™
FoodPro
PReMIeR FOOD PROCeSSOR
INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Introduction
Food Processor Safety ..............................................................................................4
electrical Requirements ............................................................................................4
Important Safeguards ..............................................................................................5
Cleaning ..................................................................................................................6
Features and Operations
Food Processor Features ....................................................................................... 7-9
Mulitpurpose Blade and Dough Blade Assembly .....................................................10
Mulitpurpose Blade and Dough Blade Disassembly .................................................11
Mulitpurpose Blade and Dough Blade Use ..............................................................12
Slicing and Shredding Disc Assembly ......................................................................13
Slicing and Shredding Disc Disassembly ..................................................................14
Slicing and Shredding Disc Use ...............................................................................15
Mini Chopper Assembly .........................................................................................16
Mini Chopper Disassembly .....................................................................................17
Mini Chopper Use ..................................................................................................19
Food Processing Tips...............................................................................................20
Helpful Hints .....................................................................................................21-22
Warranty Info.........................................................................................................23
Registration Form ...................................................................................................24
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOD PROCESSOR SAFETY
Your safety and the safety of others are very important.We have provided many
important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential
hazards that can kill or hurt you and others.
WARNING
DANGER
All safety messages will follow the safety alert symbol and either the word “DANGeR”
or “WARNING.” These words mean: You can be killed or seriously injured if you don’t
follow the instructions.
All safety messages will tell you what the potential hazard is, how to reduce the chance
of injury, and what can happen if the instructions are not followed.
ELECTRICAL REQUIREMENTS
Volts: 120 V.A.C. only.
Hertz: 60 Hz
NOTe: This Food Processor has a polarized plug (one blade is wider than the other).
To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not modify the plug in any way.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician or service person install an outlet near the appliance.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock do not put Food Processor in water or
other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from the outlet when not in use, before taking on or off parts, and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the
nearest Authorized Service Facility for examination, repair, or electrical or
mechanical adjustment.
7. The use of attachments not recommended or sold by the manufacturer may cause
fire, electric shock, or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Keep hands and utensils away from moving blades or discs while processing food
to reduce the risk of severe injury to persons or damage to the Food Processor.
A scraper may be used but must be used only when the Food Processor is not running.
11. Blades are sharp. Handle carefully.
12. To reduce the risk of injury, never place cutting blade or discs on base without first
putting bowl properly in place.
13. Be certain cover is securely locked in place before operating appliance.
14. Never feed food by hand. Always use the food plunger.
15. Do not attempt to defeat the cover interlock mechanism.
16. This product is designed for household use only.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
First Cleaning
Before using your Omega Food Pro for the first time, wash all removable parts.
Cleaning the Food Processor
1. Make sure the Food Pro is unplugged.
2. Wipe the motor base and cord with a warm, sudsy cloth, and wipe clean with a
damp cloth. Dry with a soft cloth. Do not use abrasive cleansers or scouring pads.
3. All removable parts of the Food Pro are dishwasher safe. Top shelf is preferred for
parts that fit. If washing the Food Pro parts by hand, avoid the use of abrasive
cleansers or scouring pads. They may scratch or cloud the work bowl and cover.
Thoroughly dry all parts after washing.
4. Wrap the power cord around the work bowl.
5. Discs, shafts, and blades should be stored in the provided storage case or
assembled onto the Food Pro. Always keep out of the reach of children.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOD PROCESSOR FEATURES
This food processor includes the following items:
• Large 11-Cup Work Bowl
• Large Chopping/Mixing
Stainless Steel Blade
• Work Bowl Cover with
wide Feed Chute
• Stainless Steel Dough Blade
• Compact 4-Cup Mini Chopper
• Compact Chopping/Mixing
Stainless Steel Blade
• Wide Plunger with Narrow
Plunger Insert
• 2mm/4mm Stainless
Steel Slicing Disc
• 2mm/4mm Stainless Steel
Shredding Disc
• Disc Adapter
• Custom Spatula/Cleaning Tool
• Heavy-Duty Base
• Storage Container
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOD PROCESSOR FEATURES
1. Large 11-Cup Work Bowl
1.
Durable polycarbonate bowl large enough for
most jobs.
2. Work Bowl Cover with Wide Feed
Chute Handles large items with minimal preparation.
3. Large Chopping/Mixing
Stainless Steel Blade
2.
Multi-use blade for quick mincing, chopping,
mixing, and emulsifications.
4. Stainless Steel Dough Blade
Mixes and kneads dough.
3.
4.
5. Compact 4-Cup Mini Chopper
with Chopping/Mixing Stainless
Steel Blade
Instantly converts 11 Cup Processor to 4 Cup
Mini Chopper. Convenient for small everyday jobs.
6. Wide Plunger with Narrow
Plunger Insert
Use Wide Plunger and Wide Feed Chute for larger
items. For smaller or slender items, use plunger
insert and s mall feed chute. The wide plunger can
also be used as a convenient 4 oz. measure. The
plunger insert has a small hole in the bottom of
the plunger for emulsifications. The small hole
slowly drizzles oil into the work bowl.
5.
6.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOD PROCESSOR FEATURES
7.
7. 2mm/4mm Stainless Steel
Slicing Disk
The two-sided disc will produce two
different size slices depending on the
side used.
4 mm Side = 1/8-inch Slices (approx.)
2 mm Side = 1/16-inch Slices (approx.)
8.
9.
8. 2mm/4mm Stainless Steel
Shredding Disc
The two-sided disc will produce two
different size shreds depending on
the side used.
4 mm Side = 1/8-inch Shreds (approx.)
2 mm Side = 1/16-inch Shreds (approx.)
9. Disk Adapter
Adapter installs into the center of a
slicing or shredding disc and onto the power
shaft.
10.
11.
10. Custom Spatula/Cleaning Tool
Spatula/Tool is designed for the shape of the
work bowl for easier removal of food from
bowls.
11. Heavy-Duty Base
On, Off, and Pulse Control on Power Panel.
Houses Motor with power shaft.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY – LARGE BLADE OR DOUGH BLADE
1. Place the large work bowl onto the
motor housing with the main handle
to the left of the power panel. This
aligns the bowl to properly engage
the safety interlock. Turn the main
handle to the right until it “clicks”
or “locks” into place. The main
handle should now be centered
with the Power Panel.
1.
2. Place the Large Blade or Dough Blade
onto the main motor shaft. You may
have to rotate the blade partially to
properly “seat” onto the shaft.
2.
3. Place the Work Bowl Cover onto the
Work Bowl with the interlock “tab”
to the left of the main handle. Turn
the Cover to the right until it “clicks”
or “locks” into place. The “tab” should
now be aligned with the Main Handle.
3.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DISASSEMBLY – LARGE BLADE OR DOUGH BLADE
1. Rotate the Cover to the left until the
1.
“tab” is unseated.
2. Remove the Blade by pulling upward.
(If the blade is held in place by
ingredients, it may be removed with
the Work Bowl)
3. Rotate the Main Handle to the left
until it is unseated and lift off of the
motor housing.
2.
3.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
USING – LARGE BLADE OR DOUGH BLADE
Maximum Liquid Level
Inserting Ingredients
This line is visible on the work bowl. Use
as an indication of the maximum amount
of liquid that can be used in the Food Pro.
When Chopping or Mixing, items may
be placed around the blade before the
cover is installed or placed down the feed
chute during operation. Most items will
work best when placed around the blade
before the cover is installed, but not always.
It is best to experiment with both styles
to decide which will work best for your
needs. Items will chop best when 1 to 1 ½
inches in size.
Power Pad
The Food Pro will not operate until the
Large Work Bowl and the Work Bowl
Cover are both properly installed. Once
installed, the indicator light will remain lit
if the unit has power.
On – Once pressed, the Food Pro will
run continuously.
Inserting Ingredients – Wide Plunger w/
plunger insert
Off – Stops the Food Pro. The indicator
light will remain on.
When mixing ingredients, the plunger
insert can be used to drizzle liquids
(example: oil) to add the liquid slowly.
This is helpful when making emulsions.
Pulse – The Food Pro will run only
when pressed. Short bursts can give
more accurate results.
The Wide Plunger has a recess that is
approximately 4 liquid ounces to aid in
measuring.
NOTE: If the unit fails to operate, make sure the work
bowl and cover are properly locked on the base.
Dough Blade
The dough blade is designed for mixing
and kneading dough quickly and thor-
oughly. For the best results, do not knead
recipes using more than 2-3 cups of flour.
PULSE
OFF
ON
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY–SLICING OR SHREDDING DISK
1.
1. Place the large work bowl onto the
motor housing with the main handle
to the left of the power panel. This
aligns the bowl to properly engage the
safety interlock turn the main handle to
the right until it clicks” or “locks” into
place. The main handle should now be
centered with the Power Panel.
2.
3.
2. The desired size of Slicing or Shredding
should be facing away from the adapter
when installing the disk
3. Place the Slicing or Shredding disk
onto the Disc Adapter. Be sure to align
the center hole of the disk with the
disc adapter.
4. Once the Adapter is inserted into the
Disk, rotate the disk until it is seated.
5. Place the Adapter/Disk Assembly onto
the main motor shaft. You may have to
rotate the assembly partially to properly
“seat” onto the shaft.
4.
5.
6. Place the Work Bowl Cover onto the
Work Bowl with the interlock “tab” to
the left of the main handle. Turn the
Cover to the right until it “clicks” or
“locks” into place. The “tab” should
now be aligned with the Main Handle.
6.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DISASSEMBLY – SLICING OR SHREDDING DISK
1. Rotate the Cover to the left until
1.
the “tab” is unseated.
2. Remove the Disk and Adapter by
pulling upward.
3. Remove the Disk from the Adapter
by rotating the disk and/or adapter.
4. Rotate the Main Handle to the left
until it is unseated and lift off of the
motor housing.
2.
3.
4.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING – SLICING OR SHREDDING DISK POWER PAD
The Food Pro will not operate until the
Large Work Bowl and the Work Bowl
Cover are both properly installed. Once
installed, the indicator light will remain lit
if the unit has power.
Inserting Ingredients – Wide Plunger w/
plunger insert
Items should be placed into the Feed
Chute. If needed, use the Wide Plunger
to push items down the feed chute. If
more consistent slicing is desired when
slicing slender items, the Narrow Plunger
Insert can be used. Rotate the Plunger
Insert partially to unlock the insert from
the Wide Plunger. Place the Wide Plunger
into the Feed Chute. Place slender items
(example: carrots) into the narrow feed
chute and use the insert plunger to push
the items down the feed chute.
On – Once pressed, the Food Pro will
run continuously.
Off – Stops the Food Pro. The indicator
light will remain on.
Pulse – The Food Pro will run only when
pressed. Short bursts can give more
accurate results.
NOTE: If the unit fails to operate, make sure the work
bowl and cover are properly locked on the base.
PULSE
OFF
ON
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY-MINI CHOPPER
1.
1. Place the large work bowl onto the
motor housing with the main handle
to the left of the power panel. This
aligns the bowl to properly engage the
safety interlock. Turn the main handle
to the right until it “clicks” or “locks”
into place. The main handle should
now be centered with the Power Panel.
2. Inset the Min Chopper Bowl into the
Large Work Bowl. You may have to
rotate the bowl until it is properly
seated. The Mini Chopper Bowl is
not properly inserted if it can still
be rotated.
2.
3. Place the Mini Blade onto the main
motor shaft. You may have to rotate
the blade partially to properly “seat”
onto the shaft.
4. Place the Work Bowl Cover onto the
Work Bowl with the interlock “tab”
to the left of the main handle. Turn
the Cover to the right until it “clicks”
or “locks” into place. The “tab” should
now be aligned with the Main Handle.
3.
4.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DISASSEMBLY-MINI CHOPPER
1. Rotate the Cover to the left until the
1.
“tab” is unseated.
2. Remove the Mini Blade by pulling
upward. (If the blade is held in place by
ingredients, it may be removed with the
Mini Chopper Bowl)
3. Remove the Mini Chopper Bowl from
the Large Work Bowl. There are two
finger tabs on inner surface of the bowl.
Using two fingers, the bowl can be
removed easier.
2.
4. Rotate the Main Handle to the left
until it is unseated and lift off of the
motor housing.
3.
4.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING MINI CHOPPER
Power Pad
Inserting Ingredients
The Food Pro will not operate until the
Large Work Bowl and the Work Bowl
Cover are both properly installed. Once
installed, the indicator light will remain lit
if the unit has power.
Place the items into the Mini Chopper
bowl after the blade has been installed.
Additional ingredients can be placed
down the feed chute.
On – Once pressed, the Food Pro will
run continuously.
Off – Stops the Food Pro. The indicator
light will remain on.
Pulse – The Food Pro will run only when
pressed. Short bursts can give more
accurate results.
NOTE: If the unit fails to operate, make sure the work
bowl and cover are properly locked on the base.
PULSE
OFF
ON
19
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOD PROCESSING TIPS
Hard cheese
(example: Parmesan, Romano)
Julienne / Matchstick slices
Use the Slicing Disk to prepare julienne
If the cheese cannot be pierced with the
tip of a sharp knife, it is too hard to process.
Do not use your Food Pro for processing.
or matchstick style strips of produce.
Place food into feed chute horizontally.
Using the plunger, push with even
pressure to make plank like slices.
Place plank like slices into feed chute
again. Position the planks vertically
for shorter pieces or horizontally for
longer pieces. Process, using even pressure.
If the cheese can be pierced with the tip
of a sharp knife, it is okay to continue.
Soft Cheese can be shredded with the
shredding disks, but when attempting to
shred hard cheese, you can use the multi-
purpose blade.
Slice uncooked meat or poultry
Place 1-inch pieces into the work bowl.
Process, using short pulses, until coarsely
chopped. Process continuously until finely
grated. Pieces of cheese can also added
through the feed chute while the processor
is running.
Cut or roll food to fit feed chute.
Wrap and freeze food until hard to
the touch, 30 minutes to 2 hours,
depending on thickness of food.
Check to be sure you can still pierce
food with the tip of a sharp knife.
If not, allow items to thaw slightly.
Process, using even pressure.
Soft cheese
For best results with soft cheeses, such
as mozzarella, freeze 10 to 15 minutes
before processing. Cut to fit feed chute.
Process, using even pressure.
Slice cooked meat or poultry food
should be very cold. Cut in pieces
to fit feed chute. Process, using
even pressure.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
HELPFUL HINTS
1. Never process any food that is so
4. Different foods require varying degrees
of pressure for best shredding and
slicing results. In general, use light
pressure for soft, delicate foods
(strawberries, tomatoes, etc.),
moderate pressure for medium foods
(zucchini, potatoes, etc.), and firmer
pressure for harder foods (carrots,
apples, hard cheeses, partially frozen
meats, etc.).
hard or firmly frozen that it cannot
be pierced with the tip of a sharp knife
Hard food can cause damage to the
blade or motor. If a piece of hard food,
such as carrot, becomes wedged or
stuck on the blade, stop the processor
and remove the blade. Carefully
remove food from the blade.
2. Do not overfill work bowl or mini
bowl. For thin mixtures, fill work
bowl up to 1⁄2 to 2/3 full. For thicker
mixtures, fill work bowl up to 3⁄4 full.
For liquids, fill up to the maximum
level as described on page XX. When
chopping, the work bowl should be no
more than 1/3 to 1⁄2 full. Use the mini
bowl for up to 1 cup of liquid or 1⁄2
cup solids.
5. Soft and medium-hard cheese may
spread out or roll up on the shredding
disc. To avoid this, shred only well-
chilled cheese.
6. Sometimes slender foods, such as
carrots or celery, fall over in the feed
chute, resulting in an uneven slice.
To minimize this, cut food in several
pieces and pack the feed chute with
the food. For processing small or
slender items, the small feed chute
in the two piece food plunger will
prove especially convenient.
3. To capitalize on the speed of the
processor, drop ingredients to be
chopped through the feed chute
while the processor is running.
7. When preparing a cake or cookie
batter or quick bread, use the multi
purpose blade to cream fat and sugar
first. Add dry ingredients last. Place
nuts and fruit on top of flour mixture
to prevent over-chopping. Process
nuts and fruits, using short pulses,
until blended with other ingredients.
Do not overprocess.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HELPFUL HINTS
8. When shredded or sliced food piles
14. To remove the contents of the work
bowl without removing the multipurpose
blade, grasp the work bowl from the
bottom and place one finger through
the center opening to hold the blade
in place. Then remove food from the
bowl and blade with a spatula.
up on one side of the bowl, stop the
processor and redistribute the food
using a spatula.
9. When food quantity reaches the bottom
of a slicing or shredding disc, remove
the food.
15. Your Food Processor is not designed
10. A few larger pieces of food may
remain on top of the disc after
to perform the following functions:
• grind coffee beans, grains, or
hard spices
slicing or shredding. If desired, cut
these by hand and add to mixture.
• grind bones or other inedible parts
of food
11. Organize processing tasks to
minimize bowl cleanup. Process
dry or firm ingredients before
liquid ingredients.
• liquefy raw fruits or vegetables
• slice hard-cooked eggs or
un-chilled meats.
12. To clean ingredients from the
multipurpose blade easily, just
empty the work bowl, replace
the lid, and pulse 1 to 2 seconds
to spin the blade clean.
13. After removing the work bowl cover,
place it upside down on the counter.
This will help keep the counter clean.
This warranty extends to the purchaser and any succeeding owner for Food Processors
operated in the United States and District of Columbia. Omega Food Processor Warranty
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OMEGA PRODUCTS, INC.
Omega Model Food Pro
Omega Products, Inc. warrants this food processor to be free from defects of
workmanship and material under normal use and service. The food processor is required
to be operated solely on the electric current indicated on the unit. Damage or
malfunction caused by use on other electrical current is excluded from this warranty.
This warranty is limited to repair or replacements of original parts, which, in the opinion
of Omega Products, Inc. are defective in workmanship or material.
Should such a defect be discovered within five (5) years from date of purchase, Omega
Products, Inc. will, upon receipt of machine, shipped prepaid, repair such defect and
return the unit prepaid. This warranty does not cover breakage of any part in shipment
or damage caused by misuse.
A service charge of $10.00 must accompany any unit over one (1) year old. For service,
send food processor or part to:
Omega Products, Inc.
6291 Lyters Lane
Harrisburg, PA 17111
For additional service or operational information please contact Omega Products, Inc. directly.
Phone: 717.561.1105 Fax-717.561.1298
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Registration
and Guarantee Record
Omega Food Pro
Serial Number ___________________________________________________
Name __________________________________________________________
Address_________________________________________________________
City __________________ State____________________ Zip Code ________
Phone __________________________________________________________
Purchased From__________________________________________________
City __________________ State_____________________________________
Date of Purchase _________________________________________________
IMPORTANT
To protect your purchase, fill out and mail
this form within thirty (30) days of purchase.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Omega Food Pro
11-Cup Direct Drive Food Processor
with 4-Cup Mini Chopper
INSTRUCTION MANUAL
Omega Products, Inc.
6291 Lyters Lane
Harrisburg, PA 17111
717-561-1105
717-561-1298 fax
800-633-3401
Download from Www.Somanuals.com. All Manuals Search And Download.
|