Miele Freezer 09 169 330 User Manual

Operating and Installation

Instructions

Freezer

with Ice/Water Dispenser

F 1471 SF

en - US, CA

To prevent accidents

and appliance damage

read these instructions

before

installation or use.

M.-Nr. 09 169 330

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Door seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Water filter change indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Exchanging the water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Confirming the filter change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Using an external water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Lead free certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Stainless steel panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Installation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Door dimensions (open 115°) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Niche dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

RemoteVision module installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Preparing the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Sliding the appliance into the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Attaching the appliance to the installation niche. . . . . . . . . . . . . . . . . . . . . . . . . . 69

Aligning the Ice/Water Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Attaching the frame and the shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

RemoteVision (optional accessory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

When using the appliance, follow

basic safety precautions, including

the following:

Electrical safety

Before installation, make sure that

the voltage and frequency listed on the

data plate correspond with the

Read all instructions before

installation and use to prevent

accidents and machine damage.

household electrical supply. This data

must correspond to prevent injury and

machine damage. Consult a qualified

electrician if in doubt.

This appliance is intended for

Before installation or service,

residential use only. Use only as

described in this Operating manual.

disconnect the power supply to the

work area by unplugging the unit,

"tripping" the circuit breaker or

removing the fuse.

This appliance is for household use

only. Use this appliance only for its

intended use as described in this

manual. Any other use could be

dangerous.

Do not use an extension cord to

connect this appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance

(e.g., danger of overheating).

This appliance complies with current

safety requirements. Improper use

of the appliance can cause personal

injury and material damage.

Be certain your appliance is

properly installed and grounded by a

qualified technician. To guarantee the

electrical safety of this appliance

continuity must exist between the

appliance and an effective grounding

system. It is imperative that this basic

safety requirement be met. If there is

any doubt, have the electrical system of

the house checked by a qualified

electrician.

Keep these operating instructions in

a safe place and pass them on to

any future user.

Only connect power to the

appliance when all installation and

plumbing work is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Installation

Before making plumbing

connections, ensure the appliance is

This appliance is top-heavy and

must be secured to prevent the

possibility of tipping forward.

Keep the door closed until the

appliance is completely installed

and secured per installation

instructions.

disconnected from the mains electricity

supply.

Do not operate any appliance with a

damaged cord or plug, or if the

appliance has been damaged in any

manner. Contact Miele’s Technical Ser-

vice Department.

Before installing the appliance,

check for externally visible damage.

This appliance must not be used in

a non-stationary location (e.g. on a

Do not operate a damaged appliance.

ship).

This appliance must be installed

and connected in compliance with the

Do not install the freezer in a room

with too low an ambient temperature,

e.g., a garage, as this may lead to the

appliance switching off for longer

periods so that it cannot maintain the

required temperature.

installation instructions.

The appliance must be properly

installed before operation to ensure that

no electrical components are

accessible.

In appliances with an automatic ice

maker, avoid contact with the moving

parts of the ejector mechanism, or with

the heating element located on the

bottom of the ice maker. Do not place

fingers or hands on the automatic ice

making mechanism while the freezer is

plugged in.

Installation work and repairs should

only be performed by a trained

technician in accordance with national

and local safety regulations. Repairs

and other work by unqualified persons

could be dangerous.

Installation must comply with local

plumbing regulations and state laws.

The ice cube maker is not suitable

for connection to a hot water supply.

Connection to the water supply and

Do not use water that is

any repairs to the ice maker must only

be carried out by a suitably qualified

person.

microbiologically or chemically unsafe

or of unknown quality without adequate

disinfection or other treatment before or

after the filter is used; the filter alone is

not an adequate safeguard.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Use

Avoid contact with the moving parts

of the ejector mechanism, or with the

This appliance is not designed for

commercial use. It is intended for use in

heating element located on the bottom

of the ice maker. Do not place fingers

or hands on the automatic ice making

mechanism while the appliance is

plugged in.

domestic households and in similar

working and residential environments

such as:

– shops, offices and similar work

environments

Do not refreeze frozen foods which

have thawed completely.

– by customers in hotels, motels, Bed

& Breakfasts or similar residential

environments.

Do not store or use gasoline or other

flammable vapors and liquids in the

vicinity of this or any other appliance.

This appliance is not intended for

outdoor use.

To avoid serious illness or death, do

not deactivate the water filter display.

The appliance is only intended for

Do not use sharp-edged objects to

residential use to store frozen foods,

freeze fresh foods and prepare ice.

All other uses are prohibited and may

be dangerous.

remove frost and ice, or separate

frozen foods and remove ice trays.

They will damage the evaporator,

causing irreversible damage to the

appliance.

Persons who lack physical, sensory

or mental abilities, or experience with

the machine should not use it without

supervision or instruction by a

responsible person.

Do not use defrosting sprays or

de-icers, as they might contain

substances which could damage the

plastic parts or which could cause a

build-up of gases and pose a danger to

health.

To reduce the risk of injury, do not

allow children to play in, on or near the

appliance, especially in the door hinge

area.

Do not use any oils or grease on the

door seal, as these will cause the seal

to deteriorate and become porous with

time.

After your freezer is in operation, do

not touch the cold surfaces in the

freezer compartment, particularly when

hands are damp or wet. Skin may

adhere to these extremely cold

surfaces.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Do not block the ventilation gaps in

the plinth or the top of the appliance

Disposal of your old appliance

Before disposing of an old

appliance, first make the door latch or

housing unit, as this can impair the

efficiency of the appliance, increase the

electricity consumption and cause

damage to the appliance.

lock unusable.

Take off the door.

Never use a steam cleaner to clean

Leave the shelves in place so that

the appliance. Pressurized steam could children may not easily climb inside.

damage electrical components and

Consult with your municipal policy

cause a short circuit.

on recycling.

Before using the Ice/Water

Be careful not to damage any part of

dispenser it is important to flush the

the pipework while awaiting disposal

lines and clean the part thoroughly.

by:

puncturing the refrigerant

channels in the evaporator.

bending any pipework.

scratching the surface coating.

Splashes of refrigerant can damage the

eyes.

Your old freezer may have a cooling

system that used CFCs

(chlorofluorocarbons). CFCs are believed

to harm stratospheric ozone.

If you intentionally release this CFC

refrigerant, you can be subject to fines

and imprisonment under provisions of

environmental legislation. Make sure the

CFC refrigerant is removed and disposed

of by a qualified technician.

SAVE THESE

INSTRUCTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the freezer

aInterior lighting

gMain switch to turn the appliance

On/Off

bDoor shelf

hFreezer baskets

cIce cube maker

dIce cube container

eInterior shelf

iWater filter

jIce / Water dispenser in the door

kControl panel for Ice / Water

Dispenser

fControl panel for the Freezer

lIce / Water dispenser outlet

mDrip tray with grid and cover

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the freezer

Control panel for freezer

aAccess button "p"

activates the control panel

dOn/Off sensor button for the

Ice/Water dispenser

bTemperature display

X colder; Y warmer

eSensor button for the temperature

and/or door alarm*

Allows you to set the desired

temperature in the freezer

fWater filter change indicator*

cOn/Off sensor button for the

SuperCool function

* Only visible when the relevant

function is activated

Control panel for Ice/Water

Dispenser

aLighting sensor button

bWater sensor button

cIce cube sensor button

dCrushed ice sensor button

eSafety lock sensor button

Download from Www.Somanuals.com. All Manuals Search And Download.

Before use

Before using for the first time

Turning the appliance On/Off

The stainless steel surface of the

appliance is protected with a plastic

film, which protects it during shipping.

^ Open the appliance door.

Do not remove this protective film until

the appliance has been completely

installed.

^ Turn the appliance On/Off with the

After removing the protective film clean

the exterior surface with the supplied

stainless steel agent. This will aid in

preventing resoiling.

main switch.

The main switch is located on the

right-side underneath the control panel.

^ Clean the inside of the appliance and

the accessories with a mild solution

of warm water and liquid dish soap.

Dry with a soft cloth.

Once on, the appliance begins cooling.

When the door is open, the interior

lights come on.

If the appliance was transported or

laid horizontally for any reason, allow

it to stand vertical for at least 8 hours

before turning it on. Failure to do so

will affect the functioning of the

appliance.

The access button will light in the

control panel.

The preset temperatures (factory

default settings) are reached after a few

hours. Do not put any food in the

appliance until the preset temperatures

are reached.

,^{Turning off the appliance with}

the main switch does not safely

isolate it from the power supply.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings

Using the settings

Additional settings

This appliance is operated with the use In the settings mode you can select

of touch keys activated by a finger. and change functions.

– An available button will appear white. In settings mode, certain settings can

be changed. The function possibilities

– A selected button will appear yellow.

are described in the respective

chapters of this manual.

Overview of the selectable function

settings:

^ Touch the access button "p" so it

turns yellow.

Function

Display text

To enter and exit the

Settings mode

On the control panel you will see

additional sensor buttons to operate the

appliance.

Temperature unit

°C - °F

†

These buttons allow you to:

(see "Setting the

temperature")

– adjust the temperature,

– select the SuperCool function, or

– turn the Ice/Water Dispenser On/Off.

RemoteVision Module

settings (optional

accessory)

;

For additional information, see the

Button sound on/off

(see "Settings")

corresponding sections in this manual.

^ To leave the settings menu, touch the

access button "p" so it turns white.

The last settings entered are stored.

If the access button is not pressed

the display will go out after approx.

30 secs.

no function

The other sensor buttons now

disappear from the control panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings

Turning the button sound

On/Off

^ Tap the X button until = appears in

the display.

^ Touch the access button "p" to

confirm.

If you prefer the buttons to be silent

when touched the button sound can be

turned off.

^ By touching the X button, you can

choose between:

= 0 : Button sound is off

= 1 : Button sound is on

= – : Return to menu.

^ Touch the access button "p" so it

turns yellow.

^ Touch the access button "p" to

confirm the setting.

^ Note the position of the X button, but

^ Tap the X button until you see ; in

do not touch.

the display.

^ Touch the access button "p" again so

it turns white.

^ Touch the access button "p".

You have now left the Custom settings

mode.

Only the access button "p" is visible.

^ Place one finger on the position of

the X button and hold (the X button

will not be visible).

Note: the button sound of the

Ice/Water dispenser must be turned

off separately.

^ While holding down the X button,

press the access button "p" once.

Keep holding the X button down until

the following appears in the display

(approx. 5 seconds).

When you are in the Custom settings

mode the door alarm is turned off

automatically. Once the door is

closed it is reactivated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings

Turning off for longer periods

of time

If the appliance is not going to be used

for an extended time (for example,

during a vacation) some precautions

need to be taken:

^ Shut off the water supply line,

(several hours before switching off

the appliance)

^ Take all food out of the appliance

^ Turn the appliance off

^ Unplug the appliance

^ Empty the ice cube container

^ Clean the interior

^ Remove and discard the water filter

(secure the filter cap)

^ Leave the door open to prevent

odors

Download from Www.Somanuals.com. All Manuals Search And Download.

Temperature and door alarm

The appliance is equipped with an

alarm system, to ensure that the

temperature does not rise unnoticed

because of energy loss or an open

door.

Turning the temperature alarm Off

As soon as the alarm condition is

corrected, the alarm signal turns off

and the affected zone stops flashing in

the display. The "alarm" indicator goes

out.

The alarm system is always

operational, it does not need to be

switched on.

Temperature alarm

^ To turn the alarm off early, press

the "alarm" sensor button.

If the temperature becomes too warm,

an alarm sounds and the "alarm"

indicator turns red and flashes and the

temperature flashes in the control

panel.

The alarm signal turns off. The "alarm"

indicator remains on until the alarm

condition is corrected.

If the temperature in the freezer

zone reaches 0°F (-18°C) or higher,

check that food has not defrosted.

The temperature display shows the

highest temperature reached during the

alarm.

The alarm will sound and the display

will flash if:

Door alarm

If the appliance door is left open, an

alarm signal will sound and the "alarm"

indicator will turn red after five minutes.

– too much warm air flows into the

appliance, for example when food is

being loaded, re-arranged, or taken

out.

Once the door is closed the alarm will

turn off and the "alarm" indicator will go

out.

– large amounts of food are being

frozen at once.

Turning the door alarm Off

– the power fails.

To turn the alarm off early:

As soon as the alarm condition is

corrected the alarm with turn off and

the sensor button for alarm will go out.

^ The "alarm" indicator and signal will

turn off.

The alarm will turn off and the "alarm"

indicator will go out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the temperature

Temperature range

The temperature can be set within the

following range:

7°F to -11°F (-14°C to -24°C).

To freeze fresh food and store frozen

food for an extended period of time, a

temperature of 0°F (-18°C) is

suggested.

^ Touch the access button "p" so it

turns yellow.

The room temperature and the

installation location can affect the time it

takes for the appliance to drop to the

coldest temperature. If the room

temperature is too high, it may not be

possible for the appliance to reach the

lowest temperature.

^ Use the X and Y buttons next to the

temperature display to set the

temperature warmer or colder.

Tap the X and Y sensor buttons to

raise/lower the temperature 1°, or hold

it down to move through the

temperature range more quickly.

The temperature display on the

control panel always shows the

desired temperature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the temperature

Temperature unit

^ While holding down the X button,

press the access button "p" once.

Keep holding the X button down until

the following appears in the display

(approx. 5 seconds).

(Fahrenheit/Celsius)

The temperature can be displayed in

degrees Fahrenheit (°F) or Celsius (°C).

^ Touch the access button "p" so it

turns yellow.

^ Tap the X button until † appears in

the display.

^ Note the position of the X button, but

^ Touch the access button "p" to

confirm.

do not touch.

^ Touch the access button "p" again so

it turns white.

^ By touching the X button you can

select either Fahrenheit or Celsius for

the temperature display.

† 0: Fahrenheit

† 1: Celsius

† –: return to menu.

Only the access button "p" is visible.

^ Place one finger on the position of

the X button and hold (the X button

will not be visible).

^ Touch the access button "p" to

confirm the setting.

^ Tap the X button until a ; appears in

the display.

^ Touch the access button "p".

You have left the Custom settings

mode.

When you are in the Custom settings

mode the door alarm is turned off

automatically. Once the door is

closed it is reactivated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the freezer efficiently

Freezing food

Placing food in the freezer

Fresh food should be frozen as quickly

as possible. This helps maintain the

nutritional value, vitamin content,

appearance and taste of the food.

Food to be frozen can be placed

anywhere in the freezer.

The freezer baskets can hold a

maximum of 35 lbs (16 kg) of frozen

food.

Never refreeze partially or fully

defrosted food. Consume defrosted

food as soon as possible, it will lose its

nutritional value and spoil if left for too

long. Do not refreeze defrosted food

unless it has been cooked.

^ Spread the food to be frozen across

the bottom of the freezer basket or

across the shelves, so that it will

freeze through to the core as quickly

as possible.

Before placing food in the freezer

^ When placing items in the freezer,

make sure the packaging and

^ When you are planning to freeze

large amounts of food (more than

4 ½ lbs [2 kg]), switch on the

SuperCool function ahead of time

(see "SuperCool").

containers are dry, to keep them from

sticking together when frozen.

When freezing, try not to let frozen

food come into contact with

unfrozen food, this could cause the

frozen food to defrost.

This will provide the food already in

the freezer with a protective boost of

cold air.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the freezer efficiently

Defrosting

Cooling drinks quickly

Frozen food can be defrosted in

different ways:

To cool drinks quickly, switch on the

SuperCool function. See "SuperCool" for

more information.

– in a microwave oven,

– at room temperature,

Do not leave bottles in the freezer for

more than 1 hour, closed containers

could burst.

– in the refrigerator (the cold given off

by the frozen food helps to keep the

other food cold),

– in a steam oven.

Poultry It is especially important to

observe proper hygiene when

defrosting poultry. Never save the liquid

from defrosted poultry. Drain it away

and promptly wash the container, the

sink and your hands. Danger of

salmonella poisoning.

Fruit should be defrosted at room

temperature in its packaging, or in a

covered bowl.

Most vegetables can be cooked while

still frozen. Simply place directly into

boiling water or hot oil.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the freezer efficiently

Freezing tips

– Do not place hot foods or drinks in

the freezer. This causes already

frozen food to thaw, and increases

the energy consumption

– The following are examples of foods

suitable for freezing:

Fresh meat, poultry, game, fish,

vegetables, herbs, fresh fruit,

pastry/dough, leftovers, and a range

of pre-cooked meals.

considerably. Allow hot foods and

drinks to cool down before placing

them in the freezer.

– The following examples of foods not

suitable for freezing:

Packing tips

^ Unsuitable packing material

- wrapping paper

Lettuce, radishes, sour cream,

mayonnaise, eggs in their shells,

onions, whole raw apples and pears.

- greaseproof paper

- cellophane

– To retain color, taste and vitamin C,

vegetables should be trimmed,

washed, and blanched.

- garbage bags

- plastic shopping bags

To blanch: bring a large saucepan of

water to a boil, then submerge the

vegetables in rapidly boiling water

for 2-3 minutes, depending on type.

Remove, and plunge into ice-cold

water to cool quickly. Drain and pack

for freezing.

Suitable packing material

- plastic freezer bags/wrap

- aluminum foil

- freezer containers

^ To help prevent freezer burn, expel

as much air as possible from

bags, etc., before sealing them.

– Lean meat freezes better than fatty

meat, and can be stored for

considerably longer.

^ Close the packaging tightly with

- plastic clips

- twist ties

– To prevent chops, steaks, cutlets or

rolled meats from freezing together in

solid blocks when packed, separate

with a sheet of plastic freezer wrap.

- rubber bands

^ Mark the package to indicate the

contents and the date of freezing.

– Do not season fresh foods or

blanched vegetables before

freezing. Cooked food can be lightly

seasoned before freezing, but care

should be taken as the taste of some

spices alters when frozen.

Download from Www.Somanuals.com. All Manuals Search And Download.

SuperCool

When the SuperCool function is

activated, the appliance is cooled as

cold as possible (to a factory-preset

temperature).

Switching off SuperCool

The SuperCool function automatically

switches off after approx. 52 hours. The

sensor button turns white, and the

appliance continues running at normal

power.

SuperCool

The SuperCool function is ideal for

freezing large quantities of unfrozen

food. Ideally the function should be

switched on 4 - 6 hours before the food

is placed in the freezer.

To save energy, you can switch off the

SuperCool function once the food is

sufficiently chilled.

If the max. freezing capacity is used,

24 hours are recommended.

This helps food to freeze quickly and

retain its nutrients, vitamins, flavor and

appearance.

^ Touch the SuperCool sensor so that it

turns white.

The temperature display returns to the

original temperature setting.

Switching on SuperCool

The appliance now continues running

at normal power.

^ Touch the SuperCool sensor so that

it turns yellow.

The temperature now begins to fall, with

maximum cooling performance.

The new temperature setting appears in

the display -22°F (-30°C).

Download from Www.Somanuals.com. All Manuals Search And Download.

Ice/Water Dispenser

Using the Ice/Water Dispenser

for the first time

Before using the Ice/Water

Dispenser for the first time, you must

flush then fill appliance water lines

with water.

^ Touch the "water" button until it

flashes yellow.

^ Touch and hold the "water" button

Flushing the lines of the Ice/Water

Dispenser

again.

This activates the flushing function,

which uses approximately 1.6 gallons

(6 liters) of water.

^ Open the freezer door.

You can interrupt the flushing process

at any time to empty the container, by

taking your finger off the "water" button.

During this time, the "water" button will

flash yellow again.

^ Touch the "Access" button so it turns

yellow.

As soon as the flushing process is

complete, you will hear a beep, and the

buttons on the control panel will turn

white.

^ Touch the "ice" sensor button so it

You can now use the Ice/Water

Dispenser.

turns yellow.

^ Close the appliance door.

For the automatic ice/water

dispenser to operate, it must be

connected to the household power

and water supply.

After opening and closing the door,

it may take a few seconds before the

Ice/Water Dispenser is ready for

use.

Use sturdy glass when dispensing

water or ice - risk of injury from

broken glass!

The "water" button on the control panel of

the Ice/Water Dispenser flashes white.

^ Place a large container under the

dispenser.

Keep fingers clear of the dispenser

opening. Risk of injury!

Download from Www.Somanuals.com. All Manuals Search And Download.

Ice/Water Dispenser

Turning on the Ice/Water

Dispenser

Before using the Ice/Water

Dispenser for the first time, you must

flush the water lines.

^ Turn on the Ice/Water dispenser with

a finger touch to the control panel or

by passing your hand under the

dispenser to activate it via the light

sensor.

^ Open the freezer door.

^ Be sure the ice cube container is

All of the touch controls for the

Ice/Water Dispenser should now

appear white.

under the ice maker.

Ice cubes can only be produced if

the ice cube container is completely

closed.

If this is not the case, the Safety Lock is

activated i.e. "lock" will appear yellow.

See "Safety Lock".

If "lock" is blinking, the drip tray

needs to be emptied (see "Cleaning

and care").

^ Touch the "ice" button so it turns

Once the freezer has cooled to a

freezing temperature, the ice cube

maker fills with water.

yellow.

^ Close the freezer door.

The ice/water dispenser is now ready

for use.

Do not place any bottles or food for

rapid cooling in the ice cube maker.

The ice cube maker could become

blocked or damaged.

After opening and closing the door,

it may take a few seconds before the

Ice/Water Dispenser is ready for use

and the touch controls can be used

again.

Discard all ice cubes, crushed ice

and water produced during the first

24 hours after switching on the

ice/water dispenser. The water is

used for the initial flushing of the

water supply.

This applies to the first use, as well

as when the appliance has been out

of service for a long time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ice/Water Dispenser

Dispensing water

Release the button when the jar is

almost full. Ice in the discharge may

cause the cup to overflow or block

the discharge.

^ Place a suitable cup on the drip tray

under the ice/water dispenser.

The ice cube maker can produce

approx. 150 ice cubes within 24 hours.

Note: Ice production will vary due to

your water supply temperature,

^ Press and hold the "water" button.

As long as you hold in the "water" button, pressure and hardness.

water will flow from the dispenser.

The amount of ice cubes produced

After a period of time the water flow will depends on the temperature in the

automatically stop. If more water is

freezer section. The lower the

needed press the "water" button again.

temperature, the more ice cubes will be

produced in a given period of time.

If you would like the water colder,

place ice cubes in the glass before

dispensing water.

As soon as the drip tray indicator

signals that the drip tray is full, the

current operation will automatically

stop.

Dispensing (crushed) ice

Empty out the drip tray using a

sponge or dish towel.

After the initial start-up it may take

up to 24 hours for the first ice to be

produced.

The ice dispenser produces a max. of

150 ice cubes per 24 hours.

^ Place a suitable cup on the drip tray

The production volume of ice depends

on the temperature in the freezer. The

lower the temperature the more ice that

will be produced in a certain period of

time.

under the dispenser.

If the "lock" flashes the drip tray

needs to be emptied and the

dispensing is automatically stopped.

Empty the drip tray using a sponge

or towel.

^ Press and hold the "cubes" or

"crushed" button.

As long as you hold in the desired

button, ice will fall from the dispenser.

After a while dispensing will stop

automatically. Press the sensor again if

you need more ice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ice/Water Dispenser

If the ice/water dispenser is not used

for more than 2 minutes or the

freezer door is opened, Standby

mode is activated and the lighting

for the ice/water dispenser will go

out.

If the Ice/Water dispenser is not

used for longer than 2 minutes, it

switches into standby mode, and the

Ice/Water dispenser lighting turns

off.

When used again, it will take a few

seconds for the water and ice to be

dispensed.

Turning off the Ice/Water

dispenser

The water supply line must be shut

off several hours before the

appliance or ice maker is switched

off.

Safety lock

The Ice/Water dispenser can be locked

to prevent unwanted use.

^ Open the freezer door.

^ Touch the "lock" button so it turns

yellow.

^ Touch the sensor button for the ice

maker so that it turns white.

The Ice/Water dispenser buttons are

now locked.

To unlock the buttons:

^ Touch the "lock" button so it turns

white.

Lighting

In order to turn the Ice/Water dispenser

lighting on or off:

^ Touch the "light" button so it turns

yellow (lighting on) or white (lighting

off).

Download from Www.Somanuals.com. All Manuals Search And Download.

Ice/Water Dispenser

Settings

Anti-condensation heater

The following settings on the Ice/Water

dispenser can be adjusted:

A heater behind the control panel of the

Ice/Water dispenser ensures that frost

and ice do not build-up. To save

Entering the settings mode

energy, you can turn the heater off.

This feature is turned off by factory

default.

To turn the anti-condensation heater on:

^ Touch and hold the "lock" button so

that it appears white.

^ Touch the "water" button until it turns

yellow.

^ At the same time tap the "light" button

(do not hold down).

^ Hold the "lock" button for approx. 4

seconds until the "lock" and "light"

buttons turn yellow.

The lighting color of other buttons

indicates their On/Off setting.

Yellow (On)

White (Off)

^ Release both buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ice/Water Dispenser

Anti-clumping

Button sound

The anti-clumping feature ensures that

crushed ice or ice cubes do not freeze

together. A noise will be heard

If you prefer the buttons to be silent

when touched, the button sound can be

turned off.

periodically to indicate that the feature

is working. If the sound disturbs you,

the feature can be turned off.

This feature is turned on by factory

default.

To turn button sound off:

Note: Disabling the anti-clumping

feature can result in the formation of

ice clumps in the dispenser.

This feature is turned on by factory

default.

^ Touch the "crushed" button until it

turns white.

To turn the anti-clumping feature off:

Exiting the settings mode

^ Touch the "cubes" button until it turns

^ Touch the "light" button or do not

white.

touch any buttons for one minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

Automatic defrost

The freezer defrosts automatically.

The moisture generated in the

appliance collects in the evaporator. It

is automatically defrosted and

dissipated by the condenser

periodically.

This automatic defrosting system

enables the freezer to remain

permanently ice-free, while ensuring

that the food stored in the freezer stays

frozen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the interior fittings

Moving the shelves

Door shelf

The shelves can be adjusted according For easier loading, unloading and

to the height of the food.

cleaning the door shelf can be shifted

or completely removed.

^ Using both hands, grasp the shelf

from underneath and lift slightly so

that the rear of the shelf is slightly

above the mountings.

^ Using both hands, grasp the door

shelf by the frame, lift it upward a bit,

then tip it slightly forward.

^ Pull the shelf forward.

^ Slide the tipped shelf up or down

along the side-rails, and click it back

into place at the desired location.

^ Move the shelf to the desired height,

then insert the (rear) hooks into

place.

^ Make sure that the basket is level.

^ Make sure the shelf is level.

Removing the door shelf:

^ Slide the shelf upwards all the way to

the top of the side-rails until it can be

removed.

Replacing the door shelf:

^ Insert the freezer basket at the top of

the side-rails and slide it down into

the desired position.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the interior fittings

Freezer baskets

Replacing the freezer basket

For easier loading, unloading, and

cleaning, the freezer baskets can be

shifted or completely removed.

^ Fully extend the telescopic tracks.

^ Lay the basket onto the tracks so that

it connects in the front and back.

^ Pull the basket forward until

^ Turn the safety lock back to the

resistance is felt.

vertical position.

On the hinged-side of the door is a

safety lock, which must be turned to a

horizontal position before the drawer

can be removed.

^ Slide the freezer basket in.

^ Using a suitable object, turn the

safety lock to a horizontal position a.

^ On both sides of the basket, pull the

latches b upward and lift the basket

out of the freezer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

To better maintain your appliance

avoid the following:

To reduce the risk of electrical

shock, disconnect the appliance

from the power supply by shutting

off the power main, tripping the

circuit breaker or unplugging the

power cord before maintenance.

– cleaners containing soda, ammonia,

thinners, or chlorides

– cleaners containing descaling

agents or lime removers,

– abrasive cleaners,

Never use cleaning agents

– dishwasher soap (powder),

– caustic (oven) cleaners,

containing abrasive substances

such as sand, soda, acids, chlorides

or chemical solvents.

– scouring pads, steel wool, hard

brushes,

Non-abrasive cleaning agents are

also unsuitable, as they can cause

matte areas to appear.

– metal scrapers,

– eraser sponges,

Stainless steel surfaces can be

cleaned using a non-abrasive

stainless steel cleaner (available

from Miele).

– steam cleaning products.

Glass cleaners may be used to

clean the exterior. However do not

allow them to sit or "puddle", this can

cause damage to the surface.

Remove the cleaner promptly.

Only use a mild solution of warm

water and liquid dish soap to clean

this appliance.

Do not use a steam cleaner to clean

this appliance. Pressurized steam

could penetrate electrical

components and cause a short

circuit.

Do not allow water to get into the

electronic unit or lights.

The data plate located inside the

appliance must not be removed. It

contains information which is

required in the event of a service

call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Before cleaning

Cleaning the interior and

accessories

Use a mild solution of warm water and

liquid dish soap. Wash all accessories

and drawers by hand. Do not wash in a

dishwasher.

^ Use the main switch to turn the

^ Clean the appliance as needed.

appliance off completely.

^ After washing, wipe down the interior

and accessories with a clean wet

cloth, then dry with a soft cloth.

Leave the appliance door open for a

short time, so the moisture can

evaporate.

The main switch is located on the right

side underneath the control panel.

^ Unplug the power cord.

^ Remove any food from the appliance

and store it in a cool place.

^ Take out any removable parts,

e.g., shelves, baskets.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Appliance door

Ice cube container

^ Stainless steel surfaces can be

cleaned using a non-abrasive

stainless steel cleaner.

^ Pull out the ice cube container.

^ Empty and clean the ice cube

container with lukewarm water.

^ To help prevent resoiling, a

conditioner for stainless steel can

also be used. Apply sparingly with

even pressure.

^ Thoroughly dry the container and the

anti-clumping screw to prevent new

ice cubes from sticking.

^ To re-insert push the ice cube

container all the way back onto the

supports until it locks into position.

Aluminum frames

The frames of the door bins and

shelves are made of aluminum.

^ If the container cannot be pushed all

the way back, twist the anti-clumping

screw in the container.

^ Clean with a mild solution of warm

water and liquid dish soap.

Drip tray

Aluminum is susceptible to

scratches and nicks, treat with care.

The drip tray collects excess water.

The aluminum frames may become

discolored or otherwise altered if

soiling is not cleaned away

promptly.

As soon as the drip tray is full, the "lock"

button on the Ice/Water dispenser

control panel will flash. A sensor

located in the drip tray detects when

the drip tray is full.

Do not use stainless steel cleaners;

lime removers; scouring pads, such

as pot scrubbers; or used sponges

that still contain abrasive cleanser

residue to clean the frames.

The drip tray must be emptied and

cleaned. However, to prevent odors,

the drip tray should be cleaned daily.

When the "lock" button flashes yellow:

^ Remove the drip tray cover.

^ Empty and clean the drip tray using a

sponge or kitchen towel.

^ Replace the tray cover.

The "lock" button is now white again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Ventilation slits

After cleaning

^ Check the ventilation slits in the base ^ Return all shelves and accessories.

panel regularly. Remove any

^ Plug in the appliance and turn it on

dirt/dust with a vacuum cleaner or

with the main switch.

brush. Clean as needed.

^ Switch on the SuperCool function.

The freezer section will cool down

Door seals

quickly.

Do not use any oils or grease on the

^ Once the temperature is cold

door seals. This may cause the

enough, place the freezer baskets

seals to deteriorate and become

containing the frozen food into the

porous over time.

freezer.

^ Turn off the SuperCool function on a

temperature of 0 °F (-18 °C) is

reached.

^ Clean the door seals with warm water

and dry thoroughly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Changing the light bulb

Never touch a halogen bulb with

bare fingers.

The lighting automatically switches off

after the door has been open for

When inserting a glass halogen bulb

always hold with a soft cloth.

approx. 10 minutes. This is not a fault.

If the light does not come on when the

door is opened briefly, the light bulb

should be changed.

^ Use the main switch to turn the

appliance off.

To reduce the risk of electric shock,

disconnect the appliance from the

power supply by unplugging or

tripping the circuit breaker.

^ Remove the defective light bulb.

^ Place the new bulb in the socket.

Halogen bulb type:

Upper lighting

20 W/12 V/socket GY 6.35.

^ Slip the rear of the light cover back

into position, then pull it forward and

into place.

^ Grasp the front of the light cover with

both hands, and slide it back.

^ Carefully pull the cover forward and

out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Side lighting

Ice/Water Dispenser lighting

Do not remove the light cover for the

dispenser lighting. Should the

lighting covers be damaged or need

to be removed due to damage, do

not look directly or with an optical

instrument at the lighting.

The lighting automatically switches off if

the dispenser is not used for an

extended period of time. This is not a

fault.

^ Turn the light cover counterclockwise

and pull out.

If the light does not come on when the

dispenser is used again, the light bulb

should be changed.

Never touch a halogen bulb with

bare fingers.

When inserting a glass halogen bulb

always hold with a soft cloth.

The dispenser lighting should only

be repaired or replaced by Miele

Technical Service.

^ Pull the defective light bulb from the

socket.

^ Place the new bulb in the socket.

Halogen bulb type:

5 W/12 V/socket G 4.

^ Put the light cover back on and turn

clockwise into place.

^ Restore power to the appliance.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water filter

The Appliance is supplied with an

active charcoal filter which improves

the taste and smell of ice cubes by

removing chlorine and other

substances from the incoming tap

water.

Note:

– After installing a new water filter and

switching on the ice maker, discard

the first 24 hours' worth of ice

production.

– If the ice maker has not been used

for a prolonged time discard any ice

cubes in the freezer, empty the

container and discard the ice

Additional water filters are available

from Miele.

production of the next 24 hours.

It is important to change the water

filter regularly.

– If the appliance or ice maker have

not been routinely used for several

weeks or months, or if the ice cubes

have an unpleasant odor, change

the water filter.

To avoid serious illness or death, do

not use water that is

microbiologically or chemically

unsafe or of unknown quality without

adequate disinfection or other

treatment before or after use of a

filter.

Water filter change indicator

The change indicator will appear

approx. every 6 months depending on

the quantity of ice produced.

– When the filter indicator lights red,

this is an indication that a filter

change will soon be necessary.

New water filters (Bypass and Active

charcoal filters) are available from

Miele.

^ When the filter indicator flashes red in

the display the filter must be

changed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water filter

Exchanging the water filter

Note: Air trapped in the system may

cause water and the filter cartridge

to eject forcefully. Use caution when

removing.

^ Remove the cap from the used filter,

^ Take a new filter cartridge out of the

packaging and remove the protective

cap.

^ Push the cap onto the new filter

cartridge, 4.

^ Push in and rotate the filter cap on

the base panel of your appliance

counterclockwise 180°, 1.

^ Pull the used filter cartridge out of the

appliance, 2.

^ Push the filter cartridge with cap, in a

horizontal position, all the way into

the opening in the base panel, 5.

^ Rotate the filter cartridge clockwise

180° until the cap is in a horizontal

position, 6.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water filter

Using an external water filter

If your household water supply already

has an external water filter installed,

leave the standard water filter (bypass

cartridge) installed in the appliance.

^ After the filter change the filter

indicator in the display still flashes.

The change must be be confirmed in

the electronic.

Confirming the filter change

^ Press and hold the filter change

sensor button.

^ At the same time place a finger on

the access button. Press and hold

both sensor buttons for approx. 5

seconds until a beep is heard.

The water filter change has been

confirmed and the filter change

indicator had been reset.

The filter change indicator goes out.

^ Close the door.

After installing a new water filter

discard the first 24 hours of ice

production.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water filter

State of California

Department of Public Health

Water Treatment Device

Certificate Number

06 - 1775

Date Issued: March 10, 2006

Date Revised: April 3, 2008

Trad

mark/Mod

Designation

eplacement Elements

9000 077095

9000 077104

07134220

Miele 07134220

Manufacturer: Cuno, Incorporated

wat

r tr

atm

nt d

(s) list

d on th

s c

cat

hav

t th

irements pursuant to Section

116830 of th

th and Saf

ty Cod

for th

th relat

d contami

nants:

crob

Cysts

Turbidity

an c Contam

None

Contam

nants and Turb

Inor

ganic/Radiological Contaminants

None

inants

Rat

d S

Capacity: 740 gals

0.75 gpm

ow:

Rat

on:

d S

Cond

ons of C

rtificati

Do not use where water is microbiologically unsafe or with water of unknown quality, except that systems certified for

cyst reduction may be used on disinfected waters that may contain filterable cysts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water filter

Performance Data Sheet For Filter Model 07134220

Using Replacement Cartridge 07134220

This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances

listed below. The concentration of the indicated substances in water entering the system was reduced to a

concentration less than or equal to the permissible limit for water leaving the system, as specified in

NSF/ANSI 42 and 53.

Note that while the testing was

performed under standard

laboratory conditions, actual

performance may vary.

System tested and certified by NSF International in Model 07134220

against NSF/ANSI Standard 53 for the reduction of Cysts and

Turbidity and against Standard 42 for the reduction of Chlorine Taste

and Odor; Nominal Particulate Class I.

To a capacity of 739.68 gallons (2800 liters).

Substance

Average

Inﬂuent

Concentration

Inﬂuent Challenge

Concentration

mg/L

Product

Water

Concentration Reduction

Average Maximum Permissible

Max.

Min. %

NSF

Test

Product Water

Concentration

Efﬂuent Reduction

Cysts*

166500 Minimum 50,000/L

99.99

97.09

99.95

99.99

95.42

516458-05

516456-05

Turbidity

10.7

11 + 1 NTU

0.31

0.5 NTU

0.49

Particulate

Class I Particle size:

> 0.5 to < 1 um

Chlorine taste

and odor

At least 10,000

particles/ml

5700000

1.9

30583

0.05

99.52

97.3

> 85%

> 50%

69000

0.06

98.9

511079-03

511081-03

2.0 mg/L 10%

96.84

* Based on the use of Cryptosporium parvum oocysts

IMPORTANT: Must be installed and operated

in accordance with application guidelines.

Application Guidelines/Water Supply Parameters

Water pressure

Water temperature*

Service ﬂow

30- 120 psi (207 - 827 kPa)

33°F - 100°F (0.6°C - 38°C)

0.75 gpm (2.83 lpm)

Failure to do so may void warranty.

Change filter at least every 6 months.

Flush new cartridge for 3 minutes.

CAUTION: To avoid property damage due to water

leakage, you MUST read and follow these operating

instructions before installation and use of this

product.

For estimated costs of replacement

elements please visit your local appliance

dealer or parts distributor.

WARNING: Do not use with water that is

microbiologically unsafe or of unknown quality

without adequate disinfection before or after the

system. Systems certified for cyst reduction may be

used on disinfected waters that may contain filterable

cysts.

NSF is a registered trademark of NSF International.

CUNO is a trademark of 3M Company used under license.

Download from Www.Somanuals.com. All Manuals Search And Download.

Lead free certificate

This product F 1471 SF (KIMIWD18US) is tested and certified by WQA against

ORD0902 for California "lead free" compliance.

Miele & Cie. KG

Carl-Miele-Straße 29

D-33332 Gütersloh

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

With the aid of the following guide minor problems can be corrected without a ser-

vice call.

Repairs should only be carried out by a qualified and trained person in strict

accordance with local and national safety regulations. Unauthorized repairs

could cause personal injury or machine damage and may void the warranty.

Problems with temperature

Issue

Possible fault

Solution

The freezer

does not get

cold.

The machine is not turned Check whether the appliance is

on.

turned on at the main switch. The

access button must be lit up.

The machine is not

plugged in.

Check that the plug is correctly

inserted in the power outlet.

Check that the fuse has

not tripped.

Reset the circuit breaker.

If the breaker trips again the

appliance or the outlet may be

defective. Contact Miele or a

qualified electrician.

The temperature is set

incorrectly.

Check the display.

The

Select a warmer

See "Selecting the correct

temperature".

temperature is temperature.

too low.

The SuperCool function is SuperCool automatically shuts off

still on.

after 52 hours.

The door is not closed.

Check that the door has been

closed properly.

A large amount of food is This makes the compressor run

being frozen at the same longer, causing the temperature to

time. fall automatically.

The freezer is

too warm.

The room temperature is Raise the temperature of the room.

lower than the ambient Operating the appliance in a room

temperature for which the that is too cold will cause the

appliance is designed.

cooling system to switch off for too

long, causing the freezer section to

become too warm.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

General problems

Issue

Possible fault

Solution

Water is flowing out of Close the shut-off valve immediately.

the appliance.

Check whether the water

pipe in the appliance is

defective.

Contact Miele Technical

Service.

Check whether the water

pressure is too low.

Contact a plumber.

Check whether the correct Self-tapping valves and

water valve has been

installed.

3/16" (4.76 mm) saddle

valves reduce the water

pressure and can block

the pipe.

The door will not

open.

This is not a fault.

Wait a few minutes, then

try again. It should now

open without force.

The suction caused by

opening and closing the

door too many times in

succession prevents it

from opening.

The compressor kicks The ventilation slits are

Clean with a vacuum or

brush.

on very frequently and covered or dusty.

for too long.

The door has been

Once the freezer gets

opened too frequently, or a down to the set

large amount of unfrozen

food has been put in at

once for freezing.

temperature the

compressor will turn off.

The door is not closed.

Check that the door has

been closed properly.

The freezer runs

continuously.

To save energy the compressor runs at a lower speed,

but for longer when less cooling is required.

The temperature

This is not abnormal. When the ice maker is in use and

reading in the freezer the temperature of the room is above freezing the

shows -18°C, although temperature automatically stays at -18°C to ensure

a higher temperature proper functioning.

is set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

Alarm / Indicator warnings

Issue

Possible fault

Solution

The alarm is going off.

The appliance door(s)

have been open for

longer than 5 minutes.

Close the door.

The alarm is ringing and The door is not closed.

Once the alarm condition

has been corrected, the

alarm will turn off and the

"alarm" indicator will go

out.

the "alarm" indicator is

A large amount of fresh

flashing.

food is being frozen at the

same time.

There has been a power

failure.

The temperature indicator

will indicate the highest

temperature reached

during the alarm. Check

that food has not

defrosted.

The filter display is red. This is a warning that the Order replacement filters

water filter needs to be

changed soon.

from Miele.

The filter display is

flashing red.

The water filter needs to

be changed.

See "Exchanging the

water filter".

The "Lock" indicator

flashes in the display.

The drip tray for the

Ice/Water Dispenser is

full.

Empty the drip tray by

soaking up the water with

a sponge or dish cloth.

The control panel has

fogged up.

The heating element

behind the panel is

turned off.

See "Anti-condensation

heater" for more

information.

Problems with the ice/water dispenser

Issue

Possible fault

Solution

The ice maker will not

switch on.

The appliance is not

plugged in.

Check that the appliance

is connected to the power

supply.

After turning on the

This is not a fault. After opening and closing the door

Ice/Water dispenser it is it can take a few seconds to operate.

not working.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

Problems with the ice/water dispenser

Issue Possible fault

Solution

The ice maker is When the appliance is turned on for the very first time, it can

not producing take up to 10 hours for the first ice cubes to drop out of the ice

any ice. cube maker and collect in the container.

The appliance is not turned on.

Check that the appliance

is switched on.

The water supply line was not

primed (purged of air) before the

appliance was used for the first

time.

Contact Miele.

Check if:

See "Ice/Water

Dispenser" and/or

"Plumbing" for more

information.

– the Ice/Water dispenser is

switched on.

– the Safety Lock is turned on.

– the water supply line is open.

– there are ice cubes stuck

together and blocking the exit.

– the ice cube container is in the

right position.

– the freezer compartment

temperature is too high.

– the water pressure is too low. The

water pressure must be between

25 and 120 psi (1.72-8.25 bar).

Check whether the correct water

valve has been installed.

Self-tapping valves and

³/₁₆" (4.76 mm) saddle

valves reduce the water

pressure and can block

the pipe.

Check if the Anti-clumping feature See "Anti-clumping".

is activated. This will ensure that

crushed ice or ice cubes do not

freeze together.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

Problems with the ice/water dispenser

Issue

Possible fault

Solution

The ice cubes are Other domestic appliances Avoid using such items as a

small.

that use water are in

operation.

dishwasher, washing

machine or shower at the

same time.

Check whether the water

filter needs changing.

See "Water filter" for more

information.

Check the water pressure.

The water pressure must be

between 25 and 120 psi

(1.72-8.25 bar).

Consult a plumber.

Check whether the correct

water valve has been

installed.

Self-tapping valves and ³/₁₆"

(4.76 mm) saddle valves

reduce the water pressure

and can block the pipe.

The Ice/Water has When ice is stored for an

Use the ice maker more

frequently.

an unpleasant

odor/flavor.

extended period it may

absorb odors, which affects

the taste.

Check if the ice cube

container is dirty.

Clean the container.

Unsealed packages in the

freezer will transfer

odor/flavor particles to the

ice cubes.

Check that food has been

packed in airtight

containers.

The Ice/Water

dispenser is not

producing ice or

water.

The Safety Lock is activated. See "Ice/Water Dispenser -

Safety Lock".

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

Problems with the ice/water dispenser

Issue

Possible fault

Solution

The ice maker is not

producing enough ice

or the ice cubes are

misshapen.

Check the water

Contact a plumber.

pressure. The water

pressure must be

between 25 and 120 psi

(1.72-8.25 bar).

Check that the freezer

temperature is not too

high.

See "Selecting the correct

temperature".

Change the water filter.

See "Water filter".

The Ice/Water dispenser The appliance is not

Check that the appliance

is connected to the power

supply.

does not appear to be

running.

plugged in.

Check that the freezer is See "Plumbing".

connected to the water

supply.

The freezer temperature See "Setting the

is too high.

temperature".

Ice is forming in the

supply hose to the ice

maker.

Check the water

Contact a plumber.

pressure. The water

pressure must be

between 25 and 120 psi

(1.72-8.25 bar).

Check whether the

See "Selecting the correct

temperature".

freezer compartment

temperature is too high.

A noise is heard

The Anti-clumping feature See "Anti-clumping" for

is activated. more information or to

deactivate.

periodically from the

Ice/Water Dispenser.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

The appliance is making noises.

Issue

Possible fault

Solution

Brrrrr...

Humming noise made by the

compressor. This noise can get

louder for brief periods when the

motor is switching on.

These noises are not a

fault.

The noise of the

compressor and the

coolant circulating in

the system is

Blubb, blubb...

Click...

A gurgling noise can be heard

when coolant is circulating

through the pipes.

unavoidable.

Clicking sounds are made when

the thermostat switches the

compressor on and off.

Sssrrrrr...

On multi-zone and frost-free

appliances you can sometimes

just hear the movement of air

circulating inside the appliance.

Creaking

Creaking sounds can be heard

when material inside the appliance

expands.

Rattling, vibrating The appliance is uneven.

Realign the appliance

using a level, by

raising or lowering the

screw feet underneath

the appliance.

The appliance is touching another Move it away.

appliance or piece of furniture.

Drawers, baskets or shelves are

unstable or sticking.

Check all removable

items and refit them

correctly.

Bottles or containers are unstable Separate them.

or knocking against each other.

The transport cable clips are

hanging loose at the back of the

appliance.

Remove the clips.

Download from Www.Somanuals.com. All Manuals Search And Download.

After sales service

In the event of a fault which you cannot MieleCare

easily fix yourself, please contact the

(USA only)

Miele Technical Service Department at

the address on the back of this booklet. MieleCare, our Extended Service

Contract program; gives you the

When contacting the Technical Service

assurance of knowing that your

department, please quote the model

appliance investment is covered by 5

and serial number of your appliance

years of worry-free ownership.

given on the data plate inside the

MieleCare is the only Extended Service

appliance.

Contract in the industry that guarantees

repairs by a Miele Authorized Service

Provider using genuine Miele parts.

Only genuine Miele parts installed by

factory-trained professionals can

guarantee the safety, reliability and

longevity of your Miele appliance.

Please note that unless expressly

approved in writing by the Miele Ser-

vice department, Extended Service

Contracts offered by other providers for

Miele products will not be recognized

by Miele. Our goal is to prevent

unauthorized (and untrained) service

personnel from working on your Miele

products, possibly doing further

damage to them, you and/or your

home.

To learn more about MieleCare

Extended Service Contracts, please

contact your appliance dealer or visit

us online at:

http://mieleusa.com/mielecare

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation instructions

Information is subject to change. Please refer to our website to obtain the most

current product specification, technical & warranty information.

To prevent accidents

and machine damage

read these instructions

before

installation or use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Caring for the environment

Disposal of packing materials

Disposal of an old appliance

The cardboard box and packing

materials are biodegradable and

recyclable. Please recycle.

Old appliances contain materials that

can be recycled. Please contact your

local recycling center about the

possibility of recycling these materials.

Ensure that any plastic wrappings,

bags, etc., are disposed of safely and

kept out of the reach of babies and

young children. Danger of suffocation!

Before discarding an old appliance,

disconnect it from the electrical supply

and cut off the power cord to prevent it

from becoming a hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Installation site

Have the appliance installed by a

qualified technician, according to

the enclosed installation instructions.

The appliance should be installed in a

dry, well ventilated room.

Do not install the appliance:

- outdoors,

WARNING

- in an environment with dripping

water,

This appliance is top-heavy and

must be secured to prevent it from

tipping forward.

- in rooms which are at risk of frost.

Keep the door closed until the

appliance is completely installed

and secured as per the installation

instructions.

The installation location should not be

exposed to direct sunlight, nor near a

heat source, such as an oven,

radiator, etc.

The ambient temperature should not

drop below 55°F (13°C) or rise above

110°F (43°C), otherwise malfunctions

may occur.

Empty weight of your machine:

F 1471 SF . . . . . . . . . . 364 lbs (165 kg)

If installation next to a heat source is

unavoidable observe the following

minimum distances from the heat

source:

– 1 ¹/₄" (3 cm) from an electric cooktop

or electric oven.

– 12" (30 cm) from a gas or oil

cooktop, range or oven.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Base

Ventilation

A fully loaded appliance is very heavy.

The load-bearing capacity of your floor

must meet the following requirements.

The approx. weight of a fully loaded

machine is:

The air intake and outlet must not be

blocked or covered in any way. They

also need to be dusted/cleaned on a

regular basis.

Installation niche

F 1471 SF . . . . . . . . . . 558 lbs (253 kg)

To ensure safe, trouble-free installation

and the best possible cosmetic result,

check to be sure that the installation

space complies with the installation

dimensions. See "Niche dimensions".

To ensure that the appliance is installed

securely and functions properly, the

base must be flat, level and made of a

hard, rigid material.

If in doubt, contact Miele.

The side walls of the installation cavity

must be plumb.

Furniture/fixtures

The minimum thickness of the side

walls and the top wall must be ⁵/₈"

(16 mm).

The new appliance will be mounted

securely to adjacent and overhead

furniture/fixtures.

The minimum thickness of the toe-kick

panel must be ½" (13 mm). A thickness

of ³/₄" (19 mm) is recommended.

For this reason it is essential that all

attachable furniture/fixtures are

connected securely to the base or the

wall by suitable means.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Stainless steel panels

Side-by-side

Stainless steel door panels and toe-kick This appliance can be installed

covers are available from Miele.

"side-by-side" with another

fridge/freezer using a "Merging Kit".

Installation options

The "Merging Kit" is available from

Miele.

There are many different installation

options. You are limited only by the

design of the kitchen.

Contact Miele or your dealer for

specific information about which

combinations will work with your

appliance.

The door hinge cannot be

exchanged.

For instructions on how to attach the

appliances and install the heating

mat, please refer to the instructions

included with the "Merging Kit",

available from Miele.

Single column

The appliance can be installed at any

preferred location in the kitchen.

However, be sure the door will open

and close properly in the chosen

location.

Installation without a partition using

the "Merging Kit"

If the appliances are installed directly

next to each other (without a partition),

they need to be attached together

using the "Merging Kit".

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Installation with partition using the

"Merging Kit"

Side panels

If one side of the appliance is visible, a

side panel must be used.

The minimum thickness of the partition

is ⁵/₈" (16 mm).

The side panel must be firmly secured

to the wall, the floor and the overhead

furniture/fixtures before the appliance is

placed in the cavity.

The dimensions of the side panel are

taken from the opposite wall of the

installation space. During installation,

ensure that the cavity is square and the

measurements are correct.

If there is a partition with a thickness

from ⁵/₈" (16 mm) to 6 ⁵/₁₆" (160 mm)

between the adjacent appliances, then

each appliance should be individually

installed within its own niche using the

mounting accessories included.

The "Merging Kit" will also be needed.

The "Merging Kit" is available from

Miele.

Installation with partition without

using the "Merging Kit"

If there is a partition with a thickness of

more than 6 ⁵/₁₆" (160 mm) between

the adjacent appliances, then each

appliance should be individually

installed within its own niche using the

mounting accessories included (the

"Merging Kit" is not necessary).

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Door dimensions (open 115°)

F 1471 SF

20 11/16" (525 mm)

9 3/16" (234 mm)

Miele recommends using the full door opening angle of 115° for this freezer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Niche dimensions

F 1471 SF

18 ½" (469.8 mm)

18" (457 mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Power supply and water connection

1. Power supply

2. Water connection

F 1471 SF

9" (229 mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Before you begin

Tools needed for installation

– Cordless screwdriver

– Torx screwdriver

– Hammer drill

Read these instructions completely

and carefully.

Have the appliance installed by a

qualified technician, according to

the enclosed installation instructions.

– Wood drills in different sizes

– Hammer

To reduce the risk of injury or

damage to the product, two people

should be used for installation.

– rachet 5/16" (8 mm)

– Adhesive tape

– Multi-grip pliers

– Level

These installation instructions are

intended for use by qualified installers.

In addition to these instructions, the

appliance must be installed in

– Tape measure

– Square

accordance with all local codes, or in

the absence of a local code.

When fastening the cabinet to the wall

behind it (see "Installing the appliance")

use:

– In the USA, in accordance with the

National Electric Code,

ANSI/NFPA 70 - latest edition/State

and Municipal codes and/or local

codes.

– suitable plugs/screws depending on

the type of wall.

– several mounting brackets, if required.

– In Canada, in accordance with the

Canadian Electric code C22.1 - latest

edition/Provincial and Municipal

codes and/or local codes.

Other

– Stepladder

– Dolly, hand truck

– Wooden beam (cross section

min. 3" x 4" [75 mm x 100 mm] as an

alternative tilt protection, length

depends on the width of the

installation cavity)

– Wood screws in different sizes

Optional accessories

– "Merging Kit" for side-by-side installation

– RemoteVision module for wireless

monitoring

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Aligning the housing unit

Check the installation niche

To ensure a safe, trouble-free

installation and the best possible

cosmetic result, check to be sure

that the installation space complies

with the installation requirements.

^ Check the base (see "Installation").

^ Check the dimensions of the cavity.

^ Check that the cavity is square.

^ Check the location of the power

outlet.

^ Check the location of the water

connection (see "Plumbing").

^ Check that all furniture parts in the

vicinity of the appliance are securely

connected to the wall.

The housing unit must be carefully

aligned using a spirit level before

installing the appliance. The unit

corners must be at right angles, as

otherwise the furniture door will not

align correctly with the 4 corners of the

appliance.

^ Check that the adjacent

furniture/fixtures do not collide with

the open door.

– The side panels of the housing must

be even.

Before installation

,^{Caution - the appliance is very}

heavy. Use caution when unpacking

and opening the door, danger of

tipping.

– The housing unit panels must be at

least 16 mm thick.

– The plinth facing must be at least 13

mm thick (or preferably 19 mm).

^ To protect the base from damage

during installation, attach a hard

board, linoleum, etc., to the floor in

front of the intended installation

location.

^ Take the supplied accessories out of

the protective packaging.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

RemoteVision module

installation

There are transportation safety

devices inside the appliance to

protect the shelves and storage

compartments until installation is

complete. Do not remove them, or

parts may be damaged.

(optional accessory)

Always disconnect the appliance

from the power supply when

performing installation, maintenance

or service work.

^ Check the appliance for damage in

Install the RemoteVision module

before placing the appliance in its

installation niche.

transit.

Do not install the appliance if it is

visibly damaged. If in doubt, contact

your dealer.

Once connected the RemoteVision

module will increase the energy

consumption of the appliance.

The slot for the RemoteVision module is

located in the lower area of the back of

your appliance.

^ Loosen the bracket that holds the

appliance to the pallet.

Caution! The appliance is no longer

secured and may be unstable.

^ Unscrew the screws a on the cover

b and pull off the sticker c.

^ From the rear of the appliance

carefully lift it from the pallet.

^ Remove the cover b.

Once the appliance is on the ground it

can be wheeled around.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

^ Push the module into the slot until it

locks into place.

^ Pull the antenna d straight out.

^ Connect the appliance to the power

supply and turn it on. After several

seconds the indicator light e will

come on.

^ Guide the cover b over the antenna

d and screw on the cover.

^ Angle the antenna d so that it faces

to the right or left.

The indicator light will display different

colors one after the other; any control

light at the end indicates that the

module was correctly installed.

If necessary, disconnect the power

supply and continue installing the

appliance.

If the indicator light does not come on,

installation of the module was

Preparing the installation

niche

unsuccessful. In that case, repeat the

process. If that does not correct the

problem, contact Miele.

,^{Keep the appliance door closed}

until it is securely fastened in the

niche. Tipping hazard.

Because of the size and weight of

the appliance, it is essential to

ensure that the appliance cannot tip

over once it has been mounted in

the niche.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Mounting Accessories

The mounting accessories needed for

installing the appliance into the niche

are included in the packaging. Several

plastic bags are included which are

marked alphabetically.

The bag needed for each step will be

marked with its respective letter.

The distance "D" between the anti-tip

brackets b is the width of the

appliance.

^ Use the included Torx screwdriver to

tighten the screws.

^ Position the anti-tip brackets b on

the left and right walls of the

appliance niche.

Anti-tip brackets

The anti-tip brackets help keep the

appliance safely secured to the

installation niche to prevent tipping.

^ Mark the holes through the anti-tip

brackets b on the floor of the

installation niche.

Two anti-tip brackets are

recommended for each appliance or

appliance combination (side-by-side).

^ Set the brackets aside.

Assure that there are no electrical

wires or plumbing in the area which

the screws could penetrate - risk of

injury and damage.

Screws for various applications and

types of material are supplied in the

packaging.

If the installation niche is deeper than

the appliance, a solid wooden beam a

can be placed behind the anti-tip

If these are not suitable for the

anti-tip mechanism in your

installation, you will need to use

alternative means to secure it.

brackets b so the appliance can be

securely attached to the base or wall.

The length of the wooden beam a

should be to the width of the installation

space.

If possible, always screw the

wooden beam into existing studs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

In a cabinet with a back wall

^ Drill pilot holes:

–

¹/₈" (3 mm) for 5 x 60 mm wood

screws

–

¹/₁₆" (2 mm) for 4 x 15 mm wood

screws

^ screw the back wall of the cabinet in

several places directly to the wall

behind it.

^ Tightly secure the anti-tip brackets in

For this, use suitable plugs/screws

depending on the type of wall.

the niche.

Be certain that the screws penetrate

through the flooring and into the wall

plate a minimum of ³/₄" (19 mm).

In a cabinet without a back wall

If the included anti-tip brackets cannot

be secured in the niche, the built-in

cabinet must be secured to the wall

behind it with several screws. Only in

this way can the appliance later

secured in the built-in cabinet be

prevented from tipping.

^ screw the cabinet to the wall behind

it in several places using suitable

mounting brackets.

For this, use suitable plugs/screws

depending on the type of wall.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Securing an alternative anti-tip

device

^ Mark the installation height (lower

edge of the beam) on the rear wall of

the niche.

If the anti-tip brackets cannot be

attached securely using a wooden

beam, an alternative anti-tip device can

be used.

^ Select screws according to the

thickness of the wooden beam.

Determine the number of screws

based on the niche width, to ensure

that the beam will be attached

securely.

Ensure that there is no "give" between

the appliance and the anti-tip device.

If possible, always screw the

wooden beam to existing studs.

^ Locate wall studs near the rear wall

of the niche and mark the drill holes

in the beam accordingly.

^ Pre-drill the wooden beam.

^ Attach the wooden beam to the rear

wall of the niche.

Now prepare the water connection

from the appliance to the main

supply line (see "Plumbing").

– The wooden beam must be at least .

3" x 4" [75 mm x 100 mm] thick.

– The length is equal to the width of

the installation niche.

– If the installation niche is deeper than

the appliance, use a thicker wooden

beam or attach two beams.

– The beam must cover the appliance

by at least 2" (50.8 mm).

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Sliding the appliance into the

installation niche

^ Plug the appliance into the power

outlet b.

The plug of the appliance should be

easily accessible after installation.

If the plug is not accessible after the

appliance has been installed,

disconnection from the power

supply should be completed via the

circuit breaker.

If a side-by-side installation is

desired, connect the two appliances

together. See the Installation Manual

included with the "Merging Kit".

In the case of side-by-side

installations, a separate outlet must

be used for each appliance.

^ To prevent the power cord from

becoming caught:

Tie a piece of string to the middle of

the power cord and feed it forward

under the appliance. When sliding

the appliance in, pull the cable

forward c.

^ Unscrew the plinth.

^ Carefully slide the appliance into the

space until the height-adjustable

wheels interlock with the anti-tip

brackets d.

If resistance is felt when attempting to

slide the appliance into the installation

niche - for example, because the floor

is uneven,

^ Turn the rear adjustable wheels slightly

outward (see "Aligning the appliance"),

then push the appliance in.

Be careful not to damage the water pipe

or power cord attached to the floor.

^ To protect the corners of the

installation space, attach the

supplied edge protector a on both

sides with adhesive tape.

^ Remove the edge protector a.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Aligning the appliance

Important!

^ Align the appliance with the

When unscrewing the

height-adjustable feet, proceed

gradually, alternating between left

and right.

surrounding cabinets.

– Unscrew the height-adjustable feet

until the mark on the base has

reached the indicated guide

dimension 1 1/4" (32 mm). The guide

dimension of 1 1/4" (32 mm) is

related to a niche height of 84"

(2134 mm).

The height-adjustable feet at the front

and rear can all be adjusted from the

front:

– Front feet:

Adjust with a rachet 5/16" (8 mm) e.

– Rear feet:

Adjust with a (cordless) screwdriver

and/or a rachet 5/16" (8 mm) for fine

adjustment f.

^ Check that the appliance is level with

the surrounding cabinets.

Note:

– When unscrewing the

height-adjustable feet, proceed

gradually, alternating between left

and right.

– If using a wooden beam as an

alternative anti-tip device, rotate the

appliance all the way toward the

wooden beam.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Attaching the appliance to the

installation niche

Attaching the toe-kick cover

The maximum height of the toe-kick

cover is 4" (102 mm) from the top of

the floor. Do not cover the ventilation

slits in the plinth. Risk of damage to

the appliance.

^ If required, cut the toe-kick cover to

the required length and height.

^ Open the appliance door.

^ Fasten the appliance on the left and

right hand sides with the 3 (supplied)

wood screws.

If there is a fairly large gap above the

appliance, cut a wooden beam to fit

exactly and place it in the gap.

^ Attach the plinth to the appliance,

and put the included cover plates in

place.

Now connect the water supply to the

appliance (see "Plumbing").

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

^ Attach the toe-kick cover to the

^ Wedge the air separator at the

bottom of the freezer door, so it

connects in place.

plinth.

Mounting the air separator

The air separator on the inside of the

freezer door keeps the supply and

exhaust air separate. This prevents

warm exhaust air from flowing into the

machine, optimizing the energy

performance of the unit.

^ If necessary, shorten the three parts

of the air separator.

^ Insert the foam pieces back into the

sides.

^ Open the freezer door.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Aligning the Ice/Water

Dispenser

If necessary the depth of the Ice/Water

dispenser can be aligned from inside

the custom door cut-out. This allows the

dispenser to be aligned with the

custom door to achieve the best

possible appearance.

,^{Disconnect the appliance from}

the power supply.

^ Remove the cover and the plastic

grill.

^ Press the dispenser back and pull

downwards to remove.

^ Remove the screw from the rear

casing, then lift the tab on the drip

tray up and off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Once the drip tray has been removed,

the four metal strips can be used to

align the Ice/Water Dispenser.

^ Loosen the screws of the four metal

strips.

^ Pull the rear cover forward and out.

^ Insert a screwdriver into one of the

four slots and push sideways until the

dispenser is aligned with the custom

door (the gray arrow will adjust to the

rear; the black arrow will adjust front).

^ Re-tighten the screws of the strips.

^ Insert the drip tray back into place,

then clip the water sensors back into

the position.

^ Loosen the water sensors and

^ Replace the rear cover, panel and

carefully bend them upwards.

screw.

^ Replace the drip tray and cover.

^ Finish by putting the plastic grill,

cover, and dispenser back into

place.

^ Carefully remove the drip tray using a

screwdriver if necessary.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the appliance

Attaching the frame and the

shelf

The word "TOP" is marked on the

rear of the frame at the top.

For ³/₄" (19 mm) thick custom doors:

^ Slide the cover frame onto the

Ice/Water Dispenser and press until it

is flush with the door front.

For 1 ¹/₂" / (38 mm) thick custom doors:

^ Fit the extension trim onto frame.

^ Fit the cover frame onto the Ice/Water

Dispenser and press it firmly into

position until it is flush with the door

surface.

Download from Www.Somanuals.com. All Manuals Search And Download.

Plumbing

All plumbing work should be carried

out by a suitably qualified and

competent person, in accordance

with all applicable local and national

regulations.

The water quality must conform to

country requirements for drinking

water.

– The appliance is only suitable for

connection to the cold water supply.

– The water pressure must be between

25 and 120 psi (1.72-8.25 bar).

– A separate shut-off valve must be

installed, so that the water supply

can be interrupted as needed.

– The maximum outer diameter of the

water pipe (without fittings):

³/₈" (10 mm).

The shut-off valve for the water

connection must not be located

behind the appliance. It is

recommended to place the shut-off

valve directly next to the appliance

(base unit) or in another easily

accessible location.

Download from Www.Somanuals.com. All Manuals Search And Download.

Plumbing

Preparing the water connection For appliances with a hose guide

The connection to the household

water supply must be installed

before the appliance is installed.

^ Turn off the main water valve to prevent

damage caused by leaking water.

^ Attach the connecting pipe to the

shut-off valve, according to the

instructions supplied by the

manufacturer of the ice cube maker

installation kit.

^ position the device in front of the

niche and push the stainless steel

tube through the hose guide at the

back of the unit.

^ Install the connecting pipe. Always

observe the indicated clearance

dimensions to prevent damage to the

connecting pipe when pushing in the

appliance.

At this point the niche should be ready

for the appliance to be pushed back

into it (see "Installing the appliance").

^ You can now continue with the

installation.

^ Secure the connecting pipe to the

floor with adhesive tape.

^ You may now proceed to install the

appliance. See "Installing the

appliance".

Download from Www.Somanuals.com. All Manuals Search And Download.

Plumbing

Connecting the water supply

^ Push the union nut and seal onto the

water pipe.

When connecting the water pipe to

the solenoid valve of the appliance,

follow the instructions supplied by

the manufacturer of the ice cube

maker installation kit.

^ Push the end of the water pipe into

the appliance connection and screw

on the union nut, 3. First tighten by

hand.

^ Then use an open-ended wrench to

tighten the union nut. Do not over

tighten.

When bending the water pipe, be sure

not to kink it, otherwise there is a risk of

leaks and water damage.

^ Open the shut-off valve and the main

water connection. Check for leaks at

the connection for the shut-off valve

and to the appliance.

Use bending aids.

^ Switch the appliance on.

After a maximum of 10 hours the first

ice cubes will drop out of the ice

cube maker and collect in the ice

cube container.

^ Remove the cap from the appliance

connection, 1.

^ Bend the water pipe to suit the

location of the connection on the

appliance, 2.

Download from Www.Somanuals.com. All Manuals Search And Download.

Electrical connection

The appliance is supplied with a

UL-listed, 3-wire power cord and

NEMA 5-15 P plug ready for connection

to a 120 V, 60 Hz supply.

, ^{Avoid the risk of electrical}

shock

- Plug into a grounded 3-prong

outlet.

The fuse rating is 15 amps.

- Do not move the ground plug.

- Do not use an adapter.

- Do not use an extension cord.

The appliance requires a 3-wire

receptacle.

The receptacle must be installed by a

licensed electrician only.

Failure to follow these instructions

can result in death, fire, or electrical

shock.

In the case of side-by-side installations,

a separate outlet must be used for each

appliance. Ideally, the power outlet

should be next to the appliance and

easily accessible. Do not connect the

appliance to the power supply by an

extension cord. Extension cords do not

guarantee the required safety of the

appliance (danger of overheating).

Improper connection of the

equipment grounding conductor

may result in electric shock. If you

are in any doubt as to whether the

appliance has been properly

grounded, have the appliance

checked by a qualified electrician or

service technician.

If any changes are needed to the

household wiring or power supply, this

work must be performed by a qualified

electrician.

Installation, repairs and other work

by unqualified persons could be

dangerous.

Before installing the appliance,

verify that the voltage, load and

circuit rating information found on

the data plate match the household

electrical supply.

If there are any questions regarding the

electrical connection of this appliance

to the power supply, please consult a

licensed electrician or call the Miele

Technical Service.

U1-800-999-1360

V1-800-565-6435

Download from Www.Somanuals.com. All Manuals Search And Download.

RemoteVision (optional accessory)

Miele's RemoteVision Wi-Fi technology

creates a 'virtual link' between your

appliance and our monitoring center. If

a fault occurs, Miele's client service

center will be notified and contact you,

or another trusted individual identified

on your call roster, in order to gain

access to your appliance to fix the

problem.

Be sure your wireless system meets the

following requirements

– A wireless router that supports an

IEEE 802.11b protocol

– Windows XP^®or newer operating

system, Mac^®OS X 10.3 or higher

– Cable or DSL modem

– Microsoft^®Internet Explorer 6 or

higher, Safari 2.0 or higher, Firefox

1.5 or higher

For information on set-up and

installation of the RemoteVision module

see the "Installation" section of this

manual.

* Please note that each wireless router

manufacturer supplies their own device

drivers and setup programs. Due to the

differences in manufacturers, exact

router setup instructions are not

included in this manual. Wording and

instructions may vary.

Download from Www.Somanuals.com. All Manuals Search And Download.

RemoteVision (optional accessory)

Accessing the RemoteVision

^ Tap the X button until ; appears in

the display.

control panel

^ Touch the access button "p" to

confirm.

See the table on the following page for

a description of each setting in the

display.

^ Touch the access button "p" so it

turns yellow.

^ Use the Y or X buttons to select the

^ Note the position of the X button, but

RemoteVision options.

do not touch.

The module has been connected to

the network when ; # appears in the

display.

^ Touch the access button "p" again so

it turns white.

Only the access button "p" is visible.

If ; # does not appear, refer to the

"Network options" section of the

XKM 2000 Installation Instruction

manual.

^ Place one finger on the position of

the X button and hold (the X button

will not be visible).

^ While holding down the X button,

press the access button "p" once.

Keep holding the X button down until

the following appears in the display

(approx. 5 seconds).

^ Press and hold the access button "p"

for 2 seconds to confirm the change.

^ To return to the main menu, tap the X

button until a solid ; - appears in the

display.

^ Press the access button "p" to

confirm.

^ Tap the X button until a ; appears in

Access to the Custom settings mode is

now active for approximately 10

seconds.

the display.

^ Touch the access button "p".

You have left the Custom settings

mode.

When you are in the Custom settings

mode the door alarm is turned off

automatically. Once the door is

closed it is reactivated.

Download from Www.Somanuals.com. All Manuals Search And Download.

RemoteVision (optional accessory)

MasterCool control panel options for RemoteVision

Status indicators Description of function

Flashing ; ~

Flashing ; ‡

Flashing ; |

Module booting phase

Not connected to network

Connection to network established, no IP address

assigned

Solid

; #

Connected to network

Flashing ; <

In Ad-Hoc Mode, not connected

In Ad-Hoc Mode, connected

Flashing ; =

Selectable

options

Description of function

; -

; 2

; 3

; 4

Back

Reboot the module

Reset to factory settings

Enter Ad-Hoc Mode

Note: If you cannot select any option (other than ; - "Back", the module has not

been installed correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Alteration rights reserved / 3712

M.-Nr. 09 169 330 / 03

INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST

CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Clothes Dryer T 1329 C User Manual
Milwaukee Cordless Drill 2410 059 User Manual
NEC Flat Panel Television LCD4620 2 User Manual
Niles Audio Switch VCS HUB8 User Manual
NordicTrack Home Gym NTEL08991 User Manual
Olympus Carrying Case PT 018 User Manual
Omnimount TV Mount 100 FD User Manual
Panasonic Air Conditioner CS MKS18NKU User Manual
Panasonic VCR AG 2580P User Manual
Partner Tech Lawn Mower M6556SMD User Manual