Lindy Network Router 42953 User Manual

USB 2.0 Link Cable  
User Manual  
English  
LINDY No. 42953  
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (June 2005)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction  
Congratulations on your purchase of the LINDY USB 2.0 Link cable. This unique cable  
allows you to easily connect two computers via a USB port and instantly transfer files  
at great speed. The USB 2.0 Link cable is your fast solution for peer-to-peer file  
transfer between two computers via the USB port. The cable provides true plug-and-  
play capability while transferring files at much greater speeds than USB1.1.  
The SuperLink application provides a drag-and-drop user-friendly interface to transfer  
files. You simply install the application onto your PC and plug in the USB 2.0 Link  
cable.  
The VirtualNet application program provides USB Networking which emulates Ethernet.  
2. Package Contents  
°
°
Hardware:  
Software:  
USB 2.0 Link cable  
CD including drivers and manual  
3. Product Features  
°
°
°
°
USB specification revision 2.0 compliant  
Single cable solution for file transfer  
Printer and Storage (Hard drive, floppy and CD-ROM) sharing  
Drag-and-drop user-friendly interface. Includes power management and remote  
wake-up functions  
°
°
Supports TCP/IP, NetBEUI, IPX/SPX protocols  
USB Networking – Ethernet emulation  
4. System Requirements  
PC  
° IBM® PC Pentium 133 or higher or compatible system  
° Available USB2.0 port (up to 480 Mbps) or available USB1.1 port (up to 12Mbps)  
° CD-ROM drive  
° Windows® 98, Windows® ME, Windows® 2000 and Windows® XP  
USB 2.0 Link Cable User’s Manual 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Driver Installation (PC to PC File Transfer)  
5.1Windows® 98 Driver Installation  
5.1.1 Power on both computers and make sure the USB port is enabled and  
working properly. Insert the CD in to your CD-Rom drive.  
5.1.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” (D: represents CD-ROM) and double  
click on “Setup.exe” to install driver.  
Attention: Don’t plug the USB 2.0 Link cable into PC’s USB Port until  
the driver is installed.  
5.1.3 Windows® installs the driver to “C:\Program Files\SuperLink” you  
may install the driver in another folder and then click “Next” to  
continue.  
5.1.4 Click on “Finish” to complete the installation.  
USB 2.0 Link Cable User’s Manual 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.1.5 Once the installation is complete, a new icon called “SuperLink” will  
appear on your desktop.  
5.1.6 Plug the USB 2.0 Link cable into an available USB Port on the PC, the  
pc will detect and install a new item “USB SuperLink Adapter” within  
“Universal Serial Bus controllers” in “Device Manager”.  
USB 2.0 Link Cable User’s Manual 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2 Windows® 98 Driver Un-Installation  
If you don’t want to use this cable and want to delete the driver from the PC  
then please use the following un-install procedure.  
Attention: Before you go through the un-installation procedure, please make  
sure that the USB 2.0 Link cable has been unplugged from the PC.  
5.2.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” and double click on “Setup.exe”.  
5.2.3 Select “Only remove USB Link Adapter driver”, then click “Next” to  
continue.  
5.2.4 Click “Finish” to complete this un-installation.  
USB 2.0 Link Cable User’s Manual 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3 Windows® ME Driver Installation  
5.3.1 Power on both computers and make sure the USB port is enabled and  
working properly. Insert the CD in to your CD-Rom drive.  
5.3.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” (D: represents CD-ROM) and double  
click on “Setup.exe” to install driver.  
Attention: Don’t plug the USB 2.0 Link cable into the PC’s USB Port  
until the driver is installed.  
5.3.3 Windows® will install the driver to “C:\Program Files\SuperLink”,  
you may install the driver in another folder and click “Next” to  
continue.  
5.3.4 Click on “Finish” to complete this installation.  
USB 2.0 Link Cable User’s Manual 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3.5 Once the installation is complete, a new icon called “SuperLink” will  
appear on your desktop.  
5.3.6 Plug the USB 2.0 Link cable into an available USB Port on the PC, the  
pc will detect and install a new item “USB SuperLink Adapter” within  
“Universal Serial Bus controllers” in “Device Manager”.  
USB 2.0 Link Cable User’s Manual 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.4 Windows® ME Driver Un-Installation  
If you don’t want to use this cable and want to delete the driver from the PC  
then follow the un-install procedure as following.  
Before you go through the un-installation procedure, please make sure that the  
USB 2.0 Link cable has been unplugged from the PC.  
5.4.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” and double click on “Setup.exe”.  
5.4.2 Select “Only remove USB Link Adapter driver”, then click “Next”  
to continue.  
5.4.4. Click “Finish” to complete this un-installation.  
USB 2.0 Link Cable User’s Manual 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.5 Windows® 2000 Driver Installation  
5.5.1 Power on both computers and make sure the USB port is enabled and  
working properly. Insert the CD in to your CD-Rom drive.  
5.5.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” (D: represents CD-ROM) and double  
click on “Setup.exe” to install driver.  
Attention: Don’t plug the USB 2.0 Link cable into PC’s USB Port until  
the driver is installed.  
5.5.3 Windows® will install the driver to “C:\Program Files\SuperLink”,  
you may install the driver in another folder and then click “Next” to  
continue.  
5.5.4 Click on “Finish” to complete this installation.  
USB 2.0 Link Cable User’s Manual 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.5.5 Once installation is complete, a new icon “SuperLink” will appear on  
your desktop.  
5.5.6 Plug the USB 2.0 Link cable into an available USB Port, , the pc will  
detect and install a new item “USB SuperLink Adapter” within  
“Universal Serial Bus controllers” of “Device Manager”.  
USB 2.0 Link Cable User’s Manual 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.6 Windows® 2000 Driver Un-Installation  
If you don’t want to use this cable and want to delete the driver from the PC  
then just follow the un-install procedure as following.  
Before you go through the un-installation procedure, please make sure that the  
USB 2.0 Link cable has been unplugged from the PC.  
5.6.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” and double click on “Setup.exe”.  
5.6.2 Select “Only remove USB Link Adapter driver”, then click “Next”  
to continue.  
5.6.3 Click “Finish” to complete this un-installation.  
USB 2.0 Link Cable User’s Manual 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.7Windows® XP Driver Installation  
5.7.1 Power on both computers and make sure the USB port is enabled and  
working properly. Insert the CD in to your CD-Rom drive.  
5.7.2 Select path of “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” (D: represents CD-ROM) and  
double click on “Setup.exe” to install driver.  
Attention: Don’t plug the USB 2.0 Link cable into PC’s USB Port until  
the driver is installed.  
5.7.3 Windows® will install the driver to “C:\Program Files\SuperLink”,  
you may install the driver in another folder and then click “Next” to  
continue.  
5.7.4 Windows® will show a warning message as following, press  
“Continue Anyway” to continue with this installation.  
USB 2.0 Link Cable User’s Manual 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.7.5 Click on “Finish” to complete this installation.  
5.7.6 After installation is complete a new icon “SuperLink” will appear on  
your desktop.  
5.7.7 Plug the USB 2.0 Link cable into PC’s USB Port, then “Found New  
Hardware Wizard” will help you to install driver. Select “Install the  
software automatically [Recommended]” and click “Next” to  
continue.  
USB 2.0 Link Cable User’s Manual 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.7.8 Windows® will show a warning message as following, press  
“Continue Anyway” to go on this installation.  
5.7.9 Click on “Finish” to complete this installation.  
5.7.10 Plug the USB 2.0 Link cable into a USB Port, , the pc will detect and  
install a new item “USB SuperLink Adapter” at “Universal Serial  
Bus controllers” of “Device Manager”.  
USB 2.0 Link Cable User’s Manual 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.8 Windows® XP Driver Un-Installation  
If you don’t want to use this cable and want to delete the driver from the PC  
then just follow the un-install procedure as following.  
Before you go through the un-installation procedure, please make sure that the  
USB 2.0 Link cable has been unplugged from the PC.  
5.8.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\  
WINDOWS\Super Link_Install” and double click on “Setup.exe”.  
5.8.2 Select “Only remove USB Link Adapter driver”, then click “Next”  
to continue.  
5.8.3 Click “Finish” to complete this un-installation.  
USB 2.0 Link Cable User’s Manual 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Running the SuperLink Application Program (PC to PC File Transfer)  
6.1Windows 98, ME, Windows 2000 & Windows XP  
Follow the steps below on how to run the SuperLink application program:  
The installation of the application is similar for all four operating systems. We  
have used Windows® 2000 for this example.  
6.1.1 Once PC#1 and PC#2 have finished installing the driver, connect  
each end of the USB 2.0 Link cable to PC#1 and PC#2.  
6.1.2 Double click on the icon “SuperLink” on the desktop of PC#1 and  
PC#2. Then the following display will show up. The bottom left hand  
will display “Connecting” which means it is trying to connect with the  
remote PC.  
6.1.3 Once both of the computers are connected, the bottom left hand will  
display “Remote connected”.  
6.1.4 You can cut, copy, paste, or drag files and folders between the two  
computers just like Windows® Explorer file manager.  
USB 2.0 Link Cable User’s Manual 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.1.5 The remote site will display “It’s busy now, please wait ….”  
7. Using USB Networking (Ethernet Emulation)  
7-1 Windows® 98, Windows® ME, Windows® 2000, Windows® XP Driver  
Installation  
Insert the CD in to your CD-Rom drive.  
Select the path “D:\DRIVER\ USB 2.0 LINK CABLE 42953\WINDOWS\Virtual  
Network_Install” (D: represents CD-ROM) and double click on “Setup.exe” to  
install the driver.  
Attention: Don’t plug the USB 2.0 Link cable into the PC’s USB Port until the  
driver has completed installing.  
7-2 Use USB Networking  
Plug the USB 2.0 Link Cable into an available USB port. Once the installation  
has completed Windows® will install a network driver for this device. The USB  
2.0 Link Cable may now be used as an Ethernet adapter.  
USB 2.0 Link Cable User’s Manual 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. FAQ  
Q: What if the USB 2.0 Link cable can’t be successfully installed?  
A: This situation is common when your USB 2.0 port is a PCI card.  
If your USB 2.0 PCI Card uses a Microsoft driver then please download version  
5.1.2600 (used with Windows 2000 & XP) from the Microsoft Web site.  
Q: How do I know the two PC’s are successfully connected?  
A: The bottom of the screen will show “Remote Connected” on both computers.  
Q: Should I un-install the driver each time the cable is unplugged?  
A: You don’t have to un-install the driver each time you unplug the cable. Unless  
you don’t want to use the cable any more, then you could un-install it and  
remove the driver from your PC.  
Q: How can I connect 3 PCs to form a USB Network?  
A: Connect the USB type A male connector of Cable#1 to PC1, connect USB type  
A male connector of Cable#1 to PC2. Then connect USB type A male connector  
of Cable#2 to PC2 and connect USB type A male connector of Cable#2 to PC3.  
If you want to connect PC4 to this USB Network then connect Cable#3 to PC1  
and PC4.  
9. Disclaimer  
Information in this document is subject to change without notice. The manufacturer  
does not make any representations or warranties (implied or otherwise) regarding  
the accuracy and completeness of this document and shall in no event be liable for  
any loss of profit or any other commercial damage, including but not limited to  
special, incidental, consequential, or other damages.  
No part of this document may be reproduced or transmitted in any form by any  
means, electronic or mechanical, including photocopying, recording or information  
recording and retrieval systems without the express written permission of the  
manufacturer.  
All brand names and product names used in this document are trademarks, or  
registered trademarks of their respective holders.  
USB 2.0 Link Cable User’s Manual 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. FCC Statement  
This device generates and uses radio frequency and may cause interference to  
radio and television reception if not installed and used properly. This has been  
tested and found to comply with the limits of a Class B computing device in  
accordance with the specifications in Part 15 of FCC Rules. These specifications  
are designed to provide reasonable protection against such interference in a  
residential installation. However, there is no guarantee that interference will not  
occur in a particular installation. If this device does cause harmful interference to  
radio or television reception, which can be determined by plugging the device in  
and out, the user can try to correct the interference by one or more of the  
followings:  
°
°
°
Reorient or relocate the receiving antenna.  
Increase the separation between the device and receiver.  
Connect the computer into an outlet on a circuit different from that to which the  
receiver is connected.  
°
Consult the dealer or an experienced radio/TV technician for help.  
USB 2.0 Link Cable User’s Manual 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Land Pride Lawn Mower FDR2572 User Manual
Lanier Printer Accessories 480 0021 User Manual
Lenovo Personal Computer 10097 2566 User Manual
LG Electronics Microwave Oven NE 1027 User Manual
Line 6 Headphones headphones powered monitors User Manual
Logitech Universal Remote 885 User Manual
Magnasonic Handheld Game System MIGAME1000 User Manual
Marantz DVD Player BD7004 User Manual
MGE UPS Systems Power Supply 225KVA User Manual
Midland Radio Two Way Radio GXT900 Series User Manual