settings menu (message: ‘Disc locked’ on screen).
• Check if the (DVD+R) disc has been finalized. If so, no new titles can
be recorded anymore.
Service codes on the display
• Clean the disc. The recording was most probably done correctly.
‘Disc warning’ message on screen
• A write error has occured, but it could be corrected. No user action
is required.
‘Disc error’ message on screen
Disc errors
• A write error has occured from which the recorder could not
recover. Inspect the disc and clean it if necessary (refer to ‘Intoduction -
Cleaning discs’ for cleaning instruction). Record (overwrite) again over
the same part of the disc to see if the problem is solved
• A disc might be corrupted because of dust, scratches or fingerprints.
If the disc cannot be accessed anymore, use the back-up disc erase
procedure to repair it. Proceed as follows:
1. Clean the disc.
2. Put disc in the drawer (do not close the tray).
3. Press and hold CLEAR for several seconds until the tray closes.
Two languages are ‘mixed’ when
recording from a stereo VCR
• When the TV set does not automatically detect the dual-language
signal,use left/right audio balance on the TV set to amplify the one or
the other language.
The disc cannot be erased because the
Index Picture Screen does not appear
1. Open the tray while leaving the disc in.
2. Hold CLEAR pressed for around 5 seconds until the tray closes. The
disc is technically not yet erased but you can start a new recording like
on a blank disc.
The Index Picture Screen does not appear • Take out the disc. Clear the disc. Insert the disc.
but the titles on the disc can still be played Choose ‘Adapt to own disc format’ (See ‘User Preferences - Features).
A DVD player shows the Index Picture
Screen but does not react to
the 2 PLAY key
• Press 9 STOP to exit the Index Picture Screen, then press 2 PLAY.
TROUBLESHOOTING 51
Download from Www.Somanuals.com. All Manuals Search And Download.
A DVD+RW disc does not play
on a certain DVD player
• There are DVD Players that will not play recordings made with a DVD
Recorder. With a special procedure the recorder will solve this problem
for some players. Proceed as follows:
1. Put the disc in the drawer (do not close the tray)
2. Press and hold the 2 key on the remote control for several seconds
until the tray closes. The disc is now modified.
3. If the change has no effect, you may perform the same procedure
with the 3 key on the remote control.
Note :
Modifying the disc can solve the problem for a specific player model, but
playback in other DVD players may no longer be possible.
It is therefore recommended to use this procedure carefully and only when
needed.
• To revert the disc to the original state, follow the same procedure
with the 1 key on the remote control0
Note :
To achieve maximum compatibility, make sure the disc contains at least 5
minutes recorded in HQ mode, 10 minutes in SP, 12 minutes in SP+, 15
minutes in LP, 20 minutes in EP or 30 minutes in EP+ mode. For more
information about compatibility with DVD players refer to ‘Troubleshooting’ in
the instructions for Use.
52 TROUBLESHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagnosis programme
System limitations
If the recorder is still faulty you can start the Diagnosis
Programme in the recorder.
DVD+RW and DVD+R discs may not play on certain
DVD Video players.
You can operate the Diagnosis Programme by following
the instructions step by step.
A DVD+RW video disc that has been recorded on a
different type or brand of recorder can be played, but
may not provide all features commonly available to
DVD+RW discs, such as the on-screen disc bar, the disc
settings menu, the title settings menu, and editing.
Refer to ‘Adapt disc format’. If the disc is write-
protected, the status cannot be changed.
Instructions
When using manual recording, the DVD recorder will
warn before adapting the format of the disc or removing
non-video data. When using timer recording however,
the DVD recorder will always start to record, unless the
disc is write-protected. Menus, edits and other data
recorded on a different device (e.g. a PC) may be lost.
l Unplug the power cord of the recorder.
l Press the 2 PLAY key and keep them pressed
while you plug the recorder.
‰ On the display the message ‘BUSY’ appears
together with a counter. This counter indicates the
termination of the test when zero is reached.
‰ After a few minutes the message on the local
display changes over from ‘BUSY’ to ‘FAIL’ or to
‘PASS’.
‰ If the message ‘FAIL’ appears on the display,
there is apparently a failure in your recorder and
your recorder should be repaired.
Because of the Variable Bit Rate, a title map take up less
or more space than the overwritten title, even though
the duration is the same. As a result, a part of the
original title may remain, or a part of the next title may
be lost. The maximum deviation is five minutes.
After a power interruption during recording, the Index
Picture Screen will may not match with the actual video
content on the disc. The last recorded title may be lost.
l Consult your dealer or the Philips Customer Care
Centre for the nearest Service Repair Shop in your
country. The phone number is given in your
warranty booklet.
l If the message ‘PASS’ appears on the display, there
is apparently no failure in your recorder, in this case
the failure can be caused by incorrect interpretation
of the operating instructions or a wrong disc is used
or your recorder is not correctly connected. In this
case you should consult your dealer or the Philips
Customer Care Centre for further assistance in
solving the problem.
l If the problem remains, then consult your Philips
Customer Care Centre.
TROUBLESHOOTING 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
This section explains most important terms, abbreviations, and acronyms used in this document.
Term
Explanation
AC-3
Audio Coding 3, also known as Dolby Digital. Multi-channel digital audio
compression system from Dolby Labs.
A/V
Audio/Video
Chapter
Disc Bar
Disc Pointer
A part of a title.
A graphical representation of the contents of a (DVD+RW) disc.
An arrow indicating the current playback/recording position on the
DVD+RW disc, displayed on the ‘disc bar’.
DTS
DV
Digital Theater System. A high-end Multi-channel audio compression
format.
Digital Video. A camcorder format for high-quality video, different from
MPEG. It is converted into MPEG 2 Video when recorded on DVD+RW
DVD
Digital Versatile Disc
DVD+R
DVD+Recordable. The write-once disc standard used by the DVD
recorder.
DVD+RW
EasyLink
DVD+ReWritable. One of the disc standards used by the DVD
recorder.
If your TV set and your video recorder are equipped with this feature,
they can exchange information to adjust certain settings to each other,
such as the TV channel order and other user preferences.
FSS
Favorite Scene Selection. see ‘Managing disc content’.
i.LINK
Also known as ‘FireWire’ and ‘IEEE 1394’. A cable for transfer of high-
bandwidth digital signals, as used by Digital Video camcorders.
Index Picture Screen
MPEG
A screen that gives an overview of a DVD+RW disc, wih ‘index
pictures’ that each represent a recording.
Motion Picture Experts Group. A collection of compression systems for
digital audio and video.
NEXTVIEW Link
A system that enables easy programming of a video recorder via a TV
set. Also see EasyLink.
NICAM
NTSC
OSD
System for reception of digital stereo TV sound.
See TV system.
On-screen Display. The ‘user interface’ by which you can control the
DVD recorder via the TV screen.
OTR
One-Touch Recording. With this feature you can easily start a
recording (by pushing just one button) and select the switch-off time in
intervals of 30 minutes.
54 GLOSSARY
Download from Www.Somanuals.com. All Manuals Search And Download.
PAL
PBC
See TV system.
Playback Control. A special feature on a VCD 2.0 or Super VCD disc
that enables interactive use.
PCM
PDC
RGB
Pulse Code Modulation. A digital audio encoding system.
Program Delivery Control
Red-Green-Blue. A top-quality video connection where red, green and
blue components of a video signal are carried through separate wires.
SCART cable
Also known as Euro-AV cable. This standard cable is an easy way to
connect various AV devices and televisions. In addition to audio and
video it can carry control signals.
SECAM
S-video
See TV system.
Sometimes also called S-VHS or Super-VHS. A high-quality video
connection standard.
SVCD
Title
Super Video Compact Disc.
It is the name given to the unit of recording on the disc. A title,
typically, represents one recording.
TruSurround
TV system
A system for simulating Multi-channel sound reproduction via a two-
channel set-up, by SRS Labs, Inc.
There are various systems for transmitting television signals, for example
PAL, PAL-I, PAL-BG, SECAM, SECAM-DK, NTSC, etc. The TV system is
country dependant.
VCD
Video Compact Disc
VCR
Video Cassette Recorder
VIDEO Plus+
A system by which you can easily program a timer recording by entering
a nine-digit PlusCode number found next to the programme description
in most TV guides.
VPS
Video Programming System
GLOSSARY 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
If your TV set does not respond to the remote control,
you can re-programme your remote control. Below you
will find a list of all available remote control codes for
various TV brands. The following procedure re-
programmes your remote control:
Using your DVD recorder
remote control with your TV set
Your DVD recorder remote control can transmit
several commands to TV sets of different brands.
The following keys will always operate the TV set:
l Look up the set-up code for your TV set in the
code list below.
l Press and hold the RETURN and SELECT key
simultaneously for at least 3 seconds.
l Release both keys.
l Enter, within 30 seconds, the correct three-digit
code with the digit keys 0-9.
l If the selected code does not work with your TV
set, or if the brand of your TV set is not in the list,
try out the codes one after the other.
- VOL+ increase TV volume
- VOL - decrease TV volume
Alternative procedure:
c
-
mute TV
Some other keys normally operate the DVD recorder,
but will operate the TV set when you keep the button
on the side of the remote control pressed:
l Switch on your television set.
l Press and hold the RETURN and SELECT key
simultaneously for at least 3 seconds.
l Release both keys.
l Point the remote control to your TV set.
l Press and hold the B STANDBY key.
‰ Your TV set switches off when the right code is
found.
l When your TV set switches off, immediately release
the B STANDBY key.
- CH + next TV programme number
- CH - previous TV programme number
- 0 - 9
choose TV channel
- B
switch TV set to standby
‰ Your remote control is now re-programmed.
l This complete procedure may take up to 2 minutes.
Remote control set-up codes BSR. . . . . . . . . . . . . . . . . . . 321
CXC. . . . . . . . . . . . . . . . . . 207
Candle. . . . . . . . . . . . . 057, 083
Carnivale. . . . . . . . . . . . . . . 057
Carrefour . . . . . . . . . . . . . . 063
Carver . . . . . . . . . . . . . . . . 081
Cascade . . . . . . . . . . . . . . . 036
Cathay . . . . . . . . . . . . . . . . 064
Celebrity. . . . . . . . . . . . . . . 027
Centurion . . . . . . . . . . . . . . 064
Cimline . . . . . . . . . . . . . . . . 036
Cineral . . . . . . . . . . . . 478, 119
Citizen . . . . 083, 057, 066, 087,
. . . . . . . . . . . . . . . . . . . . . . 119
Clarivox . . . . . . . . . . . . . . . 064
Clatronic. . . . . . . . . . . . . . . 397
Concerto . . . . . . . . . . . . . . 083
Condor . . . . . . . . . . . . 347, 397
Contec. . . . . 036, 063, 207, 243
Craig. . . . . . . . . . . . . . . . . . 207
Crosley. . . . . . . . . . . . . . . . 081
Crown . . . . 397, 036, 064, 066,
. . . . . . . . . . . . . . . . . . 207, 445
Crystal . . . . . . . . . . . . . . . . 458
Curtis Mathes. . . 087, 057, 066,
. . . . . . 074, 078, 081, 083, 120,
. . . . . . . . . . 172, 181, 193, 478
Cybertron. . . . . . . . . . . . . . 245
Daewoo . . . 119, 046, 401, 478,
. . . . . . . . . . . . . . 036, 064, 066
Dainichi. . . . . . . . . . . . . . . . 245
Dansai. . . . . . . . . . . . . . . . . 064
Dayton . . . . . . . . . . . . . . . . 036
Daytron . . . . . . . . . . . . . . . 046
Decca . . . . . . . . . . . . . 064, 099
Denon. . . . . . . . . . . . . . . . . 172
Dixi. . . . . . . . . . . . . . . 036, 064
Dual Tec. . . . . . . . . . . . . . . 244
Dumont. . . . . . . . 044, 046, 097
Electroband. . . . . . . . . . . . . 027
Elin . . . . . . . . . . . . . . . . . . . 064
Elite. . . . . . . . . . . . . . . 245, 347
Elta . . . . . . . . . . . . . . . . . . . 036
Emerson . . . 263, 207, 205, 206,
. . . . . . 490, 309, 066, 046, 181
Envision. . . . . . . . . . . . . . . . 057
Erres . . . . . . . . . . . . . . 039, 064
Expert. . . . . . . . . . . . . . . . . 233
Ferguson . . . . . . . . . . . 136, 064
Fidelity . . . . . . . . . . . . . . . . 243
Finlux . . 064, 132, 097, 099, 206
for television
BTC . . . . . . . . . . . . . . . . . . 245
Bang & Olufsen . . . . . . . . . . 592
Basic Line . . . . . . . . . . 036, 245
Baur. . . . . . . . . . . 064, 037, 581
Baysonic . . . . . . . . . . . . . . . 207
Beaumark . . . . . . . . . . . . . . 205
Beko . . . . . . . . . . . . . . . . . . 397
Belcor. . . . . . . . . . . . . . . . . 046
Bell & Howell . . . . . . . . . . . 181
Beon . . . . . . . . . . . . . . . . . . 064
Binatone . . . . . . . . . . . . . . . 244
Blaupunkt . . . . . . . . . . . . . . 581
Blue Sky . . . . . . . . . . . . . . . 245
Blue Star . . . . . . . . . . . . . . . 309
Boots . . . . . . . . . . . . . . . . . 244
Bradford . . . . . . . . . . . . . . . 207
Brandt. . . . . . . . . . . . . . . . . 136
Britannia . . . . . . . . . . . . . . . 243
Brockwood. . . . . . . . . . . . . 046
Broksonic . . . . . . . . . . 263, 490
Bush . . 064, 398, 245, 036, 063,
. . . . . . . . . . . . . . 309, 321, 401
CCE . . . . . . . . . . . . . . 064, 244
CS Electronics. . . . . . . . . . . 243
AOC. . . . . . . . . . . . . . 046, 057
Acura . . . . . . . . . . . . . . . . . 036
Admiral . . . . . . . . . . . . 120, 490
Adyson . . . . . . . . . . . . . . . . 244
Aiko . . . . . . . . . . . . . . . . . . 119
Akai . . . . . . . . . . . . . . . . . . 057
Akura . . . . . . . . . . . . . 245, 291
Alaron. . . . . . . . . . . . . 206, 243
Alba . . . 064, 036, 245, 063, 398
Allorgan . . . . . . . . . . . . . . . 321
America Action. . . . . . . . . . 207
Amplivision . . . . . . . . . . . . . 244
Amstrad. . . . 198, 398, 036, 064
Anam . . . . . . . . . . . . . 207, 036
Anitech . . . . . . . . . . . . . . . . 036
Arcam . . . . . . . . . . . . . 243, 244
Asuka . . . . . . . . . . . . . . . . . 245
Atlantic . . . . . . . . . . . . . . . . 233
Audiosonic . . . . . . . . . 064, 136
Audiovox. . . . . . . 119, 207, 478
Autovox . . . . . . . . . . . . . . . 233
BPL . . . . . . . . . . . . . . . . . . . 309
56 APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
Firstline. . . . 348, 036, 243, 244,
. . . . . . . . . . . . . . . . . . . . . . 321
Fisher . . . . . . . . . 244, 181, 397
Flint. . . . . . . . . . . . . . . . . . . 482
Formenti . . . . . . . . . . . 347, 064
Frontech . . . . . . . . . . . 458, 291
Fujitsu . . . . . . . . . 206, 099, 233
Funai . . 321, 198, 206, 207, 291
Futuretech . . . . . . . . . . . . . 207
GE. . . . 048, 074, 078, 205, 478,
. . . . . . . . . . . . . . . . . . 120, 309
GEC . . . . . . . . . . 099, 064, 244
GPM . . . . . . . . . . . . . . . . . . 245
Geloso . . . . . . . . . . . . . . . . 036
Genexxa . . . . . . . . . . . . . . . 245
Gibralter . . . . . . . 044, 046, 057
GoldStar . . . 064, 046, 057, 205,
. . . . . . . . . . . . . . 244, 083, 136
Goodmans . . . . . 064, 099, 206,
. . . . . . . . . . 398, 063, 244, 401
Gorenje. . . . . . . . . . . . . . . . 397
Gradiente . . . . . . . . . . 083, 080
Granada. . . . . . . . 064, 099, 244
Grandin. . . . . . . . . . . . . . . . 309
Grundig . . . . . . . . 097, 581, 064
Grunpy . . . . . . . . . . . . 206, 207
HCM . . . . . . . . . . . . . . 036, 309
Hallmark . . . . . . . . . . . . . . . 205
Hanseatic. . . . . . . . . . . 064, 347
Harley Davidson . . . . . . . . . 206
Harman/Kardon . . . . . . . . . 081
Harvard. . . . . . . . . . . . . . . . 207
Hinari . . . . . 036, 063, 064, 245,
. . . . . . . . . . . . . . . . . . . . . . 206
Hisawa. . . . . . . . . . . . . 309, 482
Hitachi. . . . . 136, 071, 172, 244,
. . . . . . . . . . . . . . 063, 083, 132
Huanyu . . . . . . . . . . . . 243, 401
Hypson . . . . . . . . 291, 064, 309
ICE . . . . . . . . . . . 244, 291, 398
ICeS . . . . . . . . . . . . . . . . . . 245
ITS . . . . . . . . . . . . . . . . . . . 398
Imperial . . . . . . . . . . . . 445, 397
Indiana. . . . . . . . . . . . . . . . . 064
Infinity. . . . . . . . . . . . . . . . . 081
Inno Hit. . . . . . . . . . . . . . . . 099
Innova . . . . . . . . . . . . . . . . . 064
Inteq . . . . . . . . . . . . . . . . . . 044
Interfunk . . . . . . . . . . . . . . . 064
Intervision . . 064, 129, 244, 291
Isukai. . . . . . . . . . . . . . . . . . 245
JBL . . . . . . . . . . . . . . . . . . . 081
JCB . . . . . . . . . . . . . . . . . . . 027
JVC . . . . . . . 080, 063, 398, 680
KEC . . . . . . . . . . . . . . . . . . 207
KTV . . . . . . . 207, 244, 057, 066
Kaisui . . 245, 244, 036, 243, 309
Kamp . . . . . . . . . . . . . . . . . 243
Kapsch . . . . . . . . . . . . . . . . 233
Kawasho . . . . . . . . . . . . . . . 243
Kendo . . . . . . . . . . . . . . . . . 064
Kenwood. . . . . . . . . . . 057, 046
Kingsley. . . . . . . . . . . . . . . . 243
Korpel. . . . . . . . . . . . . . . . . 064
Koyoda . . . . . . . . . . . . . . . . 036
LG. . . . . . . . . . . . . . . . . . . . 083
LXI. . . . 181, 074, 081, 183, 205
Leyco . . . . . . 099, 064, 291, 321
Liesenk & Tter . . . . . . . . . . 064
Luma. . . . . . . . . . . . . . . . . . 233
Luxman . . . . . . . . . . . . . . . . 083
M Electronic . . . . 132, 244, 036,
. . . . . . . . . . . . . . 064, 136, 401
MGA . . . . . . 177, 046, 057, 205
MTC. . . 087, 057, 046, 083, 243
Magnadyne . . . . . . . . . . . . . 129
Magnafon. . . . . . . . . . . . . . . 129
Magnavox. . . 081, 057, 063, 206
Manesth. . . . . . . . 347, 244, 291
Marantz . . . . . . . . 064, 081, 057
Mark . . . . . . . . . . . . . . . . . . 064
Matsui . 036, 064, 244, 398, 062,
. . . . . . . . . . . . . . 063, 099, 321
Matsushita . . . . . . . . . . 277, 677
Mediator . . . . . . . . . . . 039, 064
Megatron. . . . . . . . . . . 172, 205
Memorex . . 205, 036, 083, 177,
. . . . . . . . . . . . . . 181, 277, 490
Midland . . . . 044, 066, 074, 078
Minerva . . . . . . . . . . . . 097, 581
Minutz. . . . . . . . . . . . . . . . . 048
Mitsubishi . . 063, 135, 177, 205,
. . . . . . . . . . . . . . . . . . 046, 120
Mivar. . . . . . . . . . . . . . . . . . 243
Motorola. . . . . . . . . . . . . . . 120
Multitech. . . 036, 129, 207, 243,
. . . . . . . . . . . . . . . . . . . . . . 244
NAD . . . . . . . . . . 183, 193, 205
NEC. . . 057, 063, 046, 083, 482
NEI . . . . . . . . . . . . . . . 064, 458
NTC . . . . . . . . . . . . . . . . . . 119
Neckermann . . . . . . . . 064, 581
Nesco . . . . . . . . . . . . . . . . . 206
Netsat. . . . . . . . . . . . . . . . . 064
Nikkai . 064, 062, 245, 099, 243,
. . . . . . . . . . . . . . . . . . . . . . 291
Nikko . . . . . . . . . 205, 057, 119
Nobliko. . . . . . . . . . . . . . . . 129
Nordmende . . . . . . . . . . . . 136
Onwa . . . . . . . . . . . . . . . . . 207
Optimus. . . . 277, 193, 181, 677
Optonica . . . . . . . . . . . 120, 192
Orion . 321, 490, 064, 206, 263,
. . . . . . . . . . . . . . . . . . 347, 348
Osaki . . . . . . 099, 244, 245, 291
Oso. . . . . . . . . . . . . . . . . . . 245
Osume . . . . . . . . . . . . . . . . 099
Otto Versand . . . 064, 037, 063,
. . . . . . . . . . . . . . 244, 347, 581
Palladium . . . . . . . . . . . 397, 445
Panama . . . . . . . . . . . . 244, 291
Panasonic. . . . . . . 078, 277, 677
Pathe Cinema . . . . . . . 347, 243
Pausa. . . . . . . . . . . . . . . . . . 036
Penney . . . . 074, 087, 057, 048,
. . . . . . . . . . 205, 078, 066, 046,
. . . . . . . . . . . . . . . . . . 083, 183
Perdio . . . . . . . . . . . . . . . . . 347
Philco . . 172, 046, 057, 081, 490
Philips. . 064, 039, 081, 401, 581
Phonola . . . . . . . . . . . . 064, 039
Pilot. . . . . . . . . . . 046, 057, 066
Pioneer . . . . . . . . . . . . 136, 193
Portland. . . . . . . . 046, 066, 119
Prism. . . . . . . . . . . . . . . . . . 078
Profex . . . . . . . . . . . . . . . . . 036
Proline . . . . . . . . . . . . . . . . 348
Proscan . . . . . . . . . . . . . . . . 074
Protech . . . . 064, 129, 036, 458,
. . . . . . . . . . . . . . 244, 291, 445
Proton. . . . . . . . . . . . . . . . . 205
Pulsar . . . . . . . . . . . . . 044, 046
Pye . . . . . . . . . . . . . . . . . . . 039
Quasar. . . . . 078, 277, 192, 677
Quelle . . . . . 064, 097, 037, 581
Questa . . . . . . . . . . . . . . . . 063
R-Line . . . . . . . . . . . . . . . . . 064
RBM . . . . . . . . . . . . . . . . . . 097
RCA. . . 074, 046, 078, 117, 120
Radio Shack . . . . 192, 207, 057,
. . . . . . . . . . 205, 066, 181, 046,
. . . . . . . . . . . . . . . . . . 074, 083
Radiola . . . . . . . . . . . . 064, 039
Rank Arena . . . . . . . . . . . . . 063
Realistic. . . . 192, 207, 181, 057,
. . . . . . . . . . 066, 205, 046, 083
Revox . . . . . . . . . . . . . . . . . 064
Rex . . . . . . . . . . . . . . . 233, 291
Rhapsody. . . . . . . . . . . . . . . 243
Roadstar . . . 036, 291, 245, 445
Runco . . . . . . . . . . . . . 044, 057
SBR . . . . . . . . . . . . . . . 039, 064
SEG . . . . . . . . . . . 244, 063, 291
SEI . . . . . . . . . . . . 129, 037, 321
SKY. . . . . . . . . . . . . . . . . . . 064
SSS . . . . . . . . . . . . . . . 046, 207
Saba. . . . . . . . . . . . . . . . . . . 136
Saisho . . . . . . . . . 036, 291, 458
Sambers . . . . . . . . . . . . . . . 129
Sampo . . . . . . . . . . . . . 057, 066
Samsung . . . 064, 046, 205, 244,
. . . . . . . . . . 291, 397, 036, 057,
. . . . . . . . . . 066, 083, 087, 117
Samsux . . . . . . . . . . . . . . . . 066
Sandra. . . . . . . . . . . . . . . . . 243
Sansei . . . . . . . . . . . . . . . . . 478
Sansui . . . . . . . . . . . . . . . . . 490
Sanyo. . . . . . . . . . 181, 063, 099
Schneider. . . . . . . 064, 245, 398
Scimitsu. . . . . . . . . . . . . . . . 046
Scotch. . . . . . . . . . . . . . . . . 205
Scott. . . 263, 046, 205, 206, 207
Sears . . 181, 083, 183, 074, 081,
. . . . . . . . . . . . . . 198, 205, 206
Seleco . . . . . . . . . . . . . . . . . 233
Semivox . . . . . . . . . . . . . . . 207
Semp. . . . . . . . . . . . . . . . . . 183
Sentra . . . . . . . . . . . . . . . . . 062
Sharp . . . . . . 120, 192, 063, 066
Shogun . . . . . . . . . . . . . . . . 046
Shorai . . . . . . . . . . . . . . . . . 321
Siarem. . . . . . . . . . . . . . . . . 129
Siemens . . . . . . . . . . . . 581, 064
Silver. . . . . . . . . . . . . . . . . . 063
Sinudyne . . . . . . . 129, 037, 321
Sonoko . . . . . . . . . . . . 036, 064
Sontec. . . . . . . . . . . . . . . . . 064
Sony. . . . . . . . . . . 037, 063, 027
Soundesign. . . . . . 205, 206, 207
Soundwave . . . . . . . . . 064, 445
Squareview. . . . . . . . . . . . . 198
Standard . . . . . . . 244, 245, 036
Starlite. . . . . . . . . . . . . . . . . 207
Stern . . . . . . . . . . . . . . . . . . 233
Sunkai . . . . . . . . . . . . . 321, 348
Supra. . . . . . . . . . . . . . . . . . 083
Supreme . . . . . . . . . . . . . . . 027
Susumu . . . . . . . . . . . . . . . . 245
Sylvania . . . . . . . . . . . . 081, 057
Symphonic. . . . . . . . . . . . . . 198
Sysline . . . . . . . . . . . . . . . . . 064
TMK . . . . . . . . . . . . . . 083, 205
Tandy. . . . . . 245, 099, 244, 120
Tashiko . . . . . . . . . . . . 063, 244
Tatung . . . . . . . . . 099, 244, 064
Tec . . . . . . . . . . . . . . . . . . . 244
Technema . . . . . . . . . . . . . . 347
Technics . . . . . . . 078, 277, 677
Technol Ace . . . . . . . . . . . . 206
Techwood. . . . . . . . . . 078, 083
Teknika . . . . 081, 206, 207, 046,
. . . . . . . 066, 119, 083, 087, 177
Telefunken. . . . . . . . . . 136, 083
Telemeister. . . . . . . . . . . . . 347
Teletech . . . . . . . . . . . . . . . 036
Teleton . . . . . . . . 233, 063, 244
Tensai . . . . . . . . . 245, 321, 347
Texet. . . . . . . . . . . . . . 243, 245
Thomson. . . . . . . . . . . . . . . 136
Thorn . . . . . . . . . 064, 062, 099
Tomashi . . . . . . . . . . . . . . . 309
Toshiba . . . . 062, 183, 063, 097,
. . . . . . . . . . . . . . . . . . 087, 181
Totevision. . . . . . . . . . . . . . 066
Uher . . . . . . . . . . . . . . 233, 347
Ultravox . . . . . . . . . . . . . . . 129
Universum . . 132, 064, 291, 397
Vector Research . . . . . . . . . 057
Vestel . . . . . . . . . . . . . . . . . 064
Victor . . . . . . . . . . . . . . . . . 080
Videotechnic . . . . . . . . . . . . 244
Vidikron . . . . . . . . . . . . . . . 081
Vidtech . . . . . . . . 046, 063, 205
Vision . . . . . . . . . . . . . . . . . 347
Waltham . . . . . . . . . . . . . . . 244
Wards. . . . . 081, 192, 205, 046,
. . . . . . . . . . 048, 057, 083, 206
Watson . . . . . . . . . . . . 347, 064
Watt Radio . . . . . . . . . . . . . 129
Wega . . . . . . . . . . . . . . . . . 063
White Westinghouse . . . . . 347,
. . . . . . . . . . . . . . 064, 243, 490
Yamaha . . . . . . . . . . . . 046, 057
Yoko . . . . . . 244, 064, 291, 458
Zanussi . . . . . . . . . . . . . . . . 233
Zenith . . . . . . . . . 044, 119, 490
APPENDIX 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Customer Care Centers
Luxembourg
tel: 352-404061215
Austria
tel: 43-0810 001 203
Netherlands
tel: 0900-8406
Belgium
tel: 32-2-070 222 303
Norway
tel: 22-748 250
Denmark
tel: 808 82 814
Portugal
tel: 352-1-4163063
Finland
tel: 358-09-6158 0250
Spain
tel: 34-902-113 384
France
tel: 33-1-825 889 789
Sweden
tel: 08 5985 2250
Germany
tel: 49-0-180-535 6767
Switzerland
tel: 0844 800 544
Greece
tel: 30-0-0800-3122 1280
United Kingdom
tel: 44-0-208 665 6350
Ireland
tel: 353-1-7640292
Poland
tel: 48-22-571 0571
Italy
tel: 800-820026 (Toll Free)
58 APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
NOTES 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
60 NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DISC FORMATS SUPPORTED
FRONT CONNECTIONS
i.LINK DV
S-video Input
Video Input
Audio Left/Right Input
Disc type
DVD+RW
DVD+R
DVD-RW (Video mode)
DVD-R
DVD-Video
SVCD
Video CD
Audio CD
MP3 CD
Playback
Recording
IEEE 1394 4-pin
Hosiden 4-pin*
Cinch (yellow)*
Cinch (white/red)*
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
REAR CONNECTIONS
SCART 1
SCART 2
S-video Input
S-video Output
Video Input
CVBS, S-video/RGB-out, Decoder
CVBS, S-video/RGB-in, Decoder
Hosiden 4-pin
Hosiden 4-pin
Cinch (yellow)*
CD-R
CD-RW
Video Output
Cinch (yellow)*
Audio Left/Right Input
Audio Left/Right Output
Digital Audio Output
RF Antenna Input
RF TV Output
Mains
Cinch (white/red)*
Cinch (white/red)*
1 coaxial*, 1 optical
Coaxial 75 ohms
RECORDABLE DISC FORMATS
Medium
DVD+RW: Phase-Change ReWritable
DVD+R: dye-based
12 cm
Coaxial 75 ohms
Standard (IEC type)
Diameter
Capacity (single side)
Recording time
4.7 Gbyte
HQ
SP
60’
9.72 Mbit/s
5.07 Mbit/s
4.06 Mbit/s
3.38 Mbit/s
2.54 Mbit/s
1.69 Mbit/s
*
gold-plated
120’
150’
180’
240’
360’
SP+
LP
EP
EP+
USER INTERFACE
OSD Languages
English, French, German, Dutch, Spanish,
Italian, Swedish
TV STANDARD
Scan Frequency
Number of lines
Playback
Recording
Internal tuner
PAL/SECAM
NTSC
60Hz
525
•
PROGRAMMING
Number of events
Programming mode
Record control and
transmitter identification
Timer programming
50Hz
625
•
6; 1 month; Daily/Weekly
OTR, Remote
PDC, VPS
Manual, VIDEO Plus+, NEXTVIEW Link
•
•
•
–
DISC RECORDING
- Safe Record
- Direct Record
- One-Touch Record (OTR)
- Append
- Divide
- Erase
- Automatic/Manual Chapter Marker insertion
- Disc write lock
- Favorite Scene Selection
- Index Picture Screen
- Custom Index Pictures
VIDEO FORMAT
Digital Compression
MPEG2 for DVD
MPEG1 for VCD
VIDEO RESOLUTION
DVD-Video/DVD+RW(HQ/SP/SP+)
50Hz
60Hz
-Horiz. Resolution
-Vertical Resolution
DVD+RW (LP/EP/EP+)
-Horiz. Resolution
-Vertical Resolution
VCD
720 pixels1
576 lines
720 pixels1
480 lines
360 pixels2
576 lines
360 pixels2
480 lines
- Automatic/Manual Audio Recording Level
-Horiz. Resolution
-Vertical Resolution
352 pixels
288 lines
352 pixels
288 lines
DISC PLAYBACK
- Auto Resume (20 discs)
- Play / Stop / Pause
1
equivalent to 500 lines on your TV
2
equivalent to 250 lines on your TV
- Fast Forward/Backward (3 speeds)
- Step Forward/Backward
- Slow (3 speeds)
VIDEO PERFORMANCE
DA Converter
AD Converter
10-bit
9-bit
- Title / Track Select
- Next / Previous Title / Track / Chapter
- Repeat (Chapter / Title / All) or (Track / All)
- A-B Repeat
Signal handling
Video Output
S-video Output
Components
1 Vpp into 75 Ohm
Y: 1 Vpp into 75 Ohm
C: 0.300 Vpp into 75 Ohm
0.7 Vpp into 75 Ohm
- Intro Scan
- Perfect Still with digital multi-tap filter
- Zoom (x1,33, x2, x4) with picture enhancement
- Pan
RGB Output
AUDIO FORMAT
Analog outputs
* Dolby Digital (Stereo/Dolby Prologic; =’St/DPL’)
* MPEG1 decoded (St/DPL)
* MPEG2 decoded (St/DPL)
GENERAL FUNCTIONALITY
- Cinema Link
- 3D sound (SRS TruSurround)
- Beep Feedback for Remote Control
- Backup Presets & Timer Events: 1 year
- Backup Clock & Calendar: 7 hrs
- Time & Date Download
* (L)PCM (Stereo)
Digital outputs
= according IEC958 for CDDA / LPCM
= according IEC1937 for Dolby Digital and DTS
* Compressed digital: - DTS
- AC3 (Dolby Digital)
POWER SUPPLY
Power Inlet
Power consumption
- MPEG2
220-240 V, 50/60 Hz
Operation
* Decoded: 2 channel 16, 20, 24 bits (44,1kHz, 48kHz, 96kHz)
33 W
3 W
Low-power Standby
AUDIO PERFORMANCE
DA Converter
AD Converter
DVD
24-bit
16-bit
fs 96 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
105 dB
100 dB
110 dB
90 dB
CABINET
Dimensions (W x H x D)
Net Weight
4 Hz - 44 kHz
4 Hz - 22 kHz
4 Hz - 20 kHz
4 Hz - 20 kHz
435 X 107 X 330 mm
5.5 kg
Video CD
Audio CD
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Crosstalk (1kHz)
Distortion/Noise (1kHz)
REMOTE CONTROL
- Universal remote for control of main TV functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Dealer's name, address and signature • Nom, adresse et signature du revendeur • Name,
Anschrift und Unterschrift des Händlers • Naam, adres en handtekening van de
handelaar • Nombre, dirección y firma del distribuidor • Nome, indirizzo e firma
del fornitore • Nome, morada e assinatura do vendedor • Forhandlerens navn, adresse
og underskrift • Återförsäljarens namn, adress och namnteckning • Myyjän nimi,
osoite ja allekirjoitus
type no. of product • Numéro de série du produit
DVDR 990
Date of purchase • Date d'achat • Kaufdatum • Koopdatum • Fecha de compra •
Data da compra • Data di acquisto • Købsdato • Kjøpedato • Inköpsdato • Ostopäivä
day • Jour
month • Mois
year • Année 20
The products and services described herein are not necessarily available in all countries
Due to continuous product improvements this document is subject to change without notice.
©2002 PHILIPS
Printed in Belgium 3104 125 2453.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|