Micro Innovations Digital Camera Micro Webcam Matrix User Manual |
Micro Webcam Matrix
Users Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
WELCOME…………………………………………………………........ PAGE 3
INSTALLING THE CAMERA………………………………….............
PAGE 4-5
TROUBLESHOOTING AND TECHNICAL SUPPORT……………... PAGE 6
HELPFUL HINTS……………...........................................................
WARRANTY INFORMATION………………………………...............
PAGE 7-8
PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations on the purchase of your new Micro Innovations Webcam Matrix.
This manual will help guide you through the setup process and answer any
questions you may have regarding your webcam.
Package Contents
·
·
·
·
·
Micro Webcam Matrix
USB Connector
Warranty Information
User’s Manual
CD-ROM with Driver
System Requirements
·
·
·
·
Pentium IBM or 100% Compatible PC
Windows ME/2000/XP
Available USB Port
Available CD-ROM Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE CAMERA
NOTE: Please insert the CD-ROM and install the driver and software
before plugging in the camera!
Software Installation
STEP 1 - Insert the CD into your CD-ROM drive. The Setup Wizard will
appear on your computer screen. Note: If the Setup Wizard does not
appear, click Start and select Run. Type <Drive Letter>:\Setup and press
Enter. (Example: if the disk is in drive D, you would type D:\Setup)
STEP 2 – Follow the onscreen instructions to install the driver and software
applications. There are several software applications included on the CD. You
can install any or all of them easily during this phase of the software installation.
Note:If you are installing this device running Windows XP, you may encounter a
notification stating that this device has not passed Windows XP Logo Testing.
Select Continue Anyway to complete the installation.
STEP 3 – When the software installation is complete, click Finish to close
the installation program.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation
STEP 1 - Insert the USB connector into an available USB port or hub located
on your computer.
STEP 2 – A Found New Hardware wizard will appear. Follow the onscreen
instructions, clicking Next to install the hardware.
Note: If you are installing this device running Windows XP, you may encounter a
notification stating that this device has not passed Windows XP Logo Testing.
Select Continue Anyway to complete the installation.
Continue to follow the on-screen prompts until your camera installation is
complete. Click Finish to close the wizard.
Camera Care
Keep all beverages away from the camera working area and avoid any spills.
Maintaining your Micro Webcam Matrix will ensure longer life and will minimize the
chances of causing damage to your camera and computer. There are no user
serviceable parts. Only Micro Innovations may service or repair this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
·
If your camera is not recognized in Windows, be sure to check that the USB
connector is securely connected into the back of your computer. You may
have installed the driver with the camera plugged in. Uninstall the driver,
unplug the camera, and then reinstall the driver. Then reinstall the camera
hardware as directed in the Hardware Installation section.
·
·
You may have connected your camera while the computer was turned off.
Turn your computer on, and disconnect and reconnect the USB connector.
Windows 95 and Windows NT users: These operating systems do not
support USB. This camera is not compatible with Windows 95 or Windows
NT. This camera model is also not supported in Windows 98/98SE.
Technical Support and Service
For technical assistance call toll free: 1(877) 550-5534 or visit our website:
Technical Support Hours of Operation: Monday – Friday, 8:30am – 7:00pm Eastern
Standard Time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints
The following hints will help you achieve the best results with your Micro
Webcam Matrix:
Camera placement
·
·
Position the camera so that the subject is centered.
Place the camera on a steady surface.
Lighting
·
·
·
Use sufficient lighting.
Place the light source behind the camera and facing the subject.
Maintain a consistent lighting environment, i.e. do not mix fluorescent
lighting and other lighting types.
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus
For a sharper image, adjust the focus of your Micro Webcam Matrixby
rotating the focus ring located on the front of your camera.
·
Maintenance
·
·
Keep the camera away from moisture and extreme temperature.
Never use harsh or abrasive cleaners or organic solvents on the
camera or on any of its parts.
·
Never disassemble or touch the inside of the camera.
To Clean Your Camera Lens
·
·
Blow gently on the lens to remove any dust and/or dirt.
Wipe the lens gently with a soft lint-free cloth or an unthreaded lens-
cleaning tissue.
·
·
Do not use a cleaning solution unless it is designed specifically for
camera lenses.
Do not wipe the camera lens with chemically treated eyeglass lens
tissues as they may scratch the lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
Charge to the purchaser for parts or labor for the time periods.
This warranty does not apply to a ny appearance items of the product nor to the additional excluded item set forth below nor to any product
the exterior of which has been damaged or defaced which has been subjected to misuse, abnormal service or handling or which has been
altered or modif ied in design or construction.
The limited warranty described herein is in addition to law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OFMERCHANTABILITY AND
FITNESS FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration
of any warranties beyond the time period described herein on the behalf of Micro Innovations.
The warranties described herein shall be the sole and exclusive warranties granted by Micro Innovations and shall be the sole and exclusive remedy available to
the purchaser corrections of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Micro
Innovations to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract negligence, strict liability or otherwise. In no event
shall Micro Innovations be liable or in any way responsible, for any incidental of consequential economic or property damage. Some states do not allow the exclusion of incidental or
consequential damages, so the above exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
Warranty Period: Lifetime on parts and labor from date of purchase
Where to ship: Micro Innovations, 400 Clearview Ave, Edison NJ 08837
Enclose $5.95 for Shipping and Handling.
Download from Www.Somanuals.com. All Manuals Search And Download.
|