Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome
DCM263
EN User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
1 Important
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
•
•
•
•
Install all batteries correctly, + and -
as marked on the unit.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Remove batteries when the unit is
not used for a long time.
The batteries shall not be exposed
to excessive heat such as sunshine,
fire or the like.
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
j Only use attachments/accessories
specified by the manufacturer.
q This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
r Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
must only be mounted on an appropriate wall
bracket and on a wall that can safely hold the
weight of the unit. Improper wall mounting
can result in severe injury or damage. Do not
attempt to wall mount the unit yourself.
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Hearing safety
Listen at a moderate volume.
Know these safety symbols
•
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation mark’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be
placed on this apparatus.
•
To establish a safe volume level:
•
•
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
•
Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match wide
blade to wide slot.)
•
Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Warning
•
•
•
•
Listen at reasonable volumes for
reasonable periods of time.
• Never remove the casing of this unit.
• Never lubricate any part of this unit.
• Place this unit on a flat, hard and stable
surface.
Be careful not to adjust the volume as
your hearing adapts.
• Never place this unit on other electrical
equipment.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
• Only use this unit indoors. Keep this unit away
from water, moisture and liquid-filled objects.
• Keep this unit away from direct sunlight, naked
flames or heat.
• Never look into the laser beam inside the unit.
Wall mounting of the unit should only be
performed by qualified personnel. The unit
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol
are trademarks of Dolby Laboratories.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX, Inc. This is
an official DivX Certified device that plays
information and software tools to convert
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered in
order to play DivX Video-on-Demand (VOD)
content. To generate the registration code,
locate the DivX VOD section in the device
setup menu. Go to vod.divx.com with this
code to complete the registration process and
learn more about DivX VOD.
DivX® and DivX Ultra® are registered
trademarks of DivX, Inc., and are used under
license.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
This apparatus includes these labels:
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Class II equipment symbol
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
This symbol indicates that the apparatus has a
double insulation system.
Refer to the type plate at the back of the main
unit and the bottom of the subwoofer for
identification and supply ratings.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
You can play DVD discs with the following
region codes:
2 Your DVD
MicroTheater
DVD region code
Countries
Latin America
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
What’s in the box
Check and identify the contents of your
package:
Introduction
•
•
•
•
•
•
•
•
•
Main unit
With this unit, you can:
Subwoofer
Composite AV cable
MP3 LINK cable
Flat pin adaptor
Wall mounting screws and dowels
User Manual
Quick Start Guide
Wall mounting instruction sheet
•
watch video from DVD/VCD/SVCD/
DVD+RW or USB
•
•
enjoy audio from discs or USB
view pictures from discs or USB
You can enrich sound output with these sound
effects:
•
•
•
•
Digital Sound Control (DSC)
Dynamic Bass Boost (DBB)
Bass/treble enhancement
Dolby Virtual Speakers (Dolby VS)
The unit supports these media/disc formats:
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
Front view
a
b
f
MP3 LINK
DVD/MP3-WMA-CD COMPATIBLE
e
d
c
a Display panel
•
Display current status.
b Disc compartment
c
•
USB socket.
d MP3 LINK
•
Jack for an external audio device.
e Remote control sensor
f
•
Headphone socket.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Back view
g
h
i
j
t
SOURCE
VOLUME
VOLUME
s
r
k
l
m
n
COMPONENT OUT
Yb/Cb
q
p
o
SUB
WOOFER
OUT
AV-
OUT
DC
IN
FM
ANT
HDMI
Y
Yr/Cr
g
q DC IN
Power supply socket
•
Start or pause play.
•
h
/
r VOLUME -/+
•
•
Press and hold for fast backward or
forward search.
Skips to the previous or next title,
chapter or track.
•
•
Adjust volume.
s
t
Press to open or close the disc
compartment.
i
•
Turn on the apparatus; switch to
standby mode.
•
•
Stop play.
Erase a program.
j SOURCE
•
Select a source.
k Sockets for wall mounting
l AV OUT
•
Socket for audio/video output.
m HDMI
•
HDMI output socket.
n COMPONENT OUT
•
Socket for component video output.
o SUBWOOFER OUT
•
Subwoofer out socket.
p FM ANT
•
FM antenna.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the subwoofer
Overview of the remote
control
Bottom view
DISC
USB
A-B
TUNER
MP LINK
3
MODE
DIM
SLEEP
TIMER
DISPLAY
CLOCK
SYSTEM MENU
DISC MENU
a
TO MAIN SET
AC~
OK
DBB
b
SURROUND
a Cable to the main set.
VOL
b Power cable.
MUTE
1
4
2
5
8
0
3
6
7
9
ANGLE
PROG
GOTO
SUBTITLE
a
•
Turn on the apparatus; switch to
standby mode.
b Source selection keys
Select a source.
•
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
c DISPLAY/CLOCK
m AUDIO
•
Display play information on a
•
For VCD, select stereo, mono-left or
connected TV.
Set or display clock.
mono-right channel.
For DVD/DivX video, select an audio
language.
•
•
d DISC MENU
•
For video discs: access or exit the
n SUBTITLE
disc menu.
•
Select a subtitle language.
•
For video discs with playback
control(PBC): turn on/off PBC.
o GOTO
•
During disc play, specify a position to
start play.
e SLEEP/TIMER
•
•
Set the sleep timer.
Set the alarm timer.
p ANGLE/PROG
•
•
•
•
Select a DVD camera angle.
f
g
/SLOW
Program tracks.
•
•
•
•
For menus: navigate up
Program titles/chapters for DVD play.
Program radio stations.
Move an enlarged picture up
Rotate or invert pictures.
Select a slow play mode.
q Numeric keypad
•
Select a title/chapter/track directly.
/
r
s
•
•
•
•
•
•
Search within a track or disc.
For menus, navigate left/right.
Tune to a radio station.
Move an enlarged picture left/right.
Adjust time.
Toggle between 24H and 12H during
clock setting.
•
•
Stop play.
Erase a program.
/
•
•
Skip to the previous/next track.
Skip to the previous/next title or
chapter.
•
Select a preset radio station.
h
/ZOOM
•
•
•
•
For menus: navigate down.
t
Move an enlarged picture down.
Rotate or invert pictures.
Zoom in or out a picture/video
image on the TV screen.
•
Start or pause play.
u SURROUND
•
Enable/disable Dolby Virtual
Speakers (Dolby VS) sound effect.
i LOUDNESS/DBB
v OK
•
Turn on or off automatic loudness
•
Confirm a selection.
adjustment.
•
Turn on or off dynamic bass
enhancement.
w A-B
•
Repeat a specific section within a
track/disc.
j VOL +/-
•
Adjust volume.
x SYSTEM MENU
Access or exit the system setup
menu.
•
k MUTE
•
Mute or restore volume.
y MODE/DIM
l DSC
•
•
•
Select repeat play modes.
•
Select a preset sound setting.
Select shuffle play modes.
Select a brightness level for the
display screen.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
ConnectTV
3 Connect
Connect video cables
With this connection, you can watch video
from the unit on the TV screen.
You can select the best video connection that
your TV supports.
Place the unit
•
Option 1: Connect through HDMI (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: connect through component
video (for a standard TV or Progressive
Scan TV).
•
•
Option 3: connect through composite
video (CVBS) (for a standard TV).
Option 1: Connect through HDMI
1 Place the unit near to the TV.
COMPONENT OUT
SUB
OOFER
OUT
2 Place the subwoofer at the corner of the
room or at least one meter away from
the TV.
AV-
OUT
W
DC
IN
FM
ANT
HDMI
Y
Yb/Cb
Yr/Cr
3 Place the main unit on a hard, flat and
stable surface.
Tip
TV
HDMI IN
• You can also mount the unit on the wall with
the supplied screws.
Connect HDMI (High Definition Multimedia
Interface), DVI (Digital Visual Interface), or
HDCP (High-bandwidth Digital Contents
Protection)-compliant TVs through HDMI
for the best picture quality. This connection
transmits both video and audio signals.
Note
• To avoid magnetic interference or unwanted
noise, never place this apparatus and speakers
too close to any radiation devices.
• Never place this unit in an enclosed cabinet.
• Install this unit near the AC outlet where the
AC power plug can be easily reached.
Through this connection, you can watch DVDs
that contain HD (High-Definition) content.
Note
Before you connect
• Some TVs do not support HDMI audio
transmission.
• This connection provides the best video
quality.
1 Place a soft cloth on a hard, flat, stable
surface.
2 With its front panel face-down, place the
1 Connect an HDMI cable (not supplied)
unit onto the cloth.
to:
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
the HDMI socket on this unit.
1 Connect the supplied composite video
the HDMI input socket on the TV.
cable to:
•
•
the AV OUT socket on this unit.
the video input socket on the TV.
Note
• If your TV has only a DVI connection, connect
through a HDMI/DVI adaptor. An extra
audio connection is needed to complete this
connection.
Connect Subwoofer
1 Insert the grey audio plug from the
subwoofer into the SUBWOOFER OUT
socket on the main unit.
Option 2: Connect through
component video
Connect a progressive scan TV through
component video for higher quality video.
COMPONENT OUT
SUB
OOFER
OUT
AV-
OUT
W
DC
IN
FM
ANT
HDMI
Y
Yb/Cb
Yr/Cr
SUB
WOOFER
OUT
COMPONENT OUT
SUB
OOFER
OUT
AV-
OUT
W
DC
IN
FM
ANT
HDMI
Y
Yb/Cb
Yr/Cr
TO MAIN SET
AC~
COMPONENT OUT
Yb/Cb Yr/Cr
Y
Y
Pb Pr
TV
2 Connect another grey plug (DC input
plug) from the subwoofer to the DC IN
socket on the main unit.
1 Connect component video cable (red/
blue/green - not supplied) to:
•
the COMPONENT OUT(Y Pb/Cb
Pr/Cr) sockets on this unit.
the component input sockets on the
TV.
COMPONENT OUT
SUB
OOFER
OUT
AV-
OUT
W
DC
IN
FM
ANT
HDMI
Y
Yb/Cb
Yr/Cr
•
DC
IN
TO MAIN SET
AC~
Option 3: Connect through
composite video
COMPONENT OUT
SUB
OOFER
OUT
AV-
OUT
W
DC
IN
FM
ANT
HDMI
Y
Yb/Cb
Yr/Cr
-
AV
OUT
AUDIO IN
TV
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect power
Caution
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Risk of electric shock! When you unplug the
AC power, always pull the plug from the
socket. Never pull the cord.
• Before you connect the AC power, ensure you
have completed all other connections.
1 Connect the power plug (black) on the
subwoofer to the wall outlet.
TO MAIN SET
AC~
Tip
• The AC voltage, frequency and current
consumption information is located at rear of
the main unit.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Get started
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Set clock
1 In the standby mode, press and hold
CLOCK on the remote control to
activate the clock setting mode.
» 24H begin to blink.
Prepare the remote control
Caution
2 Press
/
repeatedly to toggle
between 12H and 24H.
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
3 Press CLOCK to confirm.
» The hour digits displays and begin to
blink.
For first-time use:
4 Press
/
to set the hour and press
1 Remove the protective tab to activate the
CLOCK to confirm.
» The minute digits displays and begin
to blink.
remote control battery.
2 Open the battery compartment.
3 Insert one lithium CR2025 battery with
5 Press
/
to set the minute and press
correct polarity (+/-) as indicated.
CLOCK to confirm.
4 Close the battery compartment.
Note
Turn on
• Before you press any function button on the
remote control, first select the correct source
with the remote control instead of the main
unit.
1 Press
.
» The unit switches to the last selected
source.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
[NTSC] - For TV with NTSC color
Switch to standby mode
system.
1 Press again.
5 To exit the menu, press SYSTEM MENU.
» The clock (if set) appears on the
display panel.
Note
• When the HDMI cable is connected, the [TV
System] option is unavailable.
Find the correct viewing
channel
1 Press to turn on the unit.
Change system menu
language
2 Press DISC to switch to disc mode.
3 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
1 Press SYSTEM MENU.
2 Select [General Setup].
•
Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
Press the source button repeatedly
on the remote control of your TV.
3 Select [OSD Language] and then press
.
4 Select a setting and then press OK.
5 To exit the menu, press SYSTEM MENU.
•
Tip
Turn on Progressive Scan
• The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinaryTV system).With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
•
The TV supports progressive scan
signals.
You have connected this unit with
the TV through component video.
Select the correctTV system
•
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting forTVs in your country.
1 Turn on the TV.
2 Ensure that the TV progressive scan
mode is deactivated (see the TV user
manual).
1 Press SYSTEM MENU.
2 Select [Video Setup].
3 Select [TV System] and then press
.
3 Switch the TV to the correct viewing
4 Select a setting and then press OK.
channel for this unit.
•
•
[PAL] - For TV with PAL color
4 Press DISC.
system.
5 Press SYSTEM MENU.
6 Press to select [Video Setup] in the
[Multi] - For TV that is compatible
with both PAL and NTSC.
menu, then press
.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Select [Progressive], then press
.
8 Select [On], then press OK.
» A warning message is displayed.
9 To proceed, select [OK] and press OK.
» The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait
for 15 seconds for auto recovery or turn off
progressive scan manually.
10 Turn on the progressive scan mode on
the TV.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
For VCD with PlayBack Control (PBC)
feature (version 2.0 only):
With the PBC feature, you can play VCD
interactively according to the menu screen.
5 Play
1 During play, press DISC MENU to
Note
enable/disable PBC.
• With some disc/file types, play may differ.
» When PBC is enabled, the menu
screen is displayed.
» When PBC is disabled, normal play is
resumed.
Play discs
Select an audio language
You can select an audio language on DVDs,
DiVx video or VCDs.
1 During disc play, press AUDIO.
» The language options appear. If the
selected audio channels is unavailable,
the default disc audio channel is used.
Caution
• Never look at the laser beam inside the unit.
• Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
• Never put any objects other than discs into
the disc compartment.
1 Press DISC to select the DISC source.
Note
2 Insert a disc into the disc compartment
and press .
• For some DVDs, the language can only be
changed from the disc menu. Press DISC
MENU to access the menu.
•
Ensure that the label faces outwards.
3 Play starts automatically.
•
•
•
To stop play, press
.
To pause or resume play, press
To skip to the previous/next title/
chapter/track, press
.
Select a subtitle language
/
.
You can select a subtitle language on DVDs or
DivX® Ultra discs.
If play does not start automatically:
•
Select a title/chapter/track and then press
•
During play, press SUBTITLE.
OK.
Tip
Tip
• For some DVDs, the language can only be
changed from the disc menu. Press DISC
MENU to access the menu.
• To play a locked DVD, enter the 6-digit
parental control password.
Use the disc menu
When you load a DVD/(S)VCD disc, a menu
may be displayed on the TV screen.
Play from USB
Note
To access or exit the menu manually:
1 Press DISC MENU.
• Ensure that the USB device contains playable
music, pictures or video.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Insert the USB plug into the
socket.
Play MP3/WMA/picture files
2 Press USB to select the USB source.
You can play MP3/WMA/picture files copied
onto a CD-R/RW, recordable DVD or USB
device.
3 Press DISC MENU until the folder is
displayed.
4 Press
OK to confirm.
5 Press to select a file from the folder.
to start play.
To stop play, press
/
to select a folder, then press
1 Insert a disc or connect a USB device.
2 Select a source:
/
•
•
For discs, press DISC.
For USB devices, press USB.
6 Press
•
•
•
.
3 Press DISC MENU until the folder is
To pause or resume play, press
To skip to the previous/next file,
press
.
displayed.
4 Press
/
to select a folder, then press
/
.
OK to confirm.
5 Press
/
to select a file from the folder.
6 Press OK /
to start play.
Play DivX video
•
•
•
To stop play, press .
To pause or resume play, press
To skip to the previous/next file,
.
You can play DivX files copied onto a CD-R/
RW, recordable DVD, USB device.
press
/
.
1 Insert a disc or connect a USB device.
2 Select a source:
•
•
For discs, press DISC.
For USB devices, press USB
repeatedly.
Play control
Select repeat/shuffle play options
1 During play, press MODE/DIM repeatedly
to select a repeat option or the shuffle
play mode.
3 Select a file to play and press OK.
•
•
•
To stop play, press
.
To pause or resume play, press
.
To change a subtitle language, press
SUBTITLE.
•
To resume normal play, press
MODE/DIM repeatedly until no
option is displayed.
Note
• You can only play DivX videos rented or
purchased through the DivX registration code
of this unit.
Repeat A-B (DVD/VCD/CD/MP3/
WMA)
• Subtitle files with the following filename
extensions (.srt, .smi, .sub, .ssa, .ass) are
supported but do not appear on the file
navigation menu.
1 During music or video play, press A-B at
the start point.
• The subtitle filename has to be the same as
the file name of the video.
2 Press A-B at the end point.
» The selected section starts to play
repeatedly.
•
To cancel repeat play, press A-B
again.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Play options
Note
• The section A and B can be set only within the
same track/title.
Display play information
1 During play, press DISPLAY/CLOCK
repeatedly to show different play
information or clock.
Search forward/backward
1 During play, press
/
repeatedly to
Program
select a search speed.
•
To resume play at normal speed,
press
.
For DVDs/VCDs/CDs:
1 In stop mode, press ANGLE/PROG to
Search by time or chapter/track
number
1 During video/audio play, press GOTO
repeatedly to display time field or track
field.
access the program menu.
2 Use the number keys to enter the tracks/
chapters into the program list.
3 Repeat step 2 until the program is
complete.
•
For the time field, enter the play
position in hours, minutes and
seconds.
4 Select [Start].
» The programmed tracks/chapters start
to play.
•
•
For the track field, enter the track/
chapter number.
Play starts automatically at your
selected point.
Note
• You cannot program picture files/discs, WMA,
DixX or MP3 discs.
Note
• The displayed fields may vary from source
type.
Zoom in/out image
1 During video/picture play, press and
hold /ZOOM to select zoom scale.
Resume video play from last stopped
point
•
When the image is zoomed in, you
can press
/
/ / to pan through
the image.
Note
Slow-motion play
1 During video play, press /SLOW
repeatedly to select a slow play mode.
» The sound is muted.
• This feature is only available for DVD/VCD/
CD play.
1 In stop mode and when the disc has not
been removed, press
.
» To resume play at normal speed, press
.
To cancel resume mode and stop play
completely:
1 In stop mode, press
.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a camera angle
Note
• This feature is only available for DVDs
recorded with multiple camera angles.
1 During play, press ANGLE/PROG
repeatedly to select a camera angle.
Picture view options
Preview pictures
1 During play, press
.
» The thumbnails of 12 pictures are
displayed.
2 Press
/
to turn to the next/previous
page (if available)
3 Navigate through the current page with
buttons
/
, / and select a picture.
4 Press OK to start slide show from the
selected picture to the last one in this
folder.
Select a slide show play mode
1 During play, press ANGLE/PROG
repeatedly to select a slide-show play
mode.
Rotate picture
1 During play,
•
•
•
•
Press
Press
to rotate counter-clockwise.
to rotate clockwise.
Press to flip up/down.
Press to flip left/right.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
6 Adjust settings
• You can set or change the password, go to
[Preferences] >[Password].
Note
[OSD Language]
Select an on-screen menu language.
• If the setup option is grayed out, it means the
setting cannot be changed at the current state.
[DivX(R) VOD Code]
Display the DivX® registration code.
General setup
Tip
• Use this product’s DivX registration code
when you rent or purchase video from www.
divx.com/vod. The DivX videos rented or
purchased through the DivX® VOD (Video
On Demand) service can be played only on
the device to which it is registered.
1 Press SYSTEM MENU.
» [General Setup]menu is displayed.
2 Press
.
3 Select an option, then press OK.
4 Select a setting, then press OK.
•
•
To return to the previous menu,
press
.
Audio setup
To exit the menu, press SYSTEM
MENU.
1 Press SYSTEM MENU.
» [General Setup] menu is displayed.
2 Press to select [Audio Setup], then
press
.
3 Select an option, then press OK.
4 Select a setting, then press OK.
•
•
To return to the previous menu,
press
.
To exit the menu, press SYSTEM
MENU.
[Disc Lock]
Set play restriction for a disc which is loaded
in the disc compartment (maximum 20 discs
can be locked).
•
•
[On] - Restrict access to the current
disc. The next time you want to play this
disc or unlock it, you need to enter the
password.
[Off] - Play all discs.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[Analogue Output]
•
[Off] – Enjoy surround sound with a full
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
dynamic range.
Note
•
[LT/RT] - For surround sound output
through two speakers.
• Applicable only to Dolby Digital encoded
DVD.
•
•
[Stereo] - For stereo output.
[
VS Wide] - Dolby Virtual Speaker
option for small space.
VS Reference] - Dolby Virtual Speaker
option for spacious room.
•
[
Video setup
1 Press SYSTEM MENU.
[HDMI Audio]
» [General Setup] menu is displayed.
Select the HDMI audio setting when you
connect this product and the TV with an
HDMI cable.
2 Press to select [Video Setup], then
press
.
•
[On] - Allow audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
[Off] - Disable audio output from the
TV. The sound is only output through the
speaker system.
3 Select an option, then press OK.
4 Select a setting, then press OK.
•
•
To return to the previous menu,
press
.
To exit the menu, pressSYSTEM
MENU.
•
[Audio Sync]
Set the delay time for audio output when you
play a video disc.
1 Press OK.
2 Press
/
to set the delay time.
3 Press OK to confirm and exit.
[Sound Mode]
Selects a preset sound effect to enhance the
audio output.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[3D] – Set the 3D processing output
mode.
•
[Movie Mode] – Select a sound effect for
movies.
•
•
[PAL] - For PAL-system TV.
[Multi] - For TV that is compatible with
both PAL and NTSC.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[NTSC] - For NTSC-system TV.
•
[On] – Enjoy quiet viewing at night.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
[TV Display]
Select a display format:
Note
• This product supports the resolution display of
720p and above.
[HDMI Setup]
When you connect this apparatus and TV
with HDMI cable, select the best HDMI video
setting that your TV supports.
•
•
[4:3 Pan Scan] - For 4:3 screen TV: full-
height display with the trimmed sides.
[4:3 Letter Box] - For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9] - For wide-screen TV: display ratio
16:9.
•
[Wide Screen Format] – Define the wide
screen format for disc play.
•
Note
[Progressive]
• This setting is only available if you have set the
[TV Display] setting to [16:9 Wide Screen].
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
•
[HDMI Video] – Select the HDMI video
output resolution that is compatible with
your TV display capability.
•
•
[On] - Turn on progressive scan.
[Off] - Turn off progressive scan mode.
Note
Note
• For more detailed description, see “Get
started” > “Turn on progressive scan”.
• If the setting is not compatible with your TV,
a blank screen appears. Wait for 15 seconds
for auto recover or switch to its default mode
as follows: 1) Press . 2) Press . 3) Press
ZOOM.
[Picture Setting]
Select a predefined set of picture color
settings or customize the personal setting.
•
[EasyLink] -- Set one-touch play and
one-touch standby between EasyLink-
compliant devices.
•
•
•
•
[Standard] - Original color setting.
[Bright] - Vibrant color setting.
[Soft] - Warm color setting.
[Personal] - Customize the color setting.
Set the level of brightness, contrast, tint
and color saturation, then press OK.
Note
• Compliant devices must be connected to the
unit via HDMI.
[HD JPEG]
Enjoy untouched and uncompressed JPEG
pictures at its original resolution when you
you connect this product and the TV with an
HDMI cable.
Preferences
•
•
[On] - Display high definition picture.
Note
[Off] - Display standard picture.
• Stop disc play before you can access to
[Preferences].
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• Rated DVDs above the level you set in
[Parental control] require a password to be
played.
• The ratings are country-dependent. To allow
all discs to play, select ‘8’.
• Some discs have ratings printed on them but
are not recorded with ratings. This function
has no effect on such discs.
[PBC]
1 Press SYSTEM MENU.
Turn on or off the content menu of VCDs/
SVCDs with PBC (playback control) feature.
» [General Setup] menu is displayed.
2 Press to select [Preferences], then
•
[On] - Display the index menu when you
load a disc for play.
[Off] - Skip the menu and start play from
the first title.
press
.
3 Select an option, then press OK.
•
4 Select a setting, then press OK.
•
•
To return to the previous menu,
[MP3/JPEG Nav]
Select to display the folders or display all the
files.
press
.
To exit the menu, press SYSTEM
MENU.
•
•
[View Files] - Display all the files.
[View Folders] - Display the folders of
MP3/WMA files.
[Audio]
Select an audio language for disc play.
[Password]
Set or change the password for locked discs
and play restricted DVDs.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
1. Press the Numeric buttons to enter
default password ‘123456’ or the last set
password at [Old Password] field.
2. Enter the new password at [New
Password] field.
Select a disc menu language.
Note
• If the language you have set is not available on
the disc, the disc uses its own default language.
3. Enter the new password again at [Confirm
PWD] field.
4. Press OK to exit the menu.
[Parental control]
Restrict access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
Note
• If you forget the password, enter ‘123456’
before you set a new password.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
[Divx Subtitle]
Select the language of the DivX.
Tip
• Ensure that the subtitle file has the exact same
file name as the movie file. If for example the
file name of the movie is ‘Movie.avi’, then
you need to name the text file ‘Movie.sub’ or
‘Movie.srt’.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental
control] and [Password] settings.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Toexit Plug and Play installation mode
7 Tune to FM
radio stations
1 press source keys or on the remote
control.
» The system switches to the designated
source mode or standby mode.
Note
Program radio stations
automatically
• Ensure that you have connected and fully
extended the supplied FM antenna.
Note
Plug & Play
• You can program a maximum of 20 preset
radio stations.
When you connect the unit to the power
supply for the first time, or no radio station
is stored in this unit, Plug and Play mode is
activated to store all available radio stations
automatically.
1 Connect the unit to the power supply.
» [AUTO INSTALL - PRESS PLAY,
STOP CANCEL] (auto install - press
the PLAY button; to cancel, press
) displays.
1 Press
/
to select a preset number to
start programing.
2 Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed briefly.
» All available stations are programmed
in the order of waveband reception
strength.
2 Press
on the main unit to start
» The last programed radio station is
installation.
broadcast automatically.
» [AUTO] (auto) displays.
» [PROG] (program) flashes.
» The unit automatically store radio
Program radio stations
manually
stations with sufficient signal strength.
3 When all the available radio stations are
stored, the first preset radio station is
broadcast automatically.
Note
• You can program a maximum of 20 preset
radio stations.
Tip
• If no key is pressed during Plug and Play
mode, the system goes to Standby mode
after timeout of 5 times. To go to installation
1 Tune to a radio station.
2 Press ANGLE/PROG to activate
again, press and hold
Standby mode.
for 3 seconds under
programming.
3 Press
/
to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Repeat the above steps to program other
stations.
Note
• To overwrite a programmed station, store
another station in its place.
Tune to a preset radio station
1 Press / to select a preset number
that you want.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
one
time
two
times
Display
DBB
Result
Bass enhancement
turned on
8 Adjust volume
level and sound
effect
LOUDNESS Loudness control
turned on, bass
enhancement turned
off.
three
times
OFF
Both loudness
control and bass
enhancement turned
off.
Adjust volume level
1 During play, press VOL +/- to increase/
decrease the volume level.
Select surround sound effect
Select a sound effect
Dolby VS (Dolby Virtual Speaker) technology
creates a highly compelling 5.1-channel
listening experience from as few as two
speakers. It is an ideal entertainment solution
for locations where space for multiple speaker
setup is limited.
Note
• You cannot use different sound effects at the
same time.
1 During play, press SURROUND.
» The surround sound effect options
display:
Select a preset sound effect
1 During play, press DSC repeatedly to
» [WIDE] (Dolby virtual speaker
wide): you will actually sense that the
speakers are farther apart than they
really are; it is great for small spaces.
» [REFERENCE] (Dolby virtual speaker
reference): the front sound image
width is the same as the distance
between the two speakers, so it is
perfect if you have a more spacious
environment.
select:
•
•
•
•
•
[POP] (pop)
[JAZZ] (jazz)
[ROCK] (rock)
[CLASSIC] (classic)
[FLAT] (flat)
Enhance bass and automatic control
loudness
» [OFF] (off)
Automatic loudness control increases the
treble and bass effect at low volume levels
(the higher the volume, the lower the treble
and bass levels).
Note
• When the DVD disc playback, the Dolby
VS turns on automatically. When the CD/
MP3/WMA playback, the Dolby VS turns off
automatically.
1 During play, press LOUDNESS/DBB
repeatedly to toggle between the bass
enhancement and loudness control.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute sound
1 During play, press MUTE to mute/unmute
sound.
Listen through headphone
1 Plug a headphone into the socket on
the unit.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the sleep timer
9 Other features
1 When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
Adjust brightness of display
panel
» The unit turns off automatically after
the set period of time.
1 In standby mode, press and hold MODE/
DIM repeatedly to select different levels
of brightness for the display panel.
Connect other devices
Listen to an audio player
You can listen to audio player through this
unit.
Set the alarm timer
1 Ensure that you have set the clock
correctly.
2 In standby mode, press and hold SLEEP/
TIMER.
» The hour digits are displayed and begin
to blink.
3 Press
/
to set the hour.
» The minute digits are displayed and
MP3 LINK
DVD/MP3 -WMA -CD COMPATIBLE
begin to blink.
4 Press
/
to set the minute.
5 Press DISC, TUNER or USB to set the
source of alarm sound.
6 Press SLEEP/TIMER to confirm.
» A clock icon appears on the display.
•
To activate/deactivate the wake-up timer,
press SLEEP/TIMER to toggle between:
•
•
•
[TIMER ON] (timer on)
1 Connect the supplied 3.5mm audio cable
to the MP3 LINK socket and to the
A clock icon appears on the display.
The unit turns on automatically at
the set time and switches to the set
source.
headphone socket on the audio player.
2 Select the MP3 Link source.
•
•
[TIMER OFF] (timer off)
3 Start play on the audio player.
Clock icon disappears on the display.
Note
• Alarm timer is not available under MP3 LINK
mode.
• If DISC/USB source is selected and the
track cannot be played, tuner is activated
automatically.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner (FM)
Tuning Range
Tuning grid
10 Product
information
87.5 - 108MHz
50KHz
Sensitivity
- Mono, 26dB S/N Ratio
<22 dBf
- Stereo, 46dB S/N Ratio <43 dBf
Note
Search Selectivity
>28dBf
Total Harmonic Distortion <2%
• Product information is subject to change
without prior notice.
Signal to Noise Ratio
>55dB
Speakers
Speaker
Specifications
8ohm
Impedance
Speaker Driver
Amplifier
3” Full range
Rated Output Power 2X10W + 40W RMS
Frequency Response 40 -20000 Hz, -3dB
Signal to Noise Ratio >67dB
+5.25”subwoofer
>82dB/m/W
Sensitivity
Aux Input
0.5V RMS 20k ohm
General information
AC Power
110 - 240V~, 50/60
Hz
Main unit: 22W;
Subwoofer: 45W
<4W
Disc
Laser Type
Disc Diameter
Video Decoding MPEG-1 / MPEG-2 / DivX
Video DAC
Signal System
Video Format
Video S/N
Audio DAC
Total Harmonic <1%
Distortion
Frequency
Response
Semiconductor
12cm/8cm
Operation Power
Consumption
Standby Power
Consumption
Composite Video
Output
Headphone Output
USB Direct
Dimensions
- Main Unit
(W x H x D)
- Active Subwoofer
Box (W x H x D)
Weight
- With Packing
- Main Unit
12Bits
1.0Vp-p, 75ohm
PAL / NTSC
4:3 / 16:9
>48dB
2X15mW 32ohm
Version 2.0
24Bits / 96kHz
525 x 90 x 200mm
600 x 400 x 308 mm
40Hz - 20kHz (44.1kHz)
40Hz - 22kHz (48kHz)
40Hz - 24kHz (96kHz)
>67dBA
S/N Ratio
8.8 kg
2.62 kg
- Active Subwoofer Box 3.03 kg
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported disc formats
USB playability information
•
•
•
•
Digital Video Discs (DVDs)
Video CDs (VCDs)
Super Video CDs (SVCDs)
Digital Video Discs + Rewritable
(DVD+RW)
Compatible USB devices:
•
•
•
USB flash memory (USB 2.0 or
USB1.1)
USB flash players (USB 2.0 or
USB1.1)
memory cards (requires an additional
card reader to work with this
apparatus)
•
•
•
•
•
•
Compact Discs (CDs)
Picture (Kodak, JPEG) files on CDR(W)
DivX(R) disc on CD-R(W):
DivX 3.11, 4.x and 5.x
DivX Ultra disc
Supported formats:
WMA
•
USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
Supported MP3-CD formats:
•
•
•
•
•
•
•
•
ISO 9660
Max. title/album name: 12 characters
Max. title number plus album: 255.
Max. nested directory: 8 levels.
Max. album number: 32.
•
•
WMA v9 or earlier
Directory nesting up to a maximum
of 8 levels
Number of albums/ folders:
maximum 99
Number of tracks/titles: maximum
999
ID3 tag v2.0 or later
•
•
Max. MP3 track number: 999.
Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
Supported Bit-rates of MP3 disc are: 32,
64, 96, 128, 192, 256 (kbps).
•
•
•
•
File name in Unicode UTF8
(maximum length: 128 bytes)
The following formats are not supported:
•
Files like *.VMA, *.AAC, *.DLF,
*.M3U,
*.PLS, *.WAV
Unsupported formats:
•
•
•
•
•
Empty albums: an empty album is an
Non-English Album/Title name
Discs recorded in Joliet format
MP3 Pro and MP3 with ID3 tag
album that does not contain MP3/
WMA files, and is not be shown in
the display.
•
Unsupported file formats are
skipped. For example, Word
documents (.doc) or MP3 files with
extension .dlf are ignored and not
played.
•
•
AAC, WAV, PCM audio files
DRM protected WMA files (.wav,
.m4a, .m4p, .mp4, .aac)
•
WMA files in Lossless format
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Black and white or distorted picture
11 Troubleshooting
•
The disc does not match the TV color
system standard (PAL/NTSC).
Sometimes a slight picture distortion may
appear. This is not a malfunction.
Clean the disc.
A distorted picture may appear during
progressive scan setup.
•
Note
•
•
• Never remove the casing of this system.
To keep the warranty valid, never try to repair
the system yourself.
The aspect ratio of theTV screen cannot be
changed even though you have set theTV
display format.
If you encounter problems when using this
system, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
Philips.com/support).When you contact Philips,
ensure that your Philips is nearby and the model
number and serial number are available.
•
The aspect ratio if fixed on the loaded
DVD disc.
The aspect ratio may not be changed for
some TV systems.
•
No sound or poor sound
No power
•
•
•
Adjust the volume.
•
•
•
Ensure that the AC cord of the apparatus
is connected properly.
Disconnect the headphone.
Ensure the wireless subwoofer is
connected.
Ensure that there is power at the AC
outlet.
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
Remote control does not work
•
Before you press any function button,
first select the correct source with the
remote control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the battery.
•
•
No disc detected
•
•
•
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
•
•
Aim the remote control directly at the
sensor on the front of the unit.
•
•
Replace or clean the disc.
Use a finalized CD or correct format disc.
Disc does not play
No picture
•
Insert a readable disc and ensure that the
•
•
Check the video connection.
label side faces outwards.
Turn on the TV to the correct Video-In
channel.
•
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•
Progressive scan is activated but the TV
does not support progressive scan.
•
•
Press SYSTEM MENU to exit the system
setup menu.
Disable the password for parental control
or change the rating level.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Moisture has condensed inside the
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
USB device not supported
•
The USB device is incompatible with the
unit. Try another one.
Timer does not work
•
•
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Poor radio reception
•
Increase the distance between the unit
and your TV or VCR.
Fully extend the FM antenna.
Connect an outdoor FM antenna instead.
•
•
•
Unable to select Progressive Scan
•
Ensure the video output mode is set to
[Pr/Cr Pb/Cb Y].
No sound on HDMI connection.
•
You may not hear any sound if the
connected device is non-HDCP
compliant or only DVI-compatible.
No picture on HDMI connection.
•
Check if the HDMI cable is faulty. Replace
a new HDMI cable.
If this happens when you change the
HDMI video resolution, select the correct
resolution until the picture appears.
•
Audio or subtitle languages cannot be set
•
The disc is not recorded with sound or
subtitles in multiple languages.
The audio or subtitle language setting is
prohibited on the disc.
•
Cannot display some files in USB device
•
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
The formats of these files are not
supported.
•
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Appendix
Mount to a wall
Caution
• Risk of product damage! Always consult
professional personnel to safely mount the
product to a wall.
• Risk of injury! Ensure that no supply ducts such
as gas, water or electricity are harmed when
you drill the holes.
What you’ll need
•
•
2 screws and 2 dowels (supplied)
Wall mounting instruction sheet
(supplied)
•
•
•
Electric drill
Screwdriver
Pencil
Mount the main unit
Caution
• Mount the main unit and speakers to a solid
concrete wall or plaster board wall only!
You can mount the main unit to the wall.
1 Use the supplied wall mounting
instruction sheet to mark the drilling
positions on the wall, then drill 2 holes as
marked.
2 Crew on the mounting dowels and
screws.
3 Hook the main unit in place.
Tip
• Refer to the supplied wall mounting instruction
sheet for details.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: DCM263_55_UM_V1.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|