Contents
Camera Specifications
• Weatherproof IR dome camera
• Mounting screws x 4
Image Sensor
Video Format
Effective Pixels
Resolution
1/3” Sony Super HAD™ II
NTSC
• 60ft. BNC / power extension cable
• BNC female / RCA male adapter
• Power adapter
SUPER RESOLUTION WEATHERPROOF
NIGHT VISION DOME CAMERA
H: 768 V: 494
600 TV Lines
2:1 Interlace
Internal
Scan System
Sync System
S / N Ratio
Iris
QUICK START GUIDE
WARNING: A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-
conforming power supply can damage this product and voids the
warranty.
English Version 1.0
50dB (AGC Off)
AES
AES Shutter Speed
Min. Illumination
1/60 ~ 1/100,000 sec.
Features
0.2 Lux without IR LED
0 Lux with IR LED
• Advanced Sony Super HAD™ II image sensor
• Video image processor produces sharp and clear video at
600 TV lines of resolution
Video Output
Composite 1.0Vpp @ 75ohm
3.6mm F2.0 / Fixed
80°
• Night vision up to 50ft. (15m) away in total darkness*
• ClearNight imaging technology ensures clear night vision and
improves recording efficiency up to 30%
Lens / Lens Type
FOV (Diagonal)
• 3.6mm wide angle lens for wide area coverage (80° FOV)**
• IP66 rated aluminum housing for indoor / outdoor
installations***
Termination
BNC Type
IR LED Qty / Type
Night Vision Range*
Power Requirement
Power Consumption
Operating Temp. Range
Operating Humidity Range
Environmental Rating**
Weight (including stand)
14 pieces / 850nm
50ft. / 15m
Disclaimers:
* Infrared illumination range under ideal conditions. Actual range and clarity may vary depending on
scene / object reflection and camera application.
12V DC 10%
Max. 250mA (w / IR)
14° ~ 122°F / –10° ~ 50°C
< 90% RH
** Field of View, diagonal.
*** Not intended for submersion in water. Installation in a sheltered location recommended.
Warning/Caution
• Read this guide carefully and keep it for future reference
• Follow all instructions for safe use of the product
• Use the camera within given temperature, humidity, and
voltage levels noted in Camera Specifications
• Do not disassemble the camera
IP66
0.8lbs. / 0.4kg
* IR Illumination Range under ideal conditions. Objects at or beyond this range may be partially or
completely obscured, depending on the camera application.
** Not intended for submersion in water. Installation in a sheltered location recommended.
• Do not point the camera directly towards the sun or a source of
intense light
Dimensions
• Use only the supplied regulated power supply. Use of a non-
regulated, non-conforming power supply can damage this
product and voids the warranty
95mm / 3.8"
• The supplied extension cable is rated for surface mounting only
• Cables for in-wall / floor-to-floor installations are sold
separately
88mm / 3.5”
Installation Tips
FOR SUPPORT AND INFORMATION,
• Point the camera where there is the least amount of obstructions
(i.e. tree branches)
VISIT WWW.LOREXTECHNOLOGY.COM
• Install the camera in a location that is difficult for vandals to
Product Information
Specification Sheets
Software Upgrades
Firmware Upgrades
reach
• Secure cabling so that it is not exposed or easily cut
• Camera rated for outdoor use. Installation in a sheltered
location recommended
User Manuals
LDC6051
Quick Start Guides
Copyright © 2011 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE
Download from Www.Somanuals.com. All Manuals Search And Download.
|