Lindy Projector 32498 User Manual

Wireless Projector  
Server  
User Manual  
English  
LINDY No’s. 32498, 32499  
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (March 2008)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
2. Overview  
Front Panel  
LAN LED  
Power LED  
WLAN LED  
Rear Panel  
External Antenna  
RJ-45 Port  
Power  
Switch  
Power Socket  
VGA  
Connector  
Reset to Default  
Button  
3. Installation  
3.1 Connect the power cable to the power socket on the rear of the unit  
3.2 Connect the VGA cable from your Projector to the VGA connector on the rear panel  
3.3 Turn on your projector  
3.4 Turn on the Projector server  
When the projector server is ready the “POWER” LED and “WLAN” LED will show  
green.  
When a LAN connection is established, the “LAN” LED will show green and will  
blink during data transmission  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
4 Setup  
4.1 The Projector Server is ready for use when you see the picture below  
4.2 Make sure your PC WLAN card is enabled in “network connections” in the Windows  
control panel  
4.3 To connect your PC to the Projector Server, view your available wireless networks in  
the Windows Control Panel and double click the WPS option  
4.4 Open a browser and enter the default IP address 192.168.100.10 or enter the IP  
address shown on the Projector Server screen  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
4.5 When you have successfully logged in to the Projector Server you will see the screen  
below  
4.6 Click Download on the left hand side and then click the Download box. You do not  
need to put a password in the box.  
The box below will appear, click Run and follow the on screen instructions  
4.7 After the installation is complete, the program will execute automatically and a login  
screen will appear  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
4.8 Enter the LOGIN CODE from the projector screen to start sending the display signal  
4.9 Once you have input the correct “LOGIN CODE” the picture will show on the projector  
screen  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
5 Client Utility  
5.2 Opening the Application  
5.2.1 Double click the icon on your desktop to execute the program:  
5.2.1 The program will start to search for the Projector Server automatically:  
5.2.3 When the program finds the Projector Server, the login screen will appear. Enter  
the Login Code shown on the Projector Server screen. If there are multiple  
Projector Servers in range, a list of the available connections will appear. Please  
choose the Projector Server you would like to connect to:  
5.2.4 If the Projector Server is not found then the option to reconnect will appear:  
5.3 Button Function – Projector mode  
Start/Pause projecting  
Stop projecting  
Refresh projecting screen  
Server Login Code  
Function menu  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
This icon blinks when communicating  
Minimize the program  
Exit the program  
5.3.1 Button Function – Video mode  
Start/Pause projecting  
Stop projecting  
Open folder  
Mute & volume slider control  
Timeline slider control  
Server Login Code  
Function menu  
This icon blinks when communicating  
Minimize the program  
Exit the program  
6 Web Management  
6.1 Home Page  
6.1.1 Make sure your PC has connected to the box successfully  
6.1.2 Open your browser and enter the IP address shown on the projector screen  
6.1.3 The default IP Address is 192.168.100.10:  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
6.2 Conference Control  
This function allows you to host a meeting using the WLAN connection and without the  
need for constantly swapping a patch cable.  
6.2.1 Once logged in, select the Conference Control function  
6.2.2 Enter the password (the default password and username is “trainer”) and then  
press Login  
6.2.3 After you have logged in successfully, you will see a list of users connected to  
the Projector Server  
6.2.4 The three columns show Computer Name, Play Control and IP Address  
Computer Name: The name of the PC connected to the box  
Play control Shows the current user’s projecting status  
Start projecting  
Stop projecting  
IP Address The IP address of the connected user  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
6.3 Login Web Admin  
Click Admin and then enter the password (admin) to login to the system status page:  
6.4 System Status  
Selecting System Status, shows the current system status  
Model Name: Product model name  
Versions:  
1.  
Firmware version no.: Product firmware version number  
Network Status:  
1.  
2.  
3.  
4.  
5.  
IP address  
Subnet Mask address  
Default Gateway address  
Wireless Mac address  
Wire Mac address  
Connection Status:  
1.  
Projecting status: “Waiting for projecting” or “Projecting”  
2.  
Total Users: how many users login to the box  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
6.5 Operating Mode  
IP Setup  
IP Address: The default value is 192.168.100.10  
Subnet Mask: The default value is 255.255.255.0  
Default Gateway: 192.168.100.10  
DHCP Server Setup – Can be Auto or Disabled  
Start IP: The starting IP address of the DHCP Server  
End IP: The ending IP address of the DHCP Server  
Wireless Setup – Can be Enabled or Disabled  
Region: Select your region  
SSID: The maximum length is 32 bytes  
SSID Broadcast: Enable or Disable function  
Channel: Fixed or auto channel; Selecting “Auto” means that after powering on the  
box, it will scan all of wireless channels and select clear one channel automatically.  
By choosing manual, you can select the channel you want to use  
WEP: Choose to disable WEP key or select one of 64/128bit in ASCII or HEX string  
Key Index: If WEP is enabled, set the key value according to WEP mode selected  
GateKeeper  
All Pass / All Block / Internet Only (options)  
6.6 Projection Setup  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
Resolution: Default resolution is 1024 x 768  
Colour Depth: Based on the settings on your PC  
Screen Refresh Rate: This is VGA output refresh rate, either 60 Hz and 70Hz  
Apply: Confirm and Save modifications  
Cancel: Cancel all the modifications  
6.7  
Change Passwords  
6.7.1 Enter New Password: Enter a new password for each category  
6.7.2 Confirm New Password: Confirm the new password  
6.7.3 Apply: To confirm and save modifications  
Reset to Default  
6.8  
Select the Reset to Default option to restore factory default settings and then click  
Apply to confirm  
To reset the Factory Default Settings via the hardware  
6.8.1 Power off the Projector Server  
6.8.2 On the rear panel, press and hold the Reset button and turn on the Projector  
Server  
6.8.3 Continue to hold the Reset button for 10 seconds or more  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
6.8.4 The Projector Server will now restore to Factory Default Settings  
6.9 Firmware Upgrade  
6.9.1 Download the latest version of the Firmware from www.lindy.com  
6.9.2 Save the downloaded Firmware a suitable location on your PC  
6.9.3 Click Browse to search for the downloaded file  
6.9.4 Click Upgrade to start  
6.9.5 A warning message will appear with a countdown counter on the screen  
Warning: Don’t power off the Projector Server while the firmware  
upgrade is in progress, otherwise you will cause serious damage and the  
unit will need to be returned to LINDY for repair  
6.9.6 Once the upgrade has finished a box will appear stating “update successful“  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Projector Server  
User Manual  
6.9.7 Click OK to restart the projector server  
Wall Mount Instructions  
7
8
Troubleshooting  
Q1. Can I use the old client utility software after a firmware upgrade?  
A: After the firmware upgrade is complete, we recommend you download the Client  
utility software from the Projector Server to replace the previous version. This will  
resolve any incompatibility issues  
Q2. My PC and Projector Server connection is established but the client utility can’t  
find the projector Server.  
A: (1) Check that the client utility software is not blocked by your Firewall software. If it  
is then add it to the allowed list and try again  
(2) Make sure you are using the newest version of the client utility software  
Q3. How do I know when the firmware upgrade is complete?  
A: While the firmware upgrade is in progress, the POWER LED will be “RED” and the  
LAN LED will be blinking, once the upgrade is complete then the POWER LED will  
turn yellow and LAN LED will be green  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CE/FCC  
CE Statement  
This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the  
European Union and it is equipped with the CE mark. This unit has to be used with high quality  
shielded connection cables. Only if these high quality shielded cables are used it can be sure that  
the EMC compatibility is not adversely influenced.  
FCC Statement  
Shielded cables must be used with this equipment to maintain compliance with radio frequency  
energy emission regulations and ensure a suitably high level of immunity to electromagnetic  
disturbances.  
FCC Warning  
This equipment has been tested and found to comply with the limits for a Class B Digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected  
Consult the dealer or an experienced technician for help  
You are cautioned that changes or modifications not expressly approved by the party responsible for  
compliance could void your authority to operate the equipment.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recycling Information  
WEEE (Waste of Electrical and Electronic Equipment),  
Recycling of Electronic Products  
United Kingdom  
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all  
waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical  
and electronic equipment. Instead, these products must enter the recycling process.  
Each individual EU member state has implemented the WEEE regulations into national law in  
slightly different ways. Please follow your national law when you want to dispose of any electrical or  
electronic products.  
More details can be obtained from your national WEEE recycling agency.  
Germany  
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung  
und das Recycling von Elektro- und Elektronikprodukten geschaffen. Diese wurden von der  
Bundesregierung im Elektro- und Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt.  
Dieses Gesetz verbietet vom 24.März 2006 an das Entsorgen von entsprechenden, auch alten,  
Elektro- und Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen  
Sammelsystemen bzw. örtlichen Sammelstellen zugeführt werden! Dort werden sie kostenlos  
entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernimmt die Gesamtheit der  
Gerätehersteller.  
France  
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de  
tout équipement électrique et électronique.  
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation  
DEEE de manières légèrement différentes. Veuillez suivre le décret d’application correspondant à  
l’élimination des déchets électriques ou électroniques de votre pays.  
Italy  
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di  
apparecchi elettrici ed elettronici. Non è più consentito semplicemente gettare queste  
apparecchiature, devono essere riciclate.  
Ogni stato membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare  
riferimento alle leggi del proprio Stato quando si dispone di un apparecchio elettrico o elettronico.  
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.  
LINDY No. 32498  
LINDY No. 32499  
2nd Edition march 2008  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kyocera Printer FS 2000D User Manual
Land Pride Automobile Parts 356 139A User Manual
LG Electronics GPS Receiver LN735 Series User Manual
Liebherr Refrigerator CS1660 User Manual
Lifescan Blood Glucose Meter SureStep Pro User Manual
Lincoln Electric Welding System IM318 B User Manual
Lindy Network Card 42982V0 User Manual
MB QUART Speaker DKE168 User Manual
McCulloch Blower MCB2203 User Manual
Memorex CD Player MD6457CP User Manual