How to ...
Discover Your Phone
Switch the
phone On/Off
Long press
)..
Back of the phone:
3.2 mega pixels
camera
262K color
TFT LCD
Enter your PIN
code
Enter your PIN code
through the on-screen
keypad and tap on OK to
confirm.
Touch screen
slide
Light sensor
Left softkey
On-screen
keypad
Turn on the Press any key to exit the
screen
power-saving mode.
Right softkey
Navigation and
O (OK) keys
Unlock
keypad
the Drag out the innermost dot.
Hang up and
on/off key
Microphone
Camera key
Or, push up the slide.
Lock
keypad
the On idle screen, tap on
Pick-up key
Shortcut > Phone lock.
Charger or
Headset
connector/
USB port
Make a call
On idle screen, tap on
Shortcut > Call (or, push up
the slide to use the keypad)
to enter the phone number.
Alphanumeric
keypad
Philips continuously strives to improve its products.
Therefore, Philips reserves the rights to revise this
user guide or withdraw it at any time without prior
notice. Philips provides this user guide “as is” and
does not accept, except as required by applicable
law, liability for any error, omission or discrepancy
between this user guide and the product described.
The device is meant to be connected to GSM/GPRS
networks.
Press
When the phone rings,
press
the Press
(.
Answer a call
(
.
Adjust
+
or
-.
volume during
a call
Download from Www.Somanuals.com. All Manuals Search And Download.
then OK. Tap on Options to access the options
related to the selected item. Tap on Back to return
Menus
Main menu
The main menu gives you access to all the different
features of your mobile phone. The table below
summarizes the functional icons on the main menu.
To find more information about their functions,
refer to the pages.
to the previous menu. Press
screen.
)
to return to the idle
Built-in functional displays
With the six built-in functional displays on the idle
screen, you can easily operate functions by tapping
on the touch screen. On the idle screen, the six
functional displays allow you to easily set/display
the clock, view calendar/schedule your time, edit/
show your memo, set/show world clock, play
music, and listen to radio.
Browser
Fun
Music
page 38
Camera
page 34
Messaging
page 40
My files
To switch between built-in functional
displays
• On current functional display, quickly move your
finger to the left or right.
page 35
Tools
page 18
Contacts
page 45
Profiles
• Or, long press <or > to move to another
functional display.
• Or, shake your phone to the left or right.
page 28
Bluetooth
page 25
Calls
page 51
Settings
To operate on built-in functional displays
• Tap on the central soft key on the idle screen.
• Or, press O.
Shortcut menu
page 49
page 47
page 52
The shortcut menu consists of up to 8 shortcuts to
Tap on Menu on idle screen to access the main menu.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
functional displays. Extend your quick access to
functional displays by selecting shortcuts to those
other than the six ones.
instructions.
Keys
To set your shortcut menu
1. Go to Settings > General > Shortcut.
2. Tap on Change to show the list of functional
displays.
3. To select/ unselect an option, tap on it, and
then Select /Uncheck.
Soft keys
The soft keys L, R and O allow you to select
the options above them on the screen. Such
options are contextual: they vary according to
current context.
4. Tap on Done to finish setting.
Fast keys
To use your shortcut menu
• On the idle screen, tap on Shortcut, and you can
select a functional display as desired.
0
1
#
Long press to enter “+” when
making international calls.
Long press to access the voice
mailbox.
The idle screen switches to the relevant display.
Stylus
Long press to select/unselect
Meeting profile (by default,
vibration on for incoming calls
or messages).
The touch screen allows you to enter text by
directly writing on the screen, or tap to select the
desired option. The supplied stylus makes it easier
to do so.
The first time you switch on the phone, you are
asked to do calibration for the stylus. Thus, strokes
or taps by the stylus will be precisely displayed on
the screen.
Senors
With built-in motion and light sensors, the phone
can react to motion and ambient luminance as
desired or necessary.
You can also do the calibration in Settings > General
>
Pen calibration by following the screen
3
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the motion sensor
• In Settings > Motion sensor > Mute incoming call or
Snooze mode, select On.
If a call rings, turn over the phone (front side to
back, or back side to front) to mute the ringtone.
In the idle mode, your phone can have the keypad
locked automatically after the set time span. When
the keypad is locked, a set of concentric circles
keep moving on the screen.
To set the auto keypad lock
Go to Settings > General > Auto keypad lock.
To unlock the keypad
Drag out the innermost dot. Or, push up the slide.
To interrupt the sounding alarm in the same way,
check that the Snooze is set to a time interval in
Tools > Alarm (see "To set an alarm" on page 30).
To stop the alarm, tap on Stop (see "To use an
alarm" on page 30).
To lock the keypad manually
On the idle screen, tap on Shortcut > Phone lock.
Or, pull down the slide (if On is selected in Settings
> General > Active slide lock).
To use the light sensor
• In Settings > Display > Light sensor, select On.
The phone will adjust backlight level automatically
according to ambient brightness. For power-saving
purposes, always turn on the light sensor.
Power-saving mode
After the set time span, the phone has the idle
screen turned off automatically. To exit the power-
saving mode, press any key. For power-saving
purpose, set the time span to a low value in Settings
> Display > Backlight duration.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Add or edit contacts ..................................... 25
1. Getting Started ..................................7
Search for a contact ...................................... 26
Manage your contacts ................................... 26
Share contact information with others...... 27
Special numbers ............................................. 27
Insert the SIM card ...........................................7
Charge the battery ..........................................8
Set clock...............................................................9
Insert Micro-SD card (memory card) ........ 10
6. Tools ..................................................28
2. Text Entry ........................................11
Use your business organizer
On-screen text entry .................................... 11
Keypad text entry........................................... 12
Create your to-do list .........................................28
Check your calendar............................................28
Edit your to-do list...............................................28
Delete expired tasks............................................29
Use your memo
Display a text memo on the idle screen .........29
Record a sound memo........................................29
Use your clock and timer
3. Calling ................................................14
Make a call ....................................................... 14
Answer and end a call ................................... 14
Options during a call ..................................... 15
Handle multiple calls .................................... 15
(network-dependent)
Alarm ......................................................................30
World clock...........................................................31
Stopwatch...............................................................31
Make an emergency call ............................... 16
4. Messaging ..........................................18
Use your file reader
Create messages ............................................ 18
Organize your messages................................ 19
Define your message settings ...................... 20
Email .................................................................. 22
Broadcast messages........................................ 24
Text reader............................................................31
Document reader.................................................32
Use the torch ................................................. 32
Use your business assistant
Business card reader............................................33
Firewall ...................................................................33
5. Contacts ...........................................25
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Calculator...............................................................33
Currency converter.............................................33
E-dictionary ...........................................................33
13. Bluetooth ....................................... 49
About Bluetooth ............................................ 49
Connect to a Bluetooth device .................. 49
Get connected by a Bluetooth device ...... 50
Edit your device list........................................ 50
7. Browser ............................................34
Manage your browser ...................................34
Access web sites ............................................34
Enable/disable push messages.......................34
STK.....................................................................34
14. Profiles ............................................ 51
Adjust ring settings to different scenes .... 51
15. Settings ........................................... 52
8. Camera .............................................35
General.............................................................. 52
Display............................................................... 54
Sounds .............................................................. 54
Connectivity .................................................... 55
Motion sensor.................................................. 55
Camera..............................................................35
Video recorder................................................37
9. Fun .....................................................38
Java .....................................................................38
Sensor games....................................................39
Icons & symbols .................................. 56
Precautions .......................................... 57
Tips.......................................................... 62
Troubleshooting ................................. 63
Philips Authentic Accessories .......... 65
Trademark Declaration ..................... 67
Specific Absorption Rate
10. Music ...............................................40
Music player......................................................40
FM radio ...........................................................42
11. My files ............................................45
Find your files ..................................................45
Manage your files ...........................................45
Share your files ...............................................46
Use your files ...................................................46
Information .......................................... 68
Limited warranty ................................ 70
Declaration of conformity ................ 73
12. Calls .................................................47
Call history ......................................................47
Call options .....................................................47
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. As shown, take out the battery.
1. Getting Started
Please read the safety instructions in the
“Precautions” section before using your phone.
To use your phone, you must insert a valid SIM card
supplied by your network operator or retailer. The
SIM card contains your subscription information,
your mobile phone number and a memory in which
you can store phone numbers and messages.
Insert the SIM card
Follow the steps below to insert your new SIM
cards. Remember to switch off your mobile phone
before removing the back cover.
1. Press on the back cover and slide the cover as
shown.
You may lose all your personal settings if you
remove the battery when the phone is switched
on.
3. As shown, align your SIM card with the SIM
card slot, clipped corner against you and gold
contact downwards. Insert your SIM card
under the metal clip holder.
Getting Started
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. As shown, align the metallic connectors on the
battery and battery slot. Insert the battery
until it is locked.
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged. The battery
symbol indicates the state of the battery. To charge
the battery, plug in the connector as shown below.
Then plug the other end into a power socket.
5. As shown, insert the back cover from the
bottom. Push the cover until it is locked.
During charging, the battery symbol scrolls.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off
the charger is to unplug it, so it is advisable to
use an easily accessible power socket.
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
Remove the protective film covering the screen
before using the phone.
8
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
press on + or - until you reach the desired
digits.
3. To select how to display the time, go to
Settings > General > Time & date > Display time:
Analog clock: Tap to show the time in a clock.
You can use the phone while it is charging. If
the battery is completely flat, the battery
symbol will only reappear after a few minutes
of charging.
Digital clock: Tap to show the time in digits
Tap OK to confirm.
.
Set clock
1. Check that your phone is switched on.
Long press ) if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-digit
secret code of your SIM card. It is
preconfigured and communicated to you by
your network operator or retailer.
Display local and international clocks
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
1. Check that you have set your local time and
date.
2. Go to Tools > World clock.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
Local setting/Foreign setting: Tap
<
or repeatedly
>
to select a city. If necessary, tap Options to turn
Daylight saving/Daylight saving for foreign city on
or off.
2. On idle screen, tap on Menu and go to Settings
> General > Time & date.
Set format: Select the time (12-hour or 24-hour
clock) and date format by pressing the
navigation keys
<,
>,
+,
-,
and OK.
Set time/date: Enter the time and date.
Tap on the box to be defined. To enter your
desired digits, tap + or -repeatedly, or long
Getting Started
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert Micro-SD card (memory
card)
You can expand the memory of your phone by
adding a micro-SD card.
Supported capacity: up to 8 GB
1. Follow Step 1 under "Insert the SIM card".
2. As shown, align your micro-SD card with the
slot. Push it into the slot until it is secure.
To remove the micro-SD card, press the card
to release it.
3. Follow Step 5 under "Insert the SIM card".
4. If necessary, turn off your phone, and turn it on
again.
10
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Tap on the keys to enter your desired letters,
numbers, or strokes.
2. Text entry
Your mobile phone supports the text entry
through the screen, or the alphanumeric keypad.
Push down or up the slide to switch between the
two entry modes.
: Tap to move to the beginning of the next
line.
: Tap to enter a space.
: Tap to enter symbols and punctuations.
: Tap to switch between upper and lower
cases (for English entry).
On-screen text entry
Using the supplied stylus (for the
handwriting recognition mode)
1. Tap to select
Select text entry modes
1. On the editing screen, push down the slide, if
necessary, to select the entry through the
screen.
: for English entry
: for numeric entry
2. Tap to select
: for the entry of Simplified Chinese
: for the entry of Traditional Chinese
2. Write on the screen using the supplied stylus,
as you do on paper using a pen.
: Tap to move to the beginning of the next
line.
:
text entry through the on-screen
keypad
: text entry through the supplied stylus
Enter text
Using the on-screen keypad
1. Tap to select
: Tap to enter a space.
: Tap to enter symbols and punctuations.
/
: for English entry
: for numeric entry
: Pinyin input for Simplified Chinese
Depending on the language you select for your
phone, the supported input methods may vary.
/
: Stroke input for Simplified/
Traditional Chinese
Text entry
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter text
Keypad text entry
1. Select your desired text entry methods.
2. Enter text by using the alphanumeric keypad.
2 to 9 To input letters (T9 input)
Press repeatedly to input the desired
letter (multi-tap input)
With the alphanumeric keypad, you can use a
number of text entry methods, including T9 input,
multi-tap input, numeric input and symbol input.
Select text entry methods
1. On the editing screen, push up the slide, if
necessary, to select the entry through the
alphanumeric keypad.
1 to 6 To enter strokes (stroke input)
<,>
To browse candidate
words (T9 input/multi-tap input)
To browse the candidate words on the
previous/next page (T9 input/multi-tap
input)
2. During text editing, press # repeatedly to
+
,
-
select your desired inputs:
/
/
: for English entry
: for numeric entry
Select
To confirm the selection
To input a space
: Pinyin input for Simplified Chinese
0
/
: Stroke input for Simplified/
R
Clear Short press to clear a letter,
long press to clear all entries.
If necessary, press R to exit the
input mode first.
Traditional Chinese
3. Long press * to switch the T9 English input
on or off.
4. To enter a symbol and punctuations, press *.
The text editor remembers the last input method
you have used before you exit the editing screen.
When you access the editor again, it will
automatically select the last input method you have
used.
®
T9 input
T9® predictive text input is an
intelligent editing mode for messages,
which includes
a
comprehensive
Tegic Euro. Pat.
App. 0842463
dictionary. It allows you to quickly
enter text. You need to press only
once on the key corresponding to
Depending on the language you select for your
phone, the supported input methods may vary.
12
Text entry
Download from Www.Somanuals.com. All Manuals Search And Download.
each letter needed to spell a word: keystrokes
input are analyzed and the word suggested by T9®
is displayed at the pop-up window.
desired character. The stroke input method in this
phone classifies a Chinese character into 5 basic
strokes: (horizontal, vertical, left falling stroke,
right falling stroke and over-down) as well as a
special stroke. When the stroke you need does not
correspond to the 5 basic strokes, replace it with
the special stroke (?).
Examples: how to enter the word "home":
1. Press
4,
6,
6,
3. The screen displays the
first word of a list: Good.
2. Press
3. Press
>
,
to scroll and select Home.
Select to confirm.
Multi-tap input (ABC/Abc/abc)
Press the keys that are marked with the
corresponding letter you wish to enter. Press once
to get the first letter on the key, press twice quickly
to get the second letter and so on until the letter
you want is displayed on the screen.
Example: how to enter the word "home":
Press
4
(DEF).
,
4
(GHI)
6,
6,
6
(MNO),
6
(MNO),
3
,
3
Stroke input
The principle of stroke input is to dissect and
separate every stroke of a Chinese character
according to sequence. When you wish to input the
character, press the keys corresponding to the
required strokes according to sequence to get the
Text entry
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed dial
3. Calling
On the idle screen, you can call a preset speed-dial
Make a call
number by long pressing a numeric key.
From idle screen
Set your speed-dial number before dialing it.
1. Enter the phone number using the
alphanumeric keypad. If necessary, push up the
slide first.
To assign a speed-dial key to a contact:
1. Go to Menu > Settings > General > Speed dial.
2. Select one of the locations (2 to 9).
3. In Contacts, assign to the location a contact
from your phonebook.
2. Press
3. Press
(
)
to dial the number.
to hang up.
For international calls, long press 0 to enter
In Phone number, assign to the location a
preset phone number.
the "+" sign for the international prefix.
Using the phonebook (see "Contacts" on
page 25)
Answer and end a call
1. Go to Contacts > View contacts to open the
When receiving a call, the number of the caller may
be displayed, depending on whether or not the
calling party has chosen to display his or her ID. If
the number is stored in the phonebook, then the
corresponding name is displayed.
contacts list.
To search for a contact, enter the contact
name (up to
5
characters) using the
alphanumeric keypad, or select a contact from
the list.
•
Answer the call: Press
you set Active slide to On under Menu > Settings
General
End the call: Press ), or push down the slide.
(, or push up the slide if
2. Press
(
to dial the selected number.
>
For IP calls (China only), select
L
Options
>
.
IP call.
•
•
You can preset your IP service number under
Calls > Call options > IP dial.
To answer or end a call using the supplied
one-key headset, see "Headset" on page 65.
3. Press
)
to hang up.
14
Calling
Download from Www.Somanuals.com. All Manuals Search And Download.
•
To reject calls from certain contacts, you can
add the contacts or numbers to your blacklist. (For
more information about the blacklist, see "Firewall"
on page 33).
In most countries, recording of telephone
conversation is subject to legislation. We advise
you to notify the caller if you intend to record
the conversation and only do so if they agree.
You should also ensure confidentiality of the
recordings.
The phone will not ring or vibrate if it is in Silent
mode (see "Profiles" on page 51 ).
To record a conversation during a call, select
LOptions and select Sound recorder. Recorded
sound is saved in *.amr format and stored in Audio
of My files menu. (see "Find your files" on page 45).
Options during a call
During a call, you can tap to select H-Free or H-Held
mode. Tap on Options to access the following
options:
Mute or unmute a call
During a call, select Options and set the Mute function
to On/Off. If you select Mute, the microphone will be
deactivated.
- Hold single call: Put current call on hold.
- End single call: End current call.
- Sound recorder: Record conversation during a
call.
- Mute: Mute/unmute the call.
- New call: Make another call.
- Message center: Send and receive messages.
- Calendar: Check your calendar (see "Check
your calendar" on page 28) during a call.
- Quick note: Edit a text memo to be shown on
the idle screen.
- Calculator: Use the calculator (see
"Calculator" on page 33) during a call.
- DTMF: Enable the touch tone dialing system.
Adjust the volume
During a call, press the + or - navigations keys to
increase or decrease the volume.
Handle multiple calls (network-
dependent)
You can handle two or more calls at the same time,
as well as make conference calls with your phone.
The availability of this feature is dependent on your
network operator and/or your subscription.
Calling
15
Download from Www.Somanuals.com. All Manuals Search And Download.
- Calendar to check your calendar (see "Check
your calendar" on page 28) during a call.
- Quick note to edit a text memo to be shown
on the idle screen.
- Calculator to use the calculator (see
"Calculator" on page 33) during a call.
- DTMF: Enable the touch tone dialing system.
Make a second call
You can make a second call when there is an active
call or with a call on hold. While on the phone, dial
the number (or select
phonebook) and press
hold and the second number is dialed. When the
second call is received, you can tap on Swap to
toggle between 2 calls, or select Options to access
the following options:
a
contact from the
(
. The first call is put on
Answer a second call
When you receive a second call while already in
communication, the phone will emit a beep tone
and the screen displays information about the
incoming call. You can then:
- H-Free to receive the call in handsfree or
handheld way.
- Conference to introduce the party into a
conference call.
- Transfer to connect the two calls. You are
disconnected when the transfer is
completed.
- End single call to disconnect one party from
the call.
Press
(
To answer the call (the first one
is put on hold).
Press
R
or To reject the call.
)
- End all calls to disconnect all parties from the
call.
- Sound recorder: Record conversation during a
call.
To receive
a
second call, you must first
deactivate Call divert (see 48)and activate Call
waiting (see 48).
- Mute: Mute/unmute the call.
- New call to make another call.
- Message center to send or receive messages
Make an emergency call
Without a SIM card in phone, you can pressRSOS
to make the emergency call.
16
Calling
Download from Www.Somanuals.com. All Manuals Search And Download.
With a SIM card in phone, you can enter the
emergency number in the idle mode, then press
(
.
In Europe, the standard emergency number is
112, in the UK, it is 999.
Calling
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Tap on Send to send the message to the
desired contact or contact group ( "Contacts"
on page 25).
4. Messaging
MMS
Your mobile phone can also send and receive MMS
(Multimedia Messaging Service) messages. With
MMS, you can send messages that contain pictures,
sound and text.
When sending MMS messages, make sure that your
recipient also has an MMS-enabled phone in order
to view your messages. Follow the steps described
below to compose and send an MMS.
1. Select Create Message > MMS, and enter the
following:
Create message
SMS
SMS enables you to send text messages to the
other party, using Short Messaging Service (SMS).
You can use the SMS menu to send messages to
another handphone or a device that is capable of
receiving SMS messages. To compose and send an
SMS message, follow the steps below:
1. Select Create message > SMS, and write your
message.
To
Enter the number or e-mail of the
recipient.
2. Tap on Options to access the following options:
Cc
Enter the number or e-mail of other
recipients to whom you wish to send a
copy of the message.
Save as
Draft: Save the SMS message to
Drafts.
Template: Save the SMS message as
an SMS template.
Insert contact Select to insert the name and
phone number of your contacts.
Use templates Select to insert a preset message.
Exit editor
Exit the editing screen.
18
Messaging
Download from Www.Somanuals.com. All Manuals Search And Download.
Add
bookmark
text
Add website information you saved
as a bookmark ( "Access web sites"
on page 34)
Bcc
Enter the number or e-mail of the recipients
to whom you wish to send a copy of the
message, by which the recipients in the
Bcc list will be invisible to other
recipients.
3. Tap on Done to access the next option:
Send only Send the MMS message only.
Subject Enter the subject of the MMS.
Save and send Save and Send the MMS message.
2. In Edit content, tap on Options to select your
options. Tap on Done to finish editing.
Add picture, Insert a slide into your message.
Save to Drafts Save the MMS message to Drafts.
Send options Set Validity period, Delivery
report, Read report, Priority.
Add audio,
Add video
The multimedia slide can consist of
a picture and an audio file, or a
video clip.
Exit
Exit
Use templates for messages
You can use ready-made messages as new
messages. 10 SMS and 5 MMS messages are preset
in the Templates folder.
Add slide
before, Add message.
slide after
Insert more slides into your
1. Select Templates > SMS or MMS.
2. Select your desired templates.
3. Tap on Options, and select Write message.
The ready-made messages appear on the edit
screen.
Slide timing Set the play time of MMS slides.
The default value is 5 seconds.
Preview
Preview current MMS message.
Tap on < and > to move to
previous or next page.
Organize your messages
Your messages are sorted in the following folders
on your phone memory and SIM card:
Add
attachment
Insert a file (txt, jar etc) to your
message.
Messaging
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Inbox: received messages
Sent: sent messages
Outbox: unsuccessfully sent messages
Drafts: messages saved as drafts
SIM Archive: messages saved in the SIM card
Spam box: rejected or filtered messages
Move to
SIM
Move the selected message to your
SIM card.
Use details, Extract the number or E-mail address
Use
number,
Use URL
of the sender or in the message to
create messages, make a call, or save
to the phonebook.
Extract the URL in the message to
connect to the website, or add as a
bookmark.
Find a message
• Enter a folder, and press + or - to select a
message.
Manage messages
Edit before Edit the sender’s phone number
calling before making a call
Press LOptions to access the following options:
For the SMS or MMS, or different folders,
available options may vary.
Delete all Delete all messages in the folder.
Properties Show the file information of current
message.
Reply
Reply to the sender.
Save object Save to your phone or memory card
(if inserted) the picture, audio, video,
or other attached file of current MMS
message.
Reply by
SMS
Reply to the MMS sender by SMS.
Reply all
Reply to the sender and all recipients
on the Cc and Bcc lists.
Define your message settings
Forward
Edit
Forward the selected message.
Edit and send the selected message.
Delete the selected message.
Some of your message settings are dependent on
the service you subscribe with the network
operator. Consult your network operator for your
account settings, general settings, server profile, or
Delete
20
Messaging
Download from Www.Somanuals.com. All Manuals Search And Download.
other relevant settings.
In Messaging > Settings > SMS,
General
settings
Delivery report: When set to On,
this option will inform you via SMS
whether or not your own SMS was
received.
Account
settings
Profile name: Edit the name of the
current profile.
SC address: Select your default SMS
center. If not available on your SIM
card, you must enter your SMS
center number.
Validity period: Select the length of
time your messages will be stored
in the SMS centre. This is useful
when the recipient is not
connected to the network (and
thus cannot receive your message
immediately).
This feature is subscription
dependent.
Reply path: When On, this option
allows you to transmit the number
of your SMS message center
together with the message. The
recipient can then reply using your
SMS center and not theirs. This
speeds up the rate of transmission.
This feature is subscription
dependent.
This feature is subscription
dependent.
Auto save SMS: Press , to select On
or Off.
On: The message is sent and saved
to the Sent folder.
Off: The message is sent only.
Message type: Select the format of
your sent messages. This option is
network dependent.
Messaging
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Server
profile
Set network configuration. Please
contact your network provider for
more information.
Memory
status
This option can display the
memory status of the messages
saved in the SIM card and the
phone.
Memory
status
View the memory status of your MMS.
Pref. bearer
This option allows you to set the
preferred transmission mode. You
can select Prefer GPRS, Prefer GSM
or GSM only. For further details,
please contact your network
operator.
E-mail
To send and receive E-mail, you need to
subscribe relevant services. Contact the
operator for the subscription and configuration
information.
In Messaging > Settings > MMS,
Compose
Set Creation mode, Picture resizing,
Best page time, Auto signature and
Signature.
This menu allows you to send E-mail to one or
several recipients at a time, including with an
attachment such as a JPEG picture. Once received,
your messages can be forwarded and the
attachments can be visualized with the appropriate
software.
Send
Set Validity period, Delivery report,
Read report, Priority, Slide timing and
Delivery time options for sending an
MMS message.
Set up E-mail profiles
Retrieve
Filter
Set Home network, Roaming, Read
report and Delivery report options for
receiving an MMS message.
Select E-mail > E-mail accounts.This menu allows
you to create new E-mail accounts and select one
to activate it. Consult the network operator for the
account information. If necessary, consult your
mail service provider for the mail server
configuration.
Set Anonymous and Advertisement
from whom you want to filter MMS
or e-mail messages.
22
Messaging
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Go to E-mail > E-mail accounts. Tap on Options,
and select New account.
2. Enter your account information as prompted.
- When entering symbols like @ and _, tap on
to turn on/ off the symbol input
keypad.
To receive E-mail automatically
1. Go to E-mail > E-mail accounts. Tap to select
your desired account.
2. Tap on Options, and select Edit > Advance.
3. In Account settings > Check interval, tap <, > to
select your desired time span.
- When selecting data account, tap on Edit and
select GPRS data. Check that you have
selected a GPRS Internet/Email connection
account.
- Consult your mail service provider for the
mail server configuration.
Your mail box will be checked automatically
after each time span.
Organize your E-mail
For your activated account, the Email is sorted in
the following folders:
3. When returning to the list of E-mail accounts,
tap on Activate to activate the selected E-mail
account.
Inbox: received E-mail
Outbox: unsuccessfully sent E-mail
Sent: sent E-mail
Drafts: Email saved as drafts
Write E-mail
To write E-mail, select E-mail > Write Email. Enter
the address (To), a copy (Cc), a blind copy (Bcc),
Subject and Attachment, and the e-mail content.
When you have finished writing your E-mail, press
Done. You can then select to Send, Send and save,
Save to draft or Quit without Saving.
1. Go to E-mail > E-mail accounts. Tap to select
your desired account. Tap on Activate to
activate the E-mail account.
2. Enter a folder and select a desired message.
Tap on Options to access the following options:
For different folders, available options may
vary.
Send and receive E-mail
Select E-mail > Send and receive.This menu allows
you to send E-mail from your phone to the
Internet, and receive E-mail from the Internet to
the mailbox you have preset on your phone.
Messaging
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Reply
Reply to the senders.
Delete
Delete current E-mail.
Reply without Reply to the sender without the
Broadcast message
content
email history.
Broadcast messages are public messages broadcast
to a group of mobile users. The messages are
broadcast on coded channels. Generally, one
broadcast channel can transmit one type of
message. Please contact your network operator for
a list of channel numbers and their respective
broadcast information.
Reply all
Reply to all senders.
Reply all
without
content
Reply to all senders without the
email history.
Forward
Forward the downloaded E-mail to
someone else.
Define settings for broadcast messages
Retrieve
options
Retrieve the complete mail.
This option is available when you
select Incoming server > Download
options > Header only in Edit >
Advance (See Step 1 and 2 in "To
receive E-mail automatically" on
page 23).
In Broadcast messages,
Receive
mode
Tap to turn the receive mode
on or off.
Read
message
Read messages when there are
received broadcast messages.
Languages Set language for the broadcast
Mark as
unread
Displays current E-mail as read.
message to be received.
Channel
settings
Define the channel for
broadcast messages.
Mark as
deleted
Displays current E-mail as deleted.
To delete the all the mail marked as
deleted, go to Email
>
Delete
marked Emails.
24
Messaging
Download from Www.Somanuals.com. All Manuals Search And Download.
2. On the idle screen, push up the slide, if
necessary, and enter the phone number you
wish to save. Tap on Options > Save:
5. Contacts
Name: Tap on Edit to go to the editing screen.
Select your desired text entry methods (see
"Text entry" on Page 11). Press R to exit the
input mode, if necessary. Tap on Done to finish
editing.
Contacts are stored in one of the two available
phonebooks: SIM phonebook (located on your SIM
card, by which the number of entries you can store
depends on the card capacity) or the Smart
Phonebook (located on your phone, which allows
you to store up to 1000 names). New contacts will
only be added to the phonebook you have selected.
Number: Enter the mobile number.
3. Add details as desired in other fields.
When selecting the contact picture, ringtone
or caller group, press < or > (To use a photo
as contact picture, see "To use a picture file as
contact picture or wallpaper" on Page 46).
4. Tap on Done to save.
Add or edit contacts
Add a contact to Smart phonebook
For contacts on the Smart Phonebook, you can add
detailed information, like home number, office
number, and identifying features, like contact
pictures and ringtones.
Add a contact to SIM phonebook
1. Go to Contacts > Advanced > Choose contacts
list > Preferred storage. Select SIM.
2. Follow Step 2 under "Add a contact to Smart
phonebook".
1. Go to Contacts > Advanced:
In Choose contacts list > Preferred storage, select
Phone;
In Contact details, select the items to be
defined for the new contact.
Edit a contact
1. Go to Contacts > View contacts.
2. Select your desired contact (see "Search for a
contact").
3. Tap on Options > Edit to edit the name and
phone number.
Contacts
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy, move or delete multiple contacts
1. Go to Contacts > View contacts.
2. Tap on Options > Select multiple > Copy to
phone/SIM, Move to phone/SIM, or Delete
selected contacts.
3. Select Select all or Select one by one to display a
fully checked or unchecked contacts list.
4. Tap to check or uncheck your selection.
5. Tap on Done to confirm.
Search for a contact
1. Go to Contacts > Advanced > Choose contacts
list > Default contact list. Select your desired
phonebook.
2. Go to Contact > View contacts.
3. To search for a contact, enter the contact
name (up to 5 characters) in the text box.
To enter text, tap on
to display the on-
screen keypad. To select the text entry
methods, tap on the language or numeric icon
next to the text box.
Copy, move or delete all contacts
1. Go to Contacts > Advanced.
2. Select Copy to SIM/phone, Move to SIM/Phone,
or Delete all contacts.
Manage your contacts
You can copy or move your contacts between the
two phonebooks. Also, you can group your
contacts as Family, Friends, Business and others as
you like. For different groups, you can use different
ringtones and contact pictures for identification,
and send messages to a group.
Group your contacts on the Smart
phonebook
1. Go to Contacts > View groups.
2. Select a group. You can rename the group,
select a ringtone and a contact picture, and
add contacts to Member list.
To add multiple contacts to a group,
you can also go to Contacts > View contacts. Tap on
Options, and select Select multiple > Add to group.
Copy, move or delete a contact
1. Go to Contacts > View contacts.
2. Select a desired contact (see "Search for a
contact").
3. Tap on Options to select Delete, Copy to phone/
SIM, or Move to phone/SIM.
26
Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
Share contact information with
others
You can share with others the contact information
in your phonebook. As desired, the information can
be sent via the SMS, MMS, E-mail or Bluetooth.
1. In Contacts > View contacts, select your desired
contact ("Search for a contact").
2. Tap on Options > Send vCard to send the
contact information via the SMS, MMS, E-mail
or Bluetooth.
Service
numbers
This service is provided by your
network operator. For more
information
regarding
the
corresponding function, please
contact your network operator.
Voice mail
Emergency
This menu allows you to set your
voice mail server number, as well as
retrieve your voice mails. Consult
the network operator for the
account information.
Select a voice mail box, and tap on
Edit: Edit voice mail server number.
Connect: Retrieve your voice mail.
Special numbers
Go to Contacts > Special numbers.This menu allows
you to keep a list of useful numbers such as own
numbers, service numbers, and emergency
numbers.
Tap on Edit to edit your emergency
phone number.
Options
Description
My
numbers
Tap on Edit to edit the phone
number or name to be shown on
the idle screen.
To show the number or name on
the idle screen, select On in Settings
> Display > Show own number.
Contacts
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Tools
Repeat
Press < or > once or more to repeat
the alarm at the specified time once,
everyday, weekly or monthly.
To repeat the alarm at certain days,
press < or > to select Days, tap on a
weekday or weekend, and then On/Off
to select or unselect the day.
Use your business organizer
You can add your new tasks to the phone. Such to-
do tasks are marked in your calender. You can
always check your calendar and remind yourself as
desired.
3. Tap on Done to save the task.
At the set time, the task note appears as a new
event on the idle screen.
Create your to-do list
Check your calendar
1. In Tools > Calendar, select a date in the
calendar, and tap on Options > Add event to add
a kind of task.
After creating your to-do lists, you can check your
calendar in day, weekly, or monthly views. In Tools
> Calendar, tap on Options or View task.
2. To keep yourself reminded, do the following:
You can also create your to-do list in the calendar
of different views.
Note
Add a note about the task.
Tap on Edit to edit the task. On the
editing screen, tap on Template to use
the preset note.
Edit your to-do list
1. In Tools > Calendar, tap on Options > View all to
enter the task list.
Alarm
Press < or > once or more to turn the
alarm on, have it sound 5,15 or 30
minutes before the specified time, or
turn the alarm off.
2. Select your desired task. Tap on Options to do
the following:
View
View the details of the selected
task.
28
Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
Record a sound memo
Add
Add a task.
You can make your own recording, and share it
with your friends via the MMS, E-mail, or
Bluetooth. Also, you can use the recording as the
ringtone of incoming calls or a contact.
Edit
Edit the selected task.
Delete the selected task.
Delete all the tasks.
Send the task as a message.
Delete
Delete all
Make recording
Send
vCalendar
1. Go to Tools > Sound recorder.
2. Tap on Record or Options > Record to start
recording.
3. Tap on Stop to stop recording.
A file name is generated.
4. Edit the file name as desired.
Select your desired text entry methods (see
"Text entry" on page 11). Press R to exit the
input mode, if necessary.
The recording file is saved.
Append recording to a file
1. Select the desired file.
2. Tap on Options > Append.
The new recording is added to the file.
Edit recording files
Delete expired tasks
You can quickly delete all tasks before current date
and time.
In Tools > Calendar, tap on Options > Delete expired
tasks.
Use your memo
You can use this phone to record your text or
sound memos.
Display a text memo on the idle screen
1. In Tools > Quick note, enter your memo.
Select your desired text entry methods (see
"Text entry" on page 11). Press R to exit the
input mode, if necessary.
1. Select the desired file.
2. Tap on Options to select Rename, Delete, or
Delete all files.
Send an audio file
1. Select the desired file.
2. Tap on Done to finish editing.
On the idle screen, you will see the text
memo.
Tools
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Tap on Options > Send to send the audio file via
the MMS, E-mail, or Bluetooth.
Set your recording as a ringtone
1. Select the desired file.
2. Tap on Options > Set as ringtone.
The recording is added to your ringtone file list.
The ringtone of your incoming calls is changed
to the recording. To change the ringtone, see
"Sounds" on page 54. To use the ringtone for
contacts, see "Add or edit contacts" on page 25 or
see "Group your contacts on the Smart
phonebook" on page 26.
the weekdays or weekends. To repeat the
alarm at certain days, press < or > to select
Days, tap on a weekday or weekend, and then
On/Off to select or unselect the day.
Alarm tone: Tap to select an alarm tone.
Snooze: Select Off, or an alarm interval: 5, 10,
or 20 minutes.
4. Tap on Done when you finish setting the alarm.
5. To turn off an alarm, tap on an alarm, and then
Off.
To use an alarm
On the set alarm time, your alarm sounds.
Select Stop: The alarm stops. If you have selected
repeat mode for the alarm (see “To set an alarm”),
it will sound again at the set time.
Select Snooze: The alarm will sound again after the
set Snooze interval.
To mute the sounding alarm, you can also turn
over the phone (front side to the back, back side to
the front, see "To use the motion sensor" on page
4).
Use your clock and timer
Alarm
You can set up to five alarms.
To set an alarm
1. Check that your clock is correctly set (see
"Set clock" on page 9).
2. Go to Tools > Alarm.
The screen of alarm list appears.
3. Select an alarm, and tap on Edit to enter the
alarm setting screen.
The alarm clock will ring even if your mobile
phone is switched off, or the Profiles is set to
Meeting or Silent.
Set time: Set the alarm time.
Repeat: Repeat the alarm once or on some of
30
Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
World clock
Use your file reader
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
Text reader
This menu allows you to view the text file (.txt file)
saved in your phone or the memory card. To view
a file through the text reader,
1. Check that you have set your local time and
date.
2. Go to Tools > World clock.
1. Copy and save the file to My files > Phone or
Memory card > Others > Ebook.
2. Go to Tools > Text reader. Tap on Select or
Options > Global settings > Select storage to
select the file location: phone or memory
card, if you have inserted a memory card into
your phone.
Local setting/Foreign setting: Tap
<
or
>
repeatedly to select a city. If necessary, tap
Options to turn Daylight saving/Daylight saving for
foreign city on or off.
Switch local/foreign: Tap to switch between
local and foreign clock.
Existing files are listed. To display the files as
desired, tap on Options > Sort by.
3. To display a file correctly, select your desired
file, and tap on Options > Global settings >
Encoding. Select the encoding suitable to your
language.
Alarms, reminders, programmed events are
time zone independent! If you set an alarm or
an event at 9:00 AM in time zone A, it will still
ring or be due at 9:00 AM if you change to time
zone B.
Stopwatch
To search for information when viewing a file
You search for specific words, marked information,
or different parts of the file. After opening the file,
tap on Options to select:
Use the stopwatch for your timing needs.
In Tools
>
Stopwatch,
• Tap on Start to start timing.
• Tap on Pause/Continue to pause or resume.
• Tap on Restart to reset the timer.
• Tap on Back to exit.
• Find: Find specific words in the file.
Tools
31
Download from Www.Somanuals.com. All Manuals Search And Download.
• Go to bookmark: Go to the marked information.
To do so, add a bookmark where desired by
tapping Options > Add bookmark.
drag the document.
To go to a certain page, tap on Options and
select:
• Jump to: Go to the beginning, middle, or end of
the file. To skip a certain percentage of the file,
select Input percentage and tap on Edit to enter
your desired percentage number.
Next page
Move to the next page.
Previous
page
Move to the previous page.
To clear the files created by the system
during E-book reading
• Tap on Options > Clean up bookshelf.
Goto page
Enter the number of the page you
wish to read.
To search for information when viewing a file
• Tap on Options and select:
Documents reader
This menu allows you to view the files in .txt, .pdf,
.doc, .ppt and . xls formats. To view a file through
the document reader,
Find
Search for specific words in the
document. The matched words are
marked in color.
1. Copy and save the file to My files > Others in
the phone or micro SD card.
Find next
Move to the next match.
2. Go to Tools > Documents reader menu. Tap on
Select or Options > Select storage to select the
file location, phone or memory card.
Existing files are listed. To display the files as
desired, tap on Options > Sort by.
3. Select your desired file, and tap on Open.
4. To zoom in or out, tap on Options > Zoom in
or Zoom out.
Use the torch
On the back of the phone, a torch function is
equipped, which you can also use as the flash for
camera. To turn on the torch,
• Select Tools > Torch. Tap on On.
• To turn on the torch from idle screen, include
Torch in the shortcut menu (see "Shortcut menu"
on page 2).
To move to
a
certain portion of the
document, use the stylus or your finger tip to
32
Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Tap on Options, and select Add to blacklist.
Use your business assistant
Calculator
Business card reader
Enter figures and operation symbols by using the
the on-screen numeric keypad.
This menu allows you to collect the business cards
information by directly scanning the business card
contents into Contacts.
Currency converter
Convert between different currencies based on
exchange rates.
1. In Tools
>
Business card reader,
Adjust the focus: press and hold the camera
key. Adjust the distance between the lens and
business card: in the viewing frame, the
business card shall be clear and recognizable.
The screen turns black. The recognition starts
until the recognition result is displayed.
1. In Tools
>
Currency converter, enter your
exchange rate in Rate. Tap on Done to
confirm.
2. Enter the sum of money in Local. Tap on Done.
You will get the result in Foreign.
2. Edit the information as desired.
3. Tap on Done to save the result.
The result of the calculator is indicative only.
The calculation accuracy is 10 decimal places.
The result is then truncated after the 10th
decimal digit for the next operation.
A new contact is created in your phonebook.
Firewall
Use the firewall to reject the incoming calls or
messages from those included in the blacklist.
Mode: Turn the firewall mode on or off.
Black list numbers: Edit a list of phone numbers.
You can reject all the calls or messages from such
numbers.
E-Dictionary (if available)
It is an English-Chinese and Chinese-English
dictionary. To look up a word in the dictionary,
1. Type in the word.
Select your desired text entry methods (see
"Text entry" on page 11). Press R to exit the
input mode, if necessary.
To add a phone number from your
phonebook
1. Go to Contacts > View contacts. Select your
2. Tap on OK to look up the word in the
dictionary.
desired contact.
Tools
33
Download from Www.Somanuals.com. All Manuals Search And Download.
and forward them in your messages (see "MMS" on
page 18).
7. Browser
Input address: Enter a web site address.
Recent pages: Access a web site you visited before.
You can use this function to browse the Internet.
Consult your network operator for the service
subscription, data account information, and WAP
settings.
Enable/disable push messages
WAP push messages are specially formatted SMS
messages that contain a URL. With such a URL, you
can connect to a web site address through the
WAP browser of your phone.
Manage your browser
To enable or disable the function, go to Browser
>
In Browser
>
Browser
>
Settings,
Settings
>
Service message settings.
Edit account: Define or select your Internet access
settings.
Browser options: Define the time for an access
attempt, or choose whether to show images on
web pages.
Clear cache, Clear cookies: Clear the history and
cookies of the browser.
STK
The availability of the features in this menu depends
on whether or not your SIM card supports STK. If
your SIM card supports STK function, the STK
menu will be displayed on the screen.
Access web sites
You can access a web site in different ways:
Homepage: Access the homepage. Save your
favorite web site as your homepage.
Bookmarks: Access the web site saved as
a
bookmark. By storing a website as bookmark, you
can save and quickly access your favorite websites,
34
Browser
Download from Www.Somanuals.com. All Manuals Search And Download.
To select photo settings
8. Camera
• Tap on
to select Image size and/or Quality.
• To store photos on the phone or memory card,
tap on
to select Storage.
Your mobile phone features a digital camera that
allows you to take pictures (up to 3.2 Mega pixels)
and record short video clips.
To select your shooting mode
• Continuous shooting: Shoot 3 or 9 photos in a
sequence at a time. Tap on
Continuous shot > 3-shot or Burst shot.
on the screen.
to select
appears
Camera
• Delayed shooting: Start shooting after the set
time span. Tap on to select Timer for timer
setting. The delay timer icon appears on the
screen.
Take photos
On the idle screen, long press the camera key, or
go to Menu > Camera. Tap on
camera, if necessary.
to switch to the
• Press the camera key gently to focus. A blue
square appears. Hold down the camera key until
the auto focus is completed and picture
captured.
Auto shooting setting
• Tap on
to select Scenes > Auto. Select Night
for shooting at night.
• Or, tap on
to take a photo without auto
focus.
• Press
to exit.
To zoom in or out
• Press or to zoom out or in.
+
-
• To avoid the impacts on photos caused by
flickers from lighting sources, such as fluorescent
Camera
35
Download from Www.Somanuals.com. All Manuals Search And Download.
lamps, select 50Hz in
power supply is 220V, and 60Hz if 110V.
Color settings:
• To remove the effects on colors by
surroundings, tap on
the scenes similar to yours.
• To add effects, tap on
your desired options.
> Banding if the AC
vice versa).
: Tap to exit.
To view photos one by one
1. In My files > Phone or Memory card > Pictures,
select the photo you will start with. Tap on
Options > Slide show.
2. To select the playback settings, tap on Settings:
Type of playback > Auto (Once): Play photos one
by one once and automatically.
> Picture mode to select
> Effects to select
Type of playback > Auto (Repeat): Play photos
one by one repeatedly and automatically.
To restore the default settings
• Tap on > Restore.
Type of playback > Manual: Tap on
/
to
move to previous or next photo.
Speed: Select long or short interval between
two photos.
Effect: Select the transition between two
View photos
All the pictures are saved to My files > Phone or
Memory card > Pictures，depending on the storage
location you selected. To view the pictures,
photos.
1. In the camera mode, tap on
> View
Horizontal view > On: Show photos in horizontal
view.
Horizontal view > Off: Show photos in vertical
view.
picture. Select your desired photo.
2. Tap on the screen to show the on-screen
menu, if necessary.
/
: Tap to move to previous or next
Share and use photos
photo. Or, press < or >.
See "My files" on page 45.
To zoom in or out the photo, tap on the zoom
icon on the screen, or turn the phone by 90
degrees (vertical to horizontal position, or
36
Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
• To avoid the impacts on video clips caused by
flickers from lighting sources, such as fluorescent
Video recorder
Video recording
lamps, select 50Hz in
> Banding if the AC
On the idle screen, long press the camera key, or
power supply is 220V, and 60Hz if 110V.
Color settings:
• To remove the effects on colors by the
go to Camera. Tap on
recorder, if necessary.
to switch to the video
• Tap on
• Press
to start or stop video recording.
to exit.
surroundings, tap on
> Picture mode to
select the scenes similar to yours.
• To add effects, tap on
your desired options.
> Effects to select
To select file settings
• Tap on
to set the file size, format, and image
quality in File size limit, Encode format and Quality.
• To store photos on the phone or memory card,
Play video clips
Your video recording is saved to My files > Phone
or Memory card > Videos. To play a video clip,
tap on
to select Storage.
To select recording settings
1. In the video mode, tap on
Select your desired video clip.
2. Tap on the screen to show the on-screen
menu, if necessary.
> View video.
•
•
> Record audio: Turn it on to make audio
recording in the time of video recording.
> Rec time limit: Set a time limit to the
recording.
: Tap to start or pause playback.
: Tap to search forward.
: Tap to exit.
: Tap to select your playback settings.
: Tap to switch to the camera mode.
Auto shooting setting
• Tap on
to select Scenes > Auto. Select Night
for shooting at night.
Manual shooting setting
• Light settings:
Share video clips
See "My files" on page 45.
Tap on
to select your EV (exposure value)
options.
Camera
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Run Java games and applications
9. Fun
Your phone is preloaded with some Java games and
applications. Select your desired program, tap on
Launch to start it.
Java
To run some Java applications (untrusted third
party software) on your phone, you may need to
adjust the Java settings.
1. In Fun > Java, select the application to be
launched.
2. Tap on Options > Setting, and select your
option as needed:
Network access: permission to network access
Your mobile phone features a Java run-time
environment, which allows you to run Java
applications, such as games downloaded from the
network.
The first time you launch Java, a message appears to
alert you that the installation and configuration of
Java will take several moments.
Install Java games and applications
Auto invocation: permission to launch the MIDlet
automatically
Messaging: permission to send and receive
You can download Java games and applications
from the Internet to your phone via the WAP, or
install them from PC via the supplied USB cable.
messages
Multimedia: permission to photographing, or sound/
Consult your network operator for the services.
video recording
Read user data: permission to read your data, like
contacts and calendar entries
Write user data: permission to write your data
When installing games via a USB data cable, make
sure that you save the .jar and .jad files in the same
file folder under My files > Others on your phone or
memory card. Select a file to be installed，and tap
on Intall to start the installation.
Local connectivity: permission to local connectivity,
like the Bluetooth connectivity.
38
Fun
Download from Www.Somanuals.com. All Manuals Search And Download.
Sensor games
In Fun > Sensor games, your phone is preloaded with
some sensor games, for which you can use the
built-in motion sensor.
In the games, to go to the left or right, you can
move your phone in the direction.
Fun
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer music files from PC to your phone
1. Use the supplied USB data cable to connect
your phone with the PC. Select Mass storage
on your phone.
10. Music
2. Copy the music files from the PC to the Audio
folder on your phone or memory card (see
"Insert Micro-SD card (memory card)" on
Page 10).
3. Remove your phone (a USB mass storage
device) from the PC safely.
Music player
Save MP3, WMA, AAC, AAC ＋ , and AMR music
files under the Audio folder on your phone or
memory card. You can play the music on your
phone.
4. On your phone, go to Music > Music player >
Settings > Refresh list.
Create your music library
Edit music files on your PC
All the music files are transferred.
1. Run Windows Media Player (or other music
management program) on your PC.
2. To add music files, click Media Library on the
left menu, and then click Add on the top menu.
3. On the left pane, select All Music.
On the right pane, all the music files you
added are displayed.
Play music
The music files are organized in two folders on the
phone or memory card.
All songs: all the songs on your phone.
Artists: songs sorted by artist.
Play music files
4. Click Title, Artist, Album to edit them as
desired.
1. If you have inserted a memory card on your
phone, select your music source in Music >
Music player > Settings > Music source: Phone or
Memory card.
2. Select your desired song in a folder.
You start playback from the song. On the
Operations may vary according to music
management software or Windows Media
Player versions. Consult the help file of the
software.
40
Music
Download from Www.Somanuals.com. All Manuals Search And Download.
playback screen, the file information and
selected playback settings are displayed.
3. To select your plackback settings,
Tap on Options:
To continue to play music after exiting the
music player,
go to Music > Music player > Settings > Play in
background, and select Ask first or Always.
Add to ringtone list: Set current song as the
ringtone of incoming calls.
Play in background: Continue to play music
after exiting the music player.
Add to playlist: Add current song to a selected
playlist.
Repeat: Select One to play current file
repeatedly; select All to play all the files in the
folder repeatedly.
Shuffle > On: Play music files in the folder
randomly.
Tap on Options > Equaliser to select sound
settings suitable to your songs.
To turn off the music player on the idle
screen,
• Press ), and then tap on Yes.
When listening to music, adjust the volume to a
moderate level. Continuous exposure to high
volume may impair your hearing.
Create playlists
You can create up to 10 playlists for songs that you
wish to play at this time. Your last played songs are
saved to My playlists
>
Last played.
1. Select your desired song.
2. Tap on Options > Add to playlist.
Existing playlists are displayed.
4. During playback (on the playback screen),
If necessary, select Now playing on the Music
player screen to go to the playback screen.
3. To create a new playlist, select My playlists
>
New playlist, and then assign a file name to the
playlist. Repeat Step 1 and 2.
4. Select the playlist where you add the song.
The song is added to the selected playlist.
/
/
: tap to start or pause playback
: tap repeatedly to select a song.
+ or -: tap to adjust the volume
R: press to return to the previous menu
): press to go to the idle screen
Music
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Listen to music through a stereo
Bluetooth headset
FM radio
To tune to a radio station, always plug the supplied
headset into your phone.
• Auto tune:
In Music > FM radio, select Options > Preset auto
search.
1. Check that your phone is connected to a
stereo Bluetooth headset that supports
A2DP profile (Bluetooth stereo output).
For the Bluetooth connection, see "Connect
to a Bluetooth device" on Page 49.
2. In Music > Music player > Settings > Bluetooth
settings,
The
radio
frequency
scanning
starts
automatically. Up to 20 available radio stations
are saved to Channel.
The first preset radio station starts to play.
BT stereo output: Tap on < or > to select On.
BT stereo headset: Tap to select a connected
stereo Bluetooth headset.
Or,
3. Play your music files (see "Play music" on Page
40).
To play music through the loudspeaker again
1. Select Off in BT stereo output (see Step 2 in
"Listen to music through a stereo Bluetooth
headset").
- In Music > FM radio, press
or
to start
the auto tuning to the next available station,
if no preset station is stored in the channel
list.
• Manual tune:
In Music > FM radio, select Options > Manual input
to enter your desired radio frequency.
Or,
2. Turn off the Bluetooth headset.
- In Music > FM radio, repeatedly long press
or
to tune to an available station, if
no preset station is stored in the channel list.
42
Music
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit the channel list
Listen to a radio station
1. Go to Music > FM radio.
The last played station starts to play.
2. Tune to your desired station. To select a
preset station,
You can assign a preset to a certain location. When
pressing the numeric key on the radio playback
screen, you tune to the station immediately.
1. In Music > FM radio, tap on Channel to enter
the channel list.
- press
or
repeatedly;
- or, tap on Channel;
2. Tap on a location for your preset .
3. Tap on Edit or Options > Edit to edit the
channel list:
Channel name: Name or rename the channel.
Frequency: Enter your desired frequency.
The old frequency in the location is replaced.
Or
1. Tune to your desired station (see "Tune to a
radio station").
2. On the radio playback screen, long press your
desired numeric key.
- or, press a numeric key.
3. On the radio playback screen,
: Tap to pause or resume radio playback.
+/-: Tap to turn up or down volume.
Options > Play in background: Tap to exit the
radio and continue playback.
Options > Loud speaker: Turn it on to listen to
the radio through the speaker.
Options > Turn off FM radio: Turn off and exit
the radio.
4. To return to the idle screen during playback,
press).
To turn off the radio on the idle screen,
Current station is saved to the location
(corresponding to the numeric key) in
Channel.
• Press ), and then tap on Yes.
3. To edit the channel name, tap on Channel to
select a channel. Tap on Options > Edit to edit
the channel name.
Music
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Record radio programs
You can record a radio program when listening to
it.
1. On the radio playback screen, tap on Options >
Record to start recording.
2. Tap on Pause/Cont. to pause or resume
recording. Tap on Stop to stop recording.
A file name is generated for the recording file.
Edit the file name as desired, if necessary.
3. Tap on Save to save the file.
You can find the recording file under My files >
Phone or Memory card > Audio.
RDS (dependent on the radio station
service)
The feature RDS (Radio Data System) is a
service that allows FM stations to send additional
information along with the regular FM radio
signal.
When you are listening to an RDS station, received
text information appears on the screen, including
station name, program type (for example, News,
Sports, and Info), and frequency.
To enable the RDS reception of your phone,
• In Music > FM radio, tap on Options > RDS, and
select On.
44
Music
Download from Www.Somanuals.com. All Manuals Search And Download.
Select your default storage location
11. My files
• Go to Settings
>
General
>
Default storage. Tap to
select the default location, phone or memory
card.
Manage your files
On the phone, all the files are stored under the
folders of the phone memory or memory card.
Create sub-folders
You can create sub-folders under the folders (like
Pictures, Videos, Audio and Others) or an existing sub-
folder.
Find your files
1. Go to My files.
2. Select Phone or Memory card, if you have
installed a memory card on your phone. Select
your desired file folder:
1. Select a folder or sub-folder under which you
wish to create a folder.
2. Tap on Options
>
New folder.
Pictures: for photos, .jpg files and others
Videos: for video files, and others
Audio: for audio files, like sound recording,
radio recording, music files, ringtones, and
others
3. In the editing screen, enter a file name.
Select your desired text entry methods (see
"Text entry" on page 11). Press R to exit the
input mode, if necessary. Tap on Done to finish
editing.
Others: for all other files, like Ebook (for files
A sub-folder is created.
readable through Tools
readable through Tools
>
Text reader), files
Manage your files
>
Document reader, and
You can copy and move, delete, or rename your
files.
files received via the Bluetooth
3. If necessary, open a folder, and tap on Options
to select your view settings:
1. Select a file under a folder.
2. Tap on Options to select your desired option.
3. To copy or move a file, select the desired
folder, and tap on
Sort by: Show files in the order of name, type,
time or size.
My files
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Done: Move or copy the file to current folder
or sub-folder.
Use your files
To use a picture file as contact picture or
wallpaper
Open
under current folder/sub-folder.
Open Options New folder: Create a sub-
>
Options
>
Open: Open a sub-folder
Select the photo, and tap on Options > Use.
The photo is set to the wallpaper (see "Display" on
page 54), or the contact picture of a contact in your
Smart Phonebook (for the image size 240 x 400,
see "Add a contact to Smart phonebook" on page
25).
>
>
folder under current folder/sub-folder.
To copy, move, or delete multiple files,
1. In a file folder, tap on Options
>
Select multiple,
and select your desired option.
2. Select Select all or Select one by one to display a
fully checked or unchecked list.
3. Tap to check or uncheck your selection.
4. Tap on Done to confirm.
To set an audio file as ringtone
Select an audio file, and tap on Options
>
Set as
ringtone.
You can set the audio file to ringtone (see "Sounds"
on page 54), or contact ID (see "Add a contact to
Smart phonebook" on page 25).
Share your files
You can share your picture, audio or video files
with others via the MMS, E-mail, or Bluetooth.
1. Select your desired picture, audio or video
file, and tap on Options
>
Send.
2. Select the option to send the file via the MMS,
E-mail, or bluetooth.
If you send your files via the Bluetooth, check
your Bluetooth connection first.
(see "Bluetooth" on page 49 )
46
My files
Download from Www.Somanuals.com. All Manuals Search And Download.
Call options
This menu allows you to set call-related options.
12. Calls
Headset
answer
Turn it on to answer an incoming
call automatically when using a
headset (see "Headset" on
page 65). Tap to turn it On or Off.
Call history
You are provided with the records about your
incoming and outgoing calls.
Any key
answer
Turn it on to answer an incoming
call by briefly pressing any key (
except for ) and R). Tap to turn
it On or Off.
Go to View calls to check your call history.
You can reply to such calls or add such contacts to
your phone book. Go to the call list, select the
contact or phone number, and tap on Options to
select your options.
Call time
reminder
Get reminded after the specified
call time span once or repeatedly.
Go to Clear history to clear your call history as
desired.
Calls
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Call services Call timers: Depending on your
network, rounding-off for billing
purposes, taxes and others, the
actual time invoiced for calls and
services by your service provider
may vary.
Call barring
Set limits to your incoming and
outgoing calls. Select Change barring
passward to change the call barring
password.
(network-dependent and requiring
a call barring password provided by
the network operator).
Call cost: network-dependent
Call waiting: Get informed of an
incoming call when on phone
(network-dependent, see "Answer
a second call" on page 16).
Caller ID: Set how to show your
number to the called party
(network-dependent).
Auto redial
Fixed dial
Keep redialing the call number that
fails to go through.
Restrict your outgoing calls to
certain numbers (PIN2 code
required).
IP dial
(network -dependent, available only
in China): Add the preset IP
number to outgoing call numbers.
Call divert
Divert incoming calls to your voice
mailbox or to another phone
number (regardless of whether or
not the number is in your
phonebook).
48
Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select the device you wish to connect.
4. Enter your Bluetooth password (0000 by
default) to start pairing.
13. Bluetooth
The pairing is made if your pairing request is
accepted by the other device.
About Bluetooth
To listen to music or audio files through a
Bluetooth headset
Consult the user documentation of the Bluetooth
headset. Check that your Bluetooth headset
supports A2DP profile (Bluetooth stereo output).
Your phone supports Bluetooth wireless
technology, allowing connection to a compatible
Bluetooth device within 10 meters. The Bluetooth
connection can be subject to interference from
obstructions such as walls or other electronic
devices.
Before you can apply Bluetooth, make sure the
other device supports Bluetooth function by
contacting the device’s manufacturer or its
accompanied documentation.
To control music playback through a
Bluetooth headset
Consult the user documentation of the Bluetooth
headset. Check that your Bluetooth headset
supports AVRCP profile (audio/video remote
control).
Connect to a Bluetooth device
Consult the user documentation of the Bluetooth
device to be connected. Prepare the Bluetooth
device for pairing.
To connect to a device you connected previously
1. On the device, check that the Bluetooth
function is enabled.
2. Turn on the Bluetooth of your phone.
1. Go to Bluetooth
>
Power. Tap on On, if
necessary, to turn on the bluetooth function.
2. Select Find devices to start searching for
available Bluetooth devices.
3. On your phone, go to Bluetooth
>
My devices.
Check that the device is in the list.
A list of available Bluetooth devices appears.
Bluetooth
49
Download from Www.Somanuals.com. All Manuals Search And Download.
The connection is established. If necessary,
select the device and tap on Connect.
If you do not use the Bluetooth feature for
some time, you should deactivate it in order to
conserve battery power.
Get connected by a Bluetooth
device
1. Go to Bluetooth
>
Settings:
Change device name: Edit the name of your
phone.
Visibility: Turn it on to make your phone
visible to other Bluetooth devices
2. Go to Bluetooth
>
Power. Tap on On, if
necessary, to turn on the bluetooth function.
The pairing is made when you receive and
accept the pairing request (enter the
password 0000 if necessary).
Edit your device list
All the devices you have connected are saved to
My devices. To edit the device list,
1. Go to Bluetooth
>
My devices.
2. To rename or delete a device, tap on Options
to select your options.
50
Bluetooth
Download from Www.Somanuals.com. All Manuals Search And Download.
Apply a profile
14. Profiles
1. In Profiles, select the profile to be applied.
2. Tap on Activate to activate the profile.
To activate the Meeting mode, long press #
on the idle screen.
Adjust ringer settings to different
scenes
The profiles are defined for several scenes. They
consist of the settings for ringtones, volume, and
others. With preset profiles, you can easily adjust
the settings for incoming calls and messages as
desired.
If you select Flight mode, you disable the
connection between your phone and your
mobile phone network.
Define your profiles
This phone has provided you several preset
profiles. You can use the default settings or change
them as desired.
The settings for Flight mode (on a plane) and
Silent mode are unchangeable.
To change the settings:
1. In Profiles, select the profile to be changed. Tap
on Modify.
2. Select the item to be changed. Tap to select
your desired options.
3. Repeat Step 2 until you finish the settings. Tap
on OK.
Profiles
51
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Settings
PIN protection: Set PIN or PIN2
password protection for your SIM
card. (The PIN or PIN2 are
provided by the network operator.
)
General
Change PIN and Change PIN2:
Change your PIN and PIN2
passwords as desired.
Language
Select a language for your phone.
Time & date Set the clock of the phone (See "Set
clock" on page 9 and "Display local
and international clocks" on page
9).
If you enter an incorrect PIN
code three times in succession,
the PIN code of your SIM card
will be locked automatically and
you will be prompted to enter
the PUK code to unlock it. You
can obtain the PUK code from
your network operator. If you
enter an incorrect PUK code ten
times in succession, the SIM card
will be locked permanently.
When this happens, please
contact your network operator
or retailer.
Auto power-on time: Set time for the
phone to be switched on
automatically.
Auto power-off time: Set time for the
phone to be switched off
automatically.
Pen
calibration
This menu allows you to calibrate
the stylus (See "Stylus" on page 3).
Security setup This menu allows you to use
passwords to protect your SIM
card, phone, and information
stored on the phone.
52
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone lock: Set password protection
for your phone. You are required
to enter the password each time
you turn on the phone (1122 by
default).
Default
storage
Select the default storage location
for your files: phone or memory
card (if a memory card is inserted
on your phone).
Memory
status
Check the memory occpancy of
Contacts, Messaging and My files:
on phone and SIM card, or on
Safeguard: Set password protection
for the information stored on your
phone.
phone and memory card (if
a
• Safeguard: Enter your password
to turn the password protection
on or off (1122 by default).
• Activation: Enter your password
to select the information that
accepts the password protection:
msg(s), Contacts, View calls or/and
Speed dial.
memory card is inserted on your
phone).
Active slide
Select whether to answer an
incoming call by pushing up the
slide. Tap to select On or Off.
Active slide
lock
Select whether to lock the keypad
by pulling down the slide. Tap to
select On or Off.
• Change
safeguard
password:
Change your password as
desired.
Auto keypad Set an idle time span for the keypad
lock
to be locked automatically.
To unlock the keypad, push up the
slide, or drag out the innermost
dot.
Speed dial
Shortcut
Call a contact by long pressing a
numeric key (See "Speed dial" on
page 14).
Set the quick access menu on the
idle screen (See "Shortcut menu"
on page 2).
Settings
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Factory
settings
Restore your phone settings to the
default values. You need to enter
your phone lock password (1122 by
default).
Greeting
Select whether to show greetings
when your phone is turned on.
Light sensor
Select whether to have the
backlight
automatically
luminance.
level
to
adjusted
ambient
Display
Wallpaper
Select an image as the wall paper
of your phone. You can select
either a default wallpaper or one
of your pictures stored in My files.
Sounds
Alert type
Ringtones
Select alert types.
Select a ringtone for incoming calls
and messages.
Themes
Define the theme for your phone.
Backlight level Select the brightness of backlight.
Ring volume Adjust the volume of rings.
Backlight
duration
Select the duration of backlight.
Key sound
Select whether the key sounds when
pressed.
Show
number
own Select whether to show your
phone number or name on the
idle screen. Set your phone
number or name in Contacts >
Extra numbers > My numbers.
Slide sound
Select whether the slide sounds
when you push it up or down.
Tap vibration Select
whether
there
is
accompanyingvibrationforeachtap.
Shutter sound Select shutter sounds for your
camera.
54
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
change the network, some problems may arise
during the operation of your phone.
Battery low
Select whether a warning tone is
emitted when the battery level is
low.
Browser
See "Manage your browser" and "Enable/disable
push messages" on page 34.
Connectivity
This menu allows you to define the service settings
available on your phone.
Connections
The menu allows you to define the Internet access
profiles of your phone. Such profiles are usually
pre-defined in your SIM card. Consult your
network operator for details.
Call options
See "Call options" on page 47.
Message settings
See "Define your message settings" on page 20.
Java settings
Java audio
Set the volume level.
Network settings
Java vibration Turn the vibration On or Off.
Network
selection
Select the network for your phone
(service subscription-dependent).
Java network Select a Java network (service
Automatic is recommended.
subscription-dependent).
Heap size
Display allowed maximum size for
Java memory.
GPRS
connection
Select how to search the network.
Preferences Select your preferred network.
Motion sensor
See "Senors" on page 3
You can select a network other than your home
network only if it has
a
valid roaming
agreement with your home network. If you
Settings
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth feature is activated.
Icons & symbols
The Bluetooth headset is connected.
In idle mode, several symbols can be displayed
simultaneously on the main screen.
Headset - The headset is plugged into the
phone.
If the network symbol is not displayed, the
network is currently not available. You may be
in a bad reception area; moving to a different
location may help.
Alarm
-
The alarm clock has been
activated.
Roaming - Displayed when your phone is
registered to a network other than your
own (especially when you’re abroad).
Silent - Your phone will not ring when
receiving a call.
Home zone - A zone designated by your
Vibration only - The phone will vibrate
when there is an incoming call.
network
operator.
Subscription
dependent, contact your service provider
for details.
Battery - The bars indicate the battery level
(4 bars=full, 1 bar=low).
GSM Network - your phone is connected
to the GSM network.
Reception quality - the more bars are
shown the better the reception is.
SMS - You have received a new SMS
message.
MMS message - You have received a new
multimedia message.
GPRS attach - Your phone is connected to
the GPRS network.
Wap message - You have received a Wap
push message in the message inbox.
EDGE attach - Your phone is connected to
the EDGE network.
Missed call - You have a missed call.
Firewall - You have turned on the firewall.
Call divert - All your incoming voice calls
are being forwarded to a number.
56
Download from Www.Somanuals.com. All Manuals Search And DownIlcooand.s & symbols
borrowing your phone.Furthermore to prevent
unauthorized use of your phone:
Precautions
Keep your phone in a safe place and keep
it out of small children's reach.
Avoid writing down your PIN code. Try
to remember it instead.
Radio Waves
Your cellular mobile phone is a low
power radio transmitter and
receiver. When it is operating, it sends
and receives radio waves. The radio waves
carry your voice or data signal to a base station that
is connected to the telephone network. The
network controls the power at which the phone
transmits.
• Your phone transmits/receives radio waves in the
GSM frequency (850/900 / 1800 / 1900 MHz).
• The GSM network controls transmission power
(0.01 to 2 watts).
• Your phone complies with all relevant safety
standards.
• The CE mark on your phone shows compliancy
with European electromagnetic compatibility
(Ref. 89/336/EEC) and low voltage directives
(Ref. 73/23/EEC).
Switch off the phone and remove the battery if you
are going to leave it unused for a long time.
Change your PIN code after purchasing the phone
and to activate call restriction options.
The design of your phone complies with
all applicable laws and regulations.
However your phone may cause
interference with other electronic
devices. Consequently you should follow all local
recommendations and regulations when using
your cellular phone both at home and when away.
Regulations on the use of cellular phones in
vehicles and aircraft are particularly
stringent.
Public concern has been focused for some time on
the possible health risks for users of cellular phones.
The current research on radio wave technology,
including the GSM technology, has been reviewed
and safety standards have been drawn up to ensure
protection from exposure to radio wave energy.
Your cellular mobile phone is your responsibility.
To avoid damage to yourself, to others or to the
phone itself, read and follow all the safety
instructions and make them known to anyone
PrecautionsDownload from Www.Somanuals.com. All Manuals Search And Download.
57
Your cellular telephone complies with all
applicable safety standards and the Radio
Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC.
liquefied petroleum gas (LPG), check first that the
vehicle complies with the applicable safety rules.
In areas where you are requested to turn off radio
transmitting devices, such as quarries or other
areas where blasting operations are in progress.
Check with the vehicle manufacturer that
electronic equipment used in your
vehicle will not be affected by radio
energy.
Always switch off your phone
Inadequately protected or sensitive electronic
equipment may be affected by radio energy. This
interference can lead to accidents.
Before boarding an aircraft and/or when
packing the phone in your luggage: the use
of mobile phones in an aircraft may be
dangerous for the operation of the aircraft, disrupt
the mobile phones network and may be illegal.
In hospitals, clinics, other health care
centres and anywhere else where you may
be in the close vicinity of medical
equipment.
Pacemakers
If you have a pacemaker:
• Always keep the phone more than 15 cm from
your pacemaker when the phone is switched on,
in order to avoid potential interference.
• Do not carry the phone in a breast pocket.
• Use the ear opposite to the pacemaker to
minimize the potential interference.
• Switch off your phone if you suspect that
interference is taking place.
In areas with a potentially explosive
atmosphere (e.g. petrol stations and
also areas where the air contains dust
particles, such as metal powders).
Users of hearing aids
If you are a user of a hearing aid, consult your
physician and hearing aid manufacturer to learn
whether your particular device is susceptible to
cellular phone interference.
In a vehicle transporting flammable products (even
if the vehicle is parked) or a vehicle powered by
58
Download from Www.Somanuals.com. All Manuals Search And Download.Precautions
period of time as well as avoiding unnecessary
navigating in the menus will also help to save the
battery's energy for longer phoning and stand-by
performances.
Improved performance
In order to improve the performance of your
phone, reduce radio energy emission, reduce
battery consumption and ensure safe
operation adhere to the following guidelines:
For the optimal and satisfactory operation
of the phone, you are recommended to
use the phone in the normal operating
position (when not using in hands-free
mode or with a hands-free accessory).
• Do not expose your phone to extreme
temperatures.
• Treat the phone with care. Any misuse will void
the International Guarantee.
• Do not immerse the phone in any liquid; if your
phone is damp, switch it off, remove the battery.
and let them dry for 24hrs before using them
again.
• To clean the phone, wipe it with a soft cloth.
• Placing and receiving calls consumes the same
amount of battery energy. However, the mobile
consumes less energy in idle screen when kept in
the same place. When in idle screen and while
you are moving, your phone consumes energy to
transmit updated location information to the
network. Setting the backlight for a shorter
Battery information
• Your phone is powered by
battery.
a
rechargeable
• Use specified charger only.
• Do not incinerate.
• Do not deform or open the battery.
• Do not allow metal objects (such as keys in your
pocket) to short circuit the battery contacts.
• Avoid exposure to excessive heat (>60°C or
140°F), moisture or caustic environments.
You should only use Philips authentic
battery and accessories, as the use of any
other accessories may damage your
phone and may be dangerous, and will
make all guarantees for your Philips phone
null and void. The use of an incorrect type of
battery may also cause an explosion.
Make sure damaged parts are replaced immediately
by a qualified technician and that they are replaced
with genuine Philips replacement parts.
PrecautionsDownload from Www.Somanuals.com. All Manuals Search And Download.
59
phone and also avoid using it with an ambient
temperature over 40°C.
Do not use your phone while driving
For your phone, the socket-outlet shall be installed
near the phone and shall be accessible.
Speaking on the telephone while driving
lowers your concentration, which can be
dangerous. Adhere to the following
guidelines:
Environmental care
• Give your full attention to driving. Pull off the
road and park before using the phone.
• Respect the local regulations in countries where
you drive and use your GSM phone.
• If you want to use your phone in a vehicle, install
the hands-free car kit which is designed for that
purpose.
• Ensure that your phone and car kit do not block
any air bags or other security devices fitted in
your car.
Remember to observe the local
regulations regarding the disposal of the
packaging materials, exhausted batteries
and old phone and please promote
recycling.
Philips has marked the battery and packaging with
standard symbols designed to promote the
recycling and appropriate disposal of your eventual
waste.
The use of an alarm system to operate a vehicle's
lights or horn to indicate incoming phone calls is
prohibited on public roads in some countries. Check
local regulations.
The labelled packaging material is
recyclable.
A financial contribution has been made
to the associated national packaging
recovery and recycling system.
EN60950 Norm
In case of hot weather or after a prolonged exposure
to the sun (e.g., behind a window or a windscreen),
the temperature of your phone's casing might
increase, especially when featuring a metallic finish.
Be very careful in this case when picking up your
The plastic material is recyclable (also
identifies the type of plastic).
60
Download from Www.Somanuals.com. All Manuals Search And Download.Precautions
against harmful interference in
a
residential
WEEE Marking in the DFU:
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
“Information to the Consumer”
Disposal of your old product
cause
harmful
interference
to
radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC
Please inform yourself about the local
separate collection system for
electrical and electronic products.
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. The correct disposal of your old
product will help prevent potential negative
consequences for the environment and human
health.
FCC Compliance Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
PrecautionsDownload from Www.Somanuals.com. All Manuals Search And Download.
61
Tips
How to prolong the battery life of your
phone
To have your mobile phone function properly,
sufficient battery power is important. For the
power-saving purpose, do the following, if
applicable:
1. Turn off the Bluetooth function of your phone.
2. Set the backlight level of your phone to a low
value. Or, turn on the light sensor.
3. Set the backlight duration of your phone to a
low value.
4. Turn on the auto keypad lock. When the
keypad is locked, your phone goes to the
power-saving mode.
5. Turn off the key sounds, tap vibration, or
vibration alerts.
6. Establish GPRS connection when needed.
Otherwise, your phone will keep searching for
GPRS connection, and drain your battery
power.
7. Turn off your phone if there is no coverage.
Otherwise, the phone will keep searching for
network, and drain your battery power.
62
Tips
Download from Www.Somanuals.com. All Manuals Search And Download.
Your battery seems to over heat
You might be using a charger that was not intended
for your phone. Make sure you always use the
Philips authentic accessory shipped with your
phone.
Troubleshooting
The phone does not switch on
Remove/reinstall the battery. Then charge the
phone until the battery icon stops scrolling. Unplug
the charger and try to switch on the phone.
Your phone doesn’t display the phone
numbers of incoming calls
Your phone doesn’t return to idle screen
Long press the hangup key or switch off the phone,
check that the SIM card and the battery are
installed correctly and switch it on again.
This feature is network and subscription
dependent. If the network doesn’t send the caller’s
number, the phone will display Call 1 or Withheld
instead. Contact your network operator for more
information.
The network symbol is not displayed
The network connection is lost. Either you are in a
radio shadow (in a tunnel or between tall buildings)
or you are outside the network coverage area. Try
from another place, try to reconnect to the network
(especially when abroad), check that the antenna is
in place if your mobile phone has an external
antenna, or contact your network operator for
assistance/information.
You can’t send text messages
Some networks don’t allow message exchanges
with other networks. First check that you have
entered the number of your SMS centre, or contact
your operator for more information.
You can’t display pictures
A picture may not be accepted by your mobile
phone if it is too large, if its name is too long, or if
it doesn’t have the correct file format.
The display doesn’t respond (or the
display responds slowly) to key presses
The display responds more slowly at very low
temperatures. This is normal and does not affect
the operation of the phone. Take the phone to a
warmer place and try again. In other cases, please
contact your phone supplier.
You have the feeling that you missed
some calls
Check your call divert options.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
The display shows INSERT SIM
Check that the SIM card has been inserted
correctly. If the problem remains, your SIM card
may be damaged. Contact your network operator.
When attempting to use a feature in the
menu, the mobile displays NOT
ALLOWED
Some features are network and subscription
dependent. They are only available, therefore, if the
network or your subscription supports them.
Contact your network operator for more
information.
Your phone is not charging
If your battery is completely flat, it might take a
while before the charging icon is displayed on the
screen.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
call in 5 or 10 seconds.
Philips Authentic
Accessories
Some accessories, such as battery and charger, are
included as standard accessories in your mobile
phone package. Additional accessories may also be
provided or sold separately. Package contents may
therefore vary.
When using the supplied one-key headset, press
the key to answer a call, and long press the key to
end the call.
USB cable
When connected to a computer through the USB
cable (compatible with most computers), your
phone can work as
To maximize the performance of your Philips
mobile phone and not to void the warranty,
always purchase Philips Authentic Accessories
that are specially designed for use with your
phone. Philips Consumer Electronics cannot be
held liable for any damage due to use with non-
authorised accessories.
Charger
Charges the battery on the phone.
Mass
Storage
Allows the data transfer between
PC and the phone, or the micro-SD
card inserted into the phone;
Allows the data management on the
phone, or micro-SD card through
your PC.
Charger
Charges your battery in any AC outlet. Small
enough to carry in a briefcase/handbag.
Webcam
Acts as a web camera on your PC.
Headset
Your phone will activate headset mode
automatically when you plug in the headset. If you
select On in Calls > Call options > Headset answer,
your phone will automatically answer the incoming
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Install MobilePhoneTools on your PC
1. Insert the supplied Data communication
software into the CD drive.
2. Run the autorun.exe program.
3. Make selections as prompted, and installation
starts automatically.
COM port
Allows you to back up phone data,
like phonebooks, on a computer or
recover the data from the
computer.
To do so, install the supplied Data
communication
(MobilePhoneTools)
software
on your
computer
communication
below).
(see
software"
"Data
Connect your Phone to the PC
1. Connect your phone to the PC using the
supplied USB cable or through the Bluetooth.
When using the USB cable for connection,
select COM port on your phone.
as
When the transfer is finished, please make sure
that you safely remove your device based on
the instruction of your computer.
The first time you connect your phone to the
PC, wait till the USB driver of your phone is
successfully installed.
Data communication software
2. On
your
PC,
double
click
the
MobilePhoneTools icon.
On the bottom left of the menu, “Philips X810
is connected” is displayed.
Data
communication
software
(MobilePhoneTools) offers instant sychronization
between your phone and your computer. You can
use the software for the data synchronization
between your phone and PC, like phonebook,
calendar, SMS messages, and audio/video/picture
files. With the software and GPRS service, you can
also connect your PC to the Internet through your
phone.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS and PHILIPS’ Shield
Emblem are registered
Trademark Declaration
trademarks of Koninklijke
Philips Electronics N.V.
manufactured by Shenzhen
Sang Fei Consumer
T9® is
Nuance Communications,
Inc.
a
trademark of
Tegic Euro. Pat.
App. 0842463
Communications Co., Ltd.
under
license
from
Koninklijke
Philips Electronics N.V.
Bluetooth™ is
mark owned
telefonaktiebolaget
Ericsson, Sweden
licensed to Philips.
a
trade-
by
L
M
and
JAVA is a trademark of Sun
Microsystems, Inc.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Specific Absorption Rate Information
International standards
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO
RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the
limits for exposure to radio frequency (RF) energy defined by the international standards. These
recommendations have been established by the International Commission on Non-Ionizing Radiation
Protection (ICNIRP) and, the Institute of Electrical and Electronics Engineers (IEEE) that forecast a substantial
safety margin for assuring the protection of all persons, regardless of age and health.
The exposure recommendations for mobile phones use a measurement unit known as the Specific
Absorption Rate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the
general public is 2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one
gram of tissue by IEEE Std 1528 for the head.
Tests for SAR have been conducted using recommended operating positions with the mobile phone
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined
at the highest certified power level, the actual SAR levels of the mobile phone while operating are generally
below the maximum SAR value. This is because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you are to a base station
antenna, the lower the power output.
While there may be differences between the SAR levels of various phones and at various positions, they all
meet the international protection standards for exposure to radio waves.
The highest SAR value for this Philips Xenium X810 model phone when tested for compliance against the
standard was 0.315 W/kg for ICNIRP recommendation and 0.858 W/kg for IEEE Std 1528.
For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to
use a headset. The purpose of those precautions is to take the mobile phone away from the head and the
body.
68
Download from Www.Somanuals.com. All ManSupalescSifeicarAcbhsAonrdptDioonwnRlaoated.Information
For body-worn operation, the cell phone meets FCC RF exposure guidelines provided that it is used with a
non-metallic accessory with the handset at least 1.5 cm from the body. Use of other accessories may not
ensure compliance with FCC RF exposure guidelines.
Specific AbsDoorpwtniolonadRfarotemInWfworwm.Saotmioannuals.com. All Manuals Search And Download.
69
3. What Will Philips Do if The Product is Not Free
From Material Defects in Materials and
Workmanship During The Limited Warranty
Period?
Limited warranty
1. What Does This Limited Warranty Cover?
Philips warrants to the original retail purchaser
(“Consumer” or “You”) that this Philips cellular
product and all accessories originally provided by
Philips in the sales package (“Product”) are free
from defects in materials, design and workmanship
under normal use in accordance with the operating
instructions and pursuant to the following terms
and conditions. This limited warranty extends only
to the Consumer for Products purchased and used
in the original country of purchase. The limited
warranty is valid only in Philips’ intended country of
sales of the product.
During the limited warranty period, Philips or its
authorized service representative will, at its option
either repair or replace, without charge for parts
or labour, a materially defective Product with new
or refurbished parts or Product and return such
repaired or replaced Product to the Consumer in
working condition. Philips will retain defective
parts, modules or equipment.
Repaired or replaced Product will be covered by
this limited warranty for the balance of the original
limited warranty period or ninety (90) days from
the date of repair or replacement whichever is
longer. Repair or replacement of Product, at
Philips’ option is your exclusive remedy.
2. How Long is The Limited Warranty Period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date of
purchase of the Product, documented by valid
proof of purchase. The limited warranty for original
Philips rechargeable battery extends for six (6)
months from the date of purchase.
4. What is Not Covered By This Limited Warranty?
This limited warranty does not cover:
70
Download from Www.Somanuals.com. All Manuals Search And Download.
a) Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation handling,
neglect, inundation, fire, water or other liquid
intrusion; or
5. How Do You Get Warranty Service?
a) Return the Product to an authorized
service center of Philips. You may contact
the local Philips office for the location of
the nearest authorized service center.
b) The SIM card must be removed from the
Product before it is given to Philips. Philips
assumes no liability for damaged or loss of
the SIM card or the data contained
therein.
c) If the Product failure is not covered by this
limited warranty, or this limited warranty
is inapplicable, void or invalid due to any
terms and conditions stated herein, the
Consumer will be charged for the cost of
repair or replacement of the Product and
all other related cost incurred in repairing
or replacing the Product.
b) Product that has been damaged due to
repair, alteration, or modification by
anyone not authorized by Philips; or
c) Product that has reception or operation
problems caused by signal conditions,
network reliability or cable or antenna
systems; or
d) Product defects or problems caused by
uses with non-Philips products or
accessories; or
e) Product which warranty/quality stickers,
product serial number or electronic serial
number has been removed, altered or
rendered illegible; or
f) Product purchased, used, serviced, or
shipped for repair from outside the
original country of purchase, or used for
commercial or institutional purposes
(including but not limited to Products used
for rental purposes); or
d) IMPORTANT - you are required to return
the Product together with a valid proof of
purchase which must identify the point of
purchase, date of purchase, Product
model and Product serial number clearly.
g) Product returned without valid proof of
purchase or which proof of purchase has
been altered or is illegible.
6. Other Limitation: This Warranty is The Entire
Agreement.
h) Normal wear and tear or Force Majeure.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
EXCEPT FOR THE EXPRESS WARRANTIES
SET FORTH ABOVE AND THOSE IMPLIED
BY LAW AND WHICH CANNOT BE
BUSINESS OPPORTUNITIES, COST OF
SUBSTITUTION OF GOODS OR SERVICES,
INVESTMENTS, DAMAGE TO GOODWILL
OR REPUTATION, OR LOSS OF DATA AND
CLAIMS BY THIRD PARTIES) RESULTING
FROM PURCHASE OR USE OF THE
PRODUCT, TO THE FULLEST EXTENT
ALLOWED BY LAW, WHETHER OR NOT
PHILIPS HAS BEEN ADVISED OF THE
POSSIBILTY OF SUCH DAMAGES. THESE
EXCLUDED
OR
MODIFIED
BY
AGREEMENT, PHILIPS PROVIDES NO
OTHER WARRANTY WHETHER EXPRESS
OR IMPLIED (WHETHER BY STATUTE,
UNDER THE OPERATION OF LAW OR
OTHERWISE) AND SPECIALLY DISCLAIMS
ANY WARRANTY OF SATISFACTORY
QUALITY MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
PHILIPS’ TOTAL LIABILITY FOR DAMAGES
RELATING TO OR ARISING OUT OF THE
PURCHASE OR USE OF THE PRODUCT,
REGARDLESS OF THE TYPE OR CAUSE OF
SUCH DAMAGE OR THE FORM OR
CHARACTERISATION OF THE CLAIM
ASSERTED (E.G. CONTRACT OR TOPIT),
SHALL NOT EXCEED THE ORIGINAL
PURCHASE PRICE PAID FOR THE
PRODUCT.
LIMITATIONS
SHALL
APPLY
NOTWITHSTANDING THE FAILURE OF
THE ESSENTIAL PURPOSE OF ANY LIMITED
REMEDY.
This limited warranty represents the complete
and exclusive agreement between the
Consumer and Philips with respect to this
cellular Product and it supercedes all prior
agreements between the parties, oral or
written, and all other communications
between the parties relating to the subject
matter of this limited warranty. No carrier,
retailer, agent, dealer, employee, thereof, or
employee of Philips is authorized to make
modifications to this limited warranty and you
should not rely on any such representation.
This limited warranty does not affect the
Consumer’s statutory rights under applicable
national laws in force.
HOWEVER IN NO EVENT SHALL PHILIPS BE
LIABLE FOR ANY PUNITIVE, SPECIAL,
INCIDENTAL,
INDIRECT
OR
CONSEQUENTIAL DAMAGES (INCLUDING
BUT NOT LIMITED TO THE LOSS OF USE,
LOSS
OF
TIME,
INCONVENIENCE,
COMMERIAL LOSS, LOST PROFITS, LOST
72
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECTRUM: EN 301 511 V9.0.2
EN 300 328 V1.7.1
Declaration of
conformity
We hereby declare that all essential radio test
suites have been carried out and that the above
named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to
in Article 10 and detailed in Annex V of Directive
1999/ 5/EC has been followed related to articles 3.1
and 3.2 with the involvement of the following No-
tified Body: CETECOM ICT Services GmbH, Un-
terturkheimer Strabe6-10, 66117, Saarbrucken,
Germany.
We,
Shenzhen Sang Fei Consumer
Communications Co., Ltd.
11 Science and Technology Road,
Shenzhen Hi-tech Industrial Park,
Nanshan District, Shenzhen 518057,
China.
declare under our sole responsibility that the
product
Xenium X810
Cellular Mobile Radio GSM/GPRS/EDGE 850/
900/1800/1900
Identification mark: 0682
March 18, 2009
TAC: 35992802
to which this declaration relates, is in conformity
with the following Standards:
SAFETY: EN 60950-1: 2006
HEALTH: EN50360: 2001;
EN62209-1: 2006
Quality Manager
EMC: EN 301 489-1 V 1.8.1;
EN 301 489-7 V 1.3.1;
EN 301 489-17 V1.3.2
Download from Www.Somanuals.com. All Manuals Search And Download.
|
