Table of contents
Table of Contents...................................................................................1
Usage Notice..........................................................................................3
Eye Safety Warnings.....................................................................................6
Introduction.............................................................................................7
Main Unit................................................................................................................8
Connection Ports ...................................................................................................9
Remote Control....................................................................................................10
Installation............................................................................................11
Connecting the Projector.............................................................................11
Connect to Notebook ...........................................................................................11
Connect to Video Sources ...................................................................................12
Powering On the Projector...................................................................................13
Powering Off the Projector...................................................................................14
Warning Indicator.................................................................................................14
Adjusting the Projected Image.....................................................................15
Adjusting the Projector's Height...........................................................................15
Adjusting Projection Image Size ..........................................................................16
User Controls .......................................................................................17
On-screen Display Menus...........................................................................19
How to operate ....................................................................................................19
Menu Tree...................................................................................................20
Image...................................................................................................................21
Image | Advanced................................................................................................23
Display .................................................................................................................24
System.................................................................................................................26
System | Lamp Settings.......................................................................................28
System | Startup Image .......................................................................................29
System | Network.................................................................................................30
Setup....................................................................................................................34
Appendicess.........................................................................................38
Image...................................................................................................................38
Other.................................................................................................................... 39
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Notice
Safety Information
The lightning flash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of
the projector and to protect from over heating, it is recommended to
install the projector in a location that does not block ventilation. As an
example, do not place the projector on a crowded coffee table, sofa,
bed, etc. Do not put the projector in an enclosure such as a book case
or a cabinet that restricts air flow.
2. Do not use the projector near water or moisture. To reduce the risk of
fire and/or electric shock, do not expose the projector to rain or
moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or
any other apparatus such as amplifiers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specified by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
▀■ Unit has been dropped.
▀■ Power supply cord or plug has been damaged.
▀■ Liquid has been spilled on to the projector.
▀■ Projector has been exposed to rain or moisture.
▀■ Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch
dangerous voltage points and short out parts that could result in fire or
electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Notice
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
Do not look into the projector's lens when the
lamp is on. The bright light may hurt your
eyes.
▀■ Warning-
To reduce the risk of fire or electric shock, do
not expose this projector to rain or moisture.
▀■ Warning-
▀■ Warning-
▀■ Warning-
Please do not open or disassemble the
projector as this may cause electric shock.
When replacing the lamp, please allow the
unit to cool down. Follow instructions as
described on page 42.
This projector will detect the life of the lamp
itself. Please be sure to change the lamp
when it shows warning messages.
▀■ Warning-
▀■ Warning-
Reset the "Lamp Reset" function from the
on-screen display "System|Lamp Setting"
menu after replacing the lamp module
(refer to page 28).
When switching the projector off, please
ensure the cooling cycle has been completed
before disconnecting power. Allow 90 seconds
for the projector to cool down.
▀■ Warning-
Noottee
Do not use lens cap when projector is in
operation.
▀■ Warning-
▀■ Warning-
When the lamp reaches
the end of its life, the
projector will not turn
back on until the lamp
module has been
replaced. To replace
the lamp, follow the
procedures listed under
"Replacing the Lamp"
section on page 42.
When the lamp is approaching to the end of its
life time, the message "Replacement
suggested" will show on the screen.
Please contact your local reseller or service
center to change the lamp as soon as
possible.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Notice
Do:
▀■ Turn off and unplug the power plug from the AC outlet before
cleaning the product.
▀■ Use a soft dry cloth with mild detergent to clean the display
housing.
▀■ Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Do not:
▀■ Block the slots and openings on the unit provided for
ventilation.
▀■ Use abrasive cleaners, waxes or solvents to clean the unit.
▀■ Use under the following conditions:
- In extremely hot, cold or humid environments.
Ensure that the ambient room temperature is
within 5 - 35°C
Relative Humidity is 5 - 35°C, 80% (Max.),
non-condensing
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Notice
Eye Safety Warnings
▀■ Avoid staring/facing directly into the projector beam at all
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
▀■ In order to minimize the lamp power, use room blinds to
reduce ambient light levels.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Package Overview
Unpack and inspect the box contents to ensure all
parts listed below are in the box. If something is
missing, please contact Optoma customer service.
Projector with lens cap
Power Cord 1.8m
15 pin D-sub VGA Cable
Noottee
Due to different
applications in each
Country, some regions
may have different
accessories.
Remote Control
2 x AAA Batteries
Carrying Case
Documentation :
User's Manual
Warranty Card
Quick Start Guide
WEEE Card
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Product Overview
Main Unit
4
5
6
7
8
9
1
2
3
10
11
1. Tilt-Adjustment Button
2. Tilt-Adjustment Feet
3. Lens Cap
4. LED Indicators
5. Power Button
6. Function Keys
7. Zoom
8. Focus
9. IR Receiver
10. Lens
11. Connection Ports
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Connection Ports
1
2
3
4
5
6
7
8
9
10
11
18
17
16
15 14 13
12
1. Power Socket
2. USB Connector (Connect to PC for Remote Mouse function)
3. Component Video
4. S-Video
5. Composite Video
6. VGA Output
7. VGA Input
8. HDMI 1
9. HDMI 2
10. 12V OUT
11. Kensington MicrosaverTM Lock Port
12. Speaker
13. IR Receiver
14. AUDIO IN (L and R)
15. AUDIO IN
16. RS232
17. AUDIO OUT
18. LAN
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Remote Control
1
15
16
1. Laser
2. Status LED
3. Power
4. Up
2
3
5. Left
6. Enter
7. L
17
18
4
5
6
8. Source/Left Key
9. Enter
10. Keystone +/-
11. DVI-D/YPbPr/1
12. HDMI/4
13. S-Video/7
14. Menu/2
19
20
7
8
21
22
15. IR transmitter
16. Laser
9
17. Right
10
23
24
25
26
27
28
18. Down
11
12
13
19. R
20. p / Page Up
21. Re-Sync/Right Key
22. Volume +/-
23. q / Page Down
24. ZOOM/3
25. AV mute/6
26. Video/9
27. Freeze/5
28. VGA/8
14
Noottee
DVI-D function is
model dependent.
ꢇ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the Projector
Connect to Notebook
VGA, DVI, HDMI
1
2
3
4
Noottee
Due to the difference
in applications for each
country, some regions
may have different
accessories.
HDMI
1
HDMI
2
12V OUT
USB
Pr
Pb
Y
S-VIDEO
VIDEO
VGA OUT
VGA
/
SCART YPbPr
/
AUDIO OUT
AUDIO IN
L-AUDIO IN-R
IR
RS-232
E62405SP
R
6
5
1.................................................................Audio Cable (Optional Accessory)
2............................................................................................VGA Input Cable
3..........................................................DVI/HDMI Cable (Optional Accessory)
4.................................................................HDMI Cable (Optional Accessory)
5....................................................................................................Power Cord
6...............................................................RS232 Cable (Optional Accessory)
ꢇꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the Projector
Connect to Video Sources
DVD player, Set−top Box
HDTV receiver
DVD player, Set−top Box
HDTV receiver
3
Video Output
4
1
2
Noottee
Due to the difference
in applications for each
country, some regions
may have different
accessories.
HDMI
1
HDMI
2
12V OUT
USB
Pr
Pb
Y
S-VIDEO
VIDEO
VGA OUT
VGA
/
SCART YPbPr
/
AUDIO OUT
AUDIO IN
L-AUDIO IN-R
IR
RS-232
E62405SP
R
Noottee
12V OUT is a
programmable trigger.
6
5
S−Video Output
1..............................RCA Component Cable for YPbPr (Optional Accessory)
2.............................................. Composite Video Cable (Optional Accessory)
3....................................SCART RGB/S-Video Adapter (Optional Accessory)
4.................................................................HDMI Cable (Optional Accessory)
5....................................................................................................Power Cord
6.............................................................S-Video Cable (Optional Accessory)
ꢇꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cover.
2. Connect the power cord to the projector.
3. Turn On the connected devices.
Noottee
4. Ensure the Power LED is flashing and then press the power
Turn on the projector
first and then select the
signal sources.
button to turn On the projector.
The projector's startup logo screen displays and connected
devices are detected. If the connected device is a laptop,
press the appropriate keys on the computer keyboard to
switch the display output to the projector. (Check the user
manual of the laptop to determine the appropriate Fn key
combination to change display output.)
See Security Settings on page 37 if security lock is enabled.
Noottee
Due to the difference
in applications for each
country, some regions
may have different
accessories.
5. If more than one input device is connected, press the
"Source" button sequentially to switch between devices.
For direct source selection, see page 18.
Noottee
12V OUT is a
programmable trigger.
ꢇꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Powering Off the Projector
1. Press the "
" button on the remote control or "
" button
on the panel of the projector to turn off the projector. First
push of button will display the following message on the
screen.
Press the button again to confirm the shut down. If the
button is not pressed, the message will disappear in 15
seconds.
2. The Power LED flashes green and the fans will speed up
during shut down cooling cycle. The projector reaches
stand-by mode as soon as the Power LED turns red.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
"
" button on the rear of the projector or "
" on the
remote control to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector only when the projector is in stand-by mode.
Warning Indicator
▀■ When the Lamp LED indicator lights red, the projector will
automatically shut itself down. Please contact your local
reseller or service center. See pages 40.
Noottee
▀■ When the Temp LED is on a steady (not flashing) red, the
projector will automatically shut itself down. Under normal
conditions, the projector can be switched on again after it
has cooled down. If the problem persists, you should contact
your local dealer or our service center. See pages 40.
Contact the nearest
service center if the
projector displays these
symptoms. See page
54 for more information.
ꢇꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Adjusting the Projected Image
Adjusting the Projector's Height
The projector is equipped with elevator feet for adjusting
the image height.
Noottee
The projector
To raise the image:
table or stand
should be level
and sturdy.
Lift the projector and press the height-adjuster button
.
The height adjuster drops down
.
Position the
projector so that
it is perpendicular
to the screen.
For personal
safety, please
secure the cables
properly.
To lower the image:
Press the height-adjuster button and gently push down the
projector.
1
2
3
ꢇꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Adjusting Projection Image Size
.H\VWRQHꢀ&RUUHFWLRQꢀ$QJOH
3URMHFWLRQꢀ'LVWDQFH
Standard projection lens: Wide
-
1.59
Tele
-
1.908
Screen Size W X H (16:9)
Projection distance (D)
(m) (feet)
wide
Offset
(A)
Diagonal
length (inch) size
of 16:9 Screen
(m)
(feet)
Width Height Width Height wide
tele
tele
(m)
(feet)
30.00
40.00
0.66
0.89
1.33
1.77
2.21
2.66
3.10
3.54
4.21
5.09
6.20
6.64
0.37
0.50
0.75
1.00
1.25
1.49
1.74
1.99
2.37
2.86
3.49
3.74
2.18
2.91
1.23
1.63
2.45
3.27
4.09
4.90
5.72
6.54
7.76
9.40
-
1.27
-
4.16
0.06
0.07
0.11
0.15
0.19
0.22
0.26
0.30
0.35
0.43
0.52
0.56
0.18
1.41
2.11
2.82
3.52
4.22
4.93
5.63
6.69
8.10
9.86
1.69
2.53
3.38
4.22
5.07
5.91
6.76
8.03
9.72
4.62
6.93
9.24
5.54
8.31
0.25
0.37
0.49
0.61
0.74
0.86
0.98
1.16
1.41
1.72
1.84
60.00
4.36
80.00
5.81
11.09
100.00
120.00
140.00
160.00
190.00
230.00
280.00
300.00
7.26
11.55 13.86
13.86 16.63
16.17 19.40
18.48 22.17
21.94 26.33
26.56 31.87
8.72
Noottee
10.17
11.62
13.80
16.71
300” (overdrive)
for Asia.
20.34 11.44
11.83 32.34 38.80
34.65
21.79 12.26 10.56
-
-
ꢇꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Remote Control
Using the Remote Control
Refer to the "Power On the Projector"
section on page 13.
Power On/Off
Refer to the "Power Off the Projector"
section on page 14.
Press to operate the on-screen pointer.
Laser
Up
Up arrow when connected through USB
to a PC.
Left arrow when connected through USB
to a PC.
Left
Down arrow when connected through
USB to a PC.
Down
Right
Enter
Right arrow when connected through
USB to a PC.
Enter key when connected through USB
to a PC.
L key for emulation of USB mouse left
click via USB.
L
Up selection when OSD on.
p
Page Up key for emulation of USB key-
board via USB when OSD off.
Page+
R key for emulation of USB mouse right
click via USB
R
Press "Source" to choose RGB,
Component, S-Video, Composite Video,
and HDMI source.
Source
Left
Directional
Select Key
Use directional select keys to select
items or make adjustments to your selec-
tion.
Confirm your item selection.
Enter
ꢇꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Using the Remote Control
Automatically synchronize the projector
to the input source.
Re-Sync
Right
Directional
Select Key
Use directional select keys to select
items or make adjustments to your selec-
tion.
Down selection when OSD on.
q
Page Down key for emulation of USB
keyboard via USB when OSD off.
Page-
Press "Keystone +/-" to correct
image-trapezoid (wider top/bottom)
effect.
Keystone +/-
Press "Volume +/-" to adjust volume.
Volume +/-
Press "DVI-D/YPbPr" to choose
Component Video source.
DVI-D/YPbPr/1
Display or exit the on-screen display
menus for projector.
Menu/2
ZOOM/3
HDMI/4
Press "ZOOM" to zoom out images.
Press "HDMI" to choose source from
HDMI connectors.
Press "Freeze" to freeze or unfreeze the
on-screen picture.
Freeze/5
AV Mute/6
S-Video/7
VGA/8
Press "AV Mute" to mute the built-in
speaker.
Press "S-Video" to choose S-video
source.
Press "VGA" to choose source from VGA
connector.
Press "Video" to choose Composite
Video source.
Video/9
ꢇꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
On-screen Display Menus
The Projector has multilingual On-screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press "Menu" on the Remote Control or
Control Panel.
2
When OSD is displayed, use p q keys to select any item in the
main menu. While making a selection on a particular page, press
t u or "
" key on the Remote Control or "Enter" on the Control
Panel to enter sub menu.
3. Use p q keys to select the desired item and adjust the settings by
t u key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press "
" key on the Remote Control or "Enter" on the Control Panel
or "Menu" to confirm, and the screen will return to the main menu.
6. To exit, press "Menu" again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Setting
Sub Menu
ꢇꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Image
Display Mode
There are many factory presets optimized for various types of
images.
Presentation: Good color and brightness from PC input.
Brightness: Optimized for maximum brightness.
Movie: For home theater.
sRGB: Standardised accurate color.
Classroom: Recommended settings for classroom.
Blackboard: Tuned for blackboard usage.
User 1: User's own settings.
User 2: User's own settings.
The initial default settings of this mode is from Presentation
mode. Any further adjustments by the user in User1/2 will be
saved in this mode for future use.
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
Press the t to decrease the contrast.
Press the u to increase the contrast.
ꢈꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Brightness
Adjust the brightness of the image.
Press the t to darken image.
Press the u to lighten the image.
Color
Adjust a video image from black and white to fully saturated color.
Press the t to decrease the color saturation in the image.
Press the u to increase the color saturation in the image.
Tint
Adjust the color balance of red and green.
Press the t to increase the amount of green in the image.
Press the u to increase the amount of red in the image.
Sharpness
Adjust the sharpness of the image.
Press the t to decrease the sharpness.
Press the u to increase the sharpness.
Advanced
Use this option to enter the Advanced menu see page 23.
ꢈꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Image | Advanced
Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of
visible noise in interlaced signals. The range is from "0" to "10".
(0=Off)
Gamma
This allows you to set up gamma curve type. After the initial setup
and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
Film: for date projector.
Video: for video or TV source.
Graphics: for image source.
Standard: for standardized setting.
Color Settings
Color Temperature: Adjust the color temperature. Cold
temperature, the screen looks colder; with Warm temperature,
the screen looks warmer.
RGB Gain/Bias: Press u into the next menu as below and then
p or q to select item. Use t or u to select Red, Green, or
Blue for brightness (Gain) and contrast (Bias).
Color Space: Select an appropriate color matrix type from RGB
or YCbCr.
RGB Channel: Select this menu to adjust the RGB Bias and
Gain levels for each primary (RGB) color.
ꢈꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Display
Format
Use this function to choose your desired aspect ratio.
4:3: This format is for 4x3 input sources.
16:9: This format is for 16x9 input sources, like HDTV and DVD
enhanced for Widescreen TV.
Letter Box: This format is for non-16x9, letterbox source and
for users who use external anamorphic lens to display 2.35:1
aspect ratio using full resolution.
Detail informations about Letter Box mode :
1. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In
this situation, the image will not look right when displayed in
16:9 mode.
In this situation, please try to using the 4:3 mode to view the
DVD.
If the content is not 4:3, there will be black bars around the
image in 16:9 display. For this type of content, you can use
LBX mode to fill the image on the 16:9 display.
2. If you use an external anamorphic lens, this LBX mode also
allows you to watch a 2.35:1 content (include Anamorphic
DVD and HDTV film source) that support anamorphic wide is
enhanced for 16x9 Display in a wide 2.35:1 image.
In this case, there are no black bars. Lamp power and
vertical resolution are fully utilized.
ꢈꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Native: This format displays the original image without any
scaling.
Display area
Picture area
Input Signal
Display on Screen
Zoom
Press t to reduce the size of the image.
Press u to magnify an image on the projected screen.
V Image Shift
Shift the projected image position vertically.
V Keystone
Press the t or u to adjust image distortion vertically and make a
squarer image.
Closed Captioning
Select the screen to display closed captioning.
Off-the supplied default setting.
CC1 I CC2-closed captioning type select.
ꢈꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
System
Menu Location
Choose the menu location on the display screen.
Lamp Settings
Choose this menu to adjust your desired lamp setting.
Projection
Front-Projection
This is the default selection. The image is projected straight on
the screen.
Noottee
Rear-Desktop
Rear-Desktop and
Rear-Ceiling are to be
used with a translucent
screen.
When selected, the image will appear reversed.
Front-Ceiling
When selected, the image will turn upside down.
Rear-Ceiling
When selected, the image will appear reversed in upside down
position.
Background Color
Use this feature to display a "Dark Blue", "Gray", or "Black" screen
when no signal is available.
Startup Image
Select the screen to display during startup.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Power Mode (Standby)
Set the projector in ECO Mode or Active Mode.
Audio Settings
Enter the Audio Settings menu. Set audio level properties.
Projector ID
Select a two digit projector ID from 0 through 99.
RS232
Allows RS232 control of an individual projector.
Network
Allows LAN via web browser (Internet Explore) to control of
projector. See pages 30 for more information.
ꢈꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
System |
Lamp Settings
Lamp Hour
Display the cumulative lamp operating time.
Lamp Reminder
Choose this function to turn on the lamp reminder. Lamp reminder
will pop up 30 hours before reaching end of its life.
Brightness Mode
Choose "Bright" to increase the lamp brightness. Choose "STD" to
return to normal mode.
Lamp Reset
Reset the lamp life hour after replacing the lamp.
ꢈꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
System |
Startup Image
Image
Select the screen to display during startup.
Default - the supplied default startup screen.
User - customized screen capture using the Image Capture
function.
Image Capture
Noottee
Capture a displayed screen to use as the startup screen.
1. Display the desired screen on the projector.
2. Select Image Capture from the Advanced menu.
Startup Capture
support in:
HDMI 720p/1080p
VGA 1920X1080@60Hz
YPbPr 720p/1080p
3. Select OK. Screen capture in progress will display.
When finished, Screen capture Succeeded will display.
The captured screen is saved as User in the Image menu.
ꢈꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
System |
Network
For simplicity and ease of operation, the Optoma projector provides
diverse networking and remote management features.
The Network function of the projector through a network, such as re-
motely manage: Power On/Off, Brightness and Contrast settings. Also,
projector status information, such as: Video-Source, Sound-Mute, etc.
Noottee
Use straight-thru
cable when
connecting to a
hub, switch or a
router.
Use crossover
cable for direct
PC to projector
connection.
1. Connect an RJ45 cable to RJ45 ports on the projector and the PC
(Laptop).
HDMI
1
HDMI
2
12V OUT
USB
Pr
Pb
Y
S-VIDEO
VIDEO
VGA OUT
VGA
/
SCART / YPbPr
AUDIO OUT
AUDIO IN
L-AUDIO IN-R
IR
RS-232
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
2. On the PC (Laptop), select Start -> Control Panel ->
Network Connections.
3. Right click on your Local Area Connection and select Properties.
4. In the Properties window, select the General tab, and select
Internet Protocol (TCP/IP).
5. Click Properties.
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
6. Fill in the IP address and Subnet mask, then press OK.
7. Press the Menu button on the projector.
8. Select OSD-> SETUP-> Network-> Enabled.
9. Input the following:
10.10.10.10
IP Address:
Subnet Mask: 255.255.255.0
0.0.0.0
0.0.0.0
Gateway:
DNS:
10. Press Apply (Enter) to confirm settings.
11. Open a web browser.
12. In the Address bar, input the IP address: 10.10.10.10.
13. Press Apply.
The projector is setup for remote management. The Network function
displays as follows.
ꢀꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
14. Based on network web-page for the input-string in [tools] tab, the
limitation for Input-Length is in the below list (“space” and the other
punctuation key included):
Category
Item
Input-Length (characters)
IP Address
IP ID
15
2
Crestron Control
Port
5
Projector Name
Location
10
Projector
9
Assigned To
DHCP (Enabled)
IP Address
Subnet Mask
Default Gateway
DNS Server
Enabled
9
(N/A)
15
Network Configuration
15
15
15
(N/A)
15
User Password
New Password
Confirm
15
Enabled
(N/A)
15
Admin Password
New Password
Confirm
15
Noottee
For more
information, please visit
com
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Setup
Language
Choose the multilingual OSD menu. Press t or u into the sub
menu and then use the p or q key to select your preferred
language. Press "Select (Enter)" to finalize the selection.
Input Filter
Enable the input filter. Press t or u into the next menu as below
and then use p or q to select. Press "Select (Enter)" to finalize
the selection. The projector will not search inputs that are
de-selected.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Source Lock
When this function is turned off, the projector will search for other
signals if the current input signal is lost. When this function is
turned on, it will search for a specified connection port.
High Altitude
Choose "On" to turn on High Altitude mode. Operates the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Information Hide
Suppress informational messages on the projected screen.
On: No status messages appear on screen during operation.
Off: Status messages appear as normal on screen during
operation.
Auto Power Off
Set the time interval (in minutes) to power off the system if there is
no input signal detected.
Signal
VGA Source
Video Source
HDMI Source
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Automatic: Enable or disable Automatic to automatically select
the appropriate settings.
Enabled - the projector will automatically select the
appropriate settings.
Disabled - the projector won’t automatically select the
appropriate settings.
Frequency: Change the display data frequency to match the
frequency of your computer's graphic card. When you
experience a vertical flickering bar, use this function to make an
adjustment.
Noottee
Phase: Synchronize the signal timing of the display with the
graphics card. If you experience an unstable or flickering
image, use this function to correct it.
"IRE" is only supported
on NTSC signal.
H Position: Adjust the horizontal position.
V Position: Adjust the vertical position.
White Level: Allow user to adjust White Level when inputting
SVideo or Video/CVBS signals.
Black Level: Allow user to adjust Black Level when inputting
SVideo or Video/CVBS signals.
Saturation: Adjust a video image from black and white to fully
saturated color. Press the t to decrease the amount of color in
the image. Press the u to increase the amount of color in the
image.
Hue: Adjust the color balance of red and green. Press the t
to increase the amount of green in the image. Press the u to
increase the amount of red in the image.
IRE: Adjust measurement of composite video signals.
Black Level (for HDMI): Allows user to adjust the Black Level
for HDMI signals.
Signal Power On
Off: Projector can only be turned on by pressing the "Power"
button.
On: Projector turns on automatically when an active signal is
detected.
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Security
Security Timer: Enter the Security Timer sub menu to change
the settings.
Enter the Months, Days, and hours that the projector can be
used without entering the password. Exiting to the Setup menu
activates the Security Timer.
Once activated, the projector requires a password on the
specified dates and times to allow power on and access to the
security menu.
If the projector is in use and the Security Timer is active, the
Password screen displays 60 seconds before the password is
required.
Noottee
No password is
required to access
Setup | Security unless
the Security Timer or
Security Settings are
enabled.
Security Setting: Enable or disable the security password.
Enabled - the current password is required to power on the
projector and access the Security menu.
Disabled - Disabled-no password is required for any
function.
When security is enabled, the Password screen displays at
startup and before access to the Security menu is allowed:
Reset
Return the adjustments and settings to factory default values.
Current: Return the current menu's settings to factory default.
All: Return the settings for all menus to factory default values.
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Troubleshooting
If you experience a problem with your projector,
please refer to the following information. If a
problem persists, please contact your local reseller
or service center.
Image
No image appears on-screen
Ensure all the cables and power connections are correctly and
securely connected as described in the "Installation" section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the "Replacing the Lamp" section.
Make sure you have removed the lens cap and the projector is
switched on.
Image is out of focus
Make sure the Lens cap is removed.
Adjust the Focus Ring on the projector lens.
Make sure the projection screen is between the required distance
from the projector. See pages 16.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will
show the best image in 16: 9 format on projector side.
If you play the LBX format DVD title, please change the format as
LBX in projector OSD.
If you play 4:3 format DVD title, please change the format as 4:3 in
projector OSD.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
Please setup the display format as 16:9 (wide) aspect ratio type on
your DVD player.
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Image is too small or too large
Adjust the zoom lever from the lens.
Move the projector closer to or further from the screen.
Press [Menu] on the projector panel, go to "Display->Format".
Try the different settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the
screen and below the bottom of the screen and use PureShift to
make adjustments to the image position.
Use "Display->V Keystone" from the OSD to make an adjustment.
Image is reversed
Select "System->Projection" from the OSD and adjust the
projection direction.
Other
The projector stops responding to all controls
If possible, turn off the projector, then unplug the power cord and
wait at least 20 seconds before reconnecting power.
Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the "Replacing the Lamp" section on
page 48.
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Projector LED Status Indicator
Power LED
Temp LED
Lamp LED
(Red)
Message
(Green)
(Red)
Slow Flashing
2 sec off
Standby State (Input power cord)
2 sec on
Flashing
Power on (Warming)
0.5 sec off
0.5 sec on
Power on & Lamp lighting
Noottee
Flashing
1 sec off
Power off (Cooling)
1 sec on
Steady light =>
No light =>
< 10 sec to off
Flashing
Error (Lamp fail)
Error (Fan fail)
0.5 sec off
0.5 sec on
Flashing
Flashing
0.5 sec off
0.5 sec on
0.5 sec off
0.5 sec on
Flashing
Error (Over Temp)
0.5 sec off
0.5 sec on
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
LED states
On Screen Messages
Fan failed:
The projector will switch off automatically.
Over temperature:
The projector will switch off automatically.
Replacing the lamp:
Lamp is approaching the end of its rated life.
Replacement suggested.
Warning:
Only use genuine
lamps.
Remote Control
If the remote control does not work
Check the operating angle of the remote control is within ±15° both
horizontally and vertically of on of the IR receivers on the projector.
Make sure there are no any obstructions between the remote
control and the projector. Move to within 7 m (23 ft) of the projector.
Make sure batteries are inserted correctly.
Replace batteries if they are exhausted.
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
|
