Loewe Projector Individual Sound Projector User Manual

Operating Manual  
Audio  
Individual Sound Projector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Assist – Sound Projector Operation  
Sound on / off  
Switch on/off on standby................................. (page 13)  
LED indicator for current operating mode  
Switch over to operate TV  
Switch over to operate DVD recorder/Auro  
Switch over to operate TV Radio Digital  
Switch over to operate Sound Projector  
(page ꢀ1).............. Input mode AUTO, DTS or ANALOGUE  
(page ꢀ3).......................................................Night mode  
Sound mode.................................................... (page ꢀ0)  
Loewe TV: numbers or letters  
Loewe TV: numbers or characters  
(page ꢀ3)........................................................ Bass mode  
(page ꢀ3).........short: Test sound for loudspeaker setting;  
(page 13, 17)........................................long: Auto set-up  
(page ꢀ4)...........................................short: Sound menu;  
(page ꢀ0)......................................... long: Menu Memory  
(page 19)............................................................. Volume  
Input source (TV, AUX 1, ꢀ, 3).......................... (page 19)  
Surround mode................................................ (page ꢀꢀ)  
short: Channel volume; long: Menu language selection  
short: Hide menu  
long: Special Functions 1.................................. (page ꢀ4)  
Loewe TV: Station up/down  
MENU: select/set  
MENU: confirm menu selection  
1) Only for specialist staff  
(page ꢀꢀ)..........................Sound field programme "Film"  
(page ꢀꢀ)....................... Sound field programme "Music"  
Sound field programme "Sport"....................... (page ꢀꢀ)  
Sound field programme off.............................. (page ꢀꢀ)  
Loewe TV: Function depending on model  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 -  
 
Rear View  
Microphone input  
Mains connection  
Sound input left/right (analogue) AUX3  
Sound input left/right (analogue) TV  
Subwoofer output (nor for Loewe sound systems)  
Video input AUX1  
Video input AUXꢀ  
Component video input AUXꢀ  
Video input AUX3  
Component video input AUX3  
Video output  
Component video output  
Optical digital sound input AUXꢀ  
Optical digital sound input AUX1  
Digital sound input TV-COAXIAL  
free  
Loewe RS-ꢀ3ꢀC system interface  
Loewe Audio Link interface  
- 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Front view & Display  
On  
Volume  
quieter / louder (TV, AUX 1, ꢀ, 3)  
Input source  
Display  
Infrared  
receiver  
Off  
(page 19)  
(page 19)  
in Standby  
(page 13)  
Decoder displays  
Night mode  
(page ꢀ1)  
(page ꢀ3)  
Volume level display  
NIGHT  
PCM  
DIGITAL  
PL  
VOL  
m
ft  
mS  
dB  
Status display  
5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Welcome  
Thank you  
Accessories  
Table Stand I Sound Projector Order No. 67208  
Floor Stand 5 MU Order No. 67471 B10  
for choosing a Loewe product. We are happy to welcome you as our customer.  
At Loewe we combine the highest standards of technology, design and user  
friendliness. This is equally true of TV, DVD, video, audio and accessories. Neither  
technology nor design is an end in itself, but both are intended to provide our  
customers with the best possible audio and visual experience. Our design is not  
influenced by short-term, fashionable trends. You have, after all, purchased a  
high-quality piece of equipment which you do not want to get tire of tomorrow  
or the day after.  
Environmental Protection  
Power consumption  
Your unit has been equipped with an economical standby power supply. In standby,  
power consumption falls to a low level (page ꢀ7). If you want to save even more  
electricity, disconnect the unit from the mains.  
The Loewe Individual Sound Projector is the simplest way to enjoy digital surround  
sound without laboriously having to arrange and connect up numerous loudspeakers  
distributed around the room. We use state-of-the-art digital technology to control  
several small loudspeakers in such a way that directed soundwaves and targeted  
reflection off the walls of your room create the real impression of acoustic spatial  
perception regardless where you are sitting - as if you were in the thick of it. And  
setting up and operating the Sound Projector is quite simple.  
Cardboard Box and Packaging  
In line with national regulations regarding the disposal of packaging materials, we  
pay a fee to authorised recyclers who collect packaging from dealers. Nevertheless,  
we recommend that you keep the original cardboard box and the rest of the  
packaging materials so that the unit can, if necessary, be transported in the safest  
possible conditions.  
Scope of delivery  
The unit  
Loewe Individual Sound Projector  
Remote control Assist with ꢀ batteries  
Mains cable  
Important: The EU Directive ꢀ00ꢀ/96 /EC governs the proper  
re-acceptance, handling and recycling of used electronic  
appliances. Old electronic appliances must therefore be disposed  
of separately. Never dispose of this unit in the normal domestic  
waste! You can hand in your old unit free of charge at identified  
collection points or to your dealer if you buy a similar new unit.  
Digital audio cinch cable  
Audio cinch cable  
Video cinch cable and SCART adapter  
Optical audio cable  
Other details about re-acceptance (also for non-EU countries) are  
available from your local authorities.  
System cable RS-ꢀ3ꢀC  
Microphone with stand  
Wall mount, cover  
Remote control batteries  
The batteries provided contain no harmful materials such as  
cadmium, lead or mercury.  
Cable holder, adhesive holders (4x)  
this user guide and mounting instructions  
Regulations concerning used batteries mean that batteries may  
no longer be thrown out with the household rubbish. You can  
dispose of used batteries free of charge at the collection points  
in commercial outlets. Your dealer will also have a collection point  
for used batteries.  
You can control three units using the remote control, apart from this Sound Projector,  
a Loewe TV set and a Loewe recorder as well.  
Trademark rights  
Manufactured under licence from Dolby Laboratories. Dolby, ProLogic and the  
double-D symbol are trademarks of Dolby Laboratories.  
and  
are trademarks of Digital Theater Systems, Inc.  
Manufactured under licence from 1 Ltd. Trademark protection worldwide.  
The Logo and "Digital Sound Projector™" are trademarks of 1 Ltd.  
TruBass, SRS and the  
symbol are registered trademarks of SRS Labs, Inc.  
TruBass technology is manufactured under licence from SRS Labs, Inc..  
This product was made with the support of YAMAHA CORPORATION.  
- 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
For your safety  
Foryourownsafety, andtoavoidunnecessarydamagetoyourunit, pleaseread  
and follow the safety advice below.  
Supervision  
Do not allow children to use the Sound Projector/TV set unsupervised. Do not allow  
children to play in the immediate vicinity of the Sound Projector/TV set. They could  
knock, push or pull the equipment over and cause injury.  
Use for the intended purpose and ambient  
conditions  
Cleaning  
This Sound Projector is intended exclusively for the reception, recording and play-  
back of video and audio signals and is designed for the home and office and may  
not be operated in rooms with high humidity (e.g. bathroom or sauna) or a high  
concentration of dust (e.g. workshops).  
Only clean your Sound Projector with a slightly damp, soft, clean cloth (without  
any aggressive cleaning agents).  
About this user guide  
The information in this guide refers to the Loewe product Individual Sound  
The terms of the warranty only cover normal use of the Sound Projector.  
Projector.  
Unless stated otherwise, the instructions refer to the operating elements on the  
Assist remote control.  
IMPORTANT: THE MAINS CABLE OF THIS UNIT MUST BE CONNECTED TO A  
SOCKET WITH PROTECTIVE GROUND.  
Paragraphs beginning with the symbol indicate important hints, tips or conditions  
for perfect operation.  
This unit is not disconnected from the mains even when it is switched off provided  
it is still plugged into the socket. This status is called Standby. In standby the unit  
only uses a small amount of electricity (page ꢀ7).  
During a lengthy absence the plug should be disconnected from the mains .  
The mains plug must be easy to reach to ensure that the unit can be disconnected  
from the mains at any time.  
Terms which you will find in the menu or printed on the Sound Projector are printed  
in bold type.  
In the functional descriptions, the necessary operating elements are arranged to  
the left of the text which contains the handling instructions.  
If you have moved the device out of the cold into a warm environment, leave it  
switched off for about an hour to avoid the formation of condensation.  
Always switch off your system (Sound Projector, TV set and any other audio com-  
ponents which may be connected) before connecting or disconnecting other  
devices or loudspeakers.  
Loewe RS-232C system interface  
In this user guide you will initially find out how to set up and operate the combination  
of the Sound Projector with a Loewe TV set with chassis Digital+ HD100 (Lꢀ710)  
or Digital+ HD (Lꢀ700) with software from V4.x upwards. This combination offers  
advantages for the set-up and operation through the harmonised behaviour of the  
individual components with each other and through intelligent unit communication  
via the Loewe RS-ꢀ3ꢀC system interface.  
PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE  
COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT  
THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED  
OUT BY A LOEWE DEALER.  
Afterwards, the set-up or operation is described in connection with other TV sets  
which do not have this system interface.  
Avoid any metal objects, needles, paper clips, liquids, wax or similar getting into  
the unit through the ventilation slits at the rear. This can short-circuit the unit  
and possibly cause a fire.  
Shipping the Unit  
The original shipping box and packaging materials should be used in this case.  
To protect the unit as much as possible, pack it in the same way as it was packed  
when you originally received it.  
If anything should penetrate the inside of the unit, immediately unplug from the  
mains and inform customer service to check it.  
Always protect the unit from moisture, cold, shock, mechanical stress and dirt .  
Do not place anything containing a liquid or burning candles on top of the unit.  
The batteries in the remote control may not be exposed to heat, e.g. direct sunlight,  
fire etc.  
As far as possible, only use original accessories such as Loewe mounting systems.  
7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Set-up in general  
Positioning in the room  
The Sound Projector gives out surround sound by reflecting projected sound waves  
off the walls in your room. The surround sound effect generated by this unit may not  
be sufficient if the unit is installed in a room with the following characteristics.  
Rooms in which the walls are not suitable for reflecting soundwaves.  
Rooms with sound damping surfaces.  
The unit is suitable for various set-up solutions. Please pay attention to the  
respective mounting instructions.  
Only place the unit with a table or stand on a level, firm, horizontal surface.  
When being set up, the unit should, in particular, not protrude into or over  
furniture.  
Do not set up the unit near strong heat sources or in direct sunlight. Always  
protect the unit from moisture, cold, shock and mechanical stress and dirt.  
When setting up the unit, ensure that air can circulate easily and that there is  
no heat accumulation. Do not cover the openings at the rear. Keep a distance  
of at least 5 cm above, behind and below this unit.  
Keep this unit away from other electrical household equipment, motors or  
transformers to avoid crackling noises.  
Set the unit up in such a way that the infrared signal from the remote control  
can reach the Sound Projector display without being impeded.  
Do not place anything containing a liquid or burning candles on top of the  
unit.  
Do not place any strong artificial light source in front of the unit. This could  
have a detrimental effect on the infrared reception.  
Incorrect voltages can damage the unit. This unit may only be connected up  
to an electricity supply with the voltage and frequency stated on the rating  
plate. Select the mains cable suitable for use in your country and connect to  
a socket with a properly connected protective ground.  
Rooms with dimensions outside the following range: width (3 - 7 m) × height  
(ꢀ - 3.5 m) × depth (3 - 7 m).  
Rooms in which the listening position is less than 1.8 m away from the  
loudspeaker position.  
Rooms in which, for example, furniture could block the path of the sound  
beams.  
Rooms in which the listening position is close to the wall.  
Rooms in which the listening position is not in front of this unit.  
Install the Sound Projector in a position where the path of the sound beams is not  
impeded by obstacles, such as furniture. Otherwise the desired surround sound  
effects may not be obtained.  
You can install the unit parallel to the wall or in a corner.  
Position parallel to the wall  
Install the Sound Projector exactly in the middle of the wall, measured precisely  
from the left and the right corner.  
In thunderstorms, disconnect the TV antennae and mains plug. A voltage  
surge caused by lightning conducted through the antenna system or the mains  
could damage the unit.  
During a lengthy absence the plug should be disconnected from the mains.  
The mains plug must be easy to reach to ensure that the unit can be  
disconnected from the mains at any time.  
Position the mains cable in such a way that it can not be damaged. The mains  
cable may not be bent or laid across sharp edges, walked on or exposed to  
any chemicals; the latter applies to the whole unit.  
When you want to unplug from the mains, do not pull on the cable, but on the  
housing of the plug. The cables in the mains plug could otherwise be damaged  
and could cause a short-circuit when being plugged in again.  
Stop using the unit immediately if the mains cable is damaged. A mains  
cable with damaged insulation can cause electric shocks and represents a  
fire hazard.  
Position in a corner  
Install the Sound Projector in a corner at an angle of 40º to 50º to the adjoining  
walls.  
Do not use any force when operating the controls, sockets or cables.  
Please also read and follow the safety advice on page 7.  
- 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Mounting on a floor stand  
You can use the "Floor Stand 5 MU" which can be supplied as an accessory to set  
up your Sound Projector on the floor in connection with a Loewe TV set.  
Set-up solutions  
You can arrange your Sound Projector in different set-ups depending on which  
other equipment you are connecting to it and the layout of the room. You are  
urgently recommended to use the set-up solutions intended and tested by Loewe.  
Pay attention to the advice given in the respective enclosed instructions for set-up.  
Wall mounting  
You can use the wall bracket supplied to mount your Sound Projectors on the wall  
opposite your listening position.  
Please ask your Loewe dealer about other set-up solutions.  
Connecting the Sound Projector  
You can connect various sound sources to the Loewe Sound Projector.  
Loewe TV sets from Chassis Digital+ HD100 [Lꢀ710] upwards. The device  
combination Loewe Sound Projector and Loewe TV set (from Chassis Digital+  
HD100 [Lꢀ710]) is particularly easy to connect and operate (refer to page 10  
onwards).  
Mounting on a table  
You can use the "Table Stand I Sound Projector" which can be supplied as an  
accessory to set up your Sound Projector on a flat surface.  
Loewe TV sets without RS-ꢀ3ꢀC system interface (page 11).  
Additional accessories. Refer to page 1ꢀ.  
9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Connecting to Loewe TV sets with RS-232C system interface  
Loewe TV sets with Chassis Digital+ HD (Lꢀ700) are compatible with the Sound Projector with software fromV4.x onwards. Please contact your Loewe dealer if you require a  
software update.  
Loewe Individual Sound-System (Subwoofer)  
Make the connections as shown here:  
Audio Link  
Loewe Sound Projector  
RS-232C  
Loewe Flat-TV  
AUDIO  
DIGITAL  
OUT  
Digital AUDIO OUT  
- 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Connecting to Loewe TV sets without RS-232C system interface  
Make the connections as shown here:  
Loewe Individual Sound-System (Subwoofer)  
Depending on the system, you either make the  
Analogue AUDIO or the Digital AUDIO connection or both together.  
Audio Link  
Loewe Sound Projector  
Analogue AUDIO  
Loewe Flat-TV  
AV2-SCART  
CENTER  
AUDIO OUT L/R  
COMPONENT IN  
DIGITL OUT  
SERVICE  
VIDEO  
Digital AUDIO  
11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Connecting the accessories  
Make the connections as shown here (example: connection of a Loewe DVD recorder):  
Depending on the system, either make the Analogue AUDIO or the Digital AUDIO connection.  
As required, you can connect additional audio sources to the interfaces Optical AUX1/2, TV-COAXIAL, AUDIO IN TV or AUDIO IN AUX3.  
Loewe Sound Projector  
Analogue AUDIO  
Loewe Recorder  
HDMI  
S-VIDEO OUT  
HDMI  
RS-232C  
Loewe Flat-TV  
Digital AUDIO  
- 1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Connecting to the mains supply  
Switching on/off  
Set the remote control up for TV operation.  
Press the on/off button on the remote control to switch on the  
Loewe TV set.  
If the Loewe Sound Projector is operated in connection with  
a Loewe TV set with Chassis Digital+ HD100 (Lꢀ710) or Digital+  
HD (Lꢀ700) with software from V4.x onwards, the Sound  
Projector will switch on or off automatically with the TV set.  
When connected to a TV set without RS-ꢀ3ꢀC system interface:  
Set the remote control up for Sound Projector operation.  
Select the mains cable suitable for use in your country. First of all, plug the mains  
cable plug into the power supply socket on the back of the unit and then plug the  
mains plug into a mains socket ꢀꢀ0-ꢀ40V~ 50 Hz.  
Press the on/off button on the remote control.  
When switched off, only the on/off button on the front of the Sound Projec-  
tor or on the remote control is active.  
Using the remote control for the first time  
Acoustic room set-up  
For the sound field of the Sound Projector to be aligned directly to your listening  
position, adjust the unit to your actual room. This is done using the microphone  
supplied and an automatic sequence controlled by the Sound Projector. The fol-  
lowing steps are required:  
A. Measuring the actual room.  
B. Optimising the sound beams.  
To insert or change the batteries, press on the arrow. While doing so, simply  
slide the battery compartment lid down and remove it. Insert alkali manganese  
batteries LR 03 (AAA) and ensure the correct position of + and –. Slide the cover  
on again from the bottom.  
C. Optimising the sound (delay, volume, frequency, if applicable subwoofer).  
You can save up to three sound set-ups. This allows you, for example, to take  
different listening positions, the actual room or TV positions into consideration  
when using a Loewe TV with swivel caster control. These sound set-ups can then  
be requested again as required (page 15, 18).  
Adjusting the remote control for the system being used  
Depending on which system configuration you are operating, it is necessary to  
adjust the remote control to the appropriate mode.  
Loewe TV set with RS-ꢀ3ꢀC  
Loewe TV set without RS-ꢀ3ꢀC  
Factory settings  
+
+
The button combination given must be kept pressed until the corresponding LED  
flashes twice (approx. 5 seconds).  
13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Assemble the stand supplied:  
Connecting and setting up the microphone  
Using the microphone supplied, the Sound Projector evaluates the test signals it  
generates and can thus adjust the sound output to your actual room.  
1. Separate the individual parts from each other (1).  
ꢀ. Push the two long parts together (2).  
3. Put the round part on top (3).  
Protect the microphone from heat and from direct sunlight.  
4. Place the microphone on the round part (4).  
Do not use an extension lead for the microphone.  
1
2
Position the microphone where you are planning to have your listening  
position (ear height).  
Avoid obstacles between the microphone and the walls.  
With a subwoofer connected where required, set the volume to medium and  
set the transmission/high-pass frequency to maximum.  
Press the on/off button on the unit or  
the on/off button on the remote control to switch the unit off.  
Connect the microphone supplied to the socket MIC-IN on the  
underside of this unit.  
3
4
Position the microphone at least 1.8 m away from the Sound  
Projector centred on it on a level surface. Use the stand supplied  
to set up the microphone at the height of your required listening  
position, pointing upwards.  
Distance microphone  
- Sound Projector  
> 1.8 m  
Centre line  
Microphone in listening position  
- 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
OK Call up menu Set/change listening position.  
Auto set-up (TV sets with RS-232C System  
Interface)  
Sound components wizard  
Select one of the three memory positions for the new sound adjustment which  
will be set subsequently.  
Ensure that the devices are set up correctly (page 8/9),  
all cables are connected properly (page 10,13) and that the  
microphone is connected and positioned correctly (page 14).  
Set the remote control up for TV operation.  
Press the on/off button on the remote control to switch on the  
Loewe TV set and the Sound Projector.  
Sound projector  
Select memory position  
OK  
Position 1 (MEM1)  
Position 2 (MEM2)  
Position 3 (MEM3)  
END  
OK  
Proceed  
Call up the TV menu.  
34Select Connections.  
34Select one of the memory positions Position 1-3  
(MEM1-3) .  
6Change to the menu line below.  
34Select Sound components.  
OK Select Sound components wizard.  
The selection Sound playback via ... appears.  
Confirm OK.  
Sound components wizard  
Turn your TV set by using the cursor keys left/right to the desired  
listening which is optimal for your listening position and confirm with the  
OK  
key.  
Sound components wizard  
When using a Sound projector please connect the TV socket AUDIO DIGITAL  
OUT to the Sound projector input TV COAXIAL. For controlling the Sound  
projector via the TV set please connect the RS232C(TV) socket to the  
RS232C(Sound projector) socket additionally.  
If you have a TV set without built-in speakers, you have to select "Sound  
projector" only.  
Sound projector  
Rotate TV  
-30  
END  
Sound components  
Sound playback via ...  
TV speakers  
OK  
Proceed  
Speaker system  
HiFi/AV amplifier  
Sound projector  
OK  
If the Loewe TV set is equipped with swivel caster control, now  
use 34to turn the TV to the required listening position.  
END  
HiFi/AV amplifier or TV speaker (switchable)  
Sound projector or TV speakers (switchable)  
Proceed  
OK  
Sound components wizard  
Start the acoustic auto setup for the Sound projector now (please also read  
56Select Sound Projector or Sound Projector or TV  
speakers (switchable) (page ꢀ4).  
the manual for this). Place the microphone to the desired position. Please  
OK  
leave the room after pressing the  
key to avoid any disturbances. The  
auto setup will start after 10 seconds automatically. About 3 minutes later  
a final chime is played. After this follow the instructions of the wizard.  
Confirm OK.  
Sound components wizard  
The wizard supports to optimise the Sound projector settings for your  
listening positions. Up to 3 positions can be stored. You will be prompted  
to turn the TV set to the desired position and after that to start the Auto  
setup of the Sound projector.  
END  
Sound projector  
OK  
Start auto setup  
Proceed  
OK  
OK Start auto setup.  
Sound projector  
Configuration/modification of Sound projector  
Set/change listening position  
OK  
Activate listening position  
END  
OK  
Proceed  
15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
Example ꢀ - failed auto set-up:  
Sound components wizard  
The auto setup is running. Please wait ...  
Sound components wizard  
Hint: The auto setup failed with Error E-1 (Too much noise).  
During the measurement nobody should be present in the room.  
After about 3 minutes a final chime is played. The procudure can be  
OK  
Too much noise. Please restart the auto setup with the  
key.  
END  
cancelled by the  
key.  
END  
END  
Sound projector  
OK  
Start auto setup  
Proceed  
OK  
Duringauto set-up, the listening room should be free of noise interference.  
Please leave the room during this time so that the sound beams can spread  
without disturbance.  
If the message "Note: The auto set-up failed due to problem E-1 (room is too  
noisy)" is displayed , repeat the auto set-up process . Please also read the "Error  
messages for auto set-up" on page ꢀ6.  
Ifan error occurs during auto set-up, a warning will sound and a message  
will appear on the TV screen (page ꢀ6). If necessary, check the above described  
conditions for the Sound Projector to work perfectly.  
OK Apply results of auto set-up.  
Remove the microphone from the Sound Projector now.  
The Sound Projector is now ready.  
Autoset-uptakes about 3 minutes and a final chime sounds when it  
finishes.  
You will find information on operating the Sound Projector  
from page 19 onwards.  
You can save three listening positions and call them up again, for example,  
to be able to take changing conditions in the listening room into consideration.  
Position the microphone at least 1.8 m away from the Sound Projector centred  
on it on a level surface.  
After auto set-up has been completed, a message will appear  
on the screen.  
Example 1 - successful auto set-up:  
Sound components wizard  
OK  
With the  
key the position and the corresponding adjustments of the auto  
setup are stored to "Position 1 (MEM1)".  
Sound components  
Sound projector  
Store settings  
END  
OK  
OK  
Proceed  
- 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial set-up  
Starting auto set-up  
Press the button for a long time.  
Auto set-up (TV sets without RS-232C  
System Interface)  
The menu AUTO SETUP appears.  
Make sure that the devices are set up correctly (page 8/9), all connections  
have been made properly (page 11,13) and that the microphone is connected  
and set up correctly (page 14).  
AUTO SETUP  
PREPARATION & CHECK  
Settings on TV set  
On your TV set, (with Loewe TV sets in the "Connection wizard"), set the audio  
output to HiFi/AV amplifier.  
Please connect the MIC.  
Please place the MIC at least  
1.8m/6ft away from the SP  
unit. The MIC should be set  
at ear level when seated.  
Measurement takes about 3min.  
After [OK] is pressed,  
Setting user interface language  
Set the remote control up for TV operation.  
please leave the room.  
[OK] : Start  
[END] : Cancel  
Press the on/off button on the remote control to switch on the  
Loewe TV set.  
OK Start auto set-up.  
Call up AV selection.  
AUTO SETUP  
34Select the AV programme position that the Sound  
Projector is connected to.  
Will begin in 10sec  
Confirm OK.  
Set the remote control up for Sound Projector operation.  
Press the on/off button on the remote control to switch on the  
Sound Projector.  
──────  
[END] : Cancel  
Press the button for a long time.  
The menu LANGUAGE SETUP appears.  
During auto set-up the listening room should be free of noise interference.  
Please leave the room during this time so that the sound beams can spread  
without disturbance.  
LANGUAGE SETUP  
ENGLISH  
DEUTSCH  
Francais  
ESPANOL  
ITALIANO  
NEDERLANDS  
If an error occurs during auto set-up, a warning will sound and a message  
will appear on the TV screen (page ꢀ6). If necessary, check the above described  
conditions for the Sound Projector to work perfectly.  
Autoset-up takes about 3 minutes and a final chime sounds when it  
finishes.  
[] / [] : Up / Down  
[OK] : Enter  
You can save three listening positions and call them up again, for example,  
to be able to take changing conditions in the listening room into consideration.  
56Select required language.  
Position the microphone at least 1.8 m away from the Sound Projector cen-  
tred on it on a level surface.  
Confirm OK.  
The language selected is also shown on the display of the  
Sound Projector (display always in English).  
17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial set-up  
After auto set-up has been completed, a message will appear  
Saving sound set-up  
on the screen.  
You can save up to three sound set-ups. This allows you, for example, to take  
different listening positions, the actual room or TV positions into consideration  
when using a Loewe TV with swivel caster control. You can than call up these  
sound set-ups at any time.  
Example 1 - successful auto set-up:  
AUTO SETUP  
Press the button for a long time. The menu MEMORY  
appears.  
MEASUREMENT COMPLETE  
BEAM MODE : 5 BEAM  
SUBWOOFER : NOT APPLICABLE  
MEMORY  
1) LOAD  
2) SAVE  
[OK] : Save set-up.  
[END] : Do not save set-up.  
Example ꢀ - failed auto set-up:  
[] / [] : Up / Down  
[OK] : Enter  
AUTO SETUP  
56Select the option SAVE.  
MEASUREMENT COMPLETE  
Confirm OK.  
ENVIRONMENT CHECK [FAILED]  
BEAM MODE : 5 BEAM  
SUBWOOFER : NOT APPLICABLE  
2) MEMORY SAVE  
MEMORY1  
MEMORY2  
MEMORY3  
[OK] : Save set-up.  
[END] : Do not save set-up.  
If the message Error E-1 is displayed, repeat the autoset-up process. Please also  
read the "Error messages for auto set-up" on page ꢀ6.  
[] / [] : Select  
[OK] : Enter  
OK Apply results of auto set-up .  
Remove the microphone from the Sound Projector now.  
56Select the option MEMORY1-3.  
The Sound Projector is now ready.  
Confirm OK.  
You will find information on operating the Sound Projector  
from page 19 onwards.  
All settings you adjusted in the Sound Projector menus are permanently  
stored by saving.  
- 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Everyday use  
Playback  
Loading listening position  
You can call upthe listening position that you saved previously (page 15, 18).  
TV sets with RS-232C system interface  
No further menu is shown.  
Selecting signal  
You can play backsound from connected devices.  
Press AUX (PIP) on the remote control several times  
or on the unit press SOURCE several times to select the  
34Select.  
required signal source.  
Listening position  
Position 1 (MEM1)  
...  
Position 2 (MEM2)  
Position 3 (MEM3)  
The name of the selected input signal source and the type of corresponding input  
mode are shown on the Sound Projector display.  
34Select one of the memory positions Position 1-3  
Switch sound on/off  
Sound off;  
(MEM1-3) .  
Confirm OK.  
Sound on: Press button again or adjust volume V+.  
TV sets with an RS-232C system interface and swivel  
caster control  
Adjusting volume  
No further menu is shown.  
34Select.  
V+/V– volume up / down  
Rotate TV (MEM2)  
-20  
34Select one of the memory positions Position 1-3  
(MEM1-3). These are marked on the bar.  
or on the unit press Vol -/Vol + .  
The volume bar is shown briefly if no other menu is displayed.  
Confirm OK.  
Other sound settings for TV sets with RS-232C System  
Interface  
As long as the volume bar or the selection of loudspeakers can still be seen  
in listening mode.  
5Call up additional sound settings.  
34Select sound settings.  
6Change to the menu line below.  
34Make changes.  
You can also make additional sound settings on Loewe TV sets under the  
TV menu Sound.  
19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Everyday use  
TV sets without RS-232C system interface  
Select sound mode  
You can choose between different surround sound modes.  
Press the button for a long time. The menu MEMORY  
appears.  
Select sound mode by pressing several times.  
MEMORY  
5 Beam The sound beams from all 5 channels are emitted.  
The surround sound effects come into their own when they  
play back media recorded in multichannel format.  
1) LOAD  
2) SAVE  
Stereo+3 Beam The sound is emitted directly in stereo via the left and right  
front channel as well as via the centre channel. The left and  
right surround channel are emitted via sound beams.  
This mode is suitable for playing back live recordings for  
example. Singing and instrumental sounds can be appreciated  
best near the middle position, whilst the sound reflections  
generated on site can be heard on your left and right.  
3 Beam The left front and surround channel, as well as the right front  
and surround channel, are emitted via sound beams.  
The centre channel is emitted directly. This mode is most  
suitable for watching films with the whole family due to the  
extended listening position range. You can also use this mode  
if the listening position is near the back wall meaning that the  
left and right surround beam can not be reflected.  
[] / [] : Up / Down  
[OK] : Enter  
56Select the option LOAD.  
Confirm OK.  
1) MEMORY LOAD  
MEMORY1  
MEMORY2  
MEMORY3  
Stereo The sound is emitted in stereo via the left and right front  
channel.  
[] / [] : Select  
[OK] : Enter  
56Select the option MEMORY1-3.  
Confirm OK ꢀx.  
All settings you made previously that you did not save are lost when you  
load the content of the memory.  
- ꢀ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Everyday use  
Surround modes and recommended signal sources  
Selecting input mode  
You can select the audio input signal type of the set input signal source.  
Surround mode Recommended signal source  
Neo:6 films, music  
In most cases, setting the input mode to AUTO is  
recommended.  
All signal sources  
PL  
PL Films, music, games  
Select the input mode by pressing IN-MODE several times.  
The surround modes are available if another sound beam mode is selected  
as the stereo playback.  
Signal source shown in the display  
TV / AUX3 TV Auto - TV DTS - TV Analogue  
AUX1 DVD Auto - DVD DTS  
If you select an input signal source (page 19), the surround mode that was  
used for the previous input signal source selected is retained.  
AUX2 AUX Auto - AUX DTS  
If you switch this unit off and on again, the surround mode used for the  
previous input signal source selected before switching off is retained.  
Selecting signal source  
Surround modes are only available if the sound field programmes have been  
deactivated (page ꢀꢀ).  
Press AUX (PIP) several times on the remote control to select  
the required signal source.  
If you press the button  
on the remote control and no surround modes are  
available, Prohibit will appear on the display of the Sound Projector.  
Decoder displays  
The surround modes are only available if ꢀ-channel signals have been set up.  
If you try to switch between surround modes when 5.1 channel signals are set up,  
Prohibit will appear on the display of the Sound Projector.  
Depending on the input signal source and the surround mode selected, the indi-  
cators on the display of the Sound Projector light up as follows.  
PCM When playing back PCM signals.  
When playing back PCM or Neo:6 signals.  
DIGITAL  
When playing back Dolby Digital signals.  
When playing back Dolby Pro Logic signals.  
PL  
PL When playing back Dolby Pro Logic II signals.  
ꢀ1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Everyday use  
Playback of 2-channel signal sources with  
surround sound  
This unit can process ꢀ-channel signal sources for 5.1 channel playback in such  
a way that by switching the surround mode, you can enjoy a number of surround  
sound effects.  
Sound field programmes  
This unit is equipped with a digital sound field processor which contains several  
sound field programmes which you can use to enhance your listening pleasure.  
Most of the sound field programmes are precise digital reproductions of acoustic  
environments which actually exist whether famous concert halls, music performance  
venues or cinemas.  
An important factor which contributes towards producing the rich, full sound of  
a real instrument is the numerous reflections from the walls of the room. These  
reflections not only bring the sound to life, but also allow the listener to locate  
the precise position of the instruments and to define the size and shape of the  
room the listener is sitting in.  
Surround modes are only available if the sound field programmes have been  
deactivated (this page). Moreover, the sound mode has to be set to 5-Beam  
mode, stereo-plus-3-Beam mode or to 3-Beam mode (page ꢀ0).  
Press several times to select surround mode.  
PRO LOGIC, PLII Movie, PLII Music, PLII Game,  
Neo:6 Cinema, NEO:6 Music  
Using the colour keys you can select the following sound field programmes  
based on your own listening preferences while playing back music, films or sport  
programmes.  
If Prohibit is shown, then the function you want is not possible.  
Setting surround mode parameters  
To be able to balance the surround effect precisely, you can configure the parameters  
for Dolby Pro Logic II Music and DTS Neo:6 accordingly.  
Sound field  
programme  
Source Description  
This programme gives you the feeling of being  
Music Video  
Select PLII Music or NEO:6 Music.  
56Select option.  
in an actual jazz or rock concert.  
Concert Hall  
This programme generates an atmospheric  
effect of a large, round concert hall and makes  
you feel as if you are sitting close to the middle  
of the stage.  
34Set / select parameters.  
Music  
Options with Dolby Pro Logic II  
PANORAMA Gives the left and right front channel a panorama effect which  
covers the whole surround sound field to give a feeling of  
expanse.  
Selection options: ON/OFF.  
DIMENSION To set the required volume balance between the front and  
back surround channels.  
Control range: –3 (in surround direction) up to +3 (in front  
direction).  
CT WIDTH This function distributes the signal of the centre channel to  
the left and right. If this value is set to "0", the middle channel  
only emits the sound signal for the centre channel. Positive  
values impart a wide area of the centre loudspeaker.  
Jazz Club  
Sci-Fi  
This programme recreates the acoustic envi-  
ronment of "The Bottom Line", a famous jazz  
club in New York.  
This programme reproduces dialogue and  
sound effects in modern science fiction films  
with great clarity.  
Spectacle  
Adventure  
This programme reproduces an expansive,  
spacious environment and conveys the  
impression of spectacular scenes.  
Film  
This programme reproduces the enthralling  
environment of the newest action films and  
allows you to feel the dynamics and excite-  
ment of fast scenes.  
Option with DTS Neo:6  
C. IMAGE Adjusts the centre sound from three channels (front and in the  
middle) in various stages. Positive values impart a wide area of  
the centre loudspeaker.  
Sports  
This programme reproduces the energetic en-  
vironment of live sports programmes, merges  
the commentator's voice in the centre with the  
overall atmosphere of the stadium and gives  
you the feeling of being in the middle of the  
stadium or of sitting in the grandstand.  
Sport  
- ꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Everyday use  
Activating sound field programmes  
Bass mode  
If a subwoofer is available, the Sound Projector is capable of producing the  
impression of an improved bass performance. The bass performance can also be  
improved without a subwoofer.  
Select the sound field programme Music. By pressing several  
times, select the programmes Music Video, Concert Hall and  
Jazz Club.  
Press the button BASS several times to select the required  
bass mode.  
Select the sound field programme Film. By pressing several  
times, select the programmes Sci-Fi, Spectacle and Adven-  
ture.  
Select TruBass MID for normal effects.  
Select TruBass MID for maximum effects.  
Select TruBass OFF to switch the function off.  
Select the sound field programme Sport.  
Audio Balance  
Switch off the sound field programme.  
You can set the initial sound beam output level of each channel with the aid of the  
test sound or the audio output played back in the respective sound beam mode  
to attain a more authentic surround sound experience.  
Intensity of sound field programmes  
56Press briefly. DSP LEVEL appears on the display.  
Using the test sound  
You can use the test sound function to emit the test sound from every channel to  
manually balance the channel levels.  
34Set level within 4 seconds.  
Night mode  
Press the button briefly. A test sound is emitted.  
56Select channel. The selected channel is shown in the  
display.  
The night sound modes are set up to improve the listening experience at night  
when noise levels are low. Moreover, you can limit the volume level so that when  
the programme content changes (e.g. through advertising breaks etc.) the volume  
does not suddenly drastically change.  
34Set level.  
TEST FRONT L left front channel  
TEST CENTER Centre channel  
Press several times to select the required night mode.  
TEST FRONT R right front channel  
TEST SUR. R right surround channel  
TEST SUR. L left surround channel  
TEST SWFR Subwoofer (only if connected)  
Select NIGHT : CINEMA, when you are watching a film,  
to reduce the dynamic range of the film soundtrack so that  
you can hear the dialogue better when the volume is turned  
down.  
Switch test sound off.  
Select NIGHT : MUSIC, when you are listening to music  
sources to enjoy a natural sound.  
Select TV EQUAL VOL, if you are watching TV programmes.  
Select OFF to leave the volume mode.  
34Set effect level of compression within 4 seconds of  
selecting night mode.  
Select Effect.Lvl : MIN for minimal compression.  
Select Effect.Lvl : MID for normal compression.  
Select Effect.Lvl : MAX for maximum compression.  
ꢀ3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Everyday use  
Sound menu functions for Loewe TV sets  
with RS-232C System Interface  
Sound menu functions for Loewe TV sets  
without RS-232C System Interface  
If the Sound Projector is being operated in connection with a Loewe TV set with  
an RS-ꢀ3ꢀC system interface (page 10), some special menus will appear on the  
TV set.  
You can make basic changes in the Sound menu on the Sound Projector.  
Press the button briefly. The SOUND MENU appears.  
Call up the TV menu.  
1) SOUND MENU  
34 Select Sound.  
A) TONE CONTROL  
B) SUBWOOFER SET  
C) MUTE LEVEL  
D) AUDIO DELAY  
E) ROOM EQ  
Change to the menu line below.  
34 Select required option.  
F) DD/DTS DYNAMIC RANGE  
Sound mode  
Refer to page ꢀ0.  
[] / [] : Up / Down  
[OK] : Enter  
Subwoofer  
Here you can set individual parameters for a Loewe Individual Sound-System  
(Subwoofer) connected to the Sound Projector via Loewe Audio Link (page 10).  
56Select required option.  
Connected select yes / no  
Cross over frequency 80 / 100 / 1ꢀ0 Hz  
LFE level -ꢀ0 dB ... 0 dB  
TONE CONTROL You can set the proportion of Highs and Lows.  
SUBWOOFER SET You can set parameters for the subwoofer, such  
as Bass output, Transfer frequency, Level and  
Distance from listening position.  
Distance to listening position  
MUTE LEVEL You can set the level to which the sound drops with  
Sound off (page 19).  
AUDIO DELAY You can set the delay time between sound and  
Room parameter  
Here you can set the parameters for setting up the system in your environment.  
picture to obtain synchronised playback.  
Mounting Shelf / Wall  
ROOM EQ Here you can set the parameters for setting up the  
system in your environment. Under SET-UP you can  
select: SHELF / WALL;  
Reflections Normal / Echo  
Dolby Digital/DTS dynamic range  
Here you can set parameters for the required dynamics range of the Sound  
Projector.  
for REFLECTIONS: NORMAL / ECHO  
DD/DTS- Here you can set parameters for the required  
DYNAMIC RANGE Setting the dynamic range of the Sound Projector.  
You can select: Min / Standard / Max.  
Select DD/DTS dynamics range Min / Standard / Max  
Sound from Sound Projector  
Confirm OK.  
Here you can set the sound playback with analogue signals.  
Select sound from Sound Projector Stereo / Mono  
ꢀ sound transmission Select sound 1 / sound ꢀ  
Close menu.  
Sound via  
Here you can select whether you want to play back the sound through the  
loudspeaker built in to the TV set or using the Sound Projector. To do so, in the  
menu Sound components - Sound playback via ... choose the setting Sound  
Projector or TV set (switchable) (page 15).  
Sound via TV / Sound projector  
- ꢀ4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Problem  
Possible cause  
Remedy  
Not working at all.  
Mains cable not plugged in.  
Plug the mains cable firmly into the socket on the Sound  
Projector and then into a ꢀꢀ0-ꢀ40 V 50 Hz socket with protec-  
tive ground.  
The unit suddenly switches to standby.  
No sound.  
The internal temperature is too high which has activa- Wait for approx. 1 hour until the unit has cooled down and then  
ted the protective circuit to avoid overheating.  
switch it on again.  
Faulty connections of input or output cables.  
Connectthecablesproperly(page10-1ꢀ). Iftheproblempersists, itis  
possiblethatthecablesarefaulty.  
No suitable input signal source has been selected.  
The volume is set at minimum.  
Select a suitable input source using AUX (PIP) or SOURCE.  
Turn up the volume.  
The sound is set to mute.  
Press  
or V + on the remote control to activate audio output  
again and then adjust the volume.  
Signals are being transmitted from a source component Play back a signal source which emits signals that this unit can  
(such as PCM signals with a sampling frequency of over process or change the system settings on the source component  
96 kHz) that this unit is not capable of playing back.  
(page ꢀ3).  
No sound from the effect channels.  
You are trying to play back the signal source or the  
programme in stereo.  
Press one of the sound field programmebuttons on the remote  
control to select a multichannel playback mode and try again to  
play back the signal source or the programme.  
No sound from the centre or the surround  
channels.  
The source level of the affected channel is set to  
minimum.  
Increase the level of the channel (page ꢀ3).  
The surround sound effects can hardly be heard.  
The listening room has an irregular shape.  
Install this unit in a square or rectangular room (page 8/9).  
There is no reflection wall for the sound beam.  
Try setting up a flat object, such as a screen, as a replacement  
wall.  
There is noise interference if no subwoofer is  
connected to this unit.  
The protective circuit was active because a source with Reduce the volume or connect a subwoofer and set the settings  
strong bass elements was being played. for a subwoofer via the sound menu (page ꢀ4).  
The on-screen dialogue (OSD) does not appear.  
The socket VIDEO OUT (Composite) on this unit is not Connect the socket VIDEO OUT (Composite) on this unit to the  
connected to the input sockets on your TV set.  
input sockets on your TV set.  
This unit is not working properly.  
Unplug the mains plug from the mains socket and then try  
plugging it in again after 30 seconds.  
The effect sounds are not satisfactory.  
Auto set-up is unsuccessful.  
The original signal source contains surround effects.  
The noise level in the listening room is too high.  
The batteries in the remote control are dead.  
Deactivate the surround effect settings on this unit.  
Ensure that it is as quiet as possible in the listening room.  
Replace the batteries with new ones.  
The remote control is not working properly.  
ꢀ5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Error messages for auto set-up  
Error Message  
Possible cause  
Remedy  
ERROR E-1  
Your listening room has too much unwanted noise.  
Ensure that it is as quiet as possible in your listening room. We recommend  
choosing a time of day when there is less noise outside.  
ERROR E-ꢀ  
ERROR E-3  
The optimisation microphone was disconnected during auto set-up .  
During auto set-up other operating processes were run on this unit.  
The optimisation microphone is not in front of this unit.  
Ensure that the optimisation microphone is firmly connected to the unit  
(page 14).  
During auto set-up do not carry out any other  
operating processes.  
ERROR E-4  
ERROR E-5  
Ensure that the optimisation microphone is positioned in front of this unit.  
The optimisation microphone is not positioned at the right distance from Ensure that the optimisation microphone is more than 1.8 m from the front  
this unit. of the unit and is within 1 m of the average height of the unit.  
ERROR E-6  
The optimisation microphone can not receive the noise produced by this Ensure that the optimisation microphone is firmly connected to this  
unit because the noise output level is too low.  
unit and has been set up properly. If the problem persists, contact your  
Loewe dealer.  
ERROR E-7  
ERROR E-8  
An internal system error has occurred.  
Repeat auto set-up.  
Repeat auto set-up.  
The measurement did not end at the expected time  
and was cancelled.  
ERROR E-9  
Cancelled by user  
Repeat auto set-up.  
Special functions  
The Sound Projector has got additional setting options which are only intended for specialist staff.  
Press button for a long time. The menu SETTINGS appears.  
Unless you have sufficient expertise, do not make any changes to the settings in this area, as this may maladjust the unit to the extent that it no longer works  
properly afterwards.  
Press the button for a long time to close the menu.  
- ꢀ6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical Specifications  
General  
Masthead  
Loewe Sound Projector  
Power supply  
Power consumption during  
Item.No. 67ꢀ01 A/D00  
AC ꢀꢀ0 - ꢀ40V, 50 Hz  
operation: 1ꢀ0 W  
Standby: < 0.1 W  
1015 x ꢀ00 x 118 mm (W x H x D)  
11.8 kg  
Loewe Opta GmbH is a public limited company of German law with its Head  
Office in Kronach.  
Industriestrasse 11, 96317 Kronach  
Telephone:+ 49 (0)9ꢀ61 / 99-0  
Dimensions (approx.)  
Weight (approx.)  
Operating temperature  
Humidity  
Fax:  
E-mail:  
+ 49 (0)9ꢀ61 / 99-500  
5 °C ... 35 °C  
5 % ... 90 %  
Trade Register: Municipal Court Coburg, No. HRB 4ꢀꢀ43  
VAT ID-No.: DE 193ꢀ16550  
Amplifier  
WEEE registration number: DE 41359413  
Maximum output power (EIAJ)  
40 x ꢀ W (1 Hz, 10% harmonic distortion,  
4 ohms)  
Issue 09.07. 1st edition  
© Loewe Opta GmbH, Kronach  
All rights reserved including translation.  
Design and technical specifications are subject to change without notice.  
ꢀ x 40 W (100 Hz, 10% harmonic distortion,  
3 ohms)  
Decoder  
Surround formats  
Sound modes  
Sound field programmes  
Dolby Digital, Dolby ProLogic II, dts, dts Neo 6  
5-Beam, 3-Beam, Stereo + 3 Beam, Stereo  
7 programmes and OFF can be selected  
Loudspeakers  
Small loudspeakers  
Woofers  
40 x 4 cm cone speakers  
ꢀ x 11 cm cone speakers  
Inputs  
AUDIO IN TV  
AUDIO IN AUX3  
DIGITAL IN TV-COAXIAL  
DIGITAL IN OPTICAL AUX1/ꢀ  
VIDEO IN AUX1/ꢀ/3  
COMPONENT VIDEO IN AUXꢀ/3  
analogue, 1 V, 3ꢀ kOhms, RCA socket x ꢀ  
analogue, 1 V, 3ꢀ kOhms, RCA socket x ꢀ  
digital, 0.5 V (p-p), 75 ohms, RCA socket x 1  
Optical connection x 1 (TOS link)  
75 ohms, RCA socket x 1  
Y/Pb/Pr, 75 ohms, RCA socket x 3  
Outputs  
VIDEO OUT  
VIDEO OUT COMPONENT  
1.0 Vp-p, 75 ohms, RCA socket x 1  
(Y) 1.0 V (p-p), 75 ohms  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA sockets x 3  
1.5 V, < 1ꢀ0 Hz, RCA socket x 1  
SUBWOOFER  
System  
Microphone input  
RS-ꢀ3ꢀC  
jack socket 3.5 mm x 1  
9 pin D-SUB  
AUDIO-LINK  
ꢀ6 pin D-SUB  
ꢀ7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operation of additional devices  
Setting the remote control  
Operating Loewe equipment  
Various Loewe devices can be set to be used with the remote control Assist as  
follows:  
Using the remote control for a Loewe Sound Projector  
Press SP button until the display above  
it lights up approx. 5 seconds  
Device  
button combination  
Loewe TV set with RS-ꢀ3ꢀC  
Loewe TV set without RS-ꢀ3ꢀC  
Loewe ViewVision 8106 H  
Loewe Centros 11xꢀ  
+
Using the remote control for a Loewe recorder  
+
+
+
+
+
+
Press REC button until the display above  
it lights up approx. 5 seconds  
Loewe Viewvision, Centros ꢀ1xꢀ HD  
Loewe ViewVision DR+ (DVB-T)  
Loewe Auro ꢀꢀ16 PS  
Using the remote control for a Loewe TV set  
Press TV button until the display above  
it lights up approx. 5 seconds  
Factory settings  
The button combination given must be kept pressed until the corresponding LED  
flashes twice (approx. 5 seconds).  
Every time a button is pressed, the display of the selected operation mode lights up  
(TV – REC – SP – RADIO).  
- ꢀ8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote control Assist – TV operation  
Switch on/off on standby  
Sound on / off  
LED indicator for current operating mode  
Switch over to operate TV Radio Digital  
Switch over to operate Sound Projector  
Sound mode  
Switch over to operate TV  
Switch over to operate DVD recorder/Auro  
Timer list  
Picture format  
Select station directly;  
MENU: numbers or letters  
AV selection  
PIP (picture in picture)  
Menu "ASSIST+"  
EPG programme guide  
Index; MENU: Info texts  
Status display; MENU: Hide menu  
Teletext  
Show/hide menu  
Select station up/down  
Volume  
PIP: Position of the PIP picture;  
MENU: select/set  
Station list  
56Move picture vertically;  
34Rotate TV  
MENU: confirm/call  
Previous station  
Programme info  
Teletext subtitles  
Freeze picture on/off; DR+: DR+ archive  
Freeze picture off; DR+: Playback/Set bookmark  
Select station up; DR+: Jump forward/fast forward  
Select station down; DR+: Jump back; Rewind  
DR+: Record  
Freeze picture on; DR+: Stop  
Freeze picture on/off;  
DR+: Pause (Start viewing with time shift)  
ꢀ9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Service  
Loewe Austria GmbH  
Parkring 10  
1010 Wien, Österreich  
Tel.: +43 - 810/0810-ꢀ4 (zum Ortstarif)  
Kjaerulff 1 A/S  
Loewe Italiana SRL  
Largo del Perlar, 1ꢀ  
37135 Verona (VR), Italia  
Tel. +39 - 045 8ꢀ 51 619  
Fax +39 - 045 8ꢀ 51 6ꢀꢀ  
DSV TRADING SA  
Plac Kaszubski 8  
81-350 Gdynia, Polska  
Tel. +48 - 58 - 6 61 ꢀ8 00  
Fax +48 - 58 - 6 61 44 70  
C.F. Tietgens Boulevard 19  
5ꢀꢀ0 Odense SØ, Denmark  
Tel. +45 - 66 13 54 80  
Fax +45 - 66 13 54 10  
International Dynamics  
Australasia Pty Ltd.  
1ꢀ9 Palmer Street  
Richmond 31ꢀ1, Victoria, Australia  
Tel. +61 - 3 - 94 ꢀ9 08 ꢀꢀ  
Fax +61 - 3 - 94 ꢀ9 08 33  
Gaplasa S.A.  
PL Trading (pz ꢀ004) Ltd.  
ꢀ7, Aliat Hanoar St.  
Givataiim 53401, Israel  
Tel. +97ꢀ - 3 - 57 ꢀ7 155  
Fax +97ꢀ - 3 - 57 ꢀ7 150  
Service Center Loewe  
Conde de Torroja, ꢀ5  
ꢀ80ꢀꢀ Madrid, España  
Tel. +34 - 917 48 ꢀ9 60  
Fax +34 - 913 ꢀ9 16 75  
ul. Verkhnaya Maslovka, d. ꢀ9  
1ꢀ5083 Moscow, Россия  
Tel. +7 - 495 61ꢀ 50 43  
Fax +7 - 495 61ꢀ 47 10  
Kjaerulff 1 AB  
Loewe Opta Benelux NV/SA  
Uilenbaan 84  
ꢀ160 Antwerpen, België  
Tel. +3ꢀ - 3 - ꢀ 70 99 30  
Fax +3ꢀ - 3 - ꢀ 71 01 08  
Loewe Opta France S.A.  
13 rue du Dépôt,  
Parc del l‘Europe, BP 10010  
67014 Strasbourg Cédex, France  
Tel. +33 - 3- 88 79 7ꢀ 50  
Fax +33 - 3- 88 79 7ꢀ 59  
Mirage Holdings Ltd  
Flamingo Complex, Cannon Road  
Qormi, Malta  
Tel. +356 - ꢀꢀ - 79 40 00  
Fax +356 - ꢀ1 - 44 59 83  
Ridbanegatan 4, Box 9076  
ꢀ1377 Malmö, Sverige  
Tel. +46 - 4 06 79 74 00  
Fax +46 - 4 06 79 74 01  
BaSys Czech & Slovak s.r.o.  
Stará Vajnorská 17/A  
831 04 Bratislava, Slovakia  
Tel.: + 4ꢀ1 ꢀ 49 10 66 18  
Fax: + 4ꢀ1 ꢀ 49 10 66 33  
Telion AG  
Rütistrasse ꢀ6  
895ꢀ Schlieren, Schweiz  
Tel. +41 - 44 73ꢀ 15 11  
Fax +41 - 44 73ꢀ 15 0ꢀ  
SOMARA S.A.  
Kjaerulff 1 OY  
Uudenmaantie 100  
ꢀ0760 Piispanristi, Finland  
Tel. +358 - ꢀ0 751 3800  
Fax +358 - ꢀ0 751 3801  
377, Rue Mustapha El Maani  
ꢀ0000 Casablanca, Morocco  
Tel. +ꢀ1ꢀ - ꢀꢀ ꢀꢀ 03 08  
Fax +ꢀ1ꢀ - ꢀꢀ ꢀ6 00 06  
Jadran Trgovsko Podjetje  
Partizanska cesta 69  
6ꢀ10 Sezana, Slovenija  
Tel. +386 - 57 31 04 40  
Fax +386 - 57 31 04 4ꢀ  
HADJIKYRIAKOS & SONS LTD.  
Prodromou 1ꢀ1, P.O Box ꢀ1587  
1511 Nicosia, Cyprus  
Tel. +357 - ꢀꢀ 87 ꢀ1 11  
Fax +357 - ꢀꢀ 66 33 91  
CableCom AS  
Gneisveien 1ꢀ  
3ꢀꢀ1 Sandefjord, Norge  
Tel. +47 - 33 48 33 48  
Fax +47 - 33 44 60 44  
LinnSight Ltd.  
PO Box 8465  
KA 7 ꢀYF Prestwick, UK  
Tel. +44 - 1ꢀ 9ꢀ - 47 15 57  
Fax +44 - 1ꢀ 9ꢀ - 47 15 54  
Enkay Elektronik Servis Müdürlügü  
Alemdag Cad: Site Yolu No.: 10  
Ümraniye/ Istanbul, Türkiye  
Tel. +90 - ꢀ16 634 44 44  
Fax +90 - ꢀ16 634 39 88  
Ing. Ivo Tietz  
Dolní nám. 9  
746 01 Opava, Česko  
Tel.: +4ꢀ0 553 6ꢀ4 944  
Fax: +4ꢀ0 553 6ꢀ3 147  
International Dynamics (NZ) Pty Ltd  
PO Box 109 317, Newmarket  
Auckland, New Zealand  
Tel.: +64 9 379 0179  
Fax: +64 9 379 0ꢀ79  
E-mail: enquiries@internationaldynamics.  
co.nz  
SIBA Engineering S.A.  
6, Kifisou Av.,  
1ꢀꢀ 4ꢀ Aegaleo, Hellas  
Tel. +30 - ꢀ10 - 5913793  
Fax +30 - ꢀ10 - 5317755  
Videonix (Pty) Ltd  
Loewe Opta GmbH,  
P.O. Box 3195ꢀ, Kyalami 1684  
Republic of South Africa  
Tel. +ꢀ7 - 1 14 66 47 00  
Fax +ꢀ7 - 1 14 66 4ꢀ 85  
Customer Care Center  
Industriestraße 11  
96317 Kronach, Deutschland  
Tel. +49 1801–ꢀꢀꢀ56393  
Fax +49 9ꢀ61–99500  
Basys Magyarorszagi KFT  
Epitok utja ꢀ–4  
ꢀ040 Budaörs, Magyar  
Tel. +36 - ꢀ3 41 56 37 (1ꢀ1)  
Fax +36 - ꢀ3 41 51 8ꢀ  
Videoacústica  
Comercio e Representacoes de  
Equipamentos Electronicos S.A.  
Estrada Circunvalacao,  
Quinta do Paizinho, Arm. 5  
ꢀ795-63ꢀ Carnaxide, Portugal  
Tel. +351 - ꢀ 14 ꢀ4 17 70  
Fax +351 - ꢀ 14 18 80 93  
Email offi[email protected]  
© by Loewe Opta 0705ꢀ1  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

LG Electronics Air Conditioner PRHR040 User Manual
Liebherr Refrigerator CS 1601 User Manual
Logitech Video Game Headset G35 User Manual
Lowrance electronic GPS Receiver 5200C User Manual
LST Smoke Alarm GO 55000 317 User Manual
Maytag Cooktop MER7662WB0 User Manual
Melissa Coffeemaker 245 030 040 User Manual
Meyer Spreader 62209 User Manual
Midland Radio Two Way Radio GXT740 Series User Manual
Midland Radio Two Way Radio NAUTICO 3 User Manual