Lenovo Network Router 8791 User Manual

User Guide  
Types 8009, 8791, 8795, 8799  
Types 8803, 8807, 8812  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
Types 8009, 8791, 8795, 8799  
Types 8803, 8807, 8812  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
Before using this information and the product it supports, be sure to read the “Important safety information” on page v and  
First Edition (June 2006)  
© Copyright Lenovo 2005, 2006.  
Portions © Copyright International Business Machines Corporation 2005.  
All rights reserved.  
U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with  
RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule  
contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is  
unable to accept this Program under these terms, then we provide this Program under the provisions set forth in  
Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in  
Data-General, FAR 52.227.14 (Alternate III).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
Important safety information  
Note  
Please read the following important safety information first.  
This information can help you safely use your desktop or notebook personal  
computer. Follow and retain all information included with your computer. The  
information in this document does not alter the terms of your purchase agreement  
or the LenovoStatement of Limited Warranty. For more information, refer to the  
warranty and safety information that is provided with your computer.  
Customer safety is important. Our products are developed to be safe and effective.  
However, personal computers are electronic devices. Power cords, power adapters,  
and other features can create potential safety risks that can result in physical injury  
or property damage, especially if misused. To reduce these risks, follow the  
instructions included with your product, observe all warnings on the product and  
in the operating instructions, and review the information included in this  
document carefully. By carefully following the information contained in this  
document and provided with your product, you can help protect yourself from  
hazards and create a safer computer work environment.  
Note: This information includes references to power adapters and batteries. In  
addition to notebook computers, some products (such as speakers and  
monitors) ship with external power adapters. If you have such a product,  
this information applies to your product. In addition, your computer  
product contains a coin-sized internal battery that provides power to your  
system clock even when the machine is unplugged, so the battery safety  
information applies to all computers.  
Conditions that require immediate action  
Products can become damaged due to misuse or neglect. Some product damage  
is serious enough that the product should not be used again until it has been  
inspected and, if necessary, repaired by an authorized servicer.  
As with any electronic device, pay close attention to the product when it is  
turned on. On very rare occasions, you might notice an odor or see a puff of  
smoke or sparks vent from your machine. Or you might hear sounds like  
popping, cracking, or hissing. These conditions might merely mean that an  
internal electronic component has failed in a safe and controlled manner. Or,  
they might indicate a potential safety issue. However, do not take risks or  
attempt to diagnose the situation yourself. Contact the Customer Support Center  
for further guidance. For a list of Service and Support phone numbers, refer to  
the warranty and safety information that is provided with your computer.  
Frequently inspect your computer and its components for damage, wear, or signs  
of danger. If you have any questions about the condition of a component, do not  
use the product. Contact the Customer Support Center or the product  
manufacturer for instructions on how to inspect the product and have it  
repaired, if necessary.  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v
 
In the unlikely event that you notice any of the following conditions, or if you  
have any safety concerns with your product, stop using the product and unplug  
it from the power source and telecommunication lines until you can speak to the  
Customer Support Center for further guidance.  
v Power cords, plugs, power adapters, extension cords, surge protectors, or power  
supplies that are cracked, broken, or damaged.  
v Signs of overheating, smoke, sparks, or fire.  
v Damage to a battery (such as cracks, dents, creases), discharge from a battery, or  
a buildup of foreign substances on the battery.  
v A cracking, hissing, or popping sound, or strong odor that comes from the  
product.  
v Signs that liquid has been spilled or an object has fallen onto the computer  
product, power cord, or power adapter.  
v The computer product, power cord, or power adapter has been exposed to  
water.  
v The product has been dropped or damaged in any way.  
v The product does not operate normally when you follow the operating  
instructions.  
Note: If you notice these conditions with a product (such as an extension cord)  
that is not manufactured for or by Lenovo, stop using that product until you  
can contact the product manufacturer for further instructions, or until you  
get a suitable replacement.  
General safety guidelines  
Always observe the following precautions to reduce the risk of injury and property  
damage.  
Service  
Do not attempt to service a product yourself unless instructed to do so by the  
Customer Support Center or your documentation. Only use a service provider who  
is approved to repair your particular product.  
Note: Some computer parts can be upgraded or replaced by the customer. These  
parts are referred to as Customer Replaceable Units, or CRUs. Lenovo  
expressly identifies CRUs as such, and provides documentation with  
instructions when it is appropriate for customers to replace those parts. You  
must closely follow all instructions when performing such replacements.  
Always make sure that the power is turned off and that the product is  
unplugged from any power source before you attempt the replacement. For  
more information on CRUs, refer to the warranty and safety information  
that is provided with your computer. If you have any questions or concerns,  
contact the Customer Support Center.  
Although there are no moving parts in your computer after the power cord has  
been disconnected, the following warnings are required for proper UL certification.  
vi User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Danger  
Hazardous moving parts. Keep fingers and other body parts away.  
Attention  
Before replacing any CRUs, turn off the computer and wait three to five  
minutes to let the computer cool before opening the cover.  
Power cords and power adapters  
Use only the power cords and power adapters supplied by the product  
manufacturer.  
The power cords shall be safety approved. For Germany, it shall be H05VV-F, 3G,  
0.75 mm2, or better. For other countries, the suitable types shall be used  
accordingly.  
Never wrap a power cord around the power adapter or other object. Doing so can  
stress the cord in ways that can cause the cord to fray, crack, or crimp. This can  
present a safety hazard.  
Always route power cords so that they will not be walked on, tripped over, or  
pinched by objects.  
Protect the power cords and power adapters from liquids. For instance, do not  
leave your power cord or power adapter near sinks, tubs, toilets, or on floors that  
are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if  
the power cord or power adapter have been stressed by misuse. Liquids can also  
cause gradual corrosion of the power cord terminals and/or the connector  
terminals on the power adapters which can eventually result in overheating.  
Always connect power cords and signal cables in the correct order and ensure that  
all power cord connectors are securely and completely plugged into receptacles.  
Do not use any power adapter that shows corrosion at the ac input pins and/or  
shows signs of overheating (such as deformed plastic) at the ac input or anywhere  
on the power adapter.  
Do not use any power cords where the electrical contacts on either end show signs  
of corrosion or overheating or where the power cord appears to have been  
damaged in any way.  
Important safety information vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Extension cords and related devices  
Ensure that extension cords, surge protectors, uninterruptible power supplies, and  
power strips that you use are rated to handle the electrical requirements of the  
product. Never overload these devices. If power strips are used, the load should  
not exceed the power strip input rating. Consult an electrician for more  
information if you have questions about power loads, power requirements, and  
input ratings.  
Plugs and outlets  
If a receptacle (power outlet) that you intend to use with your computer  
equipment appears to be damaged or corroded, do not use the outlet until it is  
replaced by a qualified electrician.  
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer  
to obtain a replacement.  
Some products are equipped with a three-pronged plug. This plug fits only into a  
grounded electrical outlet. This is a safety feature. Do not defeat this safety feature  
by trying to insert it into a non-grounded outlet. If you cannot insert the plug into  
the outlet, contact an electrician for an approved outlet adapter or to replace the  
outlet with one that enables this safety feature. Never overload an electrical outlet.  
The overall system load should not exceed 80 percent of the branch circuit rating.  
Consult an electrician for more information if you have questions about power  
loads and branch circuit ratings.  
Be sure that the power outlet you are using is properly wired, easily accessible,  
and located close to the equipment. Do not fully extend power cords in a way that  
will stress the cords.  
Carefully connect and disconnect the equipment from the electrical outlet.  
Batteries  
All personal computers manufactured by Lenovo contain a non-rechargeable coin  
cell battery to provide power to the system clock. In addition, many mobile  
products, such as notebook computers, utilize a rechargeable battery pack to  
provide system power when in portable mode. Batteries supplied by Lenovo for  
use with your product have been tested for compatibility and should only be  
replaced with approved parts.  
Never attempt to open or service any battery. Do not crush, puncture, or incinerate  
batteries or short circuit the metal contacts. Do not expose the battery to water or  
other liquids. Only recharge the battery pack strictly according to instructions  
included in the product documentation.  
Battery abuse or mishandling can cause the battery to overheat, which can cause  
gasses or flame to “vent” from the battery pack or coin cell. If your battery is  
damaged, or if you notice any discharge from your battery or the buildup of  
foreign materials on the battery leads, stop using the battery and obtain a  
replacement from the battery manufacturer.  
Batteries can degrade when they are left unused for long periods of time. For some  
rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused  
in a discharged state could increase the risk of a battery short circuit, which could  
viii User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
shorten the life of the battery and can also pose a safety hazard. Do not let  
rechargeable Lithium-Ion batteries completely discharge or store these batteries in a  
discharged state.  
Heat and product ventilation  
Computers generate heat when turned on and when batteries are charging.  
Notebook computers can generate a significant amount of heat due to their  
compact size. Always follow these basic precautions:  
v Do not leave the base of your notebook computer in contact with your lap or  
any part of your body for an extended period when the computer is functioning  
or when the battery is charging. Your computer produces some heat during  
normal operation. Extended contact with the body could cause discomfort or,  
potentially, a skin burn.  
v Do not operate your computer or charge the battery near flammable materials or  
in explosive environments.  
v Ventilation slots, fans and/or heat sinks are provided with the product for safety,  
comfort, and reliable operation. These features might inadvertently become  
blocked by placing the product on a bed, sofa, carpet, or other flexible surface.  
Never block, cover or disable these features.  
You should inspect your desktop computer for dust accumulation at least once  
every three months. Before inspecting your computer, turn off the power and  
unplug the computer’s power cord from the electrical outlet; then remove any dust  
from vents and perforations in the bezel. If you notice external dust accumulation,  
you should also examine and remove dust from the inside of the computer  
including heat sink inlet fins, power supply vents, and fans. Always turn off and  
unplug the computer before opening the cover. If possible, avoid operating your  
computer within 2 feet of high-traffic areas. If you must operate your computer in  
or near a high-traffic area, you should inspect and, if necessary, clean your  
computer more frequently.  
For your safety and to maintain optimum computer performance, always follow  
these basic precautions with your desktop computer:  
v Keep the cover closed whenever the computer is plugged in.  
v Regularly inspect the outside of the computer for dust accumulation.  
v Remove dust from vents and any perforations in the bezel. More frequent  
cleanings might be required for computers in dusty or high-traffic areas.  
v Do not restrict or block any ventilation openings.  
v Do not store or operate your computer inside furniture, as this might increase  
the risk of overheating.  
v Airflow temperatures into the computer should not exceed 35° C (95° F).  
v Do not use non-desktop air filtration devices.  
CD and DVD drive safety  
CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or  
otherwise physically damaged, it is possible for the disc to break apart or even  
shatter when the CD and DVD drives are in use. To protect against possible injury  
due to this situation, and to reduce the risk of damage to your machine, do the  
following:  
v Always store CD and DVD discs in their original packaging.  
v Always store CD and DVD discs out of direct sunlight and away from direct  
heat sources.  
Important safety information ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v Remove CD and DVD discs from the computer when not in use.  
v Do not bend or flex CD and DVD discs, or force them into the computer or their  
packaging.  
v Check CD and DVD discs for cracks before each use. Do not use cracked or  
damaged discs.  
Additional safety information  
Danger  
Electrical current from power, telephone, and communication cables is  
hazardous.  
To avoid a shock hazard:  
v Do not connect or disconnect any cables or perform installation, maintenance,  
or reconfiguration of this product during an electrical storm.  
v Connect all power cords to a properly wired and grounded electrical outlet.  
v Connect to properly wired outlets any equipment that will be attached to this  
product.  
v When possible, use one hand only to connect or disconnect signal cables.  
v Never turn on any equipment when there is evidence of fire, water, or  
structural damage.  
v Disconnect the attached power cords, telecommunications systems, networks,  
and modems before you open the device covers, unless instructed otherwise  
in the installation and configuration procedures.  
v Connect and disconnect cables as described in the following table when  
installing, moving, or opening covers on this product or attached devices.  
To connect:  
To disconnect:  
1. Turn everything OFF.  
2. First, attach all cables to devices.  
3. Attach signal cables to connectors.  
4. Attach power cords to outlet.  
5. Turn device ON.  
1. Turn everything OFF.  
2. First, remove power cords from outlet.  
3. Remove signal cables from connectors.  
4. Remove all cables from devices.  
Lithium battery notice  
Caution  
Danger of explosion if battery is incorrectly replaced.  
When replacing the lithium coin cell battery, use only the same or an equivalent  
type that is recommended by the manufacturer. The battery contains lithium and  
can explode if not properly used, handled, or disposed of.  
Do not:  
v Throw or immerse into water  
v Heat to more than 100° C (212° F)  
v Repair or disassemble  
x
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dispose of the battery as required by local ordinances or regulations.  
Modem safety information  
Caution  
To reduce the risk of fire, use only No. 26 AWG or larger  
telecommunication line cord.  
To reduce the risk of fire, electrical shock, or injury when using telephone  
equipment, always follow basic safety precautions, such as:  
v Never install telephone wiring during a lightning storm.  
v Never install telephone jacks in wet locations unless the jack is specifically  
designed for wet locations.  
v Never touch uninsulated telephone wires or terminals unless the telephone line  
has been disconnected at the network interface.  
v Use caution when installing or modifying telephone lines.  
v Avoid using a telephone (other than a cordless type) during an electrical storm.  
There may be a remote risk of electric shock from lightning.  
v Do not use the telephone to report a gas leak in the vicinity of the leak.  
Laser compliance statement  
Some personal computer models are equipped from the factory with a CD-ROM  
drive or a DVD-ROM drive. CD-ROM drives and DVD-ROM drives are also sold  
separately as options. CD-ROM drives and DVD-ROM drives are laser products.  
These drives are certified in the U.S. to conform to the requirements of the  
Department of Health and Human Services 21 Code of Federal Regulations (DHHS  
21 CFR) Subchapter J for Class 1 laser products. Elsewhere, these drives are  
certified to conform to the requirements of the International Electrotechnical  
Commission (IEC) 60825-1 and CENELEC EN 60825-1 for Class 1 laser products.  
When a CD-ROM drive or a DVD-ROM drive is installed, note the following  
handling instructions.  
Caution  
Use of controls or adjustments or performance of procedures other than  
those specified herein might result in hazardous radiation exposure.  
Do not remove the drive covers. Removing the covers of the CD-ROM drive or  
DVD-ROM drive could result in exposure to hazardous laser radiation. There are  
no serviceable parts inside the CD-ROM drive or DVD-ROM drive.  
Some CD-ROM drives and DVD-ROM drives contain an embedded Class 3A or  
Class 3B laser diode. Note the following statement.  
Danger  
Laser radiation when open. Do not stare into the beam, do not view  
directly with optical instruments, and avoid direct exposure to the beam.  
Important safety information xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power supply statement  
Never remove the cover on a power supply or any part that has the following  
label attached.  
Hazardous voltage, current, and energy levels are present inside any component  
that has this label attached. There are no serviceable parts inside these components.  
If you suspect a problem with one of these parts, contact a service technician.  
xii User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
This User Guide contains the following information:  
setting up your computer for comfort and the impact of light sources, air  
circulation, and electrical outlets.  
setting up your computer and software and operating system installation.  
v Chapter 3, “Installing options,” on page 11 provides information on the features  
and options that are available for your computer.  
v Chapter 4, “Recovering software,” on page 33 provides instructions on how to  
use the ThinkVantage® Rescue and Recoveryprogram to create product  
recovery disks, back up data, recover software, and restore the entire contents of  
your hard disk to a previously saved state.  
v Chapter 5, “Using the Setup Utility,” on page 41 provides instructions on how to  
view and change the configuration settings of your computer.  
updating POST/BIOS and how to recover from a POST/BIOS update failure.  
about basic troubleshooting and diagnostic tools for your computer.  
information about the wide variety of helpful resources available from Lenovo.  
manually programming your modem.  
v Appendix B, “Notices,” on page 65 provides notices and trademark information.  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xiii  
 
xiv User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1. Arranging your workspace  
To get the most from your computer, arrange both the equipment you use and  
your work area to suit your needs and the kind of work you do. Your comfort is of  
foremost importance, but light sources, air circulation, and the location of electrical  
outlets also can affect the way you arrange your workspace.  
Comfort  
Although no single working position is ideal for everyone, here are a few  
guidelines to help you find a position that suits you best.  
Sitting in the same position for a long time can cause fatigue. A good chair can  
make a big difference. The backrest and seat should adjust independently and  
provide good support. The seat should have a curved front to relieve pressure on  
the thighs. Adjust the seat so that your thighs are parallel to the floor and your  
feet are either flat on the floor or on a footrest.  
When using the keyboard, keep your forearms parallel to the floor and your wrists  
in a neutral, comfortable position. Try to keep a light touch on the keyboard and  
your hands and fingers relaxed. You can change the angle of the keyboard for  
maximum comfort by adjusting the position of the keyboard feet.  
Viewing Distance  
Lower  
Back  
Support  
Seat  
Height  
Adjust the monitor so the top of the screen is at, or slightly below, eye level. Place  
the monitor at a comfortable viewing distance, usually 51 to 61 cm (20 to 24 in.),  
and position it so you can view it without having to twist your body. Also position  
other equipment you use regularly, such as the telephone or a mouse, within easy  
reach.  
Glare and lighting  
Position the monitor to minimize glare and reflections from overhead lights,  
windows, and other light sources. Even reflected light from shiny surfaces can  
cause annoying reflections on your monitor screen. Place the monitor at right  
angles to windows and other light sources, when possible. Reduce overhead  
lighting, if necessary, by turning off lights or using lower wattage bulbs. If you  
install the monitor near a window, use curtains or blinds to block the sunlight. You  
might have to adjust the brightness and contrast controls on the monitor as the  
room lighting changes throughout the day.  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
 
Where it is impossible to avoid reflections or to adjust the lighting, an antiglare  
filter placed over the screen might be helpful. However, these filters might affect  
the clarity of the image on the screen; try them only after you have exhausted  
other methods of reducing glare.  
Dust buildup compounds problems associated with glare. Remember to clean your  
monitor screen periodically using a soft cloth moistened with a nonabrasive liquid  
glass cleaner.  
Air circulation  
Your computer and monitor produce heat. The computer has a fan that pulls in  
fresh air and forces out hot air. The monitor lets hot air escape through vents.  
Blocking the air vents can cause overheating, which might result in a malfunction  
or damage. Place the computer and monitor so that nothing blocks the air vents;  
usually, 51 mm (2 in.) of air space is sufficient. Also, make sure the vented air is  
not blowing on someone else.  
Electrical outlets and cable lengths  
The location of electrical outlets and the length of power cords and cables that  
connect to the monitor, printer, and other devices might determine the final  
placement of your computer.  
When arranging your workspace:  
v Avoid the use of extension cords. When possible, plug the computer power cord  
directly into an electrical outlet.  
v Keep power cords and cables neatly routed away from walkways and other  
areas where they might get kicked accidentally.  
For more information about power cords, see “Power cords and power adapters”  
on page vii and the warranty and safety information that is provided with your  
computer.  
2
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2. Setting up your computer  
Before you begin, make sure you set up your computer in the best possible work  
area that suits your needs and the kind of work you do. For more information,  
Note: Read “Important safety information” on page v before you set up your  
computer. The precautions and guidelines will help you work safely.  
Connecting your computer  
Use the following information when connecting your computer. Look for the small  
connector icons on the back of your computer.  
If your computer cables and connector panel have color-coded connectors, match  
the color of the cable end with the color of the connector. For example, match a  
blue cable end with a blue connector or a red cable end with a red connector.  
Note: Depending on your model type, your computer might not have all of the  
connectors that are described in this section.  
1. The power supply has automatic power detection and set up.  
2. Connect the Universal Serial Bus (USB) keyboard cable to a USB connector.  
Note: Some models will have keyboards with a fingerprint reader. After you  
setup and turn on your computer, refer to the Access Help online help  
system for information about your fingerprint reader. See “Access  
Help” on page 54 for instructions on how to open the online help  
system.  
3. Connect the USB mouse cable to a USB connector.  
4. Connect the monitor cable to the monitor connector on the computer.  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v If you have a Video Graphics Array (VGA) Standard monitor, connect the  
cable to the connector as shown.  
Note: If your model has two monitor connectors, be sure to use the  
connector on the accelerated graphics port (AGP) adapter.  
v If you have a digital video interface (DVI) monitor, connect the cable to the  
connector as shown.  
Note: Your computer must have an adapter installed that supports the DVI  
monitor.  
5. If you have a modem, connect the modem using the following information.  
E
N
O
H
P
E
PHONE  
N
O
H
P
E
IN  
L
E
N
O
H
P
LINE  
LINE  
E
IN  
L
4
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ1ꢁ  
ꢀ2ꢁ  
This illustration shows the two connections on the back of the computer that are  
needed to set up your modem.  
In the United States and other countries or regions that use the RJ-11 telephone  
outlet, attach one end of the telephone cable to the telephone and the other end to  
the telephone connector on the back of the computer. Attach one end of the modem  
cable to the modem connector on the back of the computer and the other end to the  
telephone outlet.  
ꢀ3ꢁ  
In countries or regions that do not use RJ-11 telephone outlets, a splitter or converter  
is required to attach the cables to the telephone outlet, as shown at the top of the  
illustration. You also can use the splitter or converter without the telephone, as  
shown at the bottom of the illustration.  
Chapter 2. Setting up your computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
6. If you have audio devices, attach them using the following instructions. For  
more information about speakers, see steps 7 and 8.  
ꢀ1ꢁ Audio line-in  
ꢀ2ꢁ Audio line-out  
ꢀ3ꢁ Microphone  
ꢀ4ꢁ Headphone  
This connector receives audio signals from an external audio device,  
such as a stereo system.  
This connector sends audio signals from the computer to external  
devices, such as powered stereo speakers.  
Use this connector to attach a microphone to your computer when  
you want to record sound or if you use speech-recognition software.  
Use this connector to attach headphones to your computer when you  
want to listen to music or other sounds without disturbing anyone.  
This connector might be located on the front of the computer.  
7. If you have powered speakers with an ac adapter, use the following  
instructions.  
a. Connect the cable that runs between the speakers, if necessary. On some  
speakers, this cable is permanently attached.  
b. Connect the ac adapter cable to the speaker.  
c. Connect the speakers to the computer.  
d. Connect the ac adapter to the ac power source.  
8. If you have unpowered speakers with no ac adapter, use the following  
instructions.  
a. Connect the cable that runs between the speakers, if necessary. On some  
speakers, this cable is permanently attached.  
6
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
b. Connect the speakers to the computer.  
9. Connect any additional devices that you have. Your computer might not have  
all connectors that are shown.  
1394  
1
3
9
4
ꢀ1ꢁ USB  
Use this connector to attach a device that requires a USB connection,  
such as a keyboard, mouse, scanner, printer, or personal digital  
assistant (PDA).  
ꢀ2ꢁ Serial  
Use this connector to attach an external modem, serial printer, or  
other device that uses a 9-pin serial connector.  
Use this connector to attach a television set that has an S-Video  
connector. This connector is present on some high-performance video  
adapters.  
ꢀ3ꢁ S-video  
ꢀ4ꢁ Parallel  
Use this connector to attach a parallel printer or any other device that  
requires a 25-pin parallel connection.  
ꢀ5ꢁ Ethernet  
Use this connector to attach the computer to an Ethernet-type local  
area network or to a cable modem.  
Important: To operate the computer within FCC limits when it is  
connected to an Ethernet network, use a Category 5 Ethernet cable.  
Use this connector to attach a joystick, gamepad, or a musical  
instrument digital interface (MIDI) device such as a MIDI keyboard.  
This connector is sometimes called Firewire because it transmits data  
rapidly. There are two types of IEEE 1394 connectors: the 4-pin and  
the 6-pin. IEEE 1394 offers connection to several types of consumer  
electronics, including digital audio devices and scanners.  
ꢀ6ꢁ MIDI/joystick  
ꢀ7ꢁ IEEE 1394  
10. Connect the power cords to properly grounded electrical outlets.  
Chapter 2. Setting up your computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Note: Refer to the Access Help online help system for more information about  
connectors. See “Access Help” on page 54 for instructions on how to open  
the online help system.  
Turning on power  
Turn on the monitor and other external devices first, and then turn on the  
computer. When the power-on self-test (POST) is finished, the logo window closes.  
If your computer has preinstalled software, the software installation program  
starts.  
If you experience any problems during startup, see Chapter 7, “Troubleshooting  
information, help, and service,” on page 53. You can get help and information by  
telephone through the Customer Support Center. Refer to the warranty and safety  
information that is provided with your computer for the Service and Support  
worldwide telephone list.  
Finishing the software installation  
Important  
Read the license agreements carefully before using the programs on this  
computer. These agreements detail your rights, obligations, and warranties for  
the software on this computer. By using these programs, you accept the terms  
of the agreements. If you do not accept the agreements, do not use the  
programs. Instead, promptly return the entire computer for a full refund.  
After you start the computer for the first time, follow the instructions on the screen  
to complete the software installation. If you do not complete the software  
installation the first time the computer is turned on, unpredictable results might  
occur. When the installation is complete, refer to the Access Help online help  
system to learn more about your computer. See “Access Help” on page 54 for  
instructions on how to open the online help system.  
Note: Some models might have a multilingual version of Microsoft® Windows® XP  
Pro preinstalled. If your computer has the multilingual version, you will be  
prompted to choose a language during the initial installation process. After  
installation, the language version can be changed through the Windows  
Control Panel.  
Completing important tasks  
After you have set up your computer, perform the following tasks, which will save  
you time and trouble later:  
v Create a diagnostic CD image or diagnostic diskettes. Diagnostic programs are  
used to test hardware components of your computer and report  
operating-system-controlled settings that can cause hardware failures. Making a  
diagnostic CD image or diagnostic diskettes ahead of time assures that you will  
be able to run diagnostics if the Recovery and Recovery workspace becomes  
inaccessible. For more information, see “PC-Doctor for DOS” on page 49.  
8
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v Record your computer machine type, model, and serial number. If you need  
service or technical support, you will probably be asked for this information. For  
further information, see the warranty and safety information that is provided  
with your computer.  
Updating your operating system  
Microsoft makes updates available for various operating systems through the  
Microsoft Windows Update Web site. The Web site automatically determines what  
Windows updates are available for your specific computer and lists those updates  
only. Updates could include security fixes, new versions of Windows components  
(such as media player), fixes to other portions of the Windows operating system,  
or enhancements.  
Refer to the Access Help online help system for more information about updating  
your operating system. See “Access Help” on page 54 for instructions on how to  
open the online help system.  
Installing other operating systems  
If you install your own operating system, follow the instructions that come with  
your operating system CDs or diskettes. Remember to install all device drivers  
after you install your operating system. Installation instructions are usually  
provided with the device drivers.  
Updating your antivirus software  
Your computer comes with the Symantec Client Security software you can use to  
detect and eliminate viruses. You should run the LiveUpdate application to get the  
latest updates from the Symantec Client Security Web site. LiveUpdate will  
download the latest virus list and Symantec Client Security will use the new list  
when it scans your computer the next time.  
Refer to the Access Help online help system for more information about updating  
your antivirus software. See “Access Help” on page 54 for instructions on how to  
open the online help system.  
Shutting down the computer  
When you are ready to turn off your computer, always follow the shutdown  
procedure for your operating system. This prevents the loss of unsaved data or  
damage to your software programs. To shut down the Microsoft Windows  
operating system click Shut Down from the Start menu. Select Shut Down from  
the drop down menu and click OK.  
Chapter 2. Setting up your computer  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Installing options  
This chapter provides an introduction to the features and options that are available  
for your computer. You can expand the capabilities of your computer by adding  
memory or adapters. When installing an option, use these instructions along with  
the instructions that come with the option.  
Note: Use only parts provided by Lenovo.  
Important  
Before you install or remove any option, read “Important safety information”  
on page v. These precautions and guidelines will help you work safely.  
Features  
This section provides an overview of the computer features and preinstalled  
software.  
System information  
The following information covers a variety of models. For information for  
your specific model, use the Setup Utility. See Chapter 5, “Using the Setup  
Microprocessor (varies by model)  
v Intel® Pentium® 4 processor with HyperThreading Technology  
v Intel Pentium D processor  
v Intel Celeron® D processor  
v Intel Core2 Duo processor  
v Internal cache (size varies by model)  
Memory  
v Support for two double data rate 2 (DDR2) dual inline memory modules  
(DIMMs)  
Internal drives  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
v Internal hard disk drive  
v Optical drive (some models)  
Video subsystem  
v An integrated graphics controller for a Video Graphics Array (VGA) monitor  
Audio subsystem  
v HD with ADI 1983HD Audio Codec  
v Line in and line out connectors on the rear panel  
v Microphone and headphone connectors on the front panel  
v Mono internal speaker (some models)  
Connectivity  
v 10/100/1000 Mbps integrated Broadcom Ethernet controller that supports the  
Wake on LAN® feature (some models)  
v Soft modem V.90/V.44 (some models)  
System management features  
v Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP)  
v Wake on LAN  
v Wake on Ring (in the Setup Utility program, this feature is called Serial Port  
Ring Detect for an external modem)  
v Remote Administration  
v Automatic power-on startup  
v System Management (SM) BIOS and SM software  
v Ability to store Power on self-test (POST) hardware test results  
Input/output features  
v 25-pin, Extended Capabilities Port (ECP)/Extended Parallel Port (EPP)  
v 9-pin serial connector  
v Eight 4-pin, USB connectors (two on front panel and six on rear panel)  
v Ethernet connector  
v VGA monitor connector  
v Four audio connectors (headphone and microphone on front panel and line in  
and line out on rear panel)  
Expansion  
v Two drive bays  
v One 32-bit peripheral component interconnect (PCI) adapter connector  
Power  
v Automatic 50/60 Hz input frequency switching  
v Advanced Power Management support  
v Advanced Configuration and Power Interface (ACPI) support  
12 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Security features  
v Keyboard with fingerprint reader (some models, see the Access Help online help  
system for information)  
v User and administrator passwords for BIOS access  
v Support for the addition of an integrated cable lock (Kensington lock) to secure  
the cover  
v Startup sequence control  
v Startup without diskette drive, keyboard, or mouse  
v Unattended start mode  
v Hard disk I/O control  
v Serial and parallel port I/O control  
v Security profile by device  
v Cover presence switch (some models)  
Preinstalled software  
v Your computer might come with preinstalled software. If it does, an operating  
system, device drivers to support built-in features, and other support programs  
are included.  
Operating systems, preinstalled (varies by model type)  
Note: Not all countries or regions will have these operating systems.  
v Microsoft Windows XP Home Edition  
v Microsoft Windows XP Professional  
Operating systems certified or tested for compatibility1  
v Microsoft Windows 2000  
v Linux®  
1. The operating systems listed here are being certified or tested for compatibility at the time this publication goes to press.  
Additional operating systems might be identified by Lenovo as compatible with your computer following the publication of this  
booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been certified or  
tested for compatibility, check the Web site of the operating system vendor.  
Chapter 3. Installing options 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
This section lists the physical specifications for your computer.  
Dimensions  
Height: 89 mm (3.5 in.)  
Width: 276 mm (10.9 in.)  
Depth: 273 mm (10.7 in)  
Weight  
Minimum configuration as shipped: 6.3 kg (13.4 lb)  
Maximum configuration: 6.4 kg (14.1 lb)  
Environment  
Air temperature:  
Operating at 0 - 3000 ft (914.4 m): 10° to 35°C (50° to 95°F)  
Operating at 3000 ft - 6562 ft (2000 m): 10° to 32°C (50° to 89.6°F)  
Non-operating: 10° to 43°C (50° to 110°F)  
Humidity:  
Operating: 8% to 80%  
Non-operating: 8% to 80%  
Transit: 8% to 90%  
Maximum altitude: 2000 m (6562 ft)  
Electrical input  
Input voltage:  
Low range:  
Minimum: 100 V ac  
Maximum: 127 V ac  
Input frequency range: 50/60 Hz  
High range:  
Minimum: 200 V ac  
Maximum: 240 V ac  
Input frequency range: 50/60 Hz  
Input kilovolt-amperes (kVA) (approximate):  
Minimum configuration as shipped: 0.09 kVA  
Maximum configuration: 0.23 kVA  
Available options  
The following are some available options:  
v External options  
– Parallel port devices, such as printers and external drives  
– Serial port devices, such as external modems and digital cameras  
– Audio devices, such as external speakers for the sound system  
– USB devices, such as printers, joysticks, and scanners  
– Security device, such as an integrated cable lock  
– Monitors  
v Internal options  
– System memory, called dual inline memory modules (DIMMs)  
14 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
– Peripheral component interconnect (PCI) adapters  
– Optical drives, such as CD drives and DVD drives (some models)  
For the latest information about available options, see the Lenovo Web site at  
Supported operating positions  
You can position your computer in one of the positions shown in the following  
illustration.  
Handling static-sensitive devices  
Static electricity, although harmless to you, can seriously damage computer  
components and options.  
When you add an option, do not open the static-protective package containing the  
option until you are instructed to do so.  
When you handle options and other computer components, take these precautions  
to avoid static electricity damage:  
v Limit your movement. Movement can cause static electricity to build up around  
you.  
v Always handle components carefully. Handle adapters and memory modules by  
the edges. Never touch any exposed circuitry.  
v Prevent others from touching components.  
v When you install a new option, touch the static-protective package containing  
the option to a metal expansion-slot cover or other unpainted metal surface on  
the computer for at least two seconds. This reduces static electricity in the  
package and your body.  
v When possible, remove the option and install it directly in the computer without  
setting the option down. When this is not possible, place the static-protective  
package that the option came in on a smooth, level surface and place the option  
on it.  
Chapter 3. Installing options 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v Do not place the option on the computer cover or other metal surface.  
Installing external options  
This section shows the various external connectors on your computer to which you  
can attach external options, such as external speakers, a printer, or a scanner. For  
some external options, you must install additional software in addition to making  
the physical connection. When adding an external option, use the information in  
this section to identify the required connector, and then use the instructions that  
come with the option to help you make the connection and install any software or  
device drivers that are required for the option.  
Locating the connectors on the front of your computer  
The following illustration shows the locations of the connectors on the front of the  
computer.  
ꢀ1ꢁHeadphone connector  
ꢀ3ꢁUSB connector  
ꢀ2ꢁMicrophone connector  
ꢀ4ꢁUSB connector  
16 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Locating the connectors on the rear of your computer  
The following illustration shows the locations of the connectors on the rear of the  
computer.  
ꢀ1ꢁPCI adapter connector  
ꢀ2ꢁIntegrated cable lock  
ꢀ3ꢁUSB connector  
ꢀ8ꢁEthernet connector  
ꢀ9ꢁUSB connectors  
ꢀ10ꢁUSB connectors  
ꢀ4ꢁUSB connector  
ꢀ11ꢁAudio line out connector  
ꢀ12ꢁAudio line in connector  
ꢀ13ꢁDiagnostic LEDs  
ꢀ5ꢁVGA monitor connector  
ꢀ6ꢁParallel connector  
ꢀ7ꢁSerial connector  
ꢀ14ꢁPower cord connector  
Note: Some connectors on the rear of the computer are color-coded to help you  
determine where to connect the cables on your computer.  
Chapter 3. Installing options 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connector  
Description  
USB connectors  
Used to attach a device that requires a Universal Serial Bus  
(USB) connection, such as a USB mouse, USB keyboard, USB  
scanner, or USB printer. If you have more than eight USB  
devices, you can purchase a USB hub, which you can use to  
connect additional USB devices.  
Parallel connector  
Serial connector  
Used to attach a parallel printer, parallel scanner, or other  
devices that use a 25-pin parallel connector.  
Used to attach an external modem, serial printer, or other  
devices that use a 9-pin serial connector.  
Ethernet connector  
Used to attach an Ethernet cable for a local area network  
(LAN).  
Note: To operate the computer within FCC Class B limits, use  
a Category 5 Ethernet cable.  
Audio line out connector  
Audio line in connector  
Used to send audio signals from the computer to external  
devices, such as powered stereo speakers (speakers with  
built-in amplifiers), headphones, multimedia keyboards, or the  
audio line in connector on a stereo system or other external  
recording device.  
Used to receive audio signals from an external audio device,  
such as a stereo system. When you attach an external audio  
device, a cable is connected between the audio line out  
connector of the device and the audio line in connector of the  
computer.  
Obtaining device drivers  
You can obtain device drivers for operating systems that are not preinstalled at  
instructions are provided in README files with the device driver files.  
18 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Opening the cover  
Important:  
static-sensitive devices” on page 15 before opening the computer cover.  
To open the computer cover:  
1. Remove any media (DVDs, CDs, or tapes) from the drives, shut down your  
operating system, and turn off all attached devices and the computer.  
2. Unplug all power cords from electrical outlets.  
3. Disconnect all cables attached to the computer. This includes power cords,  
input/output (I/O) cables, and any other cables that are connected to the  
computer.  
4. Remove any locking devices such as a cable lock that secure the cover.  
5. Press the buttons on the sides of the computer and pivot the cover upward to  
open the computer as shown.  
Chapter 3. Installing options 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Locating components  
The following illustration will help you locate the various components in your  
computer.  
ꢀ1ꢁPCI riser  
ꢀ6ꢁSystem fan  
ꢀ2ꢁPower supply assembly  
ꢀ3ꢁOptical drive eject button  
ꢀ4ꢁOptical drive  
ꢀ7ꢁInternal speaker  
ꢀ8ꢁCable clip  
ꢀ9ꢁRear fan bracket assembly  
ꢀ5ꢁHard disk drive  
Identifying parts on the system board  
The system board (sometimes called the planar or motherboard) is the main circuit  
board in your computer. It provides basic computer functions and supports a  
variety of devices that are factory-installed or that you can install later.  
20 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The following illustration shows the locations of parts on the system board.  
ꢀ1ꢁBattery  
ꢀ10ꢁInternal speaker connector  
ꢀ11ꢁMemory connector 1  
ꢀ12ꢁMemory connector 2  
ꢀ13ꢁMicroprocessor fan connector  
ꢀ14ꢁClear CMOS/Recovery jumper  
ꢀ15ꢁTemperature sensor connector  
ꢀ16ꢁSystem fan connector  
ꢀ2ꢁSATA connector (hard drive cable)  
ꢀ3ꢁOptical drive connector  
ꢀ4ꢁPCI riser connector  
ꢀ5ꢁFront panel connector  
ꢀ6ꢁ12v power connector  
ꢀ7ꢁPower connector  
ꢀ8ꢁFront fan connector  
ꢀ9ꢁMicroprocessor  
ꢀ17ꢁCover presence switch  
Installing memory  
Your computer has two connectors for installing double date rate 2 dual inline  
memory modules (DDR2 DIMMs) that provide up to a maximum of 4.0 GB of  
system memory.  
When installing memory modules, the following rules apply:  
v Use 1.8 V, 240-pin, double data rate 2 synchronous dynamic random access  
memory (DDR2 SDRAM).  
v Use 256 MB, 512 MB, 1.0 GB, or 2.0 GB memory modules in any combination up  
to a maximum of 4.0 GB.  
Note: Only DDR2 SDRAM memory modules can be used.  
Chapter 3. Installing options 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To install a memory module:  
1. Open the computer cover. See “Opening the cover” on page 19.  
2. Pivot the drive bay assembly upward to gain access to the system board.  
3. Locate the memory connectors. See “Identifying parts on the system board” on  
4. Open the retaining clips.  
5. Make sure that the notch ꢀ1ꢁ on the memory module aligns correctly with the  
connector key ꢀ2ꢁ on the system board. Push the memory module straight  
down into the connector until the retaining clips close.  
22 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to do next:  
v To work with another option, go to the appropriate section.  
v To complete the installation, go to “Closing the cover and connecting the  
Installing a PCI adapter  
This section provides information and instructions for installing a PCI adapter.  
Your computer has a riser card with one PCI expansion connector.  
To install an adapter:  
1. Open the computer cover. See “Opening the cover” on page 19.  
2. Pivot the drive bay assembly upward to gain access to the system board.  
3. Locate the cable clip. See “Locating components” on page 20.  
4. Remove all cables from the cable clip.  
Chapter 3. Installing options 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. Pull upward on the blue handle provided to remove the PCI riser from the  
computer.  
6. Pivot the adapter latch ꢀ1ꢁ upward then remove the cover for the expansion  
connector.  
7. Remove the adapter from its static-protective package.  
8. Install the adapter into the expansion connector in the PCI riser.  
9. Pivot the adapter latch ꢀ1ꢁ down to retain the adapter.  
10. Reinstall the PCI riser and the adapter.  
What to do next:  
v To work with another option, go to the appropriate section.  
v To complete the installation, go to “Closing the cover and connecting the  
24 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing an optical drive  
This section provides information and instructions for installing optical drives. You  
can install an optical drive to read other types of media, such as CD drives and  
DVD drives.  
Note: These different drives are also referred to as integrated drive electronics  
(IDE) drives.  
When you install an optical drive, it is important to note the type of drive that you  
are installing.  
To install an optical drive, do the following:  
1. Open the computer cover. See “Opening the cover” on page 19.  
2. Push the optical drive eject button. See “Locating components” on page 20.  
3. Pull the eject bar.  
Chapter 3. Installing options 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Slide the optical drive out of the front of the computer.  
6. Slide the optical drive in the front of the computer until it is locked into  
position.  
26 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to do next:  
v To work with another option, go to the appropriate section.  
v To complete the installation, go to “Closing the cover and connecting the  
Security features  
To help prevent hardware theft and unauthorized access to your computer, several  
security options are available. In addition to a physical lock, unauthorized use of  
your computer can be prevented by a software lock that locks the keyboard until a  
correct password is typed in.  
Make sure that any security cables you install do not interfere with other computer  
cables.  
Integrated cable lock  
With an integrated cable lock (sometimes referred to as a Kensington lock), you  
can secure your computer to a desk, table, or other non-permanent fixture. The  
cable lock attaches to a security slot at the rear of your computer and is operated  
with a key. The cable lock also locks the buttons used to open the cover. This is the  
same type of lock used with many laptop computers. You can order a cable lock  
Kensington.  
Chapter 3. Installing options 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Password protection  
To deter unauthorized use of your computer, you can use the Setup Utility  
program to set a password. When you turn on your computer you are prompted to  
type the password to unlock the keyboard for normal use. For more information,  
What to do next:  
v To work with another option, go to the appropriate section.  
v To complete the installation, go to “Closing the cover and connecting the  
Changing the battery  
Your computer has a special type of memory that maintains the date, time, and  
settings for built-in features, such as parallel-port assignments (configuration). A  
battery keeps this information active when you turn off the computer.  
The battery normally requires no charging or maintenance throughout its life;  
however, no battery lasts forever. If the battery fails, the date, time, and  
configuration information (including passwords) are lost. An error message is  
displayed when you turn on the computer.  
Refer to “Lithium battery notice” on page x for information about replacing and  
disposing of the battery.  
To change the battery:  
1. Open the computer cover. See “Opening the cover” on page 19.  
2. Pivot the drive bay assembly upward to gain access to the system board.  
28 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Locate the PCI riser. See “Locating components” on page 20.  
4. Remove the PCI riser to gain access to the battery. See “Installing a PCI  
6. Remove the old battery using the following illustration.  
7. Install the new battery using the following illustration.  
8. Reinstall the PCI riser.  
9. Close the computer cover, and plug in the power cord. See “Closing the cover  
Note: When the computer is turned on for the first time after you replace the  
battery, an error message might be displayed. This is normal after  
replacing the battery.  
10. Turn on the computer and all attached devices.  
11. Use the Setup Utility program to set the date and time and any passwords.  
Chapter 3. Installing options 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erasing a lost or forgotten password (clearing CMOS)  
This section applies to lost or forgotten passwords. For more information about  
lost or forgotten passwords, see the ThinkVantage Productivity Center program on  
your desktop.  
Note: If you are enrolled in the Hardware Password Reset program, refer to  
“Using passwords” on page 41 to reset your password. If you do clear  
CMOS or restore Setup Utility defaults, you will have to re-enroll in the  
Hardware Password Reset program.  
To erase a forgotten password:  
1. Turn off the computer and any attached devices, such as printers, monitors,  
and external drives.  
2. Unplug all power cords from electrical outlets, and open the computer cover.  
3. Pivot the drive bay assembly upward to gain access to the system board.  
4. Locate the Clear CMOS/Recovery jumper on the system board. See  
5. Move the jumper from the standard position (pins 1 and 2) to the  
maintenance or configure position (pins 2 and 3).  
6. Close the computer cover and connect the power cord. See “Closing the cover  
7. Restart the computer, leave it on for approximately 10 seconds. Turn off the  
computer by holding the power switch for approximately 5 seconds. The  
computer will turn off.  
8. Repeat steps 2 through 4 on page 30.  
9. Move the jumper back to the standard (pins 1 and 2).  
10. Close the computer cover and connect the power cord. See “Closing the cover  
30 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Closing the cover and connecting the cables  
After working with options, you need to install any removed parts, close the  
computer cover, and reconnect any cables, including telephone lines and power  
cords. Also, depending on the option that is installed, you might need to confirm  
the updated information in the Setup Utility program.  
To close the computer cover and connect cables to your computer:  
1. Ensure that all components have been reassembled correctly and that no tools  
or loose screws are left inside your computer.  
2. Clear any cables that might impede the replacement of the cover.  
3. Lower the drive bay assembly.  
4. Make sure all cables are routed correctly through the cable clip ꢀ1ꢁ.  
5. Close the computer cover.  
6. Install any locking devices such as a cable lock.  
7. Reconnect the external cables and power cords to the computer. See “Locating  
8. To update the configuration settings, see Chapter 5, “Using the Setup Utility,”  
Chapter 3. Installing options 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
32 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Recovering software  
The Rescue and Recovery program is software aimed at helping users restore their  
computer data and recover from software or hardware-related failures. In the event  
of a computer failure, use the Rescue and Recovery program to restore the contents  
of the primary hard drive to a previously saved state. This chapter will help you  
become familiar with recovery solutions provided by Lenovo.  
The Rescue and Recovery program has two components, Rescue and Recovery  
(Windows environment) and Rescue and Recovery workspace. Recovery operations  
can be launched from Windows or from a Rescue and Recovery workspace  
environment that is independent of the Windows operating system.  
If you encounter a problem, use the recovery tools from either the Windows  
environment or from the Rescue and Recovery workspace to perform one of the  
two recovery operations:  
v Rescue files  
v Restore your system or your individual files  
two recovery operations.  
Refer to the Access Help online help system for additional information about the  
Rescue and Recovery program. For information on how to access the online help  
system, see “Access Help” on page 54. The following information refers to the  
Rescue and Recovery Windows environment.  
Creating and using product recovery discs  
If your computer is equipped with a recordable CD or DVD drive, you can create a  
set of Product Recovery discs that enables you to restore the contents of the hard  
disk to the same state as when the computer was originally shipped from the  
factory. Product Recovery discs are useful if you transfer the computer to another  
area, sell the computer, recycle the computer, or as a last resort put the computer  
in an operational state after all other methods of recovery have failed. It is  
important to create a set of Product Recovery discs as soon as possible.  
Note: Your Microsoft Windows license permits you to create only one set of  
Product Recovery discs, so it is important that you store the discs in a safe  
place after you make them.  
To create Product Recovery discs, do the following:  
1. From the Windows desktop, click Start, select All Programs, select  
ThinkVantage, click Create Recovery Media.  
2. Follow the instructions on the screen.  
To use Product Recovery discs, do the following:  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
 
Attention: When you restore the factory contents from the Product Recovery  
discs, all files currently on the hard disk will be deleted and replaced by the  
original factory contents. During the restore process, you will be given the  
opportunity to save one or more files currently on your hard disk drive to other  
media before any data is removed.  
1. Insert the Rescue and Recovery disc into your CD or DVD drive.  
2. Restart your computer.  
3. After a short delay, the Rescue and Recovery workspace opens.  
Note: If the Rescue and Recovery workspace fails to open, you might not have  
your startup device (CD drive or DVD drive) set correctly in your BIOS  
on page 38 for more information.  
4. In the Rescue and Recovery menu, click Restore your system.  
5. Follow the instructions on the screen. Insert the appropriate Product Recovery  
disc when prompted.  
Note: After restoring your hard disk to the original factory content, you might  
have to reinstall some software or drivers. See “Using the Rescue and  
Backup and recovery  
The Rescue and Recovery program enables you to back up your complete hard  
disk contents including the operating system, data files, application programs, and  
personal settings. You can designate where the Rescue and Recovery program  
stores the backup:  
v On a protected area of your hard disk  
v On a second hard disk installed in your computer  
v On an externally attached USB hard disk  
v On a network drive  
v On recordable CDs or DVDs (a recordable CD or DVD drive is required for this  
option)  
After you have backed up your hard disk, you can restore the complete contents of  
the hard disk, restore selected files only, or restore only the Windows operating  
system and applications.  
To perform a backup operation from Rescue and Recovery, do the following:  
1. From the Windows desktop, click Start, click All Programs, click  
ThinkVantage, then click Rescue and Recovery. The Rescue and Recovery  
program opens.  
2. From the Rescue and Recovery main window, click Backup your hard drive to  
select backup operation options.  
3. Follow the instructions on the screen.  
To perform a restore operation from Rescue and Recovery, do the following:  
1. From the Windows desktop, click Start, click All Programs, click  
ThinkVantage, then click Rescue and Recovery. The Rescue and Recovery  
program opens.  
2. From the Rescue and Recovery main window, click the Restore your system  
from a backup icon.  
34 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Follow the instructions on the screen.  
For information about performing a restore operation from the Rescue and  
Using the Rescue and Recovery workspace  
The Rescue and Recovery workspace resides in a protected, hidden area of your  
hard disk that operates independently from the Windows operating system. This  
enables you to perform recovery operations even if the Windows operating system  
cannot be started. You can perform the following recovery operations from the  
Rescue and Recovery workspace:  
v Rescue files from your hard disk or from a backup: The Rescue and Recovery  
workspace enables you to locate files on your hard disk and transfer them to a  
network drive or other recordable media, such as a USB hard disk drive or a  
diskette. This solution is available, even if you did not back up your files or if  
changes were made to the files since your last backup operation. You also can  
rescue individual files from a Rescue and Recovery backup located on your local  
hard disk, a USB device, or a network drive.  
v Restore your hard disk from Rescue and Recovery backup: Once you perform  
a backup operation using the Rescue and Recovery program, you can perform  
restore operations from the Rescue and Recovery workspace, even if you cannot  
start Windows.  
v Restore your hard disk to the factory contents: The Rescue and Recovery  
workspace enables you to restore the complete contents of your hard disk to the  
same state as it was when originally shipped from the factory. If you have  
multiple partitions on your hard disk, you have the option to restore the factory  
contents to the C: partition and leave the other partitions intact. Because the  
Rescue and Recovery workspace operates independently from the Windows  
operating system, you can restore the factory contents even if you cannot start  
Windows.  
Attention: If you restore the hard disk from a Rescue and Recovery backup or  
restore the hard disk to the factory contents, all files on the primary hard disk  
partition (usually drive C) will be deleted in the recovery process. If possible, make  
copies of important files. If you are unable to start Windows, you can use the  
Rescue files feature in the Rescue and Recovery workspace to copy files from your  
hard disk to other media.  
To start the Rescue and Recovery workspace, do the following:  
1. Turn off your computer.  
2. Restart your computer.  
3. Repeatedly press and release F11.  
4. When you hear beeps or see a logo screen, release F11.  
5. If you set a Rescue and Recovery password, type your password when  
prompted. The Rescue and Recovery workspace opens after a short delay.  
Note: If the Rescue and Recovery workspace fails to open, see “Solving  
6. Do one of the following:  
v To rescue files from your hard disk or from a backup, click Rescue files in  
the Rescue and Recovery menu; then, follow the instructions on the screen.  
Chapter 4. Recovering software 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v To restore your hard disk from a Rescue and Recovery backup or to restore  
your hard drive to the factory contents, click Restore your system in the  
Rescue and Recovery menu; then, follow the instructions on the screen.  
Note: After restoring your hard disk to the original factory content, you  
might have to reinstall some software or drivers. Refer to the  
following notes for more information.  
v For information about other features of the Rescue and Recovery workspace,  
click Help.  
Notes:  
1. After restoring a hard disk to the original factory contents you might have to  
reinstall device drivers for some devices. See “Recovering or installing device  
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If  
you need to recover or reinstall your Microsoft Office or Microsoft Works  
applications, you must use the Microsoft Office CD or Microsoft Works CD. These  
CDs are provided only with computers that come with Microsoft Office or  
Microsoft Works preinstalled.  
Solving recovery problems  
If you are unable to access the Rescue and Recovery workspace or the Windows  
environment, you can:  
v Use your rescue media (CD, DVD, or USB hard disk) to gain access to the  
Rescue and Recovery workspace. See “Creating and using rescue media” for  
details.  
v Use a Recovery Repair diskette to repair the Rescue and Recovery workspace or  
repair a file needed to enter the Windows environment. See “Creating and using  
v If your intent is to restore the contents of the hard disk to its original factory  
state, you can use a set of Product Recovery discs. See “Creating and using  
It is important to create a Recovery Repair diskette, rescue media, and a set of  
Product Recovery discs as soon as possible and store them in a safe place as a  
precautionary measure.  
If you are unable to access the Rescue and Recovery workspace or the Windows  
environment from rescue media, a Recovery Repair diskette, or a set of Product  
Recovery CDs, you might not have the rescue device, CD drive, DVD drive or USB  
hard disk drive defined as a startup device in the BIOS startup sequence. See  
Creating and using rescue media  
Rescue media such as a CD or USB hard disk drive enables you to recover from  
failures that prevent you from gaining access to the Rescue and Recovery  
workspace on your hard disk.  
Note: The rescue disc, the first disc of the Product Recovery discs and the backup  
discs are startable (bootable). They can be started in any type of CD or DVD  
drive except for a DVD-RAM media.  
To create rescue media, do the following:  
36 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1. From the Windows desktop, click Start, click All Programs, click  
ThinkVantage, then click Create Recovery Media.  
2. In the Rescue Media area, select the type of rescue media you want to create.  
You can create rescue media using a CD, USB hard drive, or an internal hard  
drive.  
3. Click OK.  
4. Follow the instructions on the screen.  
To use rescue media, do one of the following:  
v Insert the rescue disc and restart your computer.  
v Attach your USB hard disk drive to one of the USB connectors on your  
computer, then turn on your computer.  
When the rescue media starts, the Rescue and Recovery workspace opens. Help for  
each feature is available from the Rescue and Recovery workspace. If your rescue  
media fails to start, you might not have your rescue device (CD drive, DVD drive,  
or USB device) set correctly in your BIOS startup sequence. See “Setting a rescue  
Creating and using a Recovery Repair diskette  
If you are unable to access the Rescue and Recovery workspace or the Windows  
environment, use a Recovery Repair diskette to repair the Rescue and Recovery  
workspace or repair a file needed to enter the Windows environment. It is  
important to create a Recovery Repair diskette as soon as possible and store it in a  
safe place.  
To create a Recovery Repair diskette, do the following:  
1. Start your computer and operating system.  
2. Using an Internet browser, go to the following Web address:  
3. Insert a diskette into diskette drive A. Information on the diskette will be  
erased and the diskette will be formatted appropriately.  
4. Double-click on the Recovery Repair rnrrepair.exe file. The diskette is created.  
5. Take out the diskette and label it Recovery Repair diskette.  
To use the Recovery Repair diskette, do the following:  
1. Shut down the operating system and turn off the computer.  
2. Insert the Recovery Repair diskette into diskette drive A.  
3. Turn on the computer and follow the instructions on the screen.  
Note: If the repair operation finishes without error, you will be able to access the  
Rescue and Recovery workspace by repeatedly pressing the F11 key while  
you restart your computer. When you hear beeps or see a logo screen,  
release F11. You will also be able to access the Windows environment after  
the repair operation finishes.  
If an error message appears during the repair operation and the repair operation  
cannot be completed, you might have a problem with the partition that contains  
the Rescue and Recovery workspace. Use your rescue media to access the Rescue  
Chapter 4. Recovering software 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
and Recovery workspace. For information about creating and using rescue media,  
Recovering or installing device drivers  
Before you can recover or install device drivers, your operating system must be  
installed on your computer. Make sure that you have the documentation and  
software media for the device.  
Device drivers for factory-installed devices are located on the computer hard disk  
(usually drive C) in the SWTOOLS\drivers folder. Other device drivers are on the  
software media that come with individual devices.  
The latest device drivers for factory-installed devices are also available on the  
To reinstall a device driver for a factory-installed device, do the following:  
1. Start your computer and operating system.  
2. Use Windows Explorer or My Computer to display the directory structure of  
your hard disk.  
3. Open the C:\SWTOOLS folder.  
4. Open the DRIVERS folder. Within the DRIVERS folder are several subfolders  
that are named for various devices that are installed in your computer (for  
example, AUDIO or VIDEO).  
5. Open the appropriate device subfolder.  
6. Use one of the following methods to reinstall the device driver:  
v In the device subfolder, look for a README. TEXT or other file with the  
.TXT extension. This file might be named after the operating system, such as  
WIN98.TXT. The text file has information on how to reinstall that device  
driver.  
v If the device subfolder contains a file with an .INF extension, you can use the  
Add New Hardware program (located in the Windows Control Panel) to  
reinstall the device driver. Not all device drivers can be reinstalled using this  
program. In the Add New Hardware program, when prompted for the  
device driver that you want to install, click Have Disk and Browse. Then  
select the appropriate device driver file from the device subfolder.  
v In the device subfolder, look for a SETUP.EXE file. Double-click SETUP.EXE  
and follow the instructions on the screen.  
Setting a rescue device in the startup sequence  
Before you start Rescue and Recovery from a CD, DVD, USB hard disk drive, or  
any external device, you must first change the startup sequence in the Setup  
Utility.  
To view or change the startup sequence, do the following:  
1. With the computer off, repeatedly press and release F1; then, turn on the  
computer.  
2. When the logo screen appears, or you hear a series of beeps, release F1.  
3. If you are prompted for a password, type your current password.  
4. From the Setup Utility main menu, use the right-arrow key to select Startup.  
5. Arrange the startup sequence to meet your needs.  
6. Press Esc twice to go to the Setup Utility exit menu.  
38 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7. Use the down-arrow key to select Save and exit the Setup Utility, then press  
Enter.  
8. When the Setup Confirmation window appears, press Enter.  
9. The computer restarts.  
Note: If you are using an external device, you first must turn off your computer  
before connecting the external device.  
For more information on Setup Utility, see Chapter 5, “Using the Setup Utility,” on  
Chapter 4. Recovering software 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Using the Setup Utility  
The Setup Utility program is stored in the electrically erasable programmable  
read-only memory (EEPROM) of your computer. The Setup Utility program is used  
to view and change the configuration settings of your computer, regardless of  
which operating system you are using. However, the operating-system settings  
might override any similar settings in the Setup Utility program.  
Starting the Setup Utility program  
To start the Setup Utility program, do the following:  
1. If your computer is already on when you start this procedure, shut down the  
operating system and turn off the computer.  
2. Repeatedly press and release the F1 key while turning on your computer.  
Note: If a user password or an administrator password has been set, the Setup  
Utility program menu is not displayed until you type your password.  
See “Using passwords” for more information.  
The Setup Utility might start automatically when POST detects that hardware has  
been removed or new hardware has been installed in your computer.  
Viewing and changing settings  
The Setup Utility program menu lists items that identify system configuration  
topics.  
When working with the Setup Utility program menu, you must use the keyboard.  
The keys used to perform various tasks are displayed at the bottom of each screen.  
Using passwords  
By using the Setup Utility program, you can set passwords to prevent  
unauthorized persons from gaining access to your computer and data. The  
following types of passwords are available:  
v User Password  
v Administrator Password  
You do not have to set any passwords to use your computer. However, if you  
decide to set any passwords, read the following sections.  
Password considerations  
A password can be any combination of up to twelve characters (a-z and 0-9) and  
symbols. For security reasons, it is a good idea to use a strong password that  
cannot be easily compromised. Strong passwords typically adhere to the following  
rules:  
v Have at least eight characters in length  
v Contain at least one alphabetic character, one numeric character, and one symbol  
v Contain at least one of the following symbols: , . / ` ; ' []  
v You can also use the space bar  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
 
v Setup Utility program and hard disk drive passwords are not case sensitive  
v Not be your name or your user name  
v Not be a common word or a common name  
v Be significantly different from your previous password  
User Password  
When a User Password is set, the user is prompted to type a valid password each  
time the computer is turned on. The computer cannot be used until a valid  
password is typed from the keyboard.  
Administrator Password  
Setting an Administrator Password deters unauthorized persons from changing  
configuration settings. If you are responsible for maintaining the settings of several  
computers, you might want to set an Administrator Password.  
After you set an Administrator Password, a password prompt is displayed each  
time you try to access the Setup Utility program.  
If both the user and administrator passwords are set, you can type either  
password. However, to change any configuration settings, you must use your  
administrator password.  
Setting, changing, and deleting a password  
To set, change, or delete a password, do the following:  
Note: A password can be any combination of up to twelve characters (A- Z, a-z,  
and 0-9). See “Password considerations” on page 41 for more information.  
1. Start the Setup Utility program (see Chapter 5, “Using the Setup Utility,” on  
2. From the Setup Utility program menu, select Security.  
3. Select Set Passwords. Read the information displayed on the right side of the  
screen.  
Selecting a startup device  
If your computer does not start up (boot) from a device such as the CD-ROM,  
diskette, or hard disk as expected, use one of the following procedures to select a  
startup device.  
Selecting a temporary startup device  
Use this procedure to startup from any boot device.  
Note: Not all CDs, hard disks, and diskettes are startable (bootable).  
1. Turn off your computer.  
2. Press and hold the F12 key then turn on the computer. When the Startup  
Device Menu appears, release the F12 key.  
Note: If you are using a USB keyboard and the Startup Device Menu does not  
display using this method, repeatedly press and release the F12 key  
rather than leaving it pressed when turning on the computer.  
3. Select the desired startup device from the Startup Device Menu and press Enter  
to begin.  
42 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note: Selecting a startup device from the Startup Device menu does not  
permanently change the startup sequence.  
Changing the startup device sequence  
To view or permanently change the configured startup device sequence, do the  
following:  
1. Start the Setup Utility program (see “Starting the Setup Utility program” on  
2. Select Startup.  
3. Select Startup Sequence. See the information displayed on the right side of the  
screen.  
4. Select the devices for the Primary Startup Sequence, the Automatic Startup  
Sequence, and the Error Startup Sequence.  
5. Select Exit from the Setup Utility menu and then Save Settings or Save and  
exit the Setup Utility.  
If you have changed these settings and want to return to the default settings, select  
Load Default Settings on the Exit menu.  
Advanced settings  
On some computer models the Advanced settings menu includes a setting to  
Enable/Disable HyperThreading. This feature works only with  
HyperThreading-aware operating systems such as Microsoft Windows XP. The  
default setting for HyperThreading is Enabled. However, if you select Set Defaults  
and are using an operating system other than Windows XP, your computer  
performance might be degraded. Therefore, you should always set  
HyperThreading to Disabled unless you are sure your operating system supports  
HyperThreading.  
Exiting from the Setup Utility program  
When you finish viewing or changing settings, press Esc to return to the Setup  
Utility program menu (you might have to press Esc several times). If you want to  
save the new settings, select Save Settings or Save and exit the Setup Utility.  
Otherwise, your changes will not be saved.  
Chapter 5. Using the Setup Utility 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
44 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Updating system programs  
This chapter contains information about updating POST/BIOS and how to recover  
from a POST/BIOS update failure.  
Using system programs  
System programs are the basic layer of software that is built into your computer.  
They include the power-on self-test (POST), the basic input/output system (BIOS)  
code, and the Setup Utility program. POST is a set of tests and procedures that is  
performed each time you turn on your computer. BIOS is a layer of software that  
translates instructions from other layers of software into electrical signals that the  
computer hardware can understand. You can use the Setup Utility program to  
view and change the configuration and setup of your computer.  
Your computer system board has a module called electrically erasable  
programmable read-only memory (EEPROM, also referred to as flash memory).  
You can easily update POST, BIOS, and the Setup Utility program by starting your  
computer using a flash update diskette or by running a special update program  
from your operating system.  
Lenovo might make changes and enhancements to the POST/BIOS. When updates  
are released, they are available as downloadable files on the Lenovo Web site at  
available in a .txt file that is included with the update files. For most models, you  
can download either an update program to create a system-program-update (flash)  
diskette or an update program that can be run from the operating system.  
Note: You can download a self starting bootable CD image (known as an .iso  
systems without a diskette drive.  
Updating (flashing) BIOS from a diskette  
To update (flash) the BIOS from a diskette, do the following:  
1. Insert a system program update (flash) diskette into the diskette drive. System  
World Wide Web.  
2. Turn on the computer. If the computer is on already, you must turn it off and  
back on again. The update begins.  
3. Follow the instructions on the screen to complete the update.  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
 
46 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7. Troubleshooting and diagnostics  
This chapter describes some basic troubleshooting and diagnostic programs. If your  
computer problem is not described here, see Chapter 8, “Getting information, help,  
and service,” on page 53 for additional troubleshooting resources.  
Basic troubleshooting  
The following table provides information to help you troubleshoot your computer  
problem.  
Symptom  
Action  
The computer does not start  
when you press the power  
button.  
Verify that:  
v The power cord is plugged into the rear of the computer and into a working  
electrical outlet.  
v If your computer has a secondary power switch on the back of the computer,  
ensure that it is switched on.  
v The power indicator on the front of the computer is on.  
If you cannot correct the problem, have the computer serviced. Refer to the  
warranty and safety information that is provided with your computer for a list of  
service and support telephone numbers.  
The monitor screen is blank.  
Verify that:  
v The monitor cable is securely attached to the rear of the monitor and to the  
rear of the computer.  
v The monitor power cord is plugged into the monitor and into a working  
electrical outlet.  
v The monitor is turned on and the brightness and contrast controls are set  
correctly.  
v The monitor signal cable is securely connected to the monitor and to the  
monitor connector on the computer.  
Note: If your computer has two monitor connectors, verify that your monitor is  
connected to the one in the AGP option connector rather than the one in the rear  
of the system board. For more information, “Connecting your computer” on page  
If you cannot correct the problem, have the computer serviced. Refer to the  
warranty and safety information that is provided with your computer for a list of  
service and support telephone numbers.  
The keyboard does not work.  
The computer does not respond  
to the keyboard.  
Verify that:  
v The computer is turned on.  
v The monitor is turned on and the brightness and contrast controls are set  
correctly.  
v The keyboard is securely connected to a USB connector on the front or rear of  
the computer.  
v No keys are stuck.  
If you cannot correct the problem, have the computer serviced. Refer to the  
warranty and safety information that is provided with your computer for a list of  
service and support telephone numbers.  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
 
Symptom  
Action  
The Enhanced Performance USB Verify that:  
Keyboard does not work.  
v The computer is turned on.  
v The keyboard is securely connected to a USB connector on the front or rear of  
the computer.  
v No keys are stuck.  
If you cannot correct the problem, have the computer serviced. Refer to the  
warranty and safety information that is provided with your computer for a list of  
service and support telephone numbers.  
The mouse does not work. The  
computer does not respond to  
the mouse.  
Verify that:  
v The computer is turned on.  
v The mouse is securely connected to a USB connector on the front or rear of the  
computer.  
v The mouse is clean. Refer to “Cleaning the mouse” on page 50 for further  
information.  
If you cannot correct the problem, have the computer serviced. Refer to the  
warranty and safety information that is provided with your computer for a list of  
service and support telephone numbers.  
The operating system will not  
start.  
Verify that:  
v There is no diskette in the diskette drive.  
v The startup sequence includes the device where the operating system resides.  
Usually, the operating system is on the hard disk. See “Selecting a startup  
device” on page 42 for more information.  
If you cannot correct the problem, have the computer serviced. Refer to the  
warranty and safety information that is provided with your computer for a list of  
service and support telephone numbers.  
The computer beeps multiple  
times before the operating  
system starts.  
Verify that no keys are stuck down.  
If you cannot correct the problem, have the computer serviced. Refer to the  
warranty and safety information that is provided with your computer for a list of  
service and support telephone numbers.  
Diagnostic programs  
Diagnostic programs are used to test hardware components of your computer and  
report operating-system-controlled settings that can cause hardware failures. There  
are two diagnostic programs preinstalled on your computer to help you diagnose  
problems: PC-Doctor for Windows and PC-Doctor for DOS.  
Notes:  
1. You can download the latest version of the diagnostic programs from  
Quick Path field and click Go to find the downloadable files that are specific to  
your computer.  
2. If you are unable to isolate and repair the problem yourself after you run  
PC-Doctor for Windows and PC-Doctor for DOS, save and print the log files  
created by both diagnostic programs. You will need the log files when you  
speak to a Lenovo technical support representative. (The log file created by  
PC-Doctor for Windows is automatically saved in C:\PCDR\DETAILED.TXT.)  
48 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PC-Doctor for Windows  
PC-Doctor for Windows is a diagnostic program that works through the Windows  
operating system. The PC-Doctor for Windows diagnostic program enables you to  
view symptoms and solutions for computer problems, access the Lenovo  
troubleshooting center, update system drivers, and review system information.  
To open PC-Doctor for Windows, click Start from the Windows desktop, select All  
Programs, select PC-Doctor for Windows, and click PC-Doctor for Windows.  
Follow the instructions on the screen. For additional information about running the  
diagnostic program, refer to the PC-Doctor for Windows help system.  
If you still suspect a problem after PC-Doctor for Windows runs successfully, run  
PC-Doctor for DOS to help you diagnose your computer problem.  
PC-Doctor for DOS  
The PC-Doctor for DOS diagnostic program is part of the Rescue and Recovery  
workspace and runs independently of the Windows operating system. Use  
PC-Doctor for DOS, if you are unable to start the Windows operating system or if  
PC-Doctor for Windows has not been successful in isolating a possible problem.  
You can run PC-Doctor for DOS from a diagnostic CD image or diagnostic  
diskettes that you create. You can also run PC-Doctor for DOS from the Rescue and  
Recovery workspace.  
Note: Be sure to create a diagnostic CD image or diagnostic diskettes in case you  
are unable to run PC-Doctor for DOS from the Rescue and Recovery  
workspace.  
Creating a diagnostic CD image  
To create a diagnostic CD image, download a self-starting bootable CD image  
(known as an .iso image) of the diagnostic program from http://  
www.lenovo.com/support/. After you download the image, you can create the CD  
using any CD burning software.  
If your computer does not have a CD burner or you do not have Internet access,  
Creating diagnostic diskettes  
To create diagnostic diskettes, download the PC-Doctor for DOS diagnostic  
diskettes.  
If you do not have Internet access, create the diagnostic diskettes using the  
following procedure:  
Note: You will need a diskette drive on your computer or a USB diskette drive to  
complete this procedure.  
1. Shut down the operating system and turn off the computer.  
2. If you are using a USB diskette drive, plug it into the computer.  
3. Repeatedly press and release the F11 key as you turn on the computer.  
4. When you hear beeps or see a logo screen, stop pressing the F11 key. The  
Rescue and Recovery workspace opens.  
Note: For some models, press the Esc key to enter Rescue and Recovery.  
5. From the Rescue and Recovery workspace, select Create diagnostic disks.  
Chapter 7. Troubleshooting and diagnostics 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6. Follow the instructions on the screen.  
7. When prompted, insert a blank, formatted diskette into the diskette drive and  
continue to follow the instructions on the screen.  
8. When the operation is complete, remove the diskette and click Quit.  
9. Insert another blank, formatted diskette into the diskette drive and continue to  
follow the instructions on the screen.  
10. When the operation is complete, remove the diskette and click Quit.  
Running diagnostics from the CD or diskettes  
To run diagnostics from the diagnostic CD image or diagnostic diskettes that you  
created, use the following procedure:  
1. Make sure your computer is turned off.  
2. If you are running diagnostics from diskettes using a USB diskette drive, plug  
in the USB device.  
3. Insert the CD into the optical drive or the first diagnostic diskette into the  
diskette drive.  
4. Restart the computer.  
Note: If the diagnostic program does not start, you might not have your optical  
drive or diskette drive set as a startable device. See “Selecting a startup  
device” on page 42 for instructions on how to change the startup device.  
5. When the diagnostics program opens, follow the instructions on the screen.  
Note: If you are running diagnostics from a diskette, when prompted, remove  
the first diskette and insert the second diskette.  
6. When the program finishes, be sure to remove the CD or diskette from the  
drive.  
7. Select the diagnostic test you want to run. Press the F1 key for additional help.  
Running diagnostics from the Rescue and Recovery workspace  
If you did not create a diagnostic CD image or diagnostic diskettes, you can run  
the PC-Doctor for DOS diagnostic program from the Rescue and Recovery  
workspace. To run diagnostics from the Rescue and Recovery workspace, use the  
following procedure:  
1. Shut down the operating system and turn off the computer.  
2. Repeatedly press and release the F11 key as you turn on the computer.  
3. When you hear beeps or see a logo screen, stop pressing the F11 key. The  
Rescue and Recovery workspace opens.  
Note: For some models, press the Esc key to enter Rescue and Recovery.  
4. From the Rescue and Recovery workspace, select Diagnose hardware.  
5. Follow the prompts on the screen. The computer will reboot.  
6. When the computer restarts, the diagnostic program opens automatically. Select  
the diagnostic test you want to run. Press the F1 key for additional help.  
Cleaning the mouse  
This section provides instructions on how to clean your mouse. The procedure will  
be different depending on whether you have an optical or non-optical mouse.  
50 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optical mouse  
An optical mouse uses a light-emitting diode (LED) and an optical sensor to  
navigate the pointer. If the pointer on the screen does not move smoothly with the  
optical mouse, you might need to clean the mouse. Use the following procedure to  
clean the optical mouse:  
1. Turn off your computer.  
2. Disconnect the mouse cable from the computer.  
3. Turn the mouse upside down to look at the lens.  
a. If there is a smudge on the lens, gently clean the area with a plain  
cotton-tipped swab.  
b. If there is some debris in the lens, gently blow the debris away from the  
area.  
4. Check the surface on which you are using the mouse. If you have a very  
intricate picture or pattern beneath the mouse it may be difficult for the digital  
signal processor (DSP) to determine changes in the mouse position.  
5. Reconnect the mouse cable to the computer.  
6. Turn your computer back on.  
Non-optical mouse  
The non-optical mouse uses a ball to navigate the pointer. If the pointer on the  
screen does not move smoothly with the mouse, you might need to clean the  
mouse. Use the following procedure to clean the non-optical mouse:  
Note: The following illustration might be slightly different from your mouse.  
ꢀ1ꢁ Retainer ring  
ꢀ2ꢁ Ball  
ꢀ3ꢁ Plastic rollers  
ꢀ4ꢁ Ball cage  
Chapter 7. Troubleshooting and diagnostics 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To clean a mouse with a ball, follow the instructions below:  
1. Turn off your computer.  
2. Disconnect the mouse cable from the computer.  
3. Turn the mouse upside down. Twist the retainer ring ꢀ1ꢁ to the unlocked  
position to remove the ball.  
4. Place your hand over the retainer ring and ball ꢀ2ꢁ, and then turn the mouse  
right-side up, so that the retainer ring and ball fall out into your hand.  
5. Wash the ball in warm, soapy water then dry it with a clean cloth.  
6. Blow air carefully into the ball cage ꢀ4ꢁ to dislodge dust and lint.  
7. Look for a build up of dirt on the plastic rollers ꢀ3ꢁ inside the ball cage. This  
build up usually appears as a stripe running across the middle of the rollers.  
8. If the rollers are dirty, clean them by using a cotton swab soaked in isopropyl  
(rubbing) alcohol. Turn the rollers with your finger and continue swabbing  
them until all the dirt is removed. Be sure the rollers are still centered in their  
channels after you clean them.  
9. Remove any fibers from the swab that might be remaining on the rollers.  
10. Replace the ball and the retainer ring. Twist the retainer ring to the locked  
position.  
11. Reconnect the mouse cable to the computer.  
12. Turn your computer back on.  
52 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 8. Getting information, help, and service  
If you need help, service, or technical assistance or just want more information  
about products manufactured by Lenovo, you will find a wide variety of sources  
available from Lenovo to assist you.  
Information resources  
This section provides information on how to access useful resources relating to  
your computing needs.  
Online Books folder  
The Online Books folder provides publications to help you set up and use your  
computer. The Online Books folder is preinstalled on your computer and requires  
no Internet access to view the publications. In addition to this User Guide you are  
reading, the Hardware Replacement Guide is also available in the Online Books  
folder.  
The Hardware Replacement Guide provides step-by-step instructions for replacing  
Customer Replacement Units (CRUs) in your computer. CRUs are computer parts  
that can be upgraded or replaced by the customer.  
To view a publication, click Start, select All Programs, select Online Books, and  
click Online Books. Double-click on the appropriate publication for your  
computer. The publications also are available on the Lenovo Web site at  
Notes:  
1. These publications are in Portable Document Format (PDF) format, which  
requires Adobe Acrobat Reader to be installed. If Adobe Acrobat Reader has  
not yet been installed on your computer, a message will appear when you  
attempt to view the PDF file and you will be guided through the Adobe  
Acrobat Reader installation.  
2. The publications that are preinstalled on your computer are available in other  
languages on the Lenovo Support Web site at http://www.lenovo.com/  
support/.  
3. If you want to install a different language version of Adobe Acrobat Reader  
than the version provided on your computer, go to the Adobe Web site at  
ThinkVantage Productivity Center  
The ThinkVantage Productivity Center program guides you to a host of  
information sources and tools designed to make computing simpler and more  
secure while helping to reduce costs and increase productivity. The ThinkVantage  
Productivity Center program helps you set up, understand, and enhance your  
computer.  
The ThinkVantage Productivity Center program provides information about your  
computer and easy access to various technologies, such as:  
v The Rescue and Recovery program  
v Productivity Center  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
 
v Client Security Solutions  
v Factory Recovery  
v System Updates  
v Service and support  
Note: ThinkVantage Technologies are only available on select Lenovo computers.  
To access the ThinkVantage Productivity Center program, click Start, select All  
Programs, select ThinkVantage, and click Productivity Center.  
Access Help  
The Access Help online help system provides information about getting started,  
doing basic tasks, customizing settings for your personal preference, protecting  
data, expanding and upgrading, and troubleshooting.  
To open Access Help, click Start, select All Programs, select ThinkVantage, and  
click Access Help. After you have opened Access Help, use the left panel to make  
a selection from the Contents or Index tab, or use the Search tab to find a  
particular word or phrase.  
Warranty and safety  
The warranty and safety information that is provided with your computer contains  
information on safety, warranty, notices, and Customer Replacement Units (CRUs).  
For more information on CRUs, see “Service” on page vi.  
information and services to help you buy, upgrade, and maintain your computer.  
You can access the most up-to-date information for your computer on the Lenovo  
v Shop for desktop and notebook computers, monitors, projectors, upgrades and  
accessories for your computer, and special offers.  
v Purchase additional services, such as support for hardware, operating systems,  
application programs, network setup and configuration, and custom  
installations.  
v Purchase upgrades and extended hardware repair services.  
v Download the latest device drivers and software updates for your computer  
model.  
v Access the online manuals for your products.  
v Access the Lenovo Statement of Limited Warranty.  
v Access troubleshooting and support information for your computer model and  
other supported products.  
v Find the service and support phone number for your country or region.  
v Find a service provider located near you.  
Help and service  
If you need help and service for your computer, you will find a wide variety of  
sources available to help you.  
54 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the documentation and diagnostic programs  
Many computer problems can be solved without outside assistance. If you  
experience a problem with your computer, see Chapter 7, “Troubleshooting and  
diagnostics,” on page 47. For information on additional resources to help you  
troubleshoot your computer problem, see “Information resources” on page 53.  
If you suspect a software problem, see the documentation, including README  
files and online help, that comes with the operating system or application program.  
Most computers come with a set of diagnostic programs that you can use to help  
you identify hardware problems. For instructions on using the diagnostic  
The troubleshooting information or the diagnostic programs might tell you that  
you need additional or updated device drivers or other software. Lenovo  
maintains pages on the World Wide Web where you can get the latest technical  
information and download device drivers and updates. To access these pages, go  
Calling for service  
If you have tried to correct the problem yourself and still need help, during the  
warranty period you can get help and information by telephone through the  
Customer Support Center. The following services are available during the warranty  
period:  
v Problem determination - Trained personnel are available to assist you with  
determining if you have a hardware problem and deciding what action is  
necessary to fix the problem.  
v Hardware repair - If the problem is determined to be caused by hardware under  
warranty, trained service personnel are available to provide the applicable level  
of service.  
v Engineering Change management - Occasionally, there might be changes that  
are required after a product has been sold. Lenovo or your reseller, if authorized  
by Lenovo, will make selected Engineering Changes (ECs) available that apply  
to your hardware.  
Note: The following items are not covered:  
v Replacement or use of parts not manufactured for or by Lenovo or  
nonwarranted Lenovo parts  
v Identification of software problem sources  
v Configuration of BIOS as part of an installation or upgrade  
v Changes, modifications, or upgrades to device drivers  
v Installation and maintenance of network operating systems (NOS)  
v Installation and maintenance of application programs  
Refer to the warranty and safety information that is provided with your computer  
for a full explanation of warranty terms. Be sure to retain your proof of purchase  
to obtain warranty service.  
For a list of service and support phone numbers for your country or region, go to  
http://www.lenovo.com/support/ and click Support phone list or refer to the  
warranty and safety information provided with your computer.  
Chapter 8. Getting information, help, and service 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note: Phone numbers are subject to change without notice. If the number for your  
country or region is not provided, contact your Lenovo reseller or Lenovo  
marketing representative.  
If possible, be at your computer when you call and have the following information  
available:  
v Machine type and model  
v Serial numbers of your hardware products  
v Description of the problem  
v Exact wording of any error messages  
v Hardware and software configuration information  
Using other services  
If you travel with your computer or relocate it to a country where your desktop or  
notebook computer machine type is sold, your computer might be eligible for  
International Warranty Service, which automatically entitles you to obtain warranty  
service throughout the warranty period. Service will be performed by service  
providers authorized to perform warranty service.  
Service methods and procedures vary by country, and some services might not be  
available in all countries. International Warranty Service is delivered through the  
method of service (such as depot, carry-in, or on-site service) that is provided in  
the servicing country. Service centers in certain countries might not be able to  
service all models of a particular machine type. In some countries, fees and  
restrictions might apply at the time of service.  
To determine whether your computer is eligible for International Warranty Service  
and to view a list of the countries where service is available, go to  
http://www.lenovo.com/support/, click Warranty, and follow the instructions on  
the screen.  
For technical assistance with the installation of or questions related to Service  
Packs for your preinstalled Microsoft Windows product, refer to the Microsoft  
you can contact the Customer Support Center. Some fees might apply.  
Purchasing additional services  
During and after the warranty period, you can purchase additional services, such  
as support for hardware, operating systems, and application programs; network  
setup and configuration; upgraded or extended hardware repair services; and  
custom installations. Service availability and service name might vary by country  
or region. For more information about these services, go to the Lenovo Web site at  
56 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix A. Manual modem commands  
This appendix provides commands for manually programming your modem.  
Commands are accepted by the modem while it is in Command Mode. Your  
modem is automatically in Command Mode until you dial a number and establish  
a connection. Commands can be sent to your modem from a PC running  
communication software or any other terminal devices.  
All commands sent to the modem must begin with AT and end with ENTER. All  
commands can be typed in either upper or lower case, but not mixed. To make the  
command line more readable, spaces can be inserted between commands. If you  
omit a parameter from a command that requires one, it is just like specifying a  
parameter of 0.  
Example:  
ATH [ENTER]  
Note: In the following tables, all default settings are printed in bold text.  
Basic AT commands  
Command  
Function  
A
Manually answer incoming call.  
A/  
Repeat last command executed. Do not  
precede A/ with AT or follow with ENTER.  
D_  
0 - 9, A-D, # and *  
last number redial  
pulse dialing  
L
P
Note: Pulse dialing is not supported for  
Australia, New Zealand, Norway, and South  
Africa.  
T
W
,
touch-tone dialing  
wait for second dial tone  
pause  
@
!
wait for five seconds of silence  
flash  
;
return to Command Mode after dialing  
DS=n  
E_  
Dial one of the four telephone numbers  
(n=0-3) stored in the modem non-volatile  
memory.  
E0  
Commands are not echoed  
E1  
Commands are echoed  
+++  
Escape Characters - Switch from Data Mode  
to Command Mode (T.I.E.S. Command)  
H_  
H0  
Force modem on-hook (hang up)  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Command  
I_  
Function  
H1  
Force modem off-hook (make busy)  
Note: H1 command is not supported for Italy  
Display product-identification code  
Factory ROM checksum test  
Internal memory test  
I0  
I1  
I2  
I3  
Firmware ID  
I4  
Reserved ID  
L_  
L0  
L1  
L2  
L3  
M0  
M1  
M2  
M3  
Low speaker volume  
Low speaker volume  
Medium speaker volume  
High speaker volume  
M_  
Internal speaker off  
Internal speaker on until carrier detected  
Internal speaker always on  
Internal speaker on until carrier detected and  
off while dialing  
N_  
O_  
Included for compatibility only, provides no  
effect  
O0  
O1  
Return to Data Mode  
Return to Data Mode and initiate an equalizer  
retrain  
P
Set Pulse dial as default  
Modem sends responses  
Read and display value in register r.  
Set register r to value n (n = 0-255).  
Set Tone Dial as default  
Numeric responses  
Q_  
Sr?  
Sr=n  
T
Q0  
V_  
V0  
V1  
W0  
W1  
Word responses  
W_  
X_  
Report DTE speed only  
Report line speed, error correction protocol,  
and DTE speed.  
W2  
X0  
Report DCE speed only  
Hayes Smartmodem 300 compatible  
responses/blind dialing.  
X1  
Same as X0 plus all CONNECT  
responses/blind dialing  
X2  
X3  
X4  
Same as X1 plus dial tone detection  
Same as X1 plus busy detection/blind dialing  
All responses and dial tone and busy signal  
detection  
Z_  
Z0  
Z1  
Reset and retrieve active profile 0  
Reset and retrieve active profile 1  
58 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extended AT commands  
Command  
&C_  
Function  
&C0  
&C1  
&D0  
&D1  
Force Carrier Detect Signal High (ON)  
Turn on CD when remote carrier is present  
Modem ignores the DTR signal  
&D_  
Modem returns to Command Mode after DTR  
toggle  
&D2  
Modem hangs up, returns to the Command  
Mode after DTR toggle  
&D3  
&F  
Resets modem after DTR toggle  
Recall factory default configuration  
Guard tone disabled  
&F_  
&G_  
&G0  
&G1  
&G2  
&K0  
&K3  
&K4  
&K5  
&K6  
Guard tone disabled  
1800 Hz guard tone  
&K_  
Disable flow control  
Enable RTS/CTS hardware flow control  
Enable XON/XOFF software flow control  
Enable transparent XON/XOFF flow control  
Enable both RTS/CTS and XON/XOFF flow  
control  
&M_  
&P_  
&M0  
&P0  
&P1  
&P2  
Asynchronous operation  
US setting for off-hook-to-on-hook ratio  
UK and Hong Kong off-hook-to-on-hook ratio  
Same as &P0 setting but at 20 pulses per  
minute  
&P3  
Same as &P1 setting but at 20 pulses per  
minute  
&R_  
&S_  
&R0  
&R1  
&S0  
&S1  
Reserved  
CTS operates per flow control requirements  
Force DSR Signal High (ON)  
DSR off in command mode, on in on-line  
mode  
&T_  
&T0  
&T1  
&T3  
&T4  
Ends test in progress  
Perform Local Analog Loopback Test  
Perform Local Digital Loopback Test  
Grant Remote Digital Loopback Test request  
by remote modem  
&T5  
&T6  
&T7  
Deny Remote Digital Loopback Test request  
Perform a Remote Digital Loopback Test  
Perform a Remote Digital Loopback Test and  
Self-Test  
&T8  
&V0  
Perform Local Analog Loopback Test and  
Self-Test  
&V  
Displays Active and Stored Profiles  
Appendix A. Manual modem commands 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Command  
&W_  
Function  
&V1  
&W0  
&W1  
%E0  
%E1  
Display Last Connection Statistics  
Stores the active profile as Profile 0  
Stores the active profile as Profile 1  
Disable auto-retrain  
%E_  
Enable auto-retrain  
+MS?  
Displays the current Select Modulation  
settings  
+MS=?  
Displays a list of supported Select Modulation  
options  
+MS=a,b,c,e,f  
Select modulation where: a=0, 1, 2, 3, 9, 10, 11,  
12, 56, 64, 69; b=0-1; c=300-56000; d=300-  
56000; e=0-1; and f=0-1. A, b, c, d, e, f  
default=12, 1, 300, 56000, 0, 0. Parameter “a”  
specifies the modulation protocol desired  
where: 0=V.21, 1=V.22, 2=V.22bis, 3=V.23,  
9=V.32, 10=V.32bis, 11=V.34,  
12=V.90,K56Flex,V.34......,56=K 56Flex,  
V.90,V.34......, 64=Bell 103, and 69=Bell 212.  
Parameter “b” specifies automode operations  
where: 0=automode disabled, 1= automode  
enabled with V.8/V.32 Annex A. Parameter  
“c” specifies the minimum connection data  
rate (300- 56000). Parameter “d” specifies the  
maximum connection rate (300-56000);  
Parameter “e” specifies the codec type (0=  
Law, and 1=A-Law). Parameter “f” specifies  
“robbed bit” signaling detection (0=detection  
disabled 1=detection enabled)  
MNP/V.42/V.42bis/V.44 commands  
Command  
Function  
%C_  
%C0  
%C1  
%C2  
%C3  
&Q0  
&Q5  
&Q6  
Disable MNP Class 5 and V.42bis data compression  
Enable MNP Class 5 data compression only  
Enable V.42bis data compression only  
Enable MNP Class 5 and V.42bis data compression  
Direct data link only (same as \N1)  
V.42 data link with fallback options  
Normal data link only (same as \N0)  
Disable V.44  
&Q_  
+DS44=0, 0  
+DS44=3, 0  
+DS44?  
Enable V.44  
Current values  
+DS44=?  
List of support values  
60 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Fax Class 1 commands  
+FAE=n  
Data/Fax Auto Answer  
Service Class  
+FCLASS=n  
+FRH=n  
+FRM=n  
+FRS=n  
Receive data with HDLC framing  
Receive data  
Receive silence  
+FTH=n  
+FTM=n  
+FTS=n  
Transmit data with HDLC framing  
Transmit data  
Stop transmission and wait  
Fax Class 2 commands  
+FCLASS=n  
+FAA=n  
+FAXERR  
+FBOR  
+FBUF?  
+FCFR  
Services class.  
Adaptive answer.  
Fax error value.  
Phase C data bit order.  
Buffer size (read only).  
Indicate confirmation to receive.  
Service class.  
+FCLASS=  
+FCON  
+FCIG  
Facsimile connection response.  
Set the polled station identification.  
Report the polled station identification.  
Capability to receive.  
+FCIG:  
+FCR  
+FCR=  
Capability to receive.  
+FCSI:  
Report the called station ID.  
DCE capabilities parameters.  
Report current session.  
Current session results.  
Report remote capabilities.  
Current sessions parameters.  
Begin or continue phase C receive data.  
Data transmission.  
+FDCC=  
+FDCS:  
+FDCS=  
+FDIS:  
+FDIS=  
+FDR  
+FDT=  
+FDTC:  
+FET:  
Report the polled station capabilities.  
Post page message response.  
Transmit page punctuation.  
Call termination with status.  
Session termination.  
+FET=N  
+FHNG  
+FK  
+FLID=  
+FLPL  
Local ID string.  
Document for polling.  
+FMDL?  
+FMFR?  
Identify model.  
Identify manufacturer.  
Appendix A. Manual modem commands 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
+FPHCTO  
+FPOLL  
+FPTS:  
Phase C time out.  
Indicates polling request.  
Page transfer status.  
Page transfer status.  
Identify revision.  
+FPTS=  
+FREV?  
+FSPT  
Enable polling.  
+FTSI:  
Report the transmit station ID.  
Voice commands  
#BDR  
#CID  
Select Baud Rate  
Enable Caller ID detection and reporting format  
Select Data, Fax or Voice/Audio  
Identify Model  
#CLS  
#MDL?  
#MFR?  
#REV?  
#TL  
Identify Manufacturer  
Identify Revision Level  
Audio output transmit level  
Query Buffer Size  
#VBQ?  
#VBS  
#VBT  
#VCI?  
#VLS  
#VRA  
#VRN  
#VRX  
#VSDB  
#VSK  
#VSP  
#VSR  
#VSS  
#VTD  
#VTM  
#VTS  
#VTX  
Bits per sample (ADPCM or PCM)  
Beep Tone Timer  
Identify Compression Method  
Voice line select  
Ringback goes away timer  
Ringback never came timer  
Voice Receive Mode  
Silence deletion tuner  
Buffer skid setting  
Silence detection period  
Sampling rate selection  
Silence deletion tuner  
DTMF tone reporting capability  
Enable timing mark placement  
Generate tone signals  
Voice transmit mode  
62 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Attention Switzerland User:  
If your Swisscom phone line does not have Taxsignal switched OFF, modem  
function may be impaired. The impairment may be resolved by a filter with  
the following specifications:  
Telekom PTT SCR-BE  
Taximpulssperrfilter-12kHz  
PTT Art. 444.112.7  
Bakom 93.0291.Z.N  
Appendix A. Manual modem commands 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B. Notices  
Lenovo may not offer the products, services, or features discussed in this  
document in all countries. Consult your local Lenovo representative for  
information on the products and services currently available in your area. Any  
reference to a Lenovo product, program, or service is not intended to state or  
imply that only that Lenovo product, program, or service may be used. Any  
functionally equivalent product, program, or service that does not infringe any  
Lenovo intellectual property right may be used instead. However, it is the user’s  
responsibility to evaluate and verify the operation of any other product, program,  
or service.  
Lenovo may have patents or pending patent applications covering subject matter  
described in this document. The furnishing of this document does not give you  
any license to these patents. You can send license inquiries, in writing, to:  
Lenovo (United States), Inc.  
500 Park Offices Drive, Hwy. 54  
Research Triangle Park, NC 27709  
U.S.A.  
Attention: Lenovo Director of Licensing  
LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS” WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some  
jurisdictions do not allow disclaimer of express or implied warranties in certain  
transactions, therefore, this statement may not apply to you.  
This information could include technical inaccuracies or typographical errors.  
Changes are periodically made to the information herein; these changes will be  
incorporated in new editions of the publication. Lenovo may make improvements  
and/or changes in the product(s) and/or the program(s) described in this  
publication at any time without notice.  
The products described in this document are not intended for use in implantation  
or other life support applications where malfunction may result in injury or death  
to persons. The information contained in this document does not affect or change  
Lenovo product specifications or warranties. Nothing in this document shall  
operate as an express or implied license or indemnity under the intellectual  
property rights of Lenovo or third parties. All information contained in this  
document was obtained in specific environments and is presented as an  
illustration. The result obtained in other operating environments may vary.  
Lenovo may use or distribute any of the information you supply in any way it  
believes appropriate without incurring any obligation to you.  
Any references in this publication to non-Lenovo Web sites are provided for  
convenience only and do not in any manner serve as an endorsement of those Web  
sites. The materials at those Web sites are not part of the materials for this Lenovo  
product, and use of those Web sites is at your own risk.  
Any performance data contained herein was determined in a controlled  
environment. Therefore, the result obtained in other operating environments may  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
 
vary significantly. Some measurements may have been made on development-level  
systems and there is no guarantee that these measurements will be the same on  
generally available systems. Furthermore, some measurements may have been  
estimated through extrapolation. Actual results may vary. Users of this document  
should verify the applicable data for their specific environment.  
Television output notice  
The following notice applies to models that have the factory-installed  
television-output feature.  
This product incorporates copyright protection technology that is protected by  
method claims of certain U.S. patents and other intellectual property rights owned  
by Macrovision Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or disassembly is  
prohibited.  
Trademarks  
The following terms are trademarks of Lenovo in the United States, other  
countries, or both:  
Lenovo  
Rescue and Recovery  
ThinkVantage  
Wake on LAN is a trademark of International Business Machines Corporation in  
the United States, other countries, or both.  
Microsoft and Windows are trademarks of Microsoft Corporation in the United  
States, other countries, or both.  
Intel, Celeron, Core, and Pentium are trademarks of Intel Corporation in the  
United States, other countries, or both.  
Linux is a trademark of Linus Torvalds in the United States, other countries, or  
both.  
Other company, product, or service names may be trademarks or service marks of  
others.  
66 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
A
diagnostic diskettes  
drives  
adapters  
E
B
C
changing  
H
computer  
I
installing  
connector  
installing options  
cover  
L
M
memory  
D
device drivers  
diagnostic  
modem commands  
diagnostic CD image  
mouse, cleaning  
© Lenovo 2005, 2006. Portions © IBM Corp. 2005.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
software (continued)  
system board  
N
O
operating system  
options  
T
U
P
updating  
password  
using  
V
power  
W
R
S
security  
selecting  
software  
68 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Number: 41X6122  
Printed in USA  
(1P) P/N: 41X6122  
Download from Www.Somanuals.com. All Manuals Search And Download.  

La Crosse Technology Weather Radio TX24U User Manual
Life Fitness Flat Panel Television M051 00K32 A084 User Manual
Lincoln Electric Welder TIG 375 User Manual
Linn Stereo Amplifier Twin Klimax User Manual
Lucent Technologies IP Phone MLX 10D User Manual
Madrigal Imaging Stereo Amplifier PX 600 User Manual
Makita Sander 9900B User Manual
Maytag Range CER3725AGW User Manual
Maytag Range W10321012A User Manual
Memorex Blu ray Player MVBD2520 User Manual