Navman GPS Receiver SmartST Professional User Manual
User Manual  
SmartS™ꢀProfessional  
for Palm OS® 5  
NAVMAN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Navman SmartS™ Professional for Palm OS®  
5
Safety First  
It is your sole responsibility to adhere to the following safety instructions at all times.  
ꢀ
ꢀ
ꢀ
Do not operate SmartS Professional while driving.  
The handheld must be placed in a position where it cannot obstruct the driver’s view of the road.  
The handheld must not interfere with the normal operation of any airbags or other vehicle safety  
equipment.  
ꢀ
For security purposes and to avoid overheating, do not leave the handheld on the dash or  
windshield while your vehicle is unattended, especially in strong sunlight. Do not use or handle if  
the handheld is hot - leave it to cool out of the sun.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1 What is GPS? ................................................................................................7  
2 System Requirements..................................................................................8  
2-1 Palm Powered™ Handheld Requirements ...............................................................8  
2-2 Computer System Requirements..............................................................................8  
2-3 Supported Screen Resolution...................................................................................8  
3 The SmartST Professional CD Set..............................................................9  
4 Installing the SmartST Professional Desktop..........................................10  
4-1 Installing the SmartST Professional Desktop..........................................................10  
5 Installing the Handheld Software and New Maps...................................11  
5-1 Step 1: Connect the Handheld to Your Computer..................................................11  
5-2 Step 2: Install SmartST Professional ......................................................................12  
5-3 Install Maps.............................................................................................................14  
5-4 Using a Memory Card after SmartST Professional.................................................16  
5-5 Reading this User Manual and the Quick Start Guide............................................16  
5-6 Visit Navman for Updates .......................................................................................16  
6 Configuring the GPS Receiver ..................................................................17  
6-1 Alternative GPS Receivers......................................................................................17  
6-2 Sony PEGA-CC5 Series Car Cradle .......................................................................17  
7 Getting Started ...........................................................................................19  
7-1 Starting SmartST Professional................................................................................19  
7-2 Main Menu ..............................................................................................................19  
7-3 Configuring the GPS Receiver................................................................................20  
7-4 Switching On the GPS Receiver .............................................................................21  
7-5 Obtaining a GPS Fix................................................................................................22  
7-6 To Check GPS Reception .......................................................................................22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Navman SmartS™ Professional for Palm OS®  
5
8 Controls.......................................................................................................23  
8-1 Touch Screen ..........................................................................................................23  
8-2 Keyboard Entry .......................................................................................................23  
8-3 Zooming and Scrolling............................................................................................23  
8-4 Address Entry Icons................................................................................................24  
8-5 Changing the Volume..............................................................................................24  
9 Setting Your Destination............................................................................25  
9-1 Using a Quick Nav ..................................................................................................25  
9-2 Navigating to an Address........................................................................................26  
9-3 Navigating to an Intersection..................................................................................28  
9-4 Navigating to Points of Interest...............................................................................30  
9-5 Navigating to a Favorite..........................................................................................32  
9-6 Navigating to a Recent Destination ........................................................................33  
9-7 Using the Pop-Up Menu to Plan a Route ...............................................................34  
9-8 Route Planning Without a GPS Fix .........................................................................35  
10 Viewing Your Route..................................................................................36  
10-1 Map View ..............................................................................................................37  
10-2 Navigation View ....................................................................................................38  
10-3 3D Navigation Screen ...........................................................................................39  
10-3 Next Instruction View............................................................................................40  
10-4 Instruction List ......................................................................................................41  
10-5 Back-On-Track™ Feature.....................................................................................42  
11 Editing, Deleting and using Favorites and Quick Navs.........................43  
11-1 Adding a New Favorite..........................................................................................43  
11-2 Editing or Deleting a Saved Favorite.....................................................................43  
11-3 Quick Navs............................................................................................................46  
12 Using the GPS Status Information..........................................................47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Navman SmartS™ Professional for Palm OS®  
5
12-1 GPS Reception .....................................................................................................47  
13 Modifying the Settings.............................................................................50  
13-1 About Settings ......................................................................................................50  
13-2 GPS Settings.........................................................................................................51  
13-3 Display Settings ....................................................................................................51  
13-4 Guidance Settings.................................................................................................52  
13-5 Map Settings.........................................................................................................53  
13-6 POI (Points of Interest) Settings............................................................................53  
13-7 Routing Settings ...................................................................................................54  
14 Accessories ..............................................................................................55  
14-1 Memory Cards ......................................................................................................55  
14-2 Memory Card Writers............................................................................................55  
15 Frequently Asked Questions ...................................................................56  
16 End User License and Warranty Agreement..........................................57  
16-2 FCC Statement .....................................................................................................59  
16-3 Contact Us............................................................................................................59  
16-4 Copyright ..............................................................................................................60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Navman SmartS™ Professional for Palm OS®  
5
What is GPS?  
1
The Global Positioning System (GPS) is a network of satellites launched by the US military in the 1970s. The satellites  
continuously transmit accurate time and position information, which is freely used by commercial and military applications  
worldwide. GPS receivers are designed to pick up the high frequency radio signals from these satellites, and use the  
information to determine your exact location. Today, there are many applications that use GPS, from marine to automotive,  
aviation and military.  
There are 24 satellites in total, orbiting approximately 12,000 miles above the earth. While a GPS receiver can detect  
signals from up to 12 satellites at any one time, only three are needed to provide the two-dimensional position or “fix”  
(latitude and longitude) that is required for vehicle navigation systems. A three dimensional fix requires four satellites and  
provides improved positional accuracy.  
SmartS Professional is designed specifically to use GPS information to find your current position, and to calculate the  
best route to your desired destination using the road maps stored on your memory card. SmartS Professional will then  
guide you with voice and visual commands to your destination using the continuous stream of GPS data to track your  
position as you make a trip.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Navman SmartS™ Professional for Palm OS®  
5
System Requirements  
2
SmartS Professional for Palm OS® 5 is designed for a handheld running the Palm™ Operating System. A desktop  
computer or laptop is also required to install the SmartS Professional software and map data onto your handheld.  
Ensure your equipment meets the following requirements:  
2-1 Palm Powered™ Handheld Requirements  
•
•
Sony Users: CLIÉ™ handheld - models PEG-TG50, PEG-NX73V, PEG-NZ90.  
Palm Tungsten™ T, T2 and T3 series. Please check the Navman website for a current list of compatible  
models.  
•
•
Palm OS® 5.0 or higher.  
You will need a minimum of 7.5 MB (recomended 10 MB) of internal storage memory to run SmartS  
Professional. Additional memory requirements will vary according to the size of the maps you are using.  
•
A memory card is required to store maps (sold separately). Individual map regions range in size from 1.5 MB  
to 70 MB. The minimum recommended size of memory card is 128 MB.  
2-2 Computer System Requirements  
•
•
•
•
IBM® Compatible Pentium II 400MHz computer or higher, Dual Speed CD-ROM or higher.  
Microsoft® Windows® 98SE, ME, 2000 or XP  
Palm HotSync®.  
Internet Explorer version 5.5 or higher. An internet connection for software activation.  
2-3 Supported Screen Resolution  
•
Screens with 320x320 or 320x480 pixel resolution are supported. 320x480 screens are able to display a  
larger map area, and frequently display device-specific menus that can be used with SmartS Professional.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Navman SmartS™ Professional for Palm OS®  
5
3 The SmartST Professional CD Set  
On purchasing the SmartS Professional for Palm OS® 5 solution, you will have received the following material:  
1
2
3
4
5
SmartS Professional software.  
Map data for your region.  
User Manual and Quick Start Guide in Adobe® Reader® format.  
Adobe® Reader®.  
Application Product Key and Map Product Key  
Refer to Section 14 for information about accessories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Navman SmartS™ Professional for Palm OS®  
5
Installing the SmartST Professional Desktop  
4
The SmartSꢀProfessional CD set contains software and map data that allows you to:  
•
•
Install the SmartS Professional software onto your handheld.  
Install new maps to optional memory cards.  
Before you can use any of these features, you need to set up the SmartS Professional Desktop software on  
your computer. You will then be able to download software from your computer to your handheld via a HotSync®  
connection.  
If the installation  
wizard does not start,  
click Start on the  
Windows taskbar, then  
click Run… Type d:  
\setup.exe, then click  
OK. If your CD drive  
is assigned to a letter  
other than “d”, type this  
letter instead.  
4-1 Installing the SmartST Professional Desktop  
1
2
3
Place the software application CD into the CD drive on your  
computer. The SmartS Professional Desktop Installation  
wizard will start.  
Follow the prompts to accept the License Agreement, and  
load the SmartS Professional Desktop application onto your  
computer.  
Once the wizard has finished the installation, the SmartSꢀ  
Professional Desktop will automatically start.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Navman SmartS™ Professional for Palm OS®  
5
Installing the Handheld Software and New Maps  
5
Before installing SmartS Professional onto your handheld, ensure you have completed the following steps:  
1
Your handheld was supplied with an installation CD. Ensure that the Palm™ Desktop application from that CD is  
installed on your computer. (Palm™ Desktop includes the HotSync® application which is used to transfer data  
from your computer to your handheld).  
Tip: The main  
advantage of using  
a memory card  
writer is that the map  
download is faster.  
2
Some handheld devices require the use of a memory card writer to download maps to the memory card. Other  
devices (such as the Sony CLIÉ™) give you the option of downloading maps directly into a memory card plugged  
into the handheld, or using a memory card writer if you prefer.  
•
If you are planning to load map data ont o your memory card via a memory card writer, connect the memory  
card writer to your computer now. Follow the instructions supplied with your memory card writer to install  
the appropriate drivers onto your computer.  
•
Alternatively, if you are a Sony CLIÉ user, you can download maps directly to a memory card plugged into  
your handheld using either the MS Export or Data Export utility. You will find one of these applications on the  
installation CD supplied with your handheld.  
Note: Maps must be  
stored on a memory  
card. SmartS  
Professional will not  
operate without a  
3
Make sure you have a memory card available with enough space to load the required map regions.  
You are now ready to start installing the SmartS Professional for Palm OS® 5 navigation solution onto your handheld.  
Installation is a four-step process. Make sure you complete each step correctly:  
memory card plugged  
into your handheld.  
Step 1 ...... Connect the handheld to your computer.  
Step 2 ...... Install the SmartSꢀProfessional application onto your handheld.  
Step 3 ...... Install the maps you require onto your handheld.  
Step 4 ...... Read this User Manual and the Quick Start Guide.  
5-1 Step 1: Connect the Handheld to Your Computer  
Please refer to your handheld manual for instructions on connecting the handheld to your computer via HotSync.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Navman SmartS™ Professional for Palm OS®  
5
5-2 Step 2: Install SmartST Professional  
Note: Before  
beginning, make  
sure your handheld  
is connected to  
This procedure allows you to install the SmartS Professional  
software onto your handheld, or to upgrade existing software to a  
newer version. Once installed, follow the registration procedure to  
activate the application.  
the computer via a  
HotSync® connection,  
and that the SmartS  
Professional Desktop  
is installed on your  
computer.  
1
2
3
4
Insert a memory card into your handheld.  
Select SMARTS APPLICATION from the MAIN MENU.  
Select INSTALL APPLICATION.  
Select the HotSync® User name of your handheld device,  
and click DONE. A user message will display requesting a  
HotSync operation, which must be performed to complete  
the installation.  
5
6
Click OK and perform a HotSync® operation to install the  
application onto your handheld. The installation may take  
several minutes to complete. Please do not open other  
applications during this installation.  
If you plan to load map data onto your memory card via  
a memory card writer, remove the memory card from the  
handheld and insert it into the memory card writer now.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Navman SmartS™ Professional for Palm OS®  
5
7
Alternatively, if you are planning to download maps directly to a memory card plugged into your handheld:  
•
MS Import (or Data Import) should start automatically on your handheld once the HotSync® operation is  
complete. If not, tap on MS Import (or Data Import) from the handheld launcher screen.  
•
If your handheld uses Data Import, select the type of memory card you are using (eg. Memory Stick or SD  
card) and tap the Connect button.  
Note: You will need to  
8
Now you must activate your software. From the MAIN MENU, click on ACTIVATE SOFTWARE. The registration  
program will guide you through the following steps:  
have Microsoft Internet  
Explorer version 5.5  
or above to correctly  
activate the software.  
•
•
•
•
Connect to the internet. Click NEXT.  
Agree to the Navman Terms and Conditions. Click NEXT.  
Ensure your handheld is connected to the computer and Click NEXT.  
Enter the registration information. Some fields are  
optional. Be sure to complete all of the “Required” fields  
marked with an asterisk. Click NEXT.  
Warning: You will  
need the Product  
Keys every time  
•
•
Enter both the Application Product Key and the Map  
Product Key - both are clearly marked on the product  
packaging. Click NEXT.  
you upgrade your  
software. Keep these  
in a safe place.  
The registration program will now contact Navman and  
your handheld software will be activated.  
9
Click on MAIN MENU to return to the Main Menu.  
10 To complete the installation process, click INSTALL MAPS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Navman SmartS™ Professional for Palm OS®  
5
5-3 Install Maps  
Maps must be downloaded to one or more memory cards. This step allows you to manage the maps that you can use  
with SmartS Professional. The main options are:  
•
•
•
•
Review the maps you currently have stored in your memory card.  
Download new maps to a memory card plugged into your handheld.  
Download new maps to a memory card using a memory card writer on your computer.  
Remove maps from your memory card.  
1
2
If you are planning to load map data onto your memory card via a memory card writer, make sure the memory  
card writer is connected to your computer, and the memory card is inserted into the writer.  
Note: if you copy  
maps onto a new  
Alternatively, if you are planning to download maps directly to a memory card plugged into your handheld, make  
sure that MS Import (or Data Import) is running on your handheld, and that the memory card is plugged into your  
handheld.  
memory card that has  
not been used with  
SmartST Professional  
before, you must first  
plug the card into your  
handheld and run  
3
4
From the SmartS Professional Desktop menu on your computer, click on INSTALL MAPS.  
The SmartS Professional Map Downloader will display. This shows the areas covered by the maps contained on  
the CD. These areas are divided into regions. You can download selected regions onto a memory card using the  
Map Downloader interface.  
SmartST Professional.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Navman SmartS™ Professional for Palm OS®  
5
Maps available on the  
current CD are shaded  
Currently installed maps are  
displayed here.  
blue. When you select a  
region it appears green. The  
areas shaded grey are not  
available on the current CD.  
The Delete button  
deletes the selected  
map region from your  
memory card.  
Currently selected maps are  
displayed here.  
The Refresh button  
updates the screen.  
Note: Maps are of  
population areas and  
not political areas  
(eg. county or state).  
Sometimes you will  
need to load multiple  
maps to cover the  
desired area.  
5
6
7
To install a new map, choose one of the following:  
•
•
•
Click on the region that you wish to install. The region’s name will appear in the bottom left window.  
Click on “Add to Card”.  
Alternatively, drag and drop the region to the window on the right side of the screen.  
To search for a particular city on the Map Downloader to verify it’s region:  
•
•
•
Click FIND CITY. Type in the name of the town or city, or select from the list provided.  
Double click on your selection to locate the city on the map.  
Note: You may be  
supplied with several  
map CDs. If the map  
you require is not  
displayed, simply  
replace the CD  
currently in your CD-  
ROM drive with the  
correct CD.  
To install the map region, drag and drop the region to one of the windows on the right side of the screen.  
Once you have finished copying maps to your memory card, choose one of the following:  
•
If you have used a memory card writer, remove the memory card from the writer and plug it into your  
handheld. If you are using multiple memory cards, they can be used separately, or together if your handheld  
device has more than one memory card slot.  
•
If you have copied maps using MS Import (or Data Import), tap on DISCONNECT from the MS Import (or  
Data Import) screen on your handheld.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Navman SmartS™ Professional for Palm OS®  
5
5-4 Using a Memory Card after SmartST Professional  
Maps can be deleted from a memory card using the Map Downloader application. However, if you wish to start using  
the memory card for a different application (eg. a digital camera), you will need to reformat the card. This can be done  
using the CARD INFO application which is available on all standard Palm OS® 5 handhelds. Refer to the instructions  
supplied with your handheld for further information.  
5-5 Reading this User Manual and the Quick Start Guide  
You can read this User Manual and Quick Start Guide on your computer screen by selecting these options from the  
MAIN MENU.  
The User Manual and Quick Start Guide are available as Adobe PDF files. If you do not already have Adobe® Reader®  
software on your computer, you will need to install it by clicking the INSTALL ADOBE READER button. The User Manual  
or Quick Start Guide can then be read.  
5-6 Visit Navman for Updates  
Click on this option to visit the Navman website for updates, support and general information. Note: you will need an  
internet connection to use this option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Navman SmartS™ Professional for Palm OS®  
5
Configuring the GPS Receiver  
6
Note : For security  
SmartS Professional can operate with many different types of GPS receivers. Please follow the instructions relevant to  
purposes, and to  
avoid overheating,  
do not leave your  
handheld on the dash  
or attached to the  
windshield while your  
vehicle is unattended,  
especially in strong  
sunlight.  
your receiver, and learn how to:  
1
2
3
Connect your GPS receiver to the handheld.  
Install the GPS receiver into a vehicle.  
Learn about features available with the GPS receiver.  
6-1 Alternative GPS Receivers  
SmartS Professional supports a number of other types of GPS receivers, including the  
Navman Bluetooth GPS Receiver (shown here).  
1
2
To connect your handheld to a Bluetooth or serial GPS receiver, and for information on  
installing the GPS receiver into a vehicle, please refer to the instructions supplied with the  
GPS receiver.  
Once installed, use the SmartS Professional software to configure and switch on the GPS, and obtain a GPS fix.  
Instructions are provided in Section 7 - Getting Started.  
6-2 Sony PEGA-CC5 Series Car Cradle  
1
2
3
To connect your handheld to the Sony Car Cradle, and for information on  
installing the Sony Car Cradle into a vehicle, please refer to the instructions  
supplied with your Sony Car Cradle.  
SmartST Professional requires the Sony Car Cradle software to be installed on  
your handheld. Follow the instructions supplied with your Sony Car Cradle to  
install the software correctly.  
SmartS Professional will automatically recognise the Sony Car Cradle when it  
is connected to the handheld. Voice instructions will be delivered through the  
Car Cradle speaker using the Sony Text-to-Voice function. Note: When other  
types of GPS receivers are being used, the voice instructions will sound quite  
different as they are delivered directly through the speaker on your handheld.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Navman SmartS™ Professional for Palm OS®  
5
4
For your safety, a Restraint of Operation is automatically enforced when the handheld is connected to the Car  
Sony Users:  
Restricted Function.  
Refer Section 6-1.  
Cradle. The Restraint of Operation means that a number of menu items and functions are made unavailable to the  
user to avoid driver distraction. Restricted functions are highlighted throughout this manual, as shown in the left-  
hand column.  
Note: Restricted  
functions automatically  
become available  
when the handheld  
is removed from the  
Sony Car Cradle.  
5
SmartS Professional is designed to operate with the Sony card remote commander (remote control). The  
following diagram shows the functions that the Sony card remote commander buttons have when used with  
SmartS Professional.  
Volume up  
Volume down  
Map screen switching (Map/Nav/  
Combo)  
Main Menu display  
Map Scroll (up/down/right/left)  
Pop-up Menu display  
Announce current instruction  
Re-center vehicle position  
Return to the Sony  
CLIÉ™ Car Launcher  
Zooms map in and out  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Navman SmartS™ Professional for Palm OS®  
5
Getting Started  
7
7-1 Starting SmartST Professional  
1
2
In the Launcher screen, tap on SmartST.  
When SmartS Professional first starts, a short tutorial is available to show  
you how to use SmartS Professional. Tap anywhere on the screen to move  
to the next screen. This tutorial can be disabled by removing the tick on the  
last tutorial screen.  
3
The Main Menu will then be displayed.  
7-2 Main Menu  
The MAIN MENU provides you with access to all of the routing, setup and  
navigation screens.  
Select an option from the MAIN MENU.  
Follow the instructions in this User Manual to set your destination, choose how  
you want your route displayed, and set up SmartS Professional to suit your  
needs.  
Remember, set up your destination BEFORE you start your trip.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Navman SmartS™ Professional for Palm OS®  
5
7-3 Configuring the GPS Receiver  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
You only need to configure your GPS receiver if you are using a Bluetooth or serial GPS receiver: The Sony Car Cradle  
is configured automatically.  
1
For Bluetooth GPS Receivers:  
•
Switch on your Bluetooth receiver. Refer to the instructions supplied with your Bluetooth GPS Receiver for  
more information.  
Note: You only need  
to configure your GPS  
Receiver once.  
•
•
From the MAIN MENU, select SETUP.  
From the drop down list, select GPS.  
•
•
•
From the Port options, select BLUETOOTH.  
Tap on DISCOVER. SmartS Professional will search for active Bluetooth devices.  
Your Bluetooth Receiver should be found, and listed on the screen. Highlight the device, and tap on  
SELECT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Navman SmartS™ Professional for Palm OS®  
5
2
For Serial GPS Receivers:  
•
•
•
•
From the MAIN MENU, select SETUP.  
From the drop down list, select GPS.  
From the Port options, select SERIAL.  
Refer to the instructions supplied with your GPS Receiver to  
select the Baud Rate.  
7-4 Switching On the GPS Receiver  
All GPS Receivers must be switched on via the SmartS Professional  
software.  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
1
2
3
From the MAIN MENU, tap on GPS STATUS.  
Turn the GPS on by checking the "GPS On" box.  
Return to the MAIN MENU.  
Tip: It may take a few  
minutes to obtain an  
initial position fix, but  
will subsequently be  
much quicker. Refer to  
Section 7-5 Obtaining  
a GPS Fix.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Navman SmartS™ Professional for Palm OS®  
5
7-5 Obtaining a GPS Fix  
Tip: In order to  
attain good GPS  
performance, signals  
must be picked up  
from three or more  
satellites. To check  
satellite reception,  
see Section 12 Using  
the GPS Status  
Your handheld receives GPS signals through the GPS Receiver. In order for the receiver to receive signals:  
1
Your handheld must be outside or in a vehicle parked outside – sunlight alone is not sufficient (e.g. through the  
window of a building).  
2
Position the GPS Receiver:  
•
•
•
With a good view of the sky.  
Away from buildings, trees or large metal objects.  
Away from sources of electrical interference.  
Information.  
When you first power on your handheld or if SmartS Professional has not had a fix for several hours, it may take  
several minutes to obtain a GPS fix. You can minimize the amount of time that this takes by remaining stationary in your  
vehicle until SmartS Professional has a position fix.  
7-6 To Check GPS Reception  
Note: The position  
You will know when SmartS Professional has a GPS fix by the symbols  
on your Map Screen. When SmartS Professional has no fix, the position  
indicator in the middle of the screen will be colored red and the words  
“Waiting for GPS” will be displayed. Also, while SmartS Professional is  
attempting to obtain a fix, you will notice that there are no route instructions  
displayed on the Map Screen.  
icon  
indicates your  
current position. A  
red pointer indicates  
no GPS fix and a blue  
pointer indicates a  
valid GPS fix.  
To check GPS reception at any time, return to the MAIN MENU and select  
GPS STATUS (see Section 12-2 GPS Settings). If the GPS receiver is only  
receiving signals from a few satellites, consider moving the GPS receiver to  
a more open place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Navman SmartS™ Professional for Palm OS®  
5
Controls  
8
8-1 Touch Screen  
Note: To "tap and  
SmartS Professional is easy to use. Most of the time, you can tap on menu options and other on-screen buttons. The  
hold", press the stylus  
tip against the screen  
until a pop-up menu is  
displayed.  
tap and hold function can be activated by pressing on a street map and holding to bring up a pop-up menu.  
8-2 Keyboard Entry  
Some handhelds feature a full QWERTY keyboard. Use this to key in street address information.  
8-3 Zooming and Scrolling  
Generally, you will use controls on the touch screen to move around maps and menus. Some handheld models may  
have a toggle button and a scroll button which can also be used for zooming and scrolling. (eg. Sony CLIÉ™ handheld  
users can use the scroll button or the JogDial™).  
Note: Zooming IN  
displays a smaller area  
of the street map in  
more detail. Zooming  
OUT allows you to see  
a larger area, but with  
less detail.  
1
To zoom in and out on a map screen, tap on the  
or icons on the map screen.  
2
To scroll up and down menus and option lists, drag  
the stylus up and down the on-screen scroll bar.  
Scroll bar  
Zoom controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Navman SmartS™ Professional for Palm OS®  
5
8-4 Address Entry Icons  
Tip: The  
icon  
is displayed on all  
screens and maps  
- tap this icon at any  
time to return to the  
previous screen.  
When entering a destination address, a number of icons are displayed  
along the bottom of the address entry screen. The following list describes  
the function of each icon.  
Return to the previous screen.  
Add the destination to the Favorites list.  
Show the selected destination on the map.  
Navigate to the selected destination.  
Help - display a brief description of the functionality of each icon.  
Note: On the Sony Car  
Cradle, Voice Scheme  
is always English  
- UK Male. You can  
adjust the volume by  
pressing the VOL+/_  
button on the cradle  
or the card remote  
commander.  
8-5 Changing the Volume  
You are able to modify the volume of the voice guidance instructions to suit  
the driving conditions.  
To alter the volume of the voice guidance instructions:  
1
2
3
From the MAIN MENU, select SETUP.  
From the drop down list, select GUIDANCE.  
Use the stylus to drag the volume slider bar to the left (for less volume)  
or right (for more volume). A voice instruction will be spoken so that  
you can check the new volume you have selected.  
4
Tap the  
icon to accept the changes, and return to the Main Menu.  
Volume slider bar  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Navman SmartS™ Professional for Palm OS®  
5
Setting Your Destination  
9
Before you travel, you must first select a destination and allow SmartS Professional to plan your route. There are three  
main ways that you can program your destination:  
•
•
Use a QUICK NAV that you have previously programmed for destinations used on a regular basis.  
Set a new DESTINATION using one of the following methods:  
-
-
-
-
-
enter a specific street address;  
select the intersection of two streets;  
choose a Point of Interest such as a hotel, school or hospital;  
use a Favorite destination that you have stored already;  
pick an address you have recently travelled to.  
•
Take a position straight from the map and program this as your destination.  
9-1 Using a Quick Nav  
You are able to save your three most frequently used destinations as Quick  
Navs. This is the quickest and easiest way to set your route.  
1
2
From the MAIN MENU, select QUICK NAV.  
Select your previously programmed destination from the Quick Nav  
list.  
3
SmartS Professional will calculate the route from your current  
position, and take you straight to the Navigation Screen.  
For information on programming new Quick Navs, refer to Section 11-3  
Quick Navs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Navman SmartS™ Professional for Palm OS®  
5
9-2 Navigating to an Address  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
To enter a street address as your destination:  
1
2
3
From the MAIN MENU select DESTINATION, then ADDRESS. The Destination Address screen is displayed.  
Note: SmartS  
Professional will  
Select COUNTRY from the drop-down box.  
Select AREA - this could be a town, city, state or county. Start by entering the first few letters of the Area and then  
automatically display  
all countries contained  
in the maps currently  
loaded on the memory  
card. If there is only  
one country map  
use the drop down box to select from the appropriate options.  
4
Select ROAD and start entering the road name. SmartS Professional will display the first twenty matching road  
names in the drop down box. Tap a road to select it and complete the address. If the maps support house  
numbering, the destination can be finalized by entering the house/building number.  
loaded, this will be the  
only option provided.  
Tip: Step 3 is optional,  
but can be useful if  
your map area is large.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Navman SmartS™ Professional for Palm OS®  
5
5
Once the address is selected, choose from one of the following:  
Tip: If any of the  
destination fields are  
not presented in capital  
letters, then a valid  
selection has not been  
made.  
•
Tap  
. SmartS Professional will calculate the route and  
display the current street on the Navigation Map Screen. The  
map will show the Waiting for GPS icon until a fix is found.  
•
Tap  
. SmartS Professional will not calculate the route, but  
will simply display the address on the Map Screen. From here  
you can select this address as your destination or move around  
the map to find a different destination. Refer to Section 9-7  
Using the Pop-UP Menu to Plan a Route for more information.  
•
Tap  
. SmartS Professional will save the destination address  
as a Favorite. The address will be available in the Favorite List  
(refer to Section 9-5 Navigating to a Favorite).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Navman SmartS™ Professional for Palm OS®  
5
9-3 Navigating to an Intersection  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
To enter the intersection of two streets as your destination:  
1
From the MAIN MENU, select DESTINATION, then INTERSECTION.The Destination Intersection screen is  
displayed.  
Tip: Step 3 is optional,  
but can be useful if your  
map area is large or the  
street is not uniquely  
named.  
2
3
Select COUNTRY from the drop-down box.  
Select AREA - this could be a town, city, state or county. Start by entering the first few letters of the Area and then  
use the drop down box to select from the appropriate options. Selecting an Area before entering the road name is  
optional but advisable for large maps.  
4
Select the intersecting roads by entering the road names. SmartS Professional will display the first twenty  
matching roads in the drop down box. Tap a road to select it and complete the intersection address.  
Tip: If any of the  
destination fields  
are not presented in  
capital letters, then a  
valid selection has not  
been made.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Navman SmartS™ Professional for Palm OS®  
5
5
Once the intersection is selected, choose from one of the following:  
•
Tap  
. SmartS Professional will calculate the route and  
display the current street on the Navigation Map Screen. The  
map will show the Waiting for GPS icon until a fix is found.  
•
Tap  
. SmartS Professional will not calculate the route, but  
will simply display the address on the Map Screen. From here  
you can select this address as your destination or move around  
the map to find a different destination. Refer to Section 9-7  
Using the Pop-Up Menu to Plan a Route for more information.  
•
Tap  
. SmartS Professional will save the destination address  
as a Favorite. The address will be available in the Favorite List  
(refer to Section 9-5 Navigating to a Favorite).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Navman SmartS™ Professional for Palm OS®  
5
9-4 Navigating to Points of Interest  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
The map information that you are using also has a large number of “Points of Interest”, or POIs stored for your  
convenience. A Point of Interest (POI) is any named site, feature, landmark or public venue. There are thousands of  
Points of Interest in larger cities, so they are sorted into categories. POI categories may be hotels, schools or parks to  
name just a few.  
1
From the MAIN MENU, select DESTINATION, then POINTS OF INTEREST. the Points of Interest Screen is  
displayed.  
2
3
4
5
Select COUNTRY from the drop-down box.  
Select the CATEGORY from the drop-down box.  
Select TYPE from the drop-down box. This will narrow down the number of options available.  
Select AREA - this could be a town, city, state or county. Start by entering the first few letters of the Area and then  
use the drop down box to select from the appropriate options.  
Tip: Step 5 is optional,  
but can be useful if  
your map area is large.  
6
Once you have entered all the information in the POI Screen, tap  
to display all the search results.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Navman SmartS™ Professional for Palm OS®  
5
7
Select a POI from the list. Alternatively, if you know the name of the POI you are interested in, enter the first few  
letters of the POI to narrow down the list.  
Example: if you wish  
to locate a hotel in  
a particular area,  
use this function by  
selecting CATEGORY  
: Accommodation,  
TYPE : Hotel or Motel.  
Enter the area of  
interest and select  
from the list of hotels  
provided.  
Note: To display the  
POI icon on the map,  
the required POI  
category must be  
enabled on the POI  
setup screen. Refer to  
Section 13.6 for more  
information.  
8
Choose one of the following:  
•
Tap  
. SmartS Professional will calculate the route and display the calculated route on the Navigation  
Map Screen. The map will show the Waiting for GPS icon until a fix is found.  
•
Tap . SmartS Professional will not calculate the route, but will simply display the address on the Map  
Screen. From here you can select this address as your destination using the "tap-and-hold" feature, or  
move around the map to find a different destination. Refer to Section 9-7 Using the Pop-Up Menu to Plan a  
Route for more information.  
•
•
Tap  
Tap  
. This displays further information such as name, address, zip code etc.  
to review or change the POI search to be performed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
Navman SmartS™ Professional for Palm OS®  
5
9-5 Navigating to a Favorite  
SmartS Professional allows you to store Favorite destinations, to save you from re-entering the location again. Use  
Quick Navs for your 3 most regular locations, and store other commonly used locations as Favorites.  
1
2
From the MAIN MENU, tap DESTINATION, then FavoriteS.  
Tap the destination from the Favorites List to select your destination.  
Tip: You can also  
create a Favorite by  
selecting a road on  
the Map Screen and  
tapping and holding.  
See Section 9-7 Using  
the Pop-Up Menu  
to Plan a Route for  
further information.  
3
Choose one of the following:  
•
Tap  
Map Screen.  
. SmartS Professional will calculate the route and display the current street on the Navigation  
Sony Car Cradle  
Users:  
and  
are  
•
Tap  
. SmartS Professional will not calculate the route, but will simply display the address using the  
restricted functions.  
Refer Section 6-1.  
Map Screen. From here you can select this address as your destination or move around the map to find a  
different destination. Refer to Section 9-7 Using the Pop-Up Menu to Plan a Route for more information.  
•
•
Tap  
. This will delete your saved Favorite from the Favorite list.  
Tap  
. This is where your destination is displayed, and you are able to change details such as the name or  
type of Favorite that you have assigned. Refer to Section 11-2 Editing or Deleting a Saved Favorite for more  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Navman SmartS™ Professional for Palm OS®  
5
9-6 Navigating to a Recent Destination  
Destinations that you have recently used are stored inside your Handheld so that you can quickly access them.  
1
From the MAIN MENU, tap DESTINATION, then RECENT. (Recent destinations can also be selected by tapping  
MAIN MENU, then QUICK NAVS then RECENT).  
2
Use the scroll bars to scroll through the list of recent addresses, then tap on your preferred destination.  
Note: SmartS  
Professional saves  
the locations of  
destinations you have  
recently travelled to.  
As the list grows,  
SmartS Professional  
will replace the oldest  
destination with the  
most recent.  
3
Choose one of the following:  
•
Tap  
. SmartS Professional will calculate the route and display the destination on the Navigation Screen.  
(GPS fix required)  
•
Tap  
. SmartS Professional will not calculate the route, but will simply display the address using the  
Map Screen. From here you can select this address as your destination or move around the map to find a  
different destination. Refer to Section 9-7 Using the Pop-Up Menu to Plan a Route for more information.  
•
Tap  
to return to the previous screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
Navman SmartS™ Professional for Palm OS®  
5
9-7 Using the Pop-Up Menu to Plan a Route  
You may prefer to program your destination directly from the Map Screen. Generally you will use this option if you know  
the area in which your destination is, or if you have selected from a previous entry screen. SmartS Professional will  
allow you to scroll around a map and pick a point on the map. SmartS Professional will automatically load the address  
details for you and plan a route to your selected destination.  
1
2
From the MAIN MENU, tap on MAP. You are now in the Map Screen.  
Navigate around the map. To scroll around the map, use the stylus to drag a point on the map across the screen.  
As you drag the point around, the map will scroll to reveal more map area.  
3
4
Zoom in and out as required. Zoom by tapping on the  
hardware buttons on your handheld.  
or  
buttons on the screen, or by using relevant  
To select a destination, tap and hold any destination (road or Point of Interest) with the stylus, then select  
“Navigate To” from the pop-up menu. This sets your current location as your departure point and will calculate the  
route and display the destination on the Navigation Screen.  
This is a “North Up”  
map, where the map is  
orientated with North at  
the top of the screen  
Select a different view  
Return to the  
The name of the  
previous screen  
destination selected is  
shown on the top of the  
Zoom controls  
pop-up menu  
Tap this icon to  
recenter the map on  
your GPS position  
Map scale  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Navman SmartS™ Professional for Palm OS®  
5
9-8 Route Planning Without a GPS Fix  
Routes can also be planned without a GPS fix from the pop-up menu.  
1
Select a departure location by tapping and holding on a street/road on the Map Screen and then selecting "Set as  
Departure" from the pop-up menu.  
2
To select a destination location, either:  
•
•
Tap and hold on a street/road and select "Navigate To" from the pop-up menu.  
OR select a destination as described in Section 9 Setting Your Destination.  
3
The route will be calculated and displayed on the Navigation Screen.  
Step 1:  
Tap on "Set as Departure"  
Step 2:  
Tap on "Navigate To"  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Navman SmartS™ Professional for Palm OS®  
5
Viewing Your Route  
10  
Once you have selected your destination and SmartS Professional has calculated your route, there are four different  
ways that you can view instructions for your route. Cycle through the following three views by tapping on the  
Each view is described below.  
icon.  
Note: All map views  
are accompanied  
by audible  
announcements of  
your next turn.  
•
•
•
The MAP view displays your route on a map which is always oriented North.  
The NAVIGATION view displays your route on map which is always oriented in the direction in which you are travelling.  
The NEXT INSTRUCTION view is a simple graphical display showing the direction and distance to your next turn.  
An alternative way of viewing your route is to display an INSTRUCTION LIST. This view displays the list of remaining  
turns to your destination, with the street name, direction of turn and distance to go. Refer to Section 10-2 for further  
details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Navman SmartS™ Professional for Palm OS®  
5
10-1 Map View  
The Map view is always oriented to the North, and shows your current position and surrounding street names. If you  
have already programmed a route, the route and all turns are highlighted. You can use the Map view to quickly set your  
departure point, and navigate to any destination.  
1
2
To view the route, tap on the  
Zoom in and out as required.  
symbol to cycle through the screens until the Map Screen is displayed.  
Your current position is  
marked with this icon.  
Blue indicates a valid  
GPS fix, red indicates no  
GPS fix  
Note: To cancel your  
current route at any  
time, tap-and-hold on  
the screen, and select  
Cancel Route from  
the pop-up menu.  
Alternatively, simply  
start planning a new  
route and you will be  
prompted to cancel  
the current route.  
Select a different map screen  
Return to the  
Main Menu  
Your planned route and  
turns are highlighted  
Zoom controls  
Tap this icon to  
recenter the map on  
your GPS position  
Note: You can use the  
Map view to quickly  
set your departure  
point and navigate to  
any destination. Refer  
to section 9.7 Using  
the Pop-Up Menu to  
Plan a Route for more  
information.  
Map scale  
The street you  
are travelling on  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Navman SmartS™ Professional for Palm OS®  
5
10-2 Navigation View  
The Navigation view is displayed when you calculate a route, except that the map is always oriented in the direction in  
which your vehicle is travelling. This is often an easier way to keep your bearings.  
Note: to view this  
screen, a route must  
be calculated.  
1
2
To view the route, tap on the  
Zoom in and out as required.  
symbol to cycle through the screens until the Navigation Screen is displayed.  
Next instruction and  
Road Name  
Direction of next  
turn. Tap this icon to  
announce the current  
instruction  
Turns are highlighted  
in green  
The map automatically  
zooms in or out depending  
on the speed of travel.  
The map may be zoomed  
manually but will snap back  
to the auto zoom level after a  
short delay.  
Your current position is  
marked with this icon,  
blue indicates a valid  
GPS fix, red no GPS fix  
Map scale  
Distance to next turn  
Tap this button to cycle through the following  
data display options:  
The street you  
are travelling on  
• Current speed (displayed)  
• Current time  
• Current bearing / heading (HDG)  
• Distance to go to destination (DTG)  
• Expected time of arrival at destination (ETA)  
• Time to go to destination (TTG)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Navman SmartS™ Professional for Palm OS®  
5
ꢀ
10-3 3D Navigation Screen  
Similar to the Map Screen, the 3D (three dimensional) Navigation screen is displayed when you calculate a  
route, except that the map is always oriented to the direction in which your vehicle is travelling. This is often  
an easier way to keep your bearings.  
Note: to view this  
screen, a route must  
be calculated.  
You can cancel your  
current route at any  
time by starting to plan  
another route (e.g. by  
selecting DESTINATION  
or QUICK NAV from the  
MAIN MENU.  
Next instruction and Road  
Name  
Direction of next  
turn. Tap this icon to  
announce the current  
instruction  
Your next turn is  
highlighted in green  
Tip: When the angle  
option is selected,  
the up and down  
buttons can be used  
to reset the angle to  
0º, which transforms  
the 3D screen view  
to a 2D view.  
Tap this button to cycle through the  
following data display options:  
Your current position is  
marked with this icon, blue  
indicates a valid GPS fix, red  
no GPS fix  
• Speed  
• Time  
• Angle  
Tap to view the Route  
Summary information.  
• Distance to go to destination (DTG)  
• Expected time of arrival at destination (ETA)  
• Time to go to destination (TTG)  
The street you are  
travelling on  
The DEFAULT 3D ANGLE of the 3D  
Navigation screen can be adjusted by  
tapping to select the drop down box and  
then selecting the preferred default 3D angle.  
Each time SmartS is opened this default  
angle is applied to the 3D navigation screen.  
If an angle of 0º is selected, then the 3D  
Navigation screen shows the map as a two  
dimensional (2D) display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
Navman SmartS™ Professional for Palm OS®  
5
10-4 Next Instruction View  
Note: to use this  
view, a route must be  
calculated.  
This view shows the information that you need for the next turn, the direction of the turn and the distance to the turn.  
1
To view the route, tap on the  
displayed.  
symbol to cycle through the screens until the Next Instruction Screen is  
Next instruction  
Direction of next  
turn. Tap this icon to  
announce the current  
instruction  
Distance to next turn  
The street you are  
travelling on  
Tap on these buttons to cycle through the  
following data display options:  
• Current speed  
• Current time  
• Current bearing / heading (HDG)  
• Distance to go to destination (DTG)  
• Expected time of arrival at destination (ETA)  
• Time to go to destination (TTG)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
Navman SmartS™ Professional for Palm OS®  
5
10-5 Instruction List  
Note: to view this  
screen, a route must  
be calculated.  
The Instruction List displays the list of the remaining turns to your destination with the direction of the turn, the next  
street name and the distance to the turn. The very next turn is highlighted.  
1
2
From the MAIN MENU, select INSTRUCTION LIST.  
You can scroll up and down the instruction list by dragging the stylus up and down the scroll bar.  
The distances shown  
in the right column are  
measured between the  
current location and  
each turn.  
Scroll bar  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
Navman SmartS™ Professional for Palm OS®  
5
Tip: This function can  
10-6 Back-On-Track™ Feature  
be disabled in the  
SETUP Menu.  
SmartS Professional is designed to re-plan your route automatically if you take a wrong turn. A ? symbol will display  
in place of the Direction Of Next Turn Icon. The re-routing indicator will display to show that a new route is being re-  
calculated.  
Re-routing indicator  
Re-routing indicator  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
Navman SmartS™ Professional for Palm OS®  
5
Editing, Deleting and using Favorites and Quick Navs  
11  
destinations to  
Favorites by selecting  
Recent - Show then  
tapping and holding to  
save as a Favorite.  
Tip: Convert recent  
SmartS Professional allows you to save destinations as Favorites, so you can access them quickly without re-entering  
address information. You can also use Quick Navs to save the three most commonly used Favorites, as Quick Navs can  
be accessed with less keystrokes than Favorites.  
11-1 Adding a New Favorite  
Tip: Favorites can be  
accessed through  
the DESTINATION-  
FavoriteS menu.  
1
2
3
4
From the MAIN MENU, tap on MAP. You are now in the Map Screen.  
Navigate around the map by dragging the stylus across the screen.  
Zoom in and out as required.  
Tap and hold the destination you wish to select (eg. a road, Point of  
Interest or intersection), then tap “Add to Favorites”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
Navman SmartS™ Professional for Palm OS®  
5
11-2 Editing or Deleting a Saved Favorite  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
Follow these instructions to delete Favorites, personalise them with a nickname, or change them to Quick Navs.  
1
2
From the MAIN MENU, select DESTINATION, then FavoriteS.  
Select the destination that you wish to edit/delete from the Favorite List.  
3
4
To delete the destination from the Favorite List, simply tap on . Tap on OK when prompted to confirm.  
You can customize the look of each of your Favorites by giving the destination a “nickname” (e.g. WORK) and  
assigning an icon. You can also choose to save the Favorite as one of three Quick Nav destinations, which means  
that you can access it more quickly through the Quick Navs menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
Navman SmartS™ Professional for Palm OS®  
5
Example: you may  
want to save your own  
address as a Quick  
Nav, and name it  
HOME.  
To make any of these changes, tap  
.
•
•
To change the name of your Favorite or Quick Nav, type it into the Name field.  
To change the type of Favorite or Quick Nav, tap on the "Save as" drop-down box to save as a Favorite or  
one of three Quick Navs.  
•
•
To change the icon of the Favorite or Quick Nav, either tap on the displayed icon and choose from the pop-  
up list provided.  
Tap  
to save the changes you have made and return to the previous screen.  
Tip: Quick Navs can  
be deleted after they  
have been ‘Saved’ as  
a Favorite by using  
.
Select this to give your  
Favorite a ‘nickname’  
Select from the drop-  
down box to save  
as a Quick Nav or  
Favorite  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
Navman SmartS™ Professional for Palm OS®  
5
11-3 Quick Navs  
Three of your most frequently used destinations can be stored to save time. Once saved, your Quick Navs can be  
accessed quickly through the Quick Nav menu with the minimum of key presses and without having to re-enter any  
information. Quick Navs also give access to the return trip function and recent destination.  
1
From the MAIN MENU, select QUICK NAV.  
Tip: To return to any  
of these destinations  
simply tap on the  
desired destination in  
the recent list.  
2
3
4
To go straight to one of your Quick Nav destinations, simply tap on QUICK NAV. SmartST Professional will  
calculate the route and display the destination on the Navigation Screen.  
To access the Recent Destinations list, tap on RECENT. Refer to Section 9-6 Navigating to a Recent Destination  
for more information.  
If you tap on RETURN TRIP, SmartST Professional will calculate a route from your current position to the  
departure point of your previous route. The route is displayed on the Navigation Screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
Navman SmartS™ Professional for Palm OS®  
5
Using the GPS Status Information  
12  
12-1 GPS Reception  
The GPS Status Screen tells you how well you are receiving the GPS satellite information. SmartST Professional relies  
on the reception of signals transmitted by the Global Positioning System satellites orbiting the earth. This display shows  
a visual representation of the number of satellites that your handheld is receiving information from.  
1
From the MAIN MENU, select GPS STATUS.  
Latitude / longitude of current  
position. Units can be displayed in:  
(a) degrees, mins and decimal secs;  
(b) decimal degrees; OR  
(c) degrees and decimal minutes.  
Tap to switch between these unit  
displays.  
North pointing compass  
Ground speed  
Tip: If you are having  
trouble obtaining a  
GPS fix, you can use  
this screen to review  
the GPS satellite  
reception.  
A green circle means the  
GPS receiver has a valid  
fix, red means no valid fix  
Each segment represents a satellite,  
and the color represents the  
satellite's status. See below for a  
description of the different satellite  
statuses.  
Tip: The GPS receiver  
must be locked  
UTC time and date  
Number of satellites  
onto a minimum  
of 3 satellites for  
used in GPS fix  
successful operation.  
Use this box to  
connect the GPS  
receiver.  
Click to exit screen  
Type of fix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
Navman SmartS™ Professional for Palm OS®  
5
Tip: In practice less  
than 12 satellites  
are tracked by the  
GPS receiver due to  
satellite positioning.  
Latitude and longitude are displayed along with a North-pointing compass, the heading in degrees and ground speed.  
The 12 satellites that could be viewed from your current position are shown as segments. The satellites are represented  
as follows:  
•
•
•
A yellow segment indicates a satellite that is being tracked but is not being used to determine your position.  
A red segment indicates a satellite that is being used to determine a two dimensional (2D) fixed position.  
A green segment indicates a satellite that is being used to determine a valid (3D) fixed position.  
The circle underneath the segment display is green when there is a valid fix (2D or 3D), and red when there is no fix  
available. While a 2D fix is sufficient to maintain a valid fix, a 3D fix is more accurate.  
Tip: The number of  
indicated satellites  
depends on your GPS  
receiver.  
The time and date are displayed in UTC (Coordinated Universal Time), where UTC is the current term for what was  
commonly referred to as Greenwich Mean Time (GMT).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
Navman SmartS™ Professional for Palm OS®  
5
12-2 GPS Status Messages  
The GPS status messages are displayed on the three navigation screens (Map screen, Navigation screen, and the Next  
Instruction screen). The messages listed in the table below provide you with feedback on the status of the GPS receiver  
connection.  
Status Message  
Meaning  
Suggested Action  
No GPS Data  
A GPS connection has been Check that the handheld is correctly connected and  
enabled, but no GPS data is configured - see Section 3 for correct settings.  
being received.  
Waiting for GPS  
A GPS connection has been Time to acquire a GPS fix will vary according to  
enabled and GPS data is  
being received, but a GPS  
position fix has not been  
established yet.  
the satellite constellation. Please refer to your GPS  
Hardware guide for more information.  
Current street name  
displayed  
GPS data is being received, None  
and you have a valid GPS  
position fix.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
Navman SmartS™ Professional for Palm OS®  
5
Modifying the Settings  
13  
Note: SmartS  
SmartS Professional has a number of Settings that you can alter:  
Professional is already  
programmed with  
default settings, which  
can be adjusted to suit  
your preference.  
•
•
•
•
•
•
•
About settings: Display the version number of the SmartS Professional software you are running.  
GPS settings: Configure the communications settings for your GPS Receiver.  
Display settings: Change the map colors, select fast map panning or enable/disable the startup tutorial.  
Guidance settings: Choose the distance units (kilometres or miles) or change the voice guidance settings.  
Map settings: Select the map regions you need to plan your route.  
POI settings: Select the Points of Interest that are relevant to you.  
Routing settings: Select "shortest distance" or "fastest time" route planning, avoid certain road conditions or  
enable/disable the Back-On-Track™ feature.  
13-1 About Settings  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
View the software version, map data and application copyright information  
relating to the SmartS Professional software.  
1
2
From the MAIN MENU, select SETUP.  
From the drop down list, select ABOUT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
Navman SmartS™ Professional for Palm OS®  
5
13-2 GPS Settings  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
For Bluetooth and serial GPS users, use this screen to configure the GPS  
port. Refer to Section 7-3 Configuring the GPS Receiver.  
If you are experiencing difficulty with your GPS receiver, you may be asked  
by Technical Support Staff to switch on the GPS Logging option:  
1
2
3
From the MAIN MENU, select SETUP.  
From the drop down list, select GPS.  
Enable GPS Logging by checking the "GPS Logging" box.  
13-3 Display Settings  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
If you find that the display is difficult to see in certain light conditions, use  
this function to change the color scheme. You can also enable / disable the  
tutorial that is automatically run at startup of SmartS Professional.  
1
2
3
From the MAIN MENU, select SETUP.  
From the drop down list, select DISPLAY.  
Modify the settings as required:  
Note: Backlight  
brightness can  
also be modified  
to suit viewing  
conditions. Refer  
to your Handheld  
documentation for  
instructions.  
•
Select either Day or Night from the Map Colors menu to  
improve the contrast in light and dark conditions.  
•
Select your preferred Map Color Scheme by selecting from the  
drop-down menu.  
Tip for Sony Car  
Cradle Users: Map  
colors can also be  
switched depending  
on day/night mode of  
the Car Cradle  
•
To enable / disable the Tutorial check or uncheck the “Show at  
startup” checkbox.  
•
To enable / disable fast map panning, check/ uncheck the "Fast  
map panning" box.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
Navman SmartS™ Professional for Palm OS®  
5
This feature will speed up map panning when viewing or planning a route  
across a large or high density map area. With normal panning mode, the  
map is updated repeatedly as you drag the stylus across the screen. With  
fast map panning, a line is drawn from when you start to drag the stylus to  
the end position - only then is the map redrawn.  
13-4 Guidance Settings  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
This is where the voice scheme and distance units can be set.  
1
2
3
From the MAIN MENU, select SETUP.  
From the drop down list, select GUIDANCE.  
Modify the settings as required:  
Note: These changes  
will only take effect  
when the next route is  
planned.  
•
•
•
Choose the Distance Units that you require – all measurements  
(e.g. Distance to Go), map scales, navigation screens and voice  
announcements can be programmed as kilometres or miles.  
Choose the type of voice you prefer from the Voice Scheme  
menu by tapping the drop-down box to select the voice scheme  
of choice.  
Change the volume of the voice instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
Navman SmartS™ Professional for Palm OS®  
5
13-5 Map Settings  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
This screen shows all the map regions that have been installed in the  
memory cards.  
1
2
3
From the MAIN MENU, select SETUP.  
Tip: Your Handheld  
will run faster with  
less map regions  
selected. To optimise  
performance, select  
only the map regions  
you require to plan  
your route.  
From the drop down list, select MAPS.  
Select the Storage Location drop-down box to display the map  
regions for each storage area (only applicable for handhelds with  
multiple memory cards).  
4
Select and clear map regions with the check boxes as required.  
13-6 POI (Points of Interest) Settings  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
There are usually a very large number of Points of Interest in any one  
geographical region. This function allows you to select only those  
categories that you might need. For example you may be interested only in  
accommodation and entertainment venues, and may want to disable such  
categories as amenities and institutions.  
Tip: For ease of  
viewing, select only  
the most useful POI  
categories.  
1
2
3
From the MAIN MENU, select SETUP.  
From the drop down list, select POI.  
Enable the “Show Icons on Map” option from the Display menu if you  
want the Points of Interest to be displayed on your maps.  
4
From the Categories menu, select the Points of Interest Categories  
that you wish to enable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
Navman SmartS™ Professional for Palm OS®  
5
13-7 Routing Settings  
Sony Car Cradle  
Users: Restricted  
Function. Refer  
Section 6-1.  
There are a number of options that affect the way that SmartS Professional  
plans your route. You may be conscious of time and therefore want to get  
to your destination by the fastest route possible, or you may be conscious  
of distance and wish to take the shortest route. Use this function to change  
the route settings to suit your needs.  
1
2
From the MAIN MENU, select SETUP, then ROUTING.  
Modify the settings as required:  
Note: The AUTO  
RE-ROUTING function  
automatically updates  
your route if you take  
a wrong turn.  
•
•
Select either QUICKEST time or SHORTEST distance.  
Enable or disable AVOID TOLL ROADS and AVOID URBAN  
AREAS from the Route Options menu if required.  
•
•
Enable or disable the ROUTE DEMONSTRATOR. This allows  
you to demonstrate a planned route prior to driving it.  
Enable or disable the Back-On-Track™ AUTO RE-ROUTING  
feature from the Rerouting menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
Navman SmartS™ Professional for Palm OS®  
5
Accessories  
14  
14-1 Memory Cards  
Maps must be stored on memory cards. Please refer to your handheld  
documentation for suitable memory card options and installation  
instructions.  
14-2 Memory Card Writers  
The memory card writer connects to your computer via a USB port, and  
is used in conjunction with the SmartS Professional Desktop application  
to download maps to a memory card.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
15  
Where will SmartST Professional for Palm OS® 5 work?  
As long as the GPS receiver has a clear view of the sky, it will work accurately anywhere on earth. Note: in order for the  
GPS position to be displayed on a map, the relevant map will need to be installed on the memory card.  
How accurate is GPS?  
Accuracy of any GPS system will vary slightly over time. It is accurate to within 5 m (16 feet) for 95% of the time in  
normal usage.  
How detailed are the maps supplied with SmartST Professional?  
The SmartS Professional maps contain street level detail allowing door to door navigation where data is available.  
Maps also have points of interest (POIs) such as hotels, railway stations and airports.  
How can I make SmartST Professional run faster?  
If you are finding that SmartS Professional is running slowly, it may be because the software is processing a large  
amount of map data. Check that only the map regions you require for route planning are selected.  
Refer to Section 13-5 Map Settings for more information.  
For optimum performance, Navman recommend running SmartS Professional independently of other applications.  
Please refer to the documentation supplied with your handheld for information on adjusting the backlighting settings or  
adjusting battery and external power settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
Navman SmartS™ Professional for Palm OS®  
5
End User License and Warranty Agreement  
16  
IMPORTANT - Please read carefully  
NAVMAN (THE LICENSOR) IS WILLING TO LICENSE THE SMARTS™ PROFESSIONAL SOFTWARE (THE SOFTWARE) TO YOU (THE  
CUSTOMER) ONLY IF YOU ACCEPT ALL THE TERMS OF THIS LICENCE. PLEASE READ THE TERMS CAREFULLY, BECAUSE USING  
THIS SOFTWARE WILL BE DEEMED TO BE YOUR ACCEPTANCE THAT YOU ARE USING IT ON THE FOLLOWING TERMS.  
IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENCE DO NOT INSTALL OR USE THE SOFTWARE AND RETURN THIS PRODUCT  
PROMPTLY, INCLUDING ALL PACKAGING AND WRITTEN MATERIALS, TO THE LICENSOR’S REPRESENTATIVE AND ANY AMOUNT  
YOU MAY HAVE PAID WILL BE REFUNDED TO YOU (LESS ANY DELIVERY AND HANDLING CHARGES).  
1. The Licensor grants to the Customer a non-exclusive licence to use: (a) one copy of the Software on one of the Customer’s handheld  
devices; and (b) the accompanying materials, including any manuals contained in the Software (the Materials), in accordance with the  
terms and conditions of this Licence.  
2. Where the Customer uses the Software on a handheld or any other device (the Device) in a vehicle, the Customer must not place,  
secure or use the handheld device in a manner that may cause accidents, personal injury or property damage or in any way obstruct  
the visibility of the Customer. The Customer is solely responsible for observing safe driving practices and will not operate the Software  
while operating a vehicle.  
3. The copyright and all other intellectual property rights in the Software and Materials (including any enhancements or modifications) are  
vested in the Licensor. The Customer must not rent, lease, reproduce, translate, adapt, vary, reverse-engineer or modify the Software  
or Materials nor communicate the same to any person other than in accordance with the terms of this Licence.  
4. The Customer may not copy the Software or Materials except that one copy of the Software may be made to the extent that such  
copying is necessary for the Customer’s own backup purposes.  
5. Except for the warranty provided by the Licensor for the product that includes the Software the Licensor expressly excludes to the  
fullest extent permitted by law all representations or warranties, express or implied (except any which may not lawfully be excluded),  
including the implied warranties of merchantability and fitness for a particular purpose.  
6. The Licensor will not in any circumstances be liable under the law of tort, contract or otherwise for any indirect or consequential loss  
or damage, including any loss of profits, however caused, arising in connection with the use of, or inability to use, the Software.  
If any limitation or exclusion or liability contained in this Licence is held to be invalid for any reason and the Licensor becomes liable  
for loss or damage that would otherwise have been excluded, that liability will be limited to the total amount actually paid by the  
Customer for the Software.  
7. The Licensor may terminate this Licence immediately if the Customer breaches any of its obligations under this Licence. Immediately  
following termination of this Licence the Customer must deliver to the Licensor’s Representative, or destroy all copies of, the Software  
and Materials in whatever form possessed by the Customer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
Navman SmartS™ Professional for Palm OS®  
5
Limited Warranty:  
IMPORTANT: The following terms and conditions may vary from country to country. Please check with Your Navman dealer from where  
You purchased the product.  
Hardware Product: Navman warrants its products to be free from defects in materials or workmanship under normal use for two years  
from the date of purchase (the Warranty Period) to the original owner (You). To claim under this warranty, You must return the product to  
the place of purchase, or a service centre approved by Navman (Service Centre). You must produce an original sales receipt as proof of  
purchase. You will be solely responsible for all shipping charges, freight, insurance and proper packaging to prevent breakage in transit.  
Navman will, at its discretion, repair or replace any defective product or its components at no cost to You for parts and labour. The  
replacement product or component takes on the warranty status of the original product or component. This is Your exclusive remedy for  
defective products.  
Limitations: This warranty does not apply to products that have been damaged or rendered defective: (a) as a result of incorrect  
installation, misuse, mishandling, misapplication, accident, abuse, breakage or other external causes; (b) by operation outside the usage  
specifications stated in the product documentation; (c) by modification or service other than by Navman or its approved Service Centres.  
Software Product: Navman warrants that (a) the software will perform substantially in accordance with the accompanying written  
materials for a period of 90 days from the date of purchase, and (b) any technical support provided by Navman or its approved Service  
Centres shall make commercially reasonable efforts to solve any problem or issues. Some countries, states and jurisdictions do not allow  
limitations on duration of an implied warranty, so the above limitation of 90 days may not apply to You.  
Limitation of Liability  
To the fullest extent permitted by law, Navman will not be liable in any event, whether in tort (including negligence), contract or otherwise for  
any damage including loss of profits, any consequential, indirect or special damage, loss or injury of any kind suffered by You or any other  
person. Except as expressly set out in this warranty, Navman makes no other warranties, express or implied, including any implied warranties  
of merchantability and fitness for a particular purpose. If any limitation or exclusion or liability contained in this warranty is held to be invalid for  
any reason and Navman becomes liable for loss or damage that would otherwise have been excluded, such liability will be limited to the total  
amount actually paid by You for the product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
Navman SmartS™ Professional for Palm OS®  
5
16-2 FCC Statement  
Applicable to all Navman GPS Receivers.  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference  
in a normal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
•
•
•
•
•
Re orient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an output on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced technician for help.  
A shielded cable must be used when connecting a peripheral to the serial ports.  
16-3 Contact Us  
For technical support, frequently asked questions, software updates and additional information, visit our website  
- www.navman.com.  
Navman USA Ltd.  
27142 Burbank  
Foothill Ranch  
CA 92610  
USA  
Navman Europe Ltd.  
Suite 4 G  
Gatwick House  
Peeks Brook Lane  
Horley, Surrey  
RH6 9ST  
Navman Australia Pty. Ltd.  
Unit 2, 5-13 Parsons St.,  
Rozelle, NSW 2039  
Australia  
Phone Toll Free (612) 9818 8382  
Phone Toll Free (1) 866-9-NAVMAN  
(866 9 628626)  
United Kingdom  
Phone Toll Free (44) 1293 449 882  
E-mail: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
Navman SmartS™ Professional for Palm OS®  
5
16-4 Copyright  
© 2004 Navman NZ Limited. Navman is a registered trademark of Navman NZ Limited. SmartSꢀand Back-On-Track  
are trademarks of Navman NZ Limited. All rights reserved.  
Microsoft® Windows® 98, ME, 2000 or XP, Internet Explorer are registered trademarks of Microsoft Corporation.  
Acrobat® Reader® is a registered trademark of Adobe Systems Incorporated. All rights reserved.  
Palm OS, Hotsync, Palm, Palm Powered and Palm Tungsten are trademarks of PalmSource, Inc.  
© 2003 Whereis™ Sensis is a trademark of Telstra Corporation Ltd., used under license.  
© 2003 Tele Atlas, s-Hertogenbosch, The Netherlands.  
© Crown Copyright, Ordnance Survey, License Number 43553U2.  
© 1984-2004 Tele Atlas North America, Inc.  
© 2004 InfoUSA. All rights reserved.  
© 2004 DMTI Spatial and © 2004 Tele Atlas N.A., Inc.  
© 2004.Sony Corporation, Sony, CLIÉ, JogDial and their logos are trademarks of Sony Corporation.  
All other trademarks are the property of their respective owners.  
For optional Navman GPS Receivers.  
FCC  
022116  
Published in New Zealand  
MN000226B  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miglia Technology Cordless Telephone Cordless Phone User Manual
Milan Technology Cable Box MIL 140TRM User Manual
Miller Electric Welding System Big 40 WG User Manual
Navigon GPS Receiver 8100T User Manual
Nextar MP3 Player MA715 User Manual
Olympus Camcorder MAJ 222 User Manual
Optimus Speaker 40 1425 User Manual
Oregon Scientific Weather Radio BA2000 User Manual
Panasonic Answering Machine KX TSC11 User Manual
Panasonic Cordless Telephone KX TGC212E User Manual