Leica Lino
L360, L2P5, L2+, L2G+, L2, P5, P3
Download from Www.Somanuals.com. All Manuals Search And Download.
de
en
F
Charging / first-time use
Storage of L360 NiMH Batteries
•
Ensure that the product is stored in dry environ-
ment with a temperature range of 0°C to +20°C /
32°F to 68°F, in order to minimize the discharge
rate of the battery.
•
The battery must be charged prior to first use
because it is delivered with as low an energy
content as possible.
The permissible temperature range for charging is
between 0°C and +40°C/+32°F and +104°F. For
optimal charging we recommend charging the
batteries at a low ambient temperature of +10°C
to +20°C/+50°F to +68°F if possible.
It is normal for the battery to become warm
during charging.
I
•
E
•
•
Recharge batteries before longer storage
periods.
P
NL
DK
S
At the recommended storage temperature range,
batteries can be stored up to 6 months, after
which the batteries should be fully recharged.
After longer storage intervals, please recharge
batteries before use.
•
•
N
FIN
J
L360
Lino L360
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
1
LV
EST
SLO
SK
m
7h
1 Jack for battery charger
Leica Lino 757665i en
2
Start up
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Operation
6
4
7
Keypad and control elements
1 LASER key
2 PULSE/POWER SAVE MODE key
3 Lock switch
Lino L360
I
7
5
8
E
10
Lino L2P5
P
6
1
11
2
9
NL
DK
S
Display
5
1
9
2
8
4 Laser crossline
5 Horizontal laser line
6 Vertical laser line
7 Locked
8 Pulse/Power save mode ON
9 Battery voltage too low
AT Plumb and crossline intersection point
AK Plumb point
N
FIN
J
7
5
6
1
7
5
6
1
CN
ROK
PL
HR
H
+
+
Lino L2
Lino L2G
8
AL Laser switched on
2
9
9
60
Lino L3
RUS
CZ
GR
LT
Leica Lino L2
7
8
9
6
5
4
Leica Lino P3
9
12
1
LV
EST
SLO
SK
m
2
1
3
Leica Lino 757665i en
3
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Switching on/off
Lino L360, L2P5, L2+, L2G+, and L2:
Lino P3 and Lino P5:
•
ON: Briefly press the LASER key 1.
•
ON: Move the Lock switch 3 to the right.
•
OFF: Press and hold down the LASER key 1.
•
OFF: Move the Lock switch 3 to the left.
I
E
Laser functions
P
Pressing the LASER key 1 activates the following laser functions:
NL
DK
S
L360
L360
L2P5
L2P5
Action
L2
L2+
L2G+
P3
P5
not in Lock
mode
in Lock
mode
not in Lock
mode
in Lock
mode
N
FIN
J
horizontal
only
horizontal
only
horizontal
horizontal
horizontal
1x
2x
3x
all 3 points all 5 points
only plumb only plumb
and vertical horizontal and vertical horizontal and vertical and vertical and vertical
CN
ROK
PL
HR
H
only
horizontal
all lines and
points
only
horizontal
only
horizontal
only
horizontal
only vertical
only vertical
points
points
plumb point
and right/left
only vertical again as 1x
all points
again as 1x only vertical only vertical only vertical again as 1x
RUS
CZ
GR
LT
only plumb
point
4x
5x
again as 1x
-
-
-
-
-
again as 1x again as 1x again as 1x
-
-
again as 1x
-
again as 1x
-
-
-
LV
EST
SLO
SK
m
Leica Lino 757665i en
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Operation
TR
de
en
F
Self-levelling and Lock functions
Pulse/Power save mode
The instrument automatically levels itself within the
specified grade range (Refer to "Technical data") .
Press the Lock switch 3 in order to transport or tilt
the instrument beyond the self-levelling range. When
locked, the pendulum is fixed and the self-levelling
function is deactivated.
(only Lino L360, L2P5, L2+, and L2)
The instrument is fitted with a Power save mode. If
particularly good visibility of the laser line is not
necessary and you wish to save energy, you can
switch the Pulse mode on and off by pressing the
PULSE/POWER SAVE MODE key 2.
I
E
P
To be able to detect the laser lines over long
distances (> 15 m) or in unfavourable lighting condi-
tions, a laser detector can be used. The detector is
able to locate the laser beam in Pulse mode, even
over long distances.
NL
DK
S
N
(Laser detector refer to accessories)
FIN
J
The L2G+ operates in a continuously pulsed
mode to optimize battery life and visibility, and as a
consequence the L2G+ has no pulse/Power save
button.
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665i en
5
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Applications
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665i en
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Operation
TR
How to use the wall mount bracket:
de
en
F
0
36
no
L
Li
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665i en
7
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Checking the accuracy of the Leica
Lino
Check the accuracy of your Leica Lino regu-
I
larly and particularly before important measuring
E
tasks.
A1
A2
P
B1
B2
Checking the accuracy of the levelling
NL
DK
S
5 m
Then place the instrument at the same elevation as
close as possible to wall A and again mark the hori-
zontal laser line or the laser point on wall A (-> A2) .
Rotate the instrument by 180° again and mark the
laser on wall B (-> B2). Measure the distances of the
marked points A1-A2 and B1-B2. Calculate the differ-
ence of the two measurements. If the difference
does not exceed 2 mm, then the Leica Lino is within
tolerance.
N
FIN
J
B1
A1
CN
ROK
PL
HR
H
2.5 m
2.5 m
Set the instrument on a tripod half-way between two
walls (A+B) that are approx. 5 m apart.
| (A1 - A2) - (B1 - B2) | 2 mm
Place the Lock switch 3 in the "Unlocked" (
)
RUS
CZ
GR
LT
position.
Direct the instrument at wall A and switch on the
instrument. Activate the horizontal laser line or laser
point and mark the position of the line or the point
on wall A (-> A1).
Rotate the instrument by 180° and mark the hori-
zontal laser line or the laser point in exactly the same
way on wall B (-> B1).
LV
EST
SLO
SK
m
Leica Lino 757665i en
8
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
Checking the accuracy of the horizontal line Checking the accuracy of the vertical line:
de
en
F
(only Lino L360, L2P5, L2+, L2G+, and L2)
(only Lino L360, L2P5, L2+, L2G+, and L2)
I
E
max.
3 mm
P
max.
3 mm
NL
DK
S
5 m
1.5 m
N
FIN
J
Place the Lock switch 3 in the "Unlocked" (
)
Place the Lock switch 3 in the "Unlocked" (
)
position.
position.
CN
ROK
PL
HR
H
Position the instrument approx. 5 m away from the
wall. Direct the instrument at the wall and switch on
with the LASER key 1. Activate the laser line with the
LASER key 1 and mark the intersection point of laser
crosshairs on the wall.
Swivel the instrument to the right and then to the
left. Observe the vertical deviation of the horizontal
line from the marking. If the difference does not
As reference, use a plumb-bob and attach it as close
as possible to an approx. 3 m high wall.
Position the instrument at a distance of approx.
1.5 m from the wall at an elevation of approx. 1.5 m.
Direct the instrument at the wall and switch on with
the LASER key 1. Activate the laser line with the
LASER key 1. Rotate the instrument and align it with
the bottom of the plumb line. Now read off the
RUS
CZ
GR
LT
exceed 3 mm, then the Leica Lino is within tolerance. maximum deviation of the laser line from the top of
the plumb line. If the difference does not exceed
3 mm, then the Leica Lino is within tolerance.
LV
EST
SLO
SK
m
Leica Lino 757665i en
9
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
Rotate the instrument by 180° so that it points in the
opposite direction 2 to direction 1. Adjust the instru-
ment so that the laser beam hits point A1 exactly. If
point B2 is no further than 2 mm away from point B1,
then the Leica Lino is within tolerance.
Checking the accuracy of the vertical plumb
points:
de
en
F
(only Lino P3, Lino P5 and Lino L2P5)
Place the Lock switch 3 in the "Unlocked" (
position.
)
I
Should your Leica Lino be outside of the spec-
ified tolerance, please contact an authorised dealer-
ship or Leica Geosystems.
E
Checking the upper plumb point:
P
B1
B2 max. 2 mm
NL
DK
S
Display notices
1.5 m
Falling below or exceeding the permissible
temperature range:
N
The laser switches off and all symbols flash.
Outside of the self-levelling range:
The laser switches off and the symbol of the selected
function indicator light starts to flash (for L2), or the
line or point will begin to flash on and off and the
symbol of the selected function indicator light begins
to flash (for P3, P5, L2+, L2G+, and L2P5).
Pendulum locked:
1
2
FIN
J
A1
CN
ROK
PL
HR
H
Checking the lower plumb point:
A1
1
(only Lino L360, L2P5, L2+, L2G+, and L2)
The laser beam is not levelled and the Lock symbol 7
lights up.
2
RUS
CZ
GR
LT
1.5 m
max. 2 mm
B2
B1
Set up the laser on its tripod or wall mount bracket
near point A1 at a minimum distance of 1.5 m from
point B1. The horizontal laser is aligned in direction 1.
Mark the laser points A1 and B1 with a pin.
LV
EST
SLO
SK
m
Leica Lino 757665i en
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
TR
de
en
F
Care and advice on operation
Warranty
Do not immerse the instrument in water. Wipe off dirt
with a damp soft cloth. Do not use aggressive
cleaning agents or solvents. Treat the instrument
with the same care that you would apply to binocu-
lars or a camera.
Lifetime Manufacturer's Warranty
Warranty coverage for the entire usage time of the
product according to Leica Geosystems International
Limited Warranty. Free of charge repair or replace-
ment for all products that suffer defects as a result
of faults in materials or manufacturing, for the entire
life of the product.
I
E
Dropping or violent shaking of the instrument may
damage it. Check the instrument for any damage
before using it. Check the levelling accuracy of the
instrument regularly.
P
NL
DK
S
3 Years no Cost
Guaranteed service should the product become
defective and require servicing under normal condi-
tions of use, as described in the user manual, at no
additional charge.
Transport
N
To safely transport the instrument, set the Lock
FIN
J
switch 3 to "Locked" (
).
CN
ROK
PL
HR
H
To receive the "3 years no cost" period, the product
registration within 8 weeks of the purchase date. If
the product is not registered, a "2 years no cost"
period applies.
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665i en
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
TR
de
en
F
Technical data
L360
L2P5
L2
L2+
up to 30 m*
L2G+
P3
P5
Range
Range with detector
Levelling accuracy @ 5 m
Self-levelling range
up to 60 m
-
I
1.5 mm
1 mm
1.5 mm
E
3.5° 0.5°
-
4° 0.5°
Accuracy of plumb points @ 5 m
Accuracy of horizontal line @ 5 m
1.5 mm
-
1.5 mm
P
1.5 mm
-
NL
DK
S
Vertical accuracy @ 3 m
0.75 mm
1.5 mm
-
line length
360°
Beam divergence
<180°
4
<120°
2
<180°
-
-
(horizontal)
Number of laser points
Number of laser lines
-
-
3
5
N
vertical,
horizontal,
up, down,
right, left
FIN
J
up, down,
forward,
right, left
vertical,
up, down,
forward
Beam direction
vertical, horizontal
horizontal
CN
ROK
PL
HR
H
515-520 nm,
laser class 2
Laser type
Batteries
635 nm, laser class 2
635 nm, laser class 2
NiMH battery pack
(rechargeable)
Type AA
4 x 1.5 V
Type AA
3 x 1.5 V
Type AA
Type AA
3 x 1.5 V
4 x 1.5 V
IP 54
Protection class spray water / dust
Operating temperature
Storage temperature
IP 65
-10°C to 40°C
0°C to 40°C
-10°C to 40°C
-25°C to 70°C
117.8 x
131.7 x 145 x
96.2 mm
96 x 91 x
117.8 x 130.7 x
75.4 mm
RUS
CZ
GR
LT
Dimensions (H x D x W)
130.7 x
99.1 x 108.1 x 59.3 mm
54 mm
75.4 mm
1009 g
Weight without batteries
Tripod thread
370 g
321 g
370 g
1/4"
370 g
310 g
320 g
(with batteries)
maximum relative humidity 80 % for temperatures up to 31 °C
Humidity range
decreasing linearly to 50 % relative humidity at 40 °C
LV
EST
SLO
SK
m
Altitude
Intended environment
* depending on lighting conditions
< 3500 m
Primarily indoor use
All rights reserved for changes (on drawings, descriptions and technical data).
Leica Lino 757665i en
12
Technical data
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
L360
L2P5
L2
L2+
up to 100 ft*
L2G+
P3
P5
de
en
F
Range
Range with detector
up to 200 ft
-
Levelling accuracy @ 16 ft
Self-levelling range
Accuracy of plumb points @ 16 ft
Accuracy of horizontal line @ 16 ft
Vertical accuracy @ 10 ft line length
1/16 “
0.04 in
1/16 “
3.5° 0.5°
-
4° 0.5°
I
1/16 “
-
-
1/16 “
-
-
E
1/16 “
P
1/32 “
<180°
1/16 “
360°
NL
DK
S
Beam divergence
<120°
2
<180°
-
-
(horizontal)
Number of laser points
Number of laser lines
-
4
3
5
vertical,
horizontal,
up, down,
right, left
up, down,
forward,
right, left
N
vertical,
up, down,
forward
Beam direction
vertical, horizontal
horizontal
FIN
J
515-520 nm,
laser class 2
Laser type
635 nm, laser class 2
635 nm, laser class 2
Type AA, 3 x 1.5 V
CN
ROK
PL
HR
H
NiMH battery
pack
Type AA
4 x 1.5 V
Type AA
3 x 1.5 V
Type AA
Batteries Type
4 x 1.5 V
(rechargeable)
Protection class spray water / dust
Operating temperature
Storage temperature
IP 65
IP 54
14°F to +104°F
32°F to +104°F
14°F to +104°F
-13°F to +158°F
5.19 x 5.71 x
3.79 in
14.6 x
3.8 x 3.6 x
14.6 x
Dimensions (H x D x W)
3.9 x 4.25 x 2.3 in
RUS
CZ
GR
LT
5.1 x 2.95 in
2.1 in
5.1 x 2.95 in
35.6 oz (with
Weight without batteries
Tripod thread
13.1 oz
11.3 oz
13.1 oz
13.1 oz
10.9 oz
11.3 oz
batteries)
1/4"
maximum relative humidity 80 % for temperatures up to 87.8°F
decreasing linearly to 50 % relative humidity at 104°F
Humidity range
LV
EST
SLO
SK
m
Altitude
Intended environment
* depending on lighting conditions
< 11,400 ft
Primarily indoor use
All rights reserved for changes (on drawings, descriptions and technical data).
Leica Lino 757665i en
13
Technical data
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
NiMH battery pack L360
(rechargeable, Art.No.: 790532)
Permitted use
•
Projection of horizontal and vertical laser lines
and laser points
Input voltage
Input current
Charging time
7.5 V
1 A
I
Prohibited use
E
•
•
•
Using the product without instruction
Using outside the stated limits
P
7 h
NL
DK
S
Deactivation of safety systems and removal of
explanatory and hazard labels
Safety instructions
The person responsible for the instrument must
ensure that all users understand these directions and
adhere to them.
•
Opening of the equipment by using tools (screw-
drivers, etc.), as far as not specifically permitted
for certain cases
N
FIN
J
•
•
•
Carrying out modification or conversion of the
product
Deliberate dazzling of third parties; also in the
dark
Symbols used
CN
ROK
PL
HR
H
The symbols used have the following meanings
WARNING:
Indicates a potentially hazardous situation or
an unintended use which, if not avoided, may result
in death or serious injury.
ƽ
Inadequate safeguards at the surveying site.
Limits of use
CAUTION:
Refer to section "Technical data".
RUS
CZ
GR
LT
ƽ
Indicates a potentially hazardous situation or
The Leica Lino is designed for use in areas perma-
an unintended use which,if not avoided, may result in
minor injury and/or appreciable material, financial
and environmental damage.
nently habitable by humans. Do not use the product
in explosion hazardous areas or in aggressive envi-
ronments.
Important paragraphs which must be adhered
to in practice as they enable the product to be used
in a technically correct and efficient manner.
LV
EST
SLO
SK
m
Leica Lino 757665i en
14
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
WARNING:
de
en
F
ƽ
Areas of responsibility
Empty batteries must not be disposed of with
Responsibilities of the manufacturer of the original
equipment Leica Geosystems AG, CH-9435 Heerbrugg
(for short Leica Geosystems):
household waste. Care for the environment and take
them to the collection points provided in accordance
with national or local regulations.
I
Leica Geosystems is responsible for supplying the
product, including the User Manual in a completely
safe condition.
Leica Geosystems is not responsible for third
party accessories.
The product must not be disposed of with
the household waste.
Dispose of the product appropriately
in accordance with the national regulations
in force in your country.
E
P
NL
DK
S
Responsibilities of the person in charge of the
instrument:
The person in charge of the instrument has the
following duties:
Always prevent access to the product by
unauthorised personnel.
N
Product specific treatment and waste management
information can be downloaded from the Leica
Geosystems home page at
received from the Leica Geosystems dealer.
FIN
J
•
•
To understand the safety instructions on the
product and the instructions in the User Manual.
To be familiar with local safety regulations
relating to accident prevention.
CN
ROK
PL
HR
H
WARNING
ƽ
Hazards in use
Using a battery charger not recommended by
Leica Geosystems can destroy the batteries. This can
cause fire or explosions.
CAUTION:
ƽ
Watch out for erroneous measurements if the
RUS
CZ
GR
LT
instrument is defective or if it has been dropped or
has been misused or modified.
Precautions:
Only use chargers recommended by Leica Geosys-
tems to charge the batteries.
Carry out periodic test measurements.
Particularly after the instrument has been subject to
abnormal use, and before, during and after important
measurements.
LV
EST
SLO
SK
m
Refer to section "Checking the accuracy of the Leica
Lino".
Leica Lino 757665i en
15
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
is encouraged to try to correct the interference by
one or more of the following measures:
de
en
F
Electromagnetic Compatibility
(EMC)
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
WARNING:
ƽ
I
The Leica Lino conforms to the most stringent
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help
E
requirements of the relevant standards and regula-
tions. Yet, the possibility of it causing interference in
other devices cannot be totally excluded.
P
NL
DK
S
FCC statement (applic. in U.S.)
WARNING:
ƽ
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause unde-
sired operation.
Changes or modifications not expressly
approved by Leica Geosystems for compliance could
void the user’s authority to operate the equipment.
N
FIN
J
CN
ROK
PL
HR
H
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
RUS
CZ
GR
LT
However, there is no guarantee that interference will
not occur in a particular installation.
LV
EST
SLO
SK
m
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the user
Leica Lino 757665i en
16
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Laser classification
The Leica Lino produces visible laser beams, which are emitted from the instrument:
I
E
P
NL
DK
S
L
i
n
o
L
3
6
0
N
FIN
J
CN
ROK
PL
HR
H
It is a Class 2 laser product in accordance with:
WARNING:
ƽ
Looking directly into the beam with optical aids
•
IEC60825-1 : 2007 "Radiation safety of laser
products"
RUS
CZ
GR
LT
(e.g. binoculars, telescopes) can be hazardous.
•
Lino L2G+: IEC 60825-1:2014
CAUTION:
ƽ
Looking into the laser beam may be hazardous
Laser Class 2 products:
to the eyes.
Do not stare into the laser beam or direct it towards
other people unnecessarily. Eye protection is
normally afforded by aversion responses including
the blink reflex.
LV
EST
SLO
SK
m
Leica Lino 757665i en
17
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
de
en
F
Labelling
L2P5
Laser Radiation
Laser Radiation
Do not stare into the beam
Do not stare into the beam
I
Laser class 2
Laser class 2
in acc. with IEC 60825-1:2007
in acc. with IEC 60825-1:2007
E
Maximum radiation power: <1.0mW c.w.
Maximum radiation power: <1.0mW c.w.
Emitted wavelength:
Beam divergence:
620-690nm
180°
Emitted wavelength:
Beam divergence:
620-690nm
<1.5 mrad
P
<
NL
DK
S
L2
Laser Radiation
Do not stare into the beam
Laser class 2
N
in acc. with IEC 60825-1:2007
Maximum radiation power: <1.0mW c.w.
FIN
J
Emitted wavelength:
Beam divergence:
620-690nm
<120°
CN
ROK
PL
HR
H
L2+
L2G+
L360
Laser Radiation
Laser Radiation
Do not stare into the beam
Do not stare into the beam
Laser class 2
Laser class 2
in acc. with IEC 60825-1:2014
in acc. with IEC 60825-1:2007
Maximum radiation power:
Emitted wavelength:
Beam divergence:
<0.7mW
Maximum radiation power: <1.0mW c.w.
515-520nm
Emitted wavelength:
Beam divergence:
620-690nm
<180°
Pulse Repetition frequency:
Pulse duration:
10 kHz
50 μs
<
180°
RUS
CZ
GR
LT
P3/P5
Laser Radiation
Laser Radiation
Do not stare into the beam
Do not stare into the beam
Laser class 2
Laser class 2
in acc. with IEC 60825-1:2007
in acc. with IEC 60825-1:2007
Maximum radiation power: <1.0mW c.w.
Maximum radiation power: <1.0mW c.w.
LV
EST
SLO
SK
m
Emitted wavelength:
Beam divergence:
620-690nm
Emitted wavelength:
Beam divergence:
620-690nm
<1.5 mrad
<360°
Leica Lino 757665i en
18
Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TR
Position of label:
de
en
F
L
i
n
o
I
L
3
6
0
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
Leica Lino 757665i en
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
TR
Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being
equipped with a quality system which meets the International Standards of
Quality Management and Quality Systems (ISO standard 9001) and
Environmental Management Systems (ISO standard 14001).
Copyright Leica Geosystems AG, Heerbrugg,
Switzerland 2014
Original text (757665i EN)
Leica Geosystems AG
CH-9435 Heerbrugg
(Switzerland)
Download from Www.Somanuals.com. All Manuals Search And Download.
|