DIGITAL CAMERA
Reference Manual
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Read This First
all other instructions thoroughly and keep them where they will be read by all
who use the camera.
•
If you want to start using the camera right away, see “Preparing for
Other Information
•
Symbols and Conventions
Symbol
Description
This icon marks cautions and information that should be read
before using the camera.
B
This icon marks notes and information that should be read
before using the camera.
C
A
This icon marks other pages containing relevant information.
•
SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this
manual.
•
•
The setting at the time of purchase is referred to as the “default setting.”
The names of menu items displayed in the camera monitor, and the names
of buttons or messages displayed on a computer monitor appear in bold.
In this manual, images are sometimes omitted from monitor display samples
so that monitor indicators can be more clearly shown.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support
and education, continually updated information is available online at the following
websites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these websites to keep up-to-date with the latest product information, tips,
answers to frequently asked questions (FAQs), and general advice on digital imaging
and photography. Additional information may be available from the Nikon
representative in your area. Visit the website below for contact information.
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including battery
chargers, batteries, Charging AC Adapters, AC adapters and, USB cables) certified by
Nikon specifically for use with this Nikon digital camera are engineered and proven
to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA
AND MAY VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon
holographic seal could interfere with normal operation of the camera or result in the
batteries overheating, igniting, rupturing, or leaking.
Holographic seal: Identifies this
device as an authentic Nikon product.
For more information about Nikon brand accessories, contact a local authorized
Nikon dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking
the camera on a trip), take a test shot to ensure that the camera is functioning
normally. Nikon will not be held liable for damages or lost profits that may result from
product malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
About the Manuals
• No part of the manuals included with this product may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form, by any means, without Nikon’s prior written permission.
• Illustrations and monitor content shown in this manual may differ from the actual
product.
• Nikon reserves the right to change the specifications of the hardware and software
described in these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this
product.
• While every effort was made to ensure that the information in these manuals is
accurate and complete, we would appreciate it were you to bring any errors or
omissions to the attention of the Nikon representative in your area (address
provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or
reproduced by means of a scanner, digital camera or other device may be
punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local
government bonds, even if such copies or reproductions are stamped “Sample.” The
copying or reproduction of paper money, coins, or securities which are circulated in a
foreign country is prohibited. Unless the prior permission of the government was
obtained, the copying or reproduction of unused postage stamps or post cards
issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified
documents stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued
by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or
coupon tickets, except when a minimum of necessary copies are to be provided for
business use by a company. Also, do not copy or reproduce passports issued by the
government, licenses issued by public agencies and private groups, ID cards and
tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music,
paintings, woodcut prints, maps, drawings, movies, and photographs is governed by
national and international copyright laws. Do not use this product for the purpose of
making illegal copies or to infringe copyright laws.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory
cards or built-in camera memory does not completely erase the original image data.
Deleted files can sometimes be recovered from discarded storage devices using
commercially available software, potentially resulting in the malicious use of personal
image data. Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person,
erase all data using commercial deletion software, or set Record location data in
formatting the device and then completely refill it with images containing no private
information (for example, images of empty sky). Care should be taken to avoid injury
or damage to property when physically destroying data storage devices.
For the COOLPIX AW130, the log data saved on the memory card is handled in the
same way as other data. To erase the log data that is obtained but not stored on the
memory card, select Create log MEnd all logs MErase logs.
To delete the Wi-Fi settings, select Restore default settings in the Wi-Fi options
Conformity Marking
Follow the procedure below to display some of the conformity markings that the
camera complies with.
Press the dbutton Mz menu icon MConformity marking Mkbutton
Download from Www.Somanuals.com. All Manuals Search And Download.
v
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others,
read the following safety precautions in their entirety before using this
equipment. Keep these safety instructions where all those who use the product
will read them.
The consequences that could result from failure to observe the precautions
listed in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using
this Nikon product, to prevent possible injury.
WARNINGS
Turn off in the event of malfunction
Should you notice smoke or an unusual smell coming from the camera or
charging AC adapter, unplug the charging AC adapter and remove the battery
immediately, taking care to avoid burns. Continued operation could result in
injury. After removing or disconnecting the power source, take the equipment
to a Nikon-authorized service representative for inspection.
Do not disassemble
Touching the internal parts of the camera or charging AC adapter could result
in injury. Repairs should be performed only by qualified technicians. Should the
camera or charging AC adapter break open as the result of a fall or other
accident, take the product to a Nikon-authorized service representative for
inspection, after unplugging the product and/or removing the battery.
Do not use the camera or charging AC adapter in the presence of
flammable gas
Do not use electronic equipment in the presence of flammable gas, as this
could result in explosion or fire.
Remove the strap when using the camera underwater
Twisting the camera strap around the neck may cause suffocation.
Handle the camera strap with care
Never place the strap around the neck of an infant or child.
Keep out of reach of children
Particular care should be taken to prevent infants from putting the battery or
other small parts into their mouths.
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
Do not remain in contact with the camera, charging AC adapter, or
AC adapter for extended periods while the devices are on or in use
Parts of the devices become hot. Leaving the devices in direct contact with the
skin for extended periods may result in low-temperature burns.
Do not leave the product where it will be exposed to extremely
high temperatures, such as in an enclosed automobile or in direct
sunlight
Failure to observe this precaution could cause damage or fire.
Use the appropriate power supply (battery, charging AC adapter,
AC adapter, USB cable)
Using a power supply other than those provided or sold by Nikon could result
in damage or malfunction.
Observe caution when handling the battery
The battery may leak, overheat, or explode if improperly handled. Observe the
following precautions when handling the battery for use in this product:
•
Before replacing the battery, turn the product off. If you are using the
charging AC adapter/AC adapter, be sure it is unplugged.
Use only a Rechargeable Li-ion Battery EN-EL12 (included). Charge the
battery by using a camera that supports battery charging. To perform this
operation, use the Charging AC Adapter EH-71P/EH-71PCH (included) and
USB Cable UC-E21 (included). The Battery Charger MH-65 (available
separately) is also available to charge the battery without using a camera.
When inserting the battery, do not attempt to insert it upside down or
backwards.
•
•
•
Do not short or disassemble the battery or attempt to remove or break the
battery insulation or casing.
•
•
•
Do not expose the battery to flame or to excessive heat.
Do not immerse in or expose to water.
Put the battery in a plastic bag, etc. to insulate the terminal before
transporting it. Do not transport or store with metal objects such as
necklaces or hairpins.
•
•
•
The battery is prone to leakage when fully discharged. To avoid damage to
the product, be sure to remove the battery when no charge remains.
Discontinue use immediately should you notice any change in the battery,
such as discoloration or deformation.
If liquid from the damaged battery comes in contact with clothing or skin,
rinse immediately with plenty of water.
Observe the following precautions when handling the charging
AC adapter
•
Keep dry. Failure to observe this precaution could result in fire or electric
shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
•
•
•
Dust on or near the metal parts of the plug should be removed with a dry
cloth. Continued use could result in fire.
Do not handle the plug or go near the charging AC adapter during lightning
storms. Failure to observe this precaution could result in electric shock.
Do not damage, modify, forcibly tug or bend the USB cable, place it under
heavy objects, or expose it to heat or flames. Should the insulation be
damaged and the wires become exposed, take it to a Nikon-authorized
service representative for inspection. Failure to observe these precautions
could result in fire or electric shock.
•
•
Do not handle the plug or charging AC adapter with wet hands. Failure to
observe this precaution could result in electric shock.
Do not use with travel converters or adapters designed to convert from one
voltage to another or with DC-to-AC inverters. Failure to observe this
precaution could damage the product or cause overheating or fire.
Use appropriate cables
When connecting cables to the input and output jacks, use only the cables
provided or sold by Nikon for the purpose, to maintain compliance with
product regulations.
Handle moving parts with care
Be careful that your fingers or other objects are not pinched by the moving
parts.
Using the flash close to your subject's eyes could cause temporary
visual impairment
The flash should be no less than 1 m (3 ft 4 in.) from the subject.
Particular care should be observed when photographing infants.
Do not operate the flash with the flash window touching a person
or object
Failure to observe this precaution could result in burns or fire.
Follow the instructions of airline and hospital personnel
Do not touch the camera directly for a long time in low
temperatures of 0°C (32°F) or lower
If the skin contacts metal parts etc., it may result in injury to the skin. Wear
gloves etc.
Observe caution when using the movie light
Do not look directly into the movie light. This could damage the eyes or result
in visual impairment.
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
<Important> Shockproof, Waterproof,
Dustproof, Condensation
Make sure to read the following instructions as well as the instructions
•
Notes About Shockproof Performance
This camera has passed Nikon’s in-house test (drop test from a height of
210 cm (7 ft) on a 5 cm (2 in.) thick plywood panel) compliant with MIL-STD
810F Method 516.5-Shock*.
This test does not guarantee the waterproof performance of the camera or that
the camera will be free from damage or trouble under all conditions.
Changes in appearance, such as paint peeling off and deformation of the drop
shock portion are not subject to the Nikon’s in-house test.
*
U.S. Department of Defense test method standard.
This drop test drops 5 cameras in 26 directions (8 edges, 12 corners, and 6 faces)
from a height of 122 cm (48 in.) to make sure that one to five cameras pass the test
(if any defect is detected during the test, another five cameras are tested to make
sure that the test criteria are satisfied for one to five cameras).
Do not subject the camera to excessive shock, vibration or pressure by
dropping, hitting it, or placing a heavy object on it.
Failure to observe this precaution could deform the camera, damage the
airtight seals, or cause water to seep inside the camera, resulting in camera
malfunction.
•
•
Do not use the camera deeper than 30 m (100 ft) underwater.
Do not subject the camera to water pressure by exposing it to running
water.
•
Do not sit down with the camera in the pocket of your trousers.
Do not forcibly stuff the camera into a bag.
Notes About Waterproof and Dustproof
Performances
The camera is equivalent to JIS/IEC waterproof grade 8 (IPX8) and JIS/IEC
dustproof grade 6 (IP6X) and enables shooting images underwater at a depth
of 30 m (100 ft) for up to 60 minutes.*
This rating does not guarantee the waterproof performance of the camera or
that the camera will be free from damage or trouble under all conditions.
*
This rating indicates that the camera has been designed to withstand the specified
water pressure for the specified period of time when the camera is used according
to the methods defined by Nikon.
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
If the camera is subjected to excessive shock, vibration or pressure
caused by dropping it, hitting it, or placing a heavy object on it, the
waterproof performance is not guaranteed.
•
If the camera is exposed to shocks, it is recommended to consult your
retailer or Nikon-authorized service representative to confirm the waterproof
performance (charged service).
- Do not drop the camera, strike it against a hard object such as a rock, or
throw it against a water surface.
- Do not use the camera deeper than 30 m (100 ft) underwater.
- Do not subject the camera to water pressure by exposing it to rapids or
waterfalls.
- Your Nikon warrantee may not cover troubles caused by water seeping
inside the camera due to improper handling of the camera.
If water seeps inside the camera, immediately stop using the camera. Wipe
off moisture from the camera, and at once take the camera to your Nikon-
authorized service representative.
The waterproof performance of this camera is designed to work for fresh
water (swimming pools, rivers and lakes) and seawater only.
The inner portion of this camera is not waterproof. Water seeping inside the
camera could cause the components to rust, resulting in high repair costs or
irreparable damage.
•
•
•
•
•
Accessories are not waterproof.
If a liquid such as water droplets falls
on the outside of the camera or inside
of the battery-chamber/memory card
slot cover, immediately wipe it off with
a soft dry cloth. Do not insert a wet
memory card or battery in the camera.
If the battery-chamber/memory card
slot cover is opened or closed under
wet conditions near a waterfront or
underwater, this could cause water to
seep inside the camera or result in camera malfunction.
Do not open or close the cover with wet hands. This could cause water to
seep inside the camera or result in camera malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
x
•
If a foreign substance adheres to the
outside of the camera or inside of the
battery-chamber/memory card slot
cover (in locations such as yellow
waterproof packing, hinges, memory
card slot, or terminals), immediately
remove it with a blower. If a foreign
substance adheres to the waterproof
packing inside of the battery-chamber/
memory card slot cover, remove it with the included brush. Do not use the
included brush for anything other than cleaning the waterproof packing.
If a foreign substance such as suntan oil, sunscreen lotion, hot spring, bath
mix powder, detergent, soap, organic solvent, oil, or alcohol adheres to the
camera, immediately wipe it off. This could cause deterioration of the
camera exterior.
Do not leave the camera in low temperature conditions in cold climate
regions or in high-temperature conditions of 40°C (104°F) or more (in
particular, a place exposed to direct sunlight, inside the cabin of a car, on a
boat, on the beach, or near heating apparatus) for a long period of time. This
could cause deterioration of the waterproof performance.
•
•
Before Using the Camera Underwater
Remove the strap for land use before using the camera underwater.
1. Make sure that there are no foreign substances inside the battery-
chamber/memory card slot cover.
• Any foreign substances such as sand, dust or hair inside the battery-
chamber/memory card slot cover should be removed with a blower.
• Any liquid such as water droplets inside the battery-chamber/memory
card slot cover should be wiped off with a soft dry cloth.
2. Make sure that the waterproof packing of the battery-chamber/
memory card slot cover is not cracked or deformed.
• The waterproof performance of waterproof packing may start to
deteriorate after one year.
If the waterproof packing begins to deteriorate, consult your retailer or
Nikon-authorized service representative.
• Make sure that the waterproof packing is not detached from the camera.
3. Make sure that the battery-chamber/memory card slot cover is
firmly closed.
• Rotate the battery-chamber/memory card slot cover latch until it clicks
into place. Make sure that the thin cord of the camera strap does not get
caught.
• Make sure that the latch indicator indicates the “Close” status.
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
Notes About Using the Camera Underwater
Observe the following precautions to prevent water from seeping
inside the camera.
•
•
•
Do not dive into water deeper than 30 m (100 ft) with the camera.
Do not continuously use the camera underwater for 60 minutes or more.
Use the camera in the water temperature range from 0°C to 40°C (32°F to
104°F) when using it underwater.
•
•
Do not use the camera at hot springs.
Do not open or close the battery-chamber/memory card slot cover
underwater.
•
Do not subject the camera to shock when using it underwater.
Do not jump into water with the camera or subject it to high water pressure
conditions such as rapids or waterfalls.
•
This camera does not float in water. Make sure not to drop the camera
underwater.
Cleaning after Using the Camera Underwater
Within 60 minutes after using the camera underwater or at the beach, use a
soft cloth lightly dampened with fresh water to wipe off any sand, dust, or salt,
and dry thoroughly.
If you leave the camera in wet conditions where salt particles or other foreign
substances are adhered to it, this could cause damage, discoloration, corrosion,
a bad smell or deterioration of waterproof performance.
The cleaning procedure described below is recommended to ensure long-
term operation of the camera.
•
•
•
Before cleaning the camera, thoroughly remove water droplets, sand, salt
particles, or other foreign substances from your hands, body, and hair.
It is recommended to clean the camera indoors to avoid a place where it
could be exposed to water spray or sand.
Do not open the battery-chamber/memory card slot cover until all foreign
substances are washed off with water and all moisture is wiped off.
Download from Www.Somanuals.com. All Manuals Search And Download.
xii
1. Keep the battery-chamber/memory card slot cover closed and wash
off the camera with fresh water.
Immerse the camera in a shallow
basin filled with fresh water (such as
tap water and well-water that do
not contain salt) for 10 minutes.
• If the buttons or switches do not
operate properly, foreign
substances may have adhered.
Since this could cause a
malfunction, immerse the camera
in fresh water and shake it
sufficiently in the water to remove the any foreign substances from the
camera.
• When the camera is immersed in the water, a few air bubbles may come
out from the water drain holes of the camera such as openings in the
microphone or speakers. This is not a malfunction.
2. Wipe off water droplets with a soft cloth and dry the camera in the
well-ventilated and shady place.
• Place the camera on a dry cloth to dry it.
Water will flow out from openings in the microphone or speakers.
• Do not dry the camera with hot air from a hair dryer or clothes dryer.
• Do not use chemicals (such as benzine, thinner, alcohol, or cleanser), soap,
or neutral detergents.
If the waterproof packing or body of the camera becomes deformed, the
waterproof performance will deteriorate.
3. After making sure that there are no water droplets on the camera,
open the battery-chamber/memory card slot cover and gently wipe
off any water or sand remaining inside the camera with a dry soft
cloth.
• If you open the cover before the camera is thoroughly dried, water
droplets may fall on a memory card or battery.
The water droplets may also seep inside the battery-chamber/memory
card slot cover (in locations such as waterproof packing, hinges, memory
card slot, or terminals).
If that happens, wipe the water off with a dry soft cloth.
• If the cover is closed when the inside is wet, this could cause condensation
or malfunction.
• If the microphone or speaker openings are clogged with water droplets,
the sound may deteriorate or become distorted.
- Wipe the water off with a dry soft cloth.
- Do not puncture the microphone or speaker openings with a sharp
implement. If the inside of the camera is damaged, the waterproof
performance will deteriorate.
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
Notes About Operating Temperature and
Humidity and Condensation
The operation of this camera has been tested at temperatures from −10°C to
+40°C (14°F to 104°F).
When you use the camera in cold climate regions or at high altitudes, observe
the following precautions.
•
•
•
The performance of the batteries (number of images shot and shooting
time) will drop temporarily. Keep the camera and batteries warm inside a
cold-resistant container or under your clothing before use.
If the camera is in a very cold state, the performance may drop temporarily,
for example, the monitor may be darker than normal immediately after the
camera is turned on or residual images may be produced.
When snow or water droplets adhere to the exterior of the camera,
immediately wipe them off.
- If the buttons or switches are frozen, they may not operate smoothly.
- If the microphone or speaker openings are clogged with water droplets,
the sound may deteriorate or become distorted.
Operating environmental conditions such as
temperature and humidity may cause fogging
(condensation) on the inside of the monitor or lens.
This is not the camera malfunction or defect.
Environmental conditions that are likely to
cause condensation inside of the camera
Fogging (condensation) may occur on the inside of the monitor or lens in the
following environmental conditions where there are sharp temperature changes or
high humidity.
•
•
•
The camera is suddenly immersed in low temperature water after being in a
high temperature place on land, such as on the beach or in direct sunlight.
The camera is brought to a warm place such as inside a building from the
cold climate outside.
The battery-chamber/memory card slot cover is opened or closed in a high-
humidity environment.
Clearing the fogging
•
Open the battery-chamber/memory card slot cover after turning off the
camera in a place where the ambient temperature is stable (avoid any place
that has high-temperature/high-humidity, sand or dust).
To clear the fogging, remove the battery and memory card, and leave the
camera with the battery-chamber/memory card slot cover open to allow
the camera to adjust to the ambient temperature.
•
If the fogging does not clear, consult your retailer or Nikon-authorized
service representative.
Download from Www.Somanuals.com. All Manuals Search And Download.
xiv
<Important> Notes About Location Data
Functions (GPS/GLONASS, Electronic
Compass)
Map/location name data of this camera
Before using the location data functions, make sure to read “USER LICENSE
to the terms.
•
The maps and location name information (Points of Interest: POI) are as of
April 2014.
The maps and location name information will not be updated.
The details of geological formations are displayed simplistically according to
the scale of a map. The scale of a map and level of detail of the location data
vary depending on country and region.
•
If the latitude becomes higher, the horizontal and vertical scales displayed
on the monitor vary, therefore displayed geological formations differ from
the actual formations. Use the maps and location name information only as
a guide.
•
The detailed map data and location name information (Points of Interest:
POI) of the People’s Republic of China (“China”) and the Republic of Korea
are not provided for the COOLPIX AW130.
Notes about record location data functions and log recording
•
When Record location data in Location data options in the location
data options menu is set to On or while recording logs, record location data
functions and log recording will continue to operate even after the camera
•
An individual may be identified from still images or movies that have been
recorded with location data. Observe caution when you transfer still images
or movies recorded with location data, or log files to a third party or upload
them to a network such as the Internet where the public can view them.
Download from Www.Somanuals.com. All Manuals Search And Download.
xv
Notes about measurement functions
The COOLPIX AW130 is a camera. Do not use this camera as a navigation device
or measuring instrument.
•
Use information (such as direction, altitude and water depth) measured by
the camera as a guideline only. Do not use this information for navigation of
an airplane, car, and person or land survey applications.
When you use the camera for mountain climbing, trekking, or underwater,
make sure to take a map, navigation device, or measuring instrument
separately.
•
Using the camera overseas
•
Before taking the camera with location data functions overseas for travel,
consult your travel agency or embassy of the country you are visiting to
confirm whether there is any restriction on use.
For example, you cannot record location data logs without permission from
the government in China.
Set Record location data to Off.
The location data may not function properly in China and on the borders
between China and neighboring countries (as of December 2014).
•
Download from Www.Somanuals.com. All Manuals Search And Download.
xvi
Notices
Notices for Customers in the U.S.A.
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter of
the proper configuration for the power outlet if needed.
The power supply unit is intended to be correctly orientated in a vertical or
floor mount position.
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC
rules. These limits are designed
to provide reasonable
protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
CAUTIONS
Modifications
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by Nikon Corporation may
void the user’s authority to operate the equipment.
Interface Cables
Use the interface cables sold or provided by Nikon for your equipment. Using
other interface cables may exceed the limits of Class B Part 15 of the FCC rules.
Download from Www.Somanuals.com. All Manuals Search And Download.
xvii
Notice for Customers in the State of California
WARNING
Handling the cord on this product will expose you to lead, a chemical known to
the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
Tel: 631-547-4200
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Notices for Customers in Europe
CAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This symbol indicates that electrical and electronic equipment is to
be collected separately.
The following apply only to users in European countries:
•
•
•
This product is designated for separate collection at an
appropriate collection point. Do not dispose of as household
waste.
Separate collection and recycling helps conserve natural resources and
prevent negative consequences for human health and the environment
that might result from incorrect disposal.
For more information, contact the retailer or the local authorities in charge
of waste management.
This symbol on the battery indicates that the battery is to be
collected separately.
The following apply only to users in European countries:
•
All batteries, whether marked with this symbol or not, are
designated for separate collection at an appropriate collection
point. Do not dispose of as household waste.
•
For more information, contact the retailer or the local authorities in charge
of waste management.
Download from Www.Somanuals.com. All Manuals Search And Download.
xviii
Wi-Fi (Wireless LAN Network)
This product is controlled by the United States Export Administration
Regulations, and you are required to obtain permission from the United States
government if you export or re-export this product to any country to which the
United States embargoes goods. The following countries were subject to
embargo: Cuba, Iran, North Korea, Sudan, and Syria. Since the target countries
are subject to change, please contact the United States Department of
Commerce for the latest information.
Restrictions on Wireless Devices
The wireless transceiver included in this product conforms to wireless
regulations in the country of sale and is not for use in other countries (products
purchased in the EU or EFTA can be used anywhere within the EU and EFTA).
Nikon does not accept liability for use in other countries. Users who are unsure
as to the original country of sale should consult with their local Nikon service
center or Nikon-authorized service representative. This restriction applies to
wireless operation only and not to any other use of the product.
Notice for Customers in the U.S.A. and Canada
Federal Communications Commission (FCC) and Industry of Canada
(IC)
Declaration of Conformity
This device complies with Part 15 of FCC Rules and Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of this
device.
FCC/IC RF Exposure Statement
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power wireless
devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure of low-level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low-level RF
exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have not been
confirmed by additional research.
Download from Www.Somanuals.com. All Manuals Search And Download.
xix
COOLPIX AW130, which is equipped with a DW092 (FCC ID:EW4DW092 / IC
ID:4634A-3149EC) Wireless LAN Module, has been tested and found to comply
with FCC/IC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C
to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Please refer
to the SAR test report that was uploaded to FCC website.
Declaration of Conformity (Europe)
Hereby, Nikon Corporation, declares that COOLPIX AW130 is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC. The declaration of conformity may be consulted at
http://imaging.nikon.com/support/pdf/DoC_AW130.pdf.
Notice for Customers in Jamaica
This product contains a Type Approved Module by Jamaica: “SMA – DW092”
Download from Www.Somanuals.com. All Manuals Search And Download.
xx
Precautions when Using Radio Transmissions
Always keep in mind that radio transmission or reception of data is subject to
interception by third parties. Note that Nikon is not responsible for data or
information leaks that may occur during data transfer.
Personal Information Management and Disclaimer
•
User information registered and configured on the product, including
wireless LAN connection settings and other personal information, is
susceptible to alteration and loss resulting from operational error, static
electricity, accident, malfunction, repair or other handling. Always keep
separate copies of important information. Nikon is not responsible for any
direct or indirect damages or lost profits resulting from alteration or loss of
content that is not attributable to Nikon.
•
Before discarding this product or transferring it to another owner, perform
and configured with the product, including wireless LAN connection
settings and other personal information.
Download from Www.Somanuals.com. All Manuals Search And Download.
xxi
Table of Contents
Introduction ................................................................................................................. i
Information and Precautions............................................................................................................... iii
For Your Safety ......................................................................................................................... vi
Notes About Using the Camera Underwater .......................................................................... xii
Cleaning after Using the Camera Underwater ....................................................................... xii
<Important> Notes About Location Data Functions (GPS/GLONASS, Electronic
Compass) ................................................................................................................................... xv
Notices...................................................................................................................................... xvii
The Camera Body...................................................................................................................... 1
The Monitor ................................................................................................................................ 3
Insert the Battery and Memory Card ................................................................................. 6
Removing the Battery or Memory Card......................................................................................... 7
Charge the Battery ................................................................................................................... 8
Using the Zoom......................................................................................................................................... 14
Download from Www.Somanuals.com. All Manuals Search And Download.
xxii
Recording Movies................................................................................................................... 19
Using Action Menu.................................................................................................................................. 20
x (Scene Auto Selector) Mode......................................................................................... 21
Tips and Notes............................................................................................................................................ 24
Playback with Easy Panorama........................................................................................................... 32
A (Auto) Mode ...................................................................................................................... 42
Using the Creative Slider...................................................................................................................... 43
Flash Mode................................................................................................................................ 44
Using Face Detection............................................................................................................................. 51
Using Target Finding AF....................................................................................................................... 53
Subjects Not Suitable for Autofocus............................................................................................. 54
Thumbnail Playback/Calendar Display........................................................................... 60
Deleting Images in a Sequence....................................................................................................... 63
Download from Www.Somanuals.com. All Manuals Search And Download.
xxiii
Before Editing Images............................................................................................................................ 64
Data Imprint: Imprinting Information Such as Altitude and Direction Measured
by the Electronic Compass on Images ....................................................................................... 68
The Shooting Menu (for A (Auto) Mode).................................................................... 80
Continuous Shooting............................................................................................................................. 84
ISO Sensitivity.............................................................................................................................................. 87
The Playback Menu................................................................................................................ 94
Mark for Wi-Fi Upload ........................................................................................................................... 94
Rotate Image .............................................................................................................................................. 96
Sequence Display Options.................................................................................................................. 98
The Movie Menu .................................................................................................................. 100
Download from Www.Somanuals.com. All Manuals Search And Download.
xxiv
Movie VR...................................................................................................................................................... 106
Wind Noise Reduction........................................................................................................................ 107
The Wi-Fi Options Menu.................................................................................................... 108
The Location Data Options Menu.................................................................................. 110
Points of Interest (POI) (Recording and Displaying Location Name Information)
........................................................................................................................................................................... 113
Create Log.................................................................................................................................................. 114
View Log...................................................................................................................................................... 115
Set Clock from Satellite ..................................................................................................................... 115
Electronic Compass.............................................................................................................................. 116
The Setup Menu................................................................................................................... 119
Monitor Settings..................................................................................................................................... 121
Date Stamp................................................................................................................................................ 123
AF Assist....................................................................................................................................................... 125
Playback Action Control ................................................................................................................... 127
Firmware Version .................................................................................................................................. 131
Recording Location Data to Images.............................................................................. 133
Download from Www.Somanuals.com. All Manuals Search And Download.
xxv
Using Altimeter and Depth Gauge................................................................................ 140
Recording Movement Data Logs ................................................................................... 141
Displaying the Recorded Location Data on a Map........................................................... 144
Installing the Software on the Smart Device ............................................................. 146
Connecting the Smart Device to the Camera............................................................ 147
Preselecting Images in the Camera That You Want to Transfer to
a Smart Device...................................................................................................................... 149
Connecting the Camera to a TV (Playback on a TV) ................................................ 152
Connecting the Camera to a Printer (Direct Print)................................................... 153
Printing Images One at a Time...................................................................................................... 154
Printing Multiple Images................................................................................................................... 155
Technical Notes..................................................................................................... 159
Caring for the Product ....................................................................................................... 160
Cleaning and Storage......................................................................................................... 164
Storage ......................................................................................................................................................... 164
Error Messages...................................................................................................................... 165
Troubleshooting .................................................................................................................. 170
File Names .............................................................................................................................. 180
Optional Accessories .......................................................................................................... 182
Download from Www.Somanuals.com. All Manuals Search And Download.
xxvi
Specifications ........................................................................................................................ 192
Download from Www.Somanuals.com. All Manuals Search And Download.
xxvii
Download from Www.Somanuals.com. All Manuals Search And Download.
xxviii
Parts of the Camera
The Camera Body
1
2
3
4 5
6
7
15
14
13
12
11 10
9
8
Positioning antenna ...................... 133
1
2
3
4
5
9
Battery-chamber/memory card
10
Battery-chamber/memory card
slot cover latch release.......................6
11
Micro-USB connector.................... 150
12
13
14
AF-assist illuminator
Movie light........................................... 106
6
Lens
HDMI micro connector
7
8
15
Microphone (stereo)................. 38, 71
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1
2
3
4
5 6
7
8
16 15 14 13
12 11 10 9
OLED monitor (monitor)*.................3
1
2
8
9
10
A (shooting mode) button
11
3
Tripod socket
12
13
14
15
16
Speaker
Charge lamp.............................................8
4
5
b(emovie-record) button
6
7
*
Also referred to as the “monitor” in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
The Monitor
The information that is displayed in the monitor during shooting and playback
changes depending on the camera’s settings and state of use.
By default, information is displayed when the camera is turned on and when
you operate the camera, and turns off after a few seconds (when Photo info is
Shooting Mode
6
2
3
5
AF
4
7
8
1
23
22
40
30
20
10
0
21
9
15m
-10
1010hPa
20
19
10
29
m
0s
11
12
999
18
17 16
13
14
15
Shooting mode
Compass display (direction
1
13
14
15
2
3
4
5
Log display (altitude/water depth)
.................................................................... 141
Altitude/water depth.................... 140
16
17
Movie options (normal speed
movies) .................................................. 100
6
Wi-Fi communication indicator
.................................................................... 147
18
7
8
9
Save location..................................... 138
Location data reception.............. 132
19
20
21
22
Vibration reduction icon
10
Underwater flash ............................. 126
Location name information (POI
information)........................................ 135
11
12
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3
49
50
51
48
47
52
53 54 55 56
HDR
46
24
25
26
27
10
44 45
43
40
42
38 39 41
28
+1.0
29
m
0s
29
400
1/250
F2.8
999
37
36 35
34
999 9999
30
33 32 31
Focus area (subject tracking)
............................................................... 89, 90
Travel destination icon ................ 119
Soft .............................................................. 34
White balance mode........................ 82
Skin softening....................................... 34
Hue.............................................................. 43
Special effects....................................... 38
Time-lapse movie............................... 28
Backlighting (HDR) ............................ 26
Smile timer ............................................. 35
Pet portrait auto release................. 27
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
24
Focus area (face detection,
25
26
27
28
29
30
Focus area (manual or center)
Focus area (target finding AF)
Exposure compensation value
Remaining movie recording time
Number of exposures remaining
(still images)........................................... 11
31
32
33
34
35
Shooting still images (while
recording movies).............................. 74
Charging AC adapter connection
indicator
56
36
Date stamp.......................................... 123
“Date not set” indicator ............... 171
37
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Playback Mode
12 345678
9
999/999
999
/
999
10
11
9999
/
9999
29
29
m
m
00s
00s
29
28
27
25
24
12
13
14
15m
1010hPa
26
9999. JPG
15 11 2015 15:30
/
/
15
21 20
19 18
16
17
23
22
Quick effects guide
1
2
16
17
18
Sequence display (when
Individual pictures is selected)
3
Easy panorama playback guide
Sequence playback guide
Movie playback guide
19
Quick retouch icon........................... 65
Internal memory indicator
4
5
6
7
8
9
Time of recording
Date of recording
20
21
Charging AC adapter connection
indicator
22
Battery level indicator...................... 11
23
24
Current image number/
total number of images
10
Recorded location data indicator
.................................................................... 135
25
Movie length or elapsed playback
time
11
Altitude/water depth.................... 140
26
27
Movie options.................................... 100
12
13
14
15
Compass display (compass)
28
Location name information (POI
information)........................................ 113
29
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Preparing for Shooting
Insert the Battery and Memory Card
Battery latch Memory card slot
•
•
Press the battery-chamber/memory card slot cover latch release (1) and
rotate the battery-chamber/memory card slot cover latch (2) to open the
cover (3).
With the battery’s positive and negative terminals oriented correctly, move
the orange battery latch (4), and fully insert the battery (5).
Slide the memory card in until it clicks into place (6).
Be careful not to insert the battery or memory card upside-down or
backward, as this could cause a malfunction.
•
•
•
Close the battery-chamber/memory card slot cover (7) and, while pressing
it firmly against the camera so that the red portion on the side of the cover is
hidden, rotate the battery-chamber/memory card slot cover latch until it
clicks into place (8).
Make sure that the cover is securely locked.
B Formatting a Memory Card
The first time you insert a memory card that has been used in another device into
this camera, make sure to format it with this camera. Insert the memory card into the
B Notes About Closing the Cover without Getting the Camera Strap
or Cord Caught
If the camera strap’s cord gets caught in the battery-chamber/memory card slot
cover when it is closed, the cover could be damaged. Before closing the battery-
chamber/memory card slot cover, make sure that the strap or cord does not get
caught in it.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
B Opening/Closing the Battery-Chamber/Memory Card Slot Cover
Do not open and close the battery-chamber/memory card slot cover in a sandy or
dusty environment or with wet hands. If the cover is closed without removing
foreign particles, water may seep inside the camera or the camera may become
damaged.
• If foreign particles get inside the cover or camera, immediately remove them with a
blower or brush.
• If liquid such as water gets inside the cover or camera, immediately wipe it off with
a soft and dry cloth.
Removing the Battery or Memory Card
Turn the camera off and make sure that the power-on lamp and monitor have
turned off, and then open the battery-chamber/memory card slot cover.
•
•
Move the battery latch to eject the battery.
Gently push the memory card into the camera to partially eject the memory
card.
•
Be careful when handling the camera, battery, and memory card
immediately after using the camera, as they may become hot .
Memory Cards and Internal Memory
Camera data, including images and movies, can be saved either on a memory
card or in the camera’s internal memory. To use the camera’s internal memory,
remove the memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Charge the Battery
1
With the battery installed, connect the camera to an
electrical outlet.
Charge lamp
Charging AC Adapter
Electrical outlet
USB cable (included)
If a plug adapter* is included with your camera, securely connect it to the
Charging AC Adapter. Once the two are connected, attempting to forcibly
remove the plug adapter could damage the product.
*
The shape of the plug adapter varies according to the country or region in
which the camera was purchased. This step can be omitted if the plug
adapter comes permanently bonded to the Charging AC Adapter.
•
•
The charge lamp slowly flashes green to indicate that the battery is charging.
When charging is complete, the charge lamp turns off. It takes about 2 hours
and 20 minutes to charge a fully exhausted battery.
•
The battery cannot be charged when the charge lamp quickly flashes green,
possibly due to one of the reasons described below.
-
-
-
The ambient temperature is not suited to charging.
The USB cable or Charging AC Adapter is not properly connected.
The battery is damaged.
2
Disconnect the Charging AC Adapter from the electrical
outlet and then disconnect the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
B Notes About the USB Cable
• Do not use a USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
• Make sure that the plugs are properly oriented. Do not insert or remove the plugs
at an angle when connecting or disconnecting them.
B Notes About Charging the Battery
• The camera can be operated while the battery is charging, but the charging time
increases.
• If the battery level is extremely low, you may not be able to operate the camera
while the battery is charging.
• Do not, under any circumstances, use another make or model of AC adapter other
than Charging AC Adapter EH-71P/EH-71PCH, and do not use a commercially
available USB-AC adapter or a battery charger for a mobile phone. Failure to
observe this precaution could result in overheating or in damage to the camera.
C Charging Using a Computer or Battery Charger
• You can also charge the battery by connecting the camera to a computer.
• You can use the Battery Charger MH-65 (available separately) to charge the battery
without using the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Turn the Camera On and Set the Display
Language, Date, and Time
When the camera is turned on for the first time, the language-selection screen
and the date and time setting screen for the camera clock are displayed.
1
Press the power switch to turn on
the camera.
•
The monitor turns on.
•
To turn the camera off, press the power
switch again.
•
Note that the power switch is enabled a
few seconds after the battery is inserted. Wait a few seconds before pressing
the power switch.
Language
2
Use the multi selector
HIto select the
desired language and
press the kbutton.
Cancel
3
4
Select Yes and press the kbutton.
Select your home
time zone and press
the kbutton.
•
Press Hto display W
above the map and enable
daylight saving time. Press
Ito disable it.
Back
5
Use HIto select the date format and press the kbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Date and time
6
Set the date and time, and press
the kbutton.
D
M
Y
h
m
•
•
Use JKto select a field and then use HI
to set the date and time.
Select the minute field and press the k
button to confirm the setting.
0 1 0 1 2 0 1 5 0 0 0 0
Edit
7
8
When the confirmation dialog is displayed, use HIto
select Yes and press the kbutton.
Number of exposures
remaining
Read the message about the
waterproof function, and press K.
•
•
There are seven message screens.
Press the kbutton after confirming the
last message.
The shooting screen is displayed, and you
can take pictures in scene auto selector
mode.
40
30
20
10
0
•
•
15m
-10
1010hPa
25
m
0s
Battery level indicator
880
b: The battery level is high.
B: The battery level is low.
Number of exposures remaining
Battery level indicator
•
C is displayed when no memory card is inserted in the camera, and images
are saved in the internal memory.
C Changing the Language or the Date and Time Setting
• You can change these settings using the Language and Time zone and date
• You can enable or disable daylight saving time in the z setup menu by selecting
Time zone and date followed by Time zone. Press the multi selector Kand then
Hto enable daylight saving time and move the clock forward one hour, or Ito
disable daylight saving time and move the clock back one hour.
C The Clock Battery
• The camera’s clock is powered by a built-in backup battery.
The backup battery charges when the main battery is inserted into the camera or
when the camera is connected to an optional AC adapter, and it can run the clock
for several days after about 10 hours of charging.
• If the camera’s backup battery becomes exhausted, the date and time setting
screen is displayed when the camera is turned on. Set the date and time again
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Basic Shooting and Playback
Operations
Shooting with Scene Auto Selector Mode
1
Hold the camera steady.
•
Keep fingers and other objects away from
the lens, flash, AF assist-illuminator,
microphone, and speaker.
•
When taking pictures in portrait (“tall”)
orientation, turn the camera so that the
flash is above the lens.
2
Frame the picture.
•
Move the zoom control to change the
zoom lens position.
Zoom in
Zoom out
•
When the camera recognizes the shooting
scene, the shooting mode icon changes
accordingly.
Shooting mode icon
40
30
20
10
0
15m
-10
1010hPa
25
m
0s
880
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3
4
Press the shutter-release button
halfway.
•
When the subject is in focus, the focus
area or focus indicator is displayed in
green.
•
When you are using digital zoom, the
camera focuses in the center of the
frame and the focus area is not
displayed.
•
If the focus area or focus indicator flashes,
the camera is unable to focus. Modify the
composition and try pressing the shutter-
release button halfway again.
1/250
F2.8
Without lifting your finger, press
the shutter-release button the rest
of the way down.
B Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing
the remaining recording time flashes while images or movies are being saved. Do
not open the battery-chamber/memory card slot cover or remove the
battery or memory card while an indicator is flashing. Doing this could result in
loss of data, or in damage to the camera or the memory card.
C The Auto Off Function
• When no operations are performed for about one minute, the monitor turns off,
the camera enters standby mode, and then the power-on lamp flashes. The
camera turns off after remaining in standby mode for about three minutes.
• To turn the monitor back on while the camera is in standby mode, perform an
operation such as pressing the power switch or shutter-release button.
C When Using a Tripod
• We recommend using a tripod to stabilize the camera in the following situations:
- When the zoom is at a telephoto position
• When using a tripod to stabilize the camera during shooting, set Photo VR to Off
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Using the Zoom
When you move the zoom control, the zoom
lens position changes.
Telephoto
•
•
To zoom in: Move toward g
To zoom out: Move toward f
When you turn the camera on, the zoom
moves to the maximum wide-angle
position.
Wide-angle
•
•
A zoom indicator is displayed on the
shooting screen when the zoom control is
moved.
Digital zoom, which allows you to further
magnify the subject up to approximately 4×
the maximum optical zoom ratio, can be
Optical Digital
zoom zoom
activated by moving and holding the zoom control toward gwhen the
camera is zoomed in to the maximum optical zoom position.
C Digital Zoom
The zoom indicator changes to blue when the digital zoom is activated, and it
changes to yellow when the zoom magnification is increased further.
• Zoom indicator is blue: Image quality is not noticeably reduced by using the
Dynamic Fine Zoom.
• Zoom indicator is yellow: There may be cases in which image quality is noticeably
reduced.
• The indicator remains blue across a wider area when the image size is smaller.
The Shutter-release Button
To set focus and exposure (shutter speed and
aperture value), press the shutter-release button
lightly until you feel a slight resistance. Focus and
exposure remain locked while the shutter-release
button is pressed halfway.
Press halfway
Press the shutter-release button all the way to
release the shutter and take a picture.
Do not use force when pressing the shutter-release
button, as this may result in camera shake and
blurred images. Press the button gently.
Press all the
way
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Play Back Images
1
Press the c(playback)
button to enter playback
mode.
•
If you press and hold down the c
button while the camera is turned
off, the camera turns on in
playback mode.
2
Use the multi selector to select an Display the previous image
image to display.
•
Press and hold down HIJKto scroll
through the images quickly.
•
To return to shooting mode, press the A
button or shutter-release button.
Display the next image
•
•
•
When e is displayed in full-frame
playback mode, you can press the k
button to apply an effect to the image.
4
/
4
15m
1010hPa
0004. JPG
15 11 2015 15:30
/
/
Move the zoom control
toward g(i) in full-frame
playback mode to zoom in
on an image.
3.0
In full-frame playback mode,
move the zoom control
toward f(h) to switch to
thumbnail playback mode
and display multiple images
on the screen.
1
/
20
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Delete Images
1
Press the l(delete) button
to delete the image
currently displayed in the
monitor.
2
3
Use the multi selector HIto
select the desired deletion
method and press the kbutton.
Delete
Current image
Erase selected images
All images
•
To exit without deleting, press the d
button.
Select Yes and press the k
button.
Erase 1 image?
•
Deleted images cannot be recovered.
Yes
No
B Deleting Images Captured Continuously (Sequence)
• Images captured continuously are saved as a
sequence, and only the first image of the
sequence (the key picture) is displayed in
playback mode (default setting).
4
/
5
• If you press the lbutton while a key picture is
displayed for a sequence of images, all images in
the sequence are deleted.
0004. JPG
15
/
11 2015 15:30
/
• To delete individual images in a sequence, press
the kbutton to display them one at a time and press the lbutton.
C Deleting the Image Captured While in Shooting Mode
When using shooting mode, press the lbutton to delete the last image that was
saved.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Operating the Erase Selected Images Screen
Erase selected images
1
Use the multi selector JKto
select an image to be deleted, and
then use Hto display K.
•
To undo the selection, press Ito remove
K.
•
to switch to full-frame playback or f(h)
to switch to thumbnail playback.
Back
2
Add K to all images that you want to delete and then press
the kbutton to confirm the selection.
•
A confirmation dialog is displayed. Follow the on-screen instructions to
complete operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Changing the Shooting Mode
The shooting modes described below are available.
•
x Scene auto selector
The camera automatically recognizes the shooting scene when you frame a
picture, making it easier to take pictures using settings that suit the scene.
b Scene mode
•
•
•
Camera settings are optimized according to the scene that you select.
O Special effects
Effects can be applied to images during shooting.
F Smart portrait
Use glamour retouch to enhance human faces during shooting, and use the
smile timer or self-collage function to take pictures.
M Short movie show
The camera creates a short movie that is up to 30 seconds long (e 1080/
30p or S 1080/25p) by recording and automatically combining
multiple movie clips that are several seconds long.
A Auto mode
•
•
Used for general shooting. Settings can be changed to suit the shooting
conditions and the type of shot that you want to capture.
1
2
When the shooting screen
is displayed, press the A
(shooting mode) button.
Scene auto selector
Use the multi selector
HIto select a
shooting mode and
press the kbutton.
•
When scene mode or
special effects mode is
selected, press Kto select
a scene mode or effect
before pressing the kbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Using the Flash, Self-timer, Etc.
When the shooting screen is displayed, you can press the multi selector H(m)
J(n) I(p) K(o) to set the functions described below.
• mFlash mode
You can select a flash mode to match the shooting conditions.
• nSelf-timer
The camera releases the shutter 10 seconds or 2 seconds after you press the
shutter-release button.
• pMacro mode
Use macro mode when you take close-up pictures.
• oExposure compensation
You can adjust overall image brightness.
The functions that can be set vary depending on the shooting mode.
Recording Movies
Display the shooting screen and press the b(e
movie-record) button to start recording a movie.
Press the b(e) button again to end recording.
•
To play back a movie, select a movie in full-
frame playback mode and press the kbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Action Control
The operations described below can be performed by shaking or tilting the camera.
Displaying the Previous or Next Image in Full-
frame Playback Mode
In full-frame playback mode, shake the camera up/
down to display the next image, or forward/
backward to display the previous image (when
Playback action control in the setup menu
•
Make sure to hold the camera firmly with the
camera strap around your hand, and use your wrist
to shake the camera as shown in the illustration.
Using Action Menu
Press the V (action) button
Scene auto selector
to display the action menu.
•
Shake the camera to
select an option listed
below, and press the V
button to perform the
operation.
Confirm
Action menu
Option
Description
Shooting mode
selection
Select a shooting mode (only restricted to some
shooting modes).
q Start movie
recording
Press the V button to record/end a movie.
K Quick playback
U Current position
f Exit
Display an image in full-frame playback mode.
Display the current position on a map (only when the
Exit the action menu.
While the action menu is displayed, operations can be performed using only
the V button, shutter-release button, power switch, or Z button.
Adjusting the Map Display
•
You can scroll the displayed map by tilting the camera while pressing the V
button.
•
You can zoom in on the displayed map by shaking the camera once, and
zoom out by shaking it twice (when Map actions in the setup menu is set
to On).
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Shooting Features
x (Scene Auto Selector) Mode
The camera automatically recognizes the shooting scene when you frame a
picture, making it easier to take pictures using settings that suit the scene.
Enter shooting mode MA (shooting mode) button Mx (scene auto
selector) mode Mkbutton
When the camera automatically recognizes the shooting scene, the shooting
mode icon displayed on the shooting screen changes accordingly.
e
Portrait (for taking close-up portraits of one or two people)
Portrait (for taking portraits of large numbers of people, or images in
which the background takes up a large portion of the frame)
b
f
h
Landscape
Night portrait (for taking close-up portraits of one or two people)
Night portrait (for taking portraits of large numbers of people, or images
in which the background takes up a large portion of the frame)
c
g
i
j
d
a
d
Night landscape
Close-up
Backlighting (for taking pictures of subjects other than people)
Backlighting (for taking portrait pictures)
Underwater*
Other scenes
*
The camera is switched to underwater mode when it is lowered into water.
When the camera detects it is underwater while Record location data in
Location data options in the location data options menu is set to On and
positioning has been performed, the screen to select whether to record location
data on the image that is shot underwater is displayed. When you select Yes or No
and press the kbutton, the shooting screen is displayed.
B Notes About x (Scene Auto Selector) Mode
• Depending on shooting conditions, the camera may not select the desired scene
• When the digital zoom is in effect, the shooting mode icon changes to d.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
B After Taking the Camera Out of the Water
After taking the camera out of water, sometimes it may not automatically switch to
another scene from underwater mode.
Gently brush any water droplets with your hand from the camera or wipe it off with a
more information on caring for the camera.
Functions Available in x (Scene Auto Selector) Mode
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Scene Mode (Shooting Suited to Scenes)
When a scene is selected, camera settings are automatically optimized for the
selected scene.
Enter shooting mode MA (shooting mode) button Mb (second icon
from the top*) MKMHIMselect a scene Mkbutton
*
The icon of the last scene selected is displayed.
b Portrait (default setting)
c Landscape1, 2
i Dusk/dawn1, 2, 3
Z Beach2
z Snow2
h Sunset2, 3
1
2
3
The camera focuses at infinity.
The camera focuses on the area in the center of the frame.
Use of a tripod is recommended, because the shutter speed is slow. Set Photo VR
during shooting.
Displaying a Description of Each Scene Mode (Help Display)
Select a scene and move the zoom control
Easy panorama
that scene. To return to the previous screen,
move the zoom control toward g(j) again.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Tips and Notes
d Sports
• While the shutter-release button is held all the way down, the camera shoots up to
about 5 images continuously at a rate of about 7.0 fps (when image mode is set to
P).
• The frame rate for continuous shooting may vary depending on the current image
mode setting, the memory card used, or shooting conditions.
• Focus, exposure, and hue are fixed at the values determined with the first image in
each series.
e Night portrait
• On the screen displayed when e Night portrait is selected, select u Hand-held
or w Tripod.
• u Hand-held (default setting):
- While the e icon on the shooting screen is displayed in green, press the
shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking a picture, do not turn the camera off before
the monitor switches to the shooting screen.
- If the subject moves while the camera is shooting continuously, the image may
be distorted, overlapped, or blurred.
• w Tripod:
- One image is captured at a slow shutter speed when the shutter-release button
is pressed all the way.
is set to On.
f Party/indoor
• To avoid the effects of camera shake, hold the camera steady. Set Photo VR
during shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
j Night landscape
• On the screen displayed when j Night landscape is selected, select u Hand-
held or w Tripod.
• u Hand-held (default setting):
- While the j icon on the shooting screen is displayed in green, press the
shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking a picture, do not turn the camera off before
the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
• w Tripod:
- One image is captured at a slow shutter speed when the shutter-release button
is pressed all the way.
is set to On.
k Close-up
position at which it can focus.
• You can move the focus area. Press the kbutton, use the multi selector HIJK
to move the focus area, and press the kbutton to apply the setting.
u Food
position at which it can focus.
• You can adjust hue by using the multi selector
HI. The hue setting is saved in the camera’s
40
30
memory even after the camera is turned off.
20
10
• You can move the focus area. Press the kbutton,
0
15m
use the multi selector HIJKto move the
-10
1010hPa
focus area, and press the kbutton to apply the
setting.
25
m
0s
880
Download from Www.Somanuals.com. All Manuals Search And Download.
25
m Fireworks show
• The shutter speed is fixed at four seconds.
o Backlighting
• On the screen displayed when o Backlighting is selected, select ON or OFF to
enable or disable the high dynamic range (HDR) function based on the type of
image you want to capture.
• OFF (default setting): The flash fires to prevent the subject from being hidden in
shadow.
- When the shutter-release button is pressed all the way down, one image is
captured.
• ON: Use when taking pictures with very bright and dark areas in the same frame.
- When the shutter-release button is pressed all the way, the camera shoots
images continuously at high speed, and saves the following two images:
-
-
A non-HDR composite image
An HDR composite image in which the loss of details in highlights or shadows
is minimized
- If there is only enough memory to save one image, an image processed by D-
corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking a picture, do not turn the camera off before
the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
O Pet portrait
• When you point the camera at a dog or cat, the camera detects the pet’s face and
focuses on it. By default, the camera detects a dog or cat face and automatically
releases the shutter (pet portrait auto release).
• On the screen displayed when O Pet portrait is selected, select U Single or V
Continuous.
- U Single: The camera captures one image when a dog or cat face is detected.
- V Continuous: The camera captures three images continuously when a dog
or cat face is detected.
B Pet Portrait Auto Release
• Press the multi selector J(n) to change the Pet portrait auto release setting.
- Y: The camera detects a dog or cat face and automatically releases the shutter.
-
OFF: The camera does not release the shutter automatically, even if a dog or cat
face is detected. Press the shutter-release button. The camera also detects
human faces when OFF is selected.
• Pet portrait auto release is set to OFF after five bursts have been taken.
• Shooting is also possible by pressing the shutter-release button, regardless of the
Pet portrait auto release setting.
B Focus Area
• When the camera detects a face, the face is
displayed inside a yellow border. When the
40
30
camera acquires focus on a face displayed inside a
20
double border (focus area), the double border
changes to green. If no faces are detected, the
camera focuses on the subject in the center of the
frame.
10
0
15m
-10
1010hPa
25
m
0s
880
• Under some shooting conditions, the pet face
may not be detected and other subjects may be displayed inside a border.
C Underwater
water depth calibration are displayed followed by messages about waterproofing.
The next message is displayed when you press the multi selector Kafter reading
the messages. When the shutter-release button is pressed, the camera switches to
shooting mode without displaying any subsequent screens.
more information on shooting underwater.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Shooting Time-lapse Movies
The camera can automatically capture 300 still images at a specified interval to
create time-lapse movies (e 1080/30p) that are approximately 10 seconds
long.
Enter shooting mode MA (shooting mode) button Mb (second icon
from the top*) MKMHIMN (time-lapse movie) Mkbutton
*
The icon of the last scene selected is displayed.
Type
Interval time
Recording time
O Cityscape (10 minutes) (default
setting)
2 seconds
10 minutes
P Landscape (25 minutes)
5 seconds
25 minutes
50 minutes
Q Sunset (50 minutes)
10 seconds
2 hours 30
minutes
R Night sky (150 minutes)1
30 seconds
30 seconds
2 hours 30
minutes
S Star trails (150 minutes)2
1
2
Suited for recording the movement of stars. The focus is fixed at infinity.
Star movement appears as lines of light due to image processing. The focus is
fixed at infinity.
Cityscape (10 minutes)
1
Use the multi selector HIto
select a type, and press the k
button.
AE-L off
2
Select whether or not to fix
exposure (brightness), and press
the kbutton (except for R and
S).
•
When AE-L on is selected, the exposure is
fixed based on the first image.
Select AE-L off when shooting under
conditions with extreme changes in brightness, such as during sunset.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
3
4
Stabilize the camera by using a tool such as a tripod.
Press the shutter-release button to
40
capture the first image.
30
20
10
0
10
m
0s
•
releasing the shutter for the first image.
Exposure compensation cannot be
changed after the first image is captured.
Focus and hue are fixed when the first
image is captured.
15m
-10
1010hPa
25
m
0s
880
•
•
•
•
The shutter is automatically released for the second and subsequent images.
The monitor may turn off while the camera is not capturing images.
Shooting ends automatically when 300 images are captured.
Press the kbutton to end shooting before the specified recording time
elapses and save the time-lapse movie.
•
Audio and still images cannot be saved.
B Notes About Time-lapse Movie
• The camera cannot capture images if a memory card is not inserted. Do not
exchange the memory card until shooting is complete.
• Use a fully charged battery to prevent the camera from turning off unexpectedly.
• Time-lapse movies cannot be recorded by pressing the b(emovie-record)
button.
set to On.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Shooting with Easy Panorama
Enter shooting mode MA (shooting mode) button Mb (second icon
from the top*) MKMHIMp (easy panorama) Mkbutton
*
The icon of the last scene selected is displayed.
Normal
1
Select W Normal or X Wide
as the shooting range and press
the kbutton.
•
When the camera is readied in the
horizontal position, the image size (width ×
height) is as follows:
-
W Normal: 4800 × 920 when moved
horizontally, 1536 × 4800 when moved
vertically
-
X Wide: 9600 × 920 when moved horizontally, 1536 × 9600 when
moved vertically
2
3
Frame the first edge of the
panorama scene, and then press
the shutter-release button
halfway to focus.
40
30
20
10
0
15m
-10
1010hPa
•
The zoom position is fixed at wide-angle
position.
25
m
0s
880
•
The camera focuses in the center of the
frame.
Press the shutter-release button
all the way, and then remove your
finger from the shutter-release
button.
•
KLJI are displayed to indicate the
direction of camera movement.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
4
Move the camera in one of the
four directions until the guide
indicator reaches the end.
Guide
•
•
•
When the camera detects which direction it
is moving in, shooting begins.
Shooting ends when the camera captures
the specified shooting range.
Focus and exposure are locked until
shooting ends.
Example of camera movement
•
•
Using your body as the axis of rotation, move the camera slowly in an arc, in
the direction of the marking (KLJI).
Shooting stops if the guide does not reach the edge within about 15
seconds (when W Normal is selected) or within about 30 seconds (when
X Wide is selected) after shooting starts.
B Notes About Easy Panorama Shooting
• The range of the image seen in the saved image is narrower than that seen in the
monitor at the time of shooting.
• If the camera is moved too quickly or shaken too much, or if the subject is too
uniform (e.g. walls or darkness), an error may occur.
• If shooting is stopped before the camera reaches the half-way point in the
panorama range, a panorama image is not saved.
• If more than half of the panorama range is captured but shooting ends before
reaching the edge of the range, the range not captured is recorded and displayed
in gray.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Playback with Easy Panorama
4
/
4
image captured using easy panorama in full-
frame playback mode, and then press the k
button to scroll the image in the direction that
was used when shooting.
15m
1010hPa
0004. JPG
15 11 2015 15:30
/
/
Playback controls are displayed in the monitor
during playback.
Use the multi selector JKto select a control,
and then press the kbutton to perform the
operations described below.
Function
Rewind
Icon
A
B
Description
Hold down the kbutton to scroll backward quickly.
Advance
Hold down the kbutton to scroll forward quickly.
Pause playback. The operations listed below can be
performed while paused.
C
D
F
Hold down the kbutton to rewind.
Hold down the kbutton to scroll.
Resume automatic scrolling.
Pause
End
E
G
Switch to full-frame playback mode.
B Notes About Easy Panorama Images
• The images cannot be edited on this camera.
• This camera may not be able to scroll the playback of, or zoom in on, easy
panorama images captured with another make or model of digital camera.
B Notes About Printing Panorama Images
The entire image may not be able to be printed depending on the printer’s settings.
Additionally, printing may not be possible depending on the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Special Effects Mode (Applying Effects
When Shooting)
Effects can be applied to images during shooting.
Enter shooting mode MA (shooting mode) button MO (third icon
from the top*) MKMHIMselect an effect Mkbutton
*
The icon of the last effect selected is displayed.
Type
O Soft
(default setting)
Description
Softens the image by adding a slight blur to the entire
image.
P Nostalgic
sepia
Adds a sepia tone and reduces the contrast to simulate
the qualities of an old photograph.
F High-contrast
monochrome
Changes the image to black and white and gives it sharp
contrast.
Creates a black and white image in which only the
specified color remains.
I Selective color
l Pop
Increases the color saturation of the entire image to create
a bright look.
Gives the image a mysterious appearance based on a
specific color.
o Cross process
m Toy camera
effect 1
Gives the entire image a yellowish hue and darkens the
image periphery.
n Toy camera
effect 2
Decreases the color saturation of the entire image and
darkens the image periphery.
•
•
The camera focuses on the area in the center of the frame.
When Selective color or Cross process is
selected, use the multi selector HIto select
the desired color, and press the kbutton to
apply the color. To change the color
selection, press the kbutton again.
Save
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Smart Portrait Mode (Enhancing Human
Faces When Shooting)
You can take a picture with the glamour retouch function to enhance human
faces.
Enter shooting mode MA (shooting mode) button MF Smart portrait
mode Mkbutton
1
2
Press the multi selector K.
Apply an effect.
Slider
•
•
•
Use JKto select an effect.
Use HIto adjust the amount of effect.
You can simultaneously apply multiple
effects.
Skin softening
B Skin softening, l Foundation
makeup, Q Soft, G Vividness, o
Brightness (Exp. +/-)
•
•
Select y Exit to hide the slider.
Press the kbutton after checking the
settings for all effects.
Effect
3
Frame the picture and press the shutter-release button.
B Notes About Smart Portrait Mode
The amount of effect may differ between the image on the shooting screen and the
saved image.
C Glamour Retouch Settings
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Functions Available in Smart Portrait Mode
•
•
•
•
•
•
Using Smile Timer
Enter shooting mode MA (shooting mode) button MF Smart portrait
mode Mkbutton
When you press the multi selector Jto select
a Smile timer and press the kbutton, the
camera automatically releases the shutter
whenever a smiling face is detected.
•
Set the glamour retouch function before
Smile timer
•
When you press the shutter-release button to
take a picture, smile timer is terminated.
B Notes About Smile Timer
Under some shooting conditions, the camera may be unable to detect faces or
C When the Self-timer Lamp Flashes
When using smile timer, the self-timer lamp flashes when the camera detects a face
and flashes quickly immediately after the shutter is released.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Using Self-Collage
The camera can capture a series of four or nine
images at intervals and save them as a one-
frame image (a collage image).
5
/
5
15m
1010hPa
0005. JPG
15 11 2015 15:30
/
/
Enter shooting mode MA (shooting mode) button MF Smart portrait
mode Mkbutton
1
Press the multi selector Jto
select n Self-Collage, and press
the kbutton.
•
•
A confirmation dialog is displayed.
Self-Collage
When you press the dbutton and select
Self-Collage before pressing J, you can
configure the settings for Number of
shots, Interval, and Shutter sound
•
If you want to apply glamour retouch when
shooting, set the effect before selecting
2
Take a picture.
•
When you press the shutter-release button,
a countdown starts (about five seconds)
and the shutter is automatically released.
•
The camera automatically releases the
shutter for the remaining pictures. A
countdown starts about three seconds
before shooting.
2
•
•
•
The number of shots is indicated by Uin the monitor. It is displayed in green
during shooting and it changes to white after shooting.
When the camera finishes taking the specified number of shots, the collage
image is saved.
Each captured image is saved as an individual image separate from the
collage image. The individual images are saved as a sequence, and a one-
Download from Www.Somanuals.com. All Manuals Search And Download.
36
B Notes About Self-Collage
• If you press the shutter-release button before the camera takes the specified
number of shots, shooting is canceled and the collage image is not saved. The
pictures that were taken before shooting was canceled are saved as individual
images.
• This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Short Movie Show Mode (Combining
Movie Clips to Create Short Movies)
The camera creates a short movie that is up to 30 seconds long (e 1080/
30p or S 1080/25p) by recording and automatically combining multiple
movie clips that are several seconds long.
Enter shooting mode MA (shooting mode) button MM Short movie
show mode Mkbutton
1
Press the d(menu) button and
configure the settings for
recording movies.
Number of shots
Special effects
Background music
End recording
•
Number of shots: Set the number of
movie clips that the camera records and the
recording time for each movie clip. By
default, the camera records 15 movie clips
that are 2 seconds each to create a 30-
second short movie.
•
•
•
Effects can be changed for each movie clip.
Background music: Select the background music. You can preview it by
After the settings are complete, press the dbutton or shutter-release
button to exit the menu.
2
Press the b(emovie-record)
button to record a movie clip.
40
30
20
10
0
•
The camera automatically stops recording
the movie clip when the time specified in
step 1 elapses.
0
15
15m
-10
1010hPa
•
Movie clip recording can be paused
temporarily.
25
m
0s
880
Download from Www.Somanuals.com. All Manuals Search And Download.
38
3
4
Check the recorded movie clip, or
delete it.
40
30
20
10
0
•
•
To check it, press the kbutton.
To delete it, press the lbutton. The last
recorded movie clip or all movie clips can
be deleted.
12
15
15m
-10
1010hPa
Preview
24
m
36
880
s
•
•
To continue recording movie clips, repeat
the operation in step 2.
To change the effects, return to step 1.
Number of movie clips
recorded
Save the short movie show.
•
The short movie show is saved when the camera finishes recording the
specified number of movie clips.
•
To save a short movie show before the camera finishes recording the
specified number of movie clips, press the dbutton when the shooting
standby screen is displayed, and then select End recording.
Movie clips are deleted when a short movie show is saved.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Operations During Movie Clip Playback
16s
To adjust the volume, move the zoom control
Playback controls are displayed in the monitor.
The operations described below can be
performed by using the multi selector JKto
select a control and then pressing the k
button.
Playback controls
Description
Function
Rewind
Icon
A
B
Hold down the kbutton to rewind the movie.
Advance
Hold down the kbutton to advance the movie.
Pause playback. The operations listed below can be
performed while paused.
Rewind the movie one frame. Hold down
C
the kbutton for continuous rewinding.
Pause
E
Advance the movie one frame. Hold down
D
the kbutton for continuous advancing.
F
Resume playback.
End playback
End recording
G
Return to the shooting screen.
Save the short movie show using the recorded
movie clips.
p
B Notes About Recording a Short Movie Show
• The camera cannot record movies if a memory card is not inserted.
• Do not exchange the memory card until a short movie show is saved.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
C Pausing Movie Recording
• A still image (l 4608×2592) can be captured if you press the shutter-release
button when the shooting standby screen is displayed.
• You can pause movie recording and play back images or enter other shooting
modes to take pictures. Movie recording resumes when you enter short movie
show mode again.
Functions Available in Short Movie Show Mode
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
41
A (Auto) Mode
Used for general shooting. Settings can be adjusted to suit the shooting
conditions and the type of shot you want to capture.
Enter shooting mode MA (shooting mode) button MA (auto) mode M
kbutton
•
You can change how the camera selects the area of the frame to focus on by
Functions Available in A (Auto) Mode
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Using the Creative Slider
You can adjust the brightness (exposure compensation), vividness, and hue
when shooting.
Enter shooting mode MA (shooting mode) button MA (auto) mode M
kbutton
1
2
Press the multi selector K.
Brightness (Exp. +/-)
Use JKto select an item.
•
F Hue: Adjust the hue (reddish/bluish) of
the entire image.
•
G Vividness: Adjust the vividness of the
entire image.
• oBrightness (Exp. +/-): Adjust the
brightness of the entire image.
3
Use HIto adjust the level.
Slider
•
•
•
•
You can preview the results on the monitor.
To set another item, return to step 2.
Select y Exit to hide the slider.
To cancel all settings, select P Reset and
press the kbutton. Return to step 2 and
adjust the settings again.
Brightness (Exp. +/-)
Histogram
4
Press the kbutton when setting is complete.
•
The settings are applied and the camera returns to the shooting screen.
C Creative Slider Settings
• This function may not be available to use in combination with other functions
• The settings for brightness (exposure compensation), vividness and hue are saved
in the camera’s memory even after the camera is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Flash Mode
You can select a flash mode to match the shooting conditions.
1
2
Press the multi selector H(m).
Auto
Select the desired flash mode
•
If the setting is not applied by pressing the
kbutton within a few seconds, the
selection will be canceled.
C The Flash Lamp
• The status of the flash can be confirmed by
pressing the shutter-release button halfway.
- On: The flash fires when you press the
shutter-release button all the way down.
- Flashing: The flash is charging. The camera
cannot shoot images.
- Off: The flash does not fire when a picture is
taken.
• If the battery level is low, the monitor turns off while the flash is charging.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Available Flash Modes
Auto
U
The flash fires when necessary, such as in dim lighting.
•
The flash mode icon on the shooting screen is displayed only
immediately after the setting is made.
Auto with red-eye reduction
Reduce “red-eye” in portraits caused by the flash.
Off
V
W
The flash does not fire.
•
We recommend using a tripod to stabilize the camera when shooting
in dark surroundings.
Fill flash
X
The flash fires whenever a picture is taken. Use to “fill-in” (illuminate)
shadows and backlit subjects.
Slow sync
Y
Suited to evening and night portraits that include background scenery.
The flash fires when necessary to illuminate the main subject; slow
shutter speeds are used to capture background at night or under dim
lighting.
C The Flash Mode Setting
• The setting applied in A (auto) mode is saved in the camera’s memory even after
the camera is turned off.
C Red-eye Reduction
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the
red-eye effect. If the camera detects red-eye while saving an image, the affected area
is processed to reduce red-eye before the image is saved.
Note the following when shooting:
• Because pre-flashes are fired, there is a slight lag between when the shutter-release
button is pressed and when the image is shot.
• More time than usual is required to save images.
• Red-eye reduction may not produce the desired results in some situations.
• In rare cases, red-eye reduction may be applied unnecessarily to other areas of the
image. In these cases, select another flash mode and take the picture again.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Self-timer
The camera is equipped with a self-timer that releases the shutter 10 seconds
or 2 seconds after you press the shutter-release button.
stabilize the camera during shooting.
1
2
Press the multi selector J(n).
Self-timer
Select n10s or n2s, and press
the kbutton.
• n10s (10 seconds): Use on important
occasions, such as weddings.
• n2s (2 seconds): Use to prevent camera
shake.
•
If the setting is not applied by pressing the
kbutton within a few seconds, the
selection will be canceled.
•
•
When the shooting mode is Pet portrait scene mode, Y (pet portrait auto
When the shooting mode is smart portrait mode, you can also use a Smile
3
4
Frame the picture and press the shutter-release button
halfway.
•
Focus and exposure are set.
Press the shutter-release
button the rest of the way
down.
9
•
Countdown starts. The self-timer
lamp flashes and then glows
steadily about one second before
the shutter is released.
1/250
F2.8
•
•
When the shutter is released, the
self-timer is set to OFF.
To stop the countdown, press
the shutter-release button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Macro Mode (Taking Close-up Pictures)
Use macro mode when taking close-up pictures.
1
2
Press the multi selector I(p).
Macro mode
Select ON and press the k
button.
•
If the setting is not applied by pressing the
kbutton within a few seconds, the
selection will be canceled.
3
Move the zoom control to set the
zoom ratio to a position where F
and the zoom indicator are
displayed in green.
40
•
When the zoom ratio is set to a position where the zoom indicator is
displayed in green, the camera can focus on subjects as close as
approximately 10 cm (4 in.) from the lens.
When the zoom is at the position where G is displayed, the camera can
focus on subjects as close as approximately 1 cm (0.4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm
(1 ft 8 in.).
C The Macro Mode Setting
• If the setting is applied in A (auto) mode, it will remain saved in the camera’s
memory even after the camera is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Exposure Compensation (Adjusting
Brightness)
You can adjust overall image brightness.
1
2
Press the multi selector K(o).
Exposure compensation
Select a compensation value and
press the kbutton.
•
•
•
•
To brighten the image, set a positive (+)
value.
To darken the image, set a negative (–)
value.
The compensation value is applied, even
without pressing the kbutton.
When the shooting mode is smart portrait
mode, the glamour retouch screen is
Histogram
When the shooting mode is A (auto) mode, the creative slider is displayed
•
C Exposure Compensation Value
• When the exposure compensation is set while using the flash, the compensation is
applied to both the background exposure and to the flash output.
C Using the Histogram
A histogram is a graph showing the distribution of tones in the image. Use as a guide
when using exposure compensation and shooting without the flash.
• The horizontal axis corresponds to pixel brightness, with dark tones to the left and
bright tones to the right. The vertical axis shows the number of pixels.
• Increasing the exposure compensation value shifts the tone distribution to the
right, and decreasing it shifts the tone distribution to the left.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Default Settings (Flash, Self-timer, Etc.)
Default settings for each shooting mode are listed below.
Exposure
compensation
Flash
Self-timer
Macro
x (scene auto
selector)
U1
Off2
Off
0.0
C (scene)
Off3
Off3
b (portrait)
c (landscape)
V
W3
Off
Off
0.0
0.0
N (time-lapse
movie)
W3
Off3
Off
0.04
W3
Off3
Off
Off
Off
Off
Off
Off
Off3
Off3
Off3
Off3
Off3
Off3
Off3
d (sports)
0.0
0.0
0.0
0.0
0.0
0.0
0.0
V5
V6
U
U
W3
e (night portrait)
f (party/indoor)
Z (beach)
z (snow)
h (sunset)
W3
i (dusk/dawn)
j (night
landscape)
W3
Off3
Off
0.0
On3
On3
Off3
Off3
Off3
Off
k (close-up)
W
Off
0.0
0.0
0.03
0.0
0.0
0.0
0.0
W3
W3
X/W7
u (food)
Off
Off3
m (fireworks show)
o (backlighting)
p (easy panorama) W3
Off
Off3
Y8
Off
W3
O (pet portrait)
C (underwater)
W
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Exposure
compensation
(A48)
Flash
(A44)
Self-timer
(A46)
Macro
(A47)
R (special effects)
W
Off
Off9
Off
Off
Off
Off3
0.0
10
F (smart portrait)
M (short movie show) W3
U
–
Off
0.0
11
A (auto)
U
Off
–
1
The camera automatically selects the flash mode appropriate for the scene it has
selected. W (off) can be selected manually.
Cannot be changed. The camera enters macro mode when i is selected.
Cannot be changed.
Cannot be changed when Night sky (150 minutes) or Star trails (150
minutes) is selected.
Cannot be changed. The flash mode setting is fixed at fill flash with red-eye
reduction when Tripod is set.
Slow sync with red-eye reduction flash mode may be used.
Flash is fixed at X (fill flash) when HDR is set to OFF, and is fixed at W (off) when
HDR is set to ON.
self-timer.
2
3
4
5
6
7
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Focusing
The focus area varies depending on the shooting mode.
Using Face Detection
In the following shooting modes, the camera
uses face detection to automatically focus on
40
30
human faces.
20
10
•
•
Portrait or Night portrait scene mode
0
15m
-10
1010hPa
25
m
0s
•
•
880
If the camera detects more than one face, a double border is displayed around
the face that the camera focuses on, and single borders are displayed around
the other faces.
If the shutter button is pressed halfway when no faces are detected:
•
•
•
In x (scene auto selector) mode, the focus area changes depending on the
scene.
In Portrait and Night portrait scene modes or in smart portrait mode, the
camera focuses in the center of the frame.
In A (auto) mode, the camera selects the focus area containing the subject
closest to the camera.
B Notes About Face Detection
• The camera’s ability to detect faces depends on a variety of factors, including the
direction in which the faces are looking.
• The camera cannot detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
C Face Detection During Movie Recording
camera focuses on human faces during movie recording. If the b(emovie-record)
button is pressed when no faces are detected, the camera focuses on the area in the
center of the frame.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Using Skin Softening
When the shutter is released while using one of the shooting modes listed
below, the camera detects human faces and processes the image to soften
facial skin tones (up to three faces).
•
-
The amount of Skin softening effect can be adjusted.
•
•
Editing functions such as Skin softening can be applied to saved images by
B Notes About Skin Softening
• It may take more time than usual to save images after shooting.
• Under some shooting conditions, the desired skin softening results may not be
achieved, and skin softening may be applied to areas of the image where there are
no faces.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Using Target Finding AF
the camera focuses in the manner described below when you press the
shutter-release button halfway.
•
The camera detects the main subject and
focuses on it. When the subject is in focus,
the focus area is displayed in green. If a
human face is detected, the camera
automatically sets focus priority on it.
40
30
20
10
0
15m
-10
1010hPa
25
m
0s
880
Focus areas
•
If no main subject is detected, the camera
automatically selects one or more of the nine
focus areas containing the subject closest to
the camera. When the subject is in focus, the
focus areas that are in focus are displayed in
green.
1/250
F2.8
Focus areas
B Notes About Target Finding AF
• Depending on shooting conditions, the subject that the camera determines to be
the main subject may vary.
• The main subject may not be detected when using certain White balance
settings.
• The camera may not detect the main subject appropriately in the following
situations:
- When the subject is very dark or bright
- When the main subject lacks clearly defined colors
- When the shot is framed so that the main subject is at the edge of the monitor
- When the main subject is composed of a repeating pattern
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Subjects Not Suitable for Autofocus
The camera may not focus as expected in the following situations. In rare cases,
the subject may not be in focus despite the fact that the focus area or the focus
indicator is displayed in green:
•
•
Subject is very dark
Objects of sharply differing brightness are included in the scene (e.g. the sun
behind the subject makes that subject appear very dark)
No contrast between the subject and surroundings (e.g. a portrait subject
wearing a white shirt is standing in front of a white wall)
Several objects are at different distances from the camera (e.g. the subject is
inside a cage)
Subjects with repeating patterns (window blinds, buildings with multiple
rows of similarly shaped windows, etc.)
Subject is moving rapidly
•
•
•
•
In the situations noted above, try pressing the shutter-release button halfway
to refocus several times, or focus on another subject positioned at the same
distance from the camera as the actual desired subject, and use focus lock
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Focus Lock
Focus lock shooting is recommended when the camera does not activate the
focus area that contains the desired subject.
1
2
Position the subject in the
center of the frame and
press the shutter-release
button halfway.
•
The camera focuses on the
subject and the focus area is
displayed in green.
1/250
F2.8
•
Exposure is also locked.
3
4
Without lifting your finger,
recompose the picture.
•
Make sure to maintain the same distance
between the camera and the subject.
1/250
F2.8
Press the shutter-release button
the rest of the way down to take
the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Functions That Cannot Be Used
Simultaneously When Shooting
Some functions cannot be used with other menu options.
Restricted function
Option
Description
When a setting other than
Single is selected, the flash
cannot be used.
When Blink proof is set to On,
the flash cannot be used.
Flash mode
When Underwater flash is set
to On, Auto with red-eye
reduction cannot be selected. If
Auto with red-eye reduction
was selected beforehand, the
setting changes to Auto.
Underwater flash
When Subject tracking is
selected, the self-timer cannot be
used.
Self-timer
When Subject tracking is
selected, macro mode cannot be
used.
Macro mode
Image mode is set as follows
depending on the continuous
shooting setting:
•
•
•
Pre-shooting cache: M
Image mode
(image size: 1280 × 960 pixels).
Continuous H: 120 fps: O
(image size: 640 × 480 pixels)
Continuous H: 60 fps: M
(image size: 1280 × 960 pixels)
When Hue is adjusted using the
Hue (Using the creative creative slider, White balance
White balance
Continuous
setting is not available in the
shooting menu.
If the self-timer is used when Pre-
shooting cache is selected, the
setting is fixed at Single.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Restricted function
ISO sensitivity
Option
Description
When Pre-shooting cache,
Continuous H: 120 fps, or
Continuous H: 60 fps is
selected, ISO sensitivity is fixed
at Auto.
When a setting other than Auto
is selected for White balance in
Target finding AF mode, the
camera does not detect the main
subject.
AF area mode
Blink proof
When Self-Collage is set, Blink
proof is disabled.
When a setting other than
Single is selected, date and time
cannot be stamped on images.
Date stamp
When Blink proof is set to On,
date and time cannot be
imprinted on images.
If the flash fires when On
(hybrid) is selected, Photo VR
operates using the On setting.
If the self-timer is used when On
(hybrid) is selected, Photo VR
operates using the On setting.
If Continuous is set to any setting
other than Single when On
(hybrid) is selected, Photo VR
operates using the On setting.
Photo VR
If ISO sensitivity is set to Fixed
range auto or ISO 400 or higher
when On (hybrid) is selected,
Photo VR operates using the On
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Restricted function
Digital zoom
Option
Description
When Subject tracking is
selected, digital zoom cannot be
used.
When a setting other than
Single is selected, the shutter
sound is disabled.
Shutter sound
B Notes About Digital Zoom
• Depending on the shooting mode or the current settings, digital zoom may not be
• When digital zoom is in effect, the camera focuses in the center of the frame.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Playback Features
Playback Zoom
Moving the zoom control toward g(iplayback zoom) in full-frame playback
Displayed area guide
g
4
/
4
(i)
15m
1010hPa
f
(h)
0004. JPG
15 11 2015 15:30
3.0
/
/
Full-frame Playback
Image is zoomed in.
•
You can change the magnification rate by moving the zoom control toward
f(h) or g(i).
•
•
To view a different area of the image, press the multi selector HIJK.
When a zoomed image is displayed, press the kbutton to return to full-
frame playback mode.
C Cropping Images
When a zoomed image is displayed, you can press the dbutton to crop the image
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Thumbnail Playback/Calendar Display
Moving the zoom control toward f(hthumbnail playback) in full-frame
f
(h)
f
(h)
1
/
20
1 / 20
4
2015 11
Sun
M
on
Tue
W
ed
Thu
F
ri
Sat
1
2
3
4
5
6
7
8
15
22
29
9
16
23
30
10
17
24
11
18
25
12
19
26
13
14
21
28
20
27
15m
1010hPa
g
g
0004. JPG
15 11 2015 15:30
/
/
(i)
(i)
Full-frame Playback
Thumbnail Playback
Calendar Display
•
•
You can change the number of thumbnails displayed by moving the zoom
control toward f(h) or g(i).
While using thumbnail playback mode, press the multi selector HIJKto
select an image and then press the kbutton to display that image in full-
frame playback mode.
•
While using calendar display mode, press HIJKto select a date and
then press the kbutton to display the images captured on that day.
B Notes About Calendar Display
Images captured when the camera’s date is not set are treated as images captured
on January 1, 2015.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
List by Date Mode
Press the cbutton (playback mode) Mcbutton MC List by date M
kbutton
Use the multi selector HIto select a date and
then press the kbutton to play back the
images captured on the selected date.
List by date
2 0 / 1 1 / 2 0 1 5
1 5 / 1 1 / 2 0 1 5
1 0 / 1 1 / 2 0 1 5
0 5 / 1 1 / 2 0 1 5
•
be used for the images in the selected
shooting date (except Copy).
•
The following operations are available while
the shooting date selection screen is
displayed.
- dbutton: The functions listed below are available.
•
•
*
Slide show
Protect*
The same settings can be applied to all images captured on the selected
date.
- lbutton: Deletes all images captured on the selected date.
B Notes About List by Date Mode
• Up to the most recent 29 dates can be selected. If images exist for more than 29
dates, all images saved earlier than the most recent 29 dates will be combined
under Others.
• The 9,000 most recent images can be displayed.
• Images captured when the camera’s date is not set are treated as images captured
on January 1, 2015.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Viewing and Deleting Images Captured
Continuously (Sequence)
Viewing Images in a Sequence
Images captured continuously or with the self-collage function are saved as a
sequence.
4
/
5
The first image of a sequence is used as the key
picture to represent the sequence when
displayed in full-frame playback mode or
thumbnail playback mode (default setting). For
the self-collage function, a collage image is used
as the key picture.
0004. JPG
To display each image in the sequence
15
/
11 2015 15:30
/
individually, press the kbutton.
After pressing the kbutton, the operations
listed below are available.
•
To display the previous or next image, press
the multi selector JK.
•
To display images that are not included in the
sequence, press Hto return to the key
picture display.
Back
15/11/2015 15 30
:
•
To display images in a sequence as
thumbnails, or to play them back in a slide
show, set Sequence display options to Individual pictures in the
B Sequence Display Options
Images captured continuously with cameras other than this camera cannot be
displayed as a sequence.
C Playback Menu Options Available When Using Sequence
• When images in a sequence are displayed in full-frame playback mode, press the
• If you press the dbutton when a key picture is displayed, the following settings
can be applied to all images in the sequence:
- Mark for Wi-Fi upload, Protect, Copy
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Deleting Images in a Sequence
When the l(delete) button is pressed for images in a sequence, the images
that are deleted vary depending on how the sequences are displayed.
•
When the key picture is displayed:
-
Current image:
All images in the displayed sequence are
deleted.
-
Erase selected images: When a key picture is selected on the erase
in that sequence are deleted.
-
All images:
All images on the memory card or in the
internal memory are deleted.
•
When images in a sequence are displayed in full-frame playback mode:
-
-
Current image:
The image currently displayed is deleted.
Erase selected images: Images that are selected in the sequence
are deleted.
-
Entire sequence:
All images in the displayed sequence are
deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Editing Images (Still Images)
Before Editing Images
You can easily edit images on this camera. Edited copies are saved as separate
files.
Edited copies are saved with the same shooting date and time as the original.
C Restrictions on Image Editing
• An image can be edited up to 10 times.
• You may not be able to edit images of a certain size or with certain editing
functions.
Quick Effects: Changing Hue or Mood
Quick effects type
Description
Painting/Photo illustration/Soft portrait/
Portrait (color + B&W)/Fisheye/
Cross screen/Miniature effect
Processes images with a variety
of effects.
Reduces blurring of images
caused by underwater shooting.
Fog removal
1
Display the image to which you
want to apply an effect in full-
frame playback mode and press
the kbutton.
0004. JPG
15
/
11 2015 15:30
/
Quick effects
2
Use the multi selector HIJKto
select the desired effect and press
the kbutton.
Painting Photo illustration Soft portrait
•
to switch to full-frame playback or f(h)
to switch to thumbnail playback.
Portrait
(color + B&W)
Fisheye
Cross screen
Cancel
•
To exit without saving the edited image,
press the dbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
3
Select Yes and press the kbutton.
•
An edited copy is created.
Quick Retouch: Enhancing Contrast and Saturation
Press the cbutton (playback mode) Mselect an image Mdbutton
MQuick retouch Mkbutton
Quick retouch
Use the multi selector HIto select
the amount of effect applied and press
the kbutton.
•
The edited version is displayed on the right.
•
To exit without saving the copy, press J.
Normal
Amount
Download from Www.Somanuals.com. All Manuals Search And Download.
65
D-Lighting: Enhancing Brightness and Contrast
Press the cbutton (playback mode) Mselect an image Mdbutton
MD-Lighting Mkbutton
D-Lighting
Use the multi selector HIto select
OK and press the kbutton.
•
•
The edited version is displayed on the right.
To exit without saving the copy, select Cancel
and press the kbutton.
OK
Cancel
Red-eye Correction: Correcting Red-eye When
Shooting with the Flash
Press the cbutton (playback mode) Mselect an image Mdbutton
MRed-eye correction Mkbutton
Red-eye correction
Preview the result and press the k
button.
•
To exit without saving the copy, press the multi
selector J.
Back
Save
B Notes About Red-eye Correction
• Red-eye correction can only be applied to images when red-eye is detected.
• Red-eye correction can be applied to pets (dogs or cats) even if their eyes are not
red.
• Red-eye correction may not produce the desired results in some images.
• In rare cases, red-eye correction may be applied unnecessarily to other areas of the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Glamour Retouch: Enhancing Human Faces
Press the cbutton (playback mode) Mselect an image Mdbutton
MGlamour retouch Mkbutton
Subject selection
1
2
Use the multi selector HIJKto
select the face that you want to
retouch and press the kbutton.
•
When only one face is detected, proceed to
step 2.
Back
Small face
Use JKto select the effect, use
HIto select the effect level, and
press the kbutton.
3
2
1
•
You can simultaneously apply multiple
effects.
Adjust or check the settings for all effects
before pressing the kbutton.
F (Small face), B (Skin softening), l
Back
(Foundation makeup), m (Glare reduction), E (Hide eye bags), A (Big
eyes), G (Whiten eyes), n (Eye shadow), o (Mascara), H (Whiten teeth),
p (Lipstick), D (Redden cheeks)
•
Press the dbutton to return to the screen for selecting a person.
Preview
3
Preview the result and press the
kbutton.
•
To change the settings, press Jto return to
step 2.
•
To exit without saving the edited image,
press the dbutton.
Save
Download from Www.Somanuals.com. All Manuals Search And Download.
67
4
Select Yes and press the k
button.
Save OK?
•
An edited copy is created.
Yes
No
B Notes About Glamour Retouch
• Only one face at a time can be edited. To retouch another face in the same image,
select the edited copy of the image and make additional changes.
• Depending on the direction in which faces are looking, or the brightness of faces,
the camera may be unable to accurately detect faces, or the glamour retouch
function may not perform as expected.
• If no faces are detected, a warning is displayed and the screen returns to the
playback menu.
• The glamour retouch function is available only for images captured at an ISO
sensitivity of 1600 or lower.
Data Imprint: Imprinting Information Such as
Altitude and Direction Measured by the Electronic
Compass on Images
Press the cbutton (playback mode) Mselect an image Mdbutton
MData imprint Mkbutton
Data imprint
Use the multi selector HIto select
OK and press the kbutton.
•
The information to be imprinted on images
includes the altitude or water depth,
atmospheric pressure, direction measured
by the electronic compass, date/time, and
latitude and longitude recorded on images
15/11/2015
OK
Cancel
•
To exit without saving the copy, select Cancel and press the kbutton.
B Notes About Data Imprint
• Only the information recorded on images is imprinted on the images.
• The information may not be displayed properly if the image size is small.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Small Picture: Reducing the Size of an Image
Press the cbutton (playback mode) Mselect an image Mdbutton
MSmall picture Mkbutton
Small picture
1
2
Use the multi selector HIto
select the desired copy size and
press the kbutton.
640 480
×
320 240
×
•
Images captured at an image mode setting
of l 4608×2592 are saved at a size of 640
× 360, and images captured at an image
mode setting of s 3456×3456 are saved
at a size of 480 × 480. Press the kbutton to
proceed to step 2.
160 120
×
Select Yes and press the k
button.
Create small picture file?
•
An edited copy is created (compression
ratio of approximately 1:8).
Yes
No
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Crop: Creating a Cropped Copy
1
2
Adjust the image so that only the
portion that you want to keep is
displayed, and then press the d
(menu) button.
•
Move the zoom control toward g(i) or
f(h) to adjust the magnification rate.
Set a magnification rate at which u is
displayed.
3.0
•
Use the multi selector HIJKto scroll to the portion of the image that you
want to display.
Trim
3
4
Confirm the area that you want to
keep, and press the kbutton.
Save
Select Yes and press the k
button.
Save this image as
displayed?
•
An edited copy is created.
Yes
No
C Image Size
• The aspect ratio (horizontal and vertical ratio) of a cropped image is the same as
that of the original image.
• An image that is cropped to a size of 320 × 240 or smaller is displayed at a small
size on the playback screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Recording and Playing Back
Movies
1
Display the shooting screen.
40
30
20
10
0
•
Check the remaining amount of movie
recording time.
15m
-10
1010hPa
25
m
0s
880
Remaining movie
recording time
2
Press the b(emovie-record)
button to start movie recording.
•
The focus area for autofocus differs depending
•
Press the multi selector Kto pause
recording, and press Kagain to resume
recording (except when an HS movie
option is selected in Movie options).
Recording automatically ends if it remains
paused for about five minutes.
14
m30s
•
You can capture a still image by pressing
the shutter-release button while recording
3
4
Press the b(emovie-record) button again to end recording.
10s
Select a movie in full-frame
playback mode and press the k
button to play it back.
•
An image with a movie options icon is a
movie.
15m
1010hPa
0010. MOV
15 11 2015 15:30
/
/
Movie options
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Area Captured in Movies
•
The area that is captured in a movie varies depending on the Movie
options settings in the movie menu.
Movie frame+auto info, you can confirm the area that will be captured in
a movie before you start recording.
•
Maximum Movie Recording Time
Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even
when there is sufficient free space on the memory card for longer recording.
•
•
•
The remaining recording time for a single movie is displayed on the
shooting screen.
The actual remaining recording time may vary depending on the movie
content, subject movement, or type of memory card.
Memory cards with an SD Speed Class rating of 6 or faster are
unexpectedly when memory cards with a lower Speed Class rating are used.
B Notes About Camera Temperature
• The camera may become hot when shooting movies for an extended period of
time or when the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when recording movies, the
camera will automatically stop recording.
The amount of time remaining until the camera stops recording (B10s) is
displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
Notes About Movie Recording
B Notes About Saving Images or Movies
• The indicator showing the number of exposures remaining or the indicator
showing the remaining recording time flashes while images or movies are being
saved. Do not open the battery-chamber/memory card slot cover or
remove the battery or memory card while an indicator is flashing. Doing this
could result in loss of data, or in damage to the camera or the memory card.
• When using the camera's internal memory, recording movies may take some time.
• Depending on the file size of a movie, it may not be possible to record the movie in
the internal memory or copy it from a memory card to the internal memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
B Notes About Recorded Movies
• There may be some degradation in image quality when digital zoom is used.
• The sounds of zoom control operation, zoom, autofocus lens drive movement,
movie vibration reduction, and aperture operation when brightness changes may
be recorded.
• The following phenomena may be seen in the monitor while recording movies.
These phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-
vapor lighting.
- Subjects that move quickly from one side of the frame to the other, such as a
moving train or car, may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is
moved.
• Depending on the distance to the subject or the amount of zoom applied, colored
stripes may appear on subjects with repeating patterns (fabrics, lattice windows,
etc.) during movie recording and playback. This occurs when the pattern in the
subject and the layout of the image sensor interfere with each other; it is not a
malfunction.
B Notes About Vibration Reduction During Movie Recording
view (i.e., the area visible in the frame) becomes narrower during movie recording.
• When using a tripod to stabilize the camera during shooting, set Movie VR to Off
to prevent potential errors caused by this function.
B Notes About Autofocus for Movie Recording
1. Set AF area mode to Center and Autofocus mode to Single AF (default
setting) in the movie menu before starting movie recording.
2. Frame another subject (positioned at the same distance from the camera as the
intended subject) in the center of the frame, press the b(emovie-record)
button to start recording, and modify the composition.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Capturing Still Images While Recording
Movies
If the shutter-release button is pressed all the
way while recording a movie, one frame is saved
as a still image. Movie recording continues while
the still image is being saved.
•
While y is displayed in the monitor, still
images can be captured. While z is
displayed, still images cannot be captured.
The size of the captured image varies
depending on the Movie options setting
14
m30s
•
B Notes About Capturing Still Images During Movie Recording
• Still images cannot be captured during a movie recording in the following
situations:
- When movie recording is paused
- When the remaining movie recording time is less than 5 seconds
- When Movie options is set to Z 1080/60i, U 1080/50i, g 480/30p,
W 480/25p, or HS movie
• The frames of a movie that were recorded when a still image was being captured
may not play back smoothly.
• The sound of pressing the shutter-release button may be recorded in the movie.
• If the camera moves when the shutter-release button is pressed, the image may be
blurred.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Operations During Movie Playback
To adjust the volume, move the zoom control
Volume indicator
Playback controls are displayed in the monitor.
The operations described below can be
performed by using the multi selector JKto
select a control and then pressing the k
button.
When paused
Function
Rewind
Icon
A
B
Description
Hold down the kbutton to rewind the movie.
Advance
Hold down the kbutton to advance the movie.
Pause playback. The operations listed below can be
performed while paused.
Rewind the movie one frame. Hold down the k
button for continuous rewinding.
C
Advance the movie one frame. Hold down the k
button for continuous advancing.
D
Pause
E
G
F
I
Resume playback.
Extract the desired portion of a movie and save it as a
separate file.
Extract a single frame of a movie and save it as a still
image.
H
End
Return to full-frame playback mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Editing Movies
Extracting Only the Desired Portion of a Movie
The desired portion of a recorded movie can be saved as a separate file.
1
2
Play back a movie and pause at the start point of the
1
m30s
Use the multi selector JKto
select I in the playback controls,
and then press the kbutton.
Choose start point
3
4
5
Use HIto select M (choose start
point) in the editing controls.
•
•
Use JKto move the start point.
To cancel editing, select O (return), and
press the kbutton.
Choose end point
Use HIto select N (choose end
point).
•
Use JKto move the end point.
•
To preview the specified portion, select G
and then press the kbutton. Press the k
button again to stop previewing.
Save
Use HIto select m (save) and
press the kbutton.
•
Follow the instructions on the screen to
save the movie.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
B Notes About Movie Editing
• Use a sufficiently charged battery to prevent the camera from turning off during
editing. When the battery level indicator is B, movie editing is not possible.
• A movie that was created by editing cannot be trimmed again.
• The actual trimmed portion of a movie may differ slightly from the portion selected
using the start and end points.
• Movies cannot be trimmed so that they are less than two seconds long.
Saving a Frame from a Movie as a Still Image
The desired frame of a recorded movie can be extracted and saved as a still
image.
1
m30s
•
Pause a movie and display the frame to be
•
Use the multi selector JKto select the
H control and press the kbutton.
•
•
Select Yes when a confirmation dialog is
displayed, and press the kbutton to save the
image.
The image quality of the saved still image is
normal (compression ratio of approximately
1:8). The image size is determined by the type
For example, a still image saved from a movie
Copy this frame as a still image?
Yes
No
recorded with e 1080/30p (or S 1080/25p) is n (1920 × 1080
pixels).
B Notes About Saving Still Images
Frames of movies recorded with Z 1080/60i, U 1080/50i, g 480/30p,
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Using Menus
You can set the menus listed below by pressing the d(menu) button.
•
A Shooting menu
Available by pressing the dbutton when the shooting screen is
displayed.
Allows you to change image size and quality, continuous shooting settings,
etc.
•
•
•
G Playback menu
Available by pressing the dbutton when viewing images in full-frame
playback mode or thumbnail playback mode.
Allows you to edit images, play slide shows, etc.
D Movie menu
Available by pressing the dbutton when the shooting screen is
displayed.
Allows you to change movie recording settings.
J Wi-Fi options menu
Allows you to configure Wi-Fi settings for connecting the camera and a
smart device.
•
•
z Location data options menu
Allows you to adjust the options for the location data functions.
z Setup menu
Allows you to adjust basic camera functions such as date and time, display
language, etc.
1
2
Press the d(menu)
button.
40
30
20
•
The menu is displayed.
10
0
15m
-10
1010hPa
25
m
0s
880
Shooting menu
Image mode
Press the multi
selector J.
White balance
Continuous
•
The current menu icon is
displayed in yellow.
ISO sensitivity
AF area mode
Autofocus mode
Menu icons
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Set up
3
4
Select a menu icon
and press the k
button.
Time zone and date
Monitor settings
Date stamp
Photo VR
•
The menu options
become selectable.
AF assist
Digital zoom
Select a menu option
and press the k
button.
Time zone and date
Monitor settings
Date stamp
Photo VR
•
Certain menu options
cannot be set depending
on the current shooting
mode or the state of the
camera.
AF assist
Digital zoom
Date stamp
5
Select a setting and
press the kbutton.
•
The setting you selected is
applied.
When you are finished
using the menu, press the
dbutton.
Date
Date and time
Off
•
•
When a menu is displayed,
you can switch to shooting mode by pressing the shutter-release button, A
button, or b(e) button.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
The Shooting Menu (for A (Auto) Mode)
Image Mode (Image Size and Quality)
Enter shooting mode* Mdbutton MImage mode Mkbutton
*
This setting can also be changed in shooting modes other than auto. The changed
setting is also applied to other shooting modes.
Select the combination of image size and compression ratio to be used when
saving images.
The higher the image mode setting, the larger the size at which it can be
printed, and the lower the compression ratio, the higher the quality of the
images, but the number of images that can be saved is reduced.
Aspect ratio
(horizontal to
vertical)
Option*
Q 4608×3456P
Compression ratio
Approx. 1:4
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
4:3
4:3
4:3
4:3
4:3
4:3
16:9
1:1
P 4608×3456 (default setting)
R 3264×2448
r 2272×1704
q 1600×1200
O 640×480
l 4608×2592
s 3456×3456
*
The numerical values indicate the number of pixels that are captured.
Example: P 4608×3456 = approx. 16 megapixels, 4608 × 3456 pixels
Download from Www.Somanuals.com. All Manuals Search And Download.
80
B Notes About Printing Images at 1:1 Aspect Ratio
Change the printer setting to “Border” when printing images at a 1:1 aspect ratio.
Some printers may not be able to print images at a 1:1 aspect ratio.
B Notes About Image Mode
This function may not be available to use in combination with other functions
C Number of Images That Can Be Saved
• The approximate number of images that can be saved can be checked in the
• Note that due to JPEG compression, the number of images that can be saved may
vary greatly depending on the image content, even when using memory cards
with the same capacity and the same image mode setting. In addition, the number
of images that can be saved may vary depending on the make of the memory card.
• If the number of exposures remaining is 10,000 or more, the number of exposures
remaining display shows “9999”.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
White Balance (Adjusting Hue)
Enter shooting mode MA (shooting mode) button MA (auto) mode
Mkbutton Mdbutton MWhite balance Mkbutton
Adjust white balance to suit the light source or weather conditions in order to
make the colors in images match what you see with your eyes.
Option
a Auto
(default setting)
Description
White balance is automatically adjusted.
Use when the desired result is not achieved with Auto,
b Preset manual
c Daylight
d Incandescent
e Fluorescent
f Cloudy
Use under direct sunlight.
Use under incandescent lighting.
Use under fluorescent lighting.
Use under overcast skies.
Use with the flash.
g Flash
B Notes About White Balance
• Set the flash to W (off) when white balance is set to any setting other than Auto
• This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Using Preset Manual
Use the procedure below to measure the white balance value under the
lighting used during shooting.
1
2
Place a white or gray reference object under the lighting
that will be used during shooting.
Use the multi selector HIto
White balance
Auto
select Preset manual in the
Preset manual
White balance menu, and press
Daylight
the kbutton.
Incandescent
Fluorescent
•
The camera zooms in to the position for
measuring white balance.
Cloudy
Preset manual
3
4
Select Measure.
•
To apply the last measured value, select
Cancel and press the kbutton.
Cancel
Measure
Preset manual
Frame the white or gray reference
object in the measuring window,
and press the kbutton to
measure the value.
•
The shutter is released and measurement is
complete (no image is saved).
Cancel
Measure
Measuring window
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting
using the flash, set White balance to Auto or Flash.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Continuous Shooting
Enter shooting mode MA (shooting mode) button MA (auto) mode
Mkbutton Mdbutton MContinuous Mkbutton
Option
U Single
(default setting)
Description
One image is captured each time the shutter-release
button is pressed.
While the shutter-release button is held all the way down,
images are captured continuously.
k Continuous H
•
The frame rate for continuous shooting is about 7.0 fps
and the maximum number of continuous shots is about
5 (when image mode is set to P 4608×3456).
While the shutter-release button is held all the way down,
images are captured continuously.
m Continuous L
•
The frame rate for continuous shooting is about 2.2 fps
and the maximum number of continuous shots is about
10 (when image mode is set to P 4608×3456).
When the shutter-release button is pressed halfway, pre-
shooting cache shooting begins. When the shutter-release
button is pressed the rest of the way down, the camera
saves the current image as well as the images captured
function helps you to avoid missing the shot.
q Pre-shooting
cache
•
The frame rate for continuous shooting is about 15.1 fps
and the maximum number of continuous shots is 25,
including a maximum of 5 frames captured in the pre-
shooting cache.
•
Image mode is fixed at M (image size: 1280 × 960
pixels).
Each time the shutter-release button is pressed all the way,
images are captured at a high speed rate.
n Continuous H:
120 fps
•
The frame rate for continuous shooting is about 120 fps
and the maximum number of continuous shots is 50.
Image mode is fixed at O (image size: 640 × 480 pixels).
•
Each time the shutter-release button is pressed all the way,
images are captured at a high speed rate.
j Continuous H:
60 fps
•
The frame rate for continuous shooting is about 60 fps
and the maximum number of continuous shots is 25.
Image mode is fixed at M (image size: 1280 × 960
pixels).
•
Download from Www.Somanuals.com. All Manuals Search And Download.
84
B Notes About Continuous Shooting
• Focus, exposure, and white balance are fixed at the values determined with the
first image in each series.
• It may take some time to save the images after shooting.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate for continuous shooting may vary depending on the current image
mode setting, the memory card used, or shooting condition.
• When using Pre-shooting cache, Continuous H: 120 fps, or Continuous H:
60 fps, banding or variance in brightness or hue may occur in images that were
captured under lighting that flickers at high speeds, such as fluorescent, mercury-
vapor, or sodium-vapor lighting.
• This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
85
C Pre-shooting Cache
When the shutter-release button is pressed halfway or all the way down, images are
saved as described below.
Press down halfway
Press down all the way
Images saved before pressing all
the way
Images saved by pressing all
the way
• The pre-shooting cache icon (Q) on the shooting screen changes to green while
the shutter-release button is pressed halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
ISO Sensitivity
Enter shooting mode MA (shooting mode) button MA (auto) mode
Mkbutton Mdbutton MISO sensitivity Mkbutton
A higher ISO sensitivity allows darker subjects to be captured. Additionally,
even with subjects of similar brightness, pictures can be taken at faster shutter
speeds, and blurring caused by camera shake and subject movement can be
reduced.
•
When a higher ISO sensitivity is set, images may contain noise.
Option
a Auto
(default setting)
Description
Sensitivity is automatically selected from the range of
ISO 125 to 1600.
Select the range in which the camera automatically
adjusts ISO sensitivity, from ISO 125-400 or ISO 125-
800.
I Fixed range auto
125, 200, 400, 800, 1600,
3200, 6400
Sensitivity is locked at the specified value.
B Notes About ISO Sensitivity
This function may not be available to use in combination with other functions
C ISO Sensitivity Display on the Shooting Screen
•
•
When Auto is selected, E is displayed when the ISO sensitivity increases.
When Fixed range auto is selected, the maximum value for ISO sensitivity
is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
87
AF Area Mode
Enter shooting mode MA (shooting mode) button MA (auto) mode
Mkbutton Mdbutton MAF area mode Mkbutton
Use this option to determine how the camera selects the focus area for
autofocus when shooting still images.
Option
Description
When the camera detects
40
30
20
10
0
a human face, it focuses
on that face.
more information.
15m
-10
1010hPa
25
m
0s
880
Focus area
a Face priority
When framing a
composition with no
human subjects or
detected faces, the
camera automatically
selects one or more of the
nine focus areas
containing the subject
closest to the camera
when the shutter-release
button is pressed halfway.
1/250
F2.8
Focus areas
Use the multi selector
HIJKto move the
focus area to where you
want to focus.
Scope of movable
focus area
•
To use the multi
selector to configure
the flash mode or other
settings, press the k
button. To return to
moving the focus area,
press the kbutton
again.
x Manual
Focus area
Download from Www.Somanuals.com. All Manuals Search And Download.
88
Option
Description
The camera focuses on
the subject in the center
of the frame.
40
30
20
10
0
15m
y Center
-10
1010hPa
25
m
0s
880
Focus area
Use this function to take
pictures of moving
40
30
subjects. Register the
subject on which the
camera focuses. The focus
area automatically moves
to track the subject. See
20
10
0
s Subject
tracking
-10
Start
880
information.
When the camera detects
the main subject, it
focuses on that subject.
information.
40
30
20
10
0
M Target finding
AF (default setting)
15m
-10
1010hPa
25
m
0s
880
Focus areas
B Notes About AF Area Mode
• When digital zoom is in effect, the camera focuses in the center of the frame
regardless of the AF area mode setting.
• This function may not be available to use in combination with other functions
C AF Area Mode for Movie Recording
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Using Subject Tracking
Enter shooting mode MA (shooting mode) button MA (auto) mode
Mkbutton Mdbutton MAF area mode Mkbutton M
s Subject tracking Mkbutton Mdbutton
1
Register a subject.
•
•
•
Align the subject that you want to track
with the border in the center of the monitor
and press the kbutton.
When the subject is registered, a yellow
border (focus area) is displayed around it
and the camera begins tracking the subject.
If the subject cannot be registered, the
border is displayed in red. Change the
composition and try registering the subject
again.
40
30
20
10
0
-10
Start
•
•
To cancel subject registration, press the kbutton.
If the camera can no longer track the registered subject, the focus area
disappears. Register the subject again.
2
Press the shutter-release button
fully to take the picture.
•
If the shutter-release button is pressed
while the focus area is not displayed, the
camera focuses on the subject in the center
of the frame.
1/250
F2.8
B Notes About Subject Tracking
• If you perform operations such as zooming while the camera is tracking the
subject, the registration is canceled.
• Subject tracking may not be possible in certain shooting conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Autofocus Mode
Enter shooting mode MA (shooting mode) button MA (auto) mode
Mkbutton Mdbutton MAutofocus mode Mkbutton
Set how the camera focuses when shooting still images.
Option
Description
The camera focuses only when the shutter-release
button is pressed halfway.
A Single AF
The camera continues focusing even when the
shutter-release button is not pressed halfway. The
sound of lens drive movement is heard while the
camera focuses.
B Full-time AF
Even when the shutter-release button is not pressed
halfway, the camera focuses automatically if the
composition of the framed image is significantly
changed.
a Pre-focus
(default setting)
C Autofocus Mode for Movie Recording
the movie menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
The Smart Portrait Menu
•
Image mode.
Self-Collage
Enter shooting mode MA (shooting mode) button MF Smart portrait
mode Mkbutton Mdbutton MSelf-Collage Mkbutton
Option
Description
Set the number of shots that the camera
automatically captures (number of captured
images for an aggregated image).
Number of shots
•
4 (default setting) or 9 can be selected.
Set the interval time between each shot.
Interval
•
Short, Medium (default setting), or Long can
be selected.
Set whether to activate the shutter sound when
shooting with the self-collage function.
•
Standard, SLR, Magic (default setting), or Off
Shutter sound
can be selected.
•
The same setting that is specified for Shutter
sound in Sound settings in the setup menu
is not applied to this setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Blink Proof
Enter shooting mode MA (shooting mode) button MF Smart portrait
mode Mkbutton Mdbutton MBlink proof Mkbutton
Option
Description
The camera automatically
releases the shutter twice
with every shot and saves
one image in which the
subject’s eyes are open.
A blink was detected in the
picture just taken.
y On
•
If the camera saved an
image in which the
subject’s eyes may
have been closed, the
dialog shown on the right is displayed for a few seconds.
•
The flash cannot be used.
Off (default setting) Turns the blink proof off.
B Notes About Blink Proof
This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
93
The Playback Menu
•
editing functions.
Mark for Wi-Fi Upload
Press the cbutton (playback mode) Mdbutton MMark for Wi-Fi
upload Mkbutton
Select images in the camera that you want to transfer to a smart device in
advance before transferring them.
for Wi-Fi upload function.
upload settings that you made are canceled.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Slide Show
Press the cbutton (playback mode) Mdbutton MSlide show Mk
button
Play back images one by one in an automated “slide show.” When movie files
are played back in the slide show, only the first frame of each movie is
displayed.
Slide show
1
2
Use the multi selector HIto
select Start and press the k
button.
Start
Frame intvl
Loop
•
The slide show begins.
•
To change the interval between images,
select Frame intvl, press the kbutton,
and specify the desired interval time before
selecting Start.
Pause
•
•
To repeat the slide show automatically, select Loop and press the kbutton
before selecting Start.
The maximum playback time is up to about 30 minutes even if Loop is
enabled.
End or restart the slide show.
•
The screen shown on the right is displayed
after the slide show ends or is paused. To
exit the show, select G and then press the
kbutton. To resume the slide show, select
F and then press the kbutton.
Operations During Playback
•
Use the multi selector JKto display the previous/next image. Press and
hold to rewind/fast forward.
•
Press the kbutton to pause or end the slide show.
Download from Www.Somanuals.com. All Manuals Search And Download.
95
Protect
Press the cbutton (playback mode) Mdbutton MProtect Mk
button
The camera protects selected images from accidental deletion.
Select images to protect or cancel protection from the image selection screen
Note that formatting the memory card or the camera’s internal memory
Rotate Image
Press the cbutton (playback mode) Mdbutton MRotate image M
kbutton
Specify the orientation in which saved images are displayed during playback.
Still images can be rotated 90 degrees clockwise or 90 degrees
counterclockwise.
image screen is displayed, press the multi selector JKto rotate the image 90
degrees.
Rotate image
Rotate image
Rotate image
Back
Rotate
Back
Rotate
Back
Rotate
Rotate90 degrees
counterclockwise
Rotate 90 degrees
clockwise
Press the kbutton to finalize display orientation, and save orientation
information with the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Copy (Copy Between the Memory Card and
Internal Memory)
Press the cbutton (playback mode) Mdbutton MCopy Mk
button
Images can be copied between a memory card and the internal memory.
•
When a memory card that contains no images is inserted and the camera is
switched to playback mode, Memory contains no images. is displayed. In
that case, press the dbutton to select Copy.
Copy
1
Use the multi selector HIto
select a destination option to
which images are copied and
press the kbutton.
Camera to card
Card to camera
Camera to card
2
Select a copy option and press the
kbutton.
•
When you choose Selected images, use the
image selection screen to specify images
Selected images
All images
•
When you choose the Card to camera
option, All images is not available.
B Notes About Copying Images
• Only files in formats that this camera can record can be copied.
• Operation is not guaranteed with images captured with another make of camera
or that have been modified on a computer.
C Copying Images in a Sequence
• If you select a key picture of a sequence in Selected images, all images in the
sequence are copied.
• If you press the dbutton while images in a sequence are displayed, only the
Card to camera copy option is available. All images in the sequence are copied if
you select Current sequence.
Download from Www.Somanuals.com. All Manuals Search And Download.
97
Sequence Display Options
Press the cbutton (playback mode) Mdbutton MSequence display
options Mkbutton
Option
Description
Displays each image in a sequence individually.
F is displayed on the playback screen.
Q Individual pictures
C Key picture only
(default setting)
Displays only the key picture for images in a
sequence.
Settings are applied to all sequences, and the setting is saved in the camera’s
memory even if the camera is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
The Image Selection Screen
When an image selection screen such as the
one shown on the right is displayed while
operating the camera, follow the procedures
described below to select the images.
Protect
Back
Protect
1
2
3
Use the multi selector JKto
select an image.
•
to switch to full-frame playback or f(h)
to switch to thumbnail playback.
•
Only one image can be selected for Rotate
image. Proceed to step 3.
Back
Protect
Use HIto select or deselect (or
to specify the number of copies).
•
When an image is selected, an icon is
displayed below the image. Repeat steps 1
and 2 to select additional images.
Back
Press the kbutton to apply image selection.
When a confirmation dialog is displayed, follow the on-screen instructions to
operate.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
99
The Movie Menu
Movie Options
Enter shooting mode Mdbutton MD menu icon MMovie options
Mkbutton
Select the desired movie option to record. Select normal speed movie options
fast motion. The movie options that can be selected vary depending on the
•
Memory cards with an SD Speed Class rating of 6 or faster are
Normal Speed Movie Options
Option
(Image size/Frame
rate*, File format)
Aspect ratio (horizontal to
vertical)
Image size
e 1080/30p
S 1080/25p
(default setting)
1920 × 1080
16:9
Z 1080/60i
U 1080/50i
1920 × 1080
1280 × 720
640 × 480
16:9
16:9
4:3
f 720/30p
V 720/25p
g 480/30p
W 480/25p
*
Interlaced format uses Fields per second.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
HS Movie Options
Recorded movies are played back in fast or slow motion.
Image size
Aspect ratio
Option
Description
(horizontal to vertical)
1/4-speed slow motion movies
h
a
640 × 480
4:3
•
Max. recording time*: 15
seconds (playback time: 1
minute)
HS 480/4×
2× speed fast motion movies
j
Y
1920 × 1080
16:9
•
Max. recording time*: 2
minutes (playback time: 1
minute)
HS 1080/0.5×
*
While recording movies, the camera can be switched between normal speed
movie recording and slow motion or fast motion movie recording.
The maximum recording time shown here refers only to the portion of the movie
that is recorded in slow motion or fast motion.
B Notes About HS Movie
• Sound is not recorded.
• Zoom position, focus, exposure, and white balance are locked when movie
recording starts.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
C Playing Back in Slow Motion and Fast Motion
When recording at normal speed:
Recording
10 s
time
Playback
10 s
time
When recording at h HS 480/4× (a HS 480/4×):
Movies are recorded at 4× normal speed.
They are played back in slow motion at 4× slower speed.
Recording
10 s
time
Playback
time
40 s
Slow motion playback
When recording at j HS 1080/0.5× (Y HS 1080/0.5×):
Movies are recorded at 1/2 normal speed.
They are played back in fast motion at 2× faster speed.
Recording
10 s
time
Playback
5 s
time
Fast motion playback
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Recording Movies in Slow Motion and Fast Motion (HS
Movie)
Enter shooting mode Mdbutton MD menu icon MMovie options
Mkbutton
Movies recorded using HS movie can be played back in slow motion at 1/4 of
the normal playback speed, or in fast motion at twice the normal playback
speed.
Movie options
1
Use the multi selector HIto
select an HS movie option
1080/30
p
1080/60
i
720/30
480/30
p
p
•
After applying the option, press the d
button to return to the shooting screen.
HS 480/4
×
HS 1080/0.5
×
2
Press the b(emovie-record)
button to start recording.
•
The camera starts recording an HS movie.
•
The camera switches between normal
speed movie recording and HS movie
recording each time the kbutton is
pressed.
5s
•
•
The movie options icon changes when
switching between HS movie recording
and normal speed movie recording.
camera automatically switches to normal speed movie recording.
3
Press the b(emovie-record) button to end recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
AF Area Mode
Enter shooting mode Mdbutton MD menu icon MAF area mode M
kbutton
Use this option to determine how the camera selects the focus area for
autofocus during movie recording.
Option
Description
When the camera detects a human face, it focuses on
When Autofocus mode in the movie menu is set to
Single AF, the camera focuses on the subject in the
center of the frame even if Face priority is selected.
a Face priority
(default setting)
The camera focuses on the subject in the center of the
frame.
y Center
•
•
When an HS movie option is selected in Movie options, the setting is fixed
at Center.
When Movie VR is set to On (hybrid) and Movie options is set to Z
1080/60i or U 1080/50i, the setting is fixed at Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Autofocus Mode
Enter shooting mode Mdbutton MD menu icon MAutofocus mode
Mkbutton
Set how the camera focuses in movie mode.
Option
Description
Focus is locked when movie recording starts.
Select this option when the distance between the
camera and subject will remain fairly consistent
during movie recording.
A Single AF
(default setting)
The camera focuses continuously during movie
recording.
Select this option when the distance between the
camera and subject will change significantly during
recording. The sound of the camera focusing may be
heard in the recorded movie. Use of Single AF is
recommended to prevent the sound of the camera
focusing from interfering with recording.
B Full-time AF
•
When an HS movie option is selected in Movie options, the setting is fixed
at Single AF.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Movie VR
Enter shooting mode Mdbutton MD menu icon MMovie VR M
kbutton
Select the vibration reduction setting used when recording movies.
Select Off when using a tripod to stabilize the camera during shooting.
Option
Description
Performs optical compensation for camera shake
using lens shift VR and simultaneously performs
electronic VR using image processing. The angle of
view (i.e., the area visible in the frame) becomes
narrower.
V On (hybrid)
(default setting)
Performs compensation for camera shake using lens
shift VR.
g On
Off
Compensation is not performed.
B Notes About Movie VR
• The effects of camera shake may not be completely eliminated in some situations.
• Only lens shift VR is used to compensate for camera shake when Movie options is
set to HS movies, even if Movie VR is set to On (hybrid).
Movie Light
Enter shooting mode Mdbutton MD menu icon MMovie light M
kbutton
Enable or disable the movie light that assists recording in dark places during
movie recording.
Option
Description
The movie light is turned on for lighting when movies are
recorded.
On
Off
The movie light is turned off.
(default setting)
Download from Www.Somanuals.com. All Manuals Search And Download.
106
Wind Noise Reduction
Enter shooting mode Mdbutton MD menu icon MWind noise
reduction Mkbutton
Option
Description
Reduces the sound that is produced when wind
passes over the microphone during movie recording.
Other sounds may become difficult to hear during
playback.
Y On
Off (default setting)
Wind noise reduction is disabled.
•
When an HS movie option is selected in Movie options, the setting is fixed
at Off.
Frame Rate
Enter shooting mode Mdbutton MD menu icon MFrame rate M
kbutton
Select the frame rate (fields per second for the interlaced format) used when
recording movies. When the frame rate setting is switched, options that can be
Option
30 fps (30p/60i)
25 fps (25p/50i)
Description
Suited for playback on a TV using the NTSC standard.
Suited for playback on a TV using the PAL standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
107
The Wi-Fi Options Menu
Press the dbutton MJ menu icon Mkbutton
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart
device.
Option
Description
Connect to Select when wirelessly connecting the camera and a smart device.
smart
device
information.
Select when wirelessly connecting the camera and a smart device.
information.
Upload
from
camera
•
The images to transfer can be selected on the image selection
and password of the camera are displayed on the screen after
images are selected.
Select to terminate the wireless connection between the camera
and a smart device. See “Using the Wi-Fi (Wireless LAN) Function”
Disable
Wi-Fi
SSID: Change the SSID. The SSID configured here is displayed on
the smart device. Set a 1- to 24-character alphanumeric SSID.
Auth./encryp.: Select whether or not to encrypt the
communications between the camera and the connected smart
device. Communications are not encrypted when Open (default
setting) is selected.
Password: Set the password. Set an 8- to 16-character
alphanumeric password.
Options
Channel: Select the channel used for wireless connections.
Subnet mask:
Use the default setting (255.255.255.0) under normal conditions.
DHCP server IP address:
Use the default setting (192.168.0.10) under normal conditions.
Current
settings
Display the current settings.
Restore
default
settings
Restore the Wi-Fi settings to their default values.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
Operating the Text Input Keyboard
Character Input for SSID and Password
•
Use the multi selector HIJKto select
alphanumeric characters. Press the kbutton
to enter the selected character in the text
field and move the cursor to the next space.
To move the cursor in the text field, select N
or O on the keyboard, and press the k
button.
Text field
SSID
•
•
•
To delete one character, press the lbutton.
To apply the setting, select P on the
keyboard and press the kbutton.
Back
Delete
Keyboard
Character Input for Channel, Subnet Mask, and DHCP Server IP Address
•
Use the multi selector HIto set the
numbers. To move to the next digit, press K
or the kbutton. To return to the previous
digit, press J.
DHCP server IP address
1
9
2
.
1
6
8
.
0
.
1
0
•
To apply the setting, select the last digit and
press the kbutton.
Edit
Download from Www.Somanuals.com. All Manuals Search And Download.
109
The Location Data Options Menu
Display the location data options menu directly by pressing the dbutton
•
while a map is displayed.
Location Data Options
Press the dbutton Mz (location data options) menu icon MLocation
data options Mkbutton
Option
Description
When set to On, signals are received from the positioning
Default setting: Off
•
A memory card is used to update the A-GPS (assist GPS)
file. Using the latest A-GPS file can shorten the time
needed for calculating the location data.
Update A-GPS file
•
information.
The location data and POI information recorded on
images are erased. Before pressing the dbutton, select
the images with the location data or POI information that
you want to delete.
Erase location data
•
The deleted location data or POI information cannot be
recovered.
•
The location data of images captured with cameras
other than this camera cannot be erased.
Updating the A-GPS File
Download the latest A-GPS file from the website below, and use it to update
the file.
http://nikonimglib.com/agps3/
•
The A-GPS file for the COOLPIX AW130 is only available from the website
above.
1
Download the latest A-GPS file to the computer from the
website.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
2
3
Use a card reader or other device to copy the downloaded
file to the “NCFL” folder of the memory card.
•
The “NCFL” folder is located directly under the memory card root directory. If
the memory card does not have “NCFL” folder, create a new folder.
Insert the memory card containing the copied file into the
camera.
4
5
Turn on the camera.
Press the dbutton to display the location data options
menu, and use the multi selector to select Location data
options.
6
Select Update A-GPS file, and update the file.
•
About two minutes are needed to update the A-GPS file.
B Notes About Updating A-GPS File
• The A-GPS file is disabled when a position is determined for the first time after the
camera is purchased. The A-GPS file becomes active from the second operation for
determining a location.
• The validity period of the A-GPS file can be checked on the update screen. If the
validity period has expired, it is displayed in gray.
• Once the validity period of the A-GPS file has expired, calculating the location data
will not become faster. Updating of the A-GPS file before using the location data
functions is recommended.
Distance Units
Press the dbutton Mz (location data options) menu icon MDistance
units Mkbutton
The distance units of the map display can be selected from km (m) (kilometers,
meters) (default setting) or mi (yd) (miles, yards).
Download from Www.Somanuals.com. All Manuals Search And Download.
111
Calculate Distance
button Mz (location data options) menu icon MCalculate distance M
kbutton
Calculate the linear distance from the current position to the shooting location
of the image or between the shooting locations of two images.
Calculate distance
1
2
3
Use the multi selector HIto
select the desired option for
calculating the distance, and press
the kbutton.
When Position nowimage is selected,
the camera starts calculating the current
position. Proceed to step 3.
Position now⇔image
Image⇔image
•
Use JKto select the image that is
the start point, and press the k
button.
•
To adjust the scale of the map, use the
zoom control (f(h)/g(i)).
Choose start point
Back
Select image
Press JKto select the image that
is the end point.
•
•
Each time an image is selected, the
distance is displayed on the screen.
To end distance calculation, press the k
button.
Choose end point
Back
Select mage
Distance
B Notes About Distance Calculation
• If the location data is not recorded on the image, the distance cannot be
calculated.
• In order to calculate the distance using Position nowimage, the current
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Points of Interest (POI) (Recording and Displaying
Location Name Information)
Press the dbutton Mz (location data options) menu icon MPoints
of interest (POI) Mkbutton
Configure the POI (Points of Interest, location name information) settings.
Option
Description
Set whether or not to record the location name
information on the images to be shot.
Embed POI
•
Default setting: Off
The location name information can be recorded on
both still images and movies.
•
Set whether or not to display the location name
information on the shooting screen or playback screen
Display POI
•
If Embed POI was set to On when an image was taken,
the location name information for the image is
displayed on the playback screen.
•
Default setting: Off
Set the display level of the location name information. A
higher display level shows more detailed regional
information.
•
•
When set to level 1: country names are displayed.
When set to levels 2 to 5: the information displayed
varies depending on the country.
Level of detail
•
When set to level 6: landmark names (facilities) are
displayed.
Before pressing the dbutton, select the image to
change the location name information.
•
Update POI: The location name information recorded
on the image can be changed.
-
When level 6 is selected, press the multi selector JK
to change the landmark name.
Edit POI
-
To change the POI information level, press the multi
selector HI.
•
Remove POI: The location name information recorded
on the image is deleted.
C POI Display
If there is no location name information at the set display level, the location name
information may not be displayed or “---” may be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
113
Create Log
Press the dbutton Mz (location data options) menu icon MCreate
log Mkbutton
Option
Description
The camera records location, altitude, and water depth
logs.
•
Select an interval and time duration that the camera
uses for log recording. The default setting is 15 s for
interval and Log data for next 24 hrs for time
duration.
Start all logs*
The camera records a location log.
•
Select an interval and time duration that the camera
uses for log recording. The default setting is 15 s for
interval and Log data for next 24 hrs for time
duration.
Start location log*
Start depth log*
The camera records a water depth log.
•
Select an interval that the camera uses for log
recording. The default setting is 1 min for interval, and
time duration is fixed to one hour.
*
Cannot be selected if there is a log that has not been saved. Select End all logs,
End location log, or End depth log, and save or delete the log.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
View Log
Press the dbutton Mz (location data options) menu icon MView log
Mkbutton
Check or erase the log data stored on the memory card using Create log
Option
Description
Select a log (date) that you want to display and press the
Location logs
•
Press the l(delete) button to delete the selected log or
all saved location logs.
Select a log (date) that you want to display and press the
kbutton to display the altitude or water depth data as a
Press the l(delete) button to delete the selected log or
all saved altitude/depth logs.
•
Set Clock from Satellite
Press the dbutton Mz (location data options) menu icon MSet clock
from satellite Mkbutton
Signals from the positioning satellites are used to set the date and time of the
camera’s internal clock. Check the positioning status before setting the clock
using this option.
B Notes About Set Clock from Satellite
• To set the camera's internal clock, positioning must have been done successfully
• Date/time adjustment by Set clock from satellite is set according to the time
before setting Set clock from satellite.
• The date/time set using Set clock from satellite is not as accurate as radio clocks.
Use Time zone and date in the setup menu to set the time if it is not accurate in
Set clock from satellite.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Electronic Compass
Press the dbutton Mz (location data options) menu icon M
Electronic compass Mkbutton
Option
Description
Set whether or not to display a compass on the shooting
screen.
•
•
Default setting: Off
The direction the camera is pointing is displayed based
on measured direction information.
When the camera lens faces downward, the compass
display switches to a circle compass with a red arrow
that points north.
•
•
Compass display
-
-
Display style: north, east, south, and west
Display range: 16 cardinal points
The direction measured by the electronic compass can
be imprinted on images using Data imprint in the
Correct the compass when the compass direction is not
displayed correctly.
When the screen shown
on the right is displayed,
swing the camera to draw
a figure eight in the air
while turning your wrist
to face the camera
Compass correction
Move camera in a figure eight.
forward and backward,
side to side, or up and
down.
Compass correction
Download from Www.Somanuals.com. All Manuals Search And Download.
116
B Notes About Using the Electronic Compass
• The electronic compass is not displayed when the camera lens is facing upwards.
• Do not use the electronic compass in this camera for mountain climbing and other
specialized applications. The displayed information is intended as a general guide
only.
• Direction may not be measured correctly near the following objects:
magnets, metals, electrical motors, electrical home appliances or electrical power
cables.
• Direction may not be measured correctly in the following places:
in automobiles, trains, ships, airplanes, inside buildings or in underground malls
• Direction may not be measured correctly if the location data cannot be calculated.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
Altitude/depth Options
Press the dbutton Mz (location data options) menu icon M
Altitude/depth options Mkbutton
Option
Description
Set whether or not to display the altimeter or depth gauge
on the shooting screen.
Altimeter/depth
gauge
•
Default setting: On
The altitude or water depth value is compensated.
•
•
•
Use location data: The altitude is compensated using
the record location data function.
-
When the confirmation dialog is displayed, select
Yes and press the kbutton. The altitude is
compensated using the displayed value.
The data is not compensated underwater.
-
Correct manually: Enter the altitude or water depth to
compensate the data.
Alt./depth correction
-
Use the multi selector HIto change the value and
use JKto change the input position of the digits.
When the cursor is positioned on the rightmost digit,
press the kbutton to set this value.
-
Reset: The compensation set using Use location data
or Correct manually is canceled.
-
When the compensation cancellation dialog is
displayed, select Yes and press the kbutton. The
compensated value is canceled.
Set the unit of distance for displaying altitude or water
depth to m (meters) (default setting) or ft (feet).
Altitude/depth units
B Notes About Altitude/Depth Options
• To correct the altitude or water depth using Use location data of Alt./depth
correction, Record location data in Location data options in the location data
options menu must be set to On, and also positioning must have been performed
• When Altimeter/depth gauge is set to On, the altimeter or depth gauge, altitude
or water depth, and the atmospheric pressure are displayed even if Hide info is
Download from Www.Somanuals.com. All Manuals Search And Download.
118
The Setup Menu
Time Zone and Date
Press the dbutton Mz menu icon MTime zone and date Mk
button
Set the camera clock.
Option
Description
•
•
•
Select a field: Press the
multi selector JK.
Edit the date and time:
Press HI.
Apply the setting: Select
the minute setting and
press the kbutton.
Date and time
D
M
Y
h
m
Date and time
15 11
2015
15 10
Edit
Select Year/Month/Day, Month/Day/Year, or Day/Month/
Date format
Time zone
Year.
Set time zone and daylight saving time.
•
When Travel destination (x) is set after having set the
home time zone (w), the time difference between the
travel destination and the home time zone is automatically
calculated, and the date and time are saved for the selected
region.
Setting the Time Zone
1
Use the multi selector HIto
select Time zone and press the k
button.
Time zone and date
Date and time
Date format
Time zone
1 5 / 1 1 / 2 0 1 5 1 5 :3 0
Download from Www.Somanuals.com. All Manuals Search And Download.
119
2
3
4
Select w Home time zone or x
Travel destination and press the
kbutton.
Time zone
Home time zone
Travel destination
•
The date and time displayed in the monitor
changes depending on whether the home
time zone or travel destination is selected.
1 5 / 1 1 / 2 0 1 5 1 5
Time zone
:3 0
Press K.
Home time zone
Travel destination
1 5 / 1 1 / 2 0 1 5 1 5 :3 0
Use JKto select the time zone.
•
Press Hto enable daylight saving time
function, and W is displayed. Press Ito
disable the daylight saving time function.
10
:30
•
•
Press the kbutton to apply the time zone.
If the correct time is not displayed for the
home or travel destination time zone
setting, set the appropriate time in Date
and time.
Back
Download from Www.Somanuals.com. All Manuals Search And Download.
120
Monitor Settings
Press the dbutton Mz menu icon MMonitor settings Mkbutton
Option
Photo info
Description
Set whether or not to display information in the monitor.
Set whether or not to display the captured image immediately
after shooting.
Image review
•
Default setting: On
Adjust the brightness.
Brightness
•
Default setting: 3
Photo Info
Shooting mode
Playback mode
4
/
4
40
30
20
10
Show info
Auto info
0
15m
15m
-10
1010hPa
1010hPa
25
m
0s
0004. JPG
15 11 2015 15:30
880
/
/
The same information as shown in Show info is displayed,
and it is hidden as shown in Hide info if no operations are
(default setting) performed for a few seconds. The information is displayed
again when an operation is performed.
40
30
20
10
Hide info
0
15m
-10
1010hPa
Download from Www.Somanuals.com. All Manuals Search And Download.
121
Shooting mode
Playback mode
4 / 4
40
30
20
10
0
15m
15m
-10
1010hPa
1010hPa
25
m
0s
0004. JPG
15 11 2015 15:30
880
/
/
Framing
grid+auto info
In addition to the information Same as Auto info.
shown in Auto info, a
framing grid is displayed to
help frame pictures.
The framing grid is not
displayed while recording
movies.
4 / 4
40
30
20
10
0
15m
15m
-10
1010hPa
1010hPa
25
m
0s
0004. JPG
15 11 2015 15:30
880
/
/
In addition to the information Same as Auto info.
shown in Auto info, a frame
is displayed before movie
recording begins that
Movie
frame+auto info
represents the area that will
be captured when recording
movies.
The movie frame is not
displayed while recording
movies.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Date Stamp
Press the dbutton Mz menu icon MDate stamp Mkbutton
The shooting date and time can be stamped on
images when shooting. The information can be
printed even when using a printer that does not
support the date imprinting function.
15.11.2015
Option
f Date
Description
Date is stamped on images.
S Date and time
Date and time are stamped on images.
Off (default setting)
Date and time are not stamped on images.
B Notes About Date Stamp
• Stamped dates form a permanent part of image data and cannot be deleted. The
date and time cannot be stamped on images after they have been captured.
• The date and time cannot be stamped in the following situations:
- When using Sports, Night portrait (when Hand-held is selected), Night
landscape (when Hand-held is selected), Backlighting (when HDR is set),
Easy panorama, or Pet portrait (when Continuous is selected) scene mode
Single
- When shooting movies
- When saving still images during moving recording
• The stamped date and time may be difficult to read when using a small image size.
C Printing a Shooting Date on Images Without a Date Stamp
imprint the shooting date on the images when they are printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
123
Photo VR
Press the dbutton Mz menu icon MPhoto VR Mkbutton
Select the vibration reduction setting used when shooting still images.
Select Off when using a tripod to stabilize the camera during shooting.
Option
Description
Performs optical compensation for camera shake
using the lens shift method. Under the following
conditions, also performs electronic VR using image
processing.
•
•
Flash: Does not fire
Shutter speed: Slower than 1/30 second at the
maximum wide-angle position and 1/60 second at
the maximum telephoto position
Self-timer: OFF
Continuous setting: Single
ISO sensitivity: ISO 200 or lower
V On (hybrid)
•
•
•
The image recording time may be longer than usual.
Compensation for camera shake is performed using
lens shift VR.
g On (default setting)
Off
Compensation is not performed.
B Notes About Photo VR
• After turning on the camera or after switching from playback mode to shooting
mode, wait for the shooting mode screen to be displayed completely before
taking pictures.
• Images in the camera monitor may be displayed blurry immediately after shooting.
• The effects of camera shake may not be completely eliminated in some situations.
• When the shutter speed is extremely slow, images cannot be compensated using
image processing even when On (hybrid) is set.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
AF Assist
Press the dbutton Mz menu icon MAF assist Mkbutton
Option
Description
The AF-assist illuminator automatically lights up when
you press the shutter-release button under dim
lighting. The illuminator has a range of about 3.0 m (9
ft 10 in.) at the maximum wide-angle position and
about 3.0 m (9 ft 10 in.) at the maximum telephoto
position.
a Auto
(default setting)
•
Note that for some shooting modes or focus areas,
the AF-assist illuminator may not light.
Off
The AF-assist illuminator does not light.
Digital Zoom
Press the dbutton Mz menu icon MDigital zoom Mkbutton
Option
On (default setting)
Off
Description
Digital zoom is enabled.
Digital zoom is disabled.
B Notes About Digital Zoom
• Digital zoom cannot be used in the following shooting modes:
-
Portrait, Night portrait, Night landscape, Backlighting (when HDR is set),
Easy panorama, Pet portrait, or Underwater scene mode
- Smart portrait mode
• Digital zoom cannot be used in other shooting modes when using certain settings
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Sound Settings
Press the dbutton Mz menu icon MSound settings Mkbutton
Option
Description
When On (default setting) is selected, the camera
produces one beep when operations are performed,
two beeps when focus is acquired on the subject, and
three beeps when an error occurs. The start-up sound
is also produced.
Button sound
•
Sounds are disabled when using Pet portrait
scene mode.
When On (default setting) is selected, the shutter
sound is produced when the shutter is released.
Shutter sound
•
The shutter sound is not produced when using
continuous shooting mode, when recording
movies, or when using Pet portrait scene mode.
Underwater Flash
Press the dbutton Mz menu icon MUnderwater flash Mkbutton
Select On when shooting underwater using an SB-N10 underwater speedlight
B Notes About Underwater Flash
This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
126
Action Control Response
Press the dbutton Mz menu icon MAction control response Mk
button
Set the sensitivity of the operation performed when shaking the camera (action
even if the camera shake movement is small. When this option is set to Low,
the operation is performed if the camera shake movement is large. The default
setting is Medium.
B Notes About Action Control Response
When viewing images with Quick playback of action control or in full-frame
playback mode, operation response of selecting images is fixed.
Playback Action Control
Press the dbutton Mz menu icon MPlayback action control Mk
button
Option
On (default setting)
Off
Description
An image can be selected by shaking the camera in full-
frame playback mode.
The image cannot be selected by shaking the camera.
B Notes About Playback Action Control
When Playback action control is set to On, the displayed images are not rotated
automatically even if the orientation of the camera is changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
127
Map Actions
Press the dbutton Mz menu icon MMap actions Mkbutton
Option
Description
You can zoom in and out of maps by shaking the camera
On (default setting)
You cannot zoom in and out of maps by shaking the
camera.
Off
B Notes About Map Actions
If the V (action) button is pressed, you can zoom in and out of maps only by using
Auto Off
Press the dbutton Mz menu icon MAuto off Mkbutton
Set the amount of time that elapses before the camera enters standby mode
You can select 30 s, 1 min (default setting), 5 min, or 30 min.
C Setting the Auto Off Function
The time that passes before the camera enters standby mode is fixed in the following
situations:
• When a menu is displayed: 3 minutes (when auto off is set to 30 s or 1 min)
• When shooting using Pet portrait auto release: 5 minutes (when auto off is set
to 30 s or 1 min)
• When shooting using Smile timer: 5 minutes (when auto off is set to 30 s or 1
min)
• When the AC Adapter EH-62F is connected: 30 minutes
• When an HDMI cable is connected: 30 minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
128
Format Card/Format Memory
Press the dbutton Mz menu icon MFormat card/Format memory M
kbutton
Use this option to format a memory card or the internal memory.
Formatting the memory cards or internal memory permanently deletes
all data. Data that has been deleted cannot be recovered. Make sure to
save important images to a computer before formatting.
Formatting a Memory Card
•
•
Insert a memory card into the camera.
Select Format card in the setup menu and then press the kbutton.
Formatting the Internal Memory
•
•
Remove the memory card from the camera.
Select Format memory in the setup menu and then press the kbutton.
To start formatting, select Format on the screen that is displayed and press the
kbutton.
•
Do not turn the camera off or open the battery-chamber/memory card slot
cover during formatting.
•
This setting cannot be selected while Wi-Fi is connected.
Language
Press the dbutton Mz menu icon MLanguage Mkbutton
Select a language for display of camera menus and messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
129
Charge by Computer
Press the dbutton Mz menu icon MCharge by computer Mk
button
Option
a Auto
Description
When the camera is connected to a computer that is
is automatically charged using power supplied by the
computer.
(default setting)
The battery inserted into the camera is not charged
when the camera is connected to a computer.
Off
B Notes About Charging with a Computer
• When connected to a computer, the camera turns on and starts charging. If the
camera is turned off, charging stops.
• About 4 hours 10 minutes are required to charge a fully exhausted battery.
Charging time increases when images are transferred while the battery is charging.
• The camera turns off automatically if there is no communication with the
computer for 30 minutes after the battery has finished charging.
B When the Charge Lamp Quickly Flashes Green
Charging cannot be performed, possibly due to one of the reasons described below.
• The ambient temperature is not suited to charging. Charge the battery indoors
with an ambient temperature of 5°C to 35°C (41°F to 95°F).
• The USB cable is not connected correctly, or the battery is faulty. Make sure the USB
cable is connected correctly or replace the battery if necessary.
• The computer is in sleep mode and is not supplying power. Wake up the
computer.
• The battery cannot be charged because the computer cannot supply power to the
camera due to the computer’s settings or its specifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
Reset All
Press the dbutton Mz menu icon MReset all Mkbutton
When Reset is selected, the camera’s settings are restored to their default
values.
•
•
Some settings, such as Time zone and date or Language, are not reset.
This setting cannot be selected while Wi-Fi is connected.
C Resetting File Numbering
To reset file numbering to “0001”, delete all images saved on the memory card or in
Conformity Marking
Press the dbutton Mz menu icon MConformity marking Mk
button
View some of the conformity markings that the camera complies with.
Firmware Version
Press the dbutton Mz menu icon MFirmware version Mkbutton
View the current camera firmware version.
•
This setting cannot be selected while Wi-Fi is connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
131
Using Location Data Functions/
Displaying Maps
The camera starts to receive signals from positioning satellites when Record
location data in Location data options in the z (location data options)
Reception status can be checked on the shooting
0
screen.
15m
-10
1010hPa
•
n or o: The camera receives signals from three
or more satellites and is calculating the location
data.
•
•
z: The camera receives signals, but is not able to
perform positioning.
y: The camera does not receive signals.
Recording the Shooting Location Data to Images
•
The camera records location data (latitude and longitude) to images when
shooting while the camera is positioning.
•
When Compass display in Electronic compass in the location data
options menu is set to On, the approximate direction of shooting is also
recorded.
Recording Logs
•
When the camera is positioning and Create log in the location data options
menu is set to Start all logs, you can record location data, altitude, and
water depth data at specified intervals while you move around with the
camera.
•
Recorded logs (movement information such as location data, altitude, or
water depth) can be saved on a memory card and can be displayed as a
map or a graph when View log in the location data options menu is
selected. To save a log, select Create log and stop recording, and then
select Save logs.
Displaying a Map
•
The current position is displayed on a map when you press the U (map)
button while the shooting screen is displayed and the camera is positioning.
The image shooting location is displayed when you play back an image with
recorded location data and press the U button.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
132
Recording Location Data to Images
Press the dbutton Mz (location data options) menu icon MLocation
data options Mkbutton
functions.
Location data options
1
Set Record location data to On.
Press the dbutton or shutter-release
button to exit the menu screen after the
setting is complete.
•
Record location data
Update A-GPS file
Erase location data
•
Operate the camera under the open sky to
get better reception.
2
Check the reception status on the
shooting screen.
40
30
20
10
0
•
n or o: The camera receives signals
from three or more satellites and is
calculating the location data. The location
data is recorded to images.
15m
-10
1010hPa
25
m
0s
880
•
z: Signals are being received from the
satellites, but positioning is not possible.
The location data is not recorded to images.
Location data reception
•
•
y: Signals cannot be received from the satellites, and positioning is not
possible. The location data is not recorded to images.
Press the U button while the camera is
positioning to check the current position
3
Take a picture while the camera is
positioning.
•
The location data is recorded to the
captured image.
•
Recorded location data can be checked on
Download from Www.Somanuals.com. All Manuals Search And Download.
133
B Notes About Location Data Functions
• It takes a few minutes to calculate location data when positioning is performed for
the first time or after a long period in which positioning could not be performed, or
just after the battery is replaced.
• You can reduce the time for calculating location data by using the latest A-GPS file
• Positions of the positioning satellites change constantly.
You may not be able to determine the position or it may take some time
depending on your location and the time.
To use the location data functions, use the camera in an open-air area with few
obstacles in the sky.
• The following locations which block or reflect signals may result in failed or
inaccurate positioning.
- Inside buildings or underground locations
- Between high-rise buildings
- Under overpasses
- Inside tunnels
- Near high-voltage electrical power lines
- Between clusters of trees
- Underwater
• Using a mobile phone of 1.5 GHz band near this camera may disrupt positioning.
• When carrying this camera around while positioning, do not place it in a metal bag.
Positioning cannot be performed if the camera is covered with metal materials.
• When there is a significant difference in the signals from the positioning satellites,
there could be a deviation of up to several hundred meters.
• Be aware of your surroundings when positioning.
• The shooting date and time that is displayed when playing back images is
determined by the camera’s internal clock at the time of shooting.
The time at which the camera calculated the location data is recorded to images,
but it is not displayed on the camera screen.
• The location data for the first frame will be recorded on a series of images shot
using continuous shooting.
B Battery Drain While Recording Location Data and Log Recording
• When Record location data is set to On, record location data functions will continue
to operate at the specified interval for approximately six hours even after the camera is
turned off. Also, record location data functions and log recording will continue to
• When Record location data is set to On or while recording logs, the battery
power will drain faster than usual. Confirm the battery level especially when
recording a log using Start all logs or Start depth log.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
C Points of Interest (POI) Information
POI information is location name information for
the nearest landmarks (facilities) and other
details.
Location name information
(POI information)
• When Display POI in Points of interest
menu is set to On, the nearest location name
information for the current position is
displayed during shooting (only when the
camera is positioning).
40
30
20
10
0
15m
-10
1010hPa
25
m
0s
880
• When Embed POI is set to On, location name
information can be recorded on the image
during shooting (only when the camera is positioning).
• If the location name information was recorded on the image during shooting, this
information is displayed when Display POI is set to On during playback.
• The location name information may not be displayed depending on the setting
level in Level of detail in Points of interest (POI). Also, certain landmark names
may not be registered, or the landmark name may be different.
C Underwater Recording of Location Data
The screen on the right is displayed if you select
Underwater scene mode or select x (scene auto
selector) mode and then submerge the camera
underwater while location data is being calculated.
Underwater
Do you want to use the location data
last obtained before submerging?
These data will be recorded with
every shot taken until you resurface.
If you select Yes and press the kbutton, the
location data calculated prior to underwater
shooting is recorded to the images to be shot
underwater.
Yes
No
C Images with Recorded Location Data
• The z icon is displayed during playback for images which have the location data
• The location data recorded on an image can be checked on a map with ViewNX 2
• The actual shooting location may differ from the location data recorded to the
image files due to the accuracy of the calculated location data and differences in
the geodetic system used.
• The location data and POI information recorded on images can be erased using
cannot be recovered.
Download from Www.Somanuals.com. All Manuals Search And Download.
135
Displaying the Shooting Location (Playback Mode)
Press the cbutton (playback mode) Mselect an image recorded with
location data* MU button
*
The z icon is displayed during playback for images which have the location data
•
Shooting location: The shooting location of
the image with recorded location data is
displayed on a map. The shooting location of
the image selected before the U button was
pressed is displayed in yellow.
Shooting location
500m
The approximate shooting direction is
indicated by C for images captured when
(pointing toward the top of the screen)
indicates north.
•
•
Thumbnail display: If shooting locations
appear on the map, images are displayed as
thumbnails.
Thumbnail display
The operations described below can be performed while a map is displayed.
Map Operations
Operation
Description
Multi selector1 Move the map display (in eight directions).
• g(i): Zoom in on the map display.
Zoom control1
• f(h): Zoom out the map display.
U button
Return to the playback screen.
Select images in thumbnail playback mode. See “Operations
kbutton2
1
2
Disabled when there are no shooting locations on the displayed map.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
Operations When Thumbnail Images Are Selected
Operation
Description
Use JKto switch the selected thumbnail image.
Multi selector
•
The shooting location of the selected image changes to
yellow on the map.
• g(i): Display the selected image in full-frame playback mode.
Use JKto display the previous or next image.
• f(h): Return to the map display.
Zoom control
U button
Return to the playback screen.
A menu is displayed, and the options described below can be
selected.
Return to the map operation screen and
Scroll map*
display a map with the shooting location of the
selected image in the center.
Press the kbutton while the graph is
displayed to return to the map operation
screen.
Altitude/
depth logs*
kbutton
Save the shooting location of the selected
image.
Save location
Move directly to the saved location. See “Map
more information.
Center on
saved location
*
Only Altitude/depth logs can be selected if the camera was recording an
altitude/depth log when shooting the selected images. Only Scroll map can be
selected if the camera was not recording an altitude/depth log.
B Notes About Map Display
• Maps cannot be displayed while the camera is being charged with the charging
AC adapter.
• The map display cannot be rotated. Only the north up display (the top of the
screen indicates the north) is available.
• The map display scale varies depending on which country is shown on the map.
• If the dbutton is pressed while the map is displayed, Time zone and date,
Format card/Format memory, Language, and Reset all in the setup menu
Download from Www.Somanuals.com. All Manuals Search And Download.
137
Displaying the Current Position on a Map
(Shooting Mode)
1
2
Enter shooting mode while the camera is positioning MU button
2 A world map is displayed by pressing the U button when the camera is not
positioning.
•
The current position is displayed in the center
of the map. You can save a location and
display the map recorded with the saved
location.
Current position
•
•
When the camera lens faces downward, a
compass is displayed.
The previously displayed map is displayed
when the camera is turned on for the second
and subsequent times.
The operations described below can be
performed while a map is displayed.
Current positio
•
Compass
Operation
Description
Multi selector1 Move the map display (in eight directions).
• g(i): Zoom in on the map display.
Zoom control1
• f(h): Zoom out the map display.
Display a screen that indicates information such as the direction
screen.
U button
A menu is displayed, and the options described below can be
selected.
Center on
Display the current position in the center of the
current
map.
location2
Use the multi selector to select a location, and press
the kbutton to save the location (up to 30 locations).
kbutton
Save
location
•
Select No on the confirmation dialog to exit the
registration screen..
Center on Move directly to the saved location.
saved
location
•
1
2
Cannot be selected when the camera is not positioning.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
C Notes About Direction and Location Data Display
Direction or location data, etc. is displayed when a map is being displayed in
shooting mode or if the U button is held down while the power is off.
1
2
3
4
5
6
7
8
9
Date and time
1
23 4
Location data reception
Create log display (location data)
Create log display (altitude/water depth)
Altitude
15
/
11/2015 15:30
m
1554
5
1010 hPa
NNE
6
7
8
Atmospheric pressure
Direction
º
24 19’21”
N
E
º
124 04’37”
9
Latitude and longitude
Location name information (Points of
Interest: POI)*
10
10 Compass display
*
“----” may be displayed for the location name information depending on the
setting level in Level of detail of Points of interest (POI).
C Map Operations of Saved Locations
500m
If you press the kbutton and select Center on
scrolls to the saved location that is closest to the
center of the screen.
• Use the multi selector HIJKto move to other
saved locations.
• Press the lbutton to cancel saving a location.
-
-
Current location: Cancel saving of the selected location.
Selected locations: Delete a batch of saved locations. Use the multi selector to
select a saved location and press the lbutton. Press the lbutton again to
deselect it. Press the kbutton after you finish selecting the locations.
-
All locations: Delete the all saved locations at once.
• Press the kbutton to exit the operation screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
139
Using Altimeter and Depth Gauge
You can check the atmospheric pressure as well as the altitude or water depth
of the current position on the screen, and record the displayed values to the
captured images.
•
The altitude, water depth, and atmospheric pressure that are recorded to
the playback menu.
•
Captured images and related logs can be displayed if you use the altitude or
B Notes About Altimeter and Depth Gauge
data options menu to correct the altitude or water depth in advance. Before using
the camera underwater, make sure to adjust the data to 0 m (0 ft) at the surface of
water.
• Do not use the altimeter or depth gauge in this camera for specialized applications
such as mountain climbing or underwater diving. The displayed information is
intended as a general guide only.
• Since the altitude is calculated using the camera's internal barometer, the data may
not be displayed correctly in some climate conditions.
• When the scale of the depth gauge display exceeds 25 m (82 ft), the depth gauge
display turns orange. When the scale of the depth gauge display exceeds 30 m (98
ft), the depth gauge display turns red.
C Altitude/Water Depth
• The altimeter or depth gauge can be
Altimeter or depth gauge
displayed when Altimeter/depth gauge
in Altitude/depth options in the location
40
data options menu is set to On (default
30
setting).
20
10
• The depth gauge and water depth are
0
15m
displayed when you select Underwater
scene mode, or select x (scene auto
-10
1010hPa
25
m
0s
selector) mode and then submerge the
camera underwater. If the camera is not
being used underwater when Underwater Atmospheric
is selected, the depth gauge display is fixed pressure
at 0 m (0 ft).
880
Altitude or water
depth
• The display range of the altitude is -300 m
to +4500 m (-984 to +14,760 ft), and the
display range of the water depth is 0 m to 35 m (0 ft to 114 ft).
• When altitude or water depth is corrected, i is displayed next to the altitude or
water depth.
Download from Www.Somanuals.com. All Manuals Search And Download.
140
Recording Movement Data Logs
Press the dbutton Mz (location data options) menu icon MCreate
log Mkbutton
Create log
Start all logs
1
Use the multi selector HIto
select the type of log to record,
and press the kbutton.
End all logs
Start location log
End location log
Start depth log
End depth log
•
•
•
Start all logs: Location, altitude, and water
depth data logs are recorded.
Start location log: A location data log is
recorded.
Start depth log: A water depth log is
recorded.
Log interval
15 s
2
3
Select the interval to use for log
recording, and press the k
button.
30 s
1 min
3 min
5 min
10 min
•
The intervals that can be set vary
depending on the type of log that is
recorded.
•
If Start depth log was selected, log
recording starts (the time duration is fixed
at one hour).
Start log
Select the duration of the log
recording, and press the k
button.
Log data for next 6 hrs
Log data for next 12 hrs
Log data for next 24 hrs
Log data for next 72 hrs
•
•
•
Log recording starts. Press the dbutton
to exit the menu screen.
D is displayed on the shooting screen
Log recording automatically ends when the
specified time elapses, and the log data is temporarily recorded on the
camera. Save the log data to a memory card when log recording is complete
•
Logs that are saved to a memory card can be displayed on a map or as a
Download from Www.Somanuals.com. All Manuals Search And Download.
141
B Notes About Log Recording
• If the date and time are not set, the log cannot be recorded.
• When recording all logs or a water depth log, correct the altitude or water depth
data options menu before log recording starts.
• Use a fully charged battery to prevent the camera from turning off during log
recording. When the battery power becomes exhausted, log recording ends.
While the altitude log or water depth log is recorded, the battery is exhausted
much faster. Exercise caution regarding the remaining battery level.
• Log data cannot be recorded while the camera is not positioning, even if log
recording has already started.
• Even when the camera is turned off, log recording is continuously performed until
the preset time has elapsed if there is still time remaining for log recording.
• Log recording ends due to the operations below even when there is time
remaining for log recording.
-
-
The battery is removed
Record location data in Location data options is set to Off (except when
Start depth log is used to start recording a depth log).
Reset all in the setup menu is performed
The setting of the internal clock (time zone or date and time) is changed
An option to end log recording is selected in Create log in the location data
-
-
-
• Log recording is paused during the operations below.
-
-
-
During continuous shooting
During movie recording
When connected with a USB cable or HDMI cable
Log recording is resumed when the above operations are finished.
• The log data is temporarily stored in the camera. New logs cannot be recorded if
the log data remains in the camera. After recording log data, save it on a memory
Download from Www.Somanuals.com. All Manuals Search And Download.
142
Ending Log Recording and Saving Logs on a
Memory Card
Press the dbutton Mz (location data options) menu icon MCreate
log Mkbutton
Recorded logs must to be saved to a memory card in order to display them on
a map or as a graph.
Create log
Start all logs
1
When log recording is completed,
select the log to end and press the
kbutton.
End all logs
Start location log
End location log
Start depth log
End depth log
•
You can select the log to end recording
before the specified time duration elapses.
End all logs
2
Select Save logs, and press the k
button.
•
The log data is saved to a memory card.
Save logs
Erase logs
B Notes About Log Data
• No log data is saved if the camera is unable to calculate any location data between
the time that log recording starts and ends.
C Erasing Log Data
• To erase the log data that is temporarily stored in the camera, select Erase logs in
step 2.
• To erase the log data that is stored on the memory card, select Location logs
Download from Www.Somanuals.com. All Manuals Search And Download.
143
Displaying the Recorded Location Data on a Map
Press the dbutton Mz (location data options) menu icon MView log
Mkbutton MLocation logs Mkbutton
500m
•
•
•
When you select a log (date) that you want to
display and press the kbutton, the route of
the recorded log is displayed on a map.
Press the lbutton when the log list screen is
displayed to delete the selected log or all saved
location logs.
The operations described below can be
performed while a map is displayed.
Location log
Operation
Description
Multi selector* Move the map display (in eight directions).
• g(i): Zoom in on the map display.
Zoom control*
• f(h): Zoom out the map display.
lbutton
Delete the displayed log.
A menu is displayed, and the options described below can be
selected.
Location
logs
Return to the log list screen.
Use the multi selector to select a location, and
press the kbutton to save the location (up to 30
locations).
kbutton
Save
location
•
Select No on the confirmation dialog to exit the
registration screen.
Center on Move directly to the saved location.
saved
location
•
*
C Location Log Data
Log data is NMEA format-compliant. However, the log data is not guaranteed to
display in all NMEA format-compliant software or cameras.
Download from Www.Somanuals.com. All Manuals Search And Download.
144
Display Altitude/depth Logs as a Graph
Press the dbutton Mz (location data options) menu icon MView log
Mkbutton MAltitude/depth logs Mkbutton
•
Select a log (date) that you want to display
and press the kbutton to display the
altitude or water depth data as a graph.
Shooting point
Selection area
m
/
time
100
0
10
20
30
40
50
60
-
The horizontal axis of the graph shows
the total time of log recording, and the
vertical axis of the graph shows the total
variations in altitude/depth during log
recording.
80
60
40
20
0
15/11/2015 [2] 15:30
-
If images were captured while the log
was being recorded, they are displayed
as thumbnails, and shooting points are
displayed on a graph.
Thumbnail display
•
•
Press the lbutton when the log list screen
is displayed to delete the selected log or all saved altitude/depth logs.
The operations described below can be performed while a graph is displayed.
Operation
Description
Return to the log list screen.
Use JKto move the yellow selection area.
dbutton
Multi selector
Zoom control
•
The yellow selection area is displayed when the camera
obtains more than 30 recorded logs.
Move toward g(i) to zoom in on the area inside the selection area.
•
•
Use JKto move the displayed area.
Move toward f(h) to return to the full graph display.
Thumbnail images are selected, and operations described
below can be performed.
Use JKto switch the selected image.
Multi
selector
•
The shooting point of the selected image
changes to yellow on the graph.
kbutton
• g(i): Display the selected image in full-frame
playback mode.
Zoom
control
Use JKto display the previous or next image.
• f(h): Return to the graph display.
kbutton Return to the graph operation screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
145
Using the Wi-Fi (Wireless LAN)
Function
You can perform the following functions if you install the dedicated software
“Wireless Mobile Utility” on your smart device that runs on Android OS or iOS,
and connect it to the camera.
Take Photos
You can capture still images using the two methods described below.
•
•
Release the shutter on the camera and save the captured images to a smart device.
Use a smart device to remotely release the camera shutter and save images
to the smart device.
View Photos
Images that are saved in the camera’s memory card can be transferred and
viewed on your smart device. You can also preselect the images in the camera
that you want to transfer to your smart device.
B Notes
Security settings such as the password are not configured at the time of purchase. It
is the user’s responsibility to configure the appropriate security settings in Options
Installing the Software on the Smart Device
1
Use your smart device to connect to the Google Play Store,
App Store or other online apps marketplace and search for
“Wireless Mobile Utility.”
•
Check the user’s manual provided with your smart device for further details.
2
Check the description and other information and install the
software.
C User’s Manual for Wireless Mobile Utility
Download the user’s manual from the website below.
• Android OS: http://nikonimglib.com/ManDL/WMAU/
• iOS: http://nikonimglib.com/ManDL/WMAU-ios/
To establish a connection with the camera, press the Z(Wi-Fi) button on the camera,
turn on the Wi-Fi function of the smart device, and then start the “Wireless Mobile Utility”
on the smart device while “Negotiating... Please wait.” is displayed on the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
Connecting the Smart Device to the
Camera
1
Press the Z(Wi-Fi) button on the
camera.
•
•
The screen shown on the right is displayed.
If no connection confirmation is received
from the smart device within three
Connect to smart device
SSID:
XXXXXXXXXXXXXXXXXX
XXXXXX
minutes, No access. is displayed and the
camera returns to the Wi-Fi options screen.
•
You can also select Connect to smart
device in the Wi-Fi options menu to
display the screen shown on the right.
Cancel
2
3
Set the Wi-Fi setting on the smart device to On.
•
•
Check the user’s manual provided with your smart device for further details.
After the network names (SSIDs) that can be used for the smart device are
displayed, select the SSID displayed on the camera.
•
When Auth./encryp. in the Wi-Fi options menu is set to WPA2-PSK-AES,
the message for entering a password is displayed. Enter the password that is
displayed on the camera.
While “Negotiating... Please wait.” is displayed on the camera,
start the “Wireless Mobile Utility” installed on the smart device.
•
•
The screen for selecting “Take photos” or “View photos” is displayed.
When the message “Cannot connect to camera.” is displayed, return to step
1 and retry the procedure.
•
C Touching an NFC-compatible Smart Device to the Camera for a
Wi-Fi Connection
When you use an Android OS smart device that is
compatible with near field communication (NFC)
functions, you can establish a Wi-Fi connection and start
the “Wireless Mobile Utility” by touching the NFC antenna
of the smart device to the Y(N-Mark) on the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
147
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
• Turn off the camera.
• Select Disable Wi-Fi in the Wi-Fi options menu on the camera (except when the
camera is operated by remote control).
• Set the Wi-Fi setting on the smart device to Off.
B Notes About Wi-Fi Connection
• Wi-Fi connection operations are disabled in the following situations:
- When the camera is connected to a TV, computer, or printer
- While recording movies
- While the camera is processing data such as saving images or recording movies
- When the camera is connected to a smart device
• Select Disable Wi-Fi in areas where the use of radio waves is prohibited.
• When Wi-Fi is connected, Auto off is disabled.
• When Wi-Fi is connected, the battery drains faster than normal.
• Wi-Fi is disconnected in the following situations:
- When the battery level is low
- When movie recording starts in short movie show mode
C Security Settings
If no security settings (encryption and password) are configured for the camera’s
Wi-Fi function, unauthorized third parties may access the network and cause harm.
We strongly recommend performing the required security settings before using the
Wi-Fi function.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
Preselecting Images in the Camera That
You Want to Transfer to a Smart Device
You can preselect images in the camera that you want to transfer to a smart
device. Movies cannot be preselected for transfer.
1
Select images to transfer.
You can preselect the images to transfer to a smart device in the following
menus:
•
•
When using Upload from camera, the SSID and password of the camera are
displayed after images are selected.
2
When you tap “View Photos” in the “Wireless Mobile Utility”, the confirmation
screen is displayed and the specified images are transferred to the smart
device.
B Preselecting Images to Transfer During Playback
While the camera is in playback mode, press the Z(Wi-Fi) button or use the NFC
function to establish a Wi-Fi connection, and preselect the displayed images that you
want to transfer.
• In full-frame playback mode, you can add one image at a time. When a key picture
is selected, all images in that sequence are added.
• In thumbnail playback mode, you can add one image that is selected by the cursor.
• In calendar display mode, you can add all images that were captured on the
selected date.
This operation is not available when you use Connect to smart device in the Wi-Fi
options menu to establish the Wi-Fi connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
149
Connecting the Camera to a TV,
Printer, or Computer
You can enhance your enjoyment of images and movies by connecting the
camera to a TV, printer, or computer.
HDMI micro connector
(Type D)
Micro-USB connector
Open the battery-chamber/
memory card slot cover
Insert the plug straight.
•
Before connecting the camera to an external device, make sure the
remaining battery level is sufficient and turn the camera off. Additionally,
open the battery-chamber/memory card slot cover and make sure that no
water droplets are inside. Wipe away any moisture with a soft dry cloth
before connecting the camera to the device. Before disconnecting, make
sure to turn the camera off.
•
•
If the AC Adapter EH-62F (available separately) is used, this camera can be
powered from an electrical outlet. Do not use any other make or model of
AC adapter as it may cause the camera to heat up or malfunction.
For information about the connection methods and subsequent operations,
refer to the documentation included with the device in addition to this
document.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
Viewing images on a TV
Images and movies captured with the camera can be viewed
on a TV.
Connection method: Connect a commercially available HDMI
cable to the TV’s HDMI input jack.
Printing images without using a computer
If you connect the camera to a PictBridge-compatible printer,
you can print images without using a computer.
Connection method: Connect the camera directly to the
printer’s USB port with the USB cable.
Viewing and organizing images on a computer
You can transfer images to a computer to perform simple
retouching and manage image data.
Connection method: Connect the camera to the computer’s
USB port with the USB cable.
•
•
Before connecting to a computer, install ViewNX 2 on the
If any USB devices that draw the power from the computer
are connected, disconnect them from the computer before
you connect the camera to it. Connecting the camera and
other USB-powered devices to the same computer
simultaneously may cause a camera malfunction or
excessive power supply from the computer, which could
damage the camera or memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
151
Connecting the Camera to a TV (Playback
on a TV)
1
Turn off the camera and connect it to the TV.
•
Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
HDMI micro connector (Type D)
to HDMI jack
2
3
Set the TV’s input to external input.
•
See the documentation provided with your TV for details.
Hold down the c(playback)
button to turn on the camera.
•
Images are displayed on the TV.
•
The camera monitor does not turn on.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
Connecting the Camera to a Printer (Direct
Print)
Users of PictBridge-compatible printers can connect the camera directly to the
printer and print images without using a computer.
Connecting the Camera to a Printer
1
2
Turn on the printer.
Turn off the camera and connect it to the printer using the
USB cable.
•
Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
3
The camera is automatically turned on.
•
The PictBridge startup screen ( ) is displayed in the camera monitor,
1
followed by the Print selection screen ( ).
2
Print selection
15/11/2015
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
153
B If the PictBridge Startup Screen Is Not Displayed
print images with direct connection of the camera to some printers. If the PictBridge
startup screen is not displayed after the camera is turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the
camera to the printer.
Printing Images One at a Time
Print selection
15/11/2015
1
2
3
Use the multi selector JKto
select the desired image and press
the kbutton.
•
Move the zoom control toward f(h) to
switch to thumbnail playback or g(i) to
switch to full-frame playback.
PictBridge
Use HIto select Copies and
press the kbutton.
1
prints
•
Use HIto set the desired number of
copies (up to nine) and press the kbutton.
Start print
Copies
Paper size
PictBridge
4
Select Paper size and press the k
button.
prints
•
•
•
Select the desired paper size and press the
kbutton.
To print with the paper size setting
configured on the printer, select Default.
The paper size options available on the
camera vary depending on the printer that
you use.
Start print
Copies
Paper size
PictBridge
4
4
Select Start print and press the k
button.
prints
•
Printing starts.
Start print
Copies
Paper size
Download from Www.Somanuals.com. All Manuals Search And Download.
154
Printing Multiple Images
Print selection
15/11/2015
1
When the Print selection screen
is displayed, press the d(menu)
button.
Print menu
2
Use the multi selector HIto
select Paper size and press the k
button.
Print selection
Print all images
Paper size
•
•
•
•
Select the desired paper size and press the
kbutton.
To print with the paper size setting
configured on the printer, select Default.
The paper size options available on the
camera vary depending on the printer that you use.
To exit the print menu, press the dbutton.
Print menu
3
Select Print selection, or Print all
images, and press the kbutton.
Print selection
Print all images
Paper size
Download from Www.Somanuals.com. All Manuals Search And Download.
155
Print selection
Select images (up to 99) and the number
of copies (up to 9) of each.
Print selection
10
3
•
Use the multi selector JKto select
images, and use HIto specify the
number of copies to be printed.
1
1
•
Images selected for printing are
indicated by M and the number of
copies to be printed. To cancel the print
selection, set the number of copies to 0.
Back
•
•
Move the zoom control toward g(i) to switch to full-frame playback or
f(h) to switch to thumbnail playback.
Press the kbutton when setting is complete. When the screen for
confirming the number of print copies is displayed, select Start print
and press the kbutton to start printing.
Print all images
One copy each of all images saved in the internal memory, or on the
memory card, is printed.
•
When the screen for confirming the number of print copies is displayed,
select Start print and press the kbutton to start printing.
Download from Www.Somanuals.com. All Manuals Search And Download.
156
Using ViewNX 2 (Transferring Images to a
Computer)
Installing ViewNX 2
ViewNX 2 is free software that enables you to transfer images and movies to
your computer so that you can view, edit, or share them. To install ViewNX 2,
download the ViewNX 2 installer from the website below and follow the on-
screen installation instructions.
http://nikonimglib.com/nvnx/
For system requirements and other information, see the Nikon website for your
region.
Transferring Images to a Computer
1
Prepare a memory card that contains images.
You can use any of the methods below to transfer images from the memory
card to a computer.
•
SD memory card slot/card reader: Insert the memory card into the card
slot of your computer or the card reader (commercially available) that is
connected to the computer.
•
Direct USB connection: Turn the camera off and ensure that the memory
card is inserted in the camera. Connect the camera to the computer using
the USB cable.
The camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove
the memory card from the camera before connecting it to the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
157
If a message is displayed prompting you to choose a program, select
Nikon Transfer 2.
•
When using Windows 7
If the dialog shown at right is
displayed, follow the steps
below to select
Nikon Transfer 2.
1 Under Import pictures
and videos, click Change
program. A program
selection dialog will be
displayed; select Import File using Nikon Transfer 2 and click OK.
2 Double-click Import File.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B Notes About Connecting the USB Cable
Operation is not guaranteed if the camera is connected to the computer via a USB
hub.
2
After Nikon Transfer 2 starts, click Start Transfer.
Start Transfer
Image transfer begins. When image transfer is complete, ViewNX 2 starts and
the transferred images are displayed.
Consult online help for more information on using ViewNX 2.
•
•
3
Terminate the connection.
•
If you are using a card reader or card slot, choose the appropriate option in
the computer operating system to eject the removable disk corresponding
to the memory card and then remove the memory card from the card reader
or card slot.
•
If the camera is connected to the computer, turn the camera off and
disconnect the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
158
Technical Notes
Caring for the Product .................................................................................160
The Camera..............................................................................................160
The Battery...............................................................................................161
Memory Cards.........................................................................................163
Cleaning and Storage ..................................................................................164
Cleaning....................................................................................................164
Storage ......................................................................................................164
Error Messages ...............................................................................................165
Troubleshooting ............................................................................................170
File Names........................................................................................................180
Optional Accessories....................................................................................182
DATA ..................................................................................................................187
Specifications..................................................................................................192
Index...................................................................................................................199
Download from Www.Somanuals.com. All Manuals Search And Download.
159
Caring for the Product
Observe the precautions described below in addition to the warnings in “For
The Camera
Do Not Apply Strong Impact to the Camera
The product may malfunction if subjected to strong shock or vibration. In addition,
do not touch or apply force to the lens.
Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building
on a cold day, can cause condensation to form inside the device. To prevent
condensation, place the device in a carrying case or a plastic bag before exposing it
to sudden changes in temperature.
Keep Away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields. Doing so could result in loss of data or
camera malfunction.
Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods
when using or storing the camera. Intense light may cause the image sensor to
deteriorate or produce a white blur effect in photographs.
Turn the Product Off Before Removing or Disconnecting the Power
Source or Memory Card
Do not remove the battery while the product is on, or while images are being saved
or deleted. Forcibly cutting power in these circumstances could result in loss of data
or in damage to product memory or internal circuitry.
Download from Www.Somanuals.com. All Manuals Search And Download.
160
Notes About the Monitor
• Monitors and electronic viewfinders are constructed with extremely high precision;
at least 99.99% of pixels are effective, with no more than 0.01% being missing or
defective. Hence while these displays may contain pixels that are always lit (white,
red, blue, or green) or always off (black), this is not a malfunction and has no effect
on images recorded with the device.
• Due to the general characteristics of OLED monitors, prolonged or repeated
display of the same screen or image may result in screen burn. Screen burn can be
recognized by decreased brightness in portions of the monitor or mottled display.
In some cases, screen burn may become permanent. However, images are in no
way affected by screen burn.
To prevent screen burn, do not set monitor brightness higher than necessary and
do not display the same screen or image for an extended period of time.
• Images in the monitor may be difficult to see under bright lighting.
• Do not apply pressure to the monitor, as this could cause damage or malfunction.
Should the monitor break, care should be taken to avoid injury caused by broken
glass.
The Battery
Precautions for Use
• Note that the battery may become hot after use.
• Do not use the battery at ambient temperatures below -10°C (-14°F) or above 40°C
(104°F) as this could cause damage or malfunction.
• If you notice any abnormalities such as excessive heat, smoke, or an unusual smell
coming from the battery, immediately discontinue use and consult your retailer or
Nikon-authorized service representative.
• After removing the battery from the camera or optional battery charger, put the
battery in a plastic bag, etc. in order to insulate it.
Charging the Battery
Check the battery level before using the camera and replace or charge the battery if
necessary.
• Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to
95°F) before use.
• A high battery temperature may prevent the battery from charging properly or
completely, and may reduce battery performance. Note that the battery may
become hot after use; wait for the battery to cool before charging.
When charging the battery inserted into this camera using the Charging AC
Adapter or a computer, the battery is not charged at battery temperatures below
0°C (32°F) or above 45°C (113°F).
• Do not continue charging once the battery is fully charged as this will result in
reduced battery performance.
• The battery temperature may increase during charging. However, this is not a
malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
161
Carrying Spare Batteries
Whenever possible, carry fully charged spare batteries when taking pictures on
important occasions.
Using the Battery When Cold
On cold days, the capacity of batteries tends to decrease. If an exhausted battery is
used at a low temperature, the camera may not turn on. Keep spare batteries in a
warm place and exchange as necessary. Once warmed, a cold battery may recover
some of its charge.
Battery Terminals
Dirt on the battery terminals may prevent the camera from functioning. Should the
battery terminals become dirty, wipe them off with a clean, dry cloth before use.
Charging an Exhausted Battery
Turning the camera on or off while an exhausted battery is inserted in the camera
may result in reduced battery life. Charge the exhausted battery before use.
Storing the Battery
• Always remove the battery from the camera or optional battery charger when it is
not being used. Minute amounts of current are drawn from the battery while it is in
the camera, even when not in use. This may result in excessive battery drain and
complete loss of function.
• Recharge the battery at least once every six months and completely exhaust it
before returning it to storage.
• Put the battery in a plastic bag, etc. in order to insulate it and store it in a cool place.
The battery should be stored in a dry location with an ambient temperature of 15°C
to 25°C (59°F to 77°F). Do not store the battery in hot or extremely cold locations.
Battery Life
A marked drop in the time a fully charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new battery.
Recycling Used Batteries
Replace the battery when it no longer holds a charge. Used batteries are a valuable
resource. Please recycle used batteries in accordance with local regulations.
The Charging AC Adapter
• The Charging AC Adapter EH-71P/EH-71PCH is for use only with compatible
devices. Do not use with another make or model of device.
• Do not use any USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
• Do not, under any circumstances, use another make or model of AC adapter other
than Charging AC Adapter EH-71P/EH-71PCH, and do not use a commercially
available USB-AC adapter or a battery charger for a mobile phone. Failure to
observe this precaution could result in overheating or in damage to the camera.
• The EH-71P/EH-71PCH is compatible with AC 100–240 V, 50/60 Hz electrical outlets.
When using in other countries, use a plug adapter (commercially available) as
necessary. For more information about plug adapters, consult your travel agency.
Download from Www.Somanuals.com. All Manuals Search And Download.
162
Memory Cards
Precautions for Use
recommended memory cards.
• Be sure to follow the precautions described in the documentation included with
the memory card.
• Do not put labels or stickers on memory cards.
Formatting
• Do not format the memory card using a computer.
• The first time you insert a memory card that has been used in another device into
this camera, be sure to format it with this camera. We recommend formatting new
memory cards with this camera before using them with this camera.
• Note that formatting a memory card permanently deletes all images and
other data on the memory card. Be sure to make copies of any images you wish
to keep before formatting the memory card.
• If the message Card is not formatted. Format card? is displayed when the
camera is turned on, the memory card must be formatted. If there is data that you
do not want to delete, select No. Copy the necessary data to a computer, etc. If you
want to format the memory card, select Yes. The confirmation dialog will be
displayed. To start formatting, press the kbutton.
• Do not perform the following during formatting, while data is being written to or
deleted from the memory card, or during data transfer to a computer. Failure to
observe this precaution could result in the loss of data or in damage to the camera
or memory card:
- Open the battery-chamber/memory card slot cover to remove/insert the battery
or memory card.
- Turn off the camera.
- Disconnect the AC adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
163
Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Avoid touching glass parts with your fingers. Remove dust or lint with
a blower (typically a small device with a rubber bulb attached to one
end that is pumped to produce a stream of air out the other end). To
remove fingerprints or other stains that cannot be removed with a
blower, wipe the lens with a soft cloth, using a spiral motion that
Lens
starts at the center of the lens and working toward the edges. If this
fails, clean the lens using a cloth lightly dampened with commercial
lens cleaner.
Remove dust or lint with a blower. To remove fingerprints and other
Monitor
Body
stains, clean the monitor with a soft, dry cloth, being careful not to
apply pressure.
•
•
Use a blower to remove dust, dirt, or sand, then wipe gently with a
soft, dry cloth.
Do not puncture the microphone or speaker openings with a
sharp implement. If the inside of the camera is damaged, the
waterproof performance will deteriorate.
•
more information.
Note that foreign matter inside the camera could cause damage
not covered by the warranty.
Storage
Remove the battery if the camera will not be used for an extended period. To
prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the
camera away again. Do not store the camera in any of the following locations:
•
•
•
Places that are poorly ventilated or subject to humidity of over 60%
Exposed to temperatures above 50°C (122°F) or below –10°C (14°F)
Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
Download from Www.Somanuals.com. All Manuals Search And Download.
164
Error Messages
Refer to the table below if an error message is displayed.
Display
Cause/Solution
A
Battery temperature is
elevated. The camera will
turn off.
The camera turns off automatically. Wait
until the camera or battery temperature
has cooled before resuming use.
–
–
The camera will turn off
to prevent overheating.
The write-protect switch is in the “lock”
position. Slide the write-protect switch to
the “write” position.
Memory card is write
protected.
This card cannot be used. An error occurred while accessing the
memory card.
•
•
•
Use an approved memory card.
Check that the terminals are clean.
Confirm that the memory card is
correctly inserted.
This card cannot be read.
The memory card has not been
formatted for use in the camera.
Formatting deletes all data saved on the
memory card. If you need to keep copies
of any images, make sure to select No
and save the copies to a computer or
other medium before formatting the
memory card. Select Yes and press the
kbutton to format the memory card.
Card is not formatted.
Format card?
Delete images or insert a new memory
card.
Out of memory.
An error occurred while saving the image.
Insert a new memory card or format the
memory card or internal memory.
The camera has run out of file numbers.
Image cannot be saved. Insert a new memory card or format the
memory card or internal memory.
There is insufficient space to save the
copy.
Delete images from the destination.
Download from Www.Somanuals.com. All Manuals Search And Download.
165
Display
Cause/Solution
A
The camera turned off while recording a
time-lapse movie.
Save previously recorded
data as a time-lapse
movie?
•
Select Yes to create a time-lapse movie
with the previously captured images.
Select No to delete the incomplete
data.
–
•
Image cannot be
modified.
Check that the images can be edited.
A time-out error occurred while saving
the movie on the memory card.
Select a memory card with a faster write
speed.
Cannot record movie.
There are no images in the internal
memory or on the memory card.
•
Remove the memory card to play back
images in the internal memory.
To copy the images saved in the
camera’s internal memory to the
memory card, press the dbutton to
select Copy in the playback menu.
Memory contains no
images.
•
File contains no image
data.
The file was not created or edited with
this camera.
The file cannot be viewed on this camera.
View the file using a computer or the
device used to create or edit this file.
–
This file cannot be played
back.
There are no images available for a slide
show, etc.
All images are hidden.
This image cannot be
deleted.
The image is protected.
Disable protection.
The camera clock was not set correctly.
Change the location or time and
determine the location again.
Failed to set clock from
satellite.
–
An A-GPS file that can be updated is not
found on the memory card.
Check the following items:
•
•
Whether the memory card is inserted
Whether the A-GPS file is stored on the
memory card
No A-GPS file found on
card.
–
•
Whether the A-GPS file saved on the
memory card is more recent than the
A-GPS file saved in the camera
Whether the A-GPS file is still valid
•
Download from Www.Somanuals.com. All Manuals Search And Download.
166
Display
Cause/Solution
A
The A-GPS file is unable to be updated.
The A-GPS file may be corrupted.
Download the file from the website once
more.
Update failed.
–
The camera is unable to determine the
current position when distance is
calculated.
Change the location or time and
determine the location again.
Unable to determine
current position.
A memory card is not inserted.
Insert a memory card.
No log data was recorded.
The maximum number of log data events
that can be saved per day has been
exceeded.
•
per day
•
Altitude and water depth logs: Up to
34 log data events each per day
Cannot save to card.
The maximum number of log data events
that can be saved in one memory card
has been exceeded.
•
Location logs: Up to 100 log data
events
•
Altitude log and water depth log:
Combined total of up to 100 log data
events
Replace the memory card with a new one
or delete log data that is no longer
required from a memory card.
The camera is unable to calibrate the
electronic compass.
Unable to correct
compass.
Swing the camera to draw a figure eight
in the air outdoors while turning your
wrist to face the camera forward and
backward, side to side, or up and down.
Download from Www.Somanuals.com. All Manuals Search And Download.
167
Display
Cause/Solution
A
The camera could not receive the signal
from the smart device. Establish the
wireless connection again.
•
•
Press the Z(Wi-Fi) button.
Touch an NFC-compatible smart
device to the camera.
No access.
•
Select Connect to smart device in
the Wi-Fi options menu.
The camera failed to establish the
connection while receiving the signals
from the smart device. Set a different
channel in Channel under Options in
the Wi-Fi options menu, and establish the
wireless connection again.
Could not connect.
The Wi-Fi connection is disconnected in
the following situations:
•
•
•
When the reception is poor
When the battery level is low
When a cable is connected or
disconnected, or a memory card is
removed or inserted
Wi-Fi connection
terminated.
Use a fully charged battery, disconnect
the TV, computer, and printer from the
camera, and establish the wireless
connection again.
Lens error.
Try again after turning
the camera off and on.
If the error persists, contact your retailer
or Nikon-authorized service
representative.
An error occurred while communicating
with the printer.
Turn the camera off and reconnect the
USB cable.
Communications error
System error
An error occurred in the camera’s internal
circuitry.
Turn the camera off, remove and reinsert
the battery, and turn the camera on. If the
error persists, contact your retailer or
Nikon-authorized service representative.
Download from Www.Somanuals.com. All Manuals Search And Download.
168
Display
Cause/Solution
A
After solving the problem, select Resume
and press the kbutton to resume
printing.*
Printer error: check
printer status.
–
–
–
–
–
–
Load the specified size of paper, select
Resume, and press the kbutton to
resume printing.*
Printer error: check
paper.
Remove the jammed paper, select
Resume, and press the kbutton to
resume printing.*
Printer error: paper jam.
Load the specified size of paper, select
Resume, and press the kbutton to
resume printing.*
Printer error: out of
paper.
There is a problem with the printer’s ink.
Check the ink, select Resume, and press
the kbutton to resume printing.*
Printer error: check ink.
Printer error: out of ink.
Replace the ink cartridge, select Resume,
and press the kbutton to resume
printing.*
There is a problem with the image file to
be printed.
Select Cancel and press the kbutton to
cancel printing.
Printer error: file corrupt.
–
*
See the documentation provided with your printer for further guidance and
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
169
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service
representative.
Power, Display, Settings Issues
Problem
Cause/Solution
Wait for recording to end.
A
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert
The camera is on the battery or batteries or, if you are using an AC
but does not
respond.
adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
–
•
•
The battery is exhausted.
–
The camera
cannot be turned
on.
The power switch is enabled a few seconds after
the battery is inserted. Wait a few seconds before
pressing the power switch.
•
•
•
(auto off function).
low temperatures.
The camera turns
off without
warning.
The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
–
•
•
The camera is off.
(auto off function).
•
The flash lamp flashes while the flash is charging.
Wait until charging is complete.
The camera is connected to a TV or computer.
The camera and smart device are connected
using a Wi-Fi connection and the camera is being
operated by remote control.
–
The monitor is
blank.
•
•
–
–
The camera may become hot when used for an
extended period of time to shoot movies or when
used in a hot environment; this is not a malfunction.
The camera
becomes hot.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
170
Problem
Cause/Solution
Confirm all connections.
When connected to a computer, the camera may
not charge for any of the reasons described
below.
A
•
•
-
-
-
Off is selected for Charge by computer in
–
the setup menu.
Battery charging stops if the camera is turned
off.
The battery
display language and date and time have not
been set, or the date and time were reset after
the camera’s clock battery was exhausted. Use
the Charging AC Adapter to charge the
battery.
inserted in the
camera cannot be
charged.
-
-
Battery charging may stop when the computer
enters sleep mode.
Depending on the computer specifications,
settings, and status, battery charging may not
be possible.
–
–
The monitor is
hard to read.
•
•
Adjust the monitor brightness.
The monitor is dirty. Clean the monitor.
O flashes on the
screen.
•
If the camera clock has not been set, O flashes
on the shooting screen, and images and movies
saved before the clock is set are dated “00/00/
0000 00:00” and “01/01/2015 00:00” respectively.
Set the correct time and date for Time zone and
date in the setup menu.
The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepiece, and reset as required.
Date and time of
recording are not
correct.
•
No indicators
displayed in
monitor.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Date stamp not Time zone and date has not been set in the setup
available.
menu.
Date not stamped
on images even
when Date
•
•
The current shooting mode does not support
Date stamp.
The date cannot be stamped on movies.
stamp is enabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
171
Problem
Cause/Solution
A
Screen for setting
time zone and
date is displayed
when the camera
is turned on.
The clock battery is exhausted; all settings were
restored to their default values.
The camera
settings reset.
When Autofocus mode is set to Full-time AF or
while in some shooting modes, the camera may
produce an audible focusing sound.
The camera
makes sound.
Shooting Issues
Problem
Cause/Solution
Disconnect the HDMI cable or USB cable.
A
Cannot switch to
shooting mode.
•
A button, Shutter-release button, or b(e)
button.
Cannot take
pictures or record
movies.
•
•
When menus are displayed, press the d
button.
The flash is charging while the flash lamp is
flashing.
•
•
The battery is exhausted.
auto selector mode, Close-up scene mode, or
macro mode.
The camera
cannot focus.
•
•
•
The subject is hard to focus on.
Set AF assist in the setup menu to Auto.
Turn the camera off and then on again.
–
•
•
•
Use the flash.
Increase the ISO sensitivity value.
Enable Photo VR when shooting still images.
Enable Movie VR when recording movies.
Use a tripod to stabilize the camera (using the
self-timer at the same time is more effective).
Images are
blurred.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
172
Problem
Cause/Solution
A
Bright specks
appear in images The flash is reflecting off particles in the air. Set the
captured with
flash.
flash mode setting to W (off).
•
•
•
The flash mode is set to W (off).
A function that restricts the flash is enabled.
Flash does not
fire.
•
•
Digital zoom is set to Off in the setup menu.
Digital zoom cannot be used with certain
shooting modes or when using certain settings in
other functions.
Digital zoom
cannot be used.
Image mode not
available.
A function that restricts Image mode is enabled.
Off is selected for Shutter sound in Sound
settings in the setup menu. No sound is produced
with some shooting modes and settings, even
when On is selected.
No sound when
the shutter is
released.
Off is selected for AF assist in the setup menu. AF-
assist illuminator may not light depending on the
position of the focus area or shooting mode, even
when Auto is selected.
AF-assist
illuminator does
not light.
Images appear
smeared.
The lens is dirty. Clean the lens.
Colors are
unnatural.
White balance or hue is not adjusted properly.
The subject is dark and the shutter speed is too
slow, or ISO sensitivity is too high. Noise can be
reduced by:
Randomly spaced
bright pixels
(“noise”) appear in
image.
•
Using the flash
Specifying a lower ISO sensitivity setting
•
•
•
•
•
•
•
The flash mode is set to W (off).
The flash window is blocked.
The subject is beyond the range of the flash.
Adjust exposure compensation.
Increase ISO sensitivity.
mode or set the flash mode setting to X (fill flash).
Images are too
dark
(underexposed).
Download from Www.Somanuals.com. All Manuals Search And Download.
173
Problem
Cause/Solution
A
Images are too
bright
Adjust exposure compensation.
(overexposed).
Unexpected
Use any scene mode other than Night portrait,
and change the flash mode to any setting other
than V (auto with red-eye reduction) and try
taking the picture again.
results when flash
set to V (auto
with red-eye
reduction).
•
•
In some shooting conditions, facial skin tones
may not be softened.
For images containing four or more faces, try
using the Skin softening effect in Glamour
retouch in the playback menu.
Skin tones are not
softened.
It may take more time to save images in the
following situations:
•
When the noise reduction function is in
operation, such as when shooting in a dark
environment
–
•
•
When the flash mode is set to V (auto with
red-eye reduction)
When taking images in the following scene
modes:
Saving images
takes time.
-
-
-
-
Hand-held in Night portrait
Hand-held in Night landscape
HDR set to ON in Backlighting
Easy panorama
•
•
shooting
When using continuous shooting mode
–
A ring-shaped
belt or rainbow-
colored stripe
appears in the
monitor or
When shooting with backlighting or when a very
strong light source (such as sunlight) is in the frame,
a ring-shaped belt or rainbow-colored stripe
(ghosting) may occur. Change the position of the
light source, or frame the picture so that the light
source does not enter the frame, and try again.
images.
Download from Www.Somanuals.com. All Manuals Search And Download.
174
Playback Issues
Problem
Cause/Solution
A
•
This camera may not be able to play back images
saved with another make or model of digital
camera.
File cannot be
•
–
–
This camera cannot play back movies recorded
with another make or model of digital camera.
This camera may not be able to play back data
edited on a computer.
played back.
•
•
•
Playback zoom cannot be used with movies.
When zooming in on a small-sized image, the
zoom ratio shown on the screen may differ from
the actual zoom ratio of the image.
This camera may not be able to zoom in on
images captured with another make or model of
digital camera.
Cannot zoom in
on image.
•
•
already been edited may not be edited again.
•
There is not enough free space on the memory
card or in the internal memory.
This camera is unable to edit images captured
with other cameras.
Editing functions used for images are not
available for movies.
–
–
–
Cannot edit
images.
•
•
•
•
This camera cannot rotate images captured with
another make or model of digital camera.
Images edited using Data imprint cannot be
rotated.
–
Cannot rotate
image.
•
A computer or printer is connected to the
camera.
–
Images are not
displayed on TV.
•
•
The memory card contains no images.
Remove the memory card to play back images in
the internal memory.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
175
Problem
Cause/Solution
The camera is off.
A
•
•
–
The battery is exhausted.
–
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
•
The USB cable is not correctly connected.
•
•
The camera is not recognized by the computer.
The computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
–
The PictBridge
startup screen is
not displayed
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed and
it may be impossible to print images when Auto is
when the camera selected for Charge by computer in the setup
is connected to a menu. Set Charge by computer to Off and
printer.
reconnect the camera to the printer.
Images to be
printed are not
displayed.
•
•
The memory card contains no images.
Remove the memory card to print images in the
internal memory.
–
The camera cannot be used to select the paper size
in the following situations, even when printing from
a PictBridge-compatible printer. Use the printer to
select the paper size.
Cannot select
paper size with
the camera.
–
•
The printer does not support the paper sizes
specified by the camera.
•
The printer automatically selects the paper size.
Download from Www.Somanuals.com. All Manuals Search And Download.
176
Location Data Functions
Problem
Cause/Solution
A
•
The camera may not be able to identify the
location in some shooting environments. To
use the location data functions, use the
camera as much as possible in an open-air
area.
Unable to identify the
location or it takes time
to identify the location.
•
When positioning for the first time or when
positioning was unable to be performed for
about two hours, it takes a few minutes to
calculate the location data.
When z or y is displayed on the shooting
screen, the location data is not recorded.
Before shooting images, check the location
data reception.
Unable to record
location data on shot
images.
The acquired location data may deviate in
some shooting environments. When there is a
significant difference in the signals from the
positioning satellites, there could be a
Difference between
the actual shooting
location and recorded
location data.
deviation of up to several hundred meters.
The recorded location
name is different from
the intended one or is
not displayed.
The desired landmark name may not be
registered, or a different landmark name may
be registered.
–
–
•
Check the following items:
-
-
Whether the memory card is inserted
Whether the A-GPS file is stored on the
memory card
Unable to update the
A-GPS file.
-
Whether the A-GPS file saved on the
memory card is more recent than the A-
GPS file saved in the camera
-
Whether the A-GPS file is still valid
•
the file from the website once more.
Maps cannot be displayed while the camera is
being charged with the charging AC adapter,
even if the U (map) button is pressed.
Unable to display the
map.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
177
Problem
Cause/Solution
A
When Altimeter/depth gauge of Altitude/
depth options in the location data options
Unable to turn off the menu is set to On, the altimeter or depth
altimeter or depth
gauge.
gauge is always displayed regardless of
Monitor settings in the setup menu.
To turn off the altimeter or depth gauge, set
the Altimeter/depth gauge to Off.
The altitude/water
depth and
atmospheric pressure
icons remain displayed
on the shooting screen.
Set Photo info of Monitor settings in the
setup menu to Hide info.
Even when Altimeter/depth gauge is set to
On, the altimeter or depth gauge is not
displayed in the following situations:
•
When the shutter-release button is pressed
halfway
During shooting in the Easy panorama
scene mode
Unable to display the
altimeter or depth
gauge even when
Altimeter/depth
gauge is set to On.
–
•
•
•
During movie recording
When a subject is registered using Subject
tracking of AF area mode
When a message is being displayed
•
–
The water depth will be displayed as 0 m if the
camera is not submerged underwater when
the Underwater scene mode is selected.
Water depth shows 0
m
•
options menu is set to Off.
Unable to select Use
location data of Alt./
depth correction in
the location data
•
You cannot select this function unless
signals are received from four or more
satellites and positioning has been
performed.
options menu.
•
The camera is submerged underwater. You
cannot select this function during
underwater shooting.
–
Unable to select
Create log in the
location data options
menu.
•
•
The camera clock has not been set.
Set date and time.
options menu is set to Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
178
Problem
Cause/Solution
A
Unable to select Start The camera is recording log data. To record a
all logs or Start
location log.
log, and end the log currently being recorded.
•
Make sure that a memory card is inserted in
the camera.
•
Up to 36 log data events for location data
logs can be recorded per day whereas up to
34 log data events each for altitude logs and
water depth logs can be recorded per day.
Unable to save log
data.
•
be saved on a single memory card is 200,
which includes up to 100 log data events for
location data logs and up to 100 log data
events for a combined total of altitude logs
and water depth logs. Delete log data that is
no longer required from a memory card or
replace the memory card with a new one.
Unable to select Set
clock from satellite in Record location data in the location data
the location data
options menu.
options menu is set to Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
179
File Names
Images or movies are assigned file names as follows.
File name: DSCN0001.JPG
(1)
(2) (3)
Not shown on the screen of the camera.
•
•
•
•
DSCN: Original still images, movies
SSCN: Small picture copies
RSCN: Cropped copies
FSCN: Images created by an image editing function other
than crop and small picture, movies created by the movie
editing function
(1) Identifier
Assigned in ascending order, starting with “0001” and ending
with “9999.”
(2) File number
(3) Extension
Indicates file format.
•
•
.JPG: Still images
.MOV: Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
180
C Log Data Saved on Memory Cards
The log data is saved in the “NCFL“ folder.
File name : N151115 0 .log
(1)
(2) (3)
Date (last two digits of the year, and the month and day in
YYMMDD format) on which the log recording was started
is assigned automatically.
(1) Date
To manage log data events that are recorded on the same
date, ID numbers are assigned automatically in an
ascending order, starting from “0”, in the order in which
they are recorded.
(2) Identification
number
•
Location data logs: A total of 36 alphanumeric
characters consisting of the numbers 0 to 9 or the
letters A to Z.
•
Altitude/water depth logs: A total of 34 alphanumeric
characters consisting of the numbers 0 to 9 or the
letters A to Z except I and O.
Signifies the file type
.log
.lga
.lgb
Location data logs
(3) Extension
Altitude logs
Water depth logs
•
•
Location data logs: Up to 36 files can be recorded a day and up to 100 files
can be recorded on a memory card.
Altitude/water depth logs: Up to 34 files can be recorded each per day and a
combined total of 100 files can be recorded on a memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
181
Optional Accessories
Battery Charger MH-65
Battery
charger
It takes about 2 hours and 30 minutes to charge a fully exhausted
battery.
AC Adapter EH-62F
(connect as shown)
AC adapter
Make sure that the power connector cable is fully inserted in the
power connector slot before inserting the AC adapter into the
battery chamber.
•
While using the AC adapter, the battery-chamber/memory card
slot cover cannot be closed. Do not pull the cord of the AC
adapter.
If the cord is pulled, the connection between the camera and
power source is interrupted, and the camera turns off.
SB-N10 Underwater Speedlight
To attach it to the COOLPIX AW130, you need an SR-CP10A
Underwater underwater fiber-optic cable adapter (available separately), an SC-
speedlight
N10A underwater fiber-optic cable (available separately), and an
attachment instructions.
Availability may vary with country or region.
See our website or brochures for the latest information.
Download from Www.Somanuals.com. All Manuals Search And Download.
182
Attaching the Underwater Speedlight
You can use an SB-N10 underwater speedlight attached to the COOLPIX
setup menu to On when shooting.
7
8
4
9
1
2
3
10
5
SC-N10A underwater fiber-optic
cable (available separately)
SK-N10A underwater bracket
(available separately)
6
13
12
11
SR-CP10A underwater fiber-optic cable adapter (available separately)
Mounting guide
Stay
Connector (connects to SB-N10)
Cable
1
2
3
4
5
6
7
8
9
Grip lock screw
Grip
Connector (connects to SR-
CP10A)
10
Camera lock screw
11
12
13
Strap hook
Fiber-optic connector
Adapter lock screw socket
Case/adapter lock screw
M4 hex key
Download from Www.Somanuals.com. All Manuals Search And Download.
183
Make sure to turn off the camera and underwater speedlight before attaching.
1
Attach the camera to the
underwater fiber-optic cable
adapter.
•
Align the camera lock screw of the cable
adapter with the tripod socket of the
camera, and securely tighten the screw.
B Notes
Make sure to properly thread the camera lock
screw of the adapter in the tripod socket of
the camera, and do not apply excessive force
when tightening. Otherwise, you may damage the tripod socket.
2
3
Attach the underwater
speedlight to the grip of the
underwater bracket.
•
Securely tighten the mounting bolt of the
underwater speedlight.
With the camera secured, attach
the cable adapter to the
underwater bracket.
•
Align the case/adapter lock screw of the
bracket with the cable adapter lock screw
socket, and tighten the screw lightly so
that the adapter and bracket can move.
Download from Www.Somanuals.com. All Manuals Search And Download.
184
4
Attach the underwater fiber-optic
cable to the cable adapter.
•
Connect the end of the cable with the
longer straight section (the end that
connects to SR-CP10A) to the cable
adapter’s fiber-optic connector.
•
After connecting, pass the cable through
the adapter’s two cable holders.
5
6
Slide the cable adapter that is
attached to the camera and cable
until it contacts the stay
mounting guide.
•
Make sure that the cable does not come
loose from the cable holders.
Fully tighten the case/adapter
lock screw of the bracket to
secure the cable adapter.
7
Pass the underwater fiber-optic
cable through the grip of the
bracket, from bottom to top.
Download from Www.Somanuals.com. All Manuals Search And Download.
185
8
9
Open the sensor cover of the
underwater speedlight.
Connect one end of the cable
(the end that connects to SB-N10)
to the underwater speedlight’s
fiber-optic connector.
•
To detach the underwater speedlight or camera from the underwater
bracket, perform the above procedure in reverse.
Download from Www.Somanuals.com. All Manuals Search And Download.
186
USER LICENSE AGREEMENT FOR MAP DATA
AND LOCATION NAME DATA
The map data and location name data that are stored in this digital camera (“Data”) is
provided for your personal, internal use only and not for resale. It is protected by
copyright, and is subject to the following terms and conditions which are agreed to
by you, on the one hand, and Nikon Corporation (“Nikon”) and its licensors (including
their licensors and suppliers) on the other hand.
Terms and Conditions
Personal Use Only. You agree to use this Data together with this digital camera and
the image data taken by the digital camera for the solely personal, non-commercial
purposes for which you were licensed, and not for service bureau, time-sharing or
other similar purposes.
Accordingly, but subject to the restrictions set forth in the following paragraphs, you
agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse
engineer any portion of this Data, and may not transfer or distribute it in any form, for
any purpose, except to the extent permitted by mandatory laws.
Restrictions. Except where you have been specifically licensed to do so by Nikon, and
without limiting the preceding paragraph, you may not (a) use this Data with any
products, systems, or applications installed or otherwise connected to or in
communication with vehicles, capable of vehicle navigation, positioning, dispatch,
real time route guidance, fleet management or similar applications; or (b) with or in
communication with any positioning devices or any mobile or wireless-connected
electronic or computer devices, including without limitation cellular phones,
palmtop and handheld computers, pagers, and personal digital assistants or PDAs.
Warning. The Data may contain inaccurate or incomplete information due to the
passage of time, changing circumstances, sources used and the nature of collecting
comprehensive geographic data, any of which may lead to incorrect results.
No Warranty. This Data is provided to you “as is,” and you agree to use it at your own
risk. Nikon and its licensors (and their licensors and suppliers) make no guarantees,
representations or warranties of any kind, express or implied, arising by law or
otherwise, including but not limited to, content, quality, accuracy, completeness,
effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to
be obtained from this Data, or that the Data or server will be uninterrupted or error-
free.
Disclaimer of Warranty: NIKON AND ITS LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY,
PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-
INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty
exclusions, so to that extent the above exclusion may not apply to you.
Download from Www.Somanuals.com. All Manuals Search And Download.
187
Disclaimer of Liability: NIKON AND ITS LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND
OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND
OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH
MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY
LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE
INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN
ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF NIKON OR ITS
LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some
States, Territories and Countries do not allow certain liability exclusions or damages
limitations, so to that extent the above may not apply to you.
Export Control. You agree not to export from anywhere any part of the Data or any
direct product thereof except in compliance with, and with all licenses and approvals
required under, applicable export laws, rules and regulations, including but not
limited to the laws, rules and regulations administered by the Office of Foreign Assets
Control of the U.S. Department of Commerce and the Bureau of Industry and Security
of the U.S. Department of Commerce. To the extent that any such export laws, rules
or regulations prohibit Nikon and its licensors from complying with any of its
obligations hereunder to deliver or distribute Data, such failure shall be excused and
shall not constitute a breach of this Agreement.
Entire Agreement. These terms and conditions constitute the entire agreement
between Nikon (and its licensors, including their licensors and suppliers) and you
pertaining to the subject matter hereof, and supersedes in their entirety any and all
written or oral agreements previously existing between us with respect to such
subject matter.
Governing Law. The above terms and conditions shall be governed by the laws of
the Japan, without giving effect to (i) its conflict of laws provisions, or (ii) the United
Nations Convention for Contracts for the International Sale of Goods, which is
explicitly excluded; provided that in the event that the laws of the Japan is not
deemed applicable to this Agreement for any reason in the country where you
obtained the Data, this Agreement shall be governed with the laws of the country
where you obtained the Data. You agree to submit to the jurisdiction of Japan for
any and all disputes, claims and actions arising from or in connection with the Data
provided to you hereunder.
Download from Www.Somanuals.com. All Manuals Search And Download.
188
Government End Users. If the Data supplied by HERE is being acquired by or on
behalf of the United States government or any other entity seeking or applying rights
similar to those customarily claimed by the United States government, the Data is a
"commercial item" as that term is defined at 48 C.F.R. ("FAR") 2.101, is licensed in
accordance with the End-User Terms under which this Data was provided, and each
copy of the Data delivered or otherwise furnished shall be marked and embedded as
appropriate with the following "Notice of Use," and shall be treated in accordance
with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME:
HERE
CONTRACTOR (MANUFACTURER/ SUPPLIER) ADDRESS:
425 West Randolph Street, Chicago, Illinois 60606
This Data is a commercial item as defined in
FAR 2.101 and is subject to the End-User
Terms under which this Data was provided.
© 2014 HERE - All rights reserved.
If the Contracting Officer, federal government agency, or any federal official refuses to
use the legend provided herein, the Contracting Officer, federal government agency,
or any federal official must notify HERE prior to seeking additional or alternative rights
in the Data.
Notices related to licensed software copyright holders.
•
Map data and location name data for Japan
© 2014 ZENRIN CO., LTD. All rights reserved.
This service uses map and POI data of ZENRIN CO., LTD.
“ZENRIN” is a registered trademark of ZENRIN CO., LTD.
•
Map data and location name data except for Japan
© 1987-2014 HERE
All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
189
Austria: Bundesamt für Eich- und Vermessungswesen
Belgium: - Distribution & Copyright CIRB
Croatia/Cyprus/Estonia/Latvia/Lithuania/Moldova/Poland/Slovenia/Ukraine:
EuroGeographics
Denmark: Contains data that is made available by the Danish Geodata Agency (FOT) Retrieved by
HERE 01/2014
Finland: Contains data from the National Land Survey of Finland Topographic Database 06/2012.
(Terms of Use available at
(http://www.maanmittauslaitos.fi/en/
NLS_open_data_licence_version1_20120501
)).
Contains data that is made available by Itella in accordance with the terms available at
www.itella.fi/liitteet/palvelutjatuotteet/yhteystietopalvelut/
(http://
uusi_postal_code_services_service_description_and_terms_of_use.pdf). Retrieved by HERE 09/2013
France: source: IGN 2009 – BD TOPO
Germany: Die Grundlagendaten wurden mit Genehmigung der zuständigen Behörden entnommen
Contains content of „ BayrischeVermessungsverwaltung –
(
www.geodaten.bayern.de
)
“, licensed in
accordance with
(
http://creativecommons.org/licenses/by/3.0/legalcode
)
Contains content of “LGL,
(
www.lgl-bw.de
)
“, licensed in accordance with
(http://
creativecommons,.org/licenses/by/3.0/legalcode
)
Contains content of “Stadt Köln – offenedaten-koeln.de”, licensed in accordance with
(http://
creativecommons.org/licenses/by/3.0/legalcode
)
Contains Content of “Geoportal Berlin / ATKIS Basis-DLM”, licensed in accordance with
(http://
www.stadtentwicklung.berlin.de/geoinformation/download/nutzIII.pdf
)
Contains Content of “Geoportal Berlin / Karte von Berlin 1:5000 (K5-Farbausgabe)”, licensed in
accordance with
(
http://www.stadtentwicklung.berlin.de/geoinformation/download/nutzIII.pdf
)
Great Britain: Contains Ordnance Survey data Crown copyright and database right 2010
Contains Royal Mail data Royal Mail copyright and database right 2010
Greece: Copyright Geomatics Ltd.
Italy: La Banca Dati Italiana è stata prodotta usando quale riferimento anche cartografia numerica ed
al tratto prodotta e fornita dalla Regione Toscana.
Contains data from Trasporto Passeggeri Emilia-Romagna- S.p.A.
Includes content of Comune di Bologna licensed under
(http://creativecommons.org/licenses/by/3.0/
legalcode
)
and updated by licensee July 1, 2013.
Includes content of Comune di Cesena licensed under
(http://creativecommons.org/licenses/by/3.0/
legalcode
)
and updated by licensee July 1, 2013.
Includes contents of Ministero della Salute, and Regione Sicilia, licensed under
(http://www.formez.it/
iodl/
)
and updated by licensee September 1, 2013.
Includes contents of Provincia di Enna, Comune di Torino, Comune di Pisa, Comune di Trapani,
Comune di Vicenza, Regione Lombardia, Regione Umbria, licensed under
(http://www.dati.gov.it/
iodl/2.0/
)
and updated by licensee September 1, 2013.
Includes content of GeoforUs, licensed in accordance with
(http://creativecommons.org/licenses/by/
3.0/legalcode
).
Includes content of Comune di Milano, licensed under
(http://creativecommons.org/licenses/by/2.5/
it/legalcode
)
and updated by licensee November 1, 2013.
Includes content of the “Comunità Montana della Carnia”, licensed under
(http://www.dati.gov.it/iodl/
2.0/)
and updated by licensee December 1, 2013.
Includes content of “Agenzia per la mobilità” licensed under
(http://creativecommons.org/licenses/
by/3.0/legalcode
)
and updated by licensee January 1, 2014.
Includes content of Regione Sardegna, licensed under
by licensee May 1, 2014.
(
http://www.dati.gov.it/iodl/2.0/
)
and updated
Includes content of CISIS, licensed under
(http://creativecommons.org/licenses/by/2.5/legalcode
).
Norway: Copyright 2000; Norwegian Mapping Authority
Includes data under the Norwegian licence for Open Government data (NLOD), available at
(http://
data.norge.no/nlod/en/1.0
)
Download from Www.Somanuals.com. All Manuals Search And Download.
190
Contains information copyrighted by Kartverket, made available in accordance with
(http://
creativecommons.org/licenses/by/3.0/no/
).
Contains data under the Norwegian licence for Open Government data (NLOD) distributed by
Norwegian Public Roads Administration (NPRA)
Portugal: Source: IgeoE – Portugal
Spain: Información geográfica propiedad del CNIG
Contains data that is made available by the Generalitat de Catalunya Government in accordance with
the terms available at
(
http://www.gencat.cat/web/eng/avis_legal.htm
). Retrieved by HERE 05/2013.
Contains content of Centro Municipal de Informatica – Malaga, licensed in accordance with
(http://
creativecommons.org/licenses/by /3.0/legalcode
).
Contains content of Administración General de la Comunidad Autónoma de Euskadi, licensed in
accordance with
(
http://creativecommons.org/licenses/by/3.0/legalcode
)
Contains data made available by the Ayuntamiento de Santander, licensed in accordance with
(http://
creativecommons.org/licenses/by/3.0/es/legalcode.es
)
Contains data of Ajuntament de Sabadell, licensed per
(http://creativecommons.org/licences/by/3.0/
legalcode), updated 4/2013
Sweden: Based upon electronic data National Land Survey Sweden.
Contains public data, licensed under Go Open v1.0, available at
(http://data.goteborg.se/goopen/
Avtal%20GoOpen%201.0.0.pdf
)
Switzerland: Topografische Grundlage: Bundesamt für Landestopographie
United Kingdom: Contains public sector information licensed under the Open Government Licence
v1.0 (see for the license
(
http://www.nationalarchives.gov.uk/doc/open-government-licence/
))
Adapted from data from the office for National Statistics licensed under the Open Government
Licence v.1.0
Canada: This data includes information taken with permission from Canadian authorities, including
© Her Majesty, Queen's Printer for Ontario, Canada Post, GeoBase, Department of Natural
Resources Canada. All rights reserved.
Mexico: Fuente: INEGI (Instituto Nacional de Estadística y Geografía.)
United States: ©United States Postal Service 2013. Prices are not established, controlled or
approved by the United States Postal Service. The following trademarks and registrations are
owned by the USPS: United States Postal Service, USPS, and ZIP+4.
Includes data available from the U.S. Geological Survey.
Australia: Copyright. Based on data provided under license from PSMA Australia Limited
(www.psma.com.au).
Product incorporates data which is 2013 Telstra Corporation Limited, Intelematics Australia Pty Ltd
and HERE International LLC.
Nepal: Copyright Survey Department, Government of Nepal.
Sri Lanka: This product incorporates original source digital data obtained from the Survey
Department of Sri Lanka
2009 Survey Department of Sri Lanka
The data has been used with the permission of the Survey Department of Sri Lanka
Israel: Survey of Israel data source
Jordan: Royal Jordanian Geographic Centre.
Mozambique: Certain Data for Mozambique provided by Cenacarta 2013 by Cenacarta
Nicaragua: The Pacific Ocean and Caribbean Sea maritime borders have not been entirely defined.
Northern land border defined by the natural course of the Coco River (also known as Segovia River or
Wangki River) corresponds to the source of information available at the moment of its representation.
Réunion: source: IGN 2009 - BD TOPO
Ecuador: INSTITUTO GEOGRAFICO MILITAR DEL ECUADRO
AUTORIZACION N° IGM-2011-01- PCO-01 DEL 25 DE ENERO DE 2011
Guadeloupe: source: IGN 2009 - BD TOPO
Guatemala: Aprobado por el INSTITUTO GEOGRAFICO NACIONAL – Resolución del IGN No 186-2011
French Guiana: source: IGN 2009 - BD TOPO
Martinique: source: IGN 2009 - BD TOPO
Download from Www.Somanuals.com. All Manuals Search And Download.
191
Specifications
Nikon COOLPIX AW130 Digital Camera
Type
Compact digital camera
16.0 million (Image processing may reduce the
number of effective pixels.)
Number of effective pixels
1/2.3-in. type CMOS; approx. 16.76 million total
pixels
Image sensor
Lens
NIKKOR lens with 5× optical zoom
4.3–21.5 mm (angle of view equivalent to that of
24–120 mm lens in 35mm [135] format)
Focal length
f/-number
f/2.8–4.9
Construction
12 elements in 10 groups (2 ED lens elements)
Up to 4× (angle of view equivalent to that of
approx. 480 mm lens in 35mm [135] format)
Digital zoom magnification
Vibration reduction
Autofocus (AF)
Lens shift and electronic VR
Contrast-detect AF
•
[W]: Approx. 50 cm (1 ft 8 in.)–,
[T]: Approx. 50 cm (1 ft 8 in.)–
Macro mode: Approx. 1 cm (0.4 in.)–
angle position)
•
(wide-
Focus range
(All distances measured from center of front surface
of lens)
Face priority, manual with 99 focus areas, center,
subject tracking, target finding AF
Focus-area selection
Monitor
7.5 cm (3-in.), approx. 921k-dot, wide viewing angle
OLED monitor with anti-reflection coating, and 5-
level brightness adjustment
Frame coverage
(shooting mode)
Approx. 98% horizontal and vertical (compared to
actual picture)
Frame coverage
(playback mode)
Approx. 100% horizontal and vertical (compared to
actual picture)
Download from Www.Somanuals.com. All Manuals Search And Download.
192
Storage
Media
Internal memory (approx. 473 MB), SD/SDHC/SDXC
memory card
File system
File formats
DCF and Exif 2.3 compliant
Still images: JPEG
Movies: MOV (Video: H.264/MPEG-4 AVC, Audio:
LPCM stereo)
•
•
•
•
•
•
•
•
16M (High) [4608 × 3456P]
16M [4608 × 3456]
8M [3264 × 2448]
4M [2272 × 1704]
2M [1600 × 1200]
VGA [640 × 480]
16:9 (12M) [4608 × 2592]
1:1 [3456 × 3456]
Image size
(pixels)
ISO sensitivity
(Standard output
sensitivity)
•
•
ISO 125–1600
ISO 3200, 6400 (available when using Auto
mode)
Exposure
Matrix, center-weighted (digital zoom less than 2×),
spot (digital zoom 2× or more)
Metering mode
Programmed auto exposure and exposure
compensation
Exposure control
Shutter
(–2.0 – +2.0 EV in steps of 1/3 EV)
Mechanical and CMOS electronic shutter
•
•
1/1500–1 s
1/4000 s (maximum speed during high-speed
continuous shooting)
Speed
•
4 s (Fireworks show scene mode)
Electronically-controlled preset aperture (–1 AV)
and ND filter (–2 AV) selections
Aperture
Range
Self-timer
Flash
3 steps (f/2.8, f/4.1, f/8.2 [W])
Can be selected from 10 s and 2 s
Range (approx.)
(ISO sensitivity: Auto)
[W]: 0.5–5.2 m (1 ft 8 in.–17 ft)
[T]: 0.5–4.5 m (1 ft 8 in.–14 ft)
Flash control
TTL auto flash with monitor preflashes
Download from Www.Somanuals.com. All Manuals Search And Download.
193
Interface
USB connector
Micro-USB connector (do not use any USB cable
other than the UC-E21), Hi-Speed USB
•
Supports Direct Print (PictBridge)
HDMI output connector
Wi-Fi (Wireless LAN)
Standards
HDMI micro connector (Type D)
IEEE 802.11b/g/n (standard wireless LAN protocol)
Approx. 10 m (10 yd)
Range (line of sight)
Operating frequency
2412–2462 MHz (1-11 channels)
IEEE 802.11b: 5 Mbps
IEEE 802.11g: 17 Mbps
IEEE 802.11n: 17 Mbps
Data rates (actual
measured values)
Security
OPEN/WPA2
Infrastructure
Access protocols
16 cardinal points (position correction using 3-axis
acceleration sensor, automatic correction for the
deviated angle, and automatic offset adjustment)
Electronic compass
Location data
•
GPS
Receiving frequency: 1575.42 MHz
Geodetic system: WGS 84
GLONASS
•
Receiving frequency: 1598.0625 - 1605.3750 MHz
Geodetic system: WGS 84
Barometer
Altimeter
Display range: Approx. 500 - 4600 hPa
Display range: Approx. −300 - +4500 m (−984 -
+14,760 ft)
Depth gauge
Display range: Approx. 0 - 35 m (0 - 114 ft)
Arabic, Bengali, Bulgarian, Chinese (Simplified and
Traditional), Czech, Danish, Dutch, English, Finnish,
French, German, Greek, Hindi, Hungarian,
Indonesian, Italian, Japanese, Korean, Marathi,
Norwegian, Persian, Polish, Portuguese (European
and Brazilian), Romanian, Russian, Serbian, Spanish,
Swedish, Tamil, Telugu, Thai, Turkish, Ukrainian,
Vietnamese
Supported languages
One Rechargeable Li-ion Battery EN-EL12 (included)
AC Adapter EH-62F (available separately)
Power sources
Charging time
Approx. 2 h 20 min (when using Charging AC
Adapter EH-71P/EH-71PCH and when no charge
remains)
Download from Www.Somanuals.com. All Manuals Search And Download.
194
Battery life1
Still images
Approx. 370 shots when using EN-EL12
Movies (actual battery
life for recording)2
Approx. 1 h 10 min (1080/30p) when using EN-EL12
Approx. 1 h 20 min (1080/25p) when using EN-EL12
Tripod socket
1/4 (ISO 1222)
Approx. 110.4 × 66.0 × 26.8 mm (4.4 × 2.6 × 1.1 in.)
(excluding projections)
Dimensions (W × H × D)
Approx. 221 g (7.8 oz) (including battery and
memory card)
Weight
Operating environment
Temperature
Humidity
−10°C - +40°C (14°F - 104°F) (for land use)
0°C - 40°C (32°F - 104°F) (for underwater use)
85% or less (no condensation)
JIS/IEC protection class 8 (IPX8) equivalent (under
our testing conditions)
Capacity to shoot images underwater up to a depth
Waterproof
of 30 m (100 ft) and for 60 minutes
JIS/IEC protection class 6 (IP6X) equivalent (under
our testing conditions)
Dustproof
Cleared our testing conditions3 compliant with MIL-
STD 810F Method 516.5-Shock
Shockproof
•
Unless otherwise stated, all figures assume a fully-charged battery and an
ambient temperature of 23 3°C (73.4 5.4°F) as specified by the Camera
and Imaging Products Association (CIPA).
1
2
Battery life may vary depending on conditions of use, such as the interval between
shots or the length of time that menus and images are displayed.
Individual movie files cannot exceed 4 GB in size or 29 minutes in length.
Recording may end before this limit is reached if camera temperature becomes
elevated.
Dropped from a height of 210 cm (7 ft) onto a surface of 5 cm (2 in.) thick plywood
(changes in appearance, such as paint peeling off and deformation of the drop
shock portion and waterproof performance are not subject to the test).
These tests do not guarantee that the camera will be free from damage or trouble
under all conditions.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
195
Rechargeable Li-ion Battery EN-EL12
Type
Rechargeable lithium-ion battery
Rated capacity
Operating temperature
Dimensions (W × H × D)
Weight
DC 3.7 V, 1050 mAh
0°C–40°C (32°F–104°F)
Approx. 32 × 43.8 × 7.9 mm (1.3 × 1.7 × 0.3 in.)
Approx. 22.5 g (0.8 oz)
Charging AC Adapter EH-71P/EH-71PCH
Rated input
AC 100–240 V, 50/60 Hz, MAX 0.2 A
Rated output
DC 5.0 V, 1.0 A
Operating temperature
0°C–40°C (32°F–104°F)
Approx. 55 × 22 × 54 mm (2.2 × 0.9 × 2.2 in.)
(excluding plug adapter)
For Argentina: Approx. 55 × 63 × 59 mm (2.2 × 2.5 ×
2.4 in.)
For Brazil: Approx. 55 × 67 × 59 mm (2.2 × 2.7 ×
2.4 in.)
Dimensions (W × H × D)
Weight
Approx. 48 g (1.7 oz) (excluding plug adapter)
For Argentina: Approx. 73 g (2.6 oz)
For Brazil: Approx. 70 g (2.5 oz)
• Nikon will not be held liable for any errors this manual may contain.
• The appearance of this product and its specifications are subject to change
without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
196
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and
approved for use in this camera.
•
Memory cards with an SD Speed Class rating of 6 or faster are
recommended for recording movies. When using a memory card with a
lower Speed Class rating, movie recording may stop unexpectedly.
SDXC memory
SD memory card
SDHC memory card
card
SanDisk
TOSHIBA
Panasonic
Lexar
–
4 GB, 8 GB, 16 GB, 32 GB 64 GB, 128 GB
4 GB, 8 GB, 16 GB, 32 GB 64 GB
4 GB, 8 GB, 16 GB, 32 GB 64 GB
–
2 GB
–
8 GB, 16 GB, 32 GB
64 GB, 128 GB
•
•
Contact the manufacturer for details on the above cards. We cannot guarantee
camera performance when using memory cards made by other manufacturers.
If you use a card reader, make sure that it is compatible with your memory card.
Trademark Information
• Windows is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
• Adobe, the Adobe logo, and Reader are either trademarks or registered
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
• SDXC, SDHC, and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Download from Www.Somanuals.com. All Manuals Search And Download.
197
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the
Wi-Fi Alliance.
• Android and Google Play are trademarks or registered trademarks of
Google, Inc.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in
the United States and in other countries.
• All other trade names mentioned in this manual or the other
documentation provided with your Nikon product are the trademarks or
registered trademarks of their respective holders.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the
personal and non-commercial use of a consumer to (i) encode video in
compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC
video that was encoded by a consumer engaged in a personal and non-
commercial activity and/or was obtained from a video provider licensed to
provide AVC video. No license is granted or shall be implied for any other
use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
FreeType License (FreeType2)
• Portions of this software are copyright © 2012 The FreeType Project
(http://www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
• Portions of this software are copyright © 2015 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights
reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
198
Index
Symbols
x Scene auto selector mode
A
................................................................. 12, 21 Action button ................................... 2, 20
C Scene mode .................................... 23 Action control........................................ 20
M Short movie show mode ......... 38 AF assist................................................... 125
A Auto mode..................................... 42 A-GPS File............................................... 110
cPlayback mode.............................. 15 Altimeter................................................ 140
C List by date mode......................... 61 Altitude................................................... 140
J Wi-Fi options menu
................................................. 78, 108, 147 Altitude/depth options ................. 118
.............................................................. 78, 110 Atmospheric pressure................... 140
z Setup menu............................ 78, 119 Auto flash ................................................. 45
g(Telephoto)......................................... 14 Auto mode ...................................... 18, 42
f(Wide-angle).................................... 14 Auto off............................................ 13, 128
jHelp....................................................... 23 Autofocus mode....................... 91, 105
b(emovie-record) button
B
Battery chamber................................. 182
Battery level indicator......................... 11
Battery-chamber/memory card slot
Brightness............................................... 121
C
Download from Www.Somanuals.com. All Manuals Search And Download.
199
Calendar Display.................................. 60 Electronic compass.......................... 116
F
Cloudy......................................................... 82
Connecting to smart devices
Flash off ..................................................... 45
Fluorescent.............................................. 82
Copying images.................................... 97
Crop.............................................................. 70
Current settings ................................. 108
D
Data imprint ........................................... 68 Focus lock ................................................. 55
Date and time ............................. 10, 119 Food u............................................... 23, 25
Daylight...................................................... 82 Formatting....................................... 6, 129
Daylight saving time........ 10, 11, 119 Frame rate.............................................. 107
Delete................................................. 16, 63 Full-frame playback............................. 15
Depth gauge........................................ 140 Full-time AF.................................. 91, 105
Direct print............................................ 153 simultaneously...................................... 56
G
H
E
HDMI micro connector
Easy panorama playback................. 32
Download from Www.Somanuals.com. All Manuals Search And Download.
200
Help .............................................................. 23 Movie recording............................ 19, 71
High-contrast monochrome F
......................................................................... 33 Multi selector .................................... 2, 78
High-speed continuous.................. 84
N
I
Image mode........................................... 80 Nikon Transfer 2.................................. 158
Image review........................................ 121 Nostalgic sepia P....................... 33
Incandescent .......................................... 82 ................................................................. 11, 81
Internal memory...................................... 7 Number of shots.................................. 92
O
Optical zoom........................................... 14
Optional accessories........................ 182
ISO sensitivity.......................................... 87
L
List by date mode................................ 61
P
M
Macro mode........................................... 47 Photo VR................................................. 124
Map actions................................. 20, 128 PictBridge.................................... 151, 153
Map display............................... 132, 144 Playback ..................................................... 15
Memory card slot.................................... 6 Playback mode....................................... 15
Microphone................................................. 1 Playback zoom...................................... 59
Micro-USB connector ................ 1, 150 Pop l...................................................... 33
Monitor......................................... 2, 3, 164 Portrait b................................................. 23
Monitor settings ................................. 121 Power switch..................................... 1, 20
Movie editing ................................ 75, 76 Power-on lamp................................ 1, 20
Movie light ............................................ 106 Preset manual........................................ 83
Movie options..................................... 100 Pressing halfway ................................... 14
Download from Www.Somanuals.com. All Manuals Search And Download.
201
Print ..................................... 151, 154, 155 Single AF........................................ 91, 105
Printer............................................. 151, 153 Skin softening........................................ 52
Printing shooting dates................. 123 Slide show................................................ 95
Protect........................................................ 96 Slow sync.................................................. 45
Small picture........................................... 69
Q
Smart portrait mode.......................... 34
Smile timer ............................................... 35
Speaker .......................................................... 2
Special effects mode.......................... 33
Strap................................................................ ii
Strap for land use.................................... ii
Quick effects........................................... 64
Quick retouch......................................... 65
R
Recording slow motion movies
Remaining movie recording time
Reset all .................................................... 131
Restore default settings ................ 108
S
T
Scene mode ............................................ 23
Set clock from satellite.................... 115
Short movie show mode................. 38
Shutter speed......................................... 14
Telephoto.................................................. 14
Time difference................................... 119
U
V
Single.......................................................... 84 View log............................ 115, 144, 145
Download from Www.Somanuals.com. All Manuals Search And Download.
202
W
Water depth ......................................... 140
White balance ........................................ 82
Wide-angle............................................... 14
Wind noise reduction..................... 107
Wireless LAN......................................... 146
Wireless Mobile Utility.................... 146
Z
Zooming in/out .................................... 14
Download from Www.Somanuals.com. All Manuals Search And Download.
203
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
YP5C03(11)
6MN54711-03
Download from Www.Somanuals.com. All Manuals Search And Download.
|