Download from Www.Somanuals.com. All Manuals Search And Download.
Dial Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
One-Touch Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Programming One-Touch Keys........................................29
Chain Dialing........................................................................... 31
Programming Auto Dial Numbers . . . . . . . . . . . . . . . . . . . . 31
Programming Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Preparing Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Document size.......................................................................... 34
Multiple page documents......................................................... 34
Loading Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Sending Faxes To Single Location. . . . . . . . . . . . . . . . . . . . 35
Search Key Dialing...........................................................36
Real-Time Dialing ............................................................36
Redialing...........................................................................36
Confirming Results...........................................................36
Stopping Transmissions....................................................37
Receiving Faxes Manually . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Receiving Faxes Into Memory . . . . . . . . . . . . . . . . . . . . . . . 37
Memory Reception .................................................................. 37
No Paper Reception ................................................................. 38
No Toner Reception................................................................. 38
Print Memory Reception...................................................38
Canceling Messages Stored In Memory...........................38
Rejecting Unsolicited Fax Messages................................39
Power Failures & Memory ...............................................39
Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Making Copies Using Manual Paper Feeder....................40
Using Voice Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Initiating Voice Request................................................... 41
Answering Voice Request................................................ 42
Advanced Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Broadcast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Perform a Broadcast Operation........................................ 42
Delayed Sending of Faxes . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Sending Delayed Faxes.................................................... 44
Canceling Delayed Transmissions ................................... 44
Confidential Faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Sending Confidential Faxes ............................................. 45
Receiving Confidential Faxes .......................................... 46
Creating Confidential Mailbox.................................................46
Changing Password or Closing Mailbox..................................47
Printing Confidential Faxes......................................................47
Relay Broadcasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Relay Initiating Station.............................................................48
Relay Key Station.....................................................................48
Initiating Relay Broadcasts .............................................. 48
Polling (Sending Documents Requested by Another Fax) . 49
Polling Transmission........................................................ 49
Canceling ITU Bulletin Polling Transmission................. 50
Printing Bulletin Messages .............................................. 50
Polling Reception (Dialing Another Fax Machine to Request
Documents) ...................................................................... 51
Dual Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
While Sending Faxes........................................................ 51
While Receiving Faxes .................................................... 52
While Making Copies ...................................................... 52
While Printing Reports..................................................... 52
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Features & Operations. . . . . . . . . . . . . . . . . . 53
Viewing Your Current Settings ........................................53
User Function Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
User Function Settings List ..............................................53
Broadcast Mode .................................................................... 56
25 Instant Dial = ON:............................................................ 56
25 Instant Dial = OFF, 17 Mem./Feeder SW = MEMORY:. 56
25 Instant Dial = OFF, 17 Mem./Feeder SW = FEEDER:.... 56
Changing User Function Settings.....................................57
Setting Distinctive Ring........................................................... 57
Dial Parameter Settings ....................................................58
Dial Parameter Settings List .................................................... 58
Changing Dial Parameter Settings........................................... 59
Reports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Understanding Reports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Activity Report .................................................................60
Broadcast MCF (Confirmation) Report............................60
Active Memory Files Report ............................................61
Telephone Directory.........................................................61
Configuration Report........................................................61
Protocol Dump..................................................................62
Other Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Message Confirmation Report..........................................62
Confidential Reception Report .........................................62
Broadcast Entry Report.....................................................62
Power Outage Report........................................................63
Printing Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Printing Message Confirmation Report............................63
Printing Reports................................................................63
Codes Used In Reports 64
Result Codes..................................................................... 64
Communication Codes..................................................... 64
Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Clearing Document Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Clearing Printer Paper Jams. . . . . . . . . . . . . . . . . . . . . . . . . 66
Replacing Toner Cartridge. . . . . . . . . . . . . . . . . . . . . . . . . . 69
Replacing Image Drum Unit . . . . . . . . . . . . . . . . . . . . . . . . 71
Reading Print Counters .................................................... 73
Shipping the Fax Machine . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Problem Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
I-Fax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Operation Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
To Use Internet Fax.......................................................... 78
What Your I-Fax Machine Can Do . . . . . . . . . . . . . . . . . . . 79
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Machine Installation......................................................... 79
Network Setup.................................................................. 79
Customization .................................................................. 79
LAN Topologies and Operating Systems ........................ 79
LAN..........................................................................................79
Internet Fax Protocols ..............................................................80
Internet Fax Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . 80
General Information .................................................................80
SMTP Server Address / Name ......................................... 80
DNS Server’s IP ADDRESS............................................ 80
Email Address .................................................................. 80
Internet Fax Reception. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
General Information .................................................................80
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily ......................................................................................88
Network Settings.............................................................. 88
IP Address..............................................................................88
Subnetmask............................................................................89
Default Gateway....................................................................89
SMTP Server Name...............................................................89
POP Server Name..................................................................89
Pop User Id ............................................................................90
Pop Password.........................................................................90
DNS P.SRV Address .............................................................91
DNS S.SRV Address .............................................................91
FAX Email Address...............................................................91
I-Fax NIC Initialize.......................................................... 91
Email Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Registering Addresses...................................................... 92
Program OT Email Addresses..................................................92
Program Group Email Addresses.............................................93
I-Fax User Interaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Sending Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Email Using Email Key ................................................... 94
Email Key Options...................................................................94
Email Using OT Key........................................................ 95
Email Using Group Email Setting.................................... 95
Email Using Broadcast Feature........................................ 95
Receiving Email. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Manual Email Reception.................................................. 96
I-Fax Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
SMTP Communication..................................................... 97
POP3 Communication...................................................... 97
Transmission Troubleshooting......................................... 98
POP Server Address / Name.............................................81
DNS Server’s IP Address .................................................81
POP Server User Name ....................................................81
POP Server Password .......................................................81
Network Settings List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
List of Settings......................................................................... 81
Components of an Internet Fax . . . . . . . . . . . . . . . . . . . . . . 81
Header...............................................................................82
Email.................................................................................82
Attachment(s): TIFF or PDF ............................................82
Helpful Hints (I-Fax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
PSTN Faxing vs. Internet Faxing .....................................82
Internet Fax.......................................................................82
Email Addresses vs. PSTN (Phone) Numbers..................82
Status of Server.................................................................83
Backup/Archive (Email Scanning)...................................83
I-Fax Network Set Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Identifying Current Settings on Fax Machine ..................83
Print the Configuration Report ................................................ 83
I-Fax NIC Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
I-Fax NIC Settings............................................................85
Text Print............................................................................... 85
Header Print .......................................................................... 86
Coding Mode......................................................................... 86
Ex.Fine Mode........................................................................ 86
Sender ID (Email) ................................................................. 86
Send File Format................................................................... 87
Send Notification .................................................................. 87
I-Fax NIC Update.................................................................. 87
POP Interval......................................................................87
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Reception Troubleshooting...............................................98
Authentication - Unable To Send Global E-mails............99
Symptom.................................................................................. 99
Cause........................................................................................ 99
Resolution ................................................................................ 99
Additional Info......................................................................... 99
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Consumables.....................................................................101
Options..............................................................................101
Warranty, Regulatory, and Safety Information . . . . . . . . 102
Limited Warranty: U.S. & Canada ...................................102
Service and Support: U.S. & Canada................................103
Oki Data Service Providers: U.S. & Canada....................103
Oki Data Contact Locations: U.S. & Canada ...................103
United States............................................................................ 103
Canada ..................................................................................... 103
Sales and Service Dealers: U.S. & Canada.......................103
Telephone Support................................................................... 104
Automated Attendant............................................................... 104
Customer Support Professionals.............................................. 104
Material Safety Data Sheet. . . . . . . . . . . . . . . . . . . . . . . . . . 104
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Federal Communications Commission.............................110
Industry Canada (IC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
European Union Council of the European Communities. . . 113
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
and referred to in this User’s Guide will not affect the
applicability of the information in it.
Notes and Disclaimer
Mention of software products manufactured by other companies
does not necessarily constitute endorsement by the manufacturer
of this equipment.
Note: A note appears in this manual like this. A note provides
additional information to supplement the main text which
may help you to use and understand the product.
This product complies with the requirements of the Council
Directives 89/336/EEC and 73/23/EEC on the approximation of
the laws of the member states relating to electromagnetic
compatibility and low voltage.
CAUTION:
A caution appears in this manual like this. A caution pro-
vides additional information which, if ignored, may result
in equipment malfunction or damage.
© 2003 Oki Data Americas. All rights reserved.
Energy Star is a trademark of the United States Environmental
Protection Agency.
Windows is either a registered trademark or a trademark of
Microsoft Corporation in the United States and/or other countries
WARNING:
Please address any comments on this publication by mail to:
Oki Data Americas
A warning appears in this manual like this. A warning provides
additional information which, if ignored, may result in a risk of
personal injury.
Training and Publications Department
2000 Bishops Gate Boulevard
Mount Laurel, NJ 08054-4620
or by email to:
Every effort has been made to ensure that the information in this
document is complete, accurate, and up-to-date. The
manufacturer of this equipment assumes no responsibility for the
results of errors beyond its control.
Please visit Okidata’s multilingual web site at:
http://www.okidata.com
The manufacturer of this equipment also cannot guarantee that
changes in software and equipment made by other manufacturers
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OKIFAX is a registered trademark/marque déposée/marca
registrada of Oki Electric Industry Company, Ltd.
Safety
ENERGY STAR
As an ENERGY STAR Partner, Okidata has
determined that this product meets the Energy Star
guidelines for energy efficiency.
Your fax machine has been carefully designed to give you years
of safe, reliable performance. As with all electrical equipment,
however, there are a few basic precautions you should take to
avoid hurting yourself or damaging the fax machine.
General
• Read this User’s Guide carefully and keep it in a safe but
accessible place so that you can use it for future reference.
• Read and follow all warning and instruction labels on the fax
machine itself.
• Disconnect the fax machine before you clean it. DO NOT
use liquid or aerosol cleaners to clean the fax machine.
• Place your fax machine on a firm, solid surface. If you place
the fax machine on something unsteady, it may fall and
become damaged or injure someone. If you place the fax
machine on a soft surface, such as a rug, sofa, or bed, the
vents may become blocked causing the fax machine to
overheat.
• Do not use your fax machine near water, or spill liquid of
any kind into it.
Installation hints
•
Install your fax machine in a dust-free location away from
direct sunlight.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not connect your fax machine to a power source that is
used by other equipment producing electrical noise (i.e., air
conditioners, etc.).
• Leave electronic adjustments to authorized service
personnel.
• If the fax machine is sharing the line with another piece
telephone equipment, the audible alarms of the other
equipment MAY trigger the ring detector of the fax.
Likewise, the audible alarms of the fax may trigger the ring
detectors of the other equipment.
• Please note that this fax machine does comply with Machine
Noise Information Ordinance 3. GSGV 18.1.1991 where the
maximum sound pressure level is equal or less than 70 dB
(A) according to ISO 7779.
• The LINE port connects your fax machine to a standard
telephone line. To avoid damage to your telephone system or
to the fax machine, do not connect your fax machine into
anything other than a standard telephone socket.
• Your fax machine has an earthed, 3-pin plug as a safety
feature an it will only connect to an earthed outlet. If you
cannot connect this plug to your power outlet, then it is
possible that you have an older, non-earthed outlet. Contact
an electrician to have your power outlet replaced. Do not use
an adapter to defeat the earthing.
Operation & Maintenance
• Use a dry cloth to clean the control panel and the main body
of the unit.
• Aside from the instructions specifically mentioned in this
User’s Guide, your fax machine is not user serviceable. DO
NOT attempt to service the machine or lubricate moving
parts by yourself.
• The electrical power outlet should be located near the fax
machine and should be easily accessible.
• Disconnect the power cable before trying to remove any
objects that may have fallen into the machine.
• Immediately disconnect the fax machine if it becomes
physically damaged and arrange for its repair or disposal.
• When relocating your fax machine, always disconnect the
telephone line before disconnecting the power cable. When
reconnecting your fax machine, connect the power cable
first, then the telephone line.
• The TEL ports on the back of the fax machine are only
suitable for 2 wire devices. Not all standard telephones will
respond to incoming ringing when connected to an extension
socket.
• This fax machine may not necessarily provide an effective
handover of a call from a telephone connected to the same
line.
• This fax machine is designed for use with tone dial
telephones and has a parallel pick-up feature with remote
receive.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• IF TONER GETS IN THE EYES: Flush eyes with large
quantities of cool, NOT cold, water for a minimum of 15
minutes keeping eyelids open with fingers. Seek medical
attention.
Toner Cartridge & Image Drum Handling
• Leave unused toner cartridges and image drum units in their
packages until needed. When replacing a toner cartridge or
image unit, reuse the packaging to dispose of the old toner
cartridge or image drum unit.
• Do not expose the toner cartridges and image drum units to
light for more than five minutes. Never expose the green
drum (inside the image drum unit) to direct sunlight.
• Always hold the image drum unit by the ends - never by the
middle. Never touch the green drum inside the image drum
unit.
• To avoid damage to the image drum unit, always use OKI
toner cartridges.
• Exercise care when removing the toner cartridge. Do not let
it touch your clothing or porous materials. The toner powder
causes permanent stains.
• Small amounts of toner spilled on skin or clothing can be
readily removed with soap and cold water. Using heated
water will make removing the stain much more difficult.
Emergency First Aid
• IF TONER IS SWALLOWED: Induce vomiting and seek
medical attention. Never attempt to induce vomiting or give
anything by mouth to a person who is unconscious.
• IF TONER IS INHALED: Take the person to an open area
for fresh air. Seek medical attention.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Reports to help you keep track of your fax machine’s
operations and settings.
• Automatic power save mode.
Introduction
• Answering modes for manual and automatic fax reception,
automatic switching between incoming voice and fax
messages. Also allows an answering machine to be
connected in series to the telephone line after the fax
machine.
• A closed network feature to allow you to limit who can send
faxes to your fax machine, or to limit both where faxes can
be sent to and received from.
Features
Your fax machine includes all the following features:
• 40 One-Touch keys for automatic, single-key dialing of pre-
programmed telephone numbers.
• 150 Auto Dial numbers for automatic dialing of additional
pre-programmed telephone numbers.
• Group programming (20 groups) that enables transmission
of a document to multiple locations with a single selection.
• A search feature allowing you to look for pre-programmed
telephone numbers by name.
• Halftone transmission in up to 64 shades of gray.
• High-speed fax transmission and reception at up to 33600
bits per second.
• 16 mail boxes for confidential reception or bulletin polling.
• Automatic redial and page re-transmission when a telephone
number is busy or when problems occur in communication.
• Advanced transmission and reception features, including up
to 20 delayed transmissions, transmission to multiple
locations, confidential transmission and reception, relay
broadcast initiate and polling.
• Your fax machine can also make up to 99 sorted copies of an
original document using standard weight (75 g/m2, 20 lb.)
paper.
• 2.5 Mbytes of built-in memory.
• An advanced dual access feature which allows you to load
and prepare multiple documents for transmission while your
fax machine is sending or receiving another message.
• High-speed scanning of original documents.
• A manual paper tray to allow you to load a different type of
paper while making copies. Paper size is dependent on 1st
paper size setting.
• A fax forwarding feature to allow your fax machine to
receive messages into memory and automatically forward
the messages to another remote fax machine.
• Advanced memory transmission and reception features,
including automatic reception into memory.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not make any adjustments other than those outlined in
this user’s guide as damage may be caused to the machine.
• The machine employs a grounded plug as a safety feature,
and it will only fit into a grounded outlet.
Safety Instructions
• If you cannot plug it in, you probably have an older, non-
grounded outlet; contact an electrician to have the outlet
replaced. Do not use an adapter to defeat the grounding.
This machine has been carefully designed to provide years of
safe, reliable performance. As with all electrical equipment,
however, there are a few basic precautions that should be taken to
avoid personal injury or damaging the machine:
• Read this guide carefully and save it for future reference.
• Read and follow all warning and instruction labels on the
machine itself.
• Disconnect the machine before cleaning. Use only a damp
cloth. Do not use liquid or aerosol cleaners to clean the
machine.
• Do not use the machine near water, or spill liquid of any kind
into it.
• Make sure that the power source matches the rating listed on
the back of the machine. If you are not sure, check with your
dealer or with your local power company.
• To avoid damaging the power cable, do not put anything on
it or place it where it will be walked on. If the cable becomes
damaged or frayed, replace it immediately.
• The power outlet into which the machine is connected must
remain accessible at all times.
• Aside from the routine maintenance described in this user’s
guide, do not try to service the machine yourself. Opening a
cover may expose you to shocks or other hazards.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Options
Components
What you should receive:
Memory Expansion
Document Stacker
Installing additional memory allows the fax machine to store
more pages of information in memory. If you are constantly
seeing a MEMORY OVERFLOW message on your fax machine, you
should consider purchasing additional memory. An optional 2.0/
4.0/8.0 Mbyte memory expansion board is available. See “Part
Numbers” on page 101 for the expansion kit part number.
Power Cable
Fax Machine
The memory expansion board option includes a built-in backup
battery.This feature protects memory operations and other
communication settings for up to 20 hour in the event of a power
failure.
Telephone Cable
Second Paper Cassette
The second paper cassette option adds an additional 500 pages of
paper capacity to your fax machine. When the main paper
cassette runs out of paper, your fax machine automatically
switches to the second paper cassette to continue printing
received faxes or copies. See “Part Numbers” on page 101 for
the part number.
Image Drum Unit
(inside fax machine)
Toner Cartridge
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The following are not pictured but also included:
2. Document Table: Covers the copy stacker and holds
original documents that are to be faxed or copied.
• User’s Guide
3. Document Table Extension: Flips out to support longer
• Warranty, Regulatory, and Safety Information
documents that are to be faxed or copied.
Note: If any items are missing, contact your dealer immediately.
Keep your packing materials and carton in case you ever
need to ship or transport the unit. Refer to “Shipping the
Fax Machine” on page 73 for more information.
4. Copy Stacker: Holds copies or received faxes.
5. Front Panel: The panel on the front of the fax machine
gives you access to the manual paper feeder. This allows you
to bypass the paper cassette and feed paper directly into the
machine. Use this feature when you want to use a different
type of paper.
Component Identification
6. Copy Stacker Extension: Slide this tray out to help
support copies or received faxes.
7. Paper Cassette: Holds up to 250 sheets of paper.
8. Paper Indicator: Indicates how much paper remains in the
paper cassette.
9. Power Switch: Press the | to turn ON the fax machine and
the O to turn OFF the fax machine.
10. Document Guides: Adjust these guides to the page width
of the documents that are to be faxed or copied.
11. Control Panel: See “Control Panel & Indicators” on
page 10 for further information.
12. Document Stacker: Holds your original documents after
they have been faxed or copied.
13. Paper Path Icon: Load documents face down here.
1. One-Touch Keypad
8
Download from Www.Somanuals.com. All Manuals Search And Download.
19. Image Drum Unit: The image drum unit contains the
photosensitive drum, which receives images from the LED
print head and transfers these images to the printing paper.
14
18
17
C
S
U
E
S
I
R
S
A
L
A
D
N
E
I
16
19
15
14. AC Power Socket: Connect the power cable supplied with
21
your fax machine into this socket.
15. Cable Run: When installing the optional external handset,
feed the telephone line through this line run to TEL
terminals.
20
20. Toner Cartridge: This black cylinder, installed inside the
image drum unit, contains black powder, which acts as the
ink for your fax machine.
16. TEL Terminals: Terminals for connecting an external
handset, external telephone, or answering machine to the fax
machine.
21. LED Print Head: This black bar is the part of your fax
machine, that transfers received or copied images onto the
image drum unit. Clean this bar each time you change a
toner cartridge.
17. LINE Terminal: Terminal for connecting the fax machine to
a telephone line.
18. Expansion Slot Cover: Open this cover for access to
expansion slots for Network interface board and memory
expansion boards
9
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also use this key while programming to create
numbers with mixed pulse-then-tone operations.
Control Panel & Indicators
8 7 65
910
18 19
4. 0/Unique Key: When dialing, use this key to enter a “0”.
When programming your Sender ID or a Location ID, you
can use this key to enter a variety of unique characters, e.g. 0
! # & ‘ ( ) * + , - . / : ; = ? · @ \ “ _ % ˜ ä ß ñ ö ü Æ Å Ø æ å ø.
1/CAPS
2/AB
7/KL
3/CD
4/EF
5/GH
6/IJ
8/MN
9/OP
10/QR
1
11/ST
12/UVW
13/XYZ
18/+
14/@
15/.
5. Select Function Key: Using this key activates the
advanced transmission and reception functions, to obtain
reports and for programming. To select a function, press the
Select Function key, and then press the One-Touch key
labeled with the function you want to use. When
programming or selecting other functions, pressing the
Select Function key a second time returns you to the stand-
by mode.
16/DEL
17/PAUSE
19/HYPHEN
20/UNIQUE
e-mail
OKI
5680
2
3
4
11 12 13 14
15 16
17
6. Auto Dial Key: Auto Dial numbers are abbreviated numbers
for rapid dialing. Rather than dialing the entire telephone
number, you can enter a 3-digit code number to
1. LCD Panel: Refer to this liquid crystal display (LCD) panel
for instructions and information while operating or
programming your fax machine.
automatically dial a number instead. You can also use the
Location IDs (names) associated with Auto Dial numbers to
search for these locations by name using the Search key.
2. Numeric Keypad: When dialing, these twelve keys work
like the keypad on a telephone. You will also use the keypad
to enter numbers, letters, and other characters while
7. Hook/V. Request Key: During a fax communication,
pressing this key alerts the operator at the other fax machine
that you wish to talk at the end of your transmission or after
reception of any page has been completed. To use this
feature both fax machines must have either the external
telephone handset or an external telephone connected. To
answer a voice request, press this key after lifting your
telephone handset. When no fax communication is taking
programming. After pressing the Search key, you can also
use the numeric keypad to alphabetically search for the
names of locations programmed into your fax machine.
3. */
Key: If your fax machine is set to pulse dialing, this
key allows you to switch the dialing operation of your fax
machine from pulse to tone dialing during your current call.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
place, pressing this key opens the telephone line for manual
dialing (not available in some countries). You will hear the
dialing tone through the speaker of your fax machine.
12. Redial Key: Pressing this key manually redials the last
number dialed on your fax machine.
13. Type of Original/NO key: This key selects the document
contrast after loading a document for transmission. Use
LIGHT for originals that are too light, NORMAL for
documents with good contrast, and DARK for originals that
are too dark. You can also use the NO key when making
selections or to move your cursor to the right while
programming.
8. Auto Rec Key: This key sets the answering mode (auto
receiving, manual receiving, memory receive, TEL/FAX
automatic switching, TAD interface and forwarding) of your
fax machine. The answering mode controls how your fax
machine answers incoming calls and receives faxes. The
display of your fax machine will always indicate your
current selection. See “Setting Answering Mode” on page 23
for more information about the answering modes available
in your fax machine.
14. Copy Key: After loading a document, press this key to make
a copy. When no documents are loaded, press this key once
to obtain a Message Confirmation Report about your last
transmission on the LCD Display Panel and a second time to
receive a printed report. You can also use the Copy key as a
short cut for programming One-Touch keys and AUTO
DIAL numbers. After you have manually entered a
telephone number, press Copy so you can instantly program
that number into an unassigned One-Touch Key or AUTO
DIAL number.
9. Search Key: One-Touch keys and Auto Dial numbers can
be programmed to have a name or location ID associated
with their telephone numbers. Using this key by itself or in
combination with the numeric keypad, you can search for
these numbers alphabetically.
e-mail
10. E-mail Key: Pressing this key
allows you to perform
e-mail operations. See “I-Fax” on page 78 for details.
15. Alarm Indicator: This indicator turns on (red) and an alarm
sounds to notify you of any problem that occurs. To turn the
alarm indicator off, press the Stop key and correct the
problem.
11. Transmit Resolution/YES key: This key changes the
resolution used for transmitting documents. Use STD for
standard originals, FINE and EX.FINE for detailed or small
print originals, and PHOTO for originals that include colors
or many shades of gray. You will also use the YES key when
making selections or to move your cursor to the left while
programming.
16. Stop Key: This key cancels any operation currently in
progress and turns off the Alarm Indicator. During
programming, pressing the Stop key returns you step-by-
step through the programming functions you have already
selected.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Pause Key (One-Touch key 17): Use this key on the
One-Touch keypad to enter automatic 3-second pauses in
dialing when programming telephone numbers. For exam-
ple, you may want to use this key to tell your machine to wait
for an outside or international line to open. Pauses in tele-
phone numbers are marked by a “P” symbol.
17. Start Key: Pressing the Start key initiates the operation
indicated on the display or confirms information you have
entered into the display. While the fax machine is in power
save mode, press the Start key to exit power save mode.
Note: The fax machine also exits power save mode if a
document is placed on the document feeder, the handset is
lifted, or if there is an incoming fax message.
• Plus Key (One-Touch key 18): Each fax number you
enter or program into your fax machine can be up to 40 digits
long. In the case that you need to dial a number which is
longer than 40 digits, it is possible to dial a number using
any combination of One-Touch keys, Auto Dial numbers or
the numeric keypad. When programming a chain dial num-
ber into a One-Touch key or Auto Dial number, press the
Plus key at the end of the first part of the number to indicate
to the fax machine that this is a chain dial number.
18. One-Touch Keypad: The One-Touch keys are an important
tool on your fax machine. You will use them for quick, One-
Touch dialing, and to access the functions and programming
options of your fax machine. For a description of all the
functions, including the special characters assigned, of the
One-Touch keypad, see below. Important key descriptions
are listed below:
• Caps Key (One-Touch key 1): In character string input,
when Caps is showing on the LCD display panel, pressing
this key allows you to make a case shift.
19. One-Touch Labels: After programming a location into a
One-Touch key, write the name of the location on the One-
Touch label. Lift off the plastic cover and use a pencil to
write in the name, then replace the cover.
• Space Key (One-Touch key 36): Use this key on the
One-Touch Keypad to enter spaces while programming.
Unlike the Pause key, spaces are used for easier reading
only and have no effect on dialing.
One-Touch Dialing
To use a One-Touch key for dialing, just press the appropriate
One-Touch key. For each key, you may program up to two tele-
phone numbers: a primary number, which will always be dialed
first, and an alternate number which will be automatically
dialed if the first number is busy or if there is no answer.
• Delete Key (One-Touch key 16): In character string and
numeric string input, by pressing this key, the character the
cursor is sitting under is deleted and the right character string
of the cursor is moved to the left.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also use the Location
IDs (names) associated with
One-Touch keys to search for
these locations by name using
the Search key. There are 40
One-Touch Keys available for
programming. To access One-
Touch keys 21-40, grasp the
One-Touch keypad latch and
swing the main One-Touch
runs low on toner. Using this key you can also force
messages to print when toner is low, but print quality may be
poor. Using this key prints out confidential fax messages
received into mailboxes in the memory of your fax machine
after entering the correct password. If memory reception
mode is set on your fax machine, use this key to print faxes
that have been received in memory. Also use this key to print
any bulletin polling messages that have been stored in
memory for transmission.
3. Confidential TX Key: This key sends a confidential
document to a personal mailbox (a memory storage area) in
the receiving fax machine.
panel up and out of the way.
When you are finished, close
the One-Touch keypad to
4. Relay Initiate TX Key: This key sets up a relayed fax
transmission. During a relayed fax transmission, your fax
machine initiates the transmission by sending a document to
a second fax machine, which then broadcasts the message to
a number of other fax machines.
continue with other options and programming.
One-Touch Keys for Selecting Functions &
Programming
You will also use One-Touch keys 1 to 10 for selecting special
transmission and reception functions, obtaining reports and pro-
gramming.
5. Polling Key: When a document is loaded on the document
table, use this key to set your fax machine to wait for another
fax machine to call and request the document to be sent
(polling transmission). When no document is loaded on the
document table, using this key calls another fax machine and
requests it to send the documents it has loaded (polling
reception).
• To select a function from the One-Touch keypad, press the
Select Function key, and then press the corresponding
One-Touch key.
1. Delayed TX Key: This key programs to send a fax at a later
time and date which you can specify for up to three days
later.
6. Report Print Key: This key manually prints reports from
your fax machine.
2. Print Operation Key: Your fax machine can be set to
receive messages into memory and not print them when it
13
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Counter Display Key: Your fax machine keeps track of the
number of pages it has printed and scanned. Using this key
checks the print counters of your fax machine and resets the
drum counter of your fax machine after replacing the image
drum unit.
• Error Tones: If you press a wrong or inappropriate key,
your fax machine will emit three short beeps. If your fax
machine experiences a problem during communications, it
will emit three long beeps. Press the Stop key to turn the
error tone off, then print a Message Confirmation Report to
check the source of the problem by pressing the Copy key
twice with no documents loaded.
8. Location Prog Key: This key programs One-Touch keys,
Auto Dial numbers and groups into your fax machine.
• Voice Request Tone: During a fax session, either you or
the person at the remote fax machine may initiate a voice
request. When the person at the remote fax machine either
initiates or answers your voice request, your fax machine
emits a repetitive warbling sound.
9. User Prog Key: This key allows you to program
identification information; set the clock; set forwarding
telephone number; set up mail boxes for confidential
reception or storing bulletin polling messages; and to change
the function and dial parameter settings of your fax machine.
• End of Session Tone: At the end of every successful fax
session, your fax machine emits a long beep to inform you
that there were no errors or problems in the communication.
• Off-Hook Alarm Tone: If your fax machine is equipped
with a handset and if the handset is left off the hook, your fax
machine will emit an intermittent warbling sound. To turn
off the sound, hang up the handset or press the Stop key.
10. Printer Cleaning Key: This key prints to print a cleaning
page to clear accumulated toner from your fax machines
image drum.
Signal Tones
Your fax machine emits a number of sounds to inform you of
specific conditions.
• Key Select Tone: This is a short beep that occurs each time
that you press a key.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
removing the items from the carton, place them on a sturdy sur-
face.
Installation
– Fax machine unit
– Toner cartridge
– Image drum unit (inside facsimile unit)
– Power cable
– Telephone line cable
– Paper tray/Copy stacker
– This User’s Guide
Getting Started
To install your new fax machine, follow the instructions for the
steps from Unpacking (below) to “Fax Machine Identification”
on page 25. You must complete these steps for your fax machine
to operate properly. If you have purchased an option package for
your fax machine, refer to the documentation you received with
that option.
Note: If any items are missing, notify your dealer immediately
for a replacement. Keep your packing materials and
carton in case you ever need to ship or transport the
machine.
Where to install your fax machine
– Install your fax machine in a dust-free location away from
direct sunlight.
– Allow several inches on each side of the fax machine to ensure
adequate ventilation.
CAUTION: Do not ship the fax machine with the image
drum unit and toner cartridge installed. Refer to “Ship-
ping the Fax Machine” on page 73.
– Make sure there are both power and telephone outlets nearby.
– Choose a location where the relative humidity is between 20%
and 80%, and where the temperature is between 10°C/50°F
and 32°C/90°F.
Unpacking
Before you begin, be sure that all the items listed below are
included in your package. Refer to the illustrations in “Compo-
nent Identification” on page 8 to identify the items. After
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Toner Cartridge
1. Lift the document table into an upright position.
Setting Up
Installing Document Stacker
T
N
L
T
CH
D
R
H
O
.
R
IN
IH
O
1. Slip the document stacker indents over the tabs on the rear of
the unit. You will feel them lock into place.
2. Press in the cover release buttons on the sides of the copy
stacker until you hear a click. Lift the copy stacker.
T
O
S
I
E
U
I
R
Q
V
I
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Lift the image drum unit out, keeping the image drum unit
out of direct sunlight. DO NOT touch the green surface of
the drum.
down firmly on both of the locations on the image drum
marked “PUSH.”
E T
SE
FU
REC
A
AUT
DI
T
REDAL
.
I
COPY
T
R
A
I
Y
O
E
D
M
G
F
USH
P
USH
P
H
S
PU
H
S
PU
6. Remove the protective foam cylinder from the toner well in
the image drum unit.
4. Carefully remove the protective sheet from the image drum
unit.
I
I
I
5. Place the image drum unit back into your fax machine. To
ensure that the image drum is positioned correctly, press
7. Remove the toner cartridge from its package and gently
shake it from side to side to distribute the toner. Then
17
Download from Www.Somanuals.com. All Manuals Search And Download.
carefully peel the white plastic tape from the bottom of the
toner cartridge.
I
L
I
R
L
I
N
L
H
R
N
H
I
9. Once the toner cartridge is in place, push the colored lever
all the way forward to secure it and release the toner.
WARNINGs
Be careful when handling the toner cartridge. Do not let toner
spill onto your clothing or other porous materials. If you
experience any problems with toner, refer to the safety
instructions at the beginning of this User’s Guide.
F
S
S
L
E
A
E
P
A
A
X
8. With the ridged side facing up and the colored lever on your
right, insert the toner cartridge into the image drum unit.
Slide the left end of the cartridge in first, and then lower the
right end into place.
10. Close the copy stacker until you hear the copy stacker click
into place. Be sure that the cover is latched on both sides.
11. Close the document table.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Telephone Line
2. Position the handset cradle on the left side of the fax
machine.
1. Insert one end of the telephone cable into the LINE terminal
at the back of the machine.
2. Insert the other end of the telephone cable into your wall
telephone socket.
Note: An external telephone or optional external handset can be
connected to the fax machine. See the instructions below.
3. Plug one end of the handset cable into the handset. Then
plug the other end of the handset cable into the socket
located on the front of the cradle. Place the handset in the
cradle.
Installing External Handset
If you purchased an optional external handset with your fax
machine, follow these instructions to install it.
4. Feed the telephone cable from the back of the cradle through
the cable run located on the back of the fax machine.
1. Insert the supplied telephone cable into the socket located on
the bottom of the cradle and feed the cable to the back of the
cradle.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Insert the other end of the telephone cable into the TEL
sockets on the back of the fax machine.
Connecting Power
1. Make sure the power switch is in the OFF position (the O on
the switch should be pressed down).
Connecting External Telephone or Answering Machine
1. Insert one end of the telephone cable into the TEL terminals
on the back of the machine.
2. Insert the other end of the telephone cable into the socket in
your external device.
2. Insert the power cable into the power inlet socket located on
the back of the fax machine.
Note 1:To connect both an answering machine and a telephone,
first connect your answering machine to your fax
machine, then insert the cable of your external telephone
into the telephone socket on your answering machine.
Note 2:You will need to have the TAD mode feature turned on for
an answering machine to work with your fax machine. See
“Setting Answering Mode” on page 23 in Installation.
3. Connect the unattached end of the power cable into an
earthed AC power outlet.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Turn the power switch on (the I should be pressed down).
Your fax machine will take a few moments to warm up.
Loading Paper
Your fax machine can hold up to 250 sheets of standard-weight
2
5. The time and current answering mode will appear on the
display. Your fax machine is now in standby mode, ready to
send or receive faxes.
(75 g/m , 20 lb.) paper. Available sizes are A4, letter size and
legal size.
Your fax machine automatically reduces the vertical length of the
page images it receives to fit on the paper loaded in your fax
machine (down to 75% of the original length). For example, if a
document created originally on legal-size paper is received, your
fax machine reduces the received pages to fit on A4 or letter-size
paper.
Paper
Paper Types
The manufacturer of this fax machine recommends the follow-
ing guidelines when selecting paper for use in your fax
machine:
Note: Your fax machine is set at the factory to use letter-size
paper. If you intend to use a different paper size, change
the 1’ST PAPER SIZE user function setting to match your
new paper size. See“Customizing Features &
– Paper should be stored flat and away from moisture, direct
sunlight and heat sources.
– It is recommended to use a smooth finished paper such as
copier or laser type paper with a Sheffield (smoothness) rating
of 250 or less. If in doubt, please ask your paper dealer.
Operations” on page 53 later in this User’s Guide.
1. Pull the paper cassette out of the fax machine.
– The use of heavily laid or textured paper will seriously impact
the life of the image drum.
– Do not use very smooth, shiny/glossy paper.
– Do not use heavily embossed headed paper.
– Avoid printing on both sides and putting paper through the fax
machine twice.
– Avoid using paper with perforations, cut outs and ragged
edges.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Adjust the paper guides to the width of your paper.
4. If you are using legal size paper, pull out the extension at the
back of the paper cassette.
3. If necessary, lift and adjust the vertical paper guide for the
length of your paper.
5. Remove the paper from its wrapper (up to 250 sheets). Note
the “Print side” notice printed on the label. Fan the paper.
6. Load the paper into the cassette, print side down.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Be sure the paper is under the tabs at the left and right
edges of the cassette. Do not fill past the Paper Full
marker. If necessary, readjust the guides for a snug (but
not tight) fit.
Setting Answering Mode
Your fax machine has a number of answering modes, which
determine how it handles incoming calls (both fax and voice).
The current answering mode appears on the LCD panel of your
fax machine.
7. Return the tray to the slot. Push it forward until it locks.
Setting Time & Date
Answering Mode Options
Follow these instructions to set the time and date on your fax
The answering mode which is best for you will vary depending
on how you use your fax machine and what external telephone
devices are connected to it. Read through the answering modes
listed here, then follow the instructions below.
machine.
SELECT
FUNCTION
9/OP
3:CLOCK ADJUSTMENT
YES ( ) NO( /1-9)
DEF
YES
3
USER
PROG.
Auto Receive Mode [FAX]
1. Press the Select Function key.
If your fax machine is connected to a telephone line reserved
only for fax communications, use the Auto Receive mode. Your
fax machine will assume all incoming calls are fax messages
and automatically receive all incoming fax messages.
2. Press the 9/User Prog. One-Touch key.
3. On the numeric keypad, press 3. The display will show
3:CLOCK ADJUSTMENT.
4. Press the YES key. The display will show the currently set
Manual Receive Mode [TEL]
date and time.
If you use the same line for both fax and telephone calls and the
majority of your incoming calls are telephone calls, then the
TEL answering mode is your best choice. Each time someone
calls, your fax machine rings like a telephone. You can answer
from either an external handset or from an external telephone
connected to your fax machine. If you pick up the handset and
hear fax machine CNG tones (normally a short peep every three
seconds), press the Start key to receive the fax. If you do not
5. Using the numeric keypad, enter the new date and time.
6. Press the YES key to confirm your entry.
7. Press the Select Function key to finish.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
answer the telephone and someone tries to send you a fax mes-
sage, your machine will not accept it.
your answering machine activates and is ready to send out your
recorded outgoing message. At the same time, your fax
machine monitors the incoming call to check if the call is a fax
or voice call. If the incoming call is a fax call, your fax machine
will receive the fax and no voice message will be recorded on
your answering machine. If the incoming call is a voice call,
then your fax machine will not activate and the calling party
will be able to leave a voice message on your answering
machine.
Note: Some older types of fax machines do not send CNG tones
and the line may be silent when you answer a call in TEL
answering mode.
If you answer a call using a telephone connected to the
same telephone line, but not connected directly to your
fax machine, you can remotely tell your fax machine to
start fax reception by entering a two digit remote receive
number using the telephone keypad. See Remote Receive
on page 55 in Programming later in this User’s Guide.
Note: In some countries, the Telephone Answering Device mode
is normally turned off. To have it turned on, contact your
dealer.
Telephone/Fax Auto Switch Mode [T/F]
When incoming calls are a mixture of fax and telephone calls,
your best choice is the Telephone/Fax Auto SW mode. In this
mode, your fax machine detects whether the incoming call is a
fax or voice call. When the call is from another fax machine,
your machine will switch to fax mode and receive the mes-
sage.When the call is a voice call, your fax machine will ring
like a telephone. If you do not answer, your fax machine will
switch back to fax mode to allow the calling party to manually
send a fax.
Memory Reception Mode [MEM]
Use this answering mode if you want incoming faxes to be
stored in the memory of your fax machine and not immediately
printed. You can then use the 2/Print Operation One-Touch
Key print operation to print out any messages that have been
stored in memory.
Fax Forwarding Mode [FWD]
When set to this mode, your fax machine receives all fax mes-
sages into memory, and then automatically re-sends the fax
messages to the forwarding number programmed into your fax
machine. For information on setting the forwarding number,
refer to “Setting Forwarding Number” on page 27 in Installa-
tion.
Note: Only use this mode if the telephone is located close to
your fax machine. After the initial ring, the telephone falls
silent, but the fax machine continues ringing.
Telephone Answering Device Mode [TAD]
Use this mode if you have connected an answering machine to
your fax machine. When a call is received and is not answered,
24
Download from Www.Somanuals.com. All Manuals Search And Download.
is printed at the top of every fax you send. You can enter up to
32 characters. The first 16 characters of your Sender ID will
also be used as your Personal ID, which may appear on the dis-
plays or reports of other fax machines with which you are com-
municating.
Changing Answering Mode
Follow these instructions to change the answering mode on your
fax machine.
1. Press the Auto Rec key. Your fax machine
AUTO REC
displays your current answering mode.
Note: Some fax machines do not print your TSI/CSI on their
received pages. To make sure that your TSI/CSI is always
printed, you can include your fax number as part of your
Sender ID.
2. Press the Auto Rec key again. Your fax
machine switches to the next answering mode.
3. Continue pressing the Auto Rec key until the desired
answering appears on the display. After a short pause, your
fax machine programs the new answering mode and returns
to standby mode displaying the new answering mode setting.
Call Back Number
The Call Back Number is a telephone number (not a fax num-
ber) which the operator of the remote machine can use to reach
you. If you use the voice request function while you are trans-
mitting to another fax machine and no one is there to answer,
your fax machine will automatically send a cover letter with a
call back message. The call back message is printed on a sepa-
rate sheet with the message “Please call back” and a telephone
number where you can be reached. The call back number
entered here is the number that appears on the call back mes-
sage.
Fax Machine Identification
Fax machines use the information you will enter here to identify
themselves during communications. In most countries
programming this information into your fax machine is a legal
requirement. The information you will enter here includes:
TSI/CSI
This is the telephone number of your fax machine. This number
appears on displays and reports of other fax machines with
which you communicate. This number may also be printed at
the top of faxes you send to other fax machines.
Setting Fax Machine Identification
SELECT
9/OP
FUNCTION
NO=<TSI/CSI>
ID=<SENDER ID>
GHI
YES
4
USER
PROG.
Sender ID
This is a descriptive title and is usually the location of your fax
machine or the name of your company or office. The Sender ID
1. Press the Select Function key.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the 9/User Prog. One-Touch key. The display shows
To do this
Use
1:FUNC.PROGRAMMING.
Enter alphabet characters
Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears. It
is also possible to input characters using One Touch
key.
3. On the numeric keypad, press 4. The display shows
4:SYSTEM DATA PRG.
4. Press the YES key. The display shows NO=<TSI/CSI>,
Enter unique character
Press the 0/Unique key repeatedly until the character
you want appears. The following characters are
available:
ID=<SENDER ID>.
5. After the display clears, enter the full telephone number of
your fax machine using the numeric keypad.
! # & ‘ ( ) * + , - . / : ; = ? · @ \ “ _ % ˜ ä ß ñ ö ü Æ Å Ø
æ å ø.
Note: Use the 18/+ One-Touch key to enter a “+” character
before the number, which is the generally recognized
method of indicating the international access code before
the country dialing code. The 36/Space One-Touch key
is used to enter spaces in a number.
Note: Some unique characters can be entered using
one-touch keys.
Move the cursor to make
corrections
YES and NO keys.
8. Press the Start key to save your entry. The display shows
6. Press the Start key to save your entry.
NO=<CALL BACK NO.>.
7. Enter your Sender ID. This is a descriptive title up to 32
characters long. Refer to the instructions below.
9. After the display clears, use the numeric keypad to enter the
telephone number you want to use for call back messages.
Enter up to 20 characters.
To do this
Use
10. Press the Start key to save your entry.
Enter Numbers
Enter Spaces
Enter Hyphens
Enter Pause
Enter Plus
Delete
Numeric keypad (press once)
Space One-Touch key
Hyphen One-Touch key
Pause One-Touch key
Plus One-Touch key
11. Press the Select Function key to finish.
Delete One-Touch key
Caps One-Touch key
Caps
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To do this
Use
Setting Forwarding Number
9/OP
Add a switch from pulse to */Tone key
tone dialing for part of the
call
SELECT
FUNCTION
FORWARDING NO.
MNO
YES
6
USER
PROG.
Move the cursor to make
corrections
YES and NO keys.
When the answering mode of your fax machine is set to Fax
Forwarding [FWD], it will receive fax messages into memory
and then automatically resend the faxes to the number which you
enter here.
6. Press the Start key to save your entry.
7. Press the Select Function key to finish.
Setting Language
FUNCTION
YES
1. Press the Select Function key.
SELECT
9/OP
GHI
2. Press the 9/User Prog. One-Touch key. The display shows
14: USER LANGUAGE
[ENG.] YES ( ) NO ( )
1
4
1:FUNC.PROGRAMMING.
USER
PROG.
3. Using the numeric keypad, press 6. This display shows
Your fax machine comes with some languages (English and
other) installed, which appear on the display and in reports.
Follow the instructions below to switch languages.
6:FORWARDING NO. PRG.
4. Press the YES key. The display will show FORWARDING NO.
5. Enter the fax number to which you want your messages
forwarded.
Note: Your dealer may be able to provide you with additional
languages.
To do this
Use
1. Press the Select Function key.
Enter Numbers
Numeric keypad. Press once for each number
required.
2. Press the 9/User Prog. One-Touch key. The display shows
1:FUNC.PROGRAMMING.
Enter Spaces
Space One-Touch key
Hyphen One-Touch key
Enter Hyphens
3. Press the YES key. The display shows FUNCTION NO. [ ].
Enter Pause (i.e., to wait for Pause One-Touch key
long distance or outside
lines)
4. Using the numeric keypad, enter 14. The display shows
14:USER LANGUAGE.
5. Press the NO key to switch to the other installed language.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6. To accept the language change, press the YES key.
4. Press the YES key until the display shows PBX LINE / [OFF].
7. Press the Select Function key to finish.
5. Press the NO key. The display changes to PBX LINE / [ON].
6. Press the YES key until the display shows DIAL PREFIX /
Connecting to a PBX
9/OP
ABC
[OFF].
SELECT
FUNCTION
7. Press the NO key. The display changes to DIAL PREFIX / [ ]
PBX LINE
[ OFF ] YES ( ) NO ( )
YES
ENTER 4DIGITS.
2
USER
PROG.
8. Using the numeric keypad, enter the number you normally
dial from your PBX to obtain an outside line.
A PBX (Private Branch Exchange) is a private telephone system
used to route internal calls. If you have to dial a prefix (access)
number to get an outside line, then your line is connected to a
PBX. If you are connecting your fax machine to a PBX, follow
the instructions below. These setting changes allow your fax
machine to identify the numbers of the prefix digits required to
dial an outside line on your PBX. After it dials the prefix digits,
your fax machine will wait until it sees that the outside line is
available before dialing the rest of the number.
9. Press the YES key and then the Select Function key to
finish.
Note: The DIAL PREFIX number of your PBX LINE must be
included in all outside telephone numbers you program
into your fax machine or dial with the numeric keypad.
To later turn off the PBX LINE and DIAL PREFIX
functions, follow Steps 1 - 7 above. At Step 8, press the
Space key four times, then continue with Steps 9 - 10.
Note: In some countries you may require service assistance to
make these changes. Also, some PBX installations may
require additional adjustments to your fax machine. If you
continue to have difficulty with fax communication after
following these steps, contact your dealer.
1. Press the Select Function key.
2. Press the 9/User Prog. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
3. On the numeric keypad, press 2. The display shows 2:DIAL
PARAMETER.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: To program or use One-
Touch keys 21 to 40, grasp
the One-Touch keypad
latch and swing the main
One-Touch panel up and
to the right. You can then
select from One-Touch
keys 21 to 40. When you
are finished, close the
One-Touch keypad to
continue.
Dial Directories
One-Touch Keys
Programming One-Touch Keys
SELECT
FUNCTION
L
8/MN
LOCATION PROGRAMMING
ENTER (SRCH, OT, A/D, #)
To find One-Touch keys
LOCATION
PROG.
which are not yet programmed, you may repeatedly press
the Search key in Step 2 below. If all your One-Touch keys
are programmed, searching automatically looks for the
first unassigned Auto Dial number.
Your fax machine has 40 One-Touch keys for rapid dialing. You
can store up to two fax numbers with 40 digits on each One-
Touch key, a main number and an alternate number. The alternate
number is used if the main number is busy or does not answer.
You can also enter a 15 character Location ID (name) for each
One-Touch key or an email address. Refer to “Email Using OT
Key” on page 95 for further details.
1. Press the Select Function key, then press the 8/Location
Prog. One-Touch key. The display shows LOCATION
PROGRAMMING.
2. Press a One-Touch key to program and the display briefly
shows NO=<FAX NO.>, ID=<LOCATION ID> or a previously-
programmed fax number and Location ID.
3. Enter the main fax number as follows:
To do this
Use
Enter Numbers
Numeric keypad. Press once for each number
required.
Enter Spaces
Space One-Touch key
Hyphen One-Touch key
Enter Hyphens
29
Download from Www.Somanuals.com. All Manuals Search And Download.
To do this
Use
To do this
Use
Enter Pause (i.e., to wait for Pause One-Touch key
long distance or outside
lines)
Enter unique character
Press the 0/Unique key repeatedly until the character
you want appears. The following characters are
available:
Add a switch from pulse to */Tone key
tone dialing for part of the
call
! # & ‘ ( ) * + , - . / : ; = ? · @ \ “ _ % ˜ ä ß ñ ö ü Æ Å Ø
æ å ø.
Note: Some unique characters can be entered using
one-touch keys.
Enter Plus
Delete
Plus One-Touch key
Delete One-Touch key
Caps One-Touch key
YES and NO keys.
Enter two letters using the
same key.
Press the NO key to move to the next character.
Caps
Move the cursor to make
corrections
YES and NO keys.
Move the cursor to make
corrections
6. Press the Start key. The display shows NO=<OR LOCATION>.
4. Press the Start key.
7. If an alternate fax number is required, refer to the
instructions following Step 3. If no alternate number is
required, continue with the next step.
5. Enter the Location ID. This is a descriptive title up to 15
characters long. Refer to the instructions below.
To do this
Use
8. Press the Start key. The machine displays G3 COMMUN.
Enter Numbers
Enter Spaces
Enter Hyphens
Enter Pause
Enter Plus
Numeric keypad (press once)
Space One-Touch key
Hyphen One-Touch key
Pause One-Touch key
Plus One-Touch key
SPEED.[33.6K] YES (<-) NO (->).
9. Select with the NO key and then press the YES key.
10. G3 ECHO PROTECTION [ON] YES (<-) NO (->) is displayed.
Select and press the YES key.
Delete
Delete One-Touch key
Caps One-Touch key
11. Press the Start key to finish programming the One-Touch
Caps
key. The display shows LOCATION PROGRAMMING.
Enter alphabet characters
Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears. It
is also possible to input characters using One-Touch
keys.
12. To continue programming One-Touch keys, go back to Step
2. If you are finished programming, press the Select
Function key.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Lift off the plastic cover above the One-Touch label. Using a
pencil, write in the name for your newly-programmed One-
Touch key. Replace the cover.
3. Press the Start key to begin sending the fax.
Programming Auto Dial Numbers
Your fax machine has 150 Auto Dial numbers available for
quick, three-digit selection and dialing. For each Auto Dial
number, you can enter a fax number up to 40 digits long and a
Location ID (name) up to 15 characters long.
Note: If you want to delete any programming for a One-Touch
key, follow Steps 1 - 2. At Step 3 press the Space key until
the number is deleted, then continue with Steps 8 - 10.
Chain Dialing
Each fax number that you enter or program into your fax
machine can be up to 40 digits long. In the case that you need to
dial a number that is longer than 40 digits, then you can use the
chain dial feature.
Note: To find Auto Dial numbers which are not yet programmed,
repeatedly press the Search key in Step 2 below. If some
One-Touch keys are not programmed, searching
automatically looks for the first unassigned One-Touch
key.
To create a chain dial number, program the first 39 digits of the
number into a One-Touch key or Auto Dial number. Then press
the Plus One-Touch key to make this a chain dial number. Next,
program the rest of the number into another One-Touch key or
Auto Dial number. You can, if so desired, leave the second part
of the number unprogrammed and enter it manually on the
numeric keypad.
1. Press the Select Function key, then press the 8/Location
Prog. One-Touch key. The display shows LOCATION
PROGRAMMING.
2. Press the Auto Dial key.
3. Using the numeric keypad, enter a 3-digit number for the
Auto Dial number (001 to 150) you want to program.
4. The display will briefly show NO=<FAX NO.>, ID=<LOCATION
1. To use a chain dial number, select the One-Touch key or
Auto Dial number programmed with the first part of the
chain dial number. The display will show PRESS OT/AD/
SRCH KEY.
ID> or a previously-programmed fax number and location.
5. Enter the fax number. Refer to the instructions below.
To do this
Use
2. Then select the One-Touch key or Auto Dial number
programmed with the second part of the chain dial number.
If the second part of the chain dial number was not
programmed, enter it manually on the numeric keypad.
Enter Numbers
Numeric keypad. Press once for each number
required.
Enter Spaces
Space One-Touch key
Hyphen One-Touch key
Enter Hyphens
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To do this
Use
To do this
Use
Enter Pause (i.e., to wait for Pause One-Touch key
long distance or outside
lines)
Enter unique character
Press the 0/Unique key repeatedly until the character
you want appears. The following characters are
available:
Enter Plus
Delete
Plus One-Touch key
Delete One-Touch key
Caps One-Touch key
YES and NO keys.
! # & ‘ ( ) * + , - . / : ; = ? · @ \ “ _ % ˜ ä ß ñ ö ü Æ Å Ø
æ å ø.
Note: Some unique characters can be entered using
one-touch keys.
Caps
Move the cursor to make
corrections
Enter two letters using the
same key.
Press the NO key to move to the next character.
6. Press the Start key.
Move the cursor to make
corrections
YES and NO keys.
7. Enter the Location ID. This is a descriptive title up to 15
characters long. Refer to the instructions below.
8. Press the Start key. The machine displays G3 COMMUN.
SPEED.[33.6K] YES (<-) NO (->).
To do this
Use
9. Select with the NO key and then press the YES key.
Enter Numbers
Enter Spaces
Enter Hyphens
Enter Pause
Enter Plus
Numeric keypad (press once)
Space One-Touch key
Hyphen One-Touch key
Pause One-Touch key
Plus One-Touch key
10. G3 ECHO PROTECTION [ON] YES (<-) NO (->) is displayed.
Select and press the YES key.
11. To continue programming Auto Dial numbers, go back to
Step 3. If you are finished programming, press the Select
Function key.
Delete
Delete One-Touch key
Caps One-Touch key
Caps
Enter alphabet characters
Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears. It
is also possible to input characters using One-Touch
keys.
Programming Groups
Once you have programmed some One-Touch keys or Auto Dial
numbers, you can then program these numbers into groups to
allow you to send the same fax to multiple locations.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press the Select Function key, then press the 8/Location
Prog. One-Touch key. The display shows LOCATION
PROGRAMMING.
6. When you are finished programming your group, press the
NO key. The display shows LOCATION PROGRAMMING.
7. To program another group, go back to Step 2. If you are
2. On the numeric keypad, press the # key. The display shows
finished, press the Select Function key.
GROUP SETTING.
3. Using the numeric keypad, enter the group number (01 - 20)
you want to program.
4. The display shows the number of your current group and
SELECT LOC.(S). You can now add a location to your group
(or delete a location from it). Refer to the instructions below.
To Do This
Use
Add a One-Touch location Press the One-Touch key. Press START to add it to the
group.
Add Auto Dial location
Press Auto Dial. Enter the 3-digit Auto Dial number.
Press START to add it to the group.
Delete One-Touch location Press the One-Touch key. Press START to delete it
from the group.
Delete Auto Dial location
Press the Auto Dial key. Enter the 3-digit Auto Dial
number. Press START to delete it from the group.
Search for a location name Press the Search key continuously until by the location
to add or delete
you want appears. Press START to add it to the group.
Press START to delete it.
5. After you have completed your selection (by pressing YES
or NO), the display again shows SELECT LOC.(S). Continue
to add or delete locations from your group. Each group can
contain up to a maximum of all of the One-Touch and Auto
Dial locations available on your fax machine.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If you often have documents longer than 356 mm, your
dealer may be able to adjust your fax machine to scan and
transmit documents up to 59.06" (1500 mm) in length.
Please be aware that adjusting the length setting to
59.06” (1500 mm) cancels detection of multiple document
misfeeds.
Basic Operation
Preparing Documents
Multiple page documents
Your fax machine can scan paper with a base weight between
– Try to use good quality documents for your transmissions.
Documents that are typed or created in felt-tip black ink on
white (or light) paper work best.
2
2
60 g/m (16 lb.) and 105 g/m (28 lb.). You can load up to 30
2
sheets of standard 75 g/m (20 lb.) paper (e.g. copier or laser
– Do not send documents which are not rectangular.
type paper) at the same time. If you use a heavier paper, you can
load up to 15 sheets. For very heavy paper, load and send pages
sheet-by-sheet. When loading multiple-page documents, do not
load paper which is thinner than 0.08 mm or thicker than 0.13
mm. For documents, do not load paper which is thinner than
0.06 mm or thicker than 0.15 mm.
– Never use documents that have wet or sticky surfaces,
wrinkles, staples or paper clips. However, your fax machine
can transmit documents that have been subject to normal wear,
such as documents with staple holes, letter folds and minor
corner folds.
– If you are not sure how a document will fax, try making a copy
first on your fax machine (load the document face down and
press the Copy key).
Loading Documents
To prevent paper jams and problems during scanning, neatly
stack your documents, aligning their edges, before loading. Do
not load documents of different sizes at the same time.
– If your documents are bent, creased or torn, make a copy on a
photocopier and send the copy instead. You can also use a
photocopier to enlarge or reduce documents before sending.
Note: You can load and prepare to transmit a document while
your fax machine is still sending or receiving another
message (as long as the document feeder is clear). To do
this, load the document, select your location and press the
Start key. Your document will be sent when the current
communication ends.
Document size
All documents must have a minimum width of 5.83" (148 mm)
and a minimum length of 5.04" (128 mm). Documents cannot
be wider than 8.5" (216 mm) or longer than 14.02" (356 mm).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Adjust the document guides to the width of the paper you are
using.
3. Your fax machine will grip the documents, and pull the
bottom page into the machine.
4. If necessary, use the Transmit Resolution/YES key to set
the resolution of your document.
To Do This
Use
Normal office documents
STD (Standard)
Documents with small type FINE or EX. FINE
or other fine details
Documents with photos or PHOTO
many shades of gray
5. If necessary, use the Type of Original/NO key to set the
level of contrast in your document.
2. Neatly stack your documents, and then insert them face
down into the document feeder. If necessary, readjust the
document guides for a snug fit.
To Do This
Use
Documents with normal
contrast
NORMAL
Light documents
Dark documents
LIGHT
DARK
6. Your documents are now ready for faxing or copying.
Sending Faxes To Single Location
1. Load your documents.
2. Select a location. Refer to the instructions below.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Real-Time Dialing
To Do This
Use
Normally, your fax machine dials the entire number of the
location you have selected at one time. Occasionally, it may be
necessary to dial numbers in real time (one digit at a time).
One-Touch key
Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.
Auto Dial number
Numeric keypad
Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.
1. If your fax machine is equipped with a handset, you can dial
in real time by picking up the handset or pressing the Hook/
V. Request key.
Dial as you would on a normal telephone. If you make
a mistake, press the YES key to go back and re-enter
the number.
External telephone
Pick up the handset of your external telephone and
dial the number of the machine you wish to transmit
to. If the receiving fax machine is in automatic
reception mode, you will hear a high pitched tone. If a
person answers the phone, ask them to press the Start
key on their fax machine.
2. Dial the number manually.
Note: Real-time dialing with the use of the Hook/V. Request key
is not available in some countries.
Redialing
If the line is busy or if there is no answer, your fax machine waits
and then automatically redials the number. Also, if your fax
machine is transmitting and a communication error occurs, it will
automatically redial the number and try to send the fax again.
3. If necessary, press the Start key to begin the transmission.
Search Key Dialing
If unsure which One-Touch key or Auto Dial number contains
the location you want to communicate with, use the Search key
to look through an alphabetical list of all of the Location IDs
programmed into your fax machine.
1. You can redial a number manually at any time by pressing
the Redial key.
Confirming Results
1. When selecting locations, press the Search key. The display
After transmission, press the Copy key once (with no documents
loaded) to see a report confirming your transmission on your fax
machine’s display. To print the report, press the Copy key a
second time. See “Reports” on page 60 for more information.
will show ENTER 1-ST CHAR.
2. Repeatedly press the Search key to look through the entire
list of locations in alphabetical order, or locate the letter you
want on the numeric keypad, and press that key repeatedly to
look through Location IDs beginning with that letter.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
your telephone keypad. Refer to Remote Receive on
page 55 in Programming.
Stopping Transmissions
To stop a transmission while it is in progress, follow the
instructions below.
3. After you receive the fax, a long beep will tell you that the
transmission was successful.
1. Press the Stop key twice. The display will show STOPPED.
2. If documents are stuck part way through the document
feeder, you may see the following message on the display
RELOAD DOCUMENT. Press the STOP key again and your
fax machine will feed the document the rest of the way
through the document feeder.
Receiving Faxes Into Memory
Your fax machine automatically receives messages into memory
and does not immediately print them in the following situations.
Memory Reception
Note: If your fax machine cannot feed your document through
the document feeder, refer to “Problem Solving” on
page 65.
• When your fax machine has been set to Memory Reception
mode [MEM], any received faxes are stored in the memory
of your fax machine and are not automatically printed. The
display shows MSG. IN MEMORY if any faxes have been
received during memory reception mode.
Receiving Faxes Manually
Your fax machine receives faxes automatically unless the fax
machine has been set to the manual receive [TEL] mode. If your
fax machine is set to the manual receive [TEL] mode, follow the
instructions below.
• When you change the reception mode of your fax machine,
any nonconfidential fax messages stored in memory are
automatically printed.
Note: If you want to print any fax messages stored in memory
without changing reception mode, use the procedure
described below in “No Toner Reception” on page 38.
1. When your telephone or fax machine rings, pick up the
telephone handset. If the call is a voice call, start speaking to
the caller.
• If you want to protect any messages received into memory
with a password, then mailbox 16 has to be set to
2. If the call is a fax call, or if a person wishes to fax you a
document after having a conversation, press the Start key
and hang up the handset.
confidential and a password created. When password
protection has been set for memory reception, then printing
Note: You can also tell your fax machine to start fax reception
by entering your 2-digit code for remote receive using
37
Download from Www.Somanuals.com. All Manuals Search And Download.
of any messages can only be done after entering a four-digit
password. Refer to “Confidential Faxes” on page 45 in
Advanced Operations for the procedures on how to create a
mailbox and password.
Print Memory Reception
• To print out a message stored in memory when toner is
running low, replace the toner cartridge or follow the
instructions below.
SELECT
2/AB
FUNCTION
No Paper Reception
1: PRINT MEMORY MSG?
• When your fax machine has run out of paper, a MSG. IN
MEMORY, REPLACE PAPER message appears on the display.
Your fax machine continues to receive faxes into memory
when it has run out of paper. Your fax machine automatically
prints out any messages received in memory when the paper
is replaced.
YES
PRINT
OPERATION.
1. Press the Select Function key.
2. Press the 2/Print Operation One-Touch key. The display
shows 1:PRINT MEMORY MSG.?
No Toner Reception
3. Press the YES key.
When your fax machine is running low on toner, it displays a
TONER LOW, REPLACE TONER CART. message. Rather than risk
printing an unreadable message, your fax machine can be set by
the dealer to automatically receive faxes into memory. The
default setting not to receive faxes into memory when toner is
running low allows time for you to change the toner cartridge.
Note: Even if you see a TONER LOW message on your fax
machine, you may be able to use the 2/Print Operation
One-Touch key to continue printing faxes, but the print
quality cannot be guaranteed. Replace your toner
cartridge as soon as possible.
Canceling Messages Stored In Memory
It is also possible to erase messages received in memory without
printing them.
• If your fax machine has received a message in memory
because toner is low, MSG. IN MEMORY appears on the
display.
1. After you have followed the instructions to print out
messages stored in memory, the display shows MESSAGE IN
MEMORY, PRINTING.
2. To erase the message instead of printing it, press the Stop
key. The display shows CANCEL?
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the YES key to erase the message from the memory of
2. Press the 9/User Prog. One-Touch key. The display shows
your fax machine.
1:FUNC. PROGRAMMING.
3. Press the YES key. The display shows FUNCTION NO. [ ].
Rejecting Unsolicited Fax Messages
4. Using the numeric keypad, enter 08. The display shows
08:CLOSED NETWORK, and the current setting of this
function.
SELECT
9/OP
FUNCTION
TUV
08: CLOSED NETWORK
0
YES
8
USER
PROG.
5. Press the NO key until the setting you want appears in the
display.
The closed network option allows you to limit the locations with
which your fax machine can communicate. Using this function,
you can set your fax machine to refuse to receive any faxes from
locations whose telephone numbers are not programmed into
your One-Touch keys or Auto Dial numbers. This function
allows you to reject any unsolicited faxes such as advertising.
6. Press the YES key to confirm the new setting then press the
Select Function key to finish.
Power Failures & Memory
Although the memory is backed up by battery (about 20 hours
when the battery has been fully charged and the temperatures are
normal), the following problems occur when power is cut off for
lengthy periods of time.
Note: In some countries, this function cannot be set by the user.
Please contact your dealer for assistance.
You can also set your fax machine not to send faxes to locations
whose telephone numbers are not programmed into your One-
Touch keys or Auto Dial numbers.
• Any messages your fax machine has scanned into memory,
but not yet transmitted, are lost.
• Any messages your fax machine has received into memory,
but not yet printed, are lost.
• If you have loaded documents onto the document feeder of
your fax machine, any dialing or transmission settings are
lost.
The available settings are:
• Limit Reception Only (RX)
• Limit both Transmission and Reception (T/R)
• No Limitation on Transmission or Reception (OFF).
Follow the instructions below to set the parameters desired.
Your fax machine prints a power outage report to inform you of a
power failure. Use this report to determine which received
messages you may have lost and which transmissions you may
1. Press the Select Function key.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
have to resend. Refer to “Reports” on page 60 for more
information.
2. Press in on the lower half of the front panel indents, just
above the paper cassette.
Making Copies
Your fax machine can also be used to make copies. You can make
up to 99 copies at one time. Your fax machine automatically
makes all copies in FINE mode. STD, EX.FINE and PHOTO
mode can be selected manually by pressing the YES key.
1. Load your documents.
2. Press the Copy key. The display shows PRG. NO. OF COPIES,
[1SETS]. If you want to make just one copy, you are finished.
Your fax machine waits a moment, then begins copying.
3. Pull the manual paper feeder down until it is horizontal.
3. To make multiple copies, enter the number of copies you
desire on the numeric keypad. Then press the Copy key
again. Your fax machine begins making the required number
of copies.
Making Copies Using Manual Paper Feeder
The manual paper feeder of your fax machine allows you to
make copies on a different type of paper than what is normally
kept in the paper tray of your fax machine. To make copies using
the manual paper feeder, follow the instructions below.
1. Load your documents.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Adjust the paper guides on the manual paper feeder.
Using Voice Request
The voice request feature allows you to have a conversation with
a person at a remote fax machine during a fax communication.
Either the sender or receiver can initiate a voice request.
If you are sending a fax, you can answer a voice request only
after all pages have been transmitted. If you are receiving a fax,
you can answer a voice request after reception of each page. You
will know if the person on the other fax machine has issued a
voice request when you hear a warbling tone. If you do not
respond in approximately six seconds, the voice request is
automatically cancelled.
5. Insert a sheet of paper face up, adjusting the guides again to
ensure the paper is straight.
Note: You need to have either an attached handset or an
external telephone to use the voice request function.
With the ITU-T V.34 modem, this feature can’t be used.
This function can only be used during Feeder-TX.
Initiating Voice Request
1. During a fax communication, press the Hook/V. Request
key.
2. When the other party answers your request, your fax
machine will emit a repetitive warbling sound. The display
shows LIFT HANDSET AND PRESS VOICE REQUEST.
6. Press the COPY key.
Note: It is recommended to make single copies only when using
the manual paper feed slot. This will prevent any possible
paper feed jams from occurring.
3. Lift your handset and press the Hook/V. Request key.
Note : If you press your Hook/V. Request key to initiate a voice
request during transmission, but no one is there to answer,
41
Download from Www.Somanuals.com. All Manuals Search And Download.
your fax machine automatically sends a call back
message to the remote site giving a telephone number
where you can be reached.
Advanced Operations
Broadcast
A broadcast fax is a fax sent to several locations and is a one-
time event. It consists of a collection of destinations (fax and/or
email addresses) and is NOT saved (programmed) into the
machine.
A call back message is only sent if you have programmed
a call back number into your fax machine. Refer to
“Setting Fax Machine Identification” on page 25.
Answering Voice Request
1. Lift the handset and press the Hook/V. Request key.
A broadcast can be any combination of One-Touch or Auto-Dial
keys or manually entered number(s) from the numeric keypad. If
an email address is required, only those pre-programmed can be
used. The manually entered numbers must be entered last.
Refer to “Programming Auto Dial Numbers” on page 31 for
further reference.
Perform a Broadcast Operation
1. Load your documents.
2. Enter locations by pressing One-Touch keys or Auto Dials.
3. After pressing the first entry, you have three seconds to enter
the next location in your broadcast list. The machine groups
the list of numbers for the broadcast. You must enter the
One-Touch and Auto Dial numbers before entering manual
42
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press the YES key to print the Entry Report or press NO to
check the entries via the LCD. If checking via LCD the
following appears:
numbers from the numeric keypad. Refer to the instructions
below.
To Do This
Do This
CHECK LOCATIONS(S)
YES(STR/LOC.) EXIT( )
One-Touch key
Auto Dial number
A group
Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.
Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.
8. Press the Start key repeatedly to cycle through the entries.
Using the numeric keypad, press the # key after press
Auto Dial key, then enter the number of the group you
want to use.
Press Start to accept the entry or NO to clear the entry.
9. Once finished, press No to exit the verification menu and the
display will read:
A number dialed on the
numeric keypad
Dial as you would on a normal telephone.
ENTRY IS OK?
DIAL(START)CHECK( )
4. When finished selecting locations, press Start. The display
shows:
10. Press Start to begin transmission or to load the documents
ENTRY IS OK?
DIAL(START)CHECK( )
and then send.
Delayed Sending of Faxes
The delayed transmission feature allows you to send documents
at a specified date and time, and frees you from the need to
manually start the transmission. You can program a delayed
transmission to occur at any time on the day of your
5. If satisfied with the entries submitted, press Start to begin
transmission or to load the documents. If you wish to
CHECK what entries have been submitted, press the NO key
to access an Entry Report or to check the entries via the LCD
screen.
transmission, or at any time over the next three days.
6. If checking the entries, the display will read:
PRINT ENTRY REPORT?
YES( )
NO( )
43
Download from Www.Somanuals.com. All Manuals Search And Download.
You can send a delayed fax either from the document feeder or
from memory. Refer to the table below to decide which method
you want to use.
Note: Enter the time using a 24-hour clock, i.e., 8:00 a.m. would
be entered as 08:00 and 8:00 p.m. would be entered as
20:00.
8. Press the YES key and the display shows SELECT
Delayed TX Features &
Limitations
From Feeder From Memory
LOCATION(S).
9. Select a location. Refer to the instructions below.
Number of locations
One
One
Multiple
Number of delayed faxes in your fax
machine at any one time
Up to twenty
To Do This
Do This
One-Touch key
Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.
Fax machine can be used for other
transmissions while a delayed fax is
waiting to be sent?
No
Yes
Auto Dial number
Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.
A number dialed on the
numeric keypad
Dial as you would on a normal telephone.
Sending Delayed Faxes
1. Load your documents.
10. Press Start.
2. Press the Select Function key.
• If the MEM/FEEDER SW is on MEM, the machine will begin
scanning. After scanning, the machine will stand by for the
delayed TX.
• If the MEM/FEEDER SW is on FEED, the machine will stand by
for the delayed TX.
3. Press the 1/Delayed TX One-Touch key. The display shows
DELAYED TX and today’s date.
4. If transmission is to occur today press YES key and go to
step 7. If transmission is to occur at a later date press the NO
key.
Canceling Delayed Transmissions
To cancel a delayed transmission from the document feeder or
from memory before it has been sent, follow the instructions
below.
5. Using the numeric keypad, enter the date on which you wish
the transmission to begin.
6. Press the YES key. The display shows DELAYED TX TIME.
7. Using the numeric keypad, enter the time on which you wish
the transmission to begin.
1. Press the Stop key. The display shows COMMUNICATION
CANCEL.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the YES key. The display shows the Location ID or
telephone number of the first delayed transmission currently
loaded in your fax machine.
A receiving fax machine stores the message in a confidential
mailbox or ITU sub-address protected by a password and will not
print any confidential faxes until the correct password is entered.
3. Press the YES key to cancel the delayed transmission that is
displayed. If more than one delayed transmission has been
programmed into your fax machine, press the NO key until
the location of the delayed transmission you want to cancel
appears, then press the YES key to cancel.
Sending Confidential Faxes
1. Load your documents.
2. Press the Select Function key.
3. Press the 3/Confidential TX One-Touch key. The display
will ask you to enter the number of a confidential mailbox,
or ITU sub-address, on the receiving fax machine.
4. If the delayed transmission was a feeder transmission, press
the Stop key again to remove the document from the
document feeder.
4. Using the numeric keypad, enter the number of the
confidential mailbox or ITU sub-address you are
transmitting to.
Confidential Faxes
Fax machines are often placed in public places where anyone can
look through received faxes. To overcome this, use the
confidential fax feature when sending and/or receiving
confidential faxes.
5. Press the Start key to confirm your entry. The display shows
SELECT LOCATION.
6. Select your location as follows.
To Do This
Do This
You can send and receive confidential faxes to/from other fax
machines with personal mailboxes. The International
Telecommunications Union (ITU) has now created a worldwide
standard that uses ITU sub-addressing to allow fax machines or
PC fax software from different manufacturers to send and receive
confidential faxes.
One-Touch key
Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.
Auto Dial number
Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.
A number dialed on the
numeric keypad
Dial as you would on a normal telephone.
When sending confidential faxes, you must know in advance the
mailbox number, or ITU sub-address, of the recipient you are
sending the message to. Ask the person who is receiving the fax
to tell you their mailbox number, or ITU sub-address.
Note: You cannot send a confidential fax to a group or multiple
individual locations.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press the Start key and your fax machine will begin sending
3. Using the numeric keypad, press 5. The display shows
the fax.
5:PERSONAL BOX PRG.
4. Press the YES key. The display shows PERSONAL BOX
Receiving Confidential Faxes
NO. [ ].
Before you can receive confidential faxes, you have to create a
confidential or personal mailbox on your fax machine that is
password protected (see below). You then have to tell the person
sending the confidential fax your mailbox number.
5. Using the numeric keypad, enter the 2-digit number of the
personal box you want to use and press the YES key. The
display normally shows PERSONAL BOX [CLOSE].
6. Press the NO key until the display shows PERSONAL BOX
When your fax machine receives a confidential message, it will
store the message unprinted in the mailbox (in memory) until
you enter a password. Your fax machine can have a maximum of
16 mailboxes.
[CONF].
Note: If you cannot select [CONF], then the mailbox number
you have selected already contains a bulletin polling
message. If you get the message ILLEGAL OPERATION,
then the mailbox number you have selected already
contains a confidential message in memory. Please select
another personal box number to use.
Your fax machine automatically prints a confidential RX report
to indicate that a confidential fax has been received and is
waiting to be printed. Also, MSG. IN MEMORY appears on the
display after receipt of a confidential fax.
7. Press the YES key and using the numeric keypad, enter the
4-digit password you want to use with your mailbox.
Creating Confidential Mailbox
SELECT
8. Press the YES key to confirm your entry.
9/OP
FUNCTION
JKL
1: FUNC.PROGRAMMING
YES
9. Your fax machine will ask you to enter another mailbox
number. To continue programming mailboxes, go back to
Step 5. If you are finished programming, press the Select
Function key.
5
USER
PROG.
Create a confidential or personal mailbox on your fax machine
as follows:
1. Press the Select Function key.
2. Press the 9/User Prog. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Password or Closing Mailbox
SELECT
11. The fax machine shows DELETE PERSONAL BOX. Press Yes.
To continue programming mailboxes, go back to Step 5. If
you have finished programming, press the Select Function
key.
9/OP
FUNCTION
JKL
1: FUNC.PROGRAMMING
YES
5
USER
PROG.
Printing Confidential Faxes
SELECT
If you want to change the password of an existing mailbox, or if
you want to close an existing mailbox, follow the instructions
below.
2/AB
FUNCTION
1: PRINT MEMORY MSG?
NO
YES
PRINT
OPERATION.
1. Press the Select Function key.
Each time your fax machine receives a confidential fax, it auto-
matically prints a confidential reception report telling you
which mailbox number received the message. To print a confi-
dential fax after your fax machine has received it, follow the
instructions below.
2. Press the 9/User Prog. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
3. Using the numeric keypad, press 5. The display shows
5:PERSONAL BOX PRG.
4. Press the YES key. The display shows PERSONAL BOX
1. Press the Select Function key.
NO. [ ].
2. Press the 2/Print Operation One-Touch key. The display
5. Using the numeric keypad, enter the 2-digit number of the
mailbox whose password you want to change, or which you
want to close.
shows PRINT MEMORY MSG.? Press No.
3. The display shows PRINT PERSONAL BOX?
4. Press the YES key. The display shows PERSONAL BOX
6. Press the YES key. The display shows PERSONAL BOX
NO. [ ].
[CONF].
5. Using the numeric keypad, enter the two-digit number of the
mailbox you want to print from. The display shows
PERSONAL BOX NO. [ ] YES OR NO. Press the YES key.
7. To close a mailbox, press the NO key until [CLOSE] is
displayed and press YES. Go to Step 11.
8. To change the password, press the YES key. The display
shows PRG. PASSWORD [XXXX].
Note: If no message is stored in that mailbox, the display shows
NO DATA IN MEMORY.
9. Enter a new 4-digit number on the numeric keypad.
10. Press the YES key to accept the new password.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using the numeric keypad, enter the 4-digit password for the
mailbox you want to print from.
Remote List Number: These numbers (up to 20 digits) are
the code numbers of locations or groups of locations
programmed into the relay key station.
7. Press the YES key. The message begins printing.
Relay Key Station
Note: If you want to clear the mailbox without waiting for
printing, press the Stop key at this point. The display
changes to CANCEL? Press the YES key to clear the
mailbox.
The relay key station is the fax machine that receives the origi-
nal fax message, and then automatically relay broadcasts the
message to other remote fax machines. For this feature to be
available, the fax machine operating as a relay key station must
be able to receive and relay broadcast the message to other fax
machines (OKIFAX 2600, 5750, 5950, 5980, or fax of another
maker with a SUB PWD relay function).
Relay Broadcasting
Relay broadcasting is where one fax machine, which is the relay
initiating station, sends a document to another fax machine. The
receiving fax machine, which is the relay key station, then re-
sends (broadcasts) the document to a number of other locations.
Initiating Relay Broadcasts
SELECT
Relay Initiating Station
4/EF
FUNCTION
4: RELAY PASSWORD
Your fax machine can act as the relay initiating station, which
starts the relay broadcast by sending the original documents.
Before programming your fax machine to initiate a relay broad-
cast, you will need to obtain the following information from the
operator of the fax machine you intend to use as a relay key sta-
tion:
RELAY
INIT. TX
1. Load your document.
2. Press the Select Function key.
3. Press the 4/Relay Initiate TX One-Touch key. The display
Note: The designated recipient of the receipt report sent by the
relay station (function in which the relay station sends a
report on transmission results to the destination specified
by the relay initiating station) shall be the destination
programmed into Auto-Dial number 150.
shows RELAY PASSWORD.
4. Using the numeric keypad, enter the password from the hub
relay station (up to 20 digits).
5. Press the Start key. The display shows REMOTE LIST NO.
6. Using the numeric keypad, enter the remote list number.
Relay Password: This is the relay password (up to 20
digits) which is programmed into the relay key station.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press the YES key and the display changes to SELECT
selective polling, which is the latest standard. Your fax machine
supports both standards.
LOCATION.
8. Select the location of the relay key station as follows:
ITU selective polling allows you to retrieve documents from
individual mailboxes or ITU sub-addresses from a fax machine
that meets the standard for ITU selective polling.
To Do This
Do This
One-Touch key
Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.
Polling Transmission
SELECT
Auto Dial number
Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.
NO
5/GH
FUNCTION
BULLETIN POLL.
OR
A number dialed on the
numeric keypad
Dial as you would on a normal telephone.
POLLING
YES
9. Press the Start key. Your fax machine will begin sending the
1. Load your documents.
2. Press the Select Function key.
fax.
3. Press the 5/Polling One-Touch Key. The display shows
Polling (Sending Documents
Requested by Another Fax)
BULLETIN POLL.
4. For standard one-time polling, press the NO key. The display
shows WAITING TO BE POLLED and your document remains
in the document feeder until your fax machine has been
polled. To cancel standard polling, simply remove your
document.
When you normally send faxes, you load your document into
your fax machine, select a location and, if required, press the
Start key to begin sending the document. However, sometimes it
is more useful to be able to simply load your document into your
fax machine and set it to wait for the another fax machine to call
and collect the document. This is called setting your fax machine
to be polled, or polling transmission. Calling another fax
machine to receive documents someone else has loaded into their
fax machine is called polling reception.
Note: Depending on the MEM/FEEDER SW setting, the unit
can switch to polling stand-by after reading the memory.
5. For ITU bulletin polling, press the YES key and the display
changes to PERSONAL BOX NO. [ ].
6. Using the numeric keypad, enter the 2-digit number of the
There are two standards for polling. Standard polling is to an old
standard that is used by many, but not all manufacturers and ITU
personal mailbox you want to use and press the YES key.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Your document is then scanned into the memory of your fax
machine and the message BULLETIN MSG. IN MEM appears on
the display.
4. Press the YES key. The display shows PERSONAL BOX
NO. [ ].
5. Using the numeric keypad, enter the two-digit number of the
mailbox you want to close and press the YES key. The
display shows PERSONAL BOX [POLL].
Note: If you get the message ILLEGAL OPERATION appearing
on the display, then the personal mailbox you have
selected is already in use as a confidential mailbox.
Please select another personal mailbox to use.
6. Press the NO key first and then press the YES key twice to
close the mailbox.
If you get message OVER WRITE appearing on the
display, then the personal mailbox you have selected is
already in use for ITU bulletin polling. You can select
another personal mailbox to use or over write the bulletin
message already in the personal mailbox.
Printing Bulletin Messages
2/AB
SELECT
FUNCTION
1: PRINT MEMORY MSG?
NO
YES
PRINT
OPERATION.
After your fax machine has been polled and the document
has been sent, your document remains in mailbox
allowing the document to retrieved more than once.
1. Press the Select Function key.
2. Press the 2/Print Operation One-Touch Key. The display
shows PRINT MEMORY MSG?.
To cancel ITU bulletin polling transmission, close the
mailbox using the following instructions.
3. Press the NO key. The display shows PRINT PERSONAL
BOX?.
Canceling ITU Bulletin Polling Transmission
SELECT
4. Press the YES key. The display shows PERSONAL BOX
9/OP
NO. [ ].
FUNCTION
JKL
1: FUNC.PROGRAMMING
YES
5
5. Using the numeric keypad, enter the 2-digit number of the
mailbox you want to print from and press the YES key. The
message begins printing.
USER
PROG.
1. Press the Select Function key.
Note: If no message is stored in that mailbox, the display shows
2. Press the 9/User Prog. One-Touch key. The display shows
NO DATA IN MEMORY.
1:FUNC. PROGRAMMING.
3. Using the numeric keypad, press 5. The display shows
5:PERSONAL BOX PRG.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to clear the mailbox without printing, press
the Stop key. The display changes to CANCEL?. Press the
YES key to clear the mailbox.
5. Select the location of the fax machine you are polling as
follows:
To Do This
Do This
Polling Reception (Dialing Another Fax Machine
One-Touch key
Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.
to Request Documents)
SELECT
FUNCTION
Auto Dial number
Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.
5/GH
START
NO.=MAIL BOX NO.
POLLING
A number dialed on the
numeric keypad
Dial as you would on a normal telephone.
When carrying out polling reception, the fax machine you are
polling should be able to carry out standard polling transmission
or ITU polling transmission.
6. Press the Start key. Your fax machine will begin polling the
remote fax machine.
Dual Access
1. With no documents loaded, press the Select Function key.
2. Press the 5/Polling One-Touch key. The display shows
The advanced dual access feature of your fax machine allows
you to load and prepare documents for transmission while your
fax machine is sending or receiving another message, or
automatically printing reports. This feature increases your
productivity and reduces the time you must spend waiting for
other operations to finish.
NO.=MAIL BOX NO.
3. Press the Start key when the fax machine you are contacting
supports standard polling and go to Step 5.
4. If the fax machine you are contacting supports ITU polling,
using the numeric keypad enter the number of the mailbox or
ITU subaddress on the fax machine you are polling and press
the Start key. The display changes to POLLING RX, SELECT
LOCATION.
If you load a document on the document table and the display
shows SELECT LOCATION, then your fax machine is ready to
allow you to prepare for the next transmission.
While Sending Faxes
After your fax machine has finished scanning a document into
memory (and while it is transmitting from memory), you can do
the following:
51
Download from Www.Somanuals.com. All Manuals Search And Download.
• Load another document and prepare it for transmission.
memory available. When the report has finished printing,
your received fax message is then printed.
• Continue to load documents as long as there is memory
available on your fax machine. After the report is printed,
your fax is automatically sent.
• Continue to load documents as long as there is memory
available on your fax machine. When the first transmission is
complete, the next fax is automatically sent.
• Make copies.
While Receiving Faxes
While your fax machine is receiving a fax, you can:
• Load another document and prepare it for transmission.
• Continue to load documents as long as there is memory
available on your fax machine. When the first transmission is
complete, the next fax is automatically sent.
• Continue to receive faxes while earlier messages are being
printed if your fax machine has been set to memory reception
mode.
While Making Copies
While your fax machine is making local copies, you can:
• Continue to receive faxes while copies are being printed if
your fax machine has been set to memory reception mode.
While Printing Reports
While your fax machine is automatically printing reports, you
can:
• Continue to receive faxes while reports are being
automatically printed if your fax machine has enough
52
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the Select Function key to finish.
Customizing Features &
Operations
User Function Settings
User function settings allow you to customize the general
operation of your fax machine. Refer to the list below to
determine which settings you may need to change, then refer to
“Changing User Function Settings” on page 57 to make the
change.
Many features and functions of your fax machine have settings,
which can be changed to customize the operations of your fax
machine. Because each country has different regulations, you
may not be able to access all of the settings listed below. If you
have trouble changing a setting, contact your dealer for
assistance.
Note: Depending on local telephone regulations, some of the
following user function settings may not be available.
User Function Settings List
01: MCF. (SINGLE-LOC.): This function automatically prints a
Message Confirmation Report after each single location
transmission or polling transmission. Available settings are On
and Off.
Viewing Your Current Settings
SELECT
6/IJ
FUNCTION
JKL
5:CONFIGURATION
YES ( ) NO( /1-6)
5
REPORT
PRINT
02: MCF. (MULTI-LOC.): This function automatically prints a
Message Confirmation Report after each multiple location
transmission. Available settings are On and Off.
Follow these instructions to obtain a configuration report
showing your fax machine’s current settings.
03: ERR. REPORT (MCF): This function automatically prints a
Message Confirmation Report each time an error occurs during a
transmission or polling transmission operation. Available settings
are On and Off.
1. Press the Select Function key.
2. Press the 6/Report Print One-Touch key. The display shows
1:ACTIVITY REPORT.
04: IMAGE IN MCF: When a message confirmation is printed,
this function adds the first page your fax machine transmitted.
This is printed at the bottom of the message confirmation report.
Available settings are Part., Whole and Off.
3. Using the numeric keypad, press 5. The display shows
5:CONFIGURATION.
4. Press the YES key and the report will begin printing.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
• When Part. is selected, the common header of the first page is
added in original size.
• When Whole is selected, the first page is added at a reduced
size.
09: TX MODE DEFAULT: This function allows you to change
default type of original, transmit and copy resolution settings of
your fax machine. Unless you select otherwise using the
Transmit Resolution/YES or Type of Original/NO keys, your fax
machine is set to use the STD and NORMAL settings. If you are
constantly sending faxes, which require some other combination
of transmission modes, use this function setting to change the
default transmission modes to any other combination of settings.
While you are programming, the new default combinations will
appear on the LEDs above the Transmit Resolution/YES or Type
of Original/NO keys.
05: SENDER ID: This function controls the printing of the
Sender ID of your fax machine on the faxes you send. When
turned on, your Sender ID, date and time will be printed on each
page slightly outside the image area of your document. When
turned off, your Sender ID, date and time will not be printed.
However, some fax machines will print your TSI/CSI.
06: MONITOR VOLUME: This function sets the volume your
fax machine uses for telephone line monitoring sounds during
dialing. Available settings are Off, Low, Middle, High Middle
and High.
10: T/F TIMER PRG.: When set to the telephone/ fax answering
mode, your fax machine automatically distinguishes between
incoming voice and fax calls. If the incoming call is a voice call,
your fax machine will ring to tell you to pick up the handset. If
you do not answer, your fax machine automatically switches
back to facsimile mode to allow the calling party to send a fax.
The T/F TIMER function controls how long your fax machine
waits before switching back to fax mode. Available settings are
20 seconds or 35 seconds.
07: BUZZER VOLUME: This function sets the volume of the
various beep and alarm tones your fax machine emits during
operations. Available settings are Low, Middle and High.
08: CLOSED NETWORK: This function allows you to program
your fax machine to refuse to receive faxes from or transmit
faxes to locations whose telephone numbers have not been
programmed into the One-Touch keys or Auto Dial numbers of
your fax machine. Using this function, you can set up a closed
network of fax machines. If you do not want your fax machine to
transmit faxes to or receive faxes from locations outside your
network, select T/R. If you only want your fax machine to refuse
to receive faxes from outside your network, select RX. Available
settings are OFF, T/R and RX.
11: RING RESPONSE: This function controls how long your
fax machine waits before answering an incoming telephone call
when your fax machine is set to auto receive or telephone/fax
auto switch answering modes. The available settings are 1 ring, 5
seconds, 10 seconds, 15 seconds or 20 seconds.
Note: If your fax machine is set to telephone/fax auto switch
answering mode, it is recommended that you set ring
response to one ring.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
12: DISTINCTIVE RING: Distinctive ringing is a service offered
by some telephone services that allow you to have different
numbers on one line, each with its own distinctive ring. In this
way, when you get an incoming call, you can identify what
number is being called by the ring pattern. Your local telephone
service can provide you with more information about this service
and if it is available. If available, this service is usually offered as
a monthly charge to your normal telephone bill. Available
settings are Off, Set and On. To use this function, refer to
“Setting Distinctive Ring” on page 57.
OFF, there is no effect on the ringer in telephone/fax auto
switch answering mode.
16: REMOTE RECEIVE: When you receive an incoming call,
this function allows you to remotely tell your fax machine to
switch from telephone to fax mode to receive an incoming fax.
To use this function, use the keypad of a handset or an external
telephone to enter the remote receive number you have
programmed into your fax machine. Available settings are Off,
00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** and ##. This function
only works if your telephone system is a touch-tone dialing
system.
13: PAPER SIZE: This function allows you to tell your fax
machine what size of paper you are using in the paper cassette
and manual paper feed of your fax machine. Available settings
are A4, letter, legal 13 and legal 14.
17: MEM./FEEDER SW.: This function selects the transmission
mode of MEM. TX (scan before sending) or FEED. TX (send
each page directly from document feeder). This becomes
available when 25: INSTANT DIAL is off.
14: USER LANGUAGE: This function allows you to select
among the languages programmed into your fax machine.
19: ECM FUNCTION: The error correction mode function helps
your fax machine to improve communication in areas where
telephone line conditions are poor. Available settings are On and
Off.
15: INCOMING RING: This function controls the telephone
ringing sound your fax machine makes when a call comes in.
When this function is set to off, your fax machine will not ring
during incoming calls. When set to on, your fax machine only
rings when set to manual receive mode or 11:RING RESPONSE
is set to 5 to 20 seconds (except 1 ring). When set to DRC, your
fax machine rings for each incoming call with the same tone,
even if you have function 12:DISTINCTIVE RING set to on.
Available settings are On, Off and DRC.
Note: When using ECM, the transmitting fax machine
automatically checks the data as it is sent. If the receiving
fax machine cannot verify the transmission, the
transmitting fax machine will retransmit as necessary.
Using ECM also increases transmission time because the
data is checked as it is transmitted.
Note: DRC is only available if the setting of user function
12:DISTINCTIVE RING is available. Also, when set to
Not all fax machines have ECM. If you have activated
ECM and then transmit to a fax machine not using ECM,
55
Download from Www.Somanuals.com. All Manuals Search And Download.
there will be no change in fax transmission time because
ECM will not be used.
Broadcast Mode
• Memory available: all the documents are read into the mem-
20: REMOTE DIAGNOSIS: The remote diagnostics feature
allows a service person to remotely dial and service your fax
machine. Available settings are On and Off.
ory before call origination.
• Memory full: reading is impossible.
22: NO TONER MEM RX: With this function turned on, your
fax machine will automatically receive and store messages in its
memory when it is low on toner. When turned off, messages will
print even if toner is low or empty. Available settings are On and
Off.
25 Instant Dial = ON:
• Memory available: document reading starts upon call origi-
nation.
• Memory full—Feeder transmission: starts reading document
when receiving the CFR signal of the remote machines after
call origination.
23: MEM FULL SAVE: With Broadcast Transmission and other
functions, call origination starts after an entire document is read
into memory. If during this process, memory becomes full and an
“operator time out” seems likely, a message to that effect is
shown in the Display Panel if this MEM full save function is on.
If it is off, data that could not be read into memory is
25 Instant Dial = OFF, 17 Mem./Feeder SW = MEMORY:
• Memory Available: call origination after all documents are
read into memory.
automatically deleted. Available settings are On and Off.
• Memory Full—Feeder transmission: starts reading document
when receiving the CFR signal of the remote machines after
call origination.
24: CONTINUOUS TONE: With this function on, you can
choose whether to have a warning tone sound when receiving a
transmission. Pressing the STOP key turns off the tone. Set this
function to off for no warning sound. Available settings are On
and Off.
25 Instant Dial = OFF, 17 Mem./Feeder SW = FEEDER:
• Memory Available—Feeder transmission: starts reading doc-
ument when receiving the CFR signal of the remote
machines after call origination.
25: INSTANT DIAL: Set this function to start reading documents
upon call origination when transmitting. Available settings are
On and Off.
• Memory Full—Feeder transmission: starts reading document
when receiving the CFR signal of the remote machines after
call origination.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
26: RESTRICT ACCESS: Select whether or not you want
restricted access. Turning on this function renders your restricted
ID registration active. Available settings are On and Off.
4. Using the numeric keypad, enter the 2-digit number of the
function you want to change. This display then shows the
name of the selected function.
5. Press the NO key to cycle through the settings for the user
function, then press the YES key to confirm your selection.
The name of the next user function appears in the display.
27: WIDTH REDUCTION: Turning this function on enables you
to print received data at a slightly reduced width.
28: TONER SAVE: This function allows you to select whether
to use toner saving during facsimile printing. The settings are On
and Off.
6. Press the Select Function key to finish or the Stop key to
back out.
Note: As an example for changing the settings, see Setting
Distinctive Ring.
29: CNG COUNT: This function allows you to switch to a
facsimile reception mode at a certain CNG signal quantity (1-5)
when the unit is operating in T/F.
Setting Distinctive Ring
SELECT
30: 600DPI FAX TX: This function sets whether to enable 600-
DPI read when Ex. FINE is selected for TX RESOLUTION. The
settings are On and Off.
9/OP
FUNCTION
1: FUNC.PROGRAMMING
YES
USER
PROG.
Changing User Function Settings
SELECT
Note: In some countries, distinctive ring service is not available
from the local telephone company.
9/OP
FUNCTION
1: FUNC.PROGRAMMING
YES
USER
PROG.
1. Press the Select Function key.
2. Press the 9/User Prog. One-Touch key. The display shows
1. Press the Select Function key.
1:FUNC. PROGRAMMING.
2. Press the 9/User Prog. One-Touch key. The display shows
3. Press the YES key. The display shows FUNCTION NO.[ ].
1:FUNC. PROGRAMMING.
4. Using the numeric keypad, enter 12. The display shows
3. Press the YES key. The display shows FUNCTION NO. [ ].
12:DISTINCTIVE RING and its current setting OFF.
5. Press the NO key to change the setting to SET.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press the YES key. The display changes to SETUP FAX RING,
Note: Some settings are not available in some countries. If you
have trouble accessing a dial parameter setting listed
here, contact your dealer for assistance.
CALL FAX NUMBER NOW.
7. Using a separate telephone line, immediately dial the
number assigned to the fax machine (you must do this within
90 seconds). When your fax machine begins to ring, the
display changes to AUTO DETECTING, RING PATTERN.
Dial Parameter Settings List
REDIAL TRIES: This function controls how many times your
fax machine automatically redials a number which is busy or
which does not answer. Available settings are from 0 to 10 tries.
(In FRE, the available settings are 1-5 tries.)
8. Your fax machine then automatically detects and remembers
its assigned ring pattern. When your fax machine has
finished programming its ring pattern, the display shows
DISTINCTIVE RING SET, RESULT=OK. After detecting and
remembering the ring pattern, the display changes to
DISTINCTIVE RING, [ON].
REDIAL INTERVAL: The function controls how long your fax
machine waits between each automatic redial attempt. Avail-
able settings are from 1 to 6 minutes. (In FRE, the available set-
tings are 1-12 minutes.)
9. Press the YES key to confirm your selection.
DIAL TONE DETECT: This function allows your fax machine
to wait for and detect a dial tone before proceeding with dial-
ing. Available settings are on and off.
10. Press the Select Function key to finish.
Note: Occasionally, your fax machine may not be able to detect
the ring pattern on its first try. If this happens, the display
changes to DISTINCTIVE RING SET, RESULT=NG. If this
happens, follow the above instructions again.
BUSY TONE DETECT: This function allows your fax machine
to detect a busy tone when sending a fax. Available settings are
on and off.
Dial Parameter Settings
MF(TONE)/DP(PULSE): This function controls what method
your fax machine uses for dialing. Two dialing methods are in
common use. DP, or dial pulse dialing, uses monotone pulses to
dial a number (like a rotary telephone). MF, or multi-frequency
dialing (touch-tone), uses different tones to dial a number.
Available settings are MF and DP.
These functions allow you to control the way your fax machine
dials telephone numbers. Refer to Dial Parameter Settings List to
determine which settings you may need to change, then refer to
“Changing Dial Parameter Settings” on page 59 to make the
change.
MF(TONE) DURATION: If your fax machine is set to tone dial-
ing, this function controls the duration of the tones used for
58
Download from Www.Somanuals.com. All Manuals Search And Download.
dialing (the tone duration varies in different countries). Avail-
able settings are 75 ms, 85 ms, and 100 ms.
Changing Dial Parameter Settings
SELECT
FUNCTION
9/OP
PBX LINE: Turn this function on if your fax machine is con-
nected to a PBX. Once this function has been turned on and the
dial prefix function has been programmed, your fax machine
will recognize the dial prefix number you use in your PBX to
get an outside line. After it dials your dial prefix number, your
fax machine pauses to wait for an outside line before dialing the
rest of the telephone number. Available settings are On and Off.
1: FUNC.PROGRAMMING
USER
PROG.
1. Press the Select Function key.
2. Press the 9/User Prog. One-Touch key. The display shows:
1:FUNC. PROGRAMMING.
3. On the numeric keypad, press 2. The display shows 2:DIAL
See “Connecting to a PBX” on page 28 in Installation for
instructions on changing this setting.
PARAMETER.
4. Press the YES key until the display shows the dial parameter
AUTO START: When enabled, your fax machine will automat-
ically begin dialing as soon as you have selected a location by
pressing a One-Touch key or entering an Auto Dial code. You
do not have to press the Start key. Available settings are On and
Off.
you want to change.
5. Repeatedly press the NO key until the setting you want
appears in the display.
6. Press the YES key to confirm your selection. The name of
the next dial parameter setting will appear in the display.
DIAL PREFIX: If your fax machine is connected to a PBX, use
this function to tell your fax machine what access number is
used to obtain an outside line from your PBX. You can enter up
to 4 digits. See “Connecting to a PBX” on page 28 in Installa-
tion for instructions on changing this setting.
7. Press the Select Function key to finish.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
fax, the Personal ID or telephone number of the remote fax
machine that sent the document will be printed. If you were
receiving a fax and the remote fax machine does not have a
Personal ID or telephone number programmed, no data is
printed.
Reports
– The communication mode used for each transmission or
reception.
– The number of pages sent or received.
– The result of each communication.
– Service codes.
Understanding Reports
Your fax machine provides a variety of useful reports, which help
you understand the current settings, programming, and
operations of your fax machine. Refer to the reports listing below
to determine which reports you may want to print, then refer to
“Printing Reports” on page 63 for instructions on printing a
report.
Note: This report does not contain the results of fax messages
which were received without errors and printed
immediately, i.e. only transmissions, receptions with
errors and memory receptions are recorded.
Activity Report
The activity report provides a communication record of your fax
machine. Information provided on this report includes:
Broadcast MCF (Confirmation) Report
Use this report to confirm the results of a multiple-location
transmission (or broadcast). Information provided on this report
includes:
– The total amount of time your fax machine spent sending faxes
and the total amount of time spent receiving faxes.
– The date, time and duration (S, R-TIME) of each transmission
or reception.
– The name or telephone number of the fax machine you were
communicating with (DISTANT STATION ID). If you were
sending a fax, the Personal ID or telephone number of the
remote fax machine that received the document will be printed.
If the remote fax machine does not have a Personal ID or
telephoned number programmed, the Location ID or telephone
number you entered will be printed. If you were receiving a
– The date and time at which the broadcast started.
– The total amount of time used to complete the broadcast.
– For each location, the Location ID or telephone number, the
number of pages sent and the result of the communication.
Note: If there have been no transmissions to multiple locations
(broadcast) then this report cannot be printed
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Active Memory Files Report
Telephone Directory
The active memory files report provides a list of all messages
stored in your fax machine’s memory, either documents waiting
for transmission or documents that have been received and not
yet printed. Information provided on this report includes:
This report provides a complete listing of all of the telephone
numbers programmed for the One-Touch keys, Auto Dial codes
and groups of your fax machine. The information includes:
– The Location ID and main fax number (TEL NO) for each One
Touch key and Auto Dial code.
RECEPTION: Prints out memory reception information.
ENTRIES lists the number of received messages stored up in
your facsimile unit’s memory. PAGES lists the total number of
pages received.
Note: One-Touch Parameters exist for not only One-Touch keys
but also Auto-Dial - A listing of all of the One Touch keys
and Auto Dial codes included in each group.
PERSONAL BOX: Prints out set up status of your Personal
Boxes (Confidential, Bulletin Polling). MODE describes the Box
types. ENTRIES list the number of received messages stored up
in each Box. PAGES lists the total number of pages in each Box.
– The alternate number (OR) for each One Touch key.
– The Communication Parameter settings (G3- ECHO, G3-
RATE) for each One-Touch key, and Auto Dial code.
Note: The standard parameter settings are ECHO and RATE.
POLLING TX/RX: Prints out information on polling reception
and polling transmission not using a Box. Polling transmissions
are indicated in the mode column along with the scanned number
of pages. Polling Reception lists the date & time sent, sender and
transmission mode.
Configuration Report
The configuration report provides a list of the current operational
settings of your fax machine that can be set by you. The
information includes:
TRANSMISSION: Prints out information on Delayed Fax and
Redialing Wait transmissions. (However, polling reception
information will be listed in the above POLLING TX/RX).
Transmission date & time, receivers and transmission modes are
listed.
– The current settings of all your fax machine’s user functions.
– The Sender ID (ID=), fax number (TEL NO.), forwarding
number and call back number (CALL BACK NO.) currently
programmed into your fax machine.
– The current setting of dial parameters for your fax machine.
– This report will not be printed out if there is no message stored
in memory.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
– Depending on the settings of your fax machine, a portion of the
page will be printed after the report (see 04:IMAGE IN MCF.
on page 53).
Protocol Dump
In the event of an obstruction to transmission, use the following
report to analyze the cause of the obstruction. Send this report to
the dealer or service center if so requested.
Confidential Reception Report
This report is automatically printed each time your fax machine
receives a confidential message into a mailbox. Information in
this report includes:
Other Reports
Message Confirmation Report
– The date the message was received.
– The total amount of time your fax machine spent receiving the
message (S, R-TIME).
– The Personal ID or telephone number of the fax machine you
were communicating with (DISTANT STATION ID). If the
Personal ID or telephone number has not been programmed by
the sending fax machine, no DISTANT STATION ID is
recorded.
– The number of the mailbox into which the message was
received.
– The number of pages sent or received.
– The result of the communication.
– Service Codes
This report provides information about your last single-location
fax transmission or polling transmission. To print, see “Printing
Message Confirmation Report” on page 63. Information in this
report includes:
– The date of the communication.
– The total amount of time your fax machine spent sending (S,
R-TIME).
– The Personal ID or telephone number of the fax machine you
were sending a fax to (DISTANT STATION ID). If the remote
fax machine does not have a Personal ID or telephone number
programmed, the Location ID or telephone number you
entered is printed.
– The communication mode used.
– The number of pages sent.
– The result of the communication.
– Service codes.
Broadcast Entry Report
Each time you program a multiple-location transmission (or
broadcast), your fax machine will give you the option of printing
this report to confirm your entries. Information in this report
includes:
62
Download from Www.Somanuals.com. All Manuals Search And Download.
– The Location ID of the One Touch keys and Auto Dial codes
you have selected.
– Telephone numbers you have manually entered using the
numeric keypad.
Printing Reports
SELECT
6/IJ
FUNCTION
1: ACTIVITY REPORT
NO
REPORT
PRINT
To access this report, generate a Broadcast. See “Perform a
Broadcast Operation” on page 42 for details.
This only applies to the reports available using the 6/Report
Print One-Touch key. The other reports are available as the
situation demands.
Power Outage Report
If the electrical power to your fax machine has been interrupted
and your fax machine had delayed transmissions or messages
received into memory, your fax machine automatically prints a
power outage report to alert you that fax messages have been
lost.
1. Press the Select Function key.
2. Press the 6/Report Print One Touch key. The display shows
1:ACTIVITY REPORT.
3. If not printing an Activity Report, press the NO key
repeatedly until the desired report appears on the display.
4. Press the YES key. The report will begin printing.
Printing Reports
5. Press the Select Function key to finish.
Printing Message Confirmation Report
After transmission, press the Copy key once (with no documents
loaded) to see a report confirming your transmission on the
display of your fax machine. To print the report, press the Copy
key a second time.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Codes
The following codes indicate the communication mode used for a
communication.
Codes Used In Reports
Result Codes
The following codes indicate the results of communications.
Code
Description
B.C.
Multiple-location transmission (broadcast).
Confidential reception (** is the box number)
A communication initiated by your fax machine.
A communication initiated by a remote fax machine.
One-time standard polling reception.
Bulletin polling transmission (** is the box number)
Polling transmission.
Code
Description
CONF=**
TX
BUSY
The other machine’s line was busy or there was no
answer.
RX
CANCL
A message was erased after being held in memory for
10 days.
POLL RX
POLL=**
POLL TX
FWD-T
FWD-R
COMP.
A multiple-location transmission was completed.
COVER
The fax machine’s cover was opened during the
communication.
Forward transmission
NO
The transmission or reception failed due to a
communication error.
Forward reception
OK
The communication was completed successfully.
PAPER
The communication failed because the receiving
machine ran out of paper.
PUNIT
R_JAM
Indicates a problem with the printing unit. Contact
your supplier.
A paper jam occurred in your fax machine while it
was receiving a fax, and your fax machine was unable
to receive the entire message in memory.
S_JAM
STOP
A document jam occurred in your fax machine.
The Stop key was pressed, ending the communication
session.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Pull out the jammed document.
Problem Solving
Clearing Document Jams
When a document jam occurs, your fax machine beeps and an
error message appears in the display. If the jammed document
looks like it is positioned straight in your feeder, press the Stop
key to try to feed the document the rest of the way through the
feeder. If this fails, follow the instructions below.
1. Grasp the control panel. Pull up and toward you until it
releases. Swing the control panel out of the way.
3. Push the control panel back down until it locks.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
jammed in the exit slot, lift the blue bar out of the way and
carefully pull the paper out.
Clearing Printer Paper Jams
If your fax machine displays PAPER JAM or NO PAPER when the
paper cassette still contains paper, there may be one or more
sheets of paper jammed in the machine. Clearing paper jams is as
follows:
O
A
O
U
A
S
A
E
E
O
Note: If you are experiencing many paper jams, it may be due to
the type of paper you are using. For best results, select a
paper, which has been developed specifically for
photocopying or laser printing. Be sure to fan the paper
before loading it into your paper tray.
1. Lift the document table and swing it out of the way.
3. Push the buttons on the side of the copy stacker until you
hear a click. Lift the copy stacker out of the way.
E
N
R
T
A
A
U
A
S
C
A
E
P
M
E
Y
OES
V
.
R
E
D
S
A
O
I
N
H
I
X
PH
K
I
I
2. Check for paper jammed in the slot where received faxes or
copies exit onto the document stacker. If you see paper
CAUTION: Never expose the image drum unit to light
for more than 5 minutes. Never expose the image drum
unit to direct sunlight. Always hold the image drum unit
66
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Pull out the paper cassette. If any of the paper in the paper
cassette is damaged, remove and replace it.
by the ends. Never touch the surface of the green drum
inside the image drum unit.
4. Lift the image drum unit out and set it aside. Keep it out of
direct sunlight and DO NOT touch the green surface of the
drum.
O
F
USH
P
H
S
PU
7. Push the paper down until it is under the plastic tabs.
5. Carefully pull out any paper you see jammed inside the
machine.
I
NC
R
L
I
R
U
H
.
T
DL
R
C
I
I
L
67
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Slide the paper cassette all the way back into your fax
machine.
down firmly on both of the locations on the image drum
marked “PUSH”.
I
U
SA
M
A
S
K
E
NML
USH
P
H
S
PU
10. Close the copy stacker and push down on it until you hear a
click. Be sure both slides are latched.
9. Place the image drum unit back into your fax machine. To
ensure that the image drum is positioned correctly, press
C
C
N
L
F
T
T
I
T
E
T
O
O
F
11. Close the document table.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Lift the document table into an upright position.
Replacing Toner Cartridge
The number of pages you can print with one toner cartridge
varies depending on the type of documents you usually receive or
copy. The first toner cartridge installed in a new image drum unit
will have a decreased yield because the image drum unit itself
has to be filled. Refer to “Part Numbers” on page 101 for the
toner cartridge replacement part number.
S
A
A
S
A
E
A
T
D
E
M
E
S
H
V
.
E
T
A
O
F
T
I
If your fax machine displays TONER LOW or REPLACE TONER
CART., replace the toner cartridge with a new one. However, if
the print density is high enough, you can continue to use the
toner cartridge without replacing it until the print density
becomes too low.
2. Push in the cover release buttons on the side of the copy
stacker until you hear a click. Lift the copy stacker.
If the print density becomes low even before your fax machine
displays TONER LOW or REPLACE TONER CART., gently wipe the
lens surface of the LED array (see Step 8 ). If the print density
does not improve, replace the toner cartridge. When your fax
machine’s display shows CHANGE DRUM, replace the image
drum unit.
IO
S
F
I
.
WARNING: Be careful when handling the toner cartridge. Do
not let toner spill on your clothing or other porous materials.
See Safety at the beginning of this User’s Guide.
3. Pull the colored lever on the old toner cartridge all the way
toward you. Carefully pull the old toner cartridge out of the
69
Download from Www.Somanuals.com. All Manuals Search And Download.
image drum unit. Dispose of it in the plastic bag you
received with your new toner cartridge.
CAUTION: Be careful not to insert the toner cartridge
backwards into the image drum unit.
5. With the ridged side facing up and the colored lever on your
right, insert the toner cartridge into the image drum unit.
Slide the left end of the cartridge in first, then lower the right
end into place.
T
C
I
U
R
H
L
I
H
4. Remove the new toner cartridge from its package and gently
shake it from side to side to distribute the toner. Then
carefully peel the white plastic tape from the bottom of the
toner cartridge.
6. Once the toner cartridge is in place, push the colored lever
all the way forward to secure it and release the toner.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Using the cleaning wipe provided in the package with your
new toner cartridge, gently wipe back and forth across the
full length of the LED array.
Press the Select Function key, then the 10/Printer Cleaning
One-Touch key and then the YES key.
Your fax machine prints a cleaning page to clean the image drum.
Repeat this procedure several times and then check whether you
still have dirty print-outs. If this procedure does not solve the
problem, your fax machine needs a new image drum unit.
Contact your dealer to order one.
A
T
E
O
S
K
S
O
F
G
T
If the faxes you receive are light or have vertical streaks in them
and you are not out of toner, or if your fax machine displays a
CHANGE DRUM message, your fax machine needs a new image
drum unit. Contact your dealer to order one. Refer to “Part
Numbers” on page 101 for the image drum replacement part
number.
The life of an image drum depends on a number of factors,
including temperature and humidity, the type of paper you use,
and the number of pages per job.
8. Close the copy stacker and push down until you hear the
copy stacker click into place. Be sure that the cover latches
on both sides.
9. Close the document table.
CAUTION: Never expose the image drum unit to light
for more than 5 minutes. Never expose the image drum
unit to direct sunlight. Always hold the image drum unit
by the ends. Never touch the surface of the green drum
inside the image drum unit.
CAUTION: Please abide by the disposal laws of your
country when disposing of replaced toner cartridges.
Replacing Image Drum Unit
If you have dirty print-outs then the image drum may have
accumulated toner on it.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Lift the document table into an upright position.
3. Remove the old image drum unit (with its toner cartridge),
wrap it in the packaging materials from your new image
drum unit and dispose of it following local regulations.
S
R
L
A
D
R
A
S
R
P
D
E
M
A
E
HY
V
E
P
S
D
L
I
X
C
O
C
F
I
USH
P
H
S
PU
2. Push in the cover release buttons on the side of the copy
stacker until you hear a click. Lift the copy stacker.
4. Take the new image drum unit out of its package and insert it
into your fax machine. To ensure that the image drum is
positioned correctly, press down firmly on both of the
locations on the image drum marked “PUSH.”
C
O
C
A
A
S
P
A
.
I
I
A
U
S
E
A
Y
E
K
P
S
L
M
E
N
X
P
SH
U
P
H
S
PU
72
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Install a new toner cartridge. Follow Steps 4 to 9 in
“Replacing Toner Cartridge” on page 69.
you are experiencing a problem, a service person may ask you to
check these counters.
6. With the copy stacker and document table closed, wait until
the time and answering mode appear on the display. Then
press the Select Function key.
Note: If the image drum unit has reached the end of its life, you
will also use this function to reset the drum counter. See
“Replacing Image Drum Unit” on page 71 for more
information.
SELECT
FUNCTION
SELECT
FUNCTION
7/KL
1. Press the Select Function key.
YES
2. Press the 7/Counter Display One-Touch key. The display
COUNTER
DISPLAY
shows DRUM COUNT.
3. Press the NO key again. The display shows the PRINT
7. Press the 7/Counter Display One-Touch key. The display
COUNT.
shows DRUM COUNT.
4. Press the NO key again. The display shows the SCAN
8. Press the YES key to clear the image drum unit counter.
COUNT.
9. Press the Select Function key to finish.
5. Press the Select Function key to finish.
CAUTION: Please abide by the disposal laws of your
country when disposing of replaced Image Drum Units.
Shipping the Fax Machine
CAUTION: DO NOT ship the fax machine with the
image drum unit installed unless it is a new fax machine
and has never been used.
Reading Print Counters
SELECT
SELECT
FUNCTION
7/KL
FUNCTION
3X
NO
COUNTER
DISPLAY
When shipping the fax machine, after it has been in use, please
follow the re-packaging procedure below:
1. Remove the image drum unit with toner cartridge from the
fax machine.
The print counters of your fax machine count the number of
pages your fax machine has printed or scanned in its lifetime. If
73
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Place the image drum unit with toner cartridge still attached
into a black plastic bag and keep it away from direct
sunlight.
ꢀ Nothing happens when you press the control panel
keys. Turn the fax machine off, wait 10 seconds, then
turn it on again.
ꢀ The display tells you to replace paper even though
there is paper in the paper cassette. Take the paper
cassette out and make sure that the paper is firmly
stacked in the tray. Push the paper firmly under the
plastic tabs on the edge of the tray. Check for a paper
jam in the fax machine.
ꢀ Your documents jam. Check the document for wrin-
kles, tears or other damage. Make sure there are no
staples or paper clips and that the paper is clean and
dry. Make sure the document is not wider than your
fax machine can load. Try making a copy of the doc-
ument on a photocopier and faxing the copy.
ꢀ Your fax machine will not dial. Check the power cable
and wall outlet. Make sure that your telephone line
(not your external telephone or handset) is connected
to the LINE outlet on the back of your fax machine.
If you have an external telephone connected, lift the
handset and check for a dial tone. If you do not have
an external telephone connected, press the Hook/V.
Request key and check for a dial tone. If you do not
hear one, there may be a problem with your tele-
phone line. If you do hear a dial tone, your fax
3. Re-package the fax machine and the image drum unit
separately into packaging material and a shipping carton.
Problem Checklist
Your fax machine is a complex machine with many features and
functions, which allow it to operate in different ways. Many
problems you experience may be due to improper programming.
If you are experiencing a problem, read through the list of
problems and solutions before calling your dealer.
ꢀ Your telephone does not ring if your fax machine is
set to tel/fax answering mode and the incoming call is
a voice call. This is normal. In the tel/fax answering
mode, your fax machine answers the incoming call
and detects whether if the call is a voice call or a fax
call. If the call is a voice call, your fax machine will
ring, but your telephone will remain silent. It is rec-
ommended that you only use tel/fax answering mode
if your telephone is located near the fax machine.
ꢀ The display is blank. Check that the power switch is
on. Check the power cord to make sure that it is
firmly plugged in. Check your wall outlet to make
sure that it has power.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
machine may be using the wrong dialing method
(pulse or tone) for your area. If you hear changing
tones instead of dialing pulses and you know that
your area uses pulse dialing, refer to the MF(TONE)/
DP(PULSE) dial parameter setting in Programming.
If your fax machine is connected to a PBX, make
sure you have instituted the correct programming to
work with a PBX (see Connecting to a PBX in Instal-
lation).
machine to wait for a dial tone. If you have frequent
problems communicating with a particular remote
fax machine, try programming the number into one
of your One-Touch keys and then changing the One-
Touch Parameters for that One-Touch key (see “Dial
Directories” on page 29). Lastly, either your fax
machine or the remote fax machine may need servic-
ing. Try sending a fax to another location to check
your machine.
ꢀ The display shows a communication error. This alarm
indicates any of a number of problems. You may be
trying to communicate with an incompatible fax
machine (your machine can only communicate with
ITU-T Group 3 fax machines). The remote machine
may not be able to perform the function that you
want, such as polling or confidential messages. The
remote machine may also be out of paper or experi-
encing a paper jam. Bad telephone line conditions
can also cause communication errors. Try sending
the fax again and check to make sure you are dialing
the correct telephone number. If you have to dial an
access digit to get an outside line, or if you are dial-
ing internationally, you may need to enter a pause
(using the Pause One-Touch key) after the access
digit or international dialing code to tell your
ꢀ You sent a fax but the image the remote fax machine
received was very poor. If your document had a lot of
small type, complex illustrations, photos, or was very
light or very dark, try changing your Transmit Reso-
lution and Type of Original settings (see “Loading
Documents” on page 34 in Basic Operations). Copy
the document on your fax machine to see how it will
transmit. The problem may be caused by telephone
line interference. Try sending the document again
later.
ꢀ You keep getting reports you do not want. Check
your user function settings and turn off the reports
you do not want. See “Customizing Features &
Operations” on page 53.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ You sent a fax but it was received completely blank.
Make sure that you have correctly loaded your docu-
ment face down.
is connected to the power outlet and the telephone
line is connected to LINE. Also check the reception
mode you are using. Your fax machine will not auto-
matically receive faxes in manual answering mode
[TEL]. See “Setting Answering Mode” on page 23 in
Installation.
ꢀ The image received on your fax machine was very
poor. Contact the person sending you the fax and ask
them to change their Transmit Resolution and Type
of Original settings. Ask the person to make a copy
of the document on their fax machine to ensure that it
is working properly. Then ask them to send the fax
again. If you still have a problem, try making a copy
of a document on your machine to make sure it is
working properly.
ꢀ You tried dialing with a One-Touch key or an Auto Dial
code but nothing happened. Make sure that the One-
Touch key or Auto Dial code you are using has been
programmed. Check the fax number to make sure it
was entered correctly (see “Dial Directories” on
page 29). When you are dialing with an Auto Dial
code, be sure to press the Auto Dial key before you
enter the code. If your fax machine has the Auto Start
feature turned off, you will have to press the Start
key before dialing will begin (see “Customizing Fea-
tures & Operations” on page 53).
ꢀ Your received documents are light or have vertical
streaks on them and you are not out of toner. Gently
wipe the lens surface of the LED array on your fax
machine and then see if the machine works properly
(refer to “Replacing Toner Cartridge” on page 69). If
your fax machine still does not work properly,
remove the image drum unit (refer to “Replacing
Image Drum Unit” on page 71), tap the toner car-
tridge, and slowly swing it 20-30 degrees vertically
several times. Be careful not to let the toner leak
from the cartridge. If this does not work, you may
need to replace your image drum unit. Contact your
dealer to get a replacement.
ꢀ You set your fax machine for delayed transmission
but it did not send. Check the display to make sure
that you have set the clock on your fax machine to
the correct time. See “Setting Time & Date” on
page 23 in Installation.
ꢀ Your fax machine does not answer the phone or
receive faxes. First check to see that the power cable
76
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ Your fax machine disconnected before you could
answer a voice request. You must answer a voice
request while the warbling tone is being emitted.
When you hear the warbling tone, press the Hook/V.
Request Key after picking up your handset.
ꢀ You want to answer an external telephone but your
fax machine always answers first. If you are using an
external telephone, change the user function setting
for ring response on your fax machine. See “Custom-
izing Features & Operations” on page 53.
ꢀ Someone tried to send you a confidential fax but
nothing happened. You must set up a mailbox before
anyone can send you a confidential fax. See “Receiv-
ing Confidential Faxes” on page 46 in Advanced
Operations. Make sure the person sending you the
fax knows the correct mail box number.
ꢀ Your fax machine will not poll a remote fax machine.
Call the person at the remote fax machine and make
sure that they have loaded documents and set their
fax machine in polling transmission mode. Check
also if their fax machine uses either standard polling
transmission or ITU polling transmission.
ꢀ Your fax machine is connected to a PBX and you can
not dial out. You must enter your access digit before
the telephone number for each number that you dial
or program into your machine. Also, your fax
machine must be programmed for PBX operations
before it will work. See “Connecting to a PBX” on
page 28 in Installation.
ꢀ Your received faxes sometimes look distorted. If the
document received is wider or longer than the paper
you have loaded into your paper tray, your fax
machine automatically reduces either the width or
the length of the document to fit on your paper. This
type of problem could also be communication
related.
ꢀ You are constantly receiving unsolicited advertising
on your fax machine. Try using the closed network
function. See “Rejecting Unsolicited Fax Messages”
on page 39.
ꢀ Your fax machine does not immediately switch to TEL
mode when you make or receive a voice call. Try
pressing the Stop key. Your fax machine will return
to standby mode so that you can converse. This con-
dition may happen infrequently due to telephone line
conditions, or the type of external telephone used. If
this problem happens often, consult your dealer.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
• “Internet Fax Reception” on page 80.
• “Network Settings List” on page 81.
• “Components of an Internet Fax” on page 81.
• “Helpful Hints (I-Fax)” on page 82
I-Fax
This section is intended as a quick-reference for using the I-Fax
feature. This section does not provide detailed explanations of
features or settings, as other sections provide these.
I-Fax, despite its complicated nature, is an easy-to-use feature.
The T.37 protocol allows your fax machine to send and receive
email over your LAN connection, without ever needing to be
hooked up to your computer. Note, if your email server uses
authentication, see important information “Authentication -
Unable To Send Global E-mails” on page 99.
To Use Internet Fax
• a Network Card must be installed in the machine
• the machine must be connected to a LAN
This section is divided into four primary areas.
1. “Operation Overview” on page 78
2. “I-Fax Network Set Up” on page 83
3. “I-Fax User Interaction” on page 94
4. “I-Fax Troubleshooting” on page 97
The Network Card for this machine can be connected to a
• 10 baseT
or
• 10/100baseTX LAN (will only operate at 10 base T).
To make a LAN connection, the following information must be
configured on this machine. Ask your network administrator
about these settings.
Each section will walk you through the setup and usage of this
product.
• an IP Address
• SubnetMask
Operation Overview
This overview has several sections to help you decipher and use
the I-Fax process easily.
• Default Gateway
If the LAN uses a DHCP server, it is not necessary to configure
these settings as the server will perform them automatically.
• “Operation Overview” on page 78.
• “What Your I-Fax Machine Can Do” on page 79.
• “Installation Requirements” on page 79.
• “Internet Fax Transmission” on page 80.
After setting the correct IP Address, SubnetMask and Default
Gateway, configure the machine for Internet Fax transmission/
reception.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and setup requirements may vary from system to
system.
What Your I-Fax Machine Can Do
I-Fax is a feature with many capabilities.
!
Machine Installation
This unit can:
Installation covers the physical procedures, such as removing the
unit from the shipping packaging, connecting the power,
telephone, and network lines, installing consumables.
• send and receive faxes via a Public Switched Telephone
Network (PSTN)
• send and receive faxes via the Internet (over a LAN)
• print via a Local Area Network (LAN) (Windows only)
• act as an email scanner (see “Backup/Archive (Email
Scanning)” on page 83
Installation may be performed by anyone.
Refer to “Installation” on page 15” for more information.
Network Setup
• act as a Gateway service
Setup covers the network installation procedures, such as
• act as a convenience copier
establishing the IP Addresses and configuring the network card.
Important!
!
A network administrator will perform setup.
Internet faxes differ from traditional faxes in these ways:
Customization
Customization covers the programming procedures, such as One-
Touch keys, machine settings, and network settings.
Although your OKIFAX has security features, faxes sent over
the Internet are more vulnerable to interception than faxes
sent over the PSTN.
You can perform some of the customization procedures. Others
must be performed by a network administrator.
There is no way to verify that a message has been received by
the machine to which it was addressed.
LAN Topologies and Operating Systems
Installation Requirements
LAN
10base-T Ethernet
Before the machine is used, three processes must be completed.
• Machine Installation
• Network Setup
• Customization
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Fax Protocols
SMTP Server Address / Name
1. Enter the SMTP server name or IP Address. If entering the
server’s IP Address, be sure to type the dots (full-stops)
dividing the numbers. Example: 192.168.1.1
TCP/IP
POP3
SMTP
DNS
Internet Fax Transmission
General Information
To send an Internet Fax message, you need a mail server from
which to send email.
2. You may enter a server name only if a DNS server has been
configured.
DNS Server’s IP ADDRESS
This setting is not required if the SMTP server has been specified
by its IP ADDRESS. A DNS server can convert a server name
into an IP ADDRESS.
Please consult your network administrator about the settings
listed below, which are required in order to make a connection
to the mail server.
Email Address
Enter the email address assigned to this machine.
• SMTP Server Address / Name
• DNS Server’s IP Address
• Email Address
These settings are similar to those of popular mail clients such
as Netscape Messenger, Outlook and Eudora.
Internet Fax Reception
General Information
To receive an Internet Fax message, a mail server is required for
sending email.
You can start transmission when these settings have been con-
figured.
Please consult your network administrator about the settings
listed below, which are required in order to make a connection
to the mail server.
To send a fax, place a document on the machine and press the
one-touch button on which the email address of the recipient
has been registered; the document will be scanned into memory,
converted into a TIFF file and sent to the recipient.
• POP Server Address / Name
• DNS Server’s IP Address
• POP Server User Name
• POP Server Password
80
Download from Www.Somanuals.com. All Manuals Search And Download.
The machine is ready to receive Internet Fax messages when
these settings have been configured. To receive a fax message,
the machine will access the server automatically at regular
intervals according to the POP Interval Time setting.
POP Server Password
Enter the password assigned to this machine for accessing the
POP server.
Network Settings List
List of Settings
If there is mail, the machine will print it out automatically.
This machine only receives TIFF files and text-format mail. It
cannot receive files in other formats (such as Word, Excel, and
certain formats of TIFF files).
1. “IP Address” on page 88
2. “Subnetmask” on page 89
POP Server Address / Name
1. Enter the POP server name or IP Address. When entering the
server’s IP Address, be sure to enter the dots (full-stops)
dividing the numbers. Example: 192.168.1.1
3. “Default Gateway” on page 89
4. “SMTP Server Name” on page 89
5. “POP Server Name” on page 89
6. “Pop User Id” on page 90
2. You may enter a server name only if a DNS server has been
configured.
7. “Pop Password” on page 90
8. “DNS P.SRV Address” on page 91
9. “DNS S.SRV Address” on page 91
10. “FAX Email Address” on page 91
DNS Server’s IP Address
This setting is not required if the POP server has been specified
by its IP ADDRESS. A DNS server can convert a server name
into an IP ADDRESS.
Components of an Internet Fax
A fax sent over the Internet has three components.
POP Server User Name
Enter the user name assigned to this machine for accessing the
POP server.
• Header
• Email
• TIFF attachment(s)
Your ability to receive, view, or print these components will vary
according to the settings of different functions.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
• Operate the machine
• Save money
• Save time
Header
The header includes all routing information for the path your
Internet Fax followed from the time it was sent to the time it was
received.
PSTN Faxing vs. Internet Faxing
PSTN Faxing is fax communication conducted via telephone
lines, with which you are probably familiar. PSTN Faxing
requires telephone numbers and telephone lines.
The header is automatically generated as part of the Internet
Faxing process.
Email
Internet Faxing is fax communication conducted via the Internet
which resembles email communications more than it does PSTN
faxing. Internet Faxing requires email addresses, mail servers,
Internet connections, and fax machines capable of Internet
Faxing.
The email includes the To, From, and Date information. It may
include RE: (Subject) and body text (email message).
The To, From, and Date information are automatically generated
as part of the Internet Faxing process. However, they are based
on information programmed by the user.
Internet Fax
The subject and message (if used) can be determined by the user.
Internet Fax is a term with several meanings, depending on
context. Internet Fax can mean
Attachment(s): TIFF or PDF
The TIFF or PDF attachment(s) are the “fax” part of the Internet
Fax. The content of the TIFF attachments is determined by the
end user. The conversion to TIFF or PDF and file handling are
part of the Internet Faxing process.
• Fax communication conducted via the Internet.
• A fax machine capable of Internet Faxing.
• Τhe document (fax) sent via the Internet.
Note: If the receiver is another OKI I-Fax device, the format must
be TIFF as the OKI devices cannot receive PDF.
Email Addresses vs. PSTN (Phone) Numbers
You can combine email addresses and telephone numbers in one
communication session.
Helpful Hints (I-Fax)
Your fax machine has many features and capabilities that will
help you
You can send a fax to several email addresses or several
telephone numbers, or a combination of email addresses and
telephone numbers.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Status of Server
I-Fax Network Set Up
Internet Faxing is conducted over the Internet via network
servers. If the servers are down, running slowly, or experiencing
other problems, Internet Faxing will be adversely affected.
Settings for the machine are located in two places.
Backup/Archive (Email Scanning)
You can use your fax machine to create digital versions of
documents you only have in hardcopy form.
• Settings stored on the fax machine
• Settings recorded on the network card
Each section below is categorized by the Menu listings found in
the fax machine. They are as follows:
1. To do this, send the document as an Internet Fax to your
email address.
• “I-Fax NIC Settings” on page 85
• “POP Interval” on page 87
• “Network Settings” on page 88
• “I-Fax NIC Initialize” on page 91
2. When the document is scanned, a TIFF version of the
document is created. By sending it to yourself, you will
have a digital version of the hardcopy document.
3. You can then use various software packages to work with the
digital (TIFF) version, such as an Optical Character
Recognition (OCR) software package.
Identifying Current Settings on Fax Machine
The Configuration Report lists the current settings of the
facsimile machine and the network card.
Print the Configuration Report
1. Press the Select Function key.
2. Press the 6/Report Print One-Touch key. The display will
show 1:ACTIVITY REPORT.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Using the numeric keypad, press 5. The display will show
NO
3. Press
to scroll through the features available for
5:CONFIGURATION.
NIC Options.
YES
4. Press
. The report will print.
Text Print
I-Fax NIC
Settings
Header Print
I-Fax NIC Options
The following lists the available options for setting up and
adjusting the Network Interface Card (NIC) functions.
Coding Mode
Ex.Fine Mode
Sender ID (Email)
Send File Format
Send Notification
I-Fax NIC Update
To access:
SELECT
FUNCTION
9/OP
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
TUV
On/Off
POP Interval
8
USER
PROG.
IP Address
Network
Settings
Subnet Mask
1. Press Select Function to enter the menu.
Default Gateway
SMTP Server Name
POP Server Name
POP User ID
2. Press 9/USER PROG to enter the programming menu and
then press keypad 8 for I-FAX NIC OPTIONS and press
YES
to enter the menu.
POP Password
DNS P.SRV Addr.
DNS S.SRV Addr.
Fax Email Addr.
Yes/No
I-Fax NIC
Initialize
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Whether or not to print the body text of email. If this setting is
ON, the text in an email message is printed out. Please note that
only US-ASCII characters in the text can be printed as shown in
the following table. Any characters that cannot be printed will
be shown as spaces. Depending on the email client used, text
may not be printed or come out garbled.
I-Fax NIC Settings
The I-Fax NIC settings can be accessed using the following:
SELECT
FUNCTION
9/OP
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
TUV
8
USER
PROG.
Note: Text is not generally base64 encoded and coded text is not
supported (coded text is received, where the text in a coded
condition is printed.)
1. Press Select Function to enter the menu.
2. Press 9/USER PROG to enter the programming menu and
then press keypad 8 for I-FAX NIC OPTIONS.
- Two or more sections of text are all printed. A line (98
hyphen characters) is added between text files (including body
copy) and a linefeed is created before and after the line.
Between a header and a text file (including body copy), no line
is added and one linefeed is inserted.
YES
3. Press
to enter I-FAX NIC SETTINGS.
Explanations of each function follow this list.
• Text Print
• Header Print
- The MIME header of the attached file is not printed.
• Coding Mode
• Ex.Fine Mode
• Sender ID (Email)
• Send File Format
• Send Notification
• I-Fax NIC Update
- A blank line in the top of TEXT is eliminated in print and will
not be printed.
- In Microsoft Outlook or Lotus Notes, there is a setting to
send an Email body using HTML format. When set, the body
will be sent in both TEXT and HTML. If both are received,
Internet Fax will print only the TEXT portion. However, if the
setting is HTML format and there is an attached HTML file,
then the HTML portion will be printed, albeit with extra
characters associated with HTML. When Outlook is used,
please use TEXT as the sending format for printing.
Text Print
• Settings: ON or OFF
• Default: ON
85
Download from Www.Somanuals.com. All Manuals Search And Download.
• TYPE1: Print SUBJECT/FROM/TO
• TYPE2: Print all header information
This setting is only valid when the TEXT Print setting is ON.
0
1
2
SP
!
3
0
1
2
3
4
5
6
7
8
9
:
4
@
A
B
C
D
E
F
5
P
Q
R
S
T
U
V
W
X
Y
Z
[
6
‘
7
p
q
r
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
a
b
c
d
e
f
Coding Mode
• Settings: MH, MR, MMR
• Default: MH
This is the coding mode for TIFF file images sent by Internet
Fax. Select the option desired.
#
$
s
t
Ä
ä
%
&
u
v
w
x
y
z
{
Compression Rates:
Ö
ö
MH
low
G
H
I
g
h
i
MR
medium
high
(
)
MMR
The default setting is MH.
*
+
,
J
j
Often, other manufacturers’ Internet Fax products support
only MH.
;
K
L
k
l
!
<
=
>
?
\
|
Ü
ß
ü
-
M
N
O
]
m
n
o
}
Ex.Fine Mode
• Settings: 300 dpi or 600 dpi
• Default: 300 dpi
.
^
~
/
_
Scan resolution of EX.FINE mode for Internet Fax is 300 dpi or
600 dpi: 300 dpi is faster while 600 dpi is higher quality.
Header Print
• Settings: TYPE 1, TYPE 2, or OFF
• Default: TYPE 1
• OFF: Do not print header
Sender ID (Email)
• Settings: ON or OFF
86
Download from Www.Somanuals.com. All Manuals Search And Download.
• Default: ON
This setting allows updates to the firmware when YES is
enabled. Usually this option is not required except when a
firmware update is released and run from a client machine.
Adds the sender ID to the main body of images scanned by
Internet Fax.
This setting will always apply when using Internet Fax, regard-
less of the setting for 4:SYSTEM DATA PRG. When using
Internet Fax as an email scanner, turn this setting OFF to pre-
vent the sender ID data from appearing in scanned images.
POP Interval
• Settings: Off/1min/5min/10min/30min/60min/Daily
• Default: OFF
POP Interval can be accessed using the following:
SELECT
Send File Format
• Settings: TIFF or PDF
• Default: TIFF
9/OP
YES
FUNCTION
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
TUV
8
USER
PROG.
NO
This determines whether the format sent is either PDF or TIFF.
1. Press Select Function to enter the menu.
Note: Oki facsimile machines cannot receive PDF faxes.
2. Press 9/USER PROG to enter the programming menu and
then press keypad 8 for I-FAX NIC OPTIONS.
Send Notification
• Settings: ON or OFF.
• Default: ON
When sending an email from the I-Fax device, the body of the
email has a message which indicates that an attachment is
included. The message varies, depending on the setting of Send
File Format (TIFF or PDF).
YES
3. Press
4. Press
to enter I-FAX NIC OPTIONS.
NO
until POP INTERVAL appears.
YES
5. Press
to enter POP Interval.
6. Select either YES or NO to select the interval time desired.
This determines how often the machine will check for incoming
transmissions from the POP mailbox. Select the option desired.
OFF sets the machine to not check for incoming transmissions.
I-Fax NIC Update
• Settings: YES or NO.
• Default: YES
87
Download from Www.Somanuals.com. All Manuals Search And Download.
YES
YES
3. Press
4. Press
to enter I-FAX NIC OPTIONS.
Daily
Daily sets the machine to check the mail server once a day.
Thus, it is required that the time of day is set for this option.
NO
until NETWORK SETTINGS appears.
POP INTERVAL
)
POP INTERVAL TIME
[TIME1] YES ( NO(
YES
YES
5. Press
to enter NETWORK SETTINGS.
[DAILY] YES (
NO(
)
)
)
6. To advance to each function within Network Settings, use
POP INTERVAL TIME
[__:__] PRG. TIME 0-9
the Start key.
7. To set each function, utilize both the numeric keypad and the
one-touch keys for easy access to commonly used symbols.
An explanation for each option listed below follows.
– “IP Address” on page 88
– When the DAILY setting is selected, the time of day when the
mailbox is polled requires setting. There are four different time
settings available.
– If the POP INTERVAL TIME is not registered, then the auto POP
receiving action will not occur.
– After POP INTERVAL TIME is registered, even if the setting is
changed from DAILY to another one, the POP INTERVAL TIME
setting will not be lost.
– “Subnetmask” on page 89
– “Default Gateway” on page 89
– “SMTP Server Name” on page 89
– “POP Server Name” on page 89
– “Pop User Id” on page 90
Network Settings
– “Pop Password” on page 90
This function modifies these network settings. The I-Fax Net-
work settings can be accessed using the following:
SELECT
– “DNS P.SRV Address” on page 91
– “DNS S.SRV Address” on page 91
– “FAX Email Address” on page 91
9/OP
YES
FUNCTION
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
TUV
8
USER
PROG.
NO
IP Address
Sets the IP address.
1. Press Select Function to enter the menu.
2. Press 9/USER PROG to enter the programming menu and
then press keypad 8 for I-FAX NIC OPTIONS.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
• When 0.0.0.0 is set as the IP address, the DHCP function
automatically starts. If a DHCP server is found, an IP
address is obtained from the DHCP server.
• From then on, an IP address is obtained from the DHCP
server each time the power is turned OFF and ON; therefore,
it is not necessary to change the IP address. When an IP
address is obtained from the DHCP server, the address is
displayed and an asterisk (*) appears at the end.
• If you wish to set a fixed IP address, input the IP address
(numbers). Other than the IP address, a SUBNET MASK,
DEFAULT, GATEWAY, and DNS SERVER address are also
obtained from the DHCP server automatically. Sometimes
they cannot be obtained depending upon the setup of the
DHCP server. In such a scenario, set each address one at a
time.
1. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
YES
NO
2. To jump to the next field, use the
key.
or
3. Press the Start key to enter your settings.
Restrictions
• If DNS has not been set, enter the IP address of the server.
The address must include the “.” (period) dividers (e.g.,
192.168.4.123).
• Up to 64 characters may be entered.
• You may use Latin letters, numbers and symbols.
• To enter symbols, use either one-touch keys or key “0” of the
numeric ten-key pad.
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?
· @ ? ” _ % ~
Subnetmask
Sets the subnet mask.
• The “~” (tilde) symbol shows on the display as “-1”.
• The ” and ’ symbols cannot be used.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
Default Gateway
Sets the default gateway address.
POP Server Name
Enter either the IP address or the host name of the POP mail
server.
SMTP Server Name
Enter either the IP address or the host name of the SMTP mail
server.
If the DNS name of the POP server does not work, try entering
the IP address of the POP server.
If the DNS name of the SMTP server does not work, try
entering the IP address of the SMTP server.
!
!
89
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
YES
NO
2. To jump to the next field, use the
key.
or
YES
NO
2. To jump to the next field, use the
key.
or
3. Press the Start key to enter your settings.
Restrictions
• Up to 16 characters may be entered.
3. Press the Start key to enter your settings.
• You may use Latin letters, numbers and symbols.
Restrictions
• To enter symbols, use either one-touch key 20 or key “0” of
the numeric ten-key pad.
• If DNS has not been set, enter the IP address of the server.
The address must include the “.” (period) dividers (e.g.,
192.168.4.123).
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?
· @ ? ” _ % ~
• Up to 64 characters may be entered.
• The “~” (tilde) symbol shows on the display as “-1”.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
• You may use Latin letters, numbers and symbols.
• To enter symbols, use either one-touch keys or key “0” of the
numeric ten-key pad.
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?
· @ ? ” _ % ~
Pop Password
• The “~” (tilde) symbol shows on the display as “-1”.
• The ” and ’ symbols cannot be used.
1. Enter the password registered on the POP3 server, which
must be alphanumerical characters of no more than 16
characters long.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
2. If a password has already been entered, it is shown as
XXXXXXXXXXXXXXXX (sixteen Xs).
Pop User Id
Enter the user ID registered on the POP3 server.
3. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
1. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
YES
NO
4. To jump to the next field, use the
keys.
or
90
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the Start key to enter your settings.
• Sets the IP address of the DNS secondary server.
• Change this setting only when a secondary server has been
set up.
Restrictions
• Up to 16 characters may be entered.
• POP USER ID and POP PASSWORD settings in the fax
machine must match the POP3 user name already entered in
the server.
• You may use Latin letters, numbers and symbols.
• To enter symbols, use either one-touch keys or key “0” of the
numeric ten-key pad.
FAX Email Address
1. Enter the email address assigned to your machine. Press the
Number keys to insert either text or numbers. Press them
repeatedly to enter the character desired.
YES
NO
2. To jump to the next field, use the
key.
or
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?
· @ ? ” _ % ~
• The “~” (tilde) symbol shows on the display as “-1”.
• The ” and ’ symbols cannot be used.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
3. Press the Start key to enter your settings.
Restrictions
• Up to 64 characters may be entered.
• You may use Latin letters, numbers and symbols.
• To enter symbols, use either one-touch keys or key “0” of the
numeric ten-key pad.
DNS P.SRV Address
DNS = Domain Name Service.
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ? ·
@ ? ” _ % ~
P.SRV = Primary Server.
• The “~” (tilde) symbol shows on the display as “-1”.
• The ” and ’ symbols cannot be used.
• Sets the IP address of the DNS primary server.
• Do not change this setting if the server is connected directly
using its IP address.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
DNS S.SRV Address
DNS = Domain Name Service.
I-Fax NIC Initialize
This resets the Network Card to its original factory settings.
Verify that you want to do this before proceeding because when
S.Serv = Secondary Server.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
resetting the Network Card to factory settings, all current set-
tings are lost.
• To enter symbols, use either one-touch keys or key “0” of the
numeric ten-key pad.
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ? ·
@ ? ” _ % ~
1. Press Select Function to enter the menu.
2. Press 9/USER PROG to enter the programming menu and
• The “~” (tilde) symbol shows on the display as “-1”.
• The ” and ’ symbols cannot be used.
then press keypad 8 for I-FAX NIC OPTIONS.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
YES
3. Press
4. Press
to enter I-FAX NIC OPTIONS.
NO
until I-FAX NIC INITIALIZE appears.
Program OT Email Addresses
Programming Email addresses can be accomplished using the
following procedures:
YES
5. Press
twice to reset the network card.
Note: The message “ARE YOU SURE?” will appear on the
display. You must confirm your choice before the unit will
reset to factory defaults.
If
SELECT
FUNCTION
NO
8/MN
OT
LOCATION PROGRAMING
ENTER(SRCH,OT,A/D,#)
LOCATION
PROG.
YES
If
Email Settings
START
START
EMAIL:
_
CAPS OFF
SEND FILE FORMAT
[TIFF] YES( ) NO ( )
Registering Addresses
Email addresses up to 64 characters long can only be assigned to
one-touch keys 01 to 10. It is also possible to program a group of
email addresses and assign the group to a one-touch dial number.
However, one-touch dial numbers for both email addresses and
telephone numbers cannot be assigned to a single group.
PDF
SENDER ID (EMAIL)
[ ON ] YES( ) NO ( )
1. Press Select Function to enter the menu.
2. Press 8/LOCATION PROG to enter the programming menu.
Then press OT (One-Touch) key where you wish to program
the email address.
Restrictions
• Up to 64 characters may be entered.
• You may use Latin letters, numbers and symbols.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press 8/LOCATION PROG to enter the programming menu
NO
3. If the display does not read EMAIL, press
. Then
and then press # key to enter Group programming.
3. Using the numeric keypad, enter the group location desired,
1-10. Example: To enter location 2, press 02.
YES
press
to begin entering the email address. Use
the 1/CAPS key to turn on/off caps.
4. The display will show the number of your current group and
SELECT LOC.(S). You can now add a location to your group
(or delete a location from it). Refer to the instructions below.
4. When finished, press the Start key to enter your settings.
5. Select either TIFF or PDF for the default send format for the
YES
email address entered by pressing
NO
or
To do this
Do this
.
Add a One-Touch
location
Press the One-Touch key. Press the Start key to enter the
location. Repeat as necessary.
6. Select if you would like the Sender ID to appear in the image
as the default for the email address entered by pressing
Delete a previously Press the programmed One-Touch key. Press the Start key to
added email delete it. Repeat as necessary.
Search for a location Press the Search key continuously (or use the numeric
by name to add or
delete
YES
NO
or
.
keypad) until the location you want appears. Press the
START key to add or delete it.
7. Press another OT key to program or press the Stop key until
you have exited programming.
5. Each group can contain up to a maximum of all of the One-
Touch locations available on your fax machine.
Program Group Email Addresses
Email Groups are clusters of email addresses tied together to a
Group setting, allowing you to send a document to multiple
email addresses. Once you have programmed multiple email
addresses to OT keys, then you are able to program email
groups. Telephone Fax numbers can also be programmed into
the same Group setting as well.
NO
6. When you are finished programming, press
. The
display will show LOCATION PROGRAMMING.
7. To program another group, return to Step 3. If you are
finished, press the Select Function key.
Programming email groups can be accomplished using the fol-
lowing procedure:
1. Press Select Function to enter the menu.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Email Key Options
I-Fax User Interaction
Sending Email
Sending emails can be accomplished in the following ways:
1. Manually entering an email with the Email key.
2. Using a preprogrammed One-Touch key.
3. Using the Group Email setting.
Setting
Description
1: To
The email address you are sending to.
2: From
The email address you would like to appear as the return
address. The default is the fax machine’s own
programmed email.
3: Subject
Enter the subject of the email. If no subject is entered,
then “Internet FAX Message from [Sender ID]” appears.
4: Send File Format
5: Sender ID
TIFF or PDF encoding. Normally TIFF is best.
Yes, to have the Sender ID appear on the email.
Prints a report on the email addresses entered.
Displays the email address entered.
6: Confirm Report
7: Display (To):
8: Display (From):
4. Using the Broadcast feature.
Displays the email address entered.
Email Using Email Key
4. Press the number key for the setting desired from the choices
A document can be sent to an email address by manually
entering the address using the numeric keypad.
YES
listed above. Press
to enter the setting; press
NO
to advance in the list. Enter the information
1. Place a document in the machine.
required.
2. Press the Email key.
3. Either begin entering an email address directly using the
numeric keypad, or press the Email key again to setup the
options for this email.
YES
5. Depending upon the setting, press either
or the
the Start key to save and exit.
6. Select another email setting (1-8) or press the Start key
again to email the document.
7. Press the Stop key to exit without emailing the document,
press Stop key again to remove the document.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
selected twice, the document will be sent only once. This feature
requires email addresses and/or fax numbers already
programmed to a Group location. Refer to “Program Group
Email Addresses” on page 93 for further details.
Email Using OT Key
A document can be sent to an email address (or several email
addresses) by pressing pre-programmed one-touch keys, but
cannot be sent to recipients with telephone numbers registered on
One-Touch keys.
If both an email address and a fax number are grouped together,
the machine will first send the document to the email address and
then the fax number.
1. Place a document in the machine.
2. Press the One-Touch key at which the recipient’s email
1. Place a document in the machine.
address is assigned and press the Start key.
2. Press the Auto Dial key and then the # key.
3. After storing the document’s image data in memory, the
machine will establish a server connection and a SENDING
message will display. At the end of the transmission, the
result will be displayed on the LCD and a buzzer will sound.
3. Using the numeric keypad, enter the Group location desired,
1-10, and press the Start key. Example: To enter location 2,
press 02.
4. ENTRY IS OK? will appear. Press the Start key again to
Notes:
email the document.
• To type in the full email addresses, select the Email key to
enter each email addresses individually. Refer to “Email
Using Email Key” on page 94 for further details.
• To stop transmission, press the Stop key. The transmission
will be terminated at once without asking for confirmation.
Press the Stop key again to remove the document.
• Internet Fax data is scanned into memory before
transmission. If the document is too large for the memory
capacity, make two or more transmissions.
Email Using Broadcast Feature
A document can be broadcast to email addresses and fax
numbers by quickly selecting preprogrammed One-Touch keys.
Refer to “Program Group Email Addresses” on page 93 for
further details.
1. Place a document in the machine.
2. Press the One-Touch keys desired quickly in succession. For
example, pressing OT1 and OT3 will tell the machine to
email/fax to those programmed numbers.
Email Using Group Email Setting
A document can be sent to several email addresses by selecting
the appropriate Group setting. If the same email address is
3. Press the Start key and the document will be scanned and
sent.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Email
YES
2. Press
for the Fax machine to poll the email
server for email. If email is present, several screens will
appear and the email will print. If not, no record of the
transaction will be made.
This fax machine automatically connects to the server to receive
mail according to the setting “POP Interval” on page 87. If there
is mail on the server, reception will start automatically. If there is
more than one mail message, it will receive all the messages and
print them out automatically.
3. If there is a connection problem, the following screen will
appear:
If automatic reception takes place and there is no mail, no record
of the transaction will be made. In the case of manual reception,
service code F941 will be recorded if there is no mail.
COMMUN.ERROR
Recheck the connections and try again.
The machine cannot print out any other format than TIFF or Text
(*.tif and *.txt). If it receives a file other than those, a
communication error will occur and an error report will be
printed.
Notes:
• Internet Fax receives mail in memory. Check to make sure
that there is a sufficient free memory space to receive fax
messages. If there is not, reception of a message may be
terminated before reception is completed.
• The size of TIFF that can be received with Internet Fax is
approximately half the size of the memory capacity. A
memory full message may appear when receiving a large-
sized original. If this occurs, have the original sent in
sections.
Manual Email Reception
Requesting a manual reception of email is accomplished using
the following procedure.
SELECT
9/OP_+
FUNCTION
9:INTERNET RX
WXYZ
YES
YES ( ) NO( /1-9)
9
USER
PROG.
INTERN
START
INTERNET RX
PRESS START TO RX
RECEIVING
1. Press Select Function → 9/USER PROG → numeric
keypad 9 for INTERNET RX.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
POP3 Communication
I-Fax Troubleshooting
The service code for a POP communication is prefixed with the
letter F.
Error Description
If a communication error occurs, check the service code shown
on the Activity Report.
0000 Normal Shutdown
F001 Normal shutdown (only text received)
F002 Normal shutdown (only text received but cannot print)
F059 Failed in POP connection
SMTP Communication
The service code for a SMTP communication is prefixed with the
letter E.
F074 Cable not connected
F076 DNS cannot resolve POP server name
F077 No response from POP server
Error Description
F078 Incorrect POP user name/password
F079 Error generated in POP command sequence
F105 Reception attempted when POP server was not set
F106 Reception attempted when POP user name was not set
F107 Reception attempted when POP password was not set
F113 Failed in updating NIC firmware ... firmware before updating remains
F401 IP address not set
0000 Normal Shutdown
9080 Press stop key
E058 Failed SMTP connection
E074 Cable not connected
E081 DNS cannot resolve SMTP server name
E082 No response from SMTP server
E083 Error generated in SMTP command sequence
E108 Transmission attempted when destination was not set
E109 Transmission attempted when mail address of own device not set
E110 Transmission attempted when SMTP server not set
F931 Unreceivable email (TIFF NG)
F932 Unreceivable email (other than TIFF NG)
F940 Memory full
F941 When mail does not exist in server upon manual reception
F942 Command timeout
E401 Communication was attempted when the IP address of the device was not
set.
F990 Other error
E942 Command timeout
E990 Other error
FF00 Option board I/F error
EF00 Option board I/F error
Note: For service codes F001 and F002, the number of pages in
the report will be left blank.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
• TIFF or PDF transmission file formats are available. You can
also specify the format using the Email key with every
transmission. You can change the default transmission
format here, “Send File Format” on page 87.
Transmission Troubleshooting
Transmission fails; a communication error occurs.
• Are the IP ADDRESS, SubNet Mask and Default Gateway
settings correct?
Reception Troubleshooting
Reception fails; a communication error occurs.
• Has the SMTP server been configured correctly?
• If using DNS, is the DNS server address correct?
• Check to make sure that the server is not down.
• If DNS is ON, some servers may cause an error.
• Are the IP ADDRESS, SubNetMask and Default Gateway
settings correct?
When one-touch key is pressed with an email address assigned, a
warning message appears on the LCD.
• Has the POP server been configured correctly?
• If using DNS, is the DNS server address correct?
• Is the USER ID correct as registered on the POP server?
• Is the password correct as registered on the POP server?
• Has an email address been assigned on this machine?
LCD shows message “OPTION BOARD ERROR”.
Reception does not start.
• A network card I/F error has occurred - turn the power off
and on again to recover.
• Has the POP interval been set to OFF? Check “POP
Interval” on page 87.
The TIFF file sent cannot be printed out on the receiver.
• Is there a sufficient free memory space? Images have to be
first stored in memory and cannot be received if there is not
enough space. Have the message resent in smaller pieces if
possible.
• Is the file sent at EX-FINE resolution or in coding mode
other than MH? I-Fax simple mode Internet Fax products
support only the STD and FINE resolution settings and MH
coding mode.
When receiving data manually, a warning message appears on
the LCD.
The Sender ID is added to the subject when transmitted?
• The Sender ID (Email) setting is ON and the subject is not
entered. Either enter a Subject when sending an email or
turn off the “Sender ID (Email)” on page 86.
• Are the POP server or USER ID registered?
The LCD shows message OPTION BOARD ERROR.
• A network card I/F error has occurred - turn the power off
and on again to recover.
I want to send it by PDF.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
A communication error occurs during reception and a report is
printed out.
Authentication - Unable To Send Global E-mails
Symptom
• The received file is not of a format supported by this
machine.
The machine can receive emails from both inside a local net-
work, and globally from outside a local network. It can send
emails to anyone on the local network, but it cannot send emails
to anyone outside the local network.
Data is sent from an email client on a PC to the Fax machine, but
the reception has failed.
• Is the TIFF format used supported by this Internet Fax?
• If only a text has been sent, it will not be printed out unless
the TEXT PRINT setting is ON.
• Some email clients send email using unusual formats which
this fax machine cannot receive.
Cause
If all of the parameters on the T.37 have been configured prop-
erly, the problem may be that the mail server requires “authenti-
cation” as most mail servers can be configured to require
authentication. If this is enabled on the mail server, it will pre-
vent the machine from sending any global email, since the Oki
T.37 card does not currently support this feature.
The fax machine prints out a large number of meaningless
characters.
• It may be printing out a file format that the machine cannot
decode. If this occurs, ask the sender to resend the fax using
TEXT only format.
Resolution
Any changes to allow the machine to send global emails would
have to be made at the mail server itself. The network adminis-
trator needs to configure the mail server not to require authenti-
cation from the IP address the machine has been assigned. The
administrator may not want to do this for security reasons, but it
is the only method available that allows the machine to send
emails outside of the local LAN.
Communication errors occur, and service code F078 is given
each time.
• The POP server password or user ID may be wrong, causing
the server to return authentication errors.
Can PDF files be received?
• PDF files can be sent but cannot be received.
Additional Info
Many networks today use Microsoft Exchange as their mail
server, with authentication enabled. Microsoft does have a
white paper (Q255125) on their web site that explains how to
99
Download from Www.Somanuals.com. All Manuals Search And Download.
exempt one IP address from requiring authentication. It can be
found by doing a search of Microsoft's Knowledge Base at
http://www.microsoft.com.
Specifications
Category
Specifications
Type/compatibility
Applicable network
Transmission Speed
Desktop ITU-T G3 transceiver
PSTN, PBX, LAN, T.37
Up to 33,600 BPS
Automatic fall back
Communications
Coding scheme
Half duplex
MH/MR/MMR
Horizontal resolution
Vertical resolution
300dpi TX/RX, 600dpi TX (interpolation)
3.85 line/mm (standard)
7.7 line/mm (fine)
15.4 line/mm (ex. fine; TX and copy)
300 dpi
600 dpi TX (interpolation)
64 shades of gray
Halftone transmission
Document size
Recording paper
Effective scan width
Weight
A4, A5, letter or legal size
Plain paper, A4, letter or legal size
8.03" (204 mm)
28.66 lbs (13 kg) approx. (excluding paper)
2 rows of 20 characters, LCD panel
Display
Dimensions
Approx. 13" / 330 mm (W) x 16.9" / 430 mm (D) x
9.6" / 245 mm (H) (excluding document tray and
document stacker)
Power
AC120V 10% VAC, 50/60 Hz 2%
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Category
Specifications
Part Numbers
Operating conditions
Relative humidity 20%-80% (non-condensing)
Temperature 50°F/10°C to 89.6°F / 32°C
Consumables
30 pages maximum (20 lbs / 75g/m2 at
Letter / A4 size)
Document feed
Part Number
Description
52106701
56116901
41261301
Toner Cartridge Kit, Type 5 TL
Image Drum Kit, Type 5 (F)
Note: Horizontal resolution of 300 dpi is used if the remote fax
machine also uses 300 dpi. Also, 300 dpi is used if
EX.FINE is selected for copying.
Sheet: One Touch (1-40, Both Levels)
Options
Part Number
Description
40755302
40755312
40755322
70029401
70031801
2 MB Memory Expansion Kit
4 MB Memory Expansion Kit
8 MB Memory Expansion Kit
2nd Paper Tray Kit (UST-550)
Handset
For the latest product and technical support information,
visit the Oki Data website:
http://www.okidata.com
101
Download from Www.Somanuals.com. All Manuals Search And Download.
OKIFAX Authorized Dealer, authorized third-party service
provider, or Oki Data.
Warranty, Regulatory, and Safety
Information
To make request or claim for service under the parts-only portion
of this Limited Warranty the original purchaser must return the
Oki Data product, shipping prepaid, in the original shipping
container or equivalent, to Oki Data or an authorized OKIFAX
service center and assume the risk of loss or damage in transit. A
written receipt for the product, showing the date of purchase,
dealer’s name, and serial number of the OKIFAX facsimile
machine, must accompany any request or claim for work to be
performed under this Limited Warranty.
Limited Warranty: U.S. & Canada
Oki Data Americas, Inc. (Oki Data) warrants this OKIFAX to be
free from defect in material and workmanship and will remedy
any such defect according to the terms of this Limited Warranty.
This Limited Warranty extends to the original purchaser only and
does not extend to consumable items.
This Limited Warranty shall not apply if the product has been
damaged due to abuse, misuse, misapplication, accident, or as a
result of service or modification by any other than an authorized
OKIFAX service center.
Oki Data will, for a period of ninety (90) days from the date of
purchase, repair (or replace at its option) on site at the original
purchaser’s facility and without charge any defective
THERE ARE NO EXPRESS WARRANTIES OTHER THAN
THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE.
NO WARRANTIES WHETHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, SHALL EXTEND BEYOND
THE RESPECTIVE WARRANTY PERIOD DESCRIBED
ABOVE. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to
you.
component(s) of the OKIFAX, provided that this warranty
service is performed by an authorized OKIFAX service center or
authorized third-party service organization. From expiration of
the ninety (90) day parts and labor warranty until one (1) year
from the date of purchase (five [5] years in the case of the LED
imaging array), Oki Data will provide replacements for defective
components at no charge provided that this warranty service is
performed at an authorized OKIFAX service center or authorized
third-party service organization.
To make request or claim for service under the ninety (90) day
parts and labor coverage of this Limited Warranty, contact your
OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE
FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL
102
Download from Www.Somanuals.com. All Manuals Search And Download.
DAMAGES OR LOSS ARISING FROM THE USE OF THIS
PRODUCT. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above exclusion
may not apply to you.
In the U.S. and Canada, call 1-800-654-3282 (1-800-OKI-
DATA).
Oki Data Contact Locations: U.S. & Canada
Additional information on obtaining service under this Limited
Warranty is available by contacting the OKIFAX dealer from
whom the product was purchased, by contacting Oki Data
directly at 1-800-654-3282 [1-800-OKI-DATA] (U.S. and
Canada, English only) or at 1-856-222-5276 (Spanish only), or
by contacting one of the listed service locations.
United States
Oki Data Americas, Inc.
2020 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Phone: 1-800-654-3282
Fax: 1-856-222-5247
This Limited Warranty applies to all OKIFAX. However, the
procedure for obtaining service may vary outside the continental
United States. Contact your OKIFAX dealer for such warranty
service information.
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East, Unit 1
Mississauga, Ontario
Canada L4W 4M8
Phone: 1-800-654-3282
Fax: 1-905-238-4421
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Service and Support: U.S. & Canada
Oki Data is firmly committed to the satisfaction of our
customers. If you have a problem that your customer
documentation cannot solve, contact the listed sources for
service or support.
Sales and Service Dealers: U.S. & Canada
Consult the store location where you purchased your machine, or
contact Oki Data for the location of the nearest Authorized Oki
Data Service Dealer.
Oki Data Service Providers: U.S. & Canada
Prices and minimum charges may vary.
For the most comprehensive, up-to-date listing of Oki Data
authorized Service Centers in the United States and Canada:
Proof of purchase is required for warranty work. Be sure to retain
your purchase documents.
In the U.S. go to www.okidata.com and click Dealer Locator.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
• ·Consumer relations
Telephone Support
1-800-654-3282 (1-800-OKI-DATA)
Toll Free in the U.S. and Canada
Note: Customer Support Representatives are not trained to
provide assistance with the use of commercial software
packages. Please consult your software user’s manual for
times and availability of their support.
Automated Attendant
For quick answers to commonly-asked questions, the Automated
Attendant is available 24 hours a day, 7 days a week. The system
can provide immediate assistance with:
Material Safety Data Sheet
MSDS#58093701
• ·Basic operating procedures
• ·Sales and service referrals
• ·Parts and consumable referrals
• ·Product information
Product Identification and Use
OKIFAX 5680 Black Toner, P/N 52106701
Customer Support Professionals
For more information, contact Oki Data at 2000 Bishops Gate
Blvd., Mount Laurel, NJ, 08054-4620.
Customer Support Professionals are available 24 hours a day, 7
days a week. Please be sure that you are calling from a telephone
close to your machine so you can describe your problem
accurately.
Emergency Information: Call 1-800-654-3282; US & Canada
Only
Hazardous Ingredients
Our Customer Support Professionals are trained on all current
OKI products. They can answer your questions regarding:
Styrene-Butyl Acrylate Copolymer
(91% by weight)
• ·Locations of sales and service dealers
• ·Installation of your machine
CAS# 25767-47-9
• ·Usage/normal maintenance of your machine
• ·Error message interpretation/solutions
• ·Parts and supplies identification
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Carbon Black (5-7% by weight)
104
Download from Www.Somanuals.com. All Manuals Search And Download.
CAS# 1333-86-4
Specific Gravity (H2O=1): 1.15
OSHA TWA 3.5 mg/m3
Solubility in water: Negligible
ACGIH TLV 3.5 mg/m3
Solubility in solvents: Not available
Coefficient of water/oil Distribution: Not available
Appearance and odor: Black granules, no odor
Odor Threshold: Not available
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Fire and Explosion Hazard Data
Amorphous Fumed Silica
(less than 1% by weight)
Flammability: Not flammable under conditions of use.
CAS# 67762-90-7
Extinguishing Media: In case of fire, use extinguishing media
(water spray, CO2, foam, dry chemicals). When in a machine,
treat as an electrical fire.
OSHA PEL 15.0 mg/m3 for total dust
ACGIH TLV 10.0 mg/m3 for total dust
Flash Point (ºC): Not applicable
Note: This product is not regulated under Section 313 of SARA,
Title III.
3
Lower Explosive Limit: 60 g/m
Upper Explosive Limit: Not applicable
Physical Data
Auto-ignition Temperature: Not applicable
Hazardous Combustion Products: Not applicable
Physical State: Solid
Melting/Freezing Point: 230°F (110°C) / Not available
Boiling Point: Not applicable
Explosion Data
PH: Not available
Like most organic materials in powder form, it can form
explosive mixtures when dispersed in air.
Vapor Pressure: Not applicable
Vapor Density (Air=1): Not available
Evaporation Rate (Butyl Acetate=1): Not available
Sensitivity to Mechanical Impact: Not available
Sensitivity to Static Discharge: Not available
105
Download from Www.Somanuals.com. All Manuals Search And Download.
NTP: No components are listed
Reactivity Data
OSHA: No components are listed
Stability: Stable
Reproductive Toxicity: Not Available
Teratogenicity: Not Available
Conditions to Avoid: Not available
Polymerization: Will not occur
Mutagenicity: Ames Assay: Negative
Name of Toxicologically Synergistic products: Not Available
Hazardous Decomposition Products: Thermal decomposition
may result in release of oxides of carbon and nitrogen.
Incompatibility: Avoid exposure to strong oxidizers
Toxicological Properties
Preventive Measures
Routes of Entry: Inhalation, Ingestion, Eyes, Skin
Effects of Acute Exposure:
Personal Protective Equipment
Respiratory Protection: Not normally required. For large
spills, use dust respirator during cleanup.
LD50: Not Available
Protective Gloves and/or Eye Protection: Not normally
required. For large spills, use rubber gloves and safety goggles
during cleanup.
LC50: Not Available
Effects of Chronic Exposure: Not Available
Exposure Limits: See Hazardous Ingredients section
Irritancy: Not Available
Engineering Controls
Ventilation: Outside of normal ventilation, not normally
required.
Sensitization: Not Available
Carcinogenicity
Other Protective Equipment and/or Hygienic Practices:
IARC
None
Spill Cleanup
Carbon Black: Group 2B. “Possible Carcinogen”
Polypropylene: Group 3. Not Classifiable.
Amorphous Fumed Silica: Group 3. Not Classifiable.
Small Spills
1. Remove sources of ignition.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Clean up spill with a wet (cold water) cloth.
Large Spills
Toner inhaled.
Remove person to fresh air. Seek medical attention.
Toner gets in the eyes.
1. Remove sources of ignition.
2. Keep unnecessary and unprotected personnel away from
area.
Flush eyes with large quantities of cool water for 15 minutes,
keeping the eyelids open with fingers. If necessary, seek medical
attention.
3. Wear protective gear: respirator, rubber gloves, goggles.
4. Vacuum the spill, then wipe up remainder with a wet (cold
water) cloth.
Toner gets on the skin.
5. Place waste material in a closed container.
Waste Disposal
Wash toner off the skin with plenty of cool water and soap. If
necessary, seek medical attention.
• ·Prevent release of material into natural waters and sewers.
• ·Follow appropriate federal, state and local regulations.
Note: Small amounts of toner on skin or clothing can easily be
removed with soap and cold water. Hot water makes toner
harder to remove.
Precautions for Handling or Storage: Protect from the sun.
Store in a cool room, under 104oF (40oC)
Preparation Date of MSDS
Special Shipping Information: Non hazardous. Handle
container carefully to avoid shock. Do not drop. Keep dry.
Date: March 1, 2003
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
FAX: (856) 222-5320
http://www.okidata.com
my.okidata.com
Emergency First Aid Procedures
Toner swallowed (ingested).
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out mouth and
give one or two glasses of water or milk to drink.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation and Maintenance
Safety Information
• ·Use a dry cloth to clean the control panel and the main body
of the unit.
Installation Hints
• ·Aside from replacing the toner and image drum cartridge,
do not disassemble or attempt to service this unit yourself.
Refer to a qualified technician for service.
• ·Install your machine in a dust-free location away from direct
sunlight.
• ·Do not plug your machine into a power source shared by
equipment which produces electrical noise (i.e., air condi-
tioners, etc.).
• ·Disconnect the power cord before trying to remove any
objects that may have fallen into the machine.
• ·When relocating your machine, always disconnect the tele-
phone line before disconnecting the power cord, then recon-
nect the power cord first.
• ·Leave electronic adjustments to authorized service person-
nel.
• ·The LINE terminal connects your fax machine to a standard
telephone line. To avoid damage to your telephone system or
to the machine, do not plug your fax machine into anything
other than a standard RJ-11C jack.
• ·This unit is not intended to be used in parallel with any other
telephone devices.
• ·If anything happens that indicates that the machine is not
working properly or has been damaged, unplug it immedi-
ately and follow the instructions in “Service and Support” to
have your machine serviced.
• ·Your machine is intended to be grounded electrically and is
equipped with a three-wire grounded power cord. For your
safety, do not attempt to defeat your power cord’s grounding
plug.
• These are some of the things to look for:
• -The power cord or plug is frayed or damaged.
• ·The power outlet should be located near the equipment and
should be easily accessible.
• -Liquid has been spilled into the printer, or it has been
exposed to water.
• ·The TEL port on the back of the unit is only suitable for 2-
wire devices. Not all standard telephones will respond to
incoming ringing when connected to an extension socket.
• -The machine has been dropped, or the cabinet is damaged.
• -The machine does not function properly when you’re fol-
• ·This equipment may not necessarily provide for the effec-
tive hand-over of a call from a telephone connected to the
same line.
lowing the operating instructions.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Toner Cartridge & Image Drum Handling
Regulatory Information
• ·Leave unused toner cartridges and image drum units in their
packages until needed. When replacing a toner cartridge or
image unit, re-use the packaging to dispose of the old toner
cartridge or image drum unit. Be sure to dispose of it in an
environmentally sound manner.
®
Energy Star
As an Energy Star Partner, Oki Data has determined that this
product meets the Energy Star guidelines for energy efficiency.
• ·Do not expose these components to light for more than five
minutes. Never expose the green drum (inside the image
drum unit) to direct sunlight.
• ·Always hold the image drum unit by the ends—never by the
middle. Never touch the surface of the green drum inside the
image drum unit.
Year 2000 Compliance
• ·Exercise care when removing the toner cartridge. Do not let
it touch your clothing or porous materials. The toner powder
causes permanent stains.
This product is Year 2000 Compliant. It contains information
technology that accurately processes date and time data between
the years 1999 and 2000, and carries no issue for the September
9, 1999 (9999) programming concern. This product, when used
in combination with products purchased from other
• ·Small amounts of toner spilled on skin or clothing can be
readily removed with soap and cold water. Using heated
water will make removing the stain much more difficult.
manufacturers, whose products properly exchange data and time
information, will accurately process the date and time.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
telephone line may result in the devices not ringing in
response to an incoming call. In most but not all areas, the
sum of RENs connected to a line, as determined by the total
RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point (e.g., 03 is a REN of 0.3). For
earlier products, the REN is separately shown on the label.
Federal Communications Commission
(FCC)Administrative Council for Terminal Attach-
ment (ACTA) Requirements for End Users
This device has been approved for a registration number by the
Administrative Council for Terminal Attachment (ACTA), under
Part 68 and ACTA rules and regulations for direct connection to
the telephone lines. In order to comply with these rules, the
following instructions must be carefully read and applicable
portions followed completely.
5. 5If the equipment causes harm to the telephone network, the
telephone company will notify you in advance. But if
advance notice isn’t practical, the telephone company will
notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you
believe it is necessary.
1. This equipment complies with Part 68 of the FCC rules and
the requirements adopted by the ACTA. On the back of this
equipment is a label that contains, among other information,
a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone
company
6. The telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to
make the necessary modifications to maintain uninterrupted
service.
2. The following USOC jacks may be used with this
equipment: RJ11C.
3. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See
installation instructions for details.
7. If trouble is experienced with this equipment, please contact
the following for repair and/or warranty information:
Oki Data Americas, Inc.
2020 Bishops Gate Blvd
Mount Laurel, N.J. 08054
Telephone:(856) 235-2600 or
(800)-OKI-DATA (800-654-3282)
4. The REN is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a
110
Download from Www.Somanuals.com. All Manuals Search And Download.
If the trouble is causing harm to the telephone network, the tele-
phone company may request that you remove the equipment
from the network until the problem is resolved.
telephone number provided may not be a 900 number or any
other number for which charges exceed local or long distance
transmission charges.
To comply with this law, you must enter the following
information in your fax unit:
8. This equipment contains no user serviceable parts. Please
contact Oki Data for service.
9. This equipment cannot be used on public coin service
provided by the telephone company. Connection to Party
Line Service is subject to state tariffs. Contact your state
Public Utility Commission, Public Service Commission, or
Corporate Commission for information.
• Date and time: see the Installation section of this document
for instructions on doing this.
• Name and telephone number which identify the source of
your fax transmission: see the User’s Handbook f for instruc-
tions on doing this.
10. If your home has specially wired alarm equipment connected
to the telephone line, ensure the installation of this facsimile
machine does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult
your telephone company or a qualified installer.
FCC Radio Frequency Interference Statements
120-Volt Models
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
11. This equipment is hearing-aid compatible.
FCC Telephone Consumer Protection Act
The Federal Communications Commission Telephone Consumer
Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device to send any message via a
telephone fax machine unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the
first page of the transmission, the date and time it is sent and an
identification of the business or other entity, or other individual
sending the message, and the telephone number of the sending
machine or such business, other entity, or individual. The
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
111
Download from Www.Somanuals.com. All Manuals Search And Download.
It is the responsibility of the user to obtain the required shielded
cable in order to ensure compliance of this equipment with FCC
regulations.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
receiver.
• Plug the unit into an outlet on a circuit different from that to
which the receiver is connected.
Industry Canada (IC)
• Consult the dealer or an experienced radio television techni-
cian for help.
Requirements for End Users
“This product meets the applicable Industry Canada technical
specifications.”
A properly shielded interface cable must be used in order to
ensure compliance of this equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. In some
cases, the company’s inside wiring associated with a single line
individual service may be extended by means of a certified
connector assembly (telephone extension cord). The customer
should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.
230/240-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
112
Download from Www.Somanuals.com. All Manuals Search And Download.
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
European Union Council of the
European Communities
• Users should not attempt to make such connections them-
selves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
Statements for 230/240-Volt Models
Electromagnetic Conformance Statement
"The Ringer Equivalence Number is an indication of the
maximum number of devices allowed to be connected to a
telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement
that the sum of the RENs of all the devices does not exceed five."
This product complies with the requirements of the Council
Directive 89/336/EEC on the approximation of the laws of the
member states relating to electromagnetic compatibility.
Safety Conformance Statement
IC Radio Interference Statements
This product is in conformity with Directive 73/23/EEC on the
harmonization of the laws of Member States relating to electrical
equipment designed for use within certain voltage limits.
120-Volt Models
This OKI apparatus complies with Class B limits for radio
interference as specified in the Industry Canada Radio
Interference Regulations.
230/240-Volt Models
This OKI apparatus complies with the Class A limits for radio
interference as specified in the Industry Canada Radio
Interference Regulations.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600 FAX: (856) 222-5320
http://www.okidata.com my.okidata.com
Oki Data Americas, Inc.
2735 Matheson Blvd. East, Unit 1
Mississauga, Ontario, Canada L4W 4M8
Tel: (800) 654-3282 FAX: (905) 238-4427
Oki Data de Mexico, S.A. de C.V., Mariano Escobedo No. 748 -
8 Piso, Col Anzures, e. p. 11590, Mexico, DF
Tel: +52 55 5263-8780 FAX: +52 55 5263-8785
Oki Data do Brasil, Ltda.
Rua Alexandre Dumas, 2220 - 80 andar
Chacara Santo Antonio
04717-004 São Paulo, SP Brazil
Phone: (5511) 3444-3500 Fax: (5511) 3444-3501
Support Center: 0800-11-55-77
e-mail: [email protected]
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
Copies, Making .........................................................40
Current Settings, Viewing .........................................53
Answering Mode
Changing .............................................................25
Setting .................................................................23 D
Auto Dial Numbers ...................................................31
Dialing
Real-Time ...........................................................36
Redialing .............................................................36
Search Key ..........................................................36
Documents
B
Broadcast ..................................................................42
Loading ...............................................................34
Multiple ...............................................................34
Preparing .............................................................34
Size ......................................................................34
Dual Access ..............................................................51
C
Canceling Messages Stored In Memory ...................38
Chain Dialing ............................................................31
Clearing Document Jams ..........................................65
Clearing Printer Paper Jams ......................................66
Components ..............................................................7
E
Component Identification ...................................8
Control Panel & Indicators .................................10
Email
Programming Email Addresses ..........................92
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving ............................................................96
Sending ...............................................................94
NIC Initialize ......................................................91
NIC Options ........................................................84
NIC Settings ........................................................85
POP Interval ........................................................87
Program Group Email Addresses .......................93
Program One-Touch Email Addresses ...............92
Receiving Email ..................................................96
Sending Email .....................................................94
Using Email Key .................................................94
Using OT Key .....................................................95
Image Drum Part Number .........................................101
Image Drum Unit, Replace .......................................71
F
Fax Machine Identification
Call Back Number ..............................................25
Sender ID ............................................................25
Setting .................................................................25
TSI/CSI ...............................................................25
Faxing
Confidential Faxes ..............................................45
Creating Confidential Mailbox ...........................46
Multiple Locations ..............................................42
Sending Delayed Faxes .......................................44
Sending to Single Location .................................35
Forwarding Number, Setting ....................................27
L
Language, Setting .....................................................27
M
I
Memory Expansion Kit Part Number .......................101
I-Fax
Current Settings ..................................................83
Email Using Group Mail Setting ........................95
Network Settings .................................................88
Network Setup ....................................................83
O
One-Touch Dialing ...................................................12
One-Touch Keys .......................................................12
Download from Www.Somanuals.com. All Manuals Search And Download.
Options ......................................................................7
Into Memory .......................................................37
Manually .............................................................37
Redialing ...................................................................36
Rejecting Unsolicited Fax Messages ........................39
Relay Broadcasting ...................................................48
Replacing
Image Drum Unit ................................................71
Toner Cartridge ...................................................69
Report
P
Paper
Loading Paper .....................................................21
Types ...................................................................21
Part Numbers
Consumables .......................................................101
Options ................................................................101
PBX, Connecting ......................................................28
Polling (Sending Documents Requested by Another Fax)
...................................................................................49
Power Failures & Memory .......................................39
Print Memory Reception ...........................................38
Printing Reports ........................................................63
Problem Checklist .....................................................74
Programming
Active Memory Files ..........................................61
Activity ...............................................................60
Broadcast Confirmation ......................................60
Broadcast Entry Report .......................................62
Codes Used .........................................................64
Confidential Reception Report ...........................62
Configuration Report ..........................................61
Power Outage Report ..........................................63
Printing ................................................................63
Protocol Dump ....................................................62
Telephone Directory ...........................................61
Auto Dial .............................................................31
Groups .................................................................32
One-Touch Keys .................................................29
S
R
Safety Instructions ....................................................6
Setting Up .................................................................16
Receiving Faxes
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Ext. Telephone or Ans. Machine .....20
Connecting Power ...............................................20
Connecting Telephone Line ................................19
Installing Document Stacker ...............................16
Installing External Handset .................................19
Installing Toner Cartridge ...................................16
Settings
Current ................................................................53
User Functions ....................................................53
User Functions, Changing ...................................57
Shipping the Fax Machine ........................................73
Signal Tones .............................................................14
Specifications ............................................................100
Stopping Transmissions ............................................37
T
Time & Date, Setting ................................................23
Toner Cartridge Replacement ...................................69
Toner Part Number ...................................................101
Tones .........................................................................14
V
Voice Request ...........................................................41
Download from Www.Somanuals.com. All Manuals Search And Download.
|