Lindy Computer Hardware 70914 User Manual

70914  
PCI 32 bit P&P  
Agere IEEE 1394  
3+1 Ports PCI Host  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1394 (Fire Wire) User's Manual  
1.0 What is IEEE 1394  
The 1394 standard was defined, and continues to be maintained, by the Institute of  
Electrical and Electronics Engineers, Inc. (IEEE). The technology allows for  
high-speed connections between computers and related devices and helps bridge the  
divide between computers and consumer electronics. The technology is flexible, easy  
to use and offers high bandwidth at a low cost.  
With 1394-compatible products and systems, users can transfer video or still images  
from a camera or camcorder to a printer, PC, or television quickly, with no image  
degradation.  
2.0 1394 Features  
The 1394 standard is a high-speed serial bus designed to deliver high data transfer  
speeds at a low cost, and with the low degree of latency required by a peripheral bus  
or by a backup to a traditional parallel bus. Among its key features are:  
High Speed. Speeds of 100, 200 and 400 megabits per second (Mbps) are  
currently supported.  
Isochronous Support. Deterministic bandwidth allocation guarantees bandwidth  
for time-sensitive applications, such as real-time video feeds, that could  
otherwise be disrupted by heavy bus traffic.  
Flexible Topology. Devices can be daisy-chained and no central bus  
supervision is required.  
Hot-Plug Support. The bus is dynamically reconfigured whenever new nodes  
are added, which means users don’t have to configure node IDs or unique  
termination schemes.  
Cable Power. Low-cost peripherals can be powered directly from the 1394 cable,  
so no dedicated power supply is needed.  
Open IEEE Standard. IEEE adoption has increased industry acceptance of the  
standard.  
Optimum Performance. Each cable connection can be up to 4.5 meters long,  
yielding a total cable distance of 72 meters.  
1394 End devices. IEEE 1394 interfaces have already been incorporated into a  
variety of devices, including PC cameras, DV camcorders, DV recorders, digital  
still cameras, high-speed hard disk drives, CD-ROM drives, DVD-ROM drives,  
DVD-RAM drives, digital TVs, set-top boxes, scanners, and printers.  
3.0 PC System Requirements  
1. A Pentium based PC (recommended) with one free PCI/PCMCIA slot.  
2. Windows 98/SE Windows ME Windows 2000 and Windows XP.  
3. Any 1394 device that complies with either the 1394-1995 or 1394.a specification  
and does not use more than 1.5 A.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.0 Technical Information  
Output 1394 R/A flat connector X3  
Operating System Windows 98 SE, Windows ME, or Windows 2000, XP and Mac  
O.S  
Serial Bus 3-port PHY layer connector and interface  
400 Mbps max transfer rate (50 MB/sec max)  
63 (4-pin or 6-pin) computer and consumer device connections  
Protocol Asynchronous and isochronous data transfer supported  
Real-time critical applications (digital video) supported  
Non real-time applications (printers, scanners) supported  
5.0 Hardware Installation  
To install the 1394 adapter, follow this procedure.  
1. Make sure the computer is turned off.  
2. Gain access to the interior of the PC/Notebook.  
3. Insert the 1394 adapter in an empty PCI slot or PCMCIA slot.  
4. Press the adapter gently but firmly into the slot and check to see that all contacts  
are fully seated in the connector.  
5. Attach the bracket screws that secure the card to the chassis.  
6. Reinstall the covers on the PC.  
6.0 Software Installation  
Windows XP  
When you plug the adapter into to your system, Windows XP will detect the addition of  
new hardware and install files that it need. After few moments, the hardware can be  
used. You can check your 1394 adapter from “StartMy Computer (Click Mouse  
right button) PropertiesHardwareDevice Manager”.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows 2000  
When you plug the adapter into to your system, Windows 2000 will detect the addition  
of new hardware and install files that it need. After few moments, the hardware can be  
used. You can check your 1394 adapter from “StartMy Computer (Click Mouse  
right button) PropertiesHardwareDevice Manager”.  
Windows Millennium  
When you plug the adapter into to your system, Windows Millennium will detect the  
addition of new hardware and install files that it need. It will restart the computer and  
after rebooting, the hardware can be used. You can check your 1394 adapter from  
StartMy Computer (Click Mouse right button) PropertiesDevice Manager”.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows 98/SE  
1. Windows 98/SE will detect the  
addition of new hardware and  
display the following message:  
2. Click Next. Windows will then  
begin searching for a driver. The  
following message will be  
displayed:  
3. Insert your Windows 98/SE  
installation CD into your CD-ROM  
drive. Select “CD-ROM drive” and  
click Next.  
4. Windows will search the CD for  
the appropriate driver and list what  
it finds. After it has identified the  
appropriate driver, click “Next” to  
begin installation of the driver.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. When the dialogue box below  
appears onscreen, the  
6. After rebooting, click on the  
Device Manager tab in System  
Properties, which you access  
from the Windows Control Panel.  
You should see an entry for the  
driver you installed under the  
1394 Bus Controller item. If the  
driver is not listed, please go  
back to Step 1 and reinstall the  
adapter.  
installation is finished. Click  
Finish to complete setup. You  
will be instructed to reboot your  
computer.  
The Windows 98/SE installation CD includes the Agere 1394 OHCI driver, so you do  
not need an installation CD or diskette. After the installation has finished and the  
computer has rebooted, you may connect 1394/FireWire devices to it.  
The first time you hot-plug a 1394 device into one of the host adapter ports, you will be  
asked to insert your Windows 98/SE installation CD. However, you won’t need to  
insert the CD to add additional 1394 devices; they should automatically appear in the  
Device Manager after they are connected.  
7.0 How to use the Adapter  
This chapter covers a few points on how to use the adapter once it is installed in your  
computer system.  
Connecting Devices  
There are two ways to connect 1394/FireWire devices to the host adapter. Devices  
can connect in serial in a “daisy chain” or through a repeater connected to one of the  
adapter ports.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1394 Cabling  
The 1394 standard has a maximum connection cable length of 4.5 meters (15 feet).  
This means this is the maximum distance between devices.  
If you need to connect two devices more than 4.5 meters apart, you can use a  
repeater to extend the cable length between the devices.  
Cable Types  
There are two types of 1394/FireWire cable. One type, 6-pin to 6-pin, supplies power  
to the device it connects to. The other type is 6-pin to 4-pin, for devices that are  
self-powered and do not require power from the 1394/FireWire bus.  
If you connect devices in a daisy chain and any device needs power from the cabling,  
all cabling must be 6-pin to 6-pin. If you use a repeater, you can use either type.  
Power Considerations  
The 1394/FireWire bus provides limited electrical power through the connector cables,  
as noted above. Some devices will have their own power supplies. Other devices may  
need more power than is available from the bus and can be powered from a powered  
repeater.  
Make sure to check the power requirements of any devices you plan to use before you  
connect them. Consult the device documentation for this information and the  
connection instructions.  
8.0 Troubleshooting  
1. Q: Why the 1394 adapter can’t be detected?  
A: Insert the 1394 adapter firmly into the PCI/PCMCIA slot.  
2. Q: Why the 1394 adapter has not been installed correctly?  
A: IEEE 1394 is only fully supported in Windows 98 Second Edition, Windows ME,  
Windows 2000 and Windows XP or later version. Please upgrade your system.  
3. Q: Why the connected IEEE 1394 (Fire Wire) device can’t be detected?  
A: Connect the FireWire cable correctly. Install the driver provided with your  
FireWire device. Also see the instruction manual provided with the device.  
Maybe some software need DirectX 8.1 for the best support for FireWire devices.  
4. Q: Why no image is obtained form the camera in video software?  
A: Connect the FireWire cable correctly to the camera and the 1394 adapter. Turn  
the camera on before starting your video software. Select the camera in your  
video software and select the necessary settings.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Q: Why no sound is obtained from the camera in video software?  
A: Connect the camera’s sound output to the “LINE-IN” on your sound card.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference,  
and (2) this device must accept any interference  
received, including interference that may cause  
undesired operations.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

Leica Camcorder Accessories FTA360 User Manual
Lenmar Enterprises Car Speaker SPK300K W User Manual
Lenovo Computer Hardware 6393 User Manual
Lexicon Stereo Amplifier MPX G2 User Manual
Lindy Computer Drive 42907 User Manual
Logitech Mouse G400 User Manual
Magnat Audio Car Speaker PRO 1620 User Manual
Makita Cordless Saw XBP01 User Manual
Metra Electronics Computer Drive 99 3009 User Manual
Microsoft Computer Hardware K7S5A User Manual