R
Installation
and Operations
Manual
POWER
EJECT
IR
4 X 50 WATTS
ELAPSE
VOLUME
PUSH SEL/
MENU
MODE
AS/PS
DIM
/ II
LOUD
MUTE
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
EQ
DISP
ENTER
BAND
MEMORY
PROGRAM
REPEAT
SHUFFLE
INTRO
W-BND
DISC/CAT
M9900CDS
AM / FM / WB and CD Stereo Receiver
U.S. Patent No. D486,815
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Locations and Functions
5. Multi-Function Button #2:
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #2 (CH2).
Push and release when recalling preset radio station #2.
CD Mode: Push to play programmed CD tracks (see CD Operation for more information, page 6-7).
CD Changer Mode: Push to change to a higher number disc in the CD changer.
Sirius Satellite Radio Mode: Push to scroll through the Sirius Radio playback categories.
6. Multi-Function Button #3:
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #3 (CH3).
Push and release when recalling preset radio station #3.
CD Mode: Push to repeat a CD track. Push again to cancel.
CD Changer Mode: Push to repeat a CD track. Push again to cancel.
Push and hold to repeat the entire disc. Push again to cancel.
7. Multi-Function Button #4:
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #4 (CH4).
Push and release when recalling preset radio station #4.
CD Mode: Push to play all the tracks on the CD in random order. Push again to cancel.
CD Changer Mode: Push to play all the tracks on the CD in random order. Push again to cancel.
Push and hold to play all the CDs in random order. Push again to cancel.
8. Multi-Function Button #5:
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #5 (CH5).
Push and release when recalling preset radio station #5.
CD Mode: Push to preview each track on the CD for 10 seconds. Push again to cancel.
CD Changer Mode: Push to preview each track on the CD for 10 seconds. Push again to cancel.
Push and hold to preview each track on every CD for 10 seconds. Push again to cancel.
9. Band Button: Push to select F1, F2, F3, AM1, AM2 or W (weather band).
10. Weather Band Radio Button: Push to instantly access the weather band radio. Push mode to return to
previous source.
11. Reset Button: Push to reset the unit to it’s “DEFAULT” settings.
12. Display Button: Push to display the frequency in radio mode or track in CD mode. Push and hold to
perform clock setting functions (See Clock Setting for more information, page 6)
13. Equalizer Button: Push to choose between preset sound equalization settings.
14. Mute Button (CD Play/Pause) Button:
Radio and Sirius Satellite Radio Mode: Push to mute volume level. Push again to restore volume.
CD and CD Changer Mode: Push to pause disc play, push again to resume play.
15. Loud (Dim Button): Push and release to boost high and low tones at low volume levels. Push and
hold to dim or restore backlight of display.
16. AS/PS (CD Elapse Button):
Radio Mode: Push for automatic memory storing and preset scan.
CD and CD Changer Mode: Push to display running time/remain time of a CD track.
17. Mode Button: Push to change the play source: Radio, Sirius Satellite Radio, CD, CD Changer or
Auxiliary Sources.
18. Eject Button: Push to eject a CD.
19. CD Slot: To play a CD, insert CD into slot with label facing up.
20. Display Area: This area displays all function information for the radios, clock and CD players.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
POWER
Turning the Unit On and Off: Push the Power button.
Selecting Play Source: Push the Mode button to choose a play source:
Radio, Sirius Satellite Radio (if equipped), CD, External CD Changer (if
equipped or Auxiliary Sources (if equipped).
MODE
AS/PS
DIM
/ II
Dimming the Display: Push and hold the LOUD button to dim the backlight
of the display. Push and hold again to return to normal illumination.
LOUD
MUTE
AM/FM Radio Operation
AM/FM Bands: Push BAND button to select a radio band: F1, F2, F3, AM1,
AM2 or W (weather band).
BAND
W-BND
TUNE/TRACK/CH
Manual Tuning:
PUSH
SCAN/S-MOD
1. Rotate the TUNE knob left or right and hold until “MANUAL” appears
in the display, then release knob.
2. Rotate the TUNE knob again left or right until the desired radio sta-
tion appears in the display.
TUNE/TRACK/CH
PUSH
Scan Tuning: Push the TUNE knob to have the radio automatically scan
every 5 seconds for a different radio station. To stop scanning push the
TUNE knob again.
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
Seek Tuning: Rotate the TUNE knob left or right, then release to seek for a
different radio station.
Preset AM/FM Radio Stations
Programming AM/FM Radio Stations: You can program up to 15 FM radio
stations and 10 AM radio stations.
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
BAND
W-BND
2. Tune to the desired radio station (see AM/FM Radio Operation above
for more details).
3. Push and hold one of the five STATION RECALL buttons
until a short "beep" is heard. The corresponding preset
MEMORY
PROGRAM
REPEAT
SHUFFLE
INTRO
button number now appears in the lower right hand cor-
ner of the display.
4. To program additional preset stations, repeat this procedure using the
other STATION RECALL buttons.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Preset AM/FM Radio Stations
Automatically Programming AM/FM Radio Stations: You can program up to 15
FM radio stations and 10 AM radio stations automatically.
BAND
MODE
W-BND
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
ELAPSE
AS/PS
2. Push and hold AS/PS button until the display starts scanning for a
radio station. The radio will automatically program the 5 strongest sta-
tion into preset memory.
Recalling AM/FM Radio Stations:
BAND
W-BND
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
2. Push button 1, 2, 3, 4 or 5 to recall a pre-programmed
radio station.
MEMORY
PROGRAM
REPEAT
SHUFFLE
INTRO
Automatically Recalling AM/FM Radio Stations:
BAND
MODE
W-BND
AS/PS
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
2. Push the AS/PS button and release to automatically scan every 5 seconds
the through pre-programmed radio stations. To stop scanning push the
AS/PS button again.
Weather Band Radio Operation
Weather Band: Push W-BND button to immediately access the weather band.
The radio will search for the strongest weather band signal in your area.
BAND
W-BND
Scan Tuning: Push the TUNE button (3) to scan every 5 seconds through all
7 weather band stations. To stop scanning push the TUNE knob again.
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
Sound Controls
VOLUME
PUSH SEL/
MENU
Volume Control: Rotate the VOLUME knob to the right to increase levels or
left to decrease levels.
VOLUME
PUSH SEL/
MENU
Bass, Treble, Balance and Fader Controls: Push and release the VOLUME knob
to scan between the different sound controls. Once the desired function is in
the display area rotate the knob left or right to achieve the desired level.
Bass Control: The bass control adjusts the amount of low frequency that
you hear.
4
X
50 WATTS
H
NU
SEL/
LOC
Treble Control: The treble control adjusts the amount of high frequency
that you hear.
USH
SCAN/S-MOD
VOLUME
Balance Control: The balance control adjusts the amount of sound output
to the left and right speakers.
PUSH SEL/
MENU
Fader Control: The fader control adjusts the amount of sound output to
the front and rear speakers.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Sound Controls
Equalizer: Push the EQ button to choose between preset equalizer settings:
Classic, Rock, DSP Off (digital sound processor off), Flat, Pop and Jazz,
as indicated in the display area.
EQ
DISP
Mute (CD Play/Pause) Button: Push the MUTE button to mute the radio
volume. If a CD is playing the MUTE button will pause the CD. Push the
MUTE button again to restore the volume or resume playing the CD.
LOUD
LOUD
MUTE
MUTE
Loudness: Push the LOUD button to boost high and low tones at low
volume levels.
Clock Setting
Display Button: Push and hold the DISP button until the clock is flashing in
the display.
EQ
DISP
TUNE/TRACK/CH
Adjusting the Minutes: Rotate the TUNE knob to the Left to adjust the Minutes.
PUSH
SCAN/S-MOD
Adjusting the Hours: Rotate the TUNE knob to the Right to adjust the Hours.
Note: the AM/PM indicators.
When correct time displays wait a few seconds to allow the time to program.
Minutes
Hours
CD Operation
Playing a CD: Insert a CD (label side up) into the CD slot. The CD will auto-
load and start playing.
Note: If a CD does not auto-load DO NOT FORCE into the slot, as you may
already have a CD loaded.
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
CD Track Selection: Rotate the TUNE knob left or right to change the track. The
track number will appear in the display.
DIM
/ II
MUTE
Pausing a CD: Push the MUTE button to “Pause” the disc, push again to
resume play.
LOUD
EJECT
Ejecting a CD: Push the EJECT button to to eject a disc.
Repeating a CD Track: Select the desired track to repeat then push the
REPEAT button until “S-RPT” appears in the display. The track on the disc
will play repeatedly. To cancel this feature push the REPEAT button until
“S-RPT” disappears from the display.
REPEAT
Random CD Track Play Order: Push the SHUFFLE button until “S-SHF” appears
in the display. The tracks on the disc will play in a random order. To cancel this
feature push the SHUFFLE button until “S-SHF” disappears from the display.
SHUFFLE
Preview CD Tracks: Push the INTRO button until “S-SCN” appears in the
display. Each track on the disc will play for 10 seconds. To cancel this fea-
ture push the INTRO button until “S-SCN” disappears from the display.
INTRO
ELAPSE
AS/PS
Elapse Times: Push the AS/PS button to display running time of CD track,
push the button again to display the time remaining on the CD track, push
one more time to display time remaining on CD.
MODE
6
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
CD Operation
Programming CD Tracks into Memory:
1. In the CD mode, push the MEMORY button once. “P-01”will be
displayed.
MEMORY
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
2. Select the desired track on the CD by rotating the TUNE knob.
3. Push the MEMORY button again to store that track into memory.
MEMORY
4. Repeat Steps 2 and 3 to store up to 30 tracks into memory.
Note: To clear program memory, push the MEMORY button once during
programmed playback. “CLEAR” will be displayed.
Playing Programmed CD Tracks:
1. Push the Program button to playback programmed tracks in memory.
“PGM” will appear in the upper right corner of the display. To return to
normal playback mode, push the PROGRAM button again.
PROGRAM
CD Changer Operation
Load CD’s: Insert the CD magazine into the external CD changer
Selecting the External CD Changer: Push the MODE button until “CDC”
MODE
AS/PS
appears in the display.
CD Selection: Push button 1 or 2 to scroll through the selection of CD’s in the
CD changer. If a CD is not in one of the trays, the unit will continue until the
next CD is found.
MEMORY
PROGRAM
DISC/CAT
TUNE/TRACK/CH
CD Track Selection: Rotate the TUNE knob left or right to change the track. The
PUSH
SCAN/S-MOD
track number will appear in the display.
Repeating a CD Track: Select the desired track to repeat then push and
release the REPEAT button and “RPT” appears in the display. The track
on the disc will play repeatedly. To cancel this feature push the REPEAT
button and “RPT” disappears in the display.
REPEAT
Repeating a CD: Select the desired CD to repeat then push and hold the
REPEAT button and “DPT” appears in the display. The disc will play
repeatedly. To cancel this feature push the REPEAT button and “DPT”
disappears from the display.
Random CD Track Play Order: Push and release the SHUFFLE button until
“SHF” appears in the display. The tracks on the disc will play in a random
order. To cancel this feature push the SHUFFLE button until “SHF”
disappears from the display.
Random CD Play Order: Push and hold the SHUFFLE button until “DSF”
appears in the display. The discs will play in a random order. To cancel this
feature push the SHUFFLE button until “DSF” disappears from the display.
SHUFFLE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
CD Changer Operation
Preview CD Tracks: Push and release the INTRO button until “SCN” appears
in the display. Each track on the disc will play for 10 seconds. To cancel
this feature push the INTRO button until “SCN” disappears from the display.
INTRO
Preview CDs: Push and hold the INTRO button until “DSN” appears in the
display. Each track on every disc will play for 10 seconds. To cancel this
feature push the INTRO button until “DSN” disappears from the display.
Sirius Satellite Radio Setup
Note: If your Sirius tuner is not activated, call 1-888-539-SIRIUS to activate. The Sirius Tuner ID Number
(ESN) is required during the activation process. Following the instructions below to access the Sirius
Tuner ID Number (ESN):
Accessing you Sirius Tuner ID Number (ESN):
MODE
AS/PS
1. Push the MODE button until “SIRIUS” appears in the display area.
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
2. Push the TUNE button until “DIRECT” appears in the display area. Wait a
few seconds and “CH 000” will then appear in the display.
3. Push the BAND button and the first 4 digits of the 12 digit Sirius Tuner ID
BAND
EQ
W-BND
Number (ESN) will be displayed.
4. Push the DISP button and the last 8 digits of your 12 digit Sirius Tuner
ID Number (ESN) will be displayed.
DISP
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
5. Push the TUNE button to exit.
Sirius Satellite Radio Operation
Please note that satellite radio signal may be blocked by trees, buildings, bridges or tunnels.
Selecting Sirius Satellite Radio: Push the MODE button until “SIRIUS”
MODE
AS/PS
appears in the display. Please be patient as it may take a minute to receive a
satellite signal.
TUNE/TRACK/CH
Manual Tuning:
PUSH
SCAN/S-MOD
1. Push the TUNE knob until “NORMAL” appears in the display.
2. Rotate the TUNE knob to select a station from 01-182.
TUNE/TRACK/CH
Category Tuning:
PUSH
SCAN/S-MOD
1. Push the TUNE knob until “CATEGORY” appears in the display.
2. Push button 1 or 2 to find the desired category.
MEMORY
PROGRAM
DISC/CAT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Sirius Satellite Radio Operation (Continued)
TUNE/TRACK/CH
Category Tuning (continued):
PUSH
SCAN/S-MOD
3. Rotate the TUNE knob and select a station.
TUNE/TRACK/CH
Direct Tuning:
PUSH
SCAN/S-MOD
1. Push the TUNE knob until “DIRECT” appears in the display.
2. Rotate the TUNE knob and select the first digit (0 or 1).
3. Push the TUNE knob again.
4. Rotate the TUNE knob and select the second digit (1-8).
5. Push the TUNE knob again.
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
6. Rotate the TUNE knob and select the third digit (1-9). The tuner will
start playing the station you have selected when the third digit stops
flashing.
Preset Sirius Satellite Radio Stations
Programming Satellite Radio Stations: You can program up to 20 Sirius
Satellite radio stations.
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
BAND
W-BND
2. Tune to the desired radio station (see Sirius Satellite Radio Operation
for more details).
3. Push and hold one of the five STATION RECALL buttons
until a short "beep" is heard. The corresponding preset
MEMORY
PROGRAM
REPEAT
SHUFFLE
INTRO
button number now appears in the lower right hand
corner of the display.
4. To program additional preset stations, repeat this procedure using the
other STATION RECALL buttons as desired.
Recalling Satellite Radio Stations:
BAND
W-BND
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Push button 1, 2, 3, 4 or 5 to recall a pre-programmed
radio station.
MEMORY
PROGRAM
REPEAT
SHUFFLE
INTRO
Automatically Recalling Satellite Radio Stations:
BAND
MODE
W-BND
AS/PS
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Push AS/PS button and release to automatically scan every 5 seconds
the pre-programmed radio stations. To stop scanning push the AS/PS
button again.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Skip Sirius Satellite Radio
Programming Channel Skip for Satellite Radio Stations: You can program
the radio to skip channels which you do not want.
1. Tune to the station to be skipped (see Sirius Satellite Radio Operation
for more details).
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
2. Push the TUNE knob until “SET SKIP” appears in the display.
ENTER
3. Push the BAND button and “SKIP” will appear flashing in the bottom of
the display. When the “SKIP” stops flashing the channel has been pro-
grammed to skip.
BAND
W-BND
TUNE/TRACK/CH
Release Channel Skip for Satellite Radio Stations:
PUSH
SCAN/S-MOD
1. Push the TUNE knob until “DIRECT” appears in the display.
2. Rotate the TUNE knob and select the first digit of the skipped channel (0
or 1).
TUNE/TRACK/CH
3. Push the TUNE knob again.
PUSH
SCAN/S-MOD
4. Rotate the TUNE knob and select the second digit of the skipped channel
(1-8).
5. Push the TUNE knob again.
6. Rotate the TUNE knob and select the third digit of the skipped channel
(1-9). The tuner will start playing the station you have selected when the
third digit stops flashing.
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
7. Push the TUNE knob until “SET SKIP” appears in the display. After a few
seconds the radio channel will appear in the display with “SKIP” flash-
ing at the bottom.
ENTER
8. Push the BAND button and “SKIP” will stop flashing in the bottom of the
display. When the “SKIP” disappears the channel has been released from
Channel Skip.
BAND
W-BND
Auxiliary Input
Selecting Auxiliary Input: Push the MODE button until “AUX1” or “AUX2”
appears in the display which indicates that the auxiliary unit is playing
through the M9900CDS.
MODE
AS/PS
Note: All sound controls (pages 5-6) are active when the Auxiliary source
is playing.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Speciality Features
Display Button: The factory default setting is clock display priority. Push the
DISPLAY button at any time will display the radio frequency, CD track,
AUX 1 or AUX 2.
EQ
DISP
Note: In the Sirius mode the factory default setting is Sirius channel dis-
play priority. Push the DISPLAY button at any time to display the
CN-NAME, SONG TITLE, ARTIST, CATEGORY and Clock. If clock is cho-
sen the time will be displayed for approximately 5 seconds then revert to
displaying the Category.
Reset Button: The radio panel or LCD display may fail to function normally
due to the vehicle’s battery condition, and may require resetting the radio
microprocessor if:
LOUD
MUT
DIS
• The vehicle has been “jump started” from a dead battery condition.
• The vehicle battery becomes very low and is quick-charged.
• The vehicle battery is removed and replaced.
EQ
ENTER
BAND
Should this condition occur, simply press and release the RESET button
on the radio panel using the tip of a ball point pen. This will reset the
radio microprocessor to the original factory settings. After pressing the
RESET button you should recheck to see if the radio functions normally.
All station programming should remain, but you will have to reset the
clock. Should the LCD display area show any abnormal error code, please
refer to the trouble shooting guide and solution chart below.
INTRO
W-B
Error Code Problem
Description
Possible Remedy
ERR 1
Mechanism Problem Unknown mechanical
problem with the CD
1. Eject the disc and try another.
2. Press the reset button.
3. Replace the unit.
mechanism.
ERR 2
TOC Reading Error
Laser can not read the
CD disc table of
contents.
1. Insert a different disc.
2. Check disc for excessive scratches.
3. Check disc for dirt and fingerprints.
Clean disc and reinsert.
ERR 3
ERR 4
Error from High
Ambient Temp.
The temperature of the Reduce the temperature inside the vehicle
mechanism is too high and try to play a CD at a later time.
to play CDs without
damaging them.
Laser Focus Error
Laser pickup fails to
1. Insert a different disc.
focus and read the disc. 2. Check disc for excessive scratches.
3. Check disc for dirt and fingerprints.
Clean disc and reinsert.
4. Press the reset button.
ERR 6
ERR 7
CD Loading Error
Laser Servo Error
The loading mechanism 1. Push the reset button.
is damaged.
2. Replace the unit.
Laser servo is not
functional.
1. Press the reset button.
2. Replace the unit.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Default Settings
The M9900CDS has a small group of settings that can be changed to suit your personalized requirement.
VOLUME
Button Confirmation Beep: The factory default setting is BEEP ON (a confirma-
tion beep every time a button or knob is pushed). To turn the beeps off, push
PUSH SEL/
MENU
and hold the VOLUME knob until “BEEP ON” is in the display then release.
Rotate the VOLUME knob until “BEEP OFF” is in the display. Wait a few
seconds, the radio will return to last radio mode selected.
Power Up Volume Level: The factory default setting for initial power-up volume
level is 12. To change the initial volume level, push and hold the VOLUME
VOLUME
PUSH SEL/
MENU
knob until “BEEP ON” is in the display then release. Push the VOLUME knob
until “P-VOL” is in the display. Rotate the VOLUME knob until the desired ini-
tial volume is achieved. Wait a few seconds, the radio will return to last radio
mode selected.
Radio Frequency Display: The factory default setting is USA. Do not change this
setting.
Clock Display When the Radio is Off: When the ignition key is on and the radio
is off, “clock display on” is the default setting. To change the setting to “clock
VOLUME
PUSH SEL/
MENU
display off”, push and hold the VOLUME knob until “BEEP ON” is in the dis-
play then release. Push the VOLUME knob until “CLK ON” is in the display.
Rotate the VOLUME knob until “CLK OFF” is in the display. Wait a few
seconds, the radio will return to last radio mode selected.
Display Priority: The factory default setting for display priority is “CLOCK”
VOLUME
PUSH SEL/
MENU
except in Sirius mode. To change the display priority (either radio frequency
priority or no priority), push and hold the VOLUME knob until “BEEP ON” is in
the display then release. Push the VOLUME knob until “CLOCK” is in the dis-
play. Rotate the VOLUME knob until “FREQ” or “NO PRI” is in the display. Wait
a few seconds, the radio will return to last radio mode selected.
Clock Type, 12 hour or 24 hour: The factory default setting is 12 hour clock with
AM and PM indication. To change the clock type to 24 hour military time,
push and hold the VOLUME knob until “BEEP ON” is in the display then
release. Push the VOLUME knob until “12 HOUR” is in the display. Rotate the
VOLUME knob until “24 HOUR” is in the display. Wait a few seconds, the
radio will return to last radio mode selected.
VOLUME
PUSH SEL/
MENU
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
White Wire with Black Stripe: Connect this wire to
the Left Front Speaker (-) negative terminal or wire.
S
tep 1: The radio chassis is designed to be “Sleeve
Mounted” through a opening in the dashboard panel.
The required opening size is 182mm (7-3/16") x
84mm (3-5/16"). Cut or engage an opening in the
dashboard to accommodate the mounting sleeve.
Green Wire with Black Stripe: Connect this wire to
the Left Rear Speaker (-) negative terminal or wire.
Green Wire: Connect this wire to the Left Rear
Speaker (+) positive terminal or wire.
Step 2: Insert the mounting sleeve into the hole
in the dashboard. Bend the metal tabs on the
sleeve to secure the mounting sleeve to the dash-
board.
Gray Wire: Connect this wire to the Right Front
Speaker (+) positive terminal or wire.
Gray Wire with Black Stripe: Connect this wire to the
Right Front Speaker (-) negative terminal or wire.
Step 3: Bring all wiring for the connection of the
unit (including the antenna) through the center of
the mounting sleeve. Connect the wiring as follows:
Purple Wire with Black Stripe: Connect this wire to
the Right Rear Speaker (-) negative terminal or wire.
Yellow Wire (w/Fuse): Connect this wire to a con-
stant +12 volt power source (a power source that
is not controlled by the ignition key).
Purple Wire: Connect this wire to the Right Rear
Speaker (+) positive terminal or wire.
Note: This unit is designed to connect to (4) four
speakers. If the installation only requires (2) two
speakers, use the White and Gray wire sets to con-
nect the speakers.
Red Wire: Connect this wire to a switched +12 volt
power source (a power source turned on and off
by the ignition key).
Blue Wire: Connect this wire to the (+) power
antenna activation circuit. If no power antenna
exists, tape-off the end of this wire to prevent
shorting out the unit.
WARNING! Any wires left unconnected must
be taped-off or capped off to prevent shorting.
DO NOT connect speaker ground wires together.
DO NOT connect speaker ground wires to the
chassis of the vehicle.
Black Wire: Connect this wire to the frame of the
vehicle (ground). This wire is the chassis ground-
ing wire for the unit.
DO NOT connect front and rear speaker wires
together.
White Wire: Connect this wire to the Left Front
Speaker (+) positive terminal or wire.
FAILURE TO FOLLOW ANY OF THESE WARNINGS
WILL RESULT IN DAMAGE TO THIS UNIT AND
VOIDS THE WARRANTY.
Sheet
Metal
Screw
Nut
Washer
POWER
VOLUME
PUSH SEL/
MENU
TUNE/TRACK
Metal Strap
Dashboard
LO
C
SCAN/SHIFT
ME
EJECT
M
OR
Y
PRO2
G
RA
M
ELAPSE
MO
D
D
3
REPE
AS
/
AT
IM
PS
4
LOU
S
H
/
II
D
U
FF
LE
MU
DI
T
5
SC
EQ
A
N
S
P
BA
N
D
W-
B
AN
Mounting Sleeve
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Connection
Right
Front Speaker
Right
Rear Speaker
-
+
+
-
Purple Wire: Rear Right Speaker (+)
Purple/Black Wire: Rear Right Speaker (-)
Gray/Black Wire: Front Right Speaker (-)
Gray Wire: Front Right Speaker (+)
Green Wire: Rear Left Speaker (+)
Green/Black Wire: Rear Left Speaker (-)
White/Black Wire: Front Left Speaker (-)
White Wire: Front Left Speaker (+)
-
+
+
-
Left
Front Speaker
Left
Rear Speaker
Black Wire: Ground
Blue Wire: Power Antenna
Red Wire: Ignition Switched 12 VDC
See Amplifier Instructions
for Proper Connections
Yellow Wire: 12 VDC Constant
1 AMP
Audio Amplifier
Sirius Tuner Connection (Optional)
M9900CDS
M9SIR
Male/Male Mini Din
(Supplied with Sirius Tuner)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Auxiliary Connection
Red (Right)
VCR
or
White (Left)
AUX 1
Yellow
Cable
TV
Audio Out
M9900CDS
AUX 2
Black
Cable
DVD
or
Red (Right)
White (Left)
Video
Game
CD Changer Connection
CD Changer
M9900CDS
Male/Male
(Supplied with CD Changer)
Black
Remote IR Sensor Connection (Optional)
M9900CDS
Remote IR Sensor
(Mounted In-Dash)
Black
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within one year from the date of sale
to you, repair, replace or refund the retail sales price of said product or any part thereof, at
the option of the Magnadyne Corporation or its authorized agents, if said product or part
is found defective in materials or workmanship, when properly connected and operating on
the correct power requirements designated for the specific product. This warranty and
Magnadyne Corporation or its authorized agent’s obligations hereunder do not apply where
the product was; damaged while in the possession of the consumer, subjected to unrea-
sonable or unintended use, not reasonably maintained, utilized in commercial or industrial
operations, or serviced by anyone other than Magnadyne Corporation or its authorized
agents, or where the warning seal on the product is broken or the power and/or plugs are
detached from the unit. Magnadyne Corporation or any of its authorized agents will not
assume any labor costs for the removal and reinstallation of any product found to be defec-
tive, or the cost of transportation to Magnadyne Corporation or its authorized agents. Such
cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in con-
nection with this product, or any damage to recording or recording tape, or any damage to
the products resulting from improper installation, alteration, accident, misuse, abuse or
acts of nature.
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND
ONE YEAR FROM THE DATE OF SALE.
This warranty extends only to the original purchaser of the product and is not
transferable. Some states do not allow limitations on how long an implied warranty lasts,
and some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may have other rights that vary from state to state.
“NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the User’s
authority to operate the equipment.”
Defective merchandise should be returned to the original point of purchase or
secondly, to Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220.
Return Authorization must be obtained before sending, or merchandise may be refused.
M9900CDS-UM Rev. D
© Copyright 2006
Magnadyne Corporation
4-26-06
Download from Www.Somanuals.com. All Manuals Search And Download.
|