LG Electronics DVD Recorder DRT389H User Manual

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 1

ENGLISH

DRT389H

FOR THE GUARANTEE TERMS & CONDITIONS,

PLEASE REFER TO BACK COVER OF THIS MANUAL.

P/NO : MFL56778733

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 3

Copyrights

POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.

ꢀRecording equipment should be used only for lawful copying and you are

advised to check carefully what is lawful copying in the area in which you are

making a copy. Copying of copyright material such as films or music is unlaw-

ful unless permitted by a legal exception or consented to by the rights owner.

WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug,

fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI

or ASTA approved type. Never use this plug with the fuse cover omitted. To

obtain a replacement fuse cover contact your dealer. If the type of plug

supplied is not suitable for the mains sockets in your home, then the plug

should be removed and a suitable type fitted. Please refer to the wiring

instructions below:

ꢀThis product incorporates copyright protection technology that is protected by

method claims of certain U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights owners. Use of this copy-

right protection technology must be authorized by Macrovision Corporation,

and is intended for home and other limited viewing uses only, unless other-

wise authorized by Macrovision corporation. Reverse engineering or disas-

sembly is prohibited.

WARNING: A mains plug removed from the mains lead of this unit must be

destroyed. A mains plug with bared wires is hazardous if inserted in a mains

socket. Do not connect either wire to the earth pin, marked with the letter E

ꢀCONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-

SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF

625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED

THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFI-

NITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 625p HDD/DVD RECORDER,

PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.

or with the earth symbol

or coloured green or green and yellow.

If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distri-

bution board.

IMPORTANT: The wires in this mains lead are coloured in accordance with

the following codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains

lead of this unit may not correspond with the coloured marking identifying the

terminals in your plug, proceed as follows: The wire which is coloured blue

must be connected to the terminal which is marked with the letter N or

coloured black. The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red.

Open source software notice

This product includes

ꢀ

Zlib compression library developed by Jean-loup Gailly and Mark Adler.

ꢀ

Doubly Linked List licensed by Artistic license.

You can download this software from http://freshmeat.net/projects/linklist/

Manufactured under license from Dolby Laboratories. Dolby and the double-

D symbol are trademarks of Dolby Laboratories.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 4

Contents

Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-14

Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . .14

Auto setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16

Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17

Adjust the SETUP settings . . . . . . . . . . . . . . . . . . . . . . .17-22

Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . .23-24

Using the digital EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-26

Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27

Playing DivX movie files . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Listening to a music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-32

Editing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-35

Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37-38

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Before connecting, operating or adjusting this product,

please read this instruction booklet carefully and completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 5

Before you start

Recordable and Playable discs

This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.

DVD-R

-R

DVD-RW

-RW

DVD-RAM

RAM

DVD+R

DVD+R(DL)

DVD+RW

+RW

Symbol used in

this manual

Video

-RW

Logos

Yes

Re-Writable

Formatting Mode

(new discs)

Video mode

Yes

VR mode

Auto

Limited

Yes

Limited

Yes

Editing

Play on other

players

The player must compatible with corresponding media and the media has to be finalized.

Recommended

discs

Mitsubishi(8x,16x)

Verbatim(8x,16x)

Mitsubishi(4x)

Verbatim(4x)

JVC(4x)

Mitsubishi(3x)

Maxell(5x)

Mitsubishi(8, 16x) Mitsubishi(2.4x, 8x)

Verbatim(8x,16x)

Mitsubishi(4x)

HP(4x)

Verbatim(4x)

Ricoh(4x)

Maxell(4x)

Playable discs

The table below shows the file formats and media types that this unit can playback.

DVD

Audio CD

ACD

Data disc (DivX, JPEG, MP3 or WMA)

DivX JPEG MP3 WMA

Symbol used in

this manual

Logos

Discs that contain DivX, JPEG, MP3 or WMA

files.

Discs such as movies Music CDs or CD-R/RWs

that can be

in music CD format that

purchased or rented. can be purchased

Characteristics

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 6

Notes on discs

About the

Symbol Display

ꢀ

Depending on the conditions of the recording equipment or the CD-R/RW (or

DVD R/RW) disc itself, some CD-R/RW (or DVD R/RW) discs cannot be

played on the unit.

“

” may appear on your TV display during operation and indicate that the

function explained in this owner’s manual is not available on that specific media.

Regional Codes

ꢀ

Do not attach any seal or label to either side (the labeled side or the record-

ed side) of a disc.

This unit has a regional code printed on the rear of the unit. This unit can play

only DVD discs labeled same as the rear of the unit or “ALL”.

Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing

so may result in malfunctions.

ꢀ

Most DVD discs have a globe with one or more numbers in it clearly visible

on the cover. This number must match your unit’s regional code or the disc

cannot play.

Depending on the recording software & the finalization, some recorded discs

(CD-R/RW or DVD R/RW) may not be playable.

ꢀ

If you try to play a DVD with a different regional code from the unit, the mes-

sage “Incorrect region code. Can’t play back” appears on the TV screen.

DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal

computer or a DVD or CD Recorder may not play if the disc is damaged or

dirty, or if there is dirt or condensation on the Unit’s lens.

Remote Control Operation

ꢀ

If you record a disc using a personal computer, even if it is recorded in a

compatible format, there are cases in which it may not play because of the

settings of the application software used to create the disc. (Check with the

software publisher for more detailed information.)

Point the Remote Control at the remote sensor and press the buttons.

Remote Control Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert R03

(size AAA) battery with 3 and # matched correctly.

This unit requires discs and recordings to meet certain technical standards

in order to achieve optimal playback quality. Pre-recorded DVDs are auto-

matically set to these standards. There are many different types of record-

able disc formats (including CD-R containing MP3 or WMA files) and these

require certain pre-existing conditions (see above) to ensure compatible

playback.

Setting up the remote to control your TV

You can operate your TV with the supplied remote control.

If your TV is listed in the table below, set the appropriate manufacturer code.

While holding down TV POWER button, and press the manufacturer code for

your TV with the numerical buttons (see the table below). Release the TV

POWER button to complete setting.

ꢀ

Customers should note that permission is required in order to download

MP3 / WMA files and music from the Internet. Our company has no right to

grant such permission. Permission should always be sought from the copy-

right owner.

Manufacturer

LG / GoldStar

Zenith

Code Number

1 (Default), 2

Restrictions on copying

1, 3, 4

6, 7

8, 9

Some video materials are copy-once protected: Such material cannot be copied

to DVD. You can identify copy-once protected material during playback by dis-

playing disc information on-screen.

Samsung

Sony

ꢀ

NTSC format signals from the analog or the DV inputs are not recorded cor-

rectly with this unit.

Hitachi

Depending on your TV, some or all buttons may not function on the TV, even

after entering the correct manufacturer code. When you replace the batteries of

the remote, the code number you have set may be reset to the default setting.

Set the appropriate code number again.

ꢀ

Video signals in SECAM format (from the built-in TV tuner or from the ana-

log inputs) are recorded in PAL format.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 7

Remote control

AUDIO ( ): Selects an audio language or audio channel.

FAV: Displays the favorite program list.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

POWER: Switches the unit ON or OFF.

SUBTITLE: Selects a subtitle language.

AV: Changes the input source (Tuner, AV1-3, or DV IN).

TEXT: Switches between digital text mode and normal TV

viewing.

TV/DVD: Press to switch between ‘TV mode’, in which you

can operate the picture and sound from the TV, and ‘DVD

mode’, in which you can operate the picture and sound from

the DVD recorder.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Coloured buttons: Used when an EPG screen is displayed

or when digital text service is in use. The function of each

coloured button will be described on-screen.

OPEN/CLOSE: Opens and closes the disc tray.

0-9 numerical buttons: Selects numbered options in a

menu.

REPEAT: Repeat sequence, chapter, track, title, all.

TITLE: Displays the disc’s Title menu, if available.

MARKER: Selects multiple files/titles on the list.

CLEAR: Removes a track number on the Program List.

GUIDE: Displays the EPG menu.

REC(z): Starts recording. Press repeatedly to set the

recording time.

TV Control Buttons: You can control the sound level, input

source, and power switch of your TV.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

SCAN (m / M): Search backwards or forwards.

SKIP (. / >): Go to next or previous chapter/track/file.

PAUSE/STEP (X): Pause playback or recording temporarily.

PLAY (N): Starts playback.

PR (+/-): Scans up or down through memorized

channels.

PR LIST: Displays the program list menu.

STOP (x): Stops playback or recording.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

HOME: Activates the HOME menu.

MENU/LIST: Displays the menu on a DVD disc or switches

between Titlelist-Original and title List-Playlist menu.

b / B / v / V (left/right/up/down):

Used to navigate on-screen displays.

OK ( ) : Acknowledges menu selection.

BACK (O): Removes the on-screen displays.

INFO (i): Accesses on-screen Display.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 8

Main Unit

c d

f g h i

j k l

a 1 / I (POWER button)

f N / X (PLAY / PAUSE)

Switches the unit ON or OFF.

Starts playback.

Pause playback or recording temporarily,

press again to exit pause mode.

b Disc Tray

Insert a disc here.

g x (STOP)

Stops playback or recording.

c OPEN/CLOSE (Z)

Opens or closes the disc tray.

h z (REC)

d Remote Sensor

Starts recording. Press repeatedly to set the recording time.

Point the remote control here.

i RES. (Resolution)

e Display window

Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.

Shows the current status of the unit.

- HDMI: 576i, 576p, 720p, 1080i, 1080p

REC: The unit is recording.

COMPONENT: 576i, 576p

j USB Port

Connect a USB Flash Memory.

k DV IN

Connect the DV output of a digital camcorder to the DVD recorder.

: Indicates when the unit is in timer recording or a timer recording is pro-

grammed.

: Indicates clock, total playing time, elapsed time, title number,

chapter/track number, channel, etc.

l AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source (Audio system, TV/

Monitor, VCR, Camcorder, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 9

Hooking up the unit

aAntenna connection

Connect the Terrestrial

TV antenna to the

Antenna

(Analog)

Antenna

(Digital)

dPower cord connection

Connect the mains lead to

the AC IN terminal on the

DVD recorder. Then plug the

power cord into the mains.

ANTENNA IN jack on

the unit.

If you want to use an

indoor antenna, use one

with a signal amplifier

rated at 5V, 100mA and

set [Antenna Feed 5V]

to [ON] in the setup

menu. (See page 18 for

details)

and/or

bAntenna connection to

cSCART connection

Connect one end of the scart

cable into the AV1 SCART

jack on the DVD recorder

and the other end to the

corresponding in jack on

your TV.

your TV

Connect one end of the RF

cable to ANTENNA OUT jack

on the unit and other end to

ANTENNA IN jack on your

TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 10

Component connection

Hooking up the unit - more you can do

General about connection

Connect one end of the component(Y PB PR) cable to the COMPONENT OUT-

PUT jack on the DVD recorder and other end to the COMPONENT INPUT jack

on your TV.

Picture and sound

Connect one end of the audio cables (red and white) to the analog AUDIO

OUTPUT jack on the DVD recorder and other end to the AUDIO INPUT jack on

your TV.

Digital TV is a transmission technology that replaces the traditional analogue

technique.

This means that several TV channels, radio channels and other digital services

can be transmitted on the same space as just one analogue channel.

As a consumer you get access to many more channels and services with

perfect picture and audio quality.

Connecting your recorder is just as simple as connecting an old VCR recorder.

And by using a HDMI cable for connection you get the best picture quality to

your TV-set. The best audio experience can be obtained by connecting an

optical cable to your sound system.

Coverage

Before buying this product it is anticipated that you have made sure that there

are digital transmissions covering your region.

Antenna / Signal source

You may decide to connect your DVD recorder to an indoor arial or an external

arial. Either of the two can give you variances on the signal strength. If you live

in a flat you should make sure that the digital terrestrial signals are distributed to

your wall antenna outlet. If you have your own antenna system you must make

sure that it is equipped with antennas, filter and/or amplifier that can handle

those frequencies that the digital channels are transmitted on.

If your television is a high-definition or “digital ready” television, you may take

advantage of the unit’s progressive scan output for the highest video resolution

possible. If your TV does not accept the Progressive Scan format, the picture

will appear scrambled with the progressive signal.

Set the resolution to 576p using the RES. button on the front panel of the DVD

recorder to obtain the 576p progressive signal.

Cable-TV

Please observe that this recorder is not designed for the reception of regular

digital cable-TV signals (QAM-signal). Despite this, operators of smaller cable

networks may have chosen to distribute the digital terrestrial signals (COFDM-

signal) in the network. In this case this recorder may be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 11

S-Video connection

Connect one end of the S-Video cable to the S-VIDEO OUTPUT jack on the

DVD recorder and the other end to the S-Video INPUT jack on your TV.

Connect one end of the audio cable (red and white) to the analog AUDIO OUT-

PUT jack on the DVD recorder and the other ends to the AUDIO INPUT jack on

your TV.

Digital audio connection

Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other

equipment with a digital input.

Connect one end of the digital audio cable (COAXIAL or OPTICAL) to the digital

audio output jack (COAXIAL or OPTICAL) on the DVD recorder and the other

end to the digital audio input jack (COAXIAL or OPTICAL) on your amplifier.

This recorder does not perform internal (2 channel) decoding for a DTS sound

track . To enjoy DTS multi channel surround, you must connect this recorder to

a DTS compatible receiver via one of this recorder’s digital audio output.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 12

ꢀ If your TV is not equipped with a DTS decoder, set the [DTS] options to

[OFF] on the setup menu (See page 19). To enjoy DTS multi channel

surround, you must connect this unit to a DTS compatible receiver via

one of this unit’s digital audio outputs.

HDMI connection

Connect one end of the HDMI cable to the HDMI OUTPUT jack on the DVD

recorder and other end to the HDMI INPUT jack on your TV.

ꢀ If there is noise or lines on the screen, please check the HDMI cable.

ꢀ Changing the resolution when the unit is connected with HDMI connector

may result in malfunctions. To solve the problem, turn off the unit and

then turn it on again.

ꢀ When you connect a HDMI or DVI compatible device make sure of the

following:

Try switching off the HDMI/DVI device and the DVD recorder. Next,

switch on the HDMI/DVI device and leave it for around 30 seconds,

then switch on the DVD recorder.

Recorder

When you use the HDMI connection, you can change the resolution (576i,

576p, 720p,1080i or 1080p) for the HDMI output by pressing RES. button on

the front of the DVD recorder repeatedly.

The connected device’s video input is set correctly for this unit.

The connected device is compatible with 720(1440)x576i, 720x576p,

1280x720p, 1920x1080i or 1920x1080p video input.

About HDMI

ꢀ Not all HDCP-compatible DVI devices will work with this unit.

The picture will not be displayed properly with non-HDCP device.

HDMI (High Definition Multimedia Interface) supports both video and audio on a

single digital connection for use with DVD Players, Set-Top Boxes, and other AV

devices.

HDMI was developed to provide the technologies of HDCP (High-bandwidth

Digital Contents Protection). HDCP is used to protect digital content transmitted

and received.

What is SIMPLINK?

HDMI has the capability to support standard, enhanced, or high-definition video

plus standard to multi-channel surround-sound audio, HDMI features include

uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one

connector (instead of several cables and connectors), and communication

between the AV source and AV devices such as DTVs.

Some functions of this DVD recorder can be controlled by the TV’s remote

control when connected to a LG TV with SIMPLINK through the HDMI

connection.

•

Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip,

Stop, Power Off, etc.

•

Refer to the TV owner’s manual for the details of SIMPLINK function.

LG TV with SIMPLINK function feature the logo as shown above.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks

or registered trademarks of HDMI licensing LLC.

Note on HDMI connection

ꢀ If your TV is NOT capable of handling 96 kHz sampling frequency, set

the [Sampling Freq.] option to [48 kHz] on the setup menu (See page

19). When this choice is made, this unit will automatically convert any 96

kHz signals to 48 kHz so your system can decode them.

ꢀ If your TV is not equipped with Dolby Digital and MPEG decoder, set the

[Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See

page 19).

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 13

ꢀ Pictures containing copy protection signals that prohibit any copying cannot

be recorded.

Connecting a PAY-TV/Canal Plus Decoder

You can watch or record PAY-TV/Canal Plus programmes if you connect a

decoder (not supplied) to the unit. Disconnect the unit’s mains lead from the

mains when connecting the decoder. You do not need to turn on the unit to view

the signals from the connected tuner on your TV.

ꢀ If you pass the unit signals via the VCR, you may not receive a clear image

on your TV screen.

Be sure to connect your VCR to the unit and your TV in the order shown

below. To watch video tapes, watch the tapes through a second line input on

your TV.

To watch or record PAY-TV/Canal

Plus programmes, set [AV2

Connection] option to [Decoder] (see

SCART AV

page 18) and set the program’s

[CANAL] option to [On] on the Setup

menu (page 15).

If you disconnect the unit’s mains

lead, you will not be able to view the

signals from the connected decoder.

ꢀ When you record to a VCR from this unit, do not switch the input source to

TV by pressing the TV/DVD button on the remote.

ꢀ If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART

jack to the AV2 DECODER jack.

ꢀ If you disconnect the unit’s mains lead, you will not be able to view the sig-

nals from the connected VCR or tuner.

Connecting to the AV2 DECODER jack

Connect a VCR or similar recording device to the AV2 DECODER jack of this

unit. You do not need to turn on the unit to view the signals from the connected

tuner on your TV.

To watch or record the source from

AV2 DECODER jack, set [AV2

Connection] option to [Others] (see

page 18) and set [AV2 Recording]

option to [Auto], [CVBS], [RGB] or

[S-Video] as required (see page 21).

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 14

Connecting to the AV IN 3 Jacks

Operating USB Flash Drive

Connect the input jacks (AV IN 3) on the DVD recorder to the audio/video out

jacks on your accessory component using audio/video cables.

ON REMOTE

1. Insert an USB Flash Drive to the USB port:

2 Displays the HOME menu:

–

HOME

3 Select a main option:

b B

[MUSIC], [PHOTO] or [MOVIE] option

4 Select the [USB] option:

v V

5 Displays corresponding menu list:

For details of operations on each files, refer to

relevant pages.

OK (

)

Using USB Flash Drive - more you can do

Using a USB Flash Drive

Connecting a Digital Camcorder

Using the front panel DV IN jack, it is possible to connect a DV digital

camcorder and digitally transfer DV tapes to DVD.

This unit can play the MP3/WMA/JPEG/DivX files contained in the USB Flash

Drive.

Use a DV cable (not supplied) to connect the DV in/out jack of your DV cam-

corder to the front panel DV IN jack of this unit.

Inserting the USB Flash Drive – Insert straight-in until it fits into place.

Removing the USB Flash Drive – Withdraw the USB Flash Drive carefully

when not in use.

Notes on USB Flash Drive

ꢀ

The contents on a disc cannot be moved or copied to a USB Flash Drive.

ꢀ

Keep the USB Flash Drive out of reach of children. If swallowed, seek med-

ical advice immediately.

ꢀ

This unit supports only USB Flash Drive with FAT16 or FAT32 format.

The USB Flash Drives which require additional software will not be

supported.

ꢀ

This unit is compatible with the Flash type USB device that supports USB

1.1.

The DV IN jack is for connection to DV digital camcorder only. It is not compati-

ble with digital satellite tuners or D-VHS video decks. Disconnecting the DV

cable while recording the contents of the connected digital camcorder may

result in malfunction.

ꢀ

This unit may not supports all USB Flash Drive.

Do not extract the USB Flash Drive whilst in use (play, copy, etc.).

It may cause a malfunction on this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 15

Auto setup

During the first use of the DVD recorder, the initial

setup wizard sets the language, clock and channels

automatically.

ON REMOTE

Turn on the unit:

POWER

The initial setup wizard appears on the screen.

Choose a language:

v V

[Favorite]: Set the program to favorite channel.

[Delete] (Analog channel only): Delete the selected channel from pro-

grammed channel list.

[Move] (Analog channel only): Change the order of the channels and which

numerical button they correspond to.

[Station Rename] (Analog channel only): change the name of the selected

channel.

[Program Edit] (Analog channel only): Change the settings of a channel

manually.

Select the chosen language:

OK (

)

Check the antenna and go to the next step:

Choose a clock setting mode:

OK (

v V

Select the chosen clock setting mode:

OK (

)

Set the clock:

This step is not available for Auto mode

v V b B , OK (

)

Choose a broadcasting type:

B v V

All or Analog

Editing a channel (Analog channel only)

You can change the settings of programmed channel by selecting [Program

Edit] option on the left side of the channel editing screen.

Select the [Start] and starts channel scan:

B, OK (

OK (

)

10 Close the initial setup:

)

Auto setup - more you can do

Adjust the programmed channels

[PR]: Indicates the selected channel position.

[Seek]: Searches for a channel automatically. Searching stops when the unit

tunes in a channel.

Press HOME, then use b B to select [Easy Menu] option. Press OK( ) while

[SETUP] is selected. The SETUP menu appears on the screen. Select the

[Program Edit] on the second level options then press B to move to the third

level. Press OK( ) while [Edit] option is selected. The channel editing screen

appears on the screen.

[Ch.]: Changes the channel number.

[MFT]: Fine tunes the channel to obtain a clearer picture.

[CANAL]: Sets the channels for the decoder. You need this setting to watch

or record PAY-TV/Canal plus programs.

Select which channel you would like to edit and press OK( ). An option menu

on the left side of the screen will be highlighted.

[NICAM]: Sets the channels for the NICAM broadcast.

[OK]: Confirm the settings and return to the channel list menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 16

Switching the program list on the channel editing screen

Setting the AV1 Decoder

You can switch the program list on the channel editing screen.

Sets the AV1 scart jack for inputting encoded video signals. This option sets the

unit to output the encoded signal from AV1 scart jack to AV2 (DECODER) scart

jack for decoding. The decoded signal is then sent back through the AV2

(DECODER) jack so you can record or watch PAY-TV/Canal Plus programs.

Press AV once while the channel editing screen appears. Press OK( ) to turn

on the option and press OK( ) again to turn off. The [Canal+] appears on the

screen when this option is turned on.

Use v V to move the highlight position to the top of the program list.

Use b B to select [DIGITAL TV], [ANALOG TV] or [RADIO] then use v V to

select a program on the list.

Using the Home Menu

ON REMOTE

Setting a favorite program

1 Displays the HOME menu:

2 Select a main option:

3 Select a sub option:

HOME

b B

You can set a program as a favorite channel.

v V

4 Execute the selected option:

5 Exit the HOME menu:

OK (

)

HOME

Select a program on the program list then press OK( ) to highlight the option

menu on the left side of the screen. Select [Favorite] option then press OK( ).

The program is set to the favorite program and [FAV] appears on the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 17

Using the Home Menu - more you can do

MOVIE

Adjust the SETUP settings

ON REMOTE

DISC

1 Displays the HOME menu:

HOME

– Displays [Title List] menu, which shows recorded titles on the disc. (page

33)

2 Select the [Easy Menu] option:

b B

– Displays [Movie List] menu, which shows DivX^®movie files on the disc.

(page 28)

3 Select the [SETUP] option:

OK (

v V

)

– Plays DVD-Video disc (page 26).

4 Select a desired option on the first level:

5 Move to second level:

USB – Displays [Movie List] menu, which shows DivX^®movie files on the USB

Flash Drive. (page 28)

6 Select a desired option on the second level:

7 Move to third level:

v V

PHOTO

DISC – Displays [Photo List] menu, which shows photo files on the disc. (page

8 Adjust or confirm the setting:

9 Go back to the previous level:

v V, OK (

)

30)

USB – Displays [Photo List] menu, which shows photo files on the USB Flash

Drive. (page 30)

MUSIC

DISC – Displays [Music List] menu, which shows music files or audio tracks on

the disc. (page 29)

USB – Displays [Music List] menu, which shows music files on the USB Flash

Drive. (page 29)

Easy Menu

SETUP – Displays SETUP menu. (page 17)

Rec Mode – Displays [Record Mode Set] option in the SETUP Menu. (page 20)

Record

First level

Second level

Timer Record – Displays [Timer Record] menu. (page 31)

Third level

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 18

TV Aspect – Selects the aspects ratio of the connected TV.

Adjust the SETUP settings - more you can do

Adjust the general settings

[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV

and prefer the wide picture with bands on the upper and lower portions of the

screen.

[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and

prefer the wide picture on the entire screen cuts off the portions that do not

fit.

[16:9 Wide]: Select this when connecting to a wide-screen TV.

AV2 Connection – You can connect a decoder or the other device to the

AV2(DECODER) jack on the rear panel.

[Decoder]: Select this when you connect a PAY-TV decoder to the

AV2(DECODER) jack on the unit.

[Others]: Select this when you connect a VCR or similar recording device to

the AV2(DECODER) jack on the unit.

Auto Programming – This option automatically scans and sets the available

channels. Password is needed to access this option, if [Lock System] option is

set to [On]. (page 20)

Video output format – Select an option according to the TV connection type.

[Country]: Select a country where you operate this unit. If the country that you

want to set is not listed, select [Others].

[All, Digital or Analog]: Select a broadcasting type which you want to scan

automatically.

[YPbPr]: When your TV is connected to the COMPONENT OUTPUT jacks on

the unit.

[RGB]: When your TV is connected to the SCART jack on the unit.

[Start]: Start the channel scanning.

Power Save mode – Selects whether the DVD recorder is in power save mode

when the power is turned off. This option is not available when a timer recording

is set.

Program Edit– This option allows you to add channels and edit preset

channels. Password is needed to access this option, if [Lock System] option is

set to [On]. (page 20)

[ON]* : The front panel display is off and only signals arriving at the antenna

input are passed through when the DVD recorder is turned off.

[OFF]: Turns off the [Power Save Mode].

[Add Channel]: Select the broadcasting type between [Digital] and [Analog]

and then press v V to select the channel and press OK( ) to add the

selected channel.

[Edit]: Displays the screen which show preset channel list and channel

editing options. (page 15)

*1 If you turn off the unit while receiving encoded signals, the power save mode will

not work

Antenna Feed 5V – If you are using an indoor antenna, use one with a signal

Clock Set– The clock must be set in order to use [Timer record].

amplifier rated at DC 5V, 100mA and set this option to [ON].

[Auto]: Set the channel that broadcasts a clock signal and the clock will be

set automatically. If the clock that has automatically set is different with your

local clock, you can amending by using [Time Offset] option. (For example,

when British summer time is in use.) Press B to select [Time Offset] option.

Press v V to select a value then press OK( ) (0, 30, 60, 90, 120). Select “0”

if the clock that has automatically corrected itself with local time.

[Manual]: If there is no channel that broadcasts a clock signal in your area,

you can set the time and date manually.

[ON]: Power is supplied to the connected antenna.

[OFF]: The unit does not supply power to the connected antenna.

Initialization – You can reset the unit to its original factory settings.

[Factory Set]: You can reset the unit to all its factory settings. Some options

cannot be reset (Rating, Password, and Area Code). The auto setup menu

appears on the screen after the factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 19

Adjust the language settings

Adjust the audio settings

Display Menu – Select a language for the Setup menu and on-screen display.

Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when

using the DIGITAL AUDIO OUTPUT jack.

Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.

[Bitstream]: Select this when you connect this DVD recorder’s DIGITAL

AUDIO OUTPUT jack to an audio component with a built-in Dolby Digital,

DTS or MPEG decoder.

[PCM] (for Dolby Digital / MPEG): Select this when you connect this DVD

recorder’s DIGITAL AUDIO OUTPUT jack to an audio component without a

built-in Dolby Digital or MPEG decoder.

[Original]: Refers to the original language in which the disc was recorded.

[Others]: To select another language, press number buttons then OK( ) to

enter the corresponding 4-digit number according to the language code list

on page 36. If you make a mistake while entering number, press CLEAR to

delete numbers.

[OFF] (for Disc Subtitle): Turn off Subtitles.

[Off] (for DTS): Select this when you connect this DVD recorder’s DIGITAL

AUDIO OUTPUT jack to an audio component without a built-in DTS decoder.

DTV Audio – Digital channels sometimes provide multiple audio tracks, often in a

different language. You can set a default audio language with this setting.

If provided by the broadcaster, you can also select a different audio language

while viewing TV by pressing AUDIO repeatedly.

Sample Freq. (Frequency) – Selects the sampling frequency of the audio

signal.

[48 kHz]: The audio signals are always converted to 48 kHz.

[96 kHz]: The audio signals are output in their original format.

DTV Subtitle – Digital channels sometimes provide subtitles, often in a different

language. You can set a default subtitle language with this setting, if DTV subtitle

DRC (Dynamic Range Control) – Make the sound clear when the volume is

turned down (Dolby Digital only). Set to [On] for this effect.

is provided by the broadcaster

Press SUBTITLE repeatedly to select a subtitle language whilst viewing a digital

TV channel.

Vocal – Select [On] to mix karaoke channels into normal stereo. This function is

effective for multi-channel karaoke DVDs only.

DivX Subtitle – Select a language code for the DivX^®subtitle.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 20

Area code – Select a code for a geographic area as the playback rating level.

This determines which area’s standards are used to rate DVDs controlled by the

parental lock. See the Area Codes on page 36.

Adjust the lock settings

DivX Reg. Code– We provide you with the DivX® VOD (Video On Demand)

registration code that allows you to rent and purchase videos using the DivX®

VOD service. For more information, visit www.divx.com/vod.

Press OK( ) when [View] icon is highlighted and you can view the registration

code of the DVD recorder.

Adjust the recording settings

To access the Lock System, DVD Rating, DTV Rating, Set Password or Area

Code options, you must enter the 4-digit password. If you have not yet entered

a password you are prompted to do so. Enter a 4-digit password. Enter it again

to verify. If you make a mistake while entering number, press CLEAR to delete

numbers.

If you forget your password, you can reset it. Display the SETUP menu, input

‘210499’ and press OK( ). The password has now been cleared.

Lock System – Allows you to set up specific programs and ratings through

blocking schemes. Also allows you to activate or disable all of the lock schemes

previously set up. A password is required to gain access to the lock menu

options. When the [Lock System] is set to [OFF], the [DTV Rating] is not

effective.

Record Mode Set – Select the picture quality for recording in XP, SP, LP, EP or

MLP mode. See recording time of each mode on page 39.

[XP]: Highest picture quality.

[SP]: Standard picture quality.

[LP]: Slightly lower picture quality than [SP] mode.

[EP]: Low picture quality.

[MLP]: The longest recording time with the lowest picture quality.

DVD Rating – Select a DVD rating level. The lower the level, the stricter the

rating. Select [No Limit] to deactivate the rating.

DTV Rating – You can set the ratings to block out all the programs with ratings

above a specified level.

[No Control]: DTV Rating is not active and you can view all programs.

Record Aspect – This option sets the recording aspect ratio to suit the material

you are recording on DVD.

[04 Years] – [18 Years]: Rating [04 Years] has the most restrictions and [18

Years] is the least restrictive.

DV Record Audio – You need to set this if you have a camcorder using

32kHz/12-bit sound connected to the front panel DV IN jack.

[Lock All]: All programs are locked. To view a program, you must change the

rating level you have set.

Some digital camcorders have two stereo tracks for audio. One is recorded at

the time of shooting; the other is for overdubbing after shooting.

On the Audio 1 setting, the sound is recorded while shooting.

On the Audio 2 setting, the overdubbed sound is used.

Set Password – Changes or deletes the password.

[Change]: Enter the new password twice after entering the current password.

[Delete]: Delete the current password by entering it.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 21

TV Record Audio – Select an audio channel to record when recording a bilin-

gual program.

Finalize – Finalizing is necessary when you wish to playback a DVD which you

have made in order for it to work with another DVD player. How long finalization

takes depends on the disc condition, recorded length and number of titles.

[Main+Sub]: Main language and sub language

[Main]: Main language only

[Sub]: Sub language only

[Finalize]: The [Finalize] menu appears. The unit starts finalizing after

confirmation.

[Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming

on the [Unfinalize] menu. After unfinalizing, the disc can be edited and re-

record.

Auto Chapter – When recording, chapter markers are added automatically in

every specified interval (5, 10 or 15 min.).

AV2 Recording – Selects a method of inputting video signals for the

AV2(DECODER) jack. The picture will not be clear if this setting does not match

the type of the video input signal.

[Auto]: The video input signal will automatically follow the video signal

received.

Before finalizing, check the characteristics between the disc type in the table

below.

The finalized DVD-RW discs can be unfinalized

so that the disc can edit or record again.

-RW

[CVBS]: Inputs CVBS(composite) video signals.

[RGB]: Inputs RGB signals.

Once you finalize a disc, you can not edit or

record anything on the disc.

-R

[S-VIDEO]: Inputs S-Video signals.

Discs are automatically finalized when removed from

the unit.

+RW

RAM

Adjust the disc settings

The finalization is not required.

Disc Label – This function allows you to change the default disc name to some-

thing more descriptive. This name appears when you load a disc and display

disc information on-screen. The keyboard menu appears by pressing OK(

while [Edit] is selected.

)

Disc Protect – This function allows you to protect discs from accidental

recording, erasure and editing by setting this option to [ON]. The DVD-R and

Video mode DVD-RW are not available to protect.

Disc Format – You can Initialize a DVD by pressing OK( ) while [Start] is

selected. The [Disc Format] menu appears. The unit starts formatting after

confirmation. You can select a mode between VR and Video for DVD-RW discs.

Everything recorded on the DVD will be erased after formatting.

If you load a completely blank disc, the unit will initialize the disc automatically.

See “Formatting mode (new disc)” on page 5 for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 22

Adjust the network settings

Software Update – Your recorder is able to keep the built-in digital tuner up to

date with the latest software. You can either check for updates manually, or

have the unit do it automatically at regular intervals.

While the DVD recorder is updating, there may be a disruption in reception for a

few hours. The reception should return to normal after the update is complete.

This unit must be plugged into AC power to receive updates. Do not unplug

your recorder while an update is in progress. The update is not available during

recording, Timeshift, viewing teletext or EPG menu.

[Standby mode] Updates the software when this unit is turned off. The check

mark appears when this option is selected.

[Operation Mode] Update the software when this unit is turned on. The check

mark appears when this option is selected.

[Time] Set the time to update the software.

[Freq] Selects the updates interval.(Weekly or Daily)

[Start] Updates the software immediately.

System Information – Shows system information. (software version,

DTV Signal Quality and DTV Signal Strength)

DTV Diagnostics – To assist in locating any problems you may experience, the

unit includes DTV diagnostics options. This option gathers information about

DTV signals to troubleshoot DTV-related problems.

Highlight the [Start] option then press OK( ) to show diagnostic information.

To show details about multiplexer, use v /V to highlight a multiplexer then

press OK( ).

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 23

Moving to another title

DVD ALL

Displaying disc information

When a disc has more than one title, you can move to another title.

Press INFO (i) twice during playback then use v / V to select the title icon.

Then, press the appropriate numbered button (0-9) or b / B to select a title

number.

ON REMOTE

1 Play the disc loaded on the unit:

2 Displays current status of playback:

3 Displays the playback menu:

4 Select an item:

PLAY

INFO (i)

v V

Starting playback from selected time

DVD ALL DivX

Press INFO (i) twice during playback. The time search box shows the elapsed

playing time. Select the time search box and then input the required start time

in hours, minutes, and seconds from left to right. For example, to find a scene

at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press OK( ).

5 Adjust the playback menu settings:

6 Exit the disc playback menu:

b B

INFO (i)

If you enter the wrong numbers, press b

B to move the under bar (_) to the

wrong number, then enter the correct numbers.

Displaying disc Information - more you can do

Adjusting playback menu item

Selecting a subtitle language

DVD DivX

During playback, press INFO (i) twice to display the playback menu. Use v V to

You can select an item by pressing vV and change or select the setting by

select the subtitle option then use b B to select desired subtitle language.

pressing b B.

During playback, press SUBTITLE then press b B repeatedly to select a

desired subtitle language.

Watching from a different angle

DVD

If the disc contains scenes recorded at different camera angles, you can change

to a different camera angle during playback.

During playback, press INFO (i) twice to display the playback menu. Use v V to

select the angle option, then use b B to select desired angle.

Selecting a sound mode

DVD ALL DivX

This DVD recorder can produce a 3D Surround effect, which simulates multi-

channel audio playback from two conventional stereo speakers, instead of the

five or more speakers normally required to listen to multi-channel audio from a

home theatre system.

During playback, press INFO (i) twice to display the playback menu. Use v V to

select the sound option then use b B to select desired sound mode

(3D SUR. or NORMAL).

aCurrent title/track/file / Total number of titles/tracks/files

bCurrent chapter / total number of chapters

cElapsed playing time

dSelected audio language or audio channel

eSelected subtitle

fSelected angle / Total number of angles

gSelected sound mode

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 24

Displaying information while watching TV

Changing TV program

Whilst using the DVD recorder to watch TV, Press INFO (i) to display the infor-

mation displayed on-screen.

Use PR(+/-) on the remote control to change the program or use numbered

(0-9) buttons to select a program directly.

Changing TV program with program list

You can display the TV program list using the PR LIST button and switch to

other TV programs on the channel list.

While watching a program, press PR LIST to display the TV program list.

Select your desired channel using the v / V and press OK( ) to change the TV

program.

Switching the program list

You can switch the program list to DIGITAL TV, ANALOG TV or RADIO.

Press v to move the highlight position to top of the program list.

Press b B to select a [DIGITAL TV], [ANALOG TV], or [RADIO]. Selected pro-

gram list appears.

aIndicates channel number, station name, and audio signal

(Stereo, Bilingual, Mono) received by the tuner.

Displaying the favorite program list

(The audio signal indication is available only for the analog channels.)

bIndicates media name and format.

You can display the favorite channel list which contains your favorite channels.

cIndicates the record mode, free space, and elapsed time progress bar.

dIndicates current date and time.

To set a favorite program, use [Program Edit] option in the Setup menu. (page

15.)

eIndicates program title, start time, end time, etc.

(Extended Text Message Icon): Indicates that there is an Extended

Text Message available to provide detailed descriptions of the program

(see page 25).

(DTV Subtitle Icon): Indicates that the current program contains the

subtitle.

(Wide Icon): Indicates that the current program is shown in wide

picture format.

(Digital Text Service Icon):

Press FAV while watching a TV. The favorite program list appears.

Press v V to select a desired program then press OK( ) to watch the selected

program.

Indicates that there is a digital text service available (see page 26).

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 25

Switching the EPG menu

Using the digital EPG

The EPG screen provides two search menus.

Press the yellow coloured button when the EPG menu is displayed.

ꢀ Now/Next: This screen shows now and next programs.

ON REMOTE

1 Displays the EPG menu:

GUIDE

2 Select a TV program:

v V

3 Displays the next/previous menu list:

. >

4 Shows the selected program currently on air:

5 Exit the EPG menu:

OK (

)

EPG or BACK (O)

Using the digital EPG - more you can do

About the digital EPG

ꢀ 8 Days: This screen shows programs within 8 days. When the EPG menu

with 8 days is displayed, you can also change the date of the EPG menu by

pressing the green coloured button then use b / B to select the date.

The digital EPG shows a table of scheduled digital TV programs and detailed

information about individual programs. The digital EPG screen consist of

program information, and the channel list.

Note that the unit’s clock must be set to the correct time and date to ensure all

relevant EPG information is displayed.

Displaying the detailed Information window

You can view detailed information for the highlighted program. Press the blue

coloured button to display detailed information window. To exit the detail infor-

mation window, press the blue coloured button again.

You can set a timer record using the 8 days EPG menu. Select a program

then press red coloured button. The options for timer recording will appear.

[Simple Recording]: Records only the selected program.

[Recording series]: Records the programs in series.

[Recording separated program]: Records the subsequent parts of a

program which are separated.

[Recording recommended program]: Records the program if recommended

by broadcaster as a link for the current series.

Select an option then press OK( ). The timer icon will be displayed and the

program will be memorized by the recorder. You can check the programming

on the Timer Record List menu (see page. 31).

To cancel the timer recording, select the program then press the red coloured

button. Select the option again then press OK( ). The timer icon disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 26

Viewing a digital text service

Play a disc

Many digital TV channels broadcast information via their text service. This

digital service includes high quality digital text and graphics along with

advanced navigation options. Additionally, this recorder has access to dedicated

text channels transmitted by the broadcasters. The appearance, content and

navigation methods of all digital text services are decided by the broadcaster.

ON REMOTE

1 Open the disc tray:

2 Insert a disc:

OPEN/CLOSE (Z)

Press TEXT to bring up the text menu for the current channel. Use v / V to

navigate through the menu. Use OK( ) to select an item. Additionally you now

have the four coloured buttons (Red, Green, Yellow and Blue) to navigate

through the content of the page. The use of these coloured buttons will be

displayed on the screen. Press TEXT or BACK (O) to leave the digital text

service.

3 Close the disc tray:

OPEN/CLOSE (Z)

4 Adjust the disc menu settings:

A disc menu may not appears on the screen

depending on the disc.

v V b B, OK (

)

5 Starts playback:

6 Stops playback:

PLAY (N)

STOP (x )

What is FREEVIEW?

FREEVIEW™ gives you over 40 FREEVIEW™ channels with no monthly

subscription.

Play a disc - more you can do

Playing a disc that contains a menu

DVD

To check you’re in a FREEVIEW coverage area, text your postcode to 83331*

or visit www.freeview.co.uk

The menu screen may be displayed after loading a DVD which contains a

menu.

* Costs no more than a normal text. The FREEVIEW service is subject to

coverage.

Use the b / B / v / V buttons to select the title/chapter you want to view, then

press OK( ) to start playback. Press TITLE or MENU/LIST to return to the

menu screen.

The FREEVIEW service is subject to coverage. An aerial upgrade may be required.

The FREEVIEW word and logo are trade marks of DTV Services Ltd and are used

under licence. © DTV Services Ltd 2006.

Skip to the next/previous chapter/track/file

DVD ALL ACD MP3 WMA DivX

Press SKIP (>) to move to the next chapter/track/file.

Press SKIP (.) to return to the beginning of the current chapter/track/file.

Press SKIP (.) twice briefly to step back to the previous chapter/track/file.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 27

Pause a playback

Playing repeatedly

DVD ALL ACD MP3 WMA

Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue

playback.

Press REPEAT repeatedly to select an item to be repeated. The current title,

chapter, folder or track will be played back repeatedly. To return to normal play-

back, press REPEAT repeatedly to select [OFF].

Frame-by-Frame playback

DVD ALL

Repeating a specific portion (A-B)

DVD ALL ACD

Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.

You can advance or back up the picture frame-by-frame by pressing b / B

repeatedly during PAUSE mode.

Press REPEAT to select [A-] at the beginning of the portion you wish to repeat

and press OK( ) at the end of the portion. Your selected portion will be repeat-

ed continually. You cannot select a portion less than 3 seconds.

Fast forward or fast reverse

DVD ALL ACD DivX

To return to normal playback, press REPEAT repeatedly to select [OFF].

Press SCAN (m or M) to play fast forward or fast reverse during playback.

You can change the various playback speeds by pressing SCAN (m or M)

repeatedly. Press PLAY ( N) to continue play at normal speed.

Last Scene Memory

DVD

This unit memorizes the last scene from the last disc that was viewed. The last

scene remains in the memory even if you remove the disc from the player or

switch off the unit. If you load a disc that has the scene memorized, the scene

is automatically recalled.

Hearing a different audio

DVD ALL DivX

Press AUDIO then press b or B repeatedly to hear a different audio language,

audio track or encoding method.

Slow down the playing speed

DVD ALL

While playback is paused, press SCAN(bb or BB) to slow down forward or

reverse playback. You can change the various playback speed by pressing

SCAN (m or M) repeatedly. Press PLAY ( N)to continue play at normal

speed.

Viewing the Title menu

DVD

Press TITLE to displays the title menu or disc menu. If the current DVD title has

a menu, the title menu appears on the screen. Otherwise, the disc menu may

appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 28

Selecting multiple files or folders on the list

Playing DivX movie files

You can select not only a single file but also multiple files using the

MARKER button. Press MARKER at the desired file(s) to select multiple

files.

ON REMOTE

1 Displays the HOME menu:

2 Selects a [MOVIE] option:

HOME

Divx file requirement

b B

Available resolution size: 720x576 (W x H) pixel

DivX file extensions: “.avi”, “.divx”

Playable DivX subtitle: “.smi”, “.srt”, “.sub (Micro DVD format only)”,

“.txt (Micro DVD format only)”

3 Selects an option that contains DivX file:

4 Selects a movie file from the menu:

5 Plays the selected movie file:

6 Stops the playback:

v V, OK (

v V

)

PLAY

STOP

Playable Codec format: “DIV3”, “MP43”, “DIVX”, “DX50”

Playable Audio format: “AC3”, “PCM”, “MP2”, “MP3”, “WMA”

Sampling frequency: within 8-48 kHz (MP3), within 32-48kHz (WMA)

Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)

Playing a DivX movie files - more you can do

Movie List menu options

CD-R Format: ISO 9660 and JOLIET.

DVD R/RW Format: ISO 9660 (UDF Bridge format)

Maximum Files/Disc: Less than 1999 (total number of files and folders)

Select which file you would like to show from the menu and press OK( ). An

option menu will appear on the left side of the screen.

Notes on DivX format

ꢀ

The DivX subtitle file name has to be identified with the DivX file name to be

displayed on the DVD recorder.

If the subtitle file does not display properly, change the language code in the

[DivX Subtitle] option. (page 19)

If the number of the screen frame is over 29.97 frames per second, the DVD

recorder may not operate normally.

If the video and audio structure of the DivX file is not interleaved, the audio

and video output may not be matched properly.

If the DivX file name is not readable on this DVD recorder, it may be dis-

played as “_” mark.

If the bitrate of a DivX file stored on a USB device is over 4Mbps, the file

may not be played correctly.

[Play]: Starts playback the selected file.

[Open]: Opens the folder and a list of files in the folder appears.

Displaying movie file information

Press INFO (i) to show to file information on the highlighted file in the movie list.

Selecting all files and folders on the current list

If you want to select all files and folders on the list, press CLEAR at any

file or folder on the list. Press CLEAR again to deselect files and folders.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 29

Selecting all files and folders on the current list

Listening to a music

If you want to select all files and folders on the list, press CLEAR on any

file or folder on the list. Press CLEAR again to deselect the files or folders.

This function is not available for Audio CD.

ON REMOTE

1 Displays the HOME menu:

2 Select a [MUSIC] option:

HOME

Displaying MP3/WMA file information

b B

Press INFO (i) while on file you wish to show the file information. This DVD

recorder will shows the ID3-Tag information of the file. If the file does not have

ID3-Tag information, [ID3-Tag: None] appears on the screen.

3 Selects an option that contains music:

4 Selects a music from the menu:

5 Plays the selected music:

v V, OK (

v V

)

PLAY

MP3/WMA audio file requirement

6 Stops the playback:

STOP

File extensions: “.mp3”, “.wma”.

Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)

Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)

CD-R Format: ISO 9660 and JOLIET.

Listening to a music - more you can do

Music List menu options

Select which file/track you would like to play from the menu and press OK( ).

The menu will appears on the left side of the screen.

DVD R/RW Format: ISO 9660 (UDF Bridge format)

Maximum Files/Disc: Less than 1999 (total number of files and folders)

Creating your own program

You can play the contents in the order you want by arranging the order of the

music. The program is cleared when you exit the [Music List] screen.

To add or erase a music(s) on the program list, press MENU/LIST to display the

[Program List].

Select a desired file/track from the [Music List] then press OK( ). If you want to

select multiple files/tracks, press MARKER on the every desired files/tracks.

Select the [Program Add] option then press OK( ) to add the selected

files/tracks to the [Program List]. Select a file/track from the [Program List] then

press PLAY to start the programmed playback.

Audio CD

MP3/WMA

[Play]: Starts playback the selected file/track.

[Random]: Starts or stops random playback.

[Open]: Opens the folder and a list of files in the folder appears.

[Program Add]: Adds a file(s)/track(s) to [Program List].

You can change the playing order using [Move] option on the program list

menu.

Erasing tracks/files from Program List

Selecting multiple files or folders on the list

To delete a file/track from the program list, select the file/track you wish to

delete then press OK( ). An option menu will appear on the left side of the screen.

Select the [Delete] option then press OK( ) to erase the file/track from the list.

You can select not only single file but also multiple files using the

MARKER button. Press MARKER on the desired file(s) to select multiple

files.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 30

Skip to the next/previous photo

Viewing a photo

Press SKIP (. or >) to view the previous/next photo when the photo is

fully displayed on the screen.

ON REMOTE

Rotate a photo

1 Displays the HOME menu:

2 Selects a [PHOTO] option:

HOME

Use vV to rotate the photo when the photo is fully displayed on the screen.

Viewing photo files as a slide show

b B

3 Selects an option that contains photo file:

4 Selects a photo from the list:

v V, OK (

v V b B

PLAY

)

To slide show photos in the [Photo list], select the [Slide Show] option on the left

side of the screen then press OK( ), The [Slide Show] menu appears on the

screen. Set the [Object] and [Speed] options then press OK( ) while [Start]

option is selected. The slide show will now begin.

5 Displays the selected photo in full screen:

6 Returns to the Photo List:

STOP

[Object] option:

ꢀ[Selected] Views slide show only selected files.

Use the MARKER button to select multiple files.

ꢀ[All] Views slide show all files.

Viewing a photo - more you can do

Photo List menu options

[Speed] option:

Sets the Slide Show speed to [Slow], [Normal], or [Fast].

Select which file you would like to show from the menu and press OK( ).

A menu appears on the left side of the screen.

Pause a slide show

Press PAUSE/STEP to pause a slide show. Press PLAY to continue the slide

show.

Photo file requirement

File extension: “.jpg”

Photo size: Less than 4MB recommended

CD-R Format: ISO 9660 and JOLIET.

DVD R/RW Format: ISO 9660 (UDF Bridge format)

Maximum Files/Disc: Less than 1999 (total number of files and folders)

Notes on JPEG file

[Full Screen]: Shows the selected file in full screen.

[Open]: Opens the folder and a list of files in the folder appears.

[Slide Show]: Displays the [Slide Show] menu.

ꢀ

Progressive and lossless compression JPEG image files are not supported.

Depending on the size and number of the JPEG files, it may take several

minutes to read the contents of the media.

Selecting all files and folders on the current list

If you want to select all files and folders on the list, press CLEAR on any

file or folder on the list. Press CLEAR again to deselect files and folders.

Selecting multiple files or folders on the list

You can select not only a single file but also multiple files using the

MARKER button. Press MARKER at the desired file(s) to select multiple

files.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 31

Setting a timer record

Recording

Follow the instruction below to record a TV channel or

other source. The recording continues until the media

is full, you stop the recording or the progress of

recording is more than 12 hours.

This DVD recorder can be programmed to record up to 16 recordings within a

month. The clock must be set correctly before setting a recording.

ON REMOTE

Selects a recording mode:

HOME,

You can select a recording mode on the

v V b B,

Press HOME and select [Record] option. Press v V to select the

[Timer Record] and press OK( ) to display [Timer record List] menu. Use v V

to select [New] and press OK( ) to display [Timer Record] menu. Adjust each

field as described below using v V b B.

SETUP menu. (XP, SP, LP, EP or MLP)

OK (

)

Selects a channel or source you want to record: PR(+/-), AV

Starts recording:

Stops recording:

REC

[Media]: This option is not selectable.

STOP

[CH/PR]: Choose a memorized program number, or one of the external

inputs from which to record. (You cannot select DV input and radio channel.)

[Date]: Choose a date up to 1 month in advance.

[Start Time]: Set the start time.

[End Time]: Set the end time.

[Repeat] Choose a desired repeat (Once, Daily (Mon-Fri), or Weekly).

Recordings from EPG menu will always be set to [Once].

Recording - more you can do

Changing TV audio channel

Before recording, you can change the TV audio channel for stereo and bilingual

broadcast. Press AUDIO repeatedly to change the audio channel. The current

audio channel is displayed on-screen. Set the [TV Rec Audio] option in the

SETUP menu when recording a bilingual broadcast.

Press REC repeatedly to set the recording mode (XP, SP, LP, EP or MLP) then

press OK( ) to set a timer recording. The “Rec OK” or “OK” on the [Check]

field on the [Timer Record List] menu indicates the timer recording is

programmed correctly.

Instant timer recording

This feature will allow you to instantly record a programme for a preset time.

When the REC is first pressed, recording starts. Press REC repeatedly to select

the desired time. Each press of REC to will increase recording time on-screen.

You can set the instant timer recording up to 720 minutes on DVD, depending

on the free space available.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 32

Canceling a timer recording

Editing a title

Using the Title list menu,you can edit video contents.

You can cancel a timer recording before the timer actually starts. Select a timer

recording that you want to cancel on the [Timer Record List] menu and press

CLEAR.

ON REMOTE

Displays a [Title List] menu:

MENU/LIST

Timer Recording Troubleshooting

Selects a title you want to edit:

v V b B

Even though the timer is set, the unit will not record when:

– There is no disc loaded.

– A non-recordable disc is loaded.

Displays an editing menu:

The options are differ depending on the media type.

OK (

)

–

[Disc Protect] option is set to [ON] in the Setup menu.(see page 21).

Selects a menu option:

Exit the [Title List] menu:

v V b B, OK (

)

– The DVD recorder operating a function (recording, deleting etc.).

– There are already 99 titles (DVD-RW, DVD-R) or 49 titles (DVD+R,

DVD+RW) recorded on the disc.

BACK (O)

You cannot enter a timer program when:

– A recording is already underway.

– The time you’re trying to set has already passed.

– There are 16 timer programs set.

If two or more timer programs overlap:

Editing a title - more you can do

About title list menu

Press MENU/LIST to display the Title List menu. Playback should be stopped

when you do this. You can also access it using HOME menu, select [MOVIE]

option then select [DISC] option and press OK( ). If you are editing a VR

mode disc, press MENU/LIST to switch between Original and Playlist menu.

– The earlier program takes priority.

– When the earlier program finishes, the later program starts.

– If two programs are set to start at exactly the same time, the program

entered first takes priority.

Recording from a digital camcorder

You can record from a DV-equipped camcorder to the DVD by connecting it with

a DV cable. You can also record from a digital camcorder connected to the DV

in jack on the front of the unit. Press AV repeatedly to select the DV input. Find

the place on the camcorder recording that you want to begin recording from and

press REC on the DVD recorder to start recording. Depending on your cam-

corder, you can use this DVD recorder’s remote to control the camcorder using

the STOP, PLAY and PAUSE functions. Press STOP to end recording.

aCurrent media

bIndicates the record mode, free space, and elapsed time.

Recording from external inputs

cMenu options: To display menu option, select a title or chapter then press

You can record from an external component, such as a camcorder or VCR,

connected to any of the recorder’s external inputs.

Each press of the AV button changes the input source as described below.

Make sure that the component you want to record from is connected properly to

the DVD recorder before recording an external source.

OK( ). The options displayed differ depending on the disc type.

dCurrently selected title.

eThumbnail

fShows the title name, recorded date, and recording length.

ꢀ

Tuner: Built-in tuner

AV1: AV1 scart jack mounted on back panel

AV2: AV2 DECODER scart jack mounted on back panel

AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel

DV: DV IN mounted on front panel

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 33

Before editing

Chapter search

-RW

Video

-RW

+RW +R

-R

RAM

This DVD recorder offers various editing options for various disc types. Before

you edit, check the disc type, and select the option available for your disc.

You can select the start of a title by searching a chapter. Select a title that you

want to search and press OK( ). Select [Chapter] in the [Search] option from

the menu on the left of the screen, and press OK( ) to display the [Chapter

List] menu.

You can enjoy advanced editing functions with VR mode formatted DVD (DVD-

RW or DVD-RAM). Editing either the original recording(called the “original”), or

the playback information created from the original (called a “Playlist”).

Edits made to the original titles are final. If you plan to edit a title without editing

the original title, you can create a Playlist title for editing.

Use v V b B to find the chapter you wish to playback, and press PLAY to start

playback.

A Playlist is a group of Playlist titles created from the original title for editing

purpose.

Making a new Playlist

-RW

RAM

The Playlist allows you to edit or re-edit a title or chapter without changing the

Original recordings. Use this function to add an Original title or chapter to a new

Playlist or the registered Playlist.

Titles in the disc’s original content contain one or more chapters. When you

insert a disc’s title into the Playlist, all the chapters within that title also appear.

In other words, chapters in the Playlist behave exactly as chapters on a DVD-

Video disc do. From the Original and Playlist menu you can add or delete parts.

Adding a chapter or title to the Playlist creates a new title made up of a section

(ie., chapter) of an Original title. Deleting a part removes part of a title from the

Original or Playlist menu.

Adding chapter markers

-RW

+RW +R RAM

You can create chapters within a title by inserting chapter marks at the desired

point. Press MARKER at the desired point whilst playing back or recording.

A chapter marker icon appears on the screen.

Select an Original title or chapter that you want to put into the Playlist then

press OK( ). Select the [Playlist Add] option and then press OK( ) to display

the [Select PlayList] menu. Choose a PlayList-title that you want to put the

selected Original title or chapter to, or select the [New PlayList] to create a new

Playlist.

The chapter markers can be added at regular intervals automatically by setting

the [Auto Chapter] option in the SETUP menu.

Deleting a title or chapter

When you delete a title or chapter from the Playlist, the title or chapter in the

Original still remains. However, if you delete a chapter or title from the Original,

the title or chapter deleted from the Original are also removed from Playlist.

Moving a Playlist chapter

-RW

RAM

Use this function to re-arrange the playing order of a Playlist title on the

[Chapter List-Playlist] menu. Select [Move] option from the menu on the left of

the [Chapter List-Playlist] screen and press OK( ). Use v V b B to choose the

place you wish to move the chapter then press OK( ). The updated menu is

displayed.

Select a title or chapter that you wish to delete and press OK( ). Select

[Delete] option from the menu on the left of the screen and press OK( ) to

confirm.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 34

Time search

-RW

Video

-RW

Protect a title

-RW

+RW +R

-R

RAM

+RW +R RAM

You can select the start of a title by searching through the time duration. Select

a title that you wish to search and press OK( ). Select [Time] in the [Search]

option from the menu on the left of the screen and press OK( ) to display the

[Search] menu.

Use this function to protect a title against accidental recording, editing or delet-

ing. Select a title you want to protect and press OK( ). Select [Protect] option

from the menu on the left and press OK( ). The lock mark will appear on the

title thumbnail.

If you want to unprotect the title, select the protected title and press OK( ).

Select [Unprotect] option from the menu on the left and press OK( ) to unpro-

tect it.

Deleting a part

-RW

RAM

You can delete a part which you do not want in the title.

Select a title that you wish to delete part and press OK( ). Select [Delete Part]

in the [Edit] option from the menu on the left of the screen and press OK( ) to

display the [Delete part] menu. You can find the point using PLAY, SCAN,

PAUSE/STEP buttons.

Use b B to find the time you want to start. Each press of b B moves 1 minute

or press and hold b B to moves 5 minutes. Press OK( ) to watch a title from a

selected time.

[Start Point]: Select starting point of a part that you wish to delete then press

OK( ).

[End Point]: Select ending point of a part that you wish to delete then press

OK( ).

Hiding a chapter or title

+RW +R

You can skip through a chapter or title without actually deleting them. Select a

chapter or title you want to hide and press OK( ). Select [Hide] in the [Edit]

option then press OK( ).

[Cancel]: Press OK( ) to cancel the selected part.

[Done]: Press OK( ) to delete the selected part.

Combining chapters

-RW

+RW +R RAM

If you want to recover the hidden title or chapter, select the hidden title or chap-

ter and press OK( ). Select [Show] in the [Edit] option then press OK( ) to

recover it.

Use this function to merge the selected chapter with adjacent chapter. Select a

chapter and press OK( ). Select [Combine] option to view combine indicator

between two chapter thumbnails. Press OK( ) to combine the indicated two

chapters.

Dividing a title

+RW

Use this function to split a title up into two titles. Select a title that you want to

divide and press OK( ). Select [Divide] in the [Edit] option from the menu on

the left of the screen and press OK( ) to display the [Divide] menu. Find the

point you wish to divide a title using PLAY, SCAN, PAUSE/STEP buttons and

press OK( ). The playback screen shows the divided point. Select [Done]

option and press OK( ) to divide. You cannot select a dividing point if it is less

than 3 seconds.

This function is not available in conditions as listed below.

ꢀ There is only one chapter within the title.

ꢀ The first chapter is selected.

ꢀ The chapters that you want to combine are created by deleting a part from

the Original title.

ꢀ The chapters that you want to combine are created from different titles.

ꢀ One of the Playlist chapters that you want to combine has been moved.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 35

Using the Disc menu

Viewing Title List menu displayed on another unit

+RW +R

Using the title list menu in DVD mode, you can use the disc setting functions

without entering the SETUP menu.

You can view the Title List menu displayed on the another unit that is capable

of playing DVD+RW or DVD+R discs.

Press TITLE in play or stop mode. Title List menu will appears on the screen.

When the TITLE button is not available due to the digital broadcasts, press and

hold the MENU/LIST for 3 seconds to display the Title List.

Naming a title

When a title is recorded by this unit, the title name will be named by a number.

You can change a title name by using this function.

Use v V b B to select the [Disc] option on the DVD title list menu and then

press OK( ) to show further options.

[Disc Format]: Format the inserted disc. (page 21)

[Finalize]: Finalize the inserted disc. (page 21)

[Unfinalize]: Unfinalize the inserted disc. (page 21)

[Disc Label]: Use this to enter a name for the disc. This name appears when

you load the disc and disc information on-screen. (page 21)

[Protect]: Use this to prevent accidental recording, editing, deleting of the

inserted disc. (page 21)

Select the title you wish to change the name and press OK( ). Select [Title

Name] option from the menu on the left of the screen and press OK( ) to

display the keyboard menu. Use v V b B to select a character then press

OK( ) to confirm your selection on the keyboard menu.

[Unprotect]: Release the protect function.

Overwriting

+RW

[OK]: Finish the naming.

[Cancel]: Cancels all entered characters.

[Space]: Inserts a space at the cursor position.

[Delete]: Deletes the previous character at the cursor position.

You can overwrite a new video recording on a recorded title that is not protect-

ed. Select the TV channel or input source you want to record. Press

MENU/LIST to display the Title List menu. Use v V b B to highlights a title

you want to overwrite and then press REC to start overwrite. To stop the

recording, press STOP.

You can use shortcuts on the remote control to enter a name.

PLAY (N): Inserts a space at the cursor position.

If you overwrite the longer recording than the current title on the fully recorded

disc, the next title is overwritten. If next title is protected, the overwriting stops

at the starting point of the title.

X (PAUSE/STEP): Deletes a character behind the cursor position.

x (STOP), CLEAR: Deletes the previous character at the cursor position.

. / >: Moves the cursor to left or right.

MENU/LIST, INFO (i): Changes the character set on the keyboard menu.

Numbers (0-9): Enters the corresponding character at the cursor position.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 36

Language Codes

Use this list to input your desired language for Disc Audio, Disc Subtitle and Disc Menu.

Language

Afar

Afrikaans

Albanian

Ameharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali; Bangla

Bhutani

Bihari

Breton

Code

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

9072

Language

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Fiji

Finnish

French

Frisian

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Code

7282

6783

6865

7876

6978

6979

6984

7079

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

Language

Hausa

Hebrew

Hindi

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Code

7265

7387

7273

7285

7383

7378

7365

7165

7384

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Language

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maori

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian

Oriya

Code

7678

7684

7775

7771

7783

7776

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

Language

Quechua

Rhaeto-Romance 8277

Rumanian

Russian

Samoan

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Shona

Sindhi

Singhalese

Slovak

Slovenian

Spanish

Sudanese

Swahili

Swedish

Tagalog

Code

8185

Language

Tajik

Tamil

Telugu

Thai

Tonga

Turkish

Turkmen

Twi

Code

8471

8465

8469

8472

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

8279

8285

8377

8365

7168

8382

8372

8378

8368

8373

8375

8376

6983

8385

8387

8386

8476

Italian

Ukrainian

Urdu

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Korean

Kurdish

Laothian

Latin

Uzbek

Vietnamese

Volapük

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Panjabi

Pashto, Pushto

Persian

Polish

Portuguese

Bulgarian

Burmese

Byelorussian

Chinese

Latvian, Lettish

Area Codes

Choose an area code from this list.

Area

Code

Area

Costa Rica

Croatia

Czech Republic

Denmark

Ecuador

Egypt

El Salvador

Ethiopia

Fiji

Finland

France

Germany

Great Britain

Greece

Code

Area

Code

Area

Maldives

Mexico

Monaco

Mongolia

Morocco

Nepal

Netherlands

Netherlands Antilles AN

New Zealand

Nigeria

Norway

Oman

Pakistan

Panama

Code

Area

Code

Area

Code

Afghanistan

Argentina

Australia

Austria

Belgium

Bhutan

Bolivia

Greenland

Hong Kong

Hungary

India

Indonesia

Israel

Italy

Jamaica

Japan

Kenya

Kuwait

Libya

Luxembourg

Malaysia

Paraguay

Philippines

Poland

Portugal

Romania

Russian Federation RU

Saudi Arabia

Senegal

Singapore

Slovak Republic

Slovenia

South Africa

South Korea

Spain

Sri Lanka

Sweden

Switzerland

Taiwan

Thailand

Turkey

Uganda

Ukraine

Brazil

Cambodia

Canada

Chile

China

Colombia

Congo

United States

Uruguay

Uzbekistan

Vietnam

Zimbabwe

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 37

Playback

Troubleshooting

The unit does not start playback.

General

b Insert a playable disc. (Check the disc type, colour system, and regional

code.)

The power does not turn on.

b Place the disc with the playback side down.

b Place the disc on the disc tray correctly inside the guide.

b Clean the disc.

b Cancel the Rating function or change the rating level.

Cannot play a disc recorded using this unit on other player.

b Finalize the disc.

b Check the disc compatibility of the player.

b Place the disc on the disc tray correctly inside the guide.

b Discs recorded with copy-once material cannot be played on other

players.

b Plug the power cord into the wall outlet securely.

There is no picture.

b Select the appropriate video input mode on the TV so the picture from the

unit appears on the TV screen.

b Connect the video connection securely.

b Check the [Video Output Format] in SETUP menu is set to the appropri-

ate item that conforms to your video connection.

Picture noise appears.

b You are playing a disc recorded in a colour system that is different form

your TV.

b The video signal from the external component is copy-protected.

The angle cannot be changed.

b Set the resolution which your TV accepts.

b Multi-angles are not recorded on the DVD Video being played.

b The angle cannot be changed for the titles recorded on this unit.

The channel is not found or stored.

b Check your antenna connection.

The subtitle language cannot be changed or turned off.

b Subtitles are not recorded on the DVD Video being played.

There is no sound.

b Connect the audio connection securely.

b The subtitle cannot be changed for the titles recorded on this unit.

b The input source setting on the amplifier or the connection to the amplifier

Cannot play MP3/WMA/JPEG/DivX files.

b The files are not recorded in a format that the unit can play.

b The unit does not support the codec of the DivX movie file.

is incorrect.

b The unit is in scan, slow motion, or pause mode.

The remote control does not work properly.

b The resolution is higher than the unit can support.

b The remote control is not pointed at the remote sensor of the unit.

b The remote control is too far from the unit.

b There is an obstacle in the path of the remote control and the unit.

b The batteries in the remote control are exhausted.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 38

Recording

b If your TV is not equipped with DTS decoder, set the [DTS] options to

[OFF] on the setup menu. To enjoy DTS multi channel surround, you must

connect this unit to a DTS compatible receiver via one of this unit’s digital

audio outputs.

Cannot record or does not record successfully.

b Check the remaining space on the disc.

b Check that the source you are trying to record in not copy protected.

b The power may have failed during recording.

Resetting the unit

b Use a VR mode formatted disc for copy-once material.

If you observe any of the following symptoms.

Timer record does not record successfully.

b Clock is not set to correct time.

b The start time of the timer recording is past.

ꢀ

The unit is plugged in, but the power will not turn on or off.

The front panel display is not working.

The unit is not operating normally.

b Two timer recordings may have overlapped, in which case only the earlier

You can reset the unit as follows.

one will record completely.

ꢀ

Press and hold the POWER button for at least five seconds. This will

b When setting the recording channel, make sure you set the unit’s built-in

tuner, not the TV’s built-in tuner.

force the unit to power off then turn the unit back on.

ꢀ

Unplug the power cord, wait at least five seconds, and then plug it in

Stereo Audio Record and/or Playback is not present.

b TV is not Stereo-compatible.

again.

b Broadcast program is not in stereo format.

b The A/V Output jacks on the unit are not connected to TV A/V In jacks.

HDMI

The connected HDMI device does not display any picture.

b Try disconnecting then reconnecting the HDMI cable.

b Try switching the power of the HDMI device off then back on.

b The video input of the connected device is set correctly for this unit.

b The HDMI cable you are using is fully HDMI-compliant . Using a non-stan-

dard cable may result in no picture being output.

b Not all HDCP-compatible DVI devices will work with this unit.

The connected HDMI device does not output sounds.

b Some HDMI-compatible devices do not output sounds (check the manual

that came with the connected device).

b If your TV is not capable of handling 96 kHz sampling frequency, set the

[Sampling Freq.] option to [48 kHz] on the setup menu. When this choice

is made, this unit will automatically convert any 96 kHz signals to 48 kHz

so your system can decode them.

b If your TV is not equipped with Dolby Digital and MPEG decoder, set the

[Dolby Digital] and [MPEG] options to [PCM] on the setup menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 39

Playback

Specifications

General

Frequency response

DVD (PCM 48 kHz): 8 Hz to 22 kHz,

CD: 8 Hz to 20 kHz

Power requirements

Power consumption

Dimensions (approx.)

Net weight (approx.)

Operating temperature

Operating humidity

Television system

AC 200-240V, 50/60 Hz

DVD (PCM 96 kHz): 8 Hz to 44 kHz

More than 90 dB (AUDIO OUT connector)

Less than 0.02% (AUDIO OUT connector)

18W

Signal-to-noise ratio

Harmonic distortion

430 X 49 X 245 mm (w x h x d) without foot

2.6 kg

Inputs

5˚C to 35˚C

ANTENNA IN

VIDEO IN

Antenna input, 75 ohms

5 % to 65 %

1.0 Vp-p 75 ohms, sync negative, RCA jack x 1

/ SCART x 2

Analog: PAL I, B/G, I/I, SECAM D/K, K1

colour system

AUDIO IN

2.0 Vrms more than 47 kohms, RCA jack

(L, R) x 1 / SCART x 2

Digital: DVB-T Standard Compliant

PAL

Recording format

DV IN

4 pin (IEEE 1394 standard)

4 pin (USB 1.1 standard)

Recording

USB IN

Recording format

Recordable media

DVD Video Recording, DVD-VIDEO

DVD-RW, DVD-R, DVD+RW, DVD+R,

DVD+R(Double Layer), DVD-RAM

DVD (4.7GB): Approx. 1 hour (XP mode),

2 hours (SP mode), 4 hours (LP mode),

6 hours (EP mode), 14 hours (MLP mode)

DVD+R DL (8.5GB): Approx. 3 hours

(XP mode), 3.8 hours (SP mode),

7.3 hours (LP mode), 9.1 hours (EP mode),

21 hours (MLP mode)

Outputs

VIDEO OUT

1 Vp-p 75 Ω, sync negative, SCART x 2

(Y) 1.0 V (p-p), 75 Ω, sync negative,

Mini DIN 4-pin x 1(C) 0.3 V (p-p) 75 Ω

S-VIDEO OUT

Recordable time

COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, sync negative,

RCA jack x 1, (PB)/(PR) 0.7 V (p-p), 75 Ω,

RCA jack x 2

HDMI video/audio output

Audio output (digital audio)

19 pin (HDMI standard, Type A)

0.5 V (p-p), 75 Ω, RCA jack x 1

Audio output (optical audio) 3 V (p-p), Optical connector x 1

Audio output (analog audio) 2 Vrms (1 kHz, 0 dB), 600 Ω,

RCA jack (L, R) x 1 / SCART x 2

Video recording format

Sampling frequency

Compression format

Audio recording format

Sampling frequency

Compression format

27MHz

MPEG2

Accessories

48kHz

Scart cable (1), RF cable (1), Remote control (1), Battery (1)

Dolby Digital

ꢀ

Design and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 40

Technology with the human touch

GUARANTEE

●

REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:

●

LG Electronics U.K. Ltd. will provide the following services in order to

expedite this Guarantee.

RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY

OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME GUAR-

ANTEE SERVICE IS PROVED.

1. All faulty components which fail due to defective manufacture will be

replaced free of charge for a period of 12 months from the original date

of purchase.

●

Product Registration Card :

It is helpful to complete at least

your name, address, phone, model

& serial numbers and return it. This

will enable LG to assist you in the

future should you lose your receipt,

your units be stolen, or should

modifications be necessary.

2. The dealer (or his service agent) who sold the product will be

reimbursed for any labour provided in the repair of this LG equipment,

for a period of 12 months from the original date of purchase.

These claims must be made in accordance with the published scale of

service charges and relevant claims procedure.

PLEASE NOTE:

●

To obtain information or assistance:Call 0870 873 5454 Monday-Friday

9.00am-4.30pm

A. The dealer may restrict the guarantee to the original purchaser.

B. The dealer is not obliged to carry out service under guarantee if

unauthorized modifications are made to the apparatus, or if non

standard components are used or if the serial number of the

apparatus is removed, defaced, misused, or altered.

MODEL NO.*

SERIAL NO.*

DATE OF PURCHASE.*

Please complete for your own record

C. Any claims made under guarantee must be directed to the dealer from

whom the equipment was originally purchased. The dealer may, before

carrying out service under guarantee, require a receipted account as

evidence of the date of purchase.

In all cases of difficulty - consult your LG dealer

from whom the product was purchased

D. We respectfully point out that your dealer is not obligated to replace

batteries if they become exhausted or worn in use.

LGEUK Website : www.lge.co.uk

( service website : www.lgelectronics.co.uk )

E. Aerial alignment and consumer control adjustments are not covered by

this guarantee.

This guarantee does not affect your statutory rights.

Download from Www.Somanuals.com. All Manuals Search And Download.

LaCie Computer Drive Safe Biometric User Manual
Lennox Hearth Indoor Fireplace C160 User Manual
Lexicon Power Supply Converter User Manual
LG Electronics Personal Computer M197WA User Manual
Lightolier Indoor Furnishings 1001FEM Series User Manual
Mackie Musical Instrument 1202 VLZ3 User Manual
Makita Grinder GD0602 User Manual
Maytag Clothes Dryer MED5870TW1 User Manual
McCulloch Lawn Mower M6553CMD User Manual
Metra Electronics Car Stereo System 99 7013 User Manual