Step 1.
Unplug the power
to turn off your modem.
Step 2.
Step 3.
Plug in, then turn on your modem.
Installation Guide
Connect one end of the blue
Ethernet cable to your modem,
and the other end to the Internet
port on your router.
AC750 Wireless Dual Band Gigabit Router JR6150
Package Contents
Wait approximately 2 minutes
until your modem turns on.
If your modem has a battery backup,
first remove and reinsert the battery
before connecting your modem to power.
DSL
or Cable
Internet
AC750 Wireless Dual
Band Gigabit Router
Power
On/Off
AC750 Wireless Dual Band Gigabit Router
Modem
(not included)
Step 4.
Step 5.
Connect the router
to your computer.
Step 6.
Open a browser.
Power adapter
Ethernet cable
Connect the power adapter to the
router, then plug it into an outlet.
Wait until the Wireless LED turns
solid green.
If the web page does not display,
close and reopen the browser and
in the address bar, or check the
“Troubleshooting” chapter of the
user manual.
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
If none of the LEDs light, make sure that the
Power On/Off button is in the on position
(pushed in).
(Optionally) Connect wirelessly by using the
preset wireless security settings located
on the bottom label.
Download from Www.Somanuals.com. All Manuals Search And Download.
|