Operating Instructions
Optima Series
G 1470
G 2470
To prevent accidents
and machine damage
read these instructions
before
UV
installation or use.
M.-Nr. 06 696 060
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Detergent settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Default setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Problems water intake/drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Connection to the water supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
When using your dishwasher, follow
basic precautions, including the
following:
Electrical Safety
Before installation, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
The manufacturer cannot be held
responsible for damage or injury
caused by improper use of this
appliance.
Do not use an extension cord to
connect this appliance to
electricity. Extension cords do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Be certain your appliance is
properly installed and grounded by
a qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack, or inadequacy, of an
effective grounding system.
Keep these operating instructions in
a safe place and pass them on to
any future user.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
, WARNING - Fire hazard
Do not cover or crush the plug of
The dishwasher must be installed
and connected in compliance with
the installation instructions.
the appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug. Installing the
dishwasher in a tight space may crimp
the power cord or put pressure on the
plug which could cause overheating.
Installation and repair work should
be performed by a Miele
authorized service technician. Work by
unqualified persons could be
This dishwasher should only be
installed under a continuous
dangerous and may void the warranty.
Do not install or use a damaged
counter top secured to adjacent
dishwasher. A damaged appliance cabinetry.
is dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.
Do not install this dishwasher
beneath a cooking surface, oven or
any appliance that radiates heat.
High temperatures from these units may
damage the dishwasher.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely
and kept out of the reach of children.
Danger of suffocation!
When installing the dishwasher
under a counter top and removing
This equipment is not designed for the toekick, a build-under toekick must
maritime use or for use in mobile
installations such as recreational
be installed. Use the respective
installation kit. Danger of injuries.
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Do not cut the intake hose or
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
Department with specific requirements.
Only connect the dishwasher to the
mains when all installation and
plumbing work is complete.
It is recommended that the
dishwasher only be connected to
the mains with the plug (no
hard-wiring). The outlet must be
accessible at all times after installation
to disconnect the dishwasher.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
Only use detergents and rinse aids
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
To reduce the risk of injury, do not
allow children to play in, on or near
the dishwasher.
Do not inhale or swallow
detergents. Dishwasher detergents
contain irritant and corrosive
Only use the dishwasher if all
panels are properly in place.
Do not tamper
with the controls.
ingredients. They can cause burning in
the mouth and throat if swallowed, or
inhibit breathing. Consult a doctor
immediately if detergent has been
swallowed or inhaled.
Do not damage, sit or stand on the
door or baskets of the dishwasher.
Close the door when not in use.
Do not drink water from the
dishwasher! Harmful residues
could be present.
Under certain conditions, hydrogen
gas may be produced in a hot
water system that has not been used
for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water
system has not been used for such a
Do not fill the rinse aid reservoir or
salt container with detergent. It will
destroy the rinse aid compartment and
period, turn on all hot water faucets and water softener.
let water flow from each for several
If the power cord is damaged it
minutes before using the dishwasher.
This will release any accumulated
hydrogen gas. Do not smoke or use an
open flame during this time.
must only be replaced by a Miele
Service technician with a genuine Miele
power cord.
Be sure that all items placed in the
dishwasher are "dishwasher safe".
For items not labeled, check the
manufacturer’s recommendations.
Disposal of an appliance
If the appliance is removed from its
installation site and will not be
used, remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
When loading tableware, place
sharp items away from the door to
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
SAVE THESE
INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
a Upper spray arm (not visible)
b Cutlery tray (depending on model)
c Upper basket
g Filter combination
h Data plate
i Optical interface
j Rinse aid reservoir
d Middle spray arm
e Air inlet for drying
k Dual compartment detergent
(depending on model)
dispenser
f Lower spray arm
l Salt container
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
a Time display
f Program selection
g Program button
h On button g / Indicator
i Off button o
b Delay Start button d with indicator
c Detergent button
d Check / Refill indicators
e Glasscare indicator
j Optical Interface
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
^ For lowest energy consumption and
the gentlest washing of china and
crystal, connect the dishwasher to a
cold water source.
^ For fastest possible wash times, yet
higher energy consumption, connect
the dishwasher to a hot water source.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Use the correct amount of detergent
and rinse aid.
^ When using powder or gel detergent,
reduce the amount to 2/3 of the
normal amount when washing a small
load.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ For small loads select "Short".
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
To close the door
^ Push the baskets in.
^ Lift the door and push until it clicks
into position.
^ Pull the handle to open the door.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will
continue.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Water softener
Checking the water hardness
Once the dishwasher has been
installed and connected, run the
"Rinse + Hold" program. After the
program has finished, the water
hardness measured by the sensor can
be displayed.
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
This value is displayed in °d and may
vary depending on the water quality.
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above 4°d
(4 gr/gal [US]), the water should be
softened. This takes place
^ Turn the dishwasher off with "o".
^ Press and hold the program and "g "
button simultaneously. Hold the
program button until the lower right
program indicator lights.
automatically in the unit’s integrated
water softener.
If it does not come on, start over.
^ Press the "Detergent" button twice.
The water softener is set automatically
to the local water hardness.
The water softener is designed for a
water hardness of up to 70 °d.
The "Gel" indicator flashes twice in
intervals. The measured water hardness
is shown in the time display in the
numbers following "p".
If the hardness of your local supply
is constantly lower than 4 °d , you do
not need to add water softener
salt. The salt indicator turns off
automatically.
^ Turn the dishwasher off with "o".
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Filling the salt container
,Inadvertently filling the salt
container with dishwashing
detergent will damage the water
softener.
,Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
^ Remove the lower basket and
unscrew the salt container lid.
^ Place the provided funnel over the
salt container. Carefully fill with salt.
The salt container holds approx.
4.5 lbs (2 kg) of salt. As it is filled,
water will run out.
When opening the salt container,
water will run out. Open the
container only to refill salt.
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first
time. Water does not have to be
added with subsequent refills.
^ If the dishwasher will not be used
immediately, run the "Short" program.
This will remove any traces of salt
from inside the wash cabinet.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Salt indicator
^ When the "Salt" indicator comes on,
refill the salt after the program is
finished.
After the container has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is started. The "Salt"
indicator will be lit during this process.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware. The rinse aid is
filled in the reservoir and the set
amount will be automatically dosed.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
When using "2 in 1" detergents, no
rinse aid is needed.
^ Pour liquid rinse aid into the reservoir
until it its visible on the surface of the
screen.
Adding rinse aid
The rinse aid reservoir holds approx.
3.7 oz (110 ml).
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
^ Press the button in the direction of
the arrow until the flap springs open.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid indicator
Adjusting the dosage
When the rinse aid indicator first comes The dosage selector is preset to 3. This
on, there will be enough rinse aid left
for 2 - 3 washes.
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 1 to 6.
– Use a higher setting if spots appear
on dry glassware.
– Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off "o".
^ Press and hold the program button
and at the same time turn the
dishwasher on with "g". Hold the
program button until the lower right
program indicator lights.
If it does not come on, start over.
^ Press the "Detergent" button 3 times.
The "Gel" indicator flashes 3 times.
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
If the "2 in 1" function is selected, the
rinse aid indicator will not light, see
"Additional functions - Detergent
settings".
The time display shows "p 3" flashing.
A rinse aid amount of 3 ml is selected
(factory setting).
The set value is shown in the time
display after "p".
^ Select the desired setting with the
program button. Every touch of the
button adjusts the level.
The dosage is saved.
^ Turn the dishwasher off "o".
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
Wax, grease and paint will cause
permanent discoloration and
damage to the dishwasher.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
^ Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
^ All items can be placed anywhere in
the baskets.
^ Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
^ Make sure that all items are securely
positioned.
^ Hollow items such as cups and
glasses should be placed upside
down in the baskets.
^ To ensure good water coverage,
tall, narrow and hollow items,
i.e. vases or champagne glasses,
should be placed in the center of the
basket rather than in the corners.
^ Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
– Cutlery with wooden handles
– Wooden cutting boards
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
– Glued items such as old knives with
handles glued together around the
shank of the blade
– Handmade craft items, antique,
metal trimmed or decorative
glassware
– If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
– Plastic items that are not heat
resistant
– Copper, brass, tin or aluminum
Silver and aluminum:
– Dishes with color painted over the
glaze. These dishes may fade over
time
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
– Cast iron pots and pans
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
* depending on model
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
– Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery tray
(depending on model)
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders
^ Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge
down and forks with the prongs
between the holders. Spoons should be
placed in the opposite direction with
the handles between the holders.
The upper spray arm must not be
blocked by tall cutlery items.
The cutlery tray insert is removable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery basket
Spoon inserts for the cutlery basket
(depending on model)
The supplied insert is designed to wash
heavily soiled spoons. The individual
slots allow the water to better reach the
surface of each spoon.
^ For best cleaning results, cutlery
should be placed in the basket with
the handles down. Knives and forks
should be loaded with the pointed
end down to prevent injuries.
^ Attach the insert when needed to the
cutlery basket.
^ Place small spoons in the individual
slots to either side of the cutlery
basket.
^ Insert the cutlery with the handles
down into the insert. Arrange the
cutlery evenly.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Coffee bar
(depending on model)
,Always use the dishwasher with
the upper and lower basket inserted.
Glasses can be leaned against the
coffee bar to allow a firm stand.
^ Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls and flat pans.
^ The bar can also be used to separate
two rows of glasses.
^ To stack wide items, flip the bar to the
right.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
Cup racks
^ Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Removable spike insert
Removing the insert a:
The spike insert can be removed to
create more space for larger items,
e.g. a saucepan.
^ To remove an insert, gently pull up on
the handle.
Inserting the insert b:
^ Slide the hitches of the insert under
the horizontal struts of the upper
basket.
^ Push down on the handle to snap the
insert into position.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the upper basket
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
The upper basket can be raised or
lowered to accommodate tall items.
For example: If the upper basket is in
its highest position a plate with a
diameter of 12 3/16" (31 cm) can be fit in
the lower basket.
The basket can also be angled to fit tall
items in both, the upper and lower
baskets. The angles should not be set
to opposite extremes. This will block the
middle spray arm. Take care when
sliding the basket in and out in this
position.
^ Slide out the upper basket.
^ Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^ Release the levers and the basket will
lock in place.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
^ For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower basket inserts
PlateGuard Plus with StemGuard
Bottle holder
The comfort insert is designed for cups,
glasses, plates, bowls and pots.
^ The insert sits comfortably in the left
side of the lower basket.
^ To insert tall items, raise the cup rest.
The bottle holder, e.g. for vases and
baby bottles, can be inserted into the
lower basket.
If placed anywhere else, water will not
reach all surfaces. The bottle will not be
properly cleaned.
^ Lean or hang stemmed glassware
such as wine or champagne glasses
in the cut outs of the cup rest.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower basket inserts
Foldable Spike insert
Removing an insert a:
^ To remove an insert, gently pull up on
the handle.
A highly flexible design holds tableware
securely.
^ Hook the foldable spike insert into the
back right corner of the lower basket.
Inserting an insert b:
^ Slide the hitches of the insert under
the vertical struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
Two rows of spikes can be folded
down, to create more room for larger
dishware, e.g. pots, pans and bowls.
^ Press down the yellow lever, a, to
fold down the spikes, b.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or Miele. Depending on the model some accessories come standard
with the machine.
Glassware insert GGO
To wash long stemmed glassware,
attaches to the upper basket
Cappuccinatore insert GCEO
To wash the parts of the Cappuccinatore
(milk froth mug supplied with the Miele
Coffee System), attaches to the upper
basket
Multi-function basket GMFO
Tall glassware insert GGU
To wash baby bottles, saucers and small
items, attaches to the upper basket
To wash a large number of tall glasses,
attaches to the lower basket
Large diameter plate insert
GTLU 35
To wash plates with a diameter up to 14"
(35 cm), attaches to the lower basket
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Detergent
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging. See "Settings - Detergent"
for more information on detergent
usage.
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
Keep children away from detergent.
Fill the detergent dispenser only
when you are ready to start the
dishwasher.
Detergent tabs are not recommended
for use with the program "Short". The
tabs may not dissolve completely.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Adding detergent
^ Add detergent to compartment II and
close the flap.
^ To open, press the latch on the
detergent dispenser. The flap will
spring open.
^ If a Pre-rinse is desired, and available
for your chosen program, add
1 teaspoon (5 ml) of detergent to
compartment I.
The flap is always open at the end of a
program.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. Compartment I holds a
maximum of 2 teaspoons (10 ml).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning on
Selecting and starting a
program
^ Open the water supply, if it is closed.
^ Open the door.
^ Choose your program according to
the type of load and soiling. See the
"Program Guide" for more
information.
^ Make sure the spray arms can rotate
freely.
^ Turn the dishwasher on "g".
^ Select the desired program with the
program button.
The "g" indicator and the indicator of the
last set program lights.
The program indicator of the selected
program lights. The time display shows
the duration of the selected program in
hours and minutes. If the "2 in 1" or
"Gel" option is selected, the respective
indicator illuminates. See "Detergent
settings" for more information.
^ Select an additional function if
desired, see "Additional functions" for
more information.
^ Close the door.
The program starts.
The optical indicator lights as a
confirmation for a started program.
Cancel a program only in the first
5 minutes. Otherwise important
program steps (e.g. the water
softening) may be interrupted.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program sequence
Pre-
Main Interim Final Drying
rinse
wash
rinse
rinse
1
x
2
x
1
2
For normally soiled pots and pans
with dried on food, also for heavily
soiled dishware, use 120% of normal
detergent dose
x
x
x
x
Pots & Pans
Normal
Run-time 125 min
For normally soiled dishware
Run-time 129 min
x
x
x
x
x
x
x
x
For temperature sensitive glassware
and lightly soiled dishware, use
50% of normal detergent amount,
includes sensor controlled Glasscare
Run-time 96 min
as
x
as
re-
quired
China &
Crystal
required
Extended wash time,
x
x
x
x
x
x
x
SaniWash
Short
for sanitizing normally soiled
dishware with dried on food
Run-time 115 min
"Quick program" for lightly soiled
dishware, e.g. party dishware or to
remove salt traces from the wash
cabinet after refilling salt, includes
sensor controlled Glasscare,
not suitable for detergent tabs
Run-time 30 min
x
To rinse dishes when a complete
program is not needed
x
Rinse & Hold
detergent is not recommended
Run-time 13 min
Usage:
Electric: 0.01 - 1.23 kWh
Water: 1.3 - 6.3 gal (5 - 24 l)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Time display
At the end of a program
Before the program starts, the time
display shows the running time of the
At the end of a program the optical
function light flashes slowly with the
selected program in hours and minutes. door closed.
During the running program the
The time display shows "0".
remaining time shown in the time
display.
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
After turning off the dishwasher open
the door slightly. The dishes will cool
much faster.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
^ Unload the dishwasher.
The optical function light goes out one
hour after the end of a program.
The time values in the program guide
correspond to the program running
times with standard loads and
temperatures.
^ Turn the dishwasher off "o".
The dishwasher continues to use
electricity until turned off with the
"o " button.
Each time a program is run, the
electronic adjusts the program running
time according to the intake water
temperature and the load size.
^ If the dishwasher is not used for a
longer period of time, e.g.
vacationing, turn off the water supply.
Glasscare indicator
The green Glasscare indicator lights
during the China & Crystal program.
This indicates that a program has been
selected which washes glasses
especially gently.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Interrupting a program
Changing a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
If the detergent flap is already open,
do not change the program.
If a program has already started and
you wish to change it:
,Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
^ Open the door.
^ Press the "o" button.
^ Press the "g" button.
^ Select the desired program with the
program button.
^ Close the door.
The optical control lights. The program
starts.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Detergent settings
The cleaning and drying
performance of these detergent
products varies.
To achieve the best results, set the
detergent used to your dishwasher. The
"Detergent" button allows you to select
the function "2 in 1" or "Gel". The
program cycle sequence will be
adjusted for the selected detergent.
Depending on the program, the
program running time may be
increased.
^ Open the door.
^ Turn the dishwasher on "g".
The indicator "g" lights.
^ Press the "Detergent" button until the
indicator of the desired detergent
"2 in 1" or "Gel" lights.
"2 in 1"
The function "2 in 1" adjusts the
program cycle to the use of "2 in 1"
detergent products (detergent with
rinse aid). The rinse aid dosage and
the rinse aid refill indicator will be
deactivated.
If none of the indicators are lit, the
dishwasher is set to powder detergent.
The set function will be active for all
programs until the setting is changed.
^ A program can be started or the
dishwasher can be turned off "o".
"Gel"
The function "Gel" adjusts the program
cycle to the use of liquid "Gel"
detergent products.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Delay start
Once the delay start time has elapsed,
the selected program starts. The
display shows the remaining time, the
indicator "d" goes out and the indicator
of the selected program lights.
The starting time of a program can be
delayed. The start time can be delayed
from 30 minutes to 24 hours.
With a delay start time between 30
minutes and 9 hours 30 minutes the
delay is set in 30 minute steps. For 10
hours or more it is set in one hour
steps.
Delay start display
Up to 59 minutes: e.g. 30 minutes = 30
Between 1 h and 9 h 30 min:
e.g. 5 hours = 5.00
When using the "Delay Start"
function, make sure that the
10 hours and over: e.g. 15 h = 15^
detergent compartment is dry before
adding detergent. Wipe dry with a
cloth if necessary. Otherwise the
detergent could stick together and
not completely rinse out.
Starting a program before the delay
start has elapsed
A program can be started before the
delay start time has elapsed.
Liquid detergent should not be used
when selecting "Delay Start", the
detergent could leak.
^ Open the door.
^ Press the o button.
^ Press the g button.
^ Open the door.
^ Select the desired program with the
program button.
^ Turn the dishwasher on "g".
The indicator "g" lights.
^ Close the door.
^ Select the desired program with the
program button.
The optical control lights. The program
begins.
^ Press the "d" button.
The last set delay start time will show in
the time display. The indicator "d"
lights.
^ Set the desired delay start time with
the "d" button.
^ Close the door.
The time will count down to the
program start: in 1-hour-steps over
10 hours, in 1-minute-steps under
10 hours.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Buzzer
Default setting
A signal sounds at the end of a
program and when a fault occurs.
All settings can be reset to the factory
default.
The buzzer at the end of a program
sounds five times in quick succession
for up to one hour.
^ Open the door.
^ Turn the dishwasher off "o".
^ Press the program button and at the
same time turn the dishwasher on "g ".
Hold the program button for at least
4 seconds until the lower right
The buzzer for a fault sounds in
intervals up to two minutes.
The buzzer is activated by default. It
can be turned off, so it does not sound
at the end of a program. The buzzer for
a fault cannot be turned off.
program indicator comes on.
If it does not come on, start over.
^ Press the tab button 12 times.
^ Open the door.
The "Gel" indicator flashes once long
and twice short in intervals.
^ Turn the dishwasher off with "o".
^ Press the program button and at the
same time turn the dishwasher on
with "g ".
The time display shows if a setting was
changed.
– "p 1": All settings are factory default.
^ Hold the program button for at least
4 seconds until the lower right
program indicator comes on.
– "p 0": At least one setting was
changed.
If it does not come on, start over.
^ To reset the dishwasher to the factory
default, press the program button.
^ Press the tab button four times.
The setting is saved.
The "Gel" indicator flashes four times in
intervals.
^ Turn the dishwasher off "o".
The time display shows if the program
end buzzer is turned on or off.
– "p 1": Buzzer is turned on
– "p 0": Buzzer is turned off
^ Press the program button to change
the setting.
The setting is saved.
^ Turn the dishwasher off with "o".
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue
Possible fault
Fix
The program does not
start.
The door is not
properly closed.
Close the door firmly.
The machine is not Insert the plug.
plugged in.
The fuse is defective Reset the circuit breaker.
or the breaker has
tripped.
Make sure it is a 15 A
breaker.
The dishwasher is
not turned on.
Press "g " and select a
program.
The dishwasher stops
during a program.
The fuse has
tripped.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The optical indicator is not The reflector was
Install the reflector properly,
see Installation sheet.
visible when a program
has started.
not properly
installed.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Fix
The optical indicator
flashes.
There may be a
technical fault.
Turn the dishwasher off "o".
After a few seconds:
The buzzer sounds.
All program indicators
are flashing fast when
the door is open.
The time display shows
FXX.
– Turn the dishwasher on.
– Select the desired program
with the program button.
– Close the door.
If the problem persists call
Technical Service.
The drain pump is
Fault F70: The
– Turn off the water supply.
running when the door waterproof system
is opened. has activated.
– Call Miele Technical Service.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems water intake/drain
Issue
Possible fault
Fix
The optical indicator
flashes.
The water supply – Open the water supply.
is shut off.
The buzzer sounds.
The "Intake/Drain"
indicator flashes when the
door is open.
The dishwasher stops.
The optical indicator
flashes.
The buzzer sounds.
The "Intake/Drain"
indicator flashes when the
door is open.
Before fixing the fault:
– Turn the dishwasher off "o".
Fault F12/F13:
Water intake fault
– Open the water supply.
– Clean the water intake filter,
see "User Maintenance
Instructions".
– The water pressure at the
water connection is lower
than 4.35 psi.
The time display shows
FXX.
Consult a plumber.
Fault F11: Water See "User Maintenance
drain fault.
Instructions".
There may be
water in the wash
cabinet.
– Clean the triple filter.
– Clean the drain pump and the
non-return valve.
– Remove any kinks in the drain
hose.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
General problems with the dishwasher
Issue
Possible fault
Fix
Detergent is left in the The dispenser was damp Dry the dispenser before
dispenser at the end when detergent was
adding detergent.
of a program.
added.
The detergent lid
cannot be closed
properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
This is not a fault! It is the The moisture will evaporate
interior walls are still normal operating mode of after a short time.
wet after a program
has finished.
the drying system.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Turn the dishwasher off
"o ".
The triple filter in the wash Clean the triple filter. See
cabinet is clogged.
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
"User Maintenance
Instructions".
The drain hose is kinked. Remove any kinks from the
drain hose.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Sounds
Issue
Possible fault
Fix
There is a knocking
noise in the wash
cabinet.
The spray arm is hitting an Interrupt the program,
item in the basket.
rearrange items blocking
the spray arms.
There is a rattling
noise in the wash
cabinet.
Items are not secure in the Interrupt the program and
wash cabinet. rearrange loose pieces.
There is a knocking
noise in the water
pipes.
This may be caused by the This has no effect on the
installation or the diameter dishwasher. If in doubt
of the pipe.
contact a plumber.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Poor cleaning results
Issue
Possible fault
Fix
The dishes are not
clean.
The dishes were not loaded See "Loading the
correctly.
dishwasher".
The program was not
powerful enough.
Select a more intensive
program, see "Program
Guide".
Not enough detergent was Use more detergent, see
dispensed. "Adding detergent".
The spray arms are blocked Turn the spray arm and
by items.
rearrange the dishes if
necessary.
The triple filter is clogged or Clean the filter and insert
not correctly inserted. The the filter correctly, see "User
spray arm jets may be
clogged.
Maintenance Instructions".
The drain pump or the
Clean the drain pump and
non-return valve is blocked. the non-return valve, see
Wash water will run back
into the wash cabinet.
"User Maintenance
Instructions.
Glasses and cutlery The rinse aid dosage is set Reduce the dosage, see
show streaks. There too high.
is a bluish sheen on
the surface of
"Before using for the first
time".
glasses and film that
can be wiped off.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Fix
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill
glasses and cutlery too low, or the rinse aid
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
are spotted.
reservoir is empty.
Dishes were taken out too
soon.
Leave dishes in longer, see
"Use".
A "2 in 1" product was used. Set the Detergent setting to
These products have a low "Powder" and add rinse aid.
drying effect.
The Detergent setting "2 in
Set the Detergent setting to
1" or "Gel" is turned on, but the detergent used, see
another product was used. "Detergent settings".
White residue is
visible on cutlery
and dishes.
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
Clouding occurs on
glassware and film
can be wiped off.
The salt container is empty. Refill the salt container, see
"Before using for the first
time".
The salt container lid was
not correctly screwed on.
Reseat it making sure it
screws back on correctly.
Unsuitable "2 in 1" or "Gel"
products were used.
Change detergent, use
normal tabs or normal
powder detergent.
The automatic water
softener unit is defective.
Contact Miele’s Technical
Service.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Detergent deposits.
Fix
Glasses are
Use a different detergent.
discolored and the
film cannot be wiped
off.
Glasses are dull and Glasses are not dishwasher There is no remedy. Only
discolored, film
safe.
wash dishwasher safe
cannot be wiped off.
glasses in the dishwasher.
Tea or lipstick stains The wash temperature of
have not been the selected program was
completely removed. too low.
The detergent has a low
Select a program with a
higher temperature.
Use a different detergent.
bleaching effect.
Plastics are
discolored.
Natural dyes e.g. from
vegetables may be the
cause. Not enough
Use more detergent, see
"Adding detergent".
Discoloration is permanent.
detergent was used to
break down natural dyes.
There are rust stains The affected items are not
There is no remedy. Only
wash dishwasher safe
cutlery in the dishwasher.
on cutlery.
corrosion resistant.
No program was run after
refilling salt. Salt residuals
got in the wash cycle.
Start the "Short" program
without a load after refilling
salt.
The salt container lid was
not screwed on properly.
Reseat and screw the lid on
firmly.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
^ Please quote the model type and
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
– Empty the dishwasher.
– Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and machine damage,
read these instructions
before installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Indicator reflector
Check and clean your dishwasher
regularly (approx. every 4-6
months). This will help avoid faults
and problems.
The reflector of the optical indicator is
located in the steam deflector beneath
the counter top.
To clean the reflector, remove it from the
plastic bracket.
,Abrasive cleaning agents, glass
cleaning agents, all-purpose
cleaners, thinner or ammonium
cleaners should not be used on the
dishwasher. They will damage the
surface.
^ Open the door and remove the
reflector from the bracket.
^ Clean the reflector and the plastic
bracket with a damp cloth.
^ Return the reflector to the bracket.
Wash cabinet
Control panel
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
^ Clean the control panel with a damp
cloth.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Cleaner" available from your Miele
dealer, Miele or online at
Exterior
^ Use a conditioner suitable for your
kitchen cabinetry.
^ Clean wood with a damp cloth and
wipe dry.
Door and the door seal
^ Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner or with
dishwashing detergent and warm
water.
^ Wipe the door seals regularly with a
damp cloth to remove food deposits.
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside
of the wash cabinet and are not
cleaned by water from the spray
arms.
^ To help prevent resoiling, a
conditioner for stainless steel can
also be used. Apply sparingly with
even pressure.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
,The machine must not be used
without all the filters in place!
^ Check and clean the filter system
every 4-6 months or whenever a
foreign object is trapped.
^ Turn the handle counterclockwise to
release the triple filter system.
The level of soiling and time it takes
before the filters need cleaning will vary
depending on your household.
^ Lift the filter combination out of the
machine. Remove any solid particles
and rinse under running water. Scrub
with a nylon brush if necessary.
^ Turn off the dishwasher before
cleaning.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the inside of the filter, the flap
must be opened.
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Push the clips together a and open
the flap b.
^ Lock the filter by turning the handle
clockwise.
^ Rinse under running water.
,The triple filter system must be
inserted and locked. Large particles
could get in the circulation system
and cause a blockage.
^ Close the flap so that the clip
engages.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Removing the spray arms
^ Remove the cutlery tray (if present).
^ Press the top spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Remove the lower basket.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check
that they rotate freely.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the water inlet filter
A filter is incorporated into the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
,The plastic housing of the water
connection contains electrical
wiring. Do not submerge the
housing in liquid.
Do not cut the intake hose or
submerge it in liquid.
^ Carefully remove the rubber seal.
Installing an in-line water filter
^ Remove the filter using needle nose
pliers and rinse it under running
water.
If your water contains a large number of
insoluble substances, a filter between
the water valve and the intake hose
connection is recommended. These
filters can be purchased from Miele.
^ Reinsert the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
Cleaning the filter
^ Turn off the dishwasher and pull the
plug.
^ Slowly turn on the water supply and
test for leaks.
^ Turn off the water supply.
^ Unscrew the intake hose.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher and pull the
plug.
^ Remove the triple filter (see "Triple
filter system").
^ Use a jug or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (glass or bone splinters).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully reinsert the non-return valve
and secure it with the locking clamp.
,Make sure the locking clamp
clicks into place!
^ Tilt the locking clamp to the side a.
^ Pull out the non-return valve b and
rinse it under running water.
^ Remove all foreign objects from the
non-return valve.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
For installation of the dishwasher
please refer to the Installation Sheet
supplied with these instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Help to protect the environment
Disposal of the packing
material
Disposal of an old machine
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
,Installation, repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held responsible for
unauthorized work.
,Improper connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
installed by a qualified electrician.
If there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
electrician or call Miele’s
Technical Service Department:
U 1-800-999-1360
V 1-800-565-6435
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician.
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Connection to the water supply
,Do not drink water from the
dishwasher!
– The dishwasher can heat its own
water to the temperature required by
the wash program. This allows for
connection of the machine to either a
hot or cold water source. For lowest
energy consumption connect the
dishwasher to a cold water source.
For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source. All programs use hot
water in the rinse cycles.
,Do not cut the intake hose. It
contains electrical wiring. If the hose
is cut, the dishwasher will not work.
There will be a waterleak and you
could be injured. If the hose is too
long, coil it neatly and place it
behind the machine.
– The inlet hose is approximately 5 ft.
(1.5m) long. A 5 ft. (1.5m) extension
hose is available from the Technical
Service Parts Department at the
phone number listed on the back of
this manual.
– The water inlet hose comes
equipped with a 3/4" female hose
thread connector. This can be
directly connected to a water supply
with 3/4" MHT (male hose thread
ends).
– Water pressure: Must be between
4.5 - 145 psi (0.3 - 10 bar).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
Venting the drainage system
– The machine comes equipped with a If the dishwasher drain hose is
built-in non-return valve on the
discharge side to prevent waste
water from flowing back into the
dishwasher.
connected to a floor drain or to a drain
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
– The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
^ Open the dishwasher door and
remove the lower basket.
– Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
(1 m).
^ Pull the lower spray arm firmly
upwards to remove.
– If the hose is to be directly fitted to
the drainage outlet on site, use the
supplied hose clip.
– The hose can be installed to the left
or right side.
– The existing drain pipe for the drain
hose is designed for various hose
diameters. The drain pipe must be
shortened if the drain pipe extends
too far into the drain hose. The drain
hose could get clogged.
^ Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
– The drain hose must not be
shortened.
– Make sure the hose is installed
without kinking, pressure or being
pulled.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Alterations reserved/4906
G 1470 Vi
G 2470 Vi
M.-Nr. 06 696 060 / 03
en - US
Download from Www.Somanuals.com. All Manuals Search And Download.
|