Life Fitness LCD Entertainment System
How To Replace the Main PC Board
Special service tools required: none
1. Disconnect the three cables from the back of the
console. The power cable and the coax cable are
screw-on connectors.
Antenna
Coax
Power
Cable
Cable
Tan 10-Pin Connector
(for remote control)
OR
Black 8-Pin Connector
(for in-console control)
2. Remove the four screws that secure
the TV console to the support frame.
3. Remove the TV console assembly.
M051-00K32-A084
Download from Www.Somanuals.com. All Manuals Search And Download.
Life Fitness LCD Entertainment System
How To Replace the Main PC Board - continued
7. Remove the four screws that secure the main PC board to the bracket.
8. Lift out the main PC board.
Note: For Version 1 units, remove and discard the static PCB and all attached cables.
9. Reverse steps 1 through 8 to install the new
main PC board. On Version 1 TVs, connect
Bracket
the remote cable to the 10-pin connector as
Main PC Board
shown in the diagram on the previous page.
On Version 2 TVs, reconnect all cables as
they were removed
10. To reprogram the channels, refer to the
operation manual.
3
M051-00K32-A084
Download from Www.Somanuals.com. All Manuals Search And Download.
|