Important Information
Warranty
The NI PXI-8184/8185 embedded PXI computers are warranted against defects in materials and workmanship for a period of one year from
the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that
proves to be defective during the warranty period. This warranty includes parts and labor.
The media on which you receive National Instruments software are warranted not to fail to execute programming instructions, due to defects
in materials and workmanship, for a period of 90 days from date of shipment, as evidenced by receipts or other documentation. National
Instruments will, at its option, repair or replace software media that do not execute programming instructions if National Instruments receives
notice of such defects during the warranty period. National Instruments does not warrant that the operation of the software shall be
uninterrupted or error free.
A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the outside of the package before
any equipment will be accepted for warranty work. National Instruments will pay the shipping costs of returning to the owner parts which are
covered by warranty.
National Instruments believes that the information in this document is accurate. The document has been carefully reviewed for technical
accuracy. In the event that technical or typographical errors exist, National Instruments reserves the right to make changes to subsequent
editions of this document without prior notice to holders of this edition. The reader should consult National Instruments if errors are suspected.
In no event shall National Instruments be liable for any damages arising out of or related to this document or the information contained in it.
EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CUSTOMER’S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE PART OF
NATIONAL INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE CUSTOMER. NATIONAL INSTRUMENTS WILL NOT BE LIABLE FOR
DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY
THEREOF. This limitation of the liability of National Instruments will apply regardless of the form of action, whether in contract or tort, including
negligence. Any action against National Instruments must be brought within one year after the cause of action accrues. National Instruments
shall not be liable for any delay in performance due to causes beyond its reasonable control. The warranty provided herein does not cover
damages, defects, malfunctions, or service failures caused by owner’s failure to follow the National Instruments installation, operation, or
maintenance instructions; owner’s modification of the product; owner’s abuse, misuse, or negligent acts; and power failure or surges, fire,
flood, accident, actions of third parties, or other events outside reasonable control.
Copyright
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying,
recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National
Instruments Corporation.
Trademarks
CVI™, LabVIEW™, Measurement Studio™, National Instruments™, National Instruments Alliance Partner™, NI™, NI-488™, NI-488.2™
ni.com™, NI-DAQ™, NI-VISA™, RTSI™, and SCXI™, are trademarks of National Instruments Corporation.
,
Product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no
agency, partnership, or joint-venture relationship with National Instruments.
Patents
For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txtfile
on your CD, or ni.com/patents.
WARNING REGARDING USE OF NATIONAL INSTRUMENTS PRODUCTS
(1) NATIONAL INSTRUMENTS PRODUCTS ARE NOT DESIGNED WITH COMPONENTS AND TESTING FOR A LEVEL OF
RELIABILITY SUITABLE FOR USE IN OR IN CONNECTION WITH SURGICAL IMPLANTS OR AS CRITICAL COMPONENTS IN
ANY LIFE SUPPORT SYSTEMS WHOSE FAILURE TO PERFORM CAN REASONABLY BE EXPECTED TO CAUSE SIGNIFICANT
INJURY TO A HUMAN.
(2) IN ANY APPLICATION, INCLUDING THE ABOVE, RELIABILITY OF OPERATION OF THE SOFTWARE PRODUCTS CAN BE
IMPAIRED BY ADVERSE FACTORS, INCLUDING BUT NOT LIMITED TO FLUCTUATIONS IN ELECTRICAL POWER SUPPLY,
COMPUTER HARDWARE MALFUNCTIONS, COMPUTER OPERATING SYSTEM SOFTWARE FITNESS, FITNESS OF COMPILERS
AND DEVELOPMENT SOFTWARE USED TO DEVELOP AN APPLICATION, INSTALLATION ERRORS, SOFTWARE AND
HARDWARE COMPATIBILITY PROBLEMS, MALFUNCTIONS OR FAILURES OF ELECTRONIC MONITORING OR CONTROL
DEVICES, TRANSIENT FAILURES OF ELECTRONIC SYSTEMS (HARDWARE AND/OR SOFTWARE), UNANTICIPATED USES OR
MISUSES, OR ERRORS ON THE PART OF THE USER OR APPLICATIONS DESIGNER (ADVERSE FACTORS SUCH AS THESE ARE
HEREAFTER COLLECTIVELY TERMED “SYSTEM FAILURES”). ANY APPLICATION WHERE A SYSTEM FAILURE WOULD
CREATE A RISK OF HARM TO PROPERTY OR PERSONS (INCLUDING THE RISK OF BODILY INJURY AND DEATH) SHOULD
NOT BE RELIANT SOLELY UPON ONE FORM OF ELECTRONIC SYSTEM DUE TO THE RISK OF SYSTEM FAILURE. TO AVOID
DAMAGE, INJURY, OR DEATH, THE USER OR APPLICATION DESIGNER MUST TAKE REASONABLY PRUDENT STEPS TO
PROTECT AGAINST SYSTEM FAILURES, INCLUDING BUT NOT LIMITED TO BACK-UP OR SHUT DOWN MECHANISMS.
BECAUSE EACH END-USER SYSTEM IS CUSTOMIZED AND DIFFERS FROM NATIONAL INSTRUMENTS' TESTING
PLATFORMS AND BECAUSE A USER OR APPLICATION DESIGNER MAY USE NATIONAL INSTRUMENTS PRODUCTS IN
COMBINATION WITH OTHER PRODUCTS IN A MANNER NOT EVALUATED OR CONTEMPLATED BY NATIONAL
INSTRUMENTS, THE USER OR APPLICATION DESIGNER IS ULTIMATELY RESPONSIBLE FOR VERIFYING AND VALIDATING
THE SUITABILITY OF NATIONAL INSTRUMENTS PRODUCTS WHENEVER NATIONAL INSTRUMENTS PRODUCTS ARE
INCORPORATED IN A SYSTEM OR APPLICATION, INCLUDING, WITHOUT LIMITATION, THE APPROPRIATE DESIGN,
PROCESS AND SAFETY LEVEL OF SUCH SYSTEM OR APPLICATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance
FCC/Canada Radio Frequency Interference Compliance
Determining FCC Class
The Federal Communications Commission (FCC) has rules to protect wireless communications from interference. The FCC
places digital electronics into two classes. These classes are known as Class A (for use in industrial-commercial locations only)
or Class B (for use in residential or commercial locations). All National Instruments (NI) products are FCC Class A products.
Depending on where it is operated, this Class A product could be subject to restrictions in the FCC rules. (In Canada, the
Department of Communications (DOC), of Industry Canada, regulates wireless interference in much the same way.) Digital
electronics emit weak signals during normal operation that can affect radio, television, or other wireless products.
All Class A products display a simple warning statement of one paragraph in length regarding interference and undesired
operation. The FCC rules have restrictions regarding the locations where FCC Class A products can be operated.
FCC/DOC Warnings
This equipment generates and uses radio frequency energy and, if not installed and used in strict accordance with the instructions
in this manual and the CE marking Declaration of Conformity*, may cause interference to radio and television reception.
Classification requirements are the same for the Federal Communications Commission (FCC) and the Canadian Department
of Communications (DOC).
Changes or modifications not expressly approved by NI could void the user’s authority to operate the equipment under the
FCC Rules.
Class A
Federal Communications Commission
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user is required to correct the interference
at their own expense.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Compliance to EU Directives
Users in the European Union (EU) should refer to the Declaration of Conformity (DoC) for information* pertaining to the
CE marking. Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance
information. To obtain the DoC for this product, visit ni.com/hardref.nsf, search by model number or product line,
and click the appropriate link in the Certification column.
*
The CE marking Declaration of Conformity contains important supplementary information and instructions for the user or
installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
How to Use the Documentation Set...............................................................................vii
Chapter 1
Benefits of PXI ..............................................................................................................1-1
NI PXI-8184/8185 .........................................................................................................1-1
Modules...........................................................................................................1-2
Chapter 2
Entering BIOS Setup.......................................................................................2-4
LabVIEW RT Setup Menu..............................................................................2-8
Exiting BIOS Setup.........................................................................................2-10
PXI Trigger Connectivity................................................................................2-15
Upgrading RAM ............................................................................................................2-15
Hard Drive Recovery.....................................................................................................2-17
Installing an OS .............................................................................................................2-17
Installing from a CD-ROM .............................................................................2-17
Installing from a Network ...............................................................................2-18
© National Instruments Corporation
v
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 3
VGA................................................................................................................ 3-3
Parallel Port..................................................................................................... 3-6
Universal Serial Bus........................................................................................ 3-8
Trigger............................................................................................................. 3-10
Front Panel Features...................................................................................................... 3-10
Chapter 4
Cables and Connections ................................................................................................ 4-3
Operating System and Software Driver Installation...................................................... 4-4
Basic PXI System Configuration .................................................................... 4-5
Upgrade Information ..................................................................................................... 4-6
PXI Configuration ......................................................................................................... 4-8
Chapter 5
Troubleshooting
Appendix A
Technical Support and Professional Services
Glossary
Index
NI PXI-8184/8185 User Manual
vi
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
This manual contains detailed instructions for installing and configuring
your National Instruments NI PXI-8184/8185 embedded computer kit.
How to Use the Documentation Set
Begin by reading the NI PXI-8184/8185 Installation Guide, a brief
quick-start guide that describes how to install and get started with your
controller.
This manual contains more details about changing the installation or
configuration from the defaults and using the hardware.
Conventions
The following conventions appear in this manual:
»
The » symbol leads you through nested menu items and dialog box options
to a final action. The sequence File»Page Setup»Options directs you to
pull down the File menu, select the Page Setup item, and select Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash.
bold
Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names.
italic
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
© National Instruments Corporation
vii
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
monospace
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames, and extensions.
monospace bold
Bold text in this font denotes the messages and responses that the computer
automatically prints to the screen. This font also emphasizes lines of code
that are different from the other examples.
Related Documentation
The following documents contain information you may find helpful as you
read this manual:
•
PICMG 2.0 R3.0 CompactPCI Specification, PCI Industrial
Computers Manufacturers Group
•
IEEE Standard P1284.1-1997 (C/MM) Standard for Information
Technology for Transport Independent Printer/System Interface
•
•
•
•
PCI Local Bus Specification, Revision 2.2, PCI Special Interest Group
PXI Hardware Specification, Revision 2.1, PXI Systems Alliance
PXI Software Specification, Revision 2.1, PXI Systems Alliance
Serialized IRQ Support for PCI Systems Specification, Revision 6.0,
Compaq Computer et al.
NI PXI-8184/8185 User Manual
viii
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Benefits of PXI
The PXIbus specification defines a compact modular PC platform for
industrial instrumentation. PXI leverages the PCI bus, which is the de facto
standard for today’s desktop computer software and hardware designs. As
a result, PXI users receive all the benefits of PCI within an architecture that
supports mechanical, electrical, and software features tailored to industrial
instrumentation, data acquisition, and automation applications.
Well-suited for industrial applications, PXI leverages from the
CompactPCI specification, which defines a rugged form factor for PCI that
offers superior mechanical integrity and easy installation and removal of
hardware components. PXI products offer higher and more carefully
defined levels of environmental performance required by the vibration,
shock, temperature, and humidity extremes of industrial environments.
PXI adds mandatory environmental testing and active cooling to the
CompactPCI mechanical specification to ease system integration and
ensure multivendor interoperability.
Additionally, PXI meets the more specific needs of instrumentation users
by adding an integrated trigger bus and reference clock for multiple-board
synchronization, a star trigger bus for very precise timing, and local buses
for side-band communication between adjacent peripherals.
NI PXI-8184/8185
Description
The NI PXI-8184/8185 PXI/CompactPCI embedded computer is a
high-performance PXI/CompactPCI-compatible system controller. The
NI PXI-8184/8185 controllers integrate standard I/O features in a single
unit by using state-of-the-art packaging. Combining a NI PXI-8184/8185
embedded controller with a PXI-compatible chassis, such as the PXI-1042,
results in a fully PC-compatible computer in a compact, rugged package.
© National Instruments Corporation
1-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introduction
Modules
The standard I/O on both modules includes video, RS-232 serial port,
parallel port, two USB ports, 10/100 ENET, PS/2 mouse and keyboard
port, Reset button, and PXI Trigger. The modules have the following
configurations:
•
The NI PXI-8185 has a 1.2 GHz processor, all the standard I/O,
a second serial port, and a 30 GB (or larger) hard drive.
•
The NI PXI-8184 has an 850 MHz processor, all the standard I/O,
and a 30 GB (or larger) hard drive.
Functional Overview
the NI PXI-8184/8185 embedded computers.
NI PXI-8184/8185 Functional Description
The NI PXI-8184/8185 is a modular PC in a PXI 3U-size form factor.
Figure 1-1 is a functional block diagram of the NI PXI-8184/8185.
Following the diagram is a description of each logic block shown.
NI PXI-8184/8185 User Manual
1-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introduction
Socket 370
CPU
Chip Set
Graphics
Memory
Controller
Hub
SO-DIMM
SDRAM
PC 100
VGA
Connector
Hub Interface
ATA 100
IDE Interface
PXI
Connector
Chip Set
I/O
Controller
Hub
2 USB
Connectors
PCI Bus
PXI
Triggers
10/100BaseT
Ethernet
Flash
ROM
LPC Bus
SMB to
PXI Trigger
LPT 1
PCI Bus
Super I/O
COM 1
COM 2
Watchdog
SMB
PS/2
Keyboard/
Mouse
Figure 1-1. NI PXI-8184/8185 Block Diagram
© National Instruments Corporation
1-3
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introduction
The NI PXI-8184/8185 consists of the following logic blocks on the
CPU module and the I/O (daughter card) module. The CPU module has
the following logic blocks:
•
The Socket 370 CPU is the socket definition for the Intel Pentium III
processor families.
•
The SO-DIMM block consists of a 64-bit SDRAM socket that can hold
up to 512 MB.
•
•
The Chip Set GMCH connects to the CPU, SDRAM, and video.
The SMB to PXI Trigger provides a routable connection of the
PXI triggers to/from the SMB on the front panel.
•
•
•
•
•
•
The Watchdog Timer block consists of a watchdog timer that can reset
the controller or generate a trigger.
The Chip Set ICH2 connects to the PCI bus USB, IDE, LPC, and
Ethernet ports.
The USB Connector connects the chip set to the Universal Serial Bus
interface.
The PXI Connector connects the NI PXI-8184/8185 to the
PXI/CompactPCI backplane.
The Keyboard/Mouse block contains the PS/2 keyboard and mouse
interface.
The Super I/O block represents the other peripherals supplied by the
NI PXI-8184/8185. The NI PXI-8184/8185 has up to two serial ports
and an ECP/EPP parallel port.
•
The IDE block is dedicated PCI-IDE circuitry providing fast ATA-100
transfers to the internal hard drive. The IDE feature is built into the
chip set.
•
•
The 10/100 Enet connects to either 10 Mbit or 100 Mbit Ethernet
interfaces.
The 2.5 in. hard drive is 30 GB or larger.
National Instruments Software
National Instruments has developed several software kits you can use
with the NI PXI-8184/8185. The software is already installed on your
hard drive.
NI-DAQ has an extensive library of functions that you can call from your
application programming environment. These functions include routines
for analog input (A/D conversion), buffered data acquisition (high-speed
NI PXI-8184/8185 User Manual
1-4
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introduction
A/D conversion), analog output (D/A conversion), waveform generation,
digital I/O, counter/timer operations, SCXI, RTSI, self-calibration,
messaging, and acquiring data to extended memory.
NI-VISA is the National Instruments implementation of the VISA
specification. VISA is a uniform API for communicating and controlling
Serial, GPIB, PXI, VXI, and various other types of instruments. This API
aids in the creation of more portable applications and instrument drivers.
For information on writing your own PXI instrument driver with NI-VISA,
refer to the NI-VISA Getting Started manual and the readme.txtfile in
the NI-VISAdirectory.
You also can use the National Instruments LabVIEW and Measurement
Studio application programs and instrument drivers to ease your
programming task. These standardized programs match the modular
virtual instrument capability of PXI and can reduce your PXI software
development time. These programs feature extensive libraries of GPIB,
Serial, and VXI instrument drivers written to take full advantage of direct
PXI control. LabVIEW and Measurement Studio include all the tools
needed for instrument control, data acquisition, analysis, and presentation.
LabVIEW is an easy-to-use, graphical programming environment you can
use to acquire data from thousands of different instruments, including
IEEE 488.2 devices, VXI devices, serial devices, PLCs, and plug-in data
acquisition boards. After you have acquired raw data, you can convert it
into meaningful results using the powerful data analysis routines in
LabVIEW. LabVIEW also comes with hundreds of instrument drivers,
which dramatically reduce software development time, because you do not
have to spend time programming the low-level control of each instrument.
Measurement Studio allows you to choose from standard environments
such as Microsoft Visual Basic, Visual C++, and Visual Studio .NET to
create your application, using tools specific for each language. With
Measurement Studio, you can write programs quickly and easily and
modify them as your needs change.
LabWindows™/CVI™ is an interactive ANSI C programming
environment designed for building virtual instrument applications.
LabWindows/CVI delivers a drag-and-drop editor for building user
interfaces, a complete ANSI C environment for building your test program
logic, and a collection of automated code generation tools, as well as
utilities for building automated test systems, monitoring applications,
or laboratory experiments.
© National Instruments Corporation
1-5
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Installation and Configuration
This chapter contains information about installing and configuring your
NI PXI-8184/8185 controller.
Installing the NI PXI-8184/8185
This section contains general installation instructions for the
NI PXI-8184/8185. Consult your PXI chassis user manual for specific
instructions and warnings.
1. Plug in your chassis before installing the NI PXI-8184/8185. The
power cord grounds the chassis and protects it from electrical damage
while you install the module. (Make sure the power switch is
turned off.)
Caution To protect both yourself and the chassis from electrical hazards, leave the chassis
powered off until you finish installing the NI PXI-8184/8185 module.
(Slot 1) in the chassis.
3. Touch the metal part of the case to discharge any static electricity that
might be on your clothes or body.
4. Remove the protective plastic covers from the four bracket-retaining
screws as shown in Figure 2-1.
© National Instruments Corporation
2-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
1
1
Protective Screw Cap (4X)
Figure 2-1. Removing Protective Screw Caps
5. Make sure the injector/ejector handle is in its downward position.
Align the NI PXI-8184/8185 with the card guides on the top and
bottom of the system controller slot.
Caution Do not raise the injector/ejector handle as you insert the NI PXI-8184/8185. The
module will not insert properly unless the handle is in its downward position so that it does
not interfere with the injector rail on the chassis.
6. Hold the handle as you slowly slide the module into the chassis until
the handle catches on the injector/ejector rail.
7. Raise the injector/ejector handle until the module firmly seats
into the backplane receptacle connectors. The front panel of the
NI PXI-8184/8185 should be even with the front panel of the chassis.
8. Tighten the four bracket-retaining screws on the top and bottom of the
front panel to secure the NI PXI-8184/8185 to the chassis.
9. Check the installation.
NI PXI-8184/8185 User Manual
2-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
10. Connect the keyboard and mouse to the appropriate connectors. If you
are using a PS/2 keyboard and a PS/2 mouse, use the Y-splitter adapter
(refer to Figure 4-1, Y-Splitter Cable) included with your controller to
connect both to the PS/2 connector.
12. Connect devices to ports as required by your system configuration.
13. Power on the chassis.
14. Verify that the controller boots. If the controller does not boot, refer to
the What if the NI PXI-8184/8185 does not boot? section of Chapter 5,
Troubleshooting.
Figure 2-2 shows an NI PXI-8185 installed in the system controller slot of
a National Instruments PXI-1042 chassis. You can place PXI devices in any
other slot.
1
NI PXI-1042
2
3
1
PXI-1042 Chassis
2
NI PXI-8185 Controller 3 Injector/Ejector Rail
Figure 2-2. NI PXI-8185 Controller Installed in a PXI Chassis
© National Instruments Corporation
2-3
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
How to Remove the Controller from the PXI Chassis
The NI PXI-8184/8185 controllers are designed for easy handling.
To remove the unit from the PXI chassis, complete the following steps:
1. Power off the chassis.
2. Remove the bracket-retaining screws in the front panel.
3. Press the injector/ejector handle down.
4. Slide the unit out of the chassis.
BIOS Setup
You can change the NI PXI-8184/8185 configuration settings in the
BIOS setup. The BIOS is the low-level interface between the hardware
and PC software that configures and tests your hardware when you boot
the system. The BIOS setup program includes menus for configuring
settings and enabling NI PXI-8184/8185 controller features.
Most users do not need to use the BIOS setup program, as the
NI PXI-8184/8185 controller ships with default settings that work
well for most configurations.
Caution Changing BIOS settings may lead to incorrect controller behavior and possibly
an unbootable controller. If this happens, follow the instructions for restoring default
settings in the System CMOS section. In general, do not change a setting unless you are
absolutely certain what it does.
Entering BIOS Setup
To start the BIOS setup utility, complete the following steps:
1. Power on or reboot your NI PXI-8184/8185 controller.
2. When the message Press <DEL> to enter SETUPappears, press
<Delete> or <Del> on the numeric keypad. The message Entering
Setup…appears, and the setup program is loaded after a short delay.
3. When you first enter the BIOS setup program, it displays the Main
menu.
Use the following keys to navigate through the BIOS setup.
different setup menus. If you are in a submenu, these keys have no
effect, and you need to press <Esc> to leave the submenu first. (To use
the arrows on the numeric keypad, you must turn off Num Lock.)
NI PXI-8184/8185 User Manual
2-4
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
•
Up Arrow, Down Arrow—Use these keys to move between the
options within a setup menu. (To use the arrows on the numeric
keypad, you must turn off Num Lock.)
•
•
•
<Enter>—Use this key either to enter a submenu or display all
available settings for a highlighted configuration option.
<Esc>—Use this key to return the parent menu of a submenu. At the
top-level menus, this key serves as a shortcut to the Exit menu.
<+> and <–>—Use these keys to cycle between all available settings
for a selected configuration option.
Main Setup Menu
The most commonly accessed and modified BIOS settings are in the Main
setup menu. The Main setup menu includes the following settings:
•
System Time & Date—This setting controls the time of day, which is
stored in a battery-backed real-time clock. Most operating systems
also include a way to change this setting. Use <+> and <–> in
conjunction with <Enter> to change these values.
•
•
DMI Event Logging—This setting brings up the DMI Event
Logging submenu. (Refer to the DMI Event Logging Submenu
section.)
Require Keyboard to Boot—When Yes, a missing or malfunctioning
keyboard causes the BIOS to halt with an error. When No, the BIOS
allows booting without a keyboard. If you are using a USB keyboard,
you may attach it at any time during the powered up state. If you are
using a PS/2 keyboard, you must power down the controller and then
attach the keyboard. To use this controller in a “headless” mode, you
must set this option to No. The default value is Yes.
•
•
Num Lock—This setting indicates whether you turn on Num Lock at
boot time. The default value is On.
Primary/Secondary Master/Slave—These items display the
IDE/ATA devices detected in the system. Normally, you do not
need to modify these items. However, if an IDE/ATA device is not
autodetected properly, you can specify it manually by pressing
<Enter> on an item.
•
System Information—This setting displays a screen containing
important system information about the NI PXI-8184/8185 controller.
© National Instruments Corporation
2-5
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
DMI Event Logging Submenu
Major errors that occur during the BIOS booting process are stored in
battery-backed memory on the controller, and remain there until you view
and clear them using this submenu. This logging capability allows a system
administrator to detect the historical occurrence of faults on a controller.
This submenu includes the following items:
•
View DMI Event Log—This setting displays a window containing
all logged system errors and the time at which they occurred.
•
Mark Events as Read—This setting prevents any current logged
entries from being displayed again. However, all entries remain in
battery-backed memory, and you can retrieve them using other
DMI software that is beyond the scope of this document.
•
•
Clear All Events—When set to Yes, this setting clears all entries from
the DMI event log on reboot.
Event Logging—This setting controls whether events are logged.
Disabling logging has no impact on system performance. The default
is Enabled.
Advanced Setup Menu
This menu contains BIOS settings that normally do not require
modification. If you have specific problems such as unbootable disks
or resource conflicts, you may need to examine these settings.
Caution Changing settings in this menu may result in an unstable or unbootable controller.
If this happens, follow the procedures outlined in the System CMOS section to restore
BIOS settings to their factory defaults.
The Advanced setup menu includes the following settings:
•
Reset Configuration Data—A portion of the EEPROM on the
controller is designated as the Extended System Configuration Data
region (ESCD). The BIOS and Plug-and-Play operating systems use
this table to store the Last Known Good configuration of system
peripherals. If you experience resource conflicts or peripheral
malfunction, set this setting to Yes to force the BIOS to recreate the
ESCD on the next reboot. This is rarely necessary.
•
•
Integrated Peripherals—Use this setting to bring up the Integrated
Peripherals submenu. (Refer to the Integrated Peripherals Submenu
Local Bus IDE Adapter—The NI PXI-8184/8185 controller has
two integrated IDE/ATA channels (Primary and Secondary), each
NI PXI-8184/8185 User Manual
2-6
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
capable of supporting two ATA devices (Master and Slave). Use this
setting to disable one or more of these integrated channels. You should
modify this setting only if specified in other sections of this manual.
The default is Both.
•
•
Quick Boot Mode—When you enable this option, certain lengthy
BIOS tests that rarely fail are skipped to shorten controller boot time.
The default is Enabled.
Summary Screen—This setting controls the display of the summary
screen shown after BIOS completes its initialization, but before
booting takes place. You can disable this screen in the interest of
shortening controller boot time. The default is Disabled.
•
PXE Network Boot—This setting enables the option for booting from
a network PXE server on the subnet. The default is Disabled.
Integrated Peripherals Submenu
Use this submenu to apply nondefault configurations to the front panel
peripherals of an NI PXI-8184/8185 controller. Normally, you do not need
to modify these settings, as the factory default settings provide the most
compatible and optimal configuration possible.
•
Serial Port A & B—This setting enables or disables COM1 and
COM2. You also can change this setting to Enabled and modify
the base address and Interrupt Request Level (IRQ) of a port. The
NI PXI-8184 does not have a COM2, so Serial Port B is always
disabled. The default is Auto, which places COM1 at 0x3F8 IRQ 4
and COM2 at 0x2F8 IRQ 3.
•
•
•
Parallel Port—Use this setting to enable or disable LPT1. You also
can change this setting to Enabled and modify the base address,
IRQ level, and ISA Direct Memory Access (DMA) channel of the
port. The default is Auto, which places LPT1 at 0x378, IRQ 7, using
ISA DMA Channel 3 if necessary.
Parallel Port Mode—The PC industry has created several different
modes of operation for this port over the years. Usually, the default
setting works for all applications. However, if a parallel port device
specifically requires a nondefault setting, you can change it here.
The default is Bidirectional, for full IEEE 1284 capabilities.
Floppy Drive—You can route the internal signals used for the
3.5 in. floppy drive operation through the pins on the parallel port
connector. Use this setting to operate the NI PXI-8184/8185 controller
with a specialized external floppy drive. Normally, using a Universal
Serial Bus (USB) floppy drive is preferable to this option, which
requires a specially designed drive and cable. (Refer to the Parallel
© National Instruments Corporation
2-7
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
Port section of Chapter 3, I/O Information, for pinout information.)
Setting this option to Parallel Port disables normal LPT1
functionality. The default is Disabled.
•
Legacy USB Support—Use this setting to use a USB keyboard and
mouse as if they were standard PS/2-style peripherals. You must enable
this setting to use these devices in operating systems with no USB
support and to boot from a USB floppy or CD-ROM. The BIOS setup
screen always works with USB keyboards regardless of this setting.
Certain real-time applications may require you to disable this setting
to reduce loop time jitter. The default is Enabled.
PXI Setup Menu
Use this menu to control and route certain signals on the PXI backplane.
Normally, you do not need to modify these settings. However, other
sections of this manual may indicate that modifications are necessary
and may lead to unpredictable behavior.
•
INTP Routing—You can route INTP to ISA IRQ 14, for use by a
PXI device functioning as a Primary IDE Controller. The default
setting is Not Routed.
•
INTS Routing—You can route INTS to ISA IRQ 15, for use by a
PXI device functioning as a Secondary IDE Controller. You also can
route it to the controller’s 21-frame serialized IRQ input, for use by
certain PXI carrier cards. The default setting is Not Routed.
Note If INTS or INTP is routed to an ISA IRQ, you must disable one or both channels of
the integrated IDE/ATA controller for correct operation of this routing.
LabVIEW RT Setup Menu
Note This menu is visible only if the controller supports LabVIEW RT.
Use this menu to configure boot options for LabVIEW RT if it is installed
on the controller. If you are not using LabVIEW RT, you should leave these
settings as default.
Note These settings override the behavior of the switches on SW1. Refer to the LabVIEW
RT Configuration Switches section for more information. To use the settings from the
NI PXI-8184/8185 User Manual
2-8
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
•
•
•
Boot Configuration—This setting selects whether the controller
should boot LabVIEW RT, LabVIEW RT Safe Mode, or an installed
OS such as Windows XP. The default is Use Hardware Switch.
Disable Startup VI—If the controller becomes inaccessible because
of a startup VI, this switch can prevent VIs from automatically running
at startup. The default is Use Hardware Switch.
Reset IP Address—If the controller is deployed to a different subnet
from which it was originally configured, or if the current IP address
is invalid, use this switch to reset the IP address to 0.0.0.0 during
LabVIEW RT startup. The default is Use Hardware Switch.
Security Setup Menu
Use this menu to apply system-level passwords to the NI PXI-8184/8185
controller. With these passwords, you can restrict access to the BIOS setup
program, floppy drives, and operating systems installed on bootable
devices. If you forget any password, you can restore the CMOS contents to
the factory default as described in the System CMOS section.
Note In most chassis configurations, an unauthorized user has easy access to the jumper
that resets the CMOS contents to the factory default. For a secure setup of this controller,
National Instruments recommends further provisions that are beyond the scope of this
document.
The Security setup menu includes the following settings:
•
Set Supervisor Password—This setting sets the password that
governs supervisor-level access to the BIOS setup screen and booting.
The default is no password.
•
Set User Password—This setting sets the password that governs
user-level access to the BIOS setup screen and booting. If you enter
BIOS setup using the user password, the only BIOS setting you can
modify is the user password. The default is no password.
•
•
Password on Boot—This setting controls whether the controller
requires a supervisor or user password to boot an operating system. If
you enter the supervisor password on boot, you have supervisor-level
diskette access. If you enter the user password on boot, you have
user-level diskette access.
Write Protect Boot Sector—When set to Yes, this setting prevents
modification of a hard disk boot sector through INT 13h services,
which may help prevent certain computer viruses from infecting the
controller. This setting does not prevent boot sector modification
© National Instruments Corporation
2-9
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
by 32-bit operating system drivers that access the hard disk directly.
The default is No.
Note To disable a current password, leave the new password field blank by pressing
<Enter> on the field.
Boot Setup Menu
This screen displays the boot order of devices associated with the
controller. The BIOS proceeds down this list in search of a bootable device.
If the BIOS fails to find any bootable device, the message Operating
System Not Foundis displayed, and the system halts.
•
Removable Devices—The boot list includes floppy drives, ZIP drives,
and some USB-based devices.
•
Hard Drive—The boot list includes all IDE/ATA and USB hard disks
detected on the system. Press <Enter> on this entry to expand it to
select the boot priority of individual IDE/ATA hard drives.
•
CD-ROM Drive—The boot list includes all classes of CD-ROM
drive, including USB drives.
Note If an SCSI host adapter exists in the system, this menu has an additional entry for
SCSI devices.
Note If PXE Network Boot is enabled, this menu has an additional entry for the Ethernet
interface.
Exiting BIOS Setup
The Exit setup menu includes all available options for exiting, saving, and
loading the BIOS default configuration. As an alternative to this screen,
press <F9> to load BIOS default settings and <F10> to save changes and
exit setup.
The Exit setup menu includes the following settings:
•
•
•
Exit Saving Changes—Any changes made to BIOS settings are stored
in the battery-backed System CMOS. The setup program then exits
and reboots the controller.
Exit Discarding Changes—Any changes made to BIOS settings
during this session of the BIOS setup program are discarded. The setup
program then exits and boots the controller without rebooting first.
Load Setup Defaults—This setting restores all BIOS settings to the
factory default. This is useful if the controller exhibits unpredictable
NI PXI-8184/8185 User Manual
2-10
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
behavior due to an incorrect or inappropriate BIOS setting. Notice
that any nondefault settings such as boot order, passwords, and
keyboardless operation are restored to their factory defaults. This
may produce undesirable behavior, and in heavily customized cases,
may cause the controller to malfunction or fail to boot.
•
•
Discard Changes—Any changes made to BIOS settings during this
session of the BIOS setup program are discarded. Unlike Exit
Discarding Changes, however, the BIOS setup continues to be active.
Save Changes—Changes made to BIOS settings during this session
are committed to battery-backed System CMOS. The setup program
remains active, allowing further changes.
System CMOS
The NI PXI-8184/8185 contains a backed-up memory used to store
BIOS configuration information.
Complete the following steps to clear the CMOS contents.
1. Power off the chassis.
2. Remove the controller from the chassis.
3. Move the jumper on J1 from pins 1-2 to pins 2-3, as shown in
Figure 2-3.
4. Wait one second. Move the jumper back to pins 1-2.
5. Reinstall the controller in the chassis.
Caution Do not leave the jumper on pins 2-3. Doing so decreases battery life.
© National Instruments Corporation
2-11
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
3
2
1
1
Normal Operation (Default)
2
Clear CMOS Contents
3
Pin 1
Figure 2-3. Clearing the CMOS Contents (NI PXI-8185 Shown)
Note For clarity, the battery is not shown in Figure 2-3.
LabVIEW RT Configuration Switches
Note These switches are functional only if the controller supports LabVIEW RT.
Use the LabVIEW RT configuration switches to configure LabVIEW RT
if it is installed on the controller. If you are not using LabVIEW RT, these
switches should remain in the OFF position. The controller reads these
switches only after a system reset. You must reboot the controller for any
changes to take place.
NI PXI-8184/8185 User Manual
2-12
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
The NI PXI-8184/8185 controller includes the following LabVIEW RT
configuration switches:
•
Switch 1—Boot LabVIEW RT: Set this switch to ON to boot
LabVIEW RT.
•
Switch 2—Boot Safe Mode: Set this switch to ON to boot
LabVIEW RT into safe mode to reconfigure TCP/IP settings and
to download or update software from a host computer. This switch
overrides the behavior of Switch 1. Booting the controller into safe
mode does not start the embedded LabVIEW RT engine. After
changing the settings or software, reboot the controller with this switch
OFF to resume normal operation.
•
•
Switch 3—Disable Startup VI: Set this switch to ON to prevent
VIs from automatically running at startup if the controller becomes
inaccessible because of a startup VI.
Switch 4—Reset IP Address: Set this switch to ON to reset the
IP address to 0.0.0.0 and other TCP/IP settings to their defaults.
Use this switch if moving the controller to a different subnet or if
the current TCP/IP settings are invalid.
Figure 2-4 shows the location of the LabVIEW RT configuration switches.
The switches are shown in the OFF position.
© National Instruments Corporation
2-13
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
1
2
3
4
OFF
1
ON
2
3
4
1
2
Switch 1—Boot LabVIEW RT
Switch 2—Boot Safe Mode
3
4
Switch 3—Disable Startup VI
Switch 4—Reset IP Address
Figure 2-4. LabVIEW RT Configuration Switches
Drivers and Software
Files and Directories Installed on Your Hard Drive
Your hard drive includes a directory called imagesin its root that
contains software and soft copies of manuals for the peripherals. The
directory structure under the imagesdirectory is logically organized
into several levels.
In the imagesdirectory, you will find a manualsdirectory,
an osdirectory, and directories for each computer peripheral.
reference manuals, and National Instruments software manuals, all in
Adobe Acrobat format. To access any manual, change your directory to
NI PXI-8184/8185 User Manual
2-14
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
c:\images\pxi-8180\manualsand list the contents of that directory.
You will see several files, one corresponding to each peripheral.
The osdirectory contains a subdirectory corresponding to the operating
system installed on your computer.
The rest of the directories correspond to each peripheral in your system.
Within each of these directories are the drivers for the peripherals. These
files and directories are copied exactly from the manufacturer distribution
disks, so the naming conventions vary from peripheral to peripheral.
Because the naming conventions may not be completely straightforward,
National Instruments provides a text file named drivers.txtin the
c:\images\pxi-8180directory. The drivers.txtfile explains how
to install support for each peripheral. You may want to print this file for
reference when you install your peripheral device drivers.
PXI Features
PXI Trigger Connectivity
The SMB connector on the NI PXI-8184/8185 front panel can connect
to or from any PXI backplane trigger line through software. A trigger
allocation process is needed to prevent two resources from connecting
to the same trigger line, resulting in the trigger being double-driven and
possibly damaging the hardware. At the time of this manual’s publication,
this software is not yet available; however, an interim trigger routing
software utility is available from National Instruments. Contact National
Instruments or refer to KnowledgeBase 2RCBPFWD at ni.com/support
for more information.
Upgrading RAM
You can change the amount of installed RAM on the NI PXI-8184/8185 by
upgrading the SO-DIMM.
To upgrade the RAM, remove the NI PXI-8184/8185 from the PXI chassis.
Remove the old SO-DIMM module and install the new SO-DIMM in the
socket as shown in Figure 2-5.
© National Instruments Corporation
2-15
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
National Instruments offers the following types of SO-DIMMs for use with
the NI PXI-8184/8185 controller.
•
•
•
128 MB, 16 MB × 64, 7.5 ns, 1.05 in. max
256 MB, 32 MB × 64, 7.5 ns, 1.05 in. max
512 MB, 64 MB × 64, 7.5 ns, 1.05 in. max
Note National Instruments has tested and verified that the SO-DIMMs we sell work with
the NI PXI-8184/8185. We recommend you purchase your SO-DIMM modules from
National Instruments. Other off-the-shelf SO-DIMM modules are not guaranteed to work
properly.
1
2
1
SO-DIMM Module
2
SO-DIMM Socket
Figure 2-5. Installing a SO-DIMM in an NI PXI-8184/8185 Controller
(NI PXI-8185 Shown)
NI PXI-8184/8185 User Manual
2-16
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
Hard Drive Recovery
NI PXI-8184/8185 controllers include Phoenix Technologies Ltd.
Firstware tools, either Recover or Vault, or both. These tools allow you
to recover the original factory condition of the hard disk from a small
protected area of your hard drive. This protected area contains an image of
the hard disk provided to you at the time of shipment. Should you need to
restore your software to its original condition, you can access that image
by pressing a hot key during the initial boot process. For more information
regarding these tools, refer to the documentation on your hard drive in the
c:\Images\Firstwaredirectory.
Note Your system hot key is <Alt>. To access the Phoenix Firstware Recover tool, press
and hold <Alt> when video first appears during the boot process.
If you need to recover your factory-installed operating system from a CD,
you can use the included OS installation CD with an external CD-ROM
drive such as a USB CD-ROM drive. Boot the PXI controller using the
OS installation CD to recover the OS. You also may need to reinstall other
software after using the CD to recover the OS.
Note Recovering the OS using Firstware or the recovery CD erases the contents of your
hard disk. Back up any files you want to keep.
Installing an OS
NI PXI-8184/8185 controllers include a preinstalled OS. In some cases,
you may want to reinstall the OS or install a different OS. When doing so,
consider the following guidelines.
Installing from a CD-ROM
The NI PXI-8184/8185 supports the installation of Windows XP from a
USB CD-ROM. However, many other operating systems do not support
installation from a USB CD-ROM. For example, Windows 2000 aborts
during the install process because it does not have drivers for the CD-ROM
device.
With DOS drivers, you can install Windows 9x operating systems.
However, only a few USB CD-ROM drives have DOS drivers.
As an alternative to a USB CD-ROM drive, you can use an external SCSI
CD-ROM with a PXI-SCSI adapter.
© National Instruments Corporation
2-17
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Installation and Configuration
Installing from a Network
Complete the following steps to install an OS from a network.
1. Create a network bootdisk. (Refer to the readme.txtfile in the
netbootfolder on your OS installation CD.)
2. Use another PC on the network with a CD-ROM drive. Share the drive
and load the OS installation CD.
3. Boot your NI PXI-8184/8185 using the network boot disk.
4. Run the net utility from the a:drive. Map the shared CD-ROM
(for example, drive z:).
5. Run winnt.exefrom the \os\i386directory.
Note To launch the installation in unattended mode, type
z:\os\i386\winnt.exe /u:z:\os\pxi8180.txt /s:z:\os\i386
Note For additional assistance with installing or changing an operating system, refer to
KnowledgeBase 2ZKC02OK at ni.com/support.
NI PXI-8184/8185 User Manual
2-18
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
3
I/O Information
Front Panel Connectors
Table 3-1 lists various peripherals and their corresponding
NI PXI-8184/8185 external connectors, bus interfaces, and functions.
Table 3-1. NI PXI-8184/8185 Peripherals Overview
NI PXI-8184/
External
Connector
PXI-8185
Models
Peripheral
Video
Function
15-pin D-SUB
(standard VGA)
Integrated with Dynamic Video
Memory
Both
Serial
Serial
COM1 RS-232
Serial Port
(9-pin D-SUB)
16550 serial port
Both
COM2 RS-232
Serial Port
16550 serial port
NI PXI-8185
(9-pin D-SUB)
10/100 Ethernet
Parallel
Ethernet
Ethernet network connection
Extended capabilities
Both
Both
Parallel Port
(IEEE 1284)
USB
4-pin Series A
receptacle
Universal Serial Bus
(two ports on all models)
Both
Both
Keyboard/mouse
PXI trigger
PS/2
PS/2-style keyboard and mouse
(mouse requires PS/2 Y splitter)
Trigger
Routing PXI triggers to or from the Both
backplane trigger bus
similar locations on the NI PXI-8184.
© National Instruments Corporation
3-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Front Panel
Figure 3-1 shows the front panel layout and dimensions of the
NI PXI-8184/8185. Dimensions are in inches [millimeters].
0.00 [0]
0.69 [17.5]
1.25 [31.8]
1.31 [33.3]
1.50 [38.1]
1.84 [46.7]
2.50 [63.5]
3.00 [76.2]
3.47 [88.1]
Figure 3-1. NI PXI-8184/8185 Front Panel Layout and Dimensions
NI PXI-8184/8185 User Manual
3-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
VGA
Figure 3-2 shows the location and pinouts for the VGA connector on
the NI PXI-8184/8185. Table 3-2 lists and describes the VGA connector
signals.
AMP manufactures a mating connector with part numbers 748364-1
(housing) and 748333-2 (pin contact).
11 6
1
5
VGA
15 10
Figure 3-2. VGA Connector Location and Pinout
Table 3-2. VGA Connector Signals
Pin
1
Signal Name
Signal Description
R
Red
2
G
Green
3
B
Blue
4
NC
Not Connected
Ground
Ground
Ground
Ground
5 V
5
GND
GND
GND
GND
+5V
6
7
8
9
© National Instruments Corporation
3-3
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Table 3-2. VGA Connector Signals (Continued)
Signal Name Signal Description
GND
Pin
10
11
12
13
14
15
Ground
NC
Not Connected
Serial Data
SD
HSync
VSync
SC
Horizontal Sync
Vertical Sync
Serial Clock
COM1 and COM2
Figure 3-3 shows the location and pinouts for the COM1 and COM2
connectors on the NI PXI-8184/8185. Table 3-3 lists and describes the
COM1 and COM2 connector signal.
AMP manufactures a serial port mating connector, part number 745491-5.
5
1
5
1
9
6
9
6
COM2
COM1
Figure 3-3. COM1 and COM2 Connector Location and Pinout
NI PXI-8184/8185 User Manual
3-4
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Table 3-3. COM1 and COM2 Connector Signals
Pin
1
Signal Name
DCD*
Signal Description
Data Carrier Detect
Receive Data
2
RXD*
TXD*
DTR*
GND
DSR*
RTS*
CTS*
RI*
3
Transmit Data
Data Terminal Ready
Ground
4
5
6
Data Set Ready
Ready to Send
Clear to Send
Ring Indicator
7
8
9
Ethernet
Figure 3-4 shows the location and pinouts for the Ethernet connector on the
NI PXI-8184/8185. Table 3-4 lists and describes the Ethernet connector
signals.
AMP manufactures a mating connector, part number 554739-1.
1
Ethernet
8
Figure 3-4. Ethernet Connector Location and Pinout
© National Instruments Corporation
3-5
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Table 3-4. Ethernet Connector Signals
Pin
1
Signal Description
Differential Transmit
2
Differential Transmit
3
Differential Receive
4
NC
5
NC
6
Differential Receive
7
NC
NC
8
Parallel Port
Figure 3-5 shows the location and pinouts for the IEEE 1284 (parallel)
connector on the NI PXI-8184/8185. Table 3-5 lists and describes the
IEEE 1284 connector signals.
Parallel port adapter cables are available from National Instruments,
part number 777169-01.
1
19
Parallel Port
36
18
Figure 3-5. Parallel Port Connector Location and Pinout
NI PXI-8184/8185 User Manual
3-6
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Table 3-5. Parallel Port Connector Signals
Floppy Configuration1
Signal Name Signal Description
MTR1*
Default Configuration (LPT)
Signal Name Signal Description
BUSY*
Pin
1
Device Busy
Select Input
Acknowledge
Fault
Motor on Disk 1
Step Pulse
2
SLCTIN*
ACK*
FAULT*
ERROR
PD0
Step*
3
DS1*
Drive Select 1
Write Disk Data
Head Select
Index Pulse Input
Track 0
4
WDATA*
HDSEL*
Index*
5
Error
6
Data Bit 0
Data Bit 1
Data Bit 2
Data Bit 3
Data Bit 4
Data Bit 5
Data Bit 6
Data Bit 7
Initialize Printer
Strobe
7
PD1
TRK0*
WRTPRT*
RDATA*
DSKCHG*
Not Used
MTR0*
Not Used
DIR*
8
PD 2
Write Protected
Read Disk Data
Disk Change
—
9
PD3
10
11
12
13
14
15
16
17
18
19–35
36
PD4
PD5
PD6
Motor on Disk 0
—
PD7
INIT*
STROBE*
SLCT
AUTOFD
+5V
Step Direction
Drive Select 0
Write Gate
DS0*
Select
WGATE*
+5V
+5 V
Density Select
+5 V
GND
Ground
GND
Ground
NC
Not Connected
NC
Not Connected
1 Refer to the BIOS Setup section of Chapter 2, Installation and Configuration.
© National Instruments Corporation
3-7
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Universal Serial Bus
Figure 3-6 shows the location and pinouts for the Universal Serial Bus
(USB) connector on the NI PXI-8184/8185. Table 3-6 lists and describes
the USB connector signals.
AMP manufactures a USB mating connector, part number 787633.
4
USB
1
Figure 3-6. USB Connector Location and Pinout
Table 3-6. USB Connector Signals
Pin
1
Signal Name
VCC
Signal Description
Cable Power (+5 V)
2
–Data
+Data
GND
USB Data–
USB Data+
Ground
3
4
NI PXI-8184/8185 User Manual
3-8
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
PS/2
Figure 3-7 shows the location and pinouts for the PS/2 connector on the
NI PXI-8184/8185. Table 3-7 lists and describes the PS/2 connector
signals.
To connect both a PS/2 keyboard and PS/2 mouse to the NI PXI-8184/8185,
use the Y-splitter adapter cable included with your controller (refer to
Figure 4-1, Y-Splitter Cable).
Replacement Y-splitter cables are available from National Instruments,
part number 778713-01.
3
4
5
1
2
PS/2
6
Figure 3-7. PS/2 Connector Location and Pinout
Table 3-7. PS/2 Connector Signals
Y-Splitter
Y-Splitter
Mouse
Pin
1
Signal Name
DATA
NC
Signal Description
Data Keyboard
Data Mouse
Ground
Keyboard
Data Keyboard
Data Mouse
NC
2
NC
3
GND
GND
GND
4
+5V
+5 V
+ 5
+ 5
5
CLK
Clock Keyboard
Clock Mouse
Clock Keyboard
NC
Clock Mouse
NC
6
NC
© National Instruments Corporation
3-9
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Trigger
The TRG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-8 shows the TRG connector location on the NI PXI-8184/8185.
Table 3-8 lists and describes the trigger connector signals.
2
1
Figure 3-8. TRG Connector Location and Pinout
Table 3-8. TRG Connector Signals
Pin
1
Signal Name
TRIG
GND
Signal Description
Trigger
Ground
2 (Shield)
Front Panel Features
The NI PXI-8184/8185 have the following front-panel features:
•
•
A system reset pushbutton (hold the button for at least two seconds to
generate a reset to the controller).
Two front-panel LEDs that show PC status.
no longer asserted.
–
The DRIVE LED indicates when an access to the internal hard
disk is occurring.
NI PXI-8184/8185 User Manual
3-10
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
I/O Information
Data Storage
The NI PXI-8184/8185 have the following data storage features:
•
Internal IDE hard drive
–
–
2.5 in. notebook hard drive
Supports up to ATA-5 (UDMA 100)
•
USB storage support—USB CD-ROM, floppy drive, or mass storage
device
© National Instruments Corporation
3-11
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Common Configuration
Questions
This chapter answers common configuration questions you may have when
using the NI PXI-8184/8185 embedded controller.
General Questions
What do the LEDs on the NI PXI-8184/8185 front panel mean?
The green LED indicates the power supplies to/on the NI PXI-8184/8185
are within spec. The supplies monitored are 3.3 V, 5 V, +12 V, and the
internally regulated processor core voltage. The hard drive LED lights
when there is hard drive activity on the NI PXI-8184/8185.
How do I check the configuration of the memory, hard drive,
time/date, and so on?
You can view these parameters in the BIOS setup. To enter the BIOS setup,
reboot the NI PXI-8184/8185 and press <Delete> during the memory tests.
Refer to the Entering BIOS Setup section of Chapter 2, Installation and
Configuration, for more information.
Can I use the internal IDE drive and an external SCSI hard drive at
the same time?
Yes.
© National Instruments Corporation
4-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Common Configuration Questions
Boot Options
What devices can I boot from?
The NI PXI-8184/8185 can boot from the following devices:
•
•
The internal IDE hard drive
An external SCSI hard drive or CD-ROM if an SCSI adapter, such as
the PXI-8214, is used
•
•
An external USB mass storage device such as a USB hard drive or
CD-ROM
An external USB floppy drive
Note There are some limitations when booting from a USB device. Windows XP
can be installed from a USB CD-ROM, but earlier versions of Windows cannot.
The NI PXI-8184/8185 BIOS configures the USB devices so that they will work
in a DOS environment.
How do I configure the controller to boot from these devices?
There are two methods:
•
Enter Setup and select the Boot menu. You will see a list of all bootable
devices, ordered by device type. You can set the boot order pressing
<+> and <–>. Set the order by device type and set the order for the
devices listed within the device type.
•
To boot from a different device without permanently changing the boot
order, press <Esc> during POST. After the BIOS completes the POST
and just before the controller boots the OS, the Boot menu is displayed.
You can select the device type you want to boot from.
Note Two devices cannot share the same IDE channel, and doing so may damage the
hardware. If you configure the PC Card ATA drive for the primary channel, you must
physically remove the internal IDE drive.
NI PXI-8184/8185 User Manual
4-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Common Configuration Questions
Cables and Connections
How do I plug both a PS/2 mouse and PS/2 keyboard into the
controller?
The NI PXI-8184/8185 has a combined PS/2 mouse and PS/2 keyboard
connector, so you need to use the PS/2 Y-splitter cable shipped with the
NI PXI-8184/8185, shown in Figure 4-1, to connect both a PS/2 mouse and
PS/2 keyboard.
Figure 4-1. Y-Splitter Cable
How do I get a replacement Y-splitter cable?
Y-splitter cables, part number 778713-01, are available through the online
catalog at ni.com/products.
What if I don’t have a Y-splitter cable? Can I still use a mouse and
keyboard?
If you do not have a Y-splitter cable, plug a PS/2 keyboard into the
PS/2 combo connector. However, you cannot use a PS/2 mouse without
the Y-splitter, so use a serial or USB mouse.
How do I connect a standard 25-pin LPT cable to the
NI PXI-8184/8185?
The NI PXI-8184/8185 uses a type C LPT connector. Most parallel port
devices use a type A connector. To use a device with a standard type A LPT
connector, you need to use a type C-to-type A LPT adapter. Parallel port
adapter cables, part number 777169-01, are available through the online
catalog at ni.com/products.
© National Instruments Corporation
4-3
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Common Configuration Questions
Operating System and Software Driver Installation
How do I install or reinstall the video driver?
Refer to the Drivers.txtfile on the hard drive or recovery CD-ROM.
How do I install or reinstall the Ethernet driver?
Refer to the Drivers.txtfile on the hard drive or recovery CD-ROM.
How do I install software from a CD?
The compact size of the NI PXI-8184/8185 does not allow for an integrated
CD-ROM drive. If you are using Windows XP, you have the following
options:
•
USB CD-ROM—Windows XP supports installing from a USB
CD-ROM using a bootable installation CD.
•
SCSI, LPT, or PC Card-based CD-ROM—Other types of CD-ROM
drives are available. Check with the vendor to make sure Windows XP
supports the drive.
•
Mapped network drive—You can use the Ethernet to connect to
another computer. If you share the CD-ROM drive on the other
computer, you can map the shared CD-ROM drive to a drive letter
on the NI PXI-8184/8185.
Chassis Configuration
How do I set up the NI PXI-8184/8185 to work with my chassis?
Configuration of the PXI system is handled through Measurement &
Automation Explorer (MAX), included with the software pre-installed on
your controller. MAX creates the pxisys.inifile, which defines the
layout and parameters of your PXI system.
NI PXI-8184/8185 User Manual
4-4
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Common Configuration Questions
The configuration steps for single or multiple-chassis systems are the same.
Figure 4-2. Multichassis Configuration in MAX
Basic PXI System Configuration
1. Launch MAX.
2. In the Configuration tree, click the Devices and Interfaces branch to
expand it.
3. If the PXI system controller has not yet been configured, it is labeled
PXI System (Unidentified). Right-click this entry to display the
pop-up menu, then select the appropriate controller model from the
Identify As submenu.
4. Click the PXI System controller. The chassis (or multiple chassis, in a
multichassis configuration) is listed below it. Identify each chassis by
right-clicking its entry, then selecting the appropriate chassis model
through the Identify As submenu. Further expanding the PXI System
branch shows all devices in the system that can be recognized by
© National Instruments Corporation
4-5
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Common Configuration Questions
NI-VISA. When your controller and all your chassis are identified, the
required pxisys.inifile is complete.
The PXI specification allows many combinations of PXI chassis and
system modules. To assist system integrators, the manufacturers of
PXI chassis and system modules must document the capabilities of their
products. The minimum documentation requirements are contained in
.inifiles, which consist of ASCII text. System integrators, configuration
utilities, and device drivers can use these .inifiles.
The capability documentation for the chassis is contained in a
chassis.inifile provided by the chassis manufacturer. The information
in this file is combined with information about the system controller to
create a single system initialization file called pxisys.ini(PXI System
Initialization). The NI PXI-8184/8185 uses MAX to generate the
pxisys.inifile from the chassis.inifile.
Device drivers and other utility software read the pxisys.inifile to
obtain system information. For detailed information regarding initialization
Upgrade Information
How do I upgrade system memory?
You can change the amount of installed RAM on the NI PXI-8184/8185 by
upgrading the SO-DIMM.
To upgrade the RAM, remove the NI PXI-8184/8185 from the PXI chassis.
Remove the old SO-DIMM module and install the new SO-DIMM in the
socket as shown in Figure 4-3.
National Instruments offers the following types of SO-DIMMs for use with
the NI PXI-8184/8185 controller.
•
•
•
128 MB, 16 MB × 64, 7.5 ns, 1.05 in. max
256 MB, 32 MB × 64, 7.5 ns, 1.05 in. max
512 MB, 64 MB × 64, 7.5 ns, 1.05 in. max
Note National Instruments has tested and verified that the SO-DIMMs we sell work with
the NI PXI-8184/8185. We recommend you purchase your SO-DIMM modules from
National Instruments. Other off-the-shelf SO-DIMM modules are not guaranteed to work
properly.
NI PXI-8184/8185 User Manual
4-6
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Common Configuration Questions
1
2
1
SO-DIMM Module
2
SO-DIMM Socket
Figure 4-3. Installing a SO-DIMM in an NI PXI-8184/8185 Controller
(NI PXI-8185 Shown)
How do I flash a new BIOS?
You need to download the new BIOS from ni.com/support/
pxisupp.htm. To download the new BIOS, follow the instructions
on the Web site.
Where do I get the latest software drivers?
You can download the latest drivers from ni.com/support/
pxisupp.htm.
© National Instruments Corporation
4-7
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Common Configuration Questions
My NI PXI-8184/8185 does not have an internal floppy drive. Is there
a way to use an external drive?
Yes. The NI PXI-8184/8185 controllers support and can boot from
USB floppy drives. A USB floppy drive will not work with
Windows NT 4.0, but will work with Windows XP. Refer to the Boot
A USB floppy drive is available from National Instruments, part number
778492-02.
The LPT port on the NI PXI-8184/8185 also can be configured through the
BIOS setup for floppy signals instead of LPT signals. Refer to Chapter 3,
PXI Configuration
How do I use the SMB trigger on the front panel?
For details, refer to the PXI Features section of Chapter 2, Installation and
Configuration.
Why doesn’t the NI PXI-8184/8185 work with the PXI-8220?
A serialized IRQ conflict with the PXI-8220 and the NI PXI-8184/8185
prevents PC cards using ISA interrupts from working with the
NI PXI-8184/8185 controllers. The PXI-8221 is designed to work with
the NI PXI-8184/8185 and should be used instead.
NI PXI-8184/8185 User Manual
4-8
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Troubleshooting
This chapter answers common troubleshooting questions you may have
when using the NI PXI-8184/8185 embedded computer.
What if the NI PXI-8184/8185 does not boot?
Several problems can cause a controller not to boot. Here are some things
to look for and possible solutions.
Things to Notice
•
Which LEDs come on? The Power OK LED should stay lit.
The Drive LED should blink during boot as the disk is accessed.
•
What appears on the display? Does it hang at some particular point
(BIOS, Operating System, and so on)? If nothing appears on the
screen, try a different monitor. Does your monitor work with a
different PC? If it hangs, note the last screen output that you saw for
reference when consulting National Instruments technical support.
•
What has changed about the system? Did you recently move the
system? Was there electrical storm activity? Did you recently add
a new module, memory chip, or piece of software?
Things to Try
•
•
Make sure the chassis is plugged in to a working power source.
Check any fuses or circuit breakers in the chassis or other power
supply (possibly a UPS).
•
•
•
•
•
•
Make sure the controller module is firmly seated in the chassis.
Remove all other modules from the chassis.
Try the controller in a different chassis.
Try a similar controller in this same chassis.
Recover the hard drive on the controller.
Installation and Configuration.)
© National Instruments Corporation
5-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Troubleshooting
My controller boots fine until I get to Windows, at which point I cannot
read the screen. This may include garbled output, white screen, black
screen, or an out of sync message from the monitor.
This problem usually results from having the video card output set past the
limits of the monitor. You will need to boot Windows in Safe Mode. To do
this, reboot the controller. As Windows begins to boot, hold down <F8>.
You should now be able to reset the video driver to lower settings. Try
setting the resolution to 640 × 480 and the refresh rate to 60 Hz. Once you
reboot, you can raise these values again, using the test option in Windows.
These settings are accessible through the Advanced tab of the Display item
in the Control Panel. Alternately, you can try a different monitor,
preferably a newer and larger one.
My system boots fine as long as a particular module is not in my
chassis.
The most common cause of this is a damaged module. Try the module in a
different chassis or with a different controller. Also, remove any external
cables or terminal blocks connected to the system. If the module does not
work in these cases, it is likely damaged. Contact the module manufacturer
for further troubleshooting.
Refer to the KnowledgeBase or product manuals section of ni.comfor
more information specific to the chassis and controller with which you are
having difficulties.
My CMOS is corrupted. How do I set it back to default?
1. Enter the BIOS setup program as described in the Entering BIOS Setup
section of Chapter 2, Installation and Configuration.
2. Press <F9> to load BIOS defaults.
3. Answer Y (Yes) to the verification prompt.
4. Select Save and Exit Setup.
As an alternative method, follow the steps listed in the System CMOS
section of Chapter 2, Installation and Configuration, to clear the CMOS.
NI PXI-8184/8185 User Manual
5-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Specifications
This appendix lists the electrical, mechanical, and environmental
specifications of the NI PXI-8184/8185 embedded computers.
NI PXI-8185
Electrical
Current (A)
Voltage (V)
+3.3
Typical
3.0 A
3.5 A
0.01 A
0 A
Maximum
4 A
+5
5 A
+12
0.04 A
0 A
–12
Physical
Board dimensions................................... PXI 3U-size module
8.1 × 13 × 21.6 cm
(3.2 × 5.1 × 8.5 in.)
Slot requirements ................................... One system slot plus three
controller expansion slots
Compatibility ......................................... Fully compatible with PXI
specification
MTBF..................................................... 180,000 h
Weight.................................................... 1.02 Kg (2.26 lb) typical
© National Instruments Corporation
A-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Operating Environment
Ambient temperature range
Chassis
PXI-1000B
PXI-1002
PXI-1006
PXI-1010
PXI-1011
PXI-1042
PXI-1045
NI PXI-8185
5–50 °C
5–40 °C
5–50 °C
5–35 °C
5–50 °C
5–50 °C
5–55 °C
(Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2.)
Relative humidity range..........................10% to 90%, noncondensing
(Tested in accordance with
IEC-60068-2-56.)
Altitude ...................................................2,000 m (at 25 °C ambient
temperature)
Pollution Degree.....................................2
For indoor or enclosed area use only.
Caution Clean the PXI-8185 with a soft nonmetallic brush. Make sure that the device is
completely dry and free from contaminants before returning it to service.
Storage Environment
Ambient temperature range ....................–20 to 65 °C (Tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2.)
Relative humidity range..........................5% to 95% noncondensing
(Tested in accordance with
IEC-60068-2-56.)
NI PXI-8184/8185 User Manual
A-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Shock and Vibration
Operational shock .................................. 30 g peak, half-sine, 11 ms pulse
(Tested in accordance with
IEC-60068-2-27. Test profile
developed in accordance with
MIL-PRF-28800F.)
Random vibration
Operating ........................................ 5 to 500 Hz, 0.3 grms
(with solid-state hard drive)
Nonoperating .................................. 5 to 500 Hz, 2.4 grms
(Tested in accordance with IEC-60068-2-64. Nonoperating test
profile exceeds the requirements of MIL-PRF-28800F, Class B.)
Note For EMC compliance, operate this device with shielded cabling. In addition, all
covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC)
for this product for any additional regulatory compliance information. To obtain the DoC
for this product, visit ni.com/certification, search by model number or product line,
and click the appropriate link in the Certification column.
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
•
•
IEC 61010-1, EN 61010-1
UL 61010-1
CAN/CSA C22.2 No. 61010-1
Note For UL and other safety certifications, refer to the product label or visit
ni.com/certification, search by model number or product line, and click the
appropriate link in the Certification column.
© National Instruments Corporation
A-3
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Electromagnetic Compatibility
Emissions................................................EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity ................................................EN 61326:1997 + A2:2001,
Table 1
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Note For EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC).....................................89/336/EEC
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification, search by model number or product line, and click the
appropriate link in the Certification column.
NI PXI-8184
Electrical
Current (A)
Voltage (V)
+3.3
Typical
Maximum
4 A
3.0 A
4.5 A
0.01 A
0 A
+5
6 A
+12
0.04 A
0 A
–12
NI PXI-8184/8185 User Manual
A-4
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Physical
Board dimensions................................... PXI 3U-size module
6.1 × 13 × 21.6 cm
(2.4 × 5.1 × 8.5 in.)
Slot requirements ................................... One system slot plus
two controller expansion slots
Compatibility ......................................... Fully compatible with
PXI specification
MTBF..................................................... 226,000 h
Weight.................................................... 0.64 Kg (1.41 lb) typical
Operating Environment
Ambient temperature range
Chassis
PXI-1000B
PXI-1002
PXI-1006
PXI-1010
PXI-1011
PXI-1042
PXI-1045
NI PXI-8184
5–50 °C
5–40 °C
5–50 °C
5–35 °C
5–50 °C
5–50 °C
5–55 °C
(Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2.)
Relative humidity range......................... 10% to 90%, noncondensing
(Tested in accordance with
IEC-60068-2-56.)
Altitude................................................... 2,000 m (at 25 °C ambient
temperature)
Pollution Degree .................................... 2
For indoor or enclosed area use only.
© National Instruments Corporation
A-5
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Caution Clean the PXI-8184 with a soft nonmetallic brush. Make sure that the device is
completely dry and free from contaminants before returning it to service.
Storage Environment
Ambient temperature range ....................–20 to 65 °C (Tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2.)
Relative humidity range..........................5% to 95% noncondensing
(Tested in accordance with
IEC-60068-2-56.)
Shock and Vibration
Operational shock...................................30 g peak, half-sine, 11 ms pulse
(Tested in accordance with
IEC-60068-2-27. Test profile
developed in accordance with
MIL-PRF-28800F.)
Random vibration
Operating.........................................5 to 500 Hz, 0.3 grms
(with solid-state hard drive)
Nonoperating...................................5 to 500 Hz, 2.4 grms
(Tested in accordance with IEC-60068-2-64. Nonoperating test
profile exceeds the requirements of MIL-PRF-28800F, Class B.)
Note For EMC compliance, operate this device with shielded cabling. In addition, all
covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC)
for this product for any additional regulatory compliance information. To obtain the DoC
for this product, visit ni.com/certification, search by model number or product line,
and click the appropriate link in the Certification column.
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
•
•
IEC 61010-1, EN 61010-1
UL 61010-1
CAN/CSA C22.2 No. 61010-1
NI PXI-8184/8185 User Manual
A-6
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Specifications
Note For UL and other safety certifications, refer to the product label or visit
ni.com/certification, search by model number or product line, and click the
appropriate link in the Certification column.
Electromagnetic Compatibility
Emissions ............................................... EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity................................................ EN 61326:1997 + A2:2001,
Table 1
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Note For EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety) ............. 73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .................................... 89/336/EEC
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification, search by model number or product line, and click the
appropriate link in the Certification column.
© National Instruments Corporation
A-7
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Technical Support and
Professional Services
Visit the following sections of the National Instruments Web site at
ni.comfor technical support and professional services:
•
Support—Online technical support resources at ni.com/support
include the following:
–
Self-Help Resources—For immediate answers and solutions,
visit the award-winning National Instruments Web site for
software drivers and updates, a searchable KnowledgeBase,
product manuals, step-by-step troubleshooting wizards, thousands
of example programs, tutorials, application notes, instrument
drivers, and so on.
–
Free Technical Support—All registered users receive free Basic
Service, which includes access to hundreds of Application
Engineers worldwide in the NI Developer Exchange at
ni.com/exchange. National Instruments Application Engineers
make sure every question receives an answer.
•
•
•
Training and Certification—Visit ni.com/trainingfor
self-paced training, eLearning virtual classrooms, interactive CDs,
and Certification program information. You also can register for
instructor-led, hands-on courses at locations around the world.
System Integration—If you have time constraints, limited in-house
technical resources, or other project challenges, National Instruments
Alliance Partner members can help. To learn more, call your local
NI office or visit ni.com/alliance.
Declaration of Conformity (DoC)—A DoC is our claim of
compliance with the Council of the European Communities using
the manufacturer’s declaration of conformity. This system affords
the user protection for electronic compatibility (EMC) and product
safety. You can obtain the DoC for your product by visiting
ni.com/certification.
•
you can obtain the calibration certificate for your product at
ni.com/calibration.
© National Instruments Corporation
B-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Technical Support and Professional Services
If you searched ni.comand could not find the answers you need, contact
your local office or NI corporate headquarters. Phone numbers for our
worldwide offices are listed at the front of this manual. You also can visit
the Worldwide Offices section of ni.com/niglobalto access the branch
office Web sites, which provide up-to-date contact information, support
phone numbers, email addresses, and current events.
NI PXI-8184/8185 User Manual
B-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Symbol
Prefix
nano
micro
milli
kilo
Value
10–9
10– 6
10–3
103
n
µ
m
k
M
G
T
mega
giga
106
109
tera
1012
Symbols
°
Degrees
Ohms
Ω
%
Percent
A
A
Amperes
AC
ASIC
Alternating Current
Application-specific integrated circuit
B
B
Bytes
backplane
An assembly, typically a printed circuit board, with connectors and signal
paths that bus the connector pins
© National Instruments Corporation
G-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
BIOS
Basic Input/Output System. BIOS functions are the fundamental level of
any PC or compatible computer. BIOS functions embody the basic
operations needed for successful use of the computer’s hardware resources.
C
C
Celsius
cache
Small portion of high-speed memory used for temporary storage of
frequently used data
CMOS
Complementary Metal Oxide Semiconductor; a process used in making
chips
CompactPCI
An adaptation of the PCI specification for industrial and/or embedded
applications that require a more robust mechanical form factor than desktop
PCI. CompactPCI provides a standard form factor for those applications
requiring the high performance of PCI as well as the small size and
ruggedness of a rack-mount system.
D
DC
Direct Current
DIMM
DMA
Dual In-line Memory Module
Direct Memory Access; a method by which data is transferred between
devices and internal memory without intervention of the central processing
unit
DRAM
Dynamic RAM (Random Access Memory); storage that the computer must
refresh at frequent intervals
E
ECP
Extended Capabilities Parallel
EDO
EEPROM
Extended Data Out
Electronically Erasable Programmable Read Only Memory
NI PXI-8184/8185 User Manual
G-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
embedded controller
An intelligent CPU (controller) interface plugged directly into the PXI
backplane, giving it direct access to the PXI bus. It must have all of its
required PXI interface capabilities built in.
EMC
Electromagnetic Compatibility
Electromagnetic interference
Enhanced Parallel Port
EMI
EPP
expansion ROM
An onboard EEPROM that may contain device-specific initialization and
system boot functionality
F
FCC
Federal Communications Commission
G
g
1. Grams
2
2. A measure of acceleration equal to 9.8 m/s
GPIB
grms
General Purpose Interface Bus (IEEE 488)
A measure of random vibration. The root mean square of acceleration
levels in a random vibration test profile.
H
Hz
Hertz; cycles per second
I
I/O
Input/output; the techniques, media, and devices used to achieve
communication between machines and users
IDE
IEEE
in.
Integrated Drive Electronics; hard disk and built-in controller
Institute of Electrical and Electronics Engineers
Inches
© National Instruments Corporation
G-3
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
instrument driver
A set of routines designed to control a specific instrument or family of
instruments, and any necessary related files for LabWindows/CVI or
LabVIEW
interrupt
interrupt level
IRQ*
A means for a device to request service from another device
The relative priority at which a device can interrupt
Interrupt signal
ISA
Industry Standard Architecture; the original PC bus architecture,
specifically the 16-bit AT bus
K
KB
Kilobytes of memory
L
LAN
Local Area Network; communications network that serves users within
a confined geographical area. It is made up of servers, workstations, a
network operating system, and a communications link.
LED
Light-emitting diode
M
m
Meters
master
A functional part of a PXI device that initiates data transfers on the PXI
backplane. A transfer can be either a read or a write.
MB
Megabytes of memory
Mean time between failure
Mean time to repair
MTBF
MTTR
NI PXI-8184/8185 User Manual
G-4
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
N
NI-488 or NI-488.2
The National Instruments software for GPIB systems
NI-DAQ
The National Instruments software for data acquisition instruments
The National Instruments implementation of the VISA standard; an
NI-VISA
interface-independent software that provides a unified programming
interface for VXI, GPIB, and serial instruments
NMI
Non-maskable interrupt; high-priority interrupt that cannot be disabled by
another interrupt. It is used to report malfunctions such as parity, bus and
math coprocessor errors.
P
PCI
Peripheral Component Interconnect. The PCI bus is a high-performance
32-bit or 64-bit bus with multiplexed address and data lines.
PCMCIA
peripheral
Personal Computer Memory Card International Association
Any hardware device connected to a computer, such as a monitor,
keyboard, printer, plotter, disk or tape drive, graphics tablet, scanner,
mouse, and so on
POST
PXI
Power On Self Test
PCI eXtensions for Instrumentation; an open implementation of
CompactPCI that adds electrical features that meet the high-performance
requirements of instrumentation applications by providing triggering, local
buses, and system clock capabilities. PXI also offers two-way
interoperability with CompactPCI products.
R
RAM
Random Access Memory; the computer’s primary workspace
RAMDAC
Random Access Memory Digital to Analog Converter; the VGA controller
chip that maintains the color palette and converts data from memory into
analog signals for the monitor
© National Instruments Corporation
G-5
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
resource
Hardware settings used by devices in a computer system, including ISA
interrupt level, DMA channel, and I/O address
RMS
RTC
Root mean squared. See also grms.
Real Time Clock; an electronic circuit that maintains the time of day,
and also can provide timing signals for timesharing operations
S
s
Seconds
slave
A functional part of a PXI device that detects data transfer cycles initiated
by a PXI bus master and responds to the transfers when the address
specifies one of the device’s registers
SO-DIMM
SRAM
Small Outline Dual In-line Memory Module
Static RAM; a memory chip that requires power to hold its content. It does
not require refresh circuitry as a dynamic RAM chip, but it does take up
more space and uses more power.
ST
Start Trigger
Star Trigger Slot
This slot is located at Slot 2 in a PXI mainframe and has a dedicated trigger
line between each peripheral slot. This slot would be used for a module
with ST functionality that can provide individual triggers to all other
peripherals.
U
USB
Universal Serial Bus
V
V
Volts
VGA
Video Graphics Array; the minimum video display standard for all PCs
W
W
Watts
NI PXI-8184/8185 User Manual
G-6
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
general questions, 4-1
operating system, 4-4
PXI configuration, 4-8
A
Advanced Setup menu, 2-6
upgrade information, 4-6
configuration, common questions
boot options, 4-2
B
BIOS
checking settings, 4-1
flashing new BIOS, 4-7
setup
chassis configuration, 4-4
driver installation, 4-4
Advanced Setup menu, 2-6
Boot Setup menu, 2-10
DMI Event Logging menu, 2-6
entering, 2-4
Exiting BIOS Setup menu, 2-10
Integrated Peripherals menu, 2-7
LabVIEW RT Setup menu, 2-8
Main Setup menu, 2-5
signals, 3-4
Ethernet connector and signals, 3-5
parallel port connector and signals, 3-6
peripheral expansion overview (table), 3-1
PS/2 connector and signals, 3-9
PXI Setup menu, 2-8
Boot Setup menu, 2-10
C
calibration certificate (NI resources), B-1
CD-ROM drive, installing software from, 4-4
chip set north bridge, 1-4
data storage, 3-11
chip set south bridge, 1-4
Declaration of Conformity (NI resources), B-1
diagnostic tools (NI resources), B-1
directories and files installed on hard drive, 2-14
DMI Event Logging menu, 2-6
documentation
how to use this documentation set, vii
NI resources, B-1
DRIVE LED, 3-10
CMOS, setting back to default, 5-2
COM1 and COM2 connectors
connector locations and pinout (figure), 3-4
connector signals (table), 3-5
common configuration questions
boot options, 4-2
cables and connections, 4-3
chassis configuration, 4-4
driver installation, 4-4
© National Instruments Corporation
I-1
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
drivers, 2-14
installation
See also configuration
installation, video, 4-4
obtaining latest drivers, 4-7
drivers (NI resources), B-1
configuration in MAX (figure), 4-5
injector/ejector handle position
(caution), 2-2
(figure), 2-3
E
Ethernet, connector
location and pinout (figure), 3-5
signals (table), 3-6
removing NI PXI-8184/8185 from PXI
chassis, 2-4
removing protective screw caps
(figure), 2-2
examples (NI resources), B-1
instrument drivers (NI resources), B-1
F
files and directories installed on hard
drive, 2-14
keyboard and mouse
floppy drive, using external floppy drive, 4-8
front panel
logic block, 1-4
overview (table), 3-1
connectors, 3-1
into controller, 4-3
dimensions, 3-2
functional overview of NI PXI-8184/8185, 1-2
H
LabVIEW, 1-5
hard drive, 3-11
LabVIEW RT configuration
switches, 2-12, 2-14
files and directories installed on, 2-14
recovery, 2-17
LabVIEW RT Setup menu, 2-8
LabWindows/CVI, 1-5
LEDs, front panel LEDs, 3-10, 4-1
LPT cable, connecting to NI
PXI-8184/8185, 4-3
help
technical support, B-1
I
IDE controller, using SCSI hard drive in
addition, 4-1
M
IDE logic block, 1-4
images directory, 2-14
Main Setup menu, 2-5
manuals directory, 2-14
NI PXI-8184/8185 User Manual
I-2
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
mating connector
COM1 and COM2, 3-4
data storage, 3-11
front panel
features, 3-10
parallel port, 3-6
LEDs, 4-1
USB, 3-8
VGA, 3-3
system reset pushbutton, 3-10
front panel dimensions, 3-2
functional overview, 1-2
hard drive recovery, 2-17
installing in a PXI chassis, 2-1
(figure), 2-3
mouse, plugging PS/2 mouse and keyboard
into controller, 4-3
logic blocks, 1-4
modules, 1-2
National Instruments software, 1-4
peripheral expansion overview
(table), 3-1
PXI trigger connectivity, 2-15
removing from a PXI chassis, 2-4
software, 1-4
N
National Instruments software, 1-4
services, B-1
NI PXI-8184, 1-2
specifications
CE compliance, A-7
electrical, A-4
electromagnetic compatibility, A-7
operating environment, A-5
physical, A-5
specifications, A-1
troubleshooting, 5-1
upgrading RAM, 2-15, 4-6
using external floppy drive with, 4-8
using with chassis, 4-4
safety, A-6
shock and vibration, A-6
storage environment, A-6
NI PXI-8184/8185
NI PXI-8185, 1-2
specifications
CE compliance, A-4
BIOS setup, 2-4
block diagram, 1-3
connectors, 3-1
electrical, A-1
electromagnetic compatibility, A-4
operating environment, A-2
physical, A-1
safety, A-3
shock and vibration, A-3
storage environment, A-2
signals, 3-4
signals, 3-6
PS/2 connector and signals, 3-9
trigger connector and signals, 3-10
VGA connector and signals
(table), 3-3
NI support and services, B-1
NI-DAQ function library, 1-4
NI-VISA high-level programming API, 1-5
VGA connectors and signals, 3-3
© National Instruments Corporation
I-3
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
O
S
os directory, 2-14
OS installation
Security Setup menu, 2-9
serial ports, 3-1
from CD-ROM, 2-17
from network, 2-18
slot 1 CPU, 1-4
SO-DIMM logic block, 1-4
SO-DIMMs
P
from National Instruments
(note), 2-16, 4-6
parallel port
(figure), 3-6
installing, 2-15, 4-6
(figure), 2-16, 4-7
See also drivers
PCI bus, standard for desktop computer
designs, 1-1
POWER OK LED, 3-10
programming examples (NI resources), B-1
protective screw caps, removing (figure), 2-2
PS/2
installed on your hard drive, 2-14
installing from CD-ROM, 4-4
LabVIEW, 1-5
National Instruments software, 1-4
NI-DAQ, 1-4
NI-VISA, 1-5
software (NI resources), B-1
NI PXI-8184, A-4
NI PXI-8185, A-1
super I/O logic block, 1-4
support
technical, B-1
switches
LabVIEW RT configuration, 2-12
system CMOS, 2-11
(figure), 3-9
controller, 4-3
PXI benefits, 1-1
PXI connectors, function (logic block), 1-4
PXI features, 2-15
PXI Setup menu, 2-8
PXI trigger connectivity, 2-15
PXI-8220, using NI PXI-8184/8185 with, 4-8
pxisys.ini file, 4-4
R
technical support, B-1
RAM
training and certification (NI resources), B-1
trigger, 3-10, 4-8
SO-DIMMs from National Instruments
connector location and pinout
(figure), 3-10
connector signals (table), 3-10
upgrading, 2-15, 4-6
related documentation, viii
NI PXI-8184/8185 User Manual
I-4
ni.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
troubleshooting
CMOS reset, 5-2
Web resources, B-1
controller does not boot, 5-1
damaged module, 5-2
video display, 5-2
troubleshooting (NI resources), B-1
Y-splitter cable
figure, 4-3
obtaining replacement, 4-3
U
using mouse and keyboard without, 4-3
using with PS/2 mouse and keyboard, 2-3,
3-9
Universal Serial Bus (USB)
connector function, 1-4
connector location and pinout
(figure), 3-8
overview (table), 3-1
V
VGA
connector signals (table), 3-3
location and pinout (figure), 3-3
overview (table), 3-1
video, 3-1
See also VGA
driver installation, 4-4
© National Instruments Corporation
I-5
NI PXI-8184/8185 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
|