DVD Premium Pro Series
NET Users Manual
Version 2.01 NET
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
TABLE OF CONTENTS
System Overview..................................................................................................5
Unpacking your system.........................................................................................5
Microboards Statement Regarding Improper Duplication .....................................5
Installation Requirements .....................................................................................6
Power Supply Requirements ................................................................................6
Connecting Master and Slave Towers ..................................................................7
Microboards NET Configuration............................................................................8
Configuration Options ...................................................................................8
Basic Configuration.......................................................................................8
Advanced Configuration................................................................................9
Stand-Alone Operation .................................................................................9
Loading media ......................................................................................................9
Main Menu..........................................................................................................10
Copy Disc to Disc................................................................................................11
Registering Data to the Hard Drive (HDD)..........................................................11
Copy Hard Drive (HDD) to Disc ..........................................................................12
Clearing the Hard Drive (HDD) ...........................................................................12
Simulation Disc to Disc .......................................................................................13
Erasing RW media..............................................................................................13
Track Extraction (for CD ONLY)..........................................................................14
Error status in Track Extraction:..................................................................15
Setup Menu ........................................................................................................16
Mode Select................................................................................................17
DVD WR Speed..........................................................................................17
CD WR Speed ............................................................................................17
ISRC Check................................................................................................17
Auto Run.....................................................................................................17
Copy Quantity.............................................................................................17
Session Mode.............................................................................................17
Reader Select.............................................................................................17
Drive Inquiry................................................................................................17
F/W Version................................................................................................17
F/W Update.................................................................................................17
NET Reboot................................................................................................17
Log..............................................................................................................17
Error Codes ........................................................................................................18
Specifications......................................................................................................22
Supported Formats .............................................................................................22
Firmware Updates...............................................................................................22
Technical Support...............................................................................................23
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
System Overview
The DVD Premium Pro NET Series employs 10 General Purpose DVD-+R/DL recorders in each
tower, with the ability to have all connected drives duplicating from a single master. The hard
drive comes standard with each tower and allows for DVD/CD image archival and CD track
extraction for CD audio compilations.
An intuitive, menu driven
display and 5-button control
interface provide one-touch
operation for the novice user
COPY START
(DISC to DISC)
while providing advanced
features for the professional.
Advanced Features:
•
•
•
•
•
•
•
•
20-drive simultaneous burn from one master in NET mode
Stand-Alone DVD-+R/RW/DL / CD-R duplicator
One Touch duplication
Auto Run option
Speed selectable (1x to 16x for DVD-+R and 4x to 48x for CD-R)
Supports writing to DVD-+R/RW/DL, CD-R/RW
Copy and Verify
Hard drive comes standard for standalone DVD/CD image archival and CD track
extraction for audio compilation CDs
•
•
Store multiple hard drive images
Counter feature allows the user to input how many discs need to be copied and
the keeps track of the total discs completed.
Automatically detects DVD or CD masters
Simulation mode to ensure recording stability
Easy-to-read, two-line display for status and error reporting
Updates easily installed through DVD/CD reader
•
•
•
•
Unpacking your system
When unpacking your duplicator, confirm the following items are included:
•
•
•
•
DVD Premium Pro Series duplicators (minimum of 2)
Power cable
NET connection cabling with each Slave tower
Microboards Starter Kit, Connection and Configuration Guides, and Documentation CD
If any of these items are missing, please contact or Microboards Technology Technical Support at
952-556-1639.
IMPORTANT: Please keep all the packing for your DVD Premium Pro Series duplicator. If your
unit ever needs to be sent in for service, it must be returned in the original packing or the
warranty will be voided.
Microboards Statement Regarding Improper Duplication
Microboards Technology fully supports the right of any business, organization, group, or
individual to protect their property from unlicensed, unauthorized, or illegal duplication.
As a user of our equipment, we expect you to support that right as well.
Microboards Technology is neither responsible nor liable for the infringement of any laws
regarding the illegal duplication of property. Microboards Technology products are in no way
intended to encourage or condone such duplication.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Installation Requirements
System Setup
•
•
Connect the power cable to the DVD Premium Pro Series tower and plug in to a
protected power outlet strip or UPS power supply.
Connect the 2 towers using the NET cable provided (see page 7 for more information).
o
The left port on the back is the IN port, and the right is the OUT port; the Master
tower should have the NET cable plugged into the OUT port, and the Slave
should have the cable plugged into the IN port.
o
If more than 2 towers are being connected, connect the OUT port in the first
Slave to the IN port of the next. In the final chain of towers, the Master wil have
only the OUT port used, while the final tower will have only the IN port used.
•
Turn on power to the towers. The system is now ready to be configured (see page 8).
Install your DVD Premium Pro Series duplicator in the following environment:
•
•
•
•
•
On a level and stable surface
In a well ventilated location
Temperature and humidity
Temperature: 5-40°
Humidity: 20-80%RH (no dew formation)
Do not install it in the following places:
ƒ
Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked
by a curtain or blind.)
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
A dusty location
A place where there is a lot of vibration
Near open flame
A place where the temperature and humidity change drastically
Near a heating device such as a heater or furnace
A location where air from an air conditioner blows directly onto the unit
Near a container filled with water
In winter during times of low humidity or in a location where static electricity is
generated, use an anti-static-electricity mat or humidifier to prevent static electricity.
Power Supply Requirements
Each tower can draw up to 3 amps of current during normal operation. It is highly
recommended that your towers operate on a dedicated circuit with a maximum of 4
towers for each 15 amps of current. Overloading a circuit will cause failures.
ƒ
ƒ
Use house current as the power source for the unit.
Do not use an outlet near a motor driven appliance (i.e. air conditioner, copying
machine).
ƒ
ƒ
Use an outlet with stable power supply voltages.
Do not overload an outlet. Do not use a service outlet from a PCs or other office
machine.
ƒ
ƒ
ƒ
Wire the power cord properly.
Do not touch the power cord with a wet hand.
Be careful not to damage the power cord.
Inspect the power cord periodically.
In the event that the power cord is damaged, replace the power cord.
Be sure to use a tool such as the screwdriver to change the 115/230V Switch.
Do not use your finger.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Connecting Master and Slave Towers
The Microboards DVD Premium Pro NET tower line requires a physical connection between the
towers. A tower will be designated as a Master or as a Slave tower initially based solely on the
configuration of the connection.
The directions below give 2 connection scenarios: a 2-tower configuration, and a Multi-Tower
configuration. Please use the appropriate instructions based on the number of towers you have.
The diagrams below show the backs of the towers.
For the 2-Tower configuration, connect the OUT port of
one tower to the IN port of the other using the provided
cabling. Whichever tower is connected by the OUT
port will become the Master tower. The tower that is
connected by the IN port other will become the Slave
tower.
Once the towers are turned on and initialized, press
YES on the Master tower to enter NET mode.
Master
Tower
Slave
Tower
For Stand-alone operation, press NO on both the
Master and Slave when the configuration display is
showing.
Each tower will then operate as an
independent tower.
To return to NET mode, you will need to restart both
towers.
2-Tower Configuration
For Multi-Tower configuration (3 towers
are shown here), select one tower as
the Master and connect one end of one
of the provided cables to the OUT port
on the Master tower and the other end
to the IN port on Slave Tower One.
Plug the next cable to the OUT port of
Slave Tower One and to the IN port of
Slave Tower Two.
If you have more than 3 towers,
continue to connect the remaining
towers in the same fashion. The last
tower will only have a cable connected
to the IN port.
Master
Tower
Slave
Tower
One
Slave
Tower
Two
Once the Master and Slave towers
have initialized, the displays will give
you the configuration options.
Multi-Tower Configuration
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Microboards NET Configuration
The Microboards NET configuration allows you to connect multiple 10-drive tower duplicators.
They can function together as a single duplicator with 10 drives per tower for ultra high-quantity
production, or can operate independently as stand-alone duplicators, each copying from a
different master.
It does not matter which tower is set as the Master; the only restriction is that one tower of the
chain must have the NET cable connected to the Out port only. The last tower in the chain will
only use the In port.
Configuration Options
To set the Multi-Tower configuration, turn on power
NET MASTER
YES: SET MASTER
NET MASTER
NO: STANDALONE
to all of the connected towers and wait for the
configuration options to be displayed, as shown to
the right.
Master Display alternates
between these messages
The exact display message and configuration
options on each tower will depend on the location of
that tower in the chain.
NET SLAVE 1
YES: SET MASTER
NET SLAVE 1
NO: STANDALONE
Once the configuration has been selected, you must
either power cycle all towers or run the Net Reboot
on all Master towers to change the configuration.
First Slave Display, additional Slave
towers show Slave number sequentially
NET SLAVE X
NO: STANDALONE
The display of any Master or Stand-Alone tower will initially read COPY
START when it is ready for duplication. The control panel on Slave towers
is disabled.
Final tower in chain
Basic Configuration
The most basic configuration would be to set the first tower as the Master with the remaining
towers as Slaves. For this configuration, you would only need to press the YES button on the
Master tower when the configuration options are showing.
NET
NET
NET
NET
NET
NET
Master
Slave 1
Slave 2
Slave 3
Slave 4
Slave 5
The result with a six-tower configuration is shown above. Only the reader and hard drive on the
NET Master will be available as source drives.
Net Reboot and Basic Configuration
To run the Net Reboot, press either the ▲or ▼ button until the display reads SETUP. Press the
YES button, then press either the ▲or ▼ button until the display reads NET REBOOT. Press
YES and all towers will reboot.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Advanced Configuration
If, however, you wish to operate them as two 3-tower Master/Slave groups, simply press the YES
button on the tower on which the Configuration Options display reads NET SLAVE 3. This will
cause all towers following this tower to be slaved to that tower. The YES button on the first tower
must also be pressed to slave towers 2 and 3 to the first tower. The reader and hard drive in the
NET Master towers of both groups can be used for duplication to the connected Slave towers.
The resulting Master/Slave configuration is shown below.
NET
NET
NET
NET
NET
NET
Master
Slave 1
Slave 2
Master
Slave 1
Slave 2
Group A
Group B
This can be done in any combination of towers. However, you must set the Master/Slave
configurations starting with the last master you want to set, following the tower chain from the end
to the beginning.
You do not need to disconnect any towers to change the Master/Slave configuration.
Net Reboot and Advanced Configuration
To run the Net Reboot, press either the ▲or ▼ button until the display reads SETUP. Press the
YES button, then press either the ▲or ▼ button until the display reads NET REBOOT. Press
YES and all towers slaved to that Master will reboot. In the example above, the Net Reboot
would need to be run on both the Group A Master tower and the Group B Master tower for all 8
towers to reboot.
Stand-Alone Operation
For all towers in the chain to operate in Stand-Alone mode, the NO button must be pressed on
each tower to select Stand-Alone mode. The order in which this is done does not matter.
You can combine Stand-Alone and Advanced Configurations. After start-up in the example
above, pressing YES on NET SLAVE 4, NO on NET SLAVE 3, and YES on the NET MASTER
tower would create 3 groups: Group A with 3 towers, Group B as a single Stand-Alone tower, and
Group C with 2 towers.
Net Reboot and Stand-Alone Operation
When in Stand-Alone Operation, the Net Reboot option does not appear in the Setup menu.
Each tower will need to be power cycled manually.
Loading media
To automatically eject all empty recorder drives in all connected towers, simply load your master
disc and press the YES button when the display reads COPY START. This will eject all drives
that have not had media loaded. When all drives are loaded and the drive LEDs turn off,
duplication will automatically begin.
If you do not need to burn a copy in each recorder drive, load the number of drives necessary,
close those drives, and wait for the drive LEDs to turn off. Press the YES button, and any open
trays will automatically close but be considered empty.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Main Menu
The Arrow buttons (▼▲)allow you to move forward or backward in the menu without selecting
the current menu item. The NO button will move you to the next menu item. YES will select the
current menu item.
YES
INSERT
MASTER DISC
INSERT
TARGET DISC
ANALYZING MASTER
COPY
15:26
20%
COPY START?
(DISCtoDISC)
CD-DA
NO,▼
YES
MASTER SELECT?
(DISCtoDISC)
>READER?
(DISCtoDISC)
NO,▼
>HDD1? CD-DA
(HDDtoDISC)
>HDD1? 15:26
(HDDtoDISC)
INSERT
COPY START?
(HDD1toDISC)
COPY
15:26
20%
TARGET DISC
CD-DA
NO,▼
YES
>HDD2?
NO,▼
INSERT
REGIST
CD-DA
15:26
20%
COPY START?
(HDD2toDISC)
COPY
15:26
20%
(DISCtoHDD/DISC)
TARGET DISC
CD-DA
NO,▼
>HDDX? CD-DA
(HDDtoDISC)
>HHDX? 15:26
(HDDtoDISC)
INSERT
COPY START?
(HDDXtoDISC)
COPY
15:26
20%
TARGET DISC
CD-DA
NO,▼
YES
YES
YES
>>HDD1 CLEAR?
>HDD1?
>MASTER CLEAR?
(HDDtoDISC)
NO,▼
>HDDX?
>>HDDX CLEAR?
NO,▼
(HDDtoDISC)
NO,▼
>>EXIT?
>EXIT?
NO,▼
YES
YES
SIMULATION?
(DISCtoDISC)
INSERT
INSERT
ANALYZING MASTER
SIMULATION 15:26
CD-DA 20%
MASTER DISC
TARGET DISC
ESC
ESC
NO,▼
YES
YES
DISC ERASE?
(REWRITABLE)
SURE ?
SURE ?
DISC ERASE
Please wait...
YES
YES
>QUICK ERASE?
NO,▼
NO,▼
>QUICK ERASE?
DISC ERASE
Please wait...
NO,▼
>EXIT?
NO,▼
YES
Trk EXTRACTION?
(DISCtoHDD1)
EXTRACTION OK?
YES
ESC
ESC
NO,▼
NO,▼
YES
SETUP?
SETUP MENU
(see pg 14)
(MODE CHANGE)
NO/ESC
INSERT
ANALYZING MASTER
EXTRACT THE Trk?
TRK 01/12
MASTER DISC
YES = execute the selected track
YES,NO,▼,▲
NO,▼,▲ = skip track
EXTRACT THE Trk?
TRK 12/12
YES,NO,▼,▲
END EXTRACTION?
NO,▼
YES
YES
REGIST
CD-DA
15:26
20%
COPY TO HDD OK?
YES
NEXT MASTER
NO
NO
COPY START
(HDD1toDISC)
COPY MENU
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Copy Disc to Disc
1. Place the Master Disc into the Reader drive.
Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on
the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same
media type as the master; you cannot copy a CD master to DVD’s, for instance.
2. The display reads COPY START? (DISC to DISC).
Copy Start?
(DISC to DISC)
3. Press YES. If you have the Auto Run feature set to ON, the duplication will begin when
the master is loaded and all drives are loaded with blank media.
4. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
5. The display will now show the progress of the Copy Job.
COPY
DVD
4.0GB
25%
6. The Recorder(s) will eject the recordable discs when the job is complete.
Registering Data to the Hard Drive (HDD)
When registering data to a partition on the internal hard drive, you do have the option of
recording to the blank media as well. In the SETUP menu, go to “Copy DISC to HD/DISC”
and change the setting from OFF to ON. This will allow the data from the master disc to be
copied to the internal hard drive, as well as any blank discs you have in the recorders. See
page 14 for a description of the SETUP menu.
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows MASTER SELECT? (DISC TO DISC)
MASTER SELECT?
(DISC to DISC)
2. Place the Master disc into the Reader drive.
3. Press the YES button.
4. The display will show:
READER?
(DISC to DISC)
5. Press the NO or ▼ button
6. The display will now show:
HDD1?
(DISC to HDD)
7. If you wish to copy the data to the 1st partition, press the YES button.
8. If you wish to select another partition, press the NO or ▼ button.
HDD1?
(DISC to HDD)
9. By continuing to press the NO or ▼ button, you will scroll through the different HDD
partitions. Once you are at the partition you wish to use, press the YES button.
10. The display will now show the progress of the data being transferred to the hard drive:
REGISTER
DVD
4.0GB
25%
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
11. Once the Master disc has been copied to the HDD, the Reader drive will eject the disc.
When you go back into the MASTER SELECT? Menu, and select a partition with data
stored on it, the display will show the type of data (ROM or Video) and the capacity of
that data. Proceed to COPY HDD TO DVD section.
Copy Hard Drive (HDD) to Disc
1. Follow the instructions on page 10 to register the Master to the HDD.
2. Press to NO or ▼ button until the screen displays
MASTER SELECT?
(DISC)
3. Press the YES button.
4. The display will show READER.
5. Press the NO or ▼ button and the display will show HDD1. If this is the hard drive
partition you wish to copy, press the YES button.
6. The screen will display COPY START? (HDD1 to DISC)
COPY START?
(HDD1 to DISC)
7. If you wish to select a different hard drive partition, press the NO or ▼ button in step 5,
unit the display shows the partition you wish to copy.
8. Place the blank disc(s) into the Recorder(s) and wait 10 seconds for the light(s) on the
front of the Recorder(s) to stop blinking.
9. Press the YES button. If you have the Auto Run feature set to ON, the duplication will
begin when all drives are loaded with blank media.
10. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
11. The display will now show the progress of the copy job from the HDD to the Recorder(s):
COPY
DVD
4.0GB
25%
12. After the Copy job is complete, the disc(s) will be ejected from the Recorder(s).
Clearing the Hard Drive (HDD)
The Master Clear option will not appear if there is no information stored on any of the hard drive
partitions.
1. At the COPY START? (HDD1 to DISC) menu, press the NO or ▼ button until the display
shows MASTER SELECT? (HDD1 to DISC).
2. Press the YES button.
3. The display will show:
READER?
(DISC to DISC)
4. Press the NO or ▼ button until you the screen displays MASTER CLEAR? (HDD):
MASTER CLEAR?
(HDD)
5. Press the YES button
6. You can now select which hard drive partition to erase. Pressing the NO or ▼ button will
scroll you though the partition selections.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
7. Press the YES button if you are sure you want to clear the HDD.
8. The hard drive will now be cleared and you will be asked if you want to register another
master to the HDD.
>HDD1?
(DISC to HDD)
9. Press YES and the Reader drive will eject and you can insert another master to register
to the HDD.
REGISTER
DVD
4.0GB
25%
10. Press NO and to exit this menu without registering data to the hard drive partition.
Simulation Disc to Disc
Important: Simulation is not allowed when using DVD+R/RW media.
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows SIMULATION? (DISC to DISC).
SIMULATION??
(DISC to DISC)
2. Place the Master Disc into the Reader drive
3. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on
the front of the Recorder(s) to stop blinking.
4. Press YES.
5. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
6. The display will now show the progress of the Simulation Copy Job
SIMULATION
DVD
4.0GB
25%
7. The Recorder(s) will eject the DVD-R discs when the job is complete.
Note: DVD-R media will NOT be recorded to in Simulation Mode.
Erasing RW media
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows DISC ERASE? (REWRITABLE):
DISC ERASE?
(REWRITABLE)
2. Load the Recorder(s) with the CD-RW or DVD-+RW media you wish to erase. You can
erase one disc at a time or fill all the Recorders to erase multiple discs at once. All discs
loaded must be of the same type.
QUICK ERASE?
3. Press the YES button
4. The next screen asks if you want to perform a Quick
Erase.
FULL ERASE?
If you wish to perform a Full Erase, press the NO
button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Pressing the YES button at either of these selections will show the following screen:
SURE?
Press the YES button if you are sure you want to erase the DVD-+RW disc. If you do not
wish to erase the disc, press the NO button and you will go back to the DISC ERASE
screen (step 1).
5. The screen will now show:
DISC ERASE
6. Once the erasing is complete, the Recorder(s) will eject the disc(s).
Track Extraction (for CD ONLY)
When extracting tracks to the internal hard drive, the DVD Premium Pro Series always uses the
first HDD partition. If there is information already stored on HDD partition 1, the system will ask if
you want to overwrite this information. This partition cannot be changed from HDD partition one.
1. At the COPY START? Menu, press the NO or ▼ button until the display reads:
Trk EXTRACTION?
(CDtoHDD)
Press the YES button.
2. Press YES again in the following screen.
EXTRACTION OK?
If any master data is already registered in HDD, the DVD Premium Pro Series asks you
whether you want to overwrite data.
Press YES to overwrite, NO to cancel.
3. Insert a master audio disc into the reader drive. DVD Premium Pro Series will analyze the
master disc.
INSERT
ANALYZING MASTER
MASTER DISC
4. After it completes analyzing the master disc, it displays Selected Track Number / Total Track
Number.
This master data has total 12 tracks.
EXTRACT THE Trk?
TRK 01/12
Press NO or ▼ to skip forward a track.
Press YES to select the track you want to extract.
5. If you skip forward all tracks, it asks if you want to end extraction for the master data.
END EXTRACTION?
Press YES to finish extraction and register selected tracks in HDD.
Press NO or ▼ to add more tracks from this master data.
6. If you press YES in step 5, the DVD Premium Pro Series asks you to register the extracted
tracks in HDD.
COPY TO HDD OK?
Press YES to start registration.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
7. After registration completes, the DVD Premium Pro Series asks you if you want to extract
more tracks from other master audio discs.
NEXT MASTER
Press YES to extract more tracks from other master audio discs.
Press NO to complete extraction.
8. If you press NO, the DVD Premium Pro Series moves back to COPY menu so that you can
copy the extracted tracks in HDD to blank CD-R media.
COPY START
(HDD to DISC)
Error status in Track Extraction:
In the following situation in TRACK EXTRACTION, the DVD Premium Pro Series shows an error
status on the LCD.
1. If you try to extract a track which is not CD-DA, the
EXTRACT THE Trk?
track number does not display properly, showing “—“.
--/12
Pressing the YES button will not add the track.
2. If the total time of extracted audio tracks is over 80
minutes or 99 tracks have already been selected, the
DVD Premium Pro Series displays OVER. Pressing
the YES button will not add the track.
EXTRACT THE Trk?
06/12
OVER
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Setup Menu
Yes
Yes
Yes
Yes
SETUP
MODE SELECT?
(COPY MODE)
COPY?
(DISC to DISC)
VERIFY?
(DISC to DISC)
COPY + V?
(DISC to DISC)
EXIT?
COPY?
DVD WR
SPEED?
(MAX)
MAX?
MAX?
12X?
40X?
1X?
4X?
EXIT?
MAX?
CD WR SPEED?
(MAX)
EXIT?
MAX?
ISRC CHECK?
(OFF)
ISRC ON?
ON?
ISRC OFF?
OFF?
EXIT?
ISRC ON?
Yes
Yes
Auto Run?
(OFF)
Yes
Yes
COPY QUANTITY?
(xxxx/xxxx)
COPY QUANTITY?
0---
SESSION MODE?
(AUTO)
AUTO?
CLOSE?
OPEN?
EXIT?
AUTO?
Yes
READER SELECT?
(DRIVExx)
DRIVE01
READER
THE DISPLAY WILL CYCLE
THROUGH THE MAKE, MODEL,
AND FIRMWARE OF THE
SELECTED DRIVE UNTIL YOU
PRESS A BUTTON.
DRIVE02
RECORDER
DRIVExx
RECORDER
DRIVE01
READER
EXIT?
Yes
DRIVE INQUIRY?
HDD
HDD
THE DISPLAY WILL CYCLE
THROUGH THE MAKE, MODEL,
AND FIRMWARE OF THE
SELECTED DRIVE UNTIL YOU
PRESS A BUTTON.
DRIVE01
READER
DRIVExx
RECORDER
EXIT?
HDD
HDD
F/W VERSION
F/W UPDATE
Premium Pro 1020
VER A.BC
H/W INFO
12ΦπρΨ
EXIT?
Premium Pro 1020
VER A.BC
Yes
Yes
INSERT
Checking
UPDATE?
Updating
Complete
PROGRAM DISC
VER a.bc -> b.cd
Yes
NET REBOOT?
REBOOTS MASTER
(with NET option only)
AND SLAVE TOWERS
KEY
Yes
Caption indicates button to press
No caption indicates display sequence
▲(Back), NO, or ▼(Forward)
LOG?
EXIT?
Yes
OK xxxxxxx
NG xxxxxxx
YES (Accept) or ESC (Return to Menu)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Setup Menu
1. At the COPY START? (DISC to DISC) menu, press
the NO or ▼ button until the display shows SETUP?
(MODE CHANGE)
SETUP?
(MODE CHANGE)
2. Press the YES button
3. The first setup option is Mode Select, followed by Copy DISC to HD/DISC, Write Speed,
ISRC Check, Copy Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit.
4. Pressing the NO or ▼ button will allow you to move from menu to menu.
5. Pressing the YES button will allow you to view or change the configuration of the system.
Here is a description of each setup menu item:
Mode Select
COPY - Duplication from master disc to blank disc, or HDD to blank disc if master data is
registered.
VERIFY - It compares a copied disc with the master disc.
COPY+V - Copying in the COPY+VERIFY mode
DVD WR Speed
Available speeds range from 16x down to 1x.
CD WR Speed
Available speeds range from 48x down to 4x.
ISRC Check
Default setting is ON. This feature will copy the ISRC codes from the Master audio disc to the
blank discs.
Auto Run
Default setting is OFF. When set to ON, this allows the duplicator to start the duplication process
when all recorders are loaded with blank media. If you are copying Disc-to-Disc, the master must
be loaded before duplication will begin.
>>COPY QUANTITY
Copy Quantity
Set up the number of disc you want to copy.
0750
Use the ▼▲buttons to change the number in the current column up or down. YES will move you
one column to the right, NO will move you 1 column to the left. Press YES when in the right
column to save the number of copies entered. The example above shows that 750 copies have
been entered with the cursor currently in the right column (underlined).
Session Mode (CD only. Invalid for DVD)
Select either from AUTO, CLOSE, or OPEN.
AUTO: Make the session of copied disc as same as the master.
CLOSE: Close the session of copied disc.
OPEN: Leave the session of copied disc open.
Reader Select
Changes which drive is selected as the reader. This setting should not be changed.
Drive Inquiry
Displays an inquiry of each drive connected, showing drive model and firmware.
F/W Version
Shows DVD Premium Pro Series firmware version and H/W information.
F/W Update
Used when updating the firmware of the DVD Premium Pro Series duplicator.
NET Reboot
Will reboot the Master tower and any towers Slaved to the Master when running using the NET
option. This menu item is not available when running in Stand Alone mode.
Log
Displays the number of successful and unsuccessful discs over the entire life of the duplicator.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Error Codes
Read Errors
ASC
ASCQ Description
00
00
00
00
00
00
00
00
01
00
06
11
12
13
14
15
17
00
NO ADDITIONAL SENSE INFORMATION
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED
AUDIO PLAY OPERATION IN PROGRESS
AUDIO PLAY OPERATION PAUSE
AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED
AUDIO PLAY OPERATION STOPPED DUE TO ERROR
NO CURRENT AUDIO STATUS TO RETURN
CLEANINF REQUESTED
NO INDEX/SECTOR SIGNAL
02
04
04
04
04
04
05
06
08
08
08
08
09
09
09
09
0A
0B
0B
0B
10
11
11
11
11
11
11
12
13
14
14
14
15
15
15
17
17
17
17
17
00
00
01
02
03
07
00
00
00
01
02
03
00
01
02
03
00
00
01
02
00
01
02
05
06
0F
10
00
00
01
05
06
00
01
02
00
01
02
03
NO SEEK COMPLETE
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
LOGICAL UNIT IS IN PROCESS OF BECOMING READY
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUESTED
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
LOGICAL UNIT DOES NOT RESPOND TO SELECTION
NO REFERENCE POSITION FOUND (medium may be upside down)
LOGICAL UNIT COMMUNICATION FAILURE
LOGICAL UNIT COMUUNICATION TIME-OUT
LOGICAL UNIT COMMUNICATION PARITY ERROR
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
TRACK FOLLOWING ERROR
TRACKING SERVO FAILURE
FOCUS SERVO FAILURE
SPINDLE SERVO FAILURE
ERROR LOG OVERFLOW
WARNING
WARNING-SPECIFIED TEMPERATURE EXCEEDED
WARNING-ENCLOSURE DEGRADED
ID CRC OR ECC ERROR
UNRECOVERED READ ERROR
ERROR TOO LONG TO CORRECT
L-EC UNCORRECTABLE ERROR
CIRC UNRECOVERED ERROR
ERROR READING UPC/EAN NUMBER
ERROR – LOSS PF STREAMING
ADDRESS MARK NOT FOUND FOR ID FIELD
ADDRESS MARK NOT FOUND FOR DATA FIELD
RECORD NOT FOUND
RECORD NOT FOUND – RECOMMEND REASSIGNMENT
RECORD NOT FOUND – DATA AUTO – REALLOCATED
RANDOM POSITIONING ERROR
MECHANICAL POSITIONING ERROR
POSITIONING ERROR DETECTED BY READ OF MEDIUM
RECOVERED DATA WITH NO EEOR CORRECTION APPLIED
RECOVERED DATA WITH RETRIES
RECOVERED DATA WITH POSITIVE HEAD OFFSET
RECOVERED DATA WITH NEGATIVE HEAD OFFSET
04
RECOVERED DATA WITH RETIES AND/OR CIRC APPLIED
17
05
RECOVERED DATA USING PREVIOUS SECTOR ID
RECOVERED DATA WITH ERROR CORRECTION APPLIED
RECOVERED DATA WITH ERROR CORP. & RETRIES APPLIED
RECOVERED DATA WITH CIRC
RECOVERED DATA WITH L-EC
PARAMETER LIST LENGTH ERROR
SYNCHRONOUS DATA TRANSFER ERROR
RECOVERED ID WITH ECC CORRECTION
INVALID COMMAND OPERATION CODE
LOGICAL BLOCK ADDRESS OUT OF RANGE
INVALID FIELD IN CDB
LOGICAL UNIT NOT SUPPORTED
INVALID FIELD IN PARAMETER LIST
PARAMETER NOT SUPPORTED
PARAMETER VALUE INVALID
THRESHOLD PARAMETERS NOT SUPPORTED
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
POWER ON OCCURRED
SCSI BUS RESET OCCURRED
BUS DEVICE RESET FUNCTION OCCURRED
DEVICE INTERNAL RESET
18
18
18
18
1A
1B
1E
20
21
24
25
26
26
26
26
26
28
29
29
29
29
29
00
01
03
04
00
00
00
00
00
00
00
00
01
02
03
04
00
00
01
02
03
04
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
2A
2A
2A
2A
2B
2C
2C
2F
30
30
30
30
35
35
35
35
35
39
3A
3A
3A
3B
3B
3B
3B
3B
3B
3B
3D
3E
3E
3E
3F
3F
3F
3F
40
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
53
53
55
57
5A
5A
5B
5B
5B
5B
5D
5D
5D
5E
5E
5E
5E
5E
63
63
64
65
73
80
00
01
02
03
00
00
05
00
00
01
02
03
00
01
02
03
04
00
00
01
02
0F
11
12
13
14
15
16
00
00
01
02
00
01
02
03
NN
00
00
00
00
00
00
00
00
00
00
NN
00
00
02
00
00
00
01
00
01
02
03
00
01
FF
00
01
02
03
04
00
01
00
00
00
xx
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
LOG PARAMETERS CHANGED
RESERVATIONS PREEMPTED
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT
COMMAND SEQUENCE ERROR
PERSISTENT PREVENT CONFLICT
COMMANDS CLEARED BY ANOTHER INITIATOR
INCOMPATIBLE MEDIUM INSTALLED
CANNOT READ MEDIUM - UNKNOWN FORMAT
CANNOT READ MEDIUM – INCOMPATIBLE FORMAT
CLEASNING CARTRIDGE INSTALLED
ENCLOSURE SERVICES FAILURE
UNSUPPORTED ENCLOSURE FUNCTION
ENCLOSURE SERVICES UNAVAILABLE
ENCLOSURE SERVICES TRANSFER FAILURE
ENCLOSURE SERVICES TRANSFER REFUSED
SAVING PARAMETERS NOT SUPPORTED
MEDIUM NOT PRESENT
MEDIUM NOT PRESENT-TRAY CLOSED
MEDIUM NOT PRESENT-TRAY OPEN
END OF MEDIUM REACHED
MEDIUM MAGAZINE NOT ACCESSIBLE
MEDIUM MAGAZINE REMOVED
MEDIUM MAGAZINE INSERTED
MEDIUM MAGAZINE LOCKED
MEDIUM MAGAZINE UNLOCKED
MECHANICAL POSITIONING OR CHANGER ERROR
INVALID BITS IN IDENTIFY MESSAGE
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
LOGICAL UNIT FAILURE
TIMEOUT ON LOGICAL UNIT
TARGET OPERATING CONDITIONS HAVE CHANGED
MICROCODE HAS BEEN CHANGED
CHANGED OPERATING DEFINITION
INQUIRY DATA HAS CHANGED
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
MESSAGE ERROR
INTERNAL TARGET FAILURE
SELECT OR RESELECT FAILURE
UNSUCCESSFUL SOFT RESET
SCSI PARITY ERROR
INITIATOR DETECTED ERROR MESSAGE RECEIVED
INVALID MESSAGE ERROR
COMMAND PHASE ERROR
DATA PHASE ERROR
LOGICAL UNIT FAILED SELF-CONFIGURATION
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)
OVAERLAPPED COMMANDS ATTEMPTED
MEDIA LOAD OR EJECTED FAILED
MEDIUM REMOVAL PREVENTED
SYSTEM RESOURCE FAILURE
UNABLE TO RECOVER TABLE-OF-CONTENTS
OPERATOR REQUEST OR STATE CHANGE INPUT
OPERATOR MEDIUM REMOVAL REQUEST
LOG EXCEPTION
THRESHOLD CONDITION MET
LOG COUNTER AT MAXIMUM
LOG LIST CODES EXHAUSTED
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Logical Unit Failure
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
LOW POWER CONDITION ON
IDLE CONDITION ACTIVATED BY TIMER
STANDBY CONDITION ACTIVATED BY COMMAND
IDLE CONDITION ACTIVATED BY COMMAND
STANDBY CONDITION ACTIVATED BY COMMAND
END OF USER AREA ENCOUNTERED ON THIS TRACK
PACKET DOES NOT FIT IN AVAILABLE SPACE
ILLEGAL MODE FOR THIS TRACK
VOLTAGE FAULT
CD CONTROL ERROR
VENDOR SPECIFIC
Write Errors
ASC
ASCQ Description
00
00
00
00
06
11
NO ADDITIONAL SENSE INFORMATION
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED
AUDIO PLAY OPERATION IN PROGRESS
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
00
00
00
00
02
04
04
04
04
04
04
04
05
06
08
08
08
08
09
09
09
09
0A
0B
0B
0B
0C
0C
0C
0C
0C
0C
0C
11
11
15
15
15
16
16
16
16
16
17
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
19
19
19
19
1A
1B
1C
1C
1C
1D
20
21
21
24
25
26
26
26
12
13
14
15
00
00
01
02
03
04
07
08
00
00
00
01
02
03
00
01
02
03
00
00
01
02
00
02
03
07
08
09
0A
00
06
00
01
02
00
01
02
03
04
00
01
02
03
04
05
06
07
08
09
00
01
02
03
04
05
06
07
00
01
02
03
00
00
00
01
02
00
00
00
02
00
00
00
01
02
AUDIO PLAY OPERATION PAUSED
AUDIO PLAY OPERATION SUCCESSFULLY
AUDIO PLAY OPERATION STOPPED DUE TO ERRPOR
NO CURRENT AUDIO STATUS TO RETURN
NO SEEK COMPLETE
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
LOGICAL UNIT IS IN PROCESS OF BECOMING READY
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS
LOGICAL UNIT DOES NOT RESPOND TO SELECTION
NO REFERENCE POSITION FOUND
LOGICAL UNIT COMMUNICATION FAILURE
LOGICAL UNIT COMUUNICATION TIME-OUT
LOGICAL UNIT COMMUNICATION PARITY ERROR
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
TRACK FOLLOWING ERROR
TRACKING SERVO FAILURE
FOCUS SERVO FAILURE
SPINDLE SERVO FAILURE
ERROR LOG OVERFLOW
WARNING
WARNING-SPECIFIED TEMPERATURE EXCEEDED
WARNING-ENCLOSURE DEGRADED
WRITE ERROR
WRITE ERROR-RECOVERED WITH AUTO REALLOCATION
WRITE ERROR-RECOMMEND REASSIGNMENT
WRITE ERROR-RECOVERY NEEDED
WRITE ERROR-RECOVERY FAILED
WRITE ERROR-LOSS OF STREAMING
WRITE ERROR-PADDING BLOCKS ADDED
UNRECOVERED READ ERROR
CIRC UNRECOVERED ERROR
RANDOM POSITIONING ERROR
MECHANICAL POSITIONING ERROR
POSITIONING ERROR DETECTED BY READ OF MEDIUM
DATA SYNCHRONIZATION MARK ERROR
DATA SYNC ERROR-DATA REWRITTEN
DATA SYNC ERROR-RECOMMEND REWRITE
DATA SYNC ERROR-DATA ATUO-REALLOCATED
DATA SYNC ERROR-RECOMMEND REASSIGNMENT
RECOVERED DATA WITH NO ERROR CORRECTION APPLIED
RECOVERED DATA WITH RETRIES
RECOVERED DATA WITH POSITIVE HEAD OFFSET
RECOVERED DATA WITH NEGATIVE HEAD OFFSET
RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED
RECOVERED DATA USING PREVIOUS SECTOR ID
RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED
RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT
RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE
RECOVERED DATA WITHOUT ECC - DATA REWRITTEN
RECOVERED DATA WITH ERROR CORRECTION APPLIED
RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED
RECOVERED DATA - DATA AUTO-REALLOCATED
RECOVERED DATA WITH CIRC
RECOVERED DATA WITH L-EC
RECOVERED DATA - RECOMMEND REASSIGNMENT
RECOVERED DATA - RECOMMEND REWRITE
RECOVERED DATA WITH ECC - DATA REWRITTEN
DEFECT LIST NOT ERROR
DEFECT LIST NOT AVAILABLE
DEFECT LIST ERROR IN PRIMARY LIST
DEFECT LIST ERROR IN GROWN LIST
PARAMETER LIST LENGTH ERROR
SYNCHRONOUS DATA TRANSFER ERROR
DEFECT LIST NOT FOUND
PRIMARY DEFECT LIST NOT FOUND
GROWN DEFECT LIST NOT FOUND
MISCOMPARE DURING VERIFY OPERATION
INVALID COMMAND OPERATION CODE
LOGICAL BLOCK ADDRESS OUT OF RANGE
INVALID ADDRESS FOR WRITE
INVALID FIELD IN CDB
LOGICAL UNIT NOT SUPPORTED
INVALID FIELD IN PARAMETER LIST
PARAMETER NOT SUPPORTED
PARAMETER VALUE INVALID
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
26
26
27
27
27
27
27
27
27
28
29
29
29
29
29
2A
2A
2A
2A
2B
2C
28
29
2A
2A
2C
2C
2C
2C
2E
2F
30
30
30
30
30
30
30
31
31
32
32
35
35
35
35
35
37
39
3A
3A
3A
3D
3E
3E
3E
3F
3F
3F
3F
40
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
51
51
53
53
55
57
03
04
00
01
02
03
04
05
06
00
00
01
02
03
04
00
01
02
03
00
00
00
00
00
01
00
03
04
05
00
00
00
01
02
05
06
08
09
00
01
00
01
00
01
02
03
04
00
00
00
01
02
00
00
01
02
00
01
02
03
NN
00
00
00
00
00
00
00
00
00
00
NN
00
00
01
00
02
00
00
THRESHOLD PARAMETERS NOT SUPPORTED
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION
WRITE PROTECTED
HARDWARE WRITE PROTECTED
LOGICAL UNIT SOFTWARE WRITE PROTECTED
ASSOCIATED WRITE PROTECT
PERSISTENT WRITE PROTECT
PERSISTENT WRITE PROTECT
CONDITIONAL WRITE PROTECT
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
POWER ON OCCURRED
SCSI BUS RESET OCCURRED
BUS DEVICE RESET FUNCTION OCCURRED
DEVICE INTERNAL RESET
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
LOG PARAMETERS CHANGED
RESERVATIONS PREEMPTED
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT
COMMAND SEQUENCE ERROR
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
COMMAND SEQUENCE ERROR
CURRENT PROGRAM AREA IS NOT EMPTY
CURRENT PROGRAM AREA IS EMPTY
PERSISTENT PREVENT CONFLICT
INSUFFICIENT TIME FOR OPERATION
COMMANDS CLEARED BY ANOTHER INITIATOR
INCOMPATIBLE MEDIUM INSTALLED
CANNOT READ MEDIUM - UNKNOWN FORMAT
CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM
CANNOT WRITE - APPLICATION CODE MISMATCH
CURRENT SESSION NOT FIXATED FOR APPEND
MEDIUM FORMAT CORRUPTED
FORMAT COMMAND FAILED
NO DEFECT SPARE LOCATION AVAILABLE
DEFECT LIST UPDATE FAILURE
ENCLOSURE SERVICES FAILURE
UNSUPPORTED ENCLOSURE FUNCTION
ENCLOSURE SERVICES UNAVAILABLE
ENCLOSURE SERVICES TRANSFER FAILURE
ENCLOSURE SERVICES TRANSFER REFUSED
ROUNDED PARAMETER
SAVING PARAMETERS NOT SUPPORTED
MEDIUM NOT PRESENT
MEDIUM NOT PRESENT - TRAY CLOSED
MEDIUM NOT PRESENT - TRAY OPEN
INVALID BITS IN IDENTIFY MESSAGE
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
LOGICAL UNIT FAILURE
TIMEOUT ON LOGICAL UNIT
TARGET OPERATING CONDITIONS HAVE CHANGED
MICROCODE HAS BEEN CHANGED
CHANGED OPERATING DEFINITION
INQUIRY DATA HAS CHANGED
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
MESSAGE ERROR
INTERNAL TARGET FAILURE
SELECT OR RESELECT FAILURE
UNSUCCESSFUL SOFT RESET
SCSI PARITY ERROR
INITIATOR DETECTED ERROR MESSAGE RECEIVED
INVALID MESSAGE ERROR
COMMAND PHASE ERROR
DATA PHASE ERROR
LOGICAL UNIT FAILED SELF-CONFIGURATION
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)
OVAERLAPPED COMMANDS ATTEMPTED
ERASE FAILURE
ERASE FAILURE - Incomplete erase operation detected
MEDIA LOAD OR EJECT FAILED
MEDIUM REMOVAL PREVENTED
SYSTEM RESOURCE FAILURE
UNABLE TO RECOVER TABLE-OF-CONTENTS
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
5A
5A
5A
5A
5B
5B
5B
5B
5D
5D
5D
5D
5E
5E
5E
5E
5E
63
64
64
65
72
72
72
72
72
72
73
73
73
73
73
73
73
B6
B9
80
00
01
02
03
00
01
02
03
00
01
03
FF
00
01
02
03
04
00
00
01
00
00
01
02
03
04
05
00
01
02
03
04
05
06
00
00
FF
OPERATOR REQUEST OR STATE CHANGE INPUT
OPERATOR MEDIUM REMOVAL REQUEST
OPERATOR SELECTED WRITE PROTECT
OPERATOR SELECTED WRITE PERMIT
LOG EXCEPTION
THRESHOLD CONDITION MET
LOG COUNTER AT MAXIMUM
LOG LIST CODES EXHAUSTED
FAILURE PREDICTION THRESHOLD EXCEEDED -
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Spare Area Exhaustion
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
LOW POWER CONDITION ON
IDLE CONDITION ACTIVATED BY TIMER
STANDBY CONDITION ACTIVATED BY COMMAND
IDLE CONDITION ACTIVATED BY COMMAND
STANDBY CONDITION ACTIVATED BY COMMAND
END OF USER AREA ENCOUNTERED ON THIS TRACK
ILLEGAL MODE FOR THIS TRACK
INVALID PACKET SIZE
VOLTAGE FAULT
SESSION FIXATION ERROR
SESSION FIXATION ERROR WRITING LEAD-IN
SESSION FIXATION ERROR WRITING LEAD-OUT
SESSION FIXATION ERROR - INCOMPATIBLE TRACK IN SESSION
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
NO MORE RZONE RESERVATIONS ARE ALLOWED
CD CONTROL ERROR
POWER CALIBRATIOIN AREA ALMOST FULL
POWER CALIBRATION AREA IS FULL
POWER CALIBRATION AREA ERROR
PROGRAM MEMORY AREA UPDATE FAILURE
PROGRAM MEMORY AREA/RMA IS FULL
PROGRAM MEMORY AREA/RMA IS (almost) FULL
MEDIA LOAD/EJECT MECHANISM FAILED
PLAY OPERATION ABORTED
VENDOR SPECIFIC
Specifications
DVD Recorder Drive: DVD-+R/RW/DL CD-R/RW Recorder
Power Source:
Weight:
115V/230V 50-60Hz switchable power supply
58 pounds (each)
Dimensions:
Power supply:
Environment:
7.48” (W) x 16.75” (D) x 24.5” (H)
400W (each)
Temperature: 40°C (104°F) / 5°C (41°F)
Humidity: 20% - 80%
Supported Formats
CD-ROM Mode 1, CD-ROM XA Mode 2 (form 1, form 2),
Photo CD, CD-DA (Audio CD), CD-Extra, CD-R, CD-RW
DVD-ROM, DVD-+R/RW/DL, DVD-VIDEO
700MB
CD
Recording format
DVD
CD
Recording capacity (nominal)
Applicable media
4.7GB for General DVD
8.3GB for Dual Layer
DVD
CD
CD-R, CD-RW
DVD
DVD-+R, DVD-+RW, DVD-+R DL
Firmware Updates
Occasionally it may be necessary to load updated firmware on to the DVD Premium Pro Series
duplicator. Only those firmware versions recommended and provided by Microboards Technical
Support for this specific product should be installed. Installation of an incorrect firmware on any
Microboards Technology product may result in any remaining warranty being voided.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Premium Pro Series
MICROBOARDS TECHNOLOGY, LLC
Technical Support
For technical questions or support issues, contact Microboards Technology technical support:
United States
PH: 952-556-1639
FAX: 952-556-1628
Europe
PH: +44 (0) 845 230 7800
Japan
PH: 03-3561-2266
Please have the Model and Serial Number of your duplicator available when contacting Technical
Support.
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s
authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and antenna
Connect the equipment into an outlet on a circuit different than that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European
standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive
93/68/EEC.
Canadian Department of Communications (DOC) Statement
This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est conforme a
la norme NMB-003 du Canade.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|