1
1
2
3
4
5
9
8 7
6
0
!
@
6 x R14 • UM-2 • C-CELLS
2
7
Meet Magnavox at the Internet
3
4
5
X
MCS 210SL/211BK
CLASS 1
LASER PRODUCT
PROG
6
PROG
Printed in China
W
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Controls
Power Supply Power Supply
General Operation CD player
Top and front panels (see 1)
Power supply
Using AC Power
General operation
CD player
4 To pause playback, press
Whenever convenient, use the power
PLAY/ PAUSE 2;.
Display indication for CD functions:
OO: Cd door open
1 STOP 9 – stops CD playback;
supply if you want to conserve battery
life. Make sure you remove the plug from
the set and wall outlet before inserting
batteries.
1 Check if the power voltage, as shown on
the type plate located on the bottom of
the set, corresponds to your local power
supply. If it does not, consult your dealer
or service center.
1 To select your sound source, adjust the
erases a CD program
source selector to CD, FM or AM.
–
–
➜ 2 flashes.
2 PLAY/PAUSE 2; – starts or pauses
2 Adjust the sound with the VOLUME
--: reading disc contents / no disc/ error 5 To resume, press PLAY/ PAUSE 2;
CD playback
control.
in CD operation or with the CD/
CD-R/W is blank or not finalized
(seeTroubleshooting)
again.
Batteries (not included)
3 CD display – shows the CD functions
4 LIFTTO OPEN – opens the CD door
5 VOLUME – adjusts volume level
1 Open the battery compartment and
insert six batteries, type R-14, UM2 or
C-cells, (preferably alkaline) with the
correct polarity as indicated by the "+"
and "-" symbols inside the compartment.
2 Connect the power cord to the
AC MAINS inlet and the wall outlet.The
power supply is now connected and
ready for use.
3 To switch off the set, adjust the source
6 To stop CD play, press STOP 9.
selector to OFF position.
–
–
In stop mode: total track number
7 To switch off the set, adjust the source
selector to OFF position and check if
the cassette keys are released.
Tuner reception
During CD playback: 9 and current
3 To switch off completely, unplug the
1 Adjust the source selector to FM or
track number
6 PROGRAM – programs and reviews
2 Replace the compartment door, making
sure the batteries are firmly and correctly
in place.The set is now ready to operate.
power cord from the wall outlet.
AM.
Note: CD play will also stop when:
-- you open the CD compartment;
-- you select FM or AM sound source;
-- the CD has reached to the end.
programmed track numbers
–
–
2: playback on pause
•
Unplug the power cord from the wall
outlet to protect your set during heavy
thunderstorms.
2 Turn TUNING to tune to a station.
7 SEARCH ∞, § – CD: skips or searches
PROG: when CD program active
a passage/track backward or forward.
Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to
burst.Therefore:
•
•
For FM, pull out the telescopic antenna.
Incline and turn the antenna. Reduce its
length if the signal is too strong (very
close to a transmitter).
Playing a CD
This CD player plays Audio Discs including
CD-Recordables and Rewritable.
Selecting a different track
During playback you can use ∞/ § to
select a particular track.
8 TUNING – tunes to a station
The type plate is located on the
bottom of the set.
9 Source selector OFF/FM/AM/CD
– select CD, FM or AM source of sound
– power off switch
•
Do not mix battery types: e.g. alkaline
with carbon zinc. Only use batteries of
the same type for the set.
For AM, the set is provided with a built-in
antenna so the telescopic antenna is not
needed. Direct the antenna by turning the
whole set.
•
MP3 CD-ROMs, CD-I, CDV,VCD, DVD or
computers CDs are not possible for
playback.
–
•
If you have selected a track number in the
stop or pause position, press PLAY/
PAUSE 2; to start playback.
Switching Power on/off:
Save energy
Whether you are using mains or battery
supply, to avoid unnecessary energy
consumption, always adjust the source
selector to OFF after using the set.
Back panel
•
•
When inserting new batteries, do not try
to mix old batteries with the new ones.
1 Adjust the source selector to CD.
Press § once briefly for the next track,
or press repeatedly until the desired track
number appears in the display.
10 Telescopic antenna – to improve FM
3 To switch off the radio, adjust the source
reception
selector to OFF position.
2 Open the CD door, and insert a CD/
CD-R/W with the printed side facing up
and press the CD door gently close.
Remove the batteries if the set is not to
be used for a long time.
11 Battery door – open to insert 6 x 1.5V
•
•
Press ∞ once briefly to return to the
beginning of a current track.
R14/ UM2/ C-cell batteries
3 Press PLAY/ PAUSE 2; on the set to
12 AC MAINS – inlet for power cord
start playback.
Press ∞ more than once briefly for a
previous track.
CD player
Maintenance
Troubleshooting
Finding a passage within a
track
4 Repeat steps 2 to 3 to select and store all
Maintenance (see 7)
•
•
Always shut the CD door to keep the
CD compartment dust-free.To clean, dust
the compartment with a soft dry cloth.
If a fault occurs, first check the points listed below before taking the set for
repair.
desired tracks in this way.
CD player and CD handling
1 During playback, press and hold down ∞/ ➜ If you attempt to store more than
•
•
The lens of the CD player should never
be touched!
If you are unable to remedy a problem by following these hints, consult your
dealer or service centre.
§.
20 tracks, no track can be selected and
the display will review your programmed
tracks.
To take a CD out of its box, press the
center spindle while lifting the CD. Always
pick up the CD by the edge and replace
the CD back in its box after use to avoid
scratching and dust.
•
The CD is played at high speed and low
volume.
Sudden changes in the surrounding
temperature can cause condensation to
form and the lens of your CD player to
cloud over. Playing a CD is then not
possible. Do not attempt to clean the lens
but leave the set in a warm environment
until the moisture evaporates.
WARNING: Under no circumstances should you try to repair the set
yourself, as this would invalidate the warranty.
5 To play your program,
2 When you recognize the passage you
press PLAY/ PAUSE 2;.
Problem
Solution
want release ∞/ §.
•
•
To clean the CD, wipe in a straight line
from the center towards the edge using a
soft, lint-free cloth. Do not use cleaning
agents as they may damage the disc.
To review your set program
In the stop position, press PROGRAM
once.
No sound/power
– Volume not adjusted. Adjust the VOLUME.
– Power cord not securely connected.
Connect AC power cord properly.
– Batteries dead /incorrectly inserted.
Insert (fresh) batteries correctly.
3 Normal playback resumes.
Note:When searching within a final track
and you reach the end of the last track, the ➜ Display shows the stored tracks in
CD goes to stop mode.
Never write on a CD or attach any
stickers to it.
sequence.
Display does not function
properly/ No reaction to
operation of any of the
controls
– Electrostatic discharge.
Switch off and unplug the set.
Reconnect after a few seconds.
Programming track numbers
You may store up to 20 tracks in the
desired sequence. If you like, store any
track more than once.
Erasing a program
You can erase the contents of the
memory by:
–
press STOP 9 (twice during playback or
once in the stop position;
Display and CD playback
does not work
– No CD inserted. Insert a CD.
– CD badly scratched/ dirty.
1 In the STOP position, press
PROGRAM to activate programming.
Replace/ clean CD (see Maintenance).
– Laser lens steamed up.
Wait until lens has acclimatized.
– CD-R/W is blank or not finalized.
Use a finalized CD-R/W or suitable audio disc only.
–
–
selecting FM or AM sound source;
opening the CD door.
➜ Display: shows 01 indicating the start of
the program. PROG and 01 flash.
2 Press ∞ or § to select your desired
➜ Display: PROG disappears.
track number.
The CD skips tracks
– Disc damaged or dirty. Replace or clean disc.
– Program is active.
3 Press PROGRAM to store the desired
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily
Quit program mode.
track number.
separated into three materials: cardboard, polystyrene and plastic.
➜ Display shows 02 and flashes (up to 20
in sequence) indicating the next available
program location.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
12.
Use only with a cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold
with the apparatus.When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
• Once your Magnavox purchase is
registered, you’re eligible to receive all
the privileges of owning a Magnavox
product.
• So complete and return theWarranty
Registration Card enclosed with your
purchase at once.And take advantage
of these important benefits.
Warranty
Owner
Model
6. Clean only with a dry cloth.
7. Do not block any of the ventilation
Verification
Confirmation Registration
Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Magnavox warranty.
Your completed Warranty
Registration Card serves
as verification of
Returning your Warranty
Registration Card right
away guarantees you’ll
receive all the information
and special offers which
you qualify for as the
openings. Install in accordance with 13. Unplug this apparatus during lightning
the manufacturers instructions.
storms or when unused for long periods
8. Do not install near any heat
of time.
ownership in the event of
product theft or loss.
sources such as radiators, heat registers, 14. Refer all servicing to qualified service
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as if the power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus, or
when the apparatus has been exposed to
rain or moisture, does not operate
owner of your model.
safety purpose of
the polarized or
AC Polarized
Plug
Know these
For Customer Use
grounding-type plug. A polarized plug has
two blades with one wider than the other.
A grounding type plug has two blades and
a third grounding prong.The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
safety
symbols
Enter below the Serial No. which is located
on the bottom of the cabinet. Retain this
information for future reference.
normally, or has been dropped.
CAUTION
15.Battery usage CAUTION –To
prevent battery leakage which may result
in bodily injury or damage to the unit:
G
G
G
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Model No. _________________________
Serial No. _________________________
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
10.Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments/accessories
specified by the manufacturer.
This “bolt of lightning”
indicates uninsulated material
within your unit which may
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
cause an electrical shock. For the safety
of everyone in your household, please
do not remove product covering.
EL 6475-E003: 01/6
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
The “exclamation point” calls
attention to features for which
you should read the
enclosed literature closely to prevent
operating and maintenance problems.
Class II equipment symbol
This symbol indicates that the unit has a double insulation system.
LIMITED WARRANTY
Notes
PORTABLE AUDIO
90 Days Free Exchange
This product must be carried in for an exchange.
CAUTION
WHO IS COVERED?
BEFORE REQUESTING EXCHANGE…
You must have proof of purchase to exchange the product. Please check your owner’s manual before requesting an
Use of controls or adjustments or performance of procedures other than
herein may result in hazardous radiation exposure or other unsafe operation.
A sales receipt or other document showing that you
purchased the product is considered proof of purchase.
Attach it to this owner’s manual and keep both nearby.
exchange.Adjustments of the controls discussed there
may save you a trip.
EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO, OR U.S.VIRGIN ISLANDS…
Contact 1-800-705-2000 to arrange an exchange. Or, ship
the product, insured and freight prepaid, and with proof
of
WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For 90 days thereafter, a defective or inoperative product
will be replaced with a new, renewed or comparable
product at no charge to you.A replacement product is
covered only for the original warranty period.When the
warranty on the original product expires, the warranty on
the replacement product also expires.
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is
subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may
cause undesired operation.
purchase enclosed, to the address listed below.
Magnavox Exchange Program
Suite A
406 North Irish Street
Greeneville TN 37745
WHAT IS EXCLUDED?
Your warranty does not cover:
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied
warranties, including implied warranties of
merchantability and fitness for a particular purpose, are
limited in duration to the duration of this express
warranty. But, because some states do not allow
limitations on how long an implied warranty may last, this
limitation may not apply to you.)
•
labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of
the product.
product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause
not within the control of Magnavox.
Canada
•
English:This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
EXCHANGING A PRODUCT IN CANADA…
Please contact Magnavox at:
•
•
reception problems caused by signal conditions or
cable or antenna systems outside the unit.
a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
incidental or consequential damages resulting from
the product. (Some states do not allow the exclusion
of incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is
not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or
fitness for a particular purpose. Magnavox is not liable
under any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever incurred,
even if notified of the possibility of such damages.)
Français: Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de Classe B prescrites dans le Régelement
sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada.
•
REMEMBER…
•
a product used for commercial or institutional
purposes.
Please record below the model and serial numbers found
on the product.Also, please fill out and mail your
warranty registration card promptly. It will be easier for
us to notify you if necessary.
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the
product is officially distributed by Magnavox. In countries
where Magnavox does not distribute the product, the
local Magnavox service organization will attempt to
provide a replacement product (although there may be a
delay if the appropriate product is not readily available).
MODEL # __________________________________
SERIAL #
__________________________________
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171
EL6516T001 / 5-02
Download from Www.Somanuals.com. All Manuals Search And Download.
|