DIGITAL CAMERA
Reference Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Read This First
Thank you for purchasing the Nikon COOLPIX L30 digital camera. Before using the camera,
information provided in this manual. After reading, please keep this manual handy and refer
to it to enhance your enjoyment of your new camera.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
•
Symbols and Conventions
To make it easier to find the information you need, the following symbols and conventions
are used in this manual:
Icon
Description
This icon indicates cautions and information that should be read before using
the camera.
B
C
This icon indicates notes and information that should be read before using the
camera.
These icons indicate other pages containing relevant information;
E: “Reference Section”, F: “Technical Notes and Index.”
A/E/F
•
•
•
SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this manual.
The setting at the time of purchase is referred to as the “default setting.”
The names of menu items displayed in the camera monitor, and the names of buttons or
messages displayed on a computer monitor appear in bold.
•
•
In this manual, images are sometimes omitted from monitor display samples so that
monitor indicators can be more clearly shown.
Illustrations and monitor content shown in this manual may differ from the actual product.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. Visit the site below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, AC adapters,
and cables) certified by Nikon specifically for use with this Nikon digital camera are engineered and
proven to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of
paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the
prior permission of the government was obtained, the copying or reproduction of unused postage
stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents
stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies and
private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies, and photographs is governed by national and international
copyright laws. Do not use this product for the purpose of making illegal copies or to infringe
copyright laws.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or
built-in camera memory does not completely erase the original image data. Deleted files can
sometimes be recovered from discarded storage devices using commercially available software,
potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is
the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
the setup menu. Care should be taken to avoid injury or damage to property when physically
destroying data storage devices.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
WARNINGS
Turn off in the event of
malfunction
Should you notice smoke or an
the camera or AC adapter break open
as the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the batteries.
unusual smell coming from the
camera or AC adapter, unplug the AC
adapter and remove the batteries
immediately, taking care to avoid
burns. Continued operation could
result in injury. After removing or
disconnecting the power source, take
the equipment to a Nikon-authorized
service representative for inspection.
Do not use the camera or AC
adapter in the presence of
flammable gas
Do not use electronic equipment in
the presence of flammable gas, as this
could result in explosion or fire.
Do not disassemble
Handle the camera strap with
care
Never place the strap around the neck
of an infant or child.
Touching the internal parts of the
camera or AC adapter could result in
injury. Repairs should be performed
only by qualified technicians. Should
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep out of reach of children
Particular care should be taken to
prevent infants from putting the
batteries or other small parts into their
mouths.
Observe caution when
handling batteries
Batteries may leak or explode if
improperly handled. Observe the
following precautions when handling
batteries for use in this product:
Do not remain in contact with
the camera, battery charger,
or AC adapter for extended
periods while the devices are
on or in use
• Before replacing the batteries, turn
the product off. If you are using an
AC adapter, be sure it is unplugged.
• Use only the batteries approved for
combine old and new batteries or
batteries of different makes or types.
• If Nikon rechargeable Ni-MH
batteries EN-MH2 (EN-MH2-B2 or
EN-MH2-B4) are purchased
separately, charge and use each of
them as a set. Do not combine
batteries from different pairs.
• The EN-MH2 rechargeable batteries
are for use with Nikon digital
cameras only, and are compatible
with COOLPIX L30.
Parts of the devices become hot.
Leaving the devices in direct contact
with the skin for extended periods may
result in low-temperature burns.
Do not leave the product
where it will be exposed to
extremely high temperatures,
such as in an enclosed
automobile or in direct
sunlight
Failure to observe this precaution
could cause damage or fire.
• Insert batteries in the correct
orientation.
• Do not short or disassemble
batteries or attempt to remove or
break battery insulation or casing.
• Do not expose batteries to flame or
to excessive heat.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not immerse in or expose to
water.
• Do not transport or store with metal
objects such as necklaces or
hairpins.
• Do not handle the power cable or
go near the battery charger during
lightning storms. Failure to observe
this precaution could result in
electric shock.
• Do not damage, modify, forcibly tug
or bend the power cable, place it
under heavy objects, or expose it to
heat or flame. Should the insulation
be damaged and the wires become
exposed, take it to a Nikon-
authorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
• Do not handle the plug or battery
charger with wet hands. Failure to
observe this precaution could result
in electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or result in overheating or
fire.
• Batteries are prone to leakage when
fully discharged. To avoid damage
to the product, be sure to remove
the batteries when no charge
remains.
• Discontinue use immediately should
you notice any change in the
batteries, such as discoloration or
deformation.
• If liquid from damaged batteries
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
Observe the following
precautions when handling
the Battery Chargers
(available separately)
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Avoid contact with liquid
crystal
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
Handle moving parts with care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
Turn the power off when
using inside an airplane or the
hospital
Turn the power off while inside the
airplane during take off or landing.
Do not use wireless network functions
while in the air.
Follow the instructions of the hospital
when using while in a hospital.
The electromagnetic waves emitted by
this camera may disrupt the electronic
systems of the airplane or the
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. The flash should be no
less than 1 m (3 ft 4 in.) from the
subject. Particular care should be
observed when photographing
infants.
instruments of the hospital. If you are
using an Eye-Fi card, remove it from
the camera before boarding an aircraft
or entering a hospital.
Do not operate the flash with
the flash window touching a
person or object
Failure to observe this precaution
could result in burns or fire.
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an
experienced radio/television
technician for help.
Notice for Customers in the
U.S.A.
Federal Communications
Commission (FCC) Radio
Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or
more of the following measures:
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Interface Cables
Notice for Customers in Europe
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
This symbol indicates that
electrical and electronic
equipment is to be collected
separately.
The following apply only to
users in European countries:
Notice for customers in the State of
California
• This product is designated for
separate collection at an
WARNING
appropriate collection point. Do not
dispose of as household waste.
• Separate collection and recycling
helps conserve natural resources
and prevent negative consequences
for human health and the
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
environment that might result from
incorrect disposal.
1300 Walt Whitman Road Melville,
New York 11747-3064 USA
Tel: 631-547-4200
• For more information, contact the
retailer or the local authorities in
charge of waste management.
Notice for customers in Canada
CAN ICES-3 B / NMB-3 B
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
This symbol on the batteries
indicates that the batteries
are to be collected separately.
The following apply only to
users in European countries:
• All batteries, whether marked with
this symbol or not, are designated
for separate collection at an
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction ................................................... ii Using the Camera ...................................... 12
Connecting the Camera to a TV,
Turn the Camera On and Set the Display
Language, Date, and Time................................ 8
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
D-Lighting:
Enhancing Brightness and Contrast... E26
Glamour Retouch:
Scene Mode
(Shooting Suited to Scenes)..................... E4
Smart Portrait Mode
Enhancing Human Faces.......................... E27
Small Picture:
(Capturing Images of Smiling Faces).... E8
Functions That Can Be Set Using the Multi
Selector.......................................................... E11
Adjusting Brightness
Reducing the Size of an Image............. E29
Connecting the Camera to a TV
(Viewing Images on a TV)........................ E31
Connecting the Camera to a Printer
(Direct Print)................................................. E32
Options Available in the Shooting
Menus............................................................. E42
(Exposure Compensation)....................... E16
Functions That Cannot Be Used
Simultaneously........................................... E19
xvi
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu
(for A (Auto) Mode)................................ E43
Image Mode Settings
Print Date
(Image Size and Quality)........................... E43
Print Order
(Creating a DPOF Print Order)............... E51
Copy (Copy Between Internal Memory
and Memory Card) ....................................... E57
(Imprinting Date and Time) .................... E65
xvii
Download from Www.Somanuals.com. All Manuals Search And Download.
xviii
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
The Camera Body
1
2 3 4
5
Lens cover closed
10
8
7
6
9
1
2
Shutter-release button.................................... 13
5
6
7
8
Zoom control........................................................ 14
Lens cover
Lens
Power connector cover (for connection
9
3
4
1
Download from Www.Somanuals.com. All Manuals Search And Download.
The Monitor
The information that is displayed changes depending on the camera’s settings and state of
use.
By default, information is displayed when the camera is first turned on and when you operate
the camera, and turns off after a few seconds (when Photo info is set to Auto info in
Shooting Mode
2
31
30
29
5
1
3
4
6
10
7
28
10
8
27
9
11
12
13
10
26
25
2 9 m 0 s
9 9 9
24
14
16
+1.0
23
22
15
1 / 2 5 0
F 3.2
19
18 17
9 9
99
99
9
9
9
21 20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
5
6
7
8
9
Shooting mode.................................................... 20
Focus indicator..................................................... 13
Focus area (face detection,
21
Continuous shooting mode
27
Movie recording time remaining
14
Number of exposures remaining
16
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Mode
1
2
1 5 / 0 5 / 2 0 1 4 1 2 : 0 0
9 9 9 9 . J P G
3
7
16
15
4
5
6
14
13
8
9
9 9 9 / 9 9 9
9 9 9 / 9 9 9
9 9 9 9 / 9 9 9 9
1 m 0 s
1 m 0 s
12 11
10
a
b
1
2
3
4
5
6
7
8
9
(a) Current image number/
total number of images
(b) Movie length
10
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for Shooting
Insert the Batteries and Memory Card
1
Open the battery-chamber/memory card slot
cover.
3
2
•
Hold the camera upside down to prevent the batteries from
falling out.
1
2
Insert the batteries and memory
card.
•
Confirm that the positive (+) and
negative (–) battery terminals are
oriented correctly and insert the batteries.
Confirm the correct orientation and slide
the memory card in until it clicks into
place.
•
B Be Careful to Insert the Memory
Card in Correct Direction
Memory card slot
Inserting the memory card upside down
or backwards could damage the camera
and the memory card.
3
Close the battery-chamber/memory card slot
cover.
1
2
Applicable Batteries
•
•
•
Two LR6/L40 (AA-size) alkaline batteries (included batteries)
Two FR6/L91 (AA-size) lithium batteries
Two EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries
6
Download from Www.Somanuals.com. All Manuals Search And Download.
B Notes About the Batteries
• Do not combine old and new batteries or batteries of different makes or types.
• Batteries with the following defects cannot be used:
Batteries with peeling
Batteries with insulation that
does not cover the area around
the negative terminal
Batteries with a flat
negative terminal
B Formatting Memory Cards
The first time you insert a memory card that has been used in another device into this camera, make
sure to format it with this camera. Insert the card into the camera, press the d button, and select
Removing the Batteries or Memory Card
Turn the camera off and make sure that the power-on lamp and the
monitor have turned off, and then open the battery-chamber/
memory card slot cover.
1 2
Gently push the memory card into the camera (1) to partially eject
the card (2).
B High Temperature Caution
The camera, batteries, and memory card may be hot immediately after using the camera.
Internal Memory and Memory Cards
Camera data, including images and movies, can be saved either in the camera’s internal
memory or on a memory card. To use the camera’s internal memory, first remove the memory
card.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the Camera On and Set the Display Language,
Date, and Time
When the camera is turned on for the first time, the language-selection screen and the date
and time setting screen for the camera clock are displayed.
•
If you exit without setting the date and time, O will flash when the shooting screen is
displayed.
1
Press the power switch to turn on the camera.
•
•
The monitor turns on when the camera is turned on.
To turn the camera off, press the power switch again.
Language
2
3
Use the multi selector HI to select
the desired language and press the
k button.
Cancel
Time zone and date
Use HI to select Yes and press the k
button.
Choose time zone and
set date and time?
Yes
No
Cancel
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Use JK to select your home time
zone and press the k button.
London, Casablanca
•
Press H to turn on daylight saving time
(W is displayed above the map).
Press I to turn it off.
Back
5
6
Use HI to select the date format and press the k button.
Date and time
Set the date and time, and press the
k button.
D
01
M
Y
•
Use JK to select a field and then use HI to set the date
and time.
01
2014
00
00
•
Select the minute field and press the k button to confirm
the setting.
Edit
7
8
When the confirmation screen is displayed, use HI to select Yes and
press the k button.
Press the A (shooting mode) button.
Press this button in
shooting mode for
shooting-mode
selection menu
.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Use HI to select Easy auto mode and press
the k button.
Easy auto mode
Battery level indicator
•
•
The camera enters the shooting mode and
you can take images in Easy auto mode.
While shooting, you can check the battery
level indicator and the number of exposures
remaining.
Shooting
mode icon
5 m 0 s
1 4 0 0
-
Battery level indicator
b: The battery level is high.
B: The battery level is low. Prepare to
replace the batteries.
Shooting screen
-
Number of exposures remaining
The number of images that can be taken is
displayed. C is displayed when no memory
card is inserted in the camera, and images
are saved in the internal memory.
Number of exposures
remaining
10
Download from Www.Somanuals.com. All Manuals Search And Download.
C The Auto Off Function
• If you do not operate the camera for about 30 seconds, the monitor turns off, the camera enters
standby mode, and the power-on lamp flashes. The camera turns off after about three minutes in
standby mode.
• The amount of time until the camera enters standby mode can be changed using the Auto off
• While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
C Changing the Language Setting and the Date and Time Setting
• You can change these settings using the Language and Time zone and date settings in the
• You can enable or disable daylight saving time in the z setup menu by selecting Time zone and
date followed by Time zone. Press the multi selector K and then H to enable daylight saving
time and move the clock forward one hour, or I to disable daylight saving time and move the
clock back one hour.
C The Clock Battery
• The camera’s clock is powered by a built-in backup battery. The backup battery is charged when
the main batteries are inserted into the camera or when the camera is connected to an optional
AC adapter, and it can run the clock for several days after about ten hours of charging.
• If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed
On and Set the Display Language, Date, and Time” for more information.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Camera
Shooting with Easy Auto Mode
1
Hold the camera steady.
•
Keep fingers and other objects away from the lens, flash,
AF-assist illuminator, microphone, and speaker.
•
When taking pictures in the “tall” (portrait) orientation,
make sure the flash is above the lens.
Zoom out
2
Frame the picture.
Zoom in
•
Move the zoom control to change the zoom position
•
When the camera automatically determines the scene
mode, the shooting mode icon changes.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press the shutter-release button halfway
•
•
•
When the subject is in focus, the focus area glows green.
Multiple focus areas can glow green.
When you are using digital zoom, the camera focuses on
the subject in the center of the frame and the focus area is
not displayed. When the camera has focused, the focus
•
If the focus area or focus indicator flashes, the camera is
unable to focus. Modify the composition and try pressing
the shutter-release button halfway again.
1 / 2 5 0
F 3.2
Focus area
Without lifting your finger, press the shutter-
release button the rest of the way down
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Zoom
When you move the zoom control, the zoom lens position
changes.
Zoom out
Zoom in
•
To zoom in closer to the subject: Move toward g
(telephoto)
•
To zoom out and view a larger area: Move toward f
(wide-angle)
When you turn the camera on, the zoom moves to the
maximum wide-angle position.
•
•
A zoom indicator is displayed at the top of the monitor
when the zoom control is moved.
Digital zoom, which allows you to further magnify the
subject up to approximately 4× the maximum optical
zoom ratio, can be activated by moving and holding the
zoom control toward g when the camera is zoomed in to
the maximum optical zoom position.
Optical Digital
zoom zoom
C Digital Zoom and Interpolation
While using digital zoom, the image quality decreases due to
interpolation when the zoom is increased beyond the V position.
The Shutter-release Button
To set focus and exposure (shutter speed and aperture value),
press the shutter-release button lightly (halfway) until you feel a
slight resistance. Focus and exposure remain locked while the
shutter-release button is pressed halfway.
Press halfway
Press the shutter-release button all the way to release the shutter
and take an image.
Do not use force when pressing the shutter-release button, as this
may result in camera shake and blurred images. Press the button
gently.
Press all the way
14
Download from Www.Somanuals.com. All Manuals Search And Download.
B Notes About Easy Auto Mode
• Depending upon shooting conditions, the camera may not select the desired scene mode. In this
• When the digital zoom is in effect, the scene mode changes to U.
B Notes About Saving Images and Recording Movies
The indicator showing the number of exposures remaining or the indicator showing the maximum
movie length flashes while images are being saved or while a movie is being recorded. Do not open
the battery-chamber/memory card slot cover or remove the batteries or memory card while
an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
C When Using a Tripod
We recommend using a tripod to stabilize the camera in the following situations.
• When shooting in dim lighting
• When using the telephoto setting
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Back Images
1
Press the c (playback) button to enter
playback mode.
•
If you press and hold down the c (playback) button while
the camera is turned off, the camera turns on in playback
mode.
2
Use the multi selector HIJK to select an
image to display.
1 5 / 0 5 / 2 0 1 4 1 5 : 3 0
0 0 0 4 . J P G
•
To return to shooting mode, press the A button or
shutter-release button.
4 /
4
Full-frame Playback
•
Move the zoom control toward g (i) in
full-frame playback mode to zoom in on the
3 . 0
•
Move the zoom control toward f (h) in
full-frame playback mode to display a list of
1 /
2 0
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete Images
1
Press the l (delete) button to delete the
image currently displayed in the monitor.
2
3
Use the multi selector HI to select Current
image and press the k button.
Delete
•
•
Current image: The image currently displayed is deleted.
Erase selected images: Multiple images that you select
Current image
Erase selected images
All images
•
•
All images: All images are deleted.
To exit without deleting, press the d button.
Select Yes and press the k button.
•
Deleted images cannot be recovered.
Erase
1
image?
Yes
No
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the Erase Selected Images Screen
Erase selected images
1
Use the multi selector JK to select an image
to be deleted, and then use H to display c.
•
•
To undo the selection, press I to remove c.
full-frame playback or f (h) to switch to thumbnail
playback.
Back
ON/OFF
2
Add c to all images that you want to delete and then press the
k button to confirm the selection.
•
A confirmation dialog is displayed. Follow the instructions displayed in the monitor.
C Deleting the Last Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was saved.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Flash and Self-timer
You can use the multi selector to set frequently used functions such as the flash and self-timer.
You can set the following functions using HIJK in the shooting screen.
Flash mode
Self-timer
Exposure compensation
Macro mode
•
•
You can select the flash mode to match the shooting conditions.
If you select ON, the camera releases the shutter 10 seconds after you press the shutter-
release button.
•
•
Use macro mode when taking close-up images.
You can adjust overall image brightness.
The functions that are available vary with the shooting mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Features
Changing the Shooting Mode
The following shooting modes are available.
•
The camera automatically selects the optimum scene mode when you frame an image,
making it even easier to take images using settings that suit the scene.
•
•
Camera settings are optimized according to the scene that you select.
When the camera detects a smiling face, you can take an image automatically without
pressing the shutter-release button (smile timer).
You can also use the skin softening option to smooth the skin tones of human faces.
•
Used for general shooting.
Settings can be adjusted to suit the shooting conditions and the type of shot you want to
capture.
1
Press the A (shooting mode) button in the
shooting screen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Use the multi selector HI to select a
shooting mode and press the k button.
Easy auto mode
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Playing Back Movies
1
Display the shooting screen.
•
Check the remaining amount of movie recording time.
5 m 0 s
1 4 0 0
Movie recording time
remaining
2
3
Press the b (e movie-record) button to start
movie recording.
2 m 3 0 s
Press the b (e movie-record) button again to stop recording.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select a movie in full-frame playback mode
and press the k button.
1 5 / 0 5 / 2 0 1 4 1 5 : 3 0
0 0 1 0 . AV I
•
•
•
Movies are indicated by the movie options icon.
1 0 s
Movie options
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Use the multi selector and k button to navigate the menus.
The following menus are available.
•
•
•
•
Available by pressing the d button in the shooting screen.
Allows you to change image size and quality, continuous shooting settings, etc.
Available by pressing the d button when viewing images in full-frame playback mode
or thumbnail playback mode. Allows you to edit images, play slide shows, etc.
Available by pressing the d button in the shooting screen.
Allows you to change movie recording settings.
Allows you to adjust basic camera functions such as date and time, display language, etc.
1
Press the d (menu) button.
2
Press the multi selector J.
•
The menu is displayed.
•
The current menu icon is displayed in yellow.
Shooting menu
Image mode
White balance
Continuous
Color options
Menu icons
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3
5
Use HI to select the desired
menu icon.
4
6
Press the k button.
•
The menu options become selectable.
•
The menu is changed.
Set up
Welcome screen
Welcome screen
Time zone and date
Monitor settings
Print date
Time zone and date
Monitor settings
Print date
Electronic VR
Motion detection
AF assist
Electronic VR
Motion detection
AF assist
Use HI to select a menu
option, and then press the
k button.
Use HI to select the setting,
and then press the k button.
•
•
The setting you selected is applied.
When you are finished using the menu,
press the d button.
•
The settings for the option you selected
are displayed.
Print date
Print date
Date
Date
Date and time
Off
Date and time
Off
•
Certain menu options cannot be set depending on the current shooting mode or the state
of the camera.
•
When a menu is displayed, you can switch to shooting mode by pressing the shutter-
release button, A (shooting mode) button, or b (e movie-record) button.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a TV, Computer, or Printer
Connection Methods
You can enhance your enjoyment of images and movies by connecting the camera to a TV,
computer, or printer.
USB/audio/video output connector
Insert the plug straight.
Open the connector cover.
•
•
•
Before connecting the camera to an external device, make sure the remaining battery level
is sufficient and turn the camera off. Before disconnecting, make sure to turn the camera
off.
If the AC Adapter EH-65A (available separately) is used, this camera can be powered from
an electrical outlet. Do not use any other make or model of AC adapter as it may cause the
camera to heat up or malfunction.
For information about the connection methods and subsequent operations, refer to the
documentation included with the device in addition to this document.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing images on a TV
Images and movies captured with the camera can be viewed on a TV.
Connection method: Connect the video and audio plugs of the Audio Video
Cable EG-CP14 to the TV’s input jacks.
Viewing and organizing images on a computer
You can transfer images to a computer to perform simple retouching and
manage image data.
Connection method: Connect the camera to the computer’s USB port with
the USB Cable UC-E16.
•
Before connecting to a computer, install ViewNX 2 on the computer
Printing images without using a computer
If you connect the camera to a PictBridge-compatible printer, you can print
images without using a computer.
Connection method: Connect the camera directly to the printer’s USB port
with the USB Cable UC-E16.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ViewNX 2
Install ViewNX 2 to upload, view, edit, and share photos and movies.
Installing ViewNX 2
An Internet connection is required.
For system requirements and other information, see the Nikon website for your region.
1
Download the ViewNX 2 installer.
Start the computer and download the installer from:
http://nikonimglib.com/nvnx/
2
3
4
Double-click the downloaded file.
Follow the on-screen instructions.
Exit the installer.
Click Yes (Windows) or OK (Mac).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Images to the Computer
1
Choose how images will be copied to the computer.
Choose one of the following methods:
•
•
•
SD card slot: If your computer is equipped with an SD card slot, the card can be inserted
directly in the slot.
SD card reader: Connect a card reader (available separately from third-party suppliers) to
the computer and insert the memory card.
Direct USB connection: Turn the camera off and ensure that the memory card is inserted
in the camera. Connect the camera to the computer using the USB cable. Turn the camera
on.
C Transferring Images Saved in the Internal Memory to the Computer
Perform one of the methods listed below.
memory to the memory card, and then transfer the images saved in the memory card to the
computer.
• Connect the camera to the computer without inserting a memory card into the camera.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
•
When using Windows 7
If the dialog shown at right is displayed, follow
the steps below to select Nikon Transfer 2.
1
Under Import pictures and videos, click
Change program. A program selection
dialog will be displayed; select Import File
using Nikon Transfer 2 and click OK.
Double-click Import File.
2
If the memory card contains a large number of images, it may take a while for Nikon Transfer 2
to start. Wait until Nikon Transfer 2 starts.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.
2
Transfer images to the computer.
•
Click Start Transfer.
Start Transfer
At default settings, all the images on the memory card will be copied to the computer.
•
30
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Terminate the connection.
•
If you are using a card reader or card slot, choose the appropriate option in the computer
operating system to eject the removable disk corresponding to the memory card, and then
remove the card from the card reader or card slot. If the camera is connected to the
computer, turn the camera off and disconnect the USB cable.
Viewing Images
Start ViewNX 2.
•
Images are displayed in ViewNX 2 when transfer is
complete.
•
Consult online help for more information on
using ViewNX 2.
C Starting ViewNX 2 Manually
• Windows: Double-click the ViewNX 2 shortcut on the desktop.
• Mac: Click the ViewNX 2 icon in the Dock.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Section
The Reference Section provides detailed information and hints about using the camera.
Shooting
G (Easy Auto) Mode.................................................................................... E3
A (Auto) Mode...........................................................................................E10
Focusing .........................................................................................................E20
Playback
Playback Zoom.............................................................................................E23
Editing Still Images .....................................................................................E25
E1
Download from Www.Somanuals.com. All Manuals Search And Download.
Movies
Recording Movies........................................................................................E38
Playing Back Movies ...................................................................................E40
Menu
The Smart Portrait Menu...........................................................................E49
The Playback Menu.....................................................................................E51
The Movie Menu ..........................................................................................E58
The Setup Menu...........................................................................................E60
Additional Information
Error Messages .............................................................................................E76
File Names......................................................................................................E79
Optional Accessories..................................................................................E80
E2
Download from Www.Somanuals.com. All Manuals Search And Download.
G (Easy Auto) Mode
The camera automatically selects the optimum scene mode when you frame an image,
making it even easier to take images using settings that suit the scene.
Enter shooting mode
M
A
(shooting mode) button
M
G
(easy auto) mode M k button
When the camera selects a scene mode, the shooting mode icon displayed in the shooting
screen changes to that for the scene mode currently enabled.
e
f
h
g
i
j
U
Portrait
Landscape
Night portrait
Night landscape
Close-up
Backlighting
Other scenes
Functions Available in G (Easy Auto) Mode
•
•
•
•
E3
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
When a scene is selected, camera settings are automatically optimized for the selected scene.
Enter shooting mode M A (shooting mode) button M b (second icon from the top*)
M K M HIJK M select a scene M k button
*
The icon of the last scene selected is displayed.
2
1
3
b
f
i
l
O
Portrait
(default setting)
c
Landscape
1
d
z
k
n
Sports
e
Night portrait
1
1
1, 3
Party/indoor
Z Beach
Snow
h Sunset
2, 3
2, 3
2, 3
1
1
Dusk/dawn
j
m
Night landscape
Close-up
u
Food
1
1
1
Museum
Fireworks show
Black and white copy
o
Backlighting
Pet portrait
1
2
3
The camera focuses on the area in the center of the frame.
The camera focuses at infinity.
Use of a tripod is recommended, because the shutter speed is slow.
To View a Description (Help Display) of Each Scene
g (j) to view a description of that scene. To return to the
original screen, move the zoom control toward g (j) again.
Landscape
E4
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips and Notes
d Sports
•
•
•
While the shutter-release button is held all the way down, the camera shoots up to about 6
images continuously at a rate of about 1.1 fps (when Image mode is set to x 5152×3864).
The frame rate for continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
Focus, exposure, and hue are fixed at the values determined with the first image in each series.
e Night portrait
•
The flash always fires.
f Party/indoor
•
To avoid the effects of camera shake, hold the camera steady.
k Close-up
•
which it can focus.
u Food
•
which it can focus.
•
You can adjust hue by using the multi selector HI. The hue
setting is saved in the camera’s memory even after the camera is
turned off.
5 m 0 s
1 4 0 0
E5
Download from Www.Somanuals.com. All Manuals Search And Download.
l Museum
•
The camera captures a series of up to ten images while the shutter-release button is held all the
way down, and the sharpest image in the series is automatically selected and saved (BSS (Best
Shot Selector)).
The flash does not fire.
•
m Fireworks show
•
The shutter speed is fixed at about four seconds.
n Black and white copy
•
o Backlighting
•
The flash always fires.
E6
Download from Www.Somanuals.com. All Manuals Search And Download.
O Pet portrait
•
When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it.
By default, the shutter is automatically released when the camera detects a dog or cat face (pet
portrait auto release).
•
From the screen displayed after O Pet portrait is selected, select Single or Continuous.
-
-
Single: Whenever the camera detects a dog or cat face, it captures one image.
Continuous: Whenever the camera detects a dog or cat face, it captures three images
continuously.
B Pet Portrait Auto Release
• Press the multi selector J (n) to change the Pet portrait auto release settings.
- Y: The shutter is automatically released when the camera detects a dog or cat face.
- k: The camera does not release the shutter automatically, even if a dog or cat face is
detected. Press the shutter-release button. The camera also detects human faces when k is
selected.
• Pet portrait auto release is set to k after five bursts have been taken.
• Shooting is also possible by pressing the shutter-release button, regardless of the Pet portrait
auto release setting. When Continuous is selected, you can take images continuously while
holding down the shutter-release button all the way.
B Focus Area
• When the camera detects a face, the face is displayed inside a
yellow border. When the camera acquires focus on a face
displayed inside a double border (focus area), the double border
turns green. If no faces are detected, the camera focuses on the
subject in the center of the frame.
5 m 0 s
• In some shooting conditions, the pet face may not be detected
and other subjects may be displayed inside a border.
1 4 0 0
E7
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart Portrait Mode (Capturing Images of Smiling Faces)
When the camera detects a smiling face, you can take an image automatically without
option to smooth the skin tones of human faces.
Enter shooting mode M A (shooting mode) button M F Smart portrait mode M k button
1
2
Frame the picture.
•
Point the camera at a human face.
Without pressing the shutter-release button, wait for the subject to
smile.
•
If the camera detects that the face framed by the double border is smiling, the shutter is
automatically released.
•
Whenever the camera detects a smiling face, it automatically releases the shutter.
3
End automatic shooting.
•
Perform one of the operations listed below to end shooting.
-
-
Set Smile timer to Off.
Press the A button and select a different shooting mode.
B Notes About Smart Portrait Mode
Under some shooting conditions, the camera may be unable to detect faces or detect smiles
C When the Self-timer Lamp Flashes
When using smile timer, the self-timer lamp flashes when the camera detects a face and flashes
quickly immediately after the shutter is released.
E8
Download from Www.Somanuals.com. All Manuals Search And Download.
A (Auto) Mode
Used for general shooting. Settings can be adjusted to suit the shooting conditions and the
type of shot you want to capture.
Enter shooting mode M A (shooting mode) button M A (auto) mode M k button
•
The camera focuses on the area in the center of the frame.
Functions Available in A (Auto) Mode
•
•
•
•
•
E10
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions That Can Be Set Using the Multi Selector
Using the Flash
When using A (auto) mode and other shooting modes, you can select the flash mode to
match the shooting conditions.
1
2
Press the multi selector H (X).
press the k button.
Auto
•
If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
E11
Download from Www.Somanuals.com. All Manuals Search And Download.
Available Flash Modes
Auto
U
The flash fires when necessary, such as in dim lighting.
•
The flash mode icon on the shooting screen is displayed only immediately after the
setting is made.
Auto with red-eye reduction
V
W
Off
The flash does not fire.
•
We recommend using a tripod to stabilize the camera when shooting in dark
surroundings.
Fill flash
X
The flash fires whenever an image is taken. Use to “fill-in” (illuminate) shadows and backlit
subjects.
Slow sync
Y
Suited to evening and night portraits that include background scenery. The flash fires
when necessary to illuminate the main subject; slow shutter speeds are used to capture
background at night or under dim lighting.
E12
Download from Www.Somanuals.com. All Manuals Search And Download.
C The Flash Lamp
The status of the flash can be confirmed by pressing the shutter-
release button halfway.
• On: The flash fires when you press the shutter-release button all the
way down.
• Flashing: The flash is charging. The camera cannot shoot images.
• Off: The flash does not fire when an image is taken.
If the battery level is low, the monitor turns off while the flash is charging.
C The Flash Mode Setting
• The setting applied in A (auto) mode is saved in the camera’s memory even after the camera is
turned off.
C Red-eye Reduction
If the camera detects red eye while saving an image, the affected area is processed to reduce red-
eye before the image is saved.
Note the following when shooting:
• More time than usual is required to save images.
• Red-eye reduction may not produce the desired results in all situations.
• In some cases, red-eye reduction may be applied to areas of an image unnecessarily. In these
cases, select another flash mode and take the image again.
E13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Self-timer
The camera is equipped with a self-timer that releases the shutter about ten seconds after
you press the shutter-release button.
1
2
Press the multi selector J (n).
Select ON and press the k button.
Self-timer
•
If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
When the shooting mode is Pet portrait scene mode, Y
cannot be used.
•
3
4
Frame the picture and press the shutter-
release button halfway.
•
Focus and exposure are set.
Press the shutter-release button the
rest of the way down.
9
•
Countdown starts. The self-timer lamp flashes
and then glows steadily about one second
before the shutter is released.
•
•
When the shutter is released, the self-timer is set
to OFF.
To stop the countdown, press the shutter-
release button again.
1 / 2 5 0
F 3.2
C The Self-timer Setting
E14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Macro Mode
Use macro mode when taking close-up images.
1
2
Press the multi selector I (p).
Select ON and press the k button.
Macro mode
•
If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
3
Move the zoom control to set the zoom ratio
to a position where F and the zoom indicator
glow green.
•
When the zoom ratio is set to a position where F and the zoom indicator glow green, the
camera can focus on subjects as close as approximately 30 cm (1 ft) from the lens.
When the zoom is at the position where G is displayed, the camera can focus on subjects
as close as approximately 10 cm (4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C The Macro Mode Setting
• The setting applied in A (auto) mode is saved in the camera’s memory even after the camera is
turned off.
E15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Brightness (Exposure Compensation)
You can adjust overall image brightness.
1
2
Press the multi selector K (o).
Select a compensation value and press the
k button.
Exposure compensation
+ 2 . 0
+ 0 . 3
•
•
•
To brighten the image, set a positive (+) value.
To darken the image, set a negative (–) value.
The compensation value is applied, even without pressing
the k button.
- 2 . 0
C Exposure Compensation Value
• The setting applied in A (auto) mode is saved in the camera’s memory even after the camera is
turned off.
E16
Download from Www.Somanuals.com. All Manuals Search And Download.
Default Settings
Default settings for each shooting mode are described below.
Exposure
compensation
Flash
Self-timer
Macro
1
2
G (easy auto)
U
Off
Off
0.0
Scene
3
3
3
3
3
3
3
3
3
3
3
3
b
c
d
e
f
Z
z
(portrait)
V
Off
Off
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
On
On
Off
3
(landscape)
(sports)
W
3
3
W
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
4
5
(night portrait)
(party/indoor)
(beach)
V
V
U
(snow)
U
3
h (sunset)
W
3
i
j
k
u
(dusk/dawn)
W
3
(night landscape)
(close-up)
W
W
3
(food)
W
3
l
m
n
o
O
(museum)
W
3
3
8
3
3
3
3
(fireworks show)
W
Off
Off
Off
Off
Off
0.0
(
black and white copy
)
W
0.0
0.0
0.0
0.0
0.0
3
(backlighting)
(pet portrait)
X
Off
Off
Off
Off
3
6
W
Y
Off
Off
7
F (smart portrait)
U
U
A (auto)
E17
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
The camera automatically selects the flash mode appropriate for the scene it has selected. W (off)
can be selected manually.
The setting cannot be changed. Automatically changes to macro mode when the camera selects
Close-up.
3
4
The setting cannot be changed.
The setting cannot be changed. The flash mode setting is fixed at fill flash with slow sync and red-
eye reduction.
5
6
7
8
Slow sync with red-eye reduction flash mode may be used.
Cannot be used when Blink proof is set to On.
Can be set when Smile timer is set to Off.
E18
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions That Cannot Be Used Simultaneously
Some functions cannot be used with other menu options.
Restricted function
Option
Description
When a setting other than Single is selected, the
flash cannot be used.
Flash mode
When Blink proof is set to On, the flash cannot be
used.
When Smile timer is selected, the self-timer
cannot be used.
Self-timer
When Multi-shot 16 is selected, digital zoom
cannot be used.
Digital zoom
When Multi-shot 16 is selected, the Image mode
setting is fixed at L (image size: 2560 × 1920
pixels).
Image mode
When Black-and-white, Sepia, or Cyanotype is
White balance
Auto.
When the self-timer is used, the setting changes to
Single.
Continuous
When a setting other than Single is selected,
Electronic VR
Electronic VR is disabled.
When the flash fires, Motion detection is disabled.
Motion detection
Shutter sound
When Multi-shot 16 is selected, Motion
detection is disabled.
When a setting other than Single is selected, the
shutter sound is disabled.
E19
Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing
The focus area varies depending on the shooting mode.
Using Face Detection
In the following shooting modes, the camera uses face
detection to automatically focus on human faces.
•
•
•
5 m 0 s
1 4 0 0
If the camera detects more than one face, a double border is
displayed around the face that the camera focuses on, and
single borders are displayed around the other faces.
If no faces are detected when the shutter-release button is pressed halfway, the camera
focuses on the subject in the center of the frame.
B Notes About Face Detection
• The camera’s ability to detect faces depends on a variety of factors, including the direction in
which the faces are looking.
• The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
E20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Skin Softening
When the shutter is released while using one of the shooting modes listed below, the camera
detects human faces and processes the image to soften facial skin tones (up to three faces).
•
•
•
B Notes About Skin Softening
• It may take more time than usual to save images after shooting.
• Under some shooting conditions, the desired skin softening results may not be achieved, and skin
softening may be applied to areas of the image where there are no faces.
Subjects Not Suitable for Autofocus
The camera may not focus as expected in the following situations. In some rare cases, the
subject may not be in focus despite the fact that the focus area or the focus indicator glows
green:
•
•
Subject is very dark
Objects of sharply differing brightness are included in the scene (e.g. the sun behind the
subject makes that subject appear very dark)
•
No contrast between the subject and surroundings (e.g. a portrait subject wearing a white
shirt is standing in front of a white wall)
•
•
Several objects are at different distances from the camera (e.g. the subject is inside a cage)
Subjects with repeating patterns (window blinds, buildings with multiple rows of similarly
shaped windows, etc.)
•
Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus
several times, or focus on another subject positioned at the same distance from the camera as
E21
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus Lock
Focus lock shooting is recommended when the camera does not activate the focus area that
contains the desired subject.
1
2
Position the subject in the center of
the frame and press the shutter-
release button halfway.
•
Confirm that the focus area glows green.
•
Focus and exposure are locked.
1 / 2 5 0
F 3.2
3
4
Without lifting your finger, recompose the
picture.
•
Make sure to maintain the same distance between the
camera and the subject.
1
/
2
5
0
F
33.2
Press the shutter-release button the rest of
the way down to take the picture.
E22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Zoom
image.
g
(i)
1 5 / 0 5 / 2 0 1 4 1 5 : 3 0
0 0 0 4 . J P G
f
(h)
4 /
4
3 . 0
Image is displayed full-frame.
Image is zoomed in.
•
•
•
You can change the zoom ratio by moving the zoom control toward f (h) or g (i).
To view a different area of the image, press the multi selector HIJK.
If you are viewing an image that was captured using face detection or pet detection, the
camera zooms in on the face detected at the time of shooting (except when viewing an
image captured in a series). To zoom in on an area of the image where there are no faces,
adjust the magnification rate and then press HIJK.
•
When a zoomed image is displayed, press the k button to return to full-frame playback
mode.
C Cropping Images
When a zoomed image is displayed, you can press the d button to crop the image to include
E23
Download from Www.Somanuals.com. All Manuals Search And Download.
Thumbnail Playback, Calendar Display
images as thumbnails.
f
(h)
f
(h)
1 /
2 0
1 5 / 0 5 / 2 0 1 4 1 5 : 3 0
0 0 0 1 . J P G
2 0 1 4 0 5
Su
M
Tu
W
Th
1
F
2
Sa
3
4
5
6
7
8
9
10
1112 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
3
g
g
1 /
2 0
(i)
(i)
Full-frame Playback
Thumbnail Playback
Calendar Display
•
•
•
You can change the number of thumbnails displayed by moving the zoom control toward
f (h) or g (i).
While using thumbnail playback mode, press the multi selector HIJK to select an
image and then press the k button to display that image full-frame.
While using calendar display mode, press HIJK to select a date and then press the
k button to display the images captured on that day.
B Notes About Calendar Display
Images captured when the camera’s date is not set are treated as images captured on January 1,
2014.
E24
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
Before Editing Images
You can easily edit images on this camera. Edited copies are saved as separate files.
•
Edited copies are saved with the same shooting date and time as the original.
C Restrictions on Image Editing
When an edited copy is further modified with another editing function, check the following
restrictions.
Editing function used
D-Lighting
Editing functions to use
The glamour retouch, small picture, or crop function can be used.
The D-Lighting, small picture, or crop function can be used.
Glamour retouch
Another editing function cannot be used. When using in
combination with other editing functions, use the small picture or
crop function after the other editing functions have been applied.
Small picture
Crop
• Copies created with editing functions cannot be further edited with the same function used to
create them.
E25
Download from Www.Somanuals.com. All Manuals Search And Download.
D-Lighting: Enhancing Brightness and Contrast
Press the c button (playback mode) M select an image M d button M D-Lighting M
k button
D-Lighting
Use the multi selector HI to select OK and press
the k button.
•
•
The edited version is displayed on the right.
To exit without saving the copy, select Cancel and press the
k button.
OK
Cancel
E26
Download from Www.Somanuals.com. All Manuals Search And Download.
Glamour Retouch: Enhancing Human Faces
Press the c button (playback mode) M select an image M d button M
Glamour retouch M k button
1
2
Use the multi selector HIJK to select the
face that you want to retouch and press the
k button.
Subject selection
•
When only one face is detected, proceed to step 2.
Back
Skin softening
Use JK to select the effect, use HI to
select the effect level, and press the
k button.
3
2
1
•
You can simultaneously apply multiple effects.
Adjust or check the settings for all effects before pressing
the k button.
Back
B (skin softening), F (small face), A (big eyes),
C (brighten faces), E (hide eye bags), G (whiten eyes),
H (whiten teeth), D (redden cheeks)
•
Press the d button to return to the screen for selecting a face.
Preview
3
Preview the result and press the k button.
•
•
To change the settings, press J to return to step 2.
To exit without saving the edited image, press the
d button.
Save
E27
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select Yes and press the k button.
•
An edited copy is created.
Save OK?
Yes
No
B Notes About Glamour Retouch
• Only one face per image can be edited using the glamour retouch function.
• Depending upon the direction in which faces are looking, or the brightness of faces, the camera
may be unable to accurately detect faces, or the glamour retouch function may not perform as
expected.
• If no faces are detected, a warning is displayed and the screen returns to the playback menu.
E28
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Picture: Reducing the Size of an Image
Press the c button (playback mode) M select an image M dbutton MSmall picture M
k button
Small picture
1
2
Use the multi selector HI to select the
desired copy size and press the k button.
•
For images taken at an image mode setting of
z 5120×2880, only 640×360 is displayed.
640×480
320×240
160×120
Select Yes and press the k button.
•
An edited copy is created (compression ratio of
approximately 1:16).
Create small picture file?
Yes
No
E29
Download from Www.Somanuals.com. All Manuals Search And Download.
Crop: Creating a Cropped Copy
1
2
Refine copy composition and press the
d button.
•
Move the zoom control toward g (i) or f (h) to adjust
the zoom ratio. Set a zoom ratio at which u is
displayed.
•
Use the multi selector HIJK to scroll the image so that
only the portion to be copied is visible in the monitor.
3 . 0
3
Select Yes and press the k button.
•
An edited copy is created.
Save this image as
displayed?
Yes
No
C Image Size
When the image size of the cropped copy is 320 × 240 or smaller, the image is displayed at a smaller
size during playback.
C Cropping the Image in Its Current “Tall” Orientation
orientation. After cropping the image, rotate the cropped image back to “tall” orientation.
E30
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a TV (Viewing Images on a TV)
movies on the TV.
1
Turn off the camera and connect it to the TV.
•
Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an
angle when connecting or disconnecting them.
Yellow White
2
3
Set the TV’s input to external video input.
•
See the documentation provided with your TV for details.
Hold down the c button to turn on the camera.
•
Images are displayed on the TV.
•
The camera monitor does not turn on.
B If Images Are Not Displayed on the TV
E31
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
Users of PictBridge-compatible printers can connect the camera directly to the printer and
print images without using a computer.
Connecting the Camera to a Printer
1
2
Turn off the camera.
Turn on the printer.
•
Check printer settings.
3
Connect the camera to the printer using the USB cable.
•
Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an
angle when connecting or disconnecting them.
E32
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Turn on the camera.
•
The PictBridge startup screen (1) is displayed in the camera monitor, followed by the
Print selection screen (2).
Print selection
1
2
1 5 / 0 5 / 2 0 1 4 N o . 3 2
3 2
Printing Individual Images
1
2
Print selection
1 5 / 0 5 / 2 0 1 4 N o . 3 2
Use the multi selector to select the desired
image and press the k button.
3 2
•
Move the zoom control toward f (h) to switch to
thumbnail playback or g (i) to switch to full-frame
playback.
PictBridge
3
Use HI to select Copies and press the
k button.
1
prints
Start print
Copies
Paper size
E33
Download from Www.Somanuals.com. All Manuals Search And Download.
Copies
4
5
Select the desired number of copies (up to
nine) and press the k button.
4
PictBridge
Select Paper size and press the k button.
4
prints
Start print
Copies
Paper size
6
7
Select the desired paper size and press the k button.
•
To apply the paper size setting configured on the printer, select Default as the paper size
option.
•
The paper size options available on the camera vary depending on the printer that you use.
PictBridge
Select Start print and press the k button.
•
Printing starts.
4
prints
Start print
Copies
Paper size
8
When printing is complete, turn the camera off and disconnect the
USB cable.
E34
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Multiple Images
1
2
Print selection
When the Print selection screen is displayed,
press the d button.
1 5 / 0 5 / 2 0 1 4 N o . 3 2
3 2
Print menu
3
Use the multi selector HI to select Paper
Print selection
Print all images
DPOF printing
Paper size
size and press the k button.
•
To exit the print menu, press the d button.
4
5
Select the desired paper size and press the k button.
•
To apply the paper size setting configured on the printer, select Default in the paper size
option.
•
The paper size options available on the camera vary depending on the printer that you use.
Print menu
Select Print selection, Print all images, or
DPOF printing and press the k button.
Print selection
Print all images
DPOF printing
Paper size
E35
Download from Www.Somanuals.com. All Manuals Search And Download.
Print selection
Select images (up to 99) and the number of copies (up to
nine) of each.
Print selection
5
•
Use the multi selector JK to select images, and use
HI to specify the number of copies to be printed.
Images selected for printing are indicated by a and the
numeral indicating the number of copies to be printed. If
no copies have been specified for images, the selection
is canceled.
1
1
•
3
Back
•
Move the zoom control toward g (i) to switch to full-
frame playback or f (h) to switch to thumbnail playback.
Press the k button when setting is complete.
When the screen shown on the right is displayed, select
Start print and press the k button to start printing.
•
•
Print selection
5
prints
Start print
Cancel
Print all images
One copy each of all images saved in the internal memory,
or on the memory card, is printed.
Print all images
•
When the screen shown on the right is displayed, select
Start print and press the k button to start printing.
18 prints
Start print
Cancel
E36
Download from Www.Somanuals.com. All Manuals Search And Download.
DPOF printing
Print images for which a print order was created using the
DPOF printing
•
When the screen shown on the right is displayed, select
Start print and press the k button to start printing.
To view the current print order, select View images and
press the k button. To print images, press the k button
again.
5
prints
Start print
View images
Cancel
6
When printing is complete, turn the camera off and disconnect the
USB cable.
E37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Movies
•
When no memory card is inserted (i.e., when using the camera’s internal memory), Movie
1
Display the shooting screen.
•
•
Check the remaining amount of movie recording time.
menu is set to Movie frame+auto info, the area that will
be visible in the movie can be confirmed before movie
recording starts.
5 m 0 s
1 4 0 0
•
When recording movies, the angle of view (i.e., the area
visible in the frame) is narrower compared to that of still
images.
Movie recording time
remaining
2
Press the b (e movie-record) button to start
movie recording.
•
The camera focuses on the subject in the center of the
frame.
2 m 3 0 s
3
Press the b (e movie-record) button again to stop recording.
E38
Download from Www.Somanuals.com. All Manuals Search And Download.
B Maximum Movie Length
Individual movie files cannot exceed 2 GB in size or 29 minutes in length, even when there is
sufficient free space on the memory card for longer recording.
• The maximum movie length for a single movie is displayed on the shooting screen.
• Recording may end before either limit is reached if camera temperature becomes elevated.
• The actual movie length may vary depending on the movie content, subject movement, or type of
memory card.
B Notes About Saving Images and Recording Movies
The indicator showing the number of exposures remaining or the indicator showing the maximum
movie length flashes while images are being saved or while a movie is being recorded. Do not open
the battery-chamber/memory card slot cover or remove the batteries or memory card while
an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
B Notes About Movie Recording
• Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording
Class rating are used.
• There may be some degradation in image quality when digital zoom is used.
• The sounds of zoom control operation, zoom, autofocus lens drive movement, and aperture
operation when brightness changes may be recorded.
objects such as the sun, reflections of the sun, and electric lights is recommended.
• Depending on the distance to the subject or the amount of zoom applied, subjects with repeating
patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.)
in them during movie recording and playback. This occurs when the pattern in the subject and the
layout of the image sensor interfere with each other; it is not a malfunction.
E39
Download from Www.Somanuals.com. All Manuals Search And Download.
B Camera Temperature
• The camera may become warm when shooting movies for an extended period of time or when
the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when recording movies, the camera will
automatically stop recording.
The amount of time remaining until the camera stops recording (B10s) is displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
B Notes About Autofocus
1. Set Autofocus mode in the movie menu to Single AF (default setting) before starting movie
recording.
2. Frame another subject—positioned at the same distance from the camera as the intended
subject—in the center of the frame, press the b (e movie-record) button to start recording, and
then modify the composition.
Playing Back Movies
Press the c button to enter playback mode.
1 5 / 0 5 / 2 0 1 4 1 5 : 3 0
0 0 1 0 . AV I
Press the k button to play back movies.
1 0 s
Movie options
•
4 s
Volume indicator
E40
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions Available During Playback
Playback controls are displayed in the monitor.
The operations listed below can be performed by using the
multi selector JK to select a control and then pressing the
k button.
Paused
Function
Rewind
Icon
A
B
Description
Hold down the k button to rewind the movie.
Advance
Pause
End
Hold down the k button to advance the movie.
Pause playback. The operations listed below can be performed while paused.
Rewind the movie one frame. Hold down the k button for
C
continuous rewinding.
E
G
Advance the movie one frame. Hold down the k button for
D
continuous advancing.
Resume playback.
F
Return to full-frame playback mode.
E41
Download from Www.Somanuals.com. All Manuals Search And Download.
Options Available in the Shooting Menus
The settings listed below can be changed by pressing the d button during shooting.
Image mode
White balance
Continuous
Color options
5 m 0 s
1 4 0 0
The settings that can be changed vary depending on the shooting mode, as shown below.
Easy auto mode
Scene
Smart portrait
Auto mode
w
–
w
–
w
–
w
w
w
w
–
–
–
–
–
–
–
–
–
w
w
w
–
–
–
–
–
–
E42
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
Image Mode Settings (Image Size and Quality)
Enter shooting mode M d button M Shooting menu M Image mode M k button
Select the combination of image size and compression ratio that is used when saving images.
The higher the image mode setting, the larger the size at which images can be printed, and
the lower the compression ratio, the higher the quality of the images, but the number of
images that can be saved is reduced.
Aspect ratio
(horizontal to vertical)
Option*
w 5152×3864P
Compression ratio
Approx. 1:4
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
4:3
4:3
4:3
4:3
4:3
4:3
16:9
x 5152×3864 (default setting)
i 3648×2736
r 2272×1704
q 1600×1200
O 640×480
z 5120×2880
*
The total number of pixels captured, and the number of pixels captured horizontally and vertically.
Example: x 5152×3864 = approx. 20 megapixels, 5152 × 3864 pixels
E43
Download from Www.Somanuals.com. All Manuals Search And Download.
C Notes About Image Mode
• The image mode setting can also be changed in shooting modes other than A (auto) mode. The
changed setting is also applied to other shooting modes.
• The setting may not be changed when using certain settings of other functions.
C Number of Images That Can Be Saved
• The approximate number of images that can be saved can be checked in the monitor when
• Note that due to JPEG compression, the number of images that can be saved may vary greatly
depending on the image content, even when using memory cards with the same capacity and
the same image mode setting. In addition, the number of images that can be saved may vary
depending on the make of the memory card.
• If the number of exposures remaining is 10,000 or more, the number of exposures remaining
display shows “9999”.
E44
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance (Adjusting Hue)
Select A (auto) mode M d button M White balance M k button
Adjust white balance to suit the light source or weather conditions in order to make the
colors in images match what you see with your eyes.
•
Use Auto under most conditions. Change the setting when you want to adjust the hue of
the image you are taking.
Option
Description
a Auto (default setting) White balance is automatically adjusted to suit lighting conditions.
Use when the desired result is not achieved with Auto,
b Preset manual
c Daylight
d Incandescent
e Fluorescent
f Cloudy
White balance adjusted for direct sunlight.
Use under incandescent lighting.
Use under fluorescent lighting.
Use when taking images under overcast skies.
Use with the flash.
g Flash
B Notes About White Balance
• Set the flash to W (off) when white balance is set to any setting other than Auto and Flash
• The setting may not be changed when using certain settings of other functions.
E45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Preset Manual
Use the procedure below to measure the white balance value under the lighting used during
shooting.
1
2
Place a white or gray reference object under the lighting that will be
used during shooting.
White balance
Use the multi selector HI to select Preset
Auto
manual in the White balance menu, and
Preset manual
press the k button.
Daylight
Incandesccent
•
The camera zooms in to the position for measuring white
balance.
Fluorescent
Cloudy
Flash
3
4
Select Measure and frame the reference
Preset manual
object in the measuring window.
•
To apply the last measured value, select Cancel and press
the k button.
Cancel
Measure
Measuring window
Press the k button to measure the value.
•
The shutter is released and measurement is complete. No image is saved.
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
E46
Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous Shooting
Select A (auto) mode M d button M Continuous M k button
Option
U Single
(default setting)
Description
One image is taken each time the shutter-release button is pressed.
While the shutter-release button is held all the way down, images are
captured continuously.
V Continuous
•
The frame rate for continuous shooting is about 1.1 fps and the maximum
number of continuous shots is about 6 (when image mode is set to
x 5152×3864).
While the shutter-release button is held all the way down, the camera
captures a series of up to ten images and automatically saves the sharpest
image.
Use when shooting a stationary subject in a place where flash photography is
prohibited and camera shake is likely to occur.
D BSS
(Best Shot
Selector)
Each time the shutter-release button is pressed all
the way down, the camera captures a series of 16
images and saves it as a single image.
•
•
•
The frame rate for continuous shooting is about
30 fps.
Image mode is fixed at L (image size: 2560 ×
1920 pixels).
W Multi-shot 16
Digital zoom cannot be used.
B Notes About Continuous Shooting
• When a setting other than Single is selected, the flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
• The frame rate for continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• The setting may not be changed when using certain settings of other functions.
E47
Download from Www.Somanuals.com. All Manuals Search And Download.
B Notes About Multi-shot 16
images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when
shooting with Multi-shot 16 enabled is recommended.
Color Options
Select A (auto) mode M d button M Color options M k button
Make colors more vivid or save images in monochrome.
Option
Description
n Standard color (default setting) Use for images exhibiting natural color.
o Vivid color
p Black-and-white
q Sepia
Use to achieve a vivid, “photoprint” effect.
Save images in black-and-white.
Save images in sepia tones.
r Cyanotype
Save images in cyan-blue monochrome.
B Notes About Color Options
The setting may not be changed when using certain settings of other functions.
E48
Download from Www.Somanuals.com. All Manuals Search And Download.
The Smart Portrait Menu
•
mode.
Skin Softening
Enter smart portrait mode M d button M Skin softening M k button
Option
Description
When the shutter is released, the camera detects one or more human
e On (default setting) faces (up to three), and processes the image to soften facial skin tones
before saving the image.
Off
Turns skin softening off.
The result of skin softening effect on your subject cannot be confirmed when framing images
for shooting. Check the results in playback mode, after taking images.
Smile Timer
Enter smart portrait mode M d button M Smile timer M k button
The camera detects human faces and then automatically releases the shutter whenever a
smile is detected.
Option
Description
a On (default setting) Enables the smile timer.
Off
Turns the smile timer off.
E49
Download from Www.Somanuals.com. All Manuals Search And Download.
Blink Proof
Enter smart portrait mode M d button M Blink proof M k button
Option
Description
The camera automatically releases the shutter twice with every shot
and saves one image in which the subject’s eyes are open.
•
If the camera saved an image in which the subject’s eyes may have
been closed, A blink was detected in the picture just taken. is
displayed for a few seconds.
y On
•
The flash cannot be used.
Off (default setting)
Turns the blink proof off.
E50
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
•
Print Order (Creating a DPOF Print Order)
Press the c button (playback mode) M d button M Print order M k button
If you configure print order settings in advance, you can use them with the printing methods
listed below.
•
Taking the memory card to a digital photo lab that supports DPOF (Digital Print Order
Format) printing.
•
•
Inserting the memory card into a DPOF-compatible printer’s card slot.
Print order
1
Use the multi selector HI to select Select
images and press the k button.
•
Select Delete print order and press the k button to
delete the print order for all images.
Select images
Delete print order
E51
Download from Www.Somanuals.com. All Manuals Search And Download.
Print selection
2
3
Select images (up to 99) and the number of
copies (up to nine) of each.
•
Use the multi selector JK to select images, and use HI
to specify the number of copies to be printed.
Images selected for printing are indicated by a and the
numeral indicating the number of copies to be printed. If no
copies have been specified for images, the selection is
canceled.
1
1
•
3
Back
•
•
Move the zoom control toward g (i) to switch to full-frame playback or f (h) to switch
to thumbnail playback.
Press the k button when setting is complete.
Print order
Select whether or not to print shooting date
and shooting information.
Done
•
•
•
Select Date and press the k button to print the shooting
date on all images.
Select Info and press the k button to print the shutter
speed and aperture value on all images.
Lastly, select Done and press the k button to complete
the print order.
Date
Info
B Notes About Printing Shooting Date and Shooting Information
• Some printers may not be able to print the shooting date and shooting information.
• Shooting information is not printed when the camera is connected to a printer.
• The Date and Info settings are reset each time the Print order option is displayed.
• The date printed is that saved when the image was captured.
the time of shooting are printed, even if the Print order date option is enabled for the images.
E52
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide Show
Press the c button (playback mode) M d button M Slide show M k button
Play back images one by one in an automated “slide show.” When movie files are played back
in the slide show, only the first frame of each movie is displayed.
Slide show
1
Use the multi selector HI to select Start
and press the k button.
•
The slide show begins.
Start
Loop
•
To repeat the slide show automatically, select Loop and
press the k button before selecting Start.
The maximum playback time is up to about 30 minutes
even if Loop is enabled.
•
Pause
2
Select End or Restart.
•
The screen shown on the right is displayed after the slide
show ends or is paused. To exit the show, select G and
then press the k button. To resume the slide show, select
F and then press the k button.
Operations During Playback
•
•
Use JK to display the previous/next image. Press and hold to rewind/fast forward.
Press the k button to pause or end the slide show.
E53
Download from Www.Somanuals.com. All Manuals Search And Download.
Protect
Press the c button (playback mode) M d button M Protect M k button
The camera protects selected images from accidental deletion.
Select images to protect or cancel protection for previously protected images from the image
Note that formatting the camera’s internal memory or the memory card permanently deletes
E54
Download from Www.Somanuals.com. All Manuals Search And Download.
The Image Selection Screen
When an image selection screen such as the one shown on
the right is displayed while operating the camera, follow the
procedures described below to select the images.
Protect
Back
ON/OFF
ON/OFF
ON/OFF
Protect
1
Use the multi selector JK to select an image.
•
full-frame playback or f (h) to switch to thumbnail
playback.
•
When selecting an image for Rotate image or Welcome
screen, or when using the Print selection screen to print
individual images, only one image can be selected.
Proceed to step 3.
Back
Protect
2
3
Use HI to select or deselect (or to specify
the number of copies).
•
When an image is selected, an icon is displayed below the
image. Repeat steps 1 and 2 to select additional images.
Back
Press the k button to apply image selection.
•
When Selected images is selected, a confirmation dialog is displayed. Follow the
instructions displayed in the monitor.
E55
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotate Image
Press the c button (playback mode) M d button M Rotate image M k button
Specify the orientation in which saved images are displayed during playback. Still images can
be rotated 90 degrees clockwise or 90 degrees counterclockwise.
displayed, press the multi selector JK to rotate the image 90 degrees.
Rotate image
Rotate image
Rotate image
Back
Rotate
Back
Rotate
Back
Rotate
Rotate 90 degrees
counterclockwise
Rotate 90 degrees
clockwise
Press the k button to finalize display orientation, and save orientation information with the
image.
E56
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy (Copy Between Internal Memory and Memory Card)
Press the c button (playback mode) M d button M Copy M k button
Copy images between the internal memory and a memory card.
Copy
1
2
Use the multi selector HI to select a
destination option to which images are
copied and press the k button.
Camera to card
Card to camera
Camera to card
Select a copy option and press the k button.
•
If you choose the Selected images option, use the image
Selected images
All images
B Notes About Copying Images
• Only files in formats that this camera can record can be copied.
• Operation is not guaranteed with images captured with another make of camera or that have
been modified on a computer.
C Copying to a Memory Card That Contains No Images
When the camera is switched to playback mode, Memory contains no images. is displayed. Press
the d button to select Copy.
E57
Download from Www.Somanuals.com. All Manuals Search And Download.
The Movie Menu
Movie Options
Enter shooting mode M d button M D menu icon M Movie options M k button
Select the desired movie option to record.
•
Option
Aspect ratio
(horizontal to vertical)
Image size
(Image size/Frame rate, File format)
f 720/30p (default setting*)
g 480/30p
1280 × 720
640 × 480
320 × 240
16:9
4:3
u 240/30p
4:3
*
When no memory card is inserted (i.e., when using the camera’s internal memory), the setting is
g 480/30p.
E58
Download from Www.Somanuals.com. All Manuals Search And Download.
Autofocus Mode
Enter shooting mode M d button M D menu icon M Autofocus mode M k button
Set how the camera focuses in movie mode.
Option
Description
Focus is locked when the b (e movie-record) button is pressed to
start recording.
Select this option when the distance between the camera and the
subject will remain fairly consistent.
A Single AF
(default setting)
Camera focuses continuously.
Select this option when the distance between the camera and
subject will change significantly during recording. The sound of the
camera focusing may be heard in the recorded movie. Use of Single
AF is recommended to prevent the sound of the camera focusing
from interfering with recording.
B Full-time AF
E59
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Welcome Screen
d button M z menu icon M Welcome screen M k button
Configure the welcome screen that is displayed when you turn on the camera.
Option
Description
None
(default setting)
Does not display the welcome screen.
COOLPIX
Displays a welcome screen with the COOLPIX logo.
Displays an image selected for the welcome screen.
•
and press the k button.
•
Because a copy of the selected image is saved in the camera, it will
be displayed when the camera is turned on, even if the original
image is deleted.
Select an image
•
An image cannot be selected if its aspect ratio is different from that
of the screen, or if the image size is extremely small after the small
picture or crop function is applied.
E60
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Zone and Date
d button M z menu icon M Time zone and date M k button
Set the camera clock.
Option
Description
Use JK to select a field and then use
HI to set the date and time.
Select the minute field and then press the
k button to finish.
•
•
Date and time
D
M
Y
01
01
2014
Date and time
00
00
Edit
Date format
Time zone
Select Year/Month/Day, Month/Day/Year, or Day/Month/Year.
Set time zone and daylight saving time.
•
When Travel destination (x) is set after having set the home time zone
(w), the time difference between the travel destination and the home time
zone is automatically calculated, and the date and time are saved for the
selected region.
Setting the Time Zone
Time zone and date
Date and time
1
Use the multi selector HI to select Time
zone and press the k button.
Date format
Time zone
London, Casablanca
15/05/2014 15:30
E61
Download from Www.Somanuals.com. All Manuals Search And Download.
Time zone
2
3
4
Select w Home time zone or x Travel
destination and press the k button.
Home time zone
Travel destination
•
The date and time displayed in the monitor changes
depending on whether the home time zone or travel
destination is selected.
London, Casablanca
15/05/2014 15:30
Time zone
Press K.
Home time zone
Travel destination
London, Casablanca
15/05/2014 15:30
Use JK to select the time zone.
New York, Toronto, Lima
•
Press H to enable daylight saving time function, and W is
displayed. Press I to disable the daylight saving time
function.
11:30
-04:00
•
•
Press the k button to apply the time zone.
If the correct time is not displayed for the home or travel
destination time zone setting, set the appropriate time in
Date and time.
Back
Time zone
Home time zone
Travel destination
New York, Toronto, Lima
15/05/2014 11:30
E62
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Settings
d button M z menu icon M Monitor settings M k button
Option
Photo info
Description
Set whether or not to display information in the monitor.
Select from five settings.
Brightness
•
Default setting: 3
Photo Info
Shooting mode
Playback mode
1 5 / 0 5 / 2 0 1 4 1 5 : 3 0
0 0 0 4 . J P G
Show info
Auto info
5 m 0 s
1 4 0 0
4 /
4
Current settings and operation guide are displayed as in Show info.
If no operations are performed for a few seconds, the information is hidden as
(default setting) in Hide info. Information is displayed again when the next operation is
performed.
Hide info
E63
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting mode
Playback mode
The current settings or operation
guide is displayed as in Auto info.
5 m 0 s
Framing
1 4 0 0
grid+auto info
In addition to information shown with
Auto info, a framing grid is displayed
to help frame images.
The framing grid is not displayed
when recording movies.
The current settings or operation
guide is displayed as in Auto info.
5 m 0 s
1 4 0 0
Movie
frame+auto info In addition to information shown with
Auto info, a frame is displayed before
recording begins that represents the
area that will be captured when
recording movies.
The movie frame is not displayed
when recording movies.
E64
Download from Www.Somanuals.com. All Manuals Search And Download.
Print Date (Imprinting Date and Time)
d button M z menu icon M Print date M k button
The shooting date and time can be imprinted on the images
when shooting, allowing the information to be printed even
15.05.2014
Option
f Date
Description
Date is imprinted on images.
S Date and time
Date and time are imprinted on images.
Date and time are not imprinted on images.
Off (default setting)
B Notes About Print Date
• Imprinted dates form a permanent part of image data and cannot be deleted. The date and time
cannot be imprinted on images after they have been captured.
• The date and time cannot be imprinted in the following situations:
- When using Pet portrait (when Continuous is selected) scene mode
- When shooting movies
• The imprinted date and time may be difficult to read when using a small image size.
E65
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic VR
d button M z menu icon M Electronic VR M k button
Select the electronic VR (vibration reduction) setting used when shooting still images.
Option
Description
The effects of camera shake are reduced when shooting still images in
the following situations:
•
•
•
•
When the flash mode is set to W (off) or Y (slow sync)
When the shutter speed is slow
When the Continuous setting is set to Single
When the subject is dark
w Auto
Off (default setting)
Electronic VR is disabled.
When Auto is selected, electronic VR is applied according to the shooting conditions while
E66
Download from Www.Somanuals.com. All Manuals Search And Download.
B Notes About Electronic VR
• Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that
• If the exposure period exceeds a certain period of time, electronic VR will not function.
• Electronic VR cannot be used when using the following scene modes.
• The effectiveness of electronic VR decreases as camera shake increases.
• The images captured may be somewhat “grainy” in appearance.
E67
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion Detection
d button M z menu icon M Motion detection M k button
Enable motion detection to reduce the effects of subject movement and camera shake when
shooting still images.
Option
Description
Motion detection is enabled with some shooting modes or settings, when
displayed on the shooting screen.
r
is
U Auto
(default setting)
When the camera detects subject movement or camera shake,
r
turns green,
and the ISO sensitivity and shutter speed are automatically increased to reduce
blurring.
Off
Motion detection is disabled.
B Notes About Motion Detection
• Motion detection may be unable to eliminate the effects of subject movement and camera shake
in some situations.
• Motion detection may be disabled if the subject exhibits significant movement or is too dark.
• The images captured using motion detection may be somewhat “grainy” in appearance.
E68
Download from Www.Somanuals.com. All Manuals Search And Download.
AF Assist
d button M z menu icon M AF assist M k button
Enable or disable the AF-assist illuminator which assists autofocus operation.
Option
Description
The AF-assist illuminator automatically lights up when the subject is dimly lit.
The illuminator has a range of about 1.9 m (6 ft 2 in.) at the maximum wide-
angle position and about 1.1 m (3 ft 7 in.) at the maximum telephoto
position.
a Auto
(default setting)
•
Note that for some scene modes, the AF-assist illuminator may not light.
Off
The AF-assist illuminator does not light.
Sound Settings
d button M z menu icon M Sound settings M k button
Option
Description
When On (default setting) is selected, the camera produces one beep when
operations are performed, two beeps when focus is acquired on the subject,
and three beeps when an error occurs. The start-up sound is also produced.
Button sound
•
Sounds are disabled when using Pet portrait scene mode.
When On (default setting) is selected, the shutter sound is produced when
the shutter is released.
Shutter sound
•
The shutter sound is not produced when using continuous shooting
mode, when recording movies, or when using Pet portrait scene mode.
E69
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Off
d button M z menu icon M Auto off M k button
Option
Auto off
Description
You can select 30 s (default setting), 1 min, 5 min, or 30 min.
If On (default setting) is selected, the camera enters standby mode when there is
no change in the brightness of the subject, even before the time selected for
Auto off has elapsed. The camera enters standby mode after 30 seconds when
Auto off is set to 1 min or less, or after one minute when Auto off is set to 5 min
or more.
Sleep mode
C Notes About Auto Off
The time that passes before the camera enters standby mode is fixed in the following situations:
• When a menu is displayed: 3 minutes (when auto off is set to 30 s or 1 min)
• When the audio/video cable is connected: 30 minutes
E70
Download from Www.Somanuals.com. All Manuals Search And Download.
Format Memory/Format Card
d button M z menu icon M Format memory/Format card M k button
Use this option to format the internal memory or a memory card.
Formatting the internal memory or memory cards permanently deletes all data. Data
that has been deleted cannot be recovered. Make sure to transfer important images to a
computer before formatting.
•
•
•
Do not turn the camera off or open the battery-chamber/memory card slot cover during
formatting.
To format the camera’s internal memory, remove the memory card. The Format memory
option is displayed in the setup menu.
To format a memory card, insert the memory card into the camera. The Format card
option is displayed in the setup menu.
Language
d button M z menu icon M Language M k button
Select a language for display of camera menus and messages.
Video Mode
d button M z menu icon M Video mode M k button
Adjust settings for connection to a TV.
Select from NTSC and PAL.
Both NTSC and PAL are standards for analog color television broadcasting.
E71
Download from Www.Somanuals.com. All Manuals Search And Download.
Blink Warning
d button M z menu icon M Blink warning M k button
Select whether or not the camera detects human subjects that have blinked using face
•
•
G (easy auto) mode
Option
Description
When one or more human subjects may have blinked in an image
captured using face detection, the Did someone blink? screen is
displayed in the monitor.
On
Check the image and determine whether or not another image should be
captured.
Off (default setting) Blink warning is disabled.
The Blink Warning Screen
Faces detected by the blink warning are displayed inside a
border.
Did someone blink?
The operations described below are available.
•
To enlarge the face: Move the zoom control toward g (i). If
more than one face is detected, use the multi selector JK
to select the desired face.
Exit
•
To switch to full-frame playback: Move the zoom control
toward f (h).
If you press the k button, or if no operations are performed for a few seconds, the camera
returns to shooting mode.
B Notes About Blink Warning
The blink warning may not function properly in some shooting conditions.
E72
Download from Www.Somanuals.com. All Manuals Search And Download.
Eye-Fi Upload
d button M z menu icon M Eye-Fi upload M k button
Select whether or not the camera’s Eye-Fi card (available from third-party manufacturers)
sends images to your computer.
Option
Description
b Enable
Upload images created by the camera to a preselected destination.
c Disable (default setting) Images are not uploaded.
B Notes About Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
• Remove your Eye-Fi card from the camera where wireless devices are prohibited. Signals may be
transmitted even if Disable is selected.
• Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
• The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.
• The camera is not compatible with the Endless Memory function. When it is set on a computer,
disable the function. If the Endless Memory function is enabled, the number of images taken may
not be displayed correctly.
• Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
• Leaving the setting as Enable will result in the batteries being depleted in a shorter period of time.
C Eye-Fi Communication Indicator
• w: Eye-Fi upload is set to Disable.
• x (lights): Eye-Fi upload enabled; waiting to begin upload.
• x (flashes): Eye-Fi upload enabled; uploading data.
• y: Eye-Fi upload enabled but no images available for upload.
• z: An error occurred. The camera cannot control the Eye-Fi card.
E73
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset All
d button M z menu icon M Reset all M k button
When Reset is selected, the camera’s settings are restored to their default values.
•
Some settings, such as Time zone and date or Language, are not reset.
C Resetting File Numbering
To reset file numbering to “0001”, delete all images saved in the internal memory or on the memory
Battery Type
d button M z menu icon M Battery type M k button
matches the batteries currently in use.
Option
Description
LR6/L40 (AA-size) alkaline batteries
k Alkaline (default setting)
Nikon EN-MH2 rechargeable Ni-MH (nickel metal hydride)
batteries
l COOLPIX (Ni-MH)
m Lithium
FR6/L91 (AA-size) lithium batteries
E74
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Refer to the table below if an error message is displayed.
Display
Cause/Solution
A
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write” position.
–
This card cannot be
used.
An error occurred while accessing the memory card.
•
•
•
Use an approved card.
Check that the terminals are clean.
Confirm that the memory card is correctly inserted.
This card cannot be
read.
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card. If you
need to keep copies of any images, make sure to select No
and save the copies to a computer or other medium before
formatting the memory card. Select Yes and press the
k button to format the memory card.
Card is not formatted.
Format card?
The write-protect switch of the Eye-Fi card is in the “lock”
position.
–
Not available if Eye-Fi
card is locked.
An error occurred while accessing the Eye-Fi card.
•
•
Check that the terminals are clean.
Confirm that the Eye-Fi card is correctly inserted.
Out of memory.
Delete images or insert a new memory card.
E76
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Cause/Solution
A
An error occurred while saving the image.
memory card.
The camera has run out of file numbers.
memory card.
Image cannot be saved.
The image cannot be used for the welcome screen.
There is insufficient space to save the copy.
Delete images from the destination.
Image cannot be
modified.
Select images that support the editing function.
A time-out error occurred while saving the movie on the
memory card.
Select a memory card with a faster write speed.
Cannot record movie.
There are no images in the internal memory or on the
memory card.
•
Remove the memory card from the camera to play back
images in the camera’s internal memory.
Memory contains no
images.
•
to the memory card, press the d button to select Copy
in the playback menu.
The file was not created or edited with this camera.
The file cannot be viewed on this camera.
View the file using a computer or the device used to create or
edit this file.
File contains no image
data.
–
All images are hidden.
There are no images available for a slide show.
This image cannot be
deleted.
The image is protected.
Disable protection.
E77
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Cause/Solution
A
A lens error occurred.
Turn the camera off and then on again. If the error persists,
contact your retailer or Nikon-authorized service
representative.
Lens error
An error occurred while communicating with the printer.
Turn the camera off and reconnect the USB cable.
Communications error
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the batteries, and
turn the camera on. If the error persists, contact your retailer
or Nikon-authorized service representative.
Printer error: check
printer status.
After solving the problem, select Resume and press the
–
–
–
–
k button to resume printing.*
Printer error: check
paper
Load the specified size of paper, select Resume, and press
the k button to resume printing.*
Remove the jammed paper, select Resume, and press the
k button to resume printing.*
Printer error: paper jam
Printer error: out of
paper
Load the specified size of paper, select Resume, and press
the k button to resume printing.*
There is a problem with the printer’s ink.
Check the ink, select Resume, and press the k button to
resume printing.*
Printer error: check ink
–
Replace the ink cartridge, select Resume, and press the
Printer error: out of ink
Printer error: file corrupt
–
–
k button to resume printing.*
There is a problem with the image file to be printed.
Select Cancel and press the k button to cancel printing.
*
See the documentation provided with your printer for further guidance and information.
E78
Download from Www.Somanuals.com. All Manuals Search And Download.
File Names
Images or movies are assigned file names as follows.
DSCN0001.JPG
Identifier
(not shown on camera monitor)
Extension
(indicates file format)
Original still images
DSCN
Still images
Movies
.JPG
.AVI
and movies
Small copies
SSCN
RSCN
Cropped copies
D-Lighting copies and
skin softening copies
File number (assigned automatically in
ascending order, starting with “0001”)
FSCN
E79
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
Rechargeable
battery
Rechargeable Ni-MH batteries EN-MH2-B2 (set of two EN-MH2 batteries)*
Rechargeable Ni-MH batteries EN-MH2-B4 (set of four EN-MH2 batteries)*
Battery Charger MH-72 (includes two EN-MH2 rechargeable Ni-MH batteries)*
Battery Charger MH-73 (includes four EN-MH2 rechargeable Ni-MH batteries)*
Battery charger
AC Adapter EH-65A (connect as shown)
1
1
2
AC adapter
USB cable
2
Make sure that the power connector cord has been properly aligned in the
battery-chamber groove before closing the battery-chamber/memory card
slot cover. If part of the cord runs out of the groove, the cover or cord may be
damaged when the cover is closed.
USB Cable UC-E16
Audio/video
cable
Audio Video Cable EG-CP14
*
To charge EN-MH2 batteries, use only Battery Charger MH-72 or MH-73. Do not use these battery
chargers to charge any other type of battery.
Availability may vary with country or region.
See our website or brochures for the latest information.
E80
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Notes and
Index
The Camera.............................................................................................................F2
Batteries...................................................................................................................F4
Memory Cards .......................................................................................................F6
Cleaning...................................................................................................................F7
Storage.....................................................................................................................F7
Approved Memory Cards ............................................................................... F19
F1
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Product
The Camera
To ensure continued enjoyment of this Nikon product, observe the precautions described
device.
B Do Not Drop
The product may malfunction if subjected to strong shock or vibration.
B Handle the Lens and All Moving Parts with Care
Do not apply force to the lens, lens cover, monitor, memory card slot, or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.
B Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
B Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
B Keep away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data saved on the memory card,
or affect the product’s internal circuitry.
F2
Download from Www.Somanuals.com. All Manuals Search And Download.
B Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the image sensor, producing a white
blur effect in photographs.
B Turn the Product off Before Removing or Disconnecting the Power Source
Do not remove the batteries while the product is on, or while images are being saved or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
B Notes About the Monitor
• Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99%
of pixels are effective, with no more than 0.01% being missing or defective. Hence while these
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is
not a malfunction and has no effect on images recorded with the device.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
B Notes About Smear
White or colored streaks may be visible when bright subjects are framed in the monitor. This
phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor; it is
characteristic of image sensors and does not indicate a malfunction. Smear may also take the form of
partial discoloration in the monitor during shooting. It does not appear in images saved with the
camera except in the cases of movies and of images saved with Multi-shot 16 selected for
Continuous. When shooting in these modes, we recommend that you avoid bright subjects such
as the sun, reflected sunlight, and electric lights.
F3
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries
B Notes About Using Batteries
• Used batteries may overheat. Handle with caution.
• Do not use batteries beyond their recommended expiration date.
• Do not turn the camera on and off repeatedly if discharged batteries are inserted in the camera.
B Spare Batteries
We recommend carrying spare batteries depending on where you are shooting. It may be difficult to
purchase batteries in certain areas.
B Charging Batteries
If using optional rechargeable batteries, charge the batteries before taking pictures. Batteries are not
charged at the time of purchase.
Be sure to read and follow the warnings noted in the operating instructions included with the
battery charger.
B Charging Rechargeable Batteries
• Do not mix batteries with different amounts of charge remaining, or batteries of a different make
or model.
• When using EN-MH2 batteries with this camera, charge two batteries at a time using Battery
Charger MH-72. When using Battery Charger MH-73, charge two or four batteries at a time. Use
only Battery Charger MH-72 or MH-73 to charge EN-MH2 batteries.
• When using Battery Charger MH-72 or MH-73, only charge EN-MH2 batteries.
B Notes About EN-MH1 Rechargeable Batteries and Battery Charger MH-70/71
• You can also use EN-MH1 Ni-MH rechargeable batteries with this camera.
• Use only Battery Charger MH-70 or MH-71 to charge EN-MH1 batteries.
• When using Battery Charger MH-70 or MH-71, only charge EN-MH1 batteries.
F4
Download from Www.Somanuals.com. All Manuals Search And Download.
B Notes About Rechargeable Ni-MH Batteries
• If you repeatedly charge rechargeable Ni-MH batteries while they still have some charge
remaining, the message Battery exhausted. may be displayed prematurely when using the
batteries. This is due to the “memory effect,” in which the amount of charge the batteries can hold
decreases temporarily. Use the batteries until there is no charge remaining and they will return to
their normal behavior.
• Rechargeable Ni-MH batteries discharge even when not being used. We recommend charging the
batteries just before using them.
B Cold Environment Usage
Battery performance decreases in cold environments. When using the camera in cold environments,
try not to let the camera and batteries become too cold. The camera may not function if you use
discharged batteries in cold environments. Keep spare batteries warm and alternate between two
sets of batteries. Batteries that cannot be used because they have become too cold can often be
used again when they have been warmed up.
B Battery Terminals
Dirt on the battery terminals can prevent the camera from functioning. Remove dirt from the
terminals using a dry cloth.
B Remaining Battery Charge
If you insert discharged batteries into the camera, the camera may indicate that the batteries have
adequate charge remaining. This is a characteristic of batteries.
B Recycling
Used batteries are a valuable resource. Please recycle used batteries in accordance with local
regulations. Cover the battery terminals with plastic tape when recycling.
F5
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Cards
memory cards.
• Observe the precautions noted in the documentation included with your memory card.
• Do not affix labels or stickers to the memory card.
• Do not format the memory card using a computer.
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera. We recommend formatting new memory cards with this camera
before using them with this camera.
• Note that formatting a memory card permanently deletes all images and other data on the
memory card. If there is data saved on the memory card that you wish to keep, copy that data to
a computer before formatting.
• If the message Card is not formatted. Format card? is displayed when the camera is turned on,
the memory card must be formatted. If there is data on the memory card that you do not want to
delete, select No and press the k button. Copy that data to a computer before formatting. To
format the memory card, select Yes.
• Observe the following precautions while formatting the memory card, saving and deleting
images, and copying images to a computer, otherwise data or the memory card itself may be
damaged.
- Do not open the battery-chamber/memory card slot cover or remove the memory card or
batteries.
- Do not turn off the camera.
- Do not disconnect the AC adapter.
F6
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is pumped to
produce a stream of air out the other end). To remove fingerprints or other stains
that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral
Lens
motion that starts at the center of them and working toward the edges. If this fails,
clean the lens using a cloth lightly dampened with commercial lens cleaner.
Remove dust or lint with a blower. To remove fingerprints and other stains, clean the
Monitor
monitor with a soft, dry cloth, being careful not to apply pressure.
Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry cloth.
After using the camera at the beach or other sandy or dusty environment, wipe off
any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry
thoroughly. Note that foreign matter inside the camera could cause damage not
covered by the warranty.
Body
Storage
Turn the camera off when not in use. Be sure that the power-on lamp is off before putting the
camera away. Remove the batteries if the camera will not be used for an extended period. Do
not store the camera with naphtha or camphor moth balls, or in any of the following locations:
•
Next to equipment that produces strong electromagnetic fields, such as televisions or
radios
•
•
Exposed to temperatures below –10°C (14°F) or above 50°C (122°F)
Places that are poorly ventilated or subject to humidity of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month. Turn the
camera on and release the shutter a few times before putting the camera away again.
F7
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If the camera fails to function as expected, check the list of common problems below before
consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Problem
Cause/Solution
Wait for recording to end.
A
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert the
battery or batteries or, if you are using an AC adapter,
disconnect and reconnect the AC adapter. Note that
although any data currently being recorded will be lost,
data that have already been recorded will not be affected
by removing or disconnecting the power source.
The camera is on but does
not respond.
•
•
•
The camera automatically turns off to save power
(auto off function).
Camera turns off without
warning.
cannot operate properly.
The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
–
•
•
•
The camera is off.
The batteries are exhausted.
The camera has entered standby mode to save
power. Press the power switch, shutter-release
button, A button, c button, or b (e movie-
record) button.
Monitor is blank.
•
The flash lamp flashes while the flash is charging.
Wait for the flash to charge.
•
•
The camera and TV are connected via an audio/
video cable.
F8
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause/Solution
A
•
Select Monitor settings > Brightness in the
setup menu and adjust the monitor brightness.
The monitor is dirty. Clean the monitor.
Monitor is hard to read.
•
•
If the camera clock has not been set, O flashes
during shooting and movie recording. Images and
movies saved before the clock is set are dated “00/
00/0000 00:00” or “01/01/2014 00:00” respectively.
Date and time of recording
are not correct.
and date option in the setup menu.
•
The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece and reset as required.
No indicators displayed in
monitor.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Time zone and date has not been set in the setup
menu.
Print date not available.
Date not imprinted on
images even when Print
date is enabled.
•
•
The current shooting mode does not support Print
date.
The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when
camera is turned on.
The clock battery is exhausted; all settings were
restored to their default values.
Camera settings reset.
The camera may become hot when used for an
extended period of time to shoot movies or send
images using an Eye-Fi card, or when used in a hot
environment; this is not a malfunction.
Camera becomes hot.
–
When Autofocus mode in the movie menu is set to
Full-time AF or while in some shooting modes, the
camera may produce an audible focusing sound.
Camera makes sound.
F9
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Issues
Problem
Cause/Solution
Disconnect the USB cable.
A
Cannot switch to shooting
mode.
•
When the camera is in playback mode, press the
A button or the shutter-release button.
When menus are displayed, press the d button.
The batteries are exhausted.
When the flash lamp is flashing, the flash is
charging.
No image captured when
the shutter-release button is
pressed.
•
•
•
•
The subject is too close. Try shooting using easy
auto mode, Close-up scene mode, or macro
mode.
Camera cannot focus.
Images are blurred.
•
•
•
The subject is hard to focus on.
Set AF assist in the setup menu to Auto.
Turn the camera off and then on again.
•
•
Use the flash.
(using the self-timer at the same time is more
effective).
•
•
Smear occurs when extremely bright light strikes the
image sensor. When shooting with Continuous set
to Multi-shot 16 and when recording movies,
avoiding bright objects, such as the sun, reflections of
the sun, and electric lights is recommended.
Streaks of light or partial
discoloration are visible in
the monitor.
F10
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause/Solution
A
Bright specks appear in
images captured with flash. flash mode setting to W (off).
The flash is reflecting off particles in the air. Set the
•
The flash mode is set to W (off).
•
•
A scene mode that restricts the flash is selected.
menu.
Flash does not fire.
•
•
A function that restricts the flash is enabled.
Digital zoom cannot be used in the following
situations.
-
Digital zoom cannot be
used.
is selected in scene mode
-
-
When smart portrait mode is selected
to Multi-shot 16
A function that restricts the Image mode option is
enabled.
Image mode not available.
•
Off is selected for Sound settings > Shutter
sound in the setup menu. No sound is produced
with some shooting modes and settings, even
when On is selected.
No sound when shutter is
released.
•
Do not block the speaker.
Off is selected for the AF assist option in the setup
menu. AF-assist illuminator may not light depending
on the current scene mode, even when Auto is
selected.
AF-assist illuminator does
not light.
Images appear smeared.
Colors are unnatural.
The lens is dirty. Clean the lens.
White balance or hue is not adjusted properly.
F11
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause/Solution
A
Randomly spaced bright
pixels (“noise”) appear in
image.
The subject is dark, and the shutter speed is too slow
using the flash.
•
The flash mode is set to W (off).
•
•
•
•
The flash window is blocked.
The subject is beyond the range of the flash.
Adjust exposure compensation.
The subject is backlit. Select Backlighting scene
Images are too dark
(underexposed).
Images are too bright
(overexposed).
Adjust exposure compensation.
When taking images with V (auto with red-eye
reduction), or when taking images using fill flash with
slow sync and red-eye reduction in Night portrait
Unexpected results when
flash set to V (auto with
red-eye reduction).
Red Eye Fix may be applied to areas not affected by
red-eye in rare cases. Use auto mode or any scene
mode other than Night portrait, and change the flash
mode to any setting other than V (auto with red-eye
reduction) and try taking an image again.
•
•
In some shooting conditions, facial skin tones may
not be softened.
For images containing four or more faces, try using
the Skin softening effect in Glamour retouch in
the playback menu.
Skin tones are not softened.
Saving images takes time.
It may take more time to save images in the following
situations.
•
•
•
When the noise reduction function is in operation,
such as when shooting in a dark environment
eye reduction)
When the skin softening function is applied while
shooting
–
F12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Issues
Problem
Cause/Solution
A
•
•
•
This camera may not be able to play back images
saved with another make or model of digital camera.
This camera cannot play back movies recorded with
another make or model of digital camera.
This camera may not be able to play back data
edited on a computer.
–
–
File cannot be played back.
Cannot zoom in on image.
•
•
Playback zoom cannot be used with movies, small
pictures, or images that have been cropped to a
size of 320 × 240 or smaller.
This camera may not be able to zoom in on images
captured with another make or model of digital camera.
•
•
•
•
Some images cannot be edited. Images that have
already been edited may not be edited again.
There is not enough free space in the internal
memory or on the memory card.
This camera is unable to edit images captured with
other cameras.
–
–
–
Cannot edit image.
Editing functions used for images are not available
for movies.
This camera cannot rotate images captured with
another make or model of digital camera.
Cannot rotate image.
–
•
•
Images are not displayed on
TV.
The memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
•
•
•
•
•
The camera is off.
The batteries are exhausted.
–
The USB cable is not correctly connected.
The camera is not recognized by the computer.
The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
Nikon Transfer 2 does not
start when camera is
connected to a computer.
F13
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause/Solution
A
•
•
The memory card contains no images. Replace the
memory card.
Remove the memory card to print images from the
internal memory.
Images to be printed are not
displayed.
The camera cannot be used to select the paper size in
the following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select the paper size.
Cannot select paper size
with camera.
•
The printer does not support the paper sizes
specified by the camera.
–
•
The printer automatically selects the paper size.
F14
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Nikon COOLPIX L30 Digital Camera
Type
Compact digital camera
20.1 million
Number of effective pixels
Image sensor
1
/2.3-in. type CCD; approx. 20.48 million total pixels
Lens
NIKKOR lens with 5× optical zoom
4.6–23.0 mm (angle of view equivalent to that of
26–130 mm lens in 35mm [135] format)
Focal length
f/-number
f/3.2–6.5
Construction
6 elements in 5 groups
Digital zoom
magnification
Up to 4× (angle of view equivalent to that of approx. 520 mm lens
in 35mm [135] format)
Motion blur reduction
Autofocus (AF)
Electronic VR (still pictures), motion detection (still pictures)
Contrast-detect AF
•
•
[W]: Approx. 50 cm (1 ft 8 in.)–∞, [T]: Approx. 80 cm (2 ft 8 in.)–∞
Macro mode: Approx. 10 cm (4 in.) (wide-angle position relative
to G)–∞
Focus range
(All distances measured from center of front surface of lens)
Focus-area selection
Monitor
Center, face detection
7.5 cm (3-in.), approx. 230k-dot, TFT LCD with anti-reflection coating
and 5-level brightness adjustment
Frame coverage
(shooting mode)
Approx. 98% horizontal and 98% vertical (compared to actual
picture)
Frame coverage
(playback mode)
Approx. 98% horizontal and 98% vertical (compared to actual
picture)
F15
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage
Media
Internal memory (approx. 25 MB), SD/SDHC/SDXC memory card
DCF, Exif 2.3, and DPOF compliant
File system
Still pictures: JPEG
Movies: AVI (Motion-JPEG compliant)
File formats
•
•
•
•
•
•
•
20M (High) [5152 × 3864P]
20M [5152 × 3864]
10M [3648 × 2736]
4M [2272 × 1704]
2M [1600 × 1200]
VGA [640 × 480]
Image size
(pixels)
16:9 [5120 × 2880]
ISO sensitivity
(Standard output
sensitivity)
ISO 80–1600
Exposure
Matrix, center-weighted (digital zoom less than 2×), spot (digital
zoom 2× or more)
Metering mode
Programmed auto exposure and exposure compensation
(–2.0 – +2.0 EV in steps of /3 EV)
Exposure control
Shutter
1
Mechanical and charge-coupled electronic shutter
1
•
•
/2000–1 s
4 s (Fireworks show scene mode)
Speed
Aperture
Range
Electronically-controlled ND filter (–2.6 AV) selection
2 steps (f/3.2 and f/8 [W])
Self-timer
Flash
Approx. 10 s
Range (approx.)
(ISO sensitivity: Auto)
[W]: 0.5–4.3 m (1 ft 8 in.–14 ft)
[T]: 0.8–2.1 m (2 ft 8 in.–6 ft 10 in.)
Flash control
TTL auto flash with monitor preflashes
F16
Download from Www.Somanuals.com. All Manuals Search And Download.
Interface
Data transfer protocol
Hi-Speed USB
MTP, PTP
Video output
I/O terminal
Can be selected from NTSC and PAL
Audio/video (A/V) output; digital I/O (USB)
Arabic, Bengali, Chinese (Simplified and Traditional), Czech, Danish,
Dutch, English, Finnish, French, German, Greek, Hindi, Hungarian,
Indonesian, Italian, Japanese, Korean, Marathi, Norwegian, Persian,
Polish, Portuguese (European and Brazilian), Romanian, Russian,
Spanish, Swedish, Tamil, Telugu, Thai, Turkish, Ukrainian,
Vietnamese
Supported languages
Power sources
•
•
•
•
Two LR6/L40 (AA-size) alkaline batteries
Two FR6/L91 (AA-size) lithium batteries
Two EN-MH2 rechargeable Ni-MH batteries (available separately)
AC Adapter EH-65A (available separately)
1
Battery life
•
•
•
Approx. 320 shots when using alkaline batteries
Approx. 950 shots when using lithium batteries
Approx. 570 shots when using EN-MH2 batteries
Still pictures
•
•
•
Approx. 1 h 5 min when using alkaline batteries
Approx. 2 h 45 min when using lithium batteries
Approx. 1 h 40 min when using EN-MH2 batteries
Movies (actual battery
life for recording)
2
Tripod socket
1/4 (ISO 1222)
Approx. 95.4 × 60.3 × 29.0 mm (3.8 × 2.4 × 1.2 in.) (excluding
projections)
Dimensions (W × H × D)
Weight
Approx. 164 g (5.8 oz) (including batteries and SD memory card)
Operating environment
Temperature
Humidity
0°C–40°C (32°F–104°F)
85% or less (no condensation)
•
Unless otherwise stated, all figures assume fresh LR6/L40 (AA-size) alkaline batteries and an
ambient temperature of 23 3°C (73.4 5.4°F) as specified by the Camera and Imaging
Products Association (CIPA).
F17
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Battery life may vary depending on conditions of use, such as the interval between shots or the
length of time that menus and images are displayed.
The included batteries are for trial use only. Figures listed for lithium batteries are measured using
commercially available FR6/L91 (AA-size) Energizer(R) Ultimate Lithium batteries.
Individual movie files cannot exceed 2 GB in size or 29 minutes in length. Recording may end
before this limit is reached if camera temperature becomes elevated.
B Specifications
• Nikon will not be held liable for any errors this manual may contain.
• The appearance of this product and its specifications are subject to change without notice.
F18
Download from Www.Somanuals.com. All Manuals Search And Download.
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved for use in
this camera.
•
Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording
movies. When using a memory card with a lower Speed Class rating, movie recording may
stop unexpectedly.
2
3
SD memory card
SDHC memory card
SDXC memory card
64 GB, 128 GB
64 GB
1
SanDisk
TOSHIBA
Panasonic
Lexar
2 GB
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
–
1
2 GB
–
64 GB
64 GB, 128 GB
1
2
If the memory card will be used with a card reader or similar device, make sure that the device
supports 2 GB cards.
SDHC compliant.
If the memory card will be used with a card reader or similar device, make sure that the
device supports SDHC.
SDXC compliant.
3
If the memory card will be used with a card reader or similar device, make sure that the
device supports SDXC.
•
Contact the manufacturer for details on the above cards. We cannot guarantee camera
performance when using memory cards made by other manufacturers.
F19
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademark Information
•
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Mac and OS X are trademarks or registered trademarks of Apple Inc. in the U.S. and other
countries.
•
•
•
•
•
Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC.
PictBridge is a trademark.
All other trade names mentioned in this manual or the other documentation provided
with your Nikon product are trademarks or registered trademarks of their respective
holders.
FreeType License (FreeType2)
Portions of this software are copyright © 2014 The FreeType Project
(http://www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
Portions of this software are copyright © 2014 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.
F20
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Symbols
B
Battery type.................................................. E74
Battery-chamber/memory card slot cover
Button sound.............................................. E69
C
A
Calendar display ....................................... E24
Charger........................................................... E80
F21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector cover................................................... 2
Continuous shooting............................. E47
D
E
Focus area............................................................... 13
G
Extension....................................................... E79
Eyelet for camera strap...................................... 1
F
H
I
Image mode................................................ E43
Internal memory................................................... 7
L
F22
Download from Www.Somanuals.com. All Manuals Search And Download.
Lens cover.................................................................. 1
M
P
Power........................................................................... 8
Preset manual............................................. E46
Print order...................................................... E51
Protect............................................................. E54
R
Microphone.............................................................. 1
Multi-shot 16............................................... E47
N
Number of exposures remaining
Reset all .......................................................... E74
O
F23
Download from Www.Somanuals.com. All Manuals Search And Download.
S
T
Time difference .......................................... E61
U
USB/audio/video output connector
V
Volume ........................................................... E40
W
Welcome screen....................................... E60
Z
Shooting mode button.................................... 2
Shutter sound............................................. E69
Shutter speed...................................................... 14
Skin softening............................................. E49
Slow sync ....................................................... E12
Sound settings........................................... E69
Speaker....................................................................... 2
Zoom in................................................................... 14
F24
Download from Www.Somanuals.com. All Manuals Search And Download.
F25
Download from Www.Somanuals.com. All Manuals Search And Download.
F26
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
No reproduction in any form of this manual, in whole or in part (except
for brief quotation in critical articles or reviews), may be made without
written authorization from NIKON CORPORATION.
CT3J01(11)
6MN32111-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|