Lindy Network Card 51103 User Manual

Introduction  
Thank you for purchasing the LINDY PCMCIA/CardBus Adapter.  
With this “Plug & Play” 32 Bit PCI card you can upgrade your  
desktop PC to support Notebook style PCMCIA/CardBus cards.  
The card features two independent PC Card sockets which both  
support Type I, II & III PC Cards. This allows you to mix and  
match 5V/3.3V 16 Bit PCMCIA and 3.3V CardBus Cards. For  
maximum versatility, the card features both standard and low  
profile back plates.  
PCMCIA/CardBus  
Adapter Card  
Features  
User Manual  
English  
ƒ
ƒ
32 Bit/33MHz fully compliant PCI-host interface  
Two independent PC Card sockets, compliant with the PC  
Card standard 7.1  
ƒ
ƒ
Supports Type I, Type II and Type III PC Cards  
Can be used with 5V/3.3V 16 Bit PCMCIA & 3.3V CardBus  
Cards  
ƒ
ƒ
ƒ
ƒ
ƒ
Supports hot-plugging and removal of cards  
Supports flash media and smart card PC Card adapters  
Texas Instruments chipset  
“Plug & Play” - no special software to install  
Compatible with Windows 98/ME/2000/XP  
Package Contents  
ƒ
ƒ
ƒ
PCMCIA/CardBus Adapter Card  
Standard and Low Profile back plates  
This manual  
LINDY No. 51103  
For Home and Office Use  
Tested to Comply with FCC Standards  
Verifying the installation  
Hardware Installation  
To verify correct installation, start Windows Device Manager.  
For example, in XP click:  
Important: Before beginning the installation we recommend you  
use an anti-static wrist strap to prevent possible damage to the  
sensitive internal components in your computer.  
Start >Control Panel > System > Hardware >Device Manager  
The card must be installed into a 32 Bit PCI expansion slot in a  
PC.  
You should see an entry similar to this:  
For standard desktop/tower PCs  
the correct back plate is already  
installed. For low profile PCs you  
should install the low profile back  
plate:  
Back plate is secured  
by these two screws.  
1. Power down your computer and unplug from the mains.  
2. Remove the case cover.  
3. Locate an available 32 Bit PCI slot.  
4. Remove the slot blanking plate and retain the screw.  
5. Carefully insert the card into the PCI slot.  
6. Secure the card using the retained screw.  
7. Replace the case covers, plug the system back into the  
mains and switch on.  
8. The drivers for the card will be automatically installed by the  
operating system.*  
* Windows 98 users may be prompted to insert their  
Windows CD.  
2nd Edition November 2005  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Outdoor Shower Z504020000 User Manual
Leica Digital Camera V LUX 1 User Manual
LG Electronics Cell Phone RD2530 User Manual
LG Electronics Refrigerator LSC27990TT User Manual
Lincoln Electric Welder CV320 I User Manual
Link electronic Network Router 862 XL1616HD 2 User Manual
Makita Impact Driver 6934 User Manual
Manitowoc Ice Ice Maker 7622073 User Manual
Memorex CRT Television MT2251 User Manual
Memorex MP3 Player MC7100 User Manual