N3G005W
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
Tool Box........................................................................................................................................................59
Tool Box > System Info ..........................................................................................................................60
Tool Box > Restore Setting .....................................................................................................................60
Tool Box > Firmware Upgrade.................................................................................................................61
Tool Box > Backup Settings....................................................................................................................61
Tool Box > Reset to Default ....................................................................................................................61
Tool Box > Reboot .................................................................................................................................61
Tool Box > Miscellaneous.......................................................................................................................61
WAN.Failover......................................................................................................................................... 63
Troubleshooting..................................................................................................................................... 67
Establishing.your.wireless.connection.................................................................................................. 70
Windows XP service pack 2...........................................................................................................................71
Mac OSX 10.4 ..............................................................................................................................................72
Windows Vista...............................................................................................................................................73
How.to.configure.WEP/WPA-PSK.Wireless.Security.............................................................................. 75
Legal.and.Regulatory.Information......................................................................................................... 77
YML894 Rev3
N3G005W 3G Wireless Router User Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
Overview
NetComm N3G005W 3G Wireless Router is a high-performance router that supports wireless networking
for home, office or public space usage. The NetComm N3G005W 3G Wireless Router supports the use of
a 3G USB Modem which enable you to distribute your 3G Broadband service among multiple computers.
It also has a WAN uplink port to connect the N3G005W to an ADSL/Cable modem or existing gateway
router. The inclusion of a Wireless Access Point feature will enable you to connect your computer or laptop
wirelessly to the internet via the router.
Security is a key issue with Broadband users and NetComm’s N3G005W 3G Wireless Router does not leave you
exposed. Employing the latest Active Firewall technology, the N3G005W blocks every unauthorized packet of data
that comes in ensuring your defenses are rock-solid against hackers, unauthorized entries and probes. What’s
more, the N3G005W 3G Wireless Router is equipped with a VPN pass-through feature allowing you to use a
standard VPN client for Point-to-Point communication even while your firewall is active.
The N3G005W Port Forwarding and UPnP function have made it easier for today’s Internet users to configure and
setup the myriad of Network Port Rules needed by Internet applications such as On-Line Gaming, Peer-To-Peer file
sharing and Messenger services to operate
YML894 Rev3
N3G005W 3G Wireless Router User Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W Features
3G.Access
IEEE 802.11b/g
IEEE 802.3
Standards
IEEE 802.3u
IP Filtering
Firewall
NAT (Network Address Translation) with VPN Pass through
MAC Filtering
Static IP, Dynamic IP, PPPoE, 3G
Supported.WAN.type
Connection.Scheme
NAT.function
Connect-on-demand, Auto-Disconnect
Class C ;One-to-Many; Max 253 Users; Virtual Server; DMZ Host
PPTP, L2TP and IPSec Pass Through
VPN
Web-Based and SNMP
DHCP Server and Client
Configuration.and.Management
Temperature: 0~40oC, Humidity 10%~90% non-condensing
Windows 95/98/ME/NT/2000/XP; Linux
Switching 5V 3.0A
Working.Environment
OS.supported
Power
1 WAN port, 1 LAN port (2xRJ45, 10/100 Base T), 1 USB 2.0 Port
DC Power Port
Ports
Wireless
IEEE 802.11b\g
Standard
54, 48, 36, 24, 18, 12, 9, and 6 Mbps per channel, Auto Fall-Back
2.4 – 2.483 GHz, CCK / OFDM modulation
Data.Rate
Frequency
Range.Coverage
indoors approx. 35-100 meters;
outdoors up to 100-300 meters
1-11 for N. America (FCC);1-11 for Canada (DOC)
1-13 Europe/Australia (Except Spain and France) (ETSI)
1-14 Japan (TELEC);
#.of.Channels
64-bit and 128-bit WEP Encryption; WPA Encryption, WPA2 Encryption
Detachable Antenna 1.8dBI
Security
Antenna
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
N3G005W
Package Contents
Your N3G005W Wireless Router Package contains the following items:
•
•
•
•
•
•
N3G005W Wireless Router
Quick Installation Guide
User Guide on CD
RJ-45 Straight-through Ethernet Cable
Cradle Set
5V, 3.0A Power Supply Unit.
If any of the above items are damaged or missing, please contact your dealer immediately.
Minimum System Requirements
Before continuing with the installation of your N3G005W Wireless Router, please confirm that you comply with the
minimum system requirements.
•
3G USB Modem with service for 3G Broadband access if you want to use 3G Broadband service.
Note:
Subject to terms and conditions from your 3G Broadband Internet Service.
•
•
Computer with Windows, Macintosh, or Linux-based operating systems with a working Ethernet adapter
with TCP/IP Protocol installed.
Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above.
Wireless.Computer.System.Requirements
Computer with a working 802.11b, or 802.11g wireless adapter
•
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Indicators
Label
3G
Status
Flashing
Off
Indicates
Flashes when unit is ready
Power is off
Flashing
On
Flashes when data is being sent and received on the LAN connection
Indicates a link to your LAN or Network card is active
Indicates no link to LAN
LAN
Off
Flashing
On
Flashes when data is being sent and received on the WAN connection
Indicates that the upstream link to your Modem or router via the WAN port is active
Indicates no link to WAN
WAN
Off
Flashing
Off
Indicates that the Wireless link is enabled
Indicates that the Wireless link is disabled
WIFI
Back.Panel.Ports
To connect to the supplied detachable antenna
Antenna
WAN
10/100 Base T Ethernet port (RJ-45) uplink port to connect to a modem or router
10/100 Base T Ethernet port (RJ-45) to connect to Ethernet network card or Ethernet Hub/Switch
USB 2.0 interface for connecting 3G USB Modem
LAN
USB
To reset your Wireless Router to factory default settings (All customized settings that you have saved will be lost!)
Connect to the Power Adapter that comes with your package
Reset
Power
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
8
N3G005W
Restoring Factory Defaults
This feature will reset the Router to its factory default configuration. Occasions may present themselves where you
need to restore the factory default settings on your router. Typical situations are:
•
•
•
You have lost your password and unable to login to the router;
You have purchased the router from someone else and need to reconfigure the device.
You are asked to perform a factory reset by a member of the excellent NetComm Support Staff.
In order to restore your router to its factory default settings, please follow these steps:
•
•
Ensure that the router is powered on (for at least 20 seconds).
Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At this point, the
reset is in progress. Do not power off the unit at this point.
•
•
After the router reboots, the default settings are now restored. This entire process takes several minutes
to complete.
Once you have reset the router to its default settings you will be able to access the device’s web
Default Settings
LAN.(Management)
Static IP Address:
192.168.123.254
255.255.255.0
blank
Subnet Mask:
Default Gateway:
WAN.(Internet)
WAN mode:
DHCP
Wireless
SSID:
netcomm n3g series
Auto
Channel:
Security:
WEP Key:
WEP, 64bit
a1b2c3d4e5
Modem.Access
Username:
Password:
admin
admin
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
Connecting your N3G005W
Wireless Router
Connect the N3G005W Wireless Router to Your Network
Note:
DO NOT connect N3G005W 3G Wireless Router to power before performing the installation steps below.
Step 1.
Attach the antenna.
1. Remove the antenna from its plastic wrapper.
2. Screw the antenna in a clockwise direction to the back panel of the unit.
3. Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Step 2.
Plug the USB 3G modem into the USB port.
Note:
The N3G005W 3G Wireless Router is designed to work with either UMTS, EV-DO or HSDPA 3G cards that can be used as modems
(support tethered data). Please refer to your service provider for detailed feature information.
Step 3.
Insert the Ethernet cable into LAN Port on the back panel of the N3G005W 3G Wireless Router, and an available
Ethernet port on the network adapter in the computer you will use to configure the unit.
Note:
The N3G005W 3G Wireless Router LAN Port is “Auto-MDI/MDIX.” This provides Ethernet cable LAN Port access.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀ
N3G005W
Step 5.
1. Connect the power adapter to the port on the back panel of your N3G005W 3G Wireless Router.
2. Then plug the other end of the power adapter into a wall outlet or power strip.
a. The 3G LED will turn ON to indicate that the unit is powered on.
b. Other LEDs will flash ON and OFF as the N3G005W 3G Wireless Router performs initialization and
Internet connection processes. This will take a few minutes.
c. When complete, the following LEDs will illuminate green: 3G, LAN, and WiFi.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
Setting up your PC
Having physically connected your N3G005W, the next step is to configure the router to establish a broadband
connection. Depending on your computers current settings you may first need to reconfigure the TCP/IP (Network
Settings) to access your 3G Wireless Router.
Follow the instructions for your operating system.
Windows® XP PCs
1. In the Windows task bar, click the Start button, and then click Control Panel.
2. Click on Network & Internet Connections icon. (Category mode only).
3. Click the Network Connections icon.
4. In the LAN or High-Speed Internet window, right-click on the icon corresponding to your network
interface card (NIC) and select Properties. (Often, this icon is labeled Local Area Connection).
5. The Local Area Connection dialog box displays with a list of currently installed network items. Ensure
that the check box to the left of the item labeled Internet Protocol (TCP/IP) is checked. Select Internet
Protocol TCP/IP and click on Properties.
6. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an IP
address automatically. Also click the radio button labeled Obtain DNS server address automatically.
7. Click OK twice to confirm your changes, and close the Control Panel.
Windows 2000 PCs
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Local Area Connection icon, and then
select Properties.
4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click
Properties
5. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an IP
address automatically. Also click the radio button labeled Obtain DNS server address automatically.
6. Click OK twice to confirm and save your changes, and then close the Control Panel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows Me PCs
1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2. Click on View All Control Panel Options.
3. Double-click the Network icon.
4. The Network Properties dialog box displays with a list of currently installed network components. If the
list includes Internet Protocol (TCP/IP), then the protocol has already been enabled. Skip to step 10.
5. If Internet Protocol (TCP/IP) does not display as an installed component, click Add…
6. In the Select Network Component Type dialog box, select Protocol, and then click Add…
7. Select Microsoft in the Manufacturers box.
8. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK. You may be prompted
to install files from your Windows ME installation CD or other media. Follow the instructions to install the
files. If prompted, click OK to restart your computer with the new settings.
Next,.configure.the.PC.to.accept.IP.information.assigned.by.the.modem:
9. Follow steps 1 - 3 above.
10. In the Network Properties dialog box, select TCP/IP, and then click Properties. If you have multiple
TCP/IP listings, select the listing associated with your network card or adapter.
11. In the TCP/IP Settings dialog box, click the radio button labeled Obtain an IP address automatically.
12. Click OK twice to confirm and save your changes, and then close the Control Panel.
Windows 95, 98 PCs
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Network icon.
3. The Network dialog box displays with a list of currently installed network components. If the list includes
TCP/IP, and then the protocol has already been enabled. Skip to step 9.
4. If TCP/IP does not display as an installed component, click Add… The Select Network Component Type
dialog box displays.
5. Select Protocol, and then click Add… The Select Network Protocol dialog box displays.
6. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list box.
7. Click OK to return to the Network dialog box, and then click OK again. You may be prompted to install
files from your Windows 95/98 installation CD.Follow the instructions to install the files.
8. Click OK to restart the PC and complete the TCP/IP installation.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢁ
N3G005W
Next,.configure.the.PCs.to.accept.IP.information.assigned.by.the.Modem:
9. Follow steps 1 - 3 above.
10. Select the network component labeled TCP/IP, and then click Properties. If you have multiple TCP/IP
listings, select the listing associated with your network card or adapter.
11. In the TCP/IP Properties dialog box, click the IP Address tab.
12. Click the radio button labeled Obtain an IP address automatically.
13. Click OK twice to confirm and save your changes. You will be prompted to restart Windows.
14. Click Yes.
Windows Vista
1. In the Windows task bar, click on Start and then click Control Panel.
2. Click on Network and Sharing Center. (Classic view only)
3. Click on Manage Network Connection on the left menu.
4. Right click on Local Area Connection and click on Properties
5. The Local Area Connection dialog box will display a list of currently installed network items. Ensure that
the check box to the left of the item labeled Internet Protocol Version 4 (TCP/IPv4) is checked. Select
Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
6. In the Internet Protocol Version 4 (TCP/IPv4) properties dialog box, click the radio button labeled
Obtain an IP address automatically. Also click the radio button labeled Obtain DNS server address
automatically.
7. Click OK twice to confirm your changes and close the Control Panel.
Mac OSX 10.4
1. Click the Apple icon and choose System Preferences.
2. Click on Network icon.
3. Set Location to Automatic and Show to Built In Ethernet.
4. Click on TCP/IP tab.
5. In the Configure option, choose Use DHCP with automatic address.
6. Click on Apply Now.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
Web Configuration Wizard
Having physically connected your N3G005W, the next
step is to establish the broadband connection to the
internet. Please follow the steps below to configure your
N3G005W router via the web configuration wizard utility.
5. Select the type of WAN connection that you
want to use and click on Next.
1. Open your web browser (e.g. Internet
Explorer/Firefox/Safari) and navigate to
Notes:
To use a USB Modem, please choose “3G Modem”. For
connection to an existing modem/router choose “WAN
Ethernet port”, please refer to the user guide for more details.
6. After choosing 3G, you need to enter the
information below, this will have been provided
to you by your 3G broadband service provider.
Click Next once you finished.
2. At the login screen, type in “admin” (without
quotes) in the System Password field. Then
click on Login.
Notes:
admin is the default login password for the unit.
3. Click on Wizard and then on Enter.
Note:
This example shows Bigpond Next G connection settings.
Note that you do not have to change the LAN IP address.
4. This page shows you the steps needed to
configure your N3G005W unit. Click Next to
continue.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
19
APN.(Access.Point.Name).for.various.providers
ISP
APN
Username/Password.required
telstra.internet
telstra.bigpond
3netaccess
vfinternet.au
internet
NO
Telstra
Bigpond
Three
YES
NO
NO
Vodafone
Optus
Virgin
NO
VirginBroadband
NO (PAP)
7. Please review the settings and click on Apply
Settings to save them. You can also click Back if
there is a error.
9. If everything is configured properly, the
System Status page will show that your 3G
service is online and the WAN IP address that
has been assigned.
Notes:
To let the wizard run a network testing please tick on Do
you want to proceed the network testing?
8. After several minutes the N3G005W will save
all the settings and the wizard is complete.
Click Finish to go back to the Status page and
the unit will now use the new settings.
N3G005W 3G Wireless Router User Guide
ꢀ0
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Setup
To access the Advanced Setup option of your N3G005W, you need to access the unit’s web configuration outline
on page 15 and click on Advanced Setup menu at the top of the page.
For first time installation, you will be presented with the following page. Choose Advanced Setup and click Enter to
access the Advanced Setup page.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ
N3G005W
After that, click on any of the top menu to access the respective settings pages.
Basic Setting
The Basic Setting page allows you to configure a number of basic settings on the unit. This section deals with
these features. Click on any of the menu on the left to configure the respective setting page.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic.Setting.>.Primary.Setup
This Page allows you to change the LAN (Local Area Network) settings on your N3G005W wireless router and the
WAN (Wide Area Network) connection.
Note:
This example shows WAN connection for Telstra Next G connection.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ4
N3G005W
1. LAN IP Address: the local IP address of this device.
2. LAN Netmask: the Netmask of the local IP address
3. WAN’s MAC Address: The WAN’s MAC of this device. If you want to clone the MAC address from your
computer network card, just click the Clone MAC and click Save.
4. Auto-Backup: tick to enable wired-Wan back up function. Enter an IP address where the unit will check
for wired-WAN connection.
5. WAN Type: WAN connection type of your ISP. Each WAN type will give you the option to enter the required
information. You can select one of the following options.
a. Static IP Address. For connection with static IP address.
b. Dynamic IP Address. For connection with dynamic IP address. Mostly used when the N3G005W unit
is in use in conjunction with another modem/router.
c. Dynamic IP Address with Road Runner Session Management. When using the N3G005W with Telstra
Bigpond Cable service.
d. PPP over Ethernet. For connection with PPPoE service. Mostly used when the N3G005W unit is
connected to a Bridge ADSL modem.
e. L2TP. For connection with L2TP service.
f. PPTP. For connection with PPTP service.
g. 3G. For connection with 3G service.
h. iBurst. For connection with iBurst service.
Notes:
All of the connection types above are used in conjunction with a modem or another router connected to the WAN port except for 3G which
needs a 3G USB modem installed. Static IP Address, Dynamic IP address, Dynamic IP Address with Road Runner Session Management and
PPP over Ethernet has an Enable Backup option to set it as the primary connection and the 3G USB modem as the backup connection.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ5
Static.IP.Address
If your WAN connection uses a static IP address, please select Static IP Address and fill in the required information
in the fields provided.
•
•
•
•
•
•
WAN IP Address. Type in the IP address assigned by your Internet Service Provider.
Subnet Mask. Type in the Subnetmask assigned by your Internet Service Provider.
WAN Gateway. Type in the WAN Gateway assigned by your Internet Service Provider.
WAN MTU. Leave as default unless instructed by your Internet Service Provider.
Primary DNS/Secondary DNS. Type in the DNS address assigned by your Internet Service Provider.
NAT Disable. Tick Enable to disable NAT.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁ
N3G005W
Dynamic.IP.Address
This connection will get the IP address from the internet service provider. Choose this connection if you are
connecting the router to an Optus Cable Modem service.
Leave everything as default unless instructed by your Internet Service Provider.
Dynamic.IP.Address.with.Road.Runner.Session.Management
This connection will get the IP address from the internet service provider. Choose this connection if you are
connecting the router to a Telstra Bigpond Cable modem.
•
•
•
Account. Type in your Account username.
Password. Type in your account password.
Login Server (Optional). Type in the login server of the Roadrunner service.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
PPP.over.Ethernet
Most ADSL service will use PPP over Ethernet protocol. Use this if you connect the router to a bridge ADSL modem.
•
•
•
PPPoE Account/ PPPoE Password. Type in your account username and password.
MTU. Leave as default unless instructed by your Internet Service Provider.
Primary DNS/Secondary DNS. Primary DNS/Secondary DNS. Type in the DNS address assigned by your
Internet Service Provider. Optional.
•
Maximum Idle Time. Enter the number of second you want to have elapsed without any activity before
your Internet connection terminates automatically. Set to 0 to disable.
•
•
PPPoE Service Name (Optional). Type in the PPPoE service name assigned by your Internet Service Provider.
Assigned IP Address (Optional). Type in the IP address assigned by your Internet Service Provider.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ8
N3G005W
L2TP.
For internet services using L2TP.
•
•
•
My Tunnel Name. Type in the Tunnel Name assigned by your Internet Service Provider.
Server IP address. Type in the server IP address assigned by your Internet Service Provider.
My IP Address. Tick Get IP from theDHCP Server if your service uses a DHCP server. Or tick on Use Static
IP and type in the IP address assign by your Internet Service Provider.
•
•
L2TP Account / L2TP Password. Type in the username and password assigned by your provider.
Maximum Idle Time. Enter the number of seconds you want to have elapsed without any activity before
your Internet connection terminates automatically. Set to 0 to disable.
•
Connect mode selection. Tick on Always-on for an always on connection.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
PPTP
For internet service using PPTP.
•
•
•
My Tunnel Name. Type in the Tunnel Name assigned by your Internet Service Provider.
Server IP address. Type in the server IP address assigned by your Internet Service Provider.
My IP Address. Tick Get IP from the DHCP Server if your service uses a DHCP server. Or tick on Use Static
IP and type in the IP address assigned by your Internet Service Provider.
•
•
PPTP Account / PPTP Password. Type in the username and password assigned by your provider.
Maximum Idle Time. Enter the number of seconds you want to have elapsed without any activity before
your Internet connection terminates automatically. Set to 0 to disable.
•
Connect mode selection. Tick on Always-on for an always on connection.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
30
N3G005W
3G
For 3G service, you need to enter the following, please refer to your 3G service provider for detailed information.
•
•
•
•
•
•
APN- Enter the APN for your PC card.
Pin Code- Enter the Pin Code for your SIM card
Dial-Number- This field should not be altered except when required by your service provider.
User Name- Enter your 3G username.
Password- Enter your 3G password.
Maximum Idle Time- Enter the number of seconds you want to have elapsed without any activity before
your Internet connection terminates automatically. Set to 0 to disable.
•
•
•
•
•
Auto-reconnect- Tick to enable auto reconnect function.
Authentication- Select the authentication method used by your internet service provider.
Primary DNS/Secondary DNS. Type in the DNS address assigned by your Internet Service Provider.
Auto Connect- Select Auto to enable auto reconnect function
Max Idle Time- Enter the number of seconds you want to have elapsed without any activity before your
internet connection terminates automatically.
•
Keep Alive- Select the keep alive method you want to use.
Note
For 3G WAN connection: The 3G connection fields may not be necessary for your connection. The information on this page will only be
used when your service provider requires you to enter a User Name and Password to connect to the 3G network.
Click Save to save the settings or Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
iBurst
For iBurst services using the iBurst USB choose iBurst and enter the following information
•
•
•
Username / Password. Type in your account username and password.
WAN MTU. Leave as default unless instructed by your Internet Service Provider.
Primary DNS/Secondary DNS (Optional). Primary DNS/Secondary DNS. Type in the DNS address assigned
by your Internet Service Provider.
•
Maximum Idle Time. Enter the number of seconds you want to have elapsed without any activity before
your Internet connection terminates automatically. Set to 0 to disable.
•
•
Service Name (Optional). Type in the service name assigned by your provider.
Assigned IP Address (Optional). Type in the IP address assigned by your provider.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
3ꢀ
N3G005W
Basic.Setting.>.DHCP.Server
This page allows you to configure the DHCP Server on the unit.
For more settings click on More.
1. DHCP Server: Please leave this set to Enable unless you have another DHCP server on the same network.
2. Lease Time: DHCP lease time to the DHCP client.
3. IP Pool Starting/Ending Address: You must specify the starting / ending address of the IP address pool.
Please leave as default unless necessary.
4. For following options please press
4. Domain: Optional.
button
5. Primary DNS/Secondary DNS: Optional, This feature allows you to manually assign a DNS Servers
6. Primary WINS/Secondary WINS: Optional, This feature allows you to manually assign a WINS Servers
7. Gateway: Optional. The IP Address of an alternate Gateway. This function enables you to assign another
gateway to your PC from the DHCP server.
Click Save to save the settings or Undo to cancel. You can also check the DHCP client list by pressing the Client
List button. Fixed Mapping button will bring you to the Security Setting > MAC Control page.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic.Setting.>.Wireless
This page allows you to configure the wireless feature of the unit such as SSID and security.
1. Wireless - Enable by default. Changing this option to Disable will turn off the wireless feature on the unit
and you will not be able to connect wirelessly.
2. WMM Capable- Choose Enable or Disable WMM function. WMM stands for Wi-Fi Multimedia, this provides
features that improve the user experience for audio, video and voice applications over Wi-Fi networks.
3. SSID- Service Set Identifier (SSID) is the name designated for the wireless network of the unit. The default
SSID is netcomm.n3g.series. This SSID can be easily changed to rename the wireless network. (Note:
SSID names may contain up to 32 ASCII characters)
4. Channel- can be from 1 to 13 or “Auto”, where Auto will select the best available channel. The default
setting is Auto.Devices on the network that want to connect to the unit must use the same channel. (Note:
Most wireless adapters will automatically scan and match the wireless channel). Changing this option
might improve the wireless signal quality. However, please only use channel 1 to 11 as certain wireless
adapter does not work on channel 12 and 13.
5. Auto Select Channel – Choose Enable to let the router decides the best channel to use. Disable to
choose manually.
6. Security- You may choose from the following option, No Encryption, WEP.802.1x, WPA-PSK, WPA, WPA2-
PSK, or WPA2. By default the N3G005W uses 64Bit WEP Encryption. Other option that you can use are
explained as follow:
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
34
N3G005W
a) WEP (Wired Equivalent Privacy). Enabling this security will protect your data while it is transferred
from the computer to the N3G005W router. Select the WEP Encryption (64bit or 128bit) and enter the
WEP key in Key 1 field. Please note that WEP Encryption key can only use numbers from 0 to 9 and
letters from A to F. 64 bit encryption needs 10 digits key and 128 bit encryption needs 26 digits key.
b) 802.1X: In order to use 802.1X security, you need to have a RADIUS server on your network that will
act as the authentication server. Please type in the details for your RADIUS server in the fields required.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
35
c) WPA-PSK/WPA2-PSK : A newer type of security is WPA-PSK-TKIP and WPA-PSK2-ADE. This type
of security gives a more secure network compare to WEP. Use TKIP Encryption Type for WPA-PSK
and AES for WPA2-PSK. After that, please enter the key in the Passphrase field. The key needs to
be more then 8 characters and less then 63 characters and it can be any combination of letters and
numbers. Please note that the configuration for WPA-PSK and WPA2-PSK is identical
d) WPA/WPA2 : Similar to 802.1X security but with TKIP or AES Encryption. You need to have a RADIUS
server on the network to perform user authentication. Please type in the details for your RADIUS
server in the fields required.
Notes:
After configuring wireless security, you also need to configure your wireless adapter to use the same security settings before you can
connect wirelessly. Not all wireless adapter supports WPA-PSK/WPA2-PSK/WPA/WPA2 security, please refer to your wireless adapter
user guide for more details. It is strongly recommended to set up a simple wireless security such as WEP 64bit or WPA (when the
wireless client supports WPA) in order to secure your network.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
3ꢁ
N3G005W
Click Save to save the settings and Undo to cancel.
To Configure WDS (Wireless Distribution System) click on WDS Setting button and you will be presented with the
following page.
WDS is used to wirelessly connect multiple Access Points (in WDS mode), and in doing so extends the wireless
infrastructure to locations where cabling is not possible or inefficient to implement.
Notes:
Be sure you understand the purpose of WDS mode before continuing with the configuration, and be aware that not all Access Points
can be use in WDS mode.
To enable WDS please make sure to tick the Enable tick box for Wireless Bridging.
And then type in the MAC address of the remote WDS unit in the Remote AP MAC list. Or you can copy the one
from the Scanned AP’s MAC list. This router can accommodate up to 6 remote MAC addresses.
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
3ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic.Setting.>.Change.Password
On this page you can change the N3G005W web configuration password. Please type in your old password
(factory default password is admin) and type in the new password. You also need to type in the new password in
the Reconfirm field.
Note:
if you change the password, please make sure that you use the new password the next time you log into the web configuration.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
38
N3G005W
Forwarding Rules
The Forwarding Rules page allows you to configure the port forwarding management on the unit. Click on any of
the menu on the left to access the respective setting page.
Forwarding rules are a necessary feature as by default NAT (Network Address Translation) will automatically block
incoming traffic from the Internet to the LAN if a specific port mapping does not exists in the NAT translation table.
Because of this, the NAT provides a level of protection for computers that are connected to your LAN. However,
this also creates a connectivity problem when you want to make LAN resources available to Internet clients, which
you may want to do to play network games or host network applications.
There are three ways to work around NAT and to enable certain LAN resources available from the Internet; Port
Forwarding (in Virtual Server page), Port Triggering (in Special AP page) and DMZ Host (in Miscellaneous page).
YML894 Rev3
N3G005W 3G Wireless Router User Guide
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwarding.Rules.>.Virtual.Server
A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer
specified by the Server IP. Virtual Server can also work with Scheduling Rules, and give user more flexibility on
Access control. For detail instructions on scheduling rules, please refer to Advanced Setting > Scheduling.
For example, if you have an FTP server (default port is port 21) at 192.168.123.1, a Web server (default port is
port 80) at 192.168.123.2, and a VPN server (default port is port 1723) at 192.168.123.6, then you need to
specify the following virtual server mapping table:
Service.Port
Server.IP
Enable
Ticked
Ticked
Ticked
192.168.123.1
192.168.123.2
192.168.123.6
21
80
1723
Note:
At any given time, only one IP address can be bind to a particular Service Port.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
40
N3G005W
Forwarding.Rules.>.Special.AP
Some applications like On-line games, Video conferencing and Internet telephony require multiple connections
to the internet. Because of that, these applications cannot work with a pure NAT router such as the N3G005W.
The Special Applications feature allows some of these applications to work with this router. If this fails to make
the application working, try to set up that computer as the DMZ host instead. Please refer to Forwarding Rules >
Miscellaneous section.
The fields are explained as follow:
1. Trigger: the outbound port number that will be triggered by the application..
2. Incoming Ports: when the trigger packet is detected, the inbound packets sent to the specified port
numbers will be allowed to pass through the firewall.
The N3G005W also provides predefined settings for some popular application. To use the predefined settings,
select your application from the Popular application list, select an unused ID from the list and then click Copy to.
After that the predefined settings will be added to the list.
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwarding.Rules.>.Miscellaneous
DMZ (Demilitarized Zone) Host is a computer without the protection of firewall. It allows that particular computer
to be exposed to unrestricted 2-way communication to the internet. It is mostly used for Internet games, Video
conferencing, Internet telephony and other special applications.
To enable DMZ, enter the IP address of the PC and tick on Enable.
Note:
This feature should be used only when necessary.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
4ꢀ
N3G005W
Security Setting
The Security Setting page allows you to configure the security management on the unit such as Packet filters and
MAC Control. Click on any of the menu on the left to access the respective setting page.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Security.Setting.>.Packet.Filters
Packet Filter enables you to control what packets are allowed to pass through the router. There are two type of
packet filter, Outbound Packet Filter which applies to all outbound packets and Inbound Packet Filter which only
applies to packets that destined to Virtual Server or DMZ host only.
To enable an Outbound Filter, please make sure to tick the Enable tick box on the top of the page.
There are two type of filtering policies:
1. Allow all to data traffic to pass except those match the specified rules.
2. Deny all to data traffic to pass except those match the specified rules.
For each direction, you can specify up to 48 rules. And for each rule you need to define the following:
•
•
•
•
•
•
Source IP address
Source port
Destination IP address
Destination port
Protocol: TCP or UDP or both.
Use Schedule Rule#
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
44
N3G005W
For source or destination IP address, you can define a single IP address (192.168.123.1) or a range of IP
addresses (192.168.123.100-192.168.123.200). Empty fields imply all IP addresses.
For source or destination port, you can also define a single port (80) or a range of ports (1000-1999). And you
need to add prefix “T” or “U” to specify TCP or UDP protocol e.g. T80, U53, U2000-2999. No prefix indicates both
TCP and UDP are defined. An empty implies all port addresses.
Packet Filter also works with Scheduling Rules, and gives user more flexibility on Access control. For detail
instruction regarding scheduling rule, please refer to Advanced Setting > Scheduling.
Click Save to save the settings and Undo to cancel.
Inbound.Filter:.
To access the Inbound Packet Filter page, click on Inbound Filter on the bottom of the Outbound Filter page. All the
settings on this page are similar to the one for the Outbound Filter.
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Security.Setting.>.Domain.Filters
Domain Filters enable you to prevent users from accessing specific domain addresses.
To enable the Domain Filter please make sure to tick the Enable tick box on the top of the page.
Log DNS Query. Please tick the Enable tick box if you want to log the action when someone accesses the specific
URLs.
Privilege Host/Netmask. To set a group of computer that has privilege to access the internet without any restriction.
To set a Domain Filter, you need to specify the following:
•
•
•
Domain Suffix. Please type the suffix of the URL that needs to be restricted. For example, “.com”, “xxx.
com”.
Action. The router action that you want when someone is accessing a URL that met the domain suffix.
Tick on Drop to block the access and/or tick on Log to log this access.
Enable. Tick to enable the rule.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
4ꢁ
N3G005W
Security.Setting.>.URL.Blocking
URL Blocking will block LAN computers from connecting to a pre-defined website. The major difference between
Domain Filter and URL Blocking is that Domain Filter require users to input a suffix (e.g. xxx.com, yyy.net) while
URL Blocking only requires user to input a keyword.
To enable URL Blocking please make sure to tick on Enable tick box on the top of the page.
To set a URL Blocking rule, you need to specify the following:
•
URL. If any part of the Website’s URL matches the pre-defined word then the connection will be blocked.
For example, you can use pre-defined word “sex” to block all websites if their URLs contain the pre-
defined word “sex”.
•
Enable. Tick to enable the rule.
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
4ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Security.Setting.>.MAC.Control
MAC Control allows you to assign different access rights for different users and to assign a specific IP address to
a certain MAC address.
To enable MAC Address Control please make sure to tick the Enable tick box on the top of the page.
Two types of control are available:
•
Connection control. Check Connection Control to control which clients (wired and wireless) can connect
to the unit. If a client is denied to connect to this device, it means the client can not access to the Internet
either. Choose allow or deny to allow or deny clients with MAC addresses that are not in the list to
connect to this device.
•
Association control. Check Association Control to control which wireless client can associate with the unit.
If a client is denied to associate with the unit, it means the client can not send or receive any data via this
device. Choose allow or deny to allow or deny the clients with MAC addresses that are not in the list to
associate to the wireless LAN
Click Next Page or Previous Page to see the entire list.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
48
N3G005W
Security.Setting.>.Miscellaneous
This page allows you to change various miscellaneous security settings on the unit.
These settings are:
1. Remote Administrator IPAdress/Host/Port. By default, only users on the LAN side can browse the unit web
configuration page to perform administration task. Enabling this feature will allow you to connect to the
web configuration from the internet. If the specified Host address is 0.0.0.0, any computer on the internet
can connect to the unit web configuration page. For better security, you can specify just one IP address
or even use subnet mask bits “/nn” notation to specified a group of trusted IP addresses for example,
“10.1.2.0/24”.
Note:
When Remote Administration is enabled, the web server port will be shifted to 80. However, you can also change web server port.
2. Administrator Time-out. The amount of time with no activity before the unit logout automatically, you may
set it to zero to disable this feature.
3. Discard PING from WAN side. When enabled, any host on the WAN port can not ping the unit.
4. Disable UPNP: When enable, the UPnP feature will be disabled. Some users will want to disable UPnP for
security reasons.
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Setting
The Advanced Setting page allows you to configure the advanced settings on the unit such as System log, Dynamic
DNS and SNMP. Click on any of the menu on the left to configure the access the respective setting page.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
50
N3G005W
Advanced.Setting.>.System.Log
The N3G005W Wireless router supports System log’s via syslog (using UDP packet).
For syslog, you need to enter the IP address of the host computer that will receive the syslog message and tick on
the Enable tick box for IP Address for Syslog.
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced.Setting.>.Dynamic.DNS
The Dynamic DNS feature enables users to have a static domain name for their internet connection even when
their internet connection IP address is dynamic. By mapping the host name to the current public IP address of the
router, users who want to connect to the router or any services behind the router from the internet can just use
the Dynamic DNS hostname instead of the IP Address which might change every time the router connects to the
Internet.
Before you can use Dynamic DNS service, you need to register an account on one of the many supported Dynamic
DNS provider such as DynDNS.org, TZO.com and dhs.org. After registering the account, the Dynamic DNS provider
will provide you with the following details:
•
•
•
Host Name
Username/Email
Password/Key.
To enable the Dynamic DNS feature on the unit, click the Enable check box, choose the respective Provider and
enter the details from your provider.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
5ꢀ
N3G005W
Advanced.Setting.>.QoS
To Enable QoS make sure the Enable Tick Box on the top of the page is ticked.
Total bandwidth of outgoing traffic.
Upstream.bandwidth
Total bandwidth of incoming traffic.
You can specify 8 QoS rules to control data flows through the Router.
Downstream.
bandwidth
Local IP:
IP address of LAN host
TCP or UDP port
Local Port:
Remote IP:
Remote Port:
QoS.Priority
IP address of WAN host
TCP or UDP port
The QoS Packet Filter classifies data packets to three kinds of data flows (High,Normal,Low). The ratio of
bandwidth division of each data flow is 6:3:1
Make sure you tick the Enable tick box so that the QoS Filter is active.
Enable
Click Save to save or Undo to cancel.
For source or destination port, you can define a single port (80) or a range of ports (1000-1999).And you need to add prefix “T” or “U” to specify
TCP or UDP protocol e.g. T80,U53,U2000-2999. No prefix indicates both TCP and UDP are defined. An empty implies all port addresses.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced.Setting.>.SNMP
SNMP (Simple Network Management Protocol) is a protocol designed to give user the capability to remotely
manage a computer or network device by polling and setting terminal values and monitoring network events.
To Enable SNMP, you need to set the following:
•
Enable SNMP. Check either Local or Remote or both to enable the function. If Local is ticked, the unit will
respond to request from LAN and if Remote is ticked, the unit will respond to request from WAN.
•
•
•
Get Community. Set the community for GetRequest. This will act as a password.
Set Community. Set the community for SetRequest. This will act as a password.
IP 1,IP 2,IP 3,IP 4. Input the IP addresses of your management PCs. The unit will send SNMP Trap
message only to the IP address listed.
•
SNMP Version. Select the SNMP version of your SNMP Management software.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
54
N3G005W
Advanced.Setting.>.Routing
When you have more than one router or subnet on your network, you need to enable routing function to allow
different subnets to communicate with each other.
There are two types of routing feature on the N3G005W Wireless Router, Dynamic routing and Static routing.
Dynamic Routing use RIP protocol to allow the N3G005W to adapt to changes in the network. RIP enables the
device to determine the best route for each packet based on the “hop count” or number of hops between Source
and Destination. Tick on Enable tick box to enable Dynamic Routing. Please select RIPv2 only if you have different
subnet in your network. Otherwise, please select RIPv1 if you need this protocol.
Static Routing allows computers that are connected to the N3G005W to communicate with computers on another
LAN segment which are connected to the N3G005W via another router. You can specify up to eight routing rules.
To set a rule, you need to specify the following:
•
•
•
•
•
IP address
Subnet mask
Gateway
Hop, number of hop.
And tick on Enable for each rule.
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced.Setting.>.System.Time
This page allows you to change the System time setting on the N3G005W Wireless Router.
There are three ways to set up the System Time on the unit.
1. Get Date and Time by NTP Protocol. Select if you want to get the date and time from an NTP server. You
also need to choose the Time Server and the Time Zone. Click on Sync Now! to sync the time with the
Time Server.
2. Set Date and Time using PC’s Date and Time. Select if you want to set the unit time using your computer
date and time.
3. Set Date and Time manually. Select to set the date and time manually.
After that, you also need to set the Daylight Saving setting. Select either Enable or Disable and define the Start and
End date for the daylight saving period.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
5ꢁ
N3G005W
Advanced.Setting.>.Scheduling
This feature allows you to define a time schedule for Virtual Server and Packet Filter rules on the unit.
To enable Scheduling please make sure to tick the Enable tick box at the top and click on Save. After that, create a
new rule by pressing the Add New Rule button.
Enter the Rule name and set the Start Time and End Time for each day. And then click Save to save the new rule.
Once defined, you can use it for Virtual Server and Packet Filter by entering the rule number in Schedule Rule#
Click Save to save the settings and Undo to cancel.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
5ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced.Setting.>.Performance
This page give you option to change the wireless advance settings.
1. Beacon Interval. Beacons are packets sent by the unit to synchronize to wireless clients. The default value
is set to 100 milliseconds and the acceptable value is 1 to 1000.
2. DTIM interval. The default value is set to 3 and the acceptable value is 1 to 65535. A DTIM is a
countdown informing clients of the next window for listening to broadcast and multicast messages. When
the unit has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with
a DTIM Interval value. AP clients hear the beacons and awaken to receive the broadcast and multicast
messages.
3. Wireless mode. Select wireless connection mode for wireless connection. G mode will only allows
connection from wireless clients with 802.11g connection. Please use mixed mode unless you want to
prevent older wireless (802.11b) adapter to connect.
4. TX Rates. Default rate is Auto and operates at 54Mbps data rate when possible but drop to lower rates
when necessary, dependent on signal strength and the capacity of the wireless client station.
5. SSID Broadcast. Choose enable or disable the wireless SSID broadcast. By turning off the broadcast of
the SSID, it is possible to make your wireless network nearly invisible.
6. Speed Enhanced Mode. This is Tx Brust function in only available for Ralink wireless solution.
7. Antenna Transmit Power: Default is 100% 17dbM. You can either increase or decreases the antenna
transmit power.
Click Save to save the settings and Undo to cancel.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
58
N3G005W
Tool Box
The Tool Box page consists of various tools for the unit. Click on any of the menu on the left to access the
respective page.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Tool.Box.>.System.Info
From this page you can view the System log and the Routing Table of the unit.
Tool.Box.>.Restore.Setting
To restore the configuration from a file, browse the configuration file and then click the Restore button.
Notes:
Please disable any anti virus or firewall program before doing restoring the settings.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
WAN Failover
Tool.Box.>.Firmware.Upgrade
To update your N3G005W firmware, browse the update image file or configuration file and then click the
Upgrade button.
Notes:
Please disable any anti virus or firewall program before doing the firmware upgrade.
Tool.Box.>.Backup.Setting
To back up your settings to a file, click the Backup Setting button and save it as a bin file. When you want to
restore those settings, please click Firmware Upgrade button and use the bin file.
Tool.Box.>.Reset.to.Default
To reset the unit back to factory default settings, click on the Reset to Default button and click OK. Please wait for
a few minutes as the unit will reboot after resetting the configuration.
Tool.Box.>.Reboot
To reboot the unit manually, click the Reboot button and click OK.
Tool.Box.>.Miscellaneous
Wake-on-LAN is a technology that allows you to power up a network device remotely. In order to use this feature,
the network device must be Wake-on-LAN enabled and you need to know the MAC address of the device. By
entering the network device MAC address and click on Wake Up, the router will send a wake-up frame to the
network device immediately.
Notes:
This feature only works for local computer connected to the router.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢁ3
Download from Www.Somanuals.com. All Manuals Search And Download.
The WAN failover feature of the N3G005W is designed to provide a backup WAN connection in case your primary
connection should fail. To use this feature, you will require both a regular WAN connection and a 3G WAN
connection.
Please follow these steps to set up WAN failover on your N3G005W.
2. At the login screen, type in “admin” (without quotes) in the System Password field. Then click on Login.
3. Set up a primary (non-3G) WAN connection by following the steps outlined in the Basic Setting > Primary
Setup section of the N3G005W User Guide.
4. Set up a secondary (3G) WAN connection by following the steps outlined in the Basic Setting > Primary
Setup section of the N3G005W User Guide.
5. Navigate to the Basic Setting > Primary Setup page. Select the Enable checking wired-WAN alive
N3G005W will periodically check that it can connect to this address to determine if the WAN connection
is still running.
6. In Basic Setting > Primary Setup, make sure that the selected WAN Type is your primary (non-3G) WAN
connection and click Save. You are now ready to use the internet connection as normal.
7. When your primary (non-3G) WAN connection fails, the N3G005W will automatically failover to the
secondary (3G) WAN connection. Please allow up to 2 minutes for this change to occur.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ4
N3G005W
8. When your primary (non-3G) WAN connection reconnects, the N3G005W will automatically revert to this
connection. Please allow up to 2 minutes for this change to occur.
9. To confirm that the process in Step 8 is complete, refresh the status page of the web interface after 1
minute. The WAN connection should appear as shown below:
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ5
N3G005W
Troubleshooting
This section provides an overview of common issues,
and possible solutions for the installation and operation
of the N3G005W Wireless Router.
2.
Why my wireless client can NOT access
the Internet?
When the N3G005W Wireless Router is configured to
use Wireless encryption (WEP, WPA/WPA2 etc), you
need to ensure your wireless adapter settings match
the router settings. Please refer to your wireless adapter
manual for more info. Ensure that the wireless client is
associated and joined with the correct Access Point.
1.
Unable to access the Web Configuration
when I use my computer to configure
the router.
Note:
It is recommended that you use an Ethernet connection to
configure the N3G005W.
To check this connection (Windows XP), follow these steps:
•
Click on Start > Control Panel > Network
Connection
Ensure that the LAN light on the N3G005W Wireless
router is ON.
•
•
Right Click on Wireless Network connection
If the light is NOT ON, check to see if the cable for the
Ethernet connection is securely connected.
Select View Available Wireless Networks. The
Connect to Wireless Network screen appears.
Ensure you have selected the correct wireless
network.
Note:
Ensure that the IP Address of the computer is in the same
range and subnet as the N3G005W Wireless Router.
The default IP Address of the N3G005Wireless Router is
192.168.123.254. All the computers on the local area
network must have a unique IP Address within the same
range (e.g., 192.168.123.x). All computers must also have
the same subnet mask (e.g., 255.255.255.0).
Ensure the IP Address assigned to the wireless adapter
is within the same subnet as the Access Point and
gateway. The N3G005W Wireless Router has a default
IP Address of 192.168.123.254. Wireless adapters
must have an IP Address in the same range (e.g.,
192.168.123.x). Although the subnet mask must be
the same for all the computers on the network, no two
devices may have the same IP Address. Therefore, each
device must have a unique IP Address.
Do a Ping test to make sure that the N3G005W Wireless
Router is responding.
•
•
•
Click on Start > Run
Type in CMD and press Enter.
Type “ping 192.168.123.254” (without quotes).
A successful ping will shows four replies.
To check the IP Address assigned to the wireless
adapter, follow the steps below:
Note:
If you have changed the default IP Address, ensure you ping
the correct IP Address assigned to the N3G005W.
•
•
•
•
Click on Start > Run
Type in CMD and press Enter.
Type in “ipconfig /all” and press Enter
Type in “ping 192.168.123.254” to check if
you can access the N3G005W
Note:
If you have changed the default IP Address, ensure you ping
the correct IP Address assigned to the N3G005W.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢂ
•
If you are using 2.4GHz cordless phones, X-10
equipment, or other home security systems,
ceiling fans, or lights, your wireless connection
may degrade dramatically, or drop altogether.
3.
Why does my wireless connection keep
dropping?
Please try the following steps to improve the wireless
signal quality.
•
•
To avoid interference, you can change the
wireless Channel on the N3G005W Wireless
Router.
•
Antenna Orientation.
–
Try different antenna orientations for the
N3G005W Wireless Router.
Keep your product at least 3-6 feet away from
electrical devices that generate RF noise.
Examples include: microwaves, monitors,
electric motors, and so forth.
–
Try to keep the antenna at least 6 inches
away from the wall or other objects.
•
•
Try changing the channel on the N3G005W
Wireless Router to a different channel to avoid
interference. Please refer to Basic > Wireless
section on page 27
5.
I do not remember my encryption key.
What should I do?
Keep your product away (at least 3-6 feet) from
electrical devices that generate RF noise, like
microwaves, monitors, electric motors, etc.
If you forgot your encryption key, the Wireless card will
not be able to establish a connection to the N3G005W
Wireless Router.
To reset the encryption key(s), login to the
4.
Can not establish a wireless connection?
An Ethernet connection is required to troubleshoot the
N3G005W Wireless Router..
N3G005Wireless Router web configuration using an
Ethernet connection. (Please refer to Basic > Wireless
on page 27, for additional information).
Note:
When the N3G005W Wireless Router unit is configured
to use Wireless encryption (WEP, WPA/WPA2 or any
encryption), you need to ensure that your wireless
adapter settings matches. Please refer to your wireless
adapter manual for additional information.
6.
How do I reset my N3G005W Wireless
Router to its factory default settings?
To hard-reset the N3G005W Wireless Router to its
factory default settings, follow the steps listed below:
•
Move the N3G005W Wireless Router and the
wireless client into the same room, and then
test the wireless connection.
•
Ensure that the router is powered on (for at
least 20 seconds).
•
•
Try to disable all security settings such as WEP,
and MAC Address Control.
•
Use a paper clip or a pencil tip to depress
the reset button for ten seconds and release.
At this point, the reset is in progress. Do not
power off the unit at this point.
Turn off the N3G005W and the client. And then
turn the N3G005W back on again, and then
turn on the client.
•
•
After the router reboots, the default settings
are now restored. This entire process takes
several minutes to complete.
•
•
Ensure that all devices are set to Infrastructure
mode.
Once you have reset the router to its
default settings you will be able to access
the device’s web configuration using
“admin”.
Ensure that the LED indicators are indicating
normal activity. If not, ensure that the AC power
and Ethernet cables are firmly connected.
•
Ensure that the IP Address, subnet mask,
gateway and DNS settings are correctly
entered on the computer.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ8
Establishing your
wireless connection
7.
What is VPN?
•
VPN stands for “Virtual Private Networking.”
VPN creates a “tunnel” through an existing
Internet connection using PPTP (Point-to-Point
Tunneling Protocol) or IPSec (IP Security)
protocols with various encryption schemes
including Microsoft Challenge Handshake
Authentication Protocol (MS-CHAP).
•
This feature allows you to use your existing
Internet connection to connect to a remote site
with added security.
8.
What can I do if my Ethernet cable does
not work properly?
•
•
First, ensure that there is a solid cable
connection between the Ethernet port on the
N3G005W Wireless Router, and your NIC
(Network Interface Card).
Second, ensure that the settings on your NIC
adapter are “Enabled,” and set to accept an
IP address from the DHCP (Please refer to
Computer Hardware Configuration on page 9
for additional information).
•
If all settings appear to be correct, ensure
that you are not using a crossover Ethernet
cable. Although the N3G005W Wireless Router
is MDI/MDIX compatible, not all NIC are.
Therefore, it is recommended that you use a
straight through Ethernet cable when possible.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ0
N3G005W
The following examples use “wireless” as the SSID and
64bit WEP with “a1b2c3d4e5” as the encryption key.
3. Select the wireless network you want to
connect to and click Connect:
Windows XP service pack 2
Follow these steps:
1. Open Network Connections (Start -> Control
Panel -> Network Connections):
4. Enter the network key (“a1b2b3d4e5”) and
click Connect:
2. Right-click on your Wireless Network Connection
and select View Available Wireless Networks:
5. The connection will show Connected.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. On the new window, tick on Show Password
and type in the network key in the Password
field. This example uses “a1b2c3d4e5” as the
key. After that, click on OK.
Mac OSX 10.4
Follow these steps:
1. Click on the Airport icon on the top right menu.
2. Click on the network name that you want to
connect. This example uses “NetComm n3G
Series” as the network name.
4. To check the connection, click on the Airport icon
and there should be a tick on the wireless name.
N3G005W 3G Wireless Router User Guide
ꢂꢀ
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
4. Choose “NetComm n3G Series”.
Windows Vista
Follow these steps:
1. Open Network and Sharing Center (Start >
Control Panel > Network and Sharing center).
5. Click on the wireless network name. In this
example, the wireless network name is
“wireless” and click “Connect”.
2. Click on “Connect to a network”.
6. Tick on “Display Characters” and type in the
network key. This example uses “a1b2c3d4e5”
as key. Click “Next” after that.
3. Choose “Connect to the Internet” and click on
“Next”.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢂ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
How to configure WEP/WPA-PSK
Wireless Security
7. Select the appropriate location. This will affect
the firewall settings on the computer.
Notes:
For other operating system (Windows 98SE, Windows ME,
Windows 2000 etc) or if you use the wireless adaptor utility
to configure your wireless connection, please consult the
8. Tick on both “Save this network” and “Start
this connection automatically” and click on
“Next”.
wireless adapter documentation for additional information.
9. Now the connection is ready.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ5
Download from Www.Somanuals.com. All Manuals Search And Download.
N3G005W
1. Open your web browser (i.e. Internet
Explorer or Firefox) and navigate to
•
Click on Save to save the settings
2. At the login screen, type in admin in the
System Password field. Then click on Login.
3. Click on Basic Setting and then click on Wireless.
6. To use WPA, please configure the following:
•
•
•
Change Security to WPA-PSK
Change Encryption Type to TKIP
Enter the WPA key in the Passphrase field.
Notes:
Notes:
The key needs to be more then 8 characters and less then
63 characters and it can be any combination of letters and
numbers.
4. After that you will be presented with the
wireless setting page. On this page you can
configure the wireless security.
•
Click Save to save the settings
Wireless client network cards must be WPA-compliant to
connect to a WPA enable network, if in doubt check the wireless
client network card documentation, or use WEP security.
5. To use WEP, please configure the following:
•
•
Change Security to WEP
Change WEP Encryption to 64bit or 128bit
(This example uses 64bit)
Notes:
Notes:
64 bit needs 10 digits key and 128 bit needs 26 digits key.
Notes:
After changing the security settings, you might need to remove
the current wireless settings on the computer and reconfigure
the wireless computer according to the new settings.
•
Type in the key in Key 1 field (This
example uses “a1b2c3d4e5” key)
WEP key can only use numbers (0 to 9) and letters (A to F).
YML894 Rev3
N3G005W 3G Wireless Router User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢂ
Legal & Regulatory Information
This manual is copyright. Apart from any fair dealing for the purposes
Customer Information
of private study, research, criticism or review, as permitted under the
ACA (Australian Communications Authority) requires you to be aware of
Copyright Act, no part may be reproduced, stored in a retrieval system
the following information and warnings:
or transmitted in any form, by any means, be it electronic, mechanical,
recording or otherwise, without the prior written permission of NetComm
Limited. NetComm Limited accepts no liability or responsibility, for
consequences arising from the use of this product.
(1) This unit shall be connected to the Telecommunication Network
through a line cord which meets the requirements of the ACA
TS008 Standard.
(2) This equipment has been tested and found to comply with the
Standards for C-Tick and or A-Tick as set by the ACA . These
standards are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio noise and, if not installed
and used in accordance with the instructions detailed within
this manual, may cause interference to radio communications.
However, there is no guarantee that interference will not occur
with the installation of this product in your home or office. If this
equipment does cause some degree of interference to radio or
television reception, which can be determined by turning the
equipment off and on, we encourage the user to try to correct the
interference by one or more of the following measures:
NetComm Limited reserves the right to change the specifications and
operating details of this product without notice.
NetComm is a registered trademark of NetComm Limited.
All other trademarks are acknowledged the property of their respective
owners.
•
•
Change the direction or relocate the receiving antenna.
Increase the separation between this equipment and the
receiver.
•
Connect the equipment to an alternate power outlet on a
different power circuit from that to which the receiver/TV is
connected.
•
Consult an experienced radio/TV technician for help.
(3) The power supply that is provided with this unit is only intended
for use with this product. Do not use this power supply with any
other product or do not use any other power supply that is not
approved for use with this product by NetComm. Failure to do so
may cause damage to this product, fire or result in personal injury.
N3G005W 3G Wireless Router User Guide
YML894 Rev3
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ8
N3G005W
Product Warranty
Limitations of Warranty
The warranty is granted on the following conditions:
The Trade Practices Act 1974 and corresponding State and Territory Fair
Trading Acts or legalisation of another Government (“the relevant acts”)
in certain circumstances imply mandatory conditions and warranties
which cannot be excluded. This warranty is in addition to and not in
replacement for such conditions and warranties.
1. This warranty extends to the original purchaser (you) and is not
transferable;
2. This warranty shall not apply to software programs, batteries, power
supplies, cables or other accessories supplied in or with the product;
To the extent permitted by the Relevant Acts, in relation to your product
and any other materials provided with the product (“the Goods”) the
liability of NetComm under the Relevant Acts is limited at the option of
NetComm to:
3. The customer complies with all of the terms of any relevant
agreement with NetComm and any other reasonable requirements
of NetComm including producing such evidence of purchase as
NetComm may require;
•
•
•
•
Replacement of the Goods; or
4. The cost of transporting product to and from NetComm’s
nominated premises is your responsibility; and,
Repair of the Goods; or
5. NetComm does not have any liability or responsibility under this
warranty where any cost, loss, injury or damage of any kind,
whether direct, indirect, consequential, incidental or otherwise
arises out of events beyond NetComm’s reasonable control. This
includes but is not limited to: acts of God, war, riot, embargoes,
acts of civil or military authorities, fire, floods, electricity outages,
lightning, power surges, or shortages of materials or labour.
Payment of the cost of replacing the Goods; or
Payment of the cost of having the Goods repaired.
All NetComm ACN 002 490 486 products have a standard 12 months
warranty from date of purchase. However some products have an
extended warranty option (refer to packaging). To be eligible for
the extended warranty you must supply the requested warranty
information to NetComm within 30 days of the original purchase by
registering on-line via the NetComm web site at
6. The customer is responsible for the security of their computer and
network at all times. Security features may be disabled within the
factory default settings. NetComm recommends that you enable
these features to enhance your security.
www.netcomm.com.au
The warranty is automatically voided if:
1. You, or someone else, use the product, or attempts to use it, other
than as specified by NetComm;
2. The fault or defect in your product is the result of a voltage surge
subjected to the product either by the way of power supply or
communication line, whether caused by thunderstorm activity or
any other cause(s);
3. The fault is the result of accidental damage or damage in transit,
including but not limited to liquid spillage;
4. Your product has been used for any purposes other than that for
which it is sold, or in any way other than in strict accordance with
the user manual supplied;
5. Your product has been repaired or modified or attempted to be
repaired or modified, other than by a qualified person at a service
centre authorised by NetComm; and,
6. The serial number has been defaced or altered in any way or if the
serial number plate has been removed.
YML894 Rev3
N3G005W 3G Wireless Router User Guide
ꢂ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Product.Warranty
NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended
warranty option, via registering your product online at the NetComm website www.netcomm.com.au. Refer to the User Guide
for complete product warranty conditions, limitations of warranty and other legal and regulatory information.
Contact.Information
If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s Customer Support Department.
Email:.support@netcomm.com.au
Note: NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For further information regarding the
advanced features of this product, please refer to the configuring sections in the User Guide or contact a Network Specialist.
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia
Download from Www.Somanuals.com. All Manuals Search And Download.
|
