Product and Publication Details
Model Number:
XE102
Publication Date:
Product Family:
June 2007
Ethernet bridge
Product Name:
XE102 Wall-Plugged Ethernet Bridge
Home or Business Product:
Language:
Home
English
Publication Part Number:
202-10114-01
Publication Version Number: 1.0
Technical Support
See the support information card that shipped with your product. By registering your product at
timely notices of product and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support
information card.
E-mail: [email protected]
iii
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
XE102 Wall-Plugged Ethernet Bridge User Guide
Package Contents .............................................................................................................1
Label Information and Status Lights ..................................................................................1
The Label ....................................................................................................................1
Front Panel Status Lights ............................................................................................2
How Ethernet Bridges Fit in Your Network ........................................................................3
Prepare to Install Your Ethernet Bridges ...........................................................................3
Connect an XE102 Ethernet Bridge to the Router .............................................................4
Connect Other XE102 Ethernet Bridges ............................................................................4
(Highly Recommended) .....................................................................................................5
Understanding the PowerLine Network Password ......................................................5
Installing the PowerLine Encryption Utility ..................................................................5
Set Your Network Password ..............................................................................................7
Entering the Device Passwords ..................................................................................7
Setting the Network Password ....................................................................................8
Add a Device to an Existing PowerLine Network ..............................................................9
Troubleshooting ............................................................................................................... 11
NETGEAR Product Registration, Support, and Documentation ............................... 11
Basic Functioning ...................................................................................................... 11
Default Configuration Settings .........................................................................................12
Technical Specifications ...................................................................................................13
i
v1.0, May 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
v1.0, May 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
The XE102 Wall-Plugged Ethernet Bridge User Guide describes how to install, configure, and
troubleshoot the NETGEAR® XE102 Ethernet Bridge or the NETGEAR XE102G Ethernet
Extender Kit. The information in this manual is intended for readers with intermediate computer
and Internet skills. For information about product features, see the NETGEAR website at http://
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following sections.
•
Typographical conventions. This manual uses the following typographical conventions.
Italics
Emphasis, books, CDs, URL names
User input
Bold
•
Formats. This manual uses the following formats to highlight special messages.
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
•
Scope. This manual is written for the XE102 Ethernet Bridge according to these
specifications.
Product version
XE102 Wall-Plugged Ethernet Bridge
June 2007
Manual publication date
iii
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Product updates are available on the NETGEAR website at
How to Print This Manual
To print this manual, you can choose one of the following options, according to your needs. Your
computer must have the free Adobe Acrobat Reader installed in order to view and print PDF files.
•
Printing a chapter. Use the PDF of This Chapter link at the top left of any page.
–
Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
–
Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer toner by selecting this feature.
•
Printing the full manual. Use the Complete PDF Manual link at the top left of any page.
–
Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
–
Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer toner by selecting this feature.
iv
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Package Contents
The product package should contain the following items:
•
•
•
Depending on the package, one or two XE102 Wall-Plugged Ethernet Bridges
6-ft (1.83m) Ethernet cable
XE102 Resource CD, including:
— This User Guide.
— XE102 Installation Guide.
— Encryption utility
•
Printed Warranty Registration Card, and Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the Ethernet bridge for
repair.
Label Information and Status Lights
The Ethernet bridge has a label with important information and status light indicators. Familiarize
yourself with these features of your product.
The Label
The label on the back of the Ethernet bridge provides the following information:
•
•
•
•
MAC address
Model number
Serial number
Unique device password (PWD)
1
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Front Panel Status Lights
The front panel of the XE102 contains status lights. You can use them to verify connections. The
table below describes the lights on the front panel.
Table 1. Front Panel Status Light Descriptions
Status
Front Panel
Description
Light
Power
• On green solid. Power is supplied to the Ethernet bridge.
• Off. Power is not supplied to the Ethernet bridge.
HomePlug • On. The HomePlug port has detected another PowerLine device on
the PowerLine network.
• Blink. Data is being transmitted or received on the PowerLine
network.
• Off. No other PowerLine devices detected on the PowerLine network.
Ethernet • On green solid. The Ethernet port is linked but there is no activity.
• Blink. Data is being transmitted or received on the Ethernet port.
• Off. No link is detected.
2
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
How Ethernet Bridges Fit in Your Network
You can use the XE102 Ethernet Bridges to extend an Ethernet local area network (LAN)
anywhere in your house using your existing electrical power line. The following figure shows an
example of a network that includes two XE102 Ethernet Bridges and several other network
connections.
XE102 Ethernet Bridge
XE102 Ethernet Bridge
Modem
)NTERNET
ꢀꢁꢁꢁ -BPS 'IGABIT %THERNET
ꢂꢁꢁ -BPS 7IRELESS
ꢀꢃ -BPS 0OWER,INE
Router
ꢀꢁꢄꢀꢁꢁ -BPS %THERNET
ꢀꢅꢂ -BPS TYPICAL BROADBAND CONNECTION
Figure 1
Prepare to Install Your Ethernet Bridges
The XE102 is designed for easy installation. Check that these minimum requirements are met.
•
•
Your Ethernet network is set up and an Ethernet LAN port is available on your router.
Each computer or device to be used on your network has an Ethernet port.
3
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Connect an XE102 Ethernet Bridge to the Router
Warning: Do not connect the Ethernet bridges to power strips,
extension cords, or surge protectors as this may prevent them
from working properly or degrade the network performance.
Do not tie or twist the XE102 power cord with the dual output
cable, or any other Ethernet cable, as this may degrade the
network performance.
1. Disconnect your router from its power adapter.
2. Plug the XE102 Ethernet Bridge into an electrical outlet. Make sure that the electrical outlet is
not controlled by a wall switch so as to avoid someone unknowingly turning off power. Check
that the XE102 power light comes on.
3. Use the provided Ethernet cable to connect the XE102 Ethernet Bridge to an available
Ethernet LAN port on your router.
4. Apply power to your router. Wait for the router to indicate that the LAN port that is connected
to the XE102 Ethernet Bridge is linked and active. On the XE102, check that the Ethernet and
Powerline status LEDs are on and blinking. Refer to Table 1 for a detailed explanation of the
LED behavior.
Connect Other XE102 Ethernet Bridges
Tip: Before plugging in your other PowerLine devices, write down the device password
on the label. You will need it if you want to set up a PowerLine network password. If
you are working with several PowerLine devices, write down their MAC addresses.
1. Plug your other PowerLine devices into power outlets in your home near to the other
computers and peripherals to be included in your PowerLine local area network.
2. Use an Ethernet cable to connect an Ethernet port on each of the computers and peripherals to
the nearest PowerLine device.
3. When you plug in a second Ethernet bridge into a power outlet, check the HomePlug LEDs.
They should turn on and then briefly blink at the same time as the Ethernet activity LED.
4
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Install the XE102 PowerLine Encryption Utility
(Highly Recommended)
This utility gives you the option of setting a unique encryption PowerLine network password.
Understanding the PowerLine Network Password
•
•
The encryption password is not case-sensitive.
Each device must be set to exactly the same encryption password—if they are to communicate
on the same network. PowerLine devices on different networks will not be able to
communicate.
•
•
A default button resets the encryption password to the default password (HomePlug).
The encryption password can protect your network from unauthorized access through the
PowerLine network.
•
A device password is printed on each NETGEAR PowerLine product. This is not the network
password, but you must enter it if you are setting the network password with another Ethernet
bridge device.
Installing the PowerLine Encryption Utility
To install the PowerLine Encryption Utility:
1. Insert the XE102 Resource CD into a CD drive on the computer that is connected to your
router. The CD starts automatically.
If the CD does not start automatically:
•
Go to My Computer on the Windows Start menu, and double-click the drive that contains
the XE102 Resource CD or
•
Select the CD drive and click on the Autorun.exe executable file.
5
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
The Welcome screen opens:
Figure 2
2. Click Install Software.
You can check for upgrades or install the from the CD.
•
Check for Upgrades: An Internet connection is required. The CD software will check a
NETGEAR server for a newer version of the utility. If found, the newer version will be
downloaded and run.
•
Install from the CD: The setup program on the CD will run.
The InstallShield Wizard Welcome screen opens.
Figure 3
3. Click Next and follow the wizard instructions. When the installation is complete, click Finish.
6
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Set Your Network Password
Tip: Before you start, look on the label of each PowerLine device. Write down the
device password. If you are working with several PowerLine devices, also write
down the MAC address for each of them.
The fastest and most reliable way to set the network password is to set the password for all devices
at once. There are two steps to setting the password: first enter the device password for each
remote PowerLine device, and then set the network password.
Entering the Device Passwords
To enter the device passwords:
1. Make sure that all PowerLine devices are plugged into 100~240V AC wall sockets.
2. Click the PowerLine utility icon
.
The PowerLine encryption utility screen opens to the Main tab.
Figure 4
The utility lists all the remote PowerLine devices. The list does not include local PowerLine
devices (connected directly to the computer that you are using).
7
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
3. Select a PowerLine device.
Note: If more than one remote device is listed, you can identify each one from its
MAC address.
4. Click Enter Password.
Figure 5
5. Enter the password from the label on the back of the selected PowerLine device, and click OK.
6. Repeat this step for all devices that you want attached to your network.
Setting the Network Password
To set the network password:
1. Click the Security tab.
Figure 6
8
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
2. Type a password in the Private Network Password text box.
3. Click Set All Devices. A pop-up window indicates that the operation was successful.
Add a Device to an Existing PowerLine Network
To add a device to a PowerLine network with the default network password, all you need to do is
plug the new device into a power outlet.
If the network password has been set, then you must run the PowerLine encryption utility to set the
new device to the network password. How you do this depends on whether the computer running
the PowerLine encryption utility is connected directly to the new PowerLine device (local) or is
connected to a different device in the PowerLine network (remote).
Adding a New Device from a Locally Connected Computer
1. Plug the new PowerLine device into an available AC power outlet and connect it to an
Ethernet port on the computer.
2. Start the PowerLine encryption utility and select the Security tab.
3. Type the network password in the Private Network Password text box and click Set Local
Device Only.
4. Select the Main tab and check that the other devices in the PowerLine network appear in the
device list. It may take a minute or two for all devices in the network to be detected.
Adding a New Device from a Remotely Connected Computer
Tip: Before you start, look on the label of the new PowerLine device. Write down the
device password. If you are working with several PowerLine devices, also write
down the MAC address for each of them.
1. Plug the new PowerLine device into an AC power outlet.
9
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
2. Start the PowerLine encryption utility on the remote computer and select the Security tab.
Figure 7
3. Click Use Default (Public Network). The password in the Private Network Password text box
changes to the default password, HomePlug.
4. Click Set All Devices.
5. Select the Main tab and wait for the new PowerLine device to be listed.
6. Select the new PowerLine device from the device list, and click Enter Password.
7. In the pop-up window, enter the password from the back label of the device and click OK.
8. Select the Security tab.
9. Re-enter the network password in the Private Network Password text box, and then click Set
All Devices.
10
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Troubleshooting
This section gives information about troubleshooting your XE102 Wall-Plugged Ethernet Bridge.
NETGEAR Product Registration, Support, and Documentation
Product updates and Web support are available at:
When the Ethernet bridge is connected to the Internet, click the Knowledge Base or the
Documentation link under the Web Support menu to view support information or the
documentation for the Ethernet bridge.
Basic Functioning
After you plug in the Ethernet bridge, the following sequence of events should occur:
1. When power is first applied, verify that the Power light is on.
2. After approximately 10 seconds, check the LEDs on the Ethernet bridge. The following should
occur:
a. The power LED is solid green.
b. The blue HomePlug LED is lit.
c. The Ethernet LED blinks.
If any of these conditions does not occur, refer to the appropriate following section.
Power Light Not On
•
•
•
Make sure that, if power to the AC power outlet is controlled by a wall switch, the wall switch
is in the on position.
Verify that the wall socket is live. To do this, disconnect the Ethernet bridge and plug in
another electrical product, such as a lamp or a hairdryer.
If the Power LED still does not come on, and you have confirmed the power outlet is live, you
have a hardware problem and should contact technical support.
11
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
HomePlug Light Not On
If the power light is on but the HomePlug light is not, check the following:
•
Make sure that power is being provided to more than one PowerLine device. Another
PowerLine device must be installed for successful communication across the PowerLine.
•
Verify that the network password is the same on all devices in the PowerLine network.
Ethernet Light is Off
•
•
Make sure that the Ethernet cable is plugged in properly to a router LAN port.
On the attached Ethernet device or network adapter card, check that the Link light is on.
Default Configuration Settings
The following table shows default settings for the XE102 Wall-Plugged Ethernet Bridge.
Table 8. PowerLine Device Default Configuration Settings
Feature
Network
Description
Port Speed
Port Duplex
10/100 Mbps, Auto-negotiation
Auto-negotiation
Auto uplink
Administration
Device password
PowerLine
Encryption password
See product label.
HomePlug
12
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
Technical Specifications
The following table shows technical specifications for the XE102 Wall-Plugged Ethernet Bridge.
Table 9. Technical Specifications
Power input
100~240V AC
Dimensions
48mm x 72mm x 103mm (Height x Width x Length)
0.5 kg
Weight
Operating temperature
Operating humidity
Storage humidity
Powerline standard
HomePlug Frequency
Data transfer rate
Data Encoding
32° to 104° F (0° to 40°C)
10-90% maximum relative humidity, noncondensing
5-95% maximum relative humidity, noncondensing
HomePlug 1.0
4.3-20.9 Mhz
Up to 14 Mbps with real throughput > 4.2 Mbps.
HomePlug 1.0: Othogonal Frequency Division Multiplexing (OFDM),
DQPSK, DBPSK, ROBO
HomePlug Security
DES (56 bit)
Network Protocol
Compatibility
IEEE 802.3 (10Base-T); IEEE 802.3u (100Base-Tx); IEEE 802.3x (full-
duplex flow control)
Electromagnetic emissions
FCC Part 15 Class B; CE-Mark, commercial; 3-home FCC
Certificate; MIC
Power and Safety
UL Listed (UL 1950) /cUL IEC950; CE LVD
13
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
XE102 Wall-Plugged Ethernet Bridge User Guide
14
v1.0, June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|