About Oregon Scientific ...........................................7
EU-Declaration of Conformity ..................................7
FCC Statement...........................................................8
Declaration of Conformity........................................8
Solar Clock with Indoor / Outdoor
Temperature
Model:RMR802 / RMR802A
USER MANUAL
CONTENTS
Overview .....................................................................2
Front View ..............................................................2
Back View ..............................................................2
Remote Sensor .......................................................3
Getting Started ...........................................................3
Solar Panel..............................................................3
Insert Batteries........................................................3
Remote Sensor...........................................................3
Sensor Data Transmission......................................4
Clock ...........................................................................4
Clock Reception......................................................4
Manually Set Clock .................................................5
Temperature ...............................................................5
Ice Warning.............................................................6
Reset...........................................................................6
Precautions................................................................6
Specifications ............................................................7
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1. RESET: Reset unit to default settings
INSERT BATTERIES
2. EU / UK: Select the nearest radio signal (RMR802
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
only)
3. °C / °F: Select temperature unit
REMOTE SENSOR
MEANING
LOCATION
Clock / alarm
Main unit batteries low
Sensor batteries low
2
Outdoor temperature
1
4
5
REMOTE SENSOR
3
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment.
2. Insert the battery, matching the polarities.
3. Select a channel then press RESET.
4. Close the battery door.
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
5. CHANNEL switch
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 1.5 m (5 ft) and which can shield it from direct
sunlight or wet conditions for an accurate reading.
GETTING STARTED
SOLAR PANEL
The solar panel is an energy saving feature, which is an
environmentally friendly way to provide additional power
to the main unit and prolongs battery life. However, it
cannot replace battery power entirely.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The sensor reception icon in the remote sensor area
shows the status:
ICON
DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be
found.
1.5 m (5 ft)
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal.
SENSOR DATA TRANSMISSION
To search for a sensor:
RMR802:
Press and hold + MODE.
Slide EU / UK to select the signal received.
•
EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
•
UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
RMR802A:
WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
To enable / disable signal reception:
RMR802: Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
•
RMR802A: Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
Press and hold
reception.
to enable or
to disable signal
NOTE The language options are English (E), German
(D), French (F), Italian (I), Spanish (S) and Russian
(R).
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.If
signal reception is unsuccessful, place your unit next
To select display mode:
to a window, press and hold
search.
to force another signal
Press MODE to choose between clock with seconds,
clock with weekday or calendar.
Clock signal reception indicator:
TEMPERATURE
STRONG
SIGNAL
WEAK / NO
SIGNAL
To toggle temperature unit:
Press °C / °F.
To toggle between each outdoor sensor’s readings:
Press repeatedly.
OR
MANUALLY SET CLOCK
Press and hold + MEM for 2 seconds to initiate auto
toggle of outdoor channels.
To set the clock manually, disable the signal reception
first.
To end press
.
1. Press and hold MODE.
To toggle between current, minimum and maximum
records:
2. Press
or
to change the settings.
3. Press MODE to confirm.
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
4. The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (day – month /
month – day), month, day and language.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.
ICE WARNING
If the sensor falls between 3°C to -2 °C (37°F to 28°F),
the green LED indicator will flash, and will stop flashing
once the temperature is out of this range.
Placement of this product on certain types of
wood may result in damage to its finish for which
Oregon Scientific will not be responsible. Consult
the furniture manufacturer’s care instructions for
information.
NOTE As ice alert is only applicable to channel 1,
to prevent flashing of LED, select channel 2 or 3 on
outdoor sensor.
•
•
The contents of this manual may not be reproduced
without the permission of the manufacturer.
RESET
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
Press RESET to return to the default settings.
PRECAUTIONS
•
Please note that some units are equipped with
a battery safety strip. Remove the strip from the
battery compartment before first use.
•
•
•
•
•
•
•
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
materials.
NOTE Features and accessories will not be available
in all countries. For more information, please contact
your local retailer.
Do not tamper with the unit’s internal components.
This invalidates the warranty.
Only use fresh batteries. Do not mix new and old
batteries.
Images shown in this manual may differ from the
actual display.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
ABOUT OREGON SCIENTIFIC
more about Oregon Scientific products.
TYPE
DESCRIPTION
MAIN UNIT
If you’re in the US and would like to contact our
Customer Care department directly, please visit: www2.
oregonscientific.com/service/support
75 x 33 x 120 mm
(2.95 x 1.30 x 4.72 in)
L x W x H
Weight
112 g (3.95 oz)
without battery
For international inquiries, please visit: www2.
oregonscientific.com/about/international
-5°C to 50°C
(23°F to 122°F)
Temperature range
Signal frequency
Power
EU-DECLARATION OF CONFORMITY
433 MHz
Hereby, Oregon Scientific, declares that this Solar
Clock with Indoor / Outdoor Temperature (Model:
RMR802 / RMR802A) is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC. A copy of the signed and dated Declaration
of Conformity is available on request via our Oregon
Scientific Customer Service.
2 x UM-4 (AAA) 1.5 V
batteries
REMOTE UNIT (THN132N)
96 x 50 x 22 mm
(3.78 x 1.97 x 0.87 in)
L x W x H
Weight
62g (2.22 ounces)
Transmission range
30m (98 ft) unobstructed
-20°C to 60°C
(-4°F to 140°F)
Temperature range
Power
1 x UM-3 (AA) 1.5 V
batteries
COUNTRIES RTTE APPROVAL COMPLIED
All EC countries,Switzerland CH
and Norway
N
7
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Consult the dealer or an experienced radio / TV
technician for help.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
DECLARATION OF CONFORMITY
The following information is not to be used as contact
for support or sales. Please visit our website at www2.
oregonscientific.com/service for all enquiries.
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
We
Name:
Oregon Scientific, Inc.
19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
Address:
NOTE This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
Telephone No.: 1-800-853-8883
declare that the product
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
Product No.:
RMR802 / RMR802A
Product Name: Solar Clock with Indoor / Outdoor
Temperature
Manufacturer:
Address:
IDT Technology Limited
Block C, 9/F, Kaiser Estate,Phase 1,41
Man Yue St., Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference
that may cause undesired operation.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2009 Oregon Scientific. All rights reserved.
P/N: 300102249-00001-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Solar Clock with Indoor / Outdoor Temperature
Model:RMR802 / RMR802A
USER MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|