• About The Pressure Change Graph .................... 11
• Pressure History Display ...................................... 11
• Notes On Barometer Functions ........................... 11
General Operation Of Time And Date Functions 12
• Time And Date ..................................................... 13
• Daily Alarm ........................................................... 13
• Deactivating The Alarm ........................................ 14
• Count-Up Timer ................................................... 14
• Temperature Display ............................................ 14
Resetting The Unit ................................................ 14
Maintenance .......................................................... 15
Specifications........................................................ 15
About Oregon Scientific ....................................... 17
Altimeter / Barometer
with
Weather Forecasts and Clock /
Calendar
Model: EB833
User’s Manual
TABLE OF CONTENTS
Introduction ............................................................. 2
Description Of Parts ............................................... 2
Installing And Replacing Batteries........................ 3
General Operation Of The Altimeter...................... 4
• Altitude Calibration ................................................. 6
• Units Of Measurement For Altitude ........................ 6
• About The Altitude Change Graph ......................... 6
• Altitude History Display .......................................... 7
• About Altitude Change Memory ............................. 7
• Clearing Altitude Memory, Max / Min Altitude
Memory, And Vertical Ascent / Decent Memory .... 7
• The Altitude Alarm ................................................. 8
• Altitude Sampling Rate .......................................... 8
• Notes On Altimeter Functions ................................ 9
General Operation Of Barometer And Weather
Forecast Functions ................................................. 9
• Barometric Pressure Calibration .......................... 10
• Units Of Measurement For Barometric Pressure . 10
1
EB833(EN3)
1
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
[BARO] Barometer Button
- Alternates between Barometric displays
TIME Button
Hand Grips
Ž
√
”
•
- Rubberized grips that prevent the unit from being
accidentally dropped
- Alternates between Time displays
[+ -] Button
Wall-Mount Bracket
- to mount unit to wall or vertical surfice
- Changes the value of a setting
- Clears memories
- Activates / deactivates alarm
- Selects units of measure
- Switches from fast to slow sampling rate
Battery Compartment
INSTALLING AND REPLACING OF
BATTERY
The EB833 operates with 2 (two) CR-2032 Lithium
batteries that are included with all new units. During
initial packaging, the batteries were insulated with a red
tape so as to maximize the shelf life of the product.
Before use, remove the insulation tape by gently pulling.
≈
- Houses 2 (two) CR-2032 batteries
- RESET Button
Sensor Vents
∆
≥
- Openings for atmospheric sensitive sensors
Neck Cord
Upon removal, the display will show a full-segment
display for 3 seconds; it will then enter the Normal
Altitude Display.
- Facilitates carrying around the neck or attached to
a rucksack or belt
FULL SEGMENT DISPLAY
3
EB833(EN3)
3
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow these steps to install or replace batteries:
1. Open battery cover located at the back of the unit by
removing screws.
GENERAL OPERATION OF THE ALTIMETER
Subsequently, the unit can be set to show changes in
altitude and maximum / minimum elevations. It can store
altitude-related data and display elevation trends over a
12-hour period of time. The unit can also display the net
total of accumulative ascents.
In Altimeter Mode, by detecting changes in air pressure,
the EB833 determines
a
given altitude level.
2. Insert 2 (two) new CR-2032 Lithium batteries.
A small
icon indicates that the unit is in Altimeter
Mode and that the displays are altitude related.
To view display sequences in Altimeter Mode:
1. Press [ALT] to move between various Altimeter
Mode displays.
3. Replace the battery cover.
Normal Altitude Display
A battery-low indicator [ BATT ] will show on the display
The first display in Altimeter Mode.
when the batteries require changing.
NOTE If the unit is being used for the first time, it will
automatically enter the Normal Altimeter Display.
Display shows:
Itisrecommendedthatwhentheuserisstationaryatone
elevation, that the unit is placed in Barometer Mode. The
Altimeter Mode may shorten battery life. Stored altitude
relateddataisnotaffectedbyhavingtheunitinBarometer
Mode for extended periods of time.
CURRENT
ALTITUDE
ICON
ALTITUDE
CURRENT
TIME
ALTITUDE
TREND
NOTE Disposed of improperly, batteries can be
harmful. Protect the environment by taking
exhausted batteries to authorized disposal
stations.
GRAPH
CURRENT
TEMPERATURE
NORMAL ALTITUDE DISPLAY
4
EB833(EN3)
4
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press [ALT] again, Altitude History Display.
2. Press [ALT] to view the Altitude Max Memory
Display show:
Display.
Display shows:
CURRENT ALTITUDE
ALTITUDE CHANGE
INDICATOR
CORRESPONDING
ALTITUDE LEVEL AT
THE INDICATED
TIME
CHANGE IN
ALTITUDE
ACCUMULATIVE
VERTICAL
MAXIMUM
ALTITUDE
REACHED
ONE HOUR
ASCENT ICON
PREVIOUS*
ALTITUDE HISTORY DISPLAY
THE
ACCUMULATIVE
VERTICAL
* Previous altitude levels can be displayed for up to
12-hours.Press[+]or[-]todisplaypreviousaltitude
levels at one-hour intervals for the past 12-hours.
ALTITUDE MAX MEMORY
DISPLAY
ASCENT MEMORY
5. Press[ALT]againtoviewtheAltitudeAlarmDisplay.
Display shows:
3. Press [ALT] again, to view the Altitude Min Memory
ALARM DISPLAY
INDICATOR
Display.
Display shows:
ALARM ON/OFF
INDICATOR
ALTITUDE LEVEL
WHERE THE ALARM
WILL ACTIVATE
CHANGE IN
ALTITUDE
ACCUMULATIVE
VERTICAL
CURRENT
CURRENT
TIME
TEMPERATURE
DECENT ICON
MINIMUM
ALTITUDE
REACHED
ALTITUDE ALARM DISPLAY
ACCUMULATIVE
VERTICAL
DECENT
ALTITUDE MIN MEMORY
DISPLAY
6. Press [ALT] again, the unit will return to the Normal
MEMORY
Altitude display.
5
EB833(EN3)
5
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
UNITS OF MEASUREMENT FOR ALTITUDE
ALTITUDE CALIBRATION
Altitude measurements can be displayed in feet (ft) or
meters (m).
If the altitude on the display is different from the actual
current altitude, the unit can be manually calibrated to
reflect the true altitude level.
To change the altitude units of measure:
1. In Normal Altitude Display.
To calibrate the altitude:
2. Simultaneously, press and hold the [+] and [-] to
select between meters or feet.
1. In Normal Altitude Display.
2. Press and hold [ALT] and [TIME] simultaneously for
about2seconds. TheCALHxindicatorshowsonthe
display and the current altitude digits start flashing.
3. Press [+] or [-] to adjust the altitude reading by 1
meter. For rapid acceleration of measurement
adjustments, press and hold.
ABOUT THE ALTITUDE CHANGE GRAPH
InNormalAltitudeDisplay,theEB833graphicallydisplay
altitude levels at 2-hour time intervals for the past 12
hours. Each vertical bar on the altitude graph represents
a 2-hour time period. Each horizontal line represents
pressure changes equal to + /- 200m.
4. Press [ALT] to confirm and return to the Altitude
Display.
Example:
Point C: A point where the altitude, as indicated by a
marking stone or post, is 1500m. At this point
set the current altitude to 1500m.
( 2 HOURS PER COLUMN )
NOTE The unit will return to Normal Altimeter Display if
no buttons are pressed for one-minute during the
calibration sequence.
The Altitude Change Graph is viewed in all the Altimeter
Mode displays.
6
EB833(EN3)
6
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Point B: Atthispoint,checktheAltitudeChangeMemory.
The unit will display the net vertical difference
between point A and point B.
ALTITUDE HISTORY DISPLAY
In addition to having altitude information displayed as a
graph,altitudehistorycanalsobedisplayednumerically.
To numerically display previous altitude levels:
1. Enter the Altitude History Display
CLEARING ALTITUDE MEMORY, MAX / MIN
ALTITUDE MEMORY, AND VERTICAL
ASCENT / DECENT MEMORY
2. Press [+] or [-] to display the corresponding altitude
history for a specified time period up to –12 hours.
Altituderelatedmemoriesareclearedsequentially.During
the sequence, correct information can be bypassed by
pressing [ALT].
ABOUT ALTITUDE CHANGE MEMORY
The EB833 can monitors the change in altitude between
two points. The unit displays the net vertical difference
between points of a descent / ascent. Upon clearing the
altitude memory, the current altitude reading is used as
a base from which the unit starts recording changes.
NOTE To clear the maximum altitude reached memory,
first enter MAX Altitude Display. Alternately, enter MIN
Altitude Display to clear the minimum altitude reached
memory.
To clear Altitude Mode Memories:
Point A: Atthispoint, resettheAltitudeChangeMemory
to 0 m./ ft. The EB833 will immediately start
recording new changes in altitude.
1. Enter Altitude Max (or Altitude Min) Display.
2. Press and hold [ALT] for about 2 seconds, the
change-in-altitude digits flash.
NOTE To bypass any section without making changes
to the memory, press [ALT].
3. Press [+] or [-], the change-in-altitude digits will reset
to 0 m./ft.
4. Press [ALT], and proceed to the maximum (or
minimum) height reached memory. The subsequent
maximum (or minimum) altitude digits flash.
7
EB833(EN3)
7
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press [+] or [-], the memory resets to the current
actual altitude.
activate at the specified elevation.
7. Press [ALT] again and the Altimeter exits the setting
sequence. If the alarm is set to activate at a specified
6. Press[ALT],andproceedtotheaccumulative vertical
ascent
/
decent memory. The subsequent
altitude, the
will be displayed.
accumulative vertical ascent / decent digits flash.
7. Press [+] or [-], the vertical ascent / decent memory
resets to 0 m. / ft.
NOTE The unit will return to the Altimeter Display if no
buttons are pressed for 2 minutes.
The altitude alarm setting ranges is between –500m and
8. Press [ALT] a last time and the unit returns to the
Altitude Max (or Min) Memory Display.
7000m.
NOTETheEB833willreturntoAltitudeMax/MinMemory
Display if no buttons are pressed for 1 minute.
ALTITUDE SAMPLING RATE
The EB833 automatically samples altitude level at a rate
of 2 seconds or 15 minutes.
THE ALTITUDE ALARM
The Altitude Alarm can be set to activate when a specific
altitude is reached.
When detecting a significant change in altitude, the unit
will automatically increase the Altitude Sampling Rate to
2-second intervals.
To set the altitude alarm:
1
Enter Altitude Alarm Display.
2. Press and hold [ALT] for above 2 seconds. The
When maintained at the same elevation for 10 minutes
or longer, the device will automatically decrease the rate
at which altitude samples are taken.
indicator will display.
3. Press the [+] and [-] to increase / decrease the
altitude reading. Press and hold for 100-meter
acceleration increments.
To manually force a change in the frequency at
which altitude samples are taken:
4. Press [ALT]
1. In Normal Altimeter Display.
5. Press [+] or [-] to deactivate the alarm (the
2. Press and hold (+) for about 2 seconds. The Altitude
Sampling Rate will increase to 2-second intervals.
3. Press and hold (-) for about 2 seconds. The Altitude
Sampling Rate will decrease to 15-minute intervals.
indicator disappears) or [+] or [-] to activate the alarm
(
indicator appears).
6. Press[ALT],theALTALARM indicatorstopsflashing.
The
indicator will appear and the alarm will
8
EB833(EN3)
8
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON THE ALTIMETER FUNCTIONS
BAROMETER AND WEATHER FORECAST
FUNCTIONS
Altitudereadingsmaybeaffectedbyairpressurechange.
Sudden changes in pressure, temperature and weather
may cause an inaccurate altitude reading.
InBarometricMode,bydetectingchangesinairpressure,
this unit makes weather predictions. Illustrated weather
forecasts symbols indicate forecasts as sunny, slightly
cloudy, cloudy, and rainy.
The unit cannot distinguish between change of air
pressure caused by a weather change or by an altitude
change. However, accurate functioning of the unit can
be maintained by following a few simple steps.
LCD
DISPLAYS
ON THE
UNIT
To ensure that accurate altitude readings are
maintained:
RAINY
SUNNY
SLIGHTLY CLOUDY
CLOUDY
FORECAST
-
-
-
At the start of a journey, switch the unit to the
AltimeterDisplayMode.Thelastbarometricpressure
willremainstoreduntiltheunitisswitchedbacktothe
Barometer Display Mode.
Displayedforecastsymbolsareintendedindicateweather
forecasts for the coming 12 to 24 hours. The radius of the
forecast is approximately 30 to 50 km.
When a journey is completed, or if the unit is
maintainedatthesamealtitudeforextendedperiods,
itisrecommendedtoswitchtotheBarometerDisplay
Mode.
Asmall
iconindicatesthattheunitisinBarometric
Mode and that the displays are barometer related.
NOTE
If a journey is particularly long or extended over a
long distance of varying altitudes, occasionally
compare the unit’s displayed altitude against known
actual altitudes. If necessary, manually calibrate the
altitude to maintain correct altitude readings.
1. The accuracy of weather forecasts, when only using
atmospheric pressure trends, are approximately 70
to 75 percent.
2. The weather forecasts from this unit are predictions
that cover the next 12 to 24 hours. It may not
necessarily reflect the current situation.
3. The "Sunny" icon, as applies to nighttime, implies
clear weather.
GENERAL OPERATION OF THE
9
EB833(EN3)
9
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
To View Different Displays in Barometric Mode:
* Previous barometric levels can be displayed for up
to 12 hours. Press [+} or [-] to display previous
barometric levels at one hour intervals for the past
12 hours.
1. Press[BARO]tomovebetweenbarometricfunctions.
Normal Barometric Display
The first display in Barometric Display Mode.
3. Press [BARO] again, to return to the Normal
Barometer Display.
NOTE TheunitwillautomaticallyenterNormalBarometric
Display when first entering the Barometric Mode.
Display shows:
BAROMETRIC CALIBRATIONS
BARO ICON
CURRENT
At sea level or near a reliable source like a weather
station, the barometer can be calibrated.
PRESSURE
PRESSURE
CHANGE
TREND
To calibrate the barometric function:
1. Enter Normal Barometric Display.
WEATHER
FORECAST
GRAPH
INDICATORS
2. Simultaneously press and hold [BARO] and [TIME]
for about 2 seconds. The “CAL Po” will be displayed
and the current barometric digits will flash.
3. Press [+] or [-] to adjust barometric readings.
4. Press [BARO] to return to the Barometric Display
Mode.
CURRENT
CURRENT
TIME
TEMPERATURE
NORMAL BAROMETRIC DISPLAY
2. Press [BARO] again to view the Barometric
Pressure History Display
Display shows:
UNITS OF MEASURE FOR BAROMETRIC
PRESSURE
CORRESPONDING
BAROMETRIC
PRESSURE
Barometric units of measurement can be displayed as
mb, hpa, and inHg.
LEVEL AT THE
ONE HOUR
PREVIOUS*
INDICATED TIME
To change the units of measurement:
1. Enter the Normal Barometric Display.
BAROMETRIC HISTORY DISPLAY
10
EB833(EN3)
10
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Simultaneously press and hold [+] and [-] for about 2
seconds.
PRESSURE HISTORY DISPLAY
Barometric pressure readings can also be displayed
numerically.
3. Simultaneously press again until the desired units
have been selected.
Tonumericallydisplaypreviousbarometricpressure
levels:
ABOUT THE PRESSURE CHANGE GRAPH
1. Enter Barometric History Display.
2. Press[+]or[-]todisplaythecorrespondingbarometric
pressure for the specified time period.
The EB833 can display barometric pressure levels at
intervals for the past 12 hours. Each vertical bar on the
PressureChangeGraphrepresentsa2-hourtimeperiod.
Each horizontal line represents pressure change equal
to + / - 2 mb/hPa.
NOTES ON THE BAROMETER FUNCTIONS
Barometer readings may be affected by a change in
altitude.
The unit cannot distinguish between a change in air
pressure caused by weather patterns or by a change in
altitude. However, accurate functioning of the unit can
be maintained by following a few simple steps.
( 2 HOURS PER COLUMN )
To ensure that accurate barometric readings are
maintained:
An upward or downward direction of the vertical bars
may illustrate a changing pressure trend. Subsequently,
this may indicate changes in weather conditions.
However, as stated previously, caution needs to be
taken when attempting to predict weather forecasts.
When the unit is stationed at the same elevation for
extended periods, it is advised to keep the unit in
Barometer Mode.
In addition to maximizing the weather forecasting
capabilities the unit requires less power to function.
Subsequently battery life may be extended.
11
EB833(EN3)
11
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press [TIME] to view the Current Date / Month
GENERAL OPERATION OF THE TIME AND
DATE FUNCTIONS
Display.
Display shows:
The EB833 has a Time and Date Mode. This mode also
includes a count-up timer and daily wakeup alarm.
CURRENT DATE / MONTH
CURRENT
The Time and Date Mode only affects the third line of the
LCD.
TEMPERATURE
DATE MONTH DISPLAY
To View Different Time and Date Mode displays:
1. EnterNormalAltimeterDisplayorNormalBarometer
Display to view current time.
3. Press [TIME] again to view the Alarm Time Display
Normal Time Display
Display shows:
The first display in Time and Date Mode.
ALARM TIME
NOTE
CURRENT
-
-
Normal Time Display is the third line of either the
NormalAltitudeDisplayorNormalBarometerDisplay.
Only the third line of the LCD will change in Time
Date Mode.
TEMPERATURE
ALARM TIME DISPLAY
Display shows:
4. Press [TIME] again to view the Timer Display
Display shows:
CURRENT TIME
COUNT-UP TIME
CURRENT
CURRENT
TEMPERATURE
TEMPERATURE
NORMAL TIME DISPLAY
TIMER DISPLAY
12
EB833(EN3)
12
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Press [TIME] again, minute digits start flashing.
13. Press [+] or [-] to increase / decrease the minute
digits.
NOTE The unit will return to Normal Barometer Display
orAltitudeDisplayifnobuttonsarepressedfor1minutes
during setting sequence.
TIME AND DATE
The current time and date can be set sequentially.
To Set the Current Date and Time:
1. Enter Normal Altitude Display or Normal Barometer
Display.
14. Pressing [TIME] a last time to exit.
2. Press and hold [TIME] for 2 seconds, the EU or US
indicator starts flashing.
DAILY ALARM
The EB833 has a daily alarm that can be programmed to
activate at the same time each day.
To Set the Alarm Time:
1. Enter Alarm Time Display
3. Press [+] or [-] to select US for US format shown as
month / date or EU for European format shown as
date / month.
2. Press and hold [TIME] for 2 seconds, the [ ] icon
will be displayed and the [ALARM] indicator and the
hour digits start flashing.
4. Press [TIME] again, the current month flashes.
5. Press [+] or [-] to increase / decrease the month
digits. For rapid acceleration of the digits, press and
hold.
6. Press [TIME] again, the current date flashes.
7. Press [+] or [-] to increase / decrease the date digit.
8. Press [TIME] again, the 12-hour or 24-hour indicator
starts flashing.
9. Press [+] or [-] to select between 12-hour or 24-hour
time format.
3. Press [+] or [-] to increase / decrease the hour digits.
4. Press [TIME] again, the minute digits flash.
10. Press [TIME] again, the hour digit starts flashing.
11. Press [+] or [-] to increase / decrease the hour digit.
5. Press[+]or[-]toincrease/decreasetheminutedigit.
13
EB833(EN3)
13
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press [TIME] again to set and activate / deactivated
the alarm.
4. To reset the timer to 0, press [+] to stop the timer and
then press [-].
7. Press [+] or [-] to select between activation and
deactivation. The alarm icon will only appear when
the alarm is set.
TEMPERATURE DISPLAY
8. Pressing [TIME] a last time to exit. The ALARM
indicator stops flashing.
The current temperature is displayed in all three display
modes. The temperature can be displayed as Celsius
(°C) and Fahrenheit (°F).
NOTE If no buttons are pressed for 2 minutes during
setting sequence, the unit will return to Alarm Time
Display.
To select the units of measure for the temperature
display:
1. Enter Date/Month Mode.
2. Press and hold [+] or [-] for about 2 seconds to
DEACTIVATING THE ALARM
change the units of measure.
When the alarm time is reached the alarm will sound for
1 minute.
RESETTING THE UNIT
To stop the alarm:
Located inside the battery compartment is a RESET
Button. Using a blunt object such as a paper clip, press
RESET to return all settings to the factory values.
Pressing any button can stop the alarm sound.
COUNT-UP TIMER
The button is required only when the unit is not operating
in a favorable way, such as in the rare case of a
malfunction.
The unit comes with a count-up timer and can count up
to 99 hours 59 minutes and 59 seconds.
To start, stop, and reset the timer:
NOTE After resetting the unit all memories and data will
1. Enter Timer Display.
be cleared.
2. Press [+] the timer starts counting.
3. Press [+] again, the timer stops. To start the timer
again without clearing the elapsed time, press [+].
14
EB833(EN3)
14
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
SPECIFICATIONS
When handled properly, this unit is engineered to
give you years of satisfactory service. Here are a few
product care instructions:
Operating Temperature
Range
-10°C to 60°C
(-14°F to 140°F)
Altimeter Functions
1. Do not immerse the unit in water. If the unit comes in
contact with water, dry it immediately with a soft lint-
free cloth.
Range
-500 m to +7000 m
Resolution
1 m / 1 ft
2. Do not clean the unit with abrasive or corrosive
materials. Abrasive cleaning agents may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock,
dust, temperature, or humidity. Such treatment may
result in malfunction, a shorter electronic life span,
damaged batteries, or distorted parts.
Sampling rate
2 sec (normal mode)15min
(sleep mode: same level for
more than 15 min.)
Range
60,957 m / 199,999 ft
4. Do not tamper with the unit’s internal components.
Doing so will terminate the unit’s warranty and may
causedamage.Theunitcontainsnouser-serviceable
parts.
Units of measure
m or ft
Barometer Functions
Range
400 mb/hPa to 1070 mb/
5. Onlyusenewbatteriesasspecifiedinthisinstruction
manual. Do not mix new and old batteries as the old
batteries may leak.
hPa
Resolution
1mb/hPa (0.03inHg)
Sampling rate
15 minutes
Units of measure
mb/hpa or inHg
Thermometer Functions
Range
-40°C to 70°C
(-40°F to 158°F)
15
EB833(EN3)
15
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution
0.1°C (0.2°F)
10 seconds
°C or °F
CAUTION
Sampling rate
Units of measure
-
-
-
The content of this manual is subject to change
without further notice.
Due to printing limitations, the displays shown
in this manual may differ from the actual
displays.
Calendar Clock Functions
Calendar
Date/month (European
format) or month/Date
(US format)
The manufacturer and its suppliers hold no
responsibilities to you or any other person for
any damages expenses, lost profits, or any
other damages arise by using this Altimeter.
The contents of this manual may not be
reproduced without the permission of the
manufacturer.
Clock time
12-hour AM /PM format or
24-hours format
-
Time resolution
1 second
Timer Functions
Range
counts up to 99 hours,
59 minutes, 59 seconds
Resolution
1 second
16
EB833(EN3)
16
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT OREGON SCIENTIFIC
more about Oregon Scientific products such as digital
cameras; MP3 players; children's electronic learning
productsandgames;projectionclocks;healthandfitness
gear; weather stations; and digital and conference
phones. The website also includes contact information
for our customer care department in case you need to
reach us, as well as frequently asked questions and
customer downloads.
We hope you will find all the information you need on our
website, however if you'd like to contact the Oregon
Scientific Customer Care department directly, please
visit: www2.oregonscientific.com/service/support
OR
Call 949-608-2848 in the US.
For international enquiries, please visit:
default.asp
17
EB833(EN3)
17
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2004 Oregon Scientific. All rights reserved.
P/N: 086-001667-234
18
EB833(EN3)
18
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Altimeter / Barometer
With
Weather Forecasts And Clock / Calendar
Model: EB833
User Manual
19
EB833(EN3)
19
8/31/04, 3:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|