PLDVD199XM
OWNER’S MANUAL
Mobile Audio/Video System
•
•
•
Digital Audio Out-Coaxial
PLL Synthesizer Stereo Radio
DVD Player
•
Automatic Memory Storing
Full Detachable Panel
Preset Equalization
Multi-subtitle Languages Function
Multi-audio Languages Function
Multi-angle Function
•
•
•
•
•
•
•
•
Parental Control
Remote Control
XM Function
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
Installation .....................................................................................................6
Using the Detachable Front Panel .............................................................9
Wiring Connection ......................................................................................10
Location and Function of Keys..................................................................11
The Player ....................................................................................................11
Remote Control.............................................................................................12
Remote Control...........................................................................................14
Preparing the Remote Control......................................................................14
Loading/Ejecting a disc..............................................................................14
Loading a disc ..............................................................................................14
Ejecting a disc...............................................................................................14
Operation.....................................................................................................15
Basic Operation ............................................................................................15
Radio Operation............................................................................................16
XM Operation................................................................................................16
Disc (DVD/VCD/CD/MP3) Operation ............................................................17
AV IN Operation ............................................................................................22
Setup ...........................................................................................................23
Initial Setup ...................................................................................................23
General Setup...............................................................................................23
Speaker Setup ..............................................................................................25
Audio Setup ..................................................................................................25
Preferences Setup ........................................................................................26
Defaults Table ...............................................................................................29
Trouble Shooting.........................................................................................30
Specifications..............................................................................................31
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
CAUTION:
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC NOTES
Disc formats supported by this player
Note these scratches are not an
indication of any problem with the player.
DVD
12 cm disc
Label side up
Video CD
12 cm disc
Do not touch
the underside
of the disc
CD
12 cm disc
MP3
12 cm disc
Do not bend
Discs which cannot be played with this
player
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
• CD-G
Wipe the disc from center
toward the outside edge
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
• Do not warp discs.
• A disc should always be kept in its
case when not in use to prevent from
damaging.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Rough spots on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Ball point pen
or pencil
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Rough spots
on inside edge
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Notes:
DIN FRONT-MOUNT (Method A)
Installation Opening
• Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
This unit can be installed in any dashboard
having an opening as shown below:
• Before finally installing the unit,
connect the wiring temporarily and
make sure it is all connected up
properly and the unit and the system
work properly.
53 mm
182 mm
Installing the unit
• Use only the parts included with the
unit to ensure proper installation.
The use of unauthorized parts can
cause malfunctions.
Be sure you test all connections first, and
then follow these steps to install the unit.
1. Make sure the ignition is turned off,
and then disconnect the cable from
the vehicle battery's negative (-)
terminal.
• Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
2. Disconnect the wire harness and the
antenna.
3. Press the release button on the front
panel and remove the control panel
(see the steps of “removing the front
panel”).
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. The two supplied keys release tabs
inside the unit's sleeve so you can
remove it. Insert the keys as far as they
will go (with the notches facing up) into
the appropriate slots at the middle left
and right sides of the unit. Then slide
the sleeve off the back of the unit.
• Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
• If installation angle exceeds 30˚ from
horizontal, the unit might not give its
optimum performance.
30˚
• Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
Sleeve
L Key
Outer Trim Ring
Front Panel
DIN FRONT/REAR-MOUNT
R Key
This unit can be properly installed either
from “Front” (conventional DIN Front-
mount) or “Rear” (DIN Rear-mount
installation, utilizing threaded screw holes
at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
6. Mount the sleeve by inserting the sleeve
into the opening of the dashboard and
bend open the tabs located around the
sleeve with a screwdriver. Not all tabs
will be able to make contact, so
examine which ones will be most
effective. Bending open the appropriate
tabs behind the dashboard to secure
the sleeve in place.
Spring Washer
Hex Nut
Metal Strap
Mounting Bolt
Plain Washer
Tapping Screw
Dashboard
Tabs
10. Reconnect the cable to the vehicle
battery's negative (-) terminal. Then
replace the outer trim ring and install
the unit's front panel. (see the steps
of “installing the front panel”).
Screwdriver
Removing the unit
1. Make sure the ignition is turned off,
then disconnect the cable from the
vehicle battery's negative (-) terminal.
2. Remove the metal strap attached the
back of the unit (if attached).
3. Press the release button to remove the
front panel.
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. Insert both of the supplied keys into
the slots at the middle left and right
sides of the unit, then pull the unit out
of the dashboard.
Sleeve
7. Reconnect the wire harness and the
antenna and be careful not to pinch
any wires or cables.
8. Slide the unit into the sleeve until it
locks into place.
9. To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap
to the mounting bolt on the back of
the unit. If necessary, bend the metal
strap to fit your vehicle's mounting
area. Then use the supplied hardware
(Tapping Screw (5x25mm) and Plain
Washer) to attach the other end of
metal strap to a solid metal part of the
vehicle under the dashboard. This strap
also helps ensure proper electrical
grounding of the unit.
Note to install the short threading
terminal of the mounting bolt to the
back of the unit and the other long
threading terminal to the dashboard.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow
these mounting instructions.
Use the screw holes marked T (Toyota),
N (Nissan) located on both sides of the
unit to fasten the unit to the factory radio
mounting brackets supplied with your
vehicle.
Side view showing
Screw Holes marked
T, N
Factory Radio
Mounting
Bracket
Screw
Hook
Screw
Dashboard or
Console
To fasten the unit to the factory radio
mounting brackets.
1. Use a screwdriver to loose the hook's
screws on the front left and right sides
of the unit and remove the hooks.
2. Align the screw holes on the bracket
with the screw holes on the unit, and
then tighten the screws (5x5mm) on
each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE DETACHABLE FRONT PANEL
REMOVING THE FRONT PANEL
1. Press the release button on
the front panel and pull off the front
panel.
Precautions when handing
1. Do not drop the front panel.
2. Do not put pressure on the display or
control buttons when removing or
installing the front panel.
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. If any dirt or foreign substances
adhered on the contacts, they can be
removed with a clean and dry cloth.
5. Do not expose the front panel to high
temperatures or direct sunlight in
anywhere.
Release Button
Front Panel
6. Keep away any volatile agents (e.g.
benzene, thinner, or insecticides) from
touching the surface of the front panel.
7. Do not attempt to disassemble the
front panel.
2. Keep front panel into the case.
Protective Case
Front Panel
INSTALLING THE FRONT PANEL
To install the front panel, insert the panel
into the housing and make sure the panel
is properly installed. Otherwise,
abnormality occurs on the display or some
keys will not function properly.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING CONNECTION
XM AUDIO CABLE(BLACK)
AUDIO R IN (RED)
AUDIO L IN (WHITE)
AUDIO R IN (RED)
AUDIO L IN (WHITE)
VIDEO IN (YELLOW)
XM RECEIVER
CONNECTOR (BLACK)
AV IN CABLE (BLACK)
AV OUT CABLE (GRAY)
VIDEO OUT 1 (YELLOW)
VIDEO OUT 2 (YELLOW)
DIGITAL AUDIO (ORANGE)
ANTENNA
CONNECTOR
DC OUT (BLACK)
FUSE
GREEN BLACK YELLOW
RED
FRONT RCA CABLE(BROWN)
Rch
WHITE
Lch
RED
REAR RCA CABLE(GREY)
Rch
WHITE
Lch
SUBWOOFER CABLE (GREEN)
PINK
BLUE
RED
TELEPHONE
MUTE
POWER ANTENNA
IGNITION
SWITCH (ACC+)
MEMORY
BACK-UP(B+)
YELLOW
CHOKE
BOX
BLACK
GROUND (B-)
GREY
WHITE
FRONT Lch
SPEAKER
FRONT Rch
SPEAKER
WHITE/BLACK
GREEN
GREY/BLACK
VIOLET
REAR Lch
SPEAKER
REAR Rch
SPEAKER
GREEN/BLACK
VIOLET/BLACK
NOTE:
MUTE WHILE TELEPHONING
If your unit is connected to a mobile telephone through the telephone mute
line, the car radio’s volume will be muted as soon as you “pick up” the
telephone. “TEL MUTE” flashes in the display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION AND FUNCTION OF KEYS
THE PLAYER
12 7 11 10 24 15
8
5
6
13
4 17
3
9
2
20 21 22 14 18
23
19
1
16
1. PWR (power button)
2. DISP
3. EQ
14. 1~6 preset buttons
15. SMART-M
16. MANU/SKIP
17. MANU/SKIP
18. AMS
19. ST/ XM-MOD
20.
4.
5. Disc Slot
6. MOD(SW)
7.
8. Liquid Crystal Display
9. ENT/MUT
10. SEL
11. VOLUME
12. VOLUME
13. BND/MEN
21. SCN
22. RPT
23. SHF
24. RX
When remove the front panel:
26 25
25. LED
26. RESET button
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION AND FUNCTION OF KEYS
REMOTE CONTROL
27
5
24
1
3
32
8
2
6
4
7
25
9
28
10
31
30
26
29
15
12
11
13
23
18
19
17
16
14
20
22
21
12
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION AND FUNCTION OF KEYS
1.
POWER
Press POWER to turn the unit ON or OFF.
2. SMART
3. A-B
4. ANGLE
5.
In DVD mode, press it shortly to enter SMART MODE function.
A-B repeat allows a passage to be repeated continuously.
Changing of the view angle on multi-angle DVD disc.
Press to play/pause the disc.
6. MODE (SW) Changing between radio mode, disc (DVD/VCD/CD/MP3) play
mode, and AV IN mode.
Press it for several seconds to toggle sub-woofer output. Press it
for several seconds again to release this mode.
7. ZOOM
Allows the picture to be increased in size.
Press to mute the sound.
8. MUTE
9. SUBTITLE
Changing of the SUBTITLE language on multi-subtitle language
DVD disc.
10. SETUP
11. SEL
Display the SETUP menu.
Press to select the desired adjustment mode. Then press VOL+/-
to change settings.
12.
13. OK
14.
/
,
/
In case of menu mode,
/
,
/
buttons served as cursor buttons
to select item left/right, ahead/back.
Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on screen display.
Changing for slow playback motion (For VCD/DVD).
/
15. ST/XM-MOD Display the TITLE menu that is stored in DVD disc.
(TITLE)
In radio mode, press it shortly to select mono or stereo mode. Press
and hold it for a long time to select between local and distant
stations.
16.
17.
/
/
Press
to search forward rapidly &
for fast tuning.
press to skip back one track.
to
to search reverse rapidly.
In radio mode, press
/
Press
to skip to the next track &
In radio mode, press
to increase frequency or press
decrease frequency by one step of channel spacing.
When the clock flashing, use
/
to adjust the minutes or hours.
18. AUDIO
19. EQ
Press and hold the button for several seconds to change the AUDIO
soundtrack on multi-audio soundtrack DVD disc. Press the button
shortly to change the sound mode of the VCD discs.
Press it to select the equalization mode, such as FLAT, CLAS, POP,
ROCK.
20. 0-9
21. PBC
22. GOTO
Numeric buttons
Changing between PBC ON and PBC OFF on the VCD disc.
Disc search button, cooperatively used with numeric buttons.
23. VOLUME+/- Press VOLUME+/- button to increase or decrease the volume level.
24. DISPLAY
Display statistical disc information during playback.
Hold down the button until the clock flashes, then use
adjust the minutes or hours.
/
to
25. REPEAT
26. P/N
27. PROGRAM
28. SHUFFLE
29. RESUME
Switch the Repeat mode of discs.
Switch between PAL mode and NTSC mode.
Allows the track played in the order you programmed (For MP3/CD).
Allows the track played in random order (NOT for DVD).
When in stop mode, press the button, the play can be resumed
from the stop point.
30. AMS (STOP) In radio mode, press for several seconds to enter into automatic
memory storing function; press shortly to scan preset station. Press
it to stop disc playback.
31. BND (MENU) In DVD mode, display the root menu that is stored on the DVD disc
or return to disc menu on the VCD discs.
Changing between PBC ON and PBC OFF on the VCD disc.
In radio mode, press it to select desired band.
Press to eject the disc.
32. EJECT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new battery. Make sure
that the positive and negative
terminals of the battery are oriented
as indicated.
3. Close the cover.
Battery: a button cell lithium battery
(CR2025 3V)
Using the Remote Control
Point the remote control towards the
player front face remote sensor RX
(remote control signal receiver).
Operation angle: About 30 degree in
each the direction of the front of the
remote sensor.
LOADING/EJECTING A DISC
Loading a Disc
When all connections have completed,
you can load a disc as follow:
1. Turn the ignition on to the accessory
position.
2. Press the PWR button (1) on the front
panel or POWER button on the remote
control to turn on the unit.
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
2
3
1
Ejecting a Disc
Press (EJ) button (3) on the front panel
or (EJECT) button on remote control
to eject the disc.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
mute down the sound instantly. Press it
again to resume sound output.
BASIC OPERATION
SWITCHING ON/OFF THE UNIT
Press any button on the front panel (except
button and button) or POWER button
on the remote control to turn on the unit.
When the unit is on, press PWR button
on the front panel or POWER button on
the remote control to turn off the unit.
EQUALIZATION
Press EQ button on the front panel or on
the remote control shortly to turn on
equalization function and to select desired
audio mode. There are five kinds of mode
as below:
FLAT
CLAS
POP
ROCK
DSP OFF
FACEPLATE RELEASE
Press
button on the front panel to
detach the removable faceplate.
MODE SELECTION
Press MOD button on the front panel or
MODE button on the remote control to
select among radio, disc
(DVD/VCD/CD/MP3) play mode, and AV
IN mode.
SOUND ADJUSTMENT
Press SEL button on the front panel of
the unit or on the remote control to
select the desired adjustment mode.
The adjustment mode will change in the
following order:
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display of the front
panel.
VOL
BASS
TRE
MID
BAL
(Balance)
FAD
(Fader)
(Volume) (Bass) (Treble) (Middle)
By pressing the VOLUME /VOLUME
buttons on the front panel or VOLUME
+/- buttons on the remote control, it is
possible to adjust the desired sound
quality.
FLASHING LED
If the front panel does not install in the
main unit, the LED will be flashing.
REMOTE SENSOR
SUBWOOFER
Point the remote control handset to the
remote sensor RX. Press the function
keys on the handset to control the
system.
Press and hold MOD (SW) button on the
front panel or MODE (SW) button on the
remote control for several seconds to
toggle sub-woofer output. Press it for
several seconds again to release this
mode.
RESET FUNCTION
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The RESET button is
to be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button, the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
SET THE CLOCK
Press the DISP button on the front panel
or DISPLAY button on the remote control,
the clock is shown on the LCD display.
Then hold down the DISP button or
DISPLAY button until the clock flashes.
Then press CH/TUN/TRK
the front panel or button on the remote
control to change minutes; press
CH/TUN/TRK on the front panel or
button on the remote control to change
button on
hours.
MUTE
Press and hold ENT/MUT button on the
front panel for several secounds or press
MUTE button on the remote control to
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
RADIO OPERATION
strongest stations are stored into the
corresponding preset number button.
- Program scanning
Press AMS button shortly to scan preset
station.
SWITCHING TO RADIO MODE
Press MOD on the front panel or MODE
on the remote control to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
STATION STORING
Press any one of the preset buttons (1 to
6) on the front panel to select a station,
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the number
button.
SELECTING THE FREQUENCY BAND
During radio mode, shortly press
BND/MEN button on the front panel or
BAND (MENU) button on the remote
control to select the desired band. The
reception band will change in the following
order:
MONO/STEREO
Press ST/XM-MOD button on the front
panal or remote control shortly to select
mono or stereo mode. You can sometimes
improve reception of distant stations by
selecting mono operation.
FM1
FM2
FM3
AM1
AM2
SELECTING STATION
During radio mode, shortly press
CH/TUN/TRK button on the front
button on remote control to
SCAN
panel or
Press ENT/MUT button on the front panel
shortly to set the function to scan mode,
which scanning to higher frequency station
with receivable signal and keep on each
station for several seconds.
increase frequency by one step of channel
spacing, and shortly press CH/TUN/TRK
on the front panel or
remote control to decrease frequency by
one step of channel spacing. Hold
button on
CH/TUN/TRK
front panel longer or press
/
buttons on the
buttons
XM OPERATION
/
on the remote control for fast tuning. The
frequency is updated correspondingly on
display.
SWITCHING TO XM MODE
Shortly press MOD button to select XM
mode.
LOCAL/DISTANT
SELECTING USER-PRESET CHANNEL
In XM mode, the XM user-preset channel
group (3 channels) is toggled cyclically
through the group by quickly pressing the
BND/MEN button.
Press ST/XM-MOD button on the front
panal or remote control for several
seconds to select between local and
distant stations.
Local setting for reception of strong
station, and a distant setting for reception
of weaker stations. This function is effect
during AUTO SEEK operation.
The channel will change in the following
order:
XM1
XM2
XM3
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
SELECTING CHANNEL UP/DOWN
Press the CH/TUN/TRK button or
button to select the
CH/TUN/TRK
Press and hold AMS button on the
front panel or on the remote control for
several seconds, the radio searches
from the FM1 the initial frequency and
checks the signal strength until one
cycle search is finished. And then 6
channel up or down.
SEARCHING SCHANNEL
When the AMS button is shortly pressed,
the unit searches for each user preset
channel from XM1, XM2 to XM3. When
an available channel is detected, the
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
channel will be held at that preset number
and played about 5 seconds. After that,
it will search for another available channel.
2.Use CH/TUN/TRK
CH/TUN/TRK
button or
button to select
hundred digit.
3.Press ST/XM-MOD button again to
confirm entry of the hundred digit and
the 10s digit is flashing on/off.
4.Use CH/TUN/TRK
CH/TUN/TRK
digit.
5.Press ST/XM-MOD button again to
confirm entry of the 10s digit and the
10s digit is flashing on/off.
STORING PRESET CHANNELS
The preset buttons can be used to store
6 channels for convenient access to your
favorite channels.
- Programming channels
1.Select the desired channel you want to
store in memory.
2. Press and hold one of the preset buttons
for more than 2 seconds until the
corresponding preset button number
appears. Repeat steps 1 and 2 to
program additional channels.
- Quick tuning
button or
button to select 10s
6.Press ST/XM-MOD button again to
confirm entry of the 1s digit.
7.Press BND/MEN button to direct tune.
Press one of the six preset buttons
shortly to select a preset channel directly.
DISC (DVD/VCD/CD/MP3) OPERATION
STOPPING PLAY
XM MODE SELECTION
- Briefly press the button on the front
panel or AMS (STOP) button on the
remote control to stop the unit
Press ST/XM-MOD button to switch
CATEGORY mode, DIRECT TUNE mode,
or NORMAL mode. It is used as the
selection of each:
playback, when the
button is
pressed, normal playback will
continue.
Normal
Category mode
Direct Tune
When Category mode is engaged, the
“CATEGORY” function is turned on in the
display. When Category mode is released,
the “CATEGORY” function is turned off.
When Direct mode is engaged, “DIRECT”
of alphanumeric display is turned on.
Select category and tune UP/DOWN
within selected category
Use D.UP/CAT button or D.DN/CAT
button to select desire Category and press
BND/MEN button. In Category mode,
channels can be tuned within the same
category.
- Press button or AMS (STOP) button
twice to stop the playback and go
back to initial Track/Chapter.
RAPID FORWARD/RAPID REVERSE
Press
&
during play. Each time the
button is pressed, the speed of rapid
forward/reverse changes according to
the disc as follow:
FOR DVD/MP3:
Normal Playback
2X
4X
6X
8X
FOR VCD/CD:
Normal Playback
1X
2X
3X
4X
- When the user wishes to search by
Category, press ST/XM-MOD button
until it goes into Category search mode.
- Press M6 button or M5 button up and
down to get to the desired category.
- To change channels, press ST/XM-MOD
button again to Normal mode, and then
SKIPPING TRACK
Press CH/TUN/TRK
on the front panel or
/
buttons
buttons on
/
the remote control during playback.
Press
and
or
or
to skip to next track,
to back one track.
press CH/TUN/TRK
button or
CH/TUN/TRK button to select the
channel up or down.
How to direct tune
1.In direct mode, display shows DIRECT
and “000” channel number. (Hundred
Digit flashing on/off)
Note: For some VCD 2.0 dics
(PBC-playback control),
buttons may be unavailable.
/
or
/
SLOW MOTION PLAY
Press button on the remote control
/
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
during play.
REPEATING PLAYING A PASSAGE
A-B repeat allows a passage to be
repeated continuously. Press A-B button
on the remote control at the start of the
required passage, then press A-B button
again at the end of the passage. To revert
to normal playing, press A-B button
again. Each time the button is pressed,
the screen will display as follows:
Each timEach time the button is pressed,
the speed of slow changes according to
the according to the disc as follow.
FOR DVD:
Normal Playback
2X
4X
8X
FOR VCD:
Normal Playback
1X
2X
3X
A TO B SET A
A TO B SET B
A TO B CANCELLED
PAUSE PLAYING
Pressing on the remote control or on
the front panel during playback will stop
play temporary. To return to normal
TIME SEARCH (GOTO)
FOR DVD
Press GOTO button on the remote
control twice, the screen will display the
following message:
playback, press
once again.
TITLE 01/01 TIME -- : -- : --
00:00:25
REPEATING PLAYING
FOR DVD:
Press RPT button on the front panel or
REPEAT button on the remote control to
select repeat mode as follow:
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENT/MUT button
on the front panel or OK button on the
remote control.
FOR CD/VCD (WITH PBC OFF):
Press GOTO button once, the screen will
display the following message:
CHAPTER REPEAT ON
TITLE REPEAT ON
REPEAT OFF
FOR VCD/CD:
In stop mode, press RPT button or
REPEAT button to select repeat mode
as follow:
GOTO -- : --
00:00:25
REP-ONE
REP-ALL
REPEAT OFF
1. Continuously repeat at the current
chapter/track, when selected REP-
ONE mode.
2. Select REP-ALL mode to continuously
repeat all chapter/track on the current
disc.
3. When the player finishes playback of
the current disc last chapter/track, it
will stop and display the elapsed time.
When REPEAT OFF mode is selected,
REP-ONE & REP-ALL disappears
from screen display.
Use numeric buttons to input the time
directly.
ZOOM FUNCTION
Allows the picture to be increased in size.
Press ZOOM button on the remote
control to toggle among 1.5 scale, 2.0
scale and 3.0 scale.
When the scale is 3 times, press ZOOM
button again to cancel the zoom function.
1.5X
2.0X
3.0X
Cancelled
During Zoom mode, press
/
,
/
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
buttons to move pictures up, down, left
or right direction.
PBC FUNCTION
PLAYING IN RANDOM ORDER (ONLY
FOR VCD/CD/MP3)
Press SHF button on the front panel or
SHUFFLE button on the remote control,
track selection will be made in random
order. The display screen will show
While the VCD disc is playing, press
BND/MEN button on the DVD unit or
PBC button on the remote control to
change between PBC ON and PBC OFF
on the VCD disc.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
“SHUFFLE ON” on the screen. Then
press button to start SHUFFLE
playback. Press SHF button or
SHUFFLE button again in stop mode,
“SHUFFLE OFF” appears and release
the mode.
ON-SCREEN DISPLAY FUNCTION
Pressing the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example, how to display the contents of
the curreny disc.
PREVIEWING PLAYING (ONLY FOR
VCD/CD/MP3)
FOR DVD:
Press SCN button on the front panel to
play first several seconds of each track
on the current disc. Press again to stop
intro and listen to track.
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
PLAYING IN PROGRAMMED ORDER
For CD/VCD (WITH PBC OFF):
Press the stop button twice to ensure
that the player is in STOP mode. Then
press PROGRAM button, the screen will
display “PROGRAM P00:00”. For
example: press numeric button 4,
“PROGRAM P01:04” appears, it means
track 4 will be played first, then press
numeric button 6 and “PROGRAM
P02:06” appears. Press the different
numeric button to select the
corresponding track, and then press OK
button to confirm. If there isn’t any
operation, it will confirm the inputs
automatically after five seconds. Then
press button or OK button to exit
program mode and play tracks in
programmed order.
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
(2) Press DISPLAY for the second time:
TITLE REMAIN
01:46:58
(3) Press DISPLAY for the third time:
CHAPTER ELAPSED
00:00:24
When playing in programmed order,
press stop button twice, then press
PROGRAM button, and then press OK
button, it will play in normal order.
For MP3:
In stop mode, press PROGRAM button,
the screen will display “PROGRAM
P00:0000” and the program method is
the same as described above. If you
want to complete program setting, press
(Stop) button first then press button
to play tracks in programmed order. In
stop mode press PROGRAM button to
exit program mode and “PROGRAM
OFF” appears. If you set WITH MENU in
SMART NAV item in PREFERENCES
(4) Press DISPLAY for the fourth time:
CHAPTER REMAIN
00:01:39
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
FOR VCD:
(1) Press DISPLAY for the first time:
SINGLE ELAPSED
PAGE, you can use
/
,
/
buttons to
00:25
01/13
select PROGRAM PXXX mode or track
number and press OK button to confirm
it.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
(2) Press DISPLAY for the second time:
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35
SINGLE REMAIN
00:03:15 01/13
TRACK: 01/14
(3) Press DISPLAY for the third time:
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
TOTAL ELAPSED
00;00:25 01/13
FOR MP3:
(1) Press DISPLAY for the first time:
CHAPTERELASPED 00:00:25
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35 01/13
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
(2) Press DISPLAY for the second time:.
CHAPTERREMAIN 00:04:25
FOR CD:
(1) Press DISPLAY for the first time:
SINGLE ELASPED
00:00:25
(3) Press DISPLAY for the third time:
The message on the screen will be cleared.
TRACK: 01/14
MULTI-AUDIO LANGUAGE FUNCTION
(2) Press DISPLAY for the second time:
For DVD:
SINGLE REMAIN
00:03:15
Press AUDIO button on the remote
control for several seconds during
playback. Each time the button is
pressed, the audio soundtrack language
changes on sequential order.
Notes:
TRACK: 01/14
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
(3) Press DISPLAY for the third time:
TOTAL ELASPED
00:00:25
- When no different language
soundtrack are recorded,
displayed at screen left top corner.
will be
TRACK: 01/14
For VCD:
Press AUDIO button on the remote
control for several seconds during
playback. It is possible to switch the
sound between mono and stereo sound.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
MONO LEFT MONO RIGHT STEREO
SMART MODE FUNCTION
In DVD mode, press SMART-M button
on the DVD unit or SMART button on the
remote control shortly during disc
playback to activate SMART MODE
function and “SMART MODE” appears
on the display of the DVD unit. When
press MOD or MODE button to switch
to radio or AV IN mode, the front
speakers will output the corresponding
radio audio signal or audio signal of the
AV source, and the rear speakers will be
muted. In any mode (radio or AV IN), the
DVD disc is playing and the video out 1
and 2 jacks output the video signal of
DVD all the while.
When you press SMART-M button or
SMART button shortly during disc
playback to activate SMART MODE
function. In any mode, press and hold
SMART-M button or SMART button for
several seconds, “SMART MODE” will
be flashing. When you press MOD or
MODE button to switch to radio or AV IN
mode, the front speakers will output the
corresponding radio audio signal or
audio signal of the AV source, and the
rear speakers will be muted.
But when switch to AV IN mode, the
video out 1 and 2 jacks will not output
the video signal of DVD source any more.
In AV IN mode, these two jacks output
the video signal of AV IN source, there
isn’t any video signal to output from the
two video output jacks.
MENU FUNCTION
Press BND/MEN button on the DVD
unit or BND (MENU) button on the
remote control while the disc is playing
and the disc menu will be displayed. You
can navigate with the remote control
navigation keys and select a feature wih
the ENT/MUT button on the DVD unit
or OK button on the remote control.
TITLE MENU FUNCTION (FOR DVD ONLY)
If the DVD has multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
1. Press ST/XM-MOD button on the front
panel of the DVD unit or ST/XM-MOD
button on the remote control during
playback.
- The title menu is display.
2. Select preferred title by the cursor
buttons and confirm by ENT/MUT
button on the DVD unit or OK button
on the remote control.
MULTI-SUBTITLE LANGUAGES
FUNCTION (FOR DVD ONLY)
Press SUBTITLE during playback.
Each time the button is pressed, the subtitle
language changes in sequential order.
Notes:
-
-
-
The language number is different
according to the disc.
Some discs only contain one subtitle
language.
When no different subtitle language
When SMART MODE is activated, press
MOD or MODE button to switch to DVD
mode, press SMART-M button or
SMART button to release this function.
are recorded,
will be displayed at
screen left top corner.
MULTI-ANGLE FUNCTION (FOR
DVD ONLY)
Press ANGLE during playback.
Each time the button is pressed, the angle
changes in sequential order.
Notes:
SMART NAVIGATION IN MP3 DISC
PLAY
MP3 disc is playing as the format of
FOLDER.
-
The angle number is different
according to the disc.
The function only works for discs
having scenes recorded at different
angles.
When no different angle are recorded,
will be displayed at screen left top
corner.
-
-
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
For example:
AV IN OPERATION
When you connect another audio/video
system to the unit through the AV IN
terminals on the back of the unit, press
MOD button on the front panel or MODE
on the remote control to select AV IN
mode.
SMART NAVI
ROOT
CD01
MP3 001 PLUMT
MP3 002 RZID
MP3 003 ASCIS
MP3 004 DCYI
MP3 005 BFZ
CD02
CD03
CD04
CD05
DISC
In stop mode, use
/
,
/
on the
remote control to select the item or folder
(such as CD01, CD02...), and press
ENT/MUT button on DVD unit or OK
button on the remote control to confirm,
then select the desired track (such as
001 PLUMT, 002 RZID...) on the current
folder to play.
Pressing RPT button on the front panel
or REPEAT button on the remote control
repeatedly can select two kinds of repeat
play mode.
REP-ONE: Play the same song over and
again.
FOLDER REP: Play all songs in the
current directory in sequence, over and
again.
FOLDER: Play all songs in the current
directory once.
When PLAY MODE is selected, press /
to change between the following
mode:
SINGLE REP-ONE FOLDER FOLDER REP
DISC SCAN DISC
DISC REP
SHUFFLE ON PROGRAM PXXX
Pressing SHF on the front panel or
SHUFFLE button on the remote control
to play tracks in random order. Press
SHF button or SHUFFLE button again to
release the mode.
During playback, use or to skip an
item ahead or back.
: Rapid reverse,
: Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button pressed.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
INITIAL SETUP
GENERAL SETUP
SETUP MENU --- MAIN PAGE
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
NORMAL / PS
NORMAL / LB
WIDE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
PREFERENCES
EXIT SETUP
1.Press SETUP on the remote control
or on the DVD unit in the stop
mode.(Press the stop button twice to
ensure that the player is in STOP
mode.)
MAIN PAGE
TV Screen
4:3
Wide (16:9)
Video Material
Normal
Pan Scan
Letter-box
4:3
2.The initial SETUP menu is displayed.
3.Select the preferred item by using the
16:9
/
buttons.
4.Press ENT/MUT on the front panel or
OK button on the remote control.
TV display setup
This is to select the appropriate TV
aspect ratio (4:3 or 16:9) according to
the connected TV set.
a. GENERAL SETUP
This setup page includes all the
item of TV display & Audio output
feature. For details please refer to
GENERAL SETUP MENU.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
b. SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
d. PREFERENCES SETUP
This setup page includes all the
configuration of support feature.
For details please refer to
PREFERENCES SETUP MENU.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
AUTO
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
HI-RES
N-FLICKER
ENGLISH
FRENCH
GERMAN
ITALIAN
PORTUGUESE
SPANISH
MAIN PAGE
MAIN PAGE
PIC mode setup
OSD LANG type setup
Select the preferred OSD (On Screen
Display) language by using the
buttons.
Select AUTO, the player PIC mode will
depend on DVD disc.
/
Select HI-RES format for best image
resolution.
Select N-FLICKER format on image or
picture with noise or distortion.
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
ANGLE MARK
OSD LANG
CAPTIONS
ON
OFF
CAPTIONS
ON
SCR SAVER
OFF
SCR SAVER
MAIN PAGE
MAIN PAGE
CAPTIONS setup
When play DVD disc, activte the
ANGLE MARK display setup
If it is set to ON, when the multi-angle
CAPTIONS feature by selecting ON and
the captions (such as the actor dialogue)
appear on the screen; deactivate this
feature by selecting OFF and the
captions will not appear.
DVD disc is playing,
(the angle mark)
will appear on the screen; if it is set to
OFF, the mark will not appear.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- GENERAL PAGE ---
AUDIO SETUP
--- AUDIO SETUP ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
SPDIF
OFF
ON
OP MODE
LPCM OUTPUT
DYNAMIC
ON
OFF
MAIN PAGE
MAIN PAGE
SPDIF
This is to activate the digital audio output
on or off.
SCR SAVER setup
Select the SCR SAVER ON/OFF.
SPEAKER SETUP
--- SPEAKER SETUP PAGE ---
--- AUDIO SETUP ---
SPDIF
DOWNMIX
LT/RT
STEREO
OP MODE
LINE OUT
MAIN PAGE
LPCM OUTPUT
DYNAMIC
RF REMOD
MAIN PAGE
OP MODE
- LINE OUT: Line out mode, with digital
dialog normalization.
- RF REMOD: RF remodulation mode,
with heavy compression and digital
dialog normalization.
It is recommended to select LINE OUT
mode.
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
- Select the LT/RT to activate the Dolby
surround compatible output.
- Select the STEREO to activate simple
stereo mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
SPDIF
--- PREFERENCES PAGE ---
OP MODE
TV TYPE
AUTO
NTSC
PAL
AUDIO
LPCM OUTPUT
DYNAMIC
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
LPCM 48K
LPCM 96K
MAIN PAGE
MAIN PAGE
LPCM OUTPUT
Selecting LPCM (Line Pause Code
Modulation) OUTPUT between LPCM
48K and LPCM 96K.
The higher the sampling frequency is, the
better the output audio quality is. It is
recommended to select LPCM 96K.
TV type setup
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
Select PAL format, when you connected
to PAL TV.
Select AUTO format, the player TV output
format will be according to the DVD disc
format.
--- AUDIO SETUP ---
SPDIF
FULL
6/8
OP MODE
--- PREFERENCES PAGE ---
TV TYPE
LPCM OUTPUT
DYNAMIC
4/8
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
2/8
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
OFF
MAIN PAGE
DYNAMIC RANGE CONTROL
Select DYNAMIC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between full
compression and off compression.
PORTUGUESE
MAIN PAGE
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
1 G
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
AUDIO
2
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO PARENTAL
PORTUGUESE
OFF
MAIN PAGE
MAIN PAGE
SUBTITLE language setup
Select the preferred SUBTITLE language
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and confirmed by
pressing ENT button on the DVD unit or
OK button on the remote control.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
CHANGE
MAIN PAGE
MAIN PAGE
PORTUGUESE
PASSWORD
DISC MENU language setup
Select CHANGE and press ENT or OK
button. Type the old password (The initial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
Select the preferred DISC MENU
language by using the cursor buttons.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
AUDIO
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
RESET
DEFAULTS
SMART NAV
LOGO
ORIG LOGO
CUST LOGO
MAIN PAGE
MAIN PAGE
DEFAULTS
LOGO
Select reset to revert to factory initial
settings.
Select ORIG LOGO (original picture when
the unit turns on) or CUSTLOGO
(customer-set picture when the unit turns
on).
--- PREFERENCES PAGE ---
Note: The CUST LOGO must be in the
JPEG format. Load the picture disc into
the drive of the DVD unit, when you
select the desired picture, press
button then press TITLE button, the
current picture will be stored in the unit
and “LOGO IS COPIED” will appear on
the screen.
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
NO MENU
WITH MENU
MAIN PAGE
SMART NAV
If selected WITH MENU mode, when
playing an MP3 disc, the smart
navigation menu will appear on the
screen, then the user can select a track
to play according to the menu hint.
If selected NO MENU mode, when
playing an MP3 disc, there is no menu to
display and it starts to play directly.
The user can adjust this item according
to one’s need.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
DEFAULTS TABLE
General Setup TV Display
PIC Mode
Normal/LB
AUTO
Angle Mark ON
OSD Language English
Captions ON
SCR Saver ON
Stereo
Speaker Setup Downmix
Audio Setup SPDIF
OP Mode
Dynamic
OFF
Line Out
FULL
LPCM Output LPCM 96K
Preferences TV Type
AUTO
Audio
English
English
Subtitle
DISC Menu English
Parental
NO Parental
3308
Password
Smart NAV With Menu
Logo ORIG Logo
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
DISTORTED SOUND FROM HIFI
AMPLIFIER
• Check to make sure that no audio
connections are made to the amplifier
phono input.
Under no circumstances should you
try to repair the player yourself, as
this will invalidate the warranty. Only
qualified service personnel can
remove the cover or service this
player.
THE PLAYER DOES NOT RESPOND
TO THE REMOTE CONTROL
• Aim the remote control directly at the
sensor on the front of the player.
• Avoid all obstacles which may interfere
with the signal path.
NO POWER
• If the power supply is connected to the
car accessory circuits, but the engine
is not moving, switch the ignition key
to “ACC”.
• Check if the fuse is blown. Then replace
the new fuse.
• Inspect or replace the remote control
battery.
DISTORTED OR B/W PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
• Check if the on/off button on the front
of the player is set to on.
NO AUDIO AT DIGITAL OUTPUT
• Check the digital connections
• Check the Digital Audio menu to make
sure that the digital output is correctly
set.
NO PICTURE
• Check if the monitor or TV is switched
on.
• Check if select proper mode, such as
Disc Play mode and AV mode.
• Check the video connection.
• Check if the audio format of the selected
audio language matches your receiver’s
capabilities.
DISTORTED PICTURE
BUTTONS DO NOT WORK
• Press Reset button on the housing of
the DVD unit.
• Check the disc for fingerprints and clean
with soft cloth, wiping from centre to
edge.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
THE RADIO DOES NOT WORK
• Check if the antenna cable is connected
firmly.
THE RADIO STATION AUTOMATIC
SELECTION DOES NOT WORK
• If the signals are too weak, select a
station manually.
COMPLETELY DISTORTED PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
NO COLOR IN PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
DISC DOES NOT PLAY
• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by
trying another disc.
NO SOUND
• Check audio connections.
• If using a HIFI amplifier, try another
sound source.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL
Power Supply Requirements
Chassis Dimensions
Tone Controls
: DC 12 Volts, Negative Ground
: 178 (W) x 160 (D) x 50 (H)
- Bass (at 100 Hz)
- Treble (at 10 KHz)
Maximum Output Power
Current Drain
:
:
10 dB
10 dB
: 4 x 40 watts
: 15 Ampere (max.)
DVD PLAYER
Signal to Noise Ratio
Channel Separation
Frequency Response
: More than 55 dB
: More than 45 dB
: 20 Hz - 20 kHz
RADIO
FM
Frequency Coverage
IF
Sensitivity (S/N = 30 dB)
Stereo Separation
: 87.5 to 107.9 MHz
: 10.7 MHz
: 4 µV
: > 25 dB
AM
Frequency Coverage
IF
Sensitivity (S/N = 20 dB)
: 530 to 1710 KHz
: 450 KHz
: 36 dBu
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Supply voltage:
Discs played:
Compositive video 1.0Vp-p 75Ω
(1) 5” (12 cm) DVD-VIDEO disc
(2) Compact disc (CD-DA/CD-R/CD-RW/MP3)
(3) 5” (12 cm) VIDEO CD
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
CAUTION:
• To avoid electric shock, this unit must not be exposed to dripping water or water
splash.
• Minimum distances around the apparatus for sufficient ventilation.
• The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• The use of apparatus in tropical and/or moderate climates.
• Before scrapping the appliance, remove the batteries and place them in the
appropriate battery collection container.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
88-V1005-
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|