WASHING MACHINE
SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLES
CORRECTLY BEFORE OFFERING SERVICE.
MODEL : WD-14124(6)RD
WD-12124(6)RD
WD-10124(6)RD
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SPECIFICATION
ITEM
WD-14124(6)RD/WD-12124(6)RD/WD-10124(6)RD
POWER SUPPLY
PRODUCT WEIGHT
WASHING
220V-240V~, 50HZ
71kg
140W
ELECTRICITY
SPIN
FAN MOTOR
DRAIN MOTOR
WASH HEATER
DRY HEATER
WASH
300W
CONSUMPTION
25W
40W
2000W
2100W
45rpm
REVOLUTION
SPEED
SPIN
WD-14124(6)RD
400/800/1000/1400 rpm
400/800/1000/1200 rpm
400/600/800/1000 rpm
WD-12124(6)RD
WD-10124(6)RD
OPERATION WATER PRESSURE
CONTROL TYPE
0.3-10kgf/cm2 (30-1000kPa)
Electronic
WASH CAPACITY
DRY CAPACITY
7.0kg (Cotton)
3.5kg (Cotton)
DIMENSION
600mm(W) 600mm(D) 850mm(H)
WASH PROGRAM
RINSE
Cotton, Cotton-Eco, Synthetic, Delicate, Wool, Hand Wash, Quick 30
Normal / Super / Rinse Hold
Manual
DOOR SWITCH TYPE
WATER LEVEL
8 steps (by sensor)
From 3 hours to 19 hours
Adapted
RESERVATION
SENSING OF THE LAUNDRY AMOUNT
FUZZY LOGIC
Adapted
DISPLAY OF THE REMAINING TIME
ERROR DIAGNOSIS
POWER AUTO OFF
CHILD LOCK
Adapted
10 items
Adapted
Adapted
AUTO RESTART
Adapted
TIME SAVE
Adapted
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. FEATURES & TECHNICAL EXPLANATION
2-1.FEATURES
Automatic process from washing to drying.
Automatic process from washing to drying can be
selected easily.
Washing capacity : 7 kg (Cotton)
Drying capacity : 3.5 kg (Cotton)
More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water
temperature, and then determines the optimum water level and
washing time to minimize energy and water consumption.
Direct Drive system
The advanced Brushless DC motor rotates the Drum directly
without belt and pulley.
Child-Lock
The Child-Lock system has been developed to prevent
Wash Rinse
children from pressing any button to change the program
during operation.
Low noise speed control system
By sensing the amount of load and balance, evenly distributes
load to minimize the spinning noise level.
Auto Restart
Although the washing machine is turned off by a power failure, it
restarts automatically in its stopped process when power is
supplied again. And it will be the same when the machine
unplugged in operation is plugged in again.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.
water
temperature
washing time
the best
washing
performance
selected
FUZZY
LOGIC
washing
rinsing time
temperature
spin rhythm, time
laundry
amount
SENSING
PROCESSING
DETERMINATION
EFFECT
2-3.WATER LEVEL CONTROL
This model adopts a pressure sensor which can sense the water level in the tub.
Water supply is stopped when the water level to the preset level, then washing program proceeds.
Spinning does not proceed until the water in the tub reduces to a certain level.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. PARTS IDENTIFICATION
Power plug
If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agents
or a similarly qualified person in
order to avoid a hazard.
Drawer
(For detergent and
fabric softener)
Control panel
Drain hose
Door
Lower cover
Adjustable feet
Drum
Drain pump filter
Drain plug
Lower cover cap
ACCESSORIES
Spanner
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. INSTALLATION
Before servicing ask troubles of customers
Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O Kor NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE
ADJUST THE
HORIZONTAL
ON FLAT AND FIRM SURFACE
Remove the transit bolts
Turn the leveling feet to
(3EA: )with supplied spanner.
set the appliance horizontally.
Keep the transit bolts and
spanner for future use.
Insert the 3 caps
provided into the hole
Low
High
1
The appliance goes up by
rotating the feet clockwise.
2
The appliance come down by
rotating the feet counter
clockwise.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
Make sure that the hose is not twisted.
Avoid submerging the end of the hose.
The drain hose should be placed under 100cm from the floor.
CONNECT POWER PLUG
Avoid connecting several electric devices,
It may be the cause of the fire.
Connect the power plug to the wall outlet.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TEST OPERATION
Preparation for
washing.
Press the POWER button.
Press the Start/Pause
button.
/
Start Pause
Power
Connect the power plug to
the outlet.
Connect the inlet hose.
In case of Coloreds program.
Check the water heating.
Check automatic reverse
turn.
Check the water supply.
Press the Temp. button
and the present temperature will
be displayed.
Check if the drum rotates
clockwise and counterclockwise.
Check if water is supplied
through the detergent dispenser.
Check drain and spin
Power off and open the
door
Water removal
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
Power
Power off and then power on.
Check if the door can be
opened after 3 minutes.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. OPERATION
Delay finish
Child lock
• Press the button when reservation washing is
needed.
• Once Child-Lock is set, and canceled by pressing both
[Wash] and [Rinse] simutaneusly once
Child lock is set. Once Chold Lock is set, all buttons
are iroperable.
• The Child-Lock system can be set at any time even
including during Power-Off, on Pause and operation.
It is automatically cancelled when an operational error
occurs and when the cycle ends.
• When the button is pressed, [
is displayed.
]
A maximum delay of [
can be set.
] hours
• Each press advances time delay by one hour.
• Use ON/OFF button to cancel [Time delay].
• When power is off, the LED indicates [
] only.
During operation, or when the programme is paused
the LED will indicate [
] and the remaining time.
Time Delay
Time Save
Delicate
Synthetic
Cotton
Wool
Door Lock
Time Left
Hand
Wash
Time Add
95
60
40
30
1400
1000
800
400
No Spin
Auto
Big
Pre
Rinse Hold
Super
Quick-
30
Cotton-Eco
Small
Cold
Normal
Main
Program
Dry
Wash Rinse
Spin
Temp.
/
Start Pause
Start/Pause button
Wash program selector
• Use the button to start or pause wash cycle.
•The power turns off automatically in 4 minutes
after the pause button is pressed.
• 7 programs can be selected depending on the
type of the laundry.
• By turning the dial,
• Press the button to change the program.
[Cotton
Synthetic
Delicate
Wool
Hand Wash
Quick 30 Cotton-Eco]
can be selected
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Save
LED display
• This option can be
used to reduce the
time of a wash
program.
• This function in not
available with
• Display the remaining time (Hour : Minute) to finish.
• In case of abnormal operation, error indications are displayed.
,
,
)
(
,
,
,
,
,
,
,
• See trouble shooting guide.
• When drying cycle is completed,
the Multi display.
[COOL DOWN] is displayed on
Quick 30 program.
• The COOL DOWN is setting automatically when a drying cycle is complete.
• When you are not remove a load of clothes from
the dryer as soon as it stops, wrinkles can form.
• The COOL DOWN operating periodically tumbles, rearranges and fluffs
the load to avoid wrinkles without heat for up to 4 hours.
• The
message will continue to display until the clothes are removed
or the START/PAUSE button is pressed.
Door lock display
• It shows whether the door can be opened or not during
the washing.
• If the lamp is off, the door can be opened .
Dry selector
ON/OFF button
• Dry programs can be selected
by pressing the [Dry] button.
• By pressing the button,
• Press the button to turn
power on and off.
Power
[Auto
Big
Time Add
Small ] can be selected.
Water temperature selector
For manual wash, rinse and spin
• Press the button to select water temperature.
• The water temperature is selected
• Use these buttons to change washing
method, rinse times, spinning speed.
• When lamp is off, no selection has been
made.
• Prewashing is available for Cotton,
Cotton-Eco, Synthetic program.
[60°C
95°C
Cold 30°C 40°C]
during cotton program.
• 95°C is selected only for cotton program.
• By pressing the button during operating the
washer, the present temperature is displayed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6. WIRING DIAGRAM / PROGRAM CHART
DISPLAY
PWB
MAIN PWB
NA
WH
RD
RD
NA
RD
SKY BL WH
RD
WH
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 1 2 3 4 5 6
1 2 3 1 2 3 4 5 6
2 1 3
2 1 3
2 3 1 4
2 3 1 4
2
2
4
4
3 1
3 1
3 2 1
3 2 1
1
1
3 2 1
3 2 1
1 2 3
1 2 3
WH BK YL
OR BL BN GY PK
BL RD YL
BL RD YL BK
BK
BL
BL YL RD
BL
BN
VL WH
S
K
Y
BK RD
BL WH GY YL
YL BN
/
/
/
/
/
/
/
/
/
/
/
WH
WH RD
WHWH
RD BK WH BK
RD YL
GN
/
YL
2
3
1
DRY
HEATER
WASHING
HEATER
M
P
R
E
D
R
Y
INLET
VALVE
A
I
NOISE
FILTER
N
WH/RD
WH
WH
WH
1 2 3
1 2 3
1 2 3 4 5
1 2 3 4 5
BK
GN
/
WH
/RD
GN
/
YL
U
V
W
YL
YL
BL
BN
BK
1 2 3
1 2
1 2
1 2
THER-
MOSTAT
NA
WH
1 2
1 2 3
RD
NA
C P
(S)
(S)
(G)
P
C BK
P
2 1
FAN MOTOR
WH C
WH
WH
2 1
MOTOR
RD
BK
THERMISTOR
(Dry Duct Dry H/T)
THERMISTOR
(Tub)
PRESSURE
SENSOR
YL
/
BK RD
BN
/
RD
RD
YL
3 2 1
3 2 1
3 2 1
n
PIN CONNECTOR NUMBER
VL
NA
6 5 4
POWER
CORD
TERMINAL+HOUSING (#250)
EARTH TERMINAL
DRAIN
MOTOR
WIRE COLOR: BASE/LINE
DOOR LOCK S/W
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7. TROUBLE SHOOTING
7-1.BEFORE SVC CHECKING
Be careful of electric shock or disconnecting the parts while trouble shooting.
Voltage of each terminal in 220-240V~ and DC while applying an electric current.
7-2.QC TEST MODE.
Pressing Rinse, and Spin button simultaneously.
Power supply ON with pressing upper two button.Then buzzer sound twice.
Press the Start/Pause button as follows.
Press the Start/Pause button more 4 times until stop spinning
Pressing number of
Checking Point
Display Status
Start/Pause button
None
1 time
All lamps turn on
Clockwise spin(right)
Drum rpm(About 40~52)
Drum rpm(About 70~90)
Drum rpm(About 90~110)
Water level frequency(25~65)
Water level frequency(25~65)
Water level frequency(25~65)
Drum rpm(About 40~52)
Water temperature
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
Low speed Spin
High speed Spin
Inlet valve for pre-wash operation
Inlet valve for main-wash operation
Inlet valve for dry operation
Counterclockwise spin(left)
Heater is in operation for 3 sec.
Draining pump operation
Dry operation for 6 minutes
Water level frequency
Auto off operation after 6 minutes
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY
Press the Rinse and Spin button simultaneously.
The digits means water level frequency(10-1
-1
)
ex) 241 : Water level frequency = 241 10
=24.1
7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR
AT OPERATING CONDITION.
ꢀꢀThermistor in tub : Press the [WATER TEMP] button.
ꢀꢀThermistor in dry duct : Press the [DRY] button.
ꢀꢀThermistor in condensing duct : Press the [SPIN] and [DRY] button simultaneously.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
7-5.ERROR DISPLAY.
If you press the Start/Pause button in error condition, any error except ‘ ’ will disappear and the
machine will change into pause status.
In case o
if the error is not resolved within 20 sec., and in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in case o
, power will not be turned off.
ERROR
SYMPTOM
CAUSE
WATER INLET
• Not reached to the water level(2 level)within 4
minutes after water supplied or not reached to
the preset water level within 25 minutes.
1
ERROR
DRAIN ERROR
• Not fully drained within 5 minutes.
2
OVERFLOW
• Water is over flowing(over 8 level).
3
ERROR
¡ If
is displayed, drain pump operates to
drain water automatically.
SENSOR PRESSURE
• The sensor pressure switch is out of order.
4
S/W ERROR
• In case of operating the reservation function or
the other function with door opened. Close the
door, then the error display is resolved.
• The door switch is out of order.
DOOR OPEN
ERROR
5
• The appliance is tilted.
6
7
IMBALANCE
ERROR
• Laundry is gatherd to one side.
• The THERMISTOR is out of order.
HEATING
ERROR
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR SYMPTOM
CAUSE
• MAIN PWB ASSEMBLY is out of order
Replace the MAIN PWB ASSEMBLY
8
CURRENT
ERROR
• Winding in the STATOR ASSEMBLY is short-circuited.
Replace the STATOR ASSEMBLY
• “
” is dispplayed during a high spin
Replace the LEAD WIRE ASSEMBLY (MOTOR)
• The connector in the LEAD WIRE ASSEMBLY is not connected to
the connnector of STATOR ASSEMBLY
Reconnect or repair the connector
MOTOR
ERROR
9
• The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY
• The Dry Heater is out of order
DRY
10
Replace the Dry Heater
HEATOR
ERROR
• The Connector of the Dry Heater is not connected properly to the
connector in the Main PWB ASSEMBLY
Reconnect or repair the connector
• The Dry fan motor is out of order
Replace the fan Motor.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ERROR DIAGNOSIS AND CHECK LIST
8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION
SYMPTOM
GUIDE FOR SERVICE CALL
NO POWER
Is the power plug connected firmly to
220-240V~ outlet?
Power failure? or Breaker opened?
Visit to check
Water inlet trouble
Is "
" displayed?
Is the tap opened?
Is the tap frozen?
Is the water supply shut-off?
Clean the filter of
inlet valve
Is filter in the inlet valve clogged with
foreign material?
Visit to check
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPTOM
GUIDE FOR SERVICE CALL
• Door does not open
• Error displayed on
the program
Started with door opened?
YES
Close the door
NO
Visit to check
.
Check if the door switch is O K.
• DRAIN TROUBLE
Is "
" displayed?
YES
Is the debris filter clogged with foreign
material such as pin, coin and etc.?
Clean up
the filter.
YES
NO
Is the drain hose frozen with water,
kinked or crushed?
NO
Visit to check
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPTOM
GUIDE FOR SERVICE CALL
Is low-sudsing detergent for the drum
Suds overflow from the
appliance.
washing machine used?
(In this condition, wash and
spin do not operate
normally)
LOW-SUDSING
Is the proper amount of detergent used
as recommended?
Recommend to reduce the using amount
of detergent.
This appliance has the automatic suds sensing function which
operates under much suds condition for good rinse and
preventing overflow.
When much suds are sensed, suds removing function such as
drain, water input and pause will operate without rotating the
drum.
No effect of softener
Is softener put in the correct compartment of
Compartment for
the drawer?
softener
Is the drawer closed during wash?
Is the softener cap clogged?
Explain how to use softener
< Clean the compartment for softener >
Visit to check
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2.FAULT DIAGNOSIS AND TROUBLE SHOOTING
CAUTION
1. Be careful of electric shock or disconnecting the parts while trouble shooting.
2. First of all, check the connection of each part terminal with wiring diagram.
3. If you replace the MAIN PWB ASSEMBLY, Put in the connectors correctly.
NO POWER
When measuring the voltage of the outlet,
is the voltage AC 220-240V~?
Check the fuse?
Is the led(1) on?
Replace MAIN PWB
ASSEMBLY
Is connector(2) disconnected or
disassembled?
Reconnect the PWB
ASSEMBLY
Reconnect the PWB
ASSEMBLY
Is wire of the PWB ASSEMBLY disconnected?
Replace PWB ASSEMBLY
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NO WATER SUPPLY
Is water supply shut-off?
Is the tap opened?
Open the tap.
Check the AIR CHAMBER
and the tube clogged
with impurity.
When you press both Rinse button and Spin button
simultaneously, is the water level frequency below
240?
Is the inlet valve filter clogged with impurity?
Clean the filter.
Replace the INLET VALVE
ASSEMBLY.
Is resistance between each terminal of INLET
VALVE ASSEMBLY is 2~8
k
?
Check the voltage of the inlet valve connector
220-240V~.
Replace the MAIN PWB
ASSEMBLY
(Refer to 7-2 QC TEST MODE)
DETERGENT DOES NOT FLOW IN
Refer to
Is water supplied?
NO WATER SUPPLY
Check the wiring on the
dispenser.
Are replaceptacles correctly connected to the
terminals of the INLET VALVE ASSEMBLY?
Put the detergent in the
correct position
SOFTENER
PRE -
Is detergent put in the correct compartment of
the drawer?
PRE+MAIN
MAIN WASH
: Detergent
MAIN
WASH
WASH
Clean the drawer.
Is the detergent hardened?
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTENER DOES NOT FLOW IN
Refer to
Is water supplied?
NO WATER SUPPLY
Are receptacles correctly connected to the terminals
of the INLET VALVE ASSEMBLY?
Check the wiring on the
dispenser.
Put it in the correct
compartment.
Is softener put in the correct compartment of the
drawer?
Clean the cap and
drawer.
Is the softener cap clogged?
ABNORMAL SOUND
Is the motor bolt loosened?
Fix the bolt tightly.
Replace the STATOR
ASSEMBLY or ROTOR
ASSEMBLY.
Is there friction noise from the motor?
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HEATING WITHOUT WATER
When pressing Wash and Rinse at the same time
after draining, is the water level frequency 248 ~ 262
or more?
When pressing Rinse, Spin buttons at the same
time while wash, is the water level frequency
between 230 - 243?
Replace the
S.PRESSURE SWITCH
ASSEMBLY
Wash Rinse
Checking voltage between two pins as press the
POWER button is the voltage 220-240V~?
Replace the MAIN PWB
ASSEMBLY
DRAIN MALFUNCTIONING
Repair the DRAIN HOSE
ASSEMBLY.
Is the drain hose twisted or frozen?
Remove foreign material.
Is the impeller of the drain pump clogged?
Reconnect or repair the
connector
Is the connector disconnected, disassembled?
Repair the DRAIN PUMP
ASSEMBLY.
Is the coil of the drain pump cut-off?
(resistance of coil is 80~150 )
Repair the MAIN PWB
ASSEMBLY.
When checking voltage between connectors
( , )on spinning, is the voltage 220-240V~
as the figure?
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HEATING CONTINUOUSLY ABOVE
THE SETTING WATER TEMPERATURE
When checking THERMISTOR on the tub is the
THERMISTOR loosened above 2mm from
the rubber?
Push the THERMISTOR
tightly to the rubber.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SPIN TROUBLE
Check the S.PRESSURE SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the
S.PRESSURE SWITCH
ASSEMBLY or the HOSE,
replace the S.PRESSURE
SWITCH ASSEMBLY or the
HOSE.
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the Wash and Rinse buttons at
the same time on the program.
WasRinse
When pressing Rinse, Spin and POWER buttons at
the same time after power off, press the Start/Pause
button 1 times, is the drum low speed spin?
Normal
Rinse
Spin
Is it disconnected, or disassembled?
[Red:3pin(1), NA:4pin(2)]
Correct the connector.
Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Replace the STATOR
ASSEMBLY
Resistance of terminal:
About 5
15
Replace the MAIN PWB ASSEMBLY
DOOR DOES NOT OPEN
After draining and
Door lock lamp off,
open the door.
Is Door lock Display lamp on?
Door Lock
Check switch Assembly,
Door lock connector and
Main PWB
Is
Displayed?
ASSEMBLY(Blue, 3pin)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
[dHE] ERROR DISPLAY
Dry duct
Replace the thermistor.
(6322FR2046B)
~
NO
YES
Condensing
duct
Thermistor
Condensing bellows
CHECK FOR DRY HEATER TROUBLE
CHECK FOR DRY FAN MOTOR TROUBLE
Disassemble the cabinet cover and
condensing bellows.
Is there any foreign object in condensing
bellows.
Clean the bellows
YES
NO
Disassemble the dry fan assy and dry duct
upper, and clean foreign object in duct and
fan.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9. DISASSEMBLY INSTRUCTIONS
ƒRDisassemble and repair the parts after pulling out power cord from the outlet.
CONTROL PANEL
¤ Unscrew the screws on the top plate.
PLATE ASSEMBLY(TOP)
¤ŁThe plate assembly(Top) is pulled back and
then upward to arrow direction.
¤ØThe cover(Inner) is disassembled.
¤ The PWB assembly(Display) connectors are
HOOK
disconnected.
¤ŁPull out drawer, three screws are unscrewed.
¤ØPush two upper hooks and pull the control
panel forward.
PANEL ASSEMBLY (CONTROL)
¤ The PWB assembly(Display) is disconnected.
PWB ASSEMBLY
(DISPLAY)
¤ŁWhen 8 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PWB ASSEMBLY(POWER)
¤ The back cover is removed.
¤ŁTwo screws are unscrewed.
¤ØDisconnect connector from the wiring.
¤ŒPull the PWB assembly (Main) to arrow
direction.
DISPENSER ASSEMBLY
¤ The plate assembly(Top)and the
cover(lnner)are disassembled.
¤ŁPull the drawer to arrow direction.
¤ØTwo screws are unscrewed.
DRAWER
¤ The hose clamps and the hose are
disassembled.
¤ŁThe ventilation bellows are disassembled on
the tub.
DISPENSER ASSEMBLY
30
Download from Www.Somanuals.com. All Manuals Search And Download.
INLET VALVE
¤ Disconnect the wiring connector.
¤ŁRemove the valve by two screws of the valve
2
holder.
1
ƒTWhen reconnecting the connector
VALVE ¥L(DRY)
YL/BK - BK
4
VALVE ¥M(PRE-WASH)
GY/WH - BK
3
VALVE ¥N(NORMAL-WASH)
VALVE ®È (NORMAL-WASH)
WH/BK - BK
BL/RD - BK
BL/RD - BK
¥O
VALVE
(HOT)
COVER LOWER
¤ Remove the lower cover to arrow direction
after one screw is unscrewed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR
¤ Open the door completely.
¤ŁRemove the two screws from the hinge.
¡ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
Removing method of remained water
¤ Rotate the Cap(Remaining Hose) to arrow
direction.
¤ŁPull it out from hose.
¡ First, prepare a bucket to put in the remained
water.
Cap(Remaining Hose)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
GASKET ASSEMBLY
¤ The cabinet gasket clamp is released.
¤ŁTwo screws are unscrewed from the cabinet
cover.
¤ One screw is unscrewed from the lower cover.
¤ŁThe lower cover is disassembled by pulling
out.
¤ØThree screws are unscrewed from the cabinet.
Cap
(Remaining Hose)
¤ The control panel is removed.
¤ŁScrew is unscrewed from the cabinet cover.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
¤ Remove tub gasket clamp by loosening the
screw.
Tub Gasket
Clamp
¤ Remove dry gasket clamp by loosening the
screw.
Dry
Gasket
Clamp
¤ When reassembling the gasket, put the drain
hole of the gasket downward, then assemble.
Drain Hole
34
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
¤ Remove the back cover.
¤ŁAfter loosening the bolt, Rotor, pull out the
rotor.
Rotor
Bolt
(ROTOR ASSEMBLY)
¤ Remove the 6 bolt from the stator.
¤ŁDisconnect the 2 connectors.
HOW TO ASSEMBLE THE MOTOR
(STATOR ASSEMBLY)
¤ Remove the bolts at the Tub.
¤ŁThe Hinge(Damper) at the base is pulled off
Bolt
Hinge
(Damper)
pressing on the snaps at the sharp end.
¤ØThe hinge at the base is pulled off.
(To arrow direction)
Friction
Damper
(FRICTION DAMPER)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
PUMP
¤ Remove pump outlet hose.
Pump Outlet Hose
¤ŁRemove tub pump bellows.
¤ØRemove cap(Remaining Hose).
¤ŒDisconnect the wiring.
Screw
¤ºThree screws are unscrewed from the cabinet.
¤ Remove the pump to arrow direction.
Cap
(Remaining Hose)
Tub Pump Bellows
HEATER
¤ Loosen the nut.
¤ŁRemove washing heater by pulling out.
Washing
Heater
Ring Terminal
Nut
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
THERMISTOR
¤ Pull it out by holding the thermistor bracket.
ƒTIf holding the wire and pulling out it, it may be
broken.
Thermistor
Bracket
Thermistor bulb
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCH ASSY, DOOR LOCK
¤ The cabinet cover clamp is removed and the
gasket is released.
¤ŁTwo screws are unscrewed.
¤ØThe door lock S/W is disconnected form the
wiring connector and the strap.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
¤ Remove washing heater.
¤ŁRemove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
Hole
Washing Heater
37
Download from Www.Somanuals.com. All Manuals Search And Download.
DRY DUCT
¤ Remove 5 screws and dry fan assembly.
Dry fan
Assembly
¤ŁRemove 6 screws and dry duct upper.
Dry Duct Upper
¤ Remove 1 screw and dry heater.
Thermostat
Dry Heater
¤ŁRemove thermostat.
CONDENSING DUCT
¤ Remove 2 screws from cabinet.
¤ Remove clamp and condensing duct.
Condensing Duct
Clamp
Condensing
Bellows
38
Download from Www.Somanuals.com. All Manuals Search And Download.
10. EXPLODED VIEW AND PART LIST
10-1.THE PART LIST OF CABINET ASSEMBLY
:Non-service part
:Service part
A110
A150
A120
A101
A102
A104
A141
A131
A103
A100
A130
A485
A430
A440
A450
A133
A410
A200
A300
A310
A303
A277
A201
A220
HOT(ORANGE)
COLD(BLUE)
A275
A276
A210
39
Download from Www.Somanuals.com. All Manuals Search And Download.
10-2 THE EXPLODED VIEW OF CONTROL PANEL &
DISPENSER ASSEMBLY
:Non-service part
:Service part
F170
F160
F300
F460
F461
F310
F430
K343
F220
F450
F120
F110
F210
F130
40
Download from Www.Somanuals.com. All Manuals Search And Download.
10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
:Non-service part
:Service part
K140
K141
K110 K142 K411 K420
K123
K120
K360
K211
K143
K350
K130
K131
K513
F140
K310
K511
K510
K610
K105
K410
K320
K611
K100
K530
K343
K341
K344
K340
K531 K520 K540
41
Download from Www.Somanuals.com. All Manuals Search And Download.
10-4 THE EXPLODED VIEW OF DRYER
:Non-service part
:Service part
M120
M110
M100
M121
M210
M101
M220
M312
M310
M230
M311
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MAY. 2002 PRINTED IN KOREA
P/No.:3828ER3013K
Download from Www.Somanuals.com. All Manuals Search And Download.
|