Multiquip Riding Toy HTH44T User Manual
OPERATION AND PARTS MANUAL  
SERIES  
MODEL HTH44T  
RIDE-ON POWER TROWEL  
(KUBOTA V1505 DIESEL ENGINE)  
Revision #8 (03/27/12)  
To find the latest revision of this  
publication, visit our website at:  
www.multiquip.com  
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.  
P/N 20210  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SILICOSIS/RESPIRATORYWARNINGS  
WARNING WARNING  
SILICOSIS WARNING  
RESPIRATORY HAZARDS  
Grinding/cutting/drilling of masonry, concrete, metal and  
other materials with silica in their composition may give  
off dust or mists containing crystalline silica. Silica is a  
basic component of sand, quartz, brick clay, granite and  
numerous other minerals and rocks. Repeated and/or  
substantial inhalation of airborne crystalline silica can  
cause serious or fatal respiratory diseases, including  
silicosis. In addition, California and some other  
authorities have listed respirable crystalline silica as a  
substance known to cause cancer. When cutting such  
materials, always follow the respiratory precautions  
mentioned above.  
Grinding/cutting/drilling of masonry, concrete, metal and  
other materials can generate dust, mists and fumes  
containing chemicals known to cause serious or fatal  
injury or illness, such as respiratory disease, cancer,  
birth defects or other reproductive harm. If you are  
unfamiliar with the risks associated with the particular  
process and/or material being cut or the composition of  
the tool being used, review the material safety data  
sheet and/or consult your employer, the material  
manufacturer/supplier, governmental agencies such as  
OSHA and NIOSH and other sources on hazardous  
materials. California and some other authorities, for  
instance, have published lists of substances known to  
cause cancer, reproductive toxicity, or other harmful  
effects.  
Control dust, mist and fumes at the source where  
possible. In this regard use good work practices and  
follow the recommendations of the manufacturers or  
suppliers, OSHA/NIOSH, and occupational and trade  
associations. Water should be used for dust  
suppression when wet cutting is feasible. When the  
hazards from inhalation of dust, mists and fumes cannot  
be eliminated, the operator and any bystanders should  
always wear a respirator approved by NIOSH/MSHA for  
the materials being used.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 3  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TABLE OF CONTENTS  
Proposition 65 Warning ............................................ 2  
Silicosis/RespiratoryWarnings ................................. 3  
Table of contents...................................................... 4  
Parts ordering procedures ....................................... 5  
Training Checklist ..................................................... 6  
Daily Pre-Operation Checklist .................................. 7  
Safety Message Alert Symbols ............................ 8-9  
Rules For Safe Operation ...................................... 10  
Operation And Safety Decals................................. 11  
Specifications ......................................................... 12  
General Information ............................................... 13  
Spray Assy. ........................................................ 82-83  
Light Assy. .......................................................... 84-85  
Wiring Diagram ....................................................... 86  
KUBOTA V1505 ENGINE  
Crankcase Assembly ......................................... 88-89  
Oil Pan Assembly ............................................... 90-91  
Cylinder Head Assembly .................................... 92-93  
Gear Case Assembly ......................................... 94-95  
Dipstick and Guide Assembly ............................ 96-97  
Main Bearing Case Assembly ............................ 98-99  
Camshaft and Idle Gear Shaft Assembly ....... 100-101  
Piston and Crankshaft Assembly ................... 102-103  
Flywheel Assembly ........................................ 104-105  
Fuel Camshaft and Governor Shaft Assy. ...... 106-107  
Engine Stop Lever Assembly ......................... 108-109  
Stop Solenoid Assembly ................................. 110-111  
Injection Pump Assembly ............................... 112-113  
Nozzle Holder Assembly ................................ 114-115  
Nozzle Holder Assy(Component Parts) ......... 116-117  
Fork Lever (Governor) Assembly ................... 118-119  
Fuel Pump (Mechanical) Assembly................ 120-121  
Alternator and Pulley Assembly ..................... 122-123  
Alternator (Component Parts) Assembly ....... 124-125  
Starter Assembly ............................................ 126-127  
Starter (Component Parts) Assembly ............ 128-129  
Oil Switch/Thermometer & Plug Assy. ........... 130-131  
Water flang and Thermostat Assembly .......... 132-133  
Water Pump Assembly................................... 134-135  
Water Pipe Assembly ..................................... 136-137  
Fan Assembly................................................. 138-139  
Valve and Rocker Arm Assembly ................... 140-141  
Inlet Manifold Assembly ................................. 142-143  
Exhaust Manifold Assembly ........................... 144-145  
Turbo-Charger Assembly ............................... 146-147  
Oil Pipe Turbo-Charger Assembly.................. 148-149  
Hydraulic Pump Assembly ............................. 150-151  
Oil Cooler Assembly....................................... 152-153  
Glow Plug/Lamp and Timer Assembly ........... 154-155  
Engine Stand Assembly ................................. 156-157  
Accessories and Service Parts Assy. ............. 158-159  
Labels............................................................. 160-161  
WHITEMAN — HTH44T RIDE-  
ON POWER TROWEL  
Controls and Indicators ..................................... 14-15  
Initial Start-Up .................................................... 16-19  
Maintenance....................................................... 20-25  
Troubleshooting.................................................. 26-27  
Explanation of Codes In Remarks Column ............28  
Suggested Spare Parts & Service Items ................29  
Pivot Assy. (Left)................................................. 30-31  
Pivot Assy. (Right) .............................................. 32-33  
Twin Pitch Assy. (Left/Right) .............................. 34-37  
Engine (Kubota) ................................................. 38-39  
Engine Flange (Kubota) .................................... 40-41  
Engine Fuel (Kubota)......................................... 42-43  
Hydraulic Steering (Left).................................... 44-45  
Hydraulic Steering (Right) ................................. 46-47  
Steering Valve Assy. (Left) ................................. 48-49  
Steering Valve Assy. (Right)............................... 50-51  
Palm Handles (Left and Right) .......................... 52-53  
Hydraulic Drive Assembly .................................. 54-55  
Hydraulic Drive Pump Lever Assy. .................... 56-57  
Hydraulic Drive Filters and Cooling................... 58-59  
Five Blade Spider Assy. (Left) ........................... 60-61  
Five Blade Spider Assy. (Right) ......................... 62-63  
Stabilizer Ring Assy. .......................................... 64-65  
Locator Decals ................................................... 66-67  
Top Panel (Left) .................................................. 68-69  
Top Panel (Right) ............................................... 70-71  
Front Panel (Right) ............................................. 72-73  
Seat and Frame ................................................. 74-75  
Frame and Fuel Tank ......................................... 76-77  
Foot Pedals ........................................................ 78-79  
Battery ................................................................ 80-81  
Terms and Conditions of Sale — Parts ................. 162  
PAGE 4 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS ORDERING PROCEDURES  
Ordering parts has never been easier!  
Choose from three easy options:  
Effective:  
January 1st, 2006  
Best Deal!  
Order via Internet (Dealers Only)  
Order parts on-line using Multiquip’s SmartEquip website!  
:
If you have an MQ Account, to obtain a Username  
and Password, E-mail us at: parts@multiquip.  
com.  
■ View Parts Diagrams  
■ Order Parts  
■ Print Specification Information  
To obtain an MQ Account, contact your  
District Sales Manager for more information.  
Use the internet and qualify for a 5% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Goto www.multiquip.com and click on  
to log in and save!  
Order Parts  
Note: Discounts Are Subject To Change  
Fax your order in and qualify for a 2% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Order via Fax (Dealers Only)  
:
All customers are welcome to order parts via Fax.  
Domestic (US) Customers dial:  
1-800-6-PARTS-7 (800-672-7877)  
Note: Discounts Are Subject To Change  
Domestic (US) Dealers Call:  
Order via Phone:  
1-800-427-1244  
Non-Dealer Customers:  
International Customers should contact  
their local Multiquip Representatives for  
Parts Ordering information.  
Contact your local Multiquip Dealer for  
parts or call 800-427-1244 for help in  
locating a dealer near you.  
When ordering parts, please supply:  
❒
Dealer Account Number  
❒
Specify Preferred Method of Shipment:  
❒
❒
❒
❒
❒
Dealer Name and Address  
✓ UPS/Fed Ex  
✓ DHL  
✓ Truck  
■
■
Priority One  
Ground  
Shipping Address (if different than billing address)  
Return Fax Number  
■ Next Day  
Second/Third Day  
Applicable Model Number  
■
Quantity, Part Number and Description of Each Part  
NOTICE  
All orders are treated as Standard Orders and will  
ship the same day if received prior to 3PM PST.  
WE ACCEPT ALL MAJOR CREDIT CARDS!  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 5  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TRAINING CHECKLIST  
TRAINING CHECKLIST  
This checklist will lists some of the minimum requirements for  
machine maintenance and operation. Please feel free to detach  
it and make copies. Use this checklist whenever a new operator  
is to be trained or it can be used as a review for more  
experienced operator’s.  
TRAINING CHECKLIST  
DESCRIPTION  
NO.  
OK?  
DATE  
1
Read Operator’s Manual completely.  
Machine layout, location of components, checking of engine and hydraulic oil  
levels.  
2
3
4
Fuel system, refueling procedure  
Operation of spray and lights (if equipped).  
Operation of controls (machine not running).  
Safety controls, seat kill switch operation.  
Emergency stop procedures.  
5
6
7
8
Startup of machine, pre-heat (Kubota), engine choke.  
Maintaining a hover.  
9
10  
11  
12  
13  
14  
15  
16  
Maneuvering  
Pitching  
Matching blade pitch between towers. Twin Pitch™  
Concrete finishing techniques.  
Shutdown of machine.  
Lifting of machine (lift loops).  
Machine transport and storage.  
Operator _________________________________________ Trainee __________________________________________  
COMMENTS:  
PAGE 6 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— DAILY PRE-OPERATION CHECKLIST  
DAILY PRE-OPERATION CHECKLIST  
DAILY PRE-OPERATION CHECKLIST  
Engine oil level.  
1
2
3
4
5
6
7
Hydraulic oil level.  
Radiator coolant level.  
Condition of blades.  
Blade pitch operation.  
Kill switch (seat) operation.  
Steering control operation.  
COMMENTS:  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 7  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SAFETY MESSAGE ALERT SYMBOLS  
FOR YOUR SAFETY AND THE SAFETY OF OTHERS!  
HAZARD SYMBOLS  
Safety precautions should be followed at all times when operating  
this equipment. Failure to read and understand the Safety  
Messages and Operating Instructions could result in injury to  
yourself and others.  
Lethal Exhaust Gases  
Engine exhaust gases contain poisonous  
NOTE  
carbon monoxide. This gas is colorless and  
odorless, and can cause death if inhaled.  
NEVER operate this equipment in a confined  
area or enclosed structure that does not  
provide ample free flow air.  
This Owner's Manual has been developed to provide  
complete instructions for the safe and efficient operation  
of the MQ Whiteman HTH44T Ride-On Power Trowel.  
For engine maintenance information, please refer to the  
engine manufacturers instructions for data relative to its  
safe operations.  
Before using this Ride -On PowerTrowel, ensure that  
the operating individual has read and understands  
all instructions in this manual.  
Explosive Fuel  
Gasoline is extremely flammable, and its  
vapors can cause an explosion if ignited. DO  
NOT start the engine near spilled fuel or  
combustible fluids. DO NOT fill the fuel tank  
while the engine is running or hot. DO NOT  
overfill tank, since spilled fuel could ignite if it  
comes into contact with hot engine parts or  
sparks from the ignition system. Store fuel in  
approved containers, in well-ventilated areas  
and away from sparks and flames. NEVER  
use fuel as a cleaning agent.  
SAFETY MESSAGE ALERT SYMBOLS  
The three (3) Safety Messages shown below will inform you about  
potential hazards that could injure you or others. The Safety  
Messages specifically address the level of exposure to the  
operator, and are preceded by one of three words: DANGER,  
WARNING, or CAUTION.  
Burn Hazards  
DANGER: You WILL be KILLED or  
SERIOUSLY injured if you DO NOT follow  
directions.  
Engine components can generate extreme heat.  
To prevent burns, DO NOT touch these areas  
while the engine is running or immediately after  
operations. NEVER operate the engine with  
heat shields or heat guards removed.  
WARNING: You CAN be KILLED or  
SERIOUSLY injured if you DO NOT follow  
directions.  
Rotating Parts  
CAUTION: You CAN be injured if you  
DO NOT follow directions.  
NEVER operate equipment with covers, or  
guards removed. Keep fingers, hands, hair and  
clothing away from all moving parts to prevent  
injury.  
Potential hazards associated with HTH44T Ride-on Power  
Trowel operation will be referenced with Hazard Symbols which  
appear throughout this manual, and will be referenced in  
conjunction with Safety Message Alert Symbols.  
PAGE 8 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SAFETY MESSAGE ALERT SYMBOLS  
Accidental Starting  
Respiratory Hazard  
ALWAYS place the ON/OFF switch in the  
OFF position, and remove the key.  
ALWAYS wear approved respiratory  
protection.  
Over Speed Conditions  
Sight and Hearing hazard  
NEVER tamper with the factory settings of the  
engine governor or settings. Personal injury  
and damage to the engine or equipment can  
result if operating in speed ranges above  
maximum allowable.  
ALWAYS wear approved eye and hearing  
protection.  
Equipment Damage Messages  
NOTE  
This Ride-On Power Trowel, other property,  
or the surrounding environment could be  
damaged if you do not follow instructions.  
Other important messages are provided throughout this manual  
to help prevent damage to your trowel, other property, or the  
surrounding environment.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 9  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— RULES FOR SAFE OPERATION  
■
HighTemperatures – Allow the machine  
CAUTION  
and engine to cool before adding fuel or  
performing service and maintenance  
functions. Contact with hot components can  
cause serious burns.  
Failure to follow instructions in this manual may  
lead to serious injury or even death! This  
equipment is to be operated by trained and  
qualified personnel only! This equipment is  
for industrial use only and should not be  
regarded as a toy.  
Emergencies  
■
ALWAYS know the location of the  
nearest fire extinguisher and first aid kit.  
Know the location of the nearest telephone.  
Also know the phone numbers of the  
nearest ambulance, doctor and fire  
department. This information will be  
invaluable in the case of an emergency.  
The following safety guidelines should always be used when  
operating the HTH44T Ride-on PowerTrowel:  
GENERAL SAFETY  
■
■
■
■
DO NOT operate or service this equipment before reading  
this entire manual.  
Maintenance Safety  
This equipment should not be operated by persons under  
18 years of age.  
■
■
■
■
Disconnect the battery and spark plug wires before  
attempting any type of service.  
DO NOT operate this equipment unless all guards and  
safety devices are attached and in place.  
Securely support any machine components that must be  
raised.  
ALWAYS use proper heavy lifting techniques when moving  
equipment. This ride-on trowel is very heavy. It should be  
lifted only with a lifting device (i.e. crane, forklift, etc.) with  
a lifting capacity of at least one ton.  
NEVER lubricate components or attempt service on a  
running machine.  
ALWAYS allow the machine a proper amount of time to  
cool before servicing.  
■
■
■
■
ALWAYS check to make sure that the operating area is  
■
■
Keep the machinery in proper running condition.  
clear before starting the engine.  
Make sure that there is no buildup of concrete, grease, oil  
or debris on the machine.  
ALWAYS test the safety kill switch before operating the  
equipment.  
■
■
Fix damage to the machine immediately and always replace  
broken parts.  
NEVER place your feet inside the guard rings while starting  
or operating this equipment.  
Dispose of hazardous waste properly. Examples of  
potentially hazardous waste are used motor oil, fuel and  
fuel filters.  
NEVER operate this equipment without proper protective  
clothing, shatterproof glasses, steel-toed boots and other  
protective devices required by the job. Avoid wearing  
jewelry or loose fitting clothing that may snag on the controls  
or moving parts, this can cause a serious injury.  
■
■
DO NOT use food or plastic containers to dispose of  
hazardous waste.  
■
ALWAYS keep clear of rotating or moving parts while  
operating this equipment.  
DO NOT pour waste, oil or fuel directly onto the ground,  
down a drain or into any water source.  
■
■
NEVER leave the machine unattended while running.  
ALWAYS refuel in a well-ventilated area, away from sparks  
and open flames.  
■
ALWAYS use extreme caution when working with  
flammable liquids. When refueling, stop the engine and  
allow it to cool. DO NOT smoke around or near the machine.  
Fire or explosion could result from flames or sparks, or if  
fuel is spilled on a hot engine.  
■
Moving Parts – Shut down the engine before performing  
service or maintenance functions. Contact with moving  
parts can cause serious injury.  
PAGE 10 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— OPERATION AND SAFETY DECALS  
Machine Safety Decals  
The HTH44T series Ride-on Power Trowel is equipped with a number of safety decals. These decals are provided for operator  
safety and maintenance information. Table 1 below illustrates these decals as they appear on the machine. Should any of these  
decals become unreadable, replacements can be obtained from your dealer.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 11  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SPECIFICATIONS  
Figure 1. HTH44T Dimension /Specifications  
Table 2. HTH-44T Specifications  
A–Length – in. (cm)  
96.00 (243.8)  
50.0 (127)  
56.0 (142)  
1,545 (700)  
1,848 (838)  
TBA  
TBA  
1924 (9.9)  
44  
B–Width – in. (cm)  
C–Height – in. (cm)1  
Weight – lbs. (kgs.) Operating  
Weight – lbs. (kgs.) Shipping  
Sound Pressure – dBA2  
Vibration – ft/s2 (m/ s2)3  
Blade Tip Speed – FPM (m/s)  
Engine – H.P.  
Fuel Tank – gallons (liters)  
Rotor – RPM  
12 (45)  
0 to 160  
Path Width – in. (cm)  
92 (233)  
AW MV 68  
Kubota Diesel V1505-TE  
Hydraulic Oil4  
Engine  
manner  
NOTE:  
1. This value includes the seat height.  
most often experienced in “normal” circumstances.  
Values were obtained from all three axes of motion. The  
values shown represent the maximum RMS value from  
these measurements.  
2. Sound pressure is a weighted measure. Measured at the  
operators ear position while the ride-on trowel is operating  
at full throttle on concrete in a manner most often  
experienced in “normal” circumstances. Sound pressure  
may vary depending upon the condition of the concrete.  
Hearing protection is always recommended.  
4. “AW” stands for anti-wear and “MV” stands for multi-  
viscosity. The 68 refers to the general viscosity range  
and is similar to 10W-30-motor oil. It is recommended  
that AW MV 68 hydraulic oil be used. If this type of  
hydraulic oil is not available then use 10W-30.  
3. The vibration level indicated is the maximum RMS (Root  
Mean Square) value obtained at the handle grip while  
operating the ride-on trowel on curing concrete in a  
PAGE 12 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— GENERAL INFORMATION  
Dual joystick controls located to the left and right of the operator  
are provided for steering the HTH44T Ride-on Power Trowel.  
HTH44TRIDE-ONTROWEL FAMILIARIZATION  
The HTH44T series Ride-On Power Trowels are designed for  
the floating and finishing of concrete slabs.  
The joysticks are linked to three hydraulic steering cylinders  
located within the frame of the machine. When the right side  
steering joystick is moved either forward or backward it will  
cause that side of the Ride-on Power Trowel to move in either  
a forward or reverse direction. Moving the same joystick left  
or right causes the trowel to move in either the left or right  
direction.  
Take a walk around the HTH44T Ride-On Power Trowel. Take  
notice of all the entire major components (see Figures 2 and  
3, pages 14 and 15) like the engine, blades, pitch towers, air  
cleaner, ignition switch etc. Check that there is always oil in  
the engine, and hydraulic oil in the hydraulic oil reservoir.  
Read all the safety instructions carefully. Safety instructions  
will be found throughout this manual and on the machine. Keep  
all safety information in good, readable condition. Operators  
should be well trained on the operation and maintenance of  
the HTH44T Ride-On PowerTrowel.  
When the left side steering joystick is moved, it will cause the  
left side of the Ride-on Power Trowel to travel in either a  
forward or reverse direction.  
Hydraulic Pump  
Before using your HTH44T Ride-On Power Trowel, test it on a  
flat watered down section of finished concrete.This trial test run  
will increase your confidence in using the trowel and at the same  
time it will familiarize you with the trowel’s controls and indicators.  
In addition you will understand how the trowel will handle under  
actual conditions.  
Delivers a continuous controlled flow of hydraulic fluid to the  
hydraulic motors.  
CAUTION  
Engine  
This Ride-on Power Trowel is very heavy  
and awkward to move around. Use proper  
heavy lifting procedures and DO NOT  
attempt to lift the Ride-on Power Trowel by  
the guard rings  
The HTH44T Ride-On PowerTrowel is available with a standard  
V1505-TE Kubota diesel engine. Refer to the engine owner’s  
manual for specific instructions regarding engine operation.This  
manual is included with the ride-on trowel at the time of shipping  
from Whiteman. Please contact your nearest Multiquip Dealer  
for a replacement should the original manual disappear.  
Moving the Ride-On Trowel  
The HTH44T series Ride-on Power Trowel is designed to be  
moved and handled several ways. The easiest way to lift the  
ride-on trowel is to utilize the lift loops that are welded to the  
frame. These lift loops are located to the left and right sides of  
the operator’s seat (Figure 3, Page 15).  
Blades  
.
The blades of the Ride-on PowerTrowel finish the concrete as  
they are swirled around the surface. Blades are classified as  
float (10 or 8 inches wide), and finish (6 inches wide). The  
HTH44T is equipped with five blades per rotor equally spaced  
in a radial pattern and attached to vertical rotating shaft by  
means of a spider assembly.  
A strap or chain can be attached to these lift loops, allowing a  
forklift or crane to lift the Ride-on Power Trowel up onto a slab  
of concrete. The strap or chain should have a minimum 2,000  
pounds (1000-kg) lifting capacity and the lifting gear must be  
capable of lifting at least this amount.  
Hydraulic Motor  
Independent hydrostatic drive motors are coupled to the  
engine-powered hydrostatic pumps. Each motor drives a spider  
assembly.  
Training  
For proper training, please use the “TRAINING CHECKLIST”  
located in the front of this manual (Page 6). This checklist will  
provide an outline for an experienced operator to provide  
training to a new operator  
Hydraulic Steering  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 13  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— CONTROLS AND INDICATORS  
Figure 2. HTH44T Controls and Indicators (Front)  
10. Oil Indicator Light - Lights red when oil pressure is low.  
Figures 2 and 3 (pages 12 and 13) show the location of the  
controls, indicators and general maintenance parts. The  
function of each control, indicator or maintenance part is  
explained below:  
11. Steering Control (left side) -Allows the unit to move in a  
forward or reverse direction only.  
12. Retardant Spray Control Button – When pressed allows  
retardant spray to flow through the spray nozzle located  
at the front of the machine.  
1. Seat – Place for operator to sit. Engine will not start unless  
operator is seated. Seat is adjustable.  
2. Steering Control (right side) -Allows the unit to move  
13. Radiator/Filler Cap –Holds coolant or water necessary  
to keep engine at a safe operating temperature. Remove  
this cap to add water or antifreeze.  
in either a forward, reverse left or right direction.  
3. Throttle Control Lever – Controls the speed of the  
engine. Move the hand lever forward to increase engine  
speed (high), backwards to decrease engine speed (low).  
14. Kill Switch - Shuts down engine when operator is not  
sitting in seat.  
4. Light Switch – When activated, turns on six halogen  
15. Lights – Low voltage halogen light.  
lights. Lights offer better visibility when working indoors.  
16. Hydraulic Oil Filler Cap – Remove this cap to add  
5. Ignition Switch – With key inserted turn clockwise to  
hydraulic oil.  
start engine.  
17. Hydraulic Oil Sight Glass - Indicates the level of the  
6. Twin Pitch Control – Both pitch towers are linked  
together. One crank may be turned to adjust the blade  
pitch simultaneously or individually control for each set  
of blades.  
hydraulic oil in the reservoir.  
18. Right Foot Pedal – Controls blade speed. Slow blade  
speed is accomplished by slightly depressing the foot  
pedal. Maximum blade speed is accomplished by fully  
depressing the foot pedal.  
7. Pre-Heat Indicator Light - Lights blue during engine  
start-up. Indicates that engine glow plugs are being pre-  
heated. Light will go off after approximately 10 seconds.  
19. Spray Nozzle – Spray nozzle for retardant.  
20. Left Foot Riser – Operator foot rest pedal.  
8. Charge Indicator Light - Lights red when electrical  
21. Fuel Gauge/Filler Cap - Indicates the amount of fuel in  
system is not charging properly.  
the fuel tank. Remove this cap to add fuel.  
9. Water Indicator Light - Lights red when water  
22. Hydraulic Reservoir – Part of frame. Holds hydraulic oil  
temperature is high.  
necessary for pump operation.  
PAGE 14 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— CONTROLS AND INDICATORS  
Figure 3. HTH44T Controls and Indicators (Rear)  
23. Lift Loops –Located on both the left and right sides of  
29. Retardant Spray Tank - Holds 5 gallons of retardant or  
the main frame. Used when the trowel must be lifted onto  
a concrete slab.  
water.  
30. Battery - Provides +12V DC power to the electrical  
24. Engine Oil Dipstick – Indicates engine oil level.  
system.  
25. Engine Oil Filler Cap - Remove this cap to add engine  
31. Hydraulic Suction Filter - Filters hydraulic fluid prior to  
oil.  
entering the system.  
26. Air Filter – Prevents dirt and other debris from entering  
32. Hydraulic Return Filter - Filters hydraulic returning to  
the fuel system.  
reservoir.  
27. Oil Filter – Provides oil filtering for the engine.  
33. Documentation Box - Contains information regarding  
the trowel.  
28. Retardant Spray Motor – Used with the spray control  
button.  
NOTE  
The following section is intended as a basic guide  
to the Ride-On Power Trowel operation, and is  
not to be considered a complete guide to concrete  
finishing. It is strongly suggested that all operators  
(experienced and novice) read “Slabs on Grade”  
published by the American Concrete Institute,  
Detroit Michigan.  
NOTE  
Read this entire instruction manual  
Specification and part number  
completely before attempting to operate this  
are subject to change without  
machine.  
notice.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 15  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— INITIAL START-UP  
This section is intended to assist the operator with the initial  
start-up of the HTH44T series Ride-On Power Trowel. It is  
extremely important that this section be read carefully before  
attempting to use the trowel in the field.  
Fuel  
1. Determine if the engine fuel is low (Figure  
6). If fuel level is low, remove the fuel filler  
cap and fill with diesel fuel. Handle fuel  
safely. Motor fuels are highly flammable  
and can be dangerous if mishandled. DO  
NOT smoke while refueling. DO NOT attempt to refuel  
the ride-on trowel if the engine is hot or running.  
DO NOT use your Ride-On Power Trowel until this section is  
thoroughly understood  
CAUTION  
Failure to understand the operation of the  
HTH44T series Ride-On PowerTrowel could  
result in severe damage to the trowel or  
personal injury.  
See Figures 2 and 3 (Pages 12 and 13) for the location of any  
control or indicator referenced in this manual.  
Figure 6. Fuel Gauge  
CAUTION  
Engine Oil  
NEVER store the Ride-On Power Trowel  
with fuel in the tank for any extended period  
of time. ALWAYS clean up spilled fuel  
immediately.  
1. Pull the engine oil dipstick from its holder.  
2. Determine if engine oil is low (Figure 4), add correct  
amount of engine oil to bring oil level to a normal safe  
level.  
Starting the Engine  
1. With one foot on the ground and the other foot placed on  
the trowel’s platform, grab hold of any part of the frame  
and lift yourself onto the trowel. Then sit down in the  
operator’s seat  
CAUTION  
DO NOT grab hold of the joysticks or pitch  
tower assemblies to lift yourself onto the  
trowel. Pulling on the joysticks or pitch  
towers assemblies repeatedly will weaken  
the units. Use any part of the frame to lift  
yourself on the trowel.  
Figure 4. Engine Oil Dipstick  
Hydraulic Oil  
2. The Whiteman Ride-On Power Trowel is equipped with  
a safety kill switch. This switch is located beneath the  
seat assembly.Remember the engine will not start unless  
an operator is sitting in the operator’s seat. The weight  
of an operator depresses an electrical switch, which will  
allow the engine to start.  
1. Determine if the hydraulic oil is low by observing the level  
of oil in the hydraulic Oil Sight Glass (Figure 5).  
CAUTION  
NEVER disable or disconnect the kill switch.  
It is provided for the operators’ safety and  
injury may result if it is disabled,  
disconnected or improperly maintained.  
Figure 5. Hydraulic Oil Sight Glass  
PAGE 16 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— INITIAL START-UP  
5. Insert the ignition key into the ignition switch (Figure 8).  
CAUTION  
NEVER operate the  
trowel in a confined area  
or enclosed area structure  
that does not provide  
ample free flow of air.  
ALWAYS wear approved eye and hearing  
protection before operating the ride-on  
power trowel.  
Figure 8. Ignition Switch and Key  
6. Turn the ignition key clockwise to the (start) position.The  
oil and charge indicator lights (Figure 9) should be on.  
NEVER place hands or feet inside the guard  
rings while the engine is running. ALWAYS  
shut the engine down before performing any  
kind of maintenance service on the trowel.  
OIL  
WA  
T
E
R
CHARGE  
P
R
E
H
E
A
T
ON FOR APPROXIMATELY 5-10 SECONDS  
WHEN IGNITION SWITCH IS IN THE  
PRE HEAT POSITION.  
3. It is recommended that the kill switch be used to stop the  
engine after every use. Doing this will verify that the switch  
is working properly and presents no danger to the  
operator. Remember to turn the key to the “OFF” position  
after stopping the machine. Not doing so may drain your  
units’ battery  
OIL AND CHARGE INDICATOR LIGHTS  
COME ON WHEN IGNITION SWITCH IS  
IN THE  
POSITION.  
Figure 9. Oil and Charge Indicator Lights  
4. Place the engine throttle lever (Figure 7) in the LOW  
position.  
NOTE  
In cold weather turn the ignition key  
counter clockwise to the preheat position,  
wait until the BLUE preheat indicator goes  
off before turning the ignition key clockwise  
to the start position. Two or three preheat  
cycles may be necessary in very cold  
weather.  
Figure 7. Engine Throttle Control Lever (Low)  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 17  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— INITIAL START-UP  
7. Turn ignition key fully clockwise and listen for engine to  
start. Once engine has started release ignition key. Let  
engine warm for a few minutes.  
8. Place the engine throttle lever (Figure 10) in the HIGH  
position.  
Figure 12. Right Joystick  
Table 3. Joystick Directional Positioning  
JOYSTICK  
DIRECTION  
RESULTS  
Figure 10. Engine Throttle Control Lever (High)  
Causes only the left side  
of the ride-on trowel to  
move forward.  
Causes only the left side  
of the ride-on trowel to  
move backward.  
Causes only the right side  
of the ride-on trowel to  
move forward.  
Causes only the right side  
of the ride-on trowel to  
move backward.  
Left  
Move Joystick Forward  
9. The engine should be running at full RPM.  
Left  
Right  
Move Joystick Backward  
Move Joystick Forward  
Move Joystick Backward  
10. Repeat this section a few times to get fully acquainted  
with the engine starting procedure.  
NOTE  
Right  
All directional references with respect to  
the joysticks are from the operator’s seat  
position.  
Causes the ride-on trowel  
to move forward in  
a straight line.  
Move Both  
Joysticks Forward  
Left and Right  
Left and Right  
Causes the ride-on trowel  
to move backward  
Move Both  
Joysticks Backward  
in a straight line.  
Steering  
Causes the ride-on trowel  
to move to the right.  
Causes the ride-on trowel  
to move to the left  
Right  
Right  
Move Joystick Right  
Move Joystick Left  
Two joysticks (Figures 11 and 12) located to the left and right of  
the operator’s seat provide directional control for the HTH44T  
Ride-On PowerTrowel. Table 3 illustrates the various directional  
positions of the joysticks and their effect on the ride-on trowel.  
1. The foot pedal (Figure 13) solely controls blade speed.  
The position of the foot pedal determines the blade speed.  
Slow blade speed is obtained by slightly depressing the  
pedal. Maximum blade speed is obtained by fully  
depressing the pedal.  
Figure 11. Left Joystick Control  
Figure 13. Blade Speed Control Foot Pedal  
PAGE 18 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— INITIAL START-UP  
2. Push both the left and right joysticks forward (Figure 14).  
7. Push both the left and right joysticks backward (Figure  
15) and repeat steps 3 through 6 while substituting the  
word reverse for forward.  
Figure 14. Joystick Control Forward Direction  
3. With your right foot slowly depress the right foot pedal  
halfway. Notice that the ride-on power trowel begins to  
move in a forward direction. Release both joystick controls  
to stop forward movement then remove your right foot  
from the right foot pedal.  
Figure 15. Joystick Control Reverse Direction  
Engine Shut-Down  
1. Return the speed control lever (Figure 7) to low idle, and  
allow the engine to idle for 5 minutes .  
4. Practice holding the machine in one place as you increase  
blade speed. When about 75% of maximum blade speed  
has been reached, the blade will be moving at proper  
finishing speed. The machine may be difficult to keep in  
one place. Trying to keep the ride-on trowel stationary is  
a good practice for operation.  
NOTE  
Failure to allow the engine to idle for 5  
minutes before shutting engine OFF may  
lead to turbocharger damage.  
5. Practice maneuvering the Ride-on Power Trowel using  
the information listed in Table 3.Try to practice controlled  
motions as if you were finishing a slab of concrete.  
Practice edging and covering a large area  
2. Turn the ignition key counter-clockwise to the "starter  
switch contact " position, then remove the key.  
3. Clean and remove any foreign debris from the trowel.  
6. Try adjusting the pitch of the blades. This can be done  
with the ride-on trowel stopped or while the trowel is  
moving, whatever feels comfortable. Test the operation  
of optional equipment like retardant spray and lights if  
equipped.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 19  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— MAINTENANCE  
MAINTENANCE PROCEDURES  
NOTE  
Checking/Adjusting Blade Speed  
See the engine manual supplied with your  
machine for appropriate engine maintenance  
schedule and troubleshooting guide for  
problems.  
Because the two hydraulic drive motors operate independent  
of each other, the blade speed between them may vary. If the  
unit’s steering is difficult to control, the blade speeds may need  
to be checked, or if the spider is spinning noticeably faster or  
slower than the other side, the blade speed may need to be  
checked. It is also recommended that the blade speed be  
checked at least once a year.  
At the front of the book (Page 7) there is a “Daily Pre-Operation  
Checklist”. Make copies of this checklist and use it on a daily  
basis.  
Blade speed adjustment is a two-step process. First, the left  
spider’s speed should be checked and/or adjusted. Second,  
the right spider’s speed should be adjusted to match the left.  
CAUTION!  
Disconnect spark plug  
wires and battery cables  
before attempting any  
service or maintenance on  
Left Spider Speed Adjustment  
The left spider’s speed is adjusted by changing the length of  
the rod end spacing (Figure 16) at the front of the foot pedal.  
Lengthening the spacing increases the blade speed;  
shortening the spacing decreases the blade speed.  
the Ride-on Power Trowel.  
ALWAYS allow the engine to cool before  
servicing. NEVER attempt any maintenance  
work on a hot! (muffler, radiator, etc.) trowel.  
MAINTENANCE SCHEDULE  
Change the hydraulic oil and filter after the first 100 hours  
of use, then change every 250 hours.  
Daily (8-10 Hours)  
1. Check the fluid levels in the engine and reservoir, fill as  
necessary.  
Weekly (30-40 Hours)  
1. Relube arms, thrust collar and clutch  
2. Replace blades if necessary.  
Figure 16. Blade Speed Control Foot Pedal  
Right Spider Speed Adjustment  
3. Check and clean or replace the engine air filter as  
necessary.  
The right spider’s speed is adjusted by changing the length of  
the connecting rod on the pump actuation levers (Figure 17,  
Page 21). This rod is basically a turnbuckle. Rotating it in one  
direction increases the length and corresponding spider speed.  
Rotating it the opposite direction decreases the length and  
spider speed.The right spider’s speed should be within 3 rpm  
of the left.  
4. Replace engine oil and filter as necessary, see engine  
manual.  
Monthly (100-125 Hours)  
1. Remove, clean, reinstall and relube the arms and thrust  
collar. Adjust the blade arms.  
A good starting point in the adjustment process is to adjust  
the rod such that both spiders begin to rotate at the same time  
when the foot pedal is slowly depressed. This will, generally,  
get the speeds fairly close. Close enough for use if  
instrumentation is unavailable (i.e. on the job site). From this  
point on, some form of instrumentation is required to verify  
that the right spider speed is within the tolerance specified  
above. A strobe or magnetic pickup type speed indicator is  
recommended to verify the speeds.  
Yearly (500-600 Hours)  
1. Check and replace if necessary the arm bushings, and  
thrust collar bushings.  
2. Check pitch control cables for wear.  
3. Adjust blade speed.  
4. Replace hydraulic fluid and both hydraulic filters.  
NOTE  
The speeds should be adjusted on a dry concrete floor with  
the blades pitched flat. Units with a Kubota turbocharged  
engine should be set at 155-160 rpm with the engine at full  
speed.  
Change the hydraulic oil and filter after  
the first 100 hours of use, then change  
every 250 hours.  
PAGE 20 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— MAINTENANCE  
Figure 17. Pump Actuation Levers/Speed Control Rod  
Matching Blade Pitch for Both Sets of Blades  
There are some things to look for when checking to see if  
adjustment is necessary. Is the machine wearing out blades  
unevenly (i.e. one blade is completely worn out while the others  
look new)? Does the machine have a perceptible rolling or  
bouncing motion when in use? Look at the machine while it is  
running, do the guard rings “rock up and down” relative to the  
ground? Do the pitch control towers rock back and forth?These  
are some of the indications that the blade pitch may need to  
be adjusted using the adjustment bolts on the trowel blade  
finger.  
Sometimes it may be necessary to match blade pitch between  
the two sets of blades. There are some signs that this may be  
necessary. For example, the differences in pitch could cause  
a noticeable difference in finish quality between the two sets  
of blades. Or, the difference in blade pitch could make the  
machine difficult to control. This is due to the surface area in  
contact with the concrete (the blade set with the greater contact  
area tends to stick to the concrete more).  
To fix this problem, each spider assembly can be pitched  
individually.With a Single Pitch machine, the operator is forced  
to constantly make adjustments on each pitch tower. On a  
Twin Pitch machine, the operator must lift up on one of the  
pitch control handles, disengaging the linkage between the  
towers. Once this is done, a pitch control crank can be turned  
to adjust the difference. Make sure to lock the linkage back in  
place when finished with adjustments.  
Blade Pitch Adjustment Procedure  
Figure 18. Blade Pitch Adjustment Bolt  
The maintenance adjustment of blade pitch is an adjustment  
that is made by a bolt (Figure 18) on the arm of the trowel  
blade finger. This bolt is the contact point of the trowel arm to  
the lower wear plate on the thrust collar.The goal of adjustment  
is to promote consistent blade pitch and finishing quality.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 21  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— MAINTENANCE  
Changing A Blade  
The easiest and most consistent way to make this adjustment  
is to use the Trowel Arm Adjustment Fixture (P.N. 9177) that is  
manufactured by Whiteman. This fixture will allow consistent  
adjustment of the trowel arm fingers. It comes with all the  
hardware necessary to properly accomplish this maintenance  
and instructions on how to properly utilize this tool. Adjusting  
the trowel arm fingers without a fixture requires a special talent.  
Whiteman recommends that all the blades on the entire  
machine be changed at the same time. If only one or some of  
the blades are changed at one time, the machine will not finish  
concrete consistently and the machine may wobble or bounce.  
1. Place the machine on a flat, level surface.Adjust the blade  
pitch control to make the blades as flat as possible. Note  
the blade orientation on the trowel arm.This is important  
for ride-on trowels as the two sets of blades counter-  
rotate. Lift the machine up, placing blocks under the main  
guard ring to support it.  
If a trowel arm adjustment fixture is not available and immediate  
adjustment is necessary; we suggest the following procedure.  
If you can see or feel which blade is pulling harder, adjust the  
bolt that corresponds to that blade. Another way to determine  
which blades need adjustment is to place the machine on a  
flat surface and pitch the blades as flat as possible. Now, look  
at the adjustment bolts. They should all barely make contact  
with the lower wear plate on the spider. If you can see that  
one of them is not making contact; some adjustment will be  
necessary.  
2. Remove the bolts and lock washers on the trowel arm,  
and then remove the blade.  
3. Scrape all concrete and debris from the trowel arm. This  
is important to properly seat the new blade.  
4. Install the new blade, maintaining the proper orientation  
for direction of rotation.  
It will be possible to adjust the “high” bolts down to the level of  
the one that is not touching, or adjust the “low” bolt up to the  
level of the higher ones. If possible, adjust the low bolt up to  
the level of the rest of the bolts. This is the fastest way, but  
may not always work. Verify that after adjustment, the blades  
pitch correctly. Often times, if the blades are incorrectly  
adjusted, they will not be able to pitch flat. This occurs when  
the adjusting bolts have been raised too high. Conversely,  
sometimes the adjusting bolts are too low and the blades  
cannot be pitched high enough for finishing operations.  
5. Affix the bolts and lock washers.  
6. Repeat steps 2-5 for all remaining blades.  
PAGE 22 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— MAINTENANCE  
Checking Hydraulic Pressure  
Once the pressure gauges are installed and the spiders chained  
together, the system can be checked.  
It should be mentioned that most hydraulic problems are a  
result of low fluid levels. Before checking any other possibilities, With the foot pedal in the idle position and the engine at full  
make sure the hydraulic fluid level is half way up the sight speed, the pressure should be 200 to 300 psi. If the pressure  
glass which is located at the right end of the frame.  
is less than 200 psi, the charge system may need to be  
inspected and/ or serviced. In particular, the suction filter and  
charge pump relief valve should be checked.The suction filter  
may be plugged, or the relief valve may be stuck. Either  
condition may cause low charge pressure.  
Hydraulic pressure can be checked using a pressure gauge  
(Figure 19) with a range of at least 5,000 psi. Two male  
diagnostic quick couplers (one for each pump) are located in  
the elbow fittings (Figure 19) at the front of the pump. It is best  
to use two gauges simultaneously, but it is possible to use  
only one gauge and repeat the procedure for each side.  
With the engine at 50% to 70% of full speed, and spiders  
To fully test the hydraulic system, the spiders will need to be chained together, slowly depress the foot pedal and read the  
locked so that they cannot rotate. This can easily be done by gauges. The pressure should get to at least 3,100 psi. If the  
wrapping a chain around an arm on each spider, thus chaining pressure will not attain 3,100 psi, the pump should be inspected  
them together in the back of the trowel.  
and/or serviced by an authorized service representative.  
Figure 19. Pressure Gauge (Hydraulic Pump)  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 23  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— MAINTENANCE  
Checking Steering Pressure  
Lift the hinged radiator access cover and insert the test  
pressure gauge (300 to 600 PSI) as shown in Figure 20 into  
the left steering valve's diagnostic quick coupler.  
Run the engine at full RPM. The left steering valve's factory  
setting is 145 PSI, however some operators may prefer a more  
responsive steering (higher pressure required) and some  
operators may prefer a "softer feel" (lower pressure required).  
Figure 20. Pressure Gauge (Left Steering Valve)  
PAGE 24 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— MAINTENANCE  
Steering Pressure Adjustment  
The steering pressure should be checked with the engine at  
full RPM. It is not necessary to move either steering control  
during the pressure test.  
On the steering pressure relief valve use an open-end wrench  
to loosen the jam nut and an allen-wrench to adjust the  
steering pressure to the desired setting somewhere between  
115 and 180 PSI. Retighten the jam nut.  
Figure 21. Steering Pressure Adjustment  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 25  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TROUBLESHOOTING  
TABLE 4. TROUBLESHOOTING  
SYMPTOM  
POSSIBLE PROBLEM  
SOLUTION  
Make sure that the kill switch is functioning when the operator is  
seated; replace switch if necessary.  
Kill switch malfunction?  
Engine running rough or not at  
all.  
Look at the fuel system. Make sure there is fuel being supplied to  
the engine. Check to ensure that the fuel filter is not clogged.  
Fuel?  
Check to ensure that the ignition switch has power and is  
functioning correctly.  
Ignition?  
Other problems?  
Consult engine manufacturer’s manual.  
Check wiring. Replace as necessary.  
Loose wire connections?  
Safety kill switch not functioning.  
Bad contacts?  
Replace switch.  
Make certain blades are in good condition, not excessively worn.  
Finish blades should measure no less than 2" (50mm) from the  
blade bar to the trailing edge, combo blades should measure no  
less that 3.5" (89mm). Trailing edge of blade should be straight  
and parallel to the blade bar.  
Blades?  
Check that all blades are set at the same pitch angle as  
measured at the spider. A field adjustment tool is available for  
height adjustment of the trowel arms (see Optional Equipment).  
Spider?  
Check the spider assembly for bent trowel arms. If one of the  
arms is even slightly bent, replace it immediately.  
Bent trowel arms?  
Check the trowel arm bushings for tightness. This can be done by  
moving the trowel arms up and down. If there is more than 1/8"  
(3.2 mm) of travel at the tip of the arm, the bushings should be  
replaced. All bushings should be replaced at the same time.  
If trowel “bounces, rolls  
concrete, or makes uneven  
swirls in concrete”.  
Trowel arm bushings?  
Check the flatness of the thrust collar by rotating it on the spider.  
If it varies by more than 0.02" (0.5 mm) replace the thrust collar.  
Thrust collar?  
Check the thrust collar by rocking it on the spider. If it can tilt  
more than 1/16" (1.6 mm) [as measured at the thrust collar O.D.],  
replace the bushing in the thrust collar.  
Thrust collar bushing?  
Check the thrust bearing to see that it is spinning free.  
Replace if necessary.  
Thrust bearing worn?  
Blade pitch?  
Check blades for consistent pitch. Adjust per Maintenance section  
instructions if necessary.  
The main output shaft of the gearbox assembly should be  
checked for straightness. The main shaft must run straight and  
cannot be more than 0.003" (0.08 mm) out of round at the spider  
attachment point.  
Main shaft?  
Yoke?  
Machine has a perceptible  
rolling motion while running.  
Check to make sure that both fingers of the yoke press evenly on  
the wear cap. Replace yoke as necessary.  
PAGE 26 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TROUBLESHOOTING  
TABLE 4. TROUBLESHOOTING (CONTINUED)  
POSSIBLE PROBLEM  
SYMPTOM  
SOLUTION  
Check all electrical connections, including the master on/off switch  
and check to see if wiring is in good condition with no shorts.  
Replace as necessary.  
Wiring?  
Lights (optional) not working.  
Lights?  
Check to see if light bulbs are still good. Replace if broken.  
Check the tank to make sure retardant is present. Fill tank as  
necessary.  
Retardant?  
Check all electrical connections, including master on/off switch  
connections. Replace components and wiring as necessary.  
Wiring?  
Retardant spray (optional) not  
working.  
Check the continuity of master on/off switch. Replace if broken.  
Bad switch?  
If pump has a voltage present when the switch is turned on, but  
does not operate and electrical connections to the pump are  
good, replace the pump.  
Bad spray pump?  
See section on blade speed adjustment.  
Blade speed out of adjustment?  
Worn components?  
Pivots?  
Check for wear of steering bearings and linkage components  
replace if necessary.  
Steering is unresponsive.  
Check to ensure free movement of hydraulic drive motors.  
Check to ensure that hydraulic pressure is adequate. See section  
on checking hydraulic pressure.  
Hydraulic pressure?  
Seat adjust for operator?  
Crank handles?  
Operating position is  
uncomfortable.  
Adjust seat with lever located on the front of the seat.  
Make sure that both crank handles are pushed down as far as  
possible. Doing this ensures that the linkage is engaged.  
Linkage on Twin Pitch (optional)  
not working.  
Replace all broken parts immediately.  
Broken part?  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 27  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— EXPLANATION OF CODE IN REMARKS COLUMN  
The following section explains the different symbols and  
QTY. Column  
remarks used in the Parts section of this manual. Use the  
help numbers found on the back page of the manual if there  
are any questions.  
Numbers Used — Item quantity can be indicated by a  
number, a blank entry, or A/R.  
A/R (As Required) is generally used for hoses or other  
parts that are sold in bulk and cut to length.  
NOTICE  
The contents and part numbers listed in the parts  
section are subject to change without notice.Multiquip  
does not guarantee the availability of the parts listed.  
A blank entry generally indicates that the item is not sold  
separately.Other entries will be clarified in the“Remarks”  
Column.  
SAMPLE PARTS LIST  
REMARKS Column  
NO. PART NO. PART NAME  
QTY. REMARKS  
Some of the most common notes found in the “Remarks”  
Column are listed below. Other additional notes needed  
to describe the item can also be shown.  
1
12345  
BOLT......................1 .....INCLUDES ITEMS W/%  
WASHER, 1/4 IN............NOT SOLD SEPARATELY  
WASHER, 3/8 IN....1 .....MQ-45T ONLY  
HOSE ..................A/R ...MAKE LOCALLY  
BEARING ..............1 .....S/N 2345B AND ABOVE  
2%  
2% 12347  
12348  
12349  
3
Assembly/Kit — All items on the parts list with the  
same unique symbol will be included when this item is  
purchased.  
4
NO. Column  
Indicated by:  
Unique Symbols — All items with same unique  
symbol  
“INCLUDES ITEMS W/(unique symbol)”  
(@, #, +, %, or >) in the number column belong to the  
same assembly or kit, which is indicated by a note in the  
“Remarks” column.  
Serial Number Break — Used to list an effective serial  
number range where a particular part is used.  
Indicated by:  
Duplicate Item Numbers — Duplicate numbers indicate  
multiple part numbers, which are in effect for the same  
general item, such as different size saw blade guards in  
use or a part that has been updated on newer versions  
of the same machine.  
“S/N XXXXX AND BELOW”  
“S/N XXXX AND ABOVE”  
“S/N XXXX TO S/N XXX”  
Specific Model Number Use — Indicates that the part  
is used only with the specific model number or model  
number variant listed. It can also be used to show a  
part is NOT used on a specific model or model number  
variant.  
NOTICE  
When ordering a part that has more than one item  
number listed, check the remarks column for help in  
determining the proper part to order.  
Indicated by:  
“XXXXX ONLY”  
“NOT USED ON XXXX”  
PART NO. Column  
Numbers Used — Part numbers can be indicated by a  
number, a blank entry, or TBD.  
“Make/Obtain Locally” — Indicates that the part can  
be purchased at any hardware shop or made out of  
available items.Examples include battery cables, shims,  
and certain washers and nuts.  
TBD (To Be Determined) is generally used to show a  
part that has not been assigned a formal part number  
at the time of publication.  
“Not Sold Separately”— Indicates that an item cannot  
be purchased as a separate item and is either part of an  
assembly/kit that can be purchased, or is not available  
for sale through Multiquip.  
A blank entry generally indicates that the item is not sold  
separately or is not sold by Multiquip. Other entries will  
be clarified in the “Remarks” Column.  
PAGE 28 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SUGGESTED SPARE PARTS & SERVICE ITEMS  
HTH44T SERIES - KUBOTA 44 HP TURBO ENGINE  
Qty.  
P/N  
Description  
1 Unit  
1 ............ 19638.................... BRACKET BATTERY  
2 ............ 11693 .................... BOLT BATTERY BRACKET  
1 ............ 10314.................... CABLE, BATTERY+ (RED)  
1 ............ 10313.................... CABLE, BATTERY-(BLACK)  
1 ............ 1597 ..................... CABLE, (NEG 16.5")  
6 ............ 2509 ..................... WING NUT  
1 ............ 20511 .................... SWITCH, IGNITION  
1 SET .... 12627.................... KEYSET, IGNITION  
2 ............ 12307.................... BULB, INDICATOR LIGHT  
1 ............ 11585 .................... INDICATOR PLUG (BLUE)  
1 ............ 11382 .................... INDICATOR PLUG (RED)  
1 ............ 11098 .................... CIRCUIT BREAKER 40 AMP, 12V  
1 ............ 4682 ..................... TOGGLE SWITCH  
1 ............ 8381 ..................... BOOT, TOGGLE SWITCH  
1 ............ 11792 .................... ACCESSORY SOLENOID  
1 ............ 11694 .................... HOUR METER  
Qty.  
P/N  
Description  
5 ............ 2829 ................ ARMS  
2 ............ 9005 ................ LEVER TROWEL ARM (L.S.)  
20 .......... 0166A .............. WASHER  
20 .......... 1876 ................ JAM NUT  
20 .......... 0164B .............. SCREW  
5 ............ 11039 ............... BUSHING  
2 ............ 9111 ................. SPRING (L.S.)  
20 .......... 1875 ................ WASHER  
20 .......... 1322 ................ SCREW ASM, ARM RETAINING  
2 ............ 11419 ............... SPIDER PLATE (WEAR)  
20 .......... 1162A .............. CAP GREASE FITTING  
20 .......... 16602............... SCREW (HHC 3/8 -16 X 3/8)  
2 ............ 2143 ................ SPRING (R.S.)  
2 ............ 1986 ................ LEVER TROWEL ARM (R.S.)  
2 ............ 12005............... SAFETY-OFF ("KILL" SWITCH)  
20 .......... 0181B .............. WASHER 1/4 IN  
PARTS FOR KUBOTA 44 HP TURBO ENGINE  
1 ............ 11418 ............... FUEL CAP/GAUGE (ENG)  
1 ............ 12010............... FUEL SCREEN  
Qty.  
P/N  
Description  
2 ............ 19633............... BUSHING, RUBBER FUEL  
1 ............ 12332............... CAP, HYDRAULIC RESEVOIR  
1 ............ 11402 ............... FILTER, HYDRAULIC RETURN  
1 ............ 20567............... FILTER, HYDRAULIC SUCTION  
1 ............ EATON 70142-938 SEAL KIT (EATON HYD PUMP)  
1 ............ 12238............... KEY, SHAFT  
1 ............ EATON 61295.. SEAL KIT, REAR (PORT END)  
1 ............ 12313............... SEAL, INPUT SHAFT  
1 ............ EATON 61338-000 SEAL KIT, (HYD MOTOR)  
1 ............ 11874 ............... GROMMET, (HYD PUMP LEVER)  
1 ............ 20003............... ROD END, FEM (HYD PUMP LEVER)  
4 ............ 11577 ............... PLATE, VIBRATION MOUNT (ENG)  
1 ............ 11491 ............... CABLE, THROTTLE (FOOT PEDAL)  
1 ............ 11611 ............... ROD END, FEM RH (HYD THROTTLE)  
1 ............ 2153 ................ ROD END, FEM RH(THROTTLE CABLE)  
1 ............ 11643 ............... ROD END, MALE (RH)  
1 ............ 12548............... SPRAY PUMP  
1 ............ KUBOTA P/N 16271-32090 OIL FILTER  
1 ............ KUBOTA P/N 17351-11083 AIR FILTER ELEMENT  
1 ............ 70000-43081 ... FUEL FILTER  
1 ............ 16282-97010 ... FAN BELT  
2 ............ 16241-72870 ... RADIATOR HOSE  
4 ............ 36200-82720 ... HOSE CLAMP  
1 ............ 20295............... MUFFLER HTH44  
1 ............ 20122............... MUFFLER BLANKET  
1 ............ 20318............... MUFFLER KIT, KUBOTA VI505-TE  
1 ............ 10434............... CLAMP, HOSE 2"  
1 ............ 20112 ............... BRACKET, ENGINE THROTTLE CABLE  
1 ............ 10568............... THROTTLE CABLE (ENGINE)  
1 ............ 11531 ............... BELLHOUSING, KUBOTA VH 1305/150  
1 ............ 11605 ............... FLANGE, ENG KTR NYLON  
1 ............ 20316............... FAN, PUSHER, KUBOTA  
1 ............ 20320............... RADIATOR KIT, KUBOTA VI505-TE  
1 ............ 11983 ............... TANK, RADIATOR OVERFLOW  
1 ............ 20327............... AIR CLEANER KIT, KUBOTA VI505-TE  
1 ............ 20566............... HARNESS, WIRE 44HP ENGINE(HTH)  
1 ............ 20322............... HARNESS, WIRE KUBOTA 44T  
1 ............ 20321............... MANUAL, KUBOTA OWNERS, VI505-TE  
1 ............ 392292............. SPRAY NOZZEL  
1 ............ 19633............... BUSHING, RUBBER FUEL  
1 ............ 2108 ................ CAP, SPRAY TANK  
1 ............ 12009............... SCREEN FILTER  
10 .......... 10031............... WASHER, 1/4"  
NOTE  
Part numbers on this Suggested  
Spare Parts List may supercede/  
replace the P/N shown in the text  
pages of this book.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 29  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— PIVOT ASSY. (LEFT)  
PIVOT ASSY. (LEFT)  
PAGE 30 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— PIVOT ASSY. (LEFT)  
PIVOT ASSY. (LEFT)  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
12968  
11499  
10221  
11555  
0166A  
1023  
0183  
11648  
0448  
PART NAME  
MOUNT, HYD. MOTOR LEFT  
YOKE  
BUSHING  
ROCKER BLOCK  
WASHER, LOCK 3/8 MED.  
SCREW, HHC 3/8- 16 X 1- 1/4  
PIN,COTTER 1/8 1- 1/4  
PIN, PIVOT  
QTY.  
REMARKS  
1
1
2
2
4
4
2
1
2
9
WASHER, FLAT 7/16 SAE  
10  
11  
12  
13  
14  
15  
16  
17  
12983  
3214  
MOUNT, HYD. MOTOR BOTTOM ........................ 1 ...............DOES NOT INCL ITEM 2, YOKE  
SCREW, HHC 1/2- 13 X 1- 1/4  
SCREW, HHC 1/2- 13 X 2 1/4  
SCREW, FHSC 1/2- 13 X 2 1/4  
NUT, NYLOC 1/2- 13  
4
2
2
8
1
13178  
11882  
10176  
20002  
11772  
11773  
MOTOR, EATON VIS30 24CID  
SHIM .................................................................. AR  
SHIM .................................................................. AR  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 31  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— PIVOT ASSY. (RIGHT)  
PIVOT ASSY. (RIGHT)  
PAGE 32 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— PIVOT ASSY. (RIGHT)  
PIVOT ASSY. (RIGHT)  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
12967  
11450  
10221  
11555  
0166A  
1023  
0183  
11648  
0448  
PART NAME  
MOUNT, HYD. MOTOR RIGHT  
TRUNNION  
BUSHING  
ROCKER BLOCK  
WASHER, LOCK 3/8 MED.  
SCREW, HHC 3/8- 16 X 1- 1/4  
PIN, COTTER 1/8 1- 1/4  
PIN, PIVOT  
QTY.  
REMARKS  
1
1
4
2
6
6
2
1
2
9
WASHER, FLAT 7/16 SAE  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
12983  
3214  
MOUNT, HYD. MOTOR BOTTOM ........................ 1 ...............DOES NOT INCLUDE ITEM 14  
SCREW, HHC 1/2- 13 X 1- 1/4  
SCREW, HHC 1/2- 13 X 2 1/4  
SCREW, FHSC 1/2- 13 X 2 1/4  
YOKE  
NUT, NYLOC 1/2- 13  
RETAINER, CLUTCH  
SCREW, SHS 1/4- 20 X 1/2, N.P.  
SHAFT, PIVOT  
MOTOR, EATON VIS30 24CID  
4
2
2
1
8
2
1
1
1
13178  
11882  
11499  
10176  
11154  
10138  
11420  
20002  
11772  
11773  
SHIM .................................................................. AR  
SHIM .................................................................. AR  
20 11772  
21 11773  
SHIM  
SHIM  
(USE AS REQUIRED)  
(USE AS REQUIRED)  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 33  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TWIN PITCH ASSY. (LEFT/RIGHT)  
LEFT/RIGHT TWIN PITCH ASSY.  
PAGE 34 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TWIN PITCH ASSY. (LEFT/RIGHT)  
LEFT/RIGHT TWIN PITCH ASSY.  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 35  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TWIN PITCH ASSY. (LEFT/RIGHT)  
LEFT/RIGHT TWIN PITCH ASSY.  
NO  
1+%  
2+%  
PART NO  
0126 B  
PART NAME  
QTY.  
1
3
1
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
6
1
1
1
1
3
1
1
4
1
1
REMARKS  
KEY, WOODRUFF #9  
0161C  
WASHER, LOCK 5/16 MED  
WASHER, LOCK, 1/4 MED  
SCREW, HHC 5/16 – 18 X 3/4  
SCREW, SHS 5/16 – 18 X 5/16  
WASHER, FLAT, 1/4 SAE  
BOLT, SHOULDER, 3/8 X 3/8 LONG  
SHAFT, PITCH CONTROL, LH TPC  
RING, SNAP, TRUARC 5160 – 75  
HOUSING, PITCH CONTROL, 1-3/4  
SLIDE BLOCK, LH PITCH CON  
PIN, SPIROL 3/16 X 1 3/8 HD  
NUT, BRASS JAM 5/16 – 18  
U-JOINT, PITCH CONTROL  
CAP, GREASE ZERK, #2 YELLOW  
CABLE, PITCH ASM  
TUBE, PITCH CONTROL  
SPACER, PITCH SPRING  
SHAFT, TWIN PITCH  
PIN, ROLL 1/8 Z 1 PLATED  
GEAR, MASTER, TPC  
GEAR, SLAVE, TPC  
KEY, WOODRUFF, #3  
SCREW, HHC 1/4 – 20 X 1/2  
PIN, ROLL 1/8 X 3/4  
BEARING, BALL  
3 +% 0181 B  
*
4+%  
5+%  
6+%  
7+%  
8+  
0655  
0685  
0948  
10382  
10511  
10512  
9+%  
10+% 10546  
11+  
10722  
12+% 10723  
13+% 1116  
14 +% 11583  
*
15 +% 1162 A  
*
16+% 11623  
17  
18  
11630  
11649  
19+% 11652  
20 +% 11654  
*
22+% 1529  
23+% 1530  
24 +% 1578  
*
25+% 1579  
26+% 1586  
27+% 1604  
28+% 1612  
BEARING, ALUM – PITCH CONTR  
WASHER, 1/32 X 1/2 HARDENED  
SHAFT  
SLEEVE, ADJ – LONG, RIDER  
SPRING, COIL  
29 +% 1733  
*
30+% 2007  
31  
32  
2012  
2156  
33+% 2169  
34+% 2170  
35+% 2311  
36+% 2367  
37+% 2620  
BEARING, THRUST, TORR #NTA 1220  
BEARING, RACE, TORR #TRA 1220  
SPACER, 3/4 X 1/2 X 8L  
SET COLLAR  
SCREW, BHC 10 – 24 X 5/8  
ZERK, GREASE STR 1/4 – 28  
COVER, PITCH CONT HOUSING  
38 +% 2621  
*
40+% 2649  
PAGE 36 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TWIN PITCH ASSY. (LEFT/RIGHT)  
LEFT/RIGHT TWIN PITCH ASSY.  
NO  
41  
42  
PART NO  
0202  
0300 B  
0730  
11653  
1577  
1987  
1988  
2021  
2022  
2062  
2845  
4514  
5283  
11650  
11651  
11655  
1617  
2300  
2332  
4014  
4403  
3231  
1615  
1733  
1616  
0185  
1528  
10510  
10721  
2737  
PART NAME  
QTY.  
8
8
REMARKS  
SCREW, HHC 5/16 – 18 X 1  
WASHER, FLAT, 5/16 SAE  
SCREW, HHC 1/4 – 20 X 1  
SLEEVE, W/U-JOINT  
43  
16  
1
*
44  
*
45  
*
SET COLLAR, 1/2  
4
46  
*
MITER BOX, PITCH CONTROL  
MIT BOX, BEARING CAP RIDERS  
SHAFT, MITER VERT JRT  
SHAFT, MITER VERTICAL  
GEAR, MITER, TPC  
2
47  
*
4
48  
*
2
49  
*
3
50  
*
4
51  
*
SHAFT, MITER BOX HORIZ  
SCREW, HHC 1/4 – 20 X 5/8  
NUT, NYLOC 5/16 – 18  
RIGHT SIDE TWIN PITCH CONT ASSY............ 1 .......... INCLS ITEM W/%  
LEFT SIDE TWIN PITCH TOWER ASSY ........... 1 .......... INCLS ITEM W/+  
MITER BOX ASSY .............................................1 .......... INCLS ITEM W/  
LEVER ASSY, TROWEL ADJUSTMENT ............ 2 .......... INCLS ITEM W/#  
1
52  
*
4
53  
8
54  
55  
*
56  
*
57  
58#  
59#  
60#  
61#  
62#  
63#  
64#  
65#  
66#  
67#  
68%  
69%  
70  
DECAL, AL PITCH, RH  
DECAL, AL PITCH, LH  
SCREW, 2-3/16 P-K TYPE U DRIVE  
CRANK KNOB  
1
1
4
1
1
1
1
1
1
1
1
1
1
SPACER  
CRANK LEVER  
HARDEN WASHER  
SHOULDER BOLT  
SCREW, SHSS 3/8 – 16 X 3/8"  
SCREW, SHSS 1/4 – 20 X 5/16"  
SHAFT, PITCH CONTROL, RH TPC  
SLIDE BLOCK, RH PITCH CONTROL  
KNOB KIT  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 37  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— ENGINE (KUBOTA)  
ENGINE (KUBOTA  
PAGE 38 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— ENGINE (KUBOTA)  
ENGINE (KUBOTA)  
NO.  
1
2
PART NO.  
5218  
5054A  
4014  
PART NAME  
QTY.  
REMARKS  
SCREW, HHC 1/2- 13 X 1- 1/2  
WASHER, LOCK, 1/2 MED  
SCREW, DRIVE #2- 3/16 U- DRIVE  
6
6
2
4
5
11517  
MOUNT, RIGHT MOTOR ...................................... 1 ...............(REPLACE S/N TAG ONTO  
.................................................................................................NEW MOUNT)  
6
7
8
9
20295  
10434  
20123  
20091  
2198  
0948  
60049  
20093  
20108  
12958  
6869  
0166A  
11577  
20112  
8125  
2955  
0202  
11662  
10136  
0300B  
5283  
8128  
20122  
17351-11083  
16271-32090  
16241-72870  
36200-82720  
20320  
15263-12370  
16282-97010  
16285-52032  
16241-64010  
37560-63010  
01123-50830  
1629611013  
MUFFLER, HTH44  
1
2
1
1
3
3
CLAMP, HOSE 2 INCH ID  
HOSE, AIR CLEANER  
PLATE, AIR DAM TOP  
SCREW, SHC M6- 1.0 X 10MM  
WASHER, FLAT 1/4 SAE  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29%  
30  
31  
32  
33  
35  
36  
37  
38  
39  
40  
41  
TRIM EDGE, 1/32 (62B3- 1/32) ............................ 1 ...............SOLD IN FOOT-LENGTHS  
PLATE, AIR DAM REAR  
ENGINE PACKAGE KUBOTA 44HP TURBO  
MOUNT, ENGINE LEFT W/ A  
SCREW, HHC 3/8- 24 X 1/2  
WASHER, LOCK 3/8 MED.  
PLATE, VIBRATION MOUNT  
BRACKET, THROTTLE  
CLAMP, HOSE SUPPORT, 5/8  
WASHER,LOCK, 7/16 MED  
SCREW, HHC 5/16- 18 X 1  
SCREW, HHC M10- 1.25 X 25MM  
WASHER, FLAT 3/8 SAE  
WASHER, FLAT 5/16 SAE  
NUT, NYLOC 5/16-18  
CLAMP, HOSE SUPPORT 5/16  
BLANKET, MUFFLER  
ELEMENT, AIR CLEANER  
OIL FILTER, ENGINE  
HOSE, RADIATOR  
CLAMP, RADIATOR  
1
1
2
8
8
4
1
1
4
1
5
1
1
1
1
1
1
1
2
4
1
1
1
1
1
1
2
RADIATOR KIT  
GASKET, MUFFLER  
FAN BELT  
FUEL PUMP, KUBOTA  
ALTERNATOR  
STARTER  
BOLT, STARTER  
AIR CLEANER ASSY ........................................... 1 ...............INCLUDES ITEMS W/%  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 39  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— ENGINE FLANGE (KUBOTA)  
ENGINE (KUBOTA)  
PAGE 40 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— ENGINE FLANGE (KUBOTA)  
ENGINE (KUBOTA)  
NO.  
1
2
3
4
PART NO.  
5218  
5054A  
N/A  
PART NAME  
SCREW, HHC 1/2- 13 X 1- 1/2  
WASHER, LOCK, 1/2 MED  
SCREW, HHC M10 -1.25 X 35MM GRD10.9........ 2 ...............SOURCE LOCALLY  
WASHER, FLAT 10MM ......................................... 2 ...............SOURCE LOCALLY  
QTY.  
2
2
REMARKS  
N/A  
7
8
9
11605  
N/A  
11531  
N/A  
N/A  
N/A  
11378  
10136  
0166A  
1284  
11517  
N/A  
FLANGE, NYLON  
SCREW, SHC M10 -1.25 X 30MM GRD12.9 ........ 3 ...............SOURCE LOCALLY  
BELL HOUSING, KTR  
WASHER, FLAT 8MM ........................................... 4 ...............SOURCE LOCALLY  
SCREW, SHC M8 -1.25 X 30MM GRD12.9 .......... 4 ...............SOURCE LOCALLY  
SCREW, SHC M10-1.5 X 30MM GRD12.9 ........... 1 ...............SOURCE LOCALLY  
1
1
10  
11  
12  
13  
15  
16  
17  
18  
19  
HUB, HYDRAULIC PUMP  
WASHER, FLAT 3/8 SAE  
WASHER, LOCK 3/8 MED  
SCREW, HHC 3/8-16 X 1- 1/2  
MOUNT, RIGHT MOTOR  
1
2
2
2
1
NUT, HEX, M8 - 1.25 ............................................ 1 ...............SOURCE LOCALLY  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 41  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— ENGINE FUEL (KUBOTA)  
ENGINE FUEL(KUBOTA)  
PAGE 42 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— ENGINE FUEL (KUBOTA)  
ENGINE FUEL(KUBOTA)  
NO.  
1
2
3
4
PART NO.  
60028  
60004  
60028  
60028  
PART NAME  
QTY.  
REMARKS  
HOSE, .312 ID RUBBER FUEL 14" ..................... 1 ...............SOLD IN FOOT-LENGTHS  
HOSE, .187 ID RUBBER FUEL 30" ..................... 1 ...............SOLD IN FOOT-LENGTHS  
HOSE, .312 ID RUBBER FUEL 17" ..................... 1 ...............SOLD IN FOOT-LENGTHS  
HOSE, .312 ID RUBBER FUEL 25" ..................... 1 ...............SOLD IN FOOT-LENGTHS  
5
6
7
8
19473  
70000-43081  
11662  
CLAMP, WORM HOSE, #4 (1/4- 5/8)  
FILTER, CANNISTER FUEL  
SCREW, HHC M10- 1.25 X 25MM  
WASHER, LOCK, 7/16 MED  
6
1
2
2
2955  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 43  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC STEERING (LEFT)  
HYDRAULIC STEERING (LEFT)  
PAGE 44 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC STEERING (LEFT)  
HYDRAULIC STEERING (LEFT)  
1
2
20095  
20096  
11142  
11146  
12038  
12060  
12056  
11141  
12318  
10176  
11725  
12156  
TUBE, HYD. STEERING PRESSURE  
1
1
2
2
1
1
TUBE, HYD. STEERING RETURN  
ROD END, 1/2- 20 MALE RH  
NUT, HEX JAM 1/2- 20  
BELLOWS, STG. CYLINDER  
PLATE, BELLOWS MOUNTING  
CYLINDER, STEERING ....................................... 1 ...............INCL ITEMS W/ #  
SPACER, ROD END  
SCREW, HHC 1/2- 13 X 2 3/4  
NUT, NYLOC 1/2- 13  
FITTING, STEERING 6MJ- 1/4MP  
3*  
4*  
5*#  
6*#  
7*  
8
4
2
2
2
9
10  
11  
12  
CYLINDER ASM, STEERING ............................... 1 ...............INCLUDES ITEMS W/ * AND  
................................................................................................. INSTRUCTION SHEET  
13*# 10229  
14*# 0161C  
15*# 0300B  
SCREW, HHC 5/16- 20 X 1  
4
4
4
2
WASHER, LOCK 5/16 MED  
WASHER, FLAT 5/16 SAE  
16  
11696  
HOSE ASM, .38 ID X 35.5 STR.ENDS  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 45  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC STEERING (RIGHT)  
HYDRAULIC STEERING (RIGHT)  
PAGE 46 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC STEERING (RIGHT)  
HYDRAULIC STEERING (RIGHT)  
1
2
3
4
5
7
8
9
20095  
20084  
12213  
11949  
12055  
20085  
20096  
12079  
12056  
TUBE, HYD. STEERING PRESSURE  
1
1
1
1
2
1
1
2
TUBE, HYD. STRG. CYC. ROD END HTH- T  
HOSE ASM, .38 ID X 24 90 ONE END  
HOSE ASM, 3/8 ID X 23 06 STR. ENDS  
HOSE ASM, .38 ID X 36 45 ONE END  
TUBE, HYD. STRG. CYL. BASE END HTH- T  
TUBE, HYD. STEERING RETURN  
HOSE ASM, .38 ID X 17 STR ENDS  
CYLINDER, STEERING ....................................... 2 ...............INCL ITEMS W/ #  
11*  
12*# 12038  
13*# 12060  
14*# 0300B  
15*# 0161C  
16*# 10229  
BELLOWS, STG. CYLINDER  
PLATE, BELLOWS MOUNTING  
WASHER, FLAT 5/16 SAE  
WASHER, LOCK 5/16 MED  
SCREW, HHC 5/16- 20 X 1  
SCREW, HHC 1/2- 13 X 2 3/4  
SPACER, ROD END  
NUT, NYLOC 1/2- 13  
ROD END, 1/2- 20 MALE RH  
NUT, HEX JAM 1/2- 20  
SCREW, HHC 1/2- 13 X 2 1/4  
FITTING, STEERING 6MJ- 1/4MP  
FITTING, 45 6MJ- 6MO  
CYLINDER ASM, STEERING ............................... 1 ...............INCLUDES ITEMS W/ * AND  
................................................................................................. INSTRUCTION SHEET  
2
2
8
8
8
3
8
4
4
4
1
4
1
17  
18  
19  
20*  
21*  
22  
23  
24  
25  
12318  
11141  
10176  
11142  
11146  
13178  
11725  
12409  
12156  
26  
27  
28  
29  
30  
31  
32  
20143  
11698  
16334  
16333  
12275  
12274  
12273  
VALVE ASM, STEERING REGULATOR  
HOSE ASM, .38 ID X 15.5 STR. ENDS  
NUT, HEX JAM BLKHD .5625-18UNF  
FITTING, STR 6MJ BLKHD UNION  
SCREW, CLAMP STAUFF ASDS1  
COVER, CLAMP STAUFF USDS1  
CLAMP, 3/8 TUBE PLASTIC PAIR  
1
1
2
2
1
1
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 47  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— STEERINGVALVE ASSY. (LEFT)  
STEERING VALVE ASSEMBLY (LEFT)  
PAGE 48 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— STEERINGVALVE ASSY. (LEFT)  
STEERING VALVE ASSEMBLY (LEFT)  
NO.  
1*  
2*  
3*  
6*  
7*  
8*  
9*  
10*  
11*  
12*  
13*  
14  
PART NO.  
HU51494  
HU51941  
HU51770  
12519  
HU51774  
HU51773-1  
HU51775  
12536  
PART NAME  
QTY.  
REMARKS  
NUT, SPECIAL  
1
1
3
1
1
1
1
2
1
2
2
PLATE, PIVOT  
RETAINING RING, - EXT  
BOOT, LEFT  
PIVOT PIN  
CLAMP, BOOT  
SCREW, CAP, FLAT HD  
GASKET  
SCREW, CAP, FLAT HD  
SPRING  
HU51761  
HU53748  
12523  
PLUNGER CAPSULE ASM  
VALVE ASM, HTH44T STRG LEFT ...................... 1 ...............INCLUDES ITEMS WITH *  
11423  
15*  
16  
17  
18  
19  
20  
21*  
22*  
23*  
24*  
12521  
11722  
11721  
12147  
12148  
11723  
HU3182  
HU53-906  
HU3108  
HU53-908  
METERING CAPSULE ASM  
FITTING, 90 6MJ-6MO  
FITTING, STR 6MJ-6MO  
FITTING, QC DIAGN PARKER PD-361  
CAP, DUST DIAG PARKER PD6-285  
FITTING, 90 6MJ-8MO  
PLUG, SAE  
O-RING  
PLUG, SAE  
O-RING  
2
1
2
1
1
1
1
1
1
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 49  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEERING VALVE ASSEMBLY (RIGHT)  
PAGE 50 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— STEERING VALVE ASSY. (RIGHT)  
STEERING VALVE ASSEMBLY (RIGHT)  
NO.  
1*  
2*  
4*  
7*  
8*  
9*  
10*  
11*  
12  
13*  
14  
15  
16  
PART NO.  
HU51494  
12518  
HU515026  
12790  
12524  
11146  
HU53748  
12523  
11422  
12521  
11780  
12159  
11721  
PART NAME  
NUT, SPECIAL  
BOOT, RIGHT  
PLATE, PIVOT  
QTY.  
REMARKS  
1
1
1
1
4
1
6
6
RETAINER, STRG VALVE BOOT  
GASKET  
NUT, HEX JAM 1/2- 20  
SPRING  
PLUNGER CAPSULE ASM  
VALVE ASM, HTH44T STRG RIGHT ................... 1 ...............INCLUDES ITEMS WITH *  
METERING CAPSULE ASM  
FITTING, 45 6MJ-6MO  
FITTING, TEE 6MJ-6MO-6MJ  
FITTING, STR 6MJ-6MO  
6
1
2
3
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 51  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— PALM HANDLES (LEFT AND RIGHT)  
PALM HANDLES (LEFT AND RIGHT)  
PAGE 52 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— PALM HANDLES (LEFT AND RIGHT)  
PALM HANDLES (LEFT AND RIGHT)  
NO.  
1
2
3
4
5
6
7
PART NO.  
22001  
22003  
11146  
11423  
22002  
22004  
11422  
20314  
1318  
PART NAME  
HANDLE, PALM W/ SWITCH, LEFT  
TUBE, HANDLE SWITCH  
QTY.  
REMARKS  
1
1
2
1
1
1
1
1
1
1
NUT, HEX JAM 1/2 - 20  
VALVE ASM, STEERING (LEFT)  
HANDLE, PALM W/O SWITCH, RIGHT  
TUBE, HANDLE SOLID  
VALVE ASM, STEERING (RIGHT)  
SWITCH ASM  
TERMINAL, BULLET, FEMALE 18-22  
TERMINAL, BULLET, MALE 14-16  
10  
11  
12  
4692  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 53  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC DRIVE ASSEMBLY  
HYDRAULIC DRIVE ASSEMBLY  
PAGE 54 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC DRIVE ASSEMBLY  
HYDRAULIC DRIVE ASSEMBLY  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
11723  
11892  
12804  
12433  
12147  
12148  
11590  
11386  
11721  
11698  
20191  
20190  
11588  
8125  
PART NAME  
QTY.  
1
1
1
2
2
2
1
6
3
1
1
1
1
1
1
1
REMARKS  
FITTING, 90 6MJ- 6MO  
FITTING, 90 IMP- 3/4FP SWIVEL  
PUMP ASM,TANDEM HTH  
FITING,TEE 12MJ- 12MO- 6FO  
FITTING, QC DIAGN PARKER PD- 361  
CAP, DUST DIAG PARKER PD6- 285  
HOSE ASM, .75ID X 24 90 DEG. ENDS  
FITTING, STR. 12MJ- 12MO  
9
FITTING, STR. 6MJ- 6MO  
10  
11  
13  
14  
15  
16  
17  
18  
19  
21  
HOSE ASM, .38ID X 15.5 STR. ENDS  
HOSE ASM, .51ID X 14LG 90 DEG. ONE END  
FITTING, CROSS 6MJ- 8MJ- 6MJ- 8MJ  
HOSE ASM, .75ID X 27 90 DEG. ONE END  
CLAMP, HOSE SUPPORT 5/8  
WASHER, FLAT 5/16 SAE  
0300B  
5283  
11699  
11591  
11589  
NUT, NYLOC 5/16- 18  
HOSE ASM, .38ID X 52.5 STR. ENDS  
HOSE ASM, .75ID X 41 90 DEG. ENDS  
HOSE ASM, .75ID X 50 90 DEG. ONE END  
1
1
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 55  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC DRIVE PUMP LEVER ASSY.  
HYDRAULIC DRIVE PUMP LEVER ASSEMBLY  
1
5
14  
4
3
2
6
10  
1
9
8
5
7
4
3
12  
11  
13  
12  
SPEED CONTROL CABLE ASSY,  
SEE PAGE 78.  
1
PAGE 56 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC DRIVE PUMP LEVER ASSY.  
HYDRAULIC DRIVE PUMP LEVER ASSEMBLY  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
0424  
PART NAME  
QTY.  
1
1
2
2
2
1
1
1
REMARKS  
SCREW, HHC 1/4- 20 X 1 1/4  
CLEVIS, PUMP ACTUATOR, LEFT HAND  
SPACER, PUMP LEVER GROMMET  
GROMMET, LEVERMINOR #Z- 2064  
NUT, NYLOC 1/4- 20  
12357  
11875  
11874  
10024  
11613  
11610  
6904  
NUT, HEX FULL 1/4- 28 LEFT HAND  
ROD, PUMP ACTUATOR  
NUT, HEX FINISH 1/4- 28  
9
0948  
WASHER, FLAT 1/4 SAE  
1
1
1
2
10  
11  
12  
13  
14  
20003  
12356  
12580  
26250  
21449  
ROD END, 1/4 - 28 FEM RH W/ZERK  
CLEVIS, PUMP ACTUATOR, RT. HAND  
LEVER, PUMP TL SPEN SP791- 11  
SCREW, HHC 1/4- 20 X 1- 3/4  
1
KIT, PUMP LEVER CLEVIS ................................. 1 ...............REPLACES 12593  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 57  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC DRIVE FILTERS AND COOLING  
HYDRAULIC DRIVE FILTERS AND COOLING  
PAGE 58 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— HYDRAULIC DRIVE FILTERS AND COOLING  
HYDRAULIC DRIVE FILTERS AND COOLING  
NO.  
1
2
PART NO.  
12575  
3333  
PART NAME  
FITTING, 45 8 BARB X 3/8 MP  
CLAMP, 1.1/4 HOSE  
QTY.  
1
4
REMARKS  
3
4
5
6
7
8
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
20251  
12537  
11580  
12114  
11579  
11297  
11783  
0300B  
5283  
20237  
20238  
20567  
11883  
11893  
11892  
3367  
HOSE, .5ID 100R3 21 LONG  
FITTING, 45 8BARB X 1/2 MP  
FAN, COOLING BLADE  
SHROUD, OIL COOLING FAN  
MOTOR, 12 VOLT FAN  
COOLER, OIL  
BOLT, CARRIAGE 5/16- 18 X 3  
WASHER, FLAT 5/16 SAE  
1
1
2
1
2
1
4
4
4
1
1
1
1
1
1
1
NUT, NYLOC 5/16- 18  
FITTING,TEE 08MJ X 08MJ X .5MP  
HOSE ASM, .51ID X 16.5 STR. ENDS  
ELEMENT, FILTER SUC. STAUFF SF6710  
HOUSING, FILTER SUC. ZINGA SF- 100  
FITTING, NIPPLE IMP CLOSE  
FITTING, 90 IMP- 3/4FP SWIVEL  
FITTING, 12 BARB- 3/4MP  
HOSE ASM, .75ID 100R4 16.5 LONG  
3462  
1
11870  
11396  
11402  
FITTING, 90 12 BARB- 8MO ................................ 1 ...............CHARGE PUMP INLET  
FITTING, 8MJ X 8MO  
FILTER .................................................................. 1 ...............STAUFF SF-6520, ZINGA AE-10  
1
.................................................................................................OR EQUIVALENT  
24  
25  
26  
27  
28  
11754  
11749  
12176  
12179  
12171  
HOUSING, FILTER  
1
1
1
2
2
FITTING, STR. 8MJ- 8MO  
CONNECTOR, WEATHERPACK 2 PIN  
TERMINAL, W'PACK MALE 14-16 GA  
SEAL, WEATHERPACK 16-18 GA  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 59  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FIVE BLADE SPIDER ASSY. (LEFT)  
FIVE BLADE SPIDER ASSEMBLY (LEFT SIDE)  
PAGE 60 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FIVE BLADE SPIDER ASSY. (LEFT)  
FIVE BLADE SPIDER ASSEMBLY (LEFT SIDE)  
NO.  
1
2
PART NO.  
11419  
20426  
PART NAME  
QTY.  
REMARKS  
PLATE, WEAR  
1
BUSHING, THRUST MACHINED ......................... 1 ...............ORIENT HOLE WITH GREASE  
.................................................................................................HOLE IN THRUST COLLAR  
3
4
5
6
7
8
9
1162A  
2621  
11431  
12779  
20180  
2829  
9005  
9006  
0166A  
1876  
0164B  
9111  
CAP, GREASE ZERK #2  
1
1
1
1
1
5
5
5
5
5
5
5
10  
5
5
5
ZERK, GREASE STR 1/4- 28  
THRUST COLLAR W/ BUSHING  
BEARING,THRUST 6017 2RS W/FLANGE  
SPIDER ASM,LEFT SIDE  
ARM, TROWEL, HD EXTENDED  
LEVER, TROWEL ARM LEFT SIDE  
PIN, ROLL 5/16 X 2  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
WASHER, LOCK, 3/8 MED  
NUT, HEX JAM 3/8 X 16 CLASS 2B  
SCREW, TROWEL ADJUSTMENT  
SPRING, LS ARM RETURN HD/HT, SM BOSS  
BUSHING, ARM 2 PIECE  
WASHER, INT. SHKP. 3/8  
CAP, GREASE ZERK #2  
SCREW ASM, ARM RETAINING  
CAP PLUG ............................................................ 5 ...............REPLACES P/N 11602  
SPIDER, HTH TAPER 5 BL  
RETAINER, SPIDER  
WASHER,LOCK 3/4 MED  
PLUG, SPIDER SNAP IN  
SCREW, HHC 3/4- 16 X 2, GR8  
SCREW, HHC 5/16 -18 X 1 1/2  
WASHER, LOCK 5/16  
11039  
1875  
1162A  
1322  
2218  
20041  
20073  
4388  
20121  
20179  
0105  
1
1
1
1
1
15  
15  
1
0161C  
0121A  
FITTING, PLUG 3/8MP SQ HEAD  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 61  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FIVE BLADE SPIDER ASSY. (RIGHT)  
FIVE BLADE SPIDER ASSEMBLY (RIGHT SIDE)  
PAGE 62 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FIVE BLADE SPIDER ASSY. (RIGHT)  
FIVE BLADE SPIDER ASSEMBLY (RIGHT SIDE)  
NO.  
1
2
PART NO.  
11419  
11464  
PART NAME  
QTY.  
REMARKS  
PLATE, WEAR  
1
BUSHING, THRUST MACHINED ......................... 1 ...............ORIENT HOLE WITH GREASE  
.................................................................................................HOLE IN THRUST COLLAR  
3
4
5
6
7
8
9
1162A  
2621  
11431  
12779  
20181  
2829  
1986  
9006  
0166A  
1876  
0164B  
2143  
11039  
1875  
1162A  
1322  
CAP, GREASE ZERK #2  
1
1
1
1
1
5
5
5
ZERK, GREASE STR 1/4- 28  
THRUST COLLAR, W/ BUSHING  
BEARING, THRUST 6017 2RS W/FLANGE  
SPIDER ASM, RIGHT SIDE  
ARM, TROWEL, HD EXTENDED  
LEVER, TROWEL ARM RIGHT SIDE  
PIN, ROLL 5/16 X 2  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
WASHER, LOCK, 3/8 MED  
5
5
5
5
NUT, HEX JAM 3/8 X 16 CLASS 2B  
SCREW, TROWEL ADJUSTMENT  
SPRING, RIGHT TROWEL  
BUSHING, ARM 2 PIECE  
WASHER, INT. SHKP. 3/8  
10  
5
CAP, GREASE ZERK #2  
SCREW ASM, ARM RETAINING  
5
5
2218  
CAP PLUG ............................................................ 5 ...............REPLACES P/N 11602  
20041  
20073  
4388  
20121  
20179  
0105  
SPIDER, HTH TAPER 5 BL  
RETAINER, SPIDER  
WASHER, LOCK 3/4 MED  
PLUG, SPIDER, SNAP IN  
SCREW,HHC 3/4- 16 X 2, GR8  
SCREW, HHC 5/16 -18 X 1 1/2  
WASHER, LOCK 5/16  
1
1
1
1
1
15  
15  
1
0161C  
0121A  
FITTING, PLUG 3/8MP SQ HEAD  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 63  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— STABILIZER RING ASSY.  
STABILIZER ASSEMBLY  
PAGE 64 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— STABILIZER RING ASSY.  
STABILIZER ASSEMBLY  
NO.  
1
2
3
4
PART NO.  
12095  
6014C  
0161C  
1723  
PART NAME  
QTY.  
1
10  
10  
5
REMARKS  
RING, STABILIZER, EXT ARM, HD  
NUT, HEX FINISH 5/16-24  
WASHER, LOCK, 5/16 MED  
ROD END, 5/16-24 MALE  
SCREW, SCH 5/16-18 X 7/8  
5
1237  
5
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 65  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— LOCATOR DECALS  
LOCATOR DECALS  
PAGE 66 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— LOCATOR DECALS  
LOCATOR DECALS  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
11246  
11712  
20486  
11711  
11247  
20196  
20207  
11811  
20209  
2814  
20200  
13118  
10818  
10024  
12288  
12401  
1499  
PART NAME  
QTY.  
REMARKS  
DECAL, INTL STDS, ISO ..................................... 1 ...............SEE DECAL SHEET PAGE 66  
DECAL, ENGINE SPEED  
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
1
1
2
DECAL, HYD RIDER COLD START  
DECAL, INSTRUMENT LIGHT  
DECAL, SAFETY CLOTHING, ISO  
DECAL, "MQ" 6.22 X 5.00  
DECAL, “TURBOCHARGED” 0.80 X 9.00  
DECAL, DIESEL FUEL  
DECAL, “HYDROSTATIC” 16.00 X 1.73  
DECAL, KEY SWITCH LIGHTS  
DECAL, “HTH SERIES” 5.00 X 3.30  
DECAL, POWDER COATED  
DECAL, “MQ WHITEMAN” 24 X 3  
NUT, NYLOC 1/4- 20  
SCREW, THP 1/4- 20 X 1 SS  
DECAL, PRESSURIZED TANK CAUTION  
DECAL, "MQ WHITEMAN"  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
2300  
2332  
2634  
DECAL, AL PITCH RH  
DECAL, AL PITCH LH  
DECAL, SPRING SAFETY  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 67  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TOP PANEL (LEFT) ASSY.  
TOP PANEL (LEFT)  
PAGE 68 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TOP PANEL (LEFT) ASSY.  
TOP PANEL (LEFT)  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
20022  
20047  
20032  
20063  
20104  
60049  
12287  
11534  
12288  
10024  
0948  
PART NAME  
PANEL, LEFT FRONT  
PANEL, LEFT BACK  
QTY.  
1
1
1
1
1
4
12  
12  
6
REMARKS  
SEAT FRAME  
PANEL, SEAT FRAME TOP LEFT  
COVER, OIL COOLER  
TRIM EDGE, 1/32 (62B3- 1732)  
SCREW, THP1/4- 20 X 3/4 SS  
NUT, U- TYPE 1/4- 20  
SCREW, THP 1/4- 20 X 1 SS  
NUT, NYLOC 1/4- 20  
WASHER, FLAT 1/4 SAE  
TANK, OVERFLOW (RADIATOR) ........................ 1 ...............INCLUDES BOTTLE, BRACKET  
.................................................................................................AND HOSES  
9
10  
11  
12  
5
5
11983  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 69  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TOP PANEL (RIGHT) ASSY.  
TOP PANEL (RIGHT)  
PAGE 70 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—TOP PANEL (RIGHT) ASSY.  
TOP PANEL (RIGHT)  
NO.  
1
2
3
5
6
7
8
9
PART NO.  
12287  
12288  
0948  
0181B  
11694  
3513  
PART NAME  
QTY.  
16  
6
6
1
1
1
1
1
REMARKS  
SCREW, THP1/4- 20 X 3/4 SS  
SCREW, THP 1/4- 20 X 1 SS  
WASHER, FLAT 1/4 SAE  
WASHER, LOCK 1/4 MED  
HOUR METER  
SCREW, HHC 10- 32 X 1  
ROD END,10- 32 FEMALE RH.  
NUT, HEX #10- 32  
2153  
0937  
10  
11  
12  
13  
14  
15  
18  
19  
20  
21  
22  
23  
24  
26  
27  
28  
10568  
10019  
10024  
11379  
29057  
20021  
11534  
0169  
CABLE, THROTTLE, HONDA RIDER  
NUT, NYLOC 10- 32  
NUT, NYLOC 1/4- 20  
LEVER, ENGINE SPEED CONTROL  
DOCUMENT BOX, (CP90007- 07)  
PANEL, RIGHT BACK  
1
2
6
1
1
1
8
1
1
1
2
1
1
1
1
1
NUT, U- TYPE 1/4- 20  
SCREW, HHC 3/8- 16 X 3.0 LG  
WASHER, FLAT 3/8 USS PLD  
SPRING, SEAT (CENTURY #10321)  
WASHER, STEERING HANDLE  
NUT, NYLOC 3/8- 16  
SWITCH, KILL COLE-HER #90036-2  
PLUG, OIL, WATER, CHARGE (RED)  
BULB, INDICATOR LIGHT  
PLUG, PREHEAT LIGHT (BLUE)  
4001  
11593  
11265  
10133  
12005  
11382  
12307  
11585  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 71  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FRONT PANEL (RIGHT) ASSY.  
FRONT PANEL (RIGHT)  
PAGE 72 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FRONT PANEL (RIGHT) ASSY.  
FRONT PANEL (RIGHT)  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
20034  
12287  
0948  
5065B  
2203  
8381  
10568  
4682  
20511  
12627  
10019  
11098  
10024  
11792  
PART NAME  
PANEL, RIGHT FRONT  
QTY.  
1
2
2
2
2
1
1
1
1
1
2
1
2
1
REMARKS  
SCREW,THP 1/4- 20 X 3/4 SS  
WASHER, FLAT 1/4 SAE  
SCREW, RHM 10- 32 X 1/2  
WASHER, FLAT #10 SAE  
BOOT, TOGGLE SWITCH  
CABLE, THROTTLE, HONDA RIDER  
SWITCH, TOGGLE ELEC. #9061  
SWITCH, IGNITION (W/KEYS)  
UNIVERSAL KEY SET  
9
9A  
10  
11  
12  
13  
NUT, NYLOC 10 - 32  
CIRCUIT BRKR.WAYTEK #46540 40 AMP  
NUT, NYLOC 1/4- 20  
ACCESSORY SOLENOID  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 73  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SEAT AND FRAME ASSY.  
SEAT AND FRAME  
PAGE 74 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SEAT AND FRAME ASSY.  
SEAT AND FRAME  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
20032  
11632  
20059  
0300B  
5283  
10306  
8087  
10176  
8081  
0183  
20061  
12287  
PART NAME  
QTY.  
REMARKS  
FRAME, SEAT  
1
1
1
4
4
4
4
8
2
2
1
4
SEAT W/ ARM REST  
PLATE, SEAT HTH- 44T  
WASHER, FLAT 5/16 SAE  
NUT, NYLOC 5/16- 18  
SCREW, HHC 1/2- 13 X 4 1/2  
SCREW, HHC 1/2- 13 X 4  
NUT, NYLOC 1/2- 13  
PIN, CLEVIS 1/2 X 2.75 EFF.  
PIN, COTTER 1/8 1- 1/4  
PANEL, FRONT CENTER SEAT FRAME  
SCREW, THP1/4- 20 X 3/4 SS  
9
10  
11  
12  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 75  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FRAME AND FUELTANK ASSY.  
FRAME AND FUEL TANK ASSY.  
1
A
3
1
3
2
22  
2
23  
24  
21  
20  
19  
25  
9
18  
E
R
D
W
O
O
D
E
T
A
C
11  
4
17  
CONNECT TO FUEL PUMP  
SEE PAGE 42.  
5
6
12  
15  
14  
FUEL RETURN LINE  
FROM ENGINE -  
SEE PAGE 42.  
8
9
13  
7
12  
10  
STUD BOLT FOR FUEL TANK  
BRACKET IS WELDED TO FRAME  
FOR COMPLETE PEDAL PARTS  
BREAKDOWN SEE DETAIL A,  
PAGE 78.  
8
1
2
9
SPRAY ASSEMBLY,  
SEE PAGE 82.  
PAGE 76 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FRAME AND FUELTANK ASSY.  
FRAME AND FUEL TANK ASSY.  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
11628  
0202  
0105  
11678  
11418  
12025  
11922  
0300B  
5283  
PART NAME  
FOOT REST, LEFT  
QTY.  
1
2
2
1
1
2
1
4
REMARKS  
SCREW, HHC 5/16- 18 X 1  
SCREW, HHC 5/16- 18 X 1 1/2  
PANEL, FRONT HTH/STH  
FUEL CAP/ GAUGE (10.5)  
SPACER, FUEL TANK  
TANK, 12 GALLON FUEL POLYETHYLENE  
WASHER, FLAT 5/16 SAE  
NUT, NYLOC 5/16- 18  
9
6
10  
11  
12  
13  
14  
15  
17  
18  
19  
20  
21  
22  
23  
24  
25  
12021  
20160  
19633  
12006  
12010  
60058  
12023  
11584  
12489  
ZINFB04  
ZINPS0014  
12332  
ZINFB15  
ZINFB08  
3233  
BRACKET, FUEL TANK SUPPORT  
FRAME  
2
1
2
1
1
1
1
1
1
1
6
1
1
1
2
BUSHING, RUBBER FUEL  
FITTING, 90 03BARB- 4BARB FUEL  
SCREEN, FUEL (DAPCO 11656)  
HOSE, FUEL YELLOW 1/4 X 3/8 X 2"  
FITTING, 90 05BARB- 4BARB FUEL  
SIGHT GLASS, 3/4 MALE PIPE  
FLANGE GASKET  
BASE  
SCREW, #10 - 32 1/2  
CAP, HYD 5PSI 10 MICRON  
JACK CHAIN, #16 SINGLE  
CHAIN RING  
WASHER, FENDER 1.50D X 3/8 ID  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 77  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FOOT PEDALS ASSY.  
FOOT PEDALS ASSY.  
PAGE 78 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— FOOT PEDALS ASSY.  
FOOT PEDALS ASSY.  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
11628  
11491  
11228  
11199  
10136  
6014B  
11677  
1484  
PART NAME  
FOOT REST, LEFT W/A  
CABLE, THROTTLE ASM  
ACCELERATOR PEDAL  
BASE, SPEED CONTROL PEDAL  
WASHER, FLAT 3/8 SAE  
PIN, COTTER 3/32 X 1  
QTY.  
1
1
1
1
5
4
2
2
REMARKS  
PIN, SPEED CONTROL LEVER  
BUSHING, BRONZE  
9
11656  
11611  
11643  
19378  
2755  
11641  
11638  
11492  
20003  
10024  
0730  
ROCKER, SPEED CONTROL  
ROD END, 1/4- 28 FEMALE RH  
ROD END, 1/4- 28 MALE RH  
NUT, HEX JAM 1/4- 28  
ADAPTER, THROTTLE SPRING, SHORT  
SPRING, THROTTLE RETURN  
ADAPTER, SPEED CTRL SPRING  
U- BOLT, CABLE  
1
2
1
3
1
1
1
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
ROD END, 1/4- 28 FEMALE RH W/ZERK  
NUT, NYLOC 1/4- 20  
SCREW, HHC 1/4- 20 X 1  
1
3
3
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 79  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— BATTERY ASSY.  
PAGE 80 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— BATTERY ASSY.  
BATTERY ASSY.  
NO.  
1
2
3
4
5
6
7
PART NO.  
10314  
1597  
10313  
1605  
0161C  
0479  
2509  
PART NAME  
QTY.  
1
1
1
1
1
1
2
REMARKS  
BATTERY CABLE (RED)  
CABLE ASM., BLK (NEG) 16.5  
CABLE, NEG BATTERY BLACK 20  
SCREW, HHC M8- 1.25 X 25MM  
WASHER,LOCK, 5/16 MED.  
WASHER, EXT SHKP 3/8 PLTD  
WING NUT PLATED  
8
9
10031  
11692  
11693  
10318  
10315  
0949  
11362  
0948  
13212  
0730  
10930  
11680  
60052  
10024  
11534  
0166A  
11691  
WASHER, EXT SHKP 1/4  
BRACKET, BATTERY BOX  
BOLT, BATTERY BRKT  
BATTERY BOX, GROUP 24  
BATTERY 12V WET GROUP  
NUT, HEX FINISH 1/4- 20  
BATTERY BOX  
WASHER, FLAT, 1/4 SAE  
GROMMET, 1- 1/4 ID (MINOR #Z- 7141)  
SCREW, HHC 1/4- 20 X 1  
WASHER, FENDER 1/4 X 1 1/4  
COVER, REAR MAIN FRAME  
TRIM EDGE, 3/16 (100B3-3/16) ........................ 4.0 ...............SOLD IN FOOT-LENGTHS  
NUT, NYLOC 1/4- 20  
NUT, U TYPE 1/4- 20  
WASHER, LOCK, 3/8 MED  
SCREW, HHC 3/8 - 24 X 3/4  
2
1
2
1
1
4
1
12  
2
10  
11  
12  
13  
14  
15  
16  
17  
19  
20  
21  
22  
23  
24  
25  
6
4
1
4
4
1
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 81  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SPRAY ASSY.  
SPRAY ASSY.  
PAGE 82 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— SPRAY ASSY.  
SPRAY ASSY.  
NO.  
1
2
3
4
PART NO.  
PART NAME  
QTY.  
5
5
2
4
REMARKS  
0131A  
0181B  
0202  
0300B  
0948  
SCREW, HHC 1/4- 20 X 3/4  
WASHER, LOCK, 1/4 MED  
SCREW, HHC 5/16- 18 X 1  
WASHER, FLAT 5/16 SAE  
WASHER, FLAT 1/4 SAE  
5
8
6
7
8
9
10022  
11222  
12008  
12009  
12036  
12171  
12176  
12179  
12548  
19633  
19661  
2108  
2898  
2912  
2918  
3233  
392292  
5283  
60001  
60002  
60058  
60221  
8128  
FITTING, PLASTIC PLASTIC  
MOUNTING BRACKET, SPRAY NOZZLE  
FITTING, 90 FUEL  
SCREEN, FILTER DAPCO 11604  
TANK, RETARDANT 5 GALLONS  
SEAL, W/ PACK 16- 18 (GRN)  
CONNECTOR, W/ PACK 2 PIN SHROUD  
TERMINAL, W/ PACK MALE 14- 16 GA  
PUMP, SPRAY  
BUSHING, RUBBER FUEL  
VALVE, FUEL DAPCO PN 10531  
CAP, SPRAY TANK  
WASHER, BONDED NEOPRENE 1 X 1/2  
FITTING, 90 DEGREE  
1
1
1
1
1
2
1
2
1
2
1
1
1
1
4
2
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
CLAMP, HOSE .475- .536 ID  
WASHER, FENDER 1.50 D X 3/8 ID  
NOZZEL, SPRAY  
1
2
NUT, NYLOC 5/16- 18  
HOSE, .25 ID X .375 OD TYGON................ 4.75FT ...............SOLD IN FOOT-LENGTHS  
HOSE, .375 ID X .5 OD TYGON.................. 1.34FT ...............SOLD IN FOOT-LENGTHS  
HOSE, 1/4 X 3/8 PVC FUEL YELLOW ........ 0.17FT ...............SOLD IN FOOT-LENGTHS  
LOOM, .375 SPLIT ........................................ 0.5FT ...............SOLD IN FOOT-LENGTHS  
CLAMP, HOSE SUPPORT, 5/16  
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 83  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— LIGHT ASSY.  
LIGHT ASSEMBLY  
PAGE 84 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T— LIGHT ASSY.  
LIGHT ASSEMBLY  
NO.  
1
2
3
4
PART NO.  
11741  
11742  
12355  
12377  
12517  
12176  
12179  
12171  
PART NAME  
QTY.  
REMARKS  
BRACKET, LIGHT, RIGHT SIDE  
BRACKET, LIGHT, LEFT SIDE  
BRACKET, LIGHT  
1
1
2
KIT, LIGHT ASSEMBLY ........................................ 6 ...............INCLUDES ITEMS W/ *  
WIRE ASM, SPRAY & LIGHT ............................... 1  
CONNECTOR, W'PACK 2PIN SHROUD  
TERMINAL, W'PACK MALE 14 - 16 GA  
SEAL, W'PACK 16 - 18 (GRN)  
5
6*  
7*  
8*  
6
12  
12  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 85  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HTH44T—WIRING DIAGRAM  
PAGE 86 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE PAGE  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 87  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — CRANKCASE ASSY.  
CRANKCASE ASSY.  
PAGE 88 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — CRANKCASE ASSY.  
CRANKCASE ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
170  
180  
190  
200  
210  
220  
PART NO.  
PART NAME  
QTY.  
1
6
1
4
1
3
2
3
1
2
2
2
2
1
1
1
REMARKS  
1E03501010  
1545196270  
1522103490  
1526196010  
1624173170  
1624196010  
1552196020  
1739196160  
1627196160  
0501200508  
0501200814  
0501200610  
1523133960  
1624133650  
1624196262  
1522156280  
1628296010  
1627155350  
1522133610  
1502133660  
1522133700  
1584173020  
COMP. CRANKCASE  
CAP, SEALING  
CAP, SEALING  
PLUG  
JOINT, DRAIN PIPE  
PLUG  
PLUG  
PLUG, EXPANSION  
PLUG, EXPANSION  
PIN, STRAIGHT  
PIN, STRAIGHT  
PIN, STRAIGHT  
PIN, PIPE  
PIN, PIPE  
PLUG, FUEL CAMSHAFT  
PIN, START SPRING  
PLUG  
BUSH, GOVERNOR GEAR  
PLUG  
GASKET  
O- RING  
1
1
1
1
1
1
ASSEMBLY COCK, DRAIN  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 89  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL PAN ASSY.  
OIL PAN ASSY.  
PAGE 90 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL PAN ASSY.  
OIL PAN ASSY.  
NO.  
010  
030  
040  
050  
060  
070  
080  
090  
100  
PART NO.  
PART NAME  
COMP. OIL PAN  
BOLT  
PLUG, DRAIN  
GASKET  
PLUG  
GASKET  
FILTER, OIL  
BOLT  
QTY.  
REMARKS  
1661601500  
0102350612  
1654133750  
1545196670  
1522133750  
6009058960  
1624132114  
0112360816  
0481400160  
1
26  
1
1
1
1
1
1
1
O RING  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 91  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — CYLINDER HEAD ASSY.  
CYLINDER HEAD ASSY.  
PAGE 92 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — CYLINDER HEAD ASSY.  
CYLINDER HEAD ASSY.  
NO.  
010  
020  
030  
040  
045  
050  
060  
070  
080  
090  
100  
110  
120  
130  
PART NO.  
PART NAME  
QTY.  
1
1
2
1
4
1
2
4
4
3
15  
3
1
REMARKS  
1624101750  
1624101770  
0112360814  
1606503040  
1606503140  
1532196260  
1526196010  
1624113540  
1624113560  
1526103370  
1624103450  
1627103450  
1629203310  
1584196020  
HOOK ENGINE  
HOOK ENGINE  
BOLT  
COMP. CYLINDER HEAD  
COMBUSTION CHAMBER  
CAP, SEALING  
PLUG  
GUIDE, INLET VALVE  
GUIDE, EXHAUST VALVE  
CAP, SEALING  
BOLT, CYLINDER HEAD  
BOLT, CYLINDER HEAD  
GASKET, CYLINDER HEAD  
PLUG  
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 93  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — GEAR CASE ASSY.  
GEAR CASE ASSY.  
PAGE 94 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — GEAR CASE ASSY.  
GEAR CASE ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
170  
180  
190  
200  
210  
230  
PART NO.  
PART NAME  
COMP. CASE, GEAR  
PLUG  
SPRING  
SEAT, VALVE  
BALL  
ASSEMBLY ROTOR, OIL PUMP  
COVER, OIL PUMP  
SCREW, CSK- HD  
GASKET, GEAR CASE  
BOLT  
BOLT  
BOLT  
BOLT  
BOLT  
STUD  
NUT  
WASHER, SPRING  
SEAL, OIL  
O RING  
O RING  
QTY.  
1
2
1
1
1
1
1
5
1
3
6
2
1
1
1
1
REMARKS  
1624104020  
1624196020  
1624136950  
1624136930  
0771500201  
1624135070  
1624135130  
1624193120  
1626404130  
0102350645  
0102360650  
0102350655  
1584191040  
1624191040  
1624591530  
0205650060  
0451260060  
1624104212  
0481406100  
0481400150  
1624591540  
1626483342  
1
1
2
2
2
1
STUD  
COVER, GEAR CASE  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 95  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — DIPSTICK AND GUIDE ASSY.  
DIPSTICK AND GUIDE ASSY.  
PAGE 96 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — DIPSTICK AND GUIDE ASSY.  
DIPSTICK AND GUIDE ASSY.  
NO.  
010  
020  
030  
040  
PART NO.  
PART NAME  
GAUGE, OIL  
ASSEMBLY GUIDE, OILGAUGE  
O RING  
BOLT  
QTY.  
REMARKS  
1661136412  
1628236500  
0481400090  
0112360814  
1
1
1
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 97  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — MAIN BEARING CASE ASSY.  
MAIN BEARING CASE ASSY.  
PAGE 98 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — MAIN BEARING CASE ASSY.  
MAIN BEARING CASE ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
095  
100  
110  
120  
130  
140  
PART NO.  
PART NAME  
QTY.  
1
2
1
1
1
1
8
9
1
2
3
1
2
1
2
REMARKS  
1624104092  
1624104540  
1626404360  
1624104813  
1624104460  
1626404820  
0102350625  
0102350620  
1629204040  
1624104540  
1624104560  
1629204050  
1624104540  
1629204060  
1624104540  
ASSEMBLY CASE, MAIN BRG.  
BOLT, BEARING CASE  
GASKET, BRG. CASE  
COVER, BEARING CASE  
SEAL, OIL  
GASKET  
BOLT  
BOLT  
ASSEMBLY CASE, MAIN BRG.  
BOLT, BEARING CASE  
BOLT, BEARING CASE  
ASSEMBLY CASE, MAIN BRG.  
BOLT, BEARING CASE  
ASSEMBLY CASE, MAIN BRG.  
BOLT, BEARING CASE  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 99  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — CAMSHAFT AND IDLE GEAR SHAFT ASSY.  
CAMSHAFT AND IDLE GEAR SHAFT ASSY.  
PAGE 100 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — CAMSHAFT AND IDLE GEAR SHAFT ASSY.  
CAMSHAFT AND IDLE GEAR SHAFT ASSY.  
NO.  
010  
020  
030  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
PART NO.  
PART NAME  
QTY.  
8
8
1
1
1
1
1
2
1
1
1
1
1
1
3
REMARKS  
1626115550  
1624115110  
1629216010  
1552193610  
1624116510  
0571200518  
1624116270  
0102350614  
1627124010  
1627124980  
1624124360  
1624124370  
1624124320  
1624124250  
0102350616  
TAPPET  
PUSH ROD  
ASSEMBLY, CAMSHAFT  
SCREW, SET  
GEAR, CAM  
KEY, FEATHER  
STOPPER, CAMSHAFT  
BOLT  
COMP. GEAR, IDLE  
BUSH, IDLE GEAR  
COLLAR, IDLE GEAR  
COLLAR, IDLE GEAR  
CIR. CLIP, IDLE GEAR  
SHAFT, IDLE GEAR  
BOLT  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 101  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — PISTON AND CRANKSHAFT ASSY.  
PISTON AND CRANKSHAFT ASSY.  
PAGE 102 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — PISTON AND CRANKSHAFT ASSY.  
PISTON AND CRANKSHAFT ASSY.  
NO.  
010  
010  
020  
020  
030  
040  
050  
060  
070  
080  
080  
080  
090  
110  
120  
130  
140  
150  
160  
170  
180  
180  
180  
190  
190  
190  
200  
200  
200  
210  
210  
210  
220  
220  
220  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1629221110  
1606021910  
1629221050  
1626121090  
1624121310  
1624121330  
1629222010  
1624121980  
1624122140  
1629222310  
1624122970  
1624122980  
1628223013  
0771500401  
1624124110  
1627195230  
1624135630  
1624123280  
1624123250  
0481410280  
1629223470  
1624123910  
1624123920  
1629223480  
1624123930  
1624123940  
1629223490  
1624123860  
1624123870  
1552123530  
1552123950  
1552123960  
1920223540  
1920223970  
1920223980  
PISTON ..........................................................4 ................. STANDARD  
PISTON ..........................................................4 ................. +0.50MM  
ASSEMBLY, PISTON RING ...........................4 ................. STANDARD  
ASSEMBLY, PISTON RING ...........................4 ................. +0.50MM  
PIN, PISTON  
4
8
4
4
8
CIR. CLIP, PISTON PIN  
ASSEMBLY ROD, CONNECTING  
BUSH, PISTON PIN  
BOLT, CONNECTING ROD  
METAL, CRANKPIN .......................................4 ................. STANDARD SET  
METAL, CRANKPIN .......................................4 ................. - 0.2MM SET  
METAL, CRANKPIN .......................................4 ................. - 0.4MM SET  
COMP. CRANKSHAFT  
BALL  
1
4
1
1
1
1
1
1
GEAR, CRANK  
KEY  
GEAR, OIL PUMP DRIVE  
SLEEVE, CRANKSHAFT  
COLLAR, CRANKSHAFT  
O RING  
METAL, CRANKSHAFT .................................1 ................. STANDARD  
METAL, CRANKSHAFT .................................1 ................. - 0.2MM  
METAL, CRANKSHAFT .................................1 ................. - 0.4MM  
METAL, CRANKSHAFT .................................3 ................. STANDARD SET  
METAL, CRANKSHAFT .................................3 ................. - 0.2MM SET  
METAL, CRANKSHAFT .................................3 ................. - 0.4MM SET  
METAL, CRANKSHAFT .................................1 ................. STANDARD SET  
METAL, CRANKSHAFT .................................1 ................. - 0.2MM SET  
METAL, CRANKSHAFT .................................1 ................. - 0.4MM SET  
METAL, SIDE .................................................2 ................. STANDARD  
METAL, SIDE .................................................2 ................. +0.2MM  
METAL, SIDE .................................................2 ................. +0.4MM  
METAL, SIDE .................................................2 ................. STANDARD  
METAL, SIDE .................................................2 ................. +0.2MM  
METAL, SIDE .................................................2 ................. +0.4MM  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 103  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FLYWHEEL ASSY.  
FLYWHEEL ASSY.  
PAGE 104 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FLYWHEEL ASSY.  
FLYWHEEL ASSY.  
NO.  
010  
030  
040  
050  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1661425012  
1624125160  
1E01904620  
1526191190  
COMP. FLYWHEEL  
BOLT, FLYWHEEL  
PLATE, REAR END  
BOLT  
1
6
1
8
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 105  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FUEL CAMSHAFT AND GOV. SHAFT ASSY.  
FUEL CAMSHAFT AND GOVERNOR SHAFT ASSY.  
PAGE 106 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FUEL CAMSHAFT AND GOV. SHAFT ASSY.  
FUEL CAMSHAFT AND GOVERNOR SHAFT ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
170  
180  
190  
200  
210  
220  
230  
240  
PART NO.  
PART NAME  
CAMSHAFT, FUEL  
BEARING, BALL  
BEARING, BALL  
GEAR, INJECTION PUMP  
CAM, FUEL  
NUT, CAP  
KEY, WOODRUFF  
BOLT  
QTY.  
1
1
1
1
1
1
1
3
1
2
1
1
1
1
1
2
2
2
1
1
1
1
1
1
REMARKS  
1604016170  
0810306202  
0810306204  
1627251150  
1624151113  
1624192330  
1624195230  
0102350618  
1624116320  
0102350612  
1628255013  
1627155313  
1624155392  
1628255320  
1624155270  
1624155062  
1624155260  
1948455440  
1624155450  
1624155463  
0810106304  
1627155410  
1624155554  
1624151190  
STOPPER, FUEL CAMSHAFT  
BOLT  
ASSEMBLY SHAFT, GOVERNOR  
SHAFT, GOVERNOR  
HOLDER, GOVERNOR GEAR  
GEAR, GOVERNOR  
HOLDER, GOVERNOR WEIGHT  
COMP. WEIGHT, GOVERNOR  
SHAFT, GOVERNOR WEIGHT  
ROLLER  
SLEEVE, GOVERNOR  
WASHER, THRUST  
BEARING, BALL  
CIR. CLIP, GOVERNOR SHAFT  
SCREW, SET  
WASHER  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 107  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ENGINE STOP LEVER ASSY.  
ENGINE STOP LEVER ASSY.  
PAGE 108 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ENGINE STOP LEVER ASSY.  
ENGINE STOP LEVER ASSY.  
NO.  
010  
020  
030  
040  
050  
070  
080  
090  
100  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1628554090  
1628554102  
1584192020  
1584192330  
1560196650  
1624154120  
1584192020  
1584192330  
1560196650  
ASSEMBLY APPARATUS, IDLE  
1
1
1
1
2
1
1
1
2
ASSEMBLY BOLT, ADJUSTING  
NUT  
NUT, CAP  
GASKET  
BOLT, ADJUSTING  
NUT  
NUT, CAP  
GASKET  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 109  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — STOP SOLENOID ASSY.  
STOP SOLENOID ASSY.  
PAGE 110 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — STOP SOLENOID ASSY.  
STOP SOLENOID ASSY.  
NO.  
010  
020  
030  
040  
PART NO.  
PART NAME  
SOLENOID, STOP  
GASKET  
BOLT, HEX- SOC- HD  
WASHER, SPRING  
QTY.  
REMARKS  
1745460010  
1629960150  
0131110614  
0451260060  
1
1
2
2
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 111  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — INJECTION PUMP ASSY.  
KUBOTA V-1505 — INJECTION PUMP ASSY.  
INJECTION PUMP ASSY.  
PAGE 112 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — INJECTION PUMP ASSY.  
INJECTION PUMP ASSY.  
NO.  
010  
020  
030  
040  
050  
050  
060  
070  
080  
090  
100  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1624195690  
1624142010  
1491142750  
1606051010  
1604052092  
1604052112  
1604052122  
0131110620  
1584191500  
1584192320  
0451260060  
JOINT, EYE  
1
1
2
1
ASSEMBLY PIPE, FUEL  
CLIP, PIPE  
ASSEMBLY PUMP, INJECTION  
SHIM, INJECTION PUMP ..............................1 ................. 0.20MM  
SHIM, INJECTION PUMP ..............................1 ................. 0.25MM  
SHIM, INJECTION PUMP ..............................1 ................. 0.30MM  
BOLT, HEX- SOC- HD  
STUD  
3
3
3
6
NUT, CAP  
WASHER, SPRING  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 113  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 —NOZZLE AND GLOW PLUG ASSY.  
NOZZLE HOLDER AND GLOW PLUG ASSY.  
PAGE 114 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 —NOZZLE AND GLOW PLUG ASSY.  
NOZZLE HOLDER AND GLOW PLUG ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
170  
180  
190  
PART NO.  
PART NAME  
QTY.  
1
1
1
1
2
4
4
4
1
1
1
1
3
3
3
4
REMARKS  
1627142502  
1584151360  
1560196650  
1584142500  
1497142750  
1603253000  
1584153622  
1907753650  
1628253712  
1627153722  
1627153732  
1627153742  
1584153850  
1584153860  
0302450520  
1606565510  
1627165560  
0276150040  
0401360040  
ASSEMBLY PIPE, OVER FLOW  
SCREW, AIR BREEDER  
GASKET  
ASSEMBLY PIPE, OVER FLOW  
CLIP, PIPE  
ASSEMBLY HOLDER, NOZZLE  
GASKET  
SEAL, HEAT  
PIPE, INJECTION  
PIPE, INJECTION  
PIPE, INJECTION  
PIPE, INJECTION  
CLAMP, PIPE  
CLAMP, PIPE  
SCREW, WITH WASHER  
GOLW PLUG  
CORD, GLOW PLUG  
NUT, FLANGE  
1
4
4
WASHER, PLAIN  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 115  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — NOZZLE HOLDER (COMPONENT PARTS) ASSY.  
NOZZLE HOLDER (COMPONENT PARTS) ASSY.  
PAGE 116 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — NOZZLE HOLDER (COMPONENT PARTS) ASSY.  
NOZZLE HOLDER (COMPONENT PARTS) ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
110  
110  
110  
110  
110  
110  
110  
110  
110  
PART NO.  
PART NAME  
ASSEMBLY HOLDER, NOZZLE  
NUT  
WASHER, ADJUSTING  
SPRING, NOZZLE  
SPACER, DISTANCE  
PUSH ROD  
NUT, NOZZLE  
WASHER, PLAIN  
PIECE, NOZZLE  
ASSEMBLY WASHER, ADJUST ....................4 ................. OPTION  
WASHER, ADJUSTING..................................4 ................. 0. 10MM  
WASHER, ADJUSTING..................................4 ................. 0. 20MM  
WASHER, ADJUSTING..................................4 ................. 0. 30MM  
WASHER, ADJUSTING..................................4 ................. 0. 40MM  
WASHER, ADJUSTING..................................4 ................. 0. 50MM  
WASHER, ADJUSTING..................................4 ................. 0. 52MM  
WASHER, ADJUSTING..................................4 ................. 0. 54MM  
WASHER, ADJUSTING..................................4 ................. 0. 56MM  
WASHER, ADJUSTING..................................4 ................. 0. 58MM  
WASHER, ADJUSTING..................................4 ................. 0. 80MM  
QTY.  
REMARKS  
1603253000  
1603292030  
1603253230  
1603253170  
1603253350  
1603253160  
1603253280  
1603294040  
1603253610  
1603298100  
1603298500  
1603298510  
1603298520  
1603298530  
1603298540  
1603298550  
1603298560  
1603298570  
1603298580  
1603298590  
4
4
4
4
4
4
4
4
4
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 117  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FORK LEVER (GOVERNOR) ASSY.  
FORK LEVER (GOVERNOR) ASSY.  
PAGE 118 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FORK LEVER (GOVERNOR) ASSY.  
FORK LEVER (GOVERNOR) ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
120  
130  
140  
PART NO.  
PART NAME  
QTY.  
1
1
1
2
1
1
1
1
1
1
2
1
REMARKS  
1627156480  
1628556412  
1629256052  
1948455440  
1622256130  
1624256153  
1624194010  
1624156330  
0461200090  
1624156250  
0102350614  
1624156210  
1624156340  
SPRING, START  
SPRING, GOVERNOR  
ASSEMBLY LEVER, FORK  
ROLLER  
LEVER, FORK  
SHAFT, FORK LEVER  
WASHER, PLAIN  
BEARING, MINIATURIZE  
CIR. CLIP, EXTERNAL  
COVER, FORK LEVER SHAFT  
BOLT  
COLLAR  
BEARING MINIATURIZE  
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 119  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FUEL PUMP (MECHANICAL) ASSY.  
FUEL PUMP (MECHANICAL) ASSY.  
PAGE 120 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FUEL PUMP (MECHANICAL) ASSY.  
FUEL PUMP (MECHANICAL) ASSY.  
NO.  
010  
020  
030  
040  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1628552032  
1626452140  
0205650060  
0451260060  
ASSEMBLY PUMP, FUEL  
GASKET, FUEL PUMP  
NUT  
1
1
2
2
WASHER, SPRING  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 121  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ALTENATOR AND PULLY ASSY.  
ALTERNATOR AND PULLEY ASSY.  
PAGE 122 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ALTENATOR AND PULLY ASSY.  
ALTERNATOR AND PULLEY ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
130  
140  
150  
160  
170  
180  
190  
200  
210  
220  
230  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1624164010  
1624164420  
0112350830  
0117351085  
0217650100  
0401150100  
0451260100  
0401560080  
0102350616  
1624975280  
1624191020  
1628297010  
1988365830  
1987265840  
1987265880  
1923765910  
1926865780  
6827165910  
6827165920  
1926865930  
1926865870  
1625965830  
ASSEMBLY ALERNATOR ..............................1 ................. 12V/40A  
STAY, DYNAMO  
BOLT  
BOLT  
1
1
1
1
1
1
1
1
1
1
NUT  
WASHER, PLAIN  
WASHER, SPRING  
WASHER, PLAIN  
BOLT  
PULLEY, FAN DRIVE  
BOLT, FAN DRIVE  
V BELT ...........................................................1 ................. 37.5 IN.  
ASSEMBLY COUPLER  
CONNECTOR  
CONNECTOR  
TERMINAL  
ASSEMBLY TERMINAL  
TERMINAL  
SLEEVE  
TERMINAL  
SLEEVE  
ASSEMBLY COUPLER, LOCK  
1
1
1
7
1
1
1
1
1
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 123  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ALTENATOR (COMP. PARTS) ASSY.  
ALTERNATOR (COMONENT PARTS) ASSY.  
PAGE 124 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ALTENATOR (COMP. PARTS) ASSY.  
ALTERNATOR( COMPONENT PARTS) ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
170  
180  
190  
200  
210  
220  
230  
240  
250  
260  
270  
280  
PART NO.  
PART NAME  
QTY.  
1
1
1
1
1
1
1
1
1
1
4
2
1
1
1
1
1
1
2
2
2
6
1
3
2
2
1
1
REMARKS  
1624164010  
1588164110  
1588192010  
1588164150  
1588164040  
1588164800  
1588164770  
1588164810  
1588164020  
1588184710  
1588193010  
1588164260  
1588164780  
1624164060  
1624164230  
1624164850  
1624164900  
1588164310  
1588164090  
1588164330  
1588193020  
1588193030  
1588193040  
1588191040  
1588192020  
1588191050  
1418292030  
1588164600  
ASSEMBLY ALERNATOR  
PULLEY, DYNAMO  
NUT  
COLLAR  
ROTOR  
COVER, BEARING  
BEARING, BALL  
WASHER, THRUST  
FRAME, DRIVE END  
PLATE, RETAINER  
SCREW, ROUND HEAD  
BOLT, THROUGH  
BEARING, BALL  
FRAME, END  
COVER, END  
ASSEMBLY RECTIFIER  
BUSH, INSULATION  
HOLDER, BRUSH  
BRUSH  
SPRING, BRUSH  
SCREW, ROUND HEAD  
SCREW, ROUND HEAD  
SCREW, ROUND HEAD  
BOLT  
NUT  
BOLT  
NUT  
ASSEMBLY REGULATOR  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 125  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — STARTER ASSY.  
STARTER ASSY.  
PAGE 126 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — STARTER ASSY.  
STARTER ASSY.  
NO.  
010  
020  
PART NO.  
2756063010  
0112350830  
PART NAME  
ASSEMBLY STARTER  
BOLT  
QTY.  
1
2
REMARKS  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 127  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — STARTER (COMPONENT PARTS) ASSY.  
STARTER (COMPONENT PARTS)ASSY.  
PAGE 128 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — STARTER (COMPONENT PARTS) ASSY.  
STARTER (COMPONENT PARTS)ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
170  
180  
190  
200  
210  
220  
230  
240  
250  
260  
270  
PART NO.  
PART NAME  
QTY.  
1
1
1
1
1
1
1
1
1
4
1
1
5
1
1
1
2
2
2
1
1
1
1
2
REMARKS  
2756063010  
3756063080  
1146063070  
1146063500  
1146063530  
1628563040  
1628563030  
1661163020  
1147063380  
1146063390  
1628563200  
1146063270  
1921263100  
1146063110  
1921297130  
1146063120  
1146093310  
1146063320  
1551163760  
1628592010  
1661163450  
1380194100  
1661192020  
1551196660  
1628563570  
1661163660  
1661263100  
ASSEMBLY STARTER  
ASSEMBLY YOKE  
ARMATURE  
BEARING  
BEARING  
ASSEMBLY CLUTCH  
ASSEMBLY HOUSING  
ASSEMBLY SWITCH, MAGNETIC  
ASSEMBLY HOLDER, BRUSH  
SPRING, BRUSH  
ASSEMBLY FRAME, END  
GEAR  
ROLLER  
RETAINER  
BALL  
SPRING  
BOLT  
BOLT, THROUGH  
ASSEMBLY BOLT  
NUT, HEXAGON  
COVER  
WASHER, SPRING  
NUT, HEXAGON  
O RING  
PIPE, DRAIN  
CORD, STOP SOLENOID  
BAND, COVER  
1
1
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 129  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL SWITCHT/THERMO AND PLUG ASSY.  
OIL SWITCH/THERMOMETER AND PLUG ASSY.  
PAGE 130 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL SWITCHT/THERMO AND PLUG ASSY.  
OIL SWITCH/THERMOMETER AND PLUG ASSY.  
NO.  
010  
PART NO.  
1584139010  
PART NAME  
SWITCH, OIL  
QTY.  
1
REMARKS  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 131  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — WATERFLANG AND THERMOSTAT ASSY.  
WATER FLANGE AND THERMOSTAT ASSY.  
PAGE 132 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — WATERFLANG AND THERMOSTAT ASSY.  
WATER FLANGE AND THERMOSTAT ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1661372700  
1624173370  
1929896020  
1626472920  
0102350616  
0102350655  
1624173350  
1624173360  
1943473010  
1621973260  
1531373270  
0112350835  
COMP. FLANGE, WATER  
PIPE, WATER RETURN  
PLUG  
1
1
2
1
3
1
1
2
1
1
1
2
GASKET, WATER FLANGE  
BOLT  
BOLT  
PIPE, WATER RETURN  
BAND, PIPE  
ASSEMBLY THERMOSTAT  
COVER, THERMOSTAT  
GASKET, THERMOSTAT  
BOLT  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 133  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — WATER PUMP ASSY.  
WATER PUMPASSY.  
PAGE 134 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — WATER PUMP ASSY.  
WATER PUMPASSY.  
NO.  
010  
020  
030  
040  
050  
055  
060  
070  
080  
PART NO.  
PART NAME  
ASSEMBLY PUMP, WATER  
BEARING  
ASSEMBLY SEAL, MECHANICAL  
IMPELLER, WATER PUMP  
PIPE, WATER RETURN  
FLANGE, WATER PUMP  
GASKET, WATER PUMP  
BOLT, FLANGE  
QTY.  
REMARKS  
1624173032  
1624173550  
1624173052  
1624173510  
1624173340  
1624173520  
1626173430  
0175450625  
0102350680  
1
1
1
1
1
1
1
4
2
BOLT  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 135  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — WATER PIPE ASSY.  
WATER PIPE ASSY.  
PAGE 136 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — WATER PIPE ASSY.  
WATER PIPE ASSY.  
NO.  
010  
020  
030  
PART NO.  
PART NAME  
PIPE, WATER  
PIPE, WATER  
CLAMP  
QTY.  
REMARKS  
1624172860  
1624172870  
3620082720  
1
1
2
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 137  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FAN ASSY.  
FAN ASSY.  
PAGE 138 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — FAN ASSY.  
FAN ASSY.  
NO.  
010  
020  
030  
040  
PART NO.  
PART NAME  
FAN  
PULLEY, FAN  
BOLT, FLANGE  
COLLAR, FAN  
QTY.  
REMARKS  
1629274110  
1624174250  
0175450820  
1587674150  
1
1
4
1
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 139  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — VALVE AND ROCKER ARM ASSY.  
VALVE AND ROCKER ARM ASSY.  
PAGE 140 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — VALVE AND ROCKER ARM ASSY.  
VALVE AND ROCKER ARM ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
130  
140  
150  
160  
170  
190  
200  
210  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1624113110  
1629913120  
1526113240  
1624113330  
1526113360  
1001013150  
1624113280  
1624114264  
0102350610  
1624114350  
1624114410  
1526192010  
1526194010  
0541100428  
1624114430  
1584194022  
1624114310  
1624114032  
1624114230  
1624114240  
VALVE, INLET  
4
4
8
8
VALVE, EXHAUST  
SPRING, VALVE  
RETAINER, VALVE SP.  
COLLET, VALVE SPRING ..............................8 ................. SET  
SEAL, VALVE STEM  
CAP, VALVE  
SHAFT, ROCKER ARM  
BOLT  
BRACKET, ROCKER ARM  
STUD  
NUT  
WASHER, PLAIN  
PIN, SPRING  
WASHER, R- ARM, SHAFT  
WASHER, PLAIN  
SPRING, ROCKER ARM  
ASSEMBLY ROCKER ARM  
SCREW, ADJUSTING  
NUT  
8
8
1
2
4
4
4
4
1
2
2
3
8
8
8
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 141  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — INLET MANIFOLD ASSY.  
INLET MANIFOLD ASSY.  
PAGE 142 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — INLET MANIFOLD ASSY.  
INLET MANIFOLD ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
PART NO.  
PART NAME  
ASSEMBLY MANIFOLD, INLET  
GASKET, IN- MANIFOLD  
BOLT  
BOLT  
BOLT  
PIPE, INLET  
PIPE, INLET  
PIPE, INLET  
BAND, PIPE  
BAND, PIPE  
QTY.  
REMARKS  
1624111770  
1624111820  
0102350618  
0102350630  
0102360650  
1624111630  
1624111640  
1624111670  
1624172970  
1624111720  
1
1
3
2
3
1
1
1
2
2
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 143  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — EXHAUST MANIFOLD ASSY.  
EXHAUST MANIFOLD ASSY.  
PAGE 144 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — EXHAUST MANIFOLD ASSY.  
EXHAUST MANIFOLD ASSY.  
NO.  
010  
020  
030  
040  
050  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1624112310  
1629912360  
1624191490  
1627192010  
0151360820  
MANIFOLD, EXHAUST  
1
1
8
8
3
GASKET, EX- MANIFOLD  
STUD  
NUT  
STUD  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 145  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — TURBO CHARGER ASSY.  
TURBO CHARGER ASSY.  
PAGE 146 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — TURBO CHARGER ASSY.  
TURBO CHARGER ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
PART NO.  
PART NAME  
QTY.  
REMARKS  
1629217010  
1629917100  
0215650080  
0451260080  
1755412320  
1629917110  
0112350830  
0112350845  
0112350822  
ASSEMBLY TURBO CHARGER  
1
1
3
3
1
1
3
1
2
GASKET  
NUT  
WASHER, SPRING  
FLANGE, MUFFLER  
GASKET  
BOLT  
BOLT  
BOLT  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 147  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL PIPE (TURBO CHARGER) ASSY.  
OIL PIPE (TURBO CHARGER) ASSY.  
PAGE 148 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL PIPE (TURBO CHARGER) ASSY.  
OIL PIPE (TURBO CHARGER) ASSY.  
NO.  
010  
020  
030  
040  
050  
060  
070  
080  
090  
100  
110  
120  
PART NO.  
PART NAME  
COMP. PIPE, OIL  
BOLT, EYE JOINT  
GASKET  
BOLT, EYE JOINT  
COMP. PIPE, OIL  
GASKET  
BOLT  
COMP. PIPE, OIL  
PIPE, OIL  
QTY.  
REMARKS  
1624133210  
1624195800  
1547196650  
1624133360  
1624133220  
1629933670  
0102350620  
1624133232  
1624133240  
0931888200  
1544133520  
3343082760  
1
1
4
1
1
1
3
1
1
2
1
1
CLAMP, HOSE  
CLAMP, PIPE  
PIN, BAND  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 149  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — HYDRAULIC PUMP ASSY.  
HYDRAULIC PUMP ASSY.  
PAGE 150 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — HYDRAULIC PUMP ASSY.  
HYDRAULIC PUMP ASSY.  
NO.  
010  
PART NO.  
1626483152  
PART NAME  
COVER, HYDRAULIC PUMP  
QTY.  
1
REMARKS  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 151  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL COOLER ASSY.  
OIL COOLER ASSY.  
PAGE 152 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — OIL COOLER ASSY.  
OIL COOLER ASSY.  
NO.  
010  
020  
030  
040  
050  
PART NO.  
PART NAME  
ASSEMBLY COOLER, OIL  
O RING  
PIPE COOLER, OIL  
PIPE, WATER RETURN  
BAND, PIPE  
QTY.  
REMARKS  
1629937010  
0481450600  
1624137150  
1624173350  
1624173360  
1
1
1
1
4
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 153  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — GLOW PLUG/LAMP AND TIMER ASSY.  
GLOW PLUG/LAMP AND TIMER ASSY.  
PAGE 154 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — GLOW PLUG/LAMP AND TIMER ASSY.  
GLOW PLUG/LAMP AND TIMER ASSY.  
NO.  
010  
020  
PART NO.  
1540364490  
1569465990  
PART NAME  
LAMP, INDICATOR  
TIMER, GLOW LAMP  
QTY.  
1
1
REMARKS  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 155  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ENGINE STAND ASSY.  
ENGINE STAND ASSY.  
PAGE 156 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ENGINE STAND ASSY.  
ENGINE STAND ASSY.  
NO.  
010  
PART NO.  
1661606110  
PART NAME  
STAND, ENGINE  
QTY.  
4
REMARKS  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 157  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ACCESSORY AND SERVICE PARTS ASSY.  
ACCESSORIES AND SERVICE PARTS ASSY.  
PAGE 158 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — ACCESSORY AND SERVICE PARTS ASSY.  
ACCESSORIES AND SERVICE PARTS ASSY.  
NO.  
010  
PART NO.  
1526312370  
PART NAME  
GASKET, MUFFLER NA  
QTY.  
1
REMARKS  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 159  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — LABEL ASSY.  
LABEL AND OPERATOR’S MANUAL ASSY.  
PAGE 160 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
KUBOTA V-1505 — LABEL ASSY.  
LABEL AND OPERATOR’S MANUAL ASSY.  
NO.  
020  
030  
040  
PART NO.  
PART NAME  
NAME PLATE, ENGINE  
LABEL  
QTY.  
REMARKS  
1629287112  
1942687903  
1942687880  
1
1
1
LABEL, INSTRUCTION  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 161  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TERMS AND CONDITIONS OF SALE — PARTS  
5. Parts must be in new and resalable  
condition, in the original Multiquip  
package (if any), and with Multiquip part  
numbers clearly marked.  
Multiquip reserves the right to quote and  
sell direct to Government agencies, and to  
Original Equipment Manufacturer accounts  
who use our products as integral parts of their  
own products.  
PAYMENT TERMS  
Terms of payment for parts are net 30 days.  
FREIGHT POLICY  
6. The following items are not returnable:  
All parts orders will be shipped collect or  
prepaid with the charges added to the invoice.  
All shipments are F.O.B. point of origin.  
Multiquip’s responsibility ceases when a  
signed manifest has been obtained from the  
carrier, and any claim for shortage or damage  
must be settled between the consignee and  
the carrier.  
a. Obsolete parts. (If an item is in the  
price book and shows as being  
replaced by another item, it is  
obsolete.)  
SPECIAL EXPEDITING SERVICE  
A $35.00 surcharge will be added to the  
invoice for special handling including bus  
shipments, insured parcel post or in cases  
where Multiquip must personally deliver the  
parts to the carrier.  
b. Any parts with a limited shelf life  
(such as gaskets, seals, “O” rings,  
and other rubber parts) that were  
purchased more than six months  
prior to the return date.  
LIMITATIONS OF SELLER’S LIABILITY  
MINIMUM ORDER  
Multiquip shall not be liable hereunder for  
damages in excess of the purchase price of  
the item with respect to which damages are  
claimed, and in no event shall Multiquip be  
liable for loss of profit or good will or for any  
other special, consequential or incidental  
damages.  
The minimum charge for orders from Multiquip  
is $15.00 net. Customers will be asked for  
instructions regarding handling of orders not  
meeting this requirement.  
c. Any line item with an extended  
dealer net price of less than  
$5.00.  
d. Special order items.  
RETURNED GOODS POLICY  
e. Electrical components.  
f. Paint, chemicals, and lubricants.  
g. Decals and paper products.  
h. Items purchased in kits.  
Return shipments will be accepted and  
credit will be allowed, subject to the following  
provisions:  
LIMITATION OF WARRANTIES  
No warranties, express or implied, are  
made in connection with the sale of parts or  
trade accessories nor as to any engine not  
manufactured by Multiquip. Such warranties  
made in connection with the sale of new,  
complete units are made exclusively by a  
statement of warranty packaged with such  
units, and Multiquip neither assumes nor  
authorizes any person to assume for it  
any other obligation or liability whatever in  
connection with the sale of its products. Apart  
from such written statement of warranty,  
there are no warranties, express, implied or  
statutory, which extend beyond the description  
of the products on the face hereof.  
1. A Returned Material Authorization  
must be approved by Multiquip prior to  
shipment.  
7. The sender will be notified of any material  
received that is not acceptable.  
8. Such material will be held for five  
working days from notification, pending  
instructions. If a reply is not received  
within five days, the material will be  
returned to the sender at his expense.  
2. To obtain a Return Material Authorization,  
a list must be provided to Multiquip  
Parts Sales that defines item numbers,  
quantities, and descriptions of the items  
to be returned.  
9. Credit on returned parts will be issued  
at dealer net price at time of the original  
purchase, less a 15% restocking  
charge.  
a. The parts numbers and descriptions  
must match the current parts price  
list.  
b. The list must be typed or computer  
generated.  
10. In cases where an item is accepted, for  
which the original purchase document  
can not be determined, the price will be  
based on the list price that was effective  
twelve months prior to the RMA date.  
c. The list must state the reason(s)  
for the return.  
Effective: February 22, 2006  
d. The list must reference the sales  
order(s) or invoice(s) under  
which the items were originally  
purchased.  
11. Credit issued will be applied to future  
purchases only.  
PRICING AND REBATES  
e. The list must include the name  
and phone number of the person  
requesting the RMA.  
Prices are subject to change without prior  
notice. Price changes are effective on a  
specific date and all orders received on or  
after that date will be billed at the revised price.  
Rebates for price declines and added charges  
for price increases will not be made for stock  
on hand at the time of any price change.  
3. AcopyoftheReturnMaterialAuthorization  
must accompany the return shipment.  
4. Freight is at the sender’s expense. All  
parts must be returned freight prepaid to  
Multiquip’s designated receiving point.  
PAGE 162 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE PAGE  
HTH44T • RIDE-ON POWER TROWEL — OPERATION & PARTS MANUAL — REV. #8 (03/27/12) — PAGE 163  
— PAGE RM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION AND PARTS MANUAL  
HERE’S HOW TO GET HELP  
PLEASE HAVE THE MODEL AND SERIAL  
NUMBER ON-HAND WHEN CALLING  
UNITED STATES  
Multiquip Corporate Office  
MQ Parts Department  
18910 Wilmington Ave.  
Carson, CA 90746  
Contact: mq@multiquip.com  
Tel. (800) 421-1244  
Fax (800) 537-3927  
800-427-1244  
310-537-3700  
Fax: 800-672-7877  
Fax: 310-637-3284  
Service Department  
Warranty Department  
800-421-1244  
310-537-3700  
Fax: 310-537-4259  
800-421-1244  
310-537-3700  
Fax: 310-943-2249  
Technical Assistance  
800-478-1244  
Fax: 310-943-2238  
MEXICO  
UNITED KINGDOM  
MQ Cipsa  
Multiquip (UK) Limited Head Office  
Carr. Fed. Mexico-Puebla KM 126.5  
Momoxpan, Cholula, Puebla 72760 Mexico  
Contact: pmastretta@cipsa.com.mx  
Tel: (52) 222-225-9900  
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223  
Fax: (52) 222-285-0420 Globe Lane,  
Dukinfield, Cheshire SK16 4UJ  
Contact: sales@multiquip.co.uk  
Fax: 0161 339 3226  
CANADA  
Multiquip  
4110 Industriel Boul.  
Laval, Quebec, Canada H7L 6V3  
Contact: jmartin@multiquip.com  
Tel: (450) 625-2244  
Tel: (877) 963-4411  
Fax: (450) 625-8664  
© COPYRIGHT 2012, MULTIQUIP INC.  
Multiquip Inc, the MQ logo and the Whiteman logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other  
trademarks are the property of their respective owners and used with permission.  
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.  
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in  
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published  
in this publication at any time without notice and without incurring any obligations.  
Your Local Dealer is:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Cooktop KM 5840 User Manual
Miele Washer W 1901 WPS User Manual
NEC Flat Panel Television PX 42XM4A User Manual
NEC Network Card NDA 30115 001 User Manual
NEC Recording Equipment 760417 User Manual
NETGEAR Network Router 202 11171 04 User Manual
Nissan Automobile 2009 Altima Hybrid User Manual
NuTone Door LA107WH User Manual
One for All Universal Remote URC 6800 User Manual
Oregon Scientific Marine Instruments THC268 User Manual