OWNER’S MANUAL
SIDE BY SIDE
REFRIGERATOR
Please read this manual carefully before operating your set
and retain it for future reference.
MANUAL DE USUARIO
REFRIGERADOR
DE DOS PUERTAS
Lea detenidamente este manual antes de empezar a utilizar
el refrigerador y guárdelo como referencia para el futuro.
Model Name/Nombre de Modelo**=color number/número de color
LSC27925**
P/No. MFL63719704
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Warranty (USA)
English Version
Spanish Version
1-2
3-26
Food Storage Guide
15
15-16
16
Storing Frozen Food
Water and Ice Dispenser
Ice Storage Bin
Ice maker Cover
Door and Rack Support
Snack Pan
16
16
16
17
27-50
Crisper and Crisper Cover
Humidity Controls
Refrigerator Shelves
Freezer Shelf
17
17
17-18
18
Important Safety Instructions
Requirements for Ground Connection
4-5
5
Refrigerator Installation
UnpackingyourRefrigerator
Installation
6-11
6
Filter
19-20
19
Water Filter
Performance Data Sheet
6
20
Base Grille Installation
Handle Removal
6
7
Handle Installation
Removing and Replacing
Refrigerator Doors
Door Alignment
Connecting the Water Line
7
Care and Cleaning
21-22
21
General Cleaning Tips
Outside
Inside Walls
Door Liners & Gaskets
Plastic Parts (Covers and Panel)
Back Cover
7-8
8-9
9-11
21
21
21
21
21
Refrigerator Features
12
Lamp Replacement
Power Interruptions
When you go on Vacation
When you Move
When you should set the Ice maker
Power Switch to off
Normal Sounds you May Hear
21
21-22
22
22
Using your Refrigerator
Ensuring Proper Air Circulation
Prior to Use
13-18
13
13
22
22
Control Panel Features
Refrigerator and Freezer Controls
Adjusting Control Settings
Ice maker Operation
13-14
13-14
14
14-15
Troubleshooting Guide
23-26
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
SAFETY MESSAGES
This manual contains several important safety notices. Always read and obey all of the following safety messages.
This is the safety alert symbol. This symbol is a warning to potential dangers that could cause death, injury
or damage to you, others or the product. All safety messages will follow after this warning symbol and the
word “DANGER”, “CAUTION” or “WARNING”. These words mean:
You may be killed or suffer fatal damage if you do not follow instructions.
DANGER
You may be killed or seriously injured if you do not follow instructions.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may result in minor injury
or damage to the product.
CAUTION
All safety messages inform you of potential danger, advise you on how to reduce the risk of injury and tell you what
can occur if the instructions are not followed.
WARNING
could explode after freezing and cause damage.
To reduce the risk of fire, electrical shock or personal
injury, the following precaution measures should be
followed:
• NEVER disconnect the refrigerator by pulling the
power cord, always grip the plug firmly and disconnect
it directly from the outlet.
• For your safety, this product should be properly
grounded. Have a qualified professional check the
electrical circuit and outlet to ensure a proper ground
connection.
• Read all instructions before utilizing the product. Utilize
• Immediately repair or replace all faulty or damaged
service cables. Do not use cords that have cracks or
abrasion damage on the length of the cord or on the
plug.
this product only as explicitly expressed in this guide.
• Once the refrigerator is operating, avoid touching cold
surfaces of the freezer with damp or wet hands; the
skin could become adhered to these surfaces.
• When moving your refrigerator, take care not to roll
over the electrical cord.
• In refrigerators with an automatic ice dispenser, avoid
contact with moving parts of the ejector mechanism
or with the heating mechanism that discharges the
cubes. DO NOT place your fingers or hands in the
ice dispenser mechanism while the refrigerator is
connected.
• DO NOT store or use gasoline or other combustible
liquids or vapors in proximity with this or any other
electrical appliance.
• DO NOT permit children to climb, stand or swing from
the doors or shelves of the refrigerator. This can cause
serious injury to them and damage to the product.
• DO NOT refreeze foods which have already thawed.
The Department of Agriculture of the United States, in
your Bulletin of Home and Gardens No. 69 establishes
that:
“...You can refreeze food that has thawed if they contain
ice crystals or are cold and below 40 °F (4 °C)”.
• Keep your fingers away from areas in which they
can become caught, such as the doors, hinges and
cabinets. Be careful closing the doors when children
are near.
“...Ground beef, perishable food or seafood that is
discolored or has an unpleasant odor should not be
frozen or consumed. Consumption of melted ice cream
should also be avoided. If the odor or color of food is
questionable, discard it. The food may be dangerous to
consume”.
• Unplug the refrigerator before cleaning or repairing.
NOTE: We strongly recommend that any repair
services be performed by a qualified professional.
• Before replacing a burned-out light bulb, unplug the
refrigerator or shut down the circuit breaker to avoid
contact with a live wire (the bulb could break while
being replaced). NOTE: Setting the control to the OFF
position does not disconnect the power from the light
bulb circuit.
“Partial thawing or refreezing reduces the quality of the
food, especially fruit, vegetables and prepared meals.
The quality of red meat is less affected than other foods.
Use refrozen products as soon as possible in order to
maintain their quality”.
• Do not keep bottles in the freezer compartment, they
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
This appliance is not intended for use by children, persons with physical or mental disabilities, persons with reduced
sensory or mental capacity, or persons with lack of experience or know-how, unless they have supervision or instruction
in relation to the use of the appliance by the person responsible for their safety. Children should be supervised to
assure that they do not play with the appliance.
DANGER: CHILDREN MAY BECOME TRAPPED
Children becoming trapped or suffocated is not
a problem of the past. Discarded and abandoned
refrigerators are a hazard, even if they remain there
“for just a few days”. If you would like to dispose of
your old refrigerator, please follow the instructions
below to prevent any accidents.
BEFORE DISPOSING YOUR REFRIGERATOR OR
FREEZER WHEN NO LONGER IN USE:
• Remove the doors.
• Leave the shelves in place so that children cannot
easily become stuck in them.
CFC DISPOSAL
Your old refrigerator may have a cooling system that If you decide to throw out your old refrigerator, ensure
uses CFC’s (chlorofluorocarbons). CFC affects the that CFC contaminants are properly disposed of by a
stratospheric layer of the ozone.
qualified professional. If you intentionally remove the
CFC refrigerant, you could be subject to fines or prison
in accordance with environmental legislation in effect.
REQUIREMENTS FOR GROUND CONNECTION
IMPORTANT: Attentively read the following.
It is your responsibility and obligation to replace two-
prong outlets with that of an adequately grounded three-
prong outlet.
TO CONNECT ELECTRICITY
WARNING
Do not, under any circumstance, cut or extract the third
prong from the plug.
ELECTRICAL SHOCK HAZARD
FOR YOUR PERSONAL SAFETY, this appliance must
be properly grounded. Have a qualified electrician
check your wall outlet to ensure that the plug is
grounded properly.
NOTE: Before installation, cleaning or replacing light
bulbs, you must disconnect the appliance from the
power source. When finished, plug the appliance back in
and adjust the thermostat to the desired position.
3 prong
grounding type
wall receptacle
USE OF EXTENSION CABLES
We do not recommend the use of extension cables.
However, if you still choose to utilize an extension cable,
it is absolutely necessary that it is listed in the UL (in
the United States) or CSA (in Canada), that it supports
three-pronged plugs and that the electrical current
support a minimum of 15 A and 120 V.
The use of an extension cable will increase the amount
of space needed behind the refrigerator.
3 prong
grounding
plug
Ensure proper
ground exists
before use
WARNING
REPLACING ELECTRICAL CABLE
If the power cord is damaged, it must be replaced by
our service center or qualified LG technician to avoid
any risk.
RECOMMENDED GROUNDING METHOD
Your refrigerator must always be plugged to its own
outlet which is adequately grounded. The energy current
should only be 115 V, 60 Hz, A.C. and fused at 15 or 20
A. This provides the best performance and prevents an
overload which could cause a fire from the overheating
of the cables. It is recommended that a separate circuit
be used for this appliance, as well as a receptacle that
cannot be disconnected with a switch.
Do not use an extension cable.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR INSTALLATION
is between 41 °F (5 °C) and 110 °F (43 °C). If the
temperature around the appliance is too low or high,
cooling ability may be adversely affected.
WARNING
EXCESSIVE WEIGHT HAZARD
Use the assistance of two or more persons to move or
install the refrigerator. Not following these instructions
may cause injury to the back and other parts of the
body.
NOTE: For proper air circulation, and best
cooling and energy consumption
results, maintain
a
minimum
distance of 2 inches (5,08 cm) from
adjacent items and surfaces.
2"(5,08 cm)
UNPACKING YOUR REFRIGERATOR
Before installing your refrigerator, remove any tape
or temporary stickers. Do not remove any stickers
that feature warnings, the model serial number or the
technical label of the product located on the back of the
refrigerator.
WARNING
Be careful when you work with the hinge, base grille,
stopper, etc. You may be injured.
Do not put hands or metal sticks into air vents, base
grille or bottom of the refrigerator. You may be injured
or receive an electrical shock.
To remove adhesive tape residue, rub it well with your
fingers and a little liquid detergent. Clean with warm
water and let dry.
BASE GRILLE INSTALLATION
To install or replace base grille:
1. Remove the 2 screws from the bottom front part of
refrigerator.
2.Place base grille into position and insert and tighten
screws.
Donotusesharpinstruments,rubbingalcohol,flammable
liquids or abrasive cleaning products to remove the
adhesive tape or glue. These products can damage the
surface of your refrigerator. For more information, see
the section on “Important Safety Instructions”.
The shelves come already installed in their factory
position. Remove the shelves and replace them
according to your spacing needs.
To remove the base grille:
1. Open the doors (Refrigerator and Freezer).
2.Once doors are open, remove screws from base grille
and remove.
3.Reattach screws to the base of refrigerator.
WARNING
WHEN MOVING YOUR REFRIGERATOR
Your refrigerator is extremely heavy. Make sure you
protect the floor when moving your refrigerator for
cleaning or servicing. Always pull your refrigerator
straight out when moving it. Do not shift from side
to side or “walk” the refrigerator when attempting to
move it as this can cause damage to the floor.
WARNING
EXPLOSION HAZARD
Keep all flammable materials and vapors (such as
gasoline) away from the refrigerator. Not following
these instructions may cause death, explosion or fire
INSTALLATION
1. Avoid placing the unit near heat sources, direct
sunlight or humidity.
2.To minimize noise and vibration, the refrigerator MUST
be installed on a solidly constructed floor.
3.Carpeting and soft tile surfaces are not recommended.
4.NEVER install the refrigerator on a platform or a weakly
supported structure.
5.Install this appliance in an area where the temperature
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR INSTALLATION
HANDLE REMOVAL
REMOVING AND REPLACING REFRIGERATOR
DOORS
Before removing the doors, remove the base grille. See
“Base Grille Installation” for reference.
You may have to remove the door handles to move the
refrigerator through a narrow opening. See instructions
below.
NOTE: To avoid damaging door surfaces when moving
the refrigerator through narrow openings, it is
ALWAYS recommended to remove the doors as
instructed in the next two pages.
To remove the right (refrigerator) door:
1. Open the door. Remove the top hinge cover screw (1).
2.Use a flat blade screwdriver to pry back the hooks
(not shown) of the hinge cover (2) from the top of the
refrigerator cabinet. Lift up the cover.
3.Rotate the hinge lever (3) clockwise. Lift the top hinge
(4) free of the hinge lever latch (5).
• Loosen the set screws with a 3/32” (2,38 mm) Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be
tightened or moved, use a 1/4” (6,35 mm) Allen
wrench.
NOTE: Regardless of hinge lever type, removal process
is the same.
4.Lift the door from the lower hinge pin.
5.Place the door, inside facing up, on a non scratching
surface.
Mounting
Fasteners
(1)
(2)
Set
Screw
(3)
(4 )
(5)
(3)
Rivet
Type 1
(4 )
(5)
Allen
Type 2
Wrench
CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall
forward.
HANDLE INSTALLATION
Place the handle on the door by adjusting handle
footprints to fit mounting fasteners and tighten the set
screws with a 3/32” (2,38 mm) Allen wrench .
Removing the left (freezer) door with water line
connection:
Pull up the water feed tube while pressing the area
(Figure 1) as shown in the figure below.
NOTE: If the handle mounting fasteners need to be
tightened or removed use a 1/4” (6,35 mm)
Allen wrench.
NOTE: If a tube end is deformed or abraded, trim the
part away. Disconnecting the tube under the
door causes about 0,13 gallons (0,5 liters) water
to flow out. Put a large container at end of tube
to prevent water from draining onto the floor.
WARNING
ELECTRIC SHOCK HAZARD
• Disconnect electrical supply to the refrigerator
before installing. Failure to do so could result in
death or serious injury.
• Do not put hands, feet or other objects into the air
vents, base grille, or bottom of the refrigerator. You
may be injured or receive an electrical shock.
• Be careful when you work with the hinge, base grille
and stopper. You may be injured. Before removing
the doors, remove the base grille.
1. Open the door. Remove the top hinge cover screw (1).
2.Use a flat blade screwdriver to pry back the hooks
(not shown) of the hinge cover (2) from the top of the
refrigerator cabinet (2). Lift up the cover.
3.Disconnect all the wire harnesses (3).
4.Remove the grounding screw (4).
5.Rotate hinge lever (5) counterclockwise. Lift the top
hinge (6) free of the hinge lever latch (7).
NOTE: Regardless of hinge lever type, removal process
is the same.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR INSTALLATION
1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
2.Fit top hinge (6) over hinge lever latch (7) and into
Figure 1
place. Rotate lever (5) clockwise to secure hinge.
NOTE: Regardless of hinge lever type, reinstallation
process is the same.
(2)
(1)
3.Install the grounding screw (4) and connect all the wire
harnesses (3).
4.Hook tab on door switch side of cover (2) under edge
of wire opening in cabinet top. Position cover into
place. Insert and tighten cover screw (1).
5.Reconnect the water tubes by inserting the tubes into
the connectors.
(5)
(3)
(4)
(7)
(7)
(6)
(5)
(6)
Rivet
Type 1
Type 2
Collet
Tube
CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall
forward.
Insert Line
6.Lift the door from the lower hinge pin being careful to
pull the water lines through the lower hinge pin.
7. Place the door, inside facing up, on a non scratching Remove the base grille before adjusting the doors. See
DOOR ALIGNMENT
surface.
“Base Grille Installation” for reference. Two methods of
door alignment are available based on the amount of
adjustment needed and installation requirements.
Reinstalling the right (refrigerator) door:
1. Place the door onto the lower hinge pin.
Type 1
2.Fit top hinge (4) over hinge lever latch (5) into place. Adjusting tool: Flat blade screwdriver. If the freezer
Rotate lever (3) counterclockwise to secure hinge.
compartment door is lower than the refrigerator
compartment door, level them by inserting a flat blade
NOTE: Regardless of hinge lever type, reinstallation screwdriver into the groove of the left leveling leg and
process is the same.
rotating it clockwise.
Height
difference
3.Hook tab on switch side of corner under edge of wire
opening in cabinet top. Position cover (2) into place.
Insert and tighten cover screw (1).
Left
Height
leveling leg
difference
(1)
C
F
H
(2)
(3)
(3)
(4)
Rivet
(5)
(4)
(5)
Type 2
If the freezer compartment door is higher than the
refrigerator compartment door, level them by inserting a
flat blade screwdriver into the groove of the right leveling
leg and rotating it clockwise.
Type 1
Reinstalling the left (freezer) door:
Height
difference
(2)
(1)
Right
leveling leg
Height
difference
(3)
(4)
(7)
C
F
H
F
(5)
(6)
(5)
(6)
(7)
Rivet
Type 2
Type 1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR INSTALLATION
Type 2
When using any electrical device (such as a power drill)
during installation, be sure the device is double insulated
or grounded in a manner to prevent the hazard of electric
shock, or is battery-powered. All installations MUST be
in accordance with local plumbing code requirements.
Adjusting tools: 5/16” (8 mm) wrench and 3/4” (19 mm)
wrench.
Height
difference
Keeper Nut
Wrench
NOTE: Wear eye protection.
Height
difference
Up
Adjustment
hinge pin
Down
• If a reverse osmosis water filtration system is
connected to your cold water supply, the water line
installation is not warranted by the refrigerator or ice
maker manufacturer or seller. Follow next instruction
carefully to minimize the risk of expensive water
damage.
C
F
H
Using a 3/4” (19 mm) wrench, turn the keeper nut
clockwise to loosen the keeper nut.
• If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to be a
minimum of 40 to 60 PSI (2,8 kg•f/cm² ~ 4,2 kg•f/
cm² , less than 2~3 sec to fill a cup of 7 oz. capacity).
Using a 5/16” (8 mm) wrench, turn the adjustment hinge
pin clockwise or counterclockwise to level the refrigerator
and freezer door.
After setting level door, turn the keeper nut If the water pressure from the reverse osmosis system is
counterclockwise to tighten.
less than 21 PSI (1,5 kg•f/cm², more than 4 sec to fill a
cup of 7 oz. capacity):
CAUTION: Do not over tight the door adjustment • Check to see whether the sediment filter in the reverse
screw. The hinge pin can be pulled osmosis system is blocked. Replace thefilter if necessary.
out. (Adjustable range of height is a • Allow the storage tank on the reverse osmosis system
maximum of 1/2” (1,27 cm)).
to refill after heavy usage.
• If the issue about water pressure from reverse osmosis
remains, call a licensed, qualified plumber.
AFTER LEVELING THE DOOR HEIGHT
Confirm all legs are in contact with the floor.
WHAT YOU WILL NEED
• Copper Tubing, 1/4” (6,35 mm) outer
diameter to connect the refrigerator to
the water supply. Be sure both ends of
the tubing are cut square.
CONNECTING THE WATER LINE
NOTE: Water line installation is needed when the
Automatic Ice maker and/or Water Dispenser
features are available on your product.
To determine how much tubing you need, measure
the distance from the water valve on the back of the
refrigerator to the water supply pipe. Then add 8 feet
(2,4 m). Be sure there is sufficient extra tubing (about
8 feet [2,4 m] coiled into 3 turns of about 10” [25 cm]
diameter) to allow the refrigerator to move out from the
wall after installation.
BEFORE YOU BEGIN
This water line installation is not warranted by the
refrigerator or ice maker manufacturer or seller.
Follow these instructions carefully to minimize the risk of
expensive water damage.
Water hammer (water banging in the pipes) in house
plumbing can cause damage to refrigerator parts Be sure that the kit you select allows at least 8 feet
and lead to water leakage or flooding. Call a qualified
plumber to correct water hammer before installing the
water supply line to the refrigerator.
(2,4 m) as described above.
• A cold water supply. The water pressure MUST be
between 20 and 120 PSI (1,4 bar and 8,2 bar) on
models without a water filter and between 40 and 120
PSI (2,8 bar and 8,2 bar) on models with a water filter.
To prevent burns and product damage, do not hook up
the water line to the hot water line.
If you use your refrigerator before connecting the water • Power drill.
line, make sure the ice maker power switch is in the OFF
(O) position.
Do not install the ice maker tubing in areas where • 1/2” (12,7 mm) or Adjustable Wrench.
temperatures fall below freezing.
• Flat head and Phillips screwdrivers.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR INSTALLATION
• Two 1/4” (6,35 mm) outer
diameter compression nuts
and 2 ferrules (sleeves) to
connect the copper tubing
to the shutoff valve and the
refrigerator water valve.
4. FASTEN THE SHUTOFF VALVE
Fasten the shutoff valve to the cold water pipe with the
pipe clamp.
Pipe Clamp
If your existing copper water line has a
flared fitting at the end, you will need
an adapter (available at plumbing
supply stores) to connect the water
line to the refrigerator OR you can cut
off the flared fitting with a tube cutter and then use a
compression fitting.
Saddle-Type
Vertical Cold
Shutoff Valve
Water Pipe
• Shutoff valve to connect
to the cold water line. The
shutoff valve should have a
water inlet with a minimum
inside diameter of 5/32”
(3,96 mm) at the point of
NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.
5. TIGHTEN THE PIPE CLAMP
connection to the COLD WATER LINE. Saddle-type Tighten the clamp screws until the sealing washer begins
shutoff valves are included in many water supply kits. to swell.
Before purchasing, make sure a saddle-type valve
complies with your local plumbing codes.
NOTE: Do not overtighten or you may crush the tubing.
Washer
INSTALLATION INSTRUCTIONS
Inlet End
Pipe Clamp
WARNING: Connect to potable water supply only.
Clamp Screw
1. SHUTOFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the pressure on the
line.
2. CHOOSE THE VALVE LOCATION
Choose a location for the valve that is
easily accessible. It is best to connect into
the side of a vertical water pipe. When it
is necessary to connect into a horizontal
water pipe, make the connection to the
top or side, rather than at the bottom, to
avoid drawing off any sediment from the
water pipe.
6. ROUTE THE TUBING
Route the tubing between the cold water line and the
refrigerator.
Route the tubing through a hole drilled in the wall or
floor (behind the refrigerator or adjacent base cabinet)
as close to the wall as possible.
3. DRILL THE HOLE FOR THE VALVE
Drill a 1/4” (6,35 mm) hole in
the water pipe using a sharp bit.
Remove any burrs resulting from
drilling the hole in the pipe. Take
care not to allow water to drain
into the drill. Failure to drill a 1/4”
(6,35 mm) hole may result in
reduced ice production or smaller
cubes.
NOTE: Be sure there is sufficient extra tubing [about
8 feet (2,4 m) coiled into 3 turns of about 10”
(25 cm) diameter] to allow the refrigerator to
move out from the wall after installation.
7. CONNECT THE TUBING TO THE VALVE
Place the compression nut and ferrule (sleeve) for copper
tubing onto the end of the tubing and connect it to the
shutoff valve. Make sure the tubing is fully inserted into
the valve. Tighten the compression nut securely.
NOTE: Licensed plumbers MUST use only cooper
tubing NDA tubing #49595 or 49499 or Cross
Link Polyethylene (PEX) tubing.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR INSTALLATION
Back of refrigerator
1/4” (6,35 mm) Tubing
Tubing Clamp
Compression
Nut
Saddle-Type
Shutoff Valve
1/4” (6,35 mm)
Compression
Nut
Packing
Nut
Ferrule
(sleeve)
Outlet
Valve
Ferrule
(sleeve)
Refrigerator
Connection
Figure 1
Fasten the tubing into the tubing clamp attached to the
back of the refrigerator.
First, loosen the screw fastening the clamp. Next, insert
the tubing in the groove. Finally, re-fasten the screw.
NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.
8. FLUSH OUT THE TUBING
Turn the main water supply on and
flush out the tubing until the water is
clear. Shut the water off at the water
valve after about one quart (1 L) of
water has been flushed through the
tubing.
10. PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that
it does not vibrate against the
back of the refrigerator or against
the wall. Push the refrigerator
back to the wall.
11. START THE ICE MAKER
9. CONNECT THE TUBING TO THE REFRIGERATOR
NOTES:
• Before making the connection to the refrigerator, be
sure the refrigerator power cord is not plugged into
the wall outlet.
• If your refrigerator does not have a water filter, we
recommend installing one. If your water supply has
sand or particles that could clog the screen of the
refrigerator’s water valve, install the filter in the water
line near the refrigerator.
Set the ice maker power switch to the ON (I) position.
The ice maker will not begin to operate until it reaches
its operating temperature of 15 °F (-9 °C) or below. It
will then begin operation automatically if the ice maker
power switch is in the ON (I) position.
• Do not uses old hoses; only use new hoses provided
by the manufacturer.
1. Remove the plastic flexible cap from the refrigerator
connection.
2.Place the compression nut and ferrule (sleeve) onto
the end of the tubing. (See figure 1).
3.Insert the end of the tubing into the connection as
far as possible. While holding the tubing, tighten the
fitting.
CAUTION: Check to make sure that leaks are not
occurring in the water line.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR FEATURES
Use this page to become more familiar with the parts and features.
NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the
items listed below. The locations of the features shown below may not match your model.
A
B
Freezer Door Rack
Refrigerator Lamp (LED)
Water Filter
H
Automatic Ice maker
The ice is produced in the icemaker and sent to the
I
dispenser.
Refrigerator Shelf
J
K
C
Freezer Lamp (LED)
Freezer Shelf
Drawer
Snack Pan
For storage of meat or fresh food.
D
E
F
L
Refrigerator Door Rack
M Vegetable Drawer
Base Grille
Dairy Corner
G
For storage of dairy products such as butter and cheese.
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
USING YOUR REFRIGERATOR
freezer compartment to ensure proper cooling. Your
refrigerator is now ready for use.
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air MUST flow
between the refrigerator and freezer sections.
CONTROL PANEL FEATURES
Press the button for the desire function to review and
select other settings.
• Cool air enters the freezer through the vents located
at the top of the compartment and exits through the
vents located behind the freezer drawers.
• Cool air from the freezer section enters the fresh
food section through vents located at the top of the
compartment. The air moves down throughout the
compartment and exits through the vents located
behind the crisper drawers.
REFRIGERATOR AND FREEZER CONTROLS
Initially set the refrigerator and freezer controls to
the recommended (middle) settings by pressing
REFRIGERATOR Graphic and FREEZER Graphic.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. After 24
hours, adjust the compartments temperatures
as desired . The more lit bars, the colder the
refrigerator and freezer will be.
• Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
Display Off Mode
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer
to the other.
You MUST thoroughly clean both sections to eliminate
odors. To prevent odor transfer and dried out food, wrap
or cover foods tightly. (See the “Food Storage Guide”
section for details.)
The display lights up and stays lit when the refrigerator is
plugged in for 60 seconds. After the display lights all off
except the dispenser icon selected (CRUSH, WATER or
CUBE) and the display only lights when door is opened
or display button is pressed. Display turn off 20 seconds
after door is closed or display button pressed. You can
change the display always ON pressing “FREEZER” and
“ICE PLUS” buttons at the same time for 5 seconds. A
tone will sound indicating that the display is ON (Display
Off Mode Deactivate).
NOTE: If you close the
refrigerator door, you may see
the freezer door open and
close again due to pressure
from internal air flow.
Activate the Display Off Mode in same manner as
deactivation.
ICE TYPE
You can select water or ice.
Select Water, Crushed Ice or Cubed Ice by pressing the
ICE TYPE button to the selection desired. The Water,
Crushed Ice or Cubed Ice icon will light up to indicate
selection.
PRIOR TO USE
1. Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
CUBE
Light up the cubed ice lamp by pressing the
selection button. The icon will be illuminated.
2.Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3.Let your refrigerator run for at least 2 or 3 hours before
putting food in it. Check the flow of cold air in the
Light up the water lamp by pressing the selection
button. The icon will be illuminated.
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
USING YOUR REFRIGERATOR
Light up the crushed ice lamp by pressing the freezer, start by adjusting the refrigerator and allow 24
selection button. The icon will be illuminated.
hours for the temperature to stabilize. If it is too warm or
too cold, then adjust the freezer control. Use the settings
To dispense water or ice, gently push your cup against listed in the chart below as a guide. Always remember to
the dispenser pad.
wait at least 24 hours between adjustments.
NOTE: Hold your cup in place for a couple of seconds
after dispensing ice or water so the last few drops
go in your cup instead of on the floor.
CONDITION/REASON:
RECOMMENDED
ADJUSTMENT:
REFRIGERATOR section Adjust the
is too warm
• Opening the door often to the next highest
• Adding a large amount number and wait 24
of food
• Room temperature is
very warm
REFRIGERATOR setting
DOOR ALARM
When either refrigerator or freezer door is left open for
more than 60 seconds, an alarm will sound 5 times at
thirty-second intervals to let you know the door is open.
The alarm will repeat every 30 seconds until all doors
are completely closed. Please contact the local service
center if warning tone continues to sound even after
closing the door.
hours, then check.
FREEZER section is too
warm/ ice is made too
slowly
Adjust the FREEZER
setting to the next
highest number and wait
FILTER
(Filter Replacement Cycle)
• Opening the door often 24 hours, then check.
• Adding a large amount
There is an indicator light for the water filter cartridge
on the dispenser that will blink to indicate it is time to
change the water filter. Water filters usually need to be
replaced once every six months. After replacing the filter,
press and hold the Filter Reset button for 3 seconds to
turn off the filter status light.
of food
Remove any objects
blocking air flow.
• Room temperature is
very low (not cycling
often enough)
• Using ice frequently
• Air vents blocked by
objects
REFRIGERATOR section Adjust the
LOCK
is too cold
REFRIGERATOR setting
The Lock button deactivates the temperature controls
and dispenser functions.
• Controls not set
correctly for your
conditions
to the next lowest
number and wait 24
hours, then check.
Press and hold this button for 3 seconds or until the
Lock indicator light is lit.
To disable the Lock function, press and hold the filter
button for seconds or until the Lock indicator light is off.
FREEZER section is too
cold
• Controls not set
correctly for your
conditions
Adjust the FREEZER
setting to the next lowest
number and wait 24
hours, then check.
ICE PLUS
Press this button once to activate the increased ice
making function. The ICE PLUS icon on the display panel
will illuminate when activated. The Ice Plus function runs
the freezer compartment at the coldest settings for a
24 hour period to increase ice making. Press the button
again to cancel the Ice Plus function.
ICE MAKER OPERATION
WARNING
PERSONAL INJURY HAZARD
Avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
the cubes. DO NOT place fingers or hands on the
automatic ice making mechanism while the refrigerator
is plugged in.
ADJUSTING CONTROL SETTINGS
Give the refrigerator time to cool down completely
before making final adjustments. It is best to wait 24
hours before doing this. The initial settings mentioned in
“Control Panel Features” section should be correct for
normal household refrigerator use.
A newly-installed refrigerator may take 12 to 24 hours to
begin making ice.
Power Switch
ON / OFF
The refrigerator control functions as the thermostat for
the entire appliance (refrigerator and freezer sections).
The colder the setting, compressor will the longer the
run to keep the temperature colder. The freezer control
adjuststhecoldairflowfromthefreezertotherefrigerator.
Setting the freezer control to a lower temperature keeps
more cold air in the freezer compartment to make it
colder.
If you need to adjust temperatures in the refrigerator or
Feeler Arm
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
USING YOUR REFRIGERATOR
The ice maker will produce 12 cubes per cycle,
ITEMS
Fish
HOW TO STORE
approximately 140-150 cubes in a 24 hour period,
depending on freezer compartment temperature, room
temperature, number of door openings and other
operating conditions.
Consume fish or seafood the
same day purchased.
Chef Fresh
Leftovers
Store any meat in original airtight,
moisture-proof
Rewrap if necessary.
packaging.
If the refrigerator is used before the water connection is
made to the ice maker, set the power switch to OFF (O).
Throw away the first few batches of ice to allow the water
line to clear.
Cover leftovers with plastic
wrap or aluminum foil. Plastic
containers with airtight lids can
also be used.
Be sure nothing interferes with the sweep of the feeler
arm. When the bin fills to the level of the feeler arm, the
ice maker will stop producing ice.
It is normal for several cubes to be stuck together. If ice
is not used frequently, old ice cubes will become cloudy,
taste stale, and shrink.
STORING FROZEN FOOD
NOTE: For further information about preparing food for
freezing or food storage times, check a freezer
guide or a reliable cookbook.
Packaging
FOOD STORAGE GUIDE
Successful freezing depends on correct packaging.
When you close and seal the package, it must not allow
air or moisture in or out. If it does, you could have food
odor and taste transfer throughout the refrigerator and
also dry out frozen food.
Wrap or store food in the refrigerator in airtight and
moisture-proof material unless otherwise noted. This
prevents food odor and taste transfer throughout the
refrigerator. For dated products, check date code to
ensure freshness.
Packaging Recommendations:
ITEMS
HOW TO STORE
• Rigid plastic containers with “tight-fitting lids”.
• Straight-sided canning/freezing jars.
• Heavy-duty aluminum foil.
Storing Fresh Food Wrap or store food in the
refrigerator in airtight and
moisture-proof material unless
otherwise noted. This prevents
food odor and taste transfer
throughout the refrigerator. For
dated products, check date code
to ensure freshness.
• Plastic-coated paper.
• Non-permeable plastic wraps.
• Specified freezer-grade self-sealing plastic bags.
Follow package or container instructions for proper
freezing methods.
Butter or
margarine
Store opened butter in a covered
dish or in a closed compartment.
When storing a larger quantity,
wrap in freezer packing and
freeze.
Do not use:
• Bread wrappers
• Containers without tight lids
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable wrap
Cheese
Store in original packaging until
you are ready to use it. Once
opened, tightly rewrap with
plastic wrap or aluminum foil.
CAUTION: Do not keep beverage cans or plastic food
containers in the freezer compartment.
They may burst if they freeze.
Vegetables with
skins (carrots,
peppers)
Placeinbagsorplasticcontainers
inside the crisper.
Freezing
Your freezer will not quick-freeze any large quantity of
food. Do not put more unfrozen food into the freezer
than will freeze within 24 hours [no more than 2 to 3 lbs
of food per cubic foot (0,9 to 1,35 kg per cubic meter) of
freezer space]. Leave enough space in the freezer for air
to circulate around packages. Be careful to leave enough
room at the front so the door can close tightly.
Fruit
Wash and let dry; store in plastic
bags in the refrigerator. Do not
wash or pit berries until you
are ready to eat them. Berries
should be selected and kept in
their original packaging (if there
is any) or in a paper bag closed
halfway and set on a shelf.
Food storage times will vary according to the quality and
type of food, the type of packaging or wrap used (airtight
and moisture-proof) and the storage temperature. Ice
crystals inside a sealed package are normal. This simply
means that moisture in the food and air inside the
package have condensed, creating ice crystals.
Leafy Vegetables
Remove original packaging and
trim any dirty or discolored parts.
Wash in cold water and drain.
Place in a plastic bag or plastic
container and store in the crisper.
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
USING YOUR REFRIGERATOR
NOTE: Allow hot foods to cool at room temperature for
place easily, twist the drive device slightly.
30 minutes, then package and freeze. Cooling
hot foods before freezing saves energy.
• Hold the ice storage bin and pull it out while slightly
lifting it
shown in the figure.
• To assemble the ice storage bin, push it while slightly
lifting it
Your refrigerator has a mechanism that dispatch cool • Make sure it is fully engaged into the auger drive
water and ice cubes without open the door.
WATER AND ICE DISPENSER
.
.
• Tray can be easily removed by pressing and pulling it.
• First push the tray in the area with the word ‘PUSH’,
then place your finger in the center hole and upwards,
finally takes out the tray.
ICE MAKER COVER
If you need access to the ice maker, follow these steps:
• Lift the ice shelf
figure below.
and pull it out as shown in the
WARNING
Do not put your hands into the water
& ice dispenser opening. Doing so
may cause an injury to your hand.
DOOR RACK AND SUPPORT
CAUTION
Your refrigerator and freezer features racks which can
easily be arranged for packaged products.
When opening the container with
the small opening, use it near the
opening of the water or ice dispenser
as close as possible.
• Lift the door rack holding both sides and pull it out
in
direction.
ICE STORAGE BIN
The ice bin stores the ice cubes made by the ice maker. If
you need to remove the ice storage bin, do so as follows:
NOTE: Use both hands to remove the ice bin to avoid
dropping it. If the ice bin does not slide into
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
USING YOUR REFRIGERATOR
SNACK PAN
HUMIDITY CONTROLS
• To remove the snack pan cover, pull out the snack pan
compartment a bit to the front , then lift the front
You can control the amount of humidity in the
moisture sealed crispers. Adjust the control to any
setting between “HIGH” and “LOW”.
part of the snack pan compartment later raises a little
the snack pan compartment until it leaves the top of
the shelf as shown in , and take it out.
“HIGH”: Keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
“LOW”: Keeps moist air out of the crisper for best
storage of fruits or vegetables with skins.
CRISPER AND CRISPER COVER
The crisper allows for better conservation of fruits and
vegetables.
• To remove the crisper compartment cover, pull out the
crisper compartment a bit to the front
, lift the front
part of the cover as shown in , and take it out .
REFRIGERATOR SHELVES
CAUTION
Make sure to keep shelf horizontal while
removing; otherwise it may drop.
The refrigerator compartment shelf is adjustable so
that you can place it at a height according to space
requirement of foods.
Sliding out Shelf:
• Pull the shelf towards you , then lift both front and
• To remove the crisper compartment, pull the crisper
compartment to the front until it stops. Then slightly
rear while taking it out
.
lift the crisper compartment while pulling it out
.
CAUTION
Be careful when pulling out the shelf. If you apply
too much force, it may hit the refrigerator door
and damage it or you could hurt yourself.
CAUTION
When removing the crisper compartment you will
see the water tank. Do not remove it, or water leakage
may result. The water tank is not a removable part.
Door
Tank
Download from Www.Somanuals.co1m7. All Manuals Search And Download.
USING YOUR REFRIGERATOR
Fixed Shelf:
• Lightly lift up the front part of the shelf
towards you ,then take it out while lifting the rear part
of shelf
to pull it
.
FREEZER SHELF
To assemble or disassemble the freezer shelf, follow the
next steps:
• Lift the left part of the shelf a bit. Lift it to the direction
, push the right part to the direction and take it out.
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
FILTER
• Push the water filter up into the filter receptacle and
rotate it clockwise to lock it into place. Once installed
correctly, the lock symbol should be facing you and
you should not be able to rotate the filter clockwise
anymore.
WATER FILTER
Filter Reset: When the filter icon turns on, you
have to change the water filter. Press the Filter
button for 3 seconds to turn the icon off.
Before removing or installing water filter:
• IMPORTANT: Turn off household water supply.
• Take out the top shelf and move it to the lowest level.
NOTE: After installation, if you notice that the lock symbol
is not facing you or you can continue to rotate
the filter clockwise; remove the filter and repeat
installation to prevent water leaks.
Removing the Water Filter
• Remove old filter by turning it counterclockwise a
quarter turn and pulling it down. The substitute cap
must be retained for the future. If the filter is removed
and not replaced, it is necessary to reinstall the
substitute cap to prevent water leaks from the filter
housing.
After installing the Water Filter
• Replace the shelf to the initial position.
• After installing filter, turn on household water supply.
• Dispense 2,5 gallons (9,46 liters) of water to purge the
system, depressing and releasing the dispenser pad in
cycles of 30 seconds ON and 60 seconds OFF. Open
the refrigerator door and check the shelf area for water
leaks.
To purchase or replace water filters, call your Service
Center. Refer to the Warranty Card to obtain the
telephone number of the Service Center near you and
ask for part no. 5231JA2002A or ADQ72910901.
Installing the Water Filter
• Remove the red cap from the filter.
• Hold the filter with the unlock symbol
facing
towards you as shown in the figure below. Insert the
filter into the filter receptacle on the right side of the
refrigerator compartment.
Download from Www.Somanuals.co1m9. All Manuals Search And Download.
FILTER
Performance Data Sheet
Models Number 5231JA2002A-S
Use with replacement cartridge 5231JA2002A
This system has been tested according to NSF/ANSI Standards 42 for the reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a concentration less than
or equal to the permissible limit for water leaving the system as specified in NSF/ANSI 42.
System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction
of Chlorine Taste and Odor and Nominal Particulate Class III.
*
Capacity: 500 gal (1,892 L)
Influent Challenge
Concentration.
Units apply to
each row
NSF % reduction
req. or Max
permissible
product water
concentration
Average
Influent
Concentration
Avg. Product
Water
Concentration Reduction
Average
%
Substance
Nominal Particulate
Class I Particle size: ›0.5 to ‹1 um
At least 10,000
particles/ml
24,333
1,9
915
96
≥ 85%
≥ 50%
Chlorine taste and odor
Class III
2.0 mg/L 10%
0,07
96,4
Note that while the testing was performed under standard laboratory conditions, actual performance may vary.
Application Guidelines / Water Supply Parameters
CAUTION
Service flow
0,5 gpm (1,89 lpm)
To reduce the risk of property damage due to water
leakage:
• Read and follow Use instructions before installation
and use of this system.
Water pressure
20 - 125 psi (138 - 862 kPa)
Water temperature 33 ºF - 100 ºF (0,6 ºC - 38 ºC)
• Install on COLD water lines only. Comply with all
state and local plumbing codes.
• Install a pressure limiting device and water hammer
arrester for inlet water pressures exceeding 80
psi (552 kPa). Refer to Uniform Plumbing Code,
Sections 608.2 and 609.10.
• Never install or operate where inlet water pressure
may exceed 120 psi (827 kPa).
WARNING
To reduce the risk associated with ingestion of
contaminants due to use with water that is micro
biologically unsafe or of unknown quality. Do not
use with water that is micro biologically unsafe or of
unknown quality without adequate disinfection before
or after the system.
• Protect filter from freezing. Remove filter in
temperatures below 33 °F (0.6 °C).
• Replace cartridge at specified service interval.
Cartridge MUST be replaced at least every 6 months.
Systems must be installed and operated in accordance
with manufacturer’s recommended procedures and
guidelines.
To purchase or replace water filters call your Service
Center. Refer to the Warranty Card to obtain the
telephone number of the Service Center near you and
ask for part no. 5231JA2002A or ADQ72910901.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING
PLASTIC PARTS (covers and panels)
WARNING
EXPLOSION HAZARD
Do not use window sprays, abrasive cleaners, or
flammable fluids. These can scratch or damage the
material. Use a clean sponge or soft cloth and a mild
detergent in warm water. Wash, rinse and dry all surfaces
thoroughly.
BACK COVER
Use non-flammable cleaner. Failure to do so can result
in death, explosion, or fire.
WARNING
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box. Failure to
do so could result in death or serious injury
Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about once
a month to prevent odors. Wipe up spills immediately
GENERAL CLEANING TIPS
NOTE: Back Cover should only be removed by a qualified
• Unplug refrigerator or disconnect power.
• Remove all removable parts, such as shelves, crispers,
etc. Refer to sections in “Using Your Refrigerator” for
removal instructions.
technician.
Clean the vents on the back cover.
Use a vacuum cleaner with the
brush attachment, at least twice
a year to keep your refrigerator
• Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.
• Hand wash, rinse and dry all surfaces thoroughly.
• Plug in refrigerator or reconnect power.
BACK
working efficiently.
COVER
LIGHT (LED) REPLACEMENT
OUTSIDE
NOTE: Do not remove the LED, it is only to be removed
by a qualified technician.
Waxing external painted metal surfaces helps provide
rust protection. Do not wax plastic parts. Wax painted
metal surfaces at least twice a year using appliance wax
(or auto paste wax). Apply wax with a clean, soft cloth.
POWER INTERRUPTIONS
1. If the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and
frozen.
Do not use wax on stainless steel exteriors. Use a
product specially designed for polishing stainless steel
appliances, or clean with a soft cloth or clean sponge and
a mild detergent dissolved in warm water. Dry thoroughly
with a soft cloth.
2.If the power will be out for more than 24 hours:
a) Remove all frozen food and store it in a frozen food
locker.
NOTE: Avoid door surface contact with chemical
products that contain Phosphate or Chlorine,
such as degraders, detergents (containing TSP)
and bleaches.
OR
b) Place 2 lbs. (1 kg) of dry ice in the freezer for every
cubic foot (28 L) of freezer space. This will keep the food
frozen for two to four days. While handling dry ice, wear
gloves to protect your hands from frostbite.
INSIDE WALLS
WARNING
NOTE: Allow freezer to warm up so cloth will not stick.
SUFFOCATION HAZARD
To help remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm
water. Mix 2 tablespoons baking soda to 1 quart of water
(26 g soda to 1 liter water.) Be sure the baking soda is
completely dissolved so it does not scratch the surfaces
of the refrigerator.
When using dry ice, provide adequate ventilation,
Dry ice is frozen carbon dioxide (CO2). When it
vaporizes, it can displace oxygen, causing dizziness,
light-headedness, unconsciousness and death by
suffocation. Open a window and do not breathe the
vapors.
OR
DOOR LINERS AND GASKETS
c) If neither a food locker nor dry ice is available, consume
or dispose of food at once.
Do not use cleaning waxes, concentrated detergent,
bleaches, or cleaners containing petroleum on plastic
refrigerator parts. Use a clean sponge or soft cloth and
a mild detergent in warm water. Wash, rinse and dry all
surfaces thoroughly.
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
CARE AND CLEANING
REMEMBER: In a power failure, a full freezer stays cold
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they don’t scrape the floor.
See the “Door Alignment” section.
longer than a partially filled one. If you see that food
contains ice crystals, it may be affected. If the condition
of the food is poor, or if you feel it is unsafe, dispose of it. 8.Tape the doors shut and tape the power cord to the
refrigerator cabinet.
WARNING
DO NOT refreeze frozen foods which have thawed
completely. The United States Department of
When you get to your new home, put everything back
and refer to the “Refrigerator Installation” section for
setup instructions.
Agriculture in Home and Garden Bulletin No. 69 says:
...You may safely refreeze frozen foods that have thawed
WHEN YOU SHOULD SET THE ICE MAKER
if they still contain ice crystals or if they are still cold-
POWER SWITCH TO OFF (O)
below 40 °F (4 °C). ...Thawed ground meats, poultry
• When the water supply will be shut off for several
or fish that have any off-odor or off-color should not
hours.
be frozen and should not be eaten. Thawed ice cream
• When the ice storage bin is removed for more than a
should be discarded.
minute or two.
If the odor or color of any food is poor or questionable,
• When the refrigerator will not be used for several days.
dispose of it. The food may be dangerous to eat. Even
partial thawing and refreezing reduces the eating
quality of foods, particularly fruits, vegetables and
prepared foods.
NORMAL SOUNDS YOU MAY HEAR
The eating quality of red meats is affected less than
• The ice maker water valve will buzz as the ice maker
that of many other foods. Use refrozen foods as soon
as possible to save as much of their quality as you can.
fills with water. If the power switch is in the ON position,
it will buzz even if it has not yet been hooked up to
water. To stop the buzzing, move the power switch to
OFF position.
WHEN YOU GO ON VACATION
If you choose to leave the refrigerator ON while you
NOTE: Keep the power switch in the ON position before
are away, follow these steps to prepare your refrigerator
the water line is connected can damage the ice
before you leave.
maker.
1. Use up any perishables and freeze other items.
2.Empty the ice bin.
• You will hear the sound of cubes dropping into the bin
and water running in the pipes as the ice maker refills.
3.Turn OFF the Ice maker. NOTE: If the ambient
temperature will drop below freezing, have a quailed
service technician drain the water supply system (on
some models) to prevent serious property damage
due to possible flooding from ruptured water lines or
connections.
If you choose to turn the refrigerator OFF before you
leave, follow these steps:
1. Remove all food from the refrigerator and empty ice
bin.
2.Unplug refrigerator.
3.Clean refrigerator, wipe, and dry well.
4.Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building up.
WHEN YOU MOVE
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all
frozen food in dry ice.
2.Unplug refrigerator.
3.Clean refrigerator, wipe, and dry well.
4.Empty water from the defrost pan.
5.Clean, wipe and dry thoroughly.
6.Take out all removable parts, wrap them well and tape
together so they don’t shift and rattle during the move.
Refer to sections in Using your Refrigerator for removal
instructions.
7. Depending on the model, raise the front of the
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
UNDERSTANDING SOUNDS YOU MAY HEAR
Your new refrigerator may make sounds that your old • The defrost timer will click when the automatic defrost
one did not make. Because the sounds are new to you,
you might be concerned about them. Most of the new
sounds are normal. Hard surfaces, like the floor, walls
cycle begins and ends. The thermostat control (or
refrigerator control, depending on the model) will also
click when cycling on and off.
and cabinets, can make the sounds seem louder than • Rattling noises may come from the flow of refrigerant,
they actually are. The following list describes the kinds of
sounds and what may be making them.
the water line, or items stored on top of the refrigerator.
• Your refrigerator is designed to run more efficiently
to keep your food items at the desired temperature.
The high efficiency compressor may cause your new
refrigerator to run longer than your old one, and you
may hear a pulsating or high-pitched sound.
• You may hear the evaporator fan motor circulating the
air through the refrigerator and freezer compartments.
• As each cycle ends, you may hear a gurgling sound
due to the refrigerant flowing in your refrigerator.
• Contraction and expansion of the inside walls may
cause a popping noise.
• Water dripping on the defrost heater during a defrost
cycle may cause a sizzling sound.
• You may hear air being forced over the condenser by
the condenser fan.
• You may hear water running into the drain pan during
the defrost cycle.
Problem
Possible Causes
Solutions
• The power supply cord is unplugged. • Firmly plug the cord into a live outlet with proper
voltage.
• A household fuse has blown or • Replace the fuse or reset the circuit breaker.
circuit breaker tripped.
REFRIGERATOR
DOES NOT
OPERATE
• The refrigerator control is set to the • Refer to the “Control Panel Features” section.
OFF position.
• Refrigerator is in the defrost cycle.
• The refrigerator is not resting solidly • Floor is weak or uneven or leveling legs need
on the floor. adjusting. See “Door Alignment” Section.
• Wait about 30 minutes for defrost cycle to end.
VIBRATION OR
RATTLING NOISE
• The power supply cord is unplugged. • Firmly plug the cord into a live outlet with proper
LED (LAMP) DO
NOT WORK
voltage.
• LED Light has burned out.
• See the “Light (LED) Replacement” section.
• The refrigerator that was replaced • Modern refrigerators with more storage space
was an older model. require more operating time.
• The room temperature is hotter • The motor will run longer under warm conditions.
than normal.
At normal room temperatures, expect your motor
to run about 40% to 80% of the time. Under
warmer conditions, expect it to run even more
often.
• The refrigerator was recently • The refrigerator will take up to 24 hours to cool
plugged in and the refrigerator
control was set correctly.
• The door is opened often or a large • Adding food and opening the door warms the
amount has just been added.
completely.
COMPRESSOR
MOTOR SEEMS TO
RUN TOO MUCH
refrigerator. It is normal for the refrigerator to
run longer in order to conserve energy, try to get
everything you need out of the refrigerator at
once, keep food organized so it is easy to find and
close the door as soon as the food is removed.
See the “Food Storage Guide” section.
• The refrigerator control was not • See the “Adjusting Control Settings” Section.
set correctly for the surrounding
conditions.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Problem
Possible Causes
Solutions
• The doors are not closed completely. • Push the doors firmly shut. If they will not shut all
COMPRESSOR
the way, see Doors will not close completely below.
MOTOR SEEMS TO • The condenser coils are dirty.
• This prevents air transfer and makes the motor
work harder. Clean the condenser coils. Refer to
the “Care and Cleaning” section.
RUN TOO MUCH
• The refrigerator is not level.
• See the “Refrigerator Installation” and “Door
Alignment” sections to level refrigerator.
• Food packages are blocking the • Rearrange food containers to clear door and door
door open.
shelves.
• The ice bin, crisper cover, pans, • Push bins all the way in and put crisper cover, pans,
shelves, door bins or baskets are out
of position.
• The gaskets are sticking.
shelves and baskets into their correct positions.
See the “Using your Refrigerator” Section.
• Clean gaskets and the surface that they touch.
Rub a thin coat of paraffin wax on the gaskets
after cleaning.
DOORS WILL NOT
CLOSE
COMPLETELY
• The refrigerator wobbles or seems • Level the refrigerator. Refer to the “Door
unstable. Alignment” section.
• The doors were removed during • Remove and replace the doors according to the
product installation and not properly
replaced.
“Removing and Replacing Refrigerator Doors”
section or call qualified service technician.
• The gaskets are dirty or sticky.
• Clean gaskets and the surfaces that they touch.
Rub a thin coat of appliance polish or kitchen wax
on the gaskets after cleaning.
THE DOORS ARE
DIFFICULT TO
OPEN
• The door is reopened within a short • When you open the door, warmer air enters the
time after having been opened.
refrigerator. As the warm air cools, it can create
a vacuum. If the door is hard to open, wait 5
minutes to allow the air pressure to equalize, then
see if it opens more easily.
• The doors are opened often.
• When the door is opened, warm humid air is
allowed into the refrigerator. The more the door is
opened, the faster the humidity builds up, and the
more warm air the refrigerator must cool. In order
to keep the refrigerator cool, try to get everything
you need out of the refrigerator at once, keep food
organized so it is easy to find and close the door
as soon as the food is removed.
• The control is not set correctly for • Refer to the “Control Panel Features”. Wait 24
the surrounding conditions.
hours for temperatures to stabilize or even out.
If the temperature is too cold or too warm, adjust
the setting one level at a time.
• A large amount of food has just • Adding food warms the refrigerator. It can take a
TEMPERATURE IS
TOO WARM OR
THERE IS
been added to the refrigerator or
freezer.
• The food is not packaged correctly. • Wrap food tightly and wipe off damp containers
prior to storing in the refrigerator to avoid moisture
accumulation. If necessary, repackage food
according to the guidelines in the “Food Storage
Guide” section.
• The doors are not closing • See “Doors will not close completely”.
completely.
• The weather is humid.
few hours for the refrigerator to return to normal
temperature.
INTERIOR
MOISTURE
BUILDUP
• In humid weather, air carries moisture into
refrigerator when doors are opened.
• A self-defrost cycle was completed. • It is normal for droplets to form on the back wall
after the refrigerator self-defrosts.
• The air vents are blocked. Cold air • Locate air vents by using your hand to sense
circulates from the freezer to the
fresh food section and back again
through air vents in the wall dividing
the two sections.
airflow and move all packages that block vents
and restrict airflow. Refer to “Ensuring Proper Air
Circulation” section for the location of air vents.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Problem
CUBES
PRODUCED BY
ICE MAKER ARE
TOO SMALL
Possible Causes
Solutions
• Water shutoff valve connecting • Call a plumber to clear the valve.
refrigerator to water line may be
clogged.
• The ice maker was recently installed. • Discard first few batches of ice to avoid discolored
or off-flavored ice.
• The ice has been stored for too • Throw away old ice and make new supply.
long.
• The food has not been wrapped • Rewrap foods since odors may migrate to the ice
ICE HAS BAD
TASTE OR ODOR
tightly in either compartment.
if food is not wrapped properly.
• The water supply contains minerals • A new filter may need to be installed to eliminate
such as sulfur.
taste and odor problems.
• The interior of refrigerator needs • See “Care and Cleaning” section.
cleaning.
• Ice storage bin needs cleaning.
• Empty and wash bin. Discard old cubes.
• The refrigerator is defrosting.
• The water will evaporate. It is normal for water to
drip into the defrost pan.
• Expect that the water in the defrost pan will take
longer to evaporate. This is normal when it is hot
or humid.
THERE IS WATER
IN THE DEFROST
DRAIN PAN
• It is more humid than normal.
THE
• The sounds may be normal for your • Refer to the “Understanding sounds you may
REFRIGERATOR
SEEMS TO MAKE
TOO MUCH NOISE
refrigerator.
hear” section.
FROST OR ICE
CRYSTALS ON
FROZEN FOOD
• The door is not closing properly.
• The door is opened often.
• See “Doors will not close completely” above.
• When the door is opened, warm, humid air is
allowed in the freezer resulting in frost.
THE ICE MAKER IS • The freezer temperature is cold • Wait 24 hours after hook-up for ice production.
enough to produce ice.
• Door left open.
See the “Control Panel Features” section.
• Check to see if something is holding the door
open.
NOT PRODUCING
ICE OR ICE CUBES
ARE FREEZING
TOO SLOWLY
• Ice maker power switch on OFF (O) • Move the switch to the ON (I) position.
position.
• Water supply turned off or not • See the “Connecting the Water Line” section.
AUTOMATIC ICE
MAKER DOES
NOT WORK
connected.
• Freezer compartment too warm.
• Wait 24 hours for the freezer to reach its ideal
temperature.
• Piled up the cubes in the storage • Level cubes by hand or shake the bin occasionally.
bin cause the ice maker to shut off.
• All the doors are not closed • Ice will not dispense if any of the refrigerator doors
completely.
• The dispenser display is locked.
are left open.
• Press and hold the Lock button for 3 seconds to
unlock the control panel and dispenser.
• Ice is not selected on the dispenser • The dispenser can be set for ice or water. Make
certain that the control panel is set for the proper
operation. Press the dispenser button on the
control panel to cycle through the ice and water
options.
• The ice dispenser is not used often. • Check the ice bin for ice cubes clumping/ sticking
together. If they are, break up the ice cubes allow
for proper operation.
NOT DISPENSING
ICE
• Ice bin is not installed correctly.
• Be sure to install the ice bin firmly into position.
• Wait 24 hours after ice maker installation for ice
production to begin. Wait 72 hours for full ice
production.
• New installation.
• Ice cubes are stuck in the delivery • Use a plastic utensil to clear the delivery chute.
chute.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Problem
Possible Causes
Solutions
• The ice dispenser is stalling while • Change the ice button from “crushed” to “cubed”.
dispensing “crushed” ice.
If cubed ice dispenses correctly, depress the
button for“crushed” ice and begin dispensing
again.
NOT DISPENSING
ICE
• Ice maker power switch in the OFF • Move the switch to the ON (I) position.
(O) position.
• Water supply turned off or not • See the “Connecting the Water Line” section.
connected.
• The dispenser display is locked.
• Press and hold the Lock button for 3 seconds to
unlock the control panel and dispenser.
• Flush and fill the water system.
• New installation.
• Refrigerator or freezer doors are not • Water will not dispense if any of the refrigerator
closed properly.
doors are left open.
• Water supply turned off or not • See the “Connecting the Water Line” section.
connected.
• The water pressure is less than 40 • The water pressure to the home affects the flow
NOT DISPENSING
WATER
PSI.
from the dispenser.
• Home filter or reverse osmosis • This can decrease water pressure. It is
system is used.
recommended not to connect the supply line to
a reverse osmosis system for optimal operation.
• The dispenser is not set for water • The dispenser can be set for ice or water. Make
dispensing.
certain that the control panel is set for the proper
operation. Press the dispenser button on the
control panel to cycle through the ice and water
options.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Customer Information Center
USA, Consumer User
1-800-243-0000
1-888-865-3026
1-888-542-2623
USA, Commercial User
CANADA
Register your Product Online!
Download from Www.Somanuals.com. All Manuals Search And Download.
|