Memorex CRT Television MT2251 User Manual

ENGLISH  
SPECIFICATIONS  
OWNER'S  
MANUAL  
AC Power Input:  
AC Power Consumption:  
Chassis Construction:  
Picture Tube: 25" (measured diagonally)  
Audio Power Output Rating:  
1.5 Watts  
120V, 60Hz  
115 Watts  
IC Solid state  
Receiving Channels:  
VHF  
UHF  
CATV  
2-6  
14-69  
01-97 (5A)-(A-3)  
98-99 (A-2)-(A-1)  
14-22 (A)-(I)  
25" COLOR TELEVISION  
Speaker:  
Tuner Type:  
1.5" x 2.7" Full Range, 8 ohm  
181 Channel, Quartz PLL  
Frequency Synthesized  
23-36 (J)-(W)  
37-65 (AA)-(FFF)  
66-125 (GGG)-(125)  
MT2251  
Remote Control: Infrared, Direct Access,  
2 x AAA batteries  
Antenna Input Impedance:  
75 Ohm (VHF/UHF/CATV)  
Coaxial Input  
CAUTION  
Changes or modifications not expressly approved by the party responsible for  
compliance with the FCC Rules could void the user's authority to operate this  
equipment,  
Dimensions:  
24 1/3" (W) x 19 2/3" (D) x 20 2/3" (H)  
59.9 Ibs  
ATTENTION  
Weight:  
For your protection in the event of theft or loss of loss of this product, please fill in  
the information listed below which is for your own personal records.  
Date of Purchase  
Serial No.  
Place of Pufchase  
:
:
:
ACCESSORIES  
Remote Control  
TV/CATV MODE SELECTION  
When shipped from the factory, the TV/CATV menu option is set to the "CATV"  
(Cable Television) mode. If not using CATV, set this menu option to "TV " mode.  
FEATURES  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE PLEASE CALL:  
Quartz PLL Frequency Synthesized Tuning System - Electronically locks in and  
memorizes available channels for perfect reception.  
1-800-919-3647  
181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF  
standard broadcast channels that are available in your area. When operating on a cable  
system, it can tune to the standard VHF channel frequencies plus up to 113 cable  
channel frequencies. The actual number of channels received depends upon channel  
reception in your area or your cable system.  
On-Screen 3 Language Display - Consists of channel, sleep timer, volume level,  
muting, text/caption indicators and picture control adjustments. These can be displayed  
in English, Spanish or French.  
FOR CUSTOMER SERVICE PLEASE CALL OR WRITE TO:  
Memcorp Warranty Service  
1200 E. Broadway  
Princeton, Indiana 47670  
(812)386-3200  
Picture Adjustments Using The Remote Control - The On-Screen display allows  
precise remote control adjustment of BRIGHTNESS, COLOR, CONTRAST,  
SHARPNESS and TINT.  
Sleep Timer - Operable from the remote control, this TV can be programmed up to 120  
minutes to turn off automatically.  
Memory Back Up - This system prevents loss of memorized channel selections in case  
a power interruption should occur.  
V-Chip - The V-Chip function can rate a TV program or a movie content. It allows you to  
set a restriction level.  
Closed Captioned Decoder - Displays text captions or 1/3 of full screen text on the  
screen for hearing impaired viewers.  
3I00101A K  
99/05  
Printed in Thailand  
ANTENNA/CATV CONNECTIONS  
Combination VHF/UHF Antenna (Single 75 ohm  
cable or 300 ohm twin-lead wire)  
Connect the 75 ohm cable from a combination VHF/UHF  
antenna to the antenna jack.  
If your combination antenna has a 300 ohm twin-lead wire,  
use the 300-75 ohm matching transformer (not supplied).  
Combination VHF/UHF Antenna  
Single 75 ohm cable  
Combination VHF/UHF Antenna (Separate VHF  
and UHF 300 ohm twin-leads)  
Connect the UHF twin-lead wire to a combiner (not supplied).  
Connect the VHF twin-lead to the 300-75 ohm matching  
transformer (not supplied). Attach the transformer to the  
combiner. Attach the combiner to the antenna jack.  
300 ohm twin-lead wire  
Splitter  
Separate VHF/UHF Antennas  
Connect the 75 ohm cable from the VHF antenna and the  
UHF antenna twin-lead to a combiner (not supplied). Attach  
the combiner to the antenna jack.  
NOTE:If your VHF antenna has a twin-lead wire, use the  
300-75 ohm matching transformer (not supplied), then  
connect the transformer to the combiner.  
300-75 Ohm Matching  
Transformer  
(not supplied)  
Take off the Splitter  
UHF Antenna  
300 ohm twin-lead wire  
For Subscribers of Basic Cable TV Service  
VHF Antenna  
For basic cable service not requiring a converter/  
descrambler box, connect the CATV 75 ohm coaxial cable  
directly to the antenna jack on the back of the television.  
Single 75 ohm cable  
For Subscribers of Scrambled Cable TV Service  
If you subscribe to a cable service which requires the use of  
a converter/descrambler box, connect the incoming cable to  
the converter/descrambler box and connect the output of  
the box to the antenna jack on the back of the television.  
Follow the connections shown left. Set the television to the  
output of the converter/descrambler box (usually channel 3 or  
4) and use the converter/descrambler box to select  
channels.  
300 ohm twin-lead wire  
Combiner  
(not supplied)  
300-75 Ohm matching  
transformer  
Incoming CATV  
(not supplied)  
For Subscribers of Unscrambled Basic Cable  
with Scrambled Premium Channels  
Converter/Descrambler  
This television has an extended tuning range and  
can tune most cable channels without using a cable  
company supplied converter box. Some cable  
companies offer "premium pay channels" in which  
If you subscribe to a cable service in which basic cable  
channels are unscrambled and premium channels require  
the use of a converter/descrambler box, you may wish to  
Converter/Descrambler  
A/B Switch  
the signal is scrambled. Descrambling these signals use a two-set signal splitter (sometimes called a "two-set  
A
Splitter  
B
for normal viewing requires the use of a descrambler  
device which is generally provided by the cable  
company.  
coupler") and an A/B switch box from the cable installer or  
an electronics supply store. Follow the connections shown  
on left. With the switch in the "B" position, you can directly  
tune any nonscrambled channels on your TV. With the  
switch in the "A" position, tune your TV to the output of the  
converter/descrambler box (usually channel 3 or 4) and use  
the box to tune scrambled channels.  
3I0-0101A E  
2
1/1/32, 09:50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
CLOSED CAPTION  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display Closed Captioned television programs.  
Closed Captioning will display text on the screen for hearing impaired viewers or it will translate  
and display text in another language.  
CLOSED CAPTIONING WITH A VCR  
Closed Captioned programs can be recorded and played back on a VCR with the Closed  
Captioned text intact. The Closed Captioned text will disappear during Cue (Fast Forward  
Search), Review (Rewind Search) and Pause Modes or if the VCR tracking is not adjusted  
properly.  
Captions: This Closed Caption Mode will display text on the screen in English or another  
language (depending on the setting of the Closed Captions CH. 1/2 button). Generally, Closed  
Captions in English are transmitted on Captions Channel 1 and Closed Captions in other  
languages are transmitted on Captions Channel 2.  
1 2  
3
4
Text: The Text Closed Caption Mode will usually fill 1/3 of full screen with a programming  
schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until  
it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial  
or a break in the signal, the Captions will reappear when the signal is received again. If the  
channels are changed, the Captions will be delayed approximately 10 seconds.  
The Captions will appear in places on the screen where they will least interfere with the picture,  
usually on the bottom of the screen. News programs will usually show three-line Closed  
Captions which scroll onto the screen. Most other shows provide two or three lined Captions  
placed near the character who is speaking so the viewer can follow the dialogue.  
Words in italics or underlined describe titles, words in foreign languages or words requiring  
emphasis. Words that are sung usually appear enclosed by musical notes.  
1. Power Button - Press to turn the TV on or off.  
2. Volume /Buttons - Press to raise or lower the volume of the sound.  
(MENU Buttons) - Press the both button to display the On- Screen menu function.  
(SET+/– Buttons) - Press the select the desired setting during On-Screen operations.  
3. Channel /Buttons - Press to select a higher or lower numbered channel set into  
memory.  
(ENTER Buttons)- Press to enter or select information for On-Screen operations.  
(RESET Buttons) - Press to reset the On-Screen picture adjustments to their factory preset  
positions.  
4. Remote Sensor - Signals from the Remote Control unit are received here.  
For television programs broadcasting with Closed Captions, look in your TV guide for the  
Closed Captions symbol (CC).  
SETTING LANGUAGE  
• When activating the Closed Captioned Decoder, there will be a short delay before the  
Closed Captioned text appears on the screen.  
• Closed Captioned text is only displayed in locations where it is available.  
• If no caption signal is received, no captions will appear, but the television will remain in  
the Caption Mode.  
• Misspellings or unusual characters may occasionally appear during Closed Captioning.  
This is normal with Closed Captioning, especially with live programs. This is because  
during live programs, captions are also entered live. These transmissions do not allow  
time for editing.  
• When Captions are being displayed, on-screen displays, such as volume and mute may  
not be seen or may interfere with Closed Captions.  
• Some cable systems and copy protection systems may interfere with the Closed  
Captioned signal.  
This TV can display the channel number, on screen displays and picture adjustments on the  
screen in English, Spanish or French.  
On-screen language selection (step 3) will automatically appear on the screen when you press  
the MENU button initially. Select language to use the other menu options.  
MENU  
Press the MENU button.  
CH SET  
1
PICTURE  
LANGUAGE  
Press the SET + or – button to select the LANGUAGE  
mode, then press the ENTER button.  
V-CHIP SET  
2
PRESS : + / – / ENTER / MENU  
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder  
may not appear or may appear with strange characters or misspelled words. In this  
case, adjust the antenna for better reception or use an outdoor antenna.  
Press the SET + or – button until the " " indicator  
points to the desired language: English (ENGLISH),  
Spanish (ESPAÑOL) or French (FRANCAIS), then  
press the ENTER button.  
3
LANGUAGE / LENGUA / LANGUE  
ENGLISH  
ESPAÑOL  
FRANCAIS  
SETTING V-CHIP  
PRESS : + / – / ENTER / MENU  
Press the MENU button again.  
4
This TV is fitted with a V-CHIP controller which provides you with channel viewing access  
controls and restrictions.  
NOTE:  
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,  
but the Closed Caption text will not be affected by the language selection.  
1
Press the SET + or – button to select the V-CHIP SET option, then press the ENTER button.  
Enter your password using the Direct channel selection buttons.  
In the event of entering incorrect password press the RESET button. Then press the  
ENTER button.  
TV OPERATION  
2
To turn on the TV, press the POWER button.  
1
Enter the same password for confirmation, then press the ENTER button.  
3
The Volume can be adjusted to a desired level by pressing the VOL (VOLUME) or ▼  
button.  
2
Press the SET + or – button to select the V-CHIP option.  
Press the ENTER button to select the ON.  
4
The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER.  
As the sound level increases, so do the number of BARS AND THE NUMBER on the  
screen. The same is true for decreasing the level.  
Press the SET + or – button to select the TV RATING or MOVIE RATING option. Press  
the ENTER button.  
5
Set the TV/CATV menu option to the appropriate position. When shipped from the  
factory, this menu option is in the CATV setting. See "To Memorize Channels".  
Press the SET + or – button to select the desired rating for the applicable video or TV  
channel. Press the ENTER button.  
3
6
TV - VHF/UHF channels  
CATV - CABLE TV channels  
TV RATING  
SET –  
TV-Y7  
SET +  
TV-G TV-PG  
OFF  
TV–Y  
TV-14  
TV-MA  
CH (CHANNEL) and buttons  
4
Press and release the CH (CHANNEL) or button. The channel automatically stops  
at the next channel set into memory. Press and hold the button down to change channels  
more quickly.  
TV-Y : all children  
TV-PG : parental guidance  
TV-14 : 14 years old and above  
TV-MA : 17 years old and above  
TV-Y7 : 7 years old and above  
TV-G : childrens program  
For proper operation, before selecting channels, they should be set into the TV's  
memory. See "To Memorize Channels".  
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press the CALL button to show the  
contained rating.  
DIRECT CHANNEL SELECTION buttons (0-9) - Press these buttons to select a  
channel.The channel number will appear on the upper right corner of the TV screen. If an  
invalid channel number is selected, the display will revert to the original channel.  
TV MODE DIRECT CHANNEL SELECTION - When the TV/CATV menu option is in the  
TV position, all channels can be instantly selected by using two buttons. (For example, to  
select channel 2, press "0", then "2". If you press only "2", channel selection will be  
delayed for a few seconds). For channels 10 and above, press the 2 digits in order.  
Press the SET + or – button to select the the desired item you want. Press the ENTER button  
to select the OFF.  
MOVIE RATING  
SET –  
PG  
SET +  
PG-13  
OFF  
G
R
NC-17  
X
G
PG  
: all ages  
: parental guidance  
R
: under 17 years old parental  
guidance suggested  
NC-17 : 17 years old and above  
: adult only  
NOTE FOR CHANNELS 1-19:  
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 4  
seconds.  
PG-13 : parental guidance  
less than 13 years old  
X
Press the MENU button three times to return to normal TV viewing.  
7
CATV mode direct channel selection -  
When the TV/CATV menu option is in the CATV position, channels can be selected as  
follows:  
NOTES:  
• The V-Chip function is activated only on programs and tapes that have the rating signal.  
• Once you block a program using the V-Chip function, the blocked program cannot be  
watched based on the content of the show. When the program starts, the "ENTER  
PASSWORD" will appear on the screen. When you want to release the V-Chip temporarily,  
enter the password.  
If you change the channel or turn off and on the TV while releasing the V-Chip temporarily,  
the V-Chip setting will be resumed.  
• When you watch the TV from the cable box or the VCR with the RF Modulator, then you  
release the V-Chip temporarily, the V-Chip setting will not be resumed until you turn off the TV.  
The TV channel is not used in this case.  
1-9  
Press "0" twice, then 1-9 as needed.  
(Example, to select channel 2, press 002)  
Press "0", then remaining 2 digits.  
(Example, to select channel 13, press 013).  
Press the 2 digits in order.  
10-19  
20-99  
100-125  
(Example, to select channel 36, press 36).  
Press the 3 digits in order.  
(Example, to select channel 120, press 120).  
• When changing the channel with the cable box or the VCR, approximately 10 seconds will  
pass until the program appears.  
NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off  
after 15 minutes.  
3I0-0101A E  
4
1/1/32, 09:50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING PICTURE  
TO MEMORIZE CHANNELS  
You can adjust the settings for color, sharpness, contrast, brightness and tint.  
This TV is equipped with a channel memory feature which allows channels to skip up or down  
to the next channel set into memory, skipping over unwanted channels.  
Before selecting channels, they must be programmed into the TV's memory. In addition to  
normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this  
TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the  
factory, this menu option is in the CATV setting.  
Press the MENU button.  
1
Press the SET + or – button until the indicator next to "PICTURE" begins  
to flash, then press the ENTER button.  
2
TV/CATV SELECTION  
3
Press the ENTER button repeatedly to select the item you want to adjust.  
BRIGHTNESS CONTRAST COLOR TINT SHARPNESS  
Press the MENU button.  
1
MENU  
CH SET  
PICTURE  
Press the SET + or – button until the indicator next to "CH SET"  
begins to flash, then press the ENTER button.  
2
LANGUAGE  
V-CHIP SET  
PRESS : + / – / ENTER / MENU  
Press the SET + or – button to adjust the setting.  
4
Press the SET + or – button until the indicator next to "TV/CATV"  
begins to flash.  
3
TV  
CATV  
AUTO CH MEMORY  
ADD / DELETE  
+
Press the ENTER button to select the TV or CATV mode. The  
arrow indicates the selected mode.  
4
5
BRIGHTNESS  
CONTRAST  
COLOR  
increase brightness  
increase contrast  
brilliant color  
decrease brightness  
decrease contrast  
pale color  
PRESS : + / – / ENTER / MENU  
Press the MENU button twice to return to normal TV viewing.  
The chart below is typical of many cable system channel allocations.  
TINT  
greenish color  
reddish color  
CATV CHART  
makes picture  
clearer  
SHARPNESS  
makes picture softer  
Number on this TV  
Corresponding CATV channel  
14  
A
15  
B
16  
C
17  
D
18  
E
19  
F
20  
G
21  
H
22  
I
23  
J
24  
K
25  
L
26  
M
27  
N
28  
O
29  
P
30  
Q
31  
R
32  
S
33  
T
34  
U
35  
V
36  
W
37  
38  
39  
40  
AA BB CC DD  
41  
42  
43  
44  
45  
II  
63  
46  
JJ  
64  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
TO RETURN TO INITIAL SETTING  
Press the RESET button while the picture adjusting mode appears on-screen.  
EE FF GG HH  
KK LL MM  
NN OO PP QQ RR SS TT UU VV  
59  
60  
61  
62  
65  
66  
67  
68  
III  
69  
70  
71  
73  
74  
75  
76  
72  
MMM  
WW AAA BBB CCC DDD EEE FFF GGG HHH  
JJJ KKK LLL  
NNN OOO PPP QQQ  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
86  
87  
87  
88  
88  
89  
89  
90  
90  
91  
91  
92  
92  
93  
93  
94  
94  
RRR SSS TTT UUU VVV WWW XXX YYY ZZZ  
95  
96  
97  
98  
99 100 101 102 103  
104 105 106 107 108 109 110 111 112  
104 105 106 107 108 109 110 111 112  
122 123 124 125 01  
122 123 124 125 5A  
TROUBLESHOOTING GUIDE  
A-5 A-4 A-3 A-2 A-1 100 101 102 103  
113 114 115 116 117 118 119 120 121  
113 114 115 116 117 118 119 120 121  
Before requesting service, please refer to the following chart for the symptom and possible solution.  
NOTE: Contact your cable company to determine the type of cable system used in your area.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
• Make sure the power cord is plugged in.  
• Try another AC outlet.  
AUTOMATIC CHANNEL MEMORY  
TV does not operate  
MENU  
• Power is off, check fuse or circuit breaker.  
• Unplug unit for an hour, then plug it back in.  
Press the MENU button.  
1
CH SET  
PICTURE  
LANGUAGE  
• Station or CATV experiencing problems, tune to another station.  
• Check sound adjustments (Volume and Muting).  
• Check for sources of possible interference.  
Press the SET + or – button until the indicator next to "CH SET"  
begins to flash, then press the ENTER button.  
2
V-CHIP SET  
Poor sound or No sound  
Poor picture or No picture  
PRESS : + / – / ENTER / MENU  
TV  
CATV  
Press the SET + or – button until the indicator next to "AUTO CH  
MEMORY" begins to flash, then press the ENTER button. The  
TV will begin memorizing all the channels available in your area.  
3
• Station or CATV experiencing problems, tune to another station.  
• Check antenna or CATV connections, adjust antenna.  
• Check for sources of possible interference.  
AUTO CH MEMORY  
ADD / DELETE  
PRESS : + / – / ENTER / MENU  
• Check picture control adjustments.  
4
Press the MENU button twice to return to normal TV viewing.  
• Station or CATV experiencing problems, tune to another station.  
• Station signal is weak, adjust antenna to receive weaker station.  
• Check for sources of possible interference.  
Poor reception on some  
channels  
TO ADD/DELETE CHANNELS  
• Station or CATV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• Check picture control adjustments.  
• Check antenna or CATV connections, adjust antenna.  
• Check for sources of possible interference.  
Press the MENU button.  
1
MENU  
Poor color or no color  
CH SET  
Press the SET + or – button until the indicator next to "CH SET"  
begins to flash, then press the ENTER button.  
PICTURE  
2
LANGUAGE  
V-CHIP SET  
PRESS : + / – / ENTER / MENU  
• Station or CATV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• CATV company is scrambling signal.  
Press the SET + or – button until the indicator next to "ADD/  
DELETE" begins to flash, then press the ENTER button.  
3
Picture wobbles or drifts  
No CATV reception  
TV  
CATV  
• Check antenna adjustment.  
AUTO CH MEMORY  
ADD / DELETE  
Select the desired channels to be memorized or deleted using  
the Direct Channel Selection buttons (10 keys, 0-9), the CH or  
4
• Check all CATV connections.  
• Set TV/CATV menu option to the CATV mode.  
• Station or CATV system problems, try another station.  
PRESS : + / – / ENTER / MENU  
button or the SET + or – button.  
ADD  
CH 012  
Horizontal or diagonal  
bars on screen  
• Check antenna connections, adjust antenna.  
• Check for sources of possible interference.  
Press the ENTER button to select ADD or DELETE.  
5
If an unmemorized channel was selected (step 4), the channel  
indication will be red. Press the ENTER button if you wish to ADD  
the unmemorized channel. The channel indicator will change  
from red to green when a channel is added and the channel will  
be memorized.  
• Make sure TV/CATV menu option is in the appropriate mode.  
• If using antenna, check UHF antenna connections.  
No reception above  
channel 13  
PRESS : + / – / ENTER / MENU  
• Batteries are weak, dead or inserted incorrectly.  
• Remote is out of range, move closer to TV within 15 feet.  
• Make sure Remote is aimed at sensor.  
• Confirm there are no obstructions between the Remote and the TV.  
• Make sure the power cord is plugged in.  
No Remote operation  
TV shuts off  
If a memorized channel was selected (step 4), the channel  
indication will be green.  
Press the ENTER button if you wish to DELETE the channel from  
memory. The channel indicator will change from green to red  
when a channel is deleted.  
• No broadcast on station tuned.  
• Sleep Timer is set.  
• Power interrupted.  
Repeat Steps 4 and 5 for each channel to be added or deleted.  
• TV station experiencing problems or program tuned is not closed  
captioned. Try another channel.  
• Check CATV connection or VHF/UHF antenna, reposition or rotate  
antenna.  
Press the MENU button three times after adding or deleting all of  
the desired channels, to return to normal TV viewing.  
6
Closed - Caption is not  
activated.  
• Press TV/CAPTION/TEXT button to turn on the closed caption de-  
coder.  
• Select proper language in the menu options.  
Display is not shown in  
your language.  
3I0-0101A E  
5
1/1/32, 09:51  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenovo Network Card 45K5296 User Manual
LG Electronics Air Conditioner LCN240CP User Manual
Link electronic Portable Generator PDR 870 User Manual
Magnavox CRT Television 13MT1432 17 13MT1433 17 User Manual
MartinLogan Speaker Voyage User Manual
Maytag Mixer KV25MCXCU5 User Manual
MB QUART Car Stereo System REF1800 User Manual
Melissa Microwave Oven 253 013 User Manual
Memorex Flat Panel Television MLT3221 User Manual
MGE UPS Systems Power Supply 225KVA User Manual