INSTALLATION ANd OPERATION INSTRUCTIONS
CONCESSIONAIRE PORTAbLE dISPENSERS
MODEL NOS.
DCꢀSeries
Table of Contents
IMPORTANT INFORMATION
Preparing the Cabinet for Use
To register your product, visit our web site at
“Service”. You will see the link to “Warranty
Registration Form”. You must complete and submit
this form or the installation date will revert back to
the ship Date.
Specifications........................................................2
List of Included Parts............................................3
Tools Required.......................................................3
Plumbing ...............................................................3
Electrical................................................................3
Installing Casters...................................................3
Tapping
This manual has been prepared to assist you in the
installation of your Concessionaire Dispenser and to
acquaint you with its operation and maintenance.
Connecting the Keg Coupler.................................4
Tapping the Keg ....................................................4
Connecting the Regulator .....................................5
Adjusting Gas Flow ...............................................5
CO2 Leak Test .......................................................5
Replacing a CO2 Gas Cylinder..............................5
Handling CO2 Gas.................................................5
Temperature
Beer Temperature..................................................6
Cleaning
Cleaning the Beer Lines........................................7
Cleaning the Cabinet.............................................7
General Information
We dedicate considerable time to ensure that our
products provide the highest level of customer
satisfaction. If service is required, your dealer can
provide you with a list of qualified service agents.
For your own protection, never return merchandise
for credit without our approval.
We thank you for selecting a Perlick product and
assure you of our continuing interest in your
satisfaction.
WARNING: When lifting, the full weight of the
cabinet must be supported. Lift from the cabinet
base and not from the top. Improper lifting can
result in severe damage to the cabinet.
How to Pour a Perfect Glass of Beer ...................8
Troubleshooting.....................................................9
Beer Facts.............................................................9
Replacement Parts........................................ 10-11
Wiring Diagram....................................................12
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069
Form No. Z2283
Rev. 06.14.10
Download from Www.Somanuals.com. All Manuals Search And Download.
PreparingꢀtheꢀCabinetꢀforꢀUseꢀ–ꢀConcessionaireꢀDispensers
Parts List
Plumbing
■
Connect drain tube from drainer into dump tank.
Faucet Standard.
■
■
■
■
■
■
Faucet Head Assembly
Caster Set.
Electrical
Black Connector Hose 3⁄16” x 3’.
The cabinet must be connected to a separately
fused power source (see electrical specification
plate) and grounded in accordance with National
and Local Electrical Codes. Caution: Do not
attempt to operate the equipment on any other
power source than that listed on the Electrical
Specification plate.
5⁄16” Air Hose.
Spanner Wrench.
Bag of Miscellaneous Parts.
Tools Required
■
#2 Phillips Screwdriver.
Spanner Wrench (included).
■
Installing the Faucet and
dispensing Head
■
#10 Crescent Wrench.
9/16” Allen Wrench.
■
3/8” Nut driver.
■
Before you begin: Wash dispensing head and fau-
cet. Flush beer, dispensing head and faucet lines
with fresh water.
■
Power driver.
Uncrating and Inspection
■
Apply RTV around the base of the dispensing
Remove all crating material before operating.
Carefully inspect cabinet for hidden damage. If
damage is discovered, file your claim immediately
with the transportation company. Perlick is
not responsible for damage in transit.
head to seal it to the top. Align the dispensing
head over the five holes on the cabinet top
and use the five stainless steel #10-32 x 13⁄4”
Phillips pan head stainless steel machine
screws to secure standard to cabinet top.
Wipe off excess RTV to complete the seal.
Attach faucet to standard using spanner
wrench to tighten coupling. Attach faucet
handle to faucet.
■
Installing Casters
IMPORTANT: Attach casters to the cabinet bot-
tom so that caster is centered over cabinet seam.
use supplied 1/4”- 20 xꢀ3/4” hex head self-tapping
machine screws.
■
Insert flexible plastic air hose six to seven
inches into bottom of faucet standard.
Secure hose with tie wrap (supplied).
CASTER MOUNTING
PLATE MUST
STRADDLE SEAM
CABINET
ACCESS
DRAIN TuBE
HOLE
FROM
DRAINER
DuMP TANK
CO2 TANK
ACCESS DOOR
COMPRESSOR
HOUSING
CHAIN FOR
SECuRING
CO2 TANK
SCREWS
REMOVABLE
DuMP TANK
DRY
CO2 TANK
(Must Be Secured
When Moving
Cabinet)
STORAGE
COMPARTMENT
CENTER CASTERS
REQUIRED ON DC4KP
(4 KEG CONCESSIONAIRE)
CASTER MOUNTING
PLATE MUST
STRADDLE SEAM
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
3
Download from Www.Somanuals.com. All Manuals Search And Download.
InstallationꢀandꢀTappingꢀ–ꢀConcessionaireꢀDispensers
Connecting the Keg Coupler
Tapping a Single Valve Keg (Sankey)
(when Supplied by Perlick)
■
Place one brown leather washer into black beer
line connector hose on hex nut side. Screw
connector to stainless steel beverage line on
faucet standard. Tighten with a wrench, but do
not over tighten.
Step 1
Single Valve Keg Coupler
■
Make sure lever handle on the keg coupler is in
the UP (untapped) position. Place one brown
leather washer into wing nut end of black beer
line connector hose and thread onto top of keg
coupler. Hand tighten.
OUT
Step 3
Step 2
DOWN
■
Place clamp on one end of red air line. Push
end over air valve located inside cabinet.
Tighten clamp with screwdriver. Turn shut-off
valve to OFF (horizontal) position.
1/4
TURN
■
Place clamp on the other end of red air line and
push over tailpiece on coupler. Tighten clamp
with screwdriver.
■
Be sure beer faucet is in closed position.
■
Align keg lugs with lug openings on bottom
CAUTION: do not use keg coupler as a
of coupler.
Turn clockwise 1⁄4 turn. Pull handle out and
handle to lift keg.
■
down. Keg is now tapped.
■
Open shut-off valve on air divider located inside
of the cabinet.
IMPORTANT: be sure to close this valve
when untapping keg.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
4
Download from Www.Somanuals.com. All Manuals Search And Download.
InstallationꢀandꢀTappingꢀ–ꢀConcessionaireꢀDispensers
Connecting the Regulator to the
Replacing CO2 Gas Cylinder
CO2 Cylinder
■
Turn CO2 hand valve clockwise until seated and
■
Remove blue plug from regulator fitting.
close shut-off valve on regulator.
■
(Note: Do not remove the carbonic washer).
Screw regulator onto gas cylinder valve.
unscrew regulator from cylinder fitting.
Replace carbonic washer (Part No. 157F2P),
■
■
Tighten with wrench until vertically straight.
Be sure that shut-off valve (black lever) on
regulator is in the OFF (horizontal) position.
Place a screw clamp over end of red air line
and push onto regulator tailpiece. Tighten
clamp with a screwdriver.
if needed and reattach regulator to filled
cylinder.
Turn CO2 hand valve counterclockwise until
fully open. Turn regulator shut-off valve to
open position.
■
■
■
Adjust CO2 gas flow as required, turning
clock wise for higher pressure.
REGULATOR
FITTING
HAND
VALVE
CO2
PRESSURE
GAUGE
Proper CO2 Handling
30
20
40
always...
PERLICK
50
60
10
PSI
■
Connect a regulator (reducing valve) to
0
CO2 cylinder.
■
Secure cylinder in upright position whether in
storage or in use.
Keep cylinder away from heat. Rupture disc
vents at 122° F. maximum.
■
CO2
GAS
DRUM
■
Ventilate room after high pressure gas leakage.
■
Check the last DOT test date on cylinder neck
FITTING FOR
RED AIR HOSE
before filling. If more than five years old, the
cylinder must be retested to DOT specifications.
REGULATOR
ADJUSTING
SCREW
■
Be sure CO2 cylinder outlet fitting is free of dust
or dirt before attaching regulator.
Store CO2 cylinder and regulator assembly
upright.
SHUT-OFF VALVE
(BLACK LEVER IN
CLOSED POSITION)
■
Adjusting the CO2 Gas Flow
■
Allow only properly trained and experienced
personnel to handle high pressure gas.
■
Turn regulator adjusting screw counterclock-
wise until it turns freely.
Turn hand valve counterclockwise on CO2
cylinder to the fully open position.
Turn regulator adjusting screw clockwise until
desired pressure is reached (approximately
12-15 lbs.). Tighten stop nut on adjusting screw.
Open shut-off valve on bottom of regulator.
■
■
never...
■
Connect cylinder directly to a keg without a
regulator (reducing valve).
■
Drop or throw regulator or CO2 cylinder.
Transport CO2 cylinder in a closed vehicle.
Apply oil to a regulator.
Shut off CO2 cylinder when not in use. You will
not save gas by doing so!
Allow untrained, inexperienced personnel to
handle high pressure gas.
■
■
■
■
CO2 Leak Test
Dilute a small amount of liquid dishwashing soap
and rub the soapy mixture around each connec-
tion. If bubbles appear, tighten connection.
■
Failure to heed this warning could result in
personal injury or death.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DraftꢀBeerꢀInformationꢀ–ꢀConcessionaireꢀDispensers
Temperature
At temperatures lower than 30° F., beer will freeze.
One of the most common causes of dispensing
problems is improper temperature. Draft beer
should be stored at a temperature between 32°
and 38°. At warmer temperatures, beer will foam.
When beer freezes, the alcohol in the beer may
separate and cause the beer to be cloudy with an
“off” taste.
Refrigeration and Temperature Control
Adjusting the Temperature
The Concessionaire’s are equipped with a heavy-
duty refrigeration system that is factory set to
maintain a product storage temperature of approxi-
mately 38° F.
The temperature control is inside the cabinet on
the right-hand side of the evaporator fan panel
assembly. You will need a screwdriver to turn the
adjusting screw. Make small adjustments until the
desired temperature is achieved.
■
Colder Temperatures:
Turn the adjusting screw clockwise (to the right).
Warmer Temperatures:
■
Turn the adjusting screw counterclockwise
(to the left).
The condenser fan motor turns off and on with the
condensing unit. The evaporator fan motor runs
continuously. The fan motors are lifetime lubricated
and will require no oiling.
NOTE:
Cabinet Temperatures lower than 34° will not allow
for proper defrosting of the evaporator coil. If
defrosting is necessary, turn the control knob to the
OFF position until coil is defrosted.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CleaningꢀtheꢀBeerꢀSystemꢀ–ꢀConcessionaireꢀDispensers
■
The entire beer system, to include the faucet, flexible
beer line and tapping devices must be cleaned at
regular intervals. We recommend flushing the entire
system with fresh water immediately after a keg has
been emptied. Once each month the system should
be cleaned chemically.
beer Stone:
All beer contains calcium which is present from
the grains used in the brewing process. it is an
important natural material in draft systems in
that as it oxidizes it coats the internal parts of
the beer lines and equipment. This thin coat of
beer stone helps prevent the beer from picking
up strong metallic or plastic flavors as it flows
through the system. The beer stone will
continue to build if the system is not cleaned
properly or regularly and can cause drawing
problems if it begins to flake off. Beer stone is
present if one can see a brownish color on the
faucet or inner wall of the beer line, or tobacco-
like flakes in the beer.
It is recommended that you purchase Perlick’s
Pump Type Cleaning Kit. It is equipped with an
adapter that attaches directly to the faucet shank,
jar with pump, cleaning solution, faucet brush and
spanner wrench.
Cleaning the draft beer system will help to
eliminate the buildup of the following materials:
■
bacteria:
Cleaning the Cabinet
Beer is an excellent food for bacteria (none of
which is harmful). Proper conditions may begin
the growth of bacteria in draft beer and on the
beer faucet. By regular cleaning, we prevent
this bacterial buildup and maintain the quality
of the draft beer. Greenish or yellowish colored
material on the faucet may indicate bacterial
growth.
use a mild detergent and water to clean the inside
and outside of the cabinet. Dry thoroughly. Never
use a scouring pad or abrasive cleanser.
NOTE: An industrial strength, commercial cleaner
can be used to clean the outside of painted
cabinets.
■
Yeast:
Cleaning the Condenser
All domestic draft beers contain a small amount
of yeast which remains in the beer from the
fermentation process. When the temperature of
draft beer exceeds 50° a process of secondary
fermentation may take place. The beer faucet
may exhibit a white colored substance (yeast
build up) if not cleaned on a regular basis.
use a long handled, stiff brush to clean the dirt
from the front surface of the condenser. Keeping
the condenser free from dust and dirt will ensure
efficient operation.
CAUTION: Do not bend the fins while brushing the
front of the condenser.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PouringꢀaꢀPerfectꢀGlassꢀofꢀBeerꢀ–ꢀConcessionaireꢀDispensers
STEP 1
Start with a clean glass.
Place the glass at a 45°
angle, one inch below
faucet. Do not let the
glass touch the faucet.
Open the faucet all the
way.
STEP 2
After the glass has
reached half full,
gradually bring the
glass to the upright
position
STEP 3
Let the remaining beer
run straight down the
middle of the glass.
This ensures proper
release of CO2 by
producing a 3⁄4”ꢀto 1”
foam head.
STEP 4
Close the faucet quickly
and completely.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
8
Rev. 06.14.10
Download from Www.Somanuals.com. All Manuals Search And Download.
TroubleꢀShootingꢀ–ꢀConcessionaireꢀDispensers
beer Service Problems
■ Cloudy beer:
Beer in glass appears hazy, not clear.
■
Wild beer:
Causes:
Dispensed beer has either too much foam or
is all foam.
■
Dirty glass.
Dirty faucet or beer line.
Frozen or nearly frozen beer.
Old beer.
Beer that has not been refrigerated for a
long period of time.
■
Causes:
■
■
Beer has been dispensed improperly.
■
Solution: See pouring instructions
■
on page 8.
Regulator pressure is set too high.
Warm keg temperature.
■
■
Solution: Keg must be colder than
40°. Target temperature is between
36° and 38° F.
Cabinet door is opened and closed
frequently and temperature is warmer
than 38° F.
Solution: Adjust temperature to between
36° and 38° F.
Kinks, dents or obstructions in the line.
using oddly shaped glasses. Frosted,
waxed or styrofoam containers may
cause foaming.
Dispenser has been turned off for a
long period of time.
Faucet is bad, dirty or in a worn condition.
beer and CO2 Facts
KEG
NO. OF NO. OF NO. OF
NO. OF FULL KEG
SIzE GALLONS Oz.
CASES
12Oz.
WEIGHT
■
SERVINGS
Quarter
Half
73⁄4
151⁄2
992
1,984
3.445
6.889
105
210
87 lbs.
161 lbs.
■
Beer foam is 25% liquid beer and 75% CO2
gas. Don’t waste it!
■
■
■
Most people prefer beer stored at 38° F.
Beer lines and faucets require regular cleaning
(see cleaning instructions on page 7).
A fully-charged 4.2 lb. CO2 cylinder will
dispense approximately 51⁄2 to 61⁄2 half barrels.
CO2 gas gives beer its sparkling effervescence.
It also gives beer its creamy head of foam.
■
■
■
■
■
■
Regulator malfunction.
■ Flat beer:
Foamy head disappears quickly; beer lacks
brewery fresh flavor.
Causes:
■
Dirty glassware.
CO2 pressure is too low, due to leak or
pressure setting.
CO2 is turned off at night.
Cooler is too cold.
CO2 leak or defective (sticking)
check valve.
■
■
■
■
■
Sluggish CO2 regulator.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ReplacementꢀPartsꢀ–ꢀConcessionaireꢀDispensers
MOdEL NOS.
dC72S
dC84S
dC96S
Condensing Units
Condensing unit 115 volt, 60 hz.
Condensing unit
Compressor
C22647
515301063
513200314
C22646
515301062
513200003
C22646
515301062
513200003
Fan motor assembly
Condenser coil
515315009
15352019
515315009
15352019
515315009
15352019
Terminal board
519100088
519100088
519100088
Overload protector
Relay
Capacitor
uS-PB10HBx1
uS-PB10HBx1
uS-PB10HBx1
uS-PB12HBx1
uS-PB12HBx1
uS-PB12HBx1
uS-PB12HBx1
uS-PB12HBx1
uS-PB12HBx1
Evaproator Assembly
Self Contained complete
Evaporator coil
65555-1
C17511-1EP
65084
65555-2
C17511-2EP
65085
65555-2
C17511-2EP
65085
Liquid & Suction line
Fan blade
Fan motor
Evaporator fan guard
Temperature control
Bulb clamp
57699
C15239A
65557
61283
C6634
57699
C15239A
65557
61283
C6634
57699
C15239A
65557
61283
C6634
Wire harness, compressor bottom
Wire harness, evaporator
Lock
65560
65561
63762
65560
65561
63762
65560
65561
36762
Space, lock
Lock rail
Grille rail
Condenser pan
Condenser end panel
Grille, black
63761-1
65432-24SS
65432-12SS
65565-1
66215-1SS
66210-12
66210-12SS
65435-12SS
65576-1L
65526-1
65500-1
65609-2
66237-4
66264L
63761-1
65432-24SS
65432-12SS
65565-1
66215-1SS
66210-12
66210-12SS
65435-12SS
65576-4L
65526-2
65500-1
65609-2
66237-4
66264L
63761-1
65432-24SS
65432-12SS
65565-1
66215-1SS
66210-12
66210-12SS
65435-12SS
65576-2L
65526-2
65500-1
65609-2
66237-4
66264L
Grille, SS
Condenser housing back
Evaporator, liquid & suction line cover
Evaporator pan
Door sill
Door handle
Door gasket
Cabinet hinge group left
Cabinet hinge group right
Hinge pin
*Replacement door
Waste tank
66264R
66264R
66264R
63679-1
RD-NL2
65559
63679-1
RD-NL2
65559
63679-1
RD-NL2
65559
Corner bumper
Air distributor assembly
Drainer insert
C31726
C18942
65510-1
66210-12C
C31726
C18943
65510-1
66210-12C
C31726
C18944
65510-1
66210-12C
Waste bin cover
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ReplacementꢀPartsꢀ–ꢀConcessionaireꢀDispensers
For Single Valve Keg Coupler (Series d)
14
4
ITEM
NO.
PART
NO.
3
2
dESCRIPTION
1.............32499...............Probe assembly
2............F40184..............Probe body
3..........31080-2P............Ball
1
4...........43641-1 .............Ball retainer
5..........31087-2P............Probe washer
6.............31089...............“O” Ring - 3-per assembly
7.............43061...............Body
15
13
6
8..........23682-2P............Check valve
9........... 157R2P..............Washer
10...........206B-1..............Tailpiece
8
9
10
11
11.............2026................Coupling nut
12.........31088-2P............Bottom seal washer
13..........31084-1 .............Retaining screw
14...........43002A..............Yoke assembly w/lock
15...........43001A..............Yoke assembly standard
16..........32474-1 .............Wrench
7
12
16
5
Micellaneous
CAPPED
NOT USED
PART
NO.
dESCRIPTION
157L2P...............Beer line connector gasket
57F2P.................CO2 tank washer
1392R.................Red air hose
529......................Beer hose
EVAPORATOR FAN
EVAPORATOR FAN
2928D.................Twin gauge CO2 regulator
BLACK
WHITE
WiringꢀDiagramꢀ–ꢀ
ConcessionaireꢀDispensers
THERMOSTAT
dC Series 2, 3 and 4 Keg
Concessionaire Portable dispensers
BLACK
POWER CONNECTION
CONDENSING UNIT
BLACK
WHITE
GREEN
JUNCTION BOX
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ReversingꢀDoorꢀHinge
STEP 8:
Tools Required
Re-assemble hinge brackets to unit. Bottom right bracket
is assembled as the top left bracket. Top right bracket is
assembled as the bottom left bracket.
■
#3 Phillips Screwdriver.
1/16” Allen Wrench.
■
■
Flathead Screwdriver
STEP 9:
Re-insert top hinge pin.
Right Hinged Door
(as shipped from factory)
STEP 10:
Re-assemble lock rail from
Handle Styles
Bottom Hinge Bracket Top Hinge Bracket
STEP #3
Operations to Perform on Door
Step #14
65305-1
C31409-1
STEP 11:
Not
Remove bottom
door hinge bracket
from door assem-
bly and remove
door hinge bushing
from bracket.
Reversible
65189
65609-2
Operations to Perform on Cabinet
Re-assemble door
hinge bracket to
previous position,
without bushing.
STEP 1:
Remove bottom hinge pin from
assembly.
STEP 12:
STEP 2:
Remove top door
hinge bracket from
door assembly and
Carefully lift and tilt out door
assembly from the unit and
set aside.
Step #12
Step #11
Step #13
assemble door
hinge bushing from
STEP 11 to bracket. Re-assemble door hinge bracket to
previous position with bushing attached.
STEP 3:
Remove lock rail from
cabinet, requires removal of
four screws.
STEP 13:
Door with full length SS handle:
There is no need to remove door handle. It will be
positioned correctly when door is reversed.
Remove
these screws
STEP 4:
Remove top hinge pin.
Remove top and bottom
hinge brackets from the unit.
Door with SS pull tab or handle with wrap-
around bracket:
Remove the two screws mounting the handle and
reposition to appropriate location on the opposite
side of the door.
STEP 5:
Remove hinge bushing from
Top Hinge Bracket Bottom Hinge Bracket
bottom hinge bracket and
assemble to top hinge bracket.
STEP 14:
Remove lock retainer and install on opposite end of door.
Hinge Bushing
STEP 6:
Taking care not to scratch the
surface, remove hole plugs from
the left hinge holes.
STEP 15:
What was the door top is now the door bottom. Carefully
lift the door onto the hinge brackets of the cabinet. The
two hinge bushings should meet. Reinsert the bottom
hinge pin to complete the door switching operation.
Step #7
STEP 7:
Insert hole plugs into vacant right
hinge holes.
Step #6
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2283
Rev. 06.14.10
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|