Step 1. Prepare the modem.
Unplug the modem’s power. If it has
a battery backup, remove the
battery.
Step 2. Power on the
Step 3. Cable the modem.
Cable the modem to the Internet port of
the router with an Ethernet cable.
Installation Guide
modem.
Plug in your modem. Put the
battery back in and turn on your
modem.
Wait approximately two minutes
until your modem turns on.
WNR2020 N300 Wireless Router
Package Contents
Step 4. Power on the router.
Connect the power adapter to the
router, then plug it into an outlet.
DSL or cable
Wait for the WiFi LED
to light.
Internet
Step 5. Connect a computer.
You can use an Ethernet cable or
connect with WiFi.
To connect with WiFi, use the WiFi
network name and password on the
router label.
Router
Power adapter
Ethernet cable
Router
Front and Back Views
Modem
Step 6. Launch a browser.
NETGEAR genie displays.
Follow the genie steps to connect to
the Internet.
(Not included)
If you do not see genie, type
www.routerlogin.net. Then type
admin for the user name and
password for the password.
WPS/Reset button
Power input
Internet port
Ethernet LAN ports
Internet LED Ethernet LAN port LEDs
Power LED
WiFi LED
Download from Www.Somanuals.com. All Manuals Search And Download.
|