Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
HS102
HS102G
Model number
Serial number
:
:
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP PROJECTOR
Warning
This is a class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Special Menu Options
Safety Instructions....................................4
Selecting Language ........................................24
Using RATIO Function ....................................24
Overscan Function..........................................24
Flip horizontal Function...................................25
Flip vertical Function.......................................25
Sleep time Function ........................................26
Auto sleep Function ........................................26
Presentation timer Function............................27
Using Keystone Function................................27
Using Blank Function......................................28
Selecting Blank image ....................................28
LED mode Function ........................................29
Names of parts
Main Body.......................................................7
Connecting Part ..............................................7
Control Panel ..................................................8
Remote Control...............................................9
Installing Batteries...........................................9
Accessories.....................................................10
Optional Extras ...............................................10
Installing and Composition
Installation Instructions ...................................11
How to install the projector using the tripod ...12
Basic Operation of the Projector.....................13
Using Kensington Security System.................14
Turning on the Projector .................................15
Turning off the Projector .................................15
Focus and Position of the Screen Image........16
Selecting source mode ...................................16
Screen Menu Options
Auto configure Function..................................30
Using Phase Function.....................................30
Using Clock Function......................................30
Using Horizontal Function...............................31
Using Vertical Function ...................................31
Connection
USB
Connecting to a Desktop PC ..........................17
Connecting to a Notebook PC ........................17
Connecting to a Video Source........................17
Connecting to a DVD......................................18
Connecting to a D-TV Set-Top Box ................18
To use the USB device ...................................32
Photo List........................................................33
Music List ........................................................35
Movie List........................................................37
DivX Audio Language & Subtitle Language....38
Function
Video Menu Options
Information
Supported Monitor Display..............................39
Maintenance....................................................40
Specifications..................................................41
Adjusting Video ...............................................19
Picture mode...................................................20
Color Temperature Control..............................20
Smart picture Function....................................21
Black level Function........................................21
Keypad Sound Function..................................22
Keypad LED Function.....................................22
Screen Capture Function................................23
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Safety Instructions
Please take note of the safety instructions to prevent any potential accident or misuse of the projector.
➟ Safety Instructions are given in two forms as detailed below.
WARNING : The violation of this instruction may cause serious injuries and even death.
NOTES : The violation of this instruction may cause light injuries or damage to the projector.
After reading this manual, keep it in the place that the user always can contact easily.
➟
Indoor Installation
WARNING
Do not place the Projector in direct
sunlight or near heat sources such
Do not place inflammable materi-
als beside the projector
Do not allow children to hang on
the installed projector.
as radiators, fires and stove etc.
It may cause the projector to fall, caus-
ing injury or death.
This may cause a fire hazard !
This may cause a fire hazard !
Indoor Installation
NOTES
Disconnect from the mains and
remove all connections before
moving.
Do not place the projector close
to sources of steam or oil such
as a humidifier.
Do not place the projector where
it might be exposed to dust.
This may cause a fire hazard or
damage to the unit!
This may create a fire hazard or an
electric shock hazard !
When installing the projector on a
table, be careful not to place it
near the edge.
Only use the projector on a level
and stable surface.
Ensure good ventilation around the
projector. The distance between
the projector and the wall should
be more than 30cm/12 inches.
It may fall and cause injury and/or
damage to the unit.
This may cause the projector to fall
causing serious injury to a child or
adult and serious damage to the
projector.
An excessive increase in its internal
temperature may cause a fire hazard or
damage to the unit!
Only use a suitable stand.
Do not place the projector directly on a carpet, rug or place where
ventilation is restricted.
Do not block the vents of the pro-
jector or restrict air-flow in any way.
This would cause its internal temperature to increase and might create a fire
hazard or damage the unit.
This would cause the internal tempera-
ture to increase and could cause a fire
hazard or damage to the unit!
Outdoor Installation
WARNING
Do not use the projector in a damp place such as a bathroom where it is likely to get wet.
This may cause a fire or an electric shock hazard !
Power
WARNING
Earth wire should be connected.
The mains plug should be inserted
Do not place heavy objects on
fully into the power outlet to avoid a the power cord.
fire hazard !
If the earth wire is not connected, there is a
possible danger of electric shock caused by
the current leakage.
If grounding methods are not possible, a
separate circuit breaker should be installed
by a qualified electrician.
Do not connect ground to telephone wires,
lightning rods or gas pipe.
This may cause a fire or an electric
shock hazard !
This may cause a fire hazard or damage
the unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Power
WARNING
NOTES
Do not use too many plugs on the Mains multi-outlet.
It may result in overheating of the outlet and causes a fire hazard !
Power
Never touch the power plug with
a wet hand
Hold the plug firmly when unplug- Prevent dust collecting on the
ging. If you pull the cord, it may
be damaged.
power plug pins or outlet.
This may cause an electric shock
hazard !
This may cause a fire hazard !
This may cause a fire hazard !
Do not plug when the power cord
or the plug is damaged or any
part of the power outlet is loose.
Ensure the power cord does not
come into contact with sharp or
hot objects such as a heater.
Place the projector where people
will not trip or tread on the power
lead.
This may cause a fire or an electric
shock hazard or damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not turn the projector On/Off by plugging-in or unplugging the power plug to the wall outlet.
(Do not use the power plug for switch.)
It may cause mechanical failure or could cause an electric shock.
Using
WARNING
Do not place anything containing In case of impact shock or damage Do not allow any objects to fall
liquid on top of the projector such to the projector switch it off and
into the projector.
as flowerpot, cup, cosmetics or
candle.
unplug it from the mains outlet and
contact your service center.
This may cause an electric shock
hazard or damage to the unit!
This may cause a fire hazard or
damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
If water is spilt into the projector
unplug it from the mains supply
outlet immediately and consult
your Service Agent.
Dispose of used batteries care-
fully and safely.
In the event that an image does
not appear on the screen please
switch it off and unplug it from
the mains supply and contact
your Service Agent.
In the case of a battery being
swallowed by a child please consult a
doctor immediately.
This may cause an electric shock
hazard or damage to the unit!
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not touch metal parts during or
soon after operation since the
vents will remain very hot!
Do not remove any covers. High
risk of Electric Shock!
Don’t look directly onto the lens
when the projector is in use. Eye
damage may occur!
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is,a single outlet circuit which
powers only that appliance and has no additional outlets or branch circuits.Check the specification page
of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,loose or damaged wall outlets, extension cords,
frayed power cords,or damaged or cracked wire insulation are dangerous.Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance,and if its appearance indi-
cates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Using
WARNING
Never touch the wall outlet when
there is leakage of gas, open the
windows and ventilate.
Do not drop the projector or allow
impact shock.
Don’t look at laser beam directly
as it can cause eye damage!
This may cause mechanical failure or
personal injury !
It can cause a fire or a burn by a
spark.
Using
NOTES
Do not place heavy objects on
top of projector.
Take care not to impact the lens
particularly when moving the
projector.
Do not touch the lens of the pro-
jector. It is delicate and easily
damaged.
This may cause mechanical failure or
personal injury!
Do not use any sharp tools on the projector as this will damage the casing.
Cleaning
WARNING
Do not use water while cleaning
the projector
In the unlikely event of smoke or
a strange smell from the projector,
switch it off , unplug it from the
wall outlet and contact your
dealer or service centre.
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
This may cause damage to the
projector or an electric shock hazard.
This may cause a fire or an electric
shock hazard or damage to the unit!
Cleaning
NOTES
Contact the Service
Center once a year to
clean the internal
When cleaning the plastic parts such as projector case, unplug the power and
wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet
cloth. Especially, never use cleanser (glass cleaner), automobile or industrial
shiner, abrasive or wax, benzene, alcohol etc., which can damage the
product. Use an air spray or soft cloth that is moist with a neutral detergent
and water for removing dust or stains on the projection lens.
parts of the projector.
Accumulated dust can
cause mechanical failure.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
Others
WARNING
Do not attempt to service the projector yourself. Contact your dealer or service centre.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty !
Others
NOTES
Do not mix new batteries with old
batteries.
Be sure to unplug if the projector
is not to be used for a long peri-
od.
Only use the specified type of
battery.
This may cause the batteries to over-
heat and leak.
This could cause damage to the
remote control.
Accumulated dust may cause a fire
hazard or damage to the unit!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Names of parts
Main Body
*
The projector is manufactured using high-precision technology. You may, however, see on the Projector
screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the
manufacturing process and does not always indicate a malfunction.
Focus ring
Control panel
Connecting Part
Headphone port
IR (Remote control sensor)
Kensington Security
System Connector
(Refer to page 14)
A/V IN
DC IN
USB
RGB IN (PC/DTV)
*
Do not block the IR port for normal operation of remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Control Panel
SOURCE Button
Switches to RGB, Video mode.
SOURCE
OK Button
Checks present mode and
saves the change of functions.
MENU Button
Selects or closes menus.
POWER Button
Turn ON/OFF the projector.
/
/
/
Button
Adjusts functions of menus.
When the OSD is not dispalyed, adjusts
volume with
/
Button
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Remote Control
MUTE Button
POWER Button
SOURCE Button
KEYSTONE +, - Button
MENU Button
VOLUME +, - Button
RETURN Button
OK,
/
/
/
Button
BLANK Button
RATIO Button
AUTO Button
USB Button
USB control Buttons
FAV Button
SUBTITLE Button
PAGE EButton
PAGE DButton
Installing Batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
(B)
(A)
1. Remove the battery compartment 2. Insert the battery with the positive 3. Replace the cover.
cover by sliding the cover in the
direction of the arrow (A). Pull out
the cover in the direction of the
arrow (B).
side facing up.
G
Only use a 3V lithium battery (CR2032).
G
G
Dispose of used batteries according to local ordinance regulations.
Remove the battery when not using the projector for prolonged periods.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Accessories
Polishing Cloth
3V Battery
Owner’s manual
Remote Control
CD Owner’s manual
Power Cord
Computer Cable
A/V Cable
Adapter
RGB to Component Cable
Portable bag
(*Only for HS102G model)
G
Use a remote control up to 6 meters distance and 30 degree (left/right) with-
in the receiving unit scope.
G
We recommend you to use the remote control under 3 meters distance and
30 degree (left/right) when the cables are connected in the back outputs.
30°
30°
Optional Extras
* Contact your dealer to purchase these items.
* Optional parts can be changed without notice to improve the quality of the product, and new optional parts can be added.
Component Cable
Projection Screen
Tripod
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Installing and Composition
Installation Instructions
*
Don’t place the projector in the following conditions. It may cause malfunction or product damage.
Provide proper ventilation for this projector.
GThe projector is equipped with ventilation holes(intake)
on the bottom and ventilation holes(exhaust) on the front.
Do not block or place anything near these holes, or inter-
nal heat build-up may occur, causing picture degradation
or damage to the projector.
GDo not place the projector on a carpet, rug or other
similar surface. It may prevent a adequate ventilation
of the projector bottom. This product should be
mounted to a wall or ceiling only.
GNever push projector or spill any kind of liquid into the
projector.
GLeave an adequate distance(30cm/12 inches or
more) around the projector.
Place this projector in adequate temperature and humidity conditions.
G
G
Install this projector only in a location where adequate temperature and humidity is available. (refer p.41)
Don’t place the projector where it can be covered with dust.
This may cause overheating of the projector.
Do not obstruct the slots and openings of the projector. This may cause overheating and create a fire
hazard.
The projector is manufactured using high-precision technology. You may, however, see tiny black points
and/or bright points (red, blue, or green) that continuously appear on the projector Screen. This is a nor-
mal result of the manufacturing process and does not indicate a malfunction.
To display DTV programs, it is necessary to purchase a DTV receiver (Set-top Box) and connect it to the
projector.
When the remote control does not work during operation.
G
The remote control may not work when a lamp equipped with electronic ballast or a three-wavelength lamp is installed.
Replace those lamps with international standard products to use the remote control normally.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
How to install the projector using the tripod
* You can install this projector using a tripod for the camera. You can assemble the projector instead of the camera
on camera tripod.
Part connected to the projector
Part connected to the tripod
Bottom side of Projector
Camera Tripod
- If you have a camera tripod, assemble the projector to the part connecting to the camera tripod
Finished condition when projector is install on the tripod
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Basic Operation of the Projector
1.Place the projector on a sturdy and horizontal surface with the PC or AV source.
2.Place the projector with the desired distance from the screen. The distance between the projector and the screen
determines the actual size of the image.
3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the
screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page 27.).
4.Connect the cables of the projector to a wall power socket and other connected sources.
projection distance based on the picture format
Screen
X/2
Projection off-set ratio:100%
Screen height (X)
X/2
Projection distance (D)
Y/2
Screen
Screen Width (Y)
43mm
Y/2
Projection distance (D)
4 : 3 Scale
Horizontal Size
(mm)
Diagonal Size
(inch)
Vertical Size
(mm)
Diagonal Size
(mm)
Projection Distance(D)
(mm)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Using Kensington Security System
GThe projector has a ‘Kensington’ Security System Connector on the side panel. Connect the ‘Kensington’
Security System cable as below.
GFor the detailed installation and use of the Kensington Security System, refer to the user’s guide attached
to the Kensington Security System set.
Kensington company that deals with expensive electronic equipment such as notebook PCs or projec-
tors.
G
Kensington Security System is an optional item.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Turning on the Projector
1. Connect power cord correctly.
2. Press the
button on the top cover or the POWER button on the remote control. (The light on the control
panel will be turned on.)
G
G
Press the SOURCE button on the remote control or the SOURCE button on the control panel to select the input signal you want.
When you press the POWER button on the remote control or the
lights for all buttons on the control panel will be turned on.
button on the control panel when you turn on the projector, the
Turning off the Projector
1.Press the
button on the top cover or the POWER button on the remote control.
button on the top cover or the POWER button on the remote control again to turn off the
2.Press the
power.
G When you press POWER button when you turn off the projector, the lights for all buttons on the control panel will be turned off. When
you press any button on the control panel when the projector is turned off, the light only on the POWER LED turned on. (When the
POWER cord is connected.)
Power off?
Please press Power key again.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Composition
Focus and Position of the Screen Image
When an image appears on the screen, check if it is in focus and fits well to the screen.
Focus ring
G To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.
Selecting source mode
1. Press the SOURCE button on the top cover or remote control.
Select
OK
RGB
2. Each press of the
,
button changes the display as below.
RGB
Video
G When you connect the RGB to Component cable to the RGB IN (PC/DTV) terminal and select RGB input, you can receive the Component input.
G DivX mode runs automatically when connects USB device.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connection
Connecting to a Desktop PC
* You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output.
* Refer to page 39 for the supported monitor displays of the projector.
< How to connect >
Connect computer cable to RGB IN (PC/DTV) of the projector.
Connecting to a Notebook PC
< How to connect >
Connect computer cable to RGB IN (PC/DTV) of the
projector.
* If you set your computer to output the signal to both the
display of your computer and the external projector, the
picture of the external projector may not appear properly.
In such cases, set the output mode of your computer to
output the signal only to the external projector. For
details, refer to the operating instructions supplied with
your computer.
Connecting to a Video Source
* You can connect a VTR, a camcorder or any other compatible video image source to the projector.
< How to connect >
a. Connect the A/V IN jack of the projector to the output jacks
of the A/V source with A/V cable.
<VCR>
S
VIDEO
(R) AUDIO
VI
OUT
IN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connecting to a DVD
* The output jacks (Y, PB, PR) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.
< How to connect >
RGB to Component Cable
Component cable
a.After connecting the Component cable of DVD to the RGB
to Component cable, connect it to the RGB IN(PC/DTV)
terminal of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, PB=blue, PR=red)
(R) AUDIO (L)
Y
PB
PR
Component
RGB/DTV
Signal
480i
<DVD>
O
O
O
O
O
O
X
O
O
O
X
480p
720p
1080i
576i
O
576p
Connecting to a D-TV Set-Top Box
* To receive D-TV programmes, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and D-TV Set-Top Box.
< How to connect an RGB source >
a. Connect RGB cable to RGB IN (PC/DTV) of the
projector.
<D-TV Set-Top Box>
HDMI OUTPUT
DTV OUTPUT
(R) AUDIO (L)
DVI OUTPUT
Y
PB
PR
b. Use a DTV receiver with DTV 480p(576p)/720p/1080i mode.
< How to connect a Component source >
RGB to Component Cable
Component cable
a.Connect the D-TV Set-Top Box Component cable with RGB
to Component cable and than connect it to RGB
IN(PC/DTV) of the projector.
<D-TV Set-Top Box>
* When connecting the component cable, match the jack colors
HDMI OUTPUT
DTV OUTPUT
(R) AUDIO (L)
DVI OUTPUT
Y
P
with the component cable.(Y=green, PB=blue, PR=red)
b. Use a DTV receiver with DTV 480p(576p)/720p/1080i mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Function
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to
help with the Projector operation.
* This operating guide explains operation of RGB(PC) mode mainly.
Video Menu Options
Adjusting Video
< RGB mode >
1. Press the MENU button and then use
,
button to select the
menu.
Contrast
Brightness
Color R
Color G
Color B
Reset
50
50
50
50
50
2. Press the
3. Press the
G
,
button to select a video item you want to adjust.
button to adjust the screen condition as you want.
,
Each adjustment of
menu options will not affect other inputs.
menu options for the input sources.
As required, re-adjust
MENU Exit
Move
OK
G
G
To restore the original image condition after changing it, press
after selecting [Reset] item.
When receiving an NTSC signal, the picture item Tint is displayed and can
OK button
< Video mode >
be adjusted.(60Hz only)
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
G
G
button on the control panel.
Clear
Picture mode
Contrast
Brightness
Color
Sharpness
Tint
80
50
50
50
0
MENU Exit
Move
OK
< DivX mode >
Contrast
Brightness
Sharpness
Reset
80
50
50
MENU Exit
Move
OK
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Picture mode
* Use Picture mode function to set the projector for the best picture appearance.
* This function does not work in RGB or DivX mode.
Clear
Picture mode
Contrast
Brightness
Color
Sharpness
Tint
80
50
50
50
0
1. Press the MENU button and then use
,
button to select the
menu.
2. Press the
,
button to select Picture mode item.
3. Press the
,
button to adjust the screen condition as you want.
MENU Prev.
Move
Select
G
Each press of the
Clear
,
button changes the screen as shown below.
Soft
User
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
Color Temperature Control
1. Press the MENU button and then use
,
button to select the
menu.
Normal
Normal
High
On
Color temp.
Smart picture
Black level
2. Press the
,
button to select Color temp. item.
Keypad Sound
Keypad LED
Screen Capture
3. Press the
,
button to make desired adjustments.
On
G
Each press of the
Normal
,
button changes the screen as shown below.
MENU Prev.
Move
Select
Warm
Cool
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Smart picture Function
1. Press the MENU button and then use
,
button to select the
menu.
Normal
Color temp.
2. Press the
,
button to select Smart picture item.
Normal
High
Smart picture
Black level
3. Press the
,
button to make desired adjustments.
On
On
Keypad Sound
Keypad LED
Screen Capture
G
Each press of the
Sports
,
button changes the screen as shown below.
Normal
Film
MENU Prev.
Move
Select
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
Black level Function
1. Press the MENU button and then use
,
button to select the
menu.
Normal
Normal
High
On
Color temp.
2. Press the
,
button to select Black level item.
Smart picture
Black level
3. Press the
,
button to select Low or High.
Keypad Sound
Keypad LED
Screen Capture
On
G
This function works in the following mode : Video
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
MENU Prev.
Move
Select
* What is the Black level function?
When you watch the movie, this function adjusts the set to the best picture
appearance. Adjusting the contrast and the brightness of the screen using the
black level of the screen.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Keypad Sound Function
1. Press the MENU button and then use
,
button to select the
menu.
Normal
Normal
High
On
Color temp.
2. Press the
,
button to select Keypad Sound item.
Smart picture
Black level
3. Press the
,
button to select On or Off.
Keypad Sound
Keypad LED
Screen Capture
On
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
G
MENU Prev.
Move
Select
Keypad LED Function
1. Press the MENU button and then use
,
button to select the
menu.
Normal
Normal
High
On
Color temp.
2. Press the
,
button to select Keypad LED item.
Smart picture
Black level
3. Press the
,
button to select On or Off.
Keypad Sound
Keypad LED
Screen Capture
On
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
G
MENU Prev.
Move
Select
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Screen Capture Function
1. Press the MENU button and then use
,
button to select the
menu.
Normal
Normal
High
Color temp.
2. Press the
,
button to select Screen Capture item.
Smart picture
Black level
3. Press the OK button to capture actual screen image.
On
Keypad Sound
Keypad LED
Screen Capture
On
To set
Confirm Screen Capture
MENU Prev.
Move
OK
OK
Cancel
4. Press the OK button again to save Screen capture image.
G
You can use the captured image as a Blank image.
G
You can not use the remote control when this function is in use.
G
If you want see your captured image, select Captured image in the Blank image
function.
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Special Menu Options
Selecting Language
1. Press the MENU button and then use
,
button to select the
menu.
English
4 : 3
Off
Language
Aspect Ratio
Overscan
2. Press the
,
button to select Language item.
Flip horizontal
Flip vertical
Sleep time
3. Press the
,
button to select the language you want to use.
G
On-Screen-Display (OSD) is displayed in the selected language.
Off
Off
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
Auto sleep
Presentation timer
MENU Prev.
Move
Select
Using RATIO Function
1. Press the RATIO button on the remote control.
Each press of the button changes the display as below.
16:9
4:3
4 : 3
16:9
You can also use this function by using the
button on the control panel.
Overscan Function
1. Press the MENU button and then use
,
button to select the
menu.
English
4 : 3
Off
Language
2. Press the
,
,
button to select Overscan item.
Aspect Ratio
Overscan
3. Press the
buttons.
Flip horizontal
Flip vertical
Sleep time
G
The Overscan function can be adjusted only in RGB, Component and DivX
modes.
Off
Off
Auto sleep
G
G
G
The Overscan function can be adjusted between Off and 10%.
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
Presentation timer
button on the control panel.
MENU Prev.
Move
Select
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Flip horizontal Function
* This function reverses the projected image horizontally.
Use this function when rear projecting an image.
English
4 : 3
Off
Language
1. Press the MENU button and then use
,
button to select the
menu.
Aspect Ratio
Overscan
To flip
2. Press the button to select Flip horizontal item.
,
Flip horizontal
Flip vertical
Sleep time
Off
Off
3. Press the OK button to see reversed image.
Auto sleep
G
Each time you press the
OK button, the image will be reversed.
Presentation timer
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
MENU Prev.
Move
OK
Flip vertical Function
* This function reverses the projected image vertically.
* When you hang the projector upside down from the ceiling ,
you will need to reverse the image vertically and horizontally.
English
4 : 3
Off
Language
Aspect Ratio
Overscan
1. Press the MENU button and then use
,
button to select the
menu.
Flip horizontal
Flip vertical
Sleep time
2. Press the button to select Flip vertical item.
,
To flip
Off
3. Press the OK button to see reversed image.
Off
Auto sleep
Presentation timer
G
Each time you press the
OK button, the image will be reversed.
G
G
MENU Prev.
Move
OK
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
button on the control panel.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Sleep time Function
* The sleep timer turns the projector off at the preset time.
English
4 : 3
Off
Language
1. Press the MENU button and then use
,
button to select the
menu.
Aspect Ratio
Overscan
2. Press the
,
button to select Sleep time item.
Flip horizontal
Flip vertical
Sleep time
3. Press the
,
button to select the desired preset time.
Off
Off
G
You can use this function through the
button on the control panel.
Auto sleep
G
Press the MENU button twice or the RETURN button to exit the menu screen.
Presentation timer
Off
10 Min
20 Min
30 Min
60 Min
90 Min
MENU Prev.
Move
Select
240 Min
180 Min
120 Min
Auto sleep Function
* This function turns the projector off automatically after the preset time is passed
when there is no signal.
English
4 : 3
Off
Language
1. Press the MENU button and then use
,
button to select the
menu.
Aspect Ratio
Overscan
2. Press the
,
,
button to select Auto sleep item.
Flip horizontal
Flip vertical
Sleep time
3. Press the
button to select the desired preset time.
Off
Off
Auto sleep
G
You can use this function through the
button on the control panel.
Presentation timer
G
Press the MENU button twice or the RETURN button to exit the menu screen.
MENU Prev.
Move
Select
Off
10 Min
20 Min
30 Min
60 Min
90 Min
240 Min
180 Min
120 Min
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Presentation timer Function
1. Press the MENU button and then use
,
button to select the
menu.
English
4 : 3
Off
Language
2. Press the
button.
,
button to select Presentation timer item and press OK
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
3. Press the
,
button to select Time alarm or Time keeper item.
Off
Off
Off
Time alarm
F
F
G
G
Auto sleep
Time Keeper
Off
To set
Presentation timer
MENU Exit
Move
Select
MENU Prev.
Move
OK
4. Press the
,
button to select the desired preset time.
5. The timer for Time keeper item starts to operate if you select specific time and press the OK button, and
the timer for Time alarm item starts to operate if you select specific time.
G
Time alarm function : If you select a specific time, it is displayed in minute units. After 1 minute, the remaining
time is displayed at the bottom right of the screen, and then disappears after 5 seconds.
When the remaining time is displayed, other OSD windows are closed. When the set
time is reached, ‘0 minute’ flickers 10 times at 1 second intervals, and then disappears.
G
Time keeper function : If you select a specific time, it continues to be displayed in minute(‘) and second(“)
units. Even though other OSD windows appear, the remaining time is displayed again
after the windows are closed. When the set time is reached. 0’ 00” flickers 10 times at
1 second intervals, and then disappears.
G
The Time alarm function and the Time keeper function cannot be used at the same time.
The Time alarm function can be set from 5 to 60 minutes at 5 minute intervals (Off, 5, 10, 15, 20, ..............,
G
55, 60 minutes).
G
The Time keeper function can be set from 1 to 10 minutes at 1 minute intervals, and from 10 to 60 minutes
al 5 minute intervals (Off, 1, 2, 3, 4, .............., 8, 9, 10, 15, 20, 25, .............., 55, 60 minutes).
G
You can use this function through the
button on the control panel.
G
Press the MENU button twice or the RETURN button to exit the menu screen.
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can’t get the best angle of projection.
1. Press the KEYSTONE +, - button of remote control.
2. Press the KEYSTONE +, - button to adjust the screen condition as you want.
G
Keystone can be adjusted from -20 to 20.
Keystone
0
G
You can use the Keystone function on the
menu screen by pressing the
buttons on the control panel.
button on the control panel.
MENU button, or by pressing the
,
G
G
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Using Blank Function
*This function may be effective if you need to get the attention of the audience during presentations, meetings or briefings.
1. Press the BLANK button on the remote control.
G
The screen turns off to a background image.
G
You can choose the background image.
(Refer to ‘Selecting blank image’)
2. Press any button to cancel the blank function.
G
To temporarily turn off the image, press BLANK on the remote control. Do not block the projection lens with any objects
when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire.
Selecting Blank image
1. Press the MENU button and then use
,
button to select the
menu.
Keystone
0
2. Press the
,
button to select Blank image item.
Blank Image
LED mode
Captured Image
Normal
3. Press the
,
button to select the color you want to use.
DivX Reg. Code
G
Background image will be altered to the selected Blank image function.
MENU Prev.
Move
Select
G
G
You can choose blue, black, green, or captured image for the Blank image.
If you have a captured image, you can use it as a blank image instead of logo
image. And you only have one last captured image.
G
When you select the Captured image, displays a logo, if you don’t have a cap-
tured image.
You can use this function through the
Press the MENU button twice or the RETURN button to exit the menu screen.
G
G
button on the control panel.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
LED mode Function
1. Press the MENU button and then use
,
button to select the
menu.
Keystone
0
2. Press the
3. Press the
,
button to select LED mode item.
Blank Image
LED mode
Black
Normal
,
button to select Normal or Dark.
DivX Reg. Code
MENU Prev.
Move
Select
G
You can use this function through the
button on the control panel.
G
G
Press the MENU button twice or the RETURN button to exit the menu screen.
Refer to the page 38 for DivX Reg. Code.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Screen Menu Options
Auto configure Function
* This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization
of the image.
* Auto Tracking function works in RGB PC input only.
1. Press the AUTO button of the remote controller.
G
Image positioning and synchronization are automatically adjusted.
2. If any more manual adjustment is needed according to the various PC
mode inputs even after the auto-correction, execute Phase, Clock,
Auto configure
Horizontal and Vertical function in
menu. In certain circumstances,
you can’t get the best picture quality by only using auto-correction.
You can also use this function by using the MENU button. (Only in RGB mode)
For best results, perform this function while displaying a still image.
Using Phase Function
1. Press the MENU button and then use
,
button to select the
menu.
Auto Configure
Phase
8
0
0
0
2. Press the
,
button to select Phase item.
button to make desired adjustments.
Clock
Horizontal
Vertical
3. Press the
,
MENU Store
Move
Adjust
G
Phase adjustment range is 0 ~ 31.
G
G
G
The variable range can be different depends on input resolutions.
You can use this function through the
button on the control panel.
Press the MENU button twice or the RETURN button to exit the menu
screen.
Using Clock Function
1. Press the MENU button and then use
,
button to select the
menu.
Auto Configure
Phase
8
0
0
0
2. Press the
,
button to select Clock item.
button to make desired adjustments.
Clock
Horizontal
Vertical
3. Press the
,
G
Clock adjustment range is -20 ~ 20.
MENU Store
Move
Adjust
G
G
G
The variable range can be different depends on input resolutions.
You can use this function through the
button on the control panel.
Press the MENU button twice or the RETURN button to exit the menu
screen.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Using Horizontal Function
1. Press the MENU button and then use
,
button to select the
menu.
Auto Configure
Phase
8
0
0
0
2. Press the
,
,
button to select Horizontal item.
Clock
Horizontal
Vertical
3. Press the
button to make desired adjustments.
G
Horizontal adjustment range is -50 ~ 50.
MENU Store
Move
Adjust
G
G
G
The variable range can be different depends on input resolutions.
You can use this function through the
button on the control panel.
Press the MENU button twice or the RETURN button to exit the menu
screen.
Using Vertical Function
1. Press the MENU button and then use
,
button to select the
menu.
Auto Configure
Phase
8
0
0
0
2. Press the
,
,
button to select Vertical item.
Clock
Horizontal
Vertical
3. Press the
button to make desired adjustments.
MENU Store
Move
Adjust
G
Vertical adjustment range is -50 ~ 50.
G
G
G
The variable range can be different depends on input resolutions.
You can use this function through the
button on the control panel.
Press the MENU button twice or the RETURN button to exit the menu
screen.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
USB
* Image shown may differ from your projector.
To use the USB device
Connecting the USB device
* When you connect a USB device, this screen is displayed, automatically.
In USB device, you can not add a new folder or delete the existing folder.
1. Connect the USB device to the USB jack on the back of the set.
2. It turns automatically to DivX Home Menu.
USB memory stick
PHOTO
MUSIC
MOVIE
Precautions when using the USB device
G Only a USB storage device is recognizable. Digital camera and mobile phone are not supported.
G If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G In case of a card reader, up to one memory cards are concurrently recognizable.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the PROJECTOR or unplug the USB device when the connected USB storage device is working. When
such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to
malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files.
G Please use only a USB storage device which was formatted as a FAT32 file system provided with the Windows operating system.
In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or
an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G If the name of a folder or file is too long, it will not be displayed or recognized.
G File alignment method is based on storage order in USB storage device.
G Please backup the important file because a data of USB device may be damaged. Data management is consumer's responsibility
and in consequence the manufactures does not cover the product bearing data damage.
G If the quantity of folders and files is over 1,000, it will not be displayed or recognized about exceeded files and folders.
G It is supported for only primary partition. If there is an extended partition, it is not displayed or recognized.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Photo List
* It is available to playback the photo file(*.jpg) in the USB device.
The On Screen Display may be different from your set. Images are an example to assist with the projector operation.
Screen Components
1. Slide show the selected item.
Photo List
2. Set the time interval of the slide show.
List
Preview
Up folder
3. Listen to music while viewing photos in
full size.
4. Moves to upper level file.
5. Corresponding buttons on the remote
control
RETURN
OK
P
Move Page
Exit
Move
Set up the menu in Full-Sized screen
* You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available
on full-sized photo view screen.
1. Use
,
button to select the desired photos.
2. Press the OK button.
3. The selected photo is displayed in full size and show up the menu.
90°
90°
(Rotate) : Rotate photos.
Prev
: Display the previous photo viewing.
: Display the next photo viewing.
: Stop the viewing the photos.
Next
Stop
Hide
: Hide the menu on the full-sized screen.
1/17
Prev
G
To see the menu again on the full-sized screen, press
ENTER button.
Next
Stop
Hide
90°
90°
G
The aspect ratio of a photo may change the
size of the photo displayed on the screen in
full size.
4. Press USB button to return to the DivX Home menu.
G
On operating the JPEG viewing, press the USB button after pressing the
STOP button to return to the DivX Home menu.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Viewing the Slide show
1. Use the
or
button to select the desired photos.
Photo List
Preview
List
Up folder
2. Press the
button to select
.
3. Press the OK button.
Stop
: Stop the viewing the slide show.
Hide
: Hide the menu on the full-sized screen.
P
RETURN
Move
OK
Move Page
Exit
G
To see the menu again on the full-sized screen, press
OK button.
4. Press the
button to select
.
5. Use
show.
or
button to control the time interval of the slide
Showing
1/17
6. Press the OK button to store it.
Stop
Hide
7. Press the
button to select
.
Photo List
8. Press the
OK button to listen to music while viewing
Preview
List
photos in full size.
Up folder
Set the music device and album in Option.
G
You should memorize FAV list to operate this function in
Music List.
9. Press USB button to return to the DivX Home menu.
G
On operating the Slideshow/BMG function, press the USB
button after pressing the RETURN button to return to the
DivX Home menu.
RETURN
Move Page
Exit
Move
P
OK
Photo List
Preview
List
Up folder
RETURN
Move Page
Exit
Move
P
OK
G
If it is Progressive JPEG format, some photos may be not decoded.
G
If the width of resolution is over 4800, it is not supported.
G
When loading, some buttons may not work.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Music List
* Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your set. Images are an example to assist with the projector operation.
Screen Components
1. Moves to upper level file
Music List
List
Programme
2. Delete All : Delete all selected
music.
Up folder
G
It is impossible to delete only one music
in music list.
3. Corresponding buttons on the
remote control
Delete All
RETURN
FAV
Enter
Exit
Edit
P
Move Page
1. a. If you want to listen to music, use the
select music.
or
button to
Music List
Programme
List
b. Press the OK button to play the music.
Up folder
c. All music in selected folder is played, repeatedly.
2. a. If you want to listen to several music in sequence, use
the
or
button to select music.
b. Press FAV button and then use OK button to make
Delete All
music list.
FAV
RETURN
Enter
Edit
Move Page
G
Exit
P
When FAV button is pressed,
possible to edit music list.
is displayed and then it is
c. To make music list, repeat steps a to b.
d. Press button and then use OK button to play
music in music list.
e. Up to 30 files are stored.
3. Press USB button to return to the DivX Home menu.
G
On operating the MP3 playing, press the USB button after pressing
the RETURN button to return to the DivX Home menu.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
G
G
If you don't press any button for a while during the playing, the
play information box (as shown in the below) will float as a
screen saver.
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period
of time.
G
,
A
If you press
OK ,
RETURN buttons, screen saver is stopped.
G
When music is playing,
is displayed in Back of the music title.
G
A music downloaded from a paid service with copyright protection does not start but displays inappropriate informa-
tion in playtime.
G
G
The FF GG buttons on the remote control are not available in this mode.
,
Customer should note that permission is required in order to download MP3 files form the internet, our company
has no right to guarantee such permission, permission should always be sought from the copyright owner.
G
When loading, some buttons may not work.
Supported music file: .MP3
*
Sampling Frequency : 32 ~ 48kHz
Bit rate : 32 ~ 320kbps
36
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Movie List
* The movie list is activated once USB is detected. It is used when playing movie files on PROJECTOR.
Displays the movies in the USB folder and supports play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and DivX file.
Screen Components
1. Moves to upper level file
Movie List
List
2. Corresponding buttons on the
Up foder
remote control
Move Page
Enter
RETURN
Exit
Move
P
1. Use the
or
button to select the desired movie titles.
2. Press the OK button to play the movie and show up the menu.
Control
To set
Language
Hide
Position
Sync
Aspect Ratio
On
Control : Turns the subtitle display on and off during movie play.
Language : Changes the Language Group of the subtitle during movie play.
Position : Changes the position of the subtitle either up or down during movie play.
Sync : Adjusts the time synchronisation of the subtitle from -5 secs ~ +5 secs by
steps of 1 secs during movie play.
Aspect Ratio : Adjusts the picture formats ; 4:3 or 16:9
G
To see the menu again on the full-sized screen, press OK button.
3. Press USB button to return to the DivX Home menu.
G
On operating the movie playing, press the USB button after pressing the RETURN button to return to the DivX
Home menu.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
DivX Audio Language & Subtitle Language
G
When DivX is playing, if you press the
OK button and then select language, this message is displayed.
Subtitle Language Group
Latin1
Press the
option.
button to select the desired
Subtitle Language
Audio Language
0
1
0
1
AC3
Supports up to Mpeg, Mp3, PCM, Dolby D file.
DivX registration code
Confirm the DivX registration code number of the projector. Using the registration number, movies can be rented or purchased
With a DivX registration code from other projector, playback of rented or purchased DivX file is not allowed. (Only DivX files
matched with the registration code of the purchased projector are playable.)
1. Press the MENU button and then use
,
button to select the
button to select DivX Reg. Code item.
OKbutton.
menu.
Keystone
0
2. Press the
3. Press the
,
Black
Blank Image
LED mode
Normal
DivX Reg. Code
Press OK
G
MENU Prev.
Move
OK
Press the MENU button twice or the RETURN button to exit the menu screen.
DivX Registration Code
xxxxxxxx
®
G
Official DivX Certified Product
®
®
)
®
G
“Plays all versions of DivX video (including DivX 6 with standard playback of DivX media
files”
®
G
DivX Certified Products: “DivX, DivX Certified, and associated logos are trademarks of DivX,
Inc. and are used under license.”
Supported movie file
Resolution : under 720x480(720x576) WxH pixels.
Frame rate : under 30 frames/sec
G
G
G
Video Codec : MP 43, DIVX_3_11, DIVX_4_12, DIVX_5_0, XVID, MP4S, RMP4, MP4V, _3IVX.
Files supported : *.avi, *.mpg, *.mpeg, *.divx
When loading, some buttons may not work.
Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol
are trademarks of Dolby Laboratories.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Supported Monitor Display
* The following table lists the display formats supported by the projector.
Sources
Format
Vertical Freq.(Hz)
Horizontal Freq.(kHz)
* If the projector does not support the input signal, “Out of Range” message appears on the screen.
* The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor)
* The Synchronization input form for horizontal and vertical frequencies are Separate.
* According to PC, the optimum vertical frequency may not be displayed up to the optimum frequency of set in ‘Registration information (Display
registration information)’. (ex, The optimum vertical frequency may be displayed up to 85Hz or under in the resolution of 640X480 or 800X600.)
<DVD/DTV Input>
Signal
Component-*1 RGB(DTV)-*2
O
O
O
O
O
O
O
O
X
O
O
O
X
480i
480p
720p
1080i
576i
NTSC(60Hz)
576p
720p
1080i
O
O
O
PAL(50Hz)
* Cable type
1- RGB to Component Cable
2- Computer Cable
* Recommended 720p for a better image.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Maintenance
* The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be
replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first.
Cleaning the lens
If there is any dust or stain on the surface of the lens, you must always clean the lens. Use an air sapray or cleaning cloth for product exterior, provid-
ed with the product, to lightly clean the product. When you want to remove dust or stain on the lens, use the air spray or cloth for product exterior, pro-
vided with the product, with neutral detergent and water.
Cleaning the Projector Case
To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with polish cloth provided. When you want to remove
the dust or stain on the lens, use the cloth for product exterior, provided with the product.
Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Specifications
HS102 (HS102-JE) / HS102G (HS102G-JE)
MODEL
800(Horizontal) x 600(Vertical)pixel
4:3(horizontal:vertical)
0.55 inches
Resolution
Horizontal / Vertical Ratio
DLP panel size
Screen size
(Projection distance)
0.40 ~ 2.23m(15 ~ 80 inches)
Projection OFF SET
Remote control distance
Video compatibility
Power
100%
6m
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
19V
, 6.3A
AC-DC Adapter
LG, PA-1121-04
50/2.0
Height(mm/inches)
Breadth(mm/inches)
Length(mm/inches)
Weight(g/pound)
154/6.1
117/4.6
780/1.72
Operating Condition
Temperature
In operation : 32~95°F(0°C~35°C)
In storage and transit : -4~140°F(-20°C~60°C)
Humidity
In operation : 0~ 75% relative humidity by dry hygrometer
Not in operation : 0 ~ 85% relative humidity by dry hygrometer
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|