Digital Video Disc Player
O wner’s Manual
DVD702
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• FirstTime Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only
a qualified service person should remove the cover or
attempt to service this device.
USE O F CO N TRO LS O R ADJUSTMEN TS O R
PERFO RMAN CE O F PRO CEDURES OTH ER
TH AN TH O SE SPECIFIED H EREIN MAY
RESULT IN H AZARDO US RADIATIO N
EXPO SURE.
1
The region code for this set is 1.
Since it is usual for DVD movies to be released at
different times in different regions of the world, all
players have region codes and discs can have an optional
region code. If you load a disc of a different region code
to your player, you will see the region code notice on
the screen.The disc will not play and should be
unloaded.
LASER
Type
Wave length
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
Output Power
10 mW (VCD/CD)
60 degree
Beam divergence
N OTE:
PICTURES SH OW N MAY BE DIFFEREN T
BETW EEN CO UN TRIES.
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
Works. Copyright 1992-1997 Dolby Laboratories, Inc. All
rights reserved.
N EVER MAKE O R CH AN GE CO N N ECTIO N S
W ITH TH E POW ER SW ITCH ED O N .
CAUTIO N
VISIBLE AN D IN VISIBLE LASER RADIATIO N
W H EN O PEN AVO ID EXPO SURE TO BEAM
(W ARN IN G LO CATIO N : IN SIDE O N LASER
COVERSH IELD O R TH E BACKPLATE O F SET)
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
“DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
For Customer Use:
Read carefully the information located at the back of your DVD Video Player and enter below the Serial Number. Retain
this information for future reference.
Model No. DVD VIDEO 702
Serial No. __________________________
3
IN DEX
Download from Www.Somanuals.com. All Manuals Search And Download.
General Inform ation
WARNING
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
CAUTION
RIS K OF ELECTRIC S HOCK
DO NOT OPEN
CAUTIO N
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make
any kind of contact with any inside part of this unit.
The set complies with the FCC-Rules, Part 15 and with 21
CFR 1040.10.
This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
Canada
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in
the Radio Interference Regulations of the Canadian
Department of Communications.
AVISO
AVIS
RISQUE DE CHOCS ÉLECTRIQUES
NE PAS OUVRIR
Para reducir el riesgo de fuego o choque eléctrico, no
exponga el aparato a la lluvia o humedad.
Attention: Afin de prévenir le risque de chocs électriques,
ne pas retirer les vis.
Toute réparation devrait être confiée à un personnel qualifié.
ATENCIÓ N
El uso de mando o ajustes o la ejecucción de métodos que
no sean los aquí descritos puede ocasionar peligro de
exposición a radiación.
Ce symbole indique la présence d’une tension
suffisamment élevée pour engendrer un risque de
chocs électriques.
Ce symbole indique que le manuel d’installation
fourni avec l’appareil contient d’importantes
recommandations quant au fonctionnement et
à l’entretien de ce dernier.
El aparato cumple las normas FCC, Parte 15 y 21 CFR
1040.10.
AVIS
Afin de réduire tout risque d’incendie ou de choc
électrique, il ne faut pas exposer cet appareil à la pluie ou à
l’humidité.
AVIS O
RIESGO DE CHOQUE ELÉCTRICO
NO ABRIR
ATTENTIO N
Atención: Para reducir el riesgo de choque elécrico,
no quite la tapa (o el panel posterior).
En su interior no hay piezas que el usuario pueda reparar.
Para servicio dirijase a personal calificado.
L'utilisation des commandes ou réglages ou le non-respect
des procédures ci-incluses peuvent se traduire par une
exposition dangereuse à l'irradiation.
Este símbolo tiene por finalidad advertir al usuario de
la presencia de tensión peligrosa no aislada dentro de
la caja del aparato, que puede ser lo suficientemente
fuerte para constituir un peligro de choque eléctrico.
L'appareil répond aux normes FCC, Part 15 et 21 CFR
1040.10.
Este símbolo sirve para advertir al usuario de la
presencia de instrucciones de manejo y
mantenimiento (servicio) importantes en el manual
que acompaña al aparato.
Canada
Cet appareil numérique n'emet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de Class B prescrites dans le
Règlement sur le Brouillage Radioélectrique édicté par le
Ministère des Communications du Canada.
4
GEN ERAL IN FO RMAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
– Read before operating equipm ent
This product was designed and manufactured to meet strict
quality and safety standards.There are, however, some
installation and operation precautions which you should be
particularly aware of.
9. Do not defeat the safety
purpose of the polarized or
grounding-type plug.A polarized plug
has two blades with one wider than
AC Polarized
Plug
the other.A grounding type plug has two blades and a third
grounding prong.The wide blade or the third prong are
provided for your safety.When the provided plug does not
fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
1. Read these instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2. Keep these instructions –The safety and operating
instructions should be retained for future reference.
10.Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the appar atus.
3. Heed all warnings – All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow all instructions – All operating and use
11.O nly use attachm ents/accessories specified by the
instructions should be followed.
manufacturer.
5. Do not use this apparatus near water – for example,
near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, near a swimming pool, etc.
12.
Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer or sold
with the apparatus.When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
6. Clean only with a dam p cloth. The appliance should
be cleaned only as recommended by the manufacturer.
13.Unplug this apparatus during lightning storms or when
7. Install in accordance with the m anufacturer's
instructions. Do not block any of the ventilation
openings. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface or placed in a
built-in installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as if the power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, or if the unit does not operate normally or has
been dropped.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
15. Battery usage CAUTION –To prevent battery leakage
that may result in bodily injury or damage to the unit:
G
G
Install all batteries correctly, + and - as marked on the unit.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
G
Remove batteries when the unit is not used for a long time.
EL 6475-E001: 00/8
5
IMP O RTAN T SAFET Y IN ST RU C T IO N S
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Int roduct ion
Philips DVD Video Introduction ------------------------- 7
Unpacking ---------------------------------------------------- 7
Remote Control Battery Installation ------------------- 7
Safety Information ------------------------------------------ 7
Cleaning Discs ---------------------------------------------- 7
Funct ional O ver view
Front Panel and Display ----------------------------------- 8
Remote Control -------------------------------------------- 9
Rear Panel --------------------------------------------------10
Prepar at ion
General Notes ---------------------------------------------11
Connecting to a TV ---------------------------------------11
Connecting to Optional Equipment --------------------12
General Explanation --------------------------------------13
On-Screen Display ----------------------------------------13
Temporary Feedback Field Icons -----------------------13
Personal Preferences----------------------------------13-15
O per at ion
Loading Discs-----------------------------------------------16
Playing DVD andVideo CD discs -----------------------16
General Features --------------------------------------16-18
Special DVD Features-------------------------------------18
SpecialVCD Features -------------------------------------19
Playing an Audio CD --------------------------------------19
Program -----------------------------------------------------20
Playing MP3 Recordings ------------------------------20-21
Before Request ing Ser vice
Before Requesting Service -------------------------------22
Specificat ions
Specifications -----------------------------------------------23
Lim it ed W ar r ant y
Limited Warranty --------------------------------------24-25
6
CO N T EN T S
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Philips DVD Video Int roduct ion
Unpacking
Your Philips DVD Video Player will play digital video discs
conforming to the universal DVD Video standard.With it,
you will be able to enjoy full-length movies with true
cinema picture quality, as well as stereo or multi-channel
sound (depending on the disc and your playback setup).
The unique features of DVD Video, such as selection of
sound track, subtitle languages and different camera angles
(again, depending on the disc), are all included.
First check and identify the contents of your DVD Player’s
package.You should have the following items:
–
–
–
–
–
DVD Player
Remote Control with batteries
Audio cable
Video cable
Instructions for use
If any item is damaged or missing, contact your retailer or
Philips.
Keep the packaging material for future transportation.
In addition to DVD Video discs, you will be able to play all
Video CDs and Audio CDs (including finalized CD
Recordable (CD-R) and CD Rewritable (CD-RW)).
DVD Video
Rem ot e Cont rol Bat t er y
Inst allat ion
You will recognize DVD Video discs by the logo shown.
Depending on the material on the disc (a movie, video clips,
a drama series, etc.), the disc may have one or more Titles.
¶
Insert batteries as indicated inside the battery compartment.
DVD-VIDEO DISC
Caution: Do not m ix old and new batteries. Never
m ix different types of batteries (standard, alkaline,
etc.).
TITLE 1
TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2
CHAPTER 3
Video CD
You will recognize Video CDs by this logo.
Audio CD
Audio CDs contain music tracks only.
You will recognize Audio CDs by this logo.
Safet y Infor m at ion
¶
Do not expose the system to excessive moisture, rain, sand,
or heat sources.
In addition, this unit can play a CD-R, CD-RW or MP3 data.
¶
¶
Place the player on a firm, flat surface.
Keep the player away from domestic heating equipment
and direct sunlight.
In a cabinet, allow about 2.5 cm (1 inch) of free space all
around the player for adequate ventilation.
If the DVD Player cannot read CDs/DVDs correctly, use a
commonly available cleaning CD/DVD to clean the lens
before taking the DVD Player to be repaired. Other
cleaning methods may destroy the lens.Always keep the
tray closed to avoid dust on the lens.
Notes:
¶
¶
Depending on the conditions of the recording equipment or
the CD-R/CD-RW, some CD-R/CD-RW can not be played on
this unit.
The unit can not play CD-R/CD-RW that contain no data or
data other than MP3.
¶
¶
¶
The lens may cloud over when the DVD Player is suddenly
moved from cold to warm surroundings. Playing a CD/DVD is
not possible then. Leave the power on for about one hour with
no disc in the unit until normal playback is possible.
Cleaning Discs
¶
¶
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out.
Do not use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for analog
discs.
7
IN T RO DU C T IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional O verview
Front Panel and Display
STAN DBY-O N
; PAUSE
– switches the player to ON or OFF
– interrupts playback
STAN DBY IN DICATO R
– lights red when the player is in Standby
mode (off)
2 PLAY
– starts playback
9 STO P
– stops playback
DISPLAY
– shows the current status of the player
/ O PEN /CLO SE
– opens/closes the disc tray
DISC TRAY
– insert a disc here
MP3 VCD
CD DVD
A
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
Rem ot e Sensor
S PREV
– go to beginning of current title/chapter/
track or to PREVious title/chapter/track
press and hold for a fast reverse search
T N EXT
– go to NEXT title/chapter/track
press and hold for a fast forward search
MP3 VCD
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
Indicates current player function:
Playback, Pause, etc.
MP3 disc inserted
Video CD inserted
TITLE Current Title number
CHP/TRK Current Chapter orTrack number
PROG. PROGRAM playback active
MP3
VCD
CD
RANDO M RANDOM playback active
Audio CD inserted
DVD inserted
ANGLE active
A
B
REPEAT A-B active
DVD
ALL
REPEAT active
8
FU N C T IO N AL O VERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Rem ot e Cont rol
0-9 num er ical key pad
– select numbered items in a
menu
POW ER
– switch DVD Player ON or OFF
POWER
RET URN
DISC MEN U
– access menu of a DVD disc
– remove the DVD Player’s menu
1
4
2
5
8
0
3
6
DISPLAY
– access the On-Screen Display
SYSTEM MEN U
– access or remove DVD Player’s
menu
7
9
RETURN
DISPLAY
T
– search forward* / go to next
chapter or track
DISC
SYSTEM
1 2 3 4
MENU
MENU
– (left/right/up/down) select an
item in the menu
S
– search backward* / go to
beginning of current chapter or
track or go to previous chapter
or track
OK
O K
– acknowledge menu selection
PLAY
STOP
PAUSE
TITLE
* Press and hold key for about two
seconds
STO P ( 9 )
– stops playback
CLEAR MARKER FTS
PLAY ( 2 )
– starts playback
SUBT IT LE
SUBTITLE ANGLE ZOOM AUDIO
– select a subtitle language
PAUSE ( ; )
REPEAT
A-B RANDOM SOUND
AN GLE
– select DVD camera angle
– pause playback temporarily /
frame-by-frame playback
ZO O M
– enlarge video image
CLEAR
– clear a track number on the
PROGRAM menu or a mark on
the MARKER SEARCH menu
AUDIO
– select an audio language (DVD)
or an audio channel (Audio CD)
MARKER
– access or remove MARKER
SEARCH menu
REPEAT
– repeat chapter, track, title, disc
FTS (PRO GRAM)
– access or remove PROGRAM
menu
A-B
– repeat sequence
RAN DO M
– play tracks in random order
T IT LE
– display the Title menu of the
disc if available
SO UN D
– select 3D SURROUND during
disc playback
9
FU N C T IO N AL O VERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
O PTICAL (Digit al audio out jack)
– connect to digital (optical) audio equipment
CO AXIAL (Digit al audio out jack)
– connect to digital (coaxial) audio equipment
AC Power Cord
– connect to a power source
AUDIO O UT (Left /Right ) 1, 2
– connect to an amplifier, receiver or stereo system
VIDEO O UTPUT Swit ch
–
select either S-Video Out or Component Video Out,
depending on how you connected the DVD Player to the TV
S-VIDEO O UT (Y/C)
– connect to a TV with S-Video (Y/C) inputs
CO MPO N EN T VIDEO O UT Y PR/CR PB/CB
– connect to a TV with Y PB/CB PR/CR inputs
VIDEO O UT (CVBS)
– connect to a TV with CVBS video inputs
Caution: Do not touch the inner pins of the jacks
on the rear panel. Electrostatic discharge m ay
cause perm anent dam age to the unit.
10
FU N C T IO N AL O VERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
S-Video (Y/C) connection
Gener al N ot es
1
2
Connect the S-VIDEO OUT jack on the DVD Player to the
S-Video in jack on the TV using an optional S-Video cable
(Y).
Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
¶
¶
¶
Depending on yourTV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
Please refer to the manuals of yourTV,VCR, Stereo System
or other devices as necessary to make the best
connections.
For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See ‘Connecting to
optional equipment.’
Video (CVBS) connection
1
2
Connect the VIDEO OUT jack on the DVD Player to the
video in jack on the TV using the video cable supplied (X).
Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
Caution:
–
Make sure the DVD Player is connected
directly to the TV. Set the TV to the correct video
input channel.
TV
–
Do not connect the DVD Player’s audio out
jack to the phono in jack of your audio system .
Do not connect your DVD Player via your
–
VCR.The DVD im age could be distorted by the
copy protection system .
Connect ing t o a TV
¶
¶
Make one of the following connections, depending on the
capabilities of your existing equipment.
When using the COMPONENTVIDEO OUT jacks, set the
VIDEO OUTPUT switch to COMPONENT.When using
the S-VIDEO OUT jack, set the VIDEO OUTPUT switch to
S-VIDEO.
Z
Y
A
X
Com ponent Video ( Y PR/CR PB/CB)
connection
1
2
Connect the PB/CB PR/CR Y COMPONENTVIDEO OUT
jacks on the DVD Player to the corresponding in jacks on
the TV using an optional PR/CR PB/CB Y cable (Z).
Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
11
PREPARAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Multi-channel sound
Connect ing t o O pt ional
Equipm ent
A digital multi-channel connection provides the best sound
quality. For this you need a multi-channel Audio/Video
receiver that supports one or more of the audio formats
supported by your DVD Player (MPEG 2, Dolby DigitalTM
and DTS). Check the receiver manual and the logos on the
front of the receiver.
Connecting to an am plifier equipped with
two channel analog stereo or Dolby
Surround
W arning:
1
Connect the Left and Right AUDIO OUT jacks of the DVD
Player to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the supplied audio cables (A).
Due to the DTS Licensing agreem ent, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Connecting to an am plifier equipped with
two channel digital stereo (PCM) or to an
Audio/Video receiver equipped with a
m ulti-channel decoder (Dolby Digital™,
MPEG 2 or DTS)
Notes:
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
1
2
Connect one of the DVD Player’s DIGITAL AUDIO OUT
jacks (OPTICAL G or COAXIAL F) to the corresponding
in jack on your amplifier. Use an optional digital (optical G
or coaxial F) audio cable.
– To see the selected audio format of the current DVD in the
Display, press SYSTEM MENU or AUDIO.
You will need to activate the player’s digital output (see
‘Personal Preferences’ on page 14).
AMPLIFIER
G
F
A
Y
Z
X
TV
12
PREPARAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
Gener al Explanat ion
Tem por ar y Feedback Field
Icons
This manual gives the basic instructions for operating the
DVD Player. Some DVDs require specific operation or
allow only limited operation during playback.When this
TITLE
Repeat Title
CHAPT
occurs, the symbol
appears on the TV screen, indicating
Repeat Chapter
that the operation is not permitted by the DVD Player or is
not available on the disc.
ALL
Repeat All
TRACK
Repeat Track
A
B
Repeat A-B
Rem ote control operation
Resume play from this point
¶
Unless stated, all operations can be carried out with the
remote control. Always point the remote control directly at
the player, making sure there are no obstructions between
the remote and the player.
Action prohibited or not available
Corresponding keys on the front panel of the player can
also be used.
Per sonal Preferences
You can set your own personal preferences on the player.
O n-screen display operation
¶
A number of operations can be carried out via the on-
screen display on the screen. Access the on-screen display
by pressing the DISPLAY button on the remote control.
Pressing DISPLAY again will clear the on-screen display
from the screen.
Press 3or 4to select an item; the selected item will be
highlighted.
Press 1or 2to change the setting of an item. For some
functions, the setting will be registered immediately; for
others, OK must be pressed.
General operation
1
2
Press SYSTEM MENU on the remote control.
¶
¶
¶
G
The Personal Preferences menu appears.
Press 3/4to select the desired item.
The screen will show the current setting for the
G
selected item, as well as alternate setting(s).
While the desired item is selected, press B, then 3/4to
select the desired setting.
Press OK to confirm your selection.
The following items can be adapted.
Press SYSTEM MENU to remove the menu when you are
finished.
3
4
5
O n-Screen Display
The following information will appear for about 10 seconds
when you press the DISPLAY button on the remote control.
Picture
DVD
–
TV Aspect
1
1
Title
Chapter
If you have a widescreen (16:9)TV, select 16:9 Wide.
If you have a regular (4:3)TV, select 4:3 Letterbox for a
‘wide-screen’ picture with black bars at the top and bottom
of the screen, or select 4:3 Panscan for a full-height picture
with the sides trimmed. If a disc supports the format, the
picture will be shown accordingly.
0:16:57
Time search
1
ENG
D
Audio language and Digital Audio Output mode
6
CH
OFF
Subtitle language
Angle
1
NORM.
Sound
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Audio CD/Video CD without PBC (Playback Control)
Rating
Tracks
Password
1
TV Aspect
Elapsed playback time
0:16:57
Menu Language
Digital Audio Output
STER.
Audio channel
NORM.
Sound
Others
Video CD with PBC
PBC ON
PBC
Elapsed playback time
0:16:57
STER.
Audio channel
NORM.
Sound
13
PREPARAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Menu Language
Sound
Select the language for the DVD Player’s Menu.This is the
menu you see when you press the SYSTEM MENU button.
–
Digital Audio O utput
Each DVD disc has a variety of audio output options. Set
the player’s Digital Audio Output according to the type of
audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/ PCM” if
you connected the DVD Player’s DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipment
with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected the
DVD Player’s DIGITAL OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder or
MPEG decoder.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
PCM: Select “PCM” if you connected the DVD Player’s
DIGITAL OUT jack to an amplifier or other equipment with
linear PCM only (or Mini Disc (MD) recorder or Digital
Audio Tape (DAT) deck).
O thers
–
Dynam ic Range (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However, you
may wish to compress the dynamic range of the audio
output (the difference between the loudest sounds and the
quietest ones).Then, you may listen to a movie at a lower
volume without losing dialog intelligibility. Set DRC to On
for this effect.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
Sample Freq.
48 KHz
TV Aspect
Menu Language
Digital Audio Output
96KHz
Others
– PBC
Set Playback Control (PBC) to On or Off.
- On:Video CDs with PBC are played according to the
PBC.
- Off:Video CDs with PBC are played the same way as
Audio CDs.
–
Sam ple Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz.When this choice is made, this
unit will automatically convert any 96KHz signals to 48KHz
so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz
signals, select 96KHz.When this choice is made, this unit will
pass each type of signal through without any further
processing.
–
Vocal
Set Vocal to On only when a multi-channel karaoke DVD is
playing.The karaoke channels on the disc will mix into a
normal stereo sound.
DRC Off
Vocal On
PBC On
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
Language
TV Aspect
Menu Language
Digital Audio Output
–
Language (Disc Audio, Disc Subtitle and Disc
Menu)
Select a language for the disc’s Menu,Audio and Subtitle.
Audio language and Subtitle language also can be adapted
using the Menu bar. Press the 3/4buttons to select an
item, then press the 1/2buttons to choose a setting in the
On-Screen Display (menu bar).
Others
Original
English
Disc Audio
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Password
TV Aspect
Menu Language
Digital Audio Output
Chinese
Polish
Hungarian
Russian
Other — — — —
Others
14
PREPARAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control (DVD only)
New
Disc Audio
Disc Subtitle
Disc Menu
— — — —
Movies on DVDs may contain scenes not suitable for
children.Therefore, discs may contain ‘Parental Control’
information that applies to the complete disc or to
certain scenes on the disc.These scenes are rated from 1
to 8, and alternative, more suitable scenes are available on
some discs. Ratings are country dependent.The ‘Parental
Control’ feature allows you to prevent discs from being
played by your children or to have certain discs played with
alternative scenes.
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
–
Changing the 4-digit code
–
Rating
1
2
3
4
5
6
7
8
Press SYSTEM MENU to display the DVD Player’s Menu.
Select Password using the 3/4keys.
While Password is selected, press B.
Enter the old code, then press OK.
Select Change using the 3/4keys.
Press OK.
1
2
3
4
Press SYSTEM MENU to display the DVD Player’s Menu.
Select Rating using the 3/4keys.
While Rating is selected, press B.
Enter your 4-digit password now. Use the numerical keys to
enter your code, then press OK.
Select a rating from 1 to 8 using the 3/4keys.
5
Enter the new 4-digit code, then press OK.
Unlock:
Enter exactly the same code a second time and verify by
pressing OK.
Press SYSTEM MENU to exit the menu.
If you select Unlock, Parental Control is not active.The Disc
will play in full.
9
Ratings 1 to 8:
–
If you forget your 4-digit code
Some discs contain scenes not suitable for children. If you
set a rating for the player, all disc scenes with the same
rating or lower will be played. Higher rated scenes will not
be played unless an alternative scene is available on the disc.
The alternative must have the same rating or a lower one. If
no suitable alternative is found, playback will stop.You must
enter the 4-digit code or change the rating level in order to
play the disc.
If you forget your password, to clear the current password,
follow the procedure below.
1
2
Press SYSTEM MENU to display the DVD Player’s Menu.
Enter the 6-digit number “210499” .
GThe 4-digit password is cleared.“P CLr” appears on the
display.The message will appear if the disc tray is closed. It
will be on the display until you try another feature.
6
Press OK to confirm your rating selection, then press
SYSTEM MENU to exit the menu.
3
Enter a new code as described at left (Password).
–
If a Disc will not play
8
Disc Audio
Disc Subtitle
Disc Menu
7
If you insert a disc that exceeds the rating level you set, you
may see the message "Parental Control Limit." If so, you
must set "Rating" to "Unlock" in the DVD Player menu.
Follow steps 1-6 for Parental Control Rating, choosing
"Unlock" at step 5. After you set "Rating" to "Unlock," the
disc will play as usual.
6
Rating
5
Password
4
TV Aspect
3
Menu Language
Digital Audio Output
2
1
Unlock
Or, you may see this message if you insert a disc that
exceeds the rating level: "The parental setting of this player
prohibits play.Would you like to allow this disc to play?"
Press the 1/2buttons to select "Yes" or "No," then press
the OK button. If you select "No," a message will remind
you that the disc will not play. Press the OPEN/CLOSE
button to remove the disc.
Or, if you select "Yes," next press the numerical keys to
enter your four-digit password, then press the OK button.
The disc will be available for playback as usual.
Others
–
Password
1
To set the Password for the first time, press SYSTEM
MENU to display the DVD Player’s Menu.
Select Password using the 3/4keys.
2
3
4
While Password is selected, press B.
Enter the 4-digit password using the numeric keys (0-9),
then press OK.
5
6
Enter the 4-digit password again to verify it, then press OK.
Notes:
– The messages will vary among discs.
– After you clear a message as described above, the disc will
play as usual. However, if you turn off the DVD Player or open
the disc tray, you will repeat these steps again if you try to play
the same disc later.
Press SYSTEM MENU to remove the menu.
Note: Confirmation of the 4-digit code is necessary when the
code is changed (see ‘Changing the 4-digit code’).
15
PREPARAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
O peration
–
Parental Control Disclaim er
Notes:
– DVDs may have a region code.
This DVD Player features the PARENTAL CONTROL
system, which is intended to be active when playing DVD
discs with certain software coding.This is according to
technical standards adopted by the set maker and disc
content industries.
– Your player will not play discs that have a region code
different from your player.The region code for this player is 1
(one).
Please note that PARENTAL CONTROL will not control a
DVD that does not have the appropriate software coding.
At the time of release of this DVD Player, certain aspects of
the technical standards had not been settled between set
makers and the disc content industries.
For these reasons, Philips cannot guarantee the functioning
of PARENTAL CONTROL and denies any liability
associated with unintended watching of discs.
Gener al Feat ures
Note:
– Unless stated, all operations described are based on remote
control use. Some operations can be carried out using the
DVD Player’s menu.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access to the DVD Player.
POWER
Moving to another TITLE
1
4
2
5
8
0
3
6
When a disc has more than one title, you
can move to another title as follows:
Press DISPLAY when playback is stopped,
then press the appropriate numerical key
(0-9) to select a title number.
7
9
RETURN
DISPLAY
¶
DISC
SYSTEM
Loading Discs
MENU
MENU
1
2
Press OPEN/CLOSE on the front of the player to open the
disc tray.
Load your chosen disc in the tray, with the label facing up.
When a double-sided DVD is inserted, make sure the side
you want to play is facing up.
Press OPEN/CLOSE again to close the tray.
G READING appears on the TV screen, and playback
starts automatically. In some cases, the disc menu might
appear instead.
Moving to another CHAPTER/
TRACK
When a title on a disc has more than one
chapter or a disc has more than one track,
you can move to another chapter/track as
follows:
DISC
SYSTEM
MENU
MENU
OK
PLAY
STOP
PAUSE
TITLE
3
CLEAR MARKER FTS
¶
Press Tor Sbriefly during playback to select the
next chapter/track or to return to the beginning of the
current chapter/track.
Note:
¶
¶
Press Stwice briefly to step back to the previous
chapter/track.
– If ‘Parental Control’ is set and the disc is not within the
‘Rating’ settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see ‘Parental
Control’ on page 15).
To go directly to any chapter during DVD playback, press
DISPLAY.Then, press 3/4 to select C (chapter) (or for a
Video CD, select T for track).Then, enter the chapter/track
number using the numerical keys (0-9).
Playing DVD and Video CD
discs
Note:
– For two-digit numbers, press the keys in rapid succession.
RETURN
DISPLAY
¶
After inserting the disc
and closing the tray,
Slow Motion
0
DISC
SYSTEM
MENU
MENU
¶
¶
¶
Press PAUSE during playback.
GThe player will enter PAUSE mode.
Use the 1/2keys to enter the SLOW
mode.
Use the 1/2keys to select the required speed: ,1/16, ,
1/8, ,1/4 or ,1/2 (backward), or
.1/16, .1/8, .1/4 or .1/2 (forward).
If PAUSE is pressed again, the speed will be set to zero
(PAUSE) and playback will pause.
OK
playback starts automatically, depending on the disc.The
player’s display shows the type of disc loaded, as well as the
disc’s information and playing time.
The disc may invite you to select an item from a menu. If
the selections are numbered, press the appropriate
numerical key; if not, use the 3/4, 1/2keys to highlight
your selection, then press OK.
The number of the current title and chapter are displayed.
Playback may stop at the end of the Title, and you may
return to the disc menu.To go to the next title, press PLAY.
To stop playback, press STOP.
PLAY
STOP
PAUSE
¶
¶
¶
¶
¶
To exit slow motion mode, press PLAY.
Note:
¶
– Slow motion playback in reverse is not applicable forVideo
CD.
GThe default screen will appear.
GThe screen saver picture appears when you leave the
DVD Player in stop mode for about five minutes.
G After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
You can resume playback from the point at which you
¶
stopped playback. If you see the Resume icon
on the
screen when you stop playback, press PLAY to resume
playback from that point.
16
O P ERAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC
SYSTEM
MENU
MENU
Still Picture and Fram e-by-fram e
playback
Repeat A-B
To repeat a sequence in a title:
A
B
PLAY
STOP
PAUSE
TITLE
OK
CLEAR MARKER FTS
SUBTITLE ANGLE ZOOM AUIDO
¶
¶
Press A-B at your chosen starting point.
G A- appears briefly on the TV screen.
Press A-B again at your chosen end point.
PLAY
¶
¶
¶
Press PAUSE during playback.
GThe player will now go into PAUSE mode.
STOP
PAUSE
TITLE
REPEAT
A-B RANDOM SOUND
CLEAR MARKER FTS
You can advance the picture frame by frame by pressing
PAUSE or 3 repeatedly on the remote control.
You can reverse the picture frame by frame by pressing 4
repeatedly on the remote control.
G A-B appears briefly on the TV screen, and the repeat
sequence begins(a-b repeat appears on the player’s display).
To cancel the sequence, press A-B.
¶
Note:
POWER
0:16:57
- : - - : - -
Tim e search
– You can not reverse the picture frame by frame forVideo
CD.
1
4
2
5
8
0
3
6
The Time Search function allows you to
start playing at any chosen time on the disc.
Press DISPLAY during playback.The on-
screen display appears on the screen.
GThe Time Search box shows the elapsed
playing time of the current disc.
7
9
RETURN
DISPLAY
¶
DISC
SYSTEM
Search
MENU
MENU
MENU
MENU
OK
OK
¶
¶
Press and hold Tor Sfor about two
seconds during playback.
GThe player will now go into SEARCH
mode.
Press and hold Tor Srepeatedly to select the
required speed: 5X2, 5X4, 5X16, 5X100 (backward)
or 6X2, 6X4, 6X16, 6X100 (forward).
To exit SEARCH mode, press PLAY.
With aVideo CD, the Search speed changes: 5X2, 5X4,
5X8 (backward) or 6X2, 6X4, 6X8 (forward).
PLAY
STOP
PAUSE
TITLE
CLEAR MARKER FTS
¶
¶
Press 3/4to select the Time Search icon in the on-screen
display.
GThe “-:--:--” appears in the Time Search box.
Use the numerical keys to enter the required start time.
Enter hours, minutes and seconds from left to right in the
box.
G If you enter the wrong numbers, press CLEAR to
remove the numbers you entered.Then enter the correct
numbers.
¶
¶
TITLE
TRACK
Repeat
¶
Press OK to confirm the start time.
PLAY
STOP
PAUSE
TITLE
G Playback starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the
current point.
DVD Video Discs - Repeat Chapter/
Title/O ff
To repeat the currently playing chapter, press
REPEAT.
CLEAR MARKER FTS
SUBTITLE ANGLE ZOOM AUIDO
REPEAT
A-B RANDOM SOUND
¶
¶
¶
Note:
GThe Repeat Chapter icon appears on the TV screen.
To repeat the title currently playing, press REPEAT a second
time.
GThe Repeat Title icon appears on the TV screen.
To exit Repeat mode, press REPEAT a third time.
GThe Repeat O ff icon appears on the TV screen.
– Time Search is not supported forVideo CD.
0
Zoom
DISC
SYSTEM
MENU
MENU
The Zoom function allows you to enlarge
the video image and to move through the
enlarged image.
Press ZOOM during playback or still
playback to activate the Zoom function.
G If you press ZOOM repeatedly, the
magnification level increases up to six times.
Use the 1 2 3 4keys to move through the zoomed
picture.
Press CLEAR to resume normal playback or return to the
paused image.
OK
PLAY
STOP
PAUSE
TITLE
Video CDs - Repeat Track/All/O ff
CLEAR MARKER FTS
¶
¶
¶
¶
To repeat the track currently playing, press REPEAT.
GThe Repeat Track icon appears on the TV screen.
To repeat the entire disc, press REPEAT a second time.
GThe Repeat All icon appears on the TV screen.
To exit Repeat mode, press REPEAT a third time.
GThe Repeat O ff icon appears on the TV screen.
SUBTITLE ANGLE ZOOM AUIDO
REPEAT
A-B RANDOM SOUND
¶
¶
Note:
– On a Video CD with PBC, you must set PBC to Off under
Personal Preference to use the Repeat function. See page 14.
17
O P ERAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
Marker search
You can start playback from a memorized point. Up to nine
points can be memorized.
Special DVD Feat ures
Checking the contents of DVD Video discs:
Menus
To enter a mark, follow these steps.
DVDs may contain menus that allow you to access special
features.To use the disc menu, press the appropriate
numerical key; or, use the 3412keys to highlight your
selection, then press OK.
1
2
3
During disc playback, press MARKER.
GThe MARKER SEARCH menu will appear on the TV
screen briefly.
During playback , press OK when playback reaches the spot
that you want to memorize.
Title m enus
GThe Marker number appears.
To enter additional Marker points, press 1/2until another
empty point on the MARKER SEARCH menu is highlighted,
then press OK.
Repeat steps 2 and 3 to enter up to nine Marker points on
a disc.
¶
PressTITLE.
PLAY
STOP
PAUSE
TITLE
G If the current title has a menu, the menu
will appear on the screen. Otherwise, the
disc menu will be displayed.
CLEAR MARKER FTS
SUBTITLE ANGLE ZOOM AUIDO
REPEAT
A-B RANDOM SOUND
4
5
¶
¶
The menu can list camera angles, spoken
language and subtitle options, and chapters for the title.
To remove the title menu, pressTITLE again.
To remove the MARKER SEARCH menu, press MARKER.
The marked spots will remain in the player’s memory as
long as the disc is not changed.The Marker memory will
remain active if the disc is stopped. It will be lost if the disc
is removed from the player, if the disc tray is opened, or if
the DVD Player is turned off.
Disc m enu
Press DISC MENU.
GThe disc menu is displayed.
To remove the disc menu, press DISC
MENU again.
7
8
0
9
RETURN
DISPLAY
¶
¶
DISC
SYSTEM
MENU
MENU
OK
MARKER SEARCH
Cam era Angle
PLAY
STOP
PAUSE
TITLE
If the disc contains sequences recorded from
different camera angles, the angle icon blinks
on the display.You can then change the
camera angle if you wish.
CLEAR MARKER FTS
–
To Recall a Marked Scene
SUBTITLE ANGLE ZOOM AUIDO
REPEAT
A-B RANDOM SOUND
1
During disc playback, press MARKER.
GThe MARKER SEARCH menu will appear on the screen.
Press 1/2to select a Marker number that you want to recall.
¶
Press ANGLE repeatedly during playback to select a
desired angle.
2
3
Press OK.
GThe number of the current angle appears on the display.
G Playback will start from the Marked scene.
To remove the MARKER SEARCH menu, press MARKER.
4
1
–
To clear a Marked Scene
Changing the audio language
1
2
3
During disc playback, press MARKER.
GThe MARKER SEARCH menu will appear on the screen.
Press 1/2to select the Marker number that you want to
erase.
PLAY
STOP
PAUSE
TITLE
¶
Press AUDIO repeatedly during playback to
hear a different audio language or audio
track.
CLEAR MARKER FTS
SUBTITLE ANGLE ZOOM AUIDO
REPEAT
A-B RANDOM SOUND
1
ENG
D
Press CLEAR.
6 CH
GThe Marker number will be erased from the list.
Repeat steps 2 and 3 to erase additional Marker numbers.
4
5
To remove the MARKER SEARCH menu, press MARKER.
PLAY
STOP
PAUSE
Subtitles
Press SUBTITLE repeatedly during playback
to see the different subtitle languages.
CLEAR MARKER FTS
TITLE
Mem orizing Settings for Viewed disc
(Condition Mem ory)
SUBTITLE ANGLE ZOOM AUIDO
¶
REPEAT
A-B RANDOM SOUND
This player memorizes the last scene for the last disc you
have watched. Settings remain in memory even if you
remove the disc from the player or switch off the player. If
you load a disc that has its settings memorized, the latest
stop position is automatically recalled.
1
ENG
Note:
– If
appears, the feature is not available on the disc.
Notes:
– Settings are stored in memory for use any time.
– Switching of the audio mode, etc., is automatic on some
discs.
– This player does not memorize settings if you switch off the
player when a DVD or title menu appears on theTV screen.
18
O P ERAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
OK
Moving to another track
Special VCD Feat ures
¶
Press Tor Sbriefly during playback
to go to the next track or to return to the
beginning of the current track.
Press Stwice briefly to step back to the
previous track.
PLAY
STOP
PAUSE
TITLE
CLEAR MARKER FTS
Playback Control (PBC)
Load aVideo CD with PBC and press PLAY.
SUBTITLE ANGLE ZOOM AUIDO
¶
¶
¶
¶
Go through the menu with the keys indicated on the TV
screen until your chosen passage starts to play. If a PBC
menu includes titles, you can select a title directly.
Enter your choice with the numerical keys (0-9).
Press RETURN to go back to the previous menu.
You also may set PBC to Off under Personal Preferences.
To go directly to any track, enter the track number using
the numerical keys (0-9) during playback.
¶
¶
¶
Random
Press RANDOM during playback or when
playback is stopped.
PLAY
STOP
PAUSE
TITLE
¶
CLEAR MARKER FTS
SUBTITLE ANGLE ZOOM AUIDO
REPEAT
A-B RANDOM SOUND
GThe unit automatically begins Random
Playback and RANDOM appears on the
display.
Playing an Audio CD
¶
¶
After inserting the Audio CD and closing the
tray, the number of total tracks and the total
playing time of the disc will appear on the display. Press
PLAY to start playback.
During playback, the current track number and its elapsed
playing time will appear on the display.
¶
To return to normal playback, press RANDOM again.
Repeat Track/All
To repeat the track currently playing, press
REPEAT.
G ∫appears on the player display.
To repeat the entire disc, press REPEAT a
second time.
G ALL and ∫appears on the player display.
To exit Repeat mode, press REPEAT a third time.
PLAY
STOP
PAUSE
TITLE
CLEAR MARKER FTS
¶
¶
¶
SUBTITLE ANGLE ZOOM AUIDO
¶
¶
Playback will stop at the end of the disc.
To stop playback at any other time, press STOP.
REPEAT
A-B RANDOM SOUND
Pause
Press PAUSE during playback.
To return to playback, press PLAY.
PLAY
STOP
PAUSE
TITLE
¶
¶
CLEAR MARKER FTS
SUBTITLE ANGLE ZOOM AUIDO
REPEAT
A-B RANDOM SOUND
Repeat A-B
PLAY
STOP
PAUSE
To repeat a sequence:
During disc playback, press A-B at your
chosen starting point.
G A ∫appears on the player display.
Press A-B again at your chosen end point.
G A ∫B appears on the display, and the sequence
begins to play repeatedly.
CLEAR MARKER FTS
TITLE
Search
OK
SUBTITLE ANGLE ZOOM AUIDO
¶
¶
¶
REPEAT
A-B RANDOM SOUND
¶
To search forward or backward through the
disc at two times the normal speed, hold
down Tor Sfor about two seconds
during playback.
G Search begins, and sound is partially muted.
To step up to four times the normal speed, hold down
Tor Sagain.
G Search goes to four times the speed, and the sound is
partially muted.
PLAY
STOP
PAUSE
CLEAR MARKER FTS
TITLE
SUBTITLE ANGLE ZOOM AUIDO
¶
¶
To exit the sequence and return to normal play, press A-B
again.
To step up to eight times the normal speed, hold down
Tor Sagain.
G Search goes to eight times the speed, and the sound is
partially muted.
¶
¶
¶
To return to two times the normal speed, hold down T
or Sagain.
If the TV is on, search speed and direction are indicated on
the screen each time Tor Sis pressed.
To end the search, press PLAY to resume playback or STOP
to stop playback.The search will stop if the beginning or
end of the disc is reached. If the beginning of the disc is
reached, playback may begin again.
19
O P ERAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
–
The restriction of playing MP3
Progr am
Program allows you to store your favorite tracks for a
particular disc in the player memory.
¶
¶
¶
¶
This unit can play up to 200 files per disc. A disc having
more than 200 files cannot be played.
The unit may not play MP3 files in the order that you
recorded them on the disc.
With a multi-session disc, the player plays only the last
session.
¶
¶
A Program can contain 20 tracks.
Program FTS
Step
Total Time
0:00:00
1
It may take over 30 seconds to read the MP3 files,
depending on the contents of the disc.
Clear All
–
The lim itation of indications
¶
¶
Up to 8 characters are displayed for the name of a track.
Characters other than uppercase letters (“A” to “Z”),
numericals (“0” to “9”) and underscore (“_”) may not be
displayed, or may be displayed in different characters.
The elapsed playing time on the display may not be correct
when playing MP3 files.
–
Storing a Program
¶
1
2
Load a disc and stop playback.
Press FTS.
GThe program menu appears on the screen
Tips on recording MP3
3
4
Enter the track number using the numerical keys (0-9).
To enjoy high quality sound, convert to MP3 files with a
sampling frequency of 44.1kHz and a fixed bit rate of 128
kbps.
Press 2to move to the next slot, then repeat step 3 to
enter other tracks.
GThe number of tracks and the playing time of the
program will be shown on the screen.
Press PLAY or OK to exit the screen. Playback will begin
immediately.
To play MP3 files in the order that you recorded
them
5
1
2
3
Writing software that is capable of recording MP3 files in
numerical and alphabetical order is required.
Include a two or three digit number at the beginning of
each file name. (e.g.“01,” “02,” ... or “001,” “002,” ...)
It’s recommended that you use only the root folder (do not
create a child folder under the root folder).
–
Erasing a track from a Program
1
2
Press FTS to display the program menu.
Use 1 2 3 4to select the track number you wish to
erase.
3
Press CLEAR.
G The track number will be erased from the track list.
Glossar y
Extension:
An extension is the last three characters that divide a file
name by a period.The extension shows the attribution of
the file or the software in which the file was created.
–
Erasing the com plete Program
1
Use 1 2 3 4to select Clear All, then press OK.
G The complete Program for the disc will be erased.
Session:
A session is one section on a disc between the beginning of
data and the end of written data.
A multi-session disc has more than two sessions.
Playing MP3 Recordings
The DVD Player can play MP3 format recordings on CD-
ROM, CD-R or CD-RW discs.
Before playing MP3 recordings, read the following notes.
Notes on MP3 recordings
–
About MP3
¶
An MP3 file is audio data compressed by using MPEG1, the
audio layer-3 file-coding scheme.We call files that have the
“.mp3” file extension “MP3 files.”
¶
¶
The player can not read an MP3 file that has a file extension
other than “.mp3.”
Noises may be heard if you play a non-MP3 file that has the
“.mp3” extension.
20
O P ERAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Erasing a track from a Program
Playing MP3 Recordings
1
Press FTS while playback is stopped.
GThe E mark will appear.
1
Insert a disc and close the tray.
GThe MP3 menu appears on the TV screen.
2
3
Press 2to move to the Program list.
Note
– It may take over 30 seconds to read the MP3 files,
depending on the contents of the disc.
Use 3/4to select the track that you wish to erase from
the Program list.
4
Press CLEAR.
GThe track will be erased from the Program.
2
3
Press 3/4to select the MP3 file you want to play.
Press PLAY.
G Playback starts; playback will end when all tracks on the
disc have played.
–
Erasing the com plete Program
1
2
Press FTS while playback is stopped.
MP3
MP3-1
Program
GThe E mark will appear.
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
Use 1/2to select Clear All, then press OK.
GThe complete Program for the disc will be erased.
GThe programs are also cleared when the disc is
removed.
Clear All
MP3-Repeat track/all
Moving to another track
¶
Press Tor Sbriefly during playback to go to the
next track, or press 3/4to select the desired track in the
menu and press PLAY.
– MP3 - Repeat track/all
¶
¶
To repeat the track currently playing, press REPEAT.
GThe Repeat icon appears to the right of the track name.
To repeat all the tracks, press REPEAT a second time.
GThe Repeat icon appears to the right of the directory
name.
To exit Repeat mode, press REPEAT a third time.
GThe Repeat icon disappears.
Pause
Press PAUSE during playback.
To return to playback, press PLAY or PAUSE again.
¶
¶
¶
Stop
MP3
MP3-1
Program
MP3
MP3-1
Program
¶
Press STOP during playback.
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
Program m ed playback with MP3
1
2
Insert the disc and close the tray.
Clear All
Clear All
GThe MP3 menu is displayed on the TV screen.
Press FTS while playback is stopped to enter the Program
Edit mode.
– MP3 - Repeat Program s
GThe E mark will appear to the right of the word Program
on the right side of the MP3 menu.
¶
¶
¶
During Program playback, to repeat the current track, press
REPEAT.
GThe Repeat icon appears to the right of the track name.
To repeat all of the programmed tracks, press REPEAT a
second time.
GThe Repeat icon appears to the right of Program.
To exit Repeat mode, press REPEAT a third time.
GThe Repeat icon disappears.
Note
– Press RETURN or FTS to exit the Program Edit mode;
the E mark will disappear.
3
4
Press 3/4to select a track.
Press OK to place the selected track on the MP3 Program.
G Repeat steps 3 to 4 to place additional tracks in the
program.
Press PLAY to start.
G Playback begins in the order in which you programmed
the tracks.
MP3
Program
MP3
MP3-1
Program
MP3-1
TRACK 2.mp3
TRACK 7.mp3
TRACK 6.mp3
TRACK 9.mp3
TRACK_2
TRACK_7
TRACK_6
TRACK_9
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
TRACK_1
TRACK_2
TRACK_3
TRACK_4
TRACK_5
TRACK_6
TRACK_7
TRACK_8
TRACK_9
5
Clear All
Clear All
G Playback stops after all of the tracks on the Program
have played once.
MP3
MP3-1
Program
E
TRACK 2.mp3
TRACK 7.mp3
TRACK 6.mp3
TRACK 9.mp3
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
Clear All
21
O P ERAT IO N
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
If it appears that the DVD Player is faulty, first consult this checklist. It may be that something has been overlooked. Under no
circumstances should you attempt to repair the system yourself; this will invalidate the warranty.
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).
Sym pt om
Rem edy
No power
–
–
Make sure the power cord is connected properly.
Make sure there is power at the AC outlet by plugging in another
appliance.
No picture
–
–
Check if the TV is on.
Check the video connection.
Distorted picture
–
–
Check the disc for fingerprints. Clean the disc with a soft cloth, wiping from
center to edge.
Sometimes a small amount of picture distortion may appear.This is not a
malfunction.
No sound
–
–
–
Check audio connections.
If you are using a HiFi amplifier, try another sound source.
If you are using a Receiver, select the DVD Player as the sound source at the
receiver.
Distorted sound from HiFi am plifier
No audio at digital output
–
Make sure no audio connections are made to the amplifier’s phono input.
–
–
–
Check the digital connections.
Check the settings menu to make sure the digital output is set correctly.
Check if the audio format of the selected audio language matches your
receiver capabilities.
Disc can not be played.
–
–
–
–
Ensure the disc label is facing up.
Clean the disc.
Check if the disc is defective by trying another disc.
Check if the disc is badly scratched or warped (not flat).
No return to start-up screen when
disc is rem oved
–
–
Reset by switching the DVD Player off, then on again.
Check to see if the Program requires another disc to be loaded.
The DVD Player does not respond to
the rem ote control.
–
–
–
Aim the remote control directly at the DVD Player.
Remove any obstacles between the DVD Player and the remote control.
Inspect or replace the batteries in the remote control.
Buttons do not work.
–
–
In order to completely reset the player, unplug the AC power cord from the
AC outlet.
DVD Player does not respond to som e
operating com m ands during
playback.
Operations may not be permitted by the disc. Refer to the instructions or
menu of the disc. If
appears, the feature is not available on the disc.
DVD Player cannot read
CDs/DVDs.
–
–
Use a commonly available cleaning CD/DVD to clean the lens before
sending the DVD Player for repair.
You can only play finalized discs. If you are using CD-Rom, CD-R or CD-RW
discs, make sure you have finalized the discs. Refer to your CD Recorder
owner’s manual for details.
22
BEFO RE REQ U EST IN G SERVIC E
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PLAYBACK SYSTEM
DVD Video
CO NNECTIO NS
Y Output
Cinch (green)
Video CD and SVCD
Audio CD (CD-R and CD-RW)
DVD+RW
PR Output
PB Output
S-Video Output
Video Output
Audio L+R output
Digital Output
Cinch (red)
Cinch (blue)
Mini DIN, 4 pins
Cinch (yellow)
Cinch (white/red)
1 coaxial, 1 optical
IEC958 for CDDA / LPCM
IEC1937 for MPEG1/2, AC-3, DTS
MP3
O PTICAL READO UT SYSTEM
Lasertype
FDA CFR21
Numerical Aperture
0.60 (DVD)
0.43 (VCD/CD)
650 nm (DVD)
780 nm (VCD/CD)
Wavelength
POW ER SUPPLY
Power Inlet
Power usage
120V, 60Hz
16 Watt
DVD DISC FO RMAT
Medium
Diameter
Power usage standby
less than 3 Watt
Optical Disc
12cm (8cm)
One layer
Dual layer
Two side
CABINET
Dimensions (w x h x d)
Playing time (12cm)
2.15 h*
4 h*
4.30 h*
16.93 x 3.45 x 9.72 inches
430 x 88 x 247 mm
Approx. 6.6 pounds
Approx. 3.0 Kg
Weight
Single layer
Two side
8 h*
Dual layer
GENERAL FUNCTIO NALITY
Stop / Play / Pause
VIDEO FO RMAT
DA Converter
Fast Forward / Backward
Time Search (DVD)
10 bits
Signal handling
Digital Compression
Components
MPEG2 for DVD,
MPEG1 forVCD
Step Forward/Backward
Slow Motion
Title / Chapter /Track Select
Skip Next / Previous
TV Standard
Number of lines
Playback
NTSC
525/60Hz
Multistandard(PAL/NTSC)
Repeat (Chapter /Title) or (Track / All)
A-B Repeat
Random (Shuffle)
Enhanced ease of use graphical interface
Zoom (6 steps)
DVD
Horizontal Resolution
Vertical Resolution
720 pixels
480 lines
3D Surround Sound
DVD FUNCTIO NALITY
VCD
Multi-angle Selection
Horizontal Resolution
Vertical Resolution
352 pixels
240 lines
Audio Selection (1 out of maximum eight languages)
Subtitles Selection (1 out of maximum 32 languages)
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Panscan)
Parental Control
VIDEO PERFO RMANCE
Component video output
Y: 1Vpp into 75 ohm
PR/CR PB/CB: 0.7Vpp into 75 ohm
1Vpp into 75 ohm
Disc Menu support (Title Menu and Root Menu)
Resume (one disc) after stop / standby
Marker & Search with Favorite Scene
Video output
S-Video output
Y: 1Vpp into 75 ohm
C: 0.286Vpp into 75 ohm
VIDEO CD FUNCTIO NALITY
Playback Control forVCD 2.0 discs
Resume (one disc) after stop / standby
ProgrammingTracks (PBC Off)
AUDIO FO RMAT
Digital
MPEG/AC-3/DTS/
PCM
Compressed Digital,
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
AUDIO CD FUNCTIO NALITY
Time Display (Track)
Analog Sound Stereo
Dolby Surround downmix from Dolby Digital multi-channel sound
3D Sound on two speakers
Full audio functionality with remote control
Programming with Favorite Track Selection
AUDIO PERFO RMANCE
DA Converter
DVD
MP3 FUNCTIO NALITY
Time Display (Track)
Programming with Favorite Track Selection
24 bits
fs 96 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
fs 44.1 kHz
fs 48 kHz
4 Hz - 44 kHz
4 Hz - 22 kHz
4 Hz - 20 kHz
4 Hz - 20 kHz
4 Hz - 20 kHz
4 Hz - 22 kHz
100 dB
Video CD
CD
SVCD
*
typical playing time for movie with two spoken languages and three subtitle
languages.
Signal-Noise (1kHz)
Specifications subject to change without prior notice.
Dynamic Range (1kHz)
Crosstalk (1kHz)
95 dB
90 dB
Distortion and Noise (1kHz)
0.008%
23
SP EC IFIC AT IO N S
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Digital Video Disc Player
90 days Free Exchange / 91 days–OneYear Reduced-Cost Exchange
WHO IS COVERED?
showing proof of date of purchase.Attach it to the
owner’s manual and keep both nearby.Also keep the
original box and packing material in case you need to
return your product.
You must have proof of the date of purchase to
exchange your product.A sales receipt or other docu-
ment showing the date that you purchased the product
is considered such proof.
BEFORE EXCHANGING THE PRODUCT...
Please check your owner’s manual before exchanging
the product.Adjustments of the controls discussed
there may save you time and money.
WHAT IS COVERED?
Warranty coverage begins the day you buy your prod-
uct. For 90 days thereafter, you may exchange the defec-
tive product for a new or renewed product at the store
from which it was purchased or through Philips. Either
exchange is made at no cost to you.
LIMITATION OF LIABILITY AND REMEDY...
Philips is not liable under any circumstances for any
direct, indirect, special, incidental, or consequential dam-
ages, howsoever incurred, even if notified of the possibil-
ity of such damages.
To the extent permitted by local law, the remedies pro-
vided in this warranty statement are your sole and
exclusive remedy.
From 91 days to one year from the date of purchase, you
will pay a preset exchange fee to obtain a new or
renewed product. Follow the exchange procedures on
the next page.This exchange opportunity ends one year
after the date of purchase.The replacement product is
covered only for the warranty period of the original
product.When the warranty on the original product
expires, the warranty on all replaced products also
expires.
This limited warranty gives you specific legal rights, and
you may also have other rights which vary from
state/province to state/province.
WHAT IS EXCLUDED?
TO EXCHANGE YOUR PRODUCT IN THE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Follow the instructions stated previously in the “What is
Covered” section, or refer to the exchange instructions
on the next page.
In the U.S.A., Puerto Rico, and U.S.Virgin Islands, all
implied warranties, including the implied warranties of
non-infringement, merchantability and fitness for a par-
Your warranty does not cover:
•
•
shipping charges to return defective product.
labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
•
•
product repair and/or part replacement because of
improper installation, abuse, neglect, misuse, accident, ticular purpose, are specifically disclaimed, and to the
unauthorized repair or other cause not within the
control of Philips Consumer Electronics.
extent inconsistent with law of the locality of the user,
limited in duration to the duration of this express war-
ranty. Because some states do not allow limitations on
how long an implied warranty may last, this limitation
a product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed, manufactured, may not apply to you.
approved and/or authorized, or repair of products
damaged by these modifications.
TO EXCHANGE A PRODUCT IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
In Canada, this warranty is given in lieu of all other war-
ranties.There are no other warranties, express or
implied, including any implied warranties of mer-
chantability or fitness for a particular purpose.
•
•
incidental or consequential damages resulting from
the product. (Some states do not allow the exclu-
sion of incidental or consequential damages, so the
above exclusion may not apply to you.This includes,
but is not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
a product that is used for commercial or institution-
al purposes (including but not limited to rental pur-
poses).
TO GET OUT-OF-WARRANTY EXCHANGE...
In the U.S.A., Puerto Rico, or U.S.Virgin Islands, contact
Philips Service Solutions Group at 1-800-531-0039 to
obtain the cost of out-of-warranty exchange.
WHERE IS EXCHANGE AVAILABLE?
Warranty exchange is available in all countries where
the product is officially distributed by Philips Consumer
Electronics. In countries where Philips Consumer
Electronics does not distribute the product, the local
REMEMBER...
Please record below the model and serial numbers
Philips service organization will attempt to exchange the found on the product.Also, please fill out and mail your
product, although there may be a delay if the appropri-
ate product is not readily available.
warranty registration card promptly. It will be easier for
us to notify you if necessary.
MODEL #__________________________________
SERIAL #__________________________________
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document
Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, (903) 242-4800
EL6478E001 /2-01
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (cont’d)
EXCHANGE INSTRUCTIONS
If your product is defective, you m ay be able to exchange it at the store from which it was purchased.
Most stores display a Return Policy. If not, ask the manager or sales associate how many days you have to
exchange a product with them.After the store’s return period has expired, or if the store does not have an
exchange program, you may exchange the product with Philips if you have your original sales receipt.
To exchange your product with Philips (per the warranty conditions stated previously), rem em ber :
•
•
If you exchange the product within 90 days of the original purchase, there is no cost to you.
If you exchange the product more than 90 days after but less than one year after the day of original purchase,
contact Philips Service Solutions Group (PSSG) at 1-800-531-0039 to determine the preset cost for exchange.
After 12 months from the day of original purchase, contact PSSG at 1-800-531-0039 for information regarding
out-of-warranty exchange.
•
•
If you do not have your original sales receipt, or if you have any questions, call PSSG at 1-800-531-0039.
To obtain a replacem ent product from Philips:
1. Contact PSSG at 1-800-531-0039 to determine the cost for exchange.
2. Complete the Exchange Form below.
3. Pack the product and its accessories in the original box or a suitable alternative.You will receive replacement
accessories with your replacement product. For packing details, call 1-800-531-0039.
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into
an envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope “Return
Documents Enclosed.” Place this envelope in the box with the product.
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight
prepaid, to:
Philips Recovery Center
Rojas 6
12420 Mercantile Avenue
El Paso,TX 79928
ATTENTION: DVD PLAYER EXCHANGE
A replacement will be sent to you via UPS within 48 business hours of Philips’ receipt of the product.
EXCHANGE FORM
Your Address (street address to which replacem ent should be delivered, no P.O. boxes allowed):
Name:
Street Address:
City:
Phone (day):
Apt. #:
State/Province:
Phone (night):
Zip Code/Postal Code:
Exchange Fee:
+ Sales Tax:
= Total:
Method of Paym ent: (Check one. Please, no cash or CODs.)
_____ Check/Money order
Check/Money order No.
Account number
Expiration date
__________
__________
__________
__________
_____ American Express
_____ Visa
_____ Novus/Discover
_____ Mastercard
___________________________
___________________________
___________________________
___________________________
Signature: _____________________________________________________________
Detailed reason for return, use additional paper if necessary: _____________________________________________
_______________________________________________________________________________________________
Model Number
Serial Number
Rem em ber, the return box should include the following:
•
•
The product,
•
Accessories supplied with the product, and
Com pleted Exchange Form and sales receipt, • Paym ent, if applicable.
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS CO NSUMER ELECTRO NICS CO MPANY
A Division of Philips Electronics North America Corporation, Knoxville,Tennessee 37914-1810, USA
DVD702
CLASS 1
LASER PRODUCT
IB8293E001
The products and services described herein are not
necessarily available in all countries.
Due to continuous product improvements, this
document is subject to change without notice.
Printed in China
SL-0109/17-1
P/N: 3834RS0018W
Download from Www.Somanuals.com. All Manuals Search And Download.
|